Add support for boards with four ALC1011 amplifiers. Configuration is
copied from cml_rt1011_rt5682 machine driver for backward
compatibility with existing cml devices.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config mtl_da7219_def to da7219 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other rpl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other adl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes a confusion between speakers and amplifiers.
The existing code keeps track of the number of amplifiers and reports
it in the 'cfg-amp' component string.
The number of speakers is defined with quirks, but those quirks are
not consistently added: in the MeteorLake case, none of the supported
platforms used such a quirk, and UCM does not use the values reported
anyways. The notion of 'FOUR_SPEAKERS' is also obsolete now with some
platforms having more than four speakers.
Let's just remove all this and only report the number of amplifiers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initialize "is_legacy_cpu" to false to prevent an uninitialized variable
bug.
Fixes: 8efcd48646 ("ASoC: Intel: sof_rt5682: use common module for sof_card_private initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/6e16433f-1897-46a2-b3ee-e177e7d846b8@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
The Asus T100TA quirk has been using an exact match on a product-name of
"T100TA" but there are also T100TAM variants with a slightly higher
clocked CPU and a metal backside which need the same quirk.
Sort the existing T100TA (stereo speakers) below the more specific
T100TAF (mono speaker) quirk and switch from exact matching to
substring matching so that the T100TA quirk will also match on
the T100TAM models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Set of changes targeting the avs-driver only. No new features, patchset
either fixes or fortifies existing code.
Patchset starts off with a fix for debugbility on ICL+ platforms which I
have forgotten to fixup when providing support for these initially.
The next two address copier module initialization, most importantly,
silence the gcc 'field-spanning write' false-positive.
The following four:
6/13 ASoC: Intel: avs: Replace risky functions with safer variants
7/13 ASoC: Intel: avs: Fix potential integer overflow
8/13 ASoC: Intel: avs: Test result of avs_get_module_entry()
9/13 ASoC: Intel: avs: Remove dead code
address problems found out by Coverity static analysis tool.
The last two worth mentioning are: recommendation from the firmware team
to wake subsystem from D0ix when starting any pipeline -and- shielding
against invalid period/buffer sizes. Audio format shall be taken into
consideration when calculating either of these.
Amadeusz Sławiński (2):
ASoC: Intel: avs: Restore stream decoupling on prepare
ASoC: Intel: avs: Add assert_static to guarantee ABI sizes
Cezary Rojewski (11):
ASoC: Intel: avs: Fix debug-slot offset calculation
ASoC: Intel: avs: Silence false-positive memcpy() warnings
ASoC: Intel: avs: Fix config_length for config-less copiers
ASoC: Intel: avs: Fix ASRC module initialization
ASoC: Intel: avs: Replace risky functions with safer variants
ASoC: Intel: avs: Fix potential integer overflow
ASoC: Intel: avs: Test result of avs_get_module_entry()
ASoC: Intel: avs: Remove dead code
ASoC: Intel: avs: Wake from D0ix when starting streaming
ASoC: Intel: avs: Init debugfs before booting firmware
ASoC: Intel: avs: Rule invalid buffer and period sizes out
sound/soc/intel/avs/avs.h | 1 +
sound/soc/intel/avs/cldma.c | 2 +-
sound/soc/intel/avs/core.c | 4 +--
sound/soc/intel/avs/icl.c | 12 ++++++---
sound/soc/intel/avs/loader.c | 6 +++--
sound/soc/intel/avs/messages.h | 47 ++++++++++++++++++++++++++++++++--
sound/soc/intel/avs/path.c | 13 ++++------
sound/soc/intel/avs/pcm.c | 34 +++++++++++++++++++++++-
sound/soc/intel/avs/probes.c | 14 ++++++----
9 files changed, 109 insertions(+), 24 deletions(-)
--
2.25.1
While HDAudio controller supports buffer packets up to 128 bytes low,
audio format shall be taken into consideration when calculating buffer
and period sizes to avoid undesired xruns.
As *_size in ALSA terms means frames (channels times bit-depth-bytes),
hw_rules can calculate minimal buffer and period sizes solely from
sample rate and the number of milliseconds commonly used on the
AudioDSP firmware side.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to make sure that IPC interface is stable use assert_static to
check union and struct sizes that describe communication interface.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When bringing up setups it's vital to have access to debug functionality
even if firmware boot fails. As order of probe()ing operations is
changed, update remove() procedure accordingly.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While PROBE_MOD_UUID is always part of the base AudioDSP firmware
manifest, from maintenance point of view it is better to check the
result.
Fixes: dab8d000e2 ("ASoC: Intel: avs: Add data probing requests")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While stream_tag for CLDMA on SKL-based platforms is always 1, function
hda_cldma_setup() uses AZX_SD_CTL_STRM() macro which does:
stream_tag << 20
what combined with stream_tag type of 'unsigned int' generates a
potential overflow issue. Update the field type to fix that.
Fixes: 45864e49a0 ("ASoC: Intel: avs: Implement CLDMA transfer")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASRC module configuration consists of several reserved fields. Zero
them out when initializing the module to avoid sending invalid data.
Fixes: 274d79e518 ("ASoC: Intel: avs: Configure modules according to their type")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Copier's config_length shall always be at least one even if there is no
configuration payload to carry. While the firmware treats
config_length=0 or 1 in the same manner, the driver shall initialize the
module properly.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") enforced
strict flex array declarations. This generates false-positive in form of:
"memcpy: detected field-spanning write". Avoid it by utilizing the
DECLARE_FLEX_ARRAY() macro.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
This patchset impacts UAPI.
The only known users of the soc-topology ABI v4 are Chromebook
configurations. Starting from kernel v5.4, all of them are making use of
soc-topology ABI v5. The patchset first removes obsolete code from the
Intel's skylake-driver - the driver of choice for the mentioned
Chromebooks - and then proceeds with removal of relevant soc-topology.c
and uapi bits.
Cezary Rojewski (4):
ASoC: Intel: Skylake: Remove soc-topology ABI v4 support
ASoC: topology: Remove ABI v4 support
ASoC: topology: Cleanup after ABI v4 support removal
ASoC: topology: Remove obsolete ABI v4 structs
include/uapi/sound/asoc.h | 56 ------
include/uapi/sound/skl-tplg-interface.h | 74 --------
sound/soc/intel/skylake/skl-topology.c | 169 -----------------
sound/soc/soc-topology.c | 241 ++----------------------
4 files changed, 18 insertions(+), 522 deletions(-)
--
2.25.1
The only known users are Chromebook configurations. Starting from
kernel v5.4, all of them are making use of soc-topology ABI v5.
Cc: Curtis Malainey <cujomalainey@chromium.org>
Cc: Łukasz Majczak <lmajczak@google.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240403091629.647267-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
probing_link is passed to devm_kmemdup, and is never modified, may as
well mark it const.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/20240403093145.3375857-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW name is constant and we just duplicate it, use const variant of
devm_kstrdup to possibly save a bit of memory.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/20240403093145.3375857-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDA codec name is constant and we just duplicate it, use const variant
of devm_kstrdup to possibly save a bit of memory.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/20240403093145.3375857-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config mtl_cs42l42_def to cs42l42 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config rpl_cs42l42_def to cs42l42 machine driver for all
rpl boards using default SSP port allocation (headphone codec on SSP0,
speaker amplifiers on SSP1, and BT offload on SSP2).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all cs42l42 boards
with/without speaker amplifier. All other adl_cs42l42_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce "adl_cs42l42_def" for adl boards which implement headphone
codec on SSP0 and speaker amplifiers on SSP1.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two common entries in enumeration table for all rt5682/rt5650
boards with/without speaker amplifier. All other mtl_rt5682_def
entries become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two common entries in enumeration table for all rt5682/rt5650
boards with/without speaker amplifier. All other rpl_rt5682_def
entries become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two common entries in enumeration table for all rt5682/rt5650
boards with/without speaker amplifier. All other adl_rt5682_def
entries become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all rt5682 boards
with/without speaker amplifier. All other tgl_rt5682_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config mtl_nau8825_def to nau8825 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all nau8825 boards
with/without speaker amplifier. All other rpl_nau8825_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all nau8825 boards
with/without speaker amplifier. All other adl_nau8825_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions to get tplg suffix string for specific headphone
codec or speaker amplifier. The string could be used to compose the
default topology file name for specific headphone codec and speaker
amplifier combination.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving all code to snd-soc-acpi-intel-match module and remove the
snd-soc-acpi-intel-ssp-common module.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As we applied new naming convention to functions and structures,
changing module name as well to reflect the new naming.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As we moved ssp-common files to new locations with new names, changing
the naming convention from sof_ssp_ to snd_soc_acpi_intel_.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving ssp-common header file from sound/soc/intel/common directory to
include/sound directory and rename the file. Keep file content
unchanged for tracking purpose.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving ssp-common source and header files from sound/soc/intel/boards
directory to sound/soc/intel/common directory and rename the source
file. Keep file content unchanged for tracking purpose.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the optional speaker output on the cs42l43, this uses
the new SOF_CODEC_SPKR quirk to conditional include the speaker DAI
link. It is worth noting that currently no systems are included that
utilise this feature, but the feature is added as several systems are on
the horizon. As part of this SOF_SDW_MAX_DAI_NUM must be increased, it
is currently 3 but cs42l43 will now have 4 DAI links. This value is
increased to 8 to give some head room for future devices.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-35-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some codecs have speaker drivers that may or may not be used in a
given system. Add a quirk (SOF_CODEC_SPKR) that defines if a system
uses the codec speaker, this is kept generic such that any codec
with such a speaker DAI can reuse the quirk.
For implementation of this, add a quirk field into the
sof_sdw_dai_info structure. This field is not used to specify
if a system uses a particular quirk, that is still done through
the sof_sdw_quirk variable, this field is used to flag a DAI as
conditional on a certain quirk. This means the DAI will only be
included in the card if sof_sdw_quirk and the DAI quirk field have
a matching set bit.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-34-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to pass the snd_soc_acpi_link_adr structure to the init
functions, it conveys no specific information about the codec. Remove
this parameter from the callbacks
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-32-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As rt715-sdca dai name has been changed in codec driver, we should
change it in machine driver, too. Changing the dai name in
codec_info_list[] also help sof_sdw_rtd_init() to run .rtd_init()
from the same codec.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-30-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rt_dmic_rtd_init() can be used for rt722 dmic, too.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-28-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add rt722 into rt_sdca_jack_rtd_init() supported list, and set
rtd_init callback directly in codec_info_list[]. No need to use a
init callback to set the rtd_init callback.
Besides, sof_sdw_rt_sdca_jack_init() doesn't set .rtd_init anymore.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-27-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only thing that the rt_xxx_rtd_init() functions do is to set
card->components. And we can set card->components with name_prefix
as rt712_sdca_dmic_rtd_init() does.
And sof_sdw_rtd_init() will always select the first dai with the
given dai->name from codec_info_list[]. Unfortunately, we have
different codecs with the same dai name. For example, dai name of
rt715 and rt715-sdca are both "rt715-aif2". Using a generic rtd_init
allow sof_sdw_rtd_init() run the rtd_init() callback from a similar
codec dai.
Fixes: 8266c73126 ("ASoC: Intel: sof_sdw: add common sdw dai link init")
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Factor out the creation of the SoundWire DAI links into a helper
function. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only part left using the old parsing code is now the generation of
the actual DAI links. Move this generation over to being based on the
new parsing, which allows the removal of the last of the old parsing
code.
The new DAI link generation is a simple matter of creating a new DAI
link for each sof_sdw_dailink struct, and adding a cpu, a codec, and
a mapping for each sof_sdw_endpoint contained in that sof_sdw_dailink.
Note that the CPUs can be inferred as the endpoint list is iterated,
because the endpoints were added into the list sorted by link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
append_dai_type should be set to true in any situation that would
result in multiple DAI links existing on a single SoundWire bus,
because the legacy naming used only the bus number to make things
unique. The current code handles this by looking for codecs with
multiple dai_info structs and looking for buses that include multiple
types of device on them. The first of these assumes that all DAIs on a
given device would be in use. The second, with dissimilar aggregation
now being supported, isn't really an accurate check either since those
devices could be aggregated into a single DAI link.
Move the handling for this flag over to the new parsing code and
simplify things a little by looking directly for SoundWire links
that will contain multiple DAI links to set the flag. These changes
should not cause any change in behaviour for any currently supported
systems.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Trivial move of the handling of ignore_pch_dmic over to the new parsing
code.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the output of the new snd_soc_acpi struct parsing for the purposes
of counting the number of SoundWire DAI links and physical devices
attached to the SoundWire. These counts are already returned by the
parser so those can just be used directly. But the population of the
codec_conf structures, is moved from the old parsing code over to the
new. As the two parsers currently co-exist it is better to not have
them both attempt to modify the same structures.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current machine driver code has a lot of loops parsing through
the ACPI structs (snd_soc_acpi_link_adr, snd_soc_acpi_adr_device,
snd_soc_acpi_endpoint), this makes it hard to understand exactly
what information is being extracted and for what purposes. As well
as being slightly inefficient, as the same information is looked
up multiple times. There are also some issues with the handling
of multiple endpoints on a single device, only the first of the
snd_soc_acpi_endpoint structures is currently fully processed by the
driver. This means doing things like aggregating the second endpoint
on a device with another device are not currently possible.
Add new parsing code that will count the devices and endpoints, parse
them into an intermediate datastructure, and then use that to create
the DAI links. This patch does not actually utilise the results of
the parsing, items will be moved across in the following patches.
This parsing is based around two new structures which are temporarily
allocated whilst parsing. Firstly, sof_sdw_endpoint, which represents
a specific endpoint for audio on a device and is more or less directly
equivalent to snd_soc_acpi_endpoint. Secondly, sof_sdw_dailink
which represents a DAI link and contains a linked list of one or
more sof_sdw_endpoints. A single trip through the snd_soc_acpi data
structures is used to populate these.
One important point to note here is the use of the num field in
snd_soc_acpi_endpoint to address sof_sdw_dai_info array in the
sof_sdw_codec_info struct. This expects a one to one mapping between
endpoints on a device and dai infos. It would be fine for a specific
system to not specify an endpoint for all of the dai infos available,
but two endpoints mapping to the same dai info would make not sense.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the cs42l43 just specifies a single endpoint, as the current
machine driver only looks at the first endpoint specified. Future
refactoring will process all endpoints, as such proper specification
should be added for all the cs42l43 endpoints.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF_SDW_NO_AGGREGATION quirk is mostly for debug and no longer works
correctly with the current state of the machine driver. Remove it from
the code and add an error message if someone uses it.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding rt711 sdca codec support for arl boards.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for future refactoring pull out a helper specifically for
generating the codec name.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Factor out the creation of the BlueTooth DAI links into a helper
function. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Factor out the creation of the HDMI DAI links into a helper function.
No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Factor out the creation of the DMIC DAI links into a helper function.
No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Factor out the creation of the SSP DAI links into a helper function. No
functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rather than open coding a loop to process each bit use for_each_set_bit.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rather than passing around a pointer to the dai_link array and
an index into this array, simply pass a pointer to the current
dai_link. Also move the DAI link pointer sanity check to the end
of the DAI link creation, and change it to a warn on. This check
should only be hit if there is a serious bug in the machine driver,
so checking it on each iteration is excessive.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the flags ignore_pch_dmic and append_dai_type into the drivers
private structure rather than passing them around between functions.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently sof_sdw relies on sof_board_helpers to provide
get_codec_dai_by_name(), but that is the only function from
sof_board_helpers it uses and no other machine driver requires
that function. There is no reason for sof_sdw to select SSP_COMMON
but more and more functions in sof_board_helpers are gaining
dependencies on functions that would require stubs for sof_sdw to
build without it. Firstly it was sof_ssp_get_codec_name(), as was
fixed in commit c1469c3a8a ("ASoC: Intel: ssp-common: Add stub for
sof_ssp_get_codec_name"), now it is:
ERROR: modpost: "sof_ssp_detect_amp_type"
[sound/soc/intel/boards/snd-soc-intel-sof-board-helpers.ko] undefined!
ERROR: modpost: "sof_ssp_detect_codec_type"
[sound/soc/intel/boards/snd-soc-intel-sof-board-helpers.ko] undefined!
Rather than adding more stubs, simply move the affected function
to the sof_sdw machine driver itself and no longer select
SND_SOC_INTEL_SOF_BOARD_HELPERS at all. This should allow work on
SSP_COMMON to progress without affecting sof_sdw.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code evenly distributes the CODEC DAIs across the CPU
DAIs in the DAI link, but this is just an assumption about how the
devices are connected to the host. All the information about which
CODEC is connected to which CPU DAI is contained in the endpoints
datastructures and those structures are already parsed to work out
which CODECs to include in the DAI link. Simply fill in the mapping
from CPUs -> CODECs as we parse through the endpoints structures,
this will ensure that mapping matches the physical layout.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rather than passing around a pointer to the codec_conf array, an index
into it and a size, simply pass around a pointer to the current codec_conf.
This reduces the amount of state moving around.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rather than returning an index simply return a pointer to the
located codec info, this simplifies all the callers which only
want to access the codec info structure. Also remove the inline
specifier the function is fairly large for an inline function,
let the compiler decide. And move the function such that it is
located with the other find_codec_info_*() functions.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rather than returning an index simply return a pointer to the
located codec info, this simplifies all the callers which only
want to access the codec info structure. Also remove the inline
specifier the function is fairly large for an inline function,
let the compiler decide.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rather than returning an index simply return a pointer to the
located codec info, this simplifies all the callers which only
want to access the codec info structure. Also remove the inline
specifier the function is fairly large for an inline function,
let the compiler decide.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Set of loosely connected patches. Most impactful change is dropping any
permisiveness when snd_soc_dapm_add_routes() fails in soc-topology.c To
do it safely, disable route checks for all skylake-driver boards.
Relevant background:
Since commit daa480bde6 ("ASoC: soc-core: tidyup for
snd_soc_dapm_add_routes()") route checks are no longer permissive. Probe
failures for Intel boards have been partially addressed by commit
a22ae72b86 ("ASoC: soc-core: isable route checks for legacy devices")
and its follow up but only skl_nau88l25_ssm4567.c is patched. The rest
of the boards still need fixing.
After that, removal of copy-pastas found in ssm4567.c and redundant code
in i2s_test.c for avs-boards.
Changes in v2:
- glk_rt5682_max98357a.c and skl_hda_dsp_generic.c now disable route
checks only for the skylake-drvier
- asoc now logs failures of snd_soc_dapm_add_routes() in soc-topology.c
Amadeusz Sławiński (1):
ASoC: Intel: avs: i2s_test: Remove redundant dapm routes
Cezary Rojewski (4):
ASoC: Intel: Disable route checks for Skylake boards
ASoC: topology: Do not ignore route checks when parsing graphs
ASoC: Intel: avs: ssm4567: Do not ignore route checks
ASoC: Intel: avs: ssm4567: Board cleanup
sound/soc/intel/avs/boards/i2s_test.c | 79 -------------------
sound/soc/intel/avs/boards/ssm4567.c | 5 +-
sound/soc/intel/boards/bxt_da7219_max98357a.c | 1 +
sound/soc/intel/boards/bxt_rt298.c | 1 +
sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +
sound/soc/intel/boards/kbl_da7219_max98357a.c | 1 +
sound/soc/intel/boards/kbl_da7219_max98927.c | 4 +
sound/soc/intel/boards/kbl_rt5660.c | 1 +
sound/soc/intel/boards/kbl_rt5663_max98927.c | 2 +
.../intel/boards/kbl_rt5663_rt5514_max98927.c | 1 +
sound/soc/intel/boards/skl_hda_dsp_generic.c | 2 +
.../soc/intel/boards/skl_nau88l25_max98357a.c | 1 +
sound/soc/intel/boards/skl_rt286.c | 1 +
sound/soc/soc-topology.c | 11 ++-
14 files changed, 27 insertions(+), 85 deletions(-)
--
2.25.1
Introduce "cml_rt5682_def" for cml boards which implement headphone
codec on SSP0 and speaker amplifiers on SSP1.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove sof_nau8825 board id and use adl_nau8825_def instead since SSP
port assignment is the same.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove SOF_NUM_IDISP_HDMI(3) from board quirks since the value is 3 if
not defined.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove SOF_NUM_IDISP_HDMI(3) from board quirks since the value is 3 if
not defined.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce "rpl_da7219_def" board to reduce the number of rpl board
configs. This config could support all boards which implement
headphone codec on SSP0 and speaker amplifiers on SSP1.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce "adl_da7219_def" board to reduce the number of jsl board
configs. This config could support all boards which implement
headphone codec on SSP0 and speaker amplifiers on SSP1.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce "jsl_da7219_def" board to reduce the number of jsl board
configs. This config could support all boards which implement
headphone codec on SSP0 and speaker amplifiers on SSP1.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PLL bypass mode requires mclk to be present. However, mclk pin is not
connected in JSL boards. Here we add the SOF_DA7219_MCLK_EN quirk to
improve driver readability.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add exit function to headphone codec dai link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to generate DAI link array and update num_links
field in snd_soc_card structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to initialize sof_card_private structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to initialize sof_card_private structure
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to initialize sof_card_private structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to initialize sof_card_private structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for machine drivers to initialize common part of
sof_card_private structure. Also unify the macros of board quirks for
the initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the quirk in preparation for future changes: common quriks will
be defined and handled in board helper module.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This configuration supports RPL boards which implement DA7219 on SSP0
and MAX98360A on SSP1. DA7219 uses PLL bypass mode to avoid WCLK
locking problem. To use this mode, the MCLK frequency must be 12.288
or 24.576MHz in the topology binary.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there is a helper function to generate entire DAI link array, we
switch individual dai link helpers to static function. No functional
change in this commit.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to generate DAI link array and update num_links
field in snd_soc_card structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an new field link_id_overwrite to sof_card_private structure to
support machine drivers which DAI link ID is fixed number or
discontinue (i.e. no-codec boards). If this field is zero, DAI array
index will be used as link ID. Otherwise the value extracted from
link_id_overwrite will be used.
The field link_id_overwrite is supposed to be initialized by
SOF_LINK_IDS macro like following example.
ctx->link_id_overwrite = SOF_LINK_IDS(HEADPHONE_BE_ID, \
DMIC01_BE_ID, \
DMIC16K_BE_ID, \
IDISP_HDMI_BE_ID, \
SPK_BE_ID, \
BT_OFFLOAD_BE_ID, \
HDMI_IN_BE_ID)
An exception is that, if you use link_order_overwrite to overwrite
DAI link order, then you need to use the same order to build
link_id_overwrite variable as well.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240325221059.206042-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The card-name suffix and the DP-widgets are an unintended copy-paste
from skl_nau88215_ssm4567.c. Both are redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240308090502.2136760-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A copy-paste from intel/boards/skl_nau88l25_ssm4567.c made the avs's
equivalent disable route checks as well. Such behavior is not desired.
Fixes: 69ea14efe9 ("ASoC: Intel: avs: Add ssm4567 machine board")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240308090502.2136760-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Topology files that are propagated to the world and utilized by the
skylake-driver carry shortcomings in their SectionGraphs.
Since commit daa480bde6 ("ASoC: soc-core: tidyup for
snd_soc_dapm_add_routes()") route checks are no longer permissive. Probe
failures for Intel boards have been partially addressed by commit
a22ae72b86 ("ASoC: soc-core: disable route checks for legacy devices")
and its follow up but only skl_nau88l25_ssm4567.c is patched. Fix the
problem for the rest of the boards.
Link: https://lore.kernel.org/all/20200309192744.18380-1-pierre-louis.bossart@linux.intel.com/
Fixes: daa480bde6 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240308090502.2136760-2-cezary.rojewski@intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvE1AACgkQJNaLcl1U
h9B15Qf8CrS5zHsD54bvTcumkDgbJ8Dl9f5qz4UN/AX0mcZ1UJU6sQ0HxIGEtlPc
26pneHV9ZA0wSPw432NBpwcfe7AsWASmKUf6S2hsj4LMvnoj75iiZum8TE71ior7
QI9ARnNipB1tHk7Kmgs/pe+CqX3hhCVqYUI9w5fMIj05T5qwYbqCERws6JA2Uw97
6fb5CgI2uRYTShVVmYsE/FlxXmZqNN4NnNxlVvUSM5TE3Tayf+BCEqhpwuh59Pt/
G+mZfj3eof0HdjGPQbLRPOWQOa3bT8gmT89OlbmmMf17+975pgShBbARzkv41vk1
ifr6muHweaDLD7gloS/HUr4JRo9Daw==
=ZYC5
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
PM constants for PCI devices are defined with bitwise annotation.
When used as is, sparse complains about that:
.../catpt/dsp.c:390:9: warning: restricted pci_power_t degrades to integer
.../catpt/dsp.c:414:9: warning: restricted pci_power_t degrades to integer
Force them to be u32 in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240307163734.3852754-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
intel-mid.h is providing some core parts of the South Complex PM,
which are usually are not used by individual drivers. In particular,
this driver doesn't use it, so simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240305160723.1363534-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDMI codecs which are present and functional from audio perspective lack
i915 support on drm side what results in -ENODEV during the probing
sequence. There is no reason to perform recovery procedure e.g.: reset
the HDAudio controller if this is the case.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240226124432.1203798-4-cezary.rojewski@intel.com
The bios version can differ depending if it is a dual-boot variant of the tablet.
Therefore another DMI match is required.
Signed-off-by: Alban Boyé <alban.boye@protonmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based (cAVS 2.5) e.g.: RPL, inherit most of the functionality
from previous platforms:
SKL <- APL <- CNL <- ICL <- TGL
rather than putting everything into a single file, the platform-specific
bits are split into cnl/icl/tgl.c files instead. Makes the division clear
and code easier to maintain.
Layout of the patchset:
First are two changes combined together address the sound-clipping
problem, present when only one stream is running - specifically one
CAPTURE stream.
Follow up is naming-scheme adjustment for some of the existing functions
what improves code incohesiveness. As existing IPC/IRQ code operates
solely on cAVS 1.5 architecture, it needs no abstraction. The situation
changes when newer platforms come into the picture. Thus the next two
patches abstract the existing IPC/IRQ handlers so that majority of the
common code can be re-used.
The ICCMAX change stands out a bit - the AudioDSP firmware loading
procedure differs on ICL-based platforms (and onwards) and having a
separate commit makes the situation clear to the developers who are
going to support the solution from LTS perspective. For that reason
I decided not to merge it into the commit introducing the icl.c file.
Update board selection with tables specifying supported I2S
configurations. DMIC/HDAudio board selection require no update as
dmic/hdaudio machine boards are generic and not tied to any specific
codec.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For ICL+ platforms to avoid DMI/OPIO L1 entry during the base firmware
load procedure, HW recommends to set LTRP_GB to 95us and start an
additional CAPTURE stream in the background.
Once the load completes, original LTRP_GB value is restored and the
additional stream is released.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define handlers specific to cAVS 2.5 platforms, that is TGL, ADL, RPL
and all other variants based on this very version of AudioDSP
architecture. Most operations are inherited from their predecessors with
the major difference being AudioDSP cores management - firmware handlers
that on its own so there is no need to interfere.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define handlers specific to cAVS 2.0 platforms, that is ICL, JSL and all
other variants based on this very version of AudioDSP architecture. Most
operations are inherited from their predecessors with the major
difference being firmware-logging functionality - IPC request as well as
debug memory windows layout have changed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define handlers specific to cAVS 1.8 platforms, that is CNL, CFL, CML
and all other variants based on this very version of AudioDSP
architecture. Most operations are inherited from their predecessors.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Servicing IPCs on CNL platforms and onward differs from the existing
one. To make room for these, relocate SKL-based platforms specific code
into the skl.c file leaving only the genering irq_handler in the common
code.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Servicing IPCs on CNL platforms and onward differs from the existing
one. To make room for these, enrich platform descriptor with fields
representing crucial IPC registers and utilize them throughout the code.
While cleaning up device descriptors, reduce the number of code lines by
assigning 'min_fw_version' within a single line.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prefix members that are platform-specific with 'avs_' to improve code
cohesiveness and reduce the chance for naming-conflics with other
drivers.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid sound clipping when there just one, single CAPTURE stream
ongoing, disable L1SEN before it is started. Any PLAYBACK stream or
additional CAPTURE allows L1SEN to be re-enabled.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code loading is not the only procedure that manipulates L1SEN. Update
existing mechanism so the stream starting procedure can interfere with
L1SEN without causing any trouble to its other users.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
4 fixes / cleanups to the rt5645 mc driver's codec_name handling:
1. In the for loop looking for the dai_index for the codec, replace
card->dai_link[i] with cht_dailink[i]. The for loop already uses
ARRAY_SIZE(cht_dailink) as bound and card->dai_link is just a pointer to
cht_dailink using card->dai_link only obfuscates that cht_dailink is being
modified directly rather then say a copy of cht_dailink. Using
cht_dailink[i] also makes the code consistent with other machine drivers.
2. Don't set cht_dailink[dai_index].codecs->name in the for loop,
this immediately gets overridden using acpi_dev_name(adev) directly
below the loop.
3. Add a missing break to the loop.
4. Remove the now no longer used (only set, never read) codec_name field
from struct cht_mc_private.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210134400.24913-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 13f58267cd ("ASoC: soc.h: don't create dummy Component
via COMP_DUMMY()") dummy snd_soc_dai_link.codecs entries no longer
have a name set.
This means that when looking for the codec dai_link the machine
driver can no longer unconditionally run strcmp() on
snd_soc_dai_link.codecs[0].name since this may now be NULL.
Add a check for snd_soc_dai_link.codecs[0].name being NULL to all
BYT/CHT machine drivers to avoid NULL pointer dereferences in
their probe() methods.
Fixes: 13f58267cd ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210134400.24913-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The soundwire links do not have their IDs as consecutive numbers, thus
the last link might have lower be_id than the previous one and this
leads to id collision with non SDW links.
For example,
create dai link SDW0-Playback-SimpleJack, id 0
create dai link SDW0-Capture-SmartMic, id 4
create dai link SDW0-Capture-SimpleJack, id 1
create dai link SDW2-Playback-SmartAmp, id 2
create dai link SDW2-Capture-SmartAmp, id 3
create dai link iDisp1, id 4
create dai link iDisp2, id 5
create dai link iDisp3, id 6
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds match table for rt722 multiple
function codec on link 0.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds RT712 support for LNL.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent commits remove a lot of init functions remove their function
prototypes as well.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As this function is now used in sof_board_helpers it requires a build
stub for the case SSP_COMMON is not built in.
Fixes: ba0c7c3287 ("ASoC: Intel: board_helpers: support amp link initialization")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some codec .init callbacks are empty after removing dai_links->init =
xxx_rtd_init;. Remove those callbacks.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we set sdw dai link .init callback in the codec_info_list's
dais.init function. This works fine if all codecs in the dai link are
the same. However, we need to do all the .init stuff for all different
codecs in the dai link if not all codecs in the dai link are the same.
Use a common dai link .init callback to call the new rtd_init callback
in sof_sdw_dai_info{} to do rtd_init for each dai.
Some codec init callback will become empty after this change. They will
be removed in the follow up patch.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper to get codec dai by name.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper to get codec dai by name.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper to get codec dai by name.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper to get codec dai by name.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper to get codec dai by name.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper to get codec dai by name.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we assume the codecs in a dai link are all the same.
So that we get codec dai with snd_soc_rtd_to_codec(rtd, 0) in dai_links
->init callback. However, a link can include different codecs.
For example, a 4 speakers link can consist of rt712 and rt1316.
Therefore, we need to select the codec dai by name in the dai link.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2 amps can be in the same or different dai links. To handle this, the
existing code implements different spk_init functions to add dapm routes
for different amps. However, sof_sdw.c doesn't support non-aggregated
amp any more since it used pre-defined BE id.
With that assumption, combine the spk_init functions together.
This is a preparation of putting different types amps in a single dai
link.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to generate DAI link array and update num_links
field in snd_soc_card structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an new field link_order_overwrite to sof_card_private structure to
support machine drivers which DAI link order is different from the
order used in sof_rt5682 (i.e. GLK boards or no-codec boards).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some dmi quirks are duplicated since codec and amplifier type are
removed from board quirk. Remove redundant quirks.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "mtl_rt5682_def" board to reduce
the number of mtl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "rpl_rt5682_def" board to reduce
the number of rpl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "adl_rt5682_def" board to reduce
the number of adl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "tgl_rt5682_def" board to reduce
the number of tgl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "jsl_rt5682_def" board to reduce
the number of jsl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case TDM is set in topology on SSP0, parser will overwrite vindex
value, because it only checks if port is set. Fix this by checking whole
field value.
Fixes: e6d50e474e ("ASoC: Intel: avs: Improve topology parsing of dynamic strings")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240207112624.2132821-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent changes modified operation-order in the probe() function without
updating its error path accordingly. If snd_hdac_i915_init() exists with
status EPROBE_DEFER the error path must cleanup allocated IRQs before
leaving the scope.
Fixes: 2dddc514b6 ("ASoC: Intel: avs: Move snd_hdac_i915_init to before probe_work.")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240202114901.1002127-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The layout is configured as:
- Link0: CS42L43 Jack and mics (2ch)
- Link2: 2x CS35L56 Speaker (amps 3 and 4, right)
- Link3: 2x CS35L56 Speaker (amps 1 and 2, left)
Corresponding SOF topology:
https://github.com/thesofproject/sof/pull/8773
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Link: https://msgid.link/r/20240123113246.75539-1-mstrozek@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes:
- Lots of ASoC SOF fixes and related reworks
- ASoC TAS codec fixes including DT updates
- A few HD-audio quirks and regression fixes
- Minor fixes for aloop, oxygen and scarlett2 mixer
-----BEGIN PGP SIGNATURE-----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=h9S1
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- Lots of ASoC SOF fixes and related reworks
- ASoC TAS codec fixes including DT updates
- A few HD-audio quirks and regression fixes
- Minor fixes for aloop, oxygen and scarlett2 mixer"
* tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Enable headset mic on Lenovo M70 Gen5
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on HP ZBook
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq2xxx
ASoC: SOF: ipc4-loader: remove the CPC check warnings
ASoC: SOF: ipc4-pcm: remove log message for LLP
ALSA: hda: generic: Remove obsolete call to ledtrig_audio_get
ALSA: scarlett2: Fix yet more -Wformat-truncation warnings
ALSA: hda: Properly setup HDMI stream
ASoC: audio-graph-card2: fix index check on graph_parse_node_multi_nm()
ASoC: SOF: icp3-dtrace: Revert "Fix wrong kfree() usage"
ALSA: oxygen: Fix right channel of capture volume mixer
ALSA: aloop: Introduce a function to get if access is interleaved mode
ASoC: mediatek: sof-common: Add NULL check for normal_link string
ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link
ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing
ASoC: Intel: bxt_rt298: Fix kernel ops due to COMP_DUMMY change
ASoC: Intel: bxt_da7219_max98357a: Fix kernel ops due to COMP_DUMMY change
ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow
ASoC: codecs: rtq9128: Fix PM_RUNTIME usage
ASoC: tas2781: Add tas2563 into driver
...
- Core: add concept of controller_id to deal with clear Controller/Manager
hierarchy
- bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
qcom_swrm_stream_alloc_ports() and setting controller id to hw master id
-----BEGIN PGP SIGNATURE-----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=N74M
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Core: add concept of controller_id to deal with clear Controller /
Manager hierarchy
- bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
qcom_swrm_stream_alloc_ports() and setting controller id to hw master
id
* tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: drop bus freq calculation and set 'max_clk_freq'
soundwire: generic_bandwidth_allocation use bus->params.max_dr_freq
soundwire: qcom: set controller id to hw master id
soundwire: fix initializing sysfs for same devices on different buses
soundwire: bus: introduce controller_id
soundwire: stream: constify sdw_port_config when adding devices
soundwire: qcom: move sconfig in qcom_swrm_stream_alloc_ports() out of critical section
soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWmnFEACgkQJNaLcl1U
h9Dzvgf/RfM1g44TeC/hSX0+qdrL6QYg5wPeMWPtV4xgLqx2oqftU9eIcBLHPz03
N1hdutFFqNTR3W5GiTmyV5mLdgJpZBgkYU5dkhXCrlI7xJ6tV7Wsx86Q9ClSmEBH
Z4ZR2oAmCQIt3swshOBvwYUI6MOcG/zSqDBcRQ6t6d98TOkp2m3PPrjEYqEA2ja9
tyr73WXsdammYXZVYPu9oYoNE2Ef6Io5nkyds1F4irCcx1EXiS95cZjF3/OZ9OPP
iGpzVkXvgwb0Jbq+NsBogydsIsSAu4pyNNcu3P9Xcr1rkNqVwz1X1KYvvnSHDqdw
ZbmU6r83dCUpizpgFA4wv8irNn+aKw==
=Rr9L
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.8-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
The change to avoid dummy components will leave the component name and
dai_name NULL which will cause NULL dereference when trying to access to
it in the machine driver when applying fixups.
Link: https://github.com/thesofproject/linux/pull/4759#issuecomment-1878641868
Fixes: 13f58267cd ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240108094842.28782-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The change to avoid dummy components will leave the component name and
dai_name NULL which will cause NULL dereference when trying to access to
it in the machine driver when applying fixups.
Link: https://github.com/thesofproject/linux/pull/4759#issuecomment-1878641868
Fixes: 13f58267cd ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240108094842.28782-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWbJ5EACgkQJNaLcl1U
h9CZTwf/c8CPwoKABZear8jiQpZLUhFLuGQwSShPYVZ7XPzzTMp9BwVmd40DCnUi
NeSc22t2UgT0H06nx3QK8sKOhrpQoBQVrIajf2AaxD44TJbsOYGGe4pMh1sXKAMF
c0ybp8uRgsjiv2Y++SBXZLexGC11/b8eTFLV1nTK/i2nygGjbfWSJ9s4PpB9V6cA
nZrQ/p+x/ZwaBejFUnvE06M7GHtCD6lxrB9Q1EmWA4RxcW7RNUtIN5gr16HlaMiC
3gix4mg40llhBFF9s4eBjRBNKL2paiejPZwcYkAC8w+SkZ/roXaeN55g0avmDWyW
AN9o096vaEVWKhZ/jdTHmFVf2PV2Iw==
=rbT5
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
Set the card.components string using the new rt5645_components() helper
which returns a components string based on the DMI quirks inside the
rt5645 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-8-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some BYTCR x86 tablets with a rt5640 codec have the left and right channels
of their speakers swapped.
Add a new BYT_RT5640_SWAPPED_SPEAKERS quirk for this which sets
cfg-spk:swapped in the components string to let userspace know
about the swapping so that the UCM profile can configure the mixer
to correct this.
Enable this new quirk on the Medion Lifetab S10346 which has its
speakers swapped.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20231217213221.49424-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20231217213221.49424-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the ALSA prefix for the CS35L56 to "AMPn".
This keeps them consistent with the CS35L56 HDA driver. It also
avoids coding the chip ID into the control name, so that other
Cirrus amps with the same controls can have the same control
names.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 05fe628428 ("ASoC: Intel: soc-acpi-intel-mtl-match: add acpi match table for cdb35l56-eight-c")
Link: https://msgid.link/r/20231205115715.2460386-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hookup the CS35L56 DAPM_OUTPUT widgets to a DAPM_SPK widget so
that there is a complete logical path to a speaker.
There is no particular reason to use multiple speaker widgets.
The CS35L56 are designed to work together as a set so they have
all been connected to a single speaker widget.
Instead of a hardcoded list of codec widget names, the code walks
through all the codecs on the dailink and for every cs35l56 it uses
its name prefix to construct the source end of the route. This adds
a small amount of overhead during probe but has the benefit that it
isn't dependent on every system using the same prefixes.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231205135001.2506070-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'if (!playback)' will not work if the dai is only on capture dai link
or is on more than one playback dai links. Check 'if
(ctx->headset_codec_dev)' instead.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rt_sdca_jack_exit() are used by different codecs, and some of
them use the same dai name.
For example, rt712 and rt713 both use "rt712-sdca-aif1" and
sof_sdw_rt_sdca_jack_exit().
As a result, sof_sdw_rt_sdca_jack_exit() will be called twice by
mc_dailink_exit_loop(). Set ctx->headset_codec_dev = NULL; after
put_device(ctx->headset_codec_dev); to avoid ctx->headset_codec_dev
being put twice.
Fixes: 5360c67046 ("ASoC: Intel: sof_sdw: add rt712 support")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The drv_name in enumeration table for ALC5682I-VS codec does not match
the board id string in machine driver. Modify the entry of "10EC5682"
to enumerate "RTL5682" as well and remove invalid entry.
Fixes: 88b4d77d60 ("ASoC: Intel: glk_rt5682_max98357a: support ALC5682I-VS codec")
Reported-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "rpl_nau8825_def" board to reduce
the number of rpl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "adl_nau8825_def" board to reduce
the number of adl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a test configuration for UpExtreme with Cirrus Logic
CS35L56-EIGHT-C board.
The codec layout is configured as:
- Link3: CS42L43 Jack
- Link0: 2x CS35L56 Speaker (amps 1 and 2)
- Link1: 2x CS35L56 Speaker (amps 7 and 8)
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204135614.2169624-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for querying the same ACPI Device-Specific-Method (DSM) as
Windows uses to determine things like speaker and mic routing.
This avoids the need to add DMI quirks for each new ESS8316 tablet model.
This has been tested on the following devices:
1. Chuwi Hi12 CHT with stereo speakers and IN2-mic-map,
this avoids the need to add a DMI quirk for this model.
2. Nanote UMPC-01 CHT with stereo speakers and IN1-mic-map,
the existing DMI quirk is still necessary because of a bug
in the DSM return values for the speakers (it returns mono).
3. Onda V80 plus CHT with mono speaker and IN1-mic-map,
DSM set quirks match the previously used defaults.
4. GP-electronic T701 BYT with mono speaker and IN2-mic-map,
DSM set quirks match the previously used defaults.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a is_bytcr helper variable to probe().
This is a preparation patch for determining the quirks through querying
the ACPI Device-Specific-Method (DSM) on the codec-device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of adding DMI quirks for each new tablet model which uses
the ESS8316 codec, the plan is to switch to querying the same ACPI
Device-Specific-Method (DSM) as Windows uses to determine things
like speaker and mic routing.
Call the new es83xx_dsm_dump() helper which logs various basic settings
which can be queried through the ACPI DSM method on the codec ACPI device,
this is intended to help with developing a DSM based solution to replace
most DMI quirks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[hdegoede@redhat.com: improve commit message]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
A small update for SDW machine support:
Small fixes for sof_sdw machine driver
Support for rt722
New TGL/MTL and LNL match for new configurations
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
SOF board updates for 6.8 including few small fix and the majority is to add
generic helpers for codec, amp, BT offload, HDMI-In and DAI link generation
among various machine drivers.
Use intel_board module to generate DAI link array and update
num_links field in snd_soc_card structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-28-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to generate DAI link array and update num_links
field in snd_soc_card structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-27-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for machine drivers to initialize dai_link and
num_links of a snd_soc_card structure. Machine driver needs to
initialize sof_card_private structure in driver probe function then
board_helpers module will create entire DAI link array for this board.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-26-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for HDMI-In DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-25-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for HDMI-In DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-24-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for machine drivers to initialize HDMI-In DAI
link.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-23-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use bit mask to handle SSP port number of HDMI-In devices to simplify
the code. No functional change in this patch.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-22-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for BT offload DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-21-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for BT offload DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-20-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for BT offload DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for BT offload DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for machine drivers to initialize BT offload
DAI link.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the parameter 'ssp_codec' of sof_card_dai_links_create() since
it's the port number of speaker amplifier. No functional change in
this commit.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for speaker amplifier DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for speaker amplifier DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for speaker amplifier DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for speaker amplifier DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for machine drivers to initialize speaker
amplifier DAI link. The function will initialize common fields and let
caller to initialize codec-specific fields like codec, init, exit, and
ops fields.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for headphone codec DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for headphone codec DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for headphone codec DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for machine drivers to initialize headphone
codec DAI links. The function will initialize common fields and let
caller to initialize codec-specific fields like codec, init, exit, and
ops fields.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to get codec name string from codec type enum
value.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set codec sysclk could fail and return error, add
error check for it.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
if (!strcmp(codec_dai->component->name, MAX_98373_DEV0_NAME)) and
if (!strcmp(codec_dai->component->name, MAX_98373_DEV1_NAME)) can't be
true at the same time. Add an else to clarify it.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes a dead code problem when calculating BE ID for each
HDMI-In link.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds match table for rt722 codec on link 0.
RT722 is a multi-function codec, three endpoints are
created for its headset, amp and dmic functions.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127133448.18449-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To not expose more than in fact is supported by the codec, update CPU
DAI initialization procedure to rely on codec capabilities instead of
hardcoding them. This includes subformat which is currently ignored.
As capabilities for HDMI streams are initialized on PCM open, leave it
as is for now.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-17-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Eliminate all occurrences of S24_LE within PCM code, both HOST and LINK
side. Replace those with MSBITS subformats to allow for granular
selection when S32_LE is the format of choice.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-16-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To provide option for selecting different bit-per-sample than just the
maximum one, use the new format calculation mechanism.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-14-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To provide option for selecting different bit-per-sample than just the
maximum one, use the new format calculation mechanism.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-12-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
RT722 is a multi-function codec which supports headset,
amp, and dmic functions. Each function provides a DAI
which can be used in different dailinks.
The RT711 supports up to 3 SoundWire lanes, but that
should not have any impact in the machine driver:
the lanes are allocated and controlled by the manager
and bandwidth allocation algorithm.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127133448.18449-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The functions sof_sdw_rt712_sdca_init() and sof_sdw_rt712_sdca_exit()
declared in header file are never implemented and used, remove them.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127133448.18449-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_snd_soc_register_card() can return with
-EPROBE_DEFER and in that case the driver should not print
an error message.
Closes: https://github.com/thesofproject/linux/issues/4668
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20231127133448.18449-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC CPU:Codec = N:M connection is using connection mapping idea,
but it is used for N < M case only. We want to use it for any case.
By this patch, not only N:M connection, but all existing connection
(1:1, 1:N, N:N) will use same connection mapping. Then, because it will
use default mapping, no conversion patch is needed to exising drivers.
More over, CPU:Codec = N:M (N > M) also supported in the same time.
ch_maps array will has CPU/Codec index by this patch.
Image
CPU0 <---> Codec0
CPU1 <-+-> Codec1
CPU2 <-/
ch_map
ch_map[0].cpu = 0 ch_map[0].codec = 0
ch_map[1].cpu = 1 ch_map[1].codec = 1
ch_map[2].cpu = 2 ch_map[2].codec = 1
Link: https://lore.kernel.org/r/87fs6wuszr.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/878r7yqeo4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/87ttpq4f2c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The topology files for SDW devices require HDMI dai links to be present and
this is granted under normal conditions but in case of special use cases
the display (i915) driver might not be enabled due to deny-listing,
booting with nomodeset or just not compiled at all.
This should not block the non HDMI audio to be usable so register the dai
links unconditionally. The code has been prepared for this and in case of
no HDMI audio the link is created with dummy codec.
Closes: https://github.com/thesofproject/linux/issues/4594
Closes: https://github.com/thesofproject/linux/issues/4648
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124032.15946-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the HDMI is not present due to disabled display support
we will use dummy codec and the HDMI routes will refer to non existent
DAPM widgets.
Trim the route list from the HDMI routes to be able to probe the card even
if the HDMI dais are not registered.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124015.15878-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If same devices with same device IDs are present on different soundwire
buses, the probe fails due to conflicting device names and sysfs
entries:
sysfs: cannot create duplicate filename '/bus/soundwire/devices/sdw:0:0217:0204:00:0'
The link ID is 0 for both devices, so they should be differentiated by
the controller ID. Add the controller ID so, the device names and sysfs entries look
like:
sdw:1:0:0217:0204:00:0 -> ../../../devices/platform/soc@0/6ab0000.soundwire-controller/sdw-master-1-0/sdw:1:0:0217:0204:00:0
sdw:3:0:0217:0204:00:0 -> ../../../devices/platform/soc@0/6b10000.soundwire-controller/sdw-master-3-0/sdw:3:0:0217:0204:00:0
[PLB changes: use bus->controller_id instead of bus->id]
Fixes: 7c3cd189b8 ("soundwire: Add Master registration")
Cc: stable@vger.kernel.org
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231017160933.12624-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
skl_platform_register() uses krealloc. When krealloc is fail,
then previous memory is not freed. The leak is also when soc
component registration failed.
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The resources should be freed when function return error.
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231116125150.1436-1-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT5650 is I2S codec integrated with HP and SPK.
The HW board connects SoC I2S to RT5650 codec as below:
I2S0: ALC5650 aif1 for Speaker
I2S2: ALC5650 aif2 for Headphone
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231113115907.18539-1-mac.chiang@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-18-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-17-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-16-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-15-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-14-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-13-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-12-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-11-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-10-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-9-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmU/rAQACgkQJNaLcl1U
h9AXVwf/SwWrxTus3+O2hS5rwusjqQBn1t2mzlnxsYNVCYGBcjOpMGL4HrJzn++e
DJXoMyWis5FNKFWyPtKMGE1kZYdUUE/g7LpZOBew4P47nBv6SQWRvUxPfoq8mdOg
Xb4+kjBzTq1dhwZnZPvNdsknvM7cLfx/lyo2vUJR4peDL0rzgnx72fhRZAjzh2OH
CSz69aTjpliqikp+V7JVFYf2yma2LjTOCL2saiIF/PcxsqUUa73XTggg610EPY+R
pOFb2MBRDbZuJrETbaiytLwtcPuvrpiHRHhxuClsjHGVTDbGfE7GzePS+yUu66y9
LO8oAl7kJebw+WWffIOoL2IjXcG9tA==
=nn11
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.7
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
In order to support Eve chromebooks add rt5514 configuration to board
lookup table. rt5514 is used for capture in DMIC configuration on SSP 0
and TDM 1.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231027110537.2103712-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Hans de Goede <hdegoede@redhat.com>:
Hi Mark,
As requested here is a v2 of my series to add various quirks
to the bytcr_wm5102 Intel board driver to make it more flexible.
Changes in v2:
- Dropped 2 already merged patches
- Rebased on top of broonie/sound/for-6.7
Regards,
Hans
Hans de Goede (4):
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_SSP2 quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_MCLK_19_2MHZ quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_OUT_MAP quirk
ASoC: Intel: bytcr_wm5102: Add BYT_WM5102_IN_MAP quirk
sound/soc/intel/boards/bytcr_wm5102.c | 229 +++++++++++++++++++++++---
1 file changed, 202 insertions(+), 27 deletions(-)
--
2.41.0
Unlike all designs supported sofar the Lenovo Yoga Tab 3 YT3-X90 does not
have its internal microphone (intmic) on IN3L with the headset microphone
on IN1L. Instead this tablet has the intmic on IN1L and the hsmic on IN2L.
Add a BYT_WM5102_IN_MAP quirk mechanism to allow selecting between
different input maps and add support for both setups with the current
settings being the default map.
The new INTMIC_IN1L_HSMIC_IN2L map is enabled by default on CHT because
the Lenovo Yoga Tab 3 YT3-X90 model is the only Cherry Trail design
currently supported. If different CHT designs turn up which need different
input maps we can add DMI quirks to select a different map later.
The userspace UCM profile also needs to know about this so
extend the components string with this info too.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some x86 WM5102 designs don't use the SPK pins for speaker output
instead they use the HPOUT2L + HPOUT2R for the speakers.
Add an BYT_WM5102_OUT_MAP quirk mechanism to allow selecting
between 2 output maps, one for the speakers on the SPK output pins
and one for the speakers on the HPOUT2 pins.
The new HPOUT2 map is enabled by default on CHT because this is used on
the Lenovo Yoga Tab 3 YT3-X90 model which is the only Cherry Trail design
currently supported. If different CHT designs turn up which need different
output maps we can add DMI quirks to select a different map later.
The userspace UCM profile also needs to know about this so
setup a components string with this info too.
While at it also drop the unused "Line Out" route.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Cherry Trail SoC only supports 19200000 as clk-frequency for
the pmc_plt_clk used for the audio codec.
Add a BYT_WM5102_MCLK_19_2MHZ quirk for this and enable this
by default on Cherry Trail SoCs.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the standard intel board file quirk mechanism also used in many
other intel board drivers and add a BYT_WM5102_SSP2 quirk setting
for designs using SSP2 instead of SSP0.
And enable the new BYT_WM5102_SSP2 quirk on Cherry Trail devices
since those always use SSP2.
The logging of the quirks uses dev_info_once() because probe() may run
multiple times because of snd_soc_register_card() returning -EPROBE_DEFER.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android
with a custom kernel as factory OS, does not list the used WM5102 codec
inside its DSDT.
So acpi_dev_get_first_match_dev() is going to fail on this board.
Fallback to using "spi-$(mach->id)" as codec device name in this case
to allow bytcr_wm5102 to work on these tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021211534.114991-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with
a custom kernel as factory OS, does not list the used WM5102 codec inside
its DSDT.
Workaround this with a new snd_soc_acpi_intel_baytrail_machines[] entry
which matches on the SST id instead of the codec id like nocodec does,
combined with using a machine_quirk callback which returns NULL on
other machines to skip the new entry on other machines.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021211534.114991-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUy6X8ACgkQJNaLcl1U
h9Cv7Qf+PO4ucl/rFITWAp2Ta9fw7Z5J6UCiXiR54TPgAiLJrpKSi3rbYTXjO90Y
1NNOdoMKr109zdOpdSZI7EX0GgWQbGbdB40nxESdTcojAloRH0jt4RaF7G7B7+86
b8PGlVPLLV/4zFf9f2gpEKPcKhRRRKYOBIEB+amfjWpdXVrqPD3zS/S16Q3Hn4Gy
Fx9b9X/lVDG9uqJomHpunEdViZjkm5CCNzdyAhHH99afiqSe//pevx6/FpzAHyng
AZgE9Yfq4Xw4pdzDdGVfYC+L1GZiHIDRzsusz6aPA5nrMhSn0ru8PMGtmQQTzyhb
PLYw0OW8cWymfqwal8wrNGJfSZ8IGA==
=lN5P
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.7
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
[ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec
drivers are resolved here -- tiwai ]
Use intel_board module for dmic01 and dmic16k DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for dmic01 and dmic16k DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for dmic01 and dmic16k DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for dmic01 and dmic16k DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add functions for machine drivers to initialize dmic01 and dmic16k DAI
links.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support back to RPL devices that lost audio after the RPL/ADL
split. The hardware configuration is:
SSP0: NAU88L25/NAU88L25YGB codec
SSP1: MAX98360A amplifier
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs42l43 supports 4 hardwired microphones, but only supports up to 2
microphone headsets. Only dataport 1 can support 4 channel capture,
but that is currently used for the headset microphone. Switch things
around such that DP1 is used for the builtin mics and DP2 is used for
the headset microphones.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes sense to report the microphone separately from the headphones,
that way ALSA UCM can differentiate between switching the playback and
the capture. For example, still using the built-in microphone path when
a 3-pole headset is inserted.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functional change, just some trivial whitespace fixups.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When adding CODECs to a DAI link, the code should stop processing more
CODECs when the expected number of CODECs are discovered. This fixes a
small corner case issue introduced when support for different devices
on the same SoundWire link was added. In the case of aggregated
devices everything is fine, as all devices intended for the DAI link
will be marked with the same group and any not intended for that DAI
are skipped by the group check. However for non-aggregated devices the
group check is bypassed and the current code does not stop after it
has found the first device. Meaning if additional non-aggregated devices
are present on the same SoundWire link they will be erroneously added
into the DAI link.
Fix this issue, and provide a small optimisation by ceasing to process
devices once we have reached the required number of devices for the
current DAI link.
Fixes: 317dcdecaf ("ASoC: intel: sof_sdw: Allow different devices on the same link")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that all drivers have moved from modprobe loading to
handling -EPROBE_DEFER, we can remove the argument again.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-14-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we can use -EPROBE_DEFER, it's no longer required to spin off
the snd_hdac_i915_init into a workqueue. It's likely the whole workqueue
can be destroyed, but I don't have the means to test this.
Removing the workqueue would simplify init even further, but is left
as exercise for the reviewer.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-12-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we can use -EPROBE_DEFER, it's no longer required to spin off
the snd_hdac_i915_init into a workqueue. It's likely the whole workqueue
can be destroyed, but I don't have the means to test this.
Removing the workqueue would simplify init even further, but is left
as exercise for the reviewer.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-10-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Xe is a new GPU driver that re-uses the display (and sound) code from
i915. It's no longer possible to load i915, as the GPU can be driven
by the xe driver instead.
The new behavior will return -EPROBE_DEFER, and wait for a compatible
driver to be loaded instead of modprobing i915.
Converting all drivers at the same time is a lot of work, instead we
will convert each user one by one.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-8-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use intel_board module for Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create a new module to host common functions for machine drivers. This
patch supports Intel HDMI DAI link initialization.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sof_hdmi_private structure instead of a link list of sof_hdmi_pcm
structure for HDMI dai link initialization since hdac-hdmi support is
removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common header for Intel HDMI dai link (idisp) initialization.
Declare the sof_hdmi_private structure in machine driver private data
and use it to initialize dai link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove hdac-hdmi support code since we are now using
snd-hda-codec-hdmi codec driver for hdmi.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rt712_sdca is used by rt712 and rt713. Using different
cards->components string allow UCM distinguish the two codecs.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture support for the MTL products which doesn't have
onboard I2S codec. But need to support HDMI-In capture via I2S and
audio playback through HDMI/DP monitor.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current mechanism replaces "%d" present in some routes and widget names
with SSP number. However there are also configurations which make use of
TDM number, in which case expected behavior would be to have string in
form of SSP:TDM - see implementation of avs_i2s_platform_register() in
sound/soc/intel/avs/pcm.c.
Implement custom function, which parses string and make use of it when
parsing topology. While at it make sure that we generate dynamic names
only if there is no multiple SSPs or TDMs defined.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231012083514.492626-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In quite a few places in code there are checks for number of SSPs
present on system, to reduce maintenance burden introduce helper
functions allowing to get SSP and TDM from machine board configuration.
Additionally in boards we use SSP and TDM to generate quite a few
strings, it could be done like:
if (tdms)
dl->name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d:%d-Codec",
ssp_port, tdm_slot);
else
dl->name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d-Codec",
ssp_port);
but quite quickly code ends up with spaghetti of similar if elses.
Instead introduce macro which can be used to generate correct string,
allowing to minimize code to something like:
dl->name = devm_kasprintf(dev, GFP_KERNEL, AVS_STRING_FMT("SSP", "-Codec",
ssp_port, tdm_slot));
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231012083514.492626-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using TDM configuration some other device may be using SSP%d, so
don't create snd_soc_dai_driver configuration for it unless requested
by TDM configuration.
While at it adjust tdf8532 board to explicitly describe TDM
configuration.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231012083514.492626-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-5-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
AudioDSP firmware is the one who kicks SDxFIFOS calculation when a
stream is decoupled mode. During firmware bring up procedure, there is
no firmware running and the code-loading stream is always a decoupled
one. So, there is none to trigger the calculation and we end up with
false-positive timeout (-110) messages.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231006102857.749143-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_ext_host_stream_setup() abstracts the procedure details away.
Simplify the code by using it.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_ext_host_stream_setup() abstracts the procedure details away.
Simplify the code by using it.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230926080623.43927-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDAudio streams are decoupled on startup() and, decoupling them again on
prepare() is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929112436.787058-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When audio controller is passed-through to the guest machine in
virtualized environment, the basefw load will fail the next time guest
OS reboots. Disable the DSP main core before loading the base firmware
to sanitize the environment.
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929112436.787058-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To prevent rmmod and similar behave unexpectedly when invoked on
snd_soc_avs module while the AudioDSP firmware tracing is ongoing,
increase the module refcount until the tracing is stopped.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929112436.787058-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to instantiate modules on the firmware side, the driver sends
payload with module configuration. In some case size of this information
is not known before hand, so driver allocates temporary memory during
module creation and frees it after use. Optimize the flow a bit, by
preallocating maximum buffer. This removes the time spend on allocating
memory, as well as potential OOM errors during module initialization.
Handlers for modules, where configuration data fits on stack, are left
as is.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929112436.787058-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using PAGE_SIZE as base of definitions in headers, use
generic size defines. While x86 platforms use 4096 as page size, there
are platforms which use different page sizes. Two of changed defines are
for memory windows on DSP side, which have fixed size independent of
host side page size. Another one is for CLDMA buffer which also doesn't
need to change with page size.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929112436.787058-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code size can be reduced if avs_dsp_send_xxx_msg()s take responsibility
for dumping logs in case of an IPC message failure. In consequence,
avs_ipc_err() helper is removed.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230929112436.787058-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zg19fo4o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qf4qnfz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDA patch loader is supported by legacy HDA driver. Implement it on
ASoC HDA driver, too.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230919083209.1919921-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Cirrus Logic CS42L43 using SoundWire.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230919020011.1896041-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rule for the SoundWire tables is that the platforms with more
devices need to be added first. We broke that rule with the Dell SKU
0B34, and caused the second amplifier for SKU 0AF3 to be ignored.
The fix is simple, we need to move the single-amplifier entry after
the two-amplifier one.
Fixes: b62a1a839b ("ASoC: Intel: soc-acpi: add tables for Dell SKU 0B34")
Closes: https://github.com/thesofproject/linux/issues/4559
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919083606.1920202-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture via I2S feature support in MTL platform.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919091136.1922253-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support for ES83x6 codec in MTL match table.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230919091136.1922253-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Rather than keeping a single array of CPU dai link components allocate a
smaller one for each DAI link, this reduces the amount of state that
needs to be passed back and forth in the driver.
Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about amplifier type.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-20-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This configuration supports ADL boards which implement DA7219 on SSP0
and MAX98360A on SSP1. DA7219 uses PLL bypass mode to avoid WCLK
locking problem. To use this mode, MCLK frequency must be 12.288 or
24.576MHz.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-19-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use maxim-common module to handle speaker amp DAI link registration.
No functional change in this commit.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-18-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the driver file and kernel option to be consistent with other
SOF machine drivers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-17-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use realtek-common module to support rt1019p speaker amplifier.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-16-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use nuvoton-common module to support nau8318 speaker amplifier.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement nau8318 support code in this common module so it could be
shared between multiple SOF machine drivers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-14-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A BE DAI link for speaker amplifier is always created even a board
quirk specifies there is no amplifier. Modify the driver to check
amplifier type before creating corresponding DAI link.
The topology (sof-tgl-rt1308-hdmi-ssp.m4) which supports HDMI-IN is
using fixed BE ID for each DAI link. Therefore we also uses fixed ID
in machine driver side.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-13-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added HDMI-in capture support for RPL boards. previously it used adl
machines and now its moved into separate match entry.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This configuration supports ADL boards which implement ALC5650 dual
I2S interface codec. Two DAI links are added: AIF1 (on codec side) for
headphone and AIF2 for speakers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For all MTL/Rex devices, number of HDMI supported is 3.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
System firmware has included additional audio DMI string
MAX98360_ALC5682I_DISCRETE_I2S_BT for discrete BT offload
supporting devices. Same DMI string match is introduced
in sof_rt5682_quirk_table.
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about codec and amplifier type.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about codec and amplifier type.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about codec and amplifier type.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use ssp-common module to detect codec and amplifier type in driver
probe function and remove all quirks about codec and amplifier type.
Due to codec detection feature, we could remove HP Dooly's DMI quirk
safely.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use ACPI HID definition in ssp-common header for device name macros.
No functional change here.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create a new common module to host functions which could be shared
among SSP machine drivers. Add functions to detect headphone codec and
speaker amplifier via ACPI system at runtime in order to remove codec
type quirks in machine drivers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove SOF_RT5682_MCLK_24MHZ flag from JSL and CML/WHL board configs
since the information could be retrieved from SOF API. The macro
itself is removed as well.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rather than incrementing the ID for the dai_links in many places
throughout the code, just increment it each time we initialise a new DAI
link.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915075611.1619548-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now only the SoundWire part of the code uses the global cpus array,
remove it and have create_sdw_dailink allocate its own link components.
This removes a lot of state being passed around in the driver, which
simplifies things a fair bit.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915075611.1619548-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code contains a fair amount of state tracking and one part of that
is keeping track of which entry in the large global cpus
snd_soc_dai_link_component array is currently in use. Add a helper
function to allocate a simple DAI link, this simplifies the
code slightly and moves us in the direction of eliminating the need for
the large global cpus array. This does slightly increase the number of
allocations done, but this is probe time and the code already does a
large number of allocations so this increase is small over all.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915075611.1619548-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Whilst it should not cause any issues as only a single instance of the
machine will be instantiated, it is still slightly better practice to
keep working data in the private data structure, rather than a global
variable. Move sdw_pin_index into the mc_private structure.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915075611.1619548-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because of the potential failure of the devm_kstrdup(), the
dl[i].codecs->name could be NULL.
Therefore, we need to check it and return -ENOMEM in order to transfer
the error.
Fixes: 97030a4337 ("ASoC: Intel: avs: Add HDAudio machine board")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230915021344.3078-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
If the PCI SSID has been set in the struct snd_soc_acpi_mach_params,
copy this to struct snd_soc_card so that it can be used by other
ASoC components.
This is important for components that must apply system-specific
configuration.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDA and HDMI devices are simple enough that in case of user not having
topology tailored to their device, they can use fallback topology.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230905093147.1960675-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture support for the RPL products doesn't have onboard
I2S codec.but need to support HDMI-In capture via I2S and audio playback
through HDMI/DP monitor.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231358.78971-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the acpi match table for Dell SKU0C87
devices, the codec layout is:
SDW0: RT714 DMIC
SDW1: RT1318 Speaker
SDW2: RT1318 Speaker
Note that there is no jack codec on SKU0C87 devices.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231358.78971-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture via I2S feature support in RPL platfroms.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231358.78971-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support for ES83x6 codec in RPL match table.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231358.78971-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Boards were using this in older kernels before adl and rpl ids were
split. Add this back to maintain support.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230804085648.3721416-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the first device on a link is not treated specially there is no
need to have a separate loop to handle the current link over the
future links, as the logic is identical. Combine this all into a
single processing loop.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the current code encounters a new type of device on a SoundWire
link, it will abort processing that link and move onto the next
link. However, there is no reason to disallow this setup, it would
appear this was being disallowed to work around issues introduced
by only the first endpoint on each link being checked, which is now
fixed.
The device type shouldn't determine which DAI link it is connected to,
the group ID and aggregation status should.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code checks the first device on a link and assumes
that all the other devices on the link will have the same endpoint
aggregation status and endpoint group ID.
Say for example a system looked like:
SDW0 - Amp 1 (Aggregated, Group 1), Mic 1 (Aggregated, Group 2)
SDW1 - Amp 2 (Aggregated, Group 1), Mic 2 (Aggregated, Group 2)
The current code would create the DAI link for the aggregated amps,
although it is worth noting that the only reason Mic 2 is not added is
the additional check that aborts processing the link when the device
changes. Then when processing the DAI link for the microphones, Mic
2 would not be added, as the check will only be done on the first
device, which would be Amp 2 and thus the wrong group, causing the
whole link to be skipped.
Move the endpoint check to be for each device rather than the first
device on each link.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current loops at the top of create_sdw_dailink process the devices
on each link starting from device index adr_index. But adr_index is only
meaningful on the first on these SoundWire links, as it is the index of
the current device on that link. This means devices will be skipped on
later links.
Say for example the system looks like this:
SDW0 - Codec (Not Aggregated), Amp 1 (Aggregated, Group 1)
SDW1 - Amp 2 (Aggregated, Group 1), Amp 3 (Aggregated, Group 1)
The code should create 2 DAI links, one for the CODEC and one for the
aggregated amps. It will create the DAI link for the codec no problem.
When it creates the DAI link for Group 1 however, create_sdw_dailink
will be called with an adr_index of 1, since that is the index of Amp
1 on SDW0. However, as the loop in create_sdw_dailink moves onto SDW1
it will again start from adr_index, skipping Amp 2. Resulting in the amp
DAI link only have amps 1 and 3 in it.
It is reasonable to start at adr_index on the first link, since
earlier devices have by definition already been processed. However,
update the code when processing later links to handle all devices.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two problems with the current range check on the codec_conf
array.
Firstly, adr_link_next->num_adr refers to the number of devices
on the current SoundWire link, but adr_index refers to the first
SoundWire link involved in the DAI link. This means that subtracting
these two numbers is only meaningful on the first SoundWire link in the
DAI and broken on later links.
Secondly, the intention of the range check is to add the number
of remaining devices on the currently link to the current index
and ensure enough space remains. However, this assumes that all
remaining devices on the SoundWire link will be added to the current
DAI link. Ideally this would not be the case, and devices could be
grouped as the user desired.
Moving the range check into the inner loop both simplifies the code (no
need to add and subtract offsets) and allows future refactoring such
that devices on a single SoundWire link don't have to all be grouped onto
a single DAI link. The check will be processed slightly more often since
it is processed for each device rather each link but this is probe time
and the numbers involved are very small here (4 links, likely no more
than 2-4 devices per link).
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In create_sdw_dailink, rather than bulk updating the index into the
DAI link components array, at the end of processing a link, do so each
time the code adds a new component. This simplifies things slightly,
as an intermediate variable is no longer needed to track the current
place in the DAI link components array.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The loops which fill the codec DAI link component structures are split
across create_sdw_dailink and create_codec_dai_name. This causes the
code to be rather confusing, needing to return out the function to allow
the upper loop to iterate. Remove the create_codec_dai_name helper and
pull its code up into create_sdw_dailink, this makes it more obvious
what is happening in the code. This patch makes no functional change
just hoists the code up a level.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to create a single codec DAI link component
structure. This sets things up for more refactoring of the creating of
the DAI links.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the check for a valid group id into get_dailink_info as
well. This does cause a slight change in behaviour in that the system
will return an error rather than just ignoring the link with an
invalid group id. There are presently no systems with invalid group
ids in mainline and failing seems more appropriate since it will
better highlight the code needs fixing.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As get_dailink_info spins through all the links anyway simply check the
link masks there. This saves an extra check and means the code will
fail earlier if the mask is invalid.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_dailink_info already checked if the adr_link pointer was NULL so
there is no need to recheck later in sof_card_dai_links_create.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing new lines.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset first fixes a number of errors made in the hda-mlink
support, then adds Lunar Lake definitions. The main contribution is
the hda-dai changes where the HDaudio DMA is now used for SSP, DMIC
and SoundWire. In previous hardware the GPDMA (aka DesignWare) was
used and controlled by the audio firmware. The volume of code is
minimized with the abstraction added in previous kernel cycles.
Due to cross-dependencies between ASoC and SoundWire trees, the full
support for jack detection will be deferred to the next kernel
cycle. There's not much point to ask for a sync of the two trees to
support one patch for each tree - we are at -rc5 already.
Experimental results show that the headset is only detected with the
JD2 quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807215000.515846-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2913bb1f68 ("ASoC: Intel: sof_da7219_max98373: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-11-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit b9f53b9fc1 ("ASoC: Intel: kbl_da7219_max98927: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-10-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit c2065d43ae ("ASoC: Intel: kbl_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-9-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit ecd77d494e ("ASoC: Intel: bytcr_wm5102: Add jack detect
support") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The WM5102 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-8-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit bbdd4ea219 ("ASoC: Intel: bxt_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle detection events for
these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-7-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-6-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Lots of small cleanups coming from Bard Liao and Charles Keepax for
SoundWire platforms, and minor additions for RVPs and Chromebooks.
Hoist the handling logic for group_generated up to the
sof_card_dai_links_create level. This avoids the need to pass the array
through multiple levels of functions.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename get_sdw_dailink_info to simply get_dailink_info and have it also
return the number of codecs present. Then hoist the allocation of the
codec conf structure up into sof_card_dai_links_create. This saves an
extra loop through the adr_link array, allows us to get rid of
sof_card_codec_conf_alloc and makes the allocation more explicit.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The counting of each of the types of DAI link is a bit messy with things
added onto an intermediate variable as it goes along. Re-order things a
little to keep the order consistent with the rest of the function and
simplify the process down to a variable for each type of DAI and then
sum them at the end.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add cs35l56 support in sof_sdw machine driver.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for MFD based CODEC drivers, by allowing the CODEC name to
not be the SoundWire device directly.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
create_codec_dai_name() is used to create codec component's information
in different adr links. We can and should break before we do anything.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The amp_num member of the info struct is zeroed at the start of
sof_card_dai_links_create, but then summed in mc_probe after
sof_card_dai_links_create is called. It is a little clearer to hoist the
initialisation out of sof_card_dai_links_create so it is on the same
level as the summation.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull the device and mach struct out of the card rather than explicitly
passing to sof_card_dai_links_create.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shuffle things around to group operations a little more, and
consistently use card->dev.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The address passed to find_codec_part_info should be const.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a return rather than a break and an additional range check.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A module device table is generally preferred over hard coding a
MODULE_ALIAS.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having two local variables called codec_idx and codec_index, that refer
to different things is a little confusing. Rename codec_idx to
codec_dlc_index to indicate it points into the dai_link_component array.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver makes extensive use of both ACPI link and ASoC DAI link
structs, often referring to both with the variable name link. Make the
code a little easier to follow by consistently using adr_link for the
ACPI bits and dai_links for the ASoC bits.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The link_id parameter in create_sdw_dailink is actually the BE link id.
Rename it to be_id to be consistent with the caller and less confusion.
No functionality change.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The capture setting are missing and preventing topologies with
feedback from loading.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just sort Realtek codecs using increasing
part IDs.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For soundwire config, SSP1 is used for BT offload. This is enabled
in sof_sdw_quirk_table
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support for 2 streams of HDMI-In capture via I2S with rt5682s
codec variant
Reviewed-by: CBM <balamurugan.c@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: apoorv <apoorv@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support back to RPL devices that lost audio after the RPL/ADL
split. The hardware configuration is:
SSP0: 10EC5682/RTL5682 codec
SSP2: MAX98357A amplifier
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding RT711 sdca SDW codec support with SDW0 link for RPL RVP platforms
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/intel/atom/ reports a possible
NULL pointer dereference.
sound/soc/intel/atom/sst/sst_stream.c:221:40: error: dereference of
NULL ‘block’ [CWE-476] [-Werror=analyzer-null-dereference]
221 | unsigned char *r = block->data;
This is a false-positive, the GCC analyzer generated that report by
considering if (bytes->block) as true in some cases and false in
others.
We can simplify the code and use a local variable so that static
analysis does not try to look for cases where bytes->block can be
modified concurrently.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_get_codec_dai() can return NULL, but that value is not
checked for, leading to false-positive static analysis warnings
sound/soc/intel/boards/bdw_rt286.c:190:16: error: dereference of NULL
‘codec_dai’ [CWE-476] [-Werror=analyzer-null-dereference]
190 | return snd_soc_component_set_jack(codec_dai->component, NULL, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
‘card_suspend_pre’: event 1
|
| 190 | return snd_soc_component_set_jack(codec_dai->component, NULL, NULL);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (1) dereference of NULL ‘codec_dai’
This NULL dereference cannot happen, the codec-dai "rt286-aif1" must exists
otherwise the card would not be created. Static analysis cannot know
that however so we might as well squelch this report.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We implement a helper function to get number of codecs from ACPI
subsystem instead of using quirk flag in machine driver. Also refactor
module interface by adding max_98390_dai_link() function.
On the sof_rt5682 machine driver side, we remove the quirk flag
SOF_MAX98390_TWEETER_SPEAKER_PRESENT and use the new interface of
max98390 to setup dai link.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731103419.2536036-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1].
A suitable replacement is `strscpy` [2].
There are some hopes that someday the `strncpy` api could be ripped out
due to the vast number of suitable replacements (strscpy, strscpy_pad,
strtomem, strtomem_pad, strlcpy) [1].
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230725-sound-soc-intel-avs-remove-deprecated-strncpy-v1-1-6357a1f8e9cf@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use PCI device IDs from pci_ids.h header. BSW replaces CHV, as 0x22a8
was added in PCI header as BSW ID for consistency, as they are same
(similar) platforms. The ACPI IDs are used only internally and lower
16 bits uniquely define the device as vendor ID for Intel is 8086 for
all of them. Use PCI_DEVICE_DATA() to match PCI device to be consistent
with other Intel audio drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-16-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations. As Apollolake is
Broxton-P successor that made it to the market, be precise and use APL
shortcut.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-14-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header. Adjust AVS_MACH_ENTRY() macro,
so device ID can be provided in short form.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-13-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header and while at it change to using
PCI_DEVICE_DATA() macro, to simplify declarations.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-12-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of using local macro to match PCI device, use global one. As
Apollolake is Broxton-P successor that made it to the market, be precise
and use APL shortcut. IS_CFL() macro is dropped as it is unused.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-9-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This configuration supports JSL boards which implement ALC5650 dual
I2S interface codec. Two DAI links are added: AIF1 (on codec side) for
headphone and AIF2 for speakers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230712191423.443765-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To improve readability, reword several local variables to better match
their counterparts in declarations of soc-dai.h. For similar reasons,
wording for few comments is streamlined while redundant comments are
removed.
No functional changes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with what's done for all other boards and allocate jacks pins
dynamically and explicitly specify ->dai_fmt for the DAI link.
The latter clears any ambiguity - given the current implementation
of the codec driver, specifying format is optional but should the
implementation change, the sound card behaviour may be undesired.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update board-selection tables to account for rt5663 on KBL-based
platforms.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reorder the entries in quirk table to group entries with same platform.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Link: https://lore.kernel.org/r/20230616063617.25900-1-mac.chiang@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The loop checking for multiple different devices on a single sdw link
contains a typo accidentally using i twice instead of j. Correct to the
correct index variable.
Fixes: dc5a3e60a4 ("ASoC: Intel: sof_sdw: append codec type to dai link name")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230614142116.1059677-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The captured data will be combined from each cpu DAI if the dai link
has more than one cpu DAIs. We can set channel number indirectly by
adding sdw_codec_ch_maps.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230607031242.1032060-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Four routes "Left Playback<-sspX Tx", "Right Playback<-sspX Tx",
"sspX Rx<-Left Capture Sense", and "sspX Rx<-Right Capture Sense" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-13-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-12-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-11-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-10-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-9-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Playback<-sspX Tx" and "sspX Rx<-Capture" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-8-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Left HiFi Playback<-sspX Tx" and
"Right HiFi Playback<-sspX Tx" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-7-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Left HiFi Playback<-sspX Tx" and
"Right HiFi Playback<-sspX Tx" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-6-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The route "HiFi Playback<-sspX Tx" is created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-5-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Three routes "HDMI 0 Playback<-hdaudioB0D2-cpu0 Tx",
"HDMI 1 Playback<-hdaudioB0D2-cpu1 Tx" and
"HDMI 2 Playback<-hdaudioB0D2-cpu2 Tx" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-4-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "DMIC Rx<-Capture" and "DMIC WoV Rx<-Capture" are created
by snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-3-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Playback<-sspX Tx" and "sspX Rx<-Capture" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for MAX98363 soundwire codec. Update build
configuration to include this codec.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-27-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Init function and structure names are modified to use maxim
instead of max98373. Card components and speaker names are
updated based on part id.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-26-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is needed to use the common implementation for other maxim
soundwire codecs
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Helper functions added to support CS42l42 soundwire codec.
Build configuration is updated to include this codec.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Boards were using this in older kernels before adl and rpl ids were
split. Add this back to maintain support.
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Corrected the author name camel case and initial.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving amp only boards into end of the match table to have
better order and maintenance.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture support for the products doesn't have onboard
I2S codec.but need to support HDMI-In capture via I2S and audio playback
through HDMI/DP monitor.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support multiple codecs per SoundWire link, we have to assign multiple
CPU DAIs to different DAI links sharing the same physical link. This is
not possible with the existing code since we assume that only 'Pin2' is
used for playback and 'Pin3' used for capture - additional DAIs cannot
be handled.
This patch enables more CPU DAIs to be used, e.g. "SDW0 Pin2",
"SDW0 Pin3", and "SDW0 Pin4" for SDW0-Playback-SimpleJack,
SDW0-Capture-SimpleJack, and SDW0-Playback-SmartAmp DAI links on physical
link #0.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rt713 is rt712 but without amp.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rt712 is a multi function codec which shpports headset, amp, and dmic
functions. Rt712 has two sdw interfaces and codec drivers, one for jack
and amp, the other for dmic. part id 0x712 is for jack and amp, and 0x1712
is for dmic.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Let rename rt711_sdca to rt_sdca_jack and let it be used for all
Realtek sdca jacks.
The commit uses component->name_prefix to construct card->components,
and determine which codec it is. So, we have to set name_prefix
properly.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jack Detection source can be applied to all jacks, not only rt711.
No function changes.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
if (!SOF_RT711_JDSRC(sof_sdw_quirk)) is tested in rt711_sdca_add_codec_
device_props(), and we don't add software node to the device if jack
source is not set. We need to do the same test in
sof_sdw_rt711_sdca_exit(), and avoid removing software node if jack
source is not set.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A codec may support multiple dais for different purpose. For example,
the rt712 codec supports jack and amp on different dais and machine
driver needs to create different dailink for those dais.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We append codec type to dailink name to distinguish different dailink
on the same sdw link and direction. But we could create multi dailinks
for a codec and the dailink name will be duplicated if we append codec
type to the dailink name.
Appending dai type instead of codec type can solve the issue.
For example, if a codec supports JACK on dai 0 and AMP on dai 1, the
existing code will create dailinks
SDW0-Playback-SimpleJack or SDW0-Playback-SmartAmp for both dailinks,
and it will be SDW0-Playback-SimpleJack for dailink 0 and
SDW0-Playback-SmartAmp for dailink 1 after this change.
Then codec type is not used any more and can be removed.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
codec_info_list[codec_index] is used multiple times in the
create_sdw_dailink() function. Adding a codec_info pointer to shorten
the code. This is a preparation for the following up patches.
No function changed.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we assign dailink ids in order, and shift with codec type.
The purpose is to have consistent dailink ids for topologies.
This can be simplified if we have a predefined dailink id in
sof_sdw_dai_info.
We reuse the existing ids as the predefine ids. So the dailink ids will
not be changed by this commit.
With this change, we no longer need to check the adr order described in a
snd_soc_acpi_link_adr array.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code create a dailink for a codec. However, we may need
multi dailinks for a codec. This commit adds a new struct in
sof_sdw_codec_info{} to store the dai info of a codec.
The initial assumption if that we will create at most 3 dailink types
for a codec, since this is the max known with upcoming SDCA devices. We
may need to increase this number as new SDCA 'functions' become available.
One strong assumption is that all dailinks exposed are independent, as per
SDCA directions.
This commit just moves some items into the new sof_sdw_dai_info struct.
There is no function changed. Multi dais supported will be added in the
follow up commits.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constraint functions have return values, they should be checked for
potential errors.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All IPCs using instance_id use 8 bit value. Original commit used 16 bit
value because FW reports possible max value in 16 bit field, but in
practice FW limits the value to 8 bits.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Configurations with multiple codecs attached to the platform are
supported but only if each from the set is different. Add new field
representing the 'Unique ID' so that codecs that share Vendor and Part
IDs can be differentiated and thus enabling support for such
configurations.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.
Fixes: 580a5912d1 ("ASoC: Intel: avs: Declare module configuration types")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Path and its components should be accessed under lock to prevent
problems with one thread modifying them while other tries to read.
Fixes: c8c960c109 ("ASoC: Intel: avs: APL-based platforms support")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When changing value of kcontrol, FW module to which data should be send
needs to be found. Currently it is done in improper way, fix it. Change
function name to indicate that it looks only for volume module.
This allows to change volume during runtime, instead of only changing
init value.
Fixes: be2b81b519 ("ASoC: Intel: avs: Parse control tuples")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use RT711_JD2_100K for on board rt711
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
These tables are used for 'nocodec' and SoundWire mockups+RVP tests.
The LNL RVP has a single rt711-sdca SoundWire codec.
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Currently, set_codec_init_func always start with link->adr_d[0] because
we assumed all adr_d on the same link are the same devices. The
assumption is no longer valid when different devices on the same sdw link
are supported.
Fixes: c8db7b5012 ("ASoC: Intel: sof_sdw: support different devices on the same sdw link")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The description and board layout is changed and different
from previous ones for CometLake and Tigerlake.
The new codec layout for MTL is:
SDW0: RT711 Headphone
SDW1: RT714 DMIC
SDW2: RT1316 Speaker
SDW3: RT1316 Speaker
The previous codec layout for CML and TGL is:
SDW0: RT711 Headphone
SDW1: RT1316 Speaker
SDW2: RT1316 Speaker
SDW3: RT714 DMIC
Signed-off-by: Chao Song <chao.song@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
We should use RT711_JD2_100K for on board rt711.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Boards were using this in older kernels before adl and rpl ids were
split. Add this back to maintain support.
Signed-off-by: Terry Cheong <htcheong@chromium.org
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
