The MIDI substream name string is constructed from the combination of
the card shortname (which is taken from USB iProduct) and the USB
iJack. The problem is that some devices put the product name to the
iJack field, too. For example, aplaymidi -l output on the Lanchkey MK
49 are like:
% aplaymidi -l
Port Client name Port name
44:0 Launchkey MK4 49 Launchkey MK4 49 Launchkey MK4
44:1 Launchkey MK4 49 Launchkey MK4 49 Launchkey MK4
where the actual iJack name can't be seen because it's truncated due
to the doubly words.
For resolving those situations, this patch compares the iJack string
with the card shortname, and drops if both start with the same words.
Then the result becomes like:
% aplaymidi -l
Port Client name Port name
40:0 Launchkey MK4 49 Launchkey MK4 49 MIDI In
40:1 Launchkey MK4 49 Launchkey MK4 49 DAW In
A caveat is that there are some pre-defined names for certain
devices in the driver code, and this workaround shouldn't be applied
to them. Similarly, when the iJack isn't specified, we should skip
this check, too. The patch added those checks in addition to the
string comparison.
Suggested-by: Paul Davis <paul@linuxaudiosystems.com>
Tested-by: Paul Davis <paul@linuxaudiosystems.com>
Link: https://lore.kernel.org/CAFa_cKmEDQWcJatbYWi6A58Zg4Ma9_6Nr3k5LhqwyxC-P_kXtw@mail.gmail.com
Link: https://patch.msgid.link/20250429183626.20773-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There seem to be multiple USB device IDs used for these;
the one I have reports as 0b0e:030c when powered on.
(When powered off, it reports as 0b0e:0311.)
Signed-off-by: Joachim Priesner <joachim.priesner@web.de>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250428053606.9237-1-joachim.priesner@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pioneer DJ DJM-V10 is a high end mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Input and output is enabled by this patch:
- 12 channels (6 stereo) in each direction
- 44 100 / 48 000 / 96 000 Hz
- S24_3LE
Capture channels can be configured through alsamixer.
Playback channels are fixed and controlled by hardware knobs on the mixer.
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://patch.msgid.link/20250421155953.4440-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
During initialisation of Focusrite USB audio interfaces, -EPROTO is
sometimes returned from usb_set_interface(), which sometimes prevents
the device from working: subsequent usb_set_interface() and
uac_clock_source_is_valid() calls fail.
This patch adds up to 5 retries in endpoint_set_interface(), with a
delay starting at 5ms and doubling each time. 5 retries was chosen to
allow for longer than expected waits for the interface to start
responding correctly; in testing, a single 5ms delay was sufficient to
fix the issue.
Closes: https://github.com/geoffreybennett/fcp-support/issues/2
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/Z//7s9dKsmVxHzY2@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This code is indented one extra tab. Delete the tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/Z_4458uUI3LURa8M@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the vendor USB offload class driver is not ready/initialized before USB
SND discovers attached devices, utilize snd_usb_rediscover_devices() to
find all currently attached devices, so that the ASoC entities are notified
on available USB audio devices.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-32-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to allow userspace/applications know about USB offloading status,
expose a sound kcontrol that fetches information about which sound card
and PCM index the USB device is mapped to for supporting offloading. In
the USB audio offloading framework, the ASoC BE DAI link is the entity
responsible for registering to the SOC USB layer.
It is expected for the USB SND offloading driver to add the kcontrol to the
sound card associated with the USB audio device. An example output would
look like:
tinymix -D 1 get 'USB Offload Playback Route PCM#0'
-1, -1 (range -1->255)
This example signifies that there is no mapped ASoC path available for the
USB SND device.
tinymix -D 1 get 'USB Offload Playback Route PCM#0'
0, 0 (range -1->255)
This example signifies that the offload path is available over ASoC sound
card index#0 and PCM device#0.
The USB offload kcontrol will be added in addition to the existing
kcontrols identified by the USB SND mixer. The kcontrols used to modify
the USB audio device specific parameters are still valid and expected to be
used. These parameters are not mirrored to the ASoC subsystem.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-31-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add proper checks and updates to the USB substream once receiving a USB QMI
stream enable request. If the substream is already in use from the non
offload path, reject the stream enable request. In addition, update the
USB substream opened parameter when enabling the offload path, so the
non offload path can be blocked.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-30-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several Qualcomm SoCs have a dedicated audio DSP, which has the ability to
support USB sound devices. This vendor driver will implement the required
handshaking with the DSP, in order to pass along required resources that
will be utilized by the DSP's USB SW. The communication channel used for
this handshaking will be using the QMI protocol. Required resources
include:
- Allocated secondary event ring address
- EP transfer ring address
- Interrupter number
The above information will allow for the audio DSP to execute USB transfers
over the USB bus. It will also be able to support devices that have an
implicit feedback and sync endpoint as well. Offloading these data
transfers will allow the main/applications processor to enter lower CPU
power modes, and sustain a longer duration in those modes.
Audio offloading is initiated with the following sequence:
1. Userspace configures to route audio playback to USB backend and starts
playback on the platform soundcard.
2. The Q6DSP AFE will communicate to the audio DSP to start the USB AFE
port.
3. This results in a QMI packet with a STREAM enable command.
4. The QC audio offload driver will fetch the required resources, and pass
this information as part of the QMI response to the STREAM enable command.
5. Once the QMI response is received the audio DSP will start queuing data
on the USB bus.
As part of step#2, the audio DSP is aware of the USB SND card and pcm
device index that is being selected, and is communicated as part of the QMI
request received by QC audio offload. These indices will be used to handle
the stream enable QMI request.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-29-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qualcomm USB audio offload driver utilizes the QMI protocol to
communicate with the audio DSP. Add the necessary QMI header and field
definitions, so the QMI interface driver is able to route the QMI packet
received to the USB audio offload driver.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-28-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of notifying SND platform drivers of connection events, some of
these use cases, such as offloading, require an ASoC USB backend device to
be initialized before the events can be handled. If the USB backend device
has not yet been probed, this leads to missing initial USB audio device
connection events.
Expose an API that traverses the usb_chip array for connected devices, and
to call the respective connection callback registered to the SND platform
driver.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-14-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow for different platforms to be notified on USB SND connect/disconnect
sequences. This allows for platform USB SND modules to properly initialize
and populate internal structures with references to the USB SND chip
device.
Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-13-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With USB audio offloading, an audio session is started from the ASoC
platform sound card and PCM devices. Likewise, the USB SND path is still
readily available for use, in case the non-offload path is desired. In
order to prevent the two entities from attempting to use the USB bus,
introduce a flag that determines when either paths are in use.
If a PCM device is already in use, the check will return an error to
userspace notifying that the stream is currently busy. This ensures that
only one path is using the USB substream.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-12-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Within the UAC descriptor, there is information describing the size of a
sample (bSubframeSize/bSubslotSize) and the number of relevant bits
(bBitResolution). Currently, fmt_bits carries only the bit resolution,
however, some offloading entities may also require the overall size of the
sample. Save this information in a separate parameter, as depending on the
UAC format type, the sample size can not easily be decoded from other
existing parameters.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-11-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow for checks on a specific USB audio device to see if a requested PCM
format is supported. This is needed for support when playback is
initiated by the ASoC USB backend path.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-10-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GXpz
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- PlayStation 5 controllers support (Alex Henrie)
- big revamp and modernization of the aged hid-pidff force feedback
driver (Tomasz Pakuła)
- conversion of hid-lg-g15 to standard multicolor LED API (Kate Hsuan)
- improvement of behavior of Human Presence Sensor (HPD) in amd_sfh
driver (Mario Limonciello)
- other assorted fixes, code cleanups and device ID additions
* tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (70 commits)
HID: remove superfluous (and wrong) Makefile entry for CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
HID: Intel-thc-hid: Intel-quickspi: Correct device state names gramatically
HID: wacom: Remove static WACOM_PKGLEN_MAX limit
HID: amd_sfh: Don't show wrong status for amd_sfh_hpd_info()
HID: amd_sfh: Default to HPD disabled
HID: amd_sfh: Allow configuring whether HPD is enabled or disabled
HID: pidff: Fix set_device_control()
HID: pidff: Fix 90 degrees direction name North -> East
HID: pidff: Compute INFINITE value instead of using hardcoded 0xffff
HID: pidff: Clamp effect playback LOOP_COUNT value
HID: pidff: Rename two functions to align them with naming convention
HID: lenovo: silence unreachable code warning
HID: lenovo: Fix to ensure the data as __le32 instead of u32
HID: bpf: add a v6.11+ compatible BPF fixup for the XPPen ACK05 remote
HID: bpf: new hid_bpf_async.h common header
HID: bpf: import new kfunc from v6.10 & v6.11
HID: bpf: add support for the XP-Pen Artist Pro 19 (gen2)
HID: bpf: Added updated Kamvas Pro 19 descriptor
HID: bpf: Suppress bogus F13 trigger on Sirius keyboard full fan shortcut
HID: bpf: Add support for the default firmware mode of the Huion K20
...
Back-merge of 6.14 devel branch for further developments of TAS
codecsBack-merge of 6.14 devel branch for further developments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mixer quicks for the Pioneer DJM-A9 mixer was added in 5289d00 with
additional capture level values added to the common DJM array of values.
This breaks the existing DJM mixers however as alsa-utils relies on
enumeration of the actual mixer options based on the value array which
results in error when storing state.
This commit just separates the A9 values into a separate array and
references them in the corresponding mixer control.
Fixes: 5289d00696 ("ALSA: usb-audio: Add Pioneer DJ/AlphaTheta DJM-A9 Mixer")
Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://patch.msgid.link/20250316153323.16381-1-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix quirk for CME master keyboards so it not only handles
sysex but also song position pointer, MIDI timing clock, start
and stop messages, and active sensing. All of these can be
output by the CME UF series master keyboards.
Tested with a CME UF6 in a desktop Linux environment as
well as on the Zynthian Raspberry Pi based platform.
Signed-off-by: Ricard Wanderlof <ricard2013@butoba.net>
Link: https://patch.msgid.link/20250313-cme-fix-v1-1-d404889e4de8@butoba.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The module parameter defines number of iso packets per one URB. User is
allowed to set any value to the parameter of type int, which can lead to
various kinds of weird and incorrect behavior like integer overflows,
truncations, etc. Number of packets should be a small non-negative number.
Since this parameter is read-only, its value can be validated on driver
probe.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250303100413.835-1-m.masimov@mt-integration.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for Presonus Studio 1824c, a usb interface
that's UAC2 compliant and it is enabled by identifying the device
ID 194f:010d and works with the code brought in by the 1810c change from
Nick Kossifidis in 2020-02-15.
More infos on the card:
https://www.presonus.com/products/Studio-1824c
Signed-off-by: Amin Dandache <amin.dandache@gmail.com>
Link: https://patch.msgid.link/20250227133027.21148-1-git@amin85.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Re-add the sample-rate quirk for the Pioneer DJM-900NXS2. This
device does not work without setting sample-rate.
Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250220161540.3624660-1-dmitry@d-systems.ee
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We fixed the UAF issue in USB MIDI code by canceling the pending work
at closing each MIDI output device in the commit below. However, this
assumed that it's the only one that is tied with the endpoint, and it
resulted in unexpected data truncations when multiple devices are
assigned to a single endpoint and opened simultaneously.
For addressing the unexpected MIDI message drops, simply replace
cancel_work_sync() with flush_work(). The drain callback should have
been already invoked before the close callback, hence the port->active
flag must be already cleared. So this just assures that the pending
work is finished before freeing the resources.
Fixes: 0125de3812 ("ALSA: usb-audio: Cancel pending work at closing a MIDI substream")
Reported-and-tested-by: John Keeping <jkeeping@inmusicbrands.com>
Closes: https://lore.kernel.org/20250217111647.3368132-1-jkeeping@inmusicbrands.com
Link: https://patch.msgid.link/20250218114024.23125-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many Poly/Plantronics headset families name the feature, input,
and/or output units in a such a way to produce control names
that are not recognized by user space. As such, the volume and
mute events do not get routed to the headset's audio controls.
As an example from a product family:
The microphone mute control is named
Headset Microphone Capture Switch
and the headset volume control is named
Headset Earphone Playback Volume
The quirk fixes these to become
Headset Capture Switch
Headset Playback Volume
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Here is a collection of fixes that have been gathered since the
previous PR. All about device-specific fixes and quirks, and most
of them are pretty small and trivial.
-----BEGIN PGP SIGNATURE-----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=FOg9
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes that have been gathered since the
previous pull request.
All about device-specific fixes and quirks, and most of them are
pretty small and trivial"
* tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/realtek: Workaround for resume on Dell Venue 11 Pro 7130
ALSA: hda: Fix headset detection failure due to unstable sort
ALSA: pcm: use new array-copying-wrapper
ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control
ASoC: amd: acp: Fix possible deadlock
firmware: cs_dsp: FW_CS_DSP_KUNIT_TEST should not select REGMAP
ALSA: usb-audio: Add delay quirk for iBasso DC07 Pro
ALSA: hda/realtek: Fix quirk matching for Legion Pro 7
ASoC: renesas: SND_SIU_MIGOR should depend on DMADEVICES
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V
ASoC: da7213: Initialize the mutex
ASoC: use to_platform_device() instead of container_of()
ASoC: acp: Support microphone from Lenovo Go S
ASoC: SOF: imx8m: Add entry for new 8M Plus revision
ASoC: SOF: imx8: Add entries for new 8QM and 8QXP revisions
ASoC: SOF: imx: Add mach entry to select cs42888 topology
dt-bindings: arm: imx: Add board revisions for i.MX8MP, i.MX8QM and i.MX8QXP
ASoC: fsl_asrc_m2m: select CONFIG_DMA_SHARED_BUFFER
ASoC: audio-graph-card2: use correct endpoint when getting link parameters
ASoC: SOF: imx8m: add SAI2,5,6,7
...
this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap library
code.
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some
cleanup and Rust preparation in the xarray library code.
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes
pathnames in some code comments.
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the
new secs_to_jiffies() in various places where that is appropriate.
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API.
- "Convert ocfs2 to use folios" from Matthew Wilcox does that.
- "Remove get_task_comm() and print task comm directly" from Yafang Shao
removes now-unneeded calls to get_task_comm() in various places.
- "squashfs: reduce memory usage and update docs" from Phillip Lougher
implements some memory savings in squashfs and performs some
maintainability work.
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work.
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a
corrupted image.
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc.
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger.
- "minmax.h: Cleanups and minor optimisations" from David Laight
does some maintenance work on the min/max library code.
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work
on the xarray library code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5SP5QAKCRDdBJ7gKXxA
jqN7AQChvwXGG43n4d5SDiA/rH7ddvowQcDqhC9cAMJ1ReR7qwEA8/LIWDE4PdMX
mJnaZ1/ibpEpearrChCViApQtcyEGQI=
=ti4E
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=2fc6, idProduct=f0b7
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iBasso DC07 Pro
usb 1-1: Manufacturer: iBasso
usb 1-1: SerialNumber: CTUA171130B
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/TYUPR06MB62174A48D04E09A37996DF84D2ED2@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The FCP driver defined hwdep read function with ssize_t, but it should
be long due to historical reason. This caused build errors on 32bit
archs.
Fixes: 46757a3e7d ("ALSA: FCP: Add Focusrite Control Protocol driver")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patch.msgid.link/20250120145617.07945574@canb.auug.org.au
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new device_setup option (SCARLETT2_USE_FCP_DRIVER = 0x08) that
allows users to opt in to using the new FCP driver instead of the
existing scarlett2 driver for their device. This provides a way to
test the new FCP driver on existing supported hardware while keeping
the Scarlett2 driver as the default.
When the SCARLETT2_USE_FCP_DRIVER bit is set in device_setup, the
scarlett2 driver initialisation will hand off to the FCP driver
instead of proceeding with its own initialisation. The FCP driver then
provides access to the device via its hwdep interface.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/94ffd7971d73cb0cbea6933b28f7528ce5b9edde.1737048528.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new kernel driver for the Focusrite Control Protocol (FCP),
which is used by Focusrite Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett
USB, Clarett+, and Vocaster series audio interfaces. This driver
provides a user-space control interface via ALSA's hwdep subsystem.
Unlike the existing Scarlett2 driver which implements all ALSA
controls in kernel space, this new FCP driver takes a different
approach by providing a minimal kernel interface that allows a
user-space driver to send FCP commands and receive notifications. The
only control implemented in kernel space is the Level Meter, since it
requires frequent polling of volatile data.
While this driver supports all interfaces that the Scarlett2 driver
works with, it is initially enabled only for 4th Gen 16i16, 18i16,
and 18i20 interfaces that are not supported by the Scarlett2 driver.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/597741a9b1198b965561547511d3d345f91cba20.1737048528.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=0d8c, idProduct=0014
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Audio Device
usb 1-1: Manufacturer: C-Media Electronics Inc.
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217E94D922B9BF422A73F32D2192@TYUPR06MB6217.apcprd06.prod.outlook.com
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-19-ddfefd7e9f2a@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jeff Johnson <jjohnson@kernel.org>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Praveen Kaligineedi <pkaligineedi@google.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Shailend Chand <shailend@google.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Simon Horman <horms@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
UAC 2 & 3 DAC's set bit 31 of the format to signal support for a
RAW_DATA type, typically used for DSD playback.
This is correctly tested by (format & UAC*_FORMAT_TYPE_I_RAW_DATA),
fp->dsd_raw = true; and call snd_usb_interface_dsd_format_quirks(),
however a confusing and unnecessary message gets printed because
the bit is not properly tested in the last "unsupported" if test:
if (format & ~0x3F) { ... }
For example the output:
usb 7-1: new high-speed USB device number 5 using xhci_hcd
usb 7-1: New USB device found, idVendor=262a, idProduct=9302, bcdDevice=0.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 7-1: Product: TC44C
usb 7-1: Manufacturer: TC44C
usb 7-1: SerialNumber: 5000000001
hid-generic 0003:262A:9302.001E: No inputs registered, leaving
hid-generic 0003:262A:9302.001E: hidraw6: USB HID v1.00 Device [DDHIFI TC44C] on usb-0000:08:00.3-1/input0
usb 7-1: 2:4 : unsupported format bits 0x100000000
This last "unsupported format" is actually wrong: we know the
format is a RAW_DATA which we assume is DSD, so there is no need
to print the confusing message.
This we unset bit 31 of the format after recognizing it, to avoid
the message.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://patch.msgid.link/20241209090529.16134-2-adrian.ratiu@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems there is an alternate version of the hardware with a different
PID. User testing reveals this still works with the same interface as far
as the kernel is concerned, so just add the extra PID. Thanks to Heiko
Engemann for testing with this version.
Due to the way quirks-table.h is structured, that means we have to turn
the entire quirk struct into a macro to avoid duplicating it...
Cc: stable@vger.kernel.org
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20241202-rme-digiface-usb-id-v1-1-50f730d7a46e@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The usb_get_descriptor() function does DMA so we're not allowed
to use a stack buffer for that. Doing DMA to the stack is not portable
all architectures. Move the "new_device_descriptor" from being stored
on the stack and allocate it with kmalloc() instead.
Fixes: b909df18ce ("ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices")
Cc: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Corsair HS80 RGB Wireless is a USB headset with a mic and a sidetone
feature. It has the same quirk as the Virtuoso series.
This labels the mixers appropriately, so applications don't
move the sidetone volume when they actually intend to move the main
headset volume.
Signed-off-by: Marie Ramlow <me@nycode.dev>
cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241130165240.17838-1-me@nycode.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The low-latency mode of USB-audio driver uses a similar approach like
the implicit feedback mode but it has an explicit queuing at the
trigger start time. The difference is, however, that no packet will
be handled any longer after all queued packets are handled but no
enough data is fed. In the case of implicit feedback mode, the
capture-side packet handling triggers the re-queuing, and this checks
the XRUN. OTOH, in the low-latency mode, it just stops without XRUN
notification unless any new action is taken from user-space via ack
callback. For example, when you stop the stream in aplay, no XRUN is
reported.
This patch adds the XRUN check at the packet complete callback in the
case all pending URBs are exhausted. Strictly speaking, this state
doesn't match really with XRUN; in theory the application may queue
immediately after this happens. But such behavior is only for
1-period configuration, which the USB-audio driver doesn't support.
So we may conclude that this situation leads certainly to XRUN.
A caveat is that the XRUN should be triggered only for the PCM RUNNING
state, and not during DRAINING. This additional state check is put in
notify_xrun(), too.
Fixes: d5f871f89e ("ALSA: usb-audio: Improved lowlatency playback support")
Reported-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/25d5b0d8-4efd-4630-9d33-7a9e3fa9dc2b@gmail.com
Link: https://patch.msgid.link/20241128080446.1181-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current USB-audio driver code doesn't check bLength of each
descriptor at traversing for clock descriptors. That is, when a
device provides a bogus descriptor with a shorter bLength, the driver
might hit out-of-bounds reads.
For addressing it, this patch adds sanity checks to the validator
functions for the clock descriptor traversal. When the descriptor
length is shorter than expected, it's skipped in the loop.
For the clock source and clock multiplier descriptors, we can just
check bLength against the sizeof() of each descriptor type.
OTOH, the clock selector descriptor of UAC2 and UAC3 has an array
of bNrInPins elements and two more fields at its tail, hence those
have to be checked in addition to the sizeof() check.
Reported-by: Benoît Sevens <bsevens@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/20241121140613.3651-1-bsevens@google.com
Link: https://patch.msgid.link/20241125144629.20757-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Link: https://patch.msgid.link/20241120124144.3814457-1-bsevens@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current 6fire code tries to release the resources right after the
call of usb6fire_chip_abort(). But at this moment, the card object
might be still in use (as we're calling snd_card_free_when_closed()).
For avoid potential UAFs, move the release of resources to the card's
private_free instead of the manual call of usb6fire_chip_destroy() at
the USB disconnect callback.
Fixes: c6d43ba816 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-6-tiwai@suse.de
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
This patch also splits the code to the disconnect and the free phases;
the former is called immediately at the USB disconnect callback while
the latter is called from the card destructor.
Fixes: 523f1dce37 ("[ALSA] Add Native Instrument usb audio device support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-5-tiwai@suse.de
us122l.mmap_count field was used for counting the hwdep mmap opens and
syncing at disconnection. But such a manual sync isn't needed, as the
refcount check is done in the ALSA core side. So let's drop it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-4-tiwai@suse.de
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
The loop of us122l->mmap_count check is dropped as well. The check is
useless for the asynchronous operation with *_when_closed().
Fixes: 030a07e441 ("ALSA: Add USB US122L driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-3-tiwai@suse.de
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
Fixes: 230cd5e248 ("[ALSA] prevent oops & dead keyboard on usb unplugging while the device is be ing used")
Reported-by: syzbot+73582d08864d8268b6fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=73582d08864d8268b6fd
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-2-tiwai@suse.de
This patch switches the P-125 quirk entry to use a composite quirk as the
P-125 supplies both MIDI and Audio like many of the other Yamaha
keyboards
Signed-off-by: Eryk Zagorski <erykzagorski@gmail.com>
Link: https://patch.msgid.link/20241111164520.9079-2-erykzagorski@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that many webcams have buggy firmware and don't expose the
mic capture volume with the proper resolution. We have workarounds in
mixer.c, but judging from the numbers, those can be better managed as
global quirk flags.
Link: https://patch.msgid.link/20241105120220.5740-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This also includes a change to the capture level as they differ with
this device, as well as additional values for prefader channels.
Acked-by: Olivia Mackintosh <livvy@base.nu>
Signed-off-by: Sarah Grant <s@srd.tw>
Link: https://patch.msgid.link/20241025163927.12662-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Simplified code by removing redundant assignment of sprintf return value
and improved safety by replacing sprintf with snprintf.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241009070944.6937-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Line6 driver source code files contain an outdated email address of the
original author. This patch updates the contact information.
Signed-off-by: Markus Grabner <line6@grabner-graz.at>
Link: https://patch.msgid.link/20241009194251.15662-1-line6@grabner-graz.at
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit adding support for multiple control interfaces expanded struct
snd_usb_power_domain with pointer to control interface for proper control
message routing but missed one initialization point of this structure,
which has left new field with NULL value.
Standard mandates that each device has at least one control interface and
code responsible for power domain does not check for NULL values when
querying for control interface. This caused some USB devices to crash
the kernel.
Fixes: 6aa8700150 ("ALSA: usb-audio: Support multiple control interfaces")
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285B563C6B5394DB274813FEC782@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for retrieving the device map from Focusrite Scarlett 4th
Gen and Vocaster devices. The device map is a base64-encoded,
zlib-compressed JSON description of the device's capabilities and
configuration.
This patch adds:
- a has_devmap field to the scarlett2_device_info struct
- a /proc/asound/cardX/device-map.json.zz.b64 file when supported
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/e86380c6792460d8d05a8ecc37c9ebd072be25a5.1727971672.git.g@b4.vu
The current handling of linked channels for the 4th Gen 2i2 and 4i4
models is more complicated than necessary. The firmware has a link
control for each channel, and the channel selection can be any channel
regardless of the channel link status. The driver can therefore be
simplified by having it reflect the controls presented by the
firmware, and complexities related to trying to reflect the channel
link status in the Input Select Capture Enum control are not
necessary.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/9bf8a2ab35f243820d066319b7d407b45a61281b.1727971672.git.g@b4.vu
Add hw monitor volume control for POD HD500X. This is done adding
LINE6_CAP_HWMON_CTL to the capabilities
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241003232828.5819-1-hmoller@uc.cl
Add native DSD support for Luxman D-08u DAC, by adding the PID/VID 1852:5062.
This makes DSD playback work, and also sound quality when playing PCM files
is improved, crackling sounds are gone.
Signed-off-by: Jan Lalinsky <lalinsky@c4.cz>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241003030811.2655735-1-lalinsky@c4.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Implement sync, output format, and input status mixer controls, to allow
the interface to be used as a straight ADAT/SPDIF (+ Headphones) I/O
interface.
This does not implement the matrix mixer, output gain controls, or input
level meter feedback. The full mixer interface is only really usable
using a dedicated userspace control app (there are too many mixer nodes
for alsamixer to be usable), so for now we leave it up to userspace to
directly control these features using raw USB control messages. This is
similar to how it's done with some FireWire interfaces (ffado-mixer).
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-2-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add trivial support for audio streaming on the RME Digiface USB. Binds
only to the first interface to allow userspace to directly drive the
complex I/O and matrix mixer controls.
Signed-off-by: Cyan Nyan <cyan.vtb@gmail.com>
[Lina: Added 2x/4x sample rate support & boot/format quirks]
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-1-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://patch.msgid.link/20240826043454.3198-1-shenlichuan@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply the newly introduced macros for reduce the complex expressions
and cast in the quirk table definitions. It results in a significant
code reduction, too.
There should be no functional changes.
Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many entries in the USB-audio quirk tables have relatively complex
expressions. For improving the readability, introduce a few macros.
Those are applied in the following patch.
Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'.
The problem stems from the driver not being able to find input/output
terminals required to configure audio streaming. The information about
those terminals is stored in AudioControl Interface. Numark device
contains 2 AudioControl Interfaces and the driver checks only one of them.
According to the USB standard, a device can have multiple audio functions,
each represented by Audio Interface Collection. Every audio function is
considered to be closed box and will contain unique AudioControl Interface
and zero or more AudioStreaming and MIDIStreaming Interfaces.
The Numark device adheres to the standard and defines two audio functions:
- MIDIStreaming function
- AudioStreaming function
It starts with MIDI function, followed by the audio function. The driver
saves the first AudioControl Interface in `snd_usb_audio` structure
associated with the entire device. It then attempts to use this interface
to query for terminals and clocks. However, this fails because the correct
information is stored in the second AudioControl Interface, defined in the
second Audio Interface Collection.
This patch introduces a structure holding association between each
MIDI/Audio Interface and its corresponding AudioControl Interface,
instead of relying on AudioControl Interface defined for the entire
device. This structure is populated during usb probing phase and leveraged
later when querying for terminals and when sending USB requests.
Alternative solutions considered include:
- defining a quirk for Numark where the order of interface is manually
changed, or terminals are hardcoded in the driver. This solution would
have fixed only this model, though it seems that device is USB compliant,
and it also seems that other devices from this company may be affected.
What's more, it looks like products from other manufacturers have similar
problems, i.e. Rane One DJ console
- keeping a list of all AudioControl Interfaces and querying all of them
to find required information. That would have solved my problem and have
low probability of breaking other devices, as we would always start with
the same logic of querying first AudioControl Interface. This solution
would not have followed the standard though.
This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds
the first AudioControl Interface, and uses it as a fallback when some
interfaces are not parsed correctly and lack an associated AudioControl
Interface, i.e., when configured via quirks.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing input gain and master output mixer controls for
RME Babyface Pro.
This patch implements:
1. Input gain controls for 2 mic and 2 line inputs
2. Master output volume controls for all 12 output channels
These additions allow for more complete control of the Babyface Pro under
Linux.
Signed-off-by: Stefan Stistrup <sstistrup@gmail.com>
Link: https://patch.msgid.link/20240809204922.20112-1-sstistrup@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use snd_pcm_rate_to_rate_bit() helper provided by Alsa instead
re-implementing it. This reduce code duplication and helps when
changing some Alsa definition is necessary.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240808134857.86749-1-jbrunet@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The call of usb_set_interface() and a delay are superfluous when the
device has been already disconnected. Add a disconnection check
before doing it.
Link: https://patch.msgid.link/20240808091522.31415-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At the code refactoring of USB-audio quirk handling, I assumed that
the quirk entries of Stanton ScratchAmp devices were only about the
device name, and moved them completely into the rename table.
But it seems that the device requires the quirk entry so that it's
probed by the driver itself.
This re-adds back the quirk entries of ScratchAmp, but in a
minimalistic manner.
Fixes: 5436f59bc5 ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Link: https://patch.msgid.link/20240808081803.22300-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some superfluous debug prints are dropped, and some ambiguous messages
are slightly rephrased. The sk.dev pointer is set properly for
allowing to call dev_*() functions, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-45-tiwai@suse.de
When a FB is created from a GTB instead of UMP FB Info inquiry, we
missed the update of the corresponding UMP Group attributes.
Export the call of updater and let it be called from the USB driver.
Fixes: 0642a3c5ca ("ALSA: ump: Update substream name from assigned FB names")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-5-tiwai@suse.de
