When IMR boot is supported on a platform it is always going to be used to
boot the DSP unless some catastrophic event happens.
There is no way for a developer to force a clean DSP boot without removing
and re-inserting the modules.
Create a 'skip_imr_boot' debugfs file which can be used to force the
next DSP boot as clean (prune) boot.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240403105210.17949-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Small changes with 3 cppcheck fixes and the firmware version now
visible with debugfs instead of only via dmesg logs.
The node_id for multi-gateway ALH DAI's get overwritten with the
group_id during the DAI copier's ipc_prepare op. So, save the ALH
dai_index during the BE DAI hw_params in the dai_index field of struct
ipc4_copier and use that to set the device ID in the configuration blob.
This will avoid errors during copier init after an xrun.
Note that the dai_index is typically set in topology for DMIC/SSP, but
it's not used for ALH. Reclaiming this dai_index field to store the
node_id does not generate a conflict with topology-defined values.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the delayed stops, the xrun handling is problematic: the
applications expects everything to be reset but the firmware and DMA
are still in a PAUSED state.
This patch makes sure the prepare while pending_stop is set is
special-cased.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a state variable to keep track of delayed stops, in case
pcm_ops->platform_stop_during_hw_free is set.
This patch should be iso-functionality, possibly removing no-op
cases. The main purpose of this new state variable is to prepare a
follow-up patch to reset all PCM and DMAs in case of stop/prepare xrun
sequences.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The same sequence is used twice, use common helper.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason the existing code stops on the first error, which
potentially leaves the DMA and widgets in a weird state.
Change to free-up all resources even in case of errors.
Also add a more consistent error handling and logs, with the first
error code returned to the caller.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When an xrun happens, the BE DAI hw_params doesn't get invoked before
the stream restarts with a prepare. In this case, clearing the node ID
when the DAI widget is freed and unprepared will result in an error when
it is re-initialized. In order to avoid this, move the code to clear the
node ID to the BE DAI hw_free op to keep it balanced with the BE DAI
hw_params.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow using widget_to_sdev() in other files, move it as static inline
in shared header file.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The node_id value needs to be handled specifically for ALH.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add intel_alh_id to set the expected gateway node_id in a follow-up
patch.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've already defined the value for dai_index, let's use it instead of
open-coding the same thing. No functionality change.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to be able to set the dai config differently for SoundWire.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_ipc4_dma_config_tlv{} is required for ACE2.x. The patch follow the
convention to set the dma_stream_channel_map.mapping device as
"link_id << 8 | pdi_id".
And the mapping in sof_ipc4_alh_configuration_blob{} should be the same
as dma_stream_channel_map.mapping in sof_ipc4_dma_config{}.
The purposes of device id is to map DMA tlv.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We always use the lowest N channels of stream. So, set ch_mask to
GENMASK(params_channels(params) - 1, 0).
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each stream needs a dma_config_tlv. We will handle multi dma_config_tlv
in the follow up commits.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit f8ba62ac86.
The SoundWire aggregated solution was to use one DMA on multiple links.
But, the solution changed to use one DMA for each link. It means that
we should assign HDaudio stream_tag for each cpu_dai.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 699e146d9e.
Don't reset device_count as we will use the multi-gateway firmware
configuration.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code derives the channel map used to program the HDaudio
link DMA from the hw_params, but that is not quite right in the case
of aggregation. The code in soc-pcm.c splits the hw_params depending
on the codec_ch_map, and we need to reconstruct the channel-map to
insert the data in the right places.
This issue is seen only on amplifier feedback capture where the data
from the second amplifier was replaced by that of the first amplifier.
Note that the loop iterator of the macro for_each_rtd_cpu_dais() is
reused in a following loop. This is different to all existing usages
of that macro, hence the use of a boolean flag to avoid an access to
an uninitialized variable.
Fixes: 2960ee5c48 ("ASoC: SOF: Intel: hda-dai: add helpers for SoundWire callbacks")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Somehow instance_id and id were mixed. Align on instance_id for
consistency.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports this issue:
sound/soc/sof/amd/acp-loader.c:299:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = request_firmware(&adata->fw_dbin, fw_filename, sdev->dev);
^
sound/soc/sof/amd/acp-loader.c:289:6: note: ret is assigned
ret = snd_sof_dsp_block_write(sdev, SOF_FW_BLK_TYPE_IRAM, 0,
^
sound/soc/sof/amd/acp-loader.c:299:6: note: ret is overwritten
ret = request_firmware(&adata->fw_dbin, fw_filename, sdev->dev);
^
This behavior is probably unintentional, there's no reason to return
an error for the DRAM but not the IRAM.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new flags to tplg_quirk_mask to detect and append codec/amplifier
tplg suffix to topology file name at runtime. With this feature we
could implement an enumeration entry for all boards which implement
same headphone codec regardless the speaker amplifier type.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The current version of delay reporting code can report incorrect
values when paired with a firmware which enables this feature.
Unfortunately there are several smaller issues that needed to be addressed
to correct the behavior:
Wrong information was used for the host side of counter
For MTL/LNL used incorrect (in a sense that it was verified only on MTL)
link side counter function.
The link side counter needs compensation logic if pause/resume is used.
The offset values were not refreshed from firmware.
Finally, not strictly connected, but the ALSA buffer size needs to be
constrained to avoid constant xrun from media players (like mpv)
The series applies cleanly for 6.9 and 6.8.y stable, but older stable
would need manual backport, but it is questionable if it is needed as
MTL/LNL is missing features.
The original timestamp is built base on windows epoch time which is not
fit for Linux system and difficult to be used for kernel debugging. This
patch adopts syslog timestamp so that we can simply use dmesg to check
the timestamp between fw and kernel.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240322112703.4549-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SoCs with ACE architecture are tailored to use s2idle instead deep (S3)
suspend state and the IMR content is lost when the system is forced to
enter even to S3.
When waking up from S3 state the IMR boot will fail as the content is lost.
Set the skip_imr_boot flag to make sure that we don't try IMR in this case.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240322112504.4192-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During pause/reset or stop/start the LLP counter is not reset, which will
result broken delay reporting.
Read the LLP value on STOP/PAUSE trigger and use it in LLP reading to
normalize the LLP from the register.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch improves the delay calculation by relying on the
LLP (Linear Link Position) on the DAI side and the
LDP (Linear Data Pointer) on the host side. The LDP provides the same DMA
position as LPIB, but with a linear count instead of a position in the
ALSA ring buffer. The LDP values are provided in bytes and must be
converted to frames. The difference in units means that the host counter
will wrap earlier than the LLP. We need to wrap the LLP at the same
boundary as the host counter.
The ASoC framework relies on separate pointer and delay callback.
Measurement errors can be reduced by processing all the counter values in
the pointer callback. The delay value is stored, and will be reported to
higher levels in the delay callback.
For playback, the firmware provides a stream_start offset to handle
mixing/pause usages, where the DAI might have started earlier than the
PCM device. The delay calculation must be special-cased when the link
counter has not reached the start offset value, i.e. no valid audio has
left the DSP.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC specific pointer callback can be used when additional or custom
handling is needed during the pointer calculation, like executing a delay
calculation at the same time to minimize drift between the reported pointer
and the calculated delay.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the final state is SOF_IPC4_PIPE_PAUSED, it is possible that the
stream will be restarted (resume or start) in which case we need to update
the offset from the firmware.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SNDRV_PCM_TRIGGER_PAUSE_PUSH does not need to be a separate case, it
can be handled along with STOP and SUSPEND
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_ipc4_timestamp_info is only used by ipc4-pcm.c internally, it
should not be in a generic header implying that it might be used elsewhere.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The get_stream_position has been replaced by get_dai_frame_counter and all
related code can be dropped form the core.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The get_stream_position has been replaced by get_dai_frame_counter, it
should not be set to allow it to be dropped from core code.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to the new callback to retrieve the DAI (link) frame counter.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implementation for reading the LDP (Linear DMA Position) to be used as
get_host_byte_counter().
The LDP is counting the number of bytes moved between the DSP and host
memory.
Set the get_dai_frame_counter to hda_dsp_get_stream_llp, which is counting
the frames on the link side of the DSP.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For delay calculation we need two information:
Number of bytes transferred between the DSP and host memory (ALSA buffer)
Number of frames transferred between the DSP and external device
(link/codec/DMIC/etc).
The reason for the different units (bytes vs frames) on host and dai side
is that the format on the dai side is decided by the firmware and might
not be the same as on the host side, thus the expectation is that the
counter reflects the number of frames.
The kernel know the host side format and in there we have access to the
DMA position which is in bytes.
In a simplified way, the DSP caused delay is the difference between the
two counters.
The existing get_stream_position callback is defined to retrieve the frame
counter on the DAI side but it's name is too generic to be intuitive and
makes it hard to define a callback for the host side.
This patch introduces a new set of callbacks to replace the
get_stream_position and define the host side equivalent:
get_dai_frame_counter
get_host_byte_counter
Subsequent patches will remove the old callback.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the MTL mtl_dsp_get_stream_hda_link_position() function and related
defines since it can only work on platforms which have 19 streams because
of the use of 0x948 as base offset for the LLP registers.
The generic hda_dsp_get_stream_hda_link_position() takes the number of
streams into consideration when reading the LLP registers for the stream
and can handle different HDA configurations.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the Linear Link Position is not available in firmware SRAM window we
use the host accessible position registers to read it.
The address of the PPLCLLPL/U registers depend on the number of streams
(playback+capture).
At probe time the pplc_addr is calculated for each stream and we can use
it to read the LLP without the need of address re-calculation.
Set the get_stream_position callback in sof_hda_common_ops for all
platforms:
The callback is used for IPC4 delay calculations only but the register is
a generic HDA register, not tied to any specific IPC version.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the PCM have the dsp_max_burst_size_in_ms set then place a constraint
to limit the minimum buffer time to avoid xruns caused by DMA bursts
spinning on the ALSA buffer.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When setting up the pcm widget, save the DSP buffer size (in ms) for
platform code to place a constraint on playback.
On playback the DMA will fill the buffer on start and if the period
size is smaller it will immediately overrun.
On capture the DMA will move data in 1ms bursts.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dsp_max_burst_size_in_ms can be used to save the length of the maximum
burst size in ms the host DMA will use.
Platform code can place constraint using this to avoid user space
requesting too small ALSA buffer which will result xruns.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endpoint in NHLT table for a SSP port could have the device type
NHLT_DEVICE_BT or NHLT_DEVICE_I2S. Use intel_nhlt_ssp_device_type()
function to retrieve the device type before querying the endpoint
blob to make sure we are always using correct device type parameter.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20231127120657.19764-3-peter.ujfalusi@linux.intel.com>
The signed_fw_image member of struct sof_amd_acp_desc is used to enable
signed firmware support in the driver via the acp_sof_quirk_table.
In preparation to support additional use cases of the quirk table (i.e.
adding new flags), move signed_fw_image to a new struct acp_quirk_entry
and update all references to it accordingly.
No functional changes intended.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://msgid.link/r/20240220201623.438944-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based (cAVS 2.5) e.g.: RPL, inherit most of the functionality
from previous platforms:
SKL <- APL <- CNL <- ICL <- TGL
rather than putting everything into a single file, the platform-specific
bits are split into cnl/icl/tgl.c files instead. Makes the division clear
and code easier to maintain.
Layout of the patchset:
First are two changes combined together address the sound-clipping
problem, present when only one stream is running - specifically one
CAPTURE stream.
Follow up is naming-scheme adjustment for some of the existing functions
what improves code incohesiveness. As existing IPC/IRQ code operates
solely on cAVS 1.5 architecture, it needs no abstraction. The situation
changes when newer platforms come into the picture. Thus the next two
patches abstract the existing IPC/IRQ handlers so that majority of the
common code can be re-used.
The ICCMAX change stands out a bit - the AudioDSP firmware loading
procedure differs on ICL-based platforms (and onwards) and having a
separate commit makes the situation clear to the developers who are
going to support the solution from LTS perspective. For that reason
I decided not to merge it into the commit introducing the icl.c file.
The soundwire-amd driver has a bit of a layering violation requiring
the SOF driver to directly call into its exported symbols rather than
through an abstraction.
The SND_SOC_SOF_AMD_SOUNDWIRE Kconfig symbol tries to deal with the
dependency by selecting SOUNDWIRE_AMD in a complicated set of conditions,
but gets it wrong for a configuration involving SND_SOC_SOF_AMD_COMMON=y,
SND_SOC_SOF_AMD_ACP63=m, and SND_SOC_SOF_AMD_SOUNDWIRE_LINK_BASELINE=m
SOUNDWIRE_AMD=m, which results in a link failure:
ld.lld: error: undefined symbol: sdw_amd_get_slave_info
>>> referenced by acp-common.c
ld.lld: error: undefined symbol: amd_sdw_scan_controller
ld.lld: error: undefined symbol: sdw_amd_probe
ld.lld: error: undefined symbol: sdw_amd_exit
>>> referenced by acp.c
>>> sound/soc/sof/amd/acp.o:(amd_sof_acp_remove) in archive vmlinux.a
In essence, the SND_SOC_SOF_AMD_COMMON option cannot be built-in when
trying to link against a modular SOUNDWIRE_AMD driver.
Since CONFIG_SOUNDWIRE_AMD is a user-visible option, it really should
never be selected by another driver in the first place, so replace the
extra complexity with a normal Kconfig dependency in SND_SOC_SOF_AMD_SOUNDWIRE,
plus a top-level check that forbids any of the AMD SOF drivers from being
built-in with CONFIG_SOUNDWIRE_AMD=m.
In normal configs, they should all either be built-in or all loadable
modules anyway, so this simplification does not limit any real usecases.
Fixes: d948218424 ("ASoC: SOF: amd: add code for invoking soundwire manager helper functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240219093900.644574-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch complains about "head->full_size - head->header_size" can
underflow. To some extent, we're always going to have to trust the
firmware a bit. However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well.
Fixes: d2458baa79 ("ASoC: SOF: ipc3-loader: Implement firmware parsing and loading")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/r/5593d147-058c-4de3-a6f5-540ecb96f6f8@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
For both ChainDMA and DSPless mode the requirement is that the link must
be serviced by HD-DMA.
On pre Lunar Lake platforms this was only valid for HDAudio links but with
Lunar Lake all link types now serviced by HD-DMA.
This allows us to enable ChainDMA and DSPless mode for SoundWire links as
well.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
Align the IPC4 firmware path/name and the topology path to the documentation:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Tiger Lake and Lunar Lake support is not yet available via the official
firmware release, the paths can be changed now to avoid misalignment in the
future.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: SOF: Intel: pci-lnl: Change the topology path to
intel/sof-ipc4-tplg
sound/soc/sof/intel/pci-lnl.c | 2 +-
sound/soc/sof/intel/pci-tgl.c | 64 +++++++++++++++++------------------
2 files changed, 33 insertions(+), 33 deletions(-)
--
2.43.0
Set ipc4_copier->data.gtw_cfg.config_length dynamically based on
blob->alh_cfg.device_count to align with the other OS.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213123007.29956-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the retain context is enabled we will unconditionally increment the
device's pm use count on each exception and when the drivers are unloaded
we do not correct this (as we don't know how many times we 'prevented
d3 entry').
Introduce a flag to make sure that we do not increment the use count more
than once and on module unload decrement the use count if needed to
balance it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240213114729.7055-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire/ALH, we need to have a dai configured, but we don't want
to send a DMA_TLV to firmware. Add additional code branches.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When DSPless mode is selected the DMIC/SSP offload status should not be
changed since the DSP is not in use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This mode is only supported starting with LunarLake (ACE_2_0).
DMIC and SSP remain supported with the DSP only for now, since they
need a DAI configuration that is provided to firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we have the dai_type we can remove any dependencies on
copiers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting with LunarLake, the dspless mode can handle SoundWire/ALH,
DMIC and SSPs, so we need to identify the dai type from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire integration is different from previous platforms, with
no dependencies on the DSP enablement. We can start the SoundWire
links in the probe instead of waiting for the post_fw_run stage.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For dspless mode, we need to allocate and store an 'sdai'
structure. The existing code allocate the data on the stack and does
not set the widget->private pointer.
This minor change should not have any impact on existing DAIs, even
when the DSP is used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code forces a parameter to be NULL but that parameter is
not used yet. Remove the special case in preparation for additional
changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we have a 'is_chain_dma_supported' callback we can use it to
double-check possible disconnects between a topology file enabling
chain-dma for a DAI and the hardware/firmware capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code uses (stream_tag - 1) for the host and link dma id.
This is correct for playback, but for capture this results in an
invalid dma_type being used. The firmware assumes that the dma_id for
capture is always larger than DAI_NUM_HDA_OUT
This patch adds the offset for num_playback_streams, filled on Intel
platforms with the value extracted from the hardware capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CHAIN_DMA IPC needs the number of playback streams as a start
offset for the dma_id of a capture stream.
This offset can be retrieved on Intel platforms from the GCAP
information, and stored in the sof_ipc4_fw_data structure.
One could argue that the fields added are not really dependent on any
firmware definitions but rather on hardware capabilities, but they are
required for the IPC CHAIN_DMA definitions so adding them in
ipc4_fw_data isn't completely silly.
The CHAIN_DMA IPC is currently only functional on Intel HDaudio DMAs,
and gated by the snd_sof_is_chain_dma_supported() helper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the existing callbacks and mix/match of HDaudio and SoundWire
support.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reuse existing function to get the interface mask and expose it to the
SOF core with a callback - the main user is the IPC4 topology so only
HDaudio platforms provide this callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
IPC4 introduced a 'chain-dma' mode when host and link DMA are
connected by firmware without using a regular pipeline or the ability
to add intermediate connections. This mode is not available on all
platforms and all links, so add a platform-specific callback to help
the SOF ipc4-topology core handle different hardware+firmware
configurations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The chain_dma mode is currently only handled for HDaudio, but can be
used for orther DAIs starting with LunarLake. Move the chain_dma
handling earlier.
Error detection for the chain_dma case for older platforms is handled
at a different level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213101247.28887-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 74ad8ed651 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops")
introduced a new allocation before the upper bounds check in
do_rx_work. As a result A DSP can cause bad allocations if spewing
garbage.
Fixes: 74ad8ed651 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops")
Reported-by: Tim Van Patten <timvp@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213123834.4827-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.
If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.
If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.
Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot.
Link: https://github.com/thesofproject/sof/issues/8721
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware release which going to introduce support for Lunar Lake will
use the documented default topology directory for IPC4:
intel/sof-ipc4-tplg
Change the default path accordingly before sof-bin (sof-firmware) release
includes Lunar Lake firmware and topologies.
Link: https://github.com/thesofproject/sof-docs/blob/master/getting_started/intel_debug/introduction.rst#2-topology-file
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Mengdong Lin <mengdong.lin@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240213080418.21256-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The currently used paths and firmware name reflects the reference firmware
convention:
default_fw_path: intel/avs/{platform_name}
default_lib_path: intel/avs-lib/{platform_name}
default_tplg_path: intel/avs-tplg
default_fw_filename: dsp_basefw.bin
The SOF supports building the firmware for cAVS2.5 platforms using IPC4 and
it is the preferred IPC4 implementation to be used on these devices.
Change the paths and firmware names to reflect this:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240213080418.21256-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We describe tplg_file_name and drv_name using snd_sof_of_mach
array and select correct machine description based on dts compatible
string.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240212125258.420265-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent change in acp_irq_thread() was meant to address a potential race
condition while trying to acquire the hardware semaphore responsible for
the synchronization between firmware and host IPC interrupts.
This resulted in an improper use of the IPC spinlock, causing normal
kernel memory allocations (which may sleep) inside atomic contexts:
1707255557.133976 kernel: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:315
...
1707255557.134757 kernel: sof_ipc3_rx_msg+0x70/0x130 [snd_sof]
1707255557.134793 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp]
1707255557.134855 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp]
1707255557.134904 kernel: ? irq_thread+0xb5/0x1e0
1707255557.134947 kernel: ? __pfx_irq_thread_fn+0x10/0x10
1707255557.134985 kernel: irq_thread_fn+0x23/0x60
Moreover, there are attempts to lock a mutex from the same atomic
context:
1707255557.136357 kernel: =============================
1707255557.136393 kernel: [ BUG: Invalid wait context ]
1707255557.136413 kernel: 6.8.0-rc3-next-20240206-audio-next #9 Tainted: G W
1707255557.136432 kernel: -----------------------------
1707255557.136451 kernel: irq/66-AudioDSP/502 is trying to lock:
1707255557.136470 kernel: ffff965152f26af8 (&sb->s_type->i_mutex_key#2){+.+.}-{3:3}, at: start_creating.part.0+0x5f/0x180
...
1707255557.137429 kernel: start_creating.part.0+0x5f/0x180
1707255557.137457 kernel: __debugfs_create_file+0x61/0x210
1707255557.137475 kernel: snd_sof_debugfs_io_item+0x75/0xc0 [snd_sof]
1707255557.137494 kernel: sof_ipc3_do_rx_work+0x7cf/0x9f0 [snd_sof]
1707255557.137513 kernel: sof_ipc3_rx_msg+0xb3/0x130 [snd_sof]
1707255557.137532 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp]
1707255557.137551 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp]
Fix the issues by reducing the lock scope in acp_irq_thread(), so that
it guards only the hardware semaphore acquiring attempt. Additionally,
restore the initial locking in acp_sof_ipc_irq_thread() to synchronize
the handling of immediate replies from DSP core.
Fixes: 802134c8c2 ("ASoC: SOF: amd: Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240208234315.2182048-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the change in the widget free logic to power down the cores only
when the scheduler widgets are freed, we need to ensure that the
scheduler widget is freed only after all the widgets associated with the
scheduler are freed. This is to ensure that the secondary core that the
scheduler is scheduled to run on is kept powered on until all widgets
that need them are in use. While this works well for dynamic pipelines,
in the case of static pipelines the current logic does not take this into
account and frees all widgets in the order they occur in the
widget_list. So, modify this to ensure that the scheduler widgets are freed
only after all other types of widgets in the widget_list are freed.
Link: https://github.com/thesofproject/linux/issues/4807
Fixes: 31ed8da1c8 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240208133432.1688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series is to redesign existing platform device creation logic
for SoundWire managers and Implement generic functions for SoundWire
manager probe, start and exit sequence which are common for both Legacy
(NO DSP enabled) and SOF stack, and add SoundWire Interface support for
AMD SOF stack (ACP 6.3 based platform).
The patch series was reviewed in
https://github.com/thesofproject/linux/pull/4699
Refactor acp driver pm ops to support SoundWire interface.
When SoundWire configuration is enabled, In case of ClockStopMode,
DSP soft reset should be applied and for rest of the scenarios
acp init/deinit sequence should be invoked.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240129055147.1493853-14-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add code for invoking Soundwire manager helper functions
when SoundWire configuration is selected.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240129055147.1493853-8-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 6c393ebbd7 ("ASoC: SOF: core: Implement IPC version fallback if
firmware files are missing") changed the order of some operations and
the firmware paths are not available anymore at snd_sof_probe() time.
Precisely, fw_filename_prefix is set by sof_select_ipc_and_paths() via
plat_data->fw_filename_prefix = out_profile.fw_path;
but sof_init_environment() which calls this function was moved from
snd_sof_device_probe() to sof_probe_continue(). Moreover,
snd_sof_probe() was moved from sof_probe_continue() to
sof_init_environment(), but before the call to
sof_select_ipc_and_paths().
The problem here is that amd_sof_acp_probe() uses fw_filename_prefix to
compute fw_code_bin and fw_data_bin paths, and because the field is not
yet initialized, the paths end up containing (null):
snd_sof_amd_vangogh 0000:04:00.5: Direct firmware load for (null)/sof-vangogh-code.bin failed with error -2
snd_sof_amd_vangogh 0000:04:00.5: sof signed firmware code bin is missing
snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP firmware -2
snd_sof_amd_vangogh: probe of 0000:04:00.5 failed with error -2
Move usage of fw_filename_prefix right before request_firmware() calls
in acp_sof_load_signed_firmware().
Fixes: 6c393ebbd7 ("ASoC: SOF: core: Implement IPC version fallback if firmware files are missing")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-9-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACP driver for Vangogh platform uses a quirk for Valve Galileo
device to setup a custom firmware loader, which neither requires nor
uses the firmware file indicated via the default_fw_filename member of
struct sof_dev_desc.
Since commit 6c393ebbd7 ("ASoC: SOF: core: Implement IPC version
fallback if firmware files are missing"), the provided filename gets
verified and triggers a fatal error on probe:
[ 7.719337] snd_sof_amd_vangogh 0000:04:00.5: enabling device (0000 -> 0002)
[ 7.721486] snd_sof_amd_vangogh 0000:04:00.5: SOF firmware and/or topology file not found.
[ 7.721565] snd_sof_amd_vangogh 0000:04:00.5: Supported default profiles
[ 7.721569] snd_sof_amd_vangogh 0000:04:00.5: - ipc type 0 (Requested):
[ 7.721573] snd_sof_amd_vangogh 0000:04:00.5: Firmware file: amd/sof/sof-vangogh.ri
[ 7.721577] snd_sof_amd_vangogh 0000:04:00.5: Topology file: amd/sof-tplg/sof-vangogh-nau8821-max.tplg
[ 7.721582] snd_sof_amd_vangogh 0000:04:00.5: Check if you have 'sof-firmware' package installed.
[ 7.721585] snd_sof_amd_vangogh 0000:04:00.5: Optionally it can be manually downloaded from:
[ 7.721589] snd_sof_amd_vangogh 0000:04:00.5: https://github.com/thesofproject/sof-bin/
[ 7.721997] snd_sof_amd_vangogh: probe of 0000:04:00.5 failed with error -2
According to AMD, a combined ".ri" file which includes the code and data
segments cannot be used due to a limitation preventing the code image to
be signed on build time.
Fix the issue by skipping the firmware file test if a custom loader is
being used instead of the generic one.
Fixes: 6c393ebbd7 ("ASoC: SOF: core: Implement IPC version fallback if firmware files are missing")
Co-developed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-8-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Valve's Steam Deck OLED is uniquely identified by vendor and product
name (Galileo) DMI fields.
Simplify the quirk by removing the unnecessary match on product family.
Additionally, fix the related comment as it points to the old product
variant.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver uses kasprintf() to initialize fw_{code,data}_bin members of
struct acp_dev_data, but kfree() is never called to deallocate the
memory, which results in a memory leak.
Fix the issue by switching to devm_kasprintf(). Additionally, ensure the
allocation was successful by checking the pointer validity.
Fixes: f7da88003c ("ASoC: SOF: amd: Enable signed firmware image loading for Vangogh platform")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWmnFEACgkQJNaLcl1U
h9Dzvgf/RfM1g44TeC/hSX0+qdrL6QYg5wPeMWPtV4xgLqx2oqftU9eIcBLHPz03
N1hdutFFqNTR3W5GiTmyV5mLdgJpZBgkYU5dkhXCrlI7xJ6tV7Wsx86Q9ClSmEBH
Z4ZR2oAmCQIt3swshOBvwYUI6MOcG/zSqDBcRQ6t6d98TOkp2m3PPrjEYqEA2ja9
tyr73WXsdammYXZVYPu9oYoNE2Ef6Io5nkyds1F4irCcx1EXiS95cZjF3/OZ9OPP
iGpzVkXvgwb0Jbq+NsBogydsIsSAu4pyNNcu3P9Xcr1rkNqVwz1X1KYvvnSHDqdw
ZbmU6r83dCUpizpgFA4wv8irNn+aKw==
=Rr9L
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.8-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
Warnings related to missing data in firmware manifest have
proven to be too verbose. This relates to description of
DSP module cost expressed in cycles per chunk (CPC). If
a matching value is not found in the manifest, kernel will
pass a zero value and DSP firmware will use a conservative
value in its place.
Downgrade the warnings to dev_dbg().
Fixes: d8a2c98793 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240115092209.7184-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LLP is supported by I2S and SDW platforms but not supported by HDA
platforms. This log is used to notify developer current LLP status
for current device. Since above case is known to developers, the log
is unnecessary and should be removed.
Fixes: 7cb19007ba ("ASoC: SOF: ipc4-pcm: add hw_params")
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240115092209.7184-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWbJ5EACgkQJNaLcl1U
h9CZTwf/c8CPwoKABZear8jiQpZLUhFLuGQwSShPYVZ7XPzzTMp9BwVmd40DCnUi
NeSc22t2UgT0H06nx3QK8sKOhrpQoBQVrIajf2AaxD44TJbsOYGGe4pMh1sXKAMF
c0ybp8uRgsjiv2Y++SBXZLexGC11/b8eTFLV1nTK/i2nygGjbfWSJ9s4PpB9V6cA
nZrQ/p+x/ZwaBejFUnvE06M7GHtCD6lxrB9Q1EmWA4RxcW7RNUtIN5gr16HlaMiC
3gix4mg40llhBFF9s4eBjRBNKL2paiejPZwcYkAC8w+SkZ/roXaeN55g0avmDWyW
AN9o096vaEVWKhZ/jdTHmFVf2PV2Iw==
=rbT5
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
the hdac driver is probed at this point
During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.
On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl
The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:
1. snd_hdac_device_register()
the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
will be a NOP as the module is already loaded
Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:
1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()
This way at the hdac driver probe all parameters will be set in all cases.
Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4add ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/ZYvUIxtrqBQZbNlC@shine.dominikbrodowski.net
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218304
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The sof imx pcm device is a device which should support
double buffering.
Found this issue with pipewire. When there is no
SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will
set headroom to be zero, and because sof pcm device
don't support residue report, when the latency setting
is small, the "delay" always larger than "target" in
alsa-pcm.c, that reading next period data is not
scheduled on time.
With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire
will select a smaller period size for device, then
the task of reading next period data will be scheduled
on time.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1703669263-13832-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
"Empty" dlc might be used on Platform, but "dummy" dlc is not needed
for it. [PATCH 1/5][PATCH 2/5] removes "dummy" dlc from Platform.
Now ASoC have common dummy dlc (= snd_soc_dummy_dlc).
[PATCH 3/5][PATCH 4/5] will use it instead of original dummy dlc.
Many drivers are using below macro
SND_SOC_DAILINK_DEFS(link,
DAILINK_COMP_ARRAY(COMP_CPU(...)),
(X) DAILINK_COMP_ARRAY(COMP_DUMMY()),
DAILINK_COMP_ARRAY(COMP_EMPTY()));
But (X) part will create original dummy dlc.
[PATCH 5/5] will try not to create original dummy dlc, and replace
it to common dummy dlc.
Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler
to avoid race conditions for acquiring hw_semaphore.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://msgid.link/r/20231219112416.3334928-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
We should query FW config if context save is supported, and no need
to reload FW if hda->booted_from_imr and ipc4_data->fw_context_save
are true.
If fw_context_save is defined by fw, driver can skip library reload on
d3 exit or reload library.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver queries fw_context_save feature when fw is ready and can skip
library reload with this feature since library is saved in persistent
memory. The default value of fw_context_save is true unless fw reports
false.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
the hdac driver is probed at this point
During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.
On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl
The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:
1. snd_hdac_device_register()
the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
will be a NOP as the module is already loaded
Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:
1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()
This way at the hdac driver probe all parameters will be set in all cases.
Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4add ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add yet another PCI ID - the hardware shares the same descriptors as
MTL but we use a dedicated firmware binary file to allow for different
signature keys.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial copy/paste from MTL was incorrect, the hardware is
different and requires different descriptors along with a dedicated
firmware binary.
Fixes: 3851831f52 ("ASoC: SOF: Intel: pci-mtl: use ARL specific firmware definitions")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 505c83212d.
This is not an official topology from the SOF project. Topologies are
named based on the card configuration and are NOT board specific.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20231205220131.2585913-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Header alignment with firmware, addition of new token and partial
match filters.
Buffer flags have been in firmware for ages but were never fully
implemented in the topology/kernel system. This commit finishes off the
implementation.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We use partial match for connecting DAI link and DAI widget. We need to
use partial match for disconnecting, too.
Fixes: fe88788779 ("ASoC: SOF: topology: Use partial match for connecting DAI link and DAI widget")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 014fdeb0d7 ("ASoC: SOF: Move sof_of_machine_select() to
sof-of-dev.c from sof-audio.c") caused a circular dependency between
the snd_sof and snd_sof_of modules:
depmod: ERROR: Cycle detected: snd_sof -> snd_sof_of -> snd_sof
depmod: ERROR: Found 2 modules in dependency cycles!
Move the function back with sof_machine_select().
Fixes: 014fdeb0d7 ("ASoC: SOF: Move sof_of_machine_select() to sof-of-dev.c from sof-audio.c")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231204033549.2020289-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the base_cfg to struct sof_ipc4_gain_data. This struct
describes the message payload passed to the firmware via the mailbox.
It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the IPC message part as struct sof_ipc4_src_data. This struct
describes the message payload passed to the firmware via the mailbox.
It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The main aim of the series is to provide a mechanism to fallback to 'older' IPC
versions in case the desired one is missing either a firmware or topology file.
It is going to make the life of users and distributions if we are going to
start transition existing IPC3 platforms to IPC4 (CAVS2.5) and we might have
missed some topology file to convert for example.
In that case the kernel will fallback to IPC3 without audio regression.
To be able to support this we needed to change the probe sequence to know the
topology filename earlier and check if it is present in the filesystem.
No functional changes for now, the default IPC versions have not been changed.
This module ID will be used for module performance automatic analysis
for different modules, module name, module ID and module instance ID
will be combined as a new generated ID for current module, this ID
will be further used by analysis tools to identify current module.
Take below case as example:
0x030006 gain.11.1
3 is module instance ID, 6 is module ID and gain.11.1 is module name.
For pipeline widget print, keep as it is.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231129122234.14515-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the added exception handling support if the firmware fails to boot
up we are trying to do a panic dump from the telemetry slot. The slot
offsets would have been configured only after receiving the FW_READY
message which makes this panic dump unusable for early boot failures.
With IPC4 the DSP window offsets are at standard places unlike IPC3 where
the offsets needs to be queried from the FW_READY message.
Move the offset configuration to sof_ipc4_init from the fw_ready handler.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231129122805.10635-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a firmware file is missing for the selected IPC type then try to switch
to other supported IPC type and check if that one can be used instead.
If for example a platform is changed to IPC4 as default version but the
given machine does not yet have the needed topology file created then we
will fall back to IPC3 which should have all the needed files.
Relocate the sof_init_environment() to be done at a later phase, in
sof_probe_continue().
This will only have changes in behavior if
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE is enabled (Intel HDA platforms) by
not failing the module probe, but it is not going to be different case
compared to for example failed firmware booting or topology loading error.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Manage the ipc4_data allocation in code instead of devm since the ops_init
might be called more than once due to IPC type fallback.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sof_init_environment() as a helper function to contain path and ops
initialization.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core is now using the information from ipc_file_profile_base to create
the paths for the loadable files, no need to set it in here anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core is now using the information from ipc_file_profile_base to create
the paths for the loadable files, no need to set it in here anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core is now using the information from ipc_file_profile_base to create
the paths for the loadable files, no need to set it in here anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the information stored in ipc_file_profile_base by platforms to
construct the paths, filenames that are going to be used to load the
firmware and topology files.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store the default IPC type and the overrides to ipc_file_profile_base
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store the default IPC type and the firmware and topology path overrides to
ipc_file_profile_base
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store the default IPC type and the firmware and topology path overrides to
ipc_file_profile_base
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Relocate the machine handling functions from sof-audio.c to core.c to
maintain code separation.
While doing the move, drop the redundant
IS_ERR_OR_NULL(plat_data->pdev_mach) check from
sof_machine_unregister()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the sof_of_machine_select() function to sof-of-dev.c file and provide
an inline stub in case of non OF builds.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
trace_filter_parse() allocs memory for *out and when
-ENOMEM is returned, caller function, dfsentry_trace_filter_write()
trying to freed this memory.
After this patch, the memory is freed in trace_filter_parse()
before -EINVAL returned. In caller function removed kfree(elms)
from error label
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Link: https://lore.kernel.org/r/20231116220102.2097-2-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To provide option for selecting different bit-per-sample than just the
maximum one, use the new format calculation mechanism.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-13-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of directly changing the GPROCEN/PIE bits in PPCTL we should use
the existing helper hda_dsp_ctrl_ppcap_enable() and
hda_dsp_ctrl_ppcap_int_enable() helpers for clarity.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231127104313.16661-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Call snd_sof_dsp_dbg_dump() with the same flags/dump_msg
as used in function hda_loader.c/cl_dsp_init().
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127105235.30071-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The control change notification is sent as module notification with a
standardized event_id (higher 16 bit is 0xA15A).
Add generic code to handle the module notification and invoke the control
update callback if the notification is an ALSA kcontrol change message.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124150853.18648-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement the sof_ipc_tplg_control_ops.update function to support a control
change notification from the firmware on switch or enum control types.
Based on the module notification message content, look up the swidget, then
the scontrol which was the source of the notification then if the message
contains the changed values update the cached values.
If only a notification without values received, marked the control as dirty
and on next read access fetch the new values from the firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124150853.18648-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_ipc4_find_swidget_by_ids() can be used to find the swidget of a
module instance.
The lookup parameters are the module_id and the instance_id.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124150853.18648-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the machine compatible and topology filename for the Google Steelix
MT8186 Chromebook to load the correct SOF topology file.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123084454.20471-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function has multiple return points at which it is not released
previously allocated memory.
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231116213926.2034-2-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:
This is used for configuring MICFIL PDM with i.MX8MPlus. Tested
with 8MIC-RPI-MX8 microphone array.
To prevent confusion on the follow-up platform, it is necessary to
remove any unused variables within the struct mtk_adsp_chip_info.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103095433.10475-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there are some variables that are no longer being used, we remove
the code that was implemented for those variables.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103095433.10475-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there are some variables that are no longer being used, we remove
the code that was implemented for those variables.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103095433.10475-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we only support configuration for number of channels and
sample rate.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231109135900.88310-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will allow creating of PDM DAI links.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231109135900.88310-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of fixes that have come in during the merge window, the
majority of this is driver specific with one core fix for handling of
DAPM clock widgets when a name prefix is specified for the card - the
name should not be applied to the clock name we request from the clock
API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVLuWYACgkQJNaLcl1U
h9D0OQf/dauiR5PdVTxXdxxNB3qygA8MVOIqyVv0D0FzjjffuVvVhr1c0gkiIa+R
isO8esWr7iM+aM0/Z5XleAFckTWLSi9gPQ+NvRQKGCLUh/MRBVIFkJnBvLx6frRE
h6Ax9duai1RZfs+uqOMfUlQFN13y2ew4dn64vHZNu4f/Lqaskh4hrB4bn9jQhM9I
bnmaCo9DvecS1TlJrewF1Ie2cvfR1DM87IvvkfaRtP2hW7oerURYm7myWitu/fr+
Hlpj9BxTLhbJlFR13kGtm+HNXsWyLjO4NdAVUxC6aMHCQ4vfTy61ojfq4CZKYN0J
ZpRoeG+4mP/WjqqaaN7hJq/USw4BxQ==
=iZZQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.7-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
A collection of fixes that have come in during the merge window, the
majority of this is driver specific with one core fix for handling of
DAPM clock widgets when a name prefix is specified for the card - the
name should not be applied to the clock name we request from the clock
API.
Fix typo s/depndent/dependent
Fixes: 6e9548cdb3 ("ASoC: SOF: Convert the generic IPC flood test into SOF client")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231031112218.79136-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmU/rAQACgkQJNaLcl1U
h9AXVwf/SwWrxTus3+O2hS5rwusjqQBn1t2mzlnxsYNVCYGBcjOpMGL4HrJzn++e
DJXoMyWis5FNKFWyPtKMGE1kZYdUUE/g7LpZOBew4P47nBv6SQWRvUxPfoq8mdOg
Xb4+kjBzTq1dhwZnZPvNdsknvM7cLfx/lyo2vUJR4peDL0rzgnx72fhRZAjzh2OH
CSz69aTjpliqikp+V7JVFYf2yma2LjTOCL2saiIF/PcxsqUUa73XTggg610EPY+R
pOFb2MBRDbZuJrETbaiytLwtcPuvrpiHRHhxuClsjHGVTDbGfE7GzePS+yUu66y9
LO8oAl7kJebw+WWffIOoL2IjXcG9tA==
=nn11
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.7
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
Like the change we've done for remove callback, the newly introduced
remove_late callback should be changed to void return, too.
Fixes: 17baaa1f95 ("ASoC: SOF: core: Add probe_early and remove_late callbacks")
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231023153605.863-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DSP data bin can be loaded in to ACP DRAM or ACP SRAM.
Add conditional check for ACP DRAM usage for data bin loading.
Rename DRAM base address macro to have symmetry.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20231020062822.3913760-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Chromebooks do not populate the product family DMI value resulting
in firmware load failures.
Add another quirk detection entry that looks for "Google" in the BIOS
version. Theoretically, PRODUCT_FAMILY could be replaced with
BIOS_VERSION, but it is left as a quirk to be conservative.
Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20231020145953.v1.1.Iaf5702dc3f8af0fd2f81a22ba2da1a5e15b3604c@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUy6X8ACgkQJNaLcl1U
h9Cv7Qf+PO4ucl/rFITWAp2Ta9fw7Z5J6UCiXiR54TPgAiLJrpKSi3rbYTXjO90Y
1NNOdoMKr109zdOpdSZI7EX0GgWQbGbdB40nxESdTcojAloRH0jt4RaF7G7B7+86
b8PGlVPLLV/4zFf9f2gpEKPcKhRRRKYOBIEB+amfjWpdXVrqPD3zS/S16Q3Hn4Gy
Fx9b9X/lVDG9uqJomHpunEdViZjkm5CCNzdyAhHH99afiqSe//pevx6/FpzAHyng
AZgE9Yfq4Xw4pdzDdGVfYC+L1GZiHIDRzsusz6aPA5nrMhSn0ru8PMGtmQQTzyhb
PLYw0OW8cWymfqwal8wrNGJfSZ8IGA==
=lN5P
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.7
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
[ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec
drivers are resolved here -- tiwai ]
Now that all drivers have moved from modprobe loading to
handling -EPROBE_DEFER, we can remove the argument again.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-14-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we can use -EPROBE_DEFER, it's no longer required to spin off
the snd_hdac_i915_init into a workqueue.
Use the -EPROBE_DEFER mechanism instead, which must be returned in the
probe function.
The previously added probe_early can be used for this,
and we also use the newly added remove_late for unbinding afterwards.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-13-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Xe is a new GPU driver that re-uses the display (and sound) code from
i915. It's no longer possible to load i915, as the GPU can be driven
by the xe driver instead.
The new behavior will return -EPROBE_DEFER, and wait for a compatible
driver to be loaded instead of modprobing i915.
Converting all drivers at the same time is a lot of work, instead we
will convert each user one by one.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-8-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hda_codec_i915_init() errors are ignored in
hda_init() so it can never return -EPROBE_DEFER.
Fix this before we move the call to hda_init() from the
deferred probe to early probe.
While at it, also fix error handling when hda_dsp_ctrl_get_caps
fails.
Suggested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-5-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch moves the initial parts of the probe to the probe_early()
callback, which provides a much faster decision on whether the SOF
driver shall deal with a specific platform or yield to other Intel
drivers.
This is a limited functionality change, the bigger change is to move
the i915/Xe initialization to the probe_early().
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-4-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing DSP probe may be handled in a workqueue to allow for
extra time, typically for the i915 request_module and HDAudio codec
handling.
With the upcoming changes for i915/Xe driver relying on the
-EPROBE_DEFER mechanism, we need to have a first pass of the probe
which cannot be pushed to a workqueue. Introduce 2 new optional
callbacks.
probe_early is called before the workqueue runs. remove_late may be
called from the workqueue if load is unsuccesful, but will otherwise
be called on module unload.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-3-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In an effort to not call sof_ops_free twice, we stopped running it when
probe was aborted.
Check the result of cancel_work_sync to see if this was the case.
Fixes: 31bb7bd9ff ("ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful")
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We don't use the returned value and return 0 anyways, let's follow the
example of platform drivers and simplify the definitions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231012191850.147140-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we have notifications with payload (kcontrol change
notifications), it is time to add the payload dump on the rx path as well.
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012191850.147140-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the existing IPC support, the reply to each IPC message is handled in
an IRQ thread. The assumption is that the IRQ thread is scheduled without
significant delays.
On an experimental (iow, buggy) kernel, the IRQ thread dealing with the
reply to the last IPC message before powering-down the DSP can be delayed
by several seconds. The IRQ thread will proceed with register accesses
after the DSP is powered-down which results in a kernel crash.
While the bug which causes the delay is not in the audio stack, we must
handle such cases with defensive programming to avoid such crashes.
Call synchronize_irq() before proceeding to power down the DSP to make
sure that no irq thread is pending execution.
Closes: https://github.com/thesofproject/linux/issues/4608
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012191850.147140-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Split out firmware definitions for Intel Arrow Lake platforms.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Arun T <arun.t@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012191850.147140-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
The SOF platform drivers all use either sof_of_remove() or
sof_acpi_remove() which both return zero unconditionally. Change these
functions to return void and the drivers to use .remove_new(). There is
no semantical change.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231009155945.285537-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When IPC3 is not selected, sof-client.c still makes a hard-coded
reference to an IPC3-specific function:
ERROR: modpost: "sof_ipc3_do_rx_work" [sound/soc/sof/snd-sof.ko]
undefined!
Fix by making the code conditional.
Closes: https://github.com/thesofproject/linux/issues/4581
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231006084041.18100-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pipeline priority is set in topology and driver should sort pipeline
based on priority for trigger order.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231006084454.19170-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver set pipeline priority according to priority setting in topology.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231006084454.19170-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: f9efae9549 ("ASoC: SOF: ipc4-topology: Add support for base config extension")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZQSr15AYJpDpipg6@work
Signed-off-by: Mark Brown <broonie@kernel.org>
Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure as mentioned in below scenario.
- Load snd_sof_amd_rembrandt
- Play or Record audio
- Stop audio
- Unload snd_sof_amd_rembrandt
- Reload snd_sof_amd_rembrandt
If acp_clkmux_sel register field is set, then clock source will be
set to ACP ACLK when ACP enters D0 state.
During stream stop, if there is no active stream is running then
acp firmware will set the ACP ACLK value to zero.
When driver is reloaded and clock source is selected as ACP ACLK,
as ACP ACLK is programmed to zero, firmware loading will fail.
For RMB platform, remove the clock mux selection field so that
ACP will use internal clock source when ACP enters D0 state.
Fixes: 41cb85bc4b ("ASoC: SOF: amd: Add support for Rembrandt plaform.")
Reported-by: coolstar <coolstarorganization@gmail.com>
Closes: https://github.com/thesofproject/sof/issues/8137
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230927071412.2416250-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sf71fo32.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0n4p8uh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sf7kp8um.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tts0p8ur.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
When a firmware crashes it creats a panic information into a telemetry
slot. The panic format is defined by Zephyr, includes stack and
additional information to help to identify the reason for the crash.
Part of the firmware exception handling the firmware also sends an
EXCEPTION_CAUGHT notification.
This series implements the kernel side handling of the exception: print
information into the kernel log export the whole telemetry slot to user
space for tools extract additional information from the panic dump.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Currently IPC4 has no notion of a switch or enum type of control which
is a generic concept in ALSA.
The generic support for these control types will be as follows:
- large config is used to send the channel-value par array
- param_id of a SWITCH type is 200
- param_id of an ENUM type is 201
Each module need to support a switch or/and enum must handle these
universal param_ids. The message payload is described by struct
sof_ipc4_control_msg_payload.
HDA patch loader is supported by legacy HDA driver. Implement it on
ASoC HDA driver, too.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230919083209.1919921-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new SOF_IPC_TYPE_3 in core code.
No functional changes, just renaming.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new SOF_IPC_TYPE_3, SOF_IPC_TYPE_4 in core code.
No functional changes, just renaming.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new SOF_IPC_TYPE_3 in core code.
No functional changes, just renaming.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new SOF_IPC_TYPE_3 in core code.
No functional changes, just renaming.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new SOF_IPC_TYPE_3, SOF_IPC_TYPE_4 in core code.
No functional changes, just renaming.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the Intel from the IPC type Kconfig option
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clarify the description of the ipc_type module parameter and drop the Intel
CAVS in favor of IPC4.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919104226.32239-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enum controls use generic param_id and a generic struct where the data
is passed to the firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919103115.30783-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Volume controls with a max value of 1 are switches.
Switch controls use generic param_id and a generic struct where the data
is passed to the firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919103115.30783-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently IPC4 has no notion of a switch or enum type of control which is
a generic concept in ALSA.
The generic support for these control types will be as follows:
- large config is used to send the channel-value par array
- param_id of a SWITCH type is 200
- param_id of an ENUM type is 201
Each module need to support a switch or/and enum must handle these
universal param_ids.
The message payload is described by struct sof_ipc4_control_msg_payload.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919103115.30783-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver will receive exception IPC message and process it by
snd_sof_dsp_panic.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Get the FW panic information from telemetry data in memory window and
dump it to kernel log. The old platforms before CAVS 2.5+ don't support
it since there is no support in FW for them.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dump dsp stack with sof_ipc4_intel_dump_telemetry_state since dsp stack
information is included by telemetry data. This also supports lnl since
the mtl code is reused.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Telemetry data is decoded based on intel xtensa design and printed in
kernel log by sof debug framework.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The exception node is created when FW is ready and clear to
zero when FW post boot.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Core dump includes hardware platform information, cpu registers and
exception call stack. FW saves core dump to telemetry slot in shared
memory window for host in the event of FW exception. This patch creates
exception node in debugfs for user to dump telemetry data.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently IPC4 supports GDB slot, telemetry slot and
debug slot. This helper function will be used to get
the slot offset in debug windows for further processing.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The macro definitions of debug slot can be used by gdb, telemetry
and mtrace log, so move these definitions to header.h from mtrace.
Then these macro definitions can be shared
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Xtensa platform ar0 is for caller address and ar1 is for stack
address. The ar register dump can be used to rebuild call stack with
FW elf file by debug tools.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919092416.4137-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
If the copier supports a single format on the DAI side we should fixup the BE
dailink to use this single format.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series implements support for split library loading to comply with the HDA
DMA programming sequence recommendation, which is:
1. DSP side DMA programming and GEN bit set to 1
2. host side DMA programming and RUN bit set to 1
The SOF support for library loading is based on this sequence, backwards
compatibility with older reference firmware is supported (where only the
LOAD_LIBRARY message is supported).
All the fail paths during probe will free up the ops, on remove we should
only free it if the probe was successful.
Fixes: bc433fd76f ("ASoC: SOF: Add ops_free")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230915124015.19637-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
20s seems unnecessarily large for the DSP init timeout. This coupled with
multiple FW boot attempts causes an excessive delay in the error path when
booting in recovery mode. Reduce it to 0.5s and use the existing
HDA_DSP_INIT_TIMEOUT_US.
Link: https://github.com/thesofproject/linux/issues/4565
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230915134153.9688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a certain sequence needs to be followed when configuring the HDA
DMA in host and DSP.
The firmware provides a way to handle this two stage sequencing by
splitting the library loading into two stage:
1st stage: LOAD_LIBRARY_PREPARE message
the lib_id is 0, used to configure the DMA on DSP side
2nd stage: LOAD_LIBRARY message
both dma_id and lib_id is valid, used for the actual transfer of
the library
In case a firmware without support for this two stage loading is used then
the second stage message will trigger the loading and the first stage will
return with error, which is ignored by the kernel.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Intel platforms there is a strict order requirement for the DMA
programming:
DSP side configures the buffer and sets the GEN bit
Host side sets the RUN bit.
In order to follow this flow, a new global message type has been added to
prepare the DSP side of the DMA:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP side sets its buffer and sets the GEN bit
Host sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
It is up to the platform code to use the new prepare stage message and how
to handle the reply to it from the firmware, which can indicate that the
message type is not supported/handled.
In this case the kernel should proceed to the LOAD_LIBRARY stage assuming
a single stage library loading:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP replies that the message type is not supported/handled
Host acknowledges the return code and sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FIFOS (FIFO Size) field is in bit 0-15 of the register.
Use the defined mask instead of a magic number for the FIFOS value
masking in hda_dsp_stream_hw_params().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The status code 2 and 15 can be translated to -EOPNOTSUPP, so convert them
to a meaningful error number.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a copier exposes a single format, we can fixup the BE dailink with
that format. This is helpful when some codec have format restrictions and
e.g. don't support a 32-bit format. In that case, the copier output
formats mirror that restriction in the topology file.
An alternate solution was suggested earlier using a dedicated topology
token. When specified, the token would be used to fix-up the dailink. The
main reason why this solution was chosen is that there is a risk of a
disconnect between token definition and copier format. With a single piece
of information as suggested in this patch, there are fewer risks of a bad
configuration.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230915093507.7242-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We will use the sof_ipc4_copier_is_single_format() function to check if a
ipc4 copier has single format available in ipc4-pcm.c in the next patch.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230915093507.7242-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the out label to dump the message payload when the IPC message fails.
The payload contains important information on what might have caused the
error in firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230914125115.30904-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case the widget setup fails we should only decrement the core usage
count if the sof_widget_free_unlocked() has not been called as part of
the error handling.
sof_widget_free_unlocked() calls snd_sof_dsp_core_put() and the additional
core_put will cause imbalance in core usage count.
Use the existing use_count_decremented to handle this issue.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230914124725.17397-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
available_fmt is a pointer.
Fixes: 4fdef47a44 ("ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230914132504.18463-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New code uses ENOTSUPP as per checkpatch recommendation:
ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230914124943.24399-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.
struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.
PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.
sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.
sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.
The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be
accessed by both ACP firmware and driver. This register contains register
bits corresponds to host to dsp interrupts and vice versa.
when dsp to host interrupt is reported, only clear dsp to host
interrupt bit in DSP_SW_INTR_STAT_OFFSET.
Fixes: 2e7c6652f9 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to scratch memory persistence, Once the DSP panic is reported, need to
clear the panic mask after handling DSP panic. Otherwise, It results in DSP
panic on next reboot.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Few AMD platforms require ACP ACLK as clock source.
Add conditional check for clock mux selection register for
switching between internal clock and ACP ACLK.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add module parameter for firmware debug. If firmware debug
flag is enabled, clear the fusion stall bit which is required
for enabling firmware debugging through JTAG.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously ACP SOF firmware used to enable the ACP external
global interrupt register.
This will restrict to report ACP host interrupts only after
firmware loading is successful.
This register needs to be set from host driver to handle
other ACP interrupts(SoundWire Interrupts) before loading
the ACP firmware.
Add field for external interrupt enable register in acp descriptor
structure and enable the external interrupt enable register.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During initial development time for RN platform, when SHA
dma gets completed, SHA DMA engine used to raise the ACP interrupt.
In ACP interrupt handler, SHA DMA interrupt got handled.
Currently SHA DMA compleition is verified by checking
transfer count using read poll time out logic.
Remove unused SHA dma interrupt handling code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new module parameter ipc4_ignore_cpc which can be used to force the
kernel to ignore the queried CPC value for all firmware modules and use 0
instead.
The CPC lookup is still done to report missing configurations and the
debug print is going to be different to be explicit that the CPC is ignored
and what was the value we would have used.
The CPC value is sent to the firmware with the MOD_INIT_INSTANCE message
and it is used by the firmware as a parameter for clock scaling.
The flag is intended to be used only when there is a need to validate the
firmware behavior regarding to clock scaling since the 0 CPC value will
force the DSP to run in full speed, disabling the scaling and provides
additional counter point to rule out clock management related issues.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822065419.24374-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The SRC component in a pipeline provides flexibility on the sampling
rate which was not handled previously. This series will improve the
kernel side with the needed logic to be able to deal with the SRC type
of components in pipelines.
If the copier has only output valid_bits across all its output
formats, the reference for selecting the output format must be set that
instead of the valid_bits from the selected input format.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we walk the list of connected widgets from the source to the sink
to prepare all widgets, the pipeline_params must be modified to reflect
the output audio format at each widget. But, the copier only modifies
the sample format in the pipeline_params. So, fix it to also modify the
rate and channels.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For playback, the SRC sink rate must be configured based on the requested
output format which is restricted to only handle DAI's that support a
single audio format for now. For capture, the SRC module should convert
the rate to match the rate requested by the PCM hw_params.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the pipeline_params based on the SRC output format and set the
sink_rate in the IPC data.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The call to snd_sof_find_spcm_dai() could return NULL,
add nullable check for the return value to avoid null
pointer defenrece.
Fixes: 7cb19007ba ("ASoC: SOF: ipc4-pcm: add hw_params")
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230816133311.7523-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Li Zetao <lizetao1@huawei.com>:
This patch set use the helper function devm_kmemdup() to replace
devm_kmalloc + memcpy, which is the same as implementing the function
separately.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The use of the widget name as a prefix for the kcontrol name is quite
useful in the case of multiple pipelines going to the same endpoint,
but it's overkill in simpler cases.
This patchset extends the existing DAPM code to drop the widget name
prefix and make the kcontrol names simpler when there's no possible
ambiguity, e.g. "gain.2.1 Main Playback Volume" becomes just "Main
Playback Volume".
Existing HDA stream creation is split into two
for loops for capture and playback, but most of
the code in the two for loops are duplicated.
This patch refactors HDA stream creation with a
single for loop, thus remove code duplication.
No functional change in this patch.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231519.79051-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds SOF_TKN_COMP_NO_WNAME_IN_KCONTROL_NAME token, and copies the
token's tuple value to the no_wname_in_kcontrol_name flag in struct
snd_soc_dapm_widget.
If the tuple value for the token in the topology is true, then the
widget name is not added to the mixer name. In practice "gain.2.1 Post
Mixer Analog Playback Volume" becomes just "Post Mixer Analog Playback
Volume".
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814232325.86397-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230810114738.2103792-3-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
./sound/soc/sof/intel/lnl.c: hda.h is included more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230810005555.4610-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns (or errors with CONFIG_WERROR):
sound/soc/sof/intel/hda.c:423:6: error: variable 'chip' is uninitialized when used here [-Werror,-Wuninitialized]
423 | if (chip && chip->check_sdw_wakeen_irq)
| ^~~~
sound/soc/sof/intel/hda.c:418:39: note: initialize the variable 'chip' to silence this warning
418 | const struct sof_intel_dsp_desc *chip;
| ^
| = NULL
1 error generated.
Add the missing initialization, following the pattern of the other irq
functions.
Fixes: 9362ab78f1 ("ASoC: SOF: Intel: add abstraction for SoundWire wake-ups")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230809-intel-hda-missing-chip-init-v1-1-61557ca6fa8a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_ipc4_update_resource_usage() call updates the CPC value in basecfg
and it must be done prior to making a copy of the copier configuration
for the init message.
Other module types do the resource update as last step or in case of a
process module at the correct time, before the memcpy.
Fixes: d8a2c98793 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230809125656.27585-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With IPC3, we reset hw_params during the stop trigger, so we should also
clean up the link DMA during the stop trigger.
Fixes: 1bf83fa665 ("ASoC: SOF: Intel: hda-dai: Do not perform DMA cleanup during stop")
Closes: https://github.com/thesofproject/linux/issues/4455
Closes: https://github.com/thesofproject/linux/issues/4482
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217673
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230808110627.32375-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset first fixes a number of errors made in the hda-mlink
support, then adds Lunar Lake definitions. The main contribution is
the hda-dai changes where the HDaudio DMA is now used for SSP, DMIC
and SoundWire. In previous hardware the GPDMA (aka DesignWare) was
used and controlled by the audio firmware. The volume of code is
minimized with the abstraction added in previous kernel cycles.
Due to cross-dependencies between ASoC and SoundWire trees, the full
support for jack detection will be deferred to the next kernel
cycle. There's not much point to ask for a sync of the two trees to
support one patch for each tree - we are at -rc5 already.
When using more than one sublink for amplifier aggregation, we need to
add the sublink info to debug the programming sequences.
No functional change, only additional precisions in the log.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A pipeline is identified by two indices: 'instance_id' and 'pipeline_id'
This is clearly seen in kernel logs when creating a pipeline
"Create widget pipeline.20 instance 0 - pipe 20 - core 0"
but other logs are less clear
"ipc4 set pipeline 1 state 4"
Change definitions and logs to make sure the logs clearly identify
which of the two indices are used in state transitions.
No functional change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The solution used before LunarLake relies on a 'Multi-gateway'
firmware configuration. This is no longer needed with the DMA hardware
handling multiple links directly. To avoid adding a platform-specific
quirk in the generic IPC4 code, this patch resets the device count
when fetching the stream context.
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to retrieve the current value to deal with the HDAudio
WAKEEN/WAKESTS setup.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code cannot work for LunarLake, let's add a layer of
abstraction.
No functional change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These callbacks are just wrappers to keep the code relatively clean.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During the hw_params and hw_free stages, we need to map the stream tag
and channels in the PCMSyCM registers.
The trigger callback is just a wrapper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Same abstraction as SSP/DMIC, with only the get_hlink helper changing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we have multiple CPU DAIs in a dailink, typically for SoundWire
aggregated solutions with amplifiers on multiple links, we only want
to allocate one HDaudio stream_tag. The simplest solution is to
allocate the hext_stream/stream_tag for the DAI with index 0 in the
dailink, and reuse the same stream for all other CPU DAIs.
This assumption relies on serialization of DAIs by the ASoC core,
where all CPU DAIs are handled in a loop.
The stream release follows the same idea of releasing the tag for the
first DAI only. Ideally we would want the loop to be handled in
reverse-order to summetry, but there is no risk of reusing a
stream_tag which is no longer valid.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can reuse the same helpers as for SSP, with just the link type
being different.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new ops for SSP.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DMA widget ops are almost similar to the HDaudio ones, with the
exception of codec_dai_set_hext_stream() which is not relevant and the
format calculation which isn't dependent on the codec dai.
The DMA ops can be selected only starting with ACE_2_0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the LunarLake hardware, the default IP ownership changed to the
host driver, instead of the firmware in previous generation.
In the absence of any capability negotiation, we need to assume a
fixed partitioning between host driver and firmware. The OFLEN bit
needs to be set as early as possible for resources handled by the
firmware, since we can't control when the firmware might try to access
the resources.
For now DMIC and SSP are handled by the DSP firmware. SoundWire is a
separate case, the OFLEN bit can be set when starting-up and resuming
the aux device for each link.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It was just a matter of time before we found a case where we needed
separate ops for MTL and LNL. For LNL we need to set the DMIC/SSP
OFLEN bit in the probe and resume steps, and this can only be done
cleanly with separate ops.
The function prototypes in mtl.h were added in the same order as their
implementation in mtl.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add initial support for Lunarlake. For now only HDAudio interfaces are
supported, DMIC/SSP/SoundWire require additional work so that the DAIs
reuse the HDaudio DMA stream allocation.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All interfaces are accessible without the DSP and rely on the HDaudio
DMA only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial code had a logic flaw where the gateway config length kept
increasing after each playback/capture trigger, with the DMA config
TLV being added at every call of sof_ipc4_prepare_copier_module()
This didn't cause any issues with regular playback/capture, but this
was flagged as an error by firmware in the case of multiple amplifiers
on different links.
Fixes: a0659f81c3 ("ASoC: SOF: ipc4-topology: add DMA config TLV to IPC data")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a pipeline contains multiple DAI widgets, the pipe_widget is not
set up except for the first DAI. This result in the pipe_widget having
a default instance 0, which can conflict with another real the
pipeline instance 0 and leads to spurious transitions.
This patch makes sure the instance_id is properly initialized to a
-EINVAL value.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Likely a combination of copy-paste and test coverage problem. Oops.
Fixes: 87a6ddc0cf ("ASoC: SOF: Intel: hda-mlink: program SoundWire LSDIID registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HCHAN parameter should be the highest channel number, not the
channel count.
While we're at it, handle LCHAN with the dual __ffs helper.
Fixes: ccc2f0c1b6 ("ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here hdr is a pointer, and we should measure the size of
struct sof_ipc_cmd_hdr.
Fixes: 12c41c779f ("ASoC: SOF: Refactor rx function for fuzzing")
Signed-off-by: Xia Fukun <xiafukun@huawei.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230807075118.128122-1-xiafukun@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To prevent incorrect access between the host and DSP sides, we need to
modify DRAM as a non-cache memory type. Additionally, we can retrieve
the size of shared DMA from the device tree.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Kuan-Hsun Cheng <Allen-KH.Cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230803075028.32170-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
GCC11 provides an '-fanalyzer' static analysis option which does not
provide too many false-positives. This patch cleans-up known
problematic code paths to help enable this capability in CI. We've
used this for about a month already.
For MediaTek AFE, DAI DMA can support different bitwidths compared to
the BE DAI. Therefore, it is preferable to obtain the BE frame format
from the DAI_CONFIG.
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move existing function in common library to make sure the code can be
reused by other SoC vendors.
No functionality change outside of the move and added prefix.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Start removing Intel-specific arguments to make that function usable
by other SOC vendors.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports a possible NULL
pointer dereference.
sound/soc/sof/topology.c:1136:21: error: dereference of NULL ‘w’
[CWE-476] [-Werror=analyzer-null-dereference]
1136 | strcmp(w->sname, rtd->dai_link->stream_name))
The code is rather confusing and can be simplified to make static
analysis happy. No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/ reports an issue with memcpy:
sound/soc/sof/ipc3.c: In function ‘ipc3_wait_tx_done’:
sound/soc/sof/ipc3.c:309:33: error: use of NULL ‘reply_data’ where
non-null expected [CWE-476] [-Werror=analyzer-null-argument]
309 | memcpy(reply_data, msg->reply_data,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
310 | msg->reply_size);
The finding is legit with this call:
return sof_ipc3_tx_msg(sdev, &pm_ctx, sizeof(pm_ctx), NULL, 0, false);
Static analysis has no way of knowing that the reply will be zero-sized.
Add a check to only do the memcpy if the reply size is not zero and
the destination pointer is not NULL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/ reports several NULL pointer
dereference paths.
sof_ipc4_probe_get_module_info() can return a NULL value, but it's
only tested in the init state. Static analyzers cannot know the probe
state machine and hence flags a potential issue for all calls of that
function.
Squelch these errors by adding the same check consistently.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-15-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current code references 0x1a98 which is BXT-M (not -T as it is
commented) and it's an RVP, BXT-M B0 to be specific. From what we know
no BXT is available on market.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This doesn't check how many bytes the simple_write_to_buffer() writes to
the buffer. The only thing that we know is that the first byte is
initialized and the last byte of the buffer is set to NUL. However
the middle bytes could be uninitialized.
There is no need to use simple_write_to_buffer(). This code does not
support partial writes but instead passes "pos = 0" as the starting
offset regardless of what the user passed as "*ppos". Just use the
copy_from_user() function and initialize the whole buffer.
Fixes: 671e0b9005 ("ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/74148292-ce4d-4e01-a1a7-921e6767da14@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmS0at0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG6m8H/RZCd2DWeM94CgK5
DIxNLxu90PrEcrOnqeHFJtQoSiUQTHeseh9E4BH0JdPDxtlU89VwYRAevseWiVkp
JyyJPB40UR4i2DO0P1+oWBBsGEG+bo8lZ1M+uxU5k6lgC0fAi96/O48mwwmI0Mtm
P6BkWd3IkSXc7l4AGIrKa5P+pYEnm0Z6YAZILfdMVBcLXZWv1OAwEEkZNdUuhE3d
5DxlQ8MLzlQIbe+LasiwdL9r606acFaJG9Hewl9x5DBlsObZ3d2rX4vEt1NEVh89
shV29xm2AjCpLh4kstJFdTDCkDw/4H7TcFB/NMxXyzEXp3Bx8YXq+mjVd2mpq1FI
hHtCsOA=
=KiaU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS0zgsACgkQJNaLcl1U
h9C8Zwf9HZwtLMlojz17PYAkErGIwAGzwH8jsBmWnOwMuifQi8ofpFLv0gFz17k0
P3bIyXBc4JV3I0+A+b5+sv+BOtaUk9pWSoLIn5SAEK0ydfqpWhkKou2eoMmGt/UW
Zv6WSCfgN7K2XiXIuvUBjyr4F57m+GMb5/UIPDv01TPrOb+Usz6kmZwgtRqpOTE4
ozDNUwNtx074h7ZHNx/taP7i2bt9pD+KnY6KgJ/6S9QtCE7+SCuDGIV35YFJx/8R
b+hrmm40ES7GP/qYXZ+OF+iBAm7svs6nSKbkSmKxZZDHc9i4GkOOt8yI3TvF2GPf
uTFjjLNuZEHat5ksZfFCbdEAlYR0sQ==
=x+J9
-----END PGP SIGNATURE-----
ASoC: Merge v6.5-rc2
Get a similar baseline to my other branches, and fixes for people using
the branch.
ACP driver should send SHA DMA completion command to PSP module for RN
platform only.
Add a revision check for RN platform.
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Link: https://lore.kernel.org/r/20230630070544.2167421-1-Mastan.Katragadda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set primary core mask and refcount.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Over time the function has changed and now there is no need to have the
duplicated sof_fw_trace_suspend() and sof_suspend_clients() in the
if (target_state == SOF_DSP_PM_D0) branch.
Remove it and add a simple check with a single goto statement.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <olarupaulstelian97@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the SOF_DBG_DUMP_IPC_MESSAGE_PAYLOAD flag to print the message payload
instead of the DEBUG_VERBOSE, which would need code modification and kernel
re-compilation.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dump the IPC message payload if BIT(11) of sof_debug is set and the message
contains more data than just a header.
The header size differs between TX and RX and in case of set_get_data, the
header is always the reply header for the message regardless if it is TX
or RX.
The use of printk(KERN_DEBUG "..."); is on purpose to keep the dmesg output
tidy.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We only print out the header information of an IPC message in debug level,
either in verbose or non verbose way (Kconfig option).
On top of the header information the message itself can help reproducing
and identifying issues.
BIT(11) can be used to request a message payload dump if it is supported
by the IPC implementation.
Since IPC message payload printing is only implemented for IPC4, the flag
will not have any effect to IPC3 for now.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The shutdown is called on reboot/shutdown of the machine.
At this point the firmware tracing cannot be used anymore but in case of
IPC3 it is using and keeping a DMA channel active (dtrace).
For Tiger Lake platforms we have a quirk in place to fix rare reboot issues
when a DMA was active before rebooting the system.
If the tracing is enabled this quirk will be always used and a print
appears on the kernel log which might be misleading or not even correct.
Release the fw tracing before executing the shutdown to make sure that this
known DMA user is cleared away.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Virtual widgets are added for the purpose of showing connections between
aggregated DAIs in SDW topologies. However, we shouldn't touch them in
SOF.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Testing virtual widget is required in many functions. No function
changed in this commit.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for IPC tx_message with a reply_size set to zero,
return zero when message reply_size is zero at acp_dsp_ipc_get_reply().
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230614103707.2246296-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the function so reading the data is done outside the work
function so fuzzing can pass data directly into the work callbacks.
Also expose the inner function outside the module so we can call it from
the injector.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230608221822.2825786-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'hda_disable_rewinds' kernel parameter is initialized with a
non-existent CONFIG_SND_SOC_SOF_HDA_DISABLE_REWINDS.
We probably forgot to clean this up when this Kconfig option was
removed when upstreaming in 2021.
Reported-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The functionality described in Commit 61bef9e68d ("ASoC: SOF: Intel: hda: enforce exclusion between HDaudio and SoundWire")
does not seem to be properly implemented with two issues that need to
be corrected.
a) The test used is incorrect when DisplayAudio codecs are not supported.
b) Conversely when only Display Audio codecs can be found, we do want
to start the SoundWire links, if any. That will help add the relevant
topologies and machine descriptors, and identify cases where the
SoundWire information in ACPI needs to be modified with a quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The register changed with the HDaudio integration, the information is
present in the extended link descriptor and not in the SHIM.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some functions can be used for newer LNL hardware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a DMA config TLV structure and the relevant code to
copy this TLV after the gateway configuration. For now this is an
iso-functionality change, the TLVs are not configured just
yet. Additional patches will be needed for DMIC/SSP/ALH (aka
SoundWire).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting with LunarLake, the DMIC/SSP/SoundWire audio interfaces will
use the HDaudio DMA. This patch adds the DMA configuration structure
to be passed as a TLV appended at the end of each gateway
configuration.
This patch only provides the definitions for now, the TLV will be
added in the actual blobs separately for each interface.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LunarLake introduces a new TLV blob passed to the firmware for DMA
configuration. This TLV structure is directly inspired by the ALH
multi-gateway structure used so far. This patch suggest a transition
to the more abstract structure with no references to ALH.
This is an iso-functionality redefinition of structure, the TLV will
be added in a follow-up patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted
away.
This patch hides the mechanism to determine the multi-link structure
related to the DAI and program the LOSIDV register. An added benefit
is that we can remove all references to the codec DAI from what should
be a CPU dai configuration only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted away.
This patch hides the stream format setup which is currently completely
related to the HDaudio codec setup - not something that will work for
other types of DAIs.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted
away. Start here with hiding the stream_tag needed by the HDAudio
codec_dai.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports several NULL
pointer dereference paths.
Example log:
ops = hda_dai_get_ops(substream, cpu_dai);
| | ^~~~~
| | |
| | (14) return of NULL to ‘non_hda_dai_hw_params’ from ‘hda_dai_get_ops’
| 353 | sdev = widget_to_sdev(w);
| 354 | hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream);
| | ~~~~~~~~~~~~~~~~~~~~
| | |
| | (15) dereference of NULL ‘ops’
The function hda_dai_get_ops() can return NULL, but the return value
is not checked across the board. It's not a problem today, since we do
check in the first use of the function, but static analysis tools are
not aware of the different ALSA stages. Rather than argue forever,
let's just add the error checks consistently and make sure this tool
can be added to the CI checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 and mt8186 .dbg_dump callback to print some information when
DSP panic occurs.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601034939.15802-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series handles a few issues related to the ES8316 audio
codec, discovered while doing some testing on the Rock 5B board.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The topology file and the machine driver rely on common definitions
for the dailink stream_name. To avoid any backwards-compatibility
problems, the machine driver stream names are set in stone and cannot
be modified.
This is problematic when we try to name some of the topology widgets
after the stream_name, since the widget name is limited to 44
characters
tools/include/uapi/sound/asound.h:#define SNDRV_CTL_ELEM_ID_NAME_MAXLEN 44
Existing examples include "Analog Playback and Capture" for HDaudio
dailinks, which leaves less than 20 chars to identify widgets/controls
with a meaningful name.
Since the 44-char limit is part of the UAPI definitions, we assumed
there is no way to increase it.
This patchset suggests instead a partial match which allows topology
files to use a shorter stream_name, which in turn allows for
self-explanatory widget names that comply with the 44-char limit.
This should not break any existing setup but with the introduction of
a partial match new dailinks should be named carefully to avoid
confusions between e.g. 'link1' and 'link10'. The last patch fixes
such an issue in the 'nocodec' test topology used by Intel.
With a common kernel config for nocodec and codec modes, the number of DAI
drivers will be set to 15 for nocodec as well. So adjust this when set
the machine params for the nocodec mode if the debug flag is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows setting shorter names for the widget stream names in
topology. For example, in the case of HDA Analog DAI link, the stream
name is "Analog Playback and Capture". But it is enough to match "Analog"
in the DAI link stream name with a widget's stream name. This is needed
to set more meaningful names for the DAI widgets using the stream name
in topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 dai driver and specify of_machine to support mt8188 audio.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523025933.30494-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An earlier simplification to only pass the direction is no longer
suitable, all the ACE2.x HDaudio DMA management relies on access to
the substream structure.
This patch is an iso-functionality change, the HDaudio DMA parts will
be provided separately.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-23-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use new helper and interface to make sure the HDaudio and SoundWire
parts use the same mutex when accessing shared registers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The hdac_bus pointer is used to access the extended link information
and handle power management. Pass it from the SOF driver down to the
auxiliary devices.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous settings are not applicable, use a flag to determine what
the register layout is.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the new enum needed for SoundWire IP selection. The LunarLake PCI
descriptors and DSP parts will be added at a later time.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:
This patch series provides better handling of cases where sending
a data blob to FW results in a validation error.
In this case we restore to the last good known value instead of keeping
the data that firwmare rejected.
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
Series removes the pm_runtime.h inclusion in files where
APIs exported though pm_runtime.h are not used. In case
of files that make use of pm.h which comes form pm_runtime.h
added patch 2/2.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series will enable multicore support on MTL platforms similarly
to other Intel platforms.
The TGL patch is included to simplify the core_put implementation.
Multicore support can be enabled by updated topologies, with current set of
tplg files this series is not introducing any runtime change.
The function is improved in the way that if the firmware returns a
validation error on the newly sent bytes, then the kernel will
automatically restore to the old bytes value for a given kcontrol.
This way, if the firmware rejects a data blob then the kernel will also
reject it, instead of saving it for the next suspend/resume cycle. The
old behaviour is that the kernel would save it anyway and on next
firmware boot it would apply the previously-rejected configuration,
leading to errors during playback.
Additionally, the function also saves previously validated
configurations, so that if the firmware does end up rejecting a new
bytes value the kernel can send an old, previously-valid configuration.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230503081049.73847-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function is improved in the way that if the firmware returns a
validation error on the newly sent bytes, then the kernel will
automatically restore to the old bytes value for a given kcontrol.
This way, if the firmware rejects a data blob then the kernel will also
reject it, instead of saving it for the next suspend/resume cycle. The
old behaviour is that the kernel would save it anyway and on next
firmware boot it would apply the previously-rejected configuration,
leading to errors during playback.
Additionally, the function also saves previously validated
configurations, so that if the firmware does end up rejecting a new
bytes value the kernel can send an old, previously-valid configuration.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230503081049.73847-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_ipc4_pre_trigger() has two issues:
1. In the default case, we are returning without unlocking the mutex.
2. In case SNDRV_PCM_TRIGGER_STOP: when ret is less than zero it goes
to out, unlocks but returns zero instead of a negative value.
Fix this by changing the final return value to 'ret' instead of zero,
and initialize 'ret' to zero in the start of the function.
Fixes: 225f37b578 ("ASoC: SOF: ipc4-pcm: reset all pipelines during FE DAI hw_free")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230519064404.1659637-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return value from the call to sof_ipc4_get_valid_bits() is int.
However, the return value is being assigned to an unsigned
int variable 'out_ref_valid_bits', so making it an int.
Eliminate the following warning:
./sound/soc/sof/ipc4-topology.c:1537:6-24: WARNING: Unsigned expression compared with zero: out_ref_valid_bits < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4985
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230516081116.71370-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware may do context saving before powering off primary core, so driver
needs to send ipc msg by set_core_state. In IPC4 path, firmware needs to
save current context to IMR before powering off primary core. Firmware
does nothing for set_core_state message in IPC3 path. So IPC4 and IPC3
can share the same operation sequence.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523103217.20412-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In core_get case, driver can power up primary core and don't need to send
ipc message to fw. Non-primary core should be powered up by fw with ipc
message.
In core_put case, driver should first send ipc message to fw to disable dsp
core then power down primary core if the target is primary core.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523103217.20412-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The manifest's firmware module configuration section contains the measured
CPC values along with a matching IBS/OBS values.
The CPC can be looked up by looking for a matching IBS/OBS entry.
In case of multiple matches we will use the highest CPC value.
If there is no mod_cfg or no CPC value (all 0) or no match was found then
print warning message and use 0 as CPC value.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stop parsing the CPC value from topology to module_base_cfg.
The CPC value is only set for few modules in topology which makes the CPC
handling inconsistent.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename sof_ipc4_update_pipeline_mem_usage() to
sof_ipc4_update_resource_usage() in order to be re-usable for generic
resource storage, calculation of a module, like CPC adjustment.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Save a pointer to the firmware module configuration area in
sof_ipc4_fw_module struct for later use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bss_size is only set, but not used by the code, remove it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Improve the logic to account for the current restrictions in topology while
making it extensible for future topology modifications.
The current topology definitions assume that input/output formats come in pairs.
For example even if there's only 1 output format for a module, we add 3 output
formats to match that of the input format count with the same parameters.
This is unnecessary but we have to deal with it until the topologies are
modified. Additionally, choosing the input/output audio format should
depend only on the pipeline params or the runtime FE hw_params depending
on where the module is in the pipeline.
This series modifies the logic for selection based on this and removes
unnecessary dependencies between the input and output formats.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Do not reset pipelines during the stop/suspend triggers in the BE DAI
ops as the BE DAI pipeline needs to be left in the PAUSED state. It should
only be reset during hw_free. This simplification is already done for
the FE pipelines and the DAI trigger only toggles the states between
PAUSED and RUNNING.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The HDAudio support has not changed much since CometLake/2019: the
code was reshuffled for IPC4 support and we used hdac_hda for external
and Display Audio codec, but the hda-dai code was only used for
HDAudio codecs.
In the LunarLake architecture, all endpoints (HDaudio, SSP, DMIC,
SoundWire) are handled with the HDaudio DMA, which requires us to
revisit the definitions of HDA_LINK, and remove the mutual exclusion
between NOCODEC and HDA_LINK: we do want the ability to test SSP/DMIC
in NOCODEC mode even with an HDA DMA.
This code change exposed a number of issues, with a useless .prepare
callback, a DAI number mismatch and the need to support SoundWire
which is handled by a different component in
drivers/soundwire/intel_ace2.c.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
With additional testing with multiple links and multiple DAI types, we
found a couple of mistakes with refcounts, base address, missing
initialization.
A new helper was also added due to a change in the SoundWire
programming sequences, with the host driver in charge of setting up
the DMA channel mapping instead of the firmware.
Do not reset pipelines during the stop/suspend triggers in the BE DAI
ops as the BE DAI pipeline needs to be left in the PAUSED state. It should
only be reset during hw_free. This simplification is already done for
the FE pipelines and the DAI trigger only toggles the states between
PAUSED and RUNNING.
But because the FE DAI hw_free is invoked first and all the pipelines are
freed during this op, we need to make sure that the BE DAI pipeline also
gets reset before it is freed. So do not skip the pipelines that have the
skip_during_fe_trigger flag set when resetting pipelines.
Also, because the pipeline state changes are split between the FE and BE
DAI ops now, protect the BE DAI pipeline state changes with the
pipeline_state_mutex as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515112022.30297-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Introduce a separate op implementation for get_hext_stream() for IPC4.
This op will also be used to set the skip_during_fe_trigger flag for the
BE DAI pipeline. With this change, we can remove the flag setting in
sof_ipc4_dai_config() which will further simplify support for
DMIC/SSP/Soundwire in the LunarLake platform.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515112022.30297-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Instead of open coding the sending of sink format of the copier with
LARGE_CONFIG_SET message, use the proper function to do so.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512105642.23437-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The nocodec mode served two purposes so far
a) generate a test driver for DMIC/SSP without any codec connected
b) make sure the use of snd_hdac_ libraries was contained
b) is no longer an option for LunarLake, the HDaudio DMA is used for
DMIC/SSP and the HDA_LINK option needs to be enabled.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
For LunarLake support, we will have to use HDAudio DMA-based DAIs even
for SSP/DMIC/SoundWire. That's completely different to the
HDA_AUDIO_CODEC, the DAI ops deal with DMA configuration and that can
happen in the absence of any HDAudio codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
hda_dai_hw_params, hda_dai_trigger(), hda_dai_hw_free are currently
only used for HDaudio codec support, but will be reused for
SSP/DMIC/SoundWire in the LunarLake/ACE2.x case. To avoid 'defined but
not used' errors or added complexity in Kconfig, mark all these
functions as __maybe_used.
When SSP/DMIC/SoundWire are added, some of these changes may be
reverted. For now this avoids compilation warnings.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Before we change the Kconfig support, move code around. No
functionality change with this commit in isolation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The probe workqueue is only needed if we have a Display Audio codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
For LunarLake support, we need to enable HDA_LINK but we also want the
ability to remove HDaudio codec support, e.g. for 'nocodec'
tests. This requires a small change in the bus initialization without
any codec-specific callbacks provided.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The number of DAIs was based on a Kconfig option and the declaration
on another. Fix before changing the dependencies.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The existing code relies on conversions from cpu_dai to the sdev
structure pointer based on the cpu_dai component. This works fine for
HDaudio but will not work for SoundWire DAIs which are registered by a
different component. That's a problem preventing reuse of the HDaudio
DMA stream allocation for SoundWire DAIs starting with the LunarLake
platform.
This patch introduces a set of helpers to perform the conversion, and
an indirect way of retrieving the sdev pointer based on the
swidget->comp intermediate pointer.
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The code has been cleaned-up multiple times, but while adding the new
abstractions for DMIC/SSP/SoundWire it appears that we don't really
need a specific sequence for .prepare, and we can reuse what
.hw_params already does.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The current selection logic assumes that input and output formats always
come in pairs in topology. Handle this special case by checking if all
input formats are the same. And for the case where there are multiple
supported input audio formats, modify the selection logic to pick the
audio formats based on the reference params which is either the FE
hw_params or the pipeline params based on the type of module.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a helper function to check if all formats are identical.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Modify the output format selection when there are multiple output
formats available to choose the one that matches the reference params.
The reference params depend on the type of module. In the case of
processing modules, the reference params are based on the selected input
audio format. This would be the case when a processing module does not
perform any format conversion during processing.
The only special case is the copier module. The copier module is capable
of format conversion but it is only used in the case when the output
is fixed to a single format. In the case of a module copier, when there are
multiple formats, the reference params is based on the selected input
params and the output format must match that of the selected input
format. In the case of host copier, the reference params should be
based on the input audio format for playback and the FE hw_params for
capture. In the case DAI copier, the reference params should be based on
the input audio format for capture and the FE hw_params for playback
when there is no format conversion in the pipeline from the host to the
DAI.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a new helper function sof_ipc4_get_valid_bits() to get the valid
bits in the PCM params.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The current topologies have input/output formats in pairs and even
though there are multiple output formats, they are all the same. Handle
this case as if there were only one format in topology. Also, add a check
for the number of output formats and reports errors where applicable.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Rename it to sof_ipc4_init_input_audio_fmt() as it only does input
format selection now.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
In preparation for changing the logic for input/output format selection,
move the call to sof_ipc4_init_output_audio_fmt() into the individual
widget prepare ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a helper function to select the output format.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
When there is only one input/output format specified in topology, there
is no need to search for a matching format, simply pick the available
one. This is in preparation to modify and split the selection logic for
the input and output audio formats.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The memory allocated for the tuples array assumes that there's 1
instance of all tokens already. So for those tokens that have multiple
instances in topology, we need to exclude the initial instance that has
already been accounted for.
Fixes: 4fdef47a44 ("ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515085200.17094-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Using the same token ID for both input and output format pin index
results in collisions and incorrect pin index getting parsed from
topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515104403.32207-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Topology could have more instances of the tokens being searched for than
the number of sets that need to be copied. Stop copying token after the
limit of number of token instances has been reached. This worked before
only by chance as we had allocated more size for the tuples array than
the number of actual tokens being parsed.
Fixes: 7006d20e5e ("ASoC: SOF: Introduce IPC3 ops")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512114630.24439-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
If there are failures in DSP runtime resume, the device state will not
reach active and this makes it impossible e.g. to retrieve a possible
DSP panic dump via "exception" debugfs node. If
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in
cache is stale. If debugfs cache is not used, the region simply cannot
be read.
To allow debugging these scenarios, update the debugfs cache contents in
resume error handler. User-space can then later retrieve DSP panic and
other state via debugfs (requires SOF debugfs cache to be enabled in
build).
Reported-by: Curtis Malainey <cujomalainey@chromium.org
Link: https://github.com/thesofproject/linux/issues/4274
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512104638.21376-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The commands in sof_ipc_dai_config.flags are encoded as bits:
1 (bit0) - hw_params
2 (bit1) - hw_free
4 (bit2) - pause
These are commands, they cannot be combined as one would assume, for
example
3 (bit0 | bit1) is invalid.
This can happen right at the second start of a stream as at the end of the
first stream we set the hw_free command (bit1) and on the second start we
would OR on top of it the hw_params (bit0).
Fixes: b66bfc3a98 ("ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230512110317.5180-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
When an error occurs, we need to make sure the device can pm_runtime
suspend instead of keeping it active.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512103315.8921-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
When an error occurs, we need to make sure the device can pm_runtime
suspend instead of keeping it active.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512103315.8921-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
When a firmware IPC error happens during a pm_runtime suspend, we
ignore the error and suspend anyways. However, the code
unconditionally increases the runtime_pm counter. This results in a
confusing configuration where the code will suspend, resume but never
suspend again due to the use of pm_runtime_get_noresume().
The intent of the counter increase was to prevent entry in D3, but if
that transition to D3 is already started it cannot be stopped. In
addition, there's no point in that case in trying to prevent anything,
the firmware error is handled and the next resume will re-initialize
the firmware completely.
This patch changes the logic to prevent suspend when the device is
pm_runtime active and has a use_count > 0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512103315.8921-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
These registers enable the HDaudio DMA hardware to split/merge data
from different PDIs, possibly on different links.
This capability exists for all types of HDaudio extended links, but
for now is only required for SoundWire. In the SSP/DMIC case, the IP
is programmed by the DSP firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
We defined the values but never initialized it for SoundWire/SSP, fix
this miss.
A Fixes: tag is not provided as instance_offset was not used so far,
so nothing was really broken. This patch is only required for the
SoundWire support in the following patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
We mix the use of hlink->ml_addr and the 'ml_addr' parameter. It's the
same thing, let's align on using the parameter.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The base_ptr value needs to be derived from the remap_addr pointer,
not the ml_addr. This base_ptr was used only in debug logs that were
so far not contributed upstream so the issue was not detected. It
needs to be fixed for SoundWire support on LunarLake.
Fixes: 17c9b6ec35 ("ASoC: SOF: Intel: hda-mlink: add structures to parse ALT links")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Same functionality as for DMIC/SSP with different ID.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
In hindsight it was a very bad idea to use the same refcount for
Extended and 'legacy' HDaudio multi-links. The existing solution only
powers-up the first sublink, which causes SoundWire and SSP tests to
fail when more than one DAI is used concurrently. Solving this problem
requires per-sublink refcounting, as suggested in this patch.
The existing refcounting remains for 'legacy' HdAudio links, mainly to
avoid changing the obscure programming sequence in
snd_hdac_ext_bus_link_put().
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Many ASoC drivers are using dummy DAI.
I have 2 concern about it. 1st one is there is no guarantee that local
strings ("snd-soc-dummy-dai", "snd-soc-dummy") are kept until the card
was binded if it was added at subfunction.
2nd one is we can use common snd_soc_dai_link_component for it.
This patch-set adds common asoc_dummy_dlc, and use it.
Function mt8186_get_reply() performs practically the same operation
as the common snd_sof_ipc_get_reply() helper: removing the custom
function allows us to simply perform a call to the sof-priv helper
snd_sof_ipc_process_reply(), simplifying and shortening this driver
and getting all the benefits of using a common API.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20230503113413.149235-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org
Function mt8195_get_reply() performs practically the same operation
as the common snd_sof_ipc_get_reply() helper: removing the custom
function allows us to simply perform a call to the sof-priv helper
snd_sof_ipc_process_reply(), simplifying and shortening this driver
and getting all the benefits of using a common API.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20230503113413.149235-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org
At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=7XGG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Last minute patch for correct the pasue/resume operation with IPC4. The
issues are hardto reproduce and needs extended stress testing to be hit,
in which case the audio breaks due to DMA errors.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Simplify IPC messages to avoid passing a reply structure that is not
used later.
Suspending to S0iX with IPC3 requires the PM_GATE IPC to be sent again
to stop the DMA trace. But with IPC4, this is not needed as the trace is
stopped with the LARGE_CONFIG_SET IPC. Also, sending the MOD_D0IX IPC to
set the D0I3 state again when the DSP is in D0I3 already results in an
imbalance in PM runtime states in the firmware. So split the
set_power_state ops for IPC3 and IPC4 to avoid sending the MOD_D0IX IPC
when the DSP is already in D0I3 with IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420104714.29573-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of IPC4, a pipeline is only paused during STOP/PAUSE/SUSPEND
triggers and the FW keeps the host DMA running when a pipeline is
paused. The start/stop tests iterate through STOP/START triggers without
involving a hw_free. This means that the pipeline state will only toggle
between PAUSED (during the STOP trigger) and RUNNING (during the START
trigger). So this test should be treated in the same way as a
PAUSE_PUSH/PAUSE_RELEASE test and the DMA should be kept running when
toggling the pipeline states between PAUSED and RUNNING.
Since there is no way to tell if a STOP trigger will be followed by hw_free
or not, this patch proposes to always skip DMA stop during the STOP trigger
and handle it later during hw_free. Introduce a new flag in struct
sof_ipc_pcm_ops, delayed_platform_trigger, that will be used to ensure that
the host DMA will not be stopped during the STOP/PAUSE/RELEASE triggers
and set it for IPC4. The platform_trigger call to stop the DMA will be
invoked during PCM hw_free instead when the pipeline is reset.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FW does not pause/stop the host DMA during pause and stopping the
host DMA from the driver could result in an unknown behaviour. So, skip
triggering the HD-Audio host DMA during pause/release.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert all existing calls that pass "NULL, 0" for reply data to the new
no_reply calls. Also convert any calls that pass in data but don't
actually parse the result.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230419194057.42205-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
