In commit 32c9c06adb ("ASoC: mediatek: disable buffer pre-allocation")
buffer pre-allocation was disabled to accommodate newer platforms that
have a limited reserved memory region for the audio frontend.
Turns out disabling pre-allocation across the board impacts platforms
that don't have this reserved memory region. Buffer allocation failures
have been observed on MT8173 and MT8183 based Chromebooks under low
memory conditions, which results in no audio playback for the user.
Since some MediaTek platforms already have dedicated reserved memory
pools for the audio frontend, the plan is to enable this for all of
them. This requires device tree changes. As a fallback, reinstate the
original policy of pre-allocating audio buffers at probe time of the
reserved memory pool cannot be found or used.
This patch covers the MT8173, MT8183, MT8186 and MT8192 platforms for
now, the reason being that existing MediaTek platform drivers that
supported reserved memory were all platforms that mainly supported
ChromeOS, and is also the set of devices that I can verify.
Fixes: 32c9c06adb ("ASoC: mediatek: disable buffer pre-allocation")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-69-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
mt8186_afe_resume_clock() and mt8186_afe_suspend_clock() were
added in 2022 by
commit 55b423d562 ("ASoC: mediatek: mt8186: support audio clock control
in platform driver")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250206014028.237423-1-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-17-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Copy the few differences from mt8186-mt6166-da7219-max98357 in the
mt8186-mt6366-rt1019-rt5682s driver to greatly reduce code duplication;
since now the driver is meant to support MT8186 with the MT6366 PMIC
codec and various combinations of I2S codecs, rename the driver to
mt8186-mt6366 for consistency with MT8195 and MT8188, and rename
the configuration option to SND_SOC_MT8186_MT6366.
Since right now there is no machine using the da7219-max98357 yet, the
snd_soc_dapm_route array was omitted as it's now possible to specify
the audio routing in device trees instead.
While at it, also add the missing sentinel comment to the last entry
of the of_device_id array.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-14-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both the enumerations for UL/DL rates, delay data and the functions
adda_{dl,ul}_rate_transform were duplicated for each MediaTek SoC
dai-adda driver: move the common bits to a new mtk-dai-adda-common
file and its header.
While at it, also add the "mtk_" prefix to the exported functions.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240313110147.1267793-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero.
Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets`
would try to read the register at offset zero when trying to get the power
status of this widget, which is incorrect.
Fixes: b65c466220 ("ASoC: mediatek: mt8186: support adda in platform driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231229114342.195867-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Property 'playback-codecs' is referenced as 'speaker-codec' in the error
message, and this can lead to confusion.
Correct the error message such that the correct property name is
referenced.
Fixes: 0da16e370d ("ASoC: mediatek: mt8186: add machine driver with mt6366, rt1019 and rt5682s")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231031103139.77395-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231023095428.166563-14-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two occurrences where variable tdm_con is being initialized
to zero and the next statement re-assigns tdm_con to a new value. The
initializations are redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231023151704.670240-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To use RT5650 as the codec and the amp, add a new
sound card named mt8186_rt5650.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20231019100322.25425-3-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Rob Herring <robh@kernel.org>:
This is a series is part of ongoing clean-ups related to device
matching and DT related implicit includes. Essentially of_device.h has
a bunch of implicit includes and generally isn't needed any nore except
for of_match_device(). As we also generally want to get rid of
of_match_device() as well, I've done that so we're not updating the
includes twice.
This driver includes the legacy GPIO header <linux/gpio.h> but
is not using any symbols from it. AFE has a custom GPIO
implementation that is not using the kernel GPIO framework,
so it need not include it either.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231006-descriptors-asoc-mediatek-v1-7-07fe79f337f5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877codh2qg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 8e98674868 ("ASoC: mediatek: mt8186-da7219: Expose individual
headset jack pins") maps kcontrols for Headphone and Headset Mic jacks
for this driver so that PulseAudio and PipeWire can handle jack
detection events for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-19-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mutex mutex_request_dram has no user.
Remove mutex_request_dram.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230803083908.9DxbPvOK@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series handles a few issues related to the ES8316 audio
codec, discovered while doing some testing on the Rock 5B board.
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When devm runs function in the "remove" path for a device it runs them
in the reverse order. That means that if you have parts of your driver
that aren't using devm or are using "roll your own" devm w/
devm_add_action_or_reset() you need to keep that in mind.
The mt8186 audio driver didn't quite get this right. Specifically, in
mt8186_init_clock() it called mt8186_audsys_clk_register() and then
went on to call a bunch of other devm function. The caller of
mt8186_init_clock() used devm_add_action_or_reset() to call
mt8186_deinit_clock() but, because of the intervening devm functions,
the order was wrong.
Specifically at probe time, the order was:
1. mt8186_audsys_clk_register()
2. afe_priv->clk = devm_kcalloc(...)
3. afe_priv->clk[i] = devm_clk_get(...)
At remove time, the order (which should have been 3, 2, 1) was:
1. mt8186_audsys_clk_unregister()
3. Free all of afe_priv->clk[i]
2. Free afe_priv->clk
The above seemed to be causing a use-after-free. Luckily, it's easy to
fix this by simply using devm more correctly. Let's move the
devm_add_action_or_reset() to the right place. In addition to fixing
the use-after-free, code inspection shows that this fixes a leak
(missing call to mt8186_audsys_clk_unregister()) that would have
happened if any of the syscon_regmap_lookup_by_phandle() calls in
mt8186_init_clock() had failed.
Fixes: 55b423d562 ("ASoC: mediatek: mt8186: support audio clock control in platform driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org
Link: https://lore.kernel.org/r/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid
Signed-off-by: Mark Brown <broonie@kernel.org
smatch reports
sound/soc/mediatek/mt8186/mt8186-afe-gpio.c:14:16: warning: symbol
'aud_pinctrl' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230407115553.1968111-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are many log messages scattered throughout the mt8186 sound
drivers, and they are frequently triggered.
To avoid spamming the console, move these messages to the debug level.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230329080418.1100-1-allen-kh.cheng@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has many helper function.
This patch use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/87sffrea3z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function primary_codec_init() should return 0 if dmic_sel is null.
Here is the warning message reported by 0-DAY CI Kernel Test Service.
smatch warnings:
primary_codec_init() warn: missing error code? 'ret'
...
2022-11-02 141 if (!priv->dmic_sel) {
2022-11-02 142 dev_info(card->dev, "dmic_sel is null\n");
2022-11-02 @143 return ret;
return -EIVNAL;? return 0;?
2022-11-02 144 }
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Link: https://lore.kernel.org/r/20230107175933.12973-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In mt8186 platform, I2S2 should be the main I2S port that provide
the clock, on the contrary I2S3 should be the second I2S port that
use this clock.
Fixes: 9986bdaee4 ("ASoC: mediatek: mt8186: Configure shared clocks")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221124023050.4470-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Goal of the series is to drop any usage of the internal function.
First, update all users to utilize component->set_jack() and then remove
the relevant EXPORT_SYMBOL_GPL.
Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-8-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221107160437.740353-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having two DMICs, a front DMIC and a Rear DMIC,
but only host audio input AUX port0 is used for these two Dmics.
A "dmic-gpios" property is used for a mixer control to switch
the dmic signal source between the Front and Rear Dmic.
Refer to this one as an example,
commit 3cfbf07c6d
("ASoC: qcom: sc7180: Modify machine driver for 2mic")
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221102125936.2176748-3-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are some spelling mistakes in dev_err messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220928220417.66799-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8186-rt5682 driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DAPM widgets for headphones and headset microphone, with matching
switches, to allow toggling these paths based on the jack connection
status.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-6-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The da7219 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8186-da7219 driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-5-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DAPM widgets for headphones and headset microphone, with matching
switches, to allow toggling these paths based on the jack connection
status.
Note that differently from others (mt8192, mt8195 and mt8186-rt5682),
the widget here is named "Headphones" (with an 's'), since "Headphone
Switch" was already registered by da7219.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the clock sharing for i2s ports can be configured from the
sound machine driver, remove the logic that was used to parse the
properties from the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-11-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i2s0 and i2s1 are paired input/output connected to the same codec and
should share the same clock. Likewise for i2s2 and i2s3. Set the clock
sharing for each pair during the codec's initialization.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-10-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new function to configure the shared clock between two i2s ports,
and export it. This will allow the clock sharing to be set from the
machine driver instead of the devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220908161154.648557-9-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The field 'topology_shortname' in 'snd_soc_card' is defined as char[32],
Current card name will be truncated when SOF is enabled, so rename the
sound card name.
Signed-off-by: chunxu.li <chunxu.li@mediatek.com>
Link: https://lore.kernel.org/r/20220823090735.12176-1-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the first DMIC recording is power down, mtkaif_dmic will be reset.
This will cause configuration error in the second DMIC recording. So do
not reset mtkaif_dmic except in "MTKAIF_DMIC Switch" kcontrol.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/20220820071925.13557-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
