ASoC has 2 functions to set bias level.
(A) snd_soc_dapm_force_bias_level()
(B) snd_soc_dapm_set_bias_level()
snd_soc_dapm_force_bias_level() (A) will set dapm->bias_level (a) if
successed.
(A) int snd_soc_dapm_force_bias_level(...)
{
...
if (ret == 0)
(a) dapm->bias_level = level;
...
}
snd_soc_dapm_set_bias_level() (B) is also a function that sets bias_level.
It will call snd_soc_dapm_force_bias_level() (A) inside, but doesn't
set dapm->bias_level by itself. One note is that (A) might not be called.
(B) static int snd_soc_dapm_set_bias_level(...)
{
...
ret = snd_soc_card_set_bias_level(...);
...
if (dapm != &card->dapm)
(A) ret = snd_soc_dapm_force_bias_level(...);
...
ret = snd_soc_card_set_bias_level_post(...);
...
}
dapm->bias_level will be set if (A) was called, but might not be set
if (B) was called, even though it calles set_bias_level() function.
We should set dapm->bias_level if we calls
snd_soc_dapm_set_bias_level() (B), too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzyn4g4h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because functions are defined randomly, it needs function name
definitions on top of soc-dapm.c. it is not needed if functions
are implemented in correct order.
This patch has big change from change-line point of view, but is
just reordering, nothing changed in meaning.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzz0hit6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No one is using snd_soc_dapm_weak_routes(), let's remove it.
Because snd_soc_dapm_weak_routes() was removed, path->weak is not
needed either. Remove it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sejghitd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_nc_pin() was added in commit 5817b52a29 ("ALSA: ASoC: Allow
machine drivers to mark pins as not connected") at 2008.
It is identical to snd_soc_dapm_disable_pin[_unlocked](). It was expected
to be updated, but were enough as-is for this 17 years.
We might update these, but renaming function name by define is enough
for now. We can re-create these if needed in the future. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt3whitj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_free() is called from soc-dapm.c / soc-core.c only. All these
are compiled by snd-soc-core-y. So EXPORT_SYMBOL_GPL() is not needed. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7ochitp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Below functions are already defined in soc-dapm.h, it is not necessary
in soc-dapm.c. Remove these
snd_soc_dapm_new_control()
snd_soc_dapm_new_control_unlocked()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wm8shitv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core currently supports pin switches for source/sink widgets, but
only at the card level. SDCA components specify the fabric at the
level of the individual components, to support this add helpers to
allow component level pin switches.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card :: update is used only for passing parameters to
dapm_widget_update() like below.
card->update = update;
ret = soc_dapm_xxx(card, ...);
card->update = NULL;
Let's passing it via function parameter and remove update from
snd_soc_card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldubyjz9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The symbol provider (sound/soc/soc-dapm.c) and the symbol consumer
(sound/soc/soc-core.c) belong to the same module, snd-soc-core.ko.
There is no need to export it.
I deleted the comment, as other modules cannot use it any more.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patch.msgid.link/20250205165310.3466254-1-masahiroy@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The symbol provider (sound/soc/soc-dapm.c) and the symbol consumer
(sound/soc/soc-pcm.c) belong to the same module, snd-soc-core.ko.
There is no need to export it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patch.msgid.link/20250205165337.3466336-1-masahiroy@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The symbol provider (sound/soc/soc-dapm.c) and the symbol consumer
(sound/soc/soc-core.c) belong to the same module, snd-soc-core.ko.
There is no need to export it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://patch.msgid.link/20250205165226.3466137-1-masahiroy@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec driver can implement .hw_params and/or .prepare from struct
snd_soc_dai_ops. For codec-to-codec links only the former (.hw_params)
callback has been called.
On platforms like Amlogic Meson8/8b/8m2 the SoC's sound card
(sound/soc/meson/gx-card.c) uses a codec-to-codec link for the HDMI
codec output because further digital routing is required after the
backend. The new DRM HDMI (audio) codec framework (which internally
uses sound/soc/codecs/hdmi-codec.c) relies on the .prepare callback
of the hdmi-codec to be called. Implement calls to
snd_soc_dai_prepare() so the .prepare callback is called. In this
case the mandatory part is the call to prepare the sink (which is
the hdmi-codec on those platforms). Also call snd_soc_dai_prepare()
for the source to stay consistent with the rest of the code (even
though it's not strictly necessary to make the DRM HDMI codec
framework work on Amlogic Meson8/8b/8m2).
For platforms or sound cards without a codec-to-codec link with
additional parameters (which applies to most hardware) this changes
nothing as the .prepare callback is already called via
snd_pcm_do_prepare() (as well as dpcm_fe_dai_prepare() and
dpcm_be_dai_prepare()) on those.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250114215617.336105-3-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dapm is setup by snd_soc_dapm_init(), thus dapm->card never been NULL.
We don't need if (!card) check for it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877c6ytd9t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The widgets array in the snd_soc_dapm_widget_list has a __counted_by
attribute attached to it, which points to the num_widgets variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of the widgets list calculated with
list_for_each as the initial value for num_widgets as it is used for
allocating memory for the array. It is updated with the actual number of
added elements after the array is filled.
Signed-off-by: Aleksei Vetrov <vvvvvv@google.com>
Fixes: 80e698e2df ("ASoC: soc-dapm: Annotate struct snd_soc_dapm_widget_list with __counted_by")
Link: https://patch.msgid.link/20241028-soc-dapm-bounds-checker-fix-v1-1-262b0394e89e@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current implementation does not work for widgets of DAPMs without
component, as snd_soc_dapm_to_component() requires it. If the widget is
directly owned by the card, e.g. as it is the case for the tegra
implementation, the call leads to UB. Therefore directly access the
component of the widget's DAPM to be able to check if a component is
available.
Fixes: f82eb06a40 ("ASoC: tegra: machine: Handle component name prefix")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://patch.msgid.link/20241008-tegra-dapm-v2-1-5e999cb5f0e7@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbko34ACgkQJNaLcl1U
h9CQiwf9HseC6VkNQ0ISVZ2UsSf8K/HsHsdBGl7/CRr0SEvS3pszYMkKPbhRggsF
aQ4nfitXeN7Vo6S0tNXx63wzjpMPkjrHdV0XY+WJxfuCaeb3DHFEJ4uvlgv53aoh
M+wz1aldvKWjDPwhkzcJEaneQ36U7OlUSBsbFHR82dBDguEm+h29tAxTuLlwL5Zb
M8NuSfbh0cfY9Kk1cPGsqaHD8wjUeg6/Q5qnbDg2kAm0aF1fAxfyFKRX6Z5s9ekd
LeU3EIdRbI8UlHv7Afl0UKDYtYqL1ubwmjDb45HnsE4FmNEmDEbf8c1adRumZAjm
Js9yzswiaaHAvotCaEstFC6HYUL+oQ==
=jugn
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240828122829.3697502-1-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using kernel with the following extra config,
- CONFIG_KASAN=y
- CONFIG_KASAN_GENERIC=y
- CONFIG_KASAN_INLINE=y
- CONFIG_KASAN_VMALLOC=y
- CONFIG_FRAME_WARN=4096
kernel detects that snd_pcm_suspend_all() access a freed
'snd_soc_pcm_runtime' object when the system is suspended, which
leads to a use-after-free bug:
[ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270
[ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330
[ 52.047785] Call trace:
[ 52.047787] dump_backtrace+0x0/0x3c0
[ 52.047794] show_stack+0x34/0x50
[ 52.047797] dump_stack_lvl+0x68/0x8c
[ 52.047802] print_address_description.constprop.0+0x74/0x2c0
[ 52.047809] kasan_report+0x210/0x230
[ 52.047815] __asan_report_load1_noabort+0x3c/0x50
[ 52.047820] snd_pcm_suspend_all+0x1a8/0x270
[ 52.047824] snd_soc_suspend+0x19c/0x4e0
The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before
making any access. So we need to always set 'substream->runtime' to NULL
everytime we kfree() it.
Fixes: a72706ed82 ("ASoC: codec2codec: remove ephemeral variables")
Signed-off-by: robelin <robelin@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-2-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in
snd_soc_dai_link_event_pre_pmu() to reduce error handling (less error
paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-11-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in dapm_cnew_widget() to
reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-10-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Number of widgets in array passed to snd_soc_dapm_new_controls() cannot
be negative, so make it explicit by using 'unsigned int', just like
snd_soc_add_component_controls() is doing.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701-b4-qcom-audio-lpass-codec-cleanups-v3-4-6d98d4dd1ef5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To make the widget debugfs files more informative, add a line showing the
widget type string.
Keeping backward compatibility is nice to have being debugfs, and ease of
parsing by both humans and software is also good. To maximize both with a
reasonable effort add a new line without thouching the already complex
format of the first line. The syntax is meant to be a key/value pair.
The existing vizdapm tool continues working after this change, ignoring the
new line.
The new format is:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
widget-type adc
out "static" "Capture" "cs42l51.0-004a"
in "static" "Left PGA" "cs42l51.0-004a"
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240416-vizdapm-ng-v1-2-5d33c0b57bc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
debugfs entries for DAPM widgets have the following form:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
out "static" "Capture"
in "static" "Left PGA"
Lines with the "in" and "out" prefixes describe routes from/to other
widgets presenting the path name and the connected widget name.
This is ambiguous in case of cards having multiple widgets with the same
name in different components. For example the STM32MP157A-DK1 board
(arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi) has a "Capture" widget in both
the "cs42l51.0-004a" and the "hdmi-audio-codec.1.auto" components.
Avoid the ambiguity by adding the component name to the "in" and "out"
lines. Add the new field at the end to minimize backward compatibility
issues. The existing vizdapm tool continues working after this change.
The output becomes:
Left ADC: Off in 1 out 0 - R2(0x2) mask 0x2
stream Left HiFi Capture inactive
out "static" "Capture" "cs42l51.0-004a"
in "static" "Left PGA" "cs42l51.0-004a"
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240416-vizdapm-ng-v1-1-5d33c0b57bc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC CPU:Codec = N:M connection is using connection mapping idea,
but it is used for N < M case only. We want to use it for any case.
By this patch, not only N:M connection, but all existing connection
(1:1, 1:N, N:N) will use same connection mapping. Then, because it will
use default mapping, no conversion patch is needed to exising drivers.
More over, CPU:Codec = N:M (N > M) also supported in the same time.
ch_maps array will has CPU/Codec index by this patch.
Image
CPU0 <---> Codec0
CPU1 <-+-> Codec1
CPU2 <-/
ch_map
ch_map[0].cpu = 0 ch_map[0].codec = 0
ch_map[1].cpu = 1 ch_map[1].codec = 1
ch_map[2].cpu = 2 ch_map[2].codec = 1
Link: https://lore.kernel.org/r/87fs6wuszr.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/878r7yqeo4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/87ttpq4f2c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New DAPM widgets are created based on a provided template. When cloning
the data, the name and stream name also need to be cloned. Currently the
data and the names are initialized in different places. Simplify the
code by having entire initialization in one place.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026113549.1897368-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The name currently used to get the clock includes the dapm prefix.
It should use the name as provided to the widget, without the prefix.
Fixes: 3caac75968 ("ASoC: soc-dapm.c: fixup snd_soc_dapm_new_control_unlocked() error handling")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20231106103712.703962-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some drivers use one event callback for multiple widgets but still need
to perform a bit different actions based on actual widget. This is done
by comparing widget name, however drivers tend to miss possible name
prefix. Add a helper to solve common mistakes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155710.821315-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct snd_soc_dapm_widget_list.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: alsa-devel@alsa-project.org
Cc: linux-hardening@vger.kernel.org
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231003232852.work.257-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ledcp8tk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing soc-dapm code may add a prefix to control names, which in
some cases is useful but in others leads to long and confusing kcontrol
names such as "gain 2.1 Main Playback Volume".
This patch suggests an added flag to prevent the widget name prefix
from being added. That flag will be set in the topology file on a
per-widget basis.
The flag no_wname_in_kcontrol_name is added to struct snd_soc_dapm_widget,
and the logic in dapm_create_or_share_kcontrol() is changed to not to
add widget name if the flag is set.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814232325.86397-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, ASoC supports dailinks with the following mappings:
1 cpu DAI to N codec DAIs
N cpu DAIs to N codec DAIs
But the mapping between N cpu DAIs and M codec DAIs is not supported.
The reason is that we didn't have a mechanism to map cpu and codec DAIs
This patch suggests a new snd_soc_dai_link_codec_ch_map struct in
struct snd_soc_dai_link{} which provides codec DAI to cpu DAI mapping
information used to implement N cpu DAIs to M codec DAIs
support.
When a dailink contains two or more cpu DAIs, we should set channel
number of cpus based on its channel mask. The new struct also provides
channel mask information for each codec and we can construct the cpu
channel mask by combining all codec channel masks which map to the cpu.
The N:M mapping is however restricted to the N <= M case due to physical
restrictions on a time-multiplexed bus such as I2S/TDM, AC97, SoundWire
and HDaudio.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230607031242.1032060-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using get_stream_cpu() to get CPU stream which cares
Codec2Codec. But it is static function for now, and we want to use it
from other files. This patch makes it global function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs7cj9mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a widget is added to dapm via snd_soc_dapm_new_widgets,
dapm_debugfs_add_widget is also called to create a corresponding debugfs
file. However, when a widget is freed by snd_soc_dapm_free_widget, the
corresponding debugfs is not cleared. As a result, the freed widget is
still seen in the dapm directory.
This patch adds dapm_debugfs_free_widget to free the debugfs of a
specified widget, and it's called at snd_soc_dapm_free_widget to clean
up the debugfs for freed widget.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc.h has snd_soc_dapm_mutex_lock/unlock() definition and
many drivers are using it, but soc-dapm.c is not.
1st reason is snd_soc_dapm_mutex_lock/unlock() requests
snd_soc_dapm_context pointer as parameter (A), but sometimes soc-dapm.c
needs to use snd_soc_card (B).
(A) static inline void snd_soc_dapm_mutex_lock(struct snd_soc_dapm_context *dapm)
{
mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
} ^^^^^^^^^^
(B) mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
^^^^
2nd reason is it want to use SND_SOC_DAPM_CLASS_INIT for mutex_lock_nested(),
but helper is using _RUNTIME (A).
The conclusion is we want to use "dapm vs card" and "_RUNTIME vs _INIT"
for dapm lock/unlock. To enable this selfish request, this patch uses
_Generic macro. We can use snd_soc_dapm_mutex_lock/unlock() for both
dapm and card case.
snd_soc_dapm_mutex_lock(dapm); snd_soc_dapm_mutex_unlock(dapm);
snd_soc_dapm_mutex_lock(card); snd_soc_dapm_mutex_unlock(card);
Current soc-dapm.c is using both mutex_lock() and mutex_lock_nested().
This patch handles mutex_lock() as mutex_lock_nested(..., 0),
in other words, handles below as same.
mutex_lock(&card->dapm_mutex);
mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_INIT);
Because people might misunderstand that _init() is mutex initialization,
this patch renames _INIT to _ROOT and adds new
snd_soc_dapm_mutex_lock_root() for it.
This patch also moves snd_soc_dapm_subclass definition from soc-dapm.h
to soc.h to keep related code together.
Because very complex soc.h vs soc-dapm.h relationship,
it is difficult/impossible to define these helper into soc-dapm.h.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87cz4hx3v0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dapm_connect_dai_pair() handles
"Normal/Codec2Codec" x "CPU/Codec" x "Playback/Capture".
(A) is "Codec2Codec" case of "CPU" widget x "Playback/Capture",
(B) is "Normal" case of "CPU" widget x "Playback/Capture",
(C) is each case of "Codec" widget.
(X) is handling "Playback" case DAI connecting,
(Y) is handling "Capture" case DAI connecting.
static void dapm_connect_dai_pair(...)
{
...
(A) if (dai_link->params) {
playback_cpu = ...
capture_cpu = ...
(B) } else {
playback_cpu = ...
capture_cpu = ...
}
^ /* connect BE DAI playback if widgets are valid */
| stream = SNDRV_PCM_STREAM_PLAYBACK;
| (C) codec = codec_dai->playback_widget;
|
| if (playback_cpu && codec) {
(X) if (dai_link->params && !rtd->c2c_widget[stream]) {
| ...
| }
|
| (z) dapm_connect_dai_routes(...);
v }
capture:
^ /* connect BE DAI capture if widgets are valid */
| stream = SNDRV_PCM_STREAM_CAPTURE;
| (C) codec = codec_dai->capture_widget;
|
| if (codec && capture_cpu) {
(Y) if (dai_link->params && !rtd->c2c_widget[stream]) {
| ...
| }
|
| (z) dapm_connect_dai_routes(...);
v }
}
(X) part and (Y) part are almost same.
Main purpose of these parts (and this function) is calling
dapm_connect_dai_routes() (= z) on each cases.
The difference is "parameter"
(= Normal/Codec2Codec x CPU/Codec x Playback/Capture).
This patch cleanup these, but nothing changed for meaning.
Link: https://lore.kernel.org/r/87ilen6ni4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cuqvswc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_link has params/num_params, but it is unclear that
params for what. This patch clarify it is params for Codec2Codec.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7o5c2lk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we sequence speakers with line and headphone outputs in DAPM.
This works well when speakers are integrate into a CODEC but when there is
an external speaker driver connected to a line or headphone output it can
mean that the speaker driver ends up getting sequenced such that it picks
up pops and clicks from the CODEC. Mask this by moving speakers after the
other outputs in DAPM.
We may want to consider doing this for headphones too but separate drivers
are less common there and headphone drivers often also function as line
outputs so the situation is less clear.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-asoc-dapm-spk-v1-1-e1f27f766505@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has many helper function.
This patch use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87ilgnea2p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a component has a prefix, and uses a SND_SOC_DAPM_REGULATOR_SUPPLY,
the name of the regulator should not use the prefix, otherwise it won't
be properly matched in the DT/ACPI.
Fixes: 3caac75968 ("ASoC: soc-dapm.c: fixup snd_soc_dapm_new_control_unlocked() error handling")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221025150149.113129-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These are v2 of random cleanup for soc-dpam.c/h.
Basically, these are just cleanup, nothing changed.
