The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-4-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices. I think this takes the
record for the most number of patch series (30+) over the longest
period of time (2+ years) to get merged properly. Many props go to
Wesley Cheng for seeing this effort through, they took a major
out-of-tree hacked-up-monstrosity that was created by multiple
vendors for their specific devices, got it all merged into a
semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees. This feature offers major power savings on embedded
devices where a USB audio stream can continue to flow while the rest
of the system is sleeping, something that devices running on battery
power really care about. There are still some more small tweaks
left to be done here, and those patches are still out for review and
arguing among the different hardware companies, but this is a major
step forward and a great example of how to do upstream development
well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added for
the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKnpA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym3zQCgz+Oz3DHfLcYOX7evGI2PjI4GNMkAoJa6Kndw
h4YgL+8MeBpKuHCQvxy8
=KVAn
-----END PGP SIGNATURE-----
Merge tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
The driver builds cleanly only when CONFIG_OF is enabled, otherwise the
compiler notices an unused symbol:
sound/soc/qcom/qdsp6/q6usb.c:401:34: error: 'q6usb_dai_device_id' defined but not used [-Werror=unused-const-variable=]
The driver does not support legacy board files, so the of_match_ptr()
annotation has no use here and can be removed to avoid the warning.
Fixes: e0dd9240f1 ("ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250523121152.2292574-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the port enable failure error message format specifier to make
it less confusing.
Take the chance to align the style ('fail'->'Failed') while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250514-topic-asoc_print_hexdec-v1-1-85e90947ec4f@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The USB SND path may need to know how the USB offload path is routed, so
that applications can open the proper sound card and PCM device. The
implementation for the QC ASoC design has a "USB Mixer" kcontrol for each
possible FE (Q6ASM) DAI, which can be utilized to know which front end link
is enabled.
When an application/userspace queries for the mapped offload devices, the
logic will lookup the USB mixer status though the following path:
MultiMedia* <-> MM_DL* <-> USB Mixer*
The "USB Mixer" is a DAPM widget, and the q6routing entity will set the
DAPM connect status accordingly if the USB mixer is enabled. If enabled,
the Q6USB backend link can fetch the PCM device number from the FE DAI
link (Multimedia*). With respects to the card number, that is
straightforward, as the ASoC components have direct references to the ASoC
platform sound card.
An example output can be shown below:
Number of controls: 9
name value
Capture Channel Map 0, 0 (range 0->36)
Playback Channel Map 0, 0 (range 0->36)
Headset Capture Switch On
Headset Capture Volume 1 (range 0->4)
Sidetone Playback Switch On
Sidetone Playback Volume 4096 (range 0->8192)
Headset Playback Switch On
Headset Playback Volume 20, 20 (range 0->24)
USB Offload Playback Route PCM#0 0, 1 (range -1->255)
The "USB Offload Playback Route PCM#*" kcontrol will signify the
corresponding card and pcm device it is offload to. (card#0 pcm - device#1)
If the USB SND device supports multiple audio interfaces, then it will
contain several PCM streams, hence in those situations, it is expected
that there will be multiple playback route kcontrols created.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-27-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The headphone jack framework has a well defined infrastructure for
notifying userspace entities through input devices. Expose a jack device
that carries information about if an offload capable device is connected.
Applications can further identify specific offloading information through
other SND kcontrols.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-26-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create a USB BE component that will register a new USB port to the ASoC USB
framework. This will handle determination on if the requested audio
profile is supported by the USB device currently selected.
Check for if the PCM format is supported during the hw_params callback. If
the profile is not supported then the userspace ALSA entity will receive an
error, and can take further action.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-25-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For USB offloading situations, the AFE port start command will result in a
QMI handshake between the Q6DSP and the main processor. Depending on if
the USB bus is suspended, this routine would require more time to complete,
as resuming the USB bus has some overhead associated with it. Increase the
timeout to 3s to allow for sufficient time for the USB QMI stream enable
handshake to complete.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-24-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The QC ADSP is able to support USB playback endpoints, so that the main
application processor can be placed into lower CPU power modes. This adds
the required AFE port configurations and port start command to start an
audio session.
Specifically, the QC ADSP can support all potential endpoints that are
exposed by the audio data interface. This includes isochronous data
endpoints, in either synchronous mode or asynchronous mode. In the latter
case both implicit or explicit feedback endpoints are supported. The size
of audio samples sent per USB frame (microframe) will be adjusted based on
information received on the feedback endpoint.
Some pre-requisites are needed before issuing the AFE port start command,
such as setting the USB AFE dev_token. This carries information about the
available USB SND cards and PCM devices that have been discovered on the
USB bus. The dev_token field is used by the audio DSP to notify the USB
offload driver of which card and PCM index to enable playback on.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-23-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the existing code, the buffer position is only reset in pointer
callback, which leaves the possiblity of it going over the size of
buffer size and reporting incorrect position to userspace.
Without this patch, its possible to see errors like:
snd-x1e80100 sound: invalid position: pcmC0D0p:0, pos = 12288, buffer size = 12288, period size = 1536
snd-x1e80100 sound: invalid position: pcmC0D0p:0, pos = 12288, buffer size = 12288, period size = 1536
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Period sizes less than 6k for capture path triggers overruns in the
dsp capture pipeline.
Change the period size and number of periods to value which DSP is happy with.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.
Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement an helper function in q6apm to be able to read the current
hardware pointer for both read and write buffers.
This should help q6apm-dai to get the hardware pointer consistently
without it doing manual calculation, which could go wrong in some race
conditions.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
With the existing code, we are only setting up one period at a time, in a
ping-pong buffer style. This triggers lot of underruns in the dsp
leading to jitter noise during audio playback.
Fix this by scheduling all available periods, this will ensure that the dsp
has enough buffer feed and ultimatley fixing the underruns and audio
distortion.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Cc: stable@vger.kernel.org
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250314174800.10142-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of attempts to compress playback something, for instance,
when audio routing is not set up correctly, the audio DSP is left in
inconsistent state because we are not doing the correct things in
the error path of q6asm_dai_compr_set_params().
So, when routing is not set up and compress playback is attempted
the following errors are present (simplified log):
q6routing routing: Routing not setup for MultiMedia-1 Session
q6asm-dai dais: Stream reg failed ret:-22
q6asm-dai dais: ASoC error (-22): at snd_soc_component_compr_set_params()
on 17300000.remoteproc:glink-edge:apr:service@7:dais
After setting the correct routing the compress playback will always fail:
q6asm-dai dais: cmd = 0x10db3 returned error = 0x9
q6asm-dai dais: DSP returned error[9]
q6asm-dai dais: q6asm_open_write failed
q6asm-dai dais: ASoC error (-22): at snd_soc_component_compr_set_params()
on 17300000.remoteproc:glink-edge:apr:service@7:dais
0x9 here means "Operation is already processed". The CMD_OPEN here was
sent the second time hence DSP responds that it was already done.
Turns out the CMD_CLOSE should be sent after the q6asm_open_write()
succeeded but something failed after that, for instance, routing
setup.
Fix this by slightly reworking the error path in
q6asm_dai_compr_set_params().
Tested on QRB5165 RB5 and SDM845 RB3 boards.
Cc: stable@vger.kernel.org
Fixes: 5b39363e54 ("ASoC: q6asm-dai: prepare set params to accept profile change")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20250327154650.337404-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbko34ACgkQJNaLcl1U
h9CQiwf9HseC6VkNQ0ISVZ2UsSf8K/HsHsdBGl7/CRr0SEvS3pszYMkKPbhRggsF
aQ4nfitXeN7Vo6S0tNXx63wzjpMPkjrHdV0XY+WJxfuCaeb3DHFEJ4uvlgv53aoh
M+wz1aldvKWjDPwhkzcJEaneQ36U7OlUSBsbFHR82dBDguEm+h29tAxTuLlwL5Zb
M8NuSfbh0cfY9Kk1cPGsqaHD8wjUeg6/Q5qnbDg2kAm0aF1fAxfyFKRX6Z5s9ekd
LeU3EIdRbI8UlHv7Afl0UKDYtYqL1ubwmjDb45HnsE4FmNEmDEbf8c1adRumZAjm
Js9yzswiaaHAvotCaEstFC6HYUL+oQ==
=jugn
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all drivers below sound/soc to use .remove(), with the eventual
goal to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just
changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The custom rate constraint list was necessary to support 12kHz and 24kHz.
These rates are now available through SNDRV_PCM_RATE_12000 and
SNDRV_PCM_RATE_24000.
Use them and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-10-8371948d3921@baylibre.com
Allocate memory, which is being freed at end of the scope, with
scoped/cleanup.h to reduce number of error paths and make code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701171917.596173-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is an issue around with error handling and graph management with
the exising code, none of the error paths close the graph, which result in
leaving the loaded graph in dsp, however the driver thinks otherwise.
This can have a nasty side effect specially when we try to load the same
graph to dsp, dsp returns error which leaves the board with no sound and
requires restart.
Fix this by properly closing the graph when we hit errors between
open and close.
Fixes: 30ad723b93 ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # X13s
Link: https://lore.kernel.org/r/20240613-q6apm-fixes-v1-1-d88953675ab3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
X1E80100 CRD is the first board, which comes with four speakers, so we
still keep fixing and adding missing pieces.
The board has speaker arranged as left front+back and then right
front+back. Using default channel mapping causes front right speaker to
play left back stream.
Adjust the channel maps for frontend DAIs to fix stereo and four-channel
playback.
Constifying "struct snd_soc_tplg_ops" moves some data to a read-only
section, so increase overall security.
On a x86_64, with allmodconfig:
Before:
text data bss dec hex filename
19942 832 0 20774 5126 sound/soc/qcom/qdsp6/topology.o
After:
text data bss dec hex filename
20102 652 0 20754 5112 sound/soc/qcom/qdsp6/topology.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/a5ae843dd8aaacbc1148aea7a3b1d03f11495872.1715526069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
When constructing packets to DSP, the Audioreach code uses 'struct
audioreach_module_config' to configure parameters like number of
channels, bitrate, sample rate etc, but uses defaults for the channel
mapping.
Rework this code to copy the channel mapping from 'struct
audioreach_module_config', instead of using the default. This requires
all callers to fill that structure: add missing initialization of
channel mapping.
Entire patch makes code more logical and easier to follow:
1. q6apm-dai and q6apm-lpass-dais code which allocates 'struct
audioreach_module_config' initializes it fully, so fills both
the number of channels and the channel mapping.
2. Audioreach code, which uses 'struct audioreach_module_config' when
constructing packets, copies entire contents of passed config, not
only pieces of it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-3-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The set_channel_map() implementation in q6apm-lpass-dais driver was
copying older pre-Audioreach code from q6afe-dai driver, but not really
using it. The code sets active channel mask based on passed channel
mapping, but Audioreach code does not use that mask ever. Audioreach
module configuration does have on the other hand proper channel mapping
field, which should supersed that active channel mask.
Drop the unused active channel mask and implement proper mapping of
channels in q6apm-lpass-dais driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-2-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need for implementations of DAI set_channel_map() to modify
contents of passed arrays with actual channel mapping. Additionally,
the caller keeps full ownership of the array.
Constify these pointer arguments so the code will be safer and easier to
read (documenting the caller's ownership).
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240520-asoc-x1e80100-4-channel-mapping-v4-1-f657159b4aad@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-21-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Static 'struct snd_pcm_hardware' is not modified by few drivers and its
copy is passed to the core, so it can be made const for increased code
safety.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Do not open-code snd_soc_substream_to_rtd() when accessing
snd_pcm_substream->private_data. This makes code more consistent with
rest of ASoC and allows in the future to move the field to any other
place or add additional checks in snd_soc_substream_to_rtd().
clang-16 points out a mismatch in function types that was hidden
by a typecast:
sound/soc/qcom/qdsp6/q6apm-dai.c:355:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
355 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler, prtd, graph_id);
sound/soc/qcom/qdsp6/q6apm-dai.c:499:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
499 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler_compr, prtd, graph_id);
The only difference here is the 'payload' argument, which is not even
used in this function, so just fix its type and remove the cast.
Fixes: 88b60bf047 ("ASoC: q6dsp: q6apm-dai: Add open/free compress DAI callbacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240213101105.459402-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix few trivial code style issues, pointed out by checkpatch, so they do
not get copied to new code (when old code is used as template):
WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6 ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
WARNING: function definition argument 'struct platform_device *' should also have an identifier name
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
WARNING: Missing a blank line after declarations
WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231204100048.211800-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support four channel streams. Map channel 3 and 4 to left/right
surround ("quad(side)" from ffmpeg standard channel list) to match what
is in qdsp6/q6dsp-common.c driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231130180758.212172-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move code assigning channel mapping values to a common helper function.
This simplifies three out of four cases, with the last case using
incompatible type (uint16_t array instead of uint8_t array).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231130180758.212172-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using the params_channels() helper when setting hw_params, results in
passing to Audioreach minimum number of channels valid for given
hardware. This is not valid for any hardware which sets minimum
channels to two and maximum to something bigger, like four channels.
Instead pass the maximum number of supported channels to allow playback
of multi-channel formats.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231017161429.431663-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Rob Herring <robh@kernel.org>:
This is a series is part of ongoing clean-ups related to device
matching and DT related implicit includes. Essentially of_device.h has
a bunch of implicit includes and generally isn't needed any nore except
for of_match_device(). As we also generally want to get rid of
of_match_device() as well, I've done that so we're not updating the
includes twice.
Move the includes of binding headers from Qualcomm SoC sound drivers
headers to unit files actually using these bindings. This reduces the
amount of work for C preprocessor and makes usage of bindings easier to
follow. No impact expected on the final binaries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231005075250.88159-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8cgqnjc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
