Clang warns (or errors with CONFIG_WERROR):
sound/soc/sof/intel/hda.c:423:6: error: variable 'chip' is uninitialized when used here [-Werror,-Wuninitialized]
423 | if (chip && chip->check_sdw_wakeen_irq)
| ^~~~
sound/soc/sof/intel/hda.c:418:39: note: initialize the variable 'chip' to silence this warning
418 | const struct sof_intel_dsp_desc *chip;
| ^
| = NULL
1 error generated.
Add the missing initialization, following the pattern of the other irq
functions.
Fixes: 9362ab78f1 ("ASoC: SOF: Intel: add abstraction for SoundWire wake-ups")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230809-intel-hda-missing-chip-init-v1-1-61557ca6fa8a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_ipc4_update_resource_usage() call updates the CPC value in basecfg
and it must be done prior to making a copy of the copier configuration
for the init message.
Other module types do the resource update as last step or in case of a
process module at the correct time, before the memcpy.
Fixes: d8a2c98793 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230809125656.27585-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With IPC3, we reset hw_params during the stop trigger, so we should also
clean up the link DMA during the stop trigger.
Fixes: 1bf83fa665 ("ASoC: SOF: Intel: hda-dai: Do not perform DMA cleanup during stop")
Closes: https://github.com/thesofproject/linux/issues/4455
Closes: https://github.com/thesofproject/linux/issues/4482
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217673
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230808110627.32375-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset first fixes a number of errors made in the hda-mlink
support, then adds Lunar Lake definitions. The main contribution is
the hda-dai changes where the HDaudio DMA is now used for SSP, DMIC
and SoundWire. In previous hardware the GPDMA (aka DesignWare) was
used and controlled by the audio firmware. The volume of code is
minimized with the abstraction added in previous kernel cycles.
Due to cross-dependencies between ASoC and SoundWire trees, the full
support for jack detection will be deferred to the next kernel
cycle. There's not much point to ask for a sync of the two trees to
support one patch for each tree - we are at -rc5 already.
When using more than one sublink for amplifier aggregation, we need to
add the sublink info to debug the programming sequences.
No functional change, only additional precisions in the log.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A pipeline is identified by two indices: 'instance_id' and 'pipeline_id'
This is clearly seen in kernel logs when creating a pipeline
"Create widget pipeline.20 instance 0 - pipe 20 - core 0"
but other logs are less clear
"ipc4 set pipeline 1 state 4"
Change definitions and logs to make sure the logs clearly identify
which of the two indices are used in state transitions.
No functional change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The solution used before LunarLake relies on a 'Multi-gateway'
firmware configuration. This is no longer needed with the DMA hardware
handling multiple links directly. To avoid adding a platform-specific
quirk in the generic IPC4 code, this patch resets the device count
when fetching the stream context.
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to retrieve the current value to deal with the HDAudio
WAKEEN/WAKESTS setup.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code cannot work for LunarLake, let's add a layer of
abstraction.
No functional change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These callbacks are just wrappers to keep the code relatively clean.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During the hw_params and hw_free stages, we need to map the stream tag
and channels in the PCMSyCM registers.
The trigger callback is just a wrapper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Same abstraction as SSP/DMIC, with only the get_hlink helper changing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we have multiple CPU DAIs in a dailink, typically for SoundWire
aggregated solutions with amplifiers on multiple links, we only want
to allocate one HDaudio stream_tag. The simplest solution is to
allocate the hext_stream/stream_tag for the DAI with index 0 in the
dailink, and reuse the same stream for all other CPU DAIs.
This assumption relies on serialization of DAIs by the ASoC core,
where all CPU DAIs are handled in a loop.
The stream release follows the same idea of releasing the tag for the
first DAI only. Ideally we would want the loop to be handled in
reverse-order to summetry, but there is no risk of reusing a
stream_tag which is no longer valid.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can reuse the same helpers as for SSP, with just the link type
being different.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new ops for SSP.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DMA widget ops are almost similar to the HDaudio ones, with the
exception of codec_dai_set_hext_stream() which is not relevant and the
format calculation which isn't dependent on the codec dai.
The DMA ops can be selected only starting with ACE_2_0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the LunarLake hardware, the default IP ownership changed to the
host driver, instead of the firmware in previous generation.
In the absence of any capability negotiation, we need to assume a
fixed partitioning between host driver and firmware. The OFLEN bit
needs to be set as early as possible for resources handled by the
firmware, since we can't control when the firmware might try to access
the resources.
For now DMIC and SSP are handled by the DSP firmware. SoundWire is a
separate case, the OFLEN bit can be set when starting-up and resuming
the aux device for each link.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It was just a matter of time before we found a case where we needed
separate ops for MTL and LNL. For LNL we need to set the DMIC/SSP
OFLEN bit in the probe and resume steps, and this can only be done
cleanly with separate ops.
The function prototypes in mtl.h were added in the same order as their
implementation in mtl.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add initial support for Lunarlake. For now only HDAudio interfaces are
supported, DMIC/SSP/SoundWire require additional work so that the DAIs
reuse the HDaudio DMA stream allocation.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All interfaces are accessible without the DSP and rely on the HDaudio
DMA only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial code had a logic flaw where the gateway config length kept
increasing after each playback/capture trigger, with the DMA config
TLV being added at every call of sof_ipc4_prepare_copier_module()
This didn't cause any issues with regular playback/capture, but this
was flagged as an error by firmware in the case of multiple amplifiers
on different links.
Fixes: a0659f81c3 ("ASoC: SOF: ipc4-topology: add DMA config TLV to IPC data")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a pipeline contains multiple DAI widgets, the pipe_widget is not
set up except for the first DAI. This result in the pipe_widget having
a default instance 0, which can conflict with another real the
pipeline instance 0 and leads to spurious transitions.
This patch makes sure the instance_id is properly initialized to a
-EINVAL value.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Likely a combination of copy-paste and test coverage problem. Oops.
Fixes: 87a6ddc0cf ("ASoC: SOF: Intel: hda-mlink: program SoundWire LSDIID registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HCHAN parameter should be the highest channel number, not the
channel count.
While we're at it, handle LCHAN with the dual __ffs helper.
Fixes: ccc2f0c1b6 ("ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here hdr is a pointer, and we should measure the size of
struct sof_ipc_cmd_hdr.
Fixes: 12c41c779f ("ASoC: SOF: Refactor rx function for fuzzing")
Signed-off-by: Xia Fukun <xiafukun@huawei.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230807075118.128122-1-xiafukun@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To prevent incorrect access between the host and DSP sides, we need to
modify DRAM as a non-cache memory type. Additionally, we can retrieve
the size of shared DMA from the device tree.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Kuan-Hsun Cheng <Allen-KH.Cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230803075028.32170-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
GCC11 provides an '-fanalyzer' static analysis option which does not
provide too many false-positives. This patch cleans-up known
problematic code paths to help enable this capability in CI. We've
used this for about a month already.
For MediaTek AFE, DAI DMA can support different bitwidths compared to
the BE DAI. Therefore, it is preferable to obtain the BE frame format
from the DAI_CONFIG.
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move existing function in common library to make sure the code can be
reused by other SoC vendors.
No functionality change outside of the move and added prefix.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Start removing Intel-specific arguments to make that function usable
by other SOC vendors.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731213242.434594-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports a possible NULL
pointer dereference.
sound/soc/sof/topology.c:1136:21: error: dereference of NULL ‘w’
[CWE-476] [-Werror=analyzer-null-dereference]
1136 | strcmp(w->sname, rtd->dai_link->stream_name))
The code is rather confusing and can be simplified to make static
analysis happy. No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/ reports an issue with memcpy:
sound/soc/sof/ipc3.c: In function ‘ipc3_wait_tx_done’:
sound/soc/sof/ipc3.c:309:33: error: use of NULL ‘reply_data’ where
non-null expected [CWE-476] [-Werror=analyzer-null-argument]
309 | memcpy(reply_data, msg->reply_data,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
310 | msg->reply_size);
The finding is legit with this call:
return sof_ipc3_tx_msg(sdev, &pm_ctx, sizeof(pm_ctx), NULL, 0, false);
Static analysis has no way of knowing that the reply will be zero-sized.
Add a check to only do the memcpy if the reply size is not zero and
the destination pointer is not NULL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/ reports several NULL pointer
dereference paths.
sof_ipc4_probe_get_module_info() can return a NULL value, but it's
only tested in the init state. Static analyzers cannot know the probe
state machine and hence flags a potential issue for all calls of that
function.
Squelch these errors by adding the same check consistently.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-15-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current code references 0x1a98 which is BXT-M (not -T as it is
commented) and it's an RVP, BXT-M B0 to be specific. From what we know
no BXT is available on market.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This doesn't check how many bytes the simple_write_to_buffer() writes to
the buffer. The only thing that we know is that the first byte is
initialized and the last byte of the buffer is set to NUL. However
the middle bytes could be uninitialized.
There is no need to use simple_write_to_buffer(). This code does not
support partial writes but instead passes "pos = 0" as the starting
offset regardless of what the user passed as "*ppos". Just use the
copy_from_user() function and initialize the whole buffer.
Fixes: 671e0b9005 ("ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/74148292-ce4d-4e01-a1a7-921e6767da14@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmS0at0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG6m8H/RZCd2DWeM94CgK5
DIxNLxu90PrEcrOnqeHFJtQoSiUQTHeseh9E4BH0JdPDxtlU89VwYRAevseWiVkp
JyyJPB40UR4i2DO0P1+oWBBsGEG+bo8lZ1M+uxU5k6lgC0fAi96/O48mwwmI0Mtm
P6BkWd3IkSXc7l4AGIrKa5P+pYEnm0Z6YAZILfdMVBcLXZWv1OAwEEkZNdUuhE3d
5DxlQ8MLzlQIbe+LasiwdL9r606acFaJG9Hewl9x5DBlsObZ3d2rX4vEt1NEVh89
shV29xm2AjCpLh4kstJFdTDCkDw/4H7TcFB/NMxXyzEXp3Bx8YXq+mjVd2mpq1FI
hHtCsOA=
=KiaU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS0zgsACgkQJNaLcl1U
h9C8Zwf9HZwtLMlojz17PYAkErGIwAGzwH8jsBmWnOwMuifQi8ofpFLv0gFz17k0
P3bIyXBc4JV3I0+A+b5+sv+BOtaUk9pWSoLIn5SAEK0ydfqpWhkKou2eoMmGt/UW
Zv6WSCfgN7K2XiXIuvUBjyr4F57m+GMb5/UIPDv01TPrOb+Usz6kmZwgtRqpOTE4
ozDNUwNtx074h7ZHNx/taP7i2bt9pD+KnY6KgJ/6S9QtCE7+SCuDGIV35YFJx/8R
b+hrmm40ES7GP/qYXZ+OF+iBAm7svs6nSKbkSmKxZZDHc9i4GkOOt8yI3TvF2GPf
uTFjjLNuZEHat5ksZfFCbdEAlYR0sQ==
=x+J9
-----END PGP SIGNATURE-----
ASoC: Merge v6.5-rc2
Get a similar baseline to my other branches, and fixes for people using
the branch.
ACP driver should send SHA DMA completion command to PSP module for RN
platform only.
Add a revision check for RN platform.
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Link: https://lore.kernel.org/r/20230630070544.2167421-1-Mastan.Katragadda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set primary core mask and refcount.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Over time the function has changed and now there is no need to have the
duplicated sof_fw_trace_suspend() and sof_suspend_clients() in the
if (target_state == SOF_DSP_PM_D0) branch.
Remove it and add a simple check with a single goto statement.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <olarupaulstelian97@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the SOF_DBG_DUMP_IPC_MESSAGE_PAYLOAD flag to print the message payload
instead of the DEBUG_VERBOSE, which would need code modification and kernel
re-compilation.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dump the IPC message payload if BIT(11) of sof_debug is set and the message
contains more data than just a header.
The header size differs between TX and RX and in case of set_get_data, the
header is always the reply header for the message regardless if it is TX
or RX.
The use of printk(KERN_DEBUG "..."); is on purpose to keep the dmesg output
tidy.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We only print out the header information of an IPC message in debug level,
either in verbose or non verbose way (Kconfig option).
On top of the header information the message itself can help reproducing
and identifying issues.
BIT(11) can be used to request a message payload dump if it is supported
by the IPC implementation.
Since IPC message payload printing is only implemented for IPC4, the flag
will not have any effect to IPC3 for now.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The shutdown is called on reboot/shutdown of the machine.
At this point the firmware tracing cannot be used anymore but in case of
IPC3 it is using and keeping a DMA channel active (dtrace).
For Tiger Lake platforms we have a quirk in place to fix rare reboot issues
when a DMA was active before rebooting the system.
If the tracing is enabled this quirk will be always used and a print
appears on the kernel log which might be misleading or not even correct.
Release the fw tracing before executing the shutdown to make sure that this
known DMA user is cleared away.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Virtual widgets are added for the purpose of showing connections between
aggregated DAIs in SDW topologies. However, we shouldn't touch them in
SOF.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Testing virtual widget is required in many functions. No function
changed in this commit.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for IPC tx_message with a reply_size set to zero,
return zero when message reply_size is zero at acp_dsp_ipc_get_reply().
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230614103707.2246296-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the function so reading the data is done outside the work
function so fuzzing can pass data directly into the work callbacks.
Also expose the inner function outside the module so we can call it from
the injector.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230608221822.2825786-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'hda_disable_rewinds' kernel parameter is initialized with a
non-existent CONFIG_SND_SOC_SOF_HDA_DISABLE_REWINDS.
We probably forgot to clean this up when this Kconfig option was
removed when upstreaming in 2021.
Reported-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The functionality described in Commit 61bef9e68d ("ASoC: SOF: Intel: hda: enforce exclusion between HDaudio and SoundWire")
does not seem to be properly implemented with two issues that need to
be corrected.
a) The test used is incorrect when DisplayAudio codecs are not supported.
b) Conversely when only Display Audio codecs can be found, we do want
to start the SoundWire links, if any. That will help add the relevant
topologies and machine descriptors, and identify cases where the
SoundWire information in ACPI needs to be modified with a quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The register changed with the HDaudio integration, the information is
present in the extended link descriptor and not in the SHIM.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some functions can be used for newer LNL hardware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a DMA config TLV structure and the relevant code to
copy this TLV after the gateway configuration. For now this is an
iso-functionality change, the TLVs are not configured just
yet. Additional patches will be needed for DMIC/SSP/ALH (aka
SoundWire).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting with LunarLake, the DMIC/SSP/SoundWire audio interfaces will
use the HDaudio DMA. This patch adds the DMA configuration structure
to be passed as a TLV appended at the end of each gateway
configuration.
This patch only provides the definitions for now, the TLV will be
added in the actual blobs separately for each interface.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LunarLake introduces a new TLV blob passed to the firmware for DMA
configuration. This TLV structure is directly inspired by the ALH
multi-gateway structure used so far. This patch suggest a transition
to the more abstract structure with no references to ALH.
This is an iso-functionality redefinition of structure, the TLV will
be added in a follow-up patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted
away.
This patch hides the mechanism to determine the multi-link structure
related to the DAI and program the LOSIDV register. An added benefit
is that we can remove all references to the codec DAI from what should
be a CPU dai configuration only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted away.
This patch hides the stream format setup which is currently completely
related to the HDaudio codec setup - not something that will work for
other types of DAIs.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted
away. Start here with hiding the stream_tag needed by the HDAudio
codec_dai.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports several NULL
pointer dereference paths.
Example log:
ops = hda_dai_get_ops(substream, cpu_dai);
| | ^~~~~
| | |
| | (14) return of NULL to ‘non_hda_dai_hw_params’ from ‘hda_dai_get_ops’
| 353 | sdev = widget_to_sdev(w);
| 354 | hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream);
| | ~~~~~~~~~~~~~~~~~~~~
| | |
| | (15) dereference of NULL ‘ops’
The function hda_dai_get_ops() can return NULL, but the return value
is not checked across the board. It's not a problem today, since we do
check in the first use of the function, but static analysis tools are
not aware of the different ALSA stages. Rather than argue forever,
let's just add the error checks consistently and make sure this tool
can be added to the CI checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 and mt8186 .dbg_dump callback to print some information when
DSP panic occurs.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601034939.15802-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series handles a few issues related to the ES8316 audio
codec, discovered while doing some testing on the Rock 5B board.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The topology file and the machine driver rely on common definitions
for the dailink stream_name. To avoid any backwards-compatibility
problems, the machine driver stream names are set in stone and cannot
be modified.
This is problematic when we try to name some of the topology widgets
after the stream_name, since the widget name is limited to 44
characters
tools/include/uapi/sound/asound.h:#define SNDRV_CTL_ELEM_ID_NAME_MAXLEN 44
Existing examples include "Analog Playback and Capture" for HDaudio
dailinks, which leaves less than 20 chars to identify widgets/controls
with a meaningful name.
Since the 44-char limit is part of the UAPI definitions, we assumed
there is no way to increase it.
This patchset suggests instead a partial match which allows topology
files to use a shorter stream_name, which in turn allows for
self-explanatory widget names that comply with the 44-char limit.
This should not break any existing setup but with the introduction of
a partial match new dailinks should be named carefully to avoid
confusions between e.g. 'link1' and 'link10'. The last patch fixes
such an issue in the 'nocodec' test topology used by Intel.
With a common kernel config for nocodec and codec modes, the number of DAI
drivers will be set to 15 for nocodec as well. So adjust this when set
the machine params for the nocodec mode if the debug flag is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows setting shorter names for the widget stream names in
topology. For example, in the case of HDA Analog DAI link, the stream
name is "Analog Playback and Capture". But it is enough to match "Analog"
in the DAI link stream name with a widget's stream name. This is needed
to set more meaningful names for the DAI widgets using the stream name
in topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 dai driver and specify of_machine to support mt8188 audio.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523025933.30494-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An earlier simplification to only pass the direction is no longer
suitable, all the ACE2.x HDaudio DMA management relies on access to
the substream structure.
This patch is an iso-functionality change, the HDaudio DMA parts will
be provided separately.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-23-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use new helper and interface to make sure the HDaudio and SoundWire
parts use the same mutex when accessing shared registers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The hdac_bus pointer is used to access the extended link information
and handle power management. Pass it from the SOF driver down to the
auxiliary devices.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous settings are not applicable, use a flag to determine what
the register layout is.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the new enum needed for SoundWire IP selection. The LunarLake PCI
descriptors and DSP parts will be added at a later time.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:
This patch series provides better handling of cases where sending
a data blob to FW results in a validation error.
In this case we restore to the last good known value instead of keeping
the data that firwmare rejected.
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
Series removes the pm_runtime.h inclusion in files where
APIs exported though pm_runtime.h are not used. In case
of files that make use of pm.h which comes form pm_runtime.h
added patch 2/2.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series will enable multicore support on MTL platforms similarly
to other Intel platforms.
The TGL patch is included to simplify the core_put implementation.
Multicore support can be enabled by updated topologies, with current set of
tplg files this series is not introducing any runtime change.
The function is improved in the way that if the firmware returns a
validation error on the newly sent bytes, then the kernel will
automatically restore to the old bytes value for a given kcontrol.
This way, if the firmware rejects a data blob then the kernel will also
reject it, instead of saving it for the next suspend/resume cycle. The
old behaviour is that the kernel would save it anyway and on next
firmware boot it would apply the previously-rejected configuration,
leading to errors during playback.
Additionally, the function also saves previously validated
configurations, so that if the firmware does end up rejecting a new
bytes value the kernel can send an old, previously-valid configuration.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230503081049.73847-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function is improved in the way that if the firmware returns a
validation error on the newly sent bytes, then the kernel will
automatically restore to the old bytes value for a given kcontrol.
This way, if the firmware rejects a data blob then the kernel will also
reject it, instead of saving it for the next suspend/resume cycle. The
old behaviour is that the kernel would save it anyway and on next
firmware boot it would apply the previously-rejected configuration,
leading to errors during playback.
Additionally, the function also saves previously validated
configurations, so that if the firmware does end up rejecting a new
bytes value the kernel can send an old, previously-valid configuration.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230503081049.73847-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_ipc4_pre_trigger() has two issues:
1. In the default case, we are returning without unlocking the mutex.
2. In case SNDRV_PCM_TRIGGER_STOP: when ret is less than zero it goes
to out, unlocks but returns zero instead of a negative value.
Fix this by changing the final return value to 'ret' instead of zero,
and initialize 'ret' to zero in the start of the function.
Fixes: 225f37b578 ("ASoC: SOF: ipc4-pcm: reset all pipelines during FE DAI hw_free")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230519064404.1659637-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return value from the call to sof_ipc4_get_valid_bits() is int.
However, the return value is being assigned to an unsigned
int variable 'out_ref_valid_bits', so making it an int.
Eliminate the following warning:
./sound/soc/sof/ipc4-topology.c:1537:6-24: WARNING: Unsigned expression compared with zero: out_ref_valid_bits < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4985
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230516081116.71370-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware may do context saving before powering off primary core, so driver
needs to send ipc msg by set_core_state. In IPC4 path, firmware needs to
save current context to IMR before powering off primary core. Firmware
does nothing for set_core_state message in IPC3 path. So IPC4 and IPC3
can share the same operation sequence.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523103217.20412-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In core_get case, driver can power up primary core and don't need to send
ipc message to fw. Non-primary core should be powered up by fw with ipc
message.
In core_put case, driver should first send ipc message to fw to disable dsp
core then power down primary core if the target is primary core.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523103217.20412-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The manifest's firmware module configuration section contains the measured
CPC values along with a matching IBS/OBS values.
The CPC can be looked up by looking for a matching IBS/OBS entry.
In case of multiple matches we will use the highest CPC value.
If there is no mod_cfg or no CPC value (all 0) or no match was found then
print warning message and use 0 as CPC value.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stop parsing the CPC value from topology to module_base_cfg.
The CPC value is only set for few modules in topology which makes the CPC
handling inconsistent.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename sof_ipc4_update_pipeline_mem_usage() to
sof_ipc4_update_resource_usage() in order to be re-usable for generic
resource storage, calculation of a module, like CPC adjustment.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Save a pointer to the firmware module configuration area in
sof_ipc4_fw_module struct for later use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bss_size is only set, but not used by the code, remove it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Improve the logic to account for the current restrictions in topology while
making it extensible for future topology modifications.
The current topology definitions assume that input/output formats come in pairs.
For example even if there's only 1 output format for a module, we add 3 output
formats to match that of the input format count with the same parameters.
This is unnecessary but we have to deal with it until the topologies are
modified. Additionally, choosing the input/output audio format should
depend only on the pipeline params or the runtime FE hw_params depending
on where the module is in the pipeline.
This series modifies the logic for selection based on this and removes
unnecessary dependencies between the input and output formats.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Do not reset pipelines during the stop/suspend triggers in the BE DAI
ops as the BE DAI pipeline needs to be left in the PAUSED state. It should
only be reset during hw_free. This simplification is already done for
the FE pipelines and the DAI trigger only toggles the states between
PAUSED and RUNNING.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The HDAudio support has not changed much since CometLake/2019: the
code was reshuffled for IPC4 support and we used hdac_hda for external
and Display Audio codec, but the hda-dai code was only used for
HDAudio codecs.
In the LunarLake architecture, all endpoints (HDaudio, SSP, DMIC,
SoundWire) are handled with the HDaudio DMA, which requires us to
revisit the definitions of HDA_LINK, and remove the mutual exclusion
between NOCODEC and HDA_LINK: we do want the ability to test SSP/DMIC
in NOCODEC mode even with an HDA DMA.
This code change exposed a number of issues, with a useless .prepare
callback, a DAI number mismatch and the need to support SoundWire
which is handled by a different component in
drivers/soundwire/intel_ace2.c.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
With additional testing with multiple links and multiple DAI types, we
found a couple of mistakes with refcounts, base address, missing
initialization.
A new helper was also added due to a change in the SoundWire
programming sequences, with the host driver in charge of setting up
the DMA channel mapping instead of the firmware.
Do not reset pipelines during the stop/suspend triggers in the BE DAI
ops as the BE DAI pipeline needs to be left in the PAUSED state. It should
only be reset during hw_free. This simplification is already done for
the FE pipelines and the DAI trigger only toggles the states between
PAUSED and RUNNING.
But because the FE DAI hw_free is invoked first and all the pipelines are
freed during this op, we need to make sure that the BE DAI pipeline also
gets reset before it is freed. So do not skip the pipelines that have the
skip_during_fe_trigger flag set when resetting pipelines.
Also, because the pipeline state changes are split between the FE and BE
DAI ops now, protect the BE DAI pipeline state changes with the
pipeline_state_mutex as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515112022.30297-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Introduce a separate op implementation for get_hext_stream() for IPC4.
This op will also be used to set the skip_during_fe_trigger flag for the
BE DAI pipeline. With this change, we can remove the flag setting in
sof_ipc4_dai_config() which will further simplify support for
DMIC/SSP/Soundwire in the LunarLake platform.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515112022.30297-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Instead of open coding the sending of sink format of the copier with
LARGE_CONFIG_SET message, use the proper function to do so.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512105642.23437-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The nocodec mode served two purposes so far
a) generate a test driver for DMIC/SSP without any codec connected
b) make sure the use of snd_hdac_ libraries was contained
b) is no longer an option for LunarLake, the HDaudio DMA is used for
DMIC/SSP and the HDA_LINK option needs to be enabled.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
For LunarLake support, we will have to use HDAudio DMA-based DAIs even
for SSP/DMIC/SoundWire. That's completely different to the
HDA_AUDIO_CODEC, the DAI ops deal with DMA configuration and that can
happen in the absence of any HDAudio codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
hda_dai_hw_params, hda_dai_trigger(), hda_dai_hw_free are currently
only used for HDaudio codec support, but will be reused for
SSP/DMIC/SoundWire in the LunarLake/ACE2.x case. To avoid 'defined but
not used' errors or added complexity in Kconfig, mark all these
functions as __maybe_used.
When SSP/DMIC/SoundWire are added, some of these changes may be
reverted. For now this avoids compilation warnings.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Before we change the Kconfig support, move code around. No
functionality change with this commit in isolation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The probe workqueue is only needed if we have a Display Audio codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
For LunarLake support, we need to enable HDA_LINK but we also want the
ability to remove HDaudio codec support, e.g. for 'nocodec'
tests. This requires a small change in the bus initialization without
any codec-specific callbacks provided.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The number of DAIs was based on a Kconfig option and the declaration
on another. Fix before changing the dependencies.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The existing code relies on conversions from cpu_dai to the sdev
structure pointer based on the cpu_dai component. This works fine for
HDaudio but will not work for SoundWire DAIs which are registered by a
different component. That's a problem preventing reuse of the HDaudio
DMA stream allocation for SoundWire DAIs starting with the LunarLake
platform.
This patch introduces a set of helpers to perform the conversion, and
an indirect way of retrieving the sdev pointer based on the
swidget->comp intermediate pointer.
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The code has been cleaned-up multiple times, but while adding the new
abstractions for DMIC/SSP/SoundWire it appears that we don't really
need a specific sequence for .prepare, and we can reuse what
.hw_params already does.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The current selection logic assumes that input and output formats always
come in pairs in topology. Handle this special case by checking if all
input formats are the same. And for the case where there are multiple
supported input audio formats, modify the selection logic to pick the
audio formats based on the reference params which is either the FE
hw_params or the pipeline params based on the type of module.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a helper function to check if all formats are identical.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Modify the output format selection when there are multiple output
formats available to choose the one that matches the reference params.
The reference params depend on the type of module. In the case of
processing modules, the reference params are based on the selected input
audio format. This would be the case when a processing module does not
perform any format conversion during processing.
The only special case is the copier module. The copier module is capable
of format conversion but it is only used in the case when the output
is fixed to a single format. In the case of a module copier, when there are
multiple formats, the reference params is based on the selected input
params and the output format must match that of the selected input
format. In the case of host copier, the reference params should be
based on the input audio format for playback and the FE hw_params for
capture. In the case DAI copier, the reference params should be based on
the input audio format for capture and the FE hw_params for playback
when there is no format conversion in the pipeline from the host to the
DAI.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a new helper function sof_ipc4_get_valid_bits() to get the valid
bits in the PCM params.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The current topologies have input/output formats in pairs and even
though there are multiple output formats, they are all the same. Handle
this case as if there were only one format in topology. Also, add a check
for the number of output formats and reports errors where applicable.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Rename it to sof_ipc4_init_input_audio_fmt() as it only does input
format selection now.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
In preparation for changing the logic for input/output format selection,
move the call to sof_ipc4_init_output_audio_fmt() into the individual
widget prepare ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a helper function to select the output format.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
When there is only one input/output format specified in topology, there
is no need to search for a matching format, simply pick the available
one. This is in preparation to modify and split the selection logic for
the input and output audio formats.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The memory allocated for the tuples array assumes that there's 1
instance of all tokens already. So for those tokens that have multiple
instances in topology, we need to exclude the initial instance that has
already been accounted for.
Fixes: 4fdef47a44 ("ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515085200.17094-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Using the same token ID for both input and output format pin index
results in collisions and incorrect pin index getting parsed from
topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515104403.32207-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Topology could have more instances of the tokens being searched for than
the number of sets that need to be copied. Stop copying token after the
limit of number of token instances has been reached. This worked before
only by chance as we had allocated more size for the tuples array than
the number of actual tokens being parsed.
Fixes: 7006d20e5e ("ASoC: SOF: Introduce IPC3 ops")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512114630.24439-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
If there are failures in DSP runtime resume, the device state will not
reach active and this makes it impossible e.g. to retrieve a possible
DSP panic dump via "exception" debugfs node. If
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in
cache is stale. If debugfs cache is not used, the region simply cannot
be read.
To allow debugging these scenarios, update the debugfs cache contents in
resume error handler. User-space can then later retrieve DSP panic and
other state via debugfs (requires SOF debugfs cache to be enabled in
build).
Reported-by: Curtis Malainey <cujomalainey@chromium.org
Link: https://github.com/thesofproject/linux/issues/4274
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512104638.21376-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The commands in sof_ipc_dai_config.flags are encoded as bits:
1 (bit0) - hw_params
2 (bit1) - hw_free
4 (bit2) - pause
These are commands, they cannot be combined as one would assume, for
example
3 (bit0 | bit1) is invalid.
This can happen right at the second start of a stream as at the end of the
first stream we set the hw_free command (bit1) and on the second start we
would OR on top of it the hw_params (bit0).
Fixes: b66bfc3a98 ("ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230512110317.5180-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
When an error occurs, we need to make sure the device can pm_runtime
suspend instead of keeping it active.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512103315.8921-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
When an error occurs, we need to make sure the device can pm_runtime
suspend instead of keeping it active.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512103315.8921-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
When a firmware IPC error happens during a pm_runtime suspend, we
ignore the error and suspend anyways. However, the code
unconditionally increases the runtime_pm counter. This results in a
confusing configuration where the code will suspend, resume but never
suspend again due to the use of pm_runtime_get_noresume().
The intent of the counter increase was to prevent entry in D3, but if
that transition to D3 is already started it cannot be stopped. In
addition, there's no point in that case in trying to prevent anything,
the firmware error is handled and the next resume will re-initialize
the firmware completely.
This patch changes the logic to prevent suspend when the device is
pm_runtime active and has a use_count > 0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512103315.8921-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
These registers enable the HDaudio DMA hardware to split/merge data
from different PDIs, possibly on different links.
This capability exists for all types of HDaudio extended links, but
for now is only required for SoundWire. In the SSP/DMIC case, the IP
is programmed by the DSP firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
We defined the values but never initialized it for SoundWire/SSP, fix
this miss.
A Fixes: tag is not provided as instance_offset was not used so far,
so nothing was really broken. This patch is only required for the
SoundWire support in the following patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
We mix the use of hlink->ml_addr and the 'ml_addr' parameter. It's the
same thing, let's align on using the parameter.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The base_ptr value needs to be derived from the remap_addr pointer,
not the ml_addr. This base_ptr was used only in debug logs that were
so far not contributed upstream so the issue was not detected. It
needs to be fixed for SoundWire support on LunarLake.
Fixes: 17c9b6ec35 ("ASoC: SOF: Intel: hda-mlink: add structures to parse ALT links")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Same functionality as for DMIC/SSP with different ID.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
In hindsight it was a very bad idea to use the same refcount for
Extended and 'legacy' HDaudio multi-links. The existing solution only
powers-up the first sublink, which causes SoundWire and SSP tests to
fail when more than one DAI is used concurrently. Solving this problem
requires per-sublink refcounting, as suggested in this patch.
The existing refcounting remains for 'legacy' HdAudio links, mainly to
avoid changing the obscure programming sequence in
snd_hdac_ext_bus_link_put().
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512174611.84372-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Many ASoC drivers are using dummy DAI.
I have 2 concern about it. 1st one is there is no guarantee that local
strings ("snd-soc-dummy-dai", "snd-soc-dummy") are kept until the card
was binded if it was added at subfunction.
2nd one is we can use common snd_soc_dai_link_component for it.
This patch-set adds common asoc_dummy_dlc, and use it.
Function mt8186_get_reply() performs practically the same operation
as the common snd_sof_ipc_get_reply() helper: removing the custom
function allows us to simply perform a call to the sof-priv helper
snd_sof_ipc_process_reply(), simplifying and shortening this driver
and getting all the benefits of using a common API.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20230503113413.149235-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org
Function mt8195_get_reply() performs practically the same operation
as the common snd_sof_ipc_get_reply() helper: removing the custom
function allows us to simply perform a call to the sof-priv helper
snd_sof_ipc_process_reply(), simplifying and shortening this driver
and getting all the benefits of using a common API.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20230503113413.149235-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org
At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=7XGG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Last minute patch for correct the pasue/resume operation with IPC4. The
issues are hardto reproduce and needs extended stress testing to be hit,
in which case the audio breaks due to DMA errors.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Simplify IPC messages to avoid passing a reply structure that is not
used later.
Suspending to S0iX with IPC3 requires the PM_GATE IPC to be sent again
to stop the DMA trace. But with IPC4, this is not needed as the trace is
stopped with the LARGE_CONFIG_SET IPC. Also, sending the MOD_D0IX IPC to
set the D0I3 state again when the DSP is in D0I3 already results in an
imbalance in PM runtime states in the firmware. So split the
set_power_state ops for IPC3 and IPC4 to avoid sending the MOD_D0IX IPC
when the DSP is already in D0I3 with IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420104714.29573-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of IPC4, a pipeline is only paused during STOP/PAUSE/SUSPEND
triggers and the FW keeps the host DMA running when a pipeline is
paused. The start/stop tests iterate through STOP/START triggers without
involving a hw_free. This means that the pipeline state will only toggle
between PAUSED (during the STOP trigger) and RUNNING (during the START
trigger). So this test should be treated in the same way as a
PAUSE_PUSH/PAUSE_RELEASE test and the DMA should be kept running when
toggling the pipeline states between PAUSED and RUNNING.
Since there is no way to tell if a STOP trigger will be followed by hw_free
or not, this patch proposes to always skip DMA stop during the STOP trigger
and handle it later during hw_free. Introduce a new flag in struct
sof_ipc_pcm_ops, delayed_platform_trigger, that will be used to ensure that
the host DMA will not be stopped during the STOP/PAUSE/RELEASE triggers
and set it for IPC4. The platform_trigger call to stop the DMA will be
invoked during PCM hw_free instead when the pipeline is reset.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FW does not pause/stop the host DMA during pause and stopping the
host DMA from the driver could result in an unknown behaviour. So, skip
triggering the HD-Audio host DMA during pause/release.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert all existing calls that pass "NULL, 0" for reply data to the new
no_reply calls. Also convert any calls that pass in data but don't
actually parse the result.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230419194057.42205-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
95% of the calls inside SOF to TX an IPC don't care about a reply. Yet
the previous commit cleaned up a bunch of replies that were being
populated and then thrown away. This adds some functions so users who do
not need replies don't feel obligated to provide the space to the API.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230419194057.42205-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch to make DSPless mode work even if the DSP is
disabled in BIOS missed to touch the MTL code to add
the needed checks.
If the DSP is disabled this can lead to page fault due to not
accesible registers.
Fixes: 9fc6786f54 ("ASoC: SOF: Intel: hda: make DSPless mode work with DSP disabled in BIOS")
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230412061457.27937-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series adds the core support to handle the recently updated
HDaudio multi-link support to hanlde non HDA links, like SoundWire/DMIC/SSP on
Intel platform.
For details, please see the first patch which documents the current mlink
support (introduced at Skylake) and the new extensions, arriving with LNL.
There is no change in functionality for existing HDA support, the extension is
backwards compatible with existing implementations.
The format_val is a set of bitfileds, printing it as a decimal just makes
interpreting it complicated.
In other HDA core code the format_val is printed as hexadecimal also.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230406155219.18997-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wake IO1 from power gating if there is SoundWire enabled link discovered
by ACPI scan.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230406154454.18163-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire usages, we need to use the global eml_lock to
serialize/protect all accesses to shared registers. Due to the split
implementation across two subsystems, we need to pass a pointer
around.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For DMIC and SSP, the DSP will be responsible for programming the
blobs and link registers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Small helpers to make DAI ops simpler.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each SoundWire peripheral can be programmed from the manager side
either with a regular command FIFO, or with the HDaudio CORB/RIRB
DMA-based mechanism. The mapping between SoundWire peripheral and SDI
address is handled with the LSDIID register.
This mapping only works of course if each peripheral has a unique
address across all links. This has already been enforced in previous
Intel contributions allowing for an IDA-based solution for the device
number allocation.
The checks on the dev_num are handled at the SoundWire level, but the
locking is handled at the hda-mlink level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This helper is an optimization where sync_go is only called when the
cmdsync field is actually set to a non-zero value.
Since this is also only used by SoundWire for now, only expose the
_unlocked version.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The multi-link synchronization uses the same concept and registers,
but moved to the HDAudio extended links.
Add helpers for sync_arm and sync_go which are the basic for the bus
reset, bank switch and clock stop.
Since SoundWire is the only user of those helpers, only expose the
_unlocked versions for now.
Note that SYNCGO is a write-only bit, so no error can be reported. We
still return 0 for compatibility with the SoundWire stream management
headers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These helpers configure the ratio between the base clock and the
hardware signal used for link synchronization.
The SYNCPRD is written before the first sublink is powered-up. The
SYNCPU bit is set, but it will only be cleared after the link is
powered-up, hence the implementation with a set/wait pattern.
These helpers are currently only needed by SoundWire support, where
the lock is taken at a higher level, so only the _unlocked versions
are exposed for now.
Note that the _wait_bit() implementation is similar to previous
helpers in drivers/soundwire, but with sleep duration and timeout
aligned with hardware recommendations. If desired, this helper could
be modified in a second step with e.g. readl_poll_timeout().
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When INTC is set, LCTL exposes INTEN and INTSTS fields.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is needed for SoundWire integration.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The updated SoundWire Intel driver will need to rely on Extended
HDaudio links for power management, but it doesn't need to be aware of
all the HDaudio structures. Add convenience helpers to avoid polluting
SoundWire drivers too much with HDaudio information.
Since the SoundWire/Intel solution already takes the lock at a higher
level, the _unlocked PM helpers are used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helpers to program SPA/CPA bits, using a mutex to access the
shared LCTL register if required.
All links are managed with the same LCTLx.SPA bits. However there are
quite a few implementation details to be aware of:
Legacy HDaudio multi-links are powered-up when exiting reset, which
requires the ref_count to be manually set to one when initializing the
link.
Alternate links for SoundWire/DMIC/SSP need to be explicitly
powered-up before accessing the SHIM/IP/Vendor-Specific SHIM space for
each sublink. DMIC/SSP/SoundWire are all different cases with a
different device/dai/hlink relationship.
SoundWire will handle power management with the auxiliary device
resume/suspend routine. The ref_count is not necessary in this case.
The DMIC/SSP will by contrast handle the power management from DAI
.startup and .shutdown callbacks.
The SSP has a 1:1 mapping between sublink and DAI, but it's
bidirectional so the ref_count will help avoid turning off the sublink
when one of the two directions is still in use.
The DMIC has a single link but two DAIs for data generated at
different sampling frequencies, again the ref_count will make sure the
two DAIs can be used concurrently.
And last the SoundWire Intel require power-up/down and bank switch to
be handled with a lock already taken, so the 'eml_lock' is made
optional with the _unlocked versions of the helpers.
Note that the _check_power_active() implementation is similar to
previous helpers in sound/hda/ext, with sleep duration and timeout
aligned with hardware recommendations. If desired, this helper could
be modified in a second step with .e.g. readl_poll_timeout()
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For backwards compatibility, HDaudio/iDISP links are powered-on when
exiting reset, and the existing driver forces them to be powered-off
when entering S0ix. In addition, the get/put helpers are invoked
directly by the ASoC codec drivers, which a historical layering
violation.
Extended links are powered-on by software only, during the probe and
DAI startup phases. This calls for a different handling of the
'regular' and 'extended' audio links.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend hdac_ext_link to store information needed for ALT
links. Follow-up patches will include more functional patches for
power-up and down.
Note that this patch suggests the use of an 'eml_lock' to serialize
access to shared registers. SoundWire-specific sequence require the
lock to be taken at a higher level, as a result the helpers added in
follow-up patches will provide 'unlocked' versions when needed.
Also note that the low-level sequences with the 'hdaml_' prefix are
taken directly from the hardware specifications - naming conventions
included. The code will be split in two, with locking and linked-list
management handled separately to avoid mixing required hardware setup
and Linux-based resource management.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some of the functions will be used for SoundWire enumeration and power
management, to avoid cycles in module dependencies and simplify
integration all the HDaudio multi-link needs to move to a dedicated
module.
Drop no longer needed headers at the same time.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add return value - this will need additional work in the caller.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use list_for_each_entry_safe() instead of open-coding.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure SoundWire lcount helpers have unique error logs, but a
common pattern for reporting issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230406152937.15347-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With PCI if the device was suspended it is brought back to full
power and then suspended again.
This doesn't happen when device is described via DT.
We need to make sure that we tear down pipelines only if the device
was previously active (thus the pipelines were setup).
Otherwise, we can break the use_count:
[ 219.009743] sof-audio-of-imx8m 3b6e8000.dsp:
sof_ipc3_tear_down_all_pipelines: widget PIPELINE.2.SAI3.IN is still in use: count -1
and after this everything stops working.
Fixes: d185e0689a ("ASoC: SOF: pm: Always tear down pipelines before DSP suspend")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230405092655.19587-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for tgl/adl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for skl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for mtl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for icl/jsl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for cnl/cfl/cml family to
allow DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for apl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the DSP is disabled in the BIOS, the DSP_BAR and PP_BAR cannot be
accessed.
One possible objection noted in initial reviews is that this patch
adds a number of branches. However the number of branches is actually
limited in probe/suspend/resume routines mostly, so there isn't really
a degradation in terms of readability and maintainability. Adding yet
another level of abstraction/ops/callbacks would increase complexity
and not really help in terms of code reuse or readability and
maintainability. A split between controller and DSP driver would be
even more invasive.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Via the SOF_DBG_DSPLESS_MODE sof_debug flag the SOF stack can be asked to
not use the DSP for audio.
The use of DSPless mode is governed by the sdev->dspless_mode_selected
flag which is only going to be set if the user sets sof_debug=0x8000 and
the platform advertises that the DSPless mode is supported on them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not all interfaces (SSP/DMIC/HDA/SDW) are available on all platforms.
If the interface is not even supported then there is no point in executing
a probe or query for that interface.
Introduce a simple function (hda_get_interface_mask) to query the
interfaces supported on the platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Via the SOF_DBG_DSPLESS_MODE sof_debug flag the SOF stack can be asked to
not use the DSP for audio.
The core's support for DSPless mode is only going to be enabled if the
platform reports that it can be used without DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSPless mode of the ASoC/SOF driver can be used for hardware
verification and debug on platforms with HDaudio codecs. The DSP mode is
still needed on existing platforms for SSP, DMIC, SoundWire interfaces
managed by the GP-DMA.
This mode is also helpful to compare the legacy HDaudio driver with the
ASoC/SOF driver wrt. codec management and handling. In theory we use the
same code but differences are sometimes seen on jack detection and event
handling.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only access hext_stream->hstream after it has been checked for NULL pointer
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP SOF driver supports different audio configurations.
Explicit condition check for I2S configuration will break
other audio endpoint configurations.
acp_dai_probe() function is not required as we have
machine select logic to select the exact machine.
Remove acp_dai_probe() from existing AMD PCI driver code base.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During initial SOF driver bring up on AMD platforms, only DMIC
support was added. As of today, we have a complete SOF solution for
I2S endpoints along with DMIC endpoint.
This code is no longer required.
Remove unused code from RMB and RN platform ACP PCI driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original patch uses a feature in lib/vsprintf.c to handle the invalid
address when tring to print *_fw_module->man4_module_entry.name when the
*rc_fw_module is NULL.
This case is handled by check_pointer_msg() internally and turns the
invalid pointer to '(efault)' for printing but it is hiding useful
information about the circumstances. Change the print to emmit the name
of the widget and a note on which side's fw_module is missing.
Fixes: e3720f92e0 ("ASoC: SOF: avoid a NULL dereference with unsupported widgets")
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/alsa-devel/4826f662-42f0-4a82-ba32-8bf5f8a03256@kili.mountain/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Rule: 'Cc: stable@vger.kernel.org' or 'commit <sha1> upstream.'
Link: https://lore.kernel.org/r/20230403090909.18233-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If an IPC4 topology contains an unsupported widget, its .module_info
field won't be set, then sof_ipc4_route_setup() will cause a kernel
Oops trying to dereference it. Add a check for such cases.
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230329113828.28562-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There was a missing mutex_unlock() in sof_ipc4_widget_free()
use_chain_dma if-branch that caused a static analysis error. The
branch should not be used in a normal working configuration and if its
used its an indication of a bad topology. Add missing mutex_unlock()
and a warning print if the if-branch is taken, and another warning
print to a symmetric place in sof_ipc4_widget_setup().
Fixes: ca5ce0caa6 ("ASoC: SOF: ipc4/intel: Add support for chained DMA")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202303222050.dCw0fPCW-lkp@intel.com/
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Link: https://lore.kernel.org/r/20230322181830.574635-1-jyri.sarha@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recommended sequence for triggering the host DMA is to first program
the DMA in the FW before setting the RUN bit to start the stream in the
host. With IPC3, this sequence is honored because the FW programs the
DMA when the HW_PARAMS IPC is sent during PCM hw_params and then the host
sets the RUN bit during sof_pcm_trigger(). But with IPC4,
sof_pcm_trigger() sends the SET_PIPELINE_STATE IPC to program the DMA in
the FW after the DMA RUN bit is set.
In order to minimize the impact for IPC3, introduce a new flag as part
of struct sof_ipc_pcm_ops, ipc_first_on_start, which will be set for IPC4
only. With this flag set, the SET_PIPELINE_STATE IPC will be sent before
the DMA RUN bit is set by the host during the START/PAUSE_RELEASE
triggers.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322094346.6019-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of IPC4, since there is no PCM_PARAMS IPC to send the new
stream tag when restarting a stream without a hw_free, the original
stream tag needs to be preserved. So, add new a flag as part of struct
sof_ipc_pcm_ops, reset_hw_params_during_stop and set it only for IPC3.
This will ensure that the host DMA stream tag will not be given up during
the STOP trigger for IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322094346.6019-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of repeated start/stop without involving hw_free, the stream
tag needs to be preserved for the subsequent starts. So, skip performing
the DMA clean up during stop and handle it only during suspend or
hw_free.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322094346.6019-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The set_get_data() IPC op bypasses the check for the no_pm flag as done
with the regular IPC tx_msg op. Since set_get_data should be performed
when the DSP is in D0I0, set the DSP power state to D0I0 before sending
the IPC's in sof_ipc4_set_get_data().
Fixes: ceb89acc4d ("ASoC: SOF: ipc4: Add support for mandatory message handling functionality")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230322085538.10214-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
On a platform when the DSP is in use, we cannot select individual links
to use or not use the DSP, it is either all or none. On some audio
endpoint, like HDMI/DP, it is preferred to not use any processing in DSP
to reduce the latency and to allow bytestream pass-through (DTS, DD,
etc)
IPC4 introduces a new type of end-to-end connection within the DSP which
is using the host DMA and link DMA in a single buffer, working
back-to-back, passing the received data without looking at it or trying
to understand the format, content.
This mode reduces the latency and allows non PCM streams to be sent from
userspace.
The feature is enabled per PCM bases, signalled in topology.
The patch adding the bytes control support moved the error check outside
of the list_for_each_entry() which was not correct as at the end of the
list_for_each_entry() the scontrol will no longer point where the error
happened, but it to the list head.
Restore the original logic and return on the first error with the error
code.
Fixes: a062c8899f ("ASoC: SOF: ipc4-control: Add support for bytes control get and put")
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/alsa-devel/6be945d2-40cb-46fb-67ba-ed3a19cddfa4@linux.intel.com/T/#t
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321145651.9118-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add logic for setting up and tearing down chained DMA connections.
Since pipelines are not used, all the logic to set the pipeline states
can be bypassed, with only the DMA programming sequences remaining. In
addition the same format needs to be used for host- and link-DMA,
without the usual fixup to use the S32_LE format on the link.
Note however that for convenience and compatibility with existing
definitions, the topology relies on the concept of pipelines with a
'USE_CHAIN_DMA' token indicating that all the logic shall be bypassed.
Unlike 'normal' ALSA sequences, the chain DMA is not programmed in
hw_params/hw_free. The IPC message to set-up and tear-down chained DMA
are sent in sof_ipc4_trigger_pipelines(), but the contents prepared
earlier.
Chained DMA is only supported by the Intel HDA DAI for now, and only
S16_LE and S32_LE formats are supported for now.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set up the IPC structure for scheduler widgets and set the pipeline widget
before updating the IPC structures for all widgets. This will be needed to
look up pipeline information during IPC structure set up.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series will add support for IPC4 process modules as effect
widgets. We can cover wide range of modules as a generic process or
effect module, the patches will lay down the fundation and the generic
code to handle them.
At initialization time process modules can receive additional
information on top of the base_cfg, which is defined as base_cfg_ext, an
extension for the base configuration struct. Other parameters or blobs
for these modules are sent as a separate message via
LARGE_CONFIG message, which is handled by the existing bytes control support.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Backend DAIs may support multiple audio formats. Modify pipeline setup to select
a suitable configuration based on topology and frontend DAI runtime configuration.
The prime use case is BT offload support where we need the abality to select
different configuration on the BE side.
If the available_fmt->num_input_formats is 0 and there is a failure during
the output format parsing then a kfree() would be called on the
uninitialized in_format pointer.
By initializing the in_format to NULL, this error can be avoided.
Fixes: 7ab6b1e830 ("ASoC: SOF: ipc4-topology: Modify the type of available input/output formats")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230317063524.8280-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some modules may modify the audio format during processing. So, update the
pipeline params based on pin 0's output format during process prepare.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The copier output pin 0 format is set with module instance
initialization, format for additional copier output pin
should be set before the pin is used.
If a process module is connected to additional copier output
pin, the copier output pin format should be set according to
the corresponding input pin format of the process module.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some processing modules need the audio formats for all their input and
output pins appended to the base config during module init. So add support
for building the base config extension using the available pin formats
from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The modules currently supported by the SOF firmware use the base module
config containing the audio format for the input/output pin 0 for
initialization. But some processing modules with multiple input/output
pins require the audio formats to be sent with the init instance IPC
payload. Modules that require the base config extension will need to
indicate this in the module information in the firmware manifest.
Introduce a new struct sof_ipc4_base_module_cfg_ext which contains the
pin formats for the input and output pins. This will be appended to the
init instance IPC payload for modules that require it.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the general support of IPC4 effect widgets.
IPC4 effect widgets, known as process modules, can be EQFIR,
EQIIR, KEYWORD_DETECT, KPB, CHAN_SELECTOR, SMART_AMP and etc.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a helper function to update the message template for a kcontrol
associated with a widget.
In this way the helper can be re-used by other components later.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the ipc4_set_fmt_mask() helper function instead of open-coding
the logic in multiple places.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316141458.13940-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Backend DAIs may support multiple audio formats. Modify pipeline
setup to select a suitable configuration based on topology and
frontend DAI runtime configuration.
For sampling rate, if one of the BE DAI configurations has
a sampling rate matching that of FE DAI, configure BE DAI to
this rate.
For sample format, the current code hardcodes DAI copier sample format
to 32bit for both playback and capture pipelines. This is not always
desired, so lift the limitation and set the sample format based on
topology definitions for the copiers. For capture pipelines, we want to
set the BE DAI pipeline format based on topology instead of using the FE
DAI format. This covers the common use-case where BE DAI outputs data at
a higher sample precision and sample width is reduced later in the
pipeline. Instead of hardcoding to 32bit, use the BE DAI copier output
format defined in topology.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316141458.13940-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The modules in IPC4 can have multiple 'pins' on their input and output
and these pins can receive or output audio in different formats.
Currently we assume that all pins are using the same format which is a
limitation that needs to be lifted in order to support more complex
components.
This series will extend and rework the format handling to allow
different formats on pins.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series will add support for bytes control and topology types.
With IPC4 only the binary payload is sent to the firmware via LARGE_CONFIG
message (which does similar multi-part message handling as the IPC3 control
message did).
The bytes payload itself is not checked by the kernel but user space expected to
wrap it in sof_abi_hdr struct in order to get the target information of the
binary data.
The SOF firmware and sof-ctl have been updated to support blobs used in IPC4
setups.
During route setup, playback stream routes are setup by going through
sink path, capture stream routes are set up by going through source path.
This is not sufficient to handle loopback cases between pipelines
configured with different directions, e.g. a sidetone or an amplifier
feedback connected to a speaker protection module. So, add the logic to
handle such routes between widgets that aren't in the list of DAPM widgets
associated with the same PCM.
Link: https://github.com/thesofproject/linux/issues/4042
Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313101302.20950-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Base config only contains the input/output audio formats for pin 0. So
match only the pin 0 formats during runtime format selection.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for handling processing modules with different
input/output pin counts, introduce two new tokens for input/output
audio format counts. Use these token values to parse all the available
audio formats from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the field in struct sof_ipc4_available_audio_format and pass the
format list to be searched as an argument to sof_ipc4_init_audio_fmt()
directly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only the copier needs to set the output format in its IPC payload. So
move the code to set the output format inside
sof_ipc4_prepare_copier_module() and modify the signature of
sof_ipc4_init_audio_fmt() to remove the out_format argument.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a new struct sof_ipc4_pin_format which contains the pin index
and the buffer size. Replace the type of available input/output audio
formats in struct sof_ipc4_available_audio_format with this new struct
type and rename them to input_pin_fmts and output_pin_fmts.
Also, add a new token, SOF_TKN_CAVS_AUDIO_FORMAT_PIN_INDEX that will be
used to parse the pin index for the audio format from topology.
Currently we only set the audio format for Pin 0 in topology, so the
default value will be 0 for all audio formats.
Finally, parse the pin_index and the input/output buffer sizes
along with audio formats into the pin_format arrays in struct
sof_ipc4_available_audio_format. This makes the base_config array in struct
sof_ipc4_available_audio_format redundant. So remove it. This change
will allow the addition of audio formats for the non-zero pins in
topology transparent to the topology parser in the kernel.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse the output formats available in topology always. Whether the
output format is sent in the init instance payload or not is decided
when sof_ipc4_init_audio_fmt() is invoked.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to parse the cpc and is_pages values multiple times.
It is enough to parse the 2 tokens directly into the base_config field
in each module's init_instance IPC payload.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not parse the SOF_TKN_CAVS_AUDIO_FORMAT_DMA_BUFFER_SIZE token as the
dma_buffer_size can be derived from the input/output buffer size and the
type of widget during copier prepare. For the deep buffer case,
introduce a new token that will be used to get the deep buffer DMA size
for the host copier from topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new field, input_audio_fmts, in struct
sof_ipc4_available_audio_format and parse all the available input audio
formats into this new field and not into the base_config field. This is
preparation to remove the base_config array from the struct
sof_ipc4_available_audio_format.
This simplifies the sof_ipc4_init_audio_fmt()
function as the reference audio format for matching with input params
has the same size.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we use input/output and sink/source pins interchangeably.
Remove the references to sink/source pins and replace with input/output
pins everywhere for consistency and clarity.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for bytes control by implementing bytes_get/put and
bytes_ext_get/put and blobs with either module init instance or
large config type.
For module init instance type the put will only update the stored
configuration blob and it is going to be taken into use next time the
module is (re-)initialized.
Large config type of blobs are sent to the firmware whenever the DSP is
powered up.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add byte type support for IPC4. The bytes controls are used to transfer
configuration blobs to/from firmware via large_config messages.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure sof_ipc4_set_volume_data() is only called for the
SND_SOC_TPLG_CTL_VOLSW, SND_SOC_TPLG_CTL_VOLSW_SX and
SND_SOC_TPLG_CTL_VOLSW_XR_SX info_type.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code for bytes_ext_get and bytes_ext_volatile_get is identical with
the only difference is that in case of volatile_get we refresh the data
from the DSP before returning it to user space.
Convert the callbacks to a simple wrapper for the same function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the snd_sof_refresh_control() to sof_ipc3_refresh_control() to
follow the function naming convention for IPC specific code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 2b5a30cafb ("ASoC: SOF: Intel: MTL: Enable
DMI L1").
It came to our attention that the access to the EM2 register is restricted
to the DSP side on MTL compared to prior platforms.
Writing to it from the host side has no effect (negative or positive), it
is better to remove the code to not cause confusion and wrong impression.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230310133454.15362-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series introduces an abstraction of the HDA DAI handling.
The motivation is to simplify and make the code more flexible regarding to IPC
versions, new features (ChainDMA (IPC4) and DSPless mode) and to pave the way for new
platforms.
For the first look the series might feels a bit too intrusive but it introduces
no functionality change (tested at each commit).
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series will add support for handling the core_id token which is
needed for supporting multiple cores with complex topologies.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
We have recently noticed that the ops_free callback was missed for the device
descriptions on Intel platforms.
The DAI widget is freed during FE DAI hw_free and therefore the DAI
config during BE DAI hw_free is redundant.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the post_trigger DMA op for IPC3 and unify the DAI driver ops for
IPC3 and IPC4 for HDA DAI's.
Also, use the post_trigger op to stop the paused streams properly in the
hda_dai_suspend() function. This fixes the suspend while paused case for
IPC4 because previously we weren't resetting the pipeline when suspending
the system with some paused streams.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and use the SOF widget's DMA pre_trigger/trigger/post_trigger ops in
ipc4_hda_dai_trigger().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the topology IPC dai_config to update the dai_config for
HDA DAI widgets.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and use the setup_hext_stream/reset_hext_stream DMA ops during link
hw_params and cleanup.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the get_hext_stream, assign_hext_stream and
release_hext_stream DMA ops for HDA DAIs.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a new ops structure for HDA DAI widget DMA ops and add a new
field to struct snd_sof_dai that will be used to set the ops pointer for
DAI widgets.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to define a new variable and look it up again.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the CPU DAI pointer from the ASoC core to hda_link_dma_hw_params() and
ipc3_hda_dai_trigger(). This will avoid looking up the CPU DAI pointer
multiple times.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the trigger_suspend_stop argument from hda_link_dma_cleanup() and
move the call to snd_hdac_ext_stream_clear() into
snd_hdac_ext_stream_clear(). This is a preparatory step to unify the
trigger ops for IPC3 and IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the struct definition and use the params argument directly.
Also, use the hlink pointer to set the stream ID instead of looking it
up again.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No code change. Just code move from hda_link_dma_params() to
hda_link_dma_hw_params().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the DAI_CONFIG IPC is sent after widget setup and before widget
free, there is no need for the BE DAI DRV ops that do the same thing. So
remove them.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the DSP firmware has crashed, some log messages may be pending in the
mtrace buffer, but not consumed by the driver as no IPC notification has
been sent by the firmware. Check the buffer status for all mtrace slots
and ensure any pending log messages are processed before DSP is possibly
powered down and the log buffer contents is lost.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110846.2265-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A copier blob will be only used when a copier is connected in the
topology. An ALH copier in playback direction that doesn't have any
source means the copier is not connected in the topology. Thus, we
don't need to allocate the blob.
The patch doesn't do the same test before freeing the blob because
the blob is null and it is fine to free null.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110830.2178-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Host Power Management/Clock Control (ULP) Registers in
the HDA BAR shadow the values of the same registers in the DSP BAR,
so let's modify the latter - as done already for other accesses.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095251.3058-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update code to remove mix between legacy and SOF definitions. No
functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095158.2818-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prefixs are unneeded since log level explains the same information
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307115018.5588-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add core token in extended token list for each module to support multi-core
feature.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307123556.31328-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Token SOF_TKN_SCHED_CORE in topology file can specify the target core for
the pipeline, if it is missing it is going to be 0 (as it is right now).
Firmware will double-check all information retrieved by topology and
report errors if required. This will allow policy and changes in
topologies without a need for a synchronized kernel change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230307123556.31328-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent firmware changes modified the curve duration from 32 to 64 bits,
which breaks volume ramps. A simple solution would be to change the
definition, but unfortunately the ASoC topology framework only supports
up to 32 bit tokens.
This patch suggests breaking the 64 bit value in low and high parts, with
only the low-part extracted from topology and high-part only zeroes. Since
the curve duration is represented in hundred of nanoseconds, we can still
represent a 400s ramp, which is just fine. The defacto ABI change has no
effect on existing users since the IPC4 firmware has not been released just
yet.
Link: https://github.com/thesofproject/linux/issues/4026
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110656.1816-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When an IPC error happens while setting-up a widget during the FE
hw_params phase, the existing logic will unwind all previous
configurations but will overwrite the return status. The ALSA/ASoC
logic will then proceed with the prepare and trigger phases, even
though the firmware resources are not available.
Fix by returning the initial error code and ignoring the code returned
in the UNPREPARE phase.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114659.4614-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit a09d82ce0a ("ASoC: SOF: Intel: hda-ctrl: remove
useless sleep")
It was a mistake to remove those delays, in light of comments in the
HDaudio spec captured in snd_hdac_bus_reset_link() that the codec
needs time for its initialization and PLL lock.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095412.3416-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add delay between set and wait command according to hardware programming
sequence. Also add debug log to detect error.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095453.3719-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dmic dai index was set incorrectly to bits 5-7, when it is actually using
just the lowest 3. Fix the macro for setting the bits.
Fixes: aa84ffb721 ("ASoC: SOF: ipc4-topology: Add support for SSP/DMIC DAI's")
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110730.1995-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the removal of widget setup during BE hw_params, the DAI config IPC
is never sent with the SOF_DAI_CONFIG_FLAGS_HW_PARAMS. This means that
the early bit clock feature required for certain codecs will be broken.
Fix this by saving the config flags sent during BE DAI hw_params and
reusing it when the DAI_CONFIG IPC is sent after the DAI widget is set
up. Also, free the DAI config before the widget is freed.
The DAI_CONFIG IPC sent during the sof_widget_free() does not have the
DAI index information. So, save the dai_index in the config during
hw_params and reuse it during hw_free.
For IPC4, do not clear the node ID during hw_free. It will be needed for
freeing the group_ida during unprepare.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114639.4553-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The logic for the ioremap is to find the resource index 3 (IRAM) and
infer the BAR address by subtracting the IRAM offset. The BAR size
defined in hardware specifications is 2MB.
The commit 5947b2726b ("ASoC: SOF: Intel: Check the bar size before
remapping") tried to find the BAR size by querying the resource length
instead of a pre-canned value, but by requesting the size for index 3
it only gets the size of the IRAM. That's obviously wrong and prevents
the probe from proceeding.
This commit attempted to fix an issue in a fuzzing/simulated
environment but created another on actual devices, so the best course
of action is to revert that change.
Reported-by: Ferry Toth <fntoth@gmail.com>
Tested-by: Ferry Toth <fntoth@gmail.com> (Intel Edison-Arduino)
Link: https://github.com/thesofproject/linux/issues/3901
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095341.3222-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the error paths in sof_widget_ready() to free all allocated memory
and prevent memory leaks.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114815.4909-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the sample rate print unit from KHz to Hz.
E.g. 48000KHz becomes 48000Hz.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110751.2053-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_ipc3_rx_msg() checks for minimum size of a new rx message but it is
missing the check for upper limit.
Corrupted or compromised firmware might be able to take advantage of this
to cause out of bounds reads outside of the message area.
Reported-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114917.5124-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The first patch will improve the managing of DMI L1 by tracking it's
enabled/disabled state to avoid unconditional changes to it's state.
The remaining two patch will enable the DMI L1 for MTL platforms (ACE 1.0)
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members, instead.
Use the DECLARE_FLEX_ARRAY() helper macro to transform zero-length
arrays in unions with flexible-array members.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
sound/soc/sof/ipc4-control.c:176:77: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:78:29: warning: array subscript 0 is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:80:33: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:95:53: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:96:53: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:93:53: warning: array subscript 0 is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:140:58: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:141:29: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-control.c:142:29: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-topology.c:1475:36: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
sound/soc/sof/ipc4-topology.c:1476:36: warning: array subscript i is outside array bounds of ‘struct sof_ipc4_ctrl_value_chan[0]’ [-Warray-bounds=]
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/258
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/Y/gyIg1qZduhigPi@work
Signed-off-by: Mark Brown <broonie@kernel.org>
DMI L1 should be enabled unconditionally after FW boot is complete.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230220075804.4829-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The workaround to disable DMI L1 should be restricted to only the CAVS
IP's.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230220075804.4829-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a workaround in place to address a known issue with host DMA
running into xruns when capture streams are running. But when resuming
from Sx, we unconditionally re-enable DMI L1 without taking the
workaround into account and this could lead to xruns when a suspended
capture stream is restarted.
To fix this rename the flag l1_support_enabled to l1_disabled in struct
sof_intel_hda_dev to save the L1 disabled status which can be
set/cleared when we get/put a stream and use the flag to determine if DMI
L1 should enabled or not during the post_fw_run op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230220075804.4829-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works,
and not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements
-----BEGIN PGP SIGNATURE-----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=9s9c
-----END PGP SIGNATURE-----
Merge tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works, and
not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements"
* tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits)
ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
ASoC: soc-ac97: Return correct error codes
ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
ASoC: cs35l45: Remove separate namespace for tables
ASoC: cs35l45: Remove separate tables module
ASoC: soc-ac97: Convert to agnostic GPIO API
ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi"
ALSA: hda: cs35l41: Enable Amp High Pass Filter
ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded
ALSA: hda: cs35l41: Correct error condition handling
ASoC: codecs: wcd934x: Use min macro for comparison and assignment
ASoC: Intel: Skylake: Fix struct definition
ASoC: tlv320adcx140: extend list of supported samplerates
ASoC: imx-pcm-rpmsg: Remove unused variable
SoC: rt5682s: Disable jack detection interrupt during suspend
ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3
ASoC: SOF: Intel: Enable d0i3 work for ipc4
ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg
ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version
ASoC: SOF: Introduce a new set_pm_gate() IPC PM op
...
The HDaudio stream allocation is done first, and in a second step the
LOSIDV parameter is programmed for the multi-link used by a codec.
This leads to a possible stream_tag leak, e.g. if a DisplayAudio link
is not used. This would happen when a non-Intel graphics card is used
and userspace unconditionally uses the Intel Display Audio PCMs without
checking if they are connected to a receiver with jack controls.
We should first check that there is a valid multi-link entry to
configure before allocating a stream_tag. This change aligns the
dma_assign and dma_cleanup phases.
Complements: b0cd60f3e9 ("ALSA/ASoC: hda: clarify bus_get_link() and bus_link_get() helpers")
Link: https://github.com/thesofproject/linux/issues/4151
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230216162340.19480-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's been quite a lot of activity this release, but not really
one big feature - lots of new devices, plus a lot of cleanup and
modernisation work spread throughout the subsystem:
- More factoring out of common operations into helper functions
by Morimoto-san.
- DT schema conversons and stylistic nits.
- Continued work on building out the new SOF IPC4 scheme.
- Support for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPuKzoACgkQJNaLcl1U
h9AO6wf/Us32gNLnLhT+YaPKouVq4KYpEXDeaIOdOCgs8RtonuCgURZ/D2TkzBVL
EHLPp4QgqdIWo3FKkWgsXIOpO7R0//cj/vpccJ0PBe4VmvDinXq3dzGPPy6ZbHAS
SatE5zItBKRUHaDliRk6S7IFEqJKwwlBqEzV0K41Q4EstYlIe+No0XIVDj3oRjHb
jPmAD9XRPqsDaFFFb0NrVl9M/8HwBlc3j/Gnt19eJB/07IdgIr0S8mJn3qlFfGqu
O8KgBo4+tvVMCQAxTVZ5exb/qTtK3gEPDuMi0eOKJz+g9wMJ4tRz+D8/8TQSmxmW
lWORmNTx8jml7G4KirxIV4q4Lr0hRQ==
=mB3t
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.3
There's been quite a lot of activity this release, but not really
one big feature - lots of new devices, plus a lot of cleanup and
modernisation work spread throughout the subsystem:
- More factoring out of common operations into helper functions
by Morimoto-san.
- DT schema conversons and stylistic nits.
- Continued work on building out the new SOF IPC4 scheme.
- Support for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1.
Enable d0i3 streaming if all the active streams can
work in d0i3 state and playback is enabled.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Schedule a delayed work for d0i3 entry after every non-pm ipc msg.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver shall update the power state to D0i0 before sending
a generic IPC. Power-related IPCs are the exception to the rule,
they may be sent even when the power-state is D0i3
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use set_pm_gate to unify pm gate setting for different
ipc version.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set_pm_gate depends on ipc version. This patch defines
the ops for both IPC3 and IPC4.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230214103345.30669-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MOD_INIT_INSTANCE IPC for a copier only contains the sink format for
output pin 0. Any additional output pins that are used need to have their
sink format set using the LARGE_CONFIG_SET IPC message.
Otherwise, firmware will report error or crash due to NULL format is used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230209142123.17193-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Print the queue ID's during bind/unbind errors as well to make it easier
to see what failed exactly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230209142123.17193-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF driver calls snd_sof_dsp_update8 with parameters mask and value but
the snd_sof_dsp_update8 declares these two parameters in reverse order.
This causes some issues such as d0i3 register can't be set correctly
Now change function definition according to common SOF usage.
Fixes: c28a36b012 ("ASoC: SOF: ops: add snd_sof_dsp_updateb() helper")
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230208104404.20554-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series adds support for the PCM delay reporting in SOF core level
and implements the needed infrastructure with IPC4 to finally enable it for MTL.
Currently this is only supported on MTL (and via IPC4), but with the
infrastructure in place it will be possible to support other platforms with
DeepBuffer.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Today I came across two regressions in next with SOF:
The topology would not load with a failure of creating playback DAI
the first patch is fixing this which was caused by a missing 'else' in the patch
After fixing the topology loading, the module unloading caused kernel panic.
The second patch is correcting that which is I likely caused by copy-paste to
set wrong unload callback for the graph element.
With these patches applied SOF is working on next and modules can be unloaded
My randconfig build setup ran into a rare build failure with
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=m
CONFIG_SOUNDWIRE=y
CONFIG_SOUNDWIRE_INTEL=m
CONFIG_SND_SOC_SOF_HDA=y
CONFIG_SND_SOC_SOF_INTEL_TGL=y
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_init_caps':
hda.c:(.text+0x691): undefined reference to `sdw_intel_cnl_hw_ops'
x86_64-linux-ld: hda.c:(.text+0x6f2): undefined reference to `sdw_intel_probe'
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_sdw_startup':
hda.c:(.text+0x1c40): undefined reference to `sdw_intel_startup'
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_sdw_process_wakeen':
hda.c:(.text+0x1cb6): undefined reference to `sdw_intel_process_wakeen_event'
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_dsp_interrupt_thread':
hda.c:(.text+0x1d67): undefined reference to `sdw_intel_thread'
x86_64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_dsp_remove':
hda.c:(.text+0x2655): undefined reference to `sdw_intel_exit'
My best understanding is that the definition of
SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE was intended to avoid this
problem, but got it wrong for the SND_SOC_SOF_INTEL_SOUNDWIRE=m case,
where the 'select' is meant to set SOUNDWIRE_INTEL to the value of
SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE rather than the intersection of
SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE and SND_SOC_SOF_INTEL_SOUNDWIRE.
Change the condition to check for SND_SOC_SOF_INTEL_SOUNDWIRE to be a
boolean rather than a tristate expression in order to propagate this
as intended.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230202102247.806749-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The delay function is used to calculate the difference
between hw_ptr and dai dma position. I2S, DMIC and SDW will
use dai dma position in shared SRAM window to calculate the
delay. HDaudio will retrieve dai dma position from host mmio memory
space since it doesn't support LLP counter reported by firmware.
In two cases dai dma position is inaccurate for delay calculation
(1) dai pipeline is started before host pipeline
(2) multiple streams mixed into one. Each stream has the same dai
dma position
Firmware calculates correct stream_start_offset for all cases including
above two. Driver subtracts stream_start_offset from dai dma position to
get accurate one.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Get HDaudio link position for current stream delay calculation
from hda registers.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM delay depends on stream position based on hardware
counter to calculate stream delay so add this ops to get
stream position according to hardware counter.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sof framework will call specific delay function for
different IPC version.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the hw_params to init time info for ipc4 delay calculation.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate time info when pcm is loaded by topology
and free it when pcm is unloaded by topology.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Start_stream_offset is used to strip invalid sample count in dai
for some cases like dai is started before host. llp_offset is used
to get current dai position from memory windows.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW can share some information with host driver, .e.g fw status, pipeline
status and volume status. On ipc4 platform it is located in memory
windows 0 with size of struct sof_ipc4_fw_reg.
With this patch, ipc4 driver can find fw information in fw_info_box
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ipc4_fw_reg defines the content of memory window 0 shared by fw.
Host driver can get fw information by data structure defined in
this file.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As interrupts are Level-triggered,unless and until we deassert the register
the interrupts are generated which causes spurious interrupts unhandled.
Now we deasserted the interrupt at top half which solved the below
"nobody cared" warning.
warning reported in dmesg:
irq 80: nobody cared (try booting with the "irqpoll" option)
CPU: 5 PID: 2735 Comm: irq/80-AudioDSP
Not tainted 5.15.86-15817-g4c19f3e06d49 #1 1bd3fd932cf58caacc95b0504d6ea1e3eab22289
Hardware name: Google Skyrim/Skyrim, BIOS Google_Skyrim.15303.0.0 01/03/2023
Call Trace:
<IRQ>
dump_stack_lvl+0x69/0x97
__report_bad_irq+0x3a/0xae
note_interrupt+0x1a9/0x1e3
handle_irq_event_percpu+0x4b/0x6e
handle_irq_event+0x36/0x5b
handle_fasteoi_irq+0xae/0x171
__common_interrupt+0x48/0xc4
</IRQ>
handlers:
acp_irq_handler [snd_sof_amd_acp] threaded [<000000007e089f34>] acp_irq_thread [snd_sof_amd_acp]
Disabling IRQ #80
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20230203123254.1898794-1-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion to use generic helpers missed the else for the dai
direction check which leads to failure when loading playback widgets
Fixes: 323f09a61d ("ASoC: sof: use helper function")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230201112846.27707-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the pipeline setup fails at the first widget/pipeline then we will have
no spipe stored under the pipeline_list->pipelines, the
pipeline_list->count is 0.
If this is the case we would have a NULL pointer dereference if the
execution is allowed to proceed.
Check for this condition along with the pipeline_list->pipelines check
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use_count of the swidget is protect by ALSA core PCM locking with the
exception when an associated kcontrol is changed.
It has been observed that a rightly timed kcontrol access during stream
stop can result of an attempt to send a control update to a widget which
has been freed up between the check of the use_count and the message
sending.
We need to protect the entire sof_widget_setup() and sof_widget_free()
execution to make it safe to rely on the use_count.
Move the code under an _unlocked() function and use a mutex to protect
the execution of the functions for concurrency.
On the control path we need to use the lock only for the kcontrol access,
the widget_kcontrol_setup() op is called with the lock already held.
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_widget_free() on the error path will decrement the use count and if
we jump to widget_free: then the use_count will be decremented by two,
which is not correct as we only incremented once with 1.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When starting/stopping multiple streams in parallel, pipeline triggers
and pipeline frees can get interleaved. So use the same mutex used for
pipeline trigger to protect the pipeline frees as well. Rename the
trigger_mutex to pipeline_state_mutex for more clarity.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the started_count and paused_count to implement reference counting
when making decisions to start/stop/pause pipelines during the FE DAI
trigger. This is necessary to trigger the shared pipelines in the FE DAI
trigger properly.
With IPC4, the FE trigger will issue multiple pipeline state changes,
and the triggers are propagated downstream to connected pipelines by
the SOF driver - not the firmware. This creates a window for race
conditions where an FE trigger preempts another one, which results
in inconsistent pipeline states and refcounts.
This patch introduces a mutex lock for the pcm trigger that guarantees
that IPC4 state and resources are accessed in a serialized manner.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For more clarity, rename the struct ipc4_pipeline_set_state_data
variable to trigger_list instead of data. No functionality change.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce struct snd_sof_pipeline to save the information about
pipelines including the pipeline widget, their status wrt how many PCM's
are using them and whether they are complete or not.
In struct snd_sof_widget, replace pipe_widget with spipe and remove
complete. In struct snd_sof_pcm_stream_pipeline_list, replace
pipe_widgets with pipelines.
Update all users accordingly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the list of pipelines in the PCM stream's pipeline info to trigger
the pipelines in the right order. Add a helper for triggering pipelines
in batch mode that will be used to trigger multiple pipelines at the
same time.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Populate the pipeline_info for the PCM stream with the list of pipeline
widgets that need to be handled during the PCM trigger. This will be
used in the IPC-specific PCM trigger op to trigger the pipelines.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new flag, skip_during_fe_trigger, to struct sof_ipc4_pipeline to
skip triggering pipelines in the FE DAI trigger. Set this flag for the
HDA DAI BE pipelines so that their BE pipeline will not be triggered in
the FE DAI trigger. Also, move the trigger handling for all commands
include START/PAUSE_RELEASE for the HDA DAI's to the backend DAI trigger
ops.
For the SSP/DMIC/SDW cases, remove the BE DAI trigger as they involve no
DMA operations and can be triggered in the FE DAI trigger. This is in
preparation to perform batch triggering of all pipelines for the non-HDA
case.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the pcm_setup/pcm_free ops for IPC4. Define a new struct
snd_sof_pcm_stream_trigger_info and add a new field trigger_info of this
type to struct snd_sof_pcm_stream. This will be used to save the list of
pipelines that need to be triggered.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These will be used to perform IPC-specific PCM setup/free.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new topology IPC op to set up DAI links and set the link trigger
order to match the expectation based on the IPC type. Note that the
link_setup op implementations for IPC3 and IPC4 are not identical and
have contrasting trigger orders for playback and capture.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
IPC3 and IPC4 have different requirements for the order in which the FE
CPU and BE CPU DAI trigger callbacks must be invoked. With a regular PCM
start/stop, pipeline widgets are set up during hw_params and freed
during hw_free.
But when the system is suspended when a PCM is running,
pipeline widgets are freed during the SUSPEND trigger callback for the
FE CPU DAI. In order to avoid freeing the pipeline widgets before the BE
CPU DAI trigger is executed, the trigger order was modified in previous
contributions in the PCM dai_link_fixup callback to make sure that the BE
CPU DAI trigger stop/suspend is always invoked before the FE CPU DAI
trigger. But this contradicts the firmware requirement for IPC4 w.r.t.
ordering of pipeline triggers.
So, remove the freeing of pipeline widgets during FE CPU DAI suspend
trigger and handle it during system suspend when the
tear_down_all_pipelines() IPC op is invoked. This will be followed up
with a patch to fix the trigger order for IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When walking the list of the widgets from the source to the sink, we
accidentally also end up preparing/setting up the widgets that are not
in the list of connected DAPM widgets associated with the PCM. Avoid
this by checking if a widget is part of the connected DAPM widget list
during widget prepare, unprepare, setup or free.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Calling the sof_widget_setup/free() for the DAI/AIF widgets inside the
snd_soc_dapm_widget_for_each_sink_path() loop will end up setting up or
freeing the widget multiple times if there are multiple paths leaving
the widget. Fix this by moving the widget setup/free for the starting
widget in each path outside the loop.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FW currently ignores unbinding routes if the source and sink widgets
belong to the same pipeline. So no need to send the IPC at all in the
first place.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230127120031.10709-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we use the same channel mask for aggregated speakers.
It works fine for playback because we duplicate the audio data for all
aggregated speakers. But we need to get audio data from each aggregated
speaker and combine them to the captured audio. So we need to set
non-overlapping channel mask for aggregated ALH DAIs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230125141317.30302-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The corresponding IPC4 module of snd_soc_dapm_buffer widget is module
-to-module copier.
The module-to-module copier is a buffer-like component with demuxing
capabilities.
Rename the host_token_list to common_copier_token_list since it will
be used by host copier and module-to-module copier.
The setup callback is almost the same as sof_ipc4_widget_setup_pcm except
the gtw_cfg data, and the free callback is exactly the same as
sof_ipc4_widget_free_comp_pcm. To reduce the duplication, the commit
reuses the setup and free callbacks.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230126110637.25542-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the swidget is NULL we skip the preparing of the widget and jump to
handle the sink path of the widget.
If the prepare fails in this case we would undo the prepare but the swidget
is NULL (we skipped the prepare for the widget).
To avoid NULL pointer dereference in this case we must check swidget
against NULL pointer once again.
Fixes: 0ad84b11f2 ("ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230120102125.30653-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "id" comes from the user. Change the type to unsigned to prevent
an array underflow.
Fixes: f4ea22f7aa ("ASoC: SOF: ipc4: Add support for mtrace log extraction")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/Y8laruWOEwOC/dx9@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:
This patch series adds compress API support to ipc_msg_data /
set_stream_data_offset callbacks.
Changes since v1:
- fixed reviewed-by list (+Peter, -Pierre). Since github had
some glitches I added the reviews received manually in the
commits.
- Github PR link: https://github.com/thesofproject/linux/pull/4133
Daniel Baluta (4):
ASoC: SOF: Prepare ipc_msg_data to be used with compress API
ASoC: SOF: Prepare set_stream_data_offset for compress API
ASoC: SOF: Add support for compress API for stream data/offset
ASoC: SOF: compress: Set compress data offset
sound/soc/sof/amd/acp-ipc.c | 8 ++--
sound/soc/sof/amd/acp.h | 5 ++-
sound/soc/sof/compress.c | 9 +++++
sound/soc/sof/intel/hda-ipc.c | 8 ++--
sound/soc/sof/intel/hda.h | 4 +-
sound/soc/sof/ipc3-pcm.c | 3 +-
sound/soc/sof/ipc3.c | 4 +-
sound/soc/sof/mediatek/mt8186/mt8186.c | 2 +-
sound/soc/sof/mediatek/mt8195/mt8195.c | 2 +-
sound/soc/sof/ops.h | 8 ++--
sound/soc/sof/sof-priv.h | 11 ++++--
sound/soc/sof/stream-ipc.c | 53 +++++++++++++++++++-------
12 files changed, 81 insertions(+), 36 deletions(-)
--
2.25.1
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series contains one fix (first patch) followed by a nice to have safety
belts in case we get a widget from topology which is not handled by SOF and will
not have corresponding swidget associated with.
The existing code return when a widget doesn't need to
prepare/unprepare. This will prevent widgets in the sink path from being
prepared/unprepared.
Cc: <stable@vger.kernel.org> # 6.1
Link: https://github.com/thesofproject/linux/issues/4021
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Skip preparing/unpreparing widgets if the swidget pointer is NULL. This
will be true in the case of virtual widgets in topology that were added
for reusing the legacy HDA machine driver with SOF.
Fixes: 9862dcf702 ("ASoC: SOF: don't unprepare widget used other pipelines")
Cc: <stable@vger.kernel.org> # 6.1
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should unprepare the widget if its use_count = 1.
Fixes: 9862dcf702 ("ASoC: SOF: don't unprepare widget used other pipelines")
Cc: <stable@vger.kernel.org> # 6.1
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230118101255.29139-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If there is a connection between a playback stream and a capture stream,
all widgets that are connected to the playback stream and the capture
stream will be in the list.
So, we have to start with the exactly right widget type.
snd_soc_dapm_aif_out is for capture stream and a playback stream should
start with a snd_soc_dapm_aif_in widget.
Contrarily, snd_soc_dapm_dai_in is for playback stream, and a capture
stream should start with a snd_soc_dapm_dai_out widget.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230117123534.2075-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because now snd_sof_set_stream_data_offset has compress
support we use it to set posn_offset for compress stream.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230117122533.201708-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_pcm_stream keeps information about both PCM (snd_pcm_substream)
and Compress (snd_compr_stream) streams.
When PCM substream pointer is NULL this means we are dealing with a
compress stream.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230117122533.201708-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make second parameter of set_stream_data_offset generic
in order to be used for both PCM and compress streams.
Current patch doesn't introduce any functional change,
just prepare the code for compress support.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230117122533.201708-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make second parameter of ipc_msg_data generic
in order to be able to support compressed streams.
This patch doesn't hold any functional change.
With this case we can use ipc_msg_data, to retrieve information from
DSP for both PCM/Compress API.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230117122533.201708-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the generic iomem callback for debugfs_add_region_item to support
sof-logger.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230110084312.12953-4-tinghan.shen@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support of SOF on MediaTek MT8188 SoC.
MT8188 ADSP integrates with a single core Cadence HiFi-5 DSP.
The IPC communication between AP and DSP is based on shared DRAM and
mailbox interrupt.
The change in the mt8186.h is compatible on both mt8186 and
mt8188. The register controls booting the DSP core with the
default address or the user specified address. Both mt8186
and mt8188 should boot with the user specified boot in the driver.
The usage of the register is the same on both SoC, but the
control bit is different on mt8186 and mt8188, which is bit 1 on mt8186
and bit 0 on mt8188. Configure the redundant bit has noside effect
on both SoCs.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230110084312.12953-3-tinghan.shen@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series will extend the IPC ops optionality to cover it up to the existence
of the top level ipc pointer itself. There is no functionality change.
The reason for the extended optionality is that we have "DSPless"
debug/development support coming up (currently it is in SOF's topic/sof-dev
stable branch) initially supporting Intel's HDA platforms.
As the name suggests, in this mode the DSP is completely ignored by the linux
driver stack (no firmware loaded, only using HDA directly).
The DSPless mode is aimed to help us to verify our Linux stack on new platforms
where the firmware is not yet in the state that we can reliably use it, but the
hardware and programming flows can be tested already.
There is no plan to make DSPless a production target for SOF Linux stack.
While this is preparatory series aimed to unblock the DSPless support, it has
been integrated into sof-dev separately and we have lots of new features
depending on it (went in between this set and the DSPless support).
I still have some minor tasks to complete for the DSPless to make it a bit more
versatile, but I don't want to block other, stable features for upstreaming.
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
Hello,
this patch series removes all platform remove functions that only return
zero below sound/soc. There is no reason to have these, as the only
caller is platform core code doing:
if (drv->remove) {
int ret = drv->remove(dev);
...
}
(in platform_remove()) and so having no remove function is both
equivalent and simpler.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series contails 2 patches to fix device suspend after a firmware
crash and another patch to allow reading the FW state from debugfs.
DSP SRAM is not used for audio shared buffer between host and DSP so
TOTAL_SIZE_SHARED_SRAM_FROM_TAIL is zero. Remove the definition and
redundant comparison to fix coverity "unsigned compared against 0".
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angeloigoacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221215061046.16934-1-yc.hung@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The error "Conflict in bytes vs. priv size." is too brief. With
the printed sizes it's a lot easier to find the size issue in
for binary control if such happens.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221216115350.28260-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_debug value is set by the user, developer intentionally.
To save time on figuring out what value has been passed to the kernel by
the user, developer, print it out if it is not 0.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20221216115435.28427-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221212205406.3771071-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
If the sdev->fw_trace_is_supported is true then we must have the fw_tracing
ops set, no need to check again.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For the sake of safety use the sof_ipc_get_ops() to fetch the fw_tracing
ops to avoid cases when either sdev->ipc or sdev->ipc->ops might be NULL.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code treats the fw_tracing as optional feature but the documentation
was not reflecting this.
Correct it by explicitly stating that the fw_tracing is optional.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[pm/tplg] == NULL (treated optional for pm currently)
sdev->ipc->ops->[pm/tplg]->ops == NULL (treated optional currently)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[tplg] == NULL
sdev->ipc->ops->[tplg]->ops == NULL (treated optional currently)
At the same time standardize the naming of the ops pointer to tplg_ops
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[ops_group] == NULL
sdev->ipc->ops->[pcmops_group]->ops == NULL (treated optional currently)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[tplg] == NULL
sdev->ipc->ops->[tplg]->control == NULL
sdev->ipc->ops->[tplg]->control->ops == NULL (treated optional currently)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC ops are optional, but they require that the ops struct is to be
allocated with all callbacks set to NULL.
Update the code to extend the optionality to:
sdev->ipc == NULL
sdev->ipc->ops == NULL
sdev->ipc->ops->[pcm] == NULL
sdev->ipc->ops->[pcm]->ops == NULL (treated optional currently)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation to a case when the DSP is not used.
In this case the IPC communication itself has no meaning and we might
not even have sdev->ipc allocated at all.
The sof_ipc_get_ops() macro can be used to get a named IPC ops struct or
return NULL if the sdev->ipc is not allocated.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core treats all function pointer in sof_ipc_tplg_ops as optional.
Update the documentation to reflect this.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Other topology ops have been treated as optional, including the route_free.
Handle the route_setup in a conforming way as optional callback.
Note: we do not have checks for the callbacks itself which makes them all
optional in practice.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221221102328.9635-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A few more updates for 6.2 since the last PR: most of changes are
about ASoC device-specific fixes.
- Lots of ASoC Intel AVS extensions and refactoring
- Quirks for ASoC Intel SOF as well as regression fixes
- ASoC Mediatek and Rockchip fixes
- Intel HD-audio HDMI workarounds
- Usual HD- and USB-audio device-specific quirks
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmOlhFcOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE/urxAAg4UNnglVwZ5yGNndo2Im6kf++aZbwsPMjTFS
VIfPLD2UFs+s7SOnHYv+Gaai1fhv39bMyg4IsSJvH/kyi/5iWUf85fW7W+xK701N
rWwkvEpmjpla/ojisryF+Liy0in3hc/YgrNPlxzTL5uExcHTmBA8mw44wjxnWPwB
eS31HowboL9aSeUBMmZma6wME7lVqzOAogIG2q8Pj1VucaE2MLGAtSeJLzy5Bnhm
QTG66EmybxNbwRZuv3+CNv6t8Lo/WcwRJ3iReOePc/ePDqreGYfrKeVGhDLt+P5J
owagDBDLLs+DZ9UuCFg/Td0ncZufTYYkg2KDQgOeSInVj8NeSFBbDbYQp89qwkSq
mxfyoFS9Jx6CWiI/F0P9SOhIYbePLZfYyHZHj7yiGCGX2x+ZaOtKrPkvzmxw38cb
nbmBbHmcwRpYirNeOtVPiBKOaIt6i9rzmfGiy9LeMScYd6Jjuq2xWOG+z9zWHxun
EQHu3vqW/6DJRgfw4k/KcrrGzT3m71UxMd1jSL+Veb6Fv9wTrCeG95YNA3k6B2nO
Xr1nNFCPzKqfYizRLGGjTy4SSNzDQXjt1O0vbbtrfAJ4iK+as5tNqObUMO6ItUoY
6JMQyyKHLgyE+1KdrE0ltZYoP6LZ60rTFDTQBMXMb+S5CXz5k9JbmlL7790tL+VL
/3cSm64=
=2Uko
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"A few more updates for 6.2: most of changes are about ASoC
device-specific fixes.
- Lots of ASoC Intel AVS extensions and refactoring
- Quirks for ASoC Intel SOF as well as regression fixes
- ASoC Mediatek and Rockchip fixes
- Intel HD-audio HDMI workarounds
- Usual HD- and USB-audio device-specific quirks"
* tag 'sound-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
ASoC: lochnagar: Fix unused lochnagar_of_match warning
ASoC: Intel: Add HP Stream 8 to bytcr_rt5640.c
ASoC: SOF: mediatek: initialize panic_info to zero
ASoC: rt5670: Remove unbalanced pm_runtime_put()
ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
ASoC: Intel: soc-acpi: update codec addr on 0C11/0C4F product
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: wm8994: Fix potential deadlock
ASoC: mediatek: mt8195: add sof be ops to check audio active
ASoC: SOF: Revert: "core: unregister clients and machine drivers in .shutdown"
ASoC: SOF: Intel: pci-tgl: unblock S5 entry if DMA stop has failed"
ALSA: hda/hdmi: fix stream-id config keep-alive for rt suspend
ALSA: hda/hdmi: set default audio parameters for KAE silent-stream
ALSA: hda/hdmi: fix i915 silent stream programming flow
ALSA: hda: Error out if invalid stream is being setup
ASoC: dt-bindings: fsl-sai: Reinstate i.MX93 SAI compatible string
ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated
ASoC: codecs: wcd-clsh: Remove the unused function
...
Allow system health detection mechanisms to check the FW state, this
will allow them to check if the FW is in its "crashed" state going
forward to help automatically diagnose driver state.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221220125629.8469-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the DSP is suspended while the firmware is in the crashed state, we
skip tearing down the pipelines. This means that the widget reference
counts will not get to reset to 0 before suspend. This will lead to
errors with resuming audio after system resume. To fix this, invoke the
tear_down_all_pipelines op before skipping to DSP suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221220125629.8469-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the DSP crashes before the system suspends, the setting of target state
will be skipped because the firmware state will no longer be
SOF_FW_BOOT_COMPLETE. This leads to the incorrect assumption that the
DSP should suspend to D0I3 instead of suspending to D3. To fix this,
set the target_state before we skip to DSP suspend even when the DSP has
crashed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221220125629.8469-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- intel: reorganization of hw_ops callbacks, splitting files etc
- qcom: support for v1.7.0 qcom controllers
-----BEGIN PGP SIGNATURE-----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=3uDi
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"This include bunch of Intel driver code reorganization and support for
qcom v1.7.0 controller:
- intel: reorganization of hw_ops callbacks, splitting files etc
- qcom: support for v1.7.0 qcom controllers"
* tag 'soundwire-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel: split auxdevice to different file
soundwire: intel: add in-band wake callbacks in hw_ops
soundwire: intel: add link power management callbacks in hw_ops
soundwire: intel: add bus management callbacks in hw_ops
soundwire: intel: add register_dai callback in hw_ops
soundwire: intel: add debugfs callbacks in hw_ops
soundwire: intel: start using hw_ops
dt-bindings: soundwire: Convert text bindings to DT Schema
soundwire: cadence: use dai_runtime_array instead of dma_data
soundwire: cadence: rename sdw_cdns_dai_dma_data as sdw_cdns_dai_runtime
soundwire: qcom: add support for v1.7 Soundwire Controller
dt-bindings: soundwire: qcom: add v1.7.0 support
soundwire: qcom: make reset optional for v1.6 controller
soundwire: qcom: remove unused SWRM_SPECIAL_CMD_ID
soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15
Coverity spotted that panic_info is not initialized to zero in
mtk_adsp_dump. Using uninitialized value panic_info.linenum when
calling snd_sof_get_status. Fix this coverity by initializing
panic_info struct as zero.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20221213115617.25086-1-yc.hung@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If system shutdown has not been completed cleanly, it is possible the
DMA stream shutdown has not been done, or was not clean.
If this is the case, Intel TGL/ADL HDA platforms may fail to shutdown
cleanly due to pending HDA DMA transactions. To avoid this, detect this
scenario in the shutdown callback, and perform an additional controller
reset. This has been tested to unblock S5 entry if this condition is
hit.
Co-developed-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221209114529.3909192-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Skyrim project and Whiterun met error when DSP
loading during device boot.
Ex, error in kernel log,
ERR kernel: [ 16.124537] snd_sof_amd_rembrandt
0000:04:00.5: PSP validation failed.
Use the snd_sof_dsp_read_poll_timeout function to successfully
read the FW_QUALIFIER register
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221205120649.1950576-2-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we do not shutdown the peripheral properly at shutdown, the whole system
crashes after kexec() on the first io access.
Let's implement the appropriate callback.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221127-mtk-snd-v1-0-b7886faa612b@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221127193549.211bf8f7@endymion.delvare
Signed-off-by: Mark Brown <broonie@kernel.org>
By default clock source is selected as internal clock of 96Mhz
which is not configurable. Now we select the clock source to
external clock (ACLK) which can be configurable to different clock
ranges depending on usecase.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221123121911.3446224-3-vsujithkumar.reddy@amd.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By default the position updates are read from dsp box when streambox
size is not defined.if the streambox size is defined to some value
then position updates can be read from the streambox.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221123121911.3446224-2-vsujithkumar.reddy@amd.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no reason to delay the multi-link parsing, this can be done
earlier before checking the SoundWire capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The number of links is stored in different registers depending on the
IP version, add sdw_check_lcount() callback. This callback only checks
that the number of links supported in hardware is compatible with the
number of links exposed in ACPI _DSD properties.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no real rationale for enabling the SoundWire interrupt in the
init, this can be done from the enable_sdw_irq() callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The offsets and sequences are identical for interrupt enabling and
disabling, we can refactor the code with a single routine and a
boolean.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Different generations of Intel hardware rely on different programming
sequences to enable SoundWire IP. In existing hardware, the SoundWire
interrupt is enabled with a register field in the DSP register
space. With HDaudio multi-link extensions registers, the SoundWire
interrupt will be enabled with a generic interrupt enable field in
LCTL, without any dependency on the DSP being enabled.
Add a per-chip callback following the example of the check_sdw_irq()
model already upstream.
Note that the callback is not populated yet for MeteorLake (MTL) since
the interrupts are already enabled in the init. A follow-up patch will
move the functionality to this callback after a couple of cleanups.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111042653.45520-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before introducing new hardware with completely different register
spaces and programming sequences, we need to abstract some of the
existing routines in hw_ops that will be platform-specific. For now we
only use the 'cnl' ops - after the first Intel platform with SoundWire
capabilities.
Rather than one big intrusive patch, hw_ops are introduced in this
patch so show the dependencies between drivers. Follow-up patches will
introduce callbacks for debugfs, power and bus management.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111013135.38289-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We may check ops before spending resources on memory allocation.
While at it, utilize dev_get_platdata() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221117103223.74425-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
with SOF topology2 for IPC4, widgets might have mutliple queues they can be
connected.
The queues to use between components are descibed in the topology file.
This series adds widget queue support (specify which pin to connect) for
ipc4-topology with topology2.
Note: currently queue 0 of a widget is used as hardwired default.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently we set pipeline instance id = swidget->pipeline_id, but
pipeline_id is from topology and can be any number. In fact, the
number of pipelines is limited. This patch use ida to allocate pipeline
instance id and will be used for pipeline instance id in the IPC
message.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
MeteorLake relies on a different register for D0i3 configuration, add
a platform-specific callback to abstract the differences.
Currently we set pipeline instance id = swidget->pipeline_id, but
pipeline_id is from topology and can be any number. In fact, the
number of pipelines is limited. This patch use ida to allocate pipeline
instance id and will be used for pipeline instance id in the IPC
message.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221108002910.2819709-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Get max pipeline number from firmware configuration.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221108002910.2819709-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_ipc4_widget_free_comp is dedicated to pipeline. Rename it
to sof_ipc4_widget_free_comp_pipeline.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221108002910.2819709-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the d0i3 with d0i3_offset for different platforms
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221107164154.21925-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MTL has different d0i3 offset compared to cavs platforms.
Use d0i3_offset to unify the setting.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221107164154.21925-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MTL has a different offset of d0i3 compared to cavs platforms.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221107164154.21925-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The data received via iccmax stream is not used anywhere, so no need to
allocate a big DMA buffer for it. This is especially important as the
allocation is done even in cases where reload of the firmware is skipped
and execution happens directly from the firmware stored in IMR.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107072621.28904-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During system suspend there is a chance that the running stream undergo
an xrun and instead of the expected SNDRV_PCM_TRIGGER_SUSPEND trigger
we will receive SNDRV_PCM_TRIGGER_STOP.
The handling of SUSPEND and STOP triggers differ that case of the later
the sof_pcm_stream_free() will be called with free_widget_list = false.
But we must make sure that all active widgets and streams are free before
entering suspend in order to be able to resume without error.
We can utilize the tear_down_all_pipelines to put the system to an expected
state and to fix the suspend/resume error.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221107084158.26629-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add get/put queue id helper to manage queue id in route
setup and route free.
The queue allocation rules are:
- If widget only has one sink/source pin, zero will be
returned as the queue ID directly.
- If widget has more than one sink/source pins, and pin
binding array is defined in topology, queue ID will be
allocated according to the pin binding array.
- If widget has more than one sink/sink pins, and pin
binding array is not defined, Linux ID allocation will be
used to allocate queue ID dynamically.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107085706.2550-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing sink/source pin binding array
per widget from topology. The pin binding arrays will
be used to determine the source and sink queue IDs during
widget binding for widget that requires special pin binding.
An example of widget that requires special pin binding is
the smart amplifier widget, its feedback sink pin has to be
connected to a capture DAI copier for codec feedback, while
the other sink pin has to be connected to a host DAI copier.
Pin ID is required during widget binding for correct route setup.
Conversely, the pin ID for 'generic' pins is not defined in the
topology and will be allocated by the kernel dynamically. When
only one pin is supported, the pin ID shall always be zero. When
more than one pin is supported, the pin ID is determined with the
ID allocation mechanism in the kernel.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107085706.2550-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for parsing the number of sink/source pins
per widget from topology. They will be used to determine
the sink/source queue IDs during widget binding.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221107085706.2550-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the return value check before attempting to assign the core ID to the
swidget since we are going to fail the sof_widget_ready() and free up
swidget anyways.
Fixes: 909dadf21a ("ASoC: SOF: topology: Make DAI widget parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221107090433.5146-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If snd_hdac_device_register() fails, 'codec' and name allocated in
dev_set_name() called in snd_hdac_device_init() are leaked. Fix this
by calling put_device(), so they can be freed in snd_hda_codec_dev_release()
and kobject_cleanup().
Fixes: 829c673198 ("ASoC: SOF: Intel: Introduce HDA codec init and exit routines")
Fixes: dfe66a1878 ("ALSA: hdac_ext: add extended HDA bus")
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221021123849.456857-2-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Originally in commit b2ebcf42a4 ("ASoC: SOF: free widgets in
sof_tear_down_pipelines() for static pipelines"), freeing of pipeline
components at suspend was only done with recent FW as there were known
limitations in older firmware versions.
Tests show that if static pipelines are used, i.e. all pipelines are
setup whenever firmware is powered up, the reverse action of freeing all
components at power down, leads to firmware failures with also SOF2.0
and SOF2.1 based firmware.
The problems can be specific to certain topologies with e.g. components
not prepared to be freed at suspend (as this did not happen with older
SOF kernels).
To avoid hitting these problems when kernel is upgraded and used with an
older firmware, bump the firmware requirement to SOF2.2 or newer. If an
older firmware is used, and pipeline is a static one, do not free the
components at suspend. This ensures the suspend flow remains backwards
compatible with older firmware versions. This limitation does not apply
if the product configuration is updated to dynamic pipelines.
The limitation is not linked to firmware ABI, as the interface to free
pipeline components has been available already before ABI3.19. The
problem is in the implementation, so firmware version should be used to
decide whether it is safe to use the newer flow or not. This patch adds
a new SOF_FW_VER() macro to compare SOF firmware release versions.
Link: https://github.com/thesofproject/sof/issues/6475
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221101114913.1292671-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement IPC operations for IPC4 messaging and add doxygen
documentation for the functions.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sof_client_ipc4_find_module() for calling
sof_ipc4_find_module_by_uuid() in sof client code.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to duplicate set_get_data msg handling in clients.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare an IPC ops struct for probes client device and move IPC3
functions behind it.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace probes related [0] arrays, all found within unions, with
DECLARE_FLEX_ARRAY() declarations.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing NOCODEC mode enforces a build-time mutual exclusion with
the HDaudio link support, mostly to avoid any dependency on the
snd_hdac library and references to HDAudio codec/i915 stuff.
This is very useful to track dependencies and test a minimal
configuration, but very painful for developers and CI: a recompilation
and reinstall of the kernel modules is required.
This patch suggests an alternate middle ground where the selection of
the machine driver and all codec-related actions are bypassed at
run-time, contingent on a kernel module parameter being set.
For example setting BIT(10) with
'options snd_sof sof_debug=0x401'
is enough to switch from an HDaudio card to a nocodec one.
This new DEBUG_NOCODEC mode is not suitable for distributions and
end-users. It's not even recommended on all platforms, i.e. the
NOCODEC mode is known not to work on specific devices where the BIOS
did not configure support for I2S/DMIC interfaces. The usual
development devices such as Chromebooks, Up boards and Intel RVP are
the only recommended platforms where this mode can be supported.
Note that the dynamic switch between HDaudio and nocodec may not
always possible depending on hardware layout, pin-mux options, and
BIOS settings. The audio subsustems on Intel platforms has to support
4 types of interfaces and pin-mux can be complicated.
Reviewers might ask: why didn't we do this earlier? The main reason is
that all the codec-related configurations were not cleanly separated
out in the sof/intel directory. With all the cleanups done recently,
adding this opt-in behavior is relatively straightforward.
Tested on UpExtreme (WHL) and UpExtreme i11 (TGL).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All the HDAudio codec handling is completely specific to Linux and
completely dependency on GPL2.0 code, specifically the snd_hdac_
library.
There was no intention to have a dual-license for this code, this was
an oversight that needs to be corrected. Update the SPDX and
EXPORT_SYMBOL information, no functionality change otherwise.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since we've moved to the same flows for HDaudio and iDISP codecs, we
need to be more consistent about dependencies.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just move the code in hda-mlink.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dependencies are on SND_SOC_SOF_HDA_AUDIO_CODEC and the bus_exit
sequence should be well identified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, code move to have better split between
HDaudio codec management and core parts.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
IS_ENABLED is not always in the right places, the codec parts depend
on SND_SOC_SOF_HDAUDIO_CODEC
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change to use helper and avoid conditional compilation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no real reason to filter out this allocation at build
time. Let's allocate it always, so that we can have a more dynamic way
of disabling HDaudio codec support without having to recompile.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One more helper to split controller and codec
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new helper in hda-codec.c for a clean split between controller and
codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to split basic stream functionality from RIRB/CORB, which are
completely codec-related.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new helper to deal with LOSVID.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The multi-link handling needs to be handled with dedicated helpers
before cleanups and extensions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec_mask and codec-related handling should depend on
SOF_HDA_AUDIO_CODEC, not SOF_HDA.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we have removed the dependency on SND_SOC_HDAC_HDMI, we can
simplify the code and make the code conditional on a single #ifdef.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
remove all dependencies on SND_SOC_HDAC_HDMI and
clean-up ifdefs. The machine driver still supports this configuration
used by the Skylake driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've been using the same option for quite some time now, it's time to
remove the kernel parameter to disable the common HDaudio codec
handling.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This is the part1 of my HDaudio cleanups, before the addition of
to-be-announced HDaudio extensions.
The patchset includes more consistent use of read/write/update
helpers, removal of useless waits, structure members and programming
sequences, removal of confusing sharing of private_data between FE and
BE.
Additional patches are coming to split the controller, codec and
multi-link management functionality in well-identified files.
Pierre-Louis Bossart (16):
ASoC: SOF: ops: fallback to mmio in helpers
ASoC: SOF: Intel: use mmio fallback for all platforms
ASoC: SOF: ops: add readb/writeb helpers
ASoC: SOF: ops: add snd_sof_dsp_updateb() helper
ASoC: SOF: Intel: hda-dsp: use SOF helpers for consistency
ASoC: SOF: Intel: hda-dai: start removing the use of
runtime->private_data in BE
ASoC: SOF: Intel: hda-dai: use component_get_drvdata to find hdac_bus
ASoC: SOF: Intel: hda-dai: remove useless members in hda_pipe_params
ASoC: SOF: Intel: hda-ctrl: remove useless sleep
ASoC: SOF: Intel: hda: always do a full reset
ASoC: SOF: Intel: hda: remove useless check on GCTL
ASoC: SOF: Intel: hda-stream: use SOF helpers for consistency
ASoC: SOF: Intel: hda-stream: rename CL_SD_CTL registers as SD_CTL
ASoC: SOF: Intel: hda: use SOF helper for consistency
ASoC: SOF: Intel: hda-stream: use snd_sof_dsp_updateb() helper
ASoC: SOF: Intel: hda-stream: use readb/writeb for stream registers
sound/soc/sof/intel/bdw.c | 6 +---
sound/soc/sof/intel/byt.c | 12 ++-----
sound/soc/sof/intel/hda-common-ops.c | 6 +---
sound/soc/sof/intel/hda-ctrl.c | 41 ++++++++--------------
sound/soc/sof/intel/hda-dai.c | 31 +++++++----------
sound/soc/sof/intel/hda-dsp.c | 12 ++++---
sound/soc/sof/intel/hda-loader-skl.c | 30 ++++++++--------
sound/soc/sof/intel/hda-loader.c | 4 +--
sound/soc/sof/intel/hda-stream.c | 47 ++++++++++++-------------
sound/soc/sof/intel/hda.c | 5 ++-
sound/soc/sof/intel/hda.h | 25 +++++++-------
sound/soc/sof/intel/pci-tng.c | 6 +---
sound/soc/sof/ops.h | 51 ++++++++++++++++++++--------
sound/soc/sof/sof-priv.h | 4 +++
14 files changed, 136 insertions(+), 144 deletions(-)
--
2.34.1
sof_ipc4_fw_parse_ext_man() can return negative error numbers which is not
correct for the used size_t type.
Change the return value to ssize_t and use the same type where the function
is called.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 73c091a2fe ("ASoC: SOF: ipc4-loader: Support for loading external libraries")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221025132706.30356-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
readb/writeb are used directly without any wrappers or references to
the BAR, as usually done for other registers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just more consistency in the code.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the CL prefix is misleading. HDaudio streams are used for
code loading since ApolloLake, but they are also used for regular
audio transfers.
No functionality change, pure rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not sure why we mixed sof and hdac helpers, this makes the code way
less readable.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we always do a full reset, there's no point in checking if
the controller is always out-of-reset. This is always true by
construction.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no point in checking for a full-reset condition that is
always-true in the callers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The hda_dsp_ctrl_link_reset() already performs a usleep and a check that
GCTL has been modified, there's no point in waiting more.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some settings were never or are no longer used, remove useless
definitions and assignments.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the last usage of substream->runtime->private_data in the
HDAudio BE hw_params.
The SOF core saves the 'sdev' global context as component drvdata, and
we already save the bus information in sdev.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF HDAudio code stores the Host DMA hdac_stream structure in the
FE substream->runtime->private_data. The BE dailink also uses the
substream->runtime->private_data to allocate the link DMA stream tag.
This really works by accident: the DPCM core copies the FE runtime
information in the BE, which has the side-effect of sharing the
FE-specific private_data with the BE.
To avoid more uses of the private_data with potential issues such as
accessing stale information or use-after-free cases, this patch
removes most of the usages of this private_data at the BE level. We
can directly use the existing dma_data to access the relevant
information.
However the hw_params still uses the information, mainly to go back to
the 'bus' structure required for the link dma stream tag
allocation. This is safe in that the 'bus' is not stream or PCM
specific.
The next patch will completely remove this last use of private_data by
using the component_drvdata - which is how SOF passes a global context
around.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing helper in SOF toolbox.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These will be used to add more consistency in the SOF core and
drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to expose an indirection when we can use the fallback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Returning an error when a read/write is not implemented makes no
sense, especially on read where no return value makes sense.
Change the logic to directly fallback to mmio. If a platform truly
wants other read/writes that are not plain vanilla mmio, it needs to
implement its own routines.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221024165310.246183-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
In IPC4 all DSP loadable executable is a 'library' containing modules. The main
or basefw is also a library which contains multiple modules.
IPC4 allows to use loadable libraries to extend the functionality of the booted
basefw.
This series adds support for loading external libraries in case they are needed
by the loaded topology file.
The libraries must be placed to a specific firmware directory (fw_lib_prefix),
which is:
intel/avs-lib|sof-ipc4-lib/ followed by the platform name and in case of
community key use a 'community' directory.
For example for upx-i11 (community key): intel/avs-lib/tgl/community is the
default path.
The name of the library should be the UUID of the module it contains since the
library loading is going to look for the file as <module_UUID>.bin
In case there is a need to bundle multiple modules into single library, symlinks
can be used to point to the file:
module_boundle.bin
<UUID1>.bin -> module_boundle.bin
<UUID2>.bin -> module_boundle.bin
<UUID3>.bin -> module_boundle.bin
But note that in this case all modules will be loaded to the DSP since only the
whole library can be loaded, not individual modules.
In case the requested module is not available among the loaded libraries,
try to load it as external library.
The kernel will try to load the file from <fw_lib_prefix>/<module_uuid>.bin
If the file found, then the ext manifest of it is parsed, placed it under
XArray and the pointer to the module is returned to the caller.
Releasing the firmware will be done on ipc cleanup time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-20-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The query_fw_configuration callback is redundant and the only user of it
was converted to use the generic post_fw_boot ops.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Execute the configuration query from the generic post_fw_boot callback and
do not set the query_fw_configuration ops to allow it's removal.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for executing IPC dependent tasks after a successful firmware
boot.
The new post_fw_boot ops can make the fw_loader query_fw_configuration
callback redundant as IPC code can handle the first boot internally.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Intel HDA platforms the library loading is done via DMA and an IPC
message is also need to be sent to initiate the downloading of the new
library.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dynamic loading of external libraries should not be done if the firmware
was booted from IMR since in that case the libraries will be restored along
with the basefw.
The booted_from_imr flag is introduced and set to true if the IMR boot was
successful and to false if cold booting is executed.
The reason for the new flag is that guessing from existing flags, used to
decide if we should try booting from IMR or not is not going to be robust
as the IMR boot itself can fail and in that case a full, cold boot is
executed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Platforms where external libraries can be supported should set the
load_library callback to implement this functionality.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The default path for the external firmware libraries are:
intel/avs-lib/<platform>
or
intel/sof-ipc4-lib/<platform>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
IPC4 based firmware supports dynamically loaded external libraries.
The libraries will be not stored alongside of the firmware or tplg files.
For intel platforms the default path will be:
intel/avs-lib|sof-ipc4-lib/<platform>/ if a community key is used on the
given machine then the libraries will be under 'community' directory, like
it is done for the firmware itself.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a simple helper to walk the loaded libraries and their modules to make
the ipc4-topology not aware of the underlying infrastructure and simplify
the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With IPC4 each DSP loadable binary is a library, which contains
ext_manifest section and loadable modules.
The basefw is no exception, it is always library 0 and it can contain
several modules, depending on the firmware build.
The current code assumes only one binary, which is the basefw and has no
concept of libraries.
This patch introduces the library+modules abstraction and represents the
basefw as library for the IPC4 loader codebase.
The basefw loading and handling is not changing, it is still done by the
generic code, but it's information is cloned under the library
representation.
The libraries are managed via XArray to offload the list and ID management.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware supports external libraries (containing modules) to be loaded
runtime.
The firmware configuration contains the maximum number of libraries
supported, including the base firmware (which is library 0).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for IPC specific initialization (init) and cleanup (exit)
callback.
These callbacks can be used by IPC implementation to do basic
initialization and cleanup.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF stack now uses the sdev->basefw to work with the SOF firmware, the
information from plat_data can be dropped.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to access to the firmware struct via sdev->basefw container to
unblock the removal of the firmware information from plat_data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to access to the firmware struct via sdev->basefw container to
unblock the removal of the firmware information from plat_data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to access to the firmware struct via sdev->basefw container to
unblock the removal of the firmware information from plat_data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the firmware related information under a new struct (sof_firmware)
and add it to the high level snd_sof_dev struct.
Convert the generic code to use this new container when working with the
basefw and for compatibility reasons set the old plat_data members used by
the platforms.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the FW state to complete right after boot is complete. This enables
sending IPC's in the post_fw_run op. This will be needed to support
reloading 3rd party module libraries after firmware boot.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If snd_hdac_device_register() fails, 'codec' and name allocated in
dev_set_name() called in snd_hdac_device_init() are leaked. Fix this
by calling put_device(), so they can be freed in snd_hda_codec_dev_release()
and kobject_cleanup().
Fixes: 829c673198 ("ASoC: SOF: Intel: Introduce HDA codec init and exit routines")
Fixes: dfe66a1878 ("ALSA: hdac_ext: add extended HDA bus")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020110157.1450191-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPIB and DRMS capabilities are orthogonal to the DSP enablement
and can be used whether the stream is coupled or not.
The existing code partitioning makes limited sense, the capabilities
are parsed at the sound/hda level but helpers are located in
sound/hda/ext.
This patch moves all the SPIB/DRMS functionality to the sound/hda
layer. This reduces the complexity of the sound/hda/ext layer which is
now limited to handling the multi-link extensions and stream
coupling/decoupling helpers.
Note that this is an iso-functionality code move and rename, the
HDaudio legacy driver would need additional changes to make use of
these capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All the helpers dealing with multi-link configurations are located in
the hdac_ext_controller.c, except the two set/clear routines that
modify the LOSIDV registers.
For consistency, move the two helpers and add the 'bus' prefix. One
could argue that the 'ml' prefix might be more relevant but that would
be a larger code change.
No functionality change, just move and rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We should only use 'link' in the context of multi-link
configurations. Streams are configured from a different register space
and are not dependent on link except for LOSIDV settings.
Not functionality change, just pure rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No functionality change, just prefix addition to clearly identify that
the helper only applies to the 'ext' part for Intel platforms.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have two helpers with confusing names and different purposes.
Rename bus_get_link() and bus_get_link_at() as bus_get_hlink_by_name()
and bus_get_hlink_by_addr() respectively.
No functionality change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the convention and use hlink for consistency.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ADL-N uses a different signing key, which means we can't reuse the
regular ADL descriptor used for ADL-P/M/S.
Fixes: cd57eb3c40 ("ASoC: SOF: Intel: pci-tgl: add ADL-N support")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221019154926.163539-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Siarhei Volkau <lis8215@gmail.com>:
The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
The IPC4 use of doorbell registers leaves some corner cases not well defined
and the 'correct sequences' are subjective in a sense.
The DSP doorbell registers are used as separate and independent channels and
the sequences for host -> DSP -> host (reply) can be racy.
For example:
The ACKing of a received message can happen before the firmware sends the reply
or it can as well happen after the reply has been sent and received by the host.
Both can be considered 'correct sequences' but they need different handling.
This series will allow the kernel to service any interpretation of the
sequencing on the firmware side.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
All Intel drivers for cAVS platforms contain a sequence for S3 resume
which doesn't seem justified nor necessary. Forensic Git investigation
in internal repositories did not provide any rationale for the
implementation, and tests show no impact when those sequences are
removed.
This sequence was identified as problematic during a large HDaudio
cleanup where all programming sequences were revisited before
extensions are added.
Add protection against multiple open of the mtrace/coreN debugfs
nodes. This is not supported in the implementation, and this will
show up as unexpected behaviour of the interface, and potential
use of already freed memory.
Fixes: f4ea22f7aa ("ASoC: SOF: ipc4: Add support for mtrace log extraction")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221018121332.20802-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes more sense to log the message before it is sent to the DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221018133843.16958-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By acking a received message we tell the DSP that we have processed the
message (reply or notification) and we are open to receive a new one.
The original implementation did this in a common code after the received
message got handled as reply or notification.
With right timing this opens up a small window when we have processed the
reply and let the other thread proceed to send a new message to the DSP,
which is allowed as the DSP is free to receive message.
But when the message is received and processed by the DSP and it wants to
send a reply it will still see that the previous message has not been
acked, so it fails to send a reply. Later the first reply got acked by the
kernel, but it is too late and the in-flight message got a timeout due to
firmware not responding (which it tried, but could not).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before attempting to send a message to the DSP we need to check if the
downstream BUSY flag has been cleared by the firmware to avoid lost IPC
messages by the firmware.
This is required by a firmware which only acks the received message after
it has sent a reply to the host.
With a bad luck, the host would send a message before the firmware gets to
the clearing the flag and thus losing a message.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read both registers as the first step in the interrupt handler to make
sure that we are handling the event which triggered the interrupt.
The delayed reading of the target request register might reflect incorrect
information about the reason why the interrupt was risen.
Note also that the IPC3 interrupt handler is implemented in this way also.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes more sense to log the message before it is sent to the DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The flow contains surprising parts that seem to have been inspired by
the Skylake driver.
During a resume from S3, the state of the links prior to suspend
should not matter. One would have to assume that the links are powered
down anyways prior to suspend, and there is also no specific code that
turns links on unconditionally on resume.
Likewise, the snd_hdac_init_chip() routine will start the cmd_io
handling, and it's not clear why we should care about the state of the
DMA prior to suspend.
This patch removes these two sequences to simplify the flow.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initial IPC4 tests used the same conventions as previous reference
closed-source firmware, but for MeteorLake the convention is the same
as previous SOF releases (sof-<platform>.ri). Only the prefix changes
to avoid confusions between IPC types.
This change has no impact on users since the firmware has not yet been
released.
Fixes: 064520e8ae ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221017204004.207446-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmM6tu0ACgkQJNaLcl1U
h9BHFQf9Ew/yLSHRdeJwNUEb4VjnRtXz+DLQbGeZBNnk/7Yt/STd0EaudUl0OuiJ
+Ok4bLN6/47bwp5OB0kRGdTVycUq+rR2niJu4dgcY0MkfJi7Pyumibp/biips5rw
+Qzj8oOUPu1970zmOktuy84ZY9Ikl02UEQYyUFVL1AJM3aUzfa/gQ24UCEyA2WxD
ai7TcnUf2+zkMzqvfwFeW3avLSh+9ZLRgHHB52VNQXLHO5+YDvmMmyKZydon67n1
+3QZOS57rQRXUgBOraq+AojTXs9gTFXmF8ujD1eA2qL33vqeZaf7upx76a3U/Rm+
9m+6JucR1qrJyErag2nX90HQOvUcxA==
=kv8c
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.1
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
Add pcm_pointer callback for mt8195 to support read
host position from DSP
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220924033559.26599-3-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pcm_hw_params callback for mt8195 to support continue
update dma host position
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220924033559.26599-2-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
On Intel platforms the registers for DSP communications are used differently,
the IPC dump information is not correct since important registers are not
printed and existing ones are used a bit differently for IPC4.
As a last step, enable the IPC timeout 'handling' and allow the printout of
the now usefull IPC dump.
It can help debugging IPC timeout issues (like we do with IPC3) if we
dump the IPC and DSP information.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware register dump is IPC3 specific, it is not available for other
IPC versions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
The existing code was printing registers relevant for IPC3, which is not
even supported on MTL.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return val of snd_sof_dsp_read() right before polling the same
register is not used, so remove the redundant call.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the disabling of interrupts and powering down the DSP has been
abstracted, re-use the common ops for PM for MTL as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the IP-specific ops for disabling interrupts and powering down the
DSP in hda_suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable the IPC and SDW interrupts in the disable_interrupts op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable the IPC and SDW nterrupts in the disable_interrupts op for
cavs platforms.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequence for disabling DSP interrupts varies between different IP
versions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use power_down_dsp op to differentiate power down sequences in platforms.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For MTL platform, dsp cores need to go power down first then dsp subsystem
also need to set power down.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_power_down_dsp is set for power_down_dsp op for all HDA platforms.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP core power down sequences are different between cavs platforms and MTL.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IDs for RPL-M and RPL-PX
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922100254.27159-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just sort ADL PCI IDs by increasing order.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922100254.27159-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
add pcm_pointer callback for mt8186 to support read
host position from DSP
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220921120239.31934-1-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocated ida needs to be freed up if the IPC message fails since
next time when we try again to set up the widget we are going to try to
allocate another ID and given enough tries, we are going to run out of
unique IDs.
Fixes: 711d0427c7 ("ASoC: SOF: ipc4-topology: move ida allocate/free to widget_setup/free")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220921112751.9253-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset was submitted earlier in April 2022 as part of the
"ASoC: SOF: add INTEL_IPC4 plumbing" series. As requested the SKL/KBL
support is moved to a different series.
This update adds minor style fixes and the ops that were missing at
the time. SKL and KBL daily tests have been running for several months
and helped identify missing sequences in the SOF driver for HDaudio
links, or platform differences that the driver did not account for
(number of pipelines, etc).
Note that this capability is not recommended for any distribution, it
is ONLY for SOF IPC4 CI tests on HDaudio devices, we will not extend
this SKL/KBL support for I2S devices based on ES8336 or Chromebooks
which are ONLY supported by the AVS driver.
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
This series consists of
1.Make ACP core code generic for newer SOC transition
2.Add support for Rembrandt plaform
3.Adding amd HS functionality to the sof core
4.increase SRAM inbox and outbox size to 1024
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
2 patches from Rander required to enable mixing usages with multiple
pipelines.
Increase inbox and outbox mailbox size from 512 to 1024 to
support thirdparty DTS integration ipc tx/rx messages communication.
This is done through firmware window get info.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-5-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add I2S HS control instance to the sof core.
This will help the amd topology to use the I2S HS Dai.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-4-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pci driver and platform driver to enable SOF support on ACP6x
architecture based Rembrandt platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-3-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Newer AMD SOC differs slightly in terms of few registers offset and
configuration. Add offsets into chip_info struct to make core ACP
code more generic and resusable on newer SOC.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-2-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sof/ipc4-topology.c:1533:12: style: Variable 'pipeline' is
assigned a value that is never used. [unreadVariable]
pipeline = pipe_widget->private;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220920145405.2089147-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If multiple pipeline are mixed into one, we can't unprepare
the widget used by other pipelines. This patch checks use_count
to address this case.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920150107.2090695-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Playback can't work after the first try sometimes. The reason is that
some widgets don't have ipc_unprepare ops and driver will jump
to sink_prepare so miss to set prepare state to false. Next
time these widgets will not be prepared and it will result to
error with different format of audio file since the last setting
is not applicable.
This patch makes sure that widget prepare state will be cleared
to false when it is unprepared.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920150107.2090695-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ops and ops_init for SKL and KBL.
Tested on Dell XPS-13-9350 and KBL NUC.
Note: currently only SOF_IPC4_MTRACE_INTEL_CAVS_2 type is supported by
the ipc4-mtrace driver, which is used by CAVS 2.x platforms (ICL, TGL,
ADL) and ACE (MTL).
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation of the IPCv4 IPC support, this patch adds
support for SkyLake and KabyLake boot and descriptors
used when probing the PCI driver.
The work was initially contributed in 2018 by Liam Girdwood and Zhu
Yingjiang, and abandoned due to firmware signature issues. With the
upcoming support of IPC v4, and hence the Intel closed-source
firmware, it's time to re-add this capability.
The SKL ops will be added in the next patch.
Tested with the IPC4 and closed-source firmware on Dell XPS 9350
and KBL NUC with HDaudio codecs. The SSP and DMIC interfaces are not
supported at this time.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the SkyLake and KabyLake code loader on
top of the SOF IPC4.
The work was initially contributed in 2018 by Liam Girdwood and Zhu
Yingjiang, and abandoned due to firmware signature issues. With the
existing support of IPC v4, it's time to re-add this capability.
This patch uses the newly added FSR (Firmware State Register)
definitions for DSP state handling and targeting, ass well as new
state definition for SKL which indicates that the firmware has been
started (similar to FW_ENTERED on other platforms).
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation of the IPCv4 IPC support, this patch adds exposes
two functions required by the SKL/KBL boot and code loader.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset solves a known issue with ES8336 platforms wrt MCLK
selection. Most of the devices use the MCLK0 signal, but some devices
do use the MCLK1 signal.
The MCLK is defined in the topology, it would be a nightmare to
generate more topology files just for one MCLK difference. With a
minor extension to the intel-nhlt library, the MCLK information can be
found by parsing the NHLT table, and we can override the mclk_id at
boot time.
The only known issues for this platform remain the detection of GPIO
and microphone connections, currently only possible with manual
quirks.
Thanks to Eugene J. Markow for testing this patchset.
The NHLT is already used to determine which SSP is connected to an
audio codec, we can parse the SSP blob to get the mclk_id from NHLT.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rtd has both dai_link pointer (A) and num_cpus/codecs (B).
(A) rtd->dai_link = dai_link;
(B) rtd->num_cpus = dai_link->num_cpus;
(B) rtd->num_codecs = dai_link->num_codecs;
But, we can get num_cpus/codecs (B) via dai_link (A).
This means we don't need to keep num_cpus/codecs on rtd.
This patch removes these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfkmv9n3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Multiple maintainers have told us to start using the tracing
subsystem. Wish granted, this patchset suggested by Noah Klayman
removes a number of verbose and arguably useless dev_dbg or dev_vdbg
logs.
Beyond higher efficiency and less intrusive instrumentation, the use
of bpftrace scripts bring new functionality and helps gather
statistics on usage count on a running system, see how we can get
information on suspend/resume times with [1]
[1] https://github.com/thesofproject/sof-test/blob/main/kernel_tracing/bpftrace_scripts/suspend_resume_time.bt
Some Intel-based platforms rely on a topology file that hard-codes the
use of MCLK0. This is incorrect in 10% of the cases. Rather than
generating yet another set of topology files, this patch adds a kernel
module parameter to override the topology value.
In hindsight, we should never have allowed mclks to be specified in
topology, this is a hardware-level information that should not have
been visible in the topology.
Future patches will try to set this value automagically, e.g. by
parsing the NHLT content.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SSP count is incorrect for TGL and MTL devices, the SSP count is
limited to 3 (I2SPC parameter in the Integration HAS).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some Chrome platforms if OEM's use their own string as SYS_VENDOR than
"Google", it leads to firmware load failure from intel/sof/community path.
Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used
as common prefix and is supported in all Chrome platforms.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919114429.42700-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062511.153962-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch replaces dev_vdbg with tracepoints in new ipc4-loader code.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes unneeded dev_vdbg calls and replaces remaining ones
with tracepoints to reduce overhead and enable use of trace collection
and analysis tools.
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch replaces all dev_vdbg calls with tracepoints to reduce
overhead and enable use of trace collection and analysis tools.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Intel HDaudio controller relies on a single interrupt line which
wire-ORs multiple interrupt sources, such as stream, IPC, SoundWire and
wakes. This patch adds the ability to trace each event occurrence.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enables tracking of use_count during widget setup and free routines.
Useful for debugging unbalanced use_counts during suspend/resume.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the mtrace type for platforms supported by IPC4.
Note: currently only SOF_IPC4_MTRACE_INTEL_CAVS_2 type is supported by
the ipc4-mtrace driver, which is used by CAVS 2.x platforms (ICL, TGL, ADL)
and ACE (MTL).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implementation of low level, platform dependent IPC4 message handling
and set the DSP ops for IPC4 for ICL platform.
Suggested-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One of the debugging/logging features for an IPC4 based firmware is the use
of the debug window to deliver log messages to host via the shared SRAM.
The initial implementation of the mtrace supports only TGL/MTL style of
logging, but can be extended to support other types, like APL, SKL, CNL,
etc.
The window is split into 16 'slots' where the first slot contains the
descriptors for the remaining 15 slots.
Each DSP core logs to a separate slot and the slot allocation is not fixed,
we can not assume that the first slot is always used by core0 for example.
The firmware sends LOG_BUFFER_STATUS message when new log batch is
available from one of the cores (after it updated the write_ptr in the
given slot).
Host should update the read_ptr in the same slot when it has taken out log
data.
The patch also updates the sof_ipc4_fw_data struct with parameters needed
for the mtrace to be enabled and used safely.
Co-developed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The debug window for IPC4 compatible firmware is always window #2,
set the debug_box.offset accordingly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the index number directly, add a define for the outbox
window index.
It is always window 1 with IPC4.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print messages when the SOF_DBG_PRINT_DMA_POSITION_UPDATE_LOGS flag
is not set to reduce the amount of prints when the tracing is used.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220909114332.31393-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support devicetree by adding a snd_soc_of_mach array, specifying SOF
topologies for a generic MT8195 machine and for Google Tomato
Chromebooks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the .mailbox_{read,write} generic callbacks for SOF IPC and, while
at it, also change the ipc_msg_data callback to use the SOF API
sof_ipc_msg_data() instead of the custom function mt8195_ipc_msg_data().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220906092727.37324-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Continuation of recent upstream discussion [1] regarding user string
tokenization.
First, parse_int_array_user() is introduced to allow for splitting
specified user string into a sequence of integers. Makes use of
get_options() internally so the parsing logic is not duplicated.
With that done, redundant parts of the sound driver are removed.
Originally similar functionality was added for the SOF sound driver. As
more users are on the horizon, it is desirable to update existing
string_helpers code and provide a unified solution.
Make use of global integer-array parsing helper instead of the internal
one as both serve same purpose. With that, both strsplit_u32() and
tokenize_input() become unused so remove them.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220904102840.862395-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
From current design in sof_machine_check the SOF can only support
ACPI type machine.
In sof_machine_check if there is no ACPI machine exist, the function
will return -ENODEV directly, that's we don't expected if we do not
base on ACPI machine.
So we add a new function named sof_of_machine_select that we can pass
sof_machine_check and obtain info required by snd_sof_new_platform_drv.
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220903032151.13664-1-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added a new copy function used to copy data to user buffer
in the case of compress capture.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20220822101502.17644-3-laurentiu.mihalcea@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since we're preparing to add support for compress capture,
we need to move the content of sof_compr_copy into a
separate function which handles the playback direction just
like the initial sof_compr_copy.
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20220822101502.17644-2-laurentiu.mihalcea@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After using 'res_node' returned by of_parse_phandle(), of_node_put()
need be called to decrease the refcount.
Fixes: fb5319af6a ("ASoC: SOF: imx: Add i.MX8ULP HW support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220824013234.375738-2-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To make sure that we start from a clean state next time when the DSP is
powered up after a firmware crash or boot failure we must skip the IMR
booting attempt.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220823124359.24865-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware image must start with an extended manifest. Add a check to make
sure that the image does contain it.
The magic number (the first u32 of a firmware image if manifest is present)
for an IPC4 image must be 0x31454124 (ASCI "$AE1").
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220823124219.927-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
The FSR (Firmware State Register) holds the ROM state information, it does not
contain error information.
The FSR itself is a bit more complicated as well as the state depends on the
module currently in use.
The error code from ROM or the status code from the firmware is located at the
next register.
Fix the handling of the FSR in order to provide usable and human readable (in
most cases) report on the status and error.
Regards,
Peter
---
Peter Ujfalusi (3):
ASoC: SOF: Intel: hda: Correct the ROM/FW state reporting code
ASoC: SOF: Intel: hda-loader: Use the FSR state definitions during
bootup
ASoC: SOF: Intel: hda: Drop no longer used ROM state definitions
sound/soc/sof/intel/hda-loader.c | 10 +--
sound/soc/sof/intel/hda.c | 147 ++++++++++++++++++++++++++-----
sound/soc/sof/intel/hda.h | 69 +++++++++++++--
3 files changed, 194 insertions(+), 32 deletions(-)
--
2.37.0
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
There is still a chance to end up with a client driver selected as built in
while the core SOF is as module.
Fix this by making the client drivers depend on SND_SOC_SOF.
From current design in sof_machine_check and snd_sof_new_platform_drv,
the SOF can only support ACPI type machine.
1. In sof_machine_check if there is no ACPI machine exist, the function
will return -ENODEV directly, that's we don't expected if we do not
base on ACPI machine.
2. In snd_sof_new_platform_drv the component driver need a driver name
to do ignore_machine, currently the driver name is obtained from
machine->drv_name, and the type of machine is snd_soc_acpi_mach.
So we add a new function named sof_of_machine_select that we can pass
sof_machine_check and obtain info required by snd_sof_new_platform_drv.
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Link: https://lore.kernel.org/r/20220805070449.6611-2-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All code have been switched to use the new FSR defines and macros for
ROM/FW state tracking.
The old definitions can be dropped now.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712125734.30512-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to use the newly added FSR (Firmware State Register) definitions
for DSP state handling and targeting.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712125734.30512-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that the IPC_MESSAGE_INJECTOR client can not be built in when
SND_SOC_SOF is built as module.
Fixes: cac0b0887e ("ASoC: SOF: Convert the generic IPC message injector into SOF client")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220823121554.4255-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that the IPC_FLOOD client can not be built in when SND_SOC_SOF is
built as module.
Fixes: 6e9548cdb3 ("ASoC: SOF: Convert the generic IPC flood test into SOF client")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220823121554.4255-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_posn is set but never used. Initial intention was
to use dai_posn to shorthen one code line but it looks fine
without it too.
Fixes: c1a731c713 ("ASoC: SOF: compress: Add support for computing timestamps")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220822174937.254873-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds skeleton support for the audio DSP hardware found on
NXP i.MX8ULP platform.
On i.MX8ULP resources (clocks, power, etc) are managed by the
System Integration Module in LPAV domain and XRDC which is handled
by arm trusted firmware.
Signed-off-by: Zhang Peng <peng.zhang_8@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1660787634-28550-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It should be size of the struct sof_ipc4_src, not data pointer pass to
sof_update_ipc_object().
Fixes: b85f4fc40d ("ASoC: SOF: add ipc4 SRC module support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220818081751.2407066-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To make snd_hda_codec_device_init() the only constructor for struct
hda_codec instances remaining tasks are:
1) no struct may wrap struct hda_codec as its base type
2) bus drivers (skylake and sof) which are the current hdac_ext users
need to be adjusted to make use of newly added codec init and exit
routines instead
3) as bus drivers (skylake and sof) are to be responsible for creating
codec device and assigning it to hdac_hda_priv->codec,
hdac_hda_dev_probe() has to be freed of that job
To keep git bisect happy, all of these in made in one-go.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220816111727.3218543-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Preliminary step in making snd_hda_codec_device_init() the only
constructor for struct hda_codec instances. To do that, existing usage
of hdac_ext equivalents has to be dropped.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220816111727.3218543-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We compute the number of pcm_io_frames by dividing the
dai position to size of a frame (channels * sample size).
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220817080529.10864-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The purpose of this change is to enable the saving of the
channel count and sample container bytes format parameters for later use
to compute the timestamps.
This is done when setting the compress stream parameters
(in sof_compr_set_params).
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220817080529.10864-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will keep SOF compress stream private data. So far
we used snd_compr_tstamp to hold the private data but this
is no longer enough as we need to hold other info like
number of channels or sample bytes.
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220817080529.10864-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Byte offset is the offset in the ring buffer to the DSP
while posn_offset is an offset inside the stream_box where
we keep position information.
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220817080529.10864-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Takashi Iwai <tiwai@suse.de>:
This is a patch series to paper over the theoretical buffer overflow
that might be caused by snprintf(). snprintf() is notorious for its
behavior and the usage of a safer version, scnprintf(), is
recommended.
When building with Clang we encounter these warnings:
| sound/soc/sof/ipc3-topology.c:2343:4: error: format specifies type
| 'unsigned char' but the argument has type 'int' [-Werror,-Wformat]
| SOF_ABI_MAJOR, SOF_ABI_MINOR, SOF_ABI_PATCH);
| ^~~~~~~~~~~~~~~^~~~~~~~~~~~~~~^~~~~~~~~~~~~
Use correct format specifier `%d` since args are of type int.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220803204442.2996580-1-justinstitt@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).
This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.
Fixes: 29c8e4398f ("ASoC: SOF: Intel: hda: add extended rom status dump to error log")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801165420.25978-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).
This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.
Fixes: 5b10b62989 ("ASoC: SOF: Add `memory_info` file to debugfs")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801165420.25978-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add cont_update_posn to platform parameters to support
continue update position for platform.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220725195343.145603-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should have a limited trust in the BIOS and verify that the SSP
index reported in NHLT is valid for each platform.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220725195343.145603-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Set of updates for IPC3, IPC4, MTL support and cleanups for the
topology filename override which was broken for HDaudio platforms.
We should be consistent and always test that the DMA buffer is
allocated before continuing with the hw_params setup.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
assign/free are not well aligned to usual conventions and specifically
not to the compressed ops that make use of the probe callbacks.
Use the more common startup/shutdown. No functional change beyond
renaming.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We do all kinds of renaming tricks that get in the way of kernel
parameter and DMI quirk overrides at a higher level.
Tested on UpExtreme board with
options snd-sof-pci tplg_filename=sof-hda-generic.tplg
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_filename is now set at a higher level and can be overridden by
kernel parameters or DMI quirks.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fixup_tplg_name() doesn't need to keep the string, allocated for
filename - it's temporary.
Inspired by similar change for hda:
commit b9088535e1 ("ASoC: SOF: Intel: HDA: don't keep a temporary variable")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Print out the found extended manifest magic number in case it is not
matching with the expected one (0x6e614d58) in debug level.
It is fairly unlikely that the firmware does not have ext_man section and
the found value in place of the magic number can help rootcausing boot
related issues.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the domain bit in ipc msg for module initialization is
set to lp (low power) mode for pipeline. This is not correct since
it is for module domain type: ll domain or dp domain which are for
scheduler in fw. If the domain bit is set to 1 fw will process the
module in dp domain or deal it with ll domain. So set domain bit
based on dp domain setting.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC module only needs two parameters : base module config
and sink rate. This patch adds prepare and setup for SRC
widgets.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dsp converts pcm rate to the one defined by dai. When SRC
is used, the pcm runtime rate is different with dai rate
and we need to fix it up for BE components.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code allocate/release instance_id in widget ipc_prepare/
ipc_unprepare callbacks and creating widget with the instance_id in
tplg widget_setup callback. In the case of multiple widgets connecting
to one widget, the ipc_unprepare will be invoked for all the widgets
in the path including the widget which is still in use.
As a result, the instance_id is released in the ipc_unprepare callback,
but the widget is still in use and the instance_id will be reused by
a new widget when we start the PCM again.
Moving the ida work from ipc_prepare/ipc_unprepare to widget_setup/free
can avoid such problem.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop redundant CPA bit check after polling the same condition.
Fixes: 064520e8ae ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220715145216.277003-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When PCH-attached DMICs are used on a SoundWire-based platform, all
known devices pin-mux SoundWire link2 and link3 with DMIC, and only
use link0 and link1 for SoundWire.
The HP Omen16 is the first exception to the rule, with SoundWire using
link0 and link3. Rather than using a fixed mask, let's count the
number of SoundWire links used.
BugLink: https://github.com/thesofproject/sof/issues/5966
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220715144144.274770-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two bugs that have to do with when we copy the payload:
size = simple_write_to_buffer(ipc4_msg->data_ptr,
priv->max_msg_size, ppos, buffer,
count);
The value of "*ppos" was supposed to be zero but it is
sizeof(ipc4_msg->header_u64) so it will copy the data into the middle of
the "ipc4_msg->data_ptr" buffer instead of to the start. The second
problem is "buffer" should be "buffer + sizeof(ipc4_msg->header_u64)".
This function is used for fuzz testing so the data is normally random
and this bug likely does not affect anyone very much.
In this context, it's simpler and more appropriate to use copy_from_user()
instead of simple_write_to_buffer() so I have re-written the function.
Fixes: 066c67624d ("ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Ysg1tB2FKLnRMsel@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
For IPC4, we need to set pipeline state in BE DAI trigger.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220708061312.25878-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The FSR (Firmware State Register) holds the ROM state information, it does not
contain error information.
The FSR itself is a bit more complicated as well as the state depends on the
module currently in use.
The error code from ROM or the status code from the firmware is located at the
next register.
Fix the handling of the FSR in order to provide usable and human readable (in
most cases) report on the status and error.
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>
Daniel Baluta <daniel.baluta@nxp.com>:
From: Daniel Baluta <daniel.baluta@nxp.com>
We need a way to send extra parameters to DSP firmware. In order to do
this, we introduce ext_data array at the end of ipc_stream_params.
With this new addition we can send compress parameters.
This requires SOF ABI bump.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
By mistake a developer managed to create a 'corrupted' IPC4 firmware image which
loaded fine to the DSP and after boot it sent an IPC reply before we would have
received the FW_READY message.
It turned out that the image was an IPC3 firmware and the IPC reply was the IPC3
FW_READY notification message which got understood as an IPC4 reply message due
to the difference between the two IPC mechanism.
This caused a NULL pointer dereference since the reply memory will be allocated
after the FW_READY message.
To make sure this will not bite again, skip any spurious reply messages before
the FW_READY.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
There is no need to decouple a decoupled stream twice.
Keep the decoupling in hda_link_stream_assign() only as it is going to be
executed in all cases.
Drop the outdated comment from hda_link_dma_hw_params() as well since the code
has changed around it.
We have sanity checks for byte controls and if any of the fail the locally
allocated scontrol->ipc_control_data is freed up, but not set to NULL.
On a rollback path of the error the higher level code will also try to free
the scontrol->ipc_control_data which will eventually going to lead to
memory corruption as double freeing memory is not a good thing.
Fixes: b5cee8feb1 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Reported-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712130103.31514-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current implementation of probes only supports IPC3 and should not be
loaded for other IPC implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712131022.1124-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
In case of a firmware crash we force the DSP to be powered down and rebooted.
To make sure that the next boot is going to be clean, force the boot process to
skip the IMR booting and re-download the firmware.
After introducing extended parameters we need to forbid older firmware
versions to run with the current and future kernel versions.
Although in theory the communication protocol will still work the
semantics at application level are undefined. So, prevent this by
disallowing older firmwares to run with newer kernels.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate memory at the end of sof_ipc_stream_params to store
snd_compr_params in order to be sent them to SOF firmware.
This will help firmware correctly configure codecs parameters.
Notice, that we use 2 bytes from the reserved pool in order to store
the extended data length. This is compatible with older FWs where
there was no extended data.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to extend sof_ipc_pcm_parmas with additional data in order
to send compress_params to SOF FW.
The extensions will be done at runtime so we need to dynamically
allocate pcm object of type struct sof_ipc_pcm_params.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Call snd_hdac_ext_stream_decouple_locked() unconditionally in
hda_link_stream_assign(), the snd_hdac_ext_stream_decouple_locked() have
internal checks to avoid re-configuring.
There is no need to call snd_hdac_ext_stream_decouple() via
hda_link_dma_params() as the stream must have been set to decoupled when
it got assigned (even if it used local condition to call
snd_hdac_ext_stream_decouple_locked()).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712131620.13365-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The comment in hda_link_dma_hw_params() is no longer valid as the dma_data
is set to NULL at system suspend as well.
Instead of rewording the comment to state the obvious: try to take the
hext_stream from the dma_data and if it is not set then assign a new one
and store it as dma_data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712131620.13365-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FSR (Firmware State Register) can be found at offset 0 in the SRAM and
it is holding information about the state of the ROM/FW.
In case of a boot failure it can be used to get the state where the boot
process got stuck, it does not itself contains error codes as such.
The error code (or the firmware state information) is stored in the next
soft register at offset 0x4.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712125734.30512-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'ret' is never used. Remove it and return 0 instead.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712123902.14696-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a dedicated flag instead of directly checking the
sdev->system_suspend_target to decide if we need to skip IMR boot due to
too deep sleep state where the memory used for IMR booting will not retain
its content.
The skip_imr_boot flag will be set true during suspend if the target state
is deeper than S3 and reset back to false on successful boot to re-enable
IMR booting in shallower sleep states.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712120936.28072-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712122357.31282-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3.
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712122357.31282-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3.
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712122357.31282-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Two patches to improve error and memory handling. When IPC4 is used,
some of the flows were incorrect.
We should only have an error when enforcing strict mapping between
kernel and firmware versions. In all other cases, there is no reason
to throw a warning.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200719.26961-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Revise hifixdsp shutdown flow to pull runstall high then reset high.
2. Add 1 us delay between D/BRESET high and low for 10 DSP cycles(26M)
based on IP vendor's suggestion.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Li-Yu Yu <afg984@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: KuanHsun Cheng <Allen-KH.Cheng@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220708203904.29214-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Free the memories allocated in sof_ipc4_get_audio_fmt in error handling
and ipc_free()
Fixes: 2cabd02b60 ("ASoC: SOF: ipc4-topology: Add support for parsing AIF_IN/AIF_OUT widgets")
Fixes: abfb536bd1 ("ASoC: SOF: ipc4-topology: Add support for parsing DAI_IN/DAI_OUT widgets")
Fixes: 4f838ab208 ("ASoC: SOF: ipc4-topology: Add support for parsing and preparing pga widgets")
Fixes: 4d4ba014ac ("ASoC: SOF: ipc4-topology: Add support for parsing mixer widgets")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200516.26853-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the swidget->private or dai->private to NULL after kfree in the error
handling in ipc_setup(). The private needs to be set NULL because if
ipc_setup() returns error, ipc_free() will be called later. ipc_free()
will judge the private is NULL or not to do the clearing.
For dai widget, dai->private is allocated and set in dai widget
ipc_setup(). So we need to check dai->private is NULL or not
in the ipc_free().
Fixes: 2cabd02b60 ("ASoC: SOF: ipc4-topology: Add support for parsing AIF_IN/AIF_OUT widgets")
Fixes: abfb536bd1 ("ASoC: SOF: ipc4-topology: Add support for parsing DAI_IN/DAI_OUT widgets")
Fixes: 4f838ab208 ("ASoC: SOF: ipc4-topology: Add support for parsing and preparing pga widgets")
Fixes: 4d4ba014ac ("ASoC: SOF: ipc4-topology: Add support for parsing mixer widgets")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200516.26853-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220705161102.76250-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220705161102.76250-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-30-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The enablement of IMR-based DSP boot helped reduce resume latency, but
unfortunately the context is not saved in S4 and S5 which leads to
multiple reports of boot failures.
This patchset forces a full firmware reload/reboot when resuming from
S4/S5 and restores functionality.
Before initiating IPC and/or bus transactions when loading the
topology during a component probe, which happens on card
registration/creation, make sure the device for the SOF driver is
pm_runtime active.
The SOF probe is not necessarily followed by the component probe, such
a timing assumption can be broken in driver bind/unbind tests. This
can be artifially shown if the module for the machine driver is
'blacklisted' and the SOF device becomes pm_runtime_suspended before
manually calling modprobe to register the card.
In an initial experiment, pm_resume_and_get() was called from
soc-component.c, since the current ASoC component model is arguably
missing dependencies between component status and device
status. However this approach proved too invasive and breaks all
existing HDMI playback solutions on Intel platforms.
While this will result in duplication of code, generating pm_runtime
transitions only if strictly required for a given component makes more
sense overall. This patch adds the pm_runtime resume transition for
SOF only.
BugLink: https://github.com/thesofproject/linux/issues/3651
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220616210825.132093-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module and function information can be added with
'modprobe foo dyndbg=+pmf'
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220616215351.135643-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
