Add option to set when the perf buffer should wake up, by default the
perf buffer becomes signaled for every event that is being pushed to it.
In case of a high throughput of events it will be more efficient to wake
up only once you have X events ready to be read.
So your application can wakeup once and drain the entire perf buffer.
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230207081916.3398417-1-arilou@gmail.com
In a previous commit, Ubuntu kernel code version is correctly set
by retrieving the information from /proc/version_signature.
commit<5b3d72987701d51bf31823b39db49d10970f5c2d>
(libbpf: Improve LINUX_VERSION_CODE detection)
The /proc/version_signature file doesn't present in at least the
older versions of Debian distributions (eg, Debian 9, 10). The Debian
kernel has a similar issue where the release information from uname()
syscall doesn't give the kernel code version that matches what the
kernel actually expects. Below is an example content from Debian 10.
release: 4.19.0-23-amd64
version: #1 SMP Debian 4.19.269-1 (2022-12-20) x86_64
Debian reports incorrect kernel version in utsname::release returned
by uname() syscall, which in older kernels (Debian 9, 10) leads to
kprobe BPF programs failing to load due to the version check mismatch.
Fortunately, the correct kernel code version presents in the
utsname::version returned by uname() syscall in Debian kernels. This
change adds another get kernel version function to handle Debian in
addition to the previously added get kernel version function to handle
Ubuntu. Some minor refactoring work is also done to make the code more
readable.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Signed-off-by: Ho-Ren (Jack) Chuang <horenchuang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230203234842.2933903-1-hao.xiang@bytedance.com
Extend bpf_xdp_query routine in order to get XDP/XSK supported features
of netdev over route netlink interface.
Extend libbpf netlink implementation in order to support netlink_generic
protocol.
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/a72609ef4f0de7fee5376c40dbf54ad7f13bfb8d.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_PROBE_READ_INTO() and BPF_PROBE_READ_STR_INTO() should map to
bpf_probe_read() and bpf_probe_read_str() respectively in order to work
correctly on architectures with !ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-24-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Loading programs that use bpf_usdt_arg() on s390x fails with:
; if (arg_num >= BPF_USDT_MAX_ARG_CNT || arg_num >= spec->arg_cnt)
128: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
129: (25) if r1 > 0xb goto pc+83 ; frame1: R1_w=scalar(umax=11,var_off=(0x0; 0xf))
...
; arg_spec = &spec->args[arg_num];
135: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
...
; switch (arg_spec->arg_type) {
139: (61) r1 = *(u32 *)(r2 +8)
R2 unbounded memory access, make sure to bounds check any such access
The reason is that, even though the C code enforces that
arg_num < BPF_USDT_MAX_ARG_CNT, the verifier cannot propagate this
constraint to the arg_spec assignment yet. Help it by forcing r1 back
to stack after comparison.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-23-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This fixes the doxygen format documentation above the
user_ring_buffer__* APIs. There has to be a newline
before the @brief, otherwise doxygen won't render them
for libbpf.readthedocs.org.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230126024749.522278-1-grantseltzer@gmail.com
In a prior change, the verifier was updated to support sleepable
BPF_PROG_TYPE_STRUCT_OPS programs. A caller could set the program as
sleepable with bpf_program__set_flags(), but it would be more ergonomic
and more in-line with other sleepable program types if we supported
suffixing a struct_ops section name with .s to indicate that it's
sleepable.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230125164735.785732-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Each architecture supports at least 6 syscall argument registers, so now
that specs for each architecture is defined in bpf_tracing.h, remove
unnecessary macro overrides, which previously were required to keep
existing BPF_KSYSCALL() uses compiling and working.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-26-andrii@kernel.org
Define explicit table of registers used for syscall argument passing.
Note that 7th arg is supported on 32-bit powerpc architecture, by not on
powerpc64.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-20-andrii@kernel.org
Define explicit table of registers used for syscall argument passing.
We need PT_REGS_PARM1_[CORE_]SYSCALL macros overrides, similarly to
s390x, due to orig_x0 not being present in UAPI's pt_regs, so we need to
utilize BPF CO-RE and custom pt_regs___arm64 definition.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-18-andrii@kernel.org
Define explicit table of registers used for syscall argument passing.
Note that we need custom overrides for PT_REGS_PARM1_[CORE_]SYSCALL
macros due to the need to use BPF CO-RE and custom local pt_regs
definitions to fetch orig_gpr2, storing 1st argument.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # s390x
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-16-andrii@kernel.org
Define explicit table of registers used for syscall argument passing.
Remove now unnecessary overrides of PT_REGS_PARM5_[CORE_]SYSCALL macros.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-14-andrii@kernel.org
Set up generic support in bpf_tracing.h for up to 7 syscall arguments
tracing with BPF_KSYSCALL, which seems to be the limit according to
syscall(2) manpage. Also change the way that syscall convention is
specified to be more explicit. Subsequent patches will adjust and define
proper per-architecture syscall conventions.
__PT_PARM1_SYSCALL_REG through __PT_PARM6_SYSCALL_REG is added
temporarily to keep everything working before each architecture has
syscall reg tables defined. They will be removed afterwards.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-13-andrii@kernel.org
Add BPF_UPROBE and BPF_URETPROBE macros, aliased to BPF_KPROBE and
BPF_KRETPROBE, respectively. This makes uprobe-based BPF program code
much less confusing, especially to people new to tracing, at no cost in
terms of maintainability. We'll use this macro in selftests in
subsequent patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-11-andrii@kernel.org
Add PARM6 through PARM8 definitions. Also fix frame pointer (FP)
register definition. Also leave a link to where to find ABI spec.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-9-andrii@kernel.org
Add PARM6 through PARM8 definitions for RISC V (riscv) arch. Leave the
link for ABI doc for future reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Pu Lehui <pulehui@huawei.com> # RISC-V
Link: https://lore.kernel.org/bpf/20230120200914.3008030-8-andrii@kernel.org
Add definitions of PARM6 through PARM8 for powerpc architecture. Add
also a link to a functiona call sequence documentation for future reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-6-andrii@kernel.org
Add registers for PARM6 through PARM8. Add a link to an ABI. We don't
distinguish between O32, N32, and N64, so document that we assume N64
right now.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-5-andrii@kernel.org
Remove invalid support for PARM5 on 32-bit arm, as per ABI. Add three
more argument registers for arm64. Also leave links to ABI specs for
future reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Link: https://lore.kernel.org/bpf/20230120200914.3008030-4-andrii@kernel.org
Add r9 as register containing 6th argument on x86-64 architecture, as
per its ABI. Add also a link to a page describing ABI for easier future
reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230120200914.3008030-3-andrii@kernel.org
Add BPF_KPROBE() and PT_REGS_PARMx() support for up to 8 arguments, if
target architecture supports this. Currently all architectures are
limited to only 5 register-placed arguments, which is limiting even on
x86-64.
This patch adds generic macro machinery to support up to 8 arguments
both when explicitly fetching it from pt_regs through PT_REGS_PARMx()
macros, as well as more ergonomic access in BPF_KPROBE().
Also, for i386 architecture we now don't have to define fake PARM4 and
PARM5 definitions, they will be generically substituted, just like for
PARM6 through PARM8.
Subsequent patches will fill out architecture-specific definitions,
where appropriate.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com> # arm64
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # s390x
Link: https://lore.kernel.org/bpf/20230120200914.3008030-2-andrii@kernel.org
'.' is not allowed in the event name of kprobe. Therefore, we will get a
EINVAL if the kernel function name has a '.' in legacy kprobe attach
case, such as 'icmp_reply.constprop.0'.
In order to adapt this case, we need to replace the '.' with other char
in gen_kprobe_legacy_event_name(). And I use '_' for this propose.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20230113093427.1666466-1-imagedong@tencent.com
As BPF_F_MMAPABLE flag is now conditionnaly set (by map_is_mmapable),
it should not be toggled but disabled if not supported by kernel.
Fixes: 4fcac46c7e ("libbpf: only add BPF_F_MMAPABLE flag for data maps with global vars")
Signed-off-by: Ludovic L'Hours <ludovic.lhours@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230108182018.24433-1-ludovic.lhours@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Since commit 9fc205b413b3("libbpf: Add sane strncpy alternative and use
it internally") introduce libbpf_strlcpy(), thus add strlcpy() to a poison
list to prevent accidental use of it.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/tencent_5695A257C4D16B4413036BA1DAACDECB0B07@qq.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY7X/4wAKCRDbK58LschI
g7gzAQCjKsLtAWg1OplW+B7pvEPwkQ8g3O1+PYWlToCUACTlzQD+PEMrqGnxB573
oQAk6I2yOTwLgvlHkrm+TIdKSouI4gs=
=2hUY
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2023-01-04
We've added 45 non-merge commits during the last 21 day(s) which contain
a total of 50 files changed, 1454 insertions(+), 375 deletions(-).
The main changes are:
1) Fixes, improvements and refactoring of parts of BPF verifier's
state equivalence checks, from Andrii Nakryiko.
2) Fix a few corner cases in libbpf's BTF-to-C converter in particular
around padding handling and enums, also from Andrii Nakryiko.
3) Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better
support decap on GRE tunnel devices not operating in collect metadata,
from Christian Ehrig.
4) Improve x86 JIT's codegen for PROBE_MEM runtime error checks,
from Dave Marchevsky.
5) Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers, from Jiri Olsa.
6) Add proper documentation for BPF_MAP_TYPE_SOCK{MAP,HASH} maps,
from Maryam Tahhan.
7) Improvements in libbpf's btf_parse_elf error handling, from Changbin Du.
8) Bigger batch of improvements to BPF tracing code samples,
from Daniel T. Lee.
9) Add LoongArch support to libbpf's bpf_tracing helper header,
from Hengqi Chen.
10) Fix a libbpf compiler warning in perf_event_open_probe on arm32,
from Khem Raj.
11) Optimize bpf_local_storage_elem by removing 56 bytes of padding,
from Martin KaFai Lau.
12) Use pkg-config to locate libelf for resolve_btfids build,
from Shen Jiamin.
13) Various libbpf improvements around API documentation and errno
handling, from Xin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
libbpf: Return -ENODATA for missing btf section
libbpf: Add LoongArch support to bpf_tracing.h
libbpf: Restore errno after pr_warn.
libbpf: Added the description of some API functions
libbpf: Fix invalid return address register in s390
samples/bpf: Use BPF_KSYSCALL macro in syscall tracing programs
samples/bpf: Fix tracex2 by using BPF_KSYSCALL macro
samples/bpf: Change _kern suffix to .bpf with syscall tracing program
samples/bpf: Use vmlinux.h instead of implicit headers in syscall tracing program
samples/bpf: Use kyscall instead of kprobe in syscall tracing program
bpf: rename list_head -> graph_root in field info types
libbpf: fix errno is overwritten after being closed.
bpf: fix regs_exact() logic in regsafe() to remap IDs correctly
bpf: perform byte-by-byte comparison only when necessary in regsafe()
bpf: reject non-exact register type matches in regsafe()
bpf: generalize MAYBE_NULL vs non-MAYBE_NULL rule
bpf: reorganize struct bpf_reg_state fields
bpf: teach refsafe() to take into account ID remapping
bpf: Remove unused field initialization in bpf's ctl_table
selftests/bpf: Add jit probe_mem corner case tests to s390x denylist
...
====================
Link: https://lore.kernel.org/r/20230105000926.31350-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As discussed before, return -ENODATA (No data available) would be more
meaningful than ENOENT (No such file or directory).
Suggested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221231151436.6541-1-changbin.du@gmail.com
pr_warn calls into user-provided callback, which can clobber errno, so
`errno = saved_errno` should happen after pr_warn.
Fixes: 0745324562 ("libbpf: fix errno is overwritten after being closed.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, many API functions are not described in the document.
Add add API description of the following four API functions:
- libbpf_set_print;
- bpf_object__open;
- bpf_object__load;
- bpf_object__close.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224112058.12038-1-liuxin350@huawei.com
There is currently an invalid register mapping in the s390 return
address register. As the manual[1] states, the return address can be
found at r14. In bpf_tracing.h, the s390 registers were named
gprs(general purpose registers). This commit fixes the problem by
correcting the mistyped mapping.
[1]: https://uclibc.org/docs/psABI-s390x.pdf#page=14
Fixes: 3cc31d7940 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224071527.2292-7-danieltimlee@gmail.com
In the ensure_good_fd function, if the fcntl function succeeds but
the close function fails, ensure_good_fd returns a normal fd and
sets errno, which may cause users to misunderstand. The close
failure is not a serious problem, and the correct FD has been
handed over to the upper-layer application. Let's restore errno here.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Link: https://lore.kernel.org/r/20221223133618.10323-1-liuxin350@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Bump current version for new development cycle to v1.2.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221221180049.853365-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Show the real problem instead of just saying "No such file or directory".
Now will print below info:
libbpf: failed to find '.BTF' ELF section in /home/changbin/work/linux/vmlinux
Error: failed to load BTF from /home/changbin/work/linux/vmlinux: No such file or directory
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221217223509.88254-2-changbin.du@gmail.com
Clang warns on 32-bit ARM on this comparision:
libbpf.c:10497:18: error: result of comparison of constant 4294967296 with expression of type 'size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (ref_ctr_off >= (1ULL << PERF_UPROBE_REF_CTR_OFFSET_BITS))
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Typecast ref_ctr_off to __u64 in the check conditional, it is false on
32bit anyways.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221219191526.296264-1-raj.khem@gmail.com
To resolve a trivial merge conflict with c302378bc1 ("libbpf:
Hashmap interface update to allow both long and void* keys/values"),
where a function present upstream was removed in the perf tools
development tree.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix bug in btf_dump's logic of determining if a given struct type is
packed or not. The notion of "natural alignment" is not needed and is
even harmful in this case, so drop it altogether. The biggest difference
in btf_is_struct_packed() compared to its original implementation is
that we don't really use btf__align_of() to determine overall alignment
of a struct type (because it could be 1 for both packed and non-packed
struct, depending on specifci field definitions), and just use field's
actual alignment to calculate whether any field is requiring packing or
struct's size overall necessitates packing.
Add two simple test cases that demonstrate the difference this change
would make.
Fixes: ea2ce1ba99 ("libbpf: Fix BTF-to-C converter's padding logic")
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20221215183605.4149488-1-andrii@kernel.org
Turns out that btf_dump API doesn't handle a bunch of tricky corner
cases, as reported by Per, and further discovered using his testing
Python script ([0]).
This patch revamps btf_dump's padding logic significantly, making it
more correct and also avoiding unnecessary explicit padding, where
compiler would pad naturally. This overall topic turned out to be very
tricky and subtle, there are lots of subtle corner cases. The comments
in the code tries to give some clues, but comments themselves are
supposed to be paired with good understanding of C alignment and padding
rules. Plus some experimentation to figure out subtle things like
whether `long :0;` means that struct is now forced to be long-aligned
(no, it's not, turns out).
Anyways, Per's script, while not completely correct in some known
situations, doesn't show any obvious cases where this logic breaks, so
this is a nice improvement over the previous state of this logic.
Some selftests had to be adjusted to accommodate better use of natural
alignment rules, eliminating some unnecessary padding, or changing it to
`type: 0;` alignment markers.
Note also that for when we are in between bitfields, we emit explicit
bit size, while otherwise we use `: 0`, this feels much more natural in
practice.
Next patch will add few more test cases, found through randomized Per's
script.
[0] https://lore.kernel.org/bpf/85f83c333f5355c8ac026f835b18d15060725fcb.camel@ericsson.com/
Reported-by: Per Sundström XP <per.xp.sundstrom@ericsson.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-6-andrii@kernel.org
btf__align_of() is supposed to be return alignment requirement of
a requested BTF type. For STRUCT/UNION it doesn't always return correct
value, because it calculates alignment only based on field types. But
for packed structs this is not enough, we need to also check field
offsets and struct size. If field offset isn't aligned according to
field type's natural alignment, then struct must be packed. Similarly,
if struct size is not a multiple of struct's natural alignment, then
struct must be packed as well.
This patch fixes this issue precisely by additionally checking these
conditions.
Fixes: 3d208f4ca1 ("libbpf: Expose btf__align_of() API")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-5-andrii@kernel.org
Turns out C allows to force enum to be 1-byte or 8-byte explicitly using
mode(byte) or mode(word), respecticely. Linux sources are using this in
some cases. This is imporant to handle correctly, as enum size
determines corresponding fields in a struct that use that enum type. And
if enum size is incorrect, this will lead to invalid struct layout. So
add mode(byte) and mode(word) attribute support to btf_dump APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-3-andrii@kernel.org
btf_dump APIs emit unnecessary tabs when emitting struct/union
definition that fits on the single line. Before this patch we'd get:
struct blah {<tab>};
This patch fixes this and makes sure that we get more natural:
struct blah {};
Fixes: 44a726c3f2 ("bpftool: Print newline before '}' for struct with padding only fields")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-2-andrii@kernel.org
This is a small improvement in libbpf_strerror. When libbpf_strerror
is used to obtain the system error description, if the length of the
buf is insufficient, libbpf_sterror returns ERANGE and sets errno to
ERANGE.
However, this processing is not performed when the error code
customized by libbpf is obtained. Make some minor improvements here,
return -ERANGE and set errno to ERANGE when buf is not enough for
custom description.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221210082045.233697-1-liuxin350@huawei.com
Parse USDT arguments like "8@(%rsp)" on x86. These are emmited by
SystemTap. The argument syntax is similar to the existing "memory
dereference case" but the offset left out as it's zero (i.e. read
the value from the address in the register). We treat it the same
as the the "memory dereference case", but set the offset to 0.
I've tested that this fixes the "unrecognized arg #N spec: 8@(%rsp).."
error I've run into when attaching to a probe with such an argument.
Attaching and reading the correct argument values works.
Something similar might be needed for the other supported
architectures.
[0] Closes: https://github.com/libbpf/libbpf/issues/559
Signed-off-by: Timo Hunziker <timo.hunziker@gmx.ch>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221203123746.2160-1-timo.hunziker@eclipso.ch
Current libbpf Makefile does not contain the help command, which
is inconvenient to use. Similar to the Makefile help command of the
perf, a help command is provided to list the commands supported by
libbpf make and the functions of the commands.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221202081738.128513-1-liuxin350@huawei.com
C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.
More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:
enum bpf_stats_type: int;
In C (and I believe it's a GCC extension also), such forward declaration
is simply:
enum bpf_stats_type;
Further, in Linux UAPI this enum is defined in pure C way:
enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }
And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.
To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.
[0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
[1] Closes: https://github.com/libbpf/libbpf/issues/249
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221130200013.2997831-1-andrii@kernel.org
Currently LLVM fails to recognize .data.* as data section and defaults to .text
section. Later BPF backend tries to emit 4-byte NOP instruction which doesn't
exist in BPF ISA and aborts.
The fix for LLVM is pending:
https://reviews.llvm.org/D138477
While waiting for the fix lets workaround the linked_list test case
by using .bss.* prefix which is properly recognized by LLVM as BSS section.
Fix libbpf to support .bss. prefix and adjust tests.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The perf build makes the install_headers target, however, as there is
no action for this target a warning is always produced of:
make[3]: Nothing to be done for 'install_headers'.
Solve this by adding a display of 'INSTALL libbpf_headers'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221117004356.279422-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Coverity is reporting that btf_dump_name_dups() doesn't check return
result of hashmap__find() call. This is intentional, so make it explicit
with (void) cast.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221117192824.4093553-1-andrii@kernel.org
The top two bits of size are used as busy and discard flags, so reject
the reservation that has any of these special bits in the size. With the
addition of validity check, these is also no need to check whether or
not total_size is overflowed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-5-houtao@huaweicloud.com
Similar with the overflow problem on ringbuf mmap, in user_ringbuf_map()
2 * max_entries may overflow u32 when mapping writeable region.
Fixing it by casting the size of writable mmap region into a __u64 and
checking whether or not there will be overflow during mmap.
Fixes: b66ccae01f ("bpf: Add libbpf logic for user-space ring buffer")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-4-houtao@huaweicloud.com
The maximum size of ringbuf is 2GB on x86-64 host, so 2 * max_entries
will overflow u32 when mapping producer page and data pages. Only
casting max_entries to size_t is not enough, because for 32-bits
application on 64-bits kernel the size of read-only mmap region
also could overflow size_t.
So fixing it by casting the size of read-only mmap region into a __u64
and checking whether or not there will be overflow during mmap.
Fixes: bf99c936f9 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-3-houtao@huaweicloud.com
Using page size as max_entries when probing ring buffer map, else the
probe may fail on host with 64KB page size (e.g., an ARM64 host).
After the fix, the output of "bpftool feature" on above host will be
correct.
Before :
eBPF map_type ringbuf is NOT available
eBPF map_type user_ringbuf is NOT available
After :
eBPF map_type ringbuf is available
eBPF map_type user_ringbuf is available
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-2-houtao@huaweicloud.com
Fixed following checkpatch issues:
WARNING: Block comments use a trailing */ on a separate line
+ * other BPF program's BTF object */
WARNING: Possible repeated word: 'be'
+ * name. This is important to be be able to find corresponding BTF
ERROR: switch and case should be at the same indent
+ switch (ext->kcfg.sz) {
+ case 1: *(__u8 *)ext_val = value; break;
+ case 2: *(__u16 *)ext_val = value; break;
+ case 4: *(__u32 *)ext_val = value; break;
+ case 8: *(__u64 *)ext_val = value; break;
+ default:
ERROR: trailing statements should be on next line
+ case 1: *(__u8 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 2: *(__u16 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 4: *(__u32 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 8: *(__u64 *)ext_val = value; break;
ERROR: code indent should use tabs where possible
+ }$
WARNING: please, no spaces at the start of a line
+ }$
WARNING: Block comments use a trailing */ on a separate line
+ * for faster search */
ERROR: code indent should use tabs where possible
+^I^I^I^I^I^I &ext->kcfg.is_signed);$
WARNING: braces {} are not necessary for single statement blocks
+ if (err) {
+ return err;
+ }
ERROR: code indent should use tabs where possible
+^I^I^I^I sizeof(*obj->btf_modules), obj->btf_module_cnt + 1);$
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221113190648.38556-3-tegongkang@gmail.com
We need to pass '*link' to final libbpf_get_error,
because that one holds the return value, not 'link'.
Fixes: 4fa5bcfe07 ("libbpf: Allow BPF program auto-attach handlers to bail out")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221114145257.882322-1-jolsa@kernel.org
GCC 11.3.0 fails to compile btf_dump.c due to the following error,
which seems to originate in btf_dump_struct_data where the returned
value would be uninitialized if btf_vlen returns zero.
btf_dump.c: In function ‘btf_dump_dump_type_data’:
btf_dump.c:2363:12: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2363 | if (err < 0)
| ^
Fixes: 920d16af9b ("libbpf: BTF dumper support for typed data")
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/87zgcu60hq.fsf@gmail.com
A fix for the LLVM compilation error while building bpftool.
Replaces the expression:
_Static_assert((p) == NULL || ...)
by expression:
_Static_assert((__builtin_constant_p((p)) ? (p) == NULL : 0) || ...)
When "p" is not a constant the former is not considered to be a
constant expression by LLVM 14.
The error was introduced in the following patch-set: [1].
The error was reported here: [2].
[1] https://lore.kernel.org/bpf/20221109142611.879983-1-eddyz87@gmail.com/
[2] https://lore.kernel.org/all/202211110355.BcGcbZxP-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c302378bc1 ("libbpf: Hashmap interface update to allow both long and void* keys/values")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221110223240.1350810-1-eddyz87@gmail.com
Resolve forward declarations that don't take part in type graphs
comparisons if declaration name is unambiguous. Example:
CU #1:
struct foo; // standalone forward declaration
struct foo *some_global;
CU #2:
struct foo { int x; };
struct foo *another_global;
The `struct foo` from CU #1 is not a part of any definition that is
compared against another definition while `btf_dedup_struct_types`
processes structural types. The the BTF after `btf_dedup_struct_types`
the BTF looks as follows:
[1] STRUCT 'foo' size=4 vlen=1 ...
[2] INT 'int' size=4 ...
[3] PTR '(anon)' type_id=1
[4] FWD 'foo' fwd_kind=struct
[5] PTR '(anon)' type_id=4
This commit adds a new pass `btf_dedup_resolve_fwds`, that maps such
forward declarations to structs or unions with identical name in case
if the name is not ambiguous.
The pass is positioned before `btf_dedup_ref_types` so that types
[3] and [5] could be merged as a same type after [1] and [4] are merged.
The final result for the example above looks as follows:
[1] STRUCT 'foo' size=4 vlen=1
'x' type_id=2 bits_offset=0
[2] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[3] PTR '(anon)' type_id=1
For defconfig kernel with BTF enabled this removes 63 forward
declarations. Examples of removed declarations: `pt_regs`, `in6_addr`.
The running time of `btf__dedup` function is increased by about 3%.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221109142611.879983-3-eddyz87@gmail.com
An update for libbpf's hashmap interface from void* -> void* to a
polymorphic one, allowing both long and void* keys and values.
This simplifies many use cases in libbpf as hashmaps there are mostly
integer to integer.
Perf copies hashmap implementation from libbpf and has to be
updated as well.
Changes to libbpf, selftests/bpf and perf are packed as a single
commit to avoid compilation issues with any future bisect.
Polymorphic interface is acheived by hiding hashmap interface
functions behind auxiliary macros that take care of necessary
type casts, for example:
#define hashmap_cast_ptr(p) \
({ \
_Static_assert((p) == NULL || sizeof(*(p)) == sizeof(long),\
#p " pointee should be a long-sized integer or a pointer"); \
(long *)(p); \
})
bool hashmap_find(const struct hashmap *map, long key, long *value);
#define hashmap__find(map, key, value) \
hashmap_find((map), (long)(key), hashmap_cast_ptr(value))
- hashmap__find macro casts key and value parameters to long
and long* respectively
- hashmap_cast_ptr ensures that value pointer points to a memory
of appropriate size.
This hack was suggested by Andrii Nakryiko in [1].
This is a follow up for [2].
[1] https://lore.kernel.org/bpf/CAEf4BzZ8KFneEJxFAaNCCFPGqp20hSpS2aCj76uRk3-qZUH5xg@mail.gmail.com/
[2] https://lore.kernel.org/bpf/af1facf9-7bc8-8a3d-0db4-7b3f333589a2@meta.com/T/#m65b28f1d6d969fcd318b556db6a3ad499a42607d
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221109142611.879983-2-eddyz87@gmail.com
Changes de-duplication logic for enums in the following way:
- update btf_hash_enum to ignore size and kind fields to get
ENUM and ENUM64 types in a same hash bucket;
- update btf_compat_enum to consider enum fwd to be compatible with
full enum64 (and vice versa);
This allows BTF de-duplication in the following case:
// CU #1
enum foo;
struct s {
enum foo *a;
} *x;
// CU #2
enum foo {
x = 0xfffffffff // big enough to force enum64
};
struct s {
enum foo *a;
} *y;
De-duplicated BTF prior to this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
[6] STRUCT 's' size=8 vlen=1
'a' type_id=8 bits_offset=0
[7] ENUM 'foo' encoding=UNSIGNED size=4 vlen=0
[8] PTR '(anon)' type_id=7
[9] PTR '(anon)' type_id=6
De-duplicated BTF after this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
Enum forward declarations in C do not provide information about
enumeration values range. Thus the `btf_type->size` field is
meaningless for forward enum declarations. In fact, GCC does not
encode size in DWARF for forward enum declarations
(but dwarves sets enumeration size to a default value of `sizeof(int) * 8`
when size is not specified see dwarf_loader.c:die__create_new_enumeration).
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221101235413.1824260-1-eddyz87@gmail.com
Add support for new cgroup local storage.
Acked-by: David Vernet <void@manifault.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221026042856.673989-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When examining module BTF, it is common to see core kernel structures
such as sk_buff, net_device duplicated in the module. After adding
debug messaging to BTF it turned out that much of the problem
was down to the identical struct test failing during deduplication;
sometimes the compiler adds identical structs. However
it turns out sometimes that type ids of identical struct members
can also differ, even when the containing structs are still identical.
To take an example, for struct sk_buff, debug messaging revealed
that the identical struct matching was failing for the anon
struct "headers"; specifically for the first field:
__u8 __pkt_type_offset[0]; /* 128 0 */
Looking at the code in BTF deduplication, we have code that guards
against the possibility of identical struct definitions, down to
type ids, and identical array definitions. However in this case
we have a struct which is being defined twice but does not have
identical type ids since each duplicate struct has separate type
ids for the above array member. A similar problem (though not
observed) could occur for struct-in-struct.
The solution is to make the "identical struct" test check members
not just for matching ids, but to also check if they in turn are
identical structs or arrays.
The results of doing this are quite dramatic (for some modules
at least); I see the number of type ids drop from around 10000
to just over 1000 in one module for example.
For testing use latest pahole or apply [1], otherwise dedups
can fail for the reasons described there.
Also fix return type of btf_dedup_identical_arrays() as
suggested by Andrii to match boolean return type used
elsewhere.
Fixes: efdd3eb801 ("libbpf: Accommodate DWARF/compiler bug with duplicated structs")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1666622309-22289-1-git-send-email-alan.maguire@oracle.com
[1] https://lore.kernel.org/bpf/1666364523-9648-1-git-send-email-alan.maguire
The reg_name in parse_usdt_arg() is used to hold register name, which
is short enough to be held in a 16-byte array, so we could define
reg_name as char reg_name[16] to avoid dynamically allocating reg_name
with sscanf.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221018145538.2046842-1-xukuohai@huaweicloud.com
Teach libbpf to not add BPF_F_MMAPABLE flag unnecessarily for ARRAY maps
that are backing data sections, if such data sections don't expose any
variables to user-space. Exposed variables are those that have
STB_GLOBAL or STB_WEAK ELF binding and correspond to BTF VAR's
BTF_VAR_GLOBAL_ALLOCATED linkage.
The overall idea is that if some data section doesn't have any variable that
is exposed through BPF skeleton, then there is no reason to make such
BPF array mmapable. Making BPF array mmapable is not a free no-op
action, because BPF verifier doesn't allow users to put special objects
(such as BPF spin locks, RB tree nodes, linked list nodes, kptrs, etc;
anything that has a sensitive internal state that should not be modified
arbitrarily from user space) into mmapable arrays, as there is no way to
prevent user space from corrupting such sensitive state through direct
memory access through memory-mapped region.
By making sure that libbpf doesn't add BPF_F_MMAPABLE flag to BPF array
maps corresponding to data sections that only have static variables
(which are not supposed to be visible to user space according to libbpf
and BPF skeleton rules), users now can have spinlocks, kptrs, etc in
either default .bss/.data sections or custom .data.* sections (assuming
there are no global variables in such sections).
The only possible hiccup with this approach is the need to use global
variables during BPF static linking, even if it's not intended to be
shared with user space through BPF skeleton. To allow such scenarios,
extend libbpf's STV_HIDDEN ELF visibility attribute handling to
variables. Libbpf is already treating global hidden BPF subprograms as
static subprograms and adjusts BTF accordingly to make BPF verifier
verify such subprograms as static subprograms with preserving entire BPF
verifier state between subprog calls. This patch teaches libbpf to treat
global hidden variables as static ones and adjust BTF information
accordingly as well. This allows to share variables between multiple
object files during static linking, but still keep them internal to BPF
program and not get them exposed through BPF skeleton.
Note, that if the user has some advanced scenario where they absolutely
need BPF_F_MMAPABLE flag on .data/.bss/.rodata BPF array map despite
only having static variables, they still can achieve this by forcing it
through explicit bpf_map__set_map_flags() API.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20221019002816.359650-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor libbpf's BTF fixup step during BPF object open phase. The only
functional change is that we now ignore BTF_VAR_GLOBAL_EXTERN variables
during fix up, not just BTF_VAR_STATIC ones, which shouldn't cause any
change in behavior as there shouldn't be any extern variable in data
sections for valid BPF object anyways.
Otherwise it's just collapsing two functions that have no reason to be
separate, and switching find_elf_var_offset() helper to return entire
symbol pointer, not just its offset. This will be used by next patch to
get ELF symbol visibility.
While refactoring, also "normalize" debug messages inside
btf_fixup_datasec() to follow general libbpf style and print out data
section name consistently, where it's available.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221019002816.359650-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When there are no program sections, obj->programs is left unallocated,
and find_prog_by_sec_insn()'s search lands on &obj->programs[0] == NULL,
and will cause null-pointer dereference in the following access to
prog->sec_idx.
Guard the search with obj->nr_programs similar to what's being done in
__bpf_program__iter() to prevent null-pointer access from happening.
Fixes: db2b8b0642 ("libbpf: Support CO-RE relocations for multi-prog sections")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012022353.7350-4-shung-hsi.yu@suse.com
ELF section data pointer returned by libelf may be NULL (if section has
SHT_NOBITS), so null check section data pointer before attempting to
copy license and kversion section.
Fixes: cb1e5e9619 ("bpf tools: Collect version and license from ELF sections")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012022353.7350-3-shung-hsi.yu@suse.com
This commit replace e_shnum with the elf_getshdrnum() helper to fix two
oss-fuzz-reported heap-buffer overflow in __bpf_object__open. Both
reports are incorrectly marked as fixed and while still being
reproducible in the latest libbpf.
# clusterfuzz-testcase-minimized-bpf-object-fuzzer-5747922482888704
libbpf: loading object 'fuzz-object' from buffer
libbpf: sec_cnt is 0
libbpf: elf: section(1) .data, size 0, link 538976288, flags 2020202020202020, type=2
libbpf: elf: section(2) .data, size 32, link 538976288, flags 202020202020ff20, type=1
=================================================================
==13==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000000c0 at pc 0x0000005a7b46 bp 0x7ffd12214af0 sp 0x7ffd12214ae8
WRITE of size 4 at 0x6020000000c0 thread T0
SCARINESS: 46 (4-byte-write-heap-buffer-overflow-far-from-bounds)
#0 0x5a7b45 in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3414:24
#1 0x5733c0 in bpf_object_open /src/libbpf/src/libbpf.c:7223:16
#2 0x5739fd in bpf_object__open_mem /src/libbpf/src/libbpf.c:7263:20
...
The issue lie in libbpf's direct use of e_shnum field in ELF header as
the section header count. Where as libelf implemented an extra logic
that, when e_shnum == 0 && e_shoff != 0, will use sh_size member of the
initial section header as the real section header count (part of ELF
spec to accommodate situation where section header counter is larger
than SHN_LORESERVE).
The above inconsistency lead to libbpf writing into a zero-entry calloc
area. So intead of using e_shnum directly, use the elf_getshdrnum()
helper provided by libelf to retrieve the section header counter into
sec_cnt.
Fixes: 0d6988e16a ("libbpf: Fix section counting logic")
Fixes: 25bbbd7a44 ("libbpf: Remove assumptions about uniqueness of .rodata/.data/.bss maps")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=40868
Link: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=40957
Link: https://lore.kernel.org/bpf/20221012022353.7350-2-shung-hsi.yu@suse.com
In the arm64 version of parse_usdt_arg(), when sscanf returns 2, reg_name
is allocated but not freed. Fix it.
Fixes: 0f8619929c ("libbpf: Usdt aarch64 arg parsing support")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-3-xukuohai@huaweicloud.com
ASAN reports an use-after-free in btf_dump_name_dups:
ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928
READ of size 2 at 0xffff927006db thread T0
#0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614)
#1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127
#2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143
#3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212
#4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525
#5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552
#6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567
#7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912
#8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798
#9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282
#10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236
#11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#15 0xaaaab5d65990 (test_progs+0x185990)
0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0)
freed by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032
#7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232
#8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#12 0xaaaab5d65990 (test_progs+0x185990)
previously allocated by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070
#7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102
#8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162
#9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#13 0xaaaab5d65990 (test_progs+0x185990)
The reason is that the key stored in hash table name_map is a string
address, and the string memory is allocated by realloc() function, when
the memory is resized by realloc() later, the old memory may be freed,
so the address stored in name_map references to a freed memory, causing
use-after-free.
Fix it by storing duplicated string address in name_map.
Fixes: 919d2b1dbb ("libbpf: Allow modification of BTF and add btf__add_str API")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-2-xukuohai@huaweicloud.com
Introduce bpf_link_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_link_get_fd_by_id(), and call bpf_link_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_link_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-6-roberto.sassu@huaweicloud.com
Introduce bpf_btf_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_btf_get_fd_by_id(), and call bpf_btf_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_btf_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-5-roberto.sassu@huaweicloud.com
Introduce bpf_prog_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_prog_get_fd_by_id(), and call bpf_prog_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_prog_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-4-roberto.sassu@huaweicloud.com
Define a new data structure called bpf_get_fd_by_id_opts, with the member
open_flags, to be used by callers of the _opts variants of
bpf_*_get_fd_by_id() to specify the permissions needed for the file
descriptor to be obtained.
Also, introduce bpf_map_get_fd_by_id_opts(), to let the caller pass a
bpf_get_fd_by_id_opts structure.
Finally, keep the existing bpf_map_get_fd_by_id(), and call
bpf_map_get_fd_by_id_opts() with NULL as opts argument, to request
read-write permissions (current behavior).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-3-roberto.sassu@huaweicloud.com
btf_dump_emit_struct_def attempts to print empty structures at a
single line, e.g. `struct empty {}`. However, it has to account for a
case when there are no regular but some padding fields in the struct.
In such case `vlen` would be zero, but size would be non-zero.
E.g. here is struct bpf_timer from vmlinux.h before this patch:
struct bpf_timer {
long: 64;
long: 64;};
And after this patch:
struct bpf_dynptr {
long: 64;
long: 64;
};
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221001104425.415768-1-eddyz87@gmail.com
I accidentally found that a change in commit 1045b03e07 ("netlink: fix
overrun in attribute iteration") was not synchronized to the function
`nla_ok` in tools/lib/bpf/nlattr.c, I think it is necessary to modify,
this patch will do it.
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220930090708.62394-1-liuxin350@huawei.com
Drop the requirement for system-wide kernel UAPI headers to provide full
struct btf_enum64 definition. This is an unexpected requirement that
slipped in libbpf 1.0 and put unnecessary pressure ([0]) on users to have
a bleeding-edge kernel UAPI header from unreleased Linux 6.0.
To achieve this, we forward declare struct btf_enum64. But that's not
enough as there is btf_enum64_value() helper that expects to know the
layout of struct btf_enum64. So we get a bit creative with
reinterpreting memory layout as array of __u32 and accesing lo32/hi32
fields as array elements. Alternative way would be to have a local
pointer variable for anonymous struct with exactly the same layout as
struct btf_enum64, but that gets us into C++ compiler errors complaining
about invalid type casts. So play it safe, if ugly.
[0] Closes: https://github.com/libbpf/libbpf/issues/562
Fixes: d90ec262b3 ("libbpf: Add enum64 support for btf_dump")
Reported-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/bpf/20220927042940.147185-1-andrii@kernel.org
When running rootless with special capabilities like:
FOWNER / DAC_OVERRIDE / DAC_READ_SEARCH
The "access" API will not make the proper check if there is really
access to a file or not.
>From the access man page:
"
The check is done using the calling process's real UID and GID, rather
than the effective IDs as is done when actually attempting an operation
(e.g., open(2)) on the file. Similarly, for the root user, the check
uses the set of permitted capabilities rather than the set of effective
capabilities; ***and for non-root users, the check uses an empty set of
capabilities.***
"
What that means is that for non-root user the access API will not do the
proper validation if the process really has permission to a file or not.
To resolve this this patch replaces all the access API calls with
faccessat with AT_EACCESS flag.
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220925070431.1313680-1-arilou@gmail.com
When attach_prog_fd field was removed in libbpf 1.0 and replaced with
`long: 0` placeholder, it actually shifted all the subsequent fields by
8 byte. This is due to `long: 0` promising to adjust next field's offset
to long-aligned offset. But in this case we were already long-aligned
as pin_root_path is a pointer. So `long: 0` had no effect, and thus
didn't feel the gap created by removed attach_prog_fd.
Non-zero bitfield should have been used instead. I validated using
pahole. Originally kconfig field was at offset 40. With `long: 0` it's
at offset 32, which is wrong. With this change it's back at offset 40.
While technically libbpf 1.0 is allowed to break backwards
compatibility and applications should have been recompiled against
libbpf 1.0 headers, but given how trivial it is to preserve memory
layout, let's fix this.
Reported-by: Grant Seltzer Richman <grantseltzer@gmail.com>
Fixes: 146bf811f5 ("libbpf: remove most other deprecated high-level APIs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220923230559.666608-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently, the default vmlinux files at '/boot/vmlinux-*',
'/lib/modules/*/vmlinux-*' etc. are parsed with 'btf__parse_elf()' to
extract BTF. It is possible that these files are actually raw BTF files
similar to /sys/kernel/btf/vmlinux. So parse these files with
'btf__parse' which tries both raw format and ELF format.
This might be useful in some scenarios where users put their custom BTF
into known locations and don't want to specify btf_custom_path option.
Signed-off-by: Tao Chen <chentao.kernel@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/3f59fb5a345d2e4f10e16fe9e35fbc4c03ecaa3e.1662999860.git.chentao.kernel@linux.alibaba.com
Commit 34586d29f8 ("libbpf: Add new BPF_PROG2 macro") added BPF_PROG2
macro for trampoline based programs with struct arguments. Andrii
made a few suggestions to improve code quality and description.
This patch implemented these suggestions including better internal
macro name, consistent usage pattern for __builtin_choose_expr(),
simpler macro definition for always-inline func arguments and
better macro description.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20220910025214.1536510-1-yhs@fb.com
Now that all of the logic is in place in the kernel to support user-space
produced ring buffers, we can add the user-space logic to libbpf. This
patch therefore adds the following public symbols to libbpf:
struct user_ring_buffer *
user_ring_buffer__new(int map_fd,
const struct user_ring_buffer_opts *opts);
void *user_ring_buffer__reserve(struct user_ring_buffer *rb, __u32 size);
void *user_ring_buffer__reserve_blocking(struct user_ring_buffer *rb,
__u32 size, int timeout_ms);
void user_ring_buffer__submit(struct user_ring_buffer *rb, void *sample);
void user_ring_buffer__discard(struct user_ring_buffer *rb,
void user_ring_buffer__free(struct user_ring_buffer *rb);
A user-space producer must first create a struct user_ring_buffer * object
with user_ring_buffer__new(), and can then reserve samples in the
ring buffer using one of the following two symbols:
void *user_ring_buffer__reserve(struct user_ring_buffer *rb, __u32 size);
void *user_ring_buffer__reserve_blocking(struct user_ring_buffer *rb,
__u32 size, int timeout_ms);
With user_ring_buffer__reserve(), a pointer to a 'size' region of the ring
buffer will be returned if sufficient space is available in the buffer.
user_ring_buffer__reserve_blocking() provides similar semantics, but will
block for up to 'timeout_ms' in epoll_wait if there is insufficient space
in the buffer. This function has the guarantee from the kernel that it will
receive at least one event-notification per invocation to
bpf_ringbuf_drain(), provided that at least one sample is drained, and the
BPF program did not pass the BPF_RB_NO_WAKEUP flag to bpf_ringbuf_drain().
Once a sample is reserved, it must either be committed to the ring buffer
with user_ring_buffer__submit(), or discarded with
user_ring_buffer__discard().
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-4-void@manifault.com
We want to support a ringbuf map type where samples are published from
user-space, to be consumed by BPF programs. BPF currently supports a
kernel -> user-space circular ring buffer via the BPF_MAP_TYPE_RINGBUF
map type. We'll need to define a new map type for user-space -> kernel,
as none of the helpers exported for BPF_MAP_TYPE_RINGBUF will apply
to a user-space producer ring buffer, and we'll want to add one or
more helper functions that would not apply for a kernel-producer
ring buffer.
This patch therefore adds a new BPF_MAP_TYPE_USER_RINGBUF map type
definition. The map type is useless in its current form, as there is no
way to access or use it for anything until we one or more BPF helpers. A
follow-on patch will therefore add a new helper function that allows BPF
programs to run callbacks on samples that are published to the ring
buffer.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220920000100.477320-2-void@manifault.com
We found that function btf_dump__dump_type_data can be called by the
user as an API, but in this function, the `opts` parameter may be used
as a null pointer.This causes `opts->indent_str` to trigger a NULL
pointer exception.
Fixes: 2ce8450ef5 ("libbpf: add bpf_object__open_{file, mem} w/ extensible opts")
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Weibin Kong <kongweibin2@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220917084809.30770-1-liuxin350@huawei.com
Fix SIGSEGV caused by libbpf trying to find attach type in vmlinux BTF
for freplace programs. It's wrong to search in vmlinux BTF and libbpf
doesn't even mark vmlinux BTF as required for freplace programs. So
trying to search anything in obj->vmlinux_btf might cause NULL
dereference if nothing else in BPF object requires vmlinux BTF.
Instead, error out if freplace (EXT) program doesn't specify
attach_prog_fd during at the load time.
Fixes: 91abb4a6d7 ("libbpf: Support attachment of BPF tracing programs to kernel modules")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220909193053.577111-3-andrii@kernel.org
This reverts commit 14e5ce7994 ("libbpf: Add GCC support for
bpf_tail_call_static"). Reason is that gcc invented their own BPF asm
which is not conform with LLVM one, and going forward this would be
more painful to maintain here and in other areas of the library. Thus
remove it; ask to gcc folks is to align with LLVM one to use exact
same syntax.
Fixes: 14e5ce7994 ("libbpf: Add GCC support for bpf_tail_call_static")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Jose E. Marchesi <jose.marchesi@oracle.com>
To support struct arguments in trampoline based programs,
existing BPF_PROG doesn't work any more since
the type size is needed to find whether a parameter
takes one or two registers. So this patch added a new
BPF_PROG2 macro to support such trampoline programs.
The idea is suggested by Andrii. For example, if the
to-be-traced function has signature like
typedef struct {
void *x;
int t;
} sockptr;
int blah(sockptr x, char y);
In the new BPF_PROG2 macro, the argument can be
represented as
__bpf_prog_call(
({ union {
struct { __u64 x, y; } ___z;
sockptr x;
} ___tmp = { .___z = { ctx[0], ctx[1] }};
___tmp.x;
}),
({ union {
struct { __u8 x; } ___z;
char y;
} ___tmp = { .___z = { ctx[2] }};
___tmp.y;
}));
In the above, the values stored on the stack are properly
assigned to the actual argument type value by using 'union'
magic. Note that the macro also works even if no arguments
are with struct types.
Note that new BPF_PROG2 works for both llvm16 and pre-llvm16
compilers where llvm16 supports bpf target passing value
with struct up to 16 byte size and pre-llvm16 will pass
by reference by storing values on the stack. With static functions
with struct argument as always inline, the compiler is able
to optimize and remove additional stack saving of struct values.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152707.2079473-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_tail_call_static function is currently not defined unless
using clang >= 8.
To support bpf_tail_call_static on GCC we can check if __clang__ is
not defined to enable bpf_tail_call_static.
We need to use GCC assembly syntax when the compiler does not define
__clang__ as LLVM inline assembly is not fully compatible with GCC.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220829210546.755377-1-james.hilliard1@gmail.com
This allows to have a better control over maps from the kernel when
preloading eBPF programs.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220824134055.1328882-8-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
bpf-next 2022-08-17
We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).
The main changes are:
1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
Kanzenbach and Jesper Dangaard Brouer.
2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.
3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.
4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.
5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
unsupported names on old kernels, from Hangbin Liu.
6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
from Hao Luo.
7) Relax libbpf's requirement for shared libs to be marked executable, from
Henqgi Chen.
8) Improve bpf_iter internals handling of error returns, from Hao Luo.
9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.
10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.
11) bpftool improvements to handle full BPF program names better, from Manu
Bretelle.
12) bpftool fixes around libcap use, from Quentin Monnet.
13) BPF map internals clean ups and improvements around memory allocations,
from Yafang Shao.
14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
iterator to work on cgroupv1, from Yosry Ahmed.
15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.
16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
selftests/bpf: Few fixes for selftests/bpf built in release mode
libbpf: Clean up deprecated and legacy aliases
libbpf: Streamline bpf_attr and perf_event_attr initialization
libbpf: Fix potential NULL dereference when parsing ELF
selftests/bpf: Tests libbpf autoattach APIs
libbpf: Allows disabling auto attach
selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
selftests/bpf: Update CI kconfig
selftests/bpf: Add connmark read test
selftests/bpf: Add existing connection bpf_*_ct_lookup() test
bpftool: Clear errno after libcap's checks
bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
bpftool: Fix a typo in a comment
libbpf: Add names for auxiliary maps
bpf: Use bpf_map_area_alloc consistently on bpf map creation
bpf: Make __GFP_NOWARN consistent in bpf map creation
bpf: Use bpf_map_area_free instread of kvfree
bpf: Remove unneeded memset in queue_stack_map creation
libbpf: preserve errno across pr_warn/pr_info/pr_debug
...
====================
Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove three missed deprecated APIs that were aliased to new APIs:
bpf_object__unload, bpf_prog_attach_xattr and btf__load.
Also move legacy API libbpf_find_kernel_btf (aliased to
btf__load_vmlinux_btf) into libbpf_legacy.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-4-andrii@kernel.org
Make sure that entire libbpf code base is initializing bpf_attr and
perf_event_attr with memset(0). Also for bpf_attr make sure we
clear and pass to kernel only relevant parts of bpf_attr. bpf_attr is
a huge union of independent sub-command attributes, so there is no need
to clear and pass entire union bpf_attr, which over time grows quite
a lot and for most commands this growth is completely irrelevant.
Few cases where we were relying on compiler initialization of BPF UAPI
structs (like bpf_prog_info, bpf_map_info, etc) with `= {};` were
switched to memset(0) pattern for future-proofing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-3-andrii@kernel.org
Similar with commit 10b62d6a38 ("libbpf: Add names for auxiliary maps"),
let's make bpf_prog_load() also ignore name if kernel doesn't support
program name.
To achieve this, we need to call sys_bpf_prog_load() directly in
probe_kern_prog_name() to avoid circular dependency. sys_bpf_prog_load()
also need to be exported in the libbpf_internal.h file.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220813000936.6464-1-liuhangbin@gmail.com
The bpftool self-created maps can appear in final map show output due to
deferred removal in kernel. These maps don't have a name, which would make
users confused about where it comes from.
With a libbpf_ prefix name, users could know who created these maps.
It also could make some tests (like test_offload.py, which skip base maps
without names as a workaround) filter them out.
Kernel adds bpf prog/map name support in the same merge
commit fadad670a8 ("Merge branch 'bpf-extend-info'"). So we can also use
kernel_supports(NULL, FEAT_PROG_NAME) to check if kernel supports map name.
As discussed [1], Let's make bpf_map_create accept non-null
name string, and silently ignore the name if kernel doesn't support.
[1] https://lore.kernel.org/bpf/CAEf4BzYL1TQwo1231s83pjTdFPk9XWWhfZC5=KzkU-VO0k=0Ug@mail.gmail.com/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220811034020.529685-1-liuhangbin@gmail.com
As suggested in [0], make sure that libbpf_print saves and restored
errno and as such guaranteed that no matter what actual print callback
user installs, macros like pr_warn/pr_info/pr_debug are completely
transparent as far as errno goes.
While libbpf code is pretty careful about not clobbering important errno
values accidentally with pr_warn(), it's a trivial change to make sure
that pr_warn can be used anywhere without a risk of clobbering errno.
No functional changes, just future proofing.
[0] https://github.com/libbpf/libbpf/pull/536
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/r/20220810183425.1998735-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier cannot perform sufficient validation of bpf_attr->test.ctx_in
pointer, therefore bpf programs should not be allowed to call BPF_PROG_RUN
command from within the program.
To fix this issue split bpf_sys_bpf() bpf helper into normal kern_sys_bpf()
kernel function that can only be used by the kernel light skeleton directly.
Reported-by: YiFei Zhu <zhuyifei@google.com>
Fixes: b1d18a7574 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, resolve_full_path() requires executable permission for both
programs and shared libraries. This causes failures on distos like Debian
since the shared libraries are not installed executable and Linux is not
requiring shared libraries to have executable permissions. Let's remove
executable permission check for shared libraries.
Reported-by: Goro Fuji <goro@fastly.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220806102021.3867130-1-hengqi.chen@gmail.com
Add explicit error message if BPF object file is still using legacy BPF
map definitions in SEC("maps"). Before this change, if BPF object file
is still using legacy map definition user will see a bit confusing:
libbpf: elf: skipping unrecognized data section(4) maps
libbpf: prog 'handler': bad map relo against 'server_map' in section 'maps'
Now libbpf will be explicit about rejecting "maps" ELF section:
libbpf: elf: legacy map definitions in 'maps' section are not supported by libbpf v1.0+
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220803214202.23750-1-andrii@kernel.org
GCC expects the always_inline attribute to only be set on inline
functions, as such we should make all functions with this attribute
use the __always_inline macro which makes the function inline and
sets the attribute.
Fixes errors like:
/home/buildroot/bpf-next/tools/testing/selftests/bpf/tools/include/bpf/bpf_tracing.h:439:1: error: ‘always_inline’ function might not be inlinable [-Werror=attributes]
439 | ____##name(unsigned long long *ctx, ##args)
| ^~~~
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220803151403.793024-1-james.hilliard1@gmail.com
The GNU assembler generates an empty .bss section. This is a well
established behavior in GAS that happens in all supported targets.
The LLVM assembler doesn't generate an empty .bss section.
bpftool chokes on the empty .bss section.
Additionally in bpf_object__elf_collect the sec_desc->data is not
initialized when a section is not recognized. In this case, this
happens with .comment.
So we must check that sec_desc->data is initialized before checking
if the size is 0.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220731232649.4668-1-james.hilliard1@gmail.com
Add an extensible variant of bpf_obj_get() capable of setting the
`file_flags` parameter.
This parameter is needed to enable unprivileged access to BPF maps.
Without a method like this, users must manually make the syscall.
Signed-off-by: Joe Burton <jevburton@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220729202727.3311806-1-jevburton.kernel@gmail.com
Commit 708ac5bea0 ("libbpf: add ksyscall/kretsyscall sections support
for syscall kprobes") added the arch_specific_syscall_pfx() function,
which returns a string representing the architecture in use. As it turns
out this function is currently not aware of Power PC, where NULL is
returned. That's being flagged by the libbpf CI system, which builds for
ppc64le and the compiler sees a NULL pointer being passed in to a %s
format string.
With this change we add representations for two more architectures, for
Power PC and Power PC 64, and also adjust the string format logic to
handle NULL pointers gracefully, in an attempt to prevent similar issues
with other architectures in the future.
Fixes: 708ac5bea0 ("libbpf: add ksyscall/kretsyscall sections support for syscall kprobes")
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220728222345.3125975-1-deso@posteo.net
Explicitly list known quirks. Mention that socket-related syscalls can be
invoked via socketcall().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220726134008.256968-2-iii@linux.ibm.com
The return from strcmp() is inverted so it wrongly returns true instead
of false and vice versa.
Fixes: a1c9d61b19 ("libbpf: Improve library identification for uprobe binary path resolution")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/YtZ+/dAA195d99ak@kili
The code here is supposed to take a signed int and store it in a signed
long long. Unfortunately, the way that the type promotion works with
this conditional statement is that it takes a signed int, type promotes
it to a __u32, and then stores that as a signed long long. The result is
never negative.
This is from static analysis, but I made a little test program just to
test it before I sent the patch:
#include <stdio.h>
int main(void)
{
unsigned long long src = -1ULL;
signed long long dst1, dst2;
int is_signed = 1;
dst1 = is_signed ? *(int *)&src : *(unsigned int *)0;
dst2 = is_signed ? (signed long long)*(int *)&src : *(unsigned int *)0;
printf("%lld\n", dst1);
printf("%lld\n", dst2);
return 0;
}
Fixes: d90ec262b3 ("libbpf: Add enum64 support for btf_dump")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/YtZ+LpgPADm7BeEd@kili
The snprintf() function returns the number of bytes it *would* have
copied if there were enough space. So it can return > the
sizeof(gen->attach_target).
Fixes: 6723474373 ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/YtZ+oAySqIhFl6/J@kili
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make libbpf adjust RINGBUF map size (rounding it up to closest power-of-2
of page_size) more eagerly: during open phase when initializing the map
and on explicit calls to bpf_map__set_max_entries().
Such approach allows user to check actual size of BPF ringbuf even
before it's created in the kernel, but also it prevents various edge
case scenarios where BPF ringbuf size can get out of sync with what it
would be in kernel. One of them (reported in [0]) is during an attempt
to pin/reuse BPF ringbuf.
Move adjust_ringbuf_sz() helper closer to its first actual use. The
implementation of the helper is unchanged.
Also make detection of whether bpf_object is already loaded more robust
by checking obj->loaded explicitly, given that map->fd can be < 0 even
if bpf_object is already loaded due to ability to disable map creation
with bpf_map__set_autocreate(map, false).
[0] Closes: https://github.com/libbpf/libbpf/pull/530
Fixes: 0087a681fa ("libbpf: Automatically fix up BPF_MAP_TYPE_RINGBUF size, if necessary")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220715230952.2219271-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add SEC("ksyscall")/SEC("ksyscall/<syscall_name>") and corresponding
kretsyscall variants (for return kprobes) to allow users to kprobe
syscall functions in kernel. These special sections allow to ignore
complexities and differences between kernel versions and host
architectures when it comes to syscall wrapper and corresponding
__<arch>_sys_<syscall> vs __se_sys_<syscall> differences, depending on
whether host kernel has CONFIG_ARCH_HAS_SYSCALL_WRAPPER (though libbpf
itself doesn't rely on /proc/config.gz for detecting this, see
BPF_KSYSCALL patch for how it's done internally).
Combined with the use of BPF_KSYSCALL() macro, this allows to just
specify intended syscall name and expected input arguments and leave
dealing with all the variations to libbpf.
In addition to SEC("ksyscall+") and SEC("kretsyscall+") add
bpf_program__attach_ksyscall() API which allows to specify syscall name
at runtime and provide associated BPF cookie value.
At the moment SEC("ksyscall") and bpf_program__attach_ksyscall() do not
handle all the calling convention quirks for mmap(), clone() and compat
syscalls. It also only attaches to "native" syscall interfaces. If host
system supports compat syscalls or defines 32-bit syscalls in 64-bit
kernel, such syscall interfaces won't be attached to by libbpf.
These limitations may or may not change in the future. Therefore it is
recommended to use SEC("kprobe") for these syscalls or if working with
compat and 32-bit interfaces is required.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220714070755.3235561-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Improve BPF_KPROBE_SYSCALL (and rename it to shorter BPF_KSYSCALL to
match libbpf's SEC("ksyscall") section name, added in next patch) to use
__kconfig variable to determine how to properly fetch syscall arguments.
Instead of relying on hard-coded knowledge of whether kernel's
architecture uses syscall wrapper or not (which only reflects the latest
kernel versions, but is not necessarily true for older kernels and won't
necessarily hold for later kernel versions on some particular host
architecture), determine this at runtime by attempting to create
perf_event (with fallback to kprobe event creation through tracefs on
legacy kernels, just like kprobe attachment code is doing) for kernel
function that would correspond to bpf() syscall on a system that has
CONFIG_ARCH_HAS_SYSCALL_WRAPPER set (e.g., for x86-64 it would try
'__x64_sys_bpf').
If host kernel uses syscall wrapper, syscall kernel function's first
argument is a pointer to struct pt_regs that then contains syscall
arguments. In such case we need to use bpf_probe_read_kernel() to fetch
actual arguments (which we do through BPF_CORE_READ() macro) from inner
pt_regs.
But if the kernel doesn't use syscall wrapper approach, input
arguments can be read from struct pt_regs directly with no probe reading.
All this feature detection is done without requiring /proc/config.gz
existence and parsing, and BPF-side helper code uses newly added
LINUX_HAS_SYSCALL_WRAPPER virtual __kconfig extern to keep in sync with
user-side feature detection of libbpf.
BPF_KSYSCALL() macro can be used both with SEC("kprobe") programs that
define syscall function explicitly (e.g., SEC("kprobe/__x64_sys_bpf"))
and SEC("ksyscall") program added in the next patch (which are the same
kprobe program with added benefit of libbpf determining correct kernel
function name automatically).
Kretprobe and kretsyscall (added in next patch) programs don't need
BPF_KSYSCALL as they don't provide access to input arguments. Normal
BPF_KRETPROBE is completely sufficient and is recommended.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220714070755.3235561-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Libbpf supports single virtual __kconfig extern currently: LINUX_KERNEL_VERSION.
LINUX_KERNEL_VERSION isn't coming from /proc/kconfig.gz and is intead
customly filled out by libbpf.
This patch generalizes this approach to support more such virtual
__kconfig externs. One such extern added in this patch is
LINUX_HAS_BPF_COOKIE which is used for BPF-side USDT supporting code in
usdt.bpf.h instead of using CO-RE-based enum detection approach for
detecting bpf_get_attach_cookie() BPF helper. This allows to remove
otherwise not needed CO-RE dependency and keeps user-space and BPF-side
parts of libbpf's USDT support strictly in sync in terms of their
feature detection.
We'll use similar approach for syscall wrapper detection for
BPF_KSYSCALL() BPF-side macro in follow up patch.
Generally, currently libbpf reserves CONFIG_ prefix for Kconfig values
and LINUX_ for virtual libbpf-backed externs. In the future we might
extend the set of prefixes that are supported. This can be done without
any breaking changes, as currently any __kconfig extern with
unrecognized name is rejected.
For LINUX_xxx externs we support the normal "weak rule": if libbpf
doesn't recognize given LINUX_xxx extern but such extern is marked as
__weak, it is not rejected and defaults to zero. This follows
CONFIG_xxx handling logic and will allow BPF applications to
opportunistically use newer libbpf virtual externs without breaking on
older libbpf versions unnecessarily.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220714070755.3235561-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for writing a custom event reader, by exposing the ring
buffer.
With the new API perf_buffer__buffer() you will get access to the
raw mmaped()'ed per-cpu underlying memory of the ring buffer.
This region contains both the perf buffer data and header
(struct perf_event_mmap_page), which manages the ring buffer
state (head/tail positions, when accessing the head/tail position
it's important to take into consideration SMP).
With this type of low level access one can implement different types of
consumers here are few simple examples where this API helps with:
1. perf_event_read_simple is allocating using malloc, perhaps you want
to handle the wrap-around in some other way.
2. Since perf buf is per-cpu then the order of the events is not
guarnteed, for example:
Given 3 events where each event has a timestamp t0 < t1 < t2,
and the events are spread on more than 1 CPU, then we can end
up with the following state in the ring buf:
CPU[0] => [t0, t2]
CPU[1] => [t1]
When you consume the events from CPU[0], you could know there is
a t1 missing, (assuming there are no drops, and your event data
contains a sequential index).
So now one can simply do the following, for CPU[0], you can store
the address of t0 and t2 in an array (without moving the tail, so
there data is not perished) then move on the CPU[1] and set the
address of t1 in the same array.
So you end up with something like:
void **arr[] = [&t0, &t1, &t2], now you can consume it orderely
and move the tails as you process in order.
3. Assuming there are multiple CPUs and we want to start draining the
messages from them, then we can "pick" with which one to start with
according to the remaining free space in the ring buffer.
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220715181122.149224-1-arilou@gmail.com
BPF map name is limited to BPF_OBJ_NAME_LEN.
A map name is defined as being longer than BPF_OBJ_NAME_LEN,
it will be truncated to BPF_OBJ_NAME_LEN when a userspace program
calls libbpf to create the map. A pinned map also generates a path
in the /sys. If the previous program wanted to reuse the map，
it can not get bpf_map by name, because the name of the map is only
partially the same as the name which get from pinned path.
The syscall information below show that map name "process_pinned_map"
is truncated to "process_pinned_".
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/process_pinned_map",
bpf_fd=0, file_flags=0}, 144) = -1 ENOENT (No such file or directory)
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4,
value_size=4,max_entries=1024, map_flags=0, inner_map_fd=0,
map_name="process_pinned_",map_ifindex=0, btf_fd=3, btf_key_type_id=6,
btf_value_type_id=10,btf_vmlinux_value_type_id=0}, 72) = 4
This patch check that if the name of pinned map are the same as the
actual name for the first (BPF_OBJ_NAME_LEN - 1),
bpf map still uses the name which is included in bpf object.
Fixes: 26736eb9a4 ("tools: libbpf: allow map reuse")
Signed-off-by: Anquan Wu <leiqi96@hotmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/OSZP286MB1725CEA1C95C5CB8E7CCC53FB8869@OSZP286MB1725.JPNP286.PROD.OUTLOOK.COM
binary_path is a required non-null parameter for bpf_program__attach_usdt
and bpf_program__attach_uprobe_opts. Check it against NULL to prevent
coredump on strchr.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220712025745.2703995-1-hengqi.chen@gmail.com
This change addresses a comment made earlier [0] about a missing return
of an error when __bpf_core_types_match is invoked from
bpf_core_composites_match, which could have let to us erroneously
ignoring errors.
Regarding the typedef name check pointed out in the same context, it is
not actually an issue, because callers of the function perform a name
check for the root type anyway. To make that more obvious, let's add
comments to the function (similar to what we have for
bpf_core_types_are_compat, which is called in pretty much the same
context).
[0]: https://lore.kernel.org/bpf/165708121449.4919.13204634393477172905.git-patchwork-notify@kernel.org/T/#m55141e8f8cfd2e8d97e65328fa04852870d01af6
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220707211931.3415440-1-deso@posteo.net
According to the RISC-V calling convention register usage here [0], a0
is used as return value register, so rename it to make it consistent
with the spec.
[0] section 18.2, table 18.2
https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf
Fixes: 589fed479b ("riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h")
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Amjad OULED-AMEUR <ouledameur.amjad@gmail.com>
Link: https://lore.kernel.org/bpf/20220706140204.47926-1-dlan@gentoo.org
Coverity detected that usdt_rel_ip is unconditionally overwritten
anyways, so there is no need to unnecessarily initialize it with unused
value. Clean this up.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220705224818.4026623-4-andrii@kernel.org
A potential scenario, when an error is returned after
add_uprobe_event_legacy() in perf_event_uprobe_open_legacy(), or
bpf_program__attach_perf_event_opts() in
bpf_program__attach_uprobe_opts() returns an error, the uprobe_event
that was previously created is not cleaned.
So, with this patch, when an error is returned, fix this by adding
remove_uprobe_event_legacy()
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220629151848.65587-4-nashuiliang@gmail.com
Before the 0bc11ed5ab commit ("kprobes: Allow kprobes coexist with
livepatch"), in a scenario where livepatch and kprobe coexist on the
same function entry, the creation of kprobe_event using
add_kprobe_event_legacy() will be successful, at the same time as a
trace event (e.g. /debugfs/tracing/events/kprobe/XXX) will exist, but
perf_event_open() will return an error because both livepatch and kprobe
use FTRACE_OPS_FL_IPMODIFY. As follows:
1) add a livepatch
$ insmod livepatch-XXX.ko
2) add a kprobe using tracefs API (i.e. add_kprobe_event_legacy)
$ echo 'p:mykprobe XXX' > /sys/kernel/debug/tracing/kprobe_events
3) enable this kprobe (i.e. sys_perf_event_open)
This will return an error, -EBUSY.
On Andrii Nakryiko's comment, few error paths in
bpf_program__attach_kprobe_opts() that should need to call
remove_kprobe_event_legacy().
With this patch, whenever an error is returned after
add_kprobe_event_legacy() or bpf_program__attach_perf_event_opts(), this
ensures that the created kprobe_event is cleaned.
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Jingren Zhou <zhoujingren@didiglobal.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220629151848.65587-2-nashuiliang@gmail.com
This patch finalizes support for the proposed type match relation in libbpf by
adding bpf_core_type_matches() macro which emits TYPE_MATCH relocation.
Clang support for this relocation was added in [0].
[0] https://reviews.llvm.org/D126838
Signed-off-by: Daniel Müller <deso@posteo.net>¬
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>¬
Link: https://lore.kernel.org/bpf/20220628160127.607834-7-deso@posteo.net¬
This patch adds support for the proposed type match relation to
relo_core where it is shared between userspace and kernel. It plumbs
through both kernel-side and libbpf-side support.
The matching relation is defined as follows (copy from source):
- modifiers and typedefs are stripped (and, hence, effectively ignored)
- generally speaking types need to be of same kind (struct vs. struct, union
vs. union, etc.)
- exceptions are struct/union behind a pointer which could also match a
forward declaration of a struct or union, respectively, and enum vs.
enum64 (see below)
Then, depending on type:
- integers:
- match if size and signedness match
- arrays & pointers:
- target types are recursively matched
- structs & unions:
- local members need to exist in target with the same name
- for each member we recursively check match unless it is already behind a
pointer, in which case we only check matching names and compatible kind
- enums:
- local variants have to have a match in target by symbolic name (but not
numeric value)
- size has to match (but enum may match enum64 and vice versa)
- function pointers:
- number and position of arguments in local type has to match target
- for each argument and the return value we recursively check match
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-5-deso@posteo.net
In order to provide type match support we require a new type of
relocation which, in turn, requires toolchain support. Recent LLVM/Clang
versions support a new value for the last argument to the
__builtin_preserve_type_info builtin, for example.
With this change we introduce the necessary constants into relevant
header files, mirroring what the compiler may support.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-2-deso@posteo.net
Implement bpf_prog_query_opts as a more expendable version of
bpf_prog_query. Expose new prog_attach_flags and attach_btf_func_id as
well:
* prog_attach_flags is a per-program attach_type; relevant only for
lsm cgroup program which might have different attach_flags
per attach_btf_id
* attach_btf_func_id is a new field expose for prog_query which
specifies real btf function id for lsm cgroup attachments
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-10-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
lsm_cgroup/ is the prefix for BPF_LSM_CGROUP.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-9-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Seems like we missed to add 2 APIs to libbpf.map and another API was
misspelled. Fix it in libbpf.map.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-16-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove support for legacy features and behaviors that previously had to
be disabled by calling libbpf_set_strict_mode():
- legacy BPF map definitions are not supported now;
- RLIMIT_MEMLOCK auto-setting, if necessary, is always on (but see
libbpf_set_memlock_rlim());
- program name is used for program pinning (instead of section name);
- cleaned up error returning logic;
- entry BPF programs should have SEC() always.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-15-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Clean up internals that had to deal with the possibility of
multi-instance bpf_programs. Libbpf 1.0 doesn't support this, so all
this is not necessary now and can be simplified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-12-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Keep the LIBBPF_DEPRECATED_SINCE macro "framework" for future
deprecations, but clean up 0.x related helper macros.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove all the public APIs that are related to creating multi-instance
bpf_programs through custom preprocessing callback and generally working
with them.
Also remove all the bpf_{object,map,program}__[set_]priv() APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove a bunch of high-level bpf_object/bpf_map/bpf_program related
APIs. All the APIs related to private per-object/map/prog state,
program preprocessing callback, and generally everything multi-instance
related is removed in a separate patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Drop low-level APIs as well as high-level (and very confusingly named)
BPF object loading bpf_prog_load_xattr() and bpf_prog_load_deprecated()
APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove deprecated xsk APIs from libbpf. But given we have selftests
relying on this, move those files (with minimal adjustments to make them
compilable) under selftests/bpf.
We also remove all the removed APIs from libbpf.map, while overall
keeping version inheritance chain, as most APIs are backwards
compatible so there is no need to reassign them as LIBBPF_1.0.0 versions.
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220627211527.2245459-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF type compatibility checks (bpf_core_types_are_compat()) are
currently duplicated between kernel and user space. That's a historical
artifact more than intentional doing and can lead to subtle bugs where
one implementation is adjusted but another is forgotten.
That happened with the enum64 work, for example, where the libbpf side
was changed (commit 23b2a3a8f6 ("libbpf: Add enum64 relocation
support")) to use the btf_kind_core_compat() helper function but the
kernel side was not (commit 6089fb325c ("bpf: Add btf enum64
support")).
This patch addresses both the duplication issue, by merging both
implementations and moving them into relo_core.c, and fixes the alluded
to kind check (by giving preference to libbpf's already adjusted logic).
For discussion of the topic, please refer to:
https://lore.kernel.org/bpf/CAADnVQKbWR7oarBdewgOBZUPzryhRYvEbkhyPJQHHuxq=0K1gw@mail.gmail.com/T/#mcc99f4a33ad9a322afaf1b9276fb1f0b7add9665
Changelog:
v1 -> v2:
- limited libbpf recursion limit to 32
- changed name to __bpf_core_types_are_compat
- included warning previously present in libbpf version
- merged kernel and user space changes into a single patch
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220623182934.2582827-1-deso@posteo.net
Perform the same virtual address to file offset translation that libbpf
is doing for executable ELF binaries also for shared libraries.
Currently libbpf is making a simplifying and sometimes wrong assumption
that for shared libraries relative virtual addresses inside ELF are
always equal to file offsets.
Unfortunately, this is not always the case with LLVM's lld linker, which
now by default generates quite more complicated ELF segments layout.
E.g., for liburandom_read.so from selftests/bpf, here's an excerpt from
readelf output listing ELF segments (a.k.a. program headers):
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
PHDR 0x000040 0x0000000000000040 0x0000000000000040 0x0001f8 0x0001f8 R 0x8
LOAD 0x000000 0x0000000000000000 0x0000000000000000 0x0005e4 0x0005e4 R 0x1000
LOAD 0x0005f0 0x00000000000015f0 0x00000000000015f0 0x000160 0x000160 R E 0x1000
LOAD 0x000750 0x0000000000002750 0x0000000000002750 0x000210 0x000210 RW 0x1000
LOAD 0x000960 0x0000000000003960 0x0000000000003960 0x000028 0x000029 RW 0x1000
Compare that to what is generated by GNU ld (or LLVM lld's with extra
-znoseparate-code argument which disables this cleverness in the name of
file size reduction):
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000000 0x0000000000000000 0x0000000000000000 0x000550 0x000550 R 0x1000
LOAD 0x001000 0x0000000000001000 0x0000000000001000 0x000131 0x000131 R E 0x1000
LOAD 0x002000 0x0000000000002000 0x0000000000002000 0x0000ac 0x0000ac R 0x1000
LOAD 0x002dc0 0x0000000000003dc0 0x0000000000003dc0 0x000262 0x000268 RW 0x1000
You can see from the first example above that for executable (Flg == "R E")
PT_LOAD segment (LOAD #2), Offset doesn't match VirtAddr columns.
And it does in the second case (GNU ld output).
This is important because all the addresses, including USDT specs,
operate in a virtual address space, while kernel is expecting file
offsets when performing uprobe attach. So such mismatches have to be
properly taken care of and compensated by libbpf, which is what this
patch is fixing.
Also patch clarifies few function and variable names, as well as updates
comments to reflect this important distinction (virtaddr vs file offset)
and to ephasize that shared libraries are not all that different from
executables in this regard.
This patch also changes selftests/bpf Makefile to force urand_read and
liburand_read.so to be built with Clang and LLVM's lld (and explicitly
request this ELF file size optimization through -znoseparate-code linker
parameter) to validate libbpf logic and ensure regressions don't happen
in the future. I've bundled these selftests changes together with libbpf
changes to keep the above description tied with both libbpf and
selftests changes.
Fixes: 74cc6311ce ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220616055543.3285835-1-andrii@kernel.org
Andrii reported a bug with the following information:
2859 if (enum64_placeholder_id == 0) {
2860 enum64_placeholder_id = btf__add_int(btf, "enum64_placeholder", 1, 0);
>>> CID 394804: Control flow issues (NO_EFFECT)
>>> This less-than-zero comparison of an unsigned value is never true. "enum64_placeholder_id < 0U".
2861 if (enum64_placeholder_id < 0)
2862 return enum64_placeholder_id;
2863 ...
Here enum64_placeholder_id declared as '__u32' so enum64_placeholder_id < 0
is always false. Declare enum64_placeholder_id as 'int' in order to capture
the potential error properly.
Fixes: f2a625889b ("libbpf: Add enum64 sanitization")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220613054314.1251905-1-yhs@fb.com
Fix libbpf's bpf_program__attach_uprobe() logic of determining
function's *file offset* (which is what kernel is actually expecting)
when attaching uprobe/uretprobe by function name. Previously calculation
was determining virtual address offset relative to base load address,
which (offset) is not always the same as file offset (though very
frequently it is which is why this went unnoticed for a while).
Fixes: 433966e3ae ("libbpf: Support function name-based attach uprobes")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Riham Selim <rihams@fb.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220606220143.3796908-1-andrii@kernel.org
The enum64 relocation support is added. The bpf local type
could be either enum or enum64 and the remote type could be
either enum or enum64 too. The all combinations of local enum/enum64
and remote enum/enum64 are supported.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062647.3721719-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add BTF_KIND_ENUM64 support for bpf linking, which is
very similar to BTF_KIND_ENUM.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062642.3721494-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When old kernel does not support enum64 but user space btf
contains non-zero enum kflag or enum64, libbpf needs to
do proper sanitization so modified btf can be accepted
by the kernel.
Sanitization for enum kflag can be achieved by clearing
the kflag bit. For enum64, the type is replaced with an
union of integer member types and the integer member size
must be smaller than enum64 size. If such an integer
type cannot be found, a new type is created and used
for union members.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062636.3721375-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add enum64 btf dumping support. For long long and unsigned long long
dump, suffixes 'LL' and 'ULL' are added to avoid compilation errors
in some cases.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062631.3720526-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add enum64 deduplication support. BTF_KIND_ENUM64 handling
is very similar to BTF_KIND_ENUM.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062626.3720166-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add enum64 parsing support and two new enum64 public APIs:
btf__add_enum64
btf__add_enum64_value
Also add support of signedness for BTF_KIND_ENUM. The
BTF_KIND_ENUM API signatures are not changed. The signedness
will be changed from unsigned to signed if btf__add_enum_value()
finds any negative values.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062621.3719391-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor btf__add_enum() function to create a separate
function btf_add_enum_common() so later the common function
can be used to add enum64 btf type. There is no functionality
change for this patch.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062615.3718063-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the 64bit relocation value in the instruction
is computed as follows:
__u64 imm = insn[0].imm + ((__u64)insn[1].imm << 32)
Suppose insn[0].imm = -1 (0xffffffff) and insn[1].imm = 1.
With the above computation, insn[0].imm will first sign-extend
to 64bit -1 (0xffffffffFFFFFFFF) and then add 0x1FFFFFFFF,
producing incorrect value 0xFFFFFFFF. The correct value
should be 0x1FFFFFFFF.
Changing insn[0].imm to __u32 first will prevent 64bit sign
extension and fix the issue. Merging high and low 32bit values
also changed from '+' to '|' to be consistent with other
similar occurences in kernel and libbpf.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062610.3717378-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the libbpf limits the relocation value to be 32bit
since all current relocations have such a limit. But with
BTF_KIND_ENUM64 support, the enum value could be 64bit.
So let us permit 64bit relocation value in libbpf.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220607062605.3716779-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the correct definition from linker.c into libbpf_internal.h.
Fixes: 0087a681fa ("libbpf: Automatically fix up BPF_MAP_TYPE_RINGBUF size, if necessary")
Reported-by: Yuze Chi <chiyuze@google.com>
Signed-off-by: Yuze Chi <chiyuze@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220603055156.2830463-1-irogers@google.com
This change fixes a couple of typos that were encountered while studying
the source code.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220601154025.3295035-1-deso@posteo.net
One strategy employed by libbpf to guess the pointer size is by finding
the size of "unsigned long" type. This is achieved by looking for a type
of with the expected name and checking its size.
Unfortunately, the C syntax is friendlier to humans than to computers
as there is some variety in how such a type can be named. Specifically,
gcc and clang do not use the same names for integer types in debug info:
- clang uses "unsigned long"
- gcc uses "long unsigned int"
Lookup all the names for such a type so that libbpf can hope to find the
information it wants.
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220524094447.332186-1-douglas.raillard@arm.com
This change introduces a new function, libbpf_bpf_link_type_str, to the
public libbpf API. The function allows users to get a string
representation for a bpf_link_type enum variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-11-deso@posteo.net
This change introduces a new function, libbpf_bpf_attach_type_str, to
the public libbpf API. The function allows users to get a string
representation for a bpf_attach_type variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-8-deso@posteo.net
This change introduces a new function, libbpf_bpf_map_type_str, to the
public libbpf API. The function allows users to get a string
representation for a bpf_map_type enum variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-5-deso@posteo.net
This change introduces a new function, libbpf_bpf_prog_type_str, to the
public libbpf API. The function allows users to get a string
representation for a bpf_prog_type variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-2-deso@posteo.net
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/bpf/20220521111145.81697-71-Julia.Lawall@inria.fr
To test API removal, get rid of bpf_create_map*() APIs. Perf defines
__weak implementation of bpf_map_create() that redirects to old
bpf_create_map() and that seems to compile and run fine.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220518185915.3529475-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Start libbpf 1.0 development cycle by adding LIBBPF_1.0.0 section to
libbpf.map file and marking all current symbols as local. As we remove
all the deprecated APIs we'll populate global list before the final 1.0
release.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220518185915.3529475-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the same negative ABS filter that we use in VERSIONED_SYM_COUNT to
filter out ABS symbols like LIBBPF_0.8.0.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220518185915.3529475-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add high-level API wrappers for most common and typical BPF map
operations that works directly on instances of struct bpf_map * (so
you don't have to call bpf_map__fd()) and validate key/value size
expectations.
These helpers require users to specify key (and value, where
appropriate) sizes when performing lookup/update/delete/etc. This forces
user to actually think and validate (for themselves) those. This is
a good thing as user is expected by kernel to implicitly provide correct
key/value buffer sizes and kernel will just read/write necessary amount
of data. If it so happens that user doesn't set up buffers correctly
(which bit people for per-CPU maps especially) kernel either randomly
overwrites stack data or return -EFAULT, depending on user's luck and
circumstances. These high-level APIs are meant to prevent such
unpleasant and hard to debug bugs.
This patch also adds bpf_map_delete_elem_flags() low-level API and
requires passing flags to bpf_map__delete_elem() API for consistency
across all similar APIs, even though currently kernel doesn't expect
any extra flags for BPF_MAP_DELETE_ELEM operation.
List of map operations that get these high-level APIs:
- bpf_map_lookup_elem;
- bpf_map_update_elem;
- bpf_map_delete_elem;
- bpf_map_lookup_and_delete_elem;
- bpf_map_get_next_key.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220512220713.2617964-1-andrii@kernel.org
Adding bpf_program__set_insns that allows to set new instructions
for a BPF program.
This is a very advanced libbpf API and users need to know what
they are doing. This should be used from prog_prepare_load_fn
callback only.
We can have changed instructions after calling prog_prepare_load_fn
callback, reloading them.
One of the users of this new API will be perf's internal BPF prologue
generation.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510074659.2557731-2-jolsa@kernel.org
Add a cookie field to the attributes of bpf_link_create().
Add bpf_program__attach_trace_opts() to attach a cookie to a link.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510205923.3206889-5-kuifeng@fb.com
Kernel imposes a pretty particular restriction on ringbuf map size. It
has to be a power-of-2 multiple of page size. While generally this isn't
hard for user to satisfy, sometimes it's impossible to do this
declaratively in BPF source code or just plain inconvenient to do at
runtime.
One such example might be BPF libraries that are supposed to work on
different architectures, which might not agree on what the common page
size is.
Let libbpf find the right size for user instead, if it turns out to not
satisfy kernel requirements. If user didn't set size at all, that's most
probably a mistake so don't upsize such zero size to one full page,
though. Also we need to be careful about not overflowing __u32
max_entries.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-9-andrii@kernel.org
Add barrier() and barrier_var() macros into bpf_helpers.h to be used by
end users. While a bit advanced and specialized instruments, they are
sometimes indispensable. Instead of requiring each user to figure out
exact asm volatile incantations for themselves, provide them from
bpf_helpers.h.
Also remove conflicting definitions from selftests. Some tests rely on
barrier_var() definition being nothing, those will still work as libbpf
does the #ifndef/#endif guarding for barrier() and barrier_var(),
allowing users to redefine them, if necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-8-andrii@kernel.org
Add bpf_core_field_offset() helper to complete field-based CO-RE
helpers. This helper can be useful for feature-detection and for some
more advanced cases of field reading (e.g., reading flexible array members).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-6-andrii@kernel.org
Allow to specify field reference in two ways:
- if user has variable of necessary type, they can use variable-based
reference (my_var.my_field or my_var_ptr->my_field). This was the
only supported syntax up till now.
- now, bpf_core_field_exists() and bpf_core_field_size() support also
specifying field in a fashion similar to offsetof() macro, by
specifying type of the containing struct/union separately and field
name separately: bpf_core_field_exists(struct my_type, my_field).
This forms is quite often more convenient in practice and it matches
type-based CO-RE helpers that support specifying type by its name
without requiring any variables.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-4-andrii@kernel.org
It will be annoying and surprising for users of __kptr and __kptr_ref if
libbpf silently ignores them just because Clang used for compilation
didn't support btf_type_tag(). It's much better to get clear compiler
error than debug BPF verifier failures later on.
Fixes: ef89654f2b ("libbpf: Add kptr type tag macros to bpf_helpers.h")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-3-andrii@kernel.org
Add bpf_map__set_autocreate() API that allows user to opt-out from
libbpf automatically creating BPF map during BPF object load.
This is a useful feature when building CO-RE-enabled BPF application
that takes advantage of some new-ish BPF map type (e.g., socket-local
storage) if kernel supports it, but otherwise uses some alternative way
(e.g., extra HASH map). In such case, being able to disable the creation
of a map that kernel doesn't support allows to successfully create and
load BPF object file with all its other maps and programs.
It's still up to user to make sure that no "live" code in any of their BPF
programs are referencing such map instance, which can be achieved by
guarding such code with CO-RE relocation check or by using .rodata
global variables.
If user fails to properly guard such code to turn it into "dead code",
libbpf will helpfully post-process BPF verifier log and will provide
more meaningful error and map name that needs to be guarded properly. As
such, instead of:
; value = bpf_map_lookup_elem(&missing_map, &zero);
4: (85) call unknown#2001000000
invalid func unknown#2001000000
... user will see:
; value = bpf_map_lookup_elem(&missing_map, &zero);
4: <invalid BPF map reference>
BPF map 'missing_map' is referenced but wasn't created
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-4-andrii@kernel.org
Reuse libbpf_mem_ensure() when adding a new map to the list of maps
inside bpf_object. It takes care of proper resizing and reallocating of
map array and zeroing out newly allocated memory.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-3-andrii@kernel.org
Detect CO-RE spec truncation and append "..." to make user aware that
there was supposed to be more of the spec there.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-2-andrii@kernel.org
Similar to previous patch, support target-less definitions like
SEC("fentry"), SEC("freplace"), etc. For such BTF-backed program types
it is expected that user will specify BTF target programmatically at
runtime using bpf_program__set_attach_target() *before* load phase. If
not, libbpf will report this as an error.
Aslo use SEC_ATTACH_BTF flag instead of explicitly listing a set of
types that are expected to require attach_btf_id. This was an accidental
omission during custom SEC() support refactoring.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220428185349.3799599-3-andrii@kernel.org
In a lot of cases the target of kprobe/kretprobe, tracepoint, raw
tracepoint, etc BPF program might not be known at the compilation time
and will be discovered at runtime. This was always a supported case by
libbpf, with APIs like bpf_program__attach_{kprobe,tracepoint,etc}()
accepting full target definition, regardless of what was defined in
SEC() definition in BPF source code.
Unfortunately, up till now libbpf still enforced users to specify at
least something for the fake target, e.g., SEC("kprobe/whatever"), which
is cumbersome and somewhat misleading.
This patch allows target-less SEC() definitions for basic tracing BPF
program types:
- kprobe/kretprobe;
- multi-kprobe/multi-kretprobe;
- tracepoints;
- raw tracepoints.
Such target-less SEC() definitions are meant to specify declaratively
proper BPF program type only. Attachment of them will have to be handled
programmatically using correct APIs. As such, skeleton's auto-attachment
of such BPF programs is skipped and generic bpf_program__attach() will
fail, if attempted, due to the lack of enough target information.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220428185349.3799599-2-andrii@kernel.org
Teach libbpf to post-process BPF verifier log on BPF program load
failure and detect known error patterns to provide user with more
context.
Currently there is one such common situation: an "unguarded" failed BPF
CO-RE relocation. While failing CO-RE relocation is expected, it is
expected to be property guarded in BPF code such that BPF verifier
always eliminates BPF instructions corresponding to such failed CO-RE
relos as dead code. In cases when user failed to take such precautions,
BPF verifier provides the best log it can:
123: (85) call unknown#195896080
invalid func unknown#195896080
Such incomprehensible log error is due to libbpf "poisoning" BPF
instruction that corresponds to failed CO-RE relocation by replacing it
with invalid `call 0xbad2310` instruction (195896080 == 0xbad2310 reads
"bad relo" if you squint hard enough).
Luckily, libbpf has all the necessary information to look up CO-RE
relocation that failed and provide more human-readable description of
what's going on:
5: <invalid CO-RE relocation>
failed to resolve CO-RE relocation <byte_off> [6] struct task_struct___bad.fake_field_subprog (0:2 @ offset 8)
This hopefully makes it much easier to understand what's wrong with
user's BPF program without googling magic constants.
This BPF verifier log fixup is setup to be extensible and is going to be
used for at least one other upcoming feature of libbpf in follow up patches.
Libbpf is parsing lines of BPF verifier log starting from the very end.
Currently it processes up to 10 lines of code looking for familiar
patterns. This avoids wasting lots of CPU processing huge verifier logs
(especially for log_level=2 verbosity level). Actual verification error
should normally be found in last few lines, so this should work
reliably.
If libbpf needs to expand log beyond available log_buf_size, it
truncates the end of the verifier log. Given verifier log normally ends
with something like:
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
... truncating this on program load error isn't too bad (end user can
always increase log size, if it needs to get complete log).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-10-andrii@kernel.org
Simplify bpf_core_parse_spec() signature to take struct bpf_core_relo as
an input instead of requiring callers to decompose them into type_id,
relo, spec_str, etc. This makes using and reusing this helper easier.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-9-andrii@kernel.org
Refactor how CO-RE relocation is formatted. Now it dumps human-readable
representation, currently used by libbpf in either debug or error
message output during CO-RE relocation resolution process, into provided
buffer. This approach allows for better reuse of this functionality
outside of CO-RE relocation resolution, which we'll use in next patch
for providing better error message for BPF verifier rejecting BPF
program due to unguarded failed CO-RE relocation.
It also gets rid of annoying "stitching" of libbpf_print() calls, which
was the only place where we did this.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-8-andrii@kernel.org
Previously, libbpf recorded CO-RE relocations with insns_idx resolved
according to finalized subprog locations (which are appended at the end
of entry BPF program) to simplify the job of light skeleton generator.
This is necessary because once subprogs' instructions are appended to
main entry BPF program all the subprog instruction indices are shifted
and that shift is different for each entry (main) BPF program, so it's
generally impossible to map final absolute insn_idx of the finalized BPF
program to their original locations inside subprograms.
This information is now going to be used not only during light skeleton
generation, but also to map absolute instruction index to subprog's
instruction and its corresponding CO-RE relocation. So start recording
these relocations always, not just when obj->gen_loader is set.
This information is going to be freed at the end of bpf_object__load()
step, as before (but this can change in the future if there will be
a need for this information post load step).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-7-andrii@kernel.org
Instead of using ELF section names as a joining key between .BTF.ext and
corresponding BPF programs, pre-build .BTF.ext section number to ELF
section index mapping during bpf_object__open() and use it later for
matching .BTF.ext information (func/line info or CO-RE relocations) to
their respective BPF programs and subprograms.
This simplifies corresponding joining logic and let's libbpf do
manipulations with BPF program's ELF sections like dropping leading '?'
character for non-autoloaded programs. Original joining logic in
bpf_object__relocate_core() (see relevant comment that's now removed)
was never elegant, so it's a good improvement regardless. But it also
avoids unnecessary internal assumptions about preserving original ELF
section name as BPF program's section name (which was broken when
SEC("?abc") support was added).
Fixes: a3820c4811 ("libbpf: Support opting out from autoloading BPF programs declaratively")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-5-andrii@kernel.org
Fix the bug in bpf_object__relocate_core() which can lead to finding
invalid matching BPF program when processing CO-RE relocation. IF
matching program is not found, last encountered program will be assumed
to be correct program and thus error detection won't detect the problem.
Fixes: 9c82a63cf3 ("libbpf: Fix CO-RE relocs against .text section")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-4-andrii@kernel.org
libbpf pretends it knows actual limit of BPF program instructions based
on UAPI headers it compiled with. There is neither any guarantee that
UAPI headers match host kernel, nor BPF verifier actually uses
BPF_MAXINSNS constant anymore. Just drop unhelpful "guess", BPF verifier
will emit actual reason for failure in its logs anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-3-andrii@kernel.org
Use type name for checking whether CO-RE relocation is referring to
anonymous type. Using spec string makes no sense.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-2-andrii@kernel.org
Include convenience definitions:
__kptr: Unreferenced kptr
__kptr_ref: Referenced kptr
Users can use them to tag the pointer type meant to be used with the new
support directly in the map value definition.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-11-memxor@gmail.com
The link variable is already of type 'struct bpf_link *', casting it to
'struct bpf_link *' is redundant, drop it.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220424143420.457082-1-ytcoode@gmail.com
Teach bpf_link_create() to fallback to bpf_raw_tracepoint_open() on
older kernels for programs that are attachable through
BPF_RAW_TRACEPOINT_OPEN. This makes bpf_link_create() more unified and
convenient interface for creating bpf_link-based attachments.
With this approach end users can just use bpf_link_create() for
tp_btf/fentry/fexit/fmod_ret/lsm program attachments without needing to
care about kernel support, as libbpf will handle this transparently. On
the other hand, as newer features (like BPF cookie) are added to
LINK_CREATE interface, they will be readily usable though the same
bpf_link_create() API without any major refactoring from user's
standpoint.
bpf_program__attach_btf_id() is now using bpf_link_create() internally
as well and will take advantaged of this unified interface when BPF
cookie is added for fentry/fexit.
Doing proactive feature detection of LINK_CREATE support for
fentry/tp_btf/etc is quite involved. It requires parsing vmlinux BTF,
determining some stable and guaranteed to be in all kernels versions
target BTF type (either raw tracepoint or fentry target function),
actually attaching this program and thus potentially affecting the
performance of the host kernel briefly, etc. So instead we are taking
much simpler "lazy" approach of falling back to
bpf_raw_tracepoint_open() call only if initial LINK_CREATE command
fails. For modern kernels this will mean zero added overhead, while
older kernels will incur minimal overhead with a single fast-failing
LINK_CREATE call.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-3-andrii@kernel.org
This adds documentation for the following API functions:
- bpf_program__set_expected_attach_type()
- bpf_program__set_type()
- bpf_program__set_attach_target()
- bpf_program__attach()
- bpf_program__pin()
- bpf_program__unpin()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420161226.86803-3-grantseltzer@gmail.com
This updates usage of the following API functions within
libbpf so their newly added error return is checked:
- bpf_program__set_expected_attach_type()
- bpf_program__set_type()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420161226.86803-2-grantseltzer@gmail.com
This adds an error return to the following API functions:
- bpf_program__set_expected_attach_type()
- bpf_program__set_type()
In both cases, the error occurs when the BPF object has
already been loaded when the function is called. In this
case -EBUSY is returned.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420161226.86803-1-grantseltzer@gmail.com
Add riscv-specific USDT argument specification parsing logic.
riscv USDT argument format is shown below:
- Memory dereference case:
"size@off(reg)", e.g. "-8@-88(s0)"
- Constant value case:
"size@val", e.g. "4@5"
- Register read case:
"size@reg", e.g. "-8@a1"
s8 will be marked as poison while it's a reg of riscv, we need
to alias it in advance. Both RV32 and RV64 have been tested.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220419145238.482134-3-pulehui@huawei.com
The usdt_cookie is defined as __u64, which should not be
used as a long type because it will be cast to 32 bits
in 32-bit platforms.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220419145238.482134-2-pulehui@huawei.com
Establish SEC("?abc") naming convention (i.e., adding question mark in
front of otherwise normal section name) that allows to set corresponding
program's autoload property to false. This is effectively just
a declarative way to do bpf_program__set_autoload(prog, false).
Having a way to do this declaratively in BPF code itself is useful and
convenient for various scenarios. E.g., for testing, when BPF object
consists of multiple independent BPF programs that each needs to be
tested separately. Opting out all of them by default and then setting
autoload to true for just one of them at a time simplifies testing code
(see next patch for few conversions in BPF selftests taking advantage of
this new feature).
Another real-world use case is in libbpf-tools for cases when different
BPF programs have to be picked depending on particulars of the host
kernel due to various incompatible changes (like kernel function renames
or signature change, or to pick kprobe vs fentry depending on
corresponding kernel support for the latter). Marking all the different
BPF program candidates as non-autoloaded declaratively makes this more
obvious in BPF source code and allows simpler code in user-space code.
When BPF program marked as SEC("?abc") it is otherwise treated just like
SEC("abc") and bpf_program__section_name() reported will be "abc".
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419002452.632125-1-andrii@kernel.org
Parsing of USDT arguments is architecture-specific. On aarch64 it is
relatively easy since registers used are x[0-31] and sp. Format is
slightly different compared to x86_64. Possible forms are:
- "size@[reg[,offset]]" for dereferences, e.g. "-8@[sp,76]" and "-4@[sp]";
- "size@reg" for register values, e.g. "-4@x0";
- "size@value" for raw values, e.g. "-8@1".
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649690496-1902-2-git-send-email-alan.maguire@oracle.com
Background:
Libbpf automatically replaces calls to BPF bpf_probe_read_{kernel,user}
[_str]() helpers with bpf_probe_read[_str](), if libbpf detects that
kernel doesn't support new APIs. Specifically, libbpf invokes the
probe_kern_probe_read_kernel function to load a small eBPF program into
the kernel in which bpf_probe_read_kernel API is invoked and lets the
kernel checks whether the new API is valid. If the loading fails, libbpf
considers the new API invalid and replaces it with the old API.
static int probe_kern_probe_read_kernel(void)
{
struct bpf_insn insns[] = {
BPF_MOV64_REG(BPF_REG_1, BPF_REG_10), /* r1 = r10 (fp) */
BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -8), /* r1 += -8 */
BPF_MOV64_IMM(BPF_REG_2, 8), /* r2 = 8 */
BPF_MOV64_IMM(BPF_REG_3, 0), /* r3 = 0 */
BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_probe_read_kernel),
BPF_EXIT_INSN(),
};
int fd, insn_cnt = ARRAY_SIZE(insns);
fd = bpf_prog_load(BPF_PROG_TYPE_KPROBE, NULL,
"GPL", insns, insn_cnt, NULL);
return probe_fd(fd);
}
Bug:
On older kernel versions [0], the kernel checks whether the version
number provided in the bpf syscall, matches the LINUX_VERSION_CODE.
If not matched, the bpf syscall fails. eBPF However, the
probe_kern_probe_read_kernel code does not set the kernel version
number provided to the bpf syscall, which causes the loading process
alwasys fails for old versions. It means that libbpf will replace the
new API with the old one even the kernel supports the new one.
Solution:
After a discussion in [1], the solution is using BPF_PROG_TYPE_TRACEPOINT
program type instead of BPF_PROG_TYPE_KPROBE because kernel does not
enfoce version check for tracepoint programs. I test the patch in old
kernels (4.18 and 4.19) and it works well.
[0] https://elixir.bootlin.com/linux/v4.19/source/kernel/bpf/syscall.c#L1360
[1] Closes: https://github.com/libbpf/libbpf/issues/473
Signed-off-by: Runqing Yang <rainkin1993@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409144928.27499-1-rainkin1993@gmail.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-09
We've added 63 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 4852 insertions(+), 619 deletions(-).
The main changes are:
1) Add libbpf support for USDT (User Statically-Defined Tracing) probes.
USDTs are an abstraction built on top of uprobes, critical for tracing
and BPF, and widely used in production applications, from Andrii Nakryiko.
2) While Andrii was adding support for x86{-64}-specific logic of parsing
USDT argument specification, Ilya followed-up with USDT support for s390
architecture, from Ilya Leoshkevich.
3) Support name-based attaching for uprobe BPF programs in libbpf. The format
supported is `u[ret]probe/binary_path:[raw_offset|function[+offset]]`, e.g.
attaching to libc malloc can be done in BPF via SEC("uprobe/libc.so.6:malloc")
now, from Alan Maguire.
4) Various load/store optimizations for the arm64 JIT to shrink the image
size by using arm64 str/ldr immediate instructions. Also enable pointer
authentication to verify return address for JITed code, from Xu Kuohai.
5) BPF verifier fixes for write access checks to helper functions, e.g.
rd-only memory from bpf_*_cpu_ptr() must not be passed to helpers that
write into passed buffers, from Kumar Kartikeya Dwivedi.
6) Fix overly excessive stack map allocation for its base map structure and
buckets which slipped-in from cleanups during the rlimit accounting removal
back then, from Yuntao Wang.
7) Extend the unstable CT lookup helpers for XDP and tc/BPF to report netfilter
connection tracking tuple direction, from Lorenzo Bianconi.
8) Improve bpftool dump to show BPF program/link type names, Milan Landaverde.
9) Minor cleanups all over the place from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits)
bpf: Fix excessive memory allocation in stack_map_alloc()
selftests/bpf: Fix return value checks in perf_event_stackmap test
selftests/bpf: Add CO-RE relos into linked_funcs selftests
libbpf: Use weak hidden modifier for USDT BPF-side API functions
libbpf: Don't error out on CO-RE relos for overriden weak subprogs
samples, bpf: Move routes monitor in xdp_router_ipv4 in a dedicated thread
libbpf: Allow WEAK and GLOBAL bindings during BTF fixup
libbpf: Use strlcpy() in path resolution fallback logic
libbpf: Add s390-specific USDT arg spec parsing logic
libbpf: Make BPF-side of USDT support work on big-endian machines
libbpf: Minor style improvements in USDT code
libbpf: Fix use #ifdef instead of #if to avoid compiler warning
libbpf: Potential NULL dereference in usdt_manager_attach_usdt()
selftests/bpf: Uprobe tests should verify param/return values
libbpf: Improve string parsing for uprobe auto-attach
libbpf: Improve library identification for uprobe binary path resolution
selftests/bpf: Test for writes to map key from BPF helpers
selftests/bpf: Test passing rdonly mem to global func
bpf: Reject writes for PTR_TO_MAP_KEY in check_helper_mem_access
bpf: Check PTR_TO_MEM | MEM_RDONLY in check_helper_mem_access
...
====================
Link: https://lore.kernel.org/r/20220408231741.19116-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use __weak __hidden for bpf_usdt_xxx() APIs instead of much more
confusing `static inline __noinline`. This was previously impossible due
to libbpf erroring out on CO-RE relocations pointing to eliminated weak
subprogs. Now that previous patch fixed this issue, switch back to
__weak __hidden as it's a more direct way of specifying the desired
behavior.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408181425.2287230-3-andrii@kernel.org
During BPF static linking, all the ELF relocations and .BTF.ext
information (including CO-RE relocations) are preserved for __weak
subprograms that were logically overriden by either previous weak
subprogram instance or by corresponding "strong" (non-weak) subprogram.
This is just how native user-space linkers work, nothing new.
But libbpf is over-zealous when processing CO-RE relocation to error out
when CO-RE relocation belonging to such eliminated weak subprogram is
encountered. Instead of erroring out on this expected situation, log
debug-level message and skip the relocation.
Fixes: db2b8b0642 ("libbpf: Support CO-RE relocations for multi-prog sections")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408181425.2287230-2-andrii@kernel.org
During BTF fix up for global variables, global variable can be global
weak and will have STB_WEAK binding in ELF. Support such global
variables in addition to non-weak ones.
This is not the problem when using BPF static linking, as BPF static
linker "fixes up" BTF during generation so that libbpf doesn't have to
do it anymore during bpf_object__open(), which led to this not being
noticed for a while, along with a pretty rare (currently) use of __weak
variables and maps.
Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220407230446.3980075-2-andrii@kernel.org
Coverity static analyzer complains that strcpy() can cause buffer
overflow. Use libbpf_strlcpy() instead to be 100% sure this doesn't
happen.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220407230446.3980075-1-andrii@kernel.org
The logic is superficially similar to that of x86, but the small
differences (no need for register table and dynamic allocation of
register names, no $ sign before constants) make maintaining a common
implementation too burdensome. Therefore simply add a s390x-specific
version of parse_usdt_arg().
Note that while bcc supports index registers, this patch does not. This
should not be a problem in most cases, since s390 uses a default value
"nor" for STAP_SDT_ARG_CONSTRAINT.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220407214411.257260-4-iii@linux.ibm.com
BPF_USDT_ARG_REG_DEREF handling always reads 8 bytes, regardless of
the actual argument size. On little-endian the relevant argument bits
end up in the lower bits of val, and later on the code that handles
all the argument types expects them to be there.
On big-endian they end up in the upper bits of val, breaking that
expectation. Fix by right-shifting val on big-endian.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220407214411.257260-3-iii@linux.ibm.com
Fix several typos and references to non-existing headers.
Also use __BYTE_ORDER__ instead of __BYTE_ORDER for consistency with
the rest of the bpf code - see commit 45f2bebc80 ("libbpf: Fix
endianness detection in BPF_CORE_READ_BITFIELD_PROBED()") for
rationale).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220407214411.257260-2-iii@linux.ibm.com
As reported by Naresh:
perf build errors on i386 [1] on Linux next-20220407 [2]
usdt.c:1181:5: error: "__x86_64__" is not defined, evaluates to 0
[-Werror=undef]
1181 | #if __x86_64__
| ^~~~~~~~~~
usdt.c:1196:5: error: "__x86_64__" is not defined, evaluates to 0
[-Werror=undef]
1196 | #if __x86_64__
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Use #ifdef instead of #if to avoid this.
Fixes: 4c59e584d1 ("libbpf: Add x86-specific USDT arg spec parsing logic")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220407203842.3019904-1-andrii@kernel.org
For uprobe auto-attach, the parsing can be simplified for the SEC()
name to a single sscanf(); the return value of the sscanf can then
be used to distinguish between sections that simply specify
"u[ret]probe" (and thus cannot auto-attach), those that specify
"u[ret]probe/binary_path:function+offset" etc.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649245431-29956-3-git-send-email-alan.maguire@oracle.com
In the process of doing path resolution for uprobe attach, libraries are
identified by matching a ".so" substring in the binary_path.
This matches a lot of patterns that do not conform to library.so[.version]
format, so instead match a ".so" _suffix_, and if that fails match a
".so." substring for the versioned library case.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649245431-29956-2-git-send-email-alan.maguire@oracle.com
Add x86/x86_64-specific USDT argument specification parsing. Each
architecture will require their own logic, as all this is arch-specific
assembly-based notation. Architectures that libbpf doesn't support for
USDTs will pr_warn() with specific error and return -ENOTSUP.
We use sscanf() as a very powerful and easy to use string parser. Those
spaces in sscanf's format string mean "skip any whitespaces", which is
pretty nifty (and somewhat little known) feature.
All this was tested on little-endian architecture, so bit shifts are
probably off on big-endian, which our CI will hopefully prove.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-6-andrii@kernel.org
Last part of architecture-agnostic user-space USDT handling logic is to
set up BPF spec and, optionally, IP-to-ID maps from user-space.
usdt_manager performs a compact spec ID allocation to utilize
fixed-sized BPF maps as efficiently as possible. We also use hashmap to
deduplicate USDT arg spec strings and map identical strings to single
USDT spec, minimizing the necessary BPF map size. usdt_manager supports
arbitrary sequences of attachment and detachment, both of the same USDT
and multiple different USDTs and internally maintains a free list of
unused spec IDs. bpf_link_usdt's logic is extended with proper setup and
teardown of this spec ID free list and supporting BPF maps.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-5-andrii@kernel.org
Implement architecture-agnostic parts of USDT parsing logic. The code is
the documentation in this case, it's futile to try to succinctly
describe how USDT parsing is done in any sort of concreteness. But
still, USDTs are recorded in special ELF notes section (.note.stapsdt),
where each USDT call site is described separately. Along with USDT
provider and USDT name, each such note contains USDT argument
specification, which uses assembly-like syntax to describe how to fetch
value of USDT argument. USDT arg spec could be just a constant, or
a register, or a register dereference (most common cases in x86_64), but
it technically can be much more complicated cases, like offset relative
to global symbol and stuff like that. One of the later patches will
implement most common subset of this for x86 and x86-64 architectures,
which seems to handle a lot of real-world production application.
USDT arg spec contains a compact encoding allowing usdt.bpf.h from
previous patch to handle the above 3 cases. Instead of recording which
register might be needed, we encode register's offset within struct
pt_regs to simplify BPF-side implementation. USDT argument can be of
different byte sizes (1, 2, 4, and 8) and signed or unsigned. To handle
this, libbpf pre-calculates necessary bit shifts to do proper casting
and sign-extension in a short sequences of left and right shifts.
The rest is in the code with sometimes extensive comments and references
to external "documentation" for USDTs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-4-andrii@kernel.org
Wire up libbpf USDT support APIs without yet implementing all the
nitty-gritty details of USDT discovery, spec parsing, and BPF map
initialization.
User-visible user-space API is simple and is conceptually very similar
to uprobe API.
bpf_program__attach_usdt() API allows to programmatically attach given
BPF program to a USDT, specified through binary path (executable or
shared lib), USDT provider and name. Also, just like in uprobe case, PID
filter is specified (0 - self, -1 - any process, or specific PID).
Optionally, USDT cookie value can be specified. Such single API
invocation will try to discover given USDT in specified binary and will
use (potentially many) BPF uprobes to attach this program in correct
locations.
Just like any bpf_program__attach_xxx() APIs, bpf_link is returned that
represents this attachment. It is a virtual BPF link that doesn't have
direct kernel object, as it can consist of multiple underlying BPF
uprobe links. As such, attachment is not atomic operation and there can
be brief moment when some USDT call sites are attached while others are
still in the process of attaching. This should be taken into
consideration by user. But bpf_program__attach_usdt() guarantees that
in the case of success all USDT call sites are successfully attached, or
all the successfuly attachments will be detached as soon as some USDT
call sites failed to be attached. So, in theory, there could be cases of
failed bpf_program__attach_usdt() call which did trigger few USDT
program invocations. This is unavoidable due to multi-uprobe nature of
USDT and has to be handled by user, if it's important to create an
illusion of atomicity.
USDT BPF programs themselves are marked in BPF source code as either
SEC("usdt"), in which case they won't be auto-attached through
skeleton's <skel>__attach() method, or it can have a full definition,
which follows the spirit of fully-specified uprobes:
SEC("usdt/<path>:<provider>:<name>"). In the latter case skeleton's
attach method will attempt auto-attachment. Similarly, generic
bpf_program__attach() will have enought information to go off of for
parameterless attachment.
USDT BPF programs are actually uprobes, and as such for kernel they are
marked as BPF_PROG_TYPE_KPROBE.
Another part of this patch is USDT-related feature probing:
- BPF cookie support detection from user-space;
- detection of kernel support for auto-refcounting of USDT semaphore.
The latter is optional. If kernel doesn't support such feature and USDT
doesn't rely on USDT semaphores, no error is returned. But if libbpf
detects that USDT requires setting semaphores and kernel doesn't support
this, libbpf errors out with explicit pr_warn() message. Libbpf doesn't
support poking process's memory directly to increment semaphore value,
like BCC does on legacy kernels, due to inherent raciness and danger of
such process memory manipulation. Libbpf let's kernel take care of this
properly or gives up.
Logistically, all the extra USDT-related infrastructure of libbpf is put
into a separate usdt.c file and abstracted behind struct usdt_manager.
Each bpf_object has lazily-initialized usdt_manager pointer, which is
only instantiated if USDT programs are attempted to be attached. Closing
BPF object frees up usdt_manager resources. usdt_manager keeps track of
USDT spec ID assignment and few other small things.
Subsequent patches will fill out remaining missing pieces of USDT
initialization and setup logic.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-3-andrii@kernel.org
Add BPF-side implementation of libbpf-provided USDT support. This
consists of single header library, usdt.bpf.h, which is meant to be used
from user's BPF-side source code. This header is added to the list of
installed libbpf header, along bpf_helpers.h and others.
BPF-side implementation consists of two BPF maps:
- spec map, which contains "a USDT spec" which encodes information
necessary to be able to fetch USDT arguments and other information
(argument count, user-provided cookie value, etc) at runtime;
- IP-to-spec-ID map, which is only used on kernels that don't support
BPF cookie feature. It allows to lookup spec ID based on the place
in user application that triggers USDT program.
These maps have default sizes, 256 and 1024, which are chosen
conservatively to not waste a lot of space, but handling a lot of common
cases. But there could be cases when user application needs to either
trace a lot of different USDTs, or USDTs are heavily inlined and their
arguments are located in a lot of differing locations. For such cases it
might be necessary to size those maps up, which libbpf allows to do by
overriding BPF_USDT_MAX_SPEC_CNT and BPF_USDT_MAX_IP_CNT macros.
It is an important aspect to keep in mind. Single USDT (user-space
equivalent of kernel tracepoint) can have multiple USDT "call sites".
That is, single logical USDT is triggered from multiple places in user
application. This can happen due to function inlining. Each such inlined
instance of USDT invocation can have its own unique USDT argument
specification (instructions about the location of the value of each of
USDT arguments). So while USDT looks very similar to usual uprobe or
kernel tracepoint, under the hood it's actually a collection of uprobes,
each potentially needing different spec to know how to fetch arguments.
User-visible API consists of three helper functions:
- bpf_usdt_arg_cnt(), which returns number of arguments of current USDT;
- bpf_usdt_arg(), which reads value of specified USDT argument (by
it's zero-indexed position) and returns it as 64-bit value;
- bpf_usdt_cookie(), which functions like BPF cookie for USDT
programs; this is necessary as libbpf doesn't allow specifying actual
BPF cookie and utilizes it internally for USDT support implementation.
Each bpf_usdt_xxx() APIs expect struct pt_regs * context, passed into
BPF program. On kernels that don't support BPF cookie it is used to
fetch absolute IP address of the underlying uprobe.
usdt.bpf.h also provides BPF_USDT() macro, which functions like
BPF_PROG() and BPF_KPROBE() and allows much more user-friendly way to
get access to USDT arguments, if USDT definition is static and known to
the user. It is expected that majority of use cases won't have to use
bpf_usdt_arg_cnt() and bpf_usdt_arg() directly and BPF_USDT() will cover
all their needs.
Last, usdt.bpf.h is utilizing BPF CO-RE for one single purpose: to
detect kernel support for BPF cookie. If BPF CO-RE dependency is
undesirable, user application can redefine BPF_USDT_HAS_BPF_COOKIE to
either a boolean constant (or equivalently zero and non-zero), or even
point it to its own .rodata variable that can be specified from user's
application user-space code. It is important that
BPF_USDT_HAS_BPF_COOKIE is known to BPF verifier as static value (thus
.rodata and not just .data), as otherwise BPF code will still contain
bpf_get_attach_cookie() BPF helper call and will fail validation at
runtime, if not dead-code eliminated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-2-andrii@kernel.org
attach_probe selftest fails on Debian-based distros with `failed to
resolve full path for 'libc.so.6'`. The reason is that these distros
embraced multiarch to the point where even for the "main" architecture
they store libc in /lib/<triple>.
This is configured in /etc/ld.so.conf and in theory it's possible to
replicate the loader's parsing and processing logic in libbpf, however
a much simpler solution is to just enumerate the known library paths.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220404225020.51029-1-iii@linux.ibm.com
Since core relos is an optional part of the .BTF.ext ELF section, we should
skip parsing it instead of returning -EINVAL if header size is less than
offsetofend(struct btf_ext_header, core_relo_len).
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220404005320.1723055-1-ytcoode@gmail.com
Now that u[ret]probes can use name-based specification, it makes
sense to add support for auto-attach based on SEC() definition.
The format proposed is
SEC("u[ret]probe/binary:[raw_offset|[function_name[+offset]]")
For example, to trace malloc() in libc:
SEC("uprobe/libc.so.6:malloc")
...or to trace function foo2 in /usr/bin/foo:
SEC("uprobe//usr/bin/foo:foo2")
Auto-attach is done for all tasks (pid -1). prog can be an absolute
path or simply a program/library name; in the latter case, we use
PATH/LD_LIBRARY_PATH to resolve the full path, falling back to
standard locations (/usr/bin:/usr/sbin or /usr/lib64:/usr/lib) if
the file is not found via environment-variable specified locations.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1648654000-21758-4-git-send-email-alan.maguire@oracle.com
kprobe attach is name-based, using lookups of kallsyms to translate
a function name to an address. Currently uprobe attach is done
via an offset value as described in [1]. Extend uprobe opts
for attach to include a function name which can then be converted
into a uprobe-friendly offset. The calcualation is done in
several steps:
1. First, determine the symbol address using libelf; this gives us
the offset as reported by objdump
2. If the function is a shared library function - and the binary
provided is a shared library - no further work is required;
the address found is the required address
3. Finally, if the function is local, subtract the base address
associated with the object, retrieved from ELF program headers.
The resultant value is then added to the func_offset value passed
in to specify the uprobe attach address. So specifying a func_offset
of 0 along with a function name "printf" will attach to printf entry.
The modes of operation supported are then
1. to attach to a local function in a binary; function "foo1" in
"/usr/bin/foo"
2. to attach to a shared library function in a shared library -
function "malloc" in libc.
[1] https://www.kernel.org/doc/html/latest/trace/uprobetracer.html
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1648654000-21758-3-git-send-email-alan.maguire@oracle.com
bpf_program__attach_uprobe_opts() requires a binary_path argument
specifying binary to instrument. Supporting simply specifying
"libc.so.6" or "foo" should be possible too.
Library search checks LD_LIBRARY_PATH, then /usr/lib64, /usr/lib.
This allows users to run BPF programs prefixed with
LD_LIBRARY_PATH=/path2/lib while still searching standard locations.
Similarly for non .so files, we check PATH and /usr/bin, /usr/sbin.
Path determination will be useful for auto-attach of BPF uprobe programs
using SEC() definition.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1648654000-21758-2-git-send-email-alan.maguire@oracle.com
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
If BPF object doesn't have an BTF info, don't attempt to search for BTF
types describing BPF map key or value layout.
Fixes: 262cfb74ff ("libbpf: Init btf_{key,value}_type_id on internal map open")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220320001911.3640917-1-andrii@kernel.org
Currently, libbpf considers a single routine in .text to be a program. This
is particularly confusing when it comes to library objects - a single routine
meant to be used as an extern will instead be considered a bpf_program.
This patch hides this compatibility behavior behind the pre-existing
SEC_NAME strict mode flag.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/018de8d0d67c04bf436055270d35d394ba393505.1647473511.git.delyank@fb.com
Adding bpf_program__attach_kprobe_multi_opts function for attaching
kprobe program to multiple functions.
struct bpf_link *
bpf_program__attach_kprobe_multi_opts(const struct bpf_program *prog,
const char *pattern,
const struct bpf_kprobe_multi_opts *opts);
User can specify functions to attach with 'pattern' argument that
allows wildcards (*?' supported) or provide symbols or addresses
directly through opts argument. These 3 options are mutually
exclusive.
When using symbols or addresses, user can also provide cookie value
for each symbol/address that can be retrieved later in bpf program
with bpf_get_attach_cookie helper.
struct bpf_kprobe_multi_opts {
size_t sz;
const char **syms;
const unsigned long *addrs;
const __u64 *cookies;
size_t cnt;
bool retprobe;
size_t :0;
};
Symbols, addresses and cookies are provided through opts object
(syms/addrs/cookies) as array pointers with specified count (cnt).
Each cookie value is paired with provided function address or symbol
with the same array index.
The program can be also attached as return probe if 'retprobe' is set.
For quick usage with NULL opts argument, like:
bpf_program__attach_kprobe_multi_opts(prog, "ksys_*", NULL)
the 'prog' will be attached as kprobe to 'ksys_*' functions.
Also adding new program sections for automatic attachment:
kprobe.multi/<symbol_pattern>
kretprobe.multi/<symbol_pattern>
The symbol_pattern is used as 'pattern' argument in
bpf_program__attach_kprobe_multi_opts function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-10-jolsa@kernel.org
Adding new kprobe_multi struct to bpf_link_create_opts object
to pass multiple kprobe data to link_create attr uapi.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-9-jolsa@kernel.org
Move the kallsyms parsing in internal libbpf_kallsyms_parse
function, so it can be used from other places.
It will be used in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-8-jolsa@kernel.org
Add support for setting the new batch_size parameter to BPF_PROG_TEST_RUN
to libbpf; just add it as an option and pass it through to the kernel.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-4-toke@redhat.com
Fix the following coccicheck warning:
tools/lib/bpf/bpf.c:114:31-32: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:484:34-35: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:485:35-36: WARNING: Use ARRAY_SIZE
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220306023426.19324-1-guozhengkui@vivo.com
xsk_umem__create() does mmap for fill/comp rings, but xsk_umem__delete()
doesn't do the unmap. This works fine for regular cases, because
xsk_socket__delete() does unmap for the rings. But for the case that
xsk_socket__create_shared() fails, umem rings are not unmapped.
fill_save/comp_save are checked to determine if rings have already be
unmapped by xsk. If fill_save and comp_save are NULL, it means that the
rings have already been used by xsk. Then they are supposed to be
unmapped by xsk_socket__delete(). Otherwise, xsk_umem__delete() does the
unmap.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Cheng Li <lic121@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220301132623.GA19995@vscode.7~
Allow registering and unregistering custom handlers for BPF program.
This allows user applications and libraries to plug into libbpf's
declarative SEC() definition handling logic. This allows to offload
complex and intricate custom logic into external libraries, but still
provide a great user experience.
One such example is USDT handling library, which has a lot of code and
complexity which doesn't make sense to put into libbpf directly, but it
would be really great for users to be able to specify BPF programs with
something like SEC("usdt/<path-to-binary>:<usdt_provider>:<usdt_name>")
and have correct BPF program type set (BPF_PROGRAM_TYPE_KPROBE, as it is
uprobe) and even support BPF skeleton's auto-attach logic.
In some cases, it might be even good idea to override libbpf's default
handling, like for SEC("perf_event") programs. With custom library, it's
possible to extend logic to support specifying perf event specification
right there in SEC() definition without burdening libbpf with lots of
custom logic or extra library dependecies (e.g., libpfm4). With current
patch it's possible to override libbpf's SEC("perf_event") handling and
specify a completely custom ones.
Further, it's possible to specify a generic fallback handling for any
SEC() that doesn't match any other custom or standard libbpf handlers.
This allows to accommodate whatever legacy use cases there might be, if
necessary.
See doc comments for libbpf_register_prog_handler() and
libbpf_unregister_prog_handler() for detailed semantics.
This patch also bumps libbpf development version to v0.8 and adds new
APIs there.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-3-andrii@kernel.org
Allow some BPF program types to support auto-attach only in subste of
cases. Currently, if some BPF program type specifies attach callback, it
is assumed that during skeleton attach operation all such programs
either successfully attach or entire skeleton attachment fails. If some
program doesn't support auto-attachment from skeleton, such BPF program
types shouldn't have attach callback specified.
This is limiting for cases when, depending on how full the SEC("")
definition is, there could either be enough details to support
auto-attach or there might not be and user has to use some specific API
to provide more details at runtime.
One specific example of such desired behavior might be SEC("uprobe"). If
it's specified as just uprobe auto-attach isn't possible. But if it's
SEC("uprobe/<some_binary>:<some_func>") then there are enough details to
support auto-attach. Note that there is a somewhat subtle difference
between auto-attach behavior of BPF skeleton and using "generic"
bpf_program__attach(prog) (which uses the same attach handlers under the
cover). Skeleton allow some programs within bpf_object to not have
auto-attach implemented and doesn't treat that as an error. Instead such
BPF programs are just skipped during skeleton's (optional) attach step.
bpf_program__attach(), on the other hand, is called when user *expects*
auto-attach to work, so if specified program doesn't implement or
doesn't support auto-attach functionality, that will be treated as an
error.
Another improvement to the way libbpf is handling SEC()s would be to not
require providing dummy kernel function name for kprobe. Currently,
SEC("kprobe/whatever") is necessary even if actual kernel function is
determined by user at runtime and bpf_program__attach_kprobe() is used
to specify it. With changes in this patch, it's possible to support both
SEC("kprobe") and SEC("kprobe/<actual_kernel_function"), while only in
the latter case auto-attach will be performed. In the former one, such
kprobe will be skipped during skeleton attach operation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-2-andrii@kernel.org
The page_cnt parameter is used to specify the number of memory pages
allocated for each per-CPU buffer, it must be non-zero and a power of 2.
Currently, the __perf_buffer__new() function attempts to validate that
the page_cnt is a power of 2 but forgets checking for the case where
page_cnt is zero, we can fix it by replacing 'page_cnt & (page_cnt - 1)'
with 'page_cnt == 0 || (page_cnt & (page_cnt - 1))'.
If so, we also don't need to add a check in perf_buffer__new_v0_6_0() to
make sure that page_cnt is non-zero and the check for zero in
perf_buffer__new_raw_v0_6_0() can also be removed.
The code will be cleaner and more readable.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220303005921.53436-1-ytcoode@gmail.com
Currently if a declaration appears in the BTF before the definition, the
definition is dumped as a conflicting name, e.g.:
$ bpftool btf dump file vmlinux format raw | grep "'unix_sock'"
[81287] FWD 'unix_sock' fwd_kind=struct
[89336] STRUCT 'unix_sock' size=1024 vlen=14
$ bpftool btf dump file vmlinux format c | grep "struct unix_sock"
struct unix_sock;
struct unix_sock___2 { <--- conflict, the "___2" is unexpected
struct unix_sock___2 *unix_sk;
This causes a compilation error if the dump output is used as a header file.
Fix it by skipping declaration when counting duplicated type names.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220301053250.1464204-2-xukuohai@huawei.com
When a BPF map of type BPF_MAP_TYPE_PERF_EVENT_ARRAY doesn't have the
max_entries parameter set, the map will be created with max_entries set
to the number of available CPUs. When we try to reuse such a pinned map,
map_is_reuse_compat will return false, as max_entries in the map
definition differs from max_entries of the existing map, causing the
following error:
libbpf: couldn't reuse pinned map at '/sys/fs/bpf/m_logging': parameter mismatch
Fix this by overwriting max_entries in the map definition. For this to
work, we need to do this in bpf_object__create_maps, before calling
bpf_object__reuse_map.
Fixes: 57a00f4164 ("libbpf: Add auto-pinning of maps when loading BPF objects")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220225152355.315204-1-stijn@linux-ipv6.be
The check in the last return statement is unnecessary, we can just return
the ret variable.
But we can simplify the function further by returning 0 immediately if we
find the section size and -ENOENT otherwise.
Thus we can also remove the ret variable.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220223085244.3058118-1-ytcoode@gmail.com
The check 't->size && t->size != size' is redundant because if t->size
compares unequal to 0, we will just skip straight to sorting variables.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220220072750.209215-1-ytcoode@gmail.com
BTFGen needs to run the core relocation logic in order to understand
what are the types involved in a given relocation.
Currently bpf_core_apply_relo() calculates and **applies** a relocation
to an instruction. Having both operations in the same function makes it
difficult to only calculate the relocation without patching the
instruction. This commit splits that logic in two different phases: (1)
calculate the relocation and (2) patch the instruction.
For the first phase bpf_core_apply_relo() is renamed to
bpf_core_calc_relo_insn() who is now only on charge of calculating the
relocation, the second phase uses the already existing
bpf_core_patch_insn(). bpf_object__relocate_core() uses both of them and
the BTFGen will use only bpf_core_calc_relo_insn().
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-2-mauricio@kinvolk.io
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
When receiving netlink messages, libbpf was using a statically allocated
stack buffer of 4k bytes. This happened to work fine on systems with a 4k
page size, but on systems with larger page sizes it can lead to truncated
messages. The user-visible impact of this was that libbpf would insist no
XDP program was attached to some interfaces because that bit of the netlink
message got chopped off.
Fix this by switching to a dynamically allocated buffer; we borrow the
approach from iproute2 of using recvmsg() with MSG_PEEK|MSG_TRUNC to get
the actual size of the pending message before receiving it, adjusting the
buffer as necessary. While we're at it, also add retries on interrupted
system calls around the recvmsg() call.
v2:
- Move peek logic to libbpf_netlink_recv(), don't double free on ENOMEM.
Fixes: 8bbb77b7c7 ("libbpf: Add various netlink helpers")
Reported-by: Zhiqian Guan <zhguan@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20220211234819.612288-1-toke@redhat.com
Prepare light skeleton to be used in the kernel module and in the user space.
The look and feel of lskel.h is mostly the same with the difference that for
user space the skel->rodata is the same pointer before and after skel_load
operation, while in the kernel the skel->rodata after skel_open and the
skel->rodata after skel_load are different pointers.
Typical usage of skeleton remains the same for kernel and user space:
skel = my_bpf__open();
skel->rodata->my_global_var = init_val;
err = my_bpf__load(skel);
err = my_bpf__attach(skel);
// access skel->rodata->my_global_var;
// access skel->bss->another_var;
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209232001.27490-3-alexei.starovoitov@gmail.com
On ppc64le architecture __s64 is long int and requires %ld. Cast to
ssize_t and use %zd to avoid architecture-specific specifiers.
Fixes: 4172843ed4 ("libbpf: Fix signedness bug in btf_dump_array_data()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220209063909.1268319-1-andrii@kernel.org
Add syscall-specific variant of BPF_KPROBE named BPF_KPROBE_SYSCALL ([0]).
The new macro hides the underlying way of getting syscall input arguments.
With the new macro, the following code:
SEC("kprobe/__x64_sys_close")
int BPF_KPROBE(do_sys_close, struct pt_regs *regs)
{
int fd;
fd = PT_REGS_PARM1_CORE(regs);
/* do something with fd */
}
can be written as:
SEC("kprobe/__x64_sys_close")
int BPF_KPROBE_SYSCALL(do_sys_close, int fd)
{
/* do something with fd */
}
[0] Closes: https://github.com/libbpf/libbpf/issues/425
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207143134.2977852-2-hengqi.chen@gmail.com
On s390, the first syscall argument should be accessed via orig_gpr2
(see arch/s390/include/asm/syscall.h). Currently gpr[2] is used
instead, leading to bpf_syscall_macro test failure.
orig_gpr2 cannot be added to user_pt_regs, since its layout is a part
of the ABI. Therefore provide access to it only through
PT_REGS_PARM1_CORE_SYSCALL() by using a struct pt_regs flavor.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-11-iii@linux.ibm.com
On arm64, the first syscall argument should be accessed via orig_x0
(see arch/arm64/include/asm/syscall.h). Currently regs[0] is used
instead, leading to bpf_syscall_macro test failure.
orig_x0 cannot be added to struct user_pt_regs, since its layout is a
part of the ABI. Therefore provide access to it only through
PT_REGS_PARM1_CORE_SYSCALL() by using a struct pt_regs flavor.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-10-iii@linux.ibm.com
riscv does not select ARCH_HAS_SYSCALL_WRAPPER, so its syscall
handlers take "unpacked" syscall arguments. Indicate this to libbpf
using PT_REGS_SYSCALL_REGS macro.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-7-iii@linux.ibm.com
riscv registers are accessed via struct user_regs_struct, not struct
pt_regs. The program counter member in this struct is called pc, not
epc. The frame pointer is called s0, not fp.
Fixes: 3cc31d7940 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-6-iii@linux.ibm.com
powerpc does not select ARCH_HAS_SYSCALL_WRAPPER, so its syscall
handlers take "unpacked" syscall arguments. Indicate this to libbpf
using PT_REGS_SYSCALL_REGS macro.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-5-iii@linux.ibm.com
Architectures that select ARCH_HAS_SYSCALL_WRAPPER pass a pointer to
struct pt_regs to syscall handlers, others unpack it into individual
function parameters. Introduce a macro to describe what a particular
arch does.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220209021745.2215452-3-iii@linux.ibm.com
The btf__resolve_size() function returns negative error codes so
"elem_size" must be signed for the error handling to work.
Fixes: 920d16af9b ("libbpf: BTF dumper support for typed data")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220208071552.GB10495@kili
libbpf_set_strict_mode() checks that the passed mode doesn't contain
extra bits for LIBBPF_STRICT_* flags that don't exist yet.
It makes it difficult for applications to disable some strict flags as
something like "LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS"
is rejected by this check and they have to use a rather complicated
formula to calculate it.[0]
One possibility is to change LIBBPF_STRICT_ALL to only contain the bits
of all existing LIBBPF_STRICT_* flags instead of 0xffffffff. However
it's not possible because the idea is that applications compiled against
older libbpf_legacy.h would still be opting into latest
LIBBPF_STRICT_ALL features.[1]
The other possibility is to remove that check so something like
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" is allowed. It's
what this commit does.
[0]: https://lore.kernel.org/bpf/20220204220435.301896-1-mauricio@kinvolk.io/
[1]: https://lore.kernel.org/bpf/CAEf4BzaTWa9fELJLh+bxnOb0P1EMQmaRbJVG0L+nXZdy0b8G3Q@mail.gmail.com/
Fixes: 93b8952d22 ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-2-mauricio@kinvolk.io
There are cases where clang compiler is packaged in a way
readelf is a symbolic link to llvm-readelf. In such cases,
llvm-readelf will be used instead of default binutils readelf,
and the following error will appear during libbpf build:
Warning: Num of global symbols in
/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/sharedobjs/libbpf-in.o (367)
does NOT match with num of versioned symbols in
/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf.so libbpf.map (383).
Please make sure all LIBBPF_API symbols are versioned in libbpf.map.
--- /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_global_syms.tmp ...
+++ /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_versioned_syms.tmp ...
@@ -324,6 +324,22 @@
btf__str_by_offset
btf__type_by_id
btf__type_cnt
+LIBBPF_0.0.1
+LIBBPF_0.0.2
+LIBBPF_0.0.3
+LIBBPF_0.0.4
+LIBBPF_0.0.5
+LIBBPF_0.0.6
+LIBBPF_0.0.7
+LIBBPF_0.0.8
+LIBBPF_0.0.9
+LIBBPF_0.1.0
+LIBBPF_0.2.0
+LIBBPF_0.3.0
+LIBBPF_0.4.0
+LIBBPF_0.5.0
+LIBBPF_0.6.0
+LIBBPF_0.7.0
libbpf_attach_type_by_name
libbpf_find_kernel_btf
libbpf_find_vmlinux_btf_id
make[2]: *** [Makefile:184: check_abi] Error 1
make[1]: *** [Makefile:140: all] Error 2
The above failure is due to different printouts for some ABS
versioned symbols. For example, with the same libbpf.so,
$ /bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0
...
$ /opt/llvm/bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0@@LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0@@LIBBPF_0.6.0
...
The binutils readelf doesn't print out the symbol LIBBPF_* version and llvm-readelf does.
Such a difference caused libbpf build failure with llvm-readelf.
The proposed fix filters out all ABS symbols as they are not part of the comparison.
This works for both binutils readelf and llvm-readelf.
Reported-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220204214355.502108-1-yhs@fb.com
Open-code bpf_map__is_offload_neutral() logic in one place in
to-be-deprecated bpf_prog_load_xattr2.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-2-andrii@kernel.org
Open code raw_tracepoint_open and link_create used by light skeleton
to be able to avoid full libbpf eventually.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220131220528.98088-4-alexei.starovoitov@gmail.com
Open code low level bpf commands used by light skeleton to
be able to avoid full libbpf eventually.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220131220528.98088-3-alexei.starovoitov@gmail.com
Deprecate xdp_cpumap, xdp_devmap and classifier sec definitions.
Introduce xdp/devmap and xdp/cpumap definitions according to the
standard for SEC("") in libbpf:
- prog_type.prog_flags/attach_place
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/5c7bd9426b3ce6a31d9a4b1f97eb299e1467fc52.1643727185.git.lorenzo@kernel.org
btf_ext__{func,line}_info_rec_size functions are used in conjunction
with already-deprecated btf_ext__reloc_{func,line}_info functions. Since
struct btf_ext is opaque to the user it was necessary to expose rec_size
getters in the past.
btf_ext__reloc_{func,line}_info were deprecated in commit 8505e8709b
("libbpf: Implement generalized .BTF.ext func/line info adjustment")
as they're not compatible with support for multiple programs per
section. It was decided[0] that users of these APIs should implement their
own .btf.ext parsing to access this data, in which case the rec_size
getters are unnecessary. So deprecate them from libbpf 0.7.0 onwards.
[0] Closes: https://github.com/libbpf/libbpf/issues/277
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201014610.3522985-1-davemarchevsky@fb.com
Not sure why these APIs were added in the first place instead of
a completely generic (and not requiring constantly adding new APIs with
each new BPF program type) bpf_program__type() and
bpf_program__set_type() APIs. But as it is right now, there are 13 such
specialized is_type/set_type APIs, while latest kernel is already at 30+
BPF program types.
Instead of completing the set of APIs and keep chasing kernel's
bpf_prog_type enum, deprecate existing subset and recommend generic
bpf_program__type() and bpf_program__set_type() APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220124194254.2051434-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Deprecated bpf_map__resize() in favor of bpf_map__set_max_entries()
setter. In addition to having a surprising name (users often don't
realize that they need to use bpf_map__resize()), the name also implies
some magic way of resizing BPF map after it is created, which is clearly
not the case.
Another minor annoyance is that bpf_map__resize() disallows 0 value for
max_entries, which in some cases is totally acceptable (e.g., like for
BPF perf buf case to let libbpf auto-create one buffer per each
available CPU core).
[0] Closes: https://github.com/libbpf/libbpf/issues/304
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220124194254.2051434-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, rcx is read as the fourth parameter of syscall on x86_64.
But x86_64 Linux System Call convention uses r10 actually.
This commit adds the wrapper for users who want to access to
syscall params to analyze the user space.
Signed-off-by: Kenta Tada <Kenta.Tada@sony.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220124141622.4378-3-Kenta.Tada@sony.com
Deprecate bpf_object__open_buffer() API in favor of the unified
opts-based bpf_object__open_mem() API.
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220125005923.418339-2-christylee@fb.com
This adds a new bpf section "iter.s" to allow bpf iterator programs to
be sleepable.
Signed-off-by: Kenny Yu <kennyyu@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220124185403.468466-4-kennyyu@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce support for the following SEC entries for XDP frags
property:
- SEC("xdp.frags")
- SEC("xdp.frags/devmap")
- SEC("xdp.frags/cpumap")
Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/af23b6e4841c171ad1af01917839b77847a4bc27.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce 4 new netlink-based XDP APIs for attaching, detaching, and
querying XDP programs:
- bpf_xdp_attach;
- bpf_xdp_detach;
- bpf_xdp_query;
- bpf_xdp_query_id.
These APIs replace bpf_set_link_xdp_fd, bpf_set_link_xdp_fd_opts,
bpf_get_link_xdp_id, and bpf_get_link_xdp_info APIs ([0]). The latter
don't follow a consistent naming pattern and some of them use
non-extensible approaches (e.g., struct xdp_link_info which can't be
modified without breaking libbpf ABI).
The approach I took with these low-level XDP APIs is similar to what we
did with low-level TC APIs. There is a nice duality of bpf_tc_attach vs
bpf_xdp_attach, and so on. I left bpf_xdp_attach() to support detaching
when -1 is specified for prog_fd for generality and convenience, but
bpf_xdp_detach() is preferred due to clearer naming and associated
semantics. Both bpf_xdp_attach() and bpf_xdp_detach() accept the same
opts struct allowing to specify expected old_prog_fd.
While doing the refactoring, I noticed that old APIs require users to
specify opts with old_fd == -1 to declare "don't care about already
attached XDP prog fd" condition. Otherwise, FD 0 is assumed, which is
essentially never an intended behavior. So I made this behavior
consistent with other kernel and libbpf APIs, in which zero FD means "no
FD". This seems to be more in line with the latest thinking in BPF land
and should cause less user confusion, hopefully.
For querying, I left two APIs, both more generic bpf_xdp_query()
allowing to query multiple IDs and attach mode, but also
a specialization of it, bpf_xdp_query_id(), which returns only requested
prog_id. Uses of prog_id returning bpf_get_link_xdp_id() were so
prevalent across selftests and samples, that it seemed a very common use
case and using bpf_xdp_query() for doing it felt very cumbersome with
a highly branches if/else chain based on flags and attach mode.
Old APIs are scheduled for deprecation in libbpf 0.8 release.
[0] Closes: https://github.com/libbpf/libbpf/issues/309
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220120061422.2710637-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enact deprecation of legacy BPF map definition in SEC("maps") ([0]). For
the definitions themselves introduce LIBBPF_STRICT_MAP_DEFINITIONS flag
for libbpf strict mode. If it is set, error out on any struct
bpf_map_def-based map definition. If not set, libbpf will print out
a warning for each legacy BPF map to raise awareness that it goes away.
For any use of BPF_ANNOTATE_KV_PAIR() macro providing a legacy way to
associate BTF key/value type information with legacy BPF map definition,
warn through libbpf's pr_warn() error message (but don't fail BPF object
open).
BPF-side struct bpf_map_def is marked as deprecated. User-space struct
bpf_map_def has to be used internally in libbpf, so it is left
untouched. It should be enough for bpf_map__def() to be marked
deprecated to raise awareness that it goes away.
bpftool is an interesting case that utilizes libbpf to open BPF ELF
object to generate skeleton. As such, even though bpftool itself uses
full on strict libbpf mode (LIBBPF_STRICT_ALL), it has to relax it a bit
for BPF map definition handling to minimize unnecessary disruptions. So
opt-out of LIBBPF_STRICT_MAP_DEFINITIONS for bpftool. User's code that
will later use generated skeleton will make its own decision whether to
enforce LIBBPF_STRICT_MAP_DEFINITIONS or not.
There are few tests in selftests/bpf that are consciously using legacy
BPF map definitions to test libbpf functionality. For those, temporary
opt out of LIBBPF_STRICT_MAP_DEFINITIONS mode for the duration of those
tests.
[0] Closes: https://github.com/libbpf/libbpf/issues/272
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220120060529.1890907-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a hashmap to map the string offsets from a source btf to the
string offsets from a target btf to reduce overheads.
btf__add_btf() calls btf__add_str() to add strings from a source to a
target btf. It causes many string comparisons, and it is a major
hotspot when adding a big btf. btf__add_str() uses strcmp() to check
if a hash entry is the right one. The extra hashmap here compares
offsets of strings, that are much cheaper. It remembers the results
of btf__add_str() for later uses to reduce the cost.
We are parallelizing BTF encoding for pahole by creating separated btf
instances for worker threads. These per-thread btf instances will be
added to the btf instance of the main thread by calling btf__add_str()
to deduplicate and write out. With this patch and -j4, the running
time of pahole drops to about 6.0s from 6.6s.
The following lines are the summary of 'perf stat' w/o the change.
6.668126396 seconds time elapsed
13.451054000 seconds user
0.715520000 seconds sys
The following lines are the summary w/ the change.
5.986973919 seconds time elapsed
12.939903000 seconds user
0.724152000 seconds sys
V4 fixes a bug of error checking against the pointer returned by
hashmap__new().
[v3] https://lore.kernel.org/bpf/20220118232053.2113139-1-kuifeng@fb.com/
[v2] https://lore.kernel.org/bpf/20220114193713.461349-1-kuifeng@fb.com/
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220119180214.255634-1-kuifeng@fb.com
The btf.h header included with libbpf contains inline helper functions to
check for various BTF kinds. These helpers directly reference the
BTF_KIND_* constants defined in the kernel header, and because the header
file is included in user applications, this happens in the user application
compile units.
This presents a problem if a user application is compiled on a system with
older kernel headers because the constants are not available. To avoid
this, add #defines of the constants directly in btf.h before using them.
Since the kernel header moved to an enum for BTF_KIND_*, the #defines can
shadow the enum values without any errors, so we only need #ifndef guards
for the constants that predates the conversion to enum. We group these so
there's only one guard for groups of values that were added together.
[0] Closes: https://github.com/libbpf/libbpf/issues/436
Fixes: 223f903e9c ("bpf: Rename BTF_KIND_TAG to BTF_KIND_DECL_TAG")
Fixes: 5b84bd1036 ("libbpf: Add support for BTF_KIND_TAG")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20220118141327.34231-1-toke@redhat.com
All fields accessed via bpf_map_def can now be accessed via
appropirate getters and setters. Mark bpf_map__def() API as deprecated.
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108004218.355761-6-christylee@fb.com
When I checked the code in skeleton header file generated with my own
bpf prog, I found there may be possible NULL pointer dereference when
destroying skeleton. Then I checked the in-tree bpf progs, finding that is
a common issue. Let's take the generated samples/bpf/xdp_redirect_cpu.skel.h
for example. Below is the generated code in
xdp_redirect_cpu__create_skeleton():
xdp_redirect_cpu__create_skeleton
struct bpf_object_skeleton *s;
s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));
if (!s)
goto error;
...
error:
bpf_object__destroy_skeleton(s);
return -ENOMEM;
After goto error, the NULL 's' will be deferenced in
bpf_object__destroy_skeleton().
We can simply fix this issue by just adding a NULL check in
bpf_object__destroy_skeleton().
Fixes: d66562fba1 ("libbpf: Add BPF object skeleton support")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108134739.32541-1-laoar.shao@gmail.com
All xattr APIs are being dropped, let's converge to the convention used in
high-level APIs and rename bpf_prog_attach_xattr to bpf_prog_attach_opts.
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220107184604.3668544-2-christylee@fb.com
hashmap__new() uses ERR_PTR() to return an error so it's better to
use IS_ERR_OR_NULL() in order to check the pointer before calling
free(). This will prevent freeing an invalid pointer if somebody calls
hashmap__free() with the result of a failed hashmap__new() call.
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220107152620.192327-1-mauricio@kinvolk.io
This adds documention for:
- bpf_map_delete_batch()
- bpf_map_lookup_batch()
- bpf_map_lookup_and_delete_batch()
- bpf_map_update_batch()
This also updates the public API for the `keys` parameter
of `bpf_map_delete_batch()`, and both the
`keys` and `values` parameters of `bpf_map_update_batch()`
to be constants.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220106201304.112675-1-grantseltzer@gmail.com
If repeated legacy kprobes on same function in one process,
libbpf will register using the same probe name and got -EBUSY
error. So append index to the probe name format to fix this
problem.
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Qiang Wang <wangqiang.wq.frank@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211227130713.66933-2-wangqiang.wq.frank@bytedance.com
With perf_buffer__poll() and perf_buffer__consume() APIs available,
there is no reason to expose bpf_perf_event_read_simple() API to
users. If users need custom perf buffer, they could re-implement
the function.
Mark bpf_perf_event_read_simple() and move the logic to a new
static function so it can still be called by other functions in the
same file.
[0] Closes: https://github.com/libbpf/libbpf/issues/310
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211229204156.13569-1-christylee@fb.com
Ubuntu reports incorrect kernel version through uname(), which on older
kernels leads to kprobe BPF programs failing to load due to the version
check mismatch.
Accommodate Ubuntu's quirks with LINUX_VERSION_CODE by using
Ubuntu-specific /proc/version_code to fetch major/minor/patch versions
to form LINUX_VERSION_CODE.
While at it, consolide libbpf's kernel version detection code between
libbpf.c and libbpf_probes.c.
[0] Closes: https://github.com/libbpf/libbpf/issues/421
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211222231003.2334940-1-andrii@kernel.org
Improve bpf_tracing.h's macro definition readability by keeping them
single-line and better aligned. This makes it easier to follow all those
variadic patterns.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211222213924.1869758-2-andrii@kernel.org
Refactor PT_REGS macros definitions in bpf_tracing.h to avoid excessive
duplication. We currently have classic PT_REGS_xxx() and CO-RE-enabled
PT_REGS_xxx_CORE(). We are about to add also _SYSCALL variants, which
would require excessive copying of all the per-architecture definitions.
Instead, separate architecture-specific field/register names from the
final macro that utilize them. That way for upcoming _SYSCALL variants
we'll be able to just define x86_64 exception and otherwise have one
common set of _SYSCALL macro definitions common for all architectures.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20211222213924.1869758-1-andrii@kernel.org
Create three extensible alternatives to inconsistently named
feature-probing APIs:
- libbpf_probe_bpf_prog_type() instead of bpf_probe_prog_type();
- libbpf_probe_bpf_map_type() instead of bpf_probe_map_type();
- libbpf_probe_bpf_helper() instead of bpf_probe_helper().
Set up return values such that libbpf can report errors (e.g., if some
combination of input arguments isn't possible to validate, etc), in
addition to whether the feature is supported (return value 1) or not
supported (return value 0).
Also schedule deprecation of those three APIs. Also schedule deprecation
of bpf_probe_large_insn_limit().
Also fix all the existing detection logic for various program and map
types that never worked:
- BPF_PROG_TYPE_LIRC_MODE2;
- BPF_PROG_TYPE_TRACING;
- BPF_PROG_TYPE_LSM;
- BPF_PROG_TYPE_EXT;
- BPF_PROG_TYPE_SYSCALL;
- BPF_PROG_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_STRUCT_OPS;
- BPF_MAP_TYPE_BLOOM_FILTER.
Above prog/map types needed special setups and detection logic to work.
Subsequent patch adds selftests that will make sure that all the
detection logic keeps working for all current and future program and map
types, avoiding otherwise inevitable bit rot.
[0] Closes: https://github.com/libbpf/libbpf/issues/312
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20211217171202.3352835-2-andrii@kernel.org
Cross-building using clang requires passing the "-target" flag rather
than using the CROSS_COMPILE prefix. Makefile.include transforms
CROSS_COMPILE into CLANG_CROSS_FLAGS. Add them to the CFLAGS.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211216163842.829836-4-jean-philippe@linaro.org
Fix possible read beyond ELF "license" data section if the license
string is not properly zero-terminated. Use the fact that libbpf_strlcpy
never accesses the (N-1)st byte of the source string because it's
replaced with '\0' anyways.
If this happens, it's a violation of contract between libbpf and a user,
but not handling this more robustly upsets CIFuzz, so given the fix is
trivial, let's fix the potential issue.
Fixes: 9fc205b413 ("libbpf: Add sane strncpy alternative and use it internally")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211214232054.3458774-1-andrii@kernel.org
The need to increase RLIMIT_MEMLOCK to do anything useful with BPF is
one of the first extremely frustrating gotchas that all new BPF users go
through and in some cases have to learn it a very hard way.
Luckily, starting with upstream Linux kernel version 5.11, BPF subsystem
dropped the dependency on memlock and uses memcg-based memory accounting
instead. Unfortunately, detecting memcg-based BPF memory accounting is
far from trivial (as can be evidenced by this patch), so in practice
most BPF applications still do unconditional RLIMIT_MEMLOCK increase.
As we move towards libbpf 1.0, it would be good to allow users to forget
about RLIMIT_MEMLOCK vs memcg and let libbpf do the sensible adjustment
automatically. This patch paves the way forward in this matter. Libbpf
will do feature detection of memcg-based accounting, and if detected,
will do nothing. But if the kernel is too old, just like BCC, libbpf
will automatically increase RLIMIT_MEMLOCK on behalf of user
application ([0]).
As this is technically a breaking change, during the transition period
applications have to opt into libbpf 1.0 mode by setting
LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK bit when calling
libbpf_set_strict_mode().
Libbpf allows to control the exact amount of set RLIMIT_MEMLOCK limit
with libbpf_set_memlock_rlim_max() API. Passing 0 will make libbpf do
nothing with RLIMIT_MEMLOCK. libbpf_set_memlock_rlim_max() has to be
called before the first bpf_prog_load(), bpf_btf_load(), or
bpf_object__load() call, otherwise it has no effect and will return
-EBUSY.
[0] Closes: https://github.com/libbpf/libbpf/issues/369
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214195904.1785155-2-andrii@kernel.org
strncpy() has a notoriously error-prone semantics which makes GCC
complain about it a lot (and quite often completely completely falsely
at that). Instead of pleasing GCC all the time (-Wno-stringop-truncation
is unfortunately only supported by GCC, so it's a bit too messy to just
enable it in Makefile), add libbpf-internal libbpf_strlcpy() helper
which follows what FreeBSD's strlcpy() does and what most people would
expect from strncpy(): copies up to N-1 first bytes from source string
into destination string and ensures zero-termination afterwards.
Replace all the relevant uses of strncpy/strncat/memcpy in libbpf with
libbpf_strlcpy().
This also fixes the issue reported by Emmanuel Deloget in xsk.c where
memcpy() could access source string beyond its end.
Fixes: 2f6324a393 (libbpf: Support shared umems between queues and devices)
Reported-by: Emmanuel Deloget <emmanuel.deloget@eho.link>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211211004043.2374068-1-andrii@kernel.org
In case of BPF_CORE_TYPE_ID_LOCAL we fill out target result explicitly.
But targ_res itself isn't initialized in such a case, and subsequent
call to bpf_core_patch_insn() might read uninitialized field (like
fail_memsz_adjust in this case). So ensure that targ_res is
zero-initialized for BPF_CORE_TYPE_ID_LOCAL case.
This was reported by Coverity static analyzer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214010032.3843804-1-andrii@kernel.org
During linking, type IDs in the resulting linked BPF object file can
change, and so ldimm64 instructions corresponding to
BPF_CORE_TYPE_ID_TARGET and BPF_CORE_TYPE_ID_LOCAL CO-RE relos can get
their imm value out of sync with actual CO-RE relocation information
that's updated by BPF linker properly during linking process.
We could teach BPF linker to adjust such instructions, but it feels
a bit too much for linker to re-implement good chunk of
bpf_core_patch_insns logic just for this. This is a redundant safety
check for TYPE_ID relocations, as the real validation is in matching
CO-RE specs, so if that works fine, it's very unlikely that there is
something wrong with the instruction itself.
So, instead, teach libbpf (and kernel) to ignore insn->imm for
BPF_CORE_TYPE_ID_TARGET and BPF_CORE_TYPE_ID_LOCAL relos.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211213010706.100231-1-andrii@kernel.org
libbpf's obj->nr_programs includes static and global functions. That number
could be higher than the actual number of bpf programs going be loaded by
gen_loader. Passing larger nr_programs to bpf_gen__init() doesn't hurt. Those
exra stack slots will stay as zero. bpf_gen__finish() needs to check that
actual number of progs that gen_loader saw is less than or equal to
obj->nr_programs.
Fixes: ba05fd36b8 ("libbpf: Perform map fd cleanup for gen_loader in case of error")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix error: "failed to pin map: Bad file descriptor, path:
/sys/fs/bpf/_rodata_str1_1."
In the old kernel, the global data map will not be created, see [0]. So
we should skip the pinning of the global data map to avoid
bpf_object__pin_maps returning error. Therefore, when the map is not
created, we mark “map->skipped" as true and then check during relocation
and during pinning.
Fixes: 16e0c35c6f ("libbpf: Load global data maps lazily on legacy kernels")
Signed-off-by: Shuyi Cheng <chengshuyi@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The btf__dedup_deprecated name was misspelled in the definition of the
compat symbol for btf__dedup. This leads it to be missing from the
shared library.
This fixes it.
Fixes: 957d350a8b ("libbpf: Turn btf_dedup_opts into OPTS-based struct")
Signed-off-by: Vincent Minet <vincent@vincent-minet.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211210063112.80047-1-vincent@vincent-minet.net
Deprecate non-extensible bpf_object__load_xattr() in v0.8 ([0]).
With log_level control through bpf_object_open_opts or
bpf_program__set_log_level(), we are finally at the point where
bpf_object__load_xattr() doesn't provide any functionality that can't be
accessed through other (better) ways. The other feature,
target_btf_path, is also controllable through bpf_object_open_opts.
[0] Closes: https://github.com/libbpf/libbpf/issues/289
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-9-andrii@kernel.org
Allow to set user-provided log buffer on a per-program basis ([0]). This
gives great deal of flexibility in terms of which programs are loaded
with logging enabled and where corresponding logs go.
Log buffer set with bpf_program__set_log_buf() overrides kernel_log_buf
and kernel_log_size settings set at bpf_object open time through
bpf_object_open_opts, if any.
Adjust bpf_object_load_prog_instance() logic to not perform own log buf
allocation and load retry if custom log buffer is provided by the user.
[0] Closes: https://github.com/libbpf/libbpf/issues/418
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-8-andrii@kernel.org
Instead of rewriting error code returned by the kernel of prog load with
libbpf-sepcific variants pass through the original error.
There is now also no need to have a backup generic -LIBBPF_ERRNO__LOAD
fallback error as bpf_prog_load() guarantees that errno will be properly
set no matter what.
Also drop a completely outdated and pretty useless BPF_PROG_TYPE_KPROBE
guess logic. It's not necessary and neither it's helpful in modern BPF
applications.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-7-andrii@kernel.org
Add missing "prog '%s': " prefixes in few places and use consistently
markers for beginning and end of program load logs. Here's an example of
log output:
libbpf: prog 'handler': BPF program load failed: Permission denied
libbpf: -- BEGIN PROG LOAD LOG ---
arg#0 reference type('UNKNOWN ') size cannot be determined: -22
; out1 = in1;
0: (18) r1 = 0xffffc9000cdcc000
2: (61) r1 = *(u32 *)(r1 +0)
...
81: (63) *(u32 *)(r4 +0) = r5
R1_w=map_value(id=0,off=16,ks=4,vs=20,imm=0) R4=map_value(id=0,off=400,ks=4,vs=16,imm=0)
invalid access to map value, value_size=16 off=400 size=4
R4 min value is outside of the allowed memory range
processed 63 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
libbpf: failed to load program 'handler'
libbpf: failed to load object 'test_skeleton'
The entire verifier log, including BEGIN and END markers are now always
youtput during a single print callback call. This should make it much
easier to post-process or parse it, if necessary. It's not an explicit
API guarantee, but it can be reasonably expected to stay like that.
Also __bpf_object__open is renamed to bpf_object_open() as it's always
an adventure to find the exact function that implements bpf_object's
open phase, so drop the double underscored and use internal libbpf
naming convention.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-6-andrii@kernel.org
Allow users to provide their own custom log_buf, log_size, and log_level
at bpf_object level through bpf_object_open_opts. This log_buf will be
used during BTF loading. Subsequent patch will use same log_buf during
BPF program loading, unless overriden at per-bpf_program level.
When such custom log_buf is provided, libbpf won't be attempting
retrying loading of BTF to try to provide its own log buffer to capture
kernel's error log output. User is responsible to provide big enough
buffer, otherwise they run a risk of getting -ENOSPC error from the
bpf() syscall.
See also comments in bpf_object_open_opts regarding log_level and
log_buf interactions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-5-andrii@kernel.org
Add libbpf-internal btf_load_into_kernel() that allows to pass
preallocated log_buf and custom log_level to be passed into kernel
during BPF_BTF_LOAD call. When custom log_buf is provided,
btf_load_into_kernel() won't attempt an retry with automatically
allocated internal temporary buffer to capture BTF validation log.
It's important to note the relation between log_buf and log_level, which
slightly deviates from stricter kernel logic. From kernel's POV, if
log_buf is specified, log_level has to be > 0, and vice versa. While
kernel has good reasons to request such "sanity, this, in practice, is
a bit unconvenient and restrictive for libbpf's high-level bpf_object APIs.
So libbpf will allow to set non-NULL log_buf and log_level == 0. This is
fine and means to attempt to load BTF without logging requested, but if
it failes, retry the load with custom log_buf and log_level 1. Similar
logic will be implemented for program loading. In practice this means
that users can provide custom log buffer just in case error happens, but
not really request slower verbose logging all the time. This is also
consistent with libbpf behavior when custom log_buf is not set: libbpf
first tries to load everything with log_level=0, and only if error
happens allocates internal log buffer and retries with log_level=1.
Also, while at it, make BTF validation log more obvious and follow the log
pattern libbpf is using for dumping BPF verifier log during
BPF_PROG_LOAD. BTF loading resulting in an error will look like this:
libbpf: BTF loading error: -22
libbpf: -- BEGIN BTF LOAD LOG ---
magic: 0xeb9f
version: 1
flags: 0x0
hdr_len: 24
type_off: 0
type_len: 1040
str_off: 1040
str_len: 2063598257
btf_total_size: 1753
Total section length too long
-- END BTF LOAD LOG --
libbpf: Error loading .BTF into kernel: -22. BTF is optional, ignoring.
This makes it much easier to find relevant parts in libbpf log output.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-4-andrii@kernel.org
Similar to previous bpf_prog_load() and bpf_map_create() APIs, add
bpf_btf_load() API which is taking optional OPTS struct. Schedule
bpf_load_btf() for deprecation in v0.8 ([0]).
This makes naming consistent with BPF_BTF_LOAD command, sets up an API
for extensibility in the future, moves options parameters (log-related
fields) into optional options, and also allows to pass log_level
directly.
It also removes log buffer auto-allocation logic from low-level API
(consistent with bpf_prog_load() behavior), but preserves a special
treatment of log_level == 0 with non-NULL log_buf, which matches
low-level bpf_prog_load() and high-level libbpf APIs for BTF and program
loading behaviors.
[0] Closes: https://github.com/libbpf/libbpf/issues/419
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-3-andrii@kernel.org
To unify libbpf APIs behavior w.r.t. log_buf and log_level, fix
bpf_prog_load() to follow the same logic as bpf_btf_load() and
high-level bpf_object__load() API will follow in the subsequent patches:
- if log_level is 0 and non-NULL log_buf is provided by a user, attempt
load operation initially with no log_buf and log_level set;
- if successful, we are done, return new FD;
- on error, retry the load operation with log_level bumped to 1 and
log_buf set; this way verbose logging will be requested only when we
are sure that there is a failure, but will be fast in the
common/expected success case.
Of course, user can still specify log_level > 0 from the very beginning
to force log collection.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-2-andrii@kernel.org
This adds comments above functions in libbpf.h which document
their uses. These comments are of a format that doxygen and sphinx
can pick up and render. These are rendered by libbpf.readthedocs.org
These doc comments are for:
- bpf_object__open_file()
- bpf_object__open_mem()
- bpf_program__attach_uprobe()
- bpf_program__attach_uprobe_opts()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211206203709.332530-1-grantseltzer@gmail.com
bpf_prog_load_xattr() is high-level API that's named as a low-level
BPF_PROG_LOAD wrapper APIs, but it actually operates on struct
bpf_object. It's badly and confusingly misnamed as it will load all the
progs insige bpf_object, returning prog_fd of the very first BPF
program. It also has a bunch of ad-hoc things like log_level override,
map_ifindex auto-setting, etc. All this can be expressed more explicitly
and cleanly through existing libbpf APIs. This patch marks
bpf_prog_load_xattr() for deprecation in libbpf v0.8 ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/308
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211201232824.3166325-10-andrii@kernel.org
Add bpf_program__set_log_level() and bpf_program__log_level() to fetch
and adjust log_level sent during BPF_PROG_LOAD command. This allows to
selectively request more or less verbose output in BPF verifier log.
Also bump libbpf version to 0.7 and make these APIs the first in v0.7.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211201232824.3166325-3-andrii@kernel.org
The gen_loader has to clear attach_kind otherwise the programs
without attach_btf_id will fail load if they follow programs
with attach_btf_id.
Fixes: 6723474373 ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-12-alexei.starovoitov@gmail.com
Without lskel the CO-RE relocations are processed by libbpf before any other
work is done. Instead, when lskel is needed, remember relocation as RELO_CORE
kind. Then when loader prog is generated for a given bpf program pass CO-RE
relos of that program to gen loader via bpf_gen__record_relo_core(). The gen
loader will remember them as-is and pass it later as-is into the kernel.
The normal libbpf flow is to process CO-RE early before call relos happen. In
case of gen_loader the core relos have to be added to other relos to be copied
together when bpf static function is appended in different places to other main
bpf progs. During the copy the append_subprog_relos() will adjust insn_idx for
normal relos and for RELO_CORE kind too. When that is done each struct
reloc_desc has good relos for specific main prog.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-10-alexei.starovoitov@gmail.com
struct bpf_core_relo is generated by llvm and processed by libbpf.
It's a de-facto uapi.
With CO-RE in the kernel the struct bpf_core_relo becomes uapi de-jure.
Add an ability to pass a set of 'struct bpf_core_relo' to prog_load command
and let the kernel perform CO-RE relocations.
Note the struct bpf_line_info and struct bpf_func_info have the same
layout when passed from LLVM to libbpf and from libbpf to the kernel
except "insn_off" fields means "byte offset" when LLVM generates it.
Then libbpf converts it to "insn index" to pass to the kernel.
The struct bpf_core_relo's "insn_off" field is always "byte offset".
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-6-alexei.starovoitov@gmail.com
enum bpf_core_relo_kind is generated by llvm and processed by libbpf.
It's a de-facto uapi.
With CO-RE in the kernel the bpf_core_relo_kind values become uapi de-jure.
Also rename them with BPF_CORE_ prefix to distinguish from conflicting names in
bpf_core_read.h. The enums bpf_field_info_kind, bpf_type_id_kind,
bpf_type_info_kind, bpf_enum_value_kind are passing different values from bpf
program into llvm.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-5-alexei.starovoitov@gmail.com
Make relo_core.c to be compiled for the kernel and for user space libbpf.
Note the patch is reducing BPF_CORE_SPEC_MAX_LEN from 64 to 32.
This is the maximum number of nested structs and arrays.
For example:
struct sample {
int a;
struct {
int b[10];
};
};
struct sample *s = ...;
int *y = &s->b[5];
This field access is encoded as "0:1:0:5" and spec len is 4.
The follow up patch might bump it back to 64.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-4-alexei.starovoitov@gmail.com
To prepare relo_core.c to be compiled in the kernel and the user space
replace btf__type_by_id with btf_type_by_id.
In libbpf btf__type_by_id and btf_type_by_id have different behavior.
bpf_core_apply_relo_insn() needs behavior of uapi btf__type_by_id
vs internal btf_type_by_id, but type_id range check is already done
in bpf_core_apply_relo(), so it's safe to replace it everywhere.
The kernel btf_type_by_id() does the check anyway. It doesn't hurt.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-2-alexei.starovoitov@gmail.com
Alexei pointed out that we can use BPF_REG_0 which already contains imm
from move_blob2blob computation. Note that we now compare the second
insn's imm, but this should not matter, since both will be zeroed out
for the error case for the insn populated earlier.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122235733.634914-4-memxor@gmail.com
Instead, jump directly to success case stores in case ret >= 0, else do
the default 0 value store and jump over the success case. This is better
in terms of readability. Readjust the code for kfunc relocation as well
to follow a similar pattern, also leads to easier to follow code now.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122235733.634914-3-memxor@gmail.com
When compiling libbpf with gcc 4.8.5, we see:
CC staticobjs/btf_dump.o
btf_dump.c: In function ‘btf_dump_dump_type_data.isra.24’:
btf_dump.c:2296:5: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (err < 0)
^
cc1: all warnings being treated as errors
make: *** [staticobjs/btf_dump.o] Error 1
While gcc 4.8.5 is too old to build the upstream kernel, it's possible it
could be used to build standalone libbpf which suffers from the same problem.
Silence the error by initializing 'err' to 0. The warning/error seems to be
a false positive since err is set early in the function. Regardless we
shouldn't prevent libbpf from building for this.
Fixes: 920d16af9b ("libbpf: BTF dumper support for typed data")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1638180040-8037-1-git-send-email-alan.maguire@oracle.com
Add the __NR_bpf definitions to fix the following build errors for mips:
$ cd tools/bpf/bpftool
$ make
[...]
bpf.c:54:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^~~~~
bpf.c: In function ‘sys_bpf’:
bpf.c:66:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
return syscall(__NR_bpf, cmd, attr, size);
^~~~~~~~
__NR_brk
[...]
In file included from gen_loader.c:15:0:
skel_internal.h: In function ‘skel_sys_bpf’:
skel_internal.h:53:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
return syscall(__NR_bpf, cmd, attr, size);
^~~~~~~~
__NR_brk
We can see the following generated definitions:
$ grep -r "#define __NR_bpf" arch/mips
arch/mips/include/generated/uapi/asm/unistd_o32.h:#define __NR_bpf (__NR_Linux + 355)
arch/mips/include/generated/uapi/asm/unistd_n64.h:#define __NR_bpf (__NR_Linux + 315)
arch/mips/include/generated/uapi/asm/unistd_n32.h:#define __NR_bpf (__NR_Linux + 319)
The __NR_Linux is defined in arch/mips/include/uapi/asm/unistd.h:
$ grep -r "#define __NR_Linux" arch/mips
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 4000
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 5000
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 6000
That is to say, __NR_bpf is:
4000 + 355 = 4355 for mips o32,
6000 + 319 = 6319 for mips n32,
5000 + 315 = 5315 for mips n64.
So use the GCC pre-defined macro _ABIO32, _ABIN32 and _ABI64 [1] to define
the corresponding __NR_bpf.
This patch is similar with commit bad1926dd2 ("bpf, s390: fix build for
libbpf and selftest suite").
[1] https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/config/mips/mips.h#l549
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1637804167-8323-1-git-send-email-yangtiezhu@loongson.cn
add_dst_sec() can invalidate bpf_linker's section index making
dst_symtab pointer pointing into unallocated memory. Reinitialize
dst_symtab pointer on each iteration to make sure it's always valid.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-7-andrii@kernel.org
Sanitizer complains about qsort(), bsearch(), and memcpy() being called
with NULL pointer. This can only happen when the associated number of
elements is zero, so no harm should be done. But still prevent this from
happening to keep sanitizer runs clean from extra noise.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-5-andrii@kernel.org
Perform a memory copy before we do the sanity checks of btf_ext_hdr.
This prevents misaligned memory access if raw btf_ext data is not 4-byte
aligned ([0]).
While at it, also add missing const qualifier.
[0] Closes: https://github.com/libbpf/libbpf/issues/391
Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-3-andrii@kernel.org
xsk.c is using own APIs that are marked for deprecation internally.
Given xsk.c and xsk.h will be gone in libbpf 1.0, there is no reason to
do public vs internal function split just to avoid deprecation warnings.
So just add a pragma to silence deprecation warnings (until the code is
removed completely).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124193233.3115996-4-andrii@kernel.org
Mark the entire zoo of low-level map creation APIs for deprecation in
libbpf 0.7 ([0]) and introduce a new bpf_map_create() API that is
OPTS-based (and thus future-proof) and matches the BPF_MAP_CREATE
command name.
While at it, ensure that gen_loader sends map_extra field. Also remove
now unneeded btf_key_type_id/btf_value_type_id logic that libbpf is
doing anyways.
[0] Closes: https://github.com/libbpf/libbpf/issues/282
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124193233.3115996-2-andrii@kernel.org
Load global data maps lazily, if kernel is too old to support global
data. Make sure that programs are still correct by detecting if any of
the to-be-loaded programs have relocation against any of such maps.
This allows to solve the issue ([0]) with bpf_printk() and Clang
generating unnecessary and unreferenced .rodata.strX.Y sections, but it
also goes further along the CO-RE lines, allowing to have a BPF object
in which some code can work on very old kernels and relies only on BPF
maps explicitly, while other BPF programs might enjoy global variable
support. If such programs are correctly set to not load at runtime on
old kernels, bpf_object will load and function correctly now.
[0] https://lore.kernel.org/bpf/CAK-59YFPU3qO+_pXWOH+c1LSA=8WA1yabJZfREjOEXNHAqgXNg@mail.gmail.com/
Fixes: aed659170a ("libbpf: Support multiple .rodata.* and .data.* BPF maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211123200105.387855-1-andrii@kernel.org
bpf_program__set_extra_flags has just been introduced so we can still
change it without breaking users.
This new interface is a bit more flexible (for example if someone wants
to clear a flag).
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211119180035.1396139-1-revest@chromium.org
According to [0], compilers sometimes might produce duplicate DWARF
definitions for exactly the same struct/union within the same
compilation unit (CU). We've had similar issues with identical arrays
and handled them with a similar workaround in 6b6e6b1d09 ("libbpf:
Accomodate DWARF/compiler bug with duplicated identical arrays"). Do the
same for struct/union by ensuring that two structs/unions are exactly
the same, down to the integer values of field referenced type IDs.
Solving this more generically (allowing referenced types to be
equivalent, but using different type IDs, all within a single CU)
requires a huge complexity increase to handle many-to-many mappings
between canonidal and candidate type graphs. Before we invest in that,
let's see if this approach handles all the instances of this issue in
practice. Thankfully it's pretty rare, it seems.
[0] https://lore.kernel.org/bpf/YXr2NFlJTAhHdZqq@krava/
Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211117194114.347675-1-andrii@kernel.org
Libbpf provided LIBBPF_MAJOR_VERSION and LIBBPF_MINOR_VERSION macros to
check libbpf version at compilation time. This doesn't cover all the
needs, though, because version of libbpf that application is compiled
against doesn't necessarily match the version of libbpf at runtime,
especially if libbpf is used as a shared library.
Add libbpf_major_version() and libbpf_minor_version() returning major
and minor versions, respectively, as integers. Also add a convenience
libbpf_version_string() for various tooling using libbpf to print out
libbpf version in a human-readable form. Currently it will return
"v0.6", but in the future it can contains some extra information, so the
format itself is not part of a stable API and shouldn't be relied upon.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20211118174054.2699477-1-andrii@kernel.org
Commit 2dc1e488e5 ("libbpf: Support BTF_KIND_TYPE_TAG") added the
BTF_KIND_TYPE_TAG support. But to test vmlinux build with ...
#define __user __attribute__((btf_type_tag("user")))
... I needed to sync libbpf repo and manually copy libbpf sources to
pahole. To simplify process, I used BTF_KIND_RESTRICT to simulate the
BTF_KIND_TYPE_TAG with vmlinux build as "restrict" modifier is barely
used in kernel.
But this approach missed one case in dedup with structures where
BTF_KIND_RESTRICT is handled and BTF_KIND_TYPE_TAG is not handled in
btf_dedup_is_equiv(), and this will result in a pahole dedup failure.
This patch fixed this issue and a selftest is added in the subsequent
patch to test this scenario.
The other missed handling is in btf__resolve_size(). Currently the compiler
always emit like PTR->TYPE_TAG->... so in practice we don't hit the missing
BTF_KIND_TYPE_TAG handling issue with compiler generated code. But lets
add case BTF_KIND_TYPE_TAG in the switch statement to be future proof.
Fixes: 2dc1e488e5 ("libbpf: Support BTF_KIND_TYPE_TAG")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211115163937.3922235-1-yhs@fb.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-11-15
We've added 72 non-merge commits during the last 13 day(s) which contain
a total of 171 files changed, 2728 insertions(+), 1143 deletions(-).
The main changes are:
1) Add btf_type_tag attributes to bring kernel annotations like __user/__rcu to
BTF such that BPF verifier will be able to detect misuse, from Yonghong Song.
2) Big batch of libbpf improvements including various fixes, future proofing APIs,
and adding a unified, OPTS-based bpf_prog_load() low-level API, from Andrii Nakryiko.
3) Add ingress_ifindex to BPF_SK_LOOKUP program type for selectively applying the
programmable socket lookup logic to packets from a given netdev, from Mark Pashmfouroush.
4) Remove the 128M upper JIT limit for BPF programs on arm64 and add selftest to
ensure exception handling still works, from Russell King and Alan Maguire.
5) Add a new bpf_find_vma() helper for tracing to map an address to the backing
file such as shared library, from Song Liu.
6) Batch of various misc fixes to bpftool, fixing a memory leak in BPF program dump,
updating documentation and bash-completion among others, from Quentin Monnet.
7) Deprecate libbpf bpf_program__get_prog_info_linear() API and migrate its users as
the API is heavily tailored around perf and is non-generic, from Dave Marchevsky.
8) Enable libbpf's strict mode by default in bpftool and add a --legacy option as an
opt-out for more relaxed BPF program requirements, from Stanislav Fomichev.
9) Fix bpftool to use libbpf_get_error() to check for errors, from Hengqi Chen.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpftool: Use libbpf_get_error() to check error
bpftool: Fix mixed indentation in documentation
bpftool: Update the lists of names for maps and prog-attach types
bpftool: Fix indent in option lists in the documentation
bpftool: Remove inclusion of utilities.mak from Makefiles
bpftool: Fix memory leak in prog_dump()
selftests/bpf: Fix a tautological-constant-out-of-range-compare compiler warning
selftests/bpf: Fix an unused-but-set-variable compiler warning
bpf: Introduce btf_tracing_ids
bpf: Extend BTF_ID_LIST_GLOBAL with parameter for number of IDs
bpftool: Enable libbpf's strict mode by default
docs/bpf: Update documentation for BTF_KIND_TYPE_TAG support
selftests/bpf: Clarify llvm dependency with btf_tag selftest
selftests/bpf: Add a C test for btf_type_tag
selftests/bpf: Rename progs/tag.c to progs/btf_decl_tag.c
selftests/bpf: Test BTF_KIND_DECL_TAG for deduplication
selftests/bpf: Add BTF_KIND_TYPE_TAG unit tests
selftests/bpf: Test libbpf API function btf__add_type_tag()
bpftool: Support BTF_KIND_TYPE_TAG
libbpf: Support BTF_KIND_TYPE_TAG
...
====================
Link: https://lore.kernel.org/r/20211115162008.25916-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf3 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
Add new variants of perf_buffer__new() and perf_buffer__new_raw() that
use OPTS-based options for future extensibility ([0]). Given all the
currently used API names are best fits, re-use them and use
___libbpf_override() approach and symbol versioning to preserve ABI and
source code compatibility. struct perf_buffer_opts and struct
perf_buffer_raw_opts are kept as well, but they are restructured such
that they are OPTS-based when used with new APIs. For struct
perf_buffer_raw_opts we keep few fields intact, so we have to also
preserve the memory location of them both when used as OPTS and for
legacy API variants. This is achieved with anonymous padding for OPTS
"incarnation" of the struct. These pads can be eventually used for new
options.
[0] Closes: https://github.com/libbpf/libbpf/issues/311
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111053624.190580-6-andrii@kernel.org
Change btf_dump__new() and corresponding struct btf_dump_ops structure
to be extensible by using OPTS "framework" ([0]). Given we don't change
the names, we use a similar approach as with bpf_prog_load(), but this
time we ended up with two APIs with the same name and same number of
arguments, so overloading based on number of arguments with
___libbpf_override() doesn't work.
Instead, use "overloading" based on types. In this particular case,
print callback has to be specified, so we detect which argument is
a callback. If it's 4th (last) argument, old implementation of API is
used by user code. If not, it must be 2nd, and thus new implementation
is selected. The rest is handled by the same symbol versioning approach.
btf_ext argument is dropped as it was never used and isn't necessary
either. If in the future we'll need btf_ext, that will be added into
OPTS-based struct btf_dump_opts.
struct btf_dump_opts is reused for both old API and new APIs. ctx field
is marked deprecated in v0.7+ and it's put at the same memory location
as OPTS's sz field. Any user of new-style btf_dump__new() will have to
set sz field and doesn't/shouldn't use ctx, as ctx is now passed along
the callback as mandatory input argument, following the other APIs in
libbpf that accept callbacks consistently.
Again, this is quite ugly in implementation, but is done in the name of
backwards compatibility and uniform and extensible future APIs (at the
same time, sigh). And it will be gone in libbpf 1.0.
[0] Closes: https://github.com/libbpf/libbpf/issues/283
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111053624.190580-5-andrii@kernel.org
btf__dedup() and struct btf_dedup_opts were added before we figured out
OPTS mechanism. As such, btf_dedup_opts is non-extensible without
breaking an ABI and potentially crashing user application.
Unfortunately, btf__dedup() and btf_dedup_opts are short and succinct
names that would be great to preserve and use going forward. So we use
___libbpf_override() macro approach, used previously for bpf_prog_load()
API, to define a new btf__dedup() variant that accepts only struct btf *
and struct btf_dedup_opts * arguments, and rename the old btf__dedup()
implementation into btf__dedup_deprecated(). This keeps both source and
binary compatibility with old and new applications.
The biggest problem was struct btf_dedup_opts, which wasn't OPTS-based,
and as such doesn't have `size_t sz;` as a first field. But btf__dedup()
is a pretty rarely used API and I believe that the only currently known
users (besides selftests) are libbpf's own bpf_linker and pahole.
Neither use case actually uses options and just passes NULL. So instead
of doing extra hacks, just rewrite struct btf_dedup_opts into OPTS-based
one, move btf_ext argument into those opts (only bpf_linker needs to
dedup btf_ext, so it's not a typical thing to specify), and drop never
used `dont_resolve_fwds` option (it was never used anywhere, AFAIK, it
makes BTF dedup much less useful and efficient).
Just in case, for old implementation, btf__dedup_deprecated(), detect
non-NULL options and error out with helpful message, to help users
migrate, if there are any user playing with btf__dedup().
The last remaining piece is dedup_table_size, which is another
anachronism from very early days of BTF dedup. Since then it has been
reduced to the only valid value, 1, to request forced hash collisions.
This is only used during testing. So instead introduce a bool flag to
force collisions explicitly.
This patch also adapts selftests to new btf__dedup() and btf_dedup_opts
use to avoid selftests breakage.
[0] Closes: https://github.com/libbpf/libbpf/issues/281
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111053624.190580-4-andrii@kernel.org
Add bpf_program__flags() API to retrieve prog_flags that will be (or
were) supplied to BPF_PROG_LOAD command.
Also add bpf_program__set_extra_flags() API to allow to set *extra*
flags, in addition to those determined by program's SEC() definition.
Such flags are logically OR'ed with libbpf-derived flags.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111051758.92283-2-andrii@kernel.org
The minimum supported C standard version is C89, with use of GNU
extensions, hence make sure to catch any instances that would break
the build for this mode by passing -std=gnu89.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211105234243.390179-4-memxor@gmail.com
It's not enough to just free(map->inner_map), as inner_map itself can
have extra memory allocated, like map name.
Fixes: 646f02ffdd ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-3-andrii@kernel.org
This deprecation annotation has no effect because for struct deprecation
attribute has to be declared after struct definition. But instead of
moving it to the end of struct definition, remove it. When deprecation
will go in effect at libbpf v0.7, this deprecation attribute will cause
libbpf's own source code compilation to trigger deprecation warnings,
which is unavoidable because libbpf still has to support that API.
So keep deprecation of APIs, but don't mark structs used in API as
deprecated.
Fixes: e21d585cb3 ("libbpf: Deprecate multi-instance bpf_program APIs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-8-andrii@kernel.org
Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]). bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.
This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
- bpf_load_program();
- bpf_load_program_xattr();
- bpf_verify_program().
Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.
Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.
We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.
For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).
To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.
This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.
The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.
[0] Closes: https://github.com/libbpf/libbpf/issues/284
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org
Allow to control number of BPF_PROG_LOAD attempts from outside the
sys_bpf_prog_load() helper.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-3-andrii@kernel.org
It's confusing that libbpf-provided helper macro doesn't start with
LIBBPF. Also "declare" vs "define" is confusing terminology, I can never
remember and always have to look up previous examples.
Bypass both issues by renaming DECLARE_LIBBPF_OPTS into a short and
clean LIBBPF_OPTS. To avoid breaking existing code, provide:
#define DECLARE_LIBBPF_OPTS LIBBPF_OPTS
in libbpf_legacy.h. We can decide later if we ever want to remove it or
we'll keep it forever because it doesn't add any maintainability burden.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-2-andrii@kernel.org
Fix bpf_map_lookup_and_delete_elem_flags() to pass the return code through
libbpf_err_errno() as we do similarly in bpf_map_lookup_and_delete_elem().
Fixes: f12b654327 ("libbpf: Streamline error reporting for low-level APIs")
Signed-off-by: Mehrdad Arshad Rad <arshad.rad@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211104171354.11072-1-arshad.rad@gmail.com
Add few sanity checks for relocations to prevent div-by-zero and
out-of-bounds array accesses in libbpf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-6-andrii@kernel.org
e_shnum does include section #0 and as such is exactly the number of ELF
sections that we need to allocate memory for to use section indices as
array indices. Fix the off-by-one error.
This is purely accounting fix, previously we were overallocating one
too many array items. But no correctness errors otherwise.
Fixes: 25bbbd7a44 ("libbpf: Remove assumptions about uniqueness of .rodata/.data/.bss maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-5-andrii@kernel.org
.BTF and .BTF.ext ELF sections should have SHT_PROGBITS type and contain
data. If they are not, ELF is invalid or corrupted, so bail out.
Otherwise this can lead to data->d_buf being NULL and SIGSEGV later on.
Reported by oss-fuzz project.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-4-andrii@kernel.org
If BTF is corrupted DATASEC's variable type ID might be incorrect.
Prevent this easy to detect situation with extra NULL check.
Reported by oss-fuzz project.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-3-andrii@kernel.org
Prevent divide-by-zero if ELF is corrupted and has zero sh_entsize.
Reported by oss-fuzz project.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-2-andrii@kernel.org
As part of the road to libbpf 1.0, and discussed in libbpf issue tracker
[0], bpf_program__get_prog_info_linear and its associated structs and
helper functions should be deprecated. The functionality is too specific
to the needs of 'perf', and there's little/no out-of-tree usage to
preclude introduction of a more general helper in the future.
[0] Closes: https://github.com/libbpf/libbpf/issues/313
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211101224357.2651181-5-davemarchevsky@fb.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-11-01
We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).
The main changes are:
1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.
2) Parallelize bpf test_progs, from Yucong and Andrii.
3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.
4) Improve bpf selftests on s390, from Ilya.
5) bloomfilter bpf map type, from Joanne.
6) Big improvements to JIT tests especially on Mips, from Johan.
7) Support kernel module function calls from bpf, from Kumar.
8) Support typeless and weak ksym in light skeleton, from Kumar.
9) Disallow unprivileged bpf by default, from Pawan.
10) BTF_KIND_DECL_TAG support, from Yonghong.
11) Various bpftool cleanups, from Quentin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
bpf: Factor out helpers for ctx access checking
bpf: Factor out a helper to prepare trampoline for struct_ops prog
selftests, bpf: Fix broken riscv build
riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
tools, build: Add RISC-V to HOSTARCH parsing
riscv, bpf: Increase the maximum number of iterations
selftests, bpf: Add one test for sockmap with strparser
selftests, bpf: Fix test_txmsg_ingress_parser error
...
====================
Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Deprecate AF_XDP support in libbpf ([0]). This has been moved to
libxdp as it is a better fit for that library. The AF_XDP support only
uses the public libbpf functions and can therefore just use libbpf as
a library from libxdp. The libxdp APIs are exactly the same so it
should just be linking with libxdp instead of libbpf for the AF_XDP
functionality. If not, please submit a bug report. Linking with both
libraries is supported but make sure you link in the correct order so
that the new functions in libxdp are used instead of the deprecated
ones in libbpf.
Libxdp can be found at https://github.com/xdp-project/xdp-tools.
[0] Closes: https://github.com/libbpf/libbpf/issues/270
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20211029090111.4733-1-magnus.karlsson@gmail.com
There are some instances where we don't use O_CLOEXEC when opening an
fd, fix these up. Otherwise, it is possible that a parallel fork causes
these fds to leak into a child process on execve.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-6-memxor@gmail.com
Add a simple wrapper for passing an fd and getting a new one >= 3 if it
is one of 0, 1, or 2. There are two primary reasons to make this change:
First, libbpf relies on the assumption a certain BPF fd is never 0 (e.g.
most recently noticed in [0]). Second, Alexei pointed out in [1] that
some environments reset stdin, stdout, and stderr if they notice an
invalid fd at these numbers. To protect against both these cases, switch
all internal BPF syscall wrappers in libbpf to always return an fd >= 3.
We only need to modify the syscall wrappers and not other code that
assumes a valid fd by doing >= 0, to avoid pointless churn, and because
it is still a valid assumption. The cost paid is two additional syscalls
if fd is in range [0, 2].
[0]: e31eec77e4 ("bpf: selftests: Fix fd cleanup in get_branch_snapshot")
[1]: https://lore.kernel.org/bpf/CAADnVQKVKY8o_3aU8Gzke443+uHa-eGoM0h7W4srChMXU1S4Bg@mail.gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-5-memxor@gmail.com
This extends existing ksym relocation code to also support relocating
weak ksyms. Care needs to be taken to zero out the src_reg (currently
BPF_PSEUOD_BTF_ID, always set for gen_loader by bpf_object__relocate_data)
when the BTF ID lookup fails at runtime. This is not a problem for
libbpf as it only sets ext->is_set when BTF ID lookup succeeds (and only
proceeds in case of failure if ext->is_weak, leading to src_reg
remaining as 0 for weak unresolved ksym).
A pattern similar to emit_relo_kfunc_btf is followed of first storing
the default values and then jumping over actual stores in case of an
error. For src_reg adjustment, we also need to perform it when copying
the populated instruction, so depending on if copied insn[0].imm is 0 or
not, we decide to jump over the adjustment.
We cannot reach that point unless the ksym was weak and resolved and
zeroed out, as the emit_check_err will cause us to jump to cleanup
label, so we do not need to recheck whether the ksym is weak before
doing the adjustment after copying BTF ID and BTF FD.
This is consistent with how libbpf relocates weak ksym. Logging
statements are added to show the relocation result and aid debugging.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-4-memxor@gmail.com
