PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-3-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM6240 driver implements a flexible and configurable setting for register
and filter coefficients, to one, two or even multiple PCM6240 Family Audio
chips.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240407091846.1299-2-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the original fixed delay to the assignment from the property.
It will make it more flexible to different platforms to avoid pop
noise at the beginning of recording.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20240415070649.3496487-3-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
WSA881x codecs do not retain the state while clock is stopped, so mark
this with clk_stop_mode1 flag.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240419140012.91384-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154839.126852-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, all ASoC systems are set to use VPMON for DSP1RX5_SRC,
however, this is required only for internal boost systems.
External boost systems require VBSTMON instead of VPMON to be the
input to DSP1RX5_SRC.
Shared Boost Active acts like Internal boost (requires VPMON).
Shared Boost Passive acts like External boost (requires VBSTMON)
All systems require DSP1RX6_SRC to be set to VBSTMON.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240411142648.650921-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable ret is being assigned a value that is never read in a couple
of places. The variable is being re-assigned later on. The assignments
are redundant and can be removed.
Cleans up clang scan build warning:
sound/soc/codecs/tas2780.c:84:2: warning: Value stored to 'ret' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240411083332.304887-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This chain fixes some problems with some previous patches for handling
the ASP1 config registers. The root of the problem is that the ownership
of these registers can be either with the firmware or the driver, and that
the chip has to be soft-reset after downloading the firmware.
This chain adds and uses a regmap_read_bypassed() function so that the
driver can leave the regmap in cache-only until the chip has rebooted,
but still poll a register to detect when the chip has rebooted.
Richard Fitzgerald (4):
regmap: Add regmap_read_bypassed()
ALSA: hda: cs35l56: Exit cache-only after
cs35l56_wait_for_firmware_boot()
ASoC: cs35l56: Fix unintended bus access while resetting amp
ASoC: cs35l56: Prevent overwriting firmware ASP config
drivers/base/regmap/regmap.c | 37 ++++++++++++++
include/linux/regmap.h | 8 +++
include/sound/cs35l56.h | 2 +
sound/pci/hda/cs35l56_hda.c | 4 ++
sound/soc/codecs/cs35l56-sdw.c | 2 -
sound/soc/codecs/cs35l56-shared.c | 83 ++++++++++++++++++++-----------
sound/soc/codecs/cs35l56.c | 26 +++++++++-
7 files changed, 130 insertions(+), 32 deletions(-)
--
2.39.2
The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The various Rockchip embedded audio codecs are only present on Rockchip
SoCs. Hence add dependencies on ARCH_ROCKCHIP, to prevent asking the
user about these drivers when configuring a kernel without Rockchip SoC
support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/6cdbaf4afcf4d2059b257f6cb3a8a61bf5e17688.1712676714.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Only populate the ASP1 config registers in the regmap cache if the
ASP DAI is used. This prevents regcache_sync() from overwriting
these registers with their defaults when the firmware owns
control of these registers.
On a SoundWire system the ASP could be owned by the firmware to
share reference audio with the firmware on other cs35l56. Or it
can be used as a normal codec-codec interface owned by the driver.
The driver must not overwrite the registers if the firmware has
control of them.
The original implementation for this in commit 07f7d6e7a1
("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") was
to still provide defaults for these registers, assuming that if
they were never reconfigured from defaults then regcache_sync()
would not write them out because they are not dirty. Unfortunately
regcache_sync() is not that smart. If the chip has not reset (so
the driver has not called regcache_mark_dirty()) a regcache_sync()
could write out registers that are not dirty.
To avoid accidental overwriting of the ASP registers, they are
removed from the table of defaults and instead are populated with
defaults only if one of the ASP DAI configuration functions is
called. So if the DAI has never been configured, the firmware is
assumed to have ownership of these registers, and the regmap cache
will not contain any entries for them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a1 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://msgid.link/r/20240408101803.43183-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new regmap_read_bypassed() so that the regmap can be left
in cache-only mode while it is booting, but the driver can still
read boot-status and chip-id information during this time.
This fixes race conditions where some writes could be issued to the
silicon while it is still rebooting, before the driver has determined
that the boot is complete.
This is typically prevented by putting regmap into cache-only until the
hardware is ready. But this assumes that the driver does not need to
access device registers to determine when it is "ready". For cs35l56
this involves polling a register and the original implementation relied
on having special handlers to block racing callbacks until dsp_work()
is complete. However, some cases were missed, most notably the ASP DAI
functions.
The regmap_read_bypassed() function allows the fix for this to be
simplified to putting regmap into cache-only during the reset. The
initial boot stages (poll HALO_STATE and read the chip ID) are all done
bypassed. Only when the amp is seen to be booted is the cache-only
revoked.
Changes are:
- cs35l56_system_reset() now leaves the regmap in cache-only status.
- cs35l56_wait_for_firmware_boot() polls using regmap_read_bypassed().
- cs35l56_init() revokes cache-only either via cs35l56_hw_init() or
when firmware has rebooted after a soft reset.
- cs35l56_hw_init() exits cache-only after it has determined that the
amp has booted.
- cs35l56_sdw_init() doesn't disable cache-only, since this must be
deferred to cs35l56_init().
- cs35l56_runtime_resume_common() waits for firmware boot before exiting
cache-only.
These changes cover three situations where the registers are not
accessible:
1) SoundWire first-time enumeration. The regmap is kept in cache-only
until the chip is fully booted. The original code had to exit
cache-only to read chip status in cs35l56_init() and cs35l56_hw_init()
but this is now deferred to after the firmware has rebooted.
In this case cs35l56_sdw_probe() leaves regmap in cache-only
(unchanged behaviour) and cs35l56_hw_init() exits cache-only after the
firmware is booted and the chip identified.
2) Soft reset during first-time initialization. cs35l56_init() calls
cs35l56_system_reset(), which puts regmap into cache-only.
On I2C/SPI cs35l56_init() then flows through to call
cs35l56_wait_for_firmware_boot() and exit cache-only. On SoundWire
the re-enumeration will enter cs35l56_init() again, which then drops
down to call cs35l56_wait_for_firmware_boot() and exit cache-only.
3) Soft reset after firmware download. dsp_work() calls
cs35l56_system_reset(), which puts regmap into cache-only. After this
the flow is the same as (2).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240408101803.43183-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The newly added codec has an extraneous of_match_ptr() annotation for
the ID table:
sound/soc/codecs/rk3308_codec.c:956:34: error: 'rk3308_codec_of_match' defined but not used [-Werror=unused-const-variable=]
956 | static const struct of_device_id rk3308_codec_of_match[] = {
Remove it to avoid introducing a warning when -Wunused-const-variable
gets enabled by default:
Fixes: 4ed0915f5b ("ASoC: codecs: Add RK3308 internal audio codec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240404095755.650364-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches factors out some repeated code to clean up
firmware control read/write functions, and removes some redundant
control notification code.
base-commit: f193957b0f
Merge series from Luca Ceresoli <luca.ceresoli@bootlin.com>:
This small series fixes a build warning reported by kernel test robot
<lkp@intel.com> and improves the Kconfig entry.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
Changes in v2:
- Replaced v1 implementation with __maybe_unused
- Added patch to depend on || COMPILE_TEST
- Link to v1: https://lore.kernel.org/r/20240329-rk3308-audio-codec-fix-warning-v1-1-b9d177fcd6c9@bootlin.com
---
Luca Ceresoli (2):
ASoC: codecs: rk3308: fix "defined but not used" warning on !OF
ASoC: codecs: rk3308: depend on ARM64 || COMPILE_TEST
sound/soc/codecs/Kconfig | 1 +
sound/soc/codecs/rk3308_codec.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
---
base-commit: 4ed0915f5b
change-id: 20240329-rk3308-audio-codec-fix-warning-51bb572ebd96
Best regards,
--
Luca Ceresoli <luca.ceresoli@bootlin.com>
Any control that the driver is updating should be marked as SYSTEM and
therefore will not have an ALSA control to notify.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240325113127.112783-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using the cs_dsp_coeff_lock_and_[read|write]_ctrl() wrappers tidies
the calling functions as it does not need to manage the DSP pwr_lock.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240325113127.112783-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This codec is only known to exist in the RK3308 ARM64 SoC, so depend on it
except for compile test cases. Note that the driver won't probe without
CONFIG_OF, but ARM64 selects OF already so it is not needed.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240403-rk3308-audio-codec-fix-warning-v2-2-816bae4c1dc5@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch is modified nau8325_dac_oversampl_enum enumerated.
Use SOC_VALUE_ENUM instead to hide empty (presumably invalid) options.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://msgid.link/r/20240401104753.3432507-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We removed the configuration of ES8326_ADC_SCALE
in es8326_jack_detect_handler because user changed
the configuration by snd_controls
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-5-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We got a headphone detection issue after suspend and resume.
And we fixed it by modifying the configuration at es8326_suspend
and invoke es8326_irq at es8326_resume.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-4-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We got a digital microphone feature issue. And we fixed it by modifying
the clock table. Also, we changed the marco ES8326_CLK_ON declaration
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We got an error report about headphone type detection and button detection.
We fixed the headphone type detection error by adjusting the debounce timer
configuration. And we fixed the button detection error by disabling the
button detection feature when the headphone are unplugged and enabling it
when headphone are plugged in.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The drivers for Realtek SoundWire codecs use similar logs, which is
problematic to analyze problems reported by CI tools, e.g. "Failed to
get private value: 752001 => 0000 ret=-5". It's not uncommon to have
several Realtek devices on the same platform, having the same log
thrown makes support difficult.
This patch adds __func__ to all error logs which didn't already
include it.
No functionality change, only error logs are modified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: a0b7c59ac1 ("ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: 7a8735c155 ("ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: b69de265bd ("ASoC: rt711: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: 23adeb7056 ("ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: 02fb23d727 ("ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is for amplifiers NAU8325 of Nuvoton Technology Corporation.
The NAU8325 is a stereo high efficiency filter-free Class-D audio
amplifier, which is capable of driving a 4ohm load with up to 3W output
power.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://msgid.link/r/20240327075755.3410381-3-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-18-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-17-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-16-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-15-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-14-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-13-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-12-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-11-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-10-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-9-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-8-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-7-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-6-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-5-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-4-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in spi_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-3-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in spi_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-2-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai name are the same as rt715 codec. Rename them with rt715-sdca
prefix allow machine driver to distinguish rt715 and rt715-sdca from
dai name.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240326160429.13560-29-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
We changed the configuration related to hibernation.
and delete the REG_SUPPLY to cover mute issue.
The current code is pulling the wrong pointer causing it to disable the
wrong IRQ. Correct the code to pull the correct cs42l43 core data
pointer.
Fixes: 64353af49f ("ASoC: cs42l43: Add system suspend ops to disable IRQ")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240326105434.852907-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a couple of duplicate logs and missing information, add
__func__ consistently and make sure useful error codes are logged.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240325221925.206507-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a wmfw file has not been loaded the firmware control descriptions
necessary to write a stored calibration are not present. In this case
print a more descriptive error message.
The message is logged at info level because it is not fatal, and does
not necessarily imply that anything is broken.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240325144450.293630-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
REG_SUPPLY mutes the DAC when switching between
HDMI and speaker, so remove it to fix the mute issues
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240320083012.4282-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For lower power consumption during hibernation, the configuration of
es8326_suspend and es8326_remove will be adjusted.
Adding es8326_i2c_shutdown and es8326_i2c_remove to cover different
situations
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240320083012.4282-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A bunch of fixes that came in during the merge window, probably the most
substantial thing is the DPCM locking fix for compressed audio which has
been lurking for a while.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmX8GaoACgkQJNaLcl1U
h9Bbhgf8Dd66lvQDLnc6xJ5wznNrrlqgSGdMddIBmEUDz+dgw/ODMZXDG3mKmQSo
eE4eJ/fYeg/Kz4wrdaC+K5zZAZ+o61erXSKYmwyyE5YYnQLXd086Q6h8B0zKBA8e
vLChyVfoQE6lbIiGGedCQ+W2nP8k7HURkafTasBpq/PD/ZZgsQ8IbcQTf2EPQpw8
x9eRZFwswUvhaVckabJR23zIjkC/dlraAt0LAqWnjzetq0ZUL/7Um/SiKy+yF7f5
0w+QqzizbNee4kscadywAOB5u5S2P8F37cqH9cT6q0bvFYgwri0/CXtHd3m5164o
j/NQbxbFz/mlI4CFoXg5BCss5fd0zA==
=GHC9
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
A bunch of fixes that came in during the merge window, probably the most
substantial thing is the DPCM locking fix for compressed audio which has
been lurking for a while.
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXuGjEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGlhYH/3entux62pEL1BSR
3UNZvs41dZ6BW60d5+DQ+v/GnyEwn4Krtf054sfVL3cwGBLbErndo4F2eSHgMnRy
zUTLXl+aAQRpC47phNvXu1bC6jXm+xuXu/8VBYZWP+IP10zFtdSeTC2lQtYwpFd9
u1ZqUtTfKSWjADToLW6asjlviO6MV9rdAYkttJYcQ7Ztn/v+NAECMb0AvFDKHvh4
g74BA3bqslX1fPOMyAH/4u/IL0PRj1usLvbCsTAujb5R9121geYRBylgw0Ei3YXx
P+vaOmJeO33bWiRNdfxEMoQSfJ+q7Jq/x5utZ/SckAy8bFJG7VimQwRrFYtcN6ls
LR0oKRY=
=e2GM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXx7wEACgkQJNaLcl1U
h9BYKwf/YYh4JqMRk9bqq+36XjtTluiHvZ45GjDhuEl+dprzAEZTlRxR7JXj8QqU
4G6uywax6qI6Uynlrz78Mk707nkQLjyfJxRblE8NiSwTOHKg5KMh0zmatOPJEHiX
AGKoI7AJjWdtL0+qQmiNTTzEDsJgpL3kivCPXlOl0bdL67H92Do9Hof3e0JeseTy
AT6KMQHt4JxuBh1I/FpeY+WUc77TaM9mlp3itkOUdAxnb90OqItVGRxcs3i2WSH0
sdu5GxpozA5sXBwQh5yz3O9hXzXH0cGCgY5jNylRxzwOdroUTLyZHUItEHAZY4Uj
TpUl6Pjf1m1ieBJxjii3qoC4/iHdrg==
=U9Ja
-----END PGP SIGNATURE-----
ASoC: Merge up release
In order to apply additional fixes that depend on the fixes merged for
v6.8 merge up the final release.
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvE1AACgkQJNaLcl1U
h9B15Qf8CrS5zHsD54bvTcumkDgbJ8Dl9f5qz4UN/AX0mcZ1UJU6sQ0HxIGEtlPc
26pneHV9ZA0wSPw432NBpwcfe7AsWASmKUf6S2hsj4LMvnoj75iiZum8TE71ior7
QI9ARnNipB1tHk7Kmgs/pe+CqX3hhCVqYUI9w5fMIj05T5qwYbqCERws6JA2Uw97
6fb5CgI2uRYTShVVmYsE/FlxXmZqNN4NnNxlVvUSM5TE3Tayf+BCEqhpwuh59Pt/
G+mZfj3eof0HdjGPQbLRPOWQOa3bT8gmT89OlbmmMf17+975pgShBbARzkv41vk1
ifr6muHweaDLD7gloS/HUr4JRo9Daw==
=ZYC5
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
Using __exit for the remove function results in the remove callback
being discarded with SND_SOC_TLV320ADC3XXX=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: sound/soc/codecs/snd-soc-tlv320adc3xxx: section mismatch in reference: adc3xxx_i2c_driver+0x10 (section: .data) -> adc3xxx_i2c_remove (section: .exit.text)
(which only happens with SND_SOC_TLV320ADC3XXX=m).
Fixes: e9a3b57efd ("ASoC: codec: tlv320adc3xxx: New codec driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://msgid.link/r/20240310143852.397212-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L54 and CS35L57 are Boosted Smart Amplifiers. The CS35L54 has
I2C/SPI control and I2S/TDM audio. The CS35L57 also has SoundWire
control and audio.
The hardware differences between L54, L56 and L57 do not affect the
driver control interface so they can all be handled by the same driver.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240308135900.603192-2-rf@opensource.cirrus.com>
wm_adsp_write_ctl() must hold the pwr_lock mutex when calling
cs_dsp_get_ctl().
This was previously partially fixed by commit 781118bc2f
("ASoC: wm_adsp: Fix missing locking in wm_adsp_[read|write]_ctl()")
but this only put locking around the call to cs_dsp_coeff_write_ctrl(),
missing the call to cs_dsp_get_ctl().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 781118bc2f ("ASoC: wm_adsp: Fix missing locking in wm_adsp_[read|write]_ctl()")
Link: https://msgid.link/r/20240307110227.41421-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't use mic1_src and mic2_src.so we delete these two members.
We changed the default value of interrupt-clk for headphone detection
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240307051222.24010-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a KUnit test for the cs-amp-lib library. This has test cases
for cs_amp_get_efi_calibration_data() and cs_amp_write_cal_coeffs().
A KUNIT_STATIC_STUB_REDIRECT() has been added to
cs_amp_get_efi_variable() and cs_amp_write_cal_coeff() so that the
KUnit test can redirect these to test harness functions.
Much of the testing involves invoking the same function with different
parameters, i.e. the number of amps and the amp index within the array.
This uses parameterization rather than looping. The idea is to avoid
looping over configurations within one test case as that has a higher
chance of having a bug that doesn't actually test all the expected cases.
Having the test run exactly one configuration, and then tear-down, is less
prone to accidentally skipped configurations.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240304143705.26362-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If i915 does not support given platform but the hardware i.e.: HDAudio
codec is still there, the codec-probing procedure will succeed for such
device but the follow up initialization will always end up with -ENODEV.
While bus could filter out address '2' which Intel's HDMI/DP codecs
always enumerate on, more robust approach is to check for i915 presence
before registering display codecs.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240226124432.1203798-3-cezary.rojewski@intel.com
Fix a typo in the shift value used in madera_set_fll_clks.
Fixes: 3863857dd5 ("ASoC: madera: Enable clocks for input pins when used for the FLL")
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240229114637.352098-1-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cast u8 values to u32 when using them to build a 32-bit unsigned value
that is then stored in a u64. This avoids the possibility of a bad sign
extension where the u8 is implicitly extended to an int, thus changing it
from an unsigned to a signed value.
Whether this is a real problem is debatable, but it does no harm to
ensure that the u8 are cast to a suitable type for shifting.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e1830f66f6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Link: https://msgid.link/r/20240227100042.99-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The patchset may not cover all codecs found in the codecs/ directory -
noticed a possible improvement and grepped for similar pattern across C
files found in the directory. Those addressed here seem pretty
straightforward.
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Starting with Qualcomm SM8350 SoC, so Low Power Audio SubSystem (LPASS)
block version v9.2, the register responsible for TX SMIC MUXn muxes is
different. In earlier LPASS versions this mux had bit fields for
analogue (ADCn) and digital (SWR_DMICn) MICs. Choice of ADCn was
selecting the analogue path in CDC_TX_TOP_CSR_SWR_DMICn_CTL register.
With LPASS v9.2 and newer, the bit fields are integrated into just
SWR_MICn and there is no distinction for analogue or digital MIC in the
register.
Fix support for LPASS v9.2+:
1. Add new set of widgets and audio routes for LPASS v9.2.
2. Do not choose analogue or digital in CDC_TX_TOP_CSR_SWR_DMICn_CTL
based on value of the mux.
3. Replace all the input widgets (TX SWR_ADCn, TX SWR_DMICn) with TX
SWR_INPUTn ones.
The change is not backwards compatible with older DTBs and existing
mixer settings, therefore it does not change handling of older platforms
with working micrphones (SC8280xp) but only the ones with issues
(SM8450, SM8550) which need the fix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240226115925.53953-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
TX macro codec differs slightly between different Qualcomm Low Power
Audio SubSystem (LPASS) block versions. In LPASS version 9.2 the
register responsible for TX SMIC MUXn muxes is different, thus to
properly support it, the driver needs to register different widgets per
different LPASS version.
Prepare for supporting this register difference by refactoring existing
code:
1. Move few widgets (TX SMIC MUXn, TX SWR_ADCn, TX SWR_DMICn) out of
common 'tx_macro_dapm_widgets[]' array to a new per-variant specific
array 'tx_macro_dapm_widgets_v9[]'.
2. Move also related audio routes into new array.
3. Store pointers to these variant-specific arrays in new variant-data
structure 'tx_macro_data'.
4. Add variant-specific widgets and routes in component probe, instead
of driver probe.
The change should have no real impact, except re-shuffling code and
registering some widgets and audio routes in component probe, instead of
driver probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240226115925.53953-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Factory calibration of the speakers stores the calibration information
into an EFI variable.
This set of patches adds support for applying speaker calibration
data from that EFI variable.
The HDA patch (#5) depends on the ASoC patches #2 and #3
If there are factory calibration settings in EFI, extract the
settings and write them to the firmware calibration controls.
This must be done after any firmware or coefficients have been
downloaded to the amp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds some helper functions and data for applying amp calibration.
1. cs35l56_read_silicon_uid() to get the silicon ID that is used to
search for the correct calibration data entry.
2. Add the registers for the silicon ID to the readable registers.
3. cs35l56_get_calibration() wrapper around
cs_amp_get_efi_calibration_data()
4. cs35l56_calibration_controls() table of the firmware controls
for calibration data.
5. Added members to struct cs35l56_base to store the calibration
data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create a new library for code that is used by multiple Cirrus Logic
amps. This initially implements extracting amp calibration data
from EFI and writing it to firmware controls.
During factory calibration of built-in speakers the firmware
calibration constants are stored in an EFI file. The file contains
an array of calibration constants for each of the speakers.
cs_amp_get_calibration_data() searches for an entry matching the
requested UID stamp, otherwise by array index. If the data is found in
EFI the constants for that speaker are copied back to the caller.
If EFI is not enabled, the cs_amp_get_calibration_data() implementation
will compile to simply return -ENOENT and the linker can drop the code.
The code to write calibration controls uses cs_dsp. Building of cs_dsp
is not forced. Instead, the code will compile away the calls to
cs_dsp if cs_dsp is not reachable.
This strategy of conditional code allows cs-amp-lib to be shared by
multiple drivers without forcing inclusion of other modules that might
be unnecessary.
The calls to efi.get_variable() and cs_dsp are in small wrapper
functions. This is so that a KUNIT_STATIC_STUB_REDIRECT can be added in
a future patch to redirect these calls to replacement functions for
KUnit testing.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the functionality of wm_adsp_event() into two exported
functions wm_adsp_start() and wm_adsp_stop().
This allows the codec driver to start and stop the DSP outside of a
DAPM widget.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_get_kcontrol() must be holding a read lock on
card->controls_rwsem while walking the controls list.
Compare with snd_ctl_find_numid().
The existing function is renamed snd_soc_card_get_kcontrol_locked()
so that it can be called from contexts that are already holding
card->controls_rwsem (for example, control get/put functions).
There are few direct or indirect callers of
snd_soc_card_get_kcontrol(), and most are safe. Three require
changes, which have been included in this patch:
codecs/cs35l45.c:
cs35l45_activate_ctl() is called from a control put() function so
is changed to call snd_soc_card_get_kcontrol_locked().
codecs/cs35l56.c:
cs35l56_sync_asp1_mixer_widgets_with_firmware() is called from
control get()/put() functions so is changed to call
snd_soc_card_get_kcontrol_locked().
fsl/fsl_xcvr.c:
fsl_xcvr_activate_ctl() is called from three places, one of which
already holds card->controls_rwsem:
1. fsl_xcvr_mode_put(), a control put function, which will
already be holding card->controls_rwsem.
2. fsl_xcvr_startup(), a DAI startup function.
3. fsl_xcvr_shutdown(), a DAI shutdown function.
To fix this, fsl_xcvr_activate_ctl() has been changed to call
snd_soc_card_get_kcontrol_locked() so that it is safe to call
directly from fsl_xcvr_mode_put().
The fsl_xcvr_startup() and fsl_xcvr_shutdown() functions have been
changed to take a read lock on card->controls_rsem() around calls
to fsl_xcvr_activate_ctl(). While this is not very elegant, it
keeps the change small, to avoid this patch creating a large
collateral churn in fsl/fsl_xcvr.c.
Analysis of other callers of snd_soc_card_get_kcontrol() is that
they do not need any changes, they are not holding card->controls_rwsem
when they call snd_soc_card_get_kcontrol().
Direct callers of snd_soc_card_get_kcontrol():
fsl/fsl_spdif.c: fsl_spdif_dai_probe() - DAI probe function
fsl/fsl_micfil.c: voice_detected_fn() - IRQ handler
Indirect callers via soc_component_notify_control():
codecs/cs42l43: cs42l43_mic_shutter() - IRQ handler
codecs/cs42l43: cs42l43_spk_shutter() - IRQ handler
codecs/ak4118.c: ak4118_irq_handler() - IRQ handler
codecs/wm_adsp.c: wm_adsp_write_ctl() - not currently used
Indirect callers via snd_soc_limit_volume():
qcom/sc8280xp.c: sc8280xp_snd_init() - DAIlink init function
ti/rx51.c: rx51_aic34_init() - DAI init function
I don't have hardware to test the fsl/*, qcom/sc828xp.c, ti/rx51.c
and ak4118.c changes.
Backport note:
The fsl/, qcom/, cs35l45, cs35l56 and cs42l43 callers were added
since the Fixes commit so won't all be present on older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 209c6cdfd2 ("ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card")
Link: https://lore.kernel.org/r/20240221123710.690224-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
rt5640_set_dai_sysclk() is an example of that - clk_set_rate() is not
guarded by IS_ERR().
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of clk_xxx() functions do check if provided clk-pointer is
non-NULL. These do not check if the pointer is an error-pointer.
Providing such to a clk_xxx() results in a panic.
By utilizing _optional() variant of devm_clk_get() the driver code is
both simplified and more robust. There is no need to remember about
IS_ERR(clk) checks each time mclk is accessed.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240221152516.852353-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On some boards with multiple WSA8840/WSA8845 speakers, the reset
(shutdown) GPIO is shared between two speakers. Use the reset
controller framework and its "reset-gpio" driver to handle this case.
This allows bring-up and proper handling of all WSA884x speakers on
X1E80100-CRD board.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240129115216.96479-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based (cAVS 2.5) e.g.: RPL, inherit most of the functionality
from previous platforms:
SKL <- APL <- CNL <- ICL <- TGL
rather than putting everything into a single file, the platform-specific
bits are split into cnl/icl/tgl.c files instead. Makes the division clear
and code easier to maintain.
Layout of the patchset:
First are two changes combined together address the sound-clipping
problem, present when only one stream is running - specifically one
CAPTURE stream.
Follow up is naming-scheme adjustment for some of the existing functions
what improves code incohesiveness. As existing IPC/IRQ code operates
solely on cAVS 1.5 architecture, it needs no abstraction. The situation
changes when newer platforms come into the picture. Thus the next two
patches abstract the existing IPC/IRQ handlers so that majority of the
common code can be re-used.
The ICCMAX change stands out a bit - the AudioDSP firmware loading
procedure differs on ICL-based platforms (and onwards) and having a
separate commit makes the situation clear to the developers who are
going to support the solution from LTS perspective. For that reason
I decided not to merge it into the commit introducing the icl.c file.
The pointer 'data' being initialized with a value that is never read, it
is being re-assigned inside a while-loop. The initialization is redundant
and can be removed.
Cleans up clang scan build warning
sound/soc/codecs/tas2781-fmwlib.c:1534:17: warning: Value stored to
'data' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240216142219.2109050-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver must write 0 to HALO_STATE before sending the SYSTEM_RESET
command to the firmware.
HALO_STATE is in DSP memory, which is preserved across a soft reset.
The SYSTEM_RESET command does not change the value of HALO_STATE.
There is period of time while the CS35L56 is resetting, before the
firmware has started to boot, where a read of HALO_STATE will return
the value it had before the SYSTEM_RESET. If the driver does not
clear HALO_STATE, this would return BOOT_DONE status even though the
firmware has not booted.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240216140535.1434933-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI in some SoundWire laptops has a spk-id-gpios property but
it points to the wrong Device node. This patch adds a workaround to
try to get the GPIO directly from the correct Device node.
If the attempt to get the GPIOs from the property fails, the workaround
looks for the SDCA node "AF01", which is where the GpioIo resource is
defined. If this exists, a spk-id-gpios mapping is added to that node
and then the GPIO is got from that node using the property.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240209111840.1543630-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When updating all bits in AMIC control registers (mask 0xff), use more
obvious snd_soc_component_write(). Replace also hard-coded value 0x00
with a define.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240202154134.66967-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Downstream driver configures DMIC clock rate through the divider
register but only parts of this code ended up in the upstream driver: we
always write the same value 0, so DIV2. Same default value is used also
for the AMIC rate control.
Let's make it obvious and drop unneeded parts of the code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240202154134.66967-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
New versions of VA Macro has soundwire integrated, so handle the soundwire npl
clock correctly in the codec driver.
Introduce has_npl_clk and handle the sm8550 case separately because
it has soundwire integrated but doesn't have an npl clock.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20240203-topic-sm8x50-upstream-va-macro-npl-v2-1-f2db82ae3359@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch corrects a common misspelling of "request" as "reguest" found
in error log across multiple files within sound/soc/codecs.
Signed-off-by: Yinchuan Guo <guoych37@mail2.sysu.edu.cn>
Link: https://msgid.link/r/20240212144247.43744-1-guoych37@mail2.sysu.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The MeeGoPad T8 uses the standard rt5645 jd_mode=3 setting for jack-detect,
but the used jack connector outputs an inverted jack-detect signal.
Add a DMI quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240211212736.179605-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex
is left locked forever. That may lead to deadlock
when rt5645_jack_detect_work() is called for the second time.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cdba4301ad ("ASoC: rt5650: add mutex to avoid the jack detection failure")
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver never uses the IRQ1_CFG register so there's no need to provide
a default value. It's set as a readable register only for debugging
through the regmap registers file.
A system-specific firmware could overwrite this register with a non-default
value. Therefore the driver can't hardcode what the initial value actually
is. As the register is only for debugging the value can be left unknown
until someone wants to read it through debugfs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240209145700.1555950-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite the handling of ASP1 TX mixer mux initialization to prevent a
deadlock during component_remove().
The firmware can overwrite the ASP1 TX mixer registers with
system-specific settings. This is mainly for hardware that uses the
ASP as a chip-to-chip link controlled by the firmware. Because of this
the driver cannot know the starting state of the ASP1 mixer muxes until
the firmware has been downloaded and rebooted.
The original workaround for this was to queue a work function from the
dsp_work() job. This work then read the register values (populating the
regmap cache the first time around) and then called
snd_soc_dapm_mux_update_power(). The problem with this is that it was
ultimately triggered by cs35l56_component_probe() queueing dsp_work,
which meant that it would be running in parallel with the rest of the
ASoC component and card initialization. To prevent accessing DAPM before
it was fully initialized the work function took the card mutex. But this
would deadlock if cs35l56_component_remove() was called before the work job
had completed, because ASoC calls component_remove() with the card mutex
held.
This new version removes the work function. Instead the regmap cache and
DAPM mux widgets are initialized the first time any of the associated ALSA
controls is read or written.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a1 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://lore.kernel.org/r/20240208123742.1278104-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IRQ should be disabled whilst entering and exiting system suspend to
avoid the IRQ handler being called whilst the PM runtime is disabled.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240206113850.719888-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_WCD939X has an optional dependency on TYPEC, so the newly added
SND_SOC_WCD939X_SDW option that selects it needs the same dependency, otherwise
it can fail randconfig builds like:
WARNING: unmet direct dependencies detected for SND_SOC_WCD939X
Depends on [m]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_WCD939X_SDW [=y] && (SOUNDWIRE [=y] || !SOUNDWIRE [=y]) && (TYPEC [=m]
|| !TYPEC [=m])
Selected by [y]:
- SND_SOC_WCD939X_SDW [=y] && SOUND [=y] && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=y]
arm-linux-gnueabi-ld: sound/soc/codecs/wcd939x.o: in function `wcd939x_soc_codec_remove':
wcd939x.c:(.text+0x1950): undefined reference to `wcd_clsh_ctrl_free'
arm-linux-gnueabi-ld: sound/soc/codecs/wcd939x.o: in function `wcd939x_codec_ear_dac_event':
wcd939x.c:(.text+0x35d8): undefined reference to `wcd_clsh_ctrl_set_state'
arm-linux-gnueabi-ld: sound/soc/codecs/wcd939x.o: in function `wcd939x_codec_enable_hphr_pa':
wcd939x.c:(.text+0x39b0): undefined reference to `wcd_clsh_ctrl_set_state'
arm-linux-gnueabi-ld: wcd939x.c:(.text+0x39dc): undefined reference to `wcd_clsh_set_hph_mode'
arm-linux-gnueabi-ld: wcd939x.c:(.text+0x3bc0): undefined reference to `wcd_clsh_ctrl_set_state'
Fixes: be2af391ce ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240204212207.3158914-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Synchronise the headphone ilimit work functions when removing the
component. These can only trigger whilst the headphone is enabled which
shouldn't be possible once the component is removed but the works rely
on the stashed component pointer so they should be shut down before the
code moves on from component remove.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240202140619.1068560-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the component is removed the stashed component pointer in the
CODECs private struct should also be cleared to prevent use of a stale
pointer.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240202140619.1068560-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tascodec_init() of the snd-soc-tas2781-comlib module is called from
snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls
request_firmware_nowait() with parameter THIS_MODULE and a cont/callback
from the latter modules.
The latter modules can be removed while their callbacks are running,
resulting in a general protection failure.
Add module parameter to tascodec_init() so request_firmware_nowait() can
be called with the module of the callback.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
It looks like the "!" character was added accidentally. The
regmap_update_bits_check() function is normally going to succeed. This
means the rest of the function is unreachable and we don't handle the
situation where "changed" is true correctly.
Fixes: 07f7d6e7a1 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/0c254c07-d1c0-4a5c-a22b-7e135cab032c@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These patches fixe various things that were undocumented, unknown or
uncertain when the original driver code was written. And also a few
things that were just bugs.
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794e ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check during initialization whether the firmware is already patched.
If so, include the firmware version in the wm_adsp fwf_name string.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if FIRMWARE_MISSING == 0.
Including the firmware version in the fwf_name string will
qualify the firmware file name:
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Put the silicon revision and secured flag in the wm_adsp fwf_name
string instead of including them in the part string.
This changes the format of the firmware name string from
cs35l56[s]-rev-misc[-system_name]
to
cs35l56-rev[-s]-misc[-system_name]
No firmware files have been published, so this doesn't cause a
compatibility break.
Silicon revision and secured flag are included in the firmware
filename to pick a firmware compatible with the part. These strings
were being added to the part string, but that is a misuse of the
string. The correct place for these is the fwf_name string, which
is specifically intended to select between multiple firmware files
for the same part.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Defer initializing the state of the ASP1 mixer registers until
the firmware has been downloaded and rebooted.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However, if it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link. Even if the ASP is used
as a firmware-firmware interconnect it is useful to have
ALSA controls for the ASP mixer. They are at least useful for
debugging.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP mixer registers. This means that we can't assume the default
state of these registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
DAPM normally reads the initial state of mux registers during
probe() but this would mean blocking probe() for several seconds
until the firmware has initialized them. To avoid this, the
mixer muxes are set SND_SOC_NOPM to prevent DAPM trying to read
the register state. Custom get/set callbacks are implemented for
ALSA control access, and these can safely block waiting for the
firmware download.
After the firmware download has completed, the state of the
mux registers is known so a work job is queued to call
snd_soc_dapm_mux_update_power() on each of the mux widgets.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Patch the SDW TX mixer registers to silicon defaults.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So the
firmware sets up the SDW TX mixer registers to whatever audio
is relevant on a specific system.
This means that the driver cannot assume the initial values
of these registers. But Linux has ALSA controls to configure
routing, so the registers can be patched to silicon default and
the ALSA controls used to select what audio to feed back to the
host capture path.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the check of fw_patched from cs35l56_is_fw_reload_needed().
Also remove the redundant check for control of the reset GPIO.
The fw_patched flag is set when cs35l56_dsp_work() has completed its
steps to download firmware and power-up wm_adsp. There was a check in
cs35l56_is_fw_reload_needed() to make a quick exit of 'false' if
!fw_patched. The original idea was that the system might be suspended
before the driver has ever made any attempt to download firmware, and
in that case the driver doesn't need to return to a patched state
because it was never in a patched state.
This check of fw_patched is buggy because it prevented ever recovering
from a failed patch. If a previous attempt to patch and reboot the
silicon had failed it would leave fw_patched==false. This would mean
the driver never attempted another download even though the fault may
have been cleared (by a hard reset, for example).
It is also a redundant check because the calling code already makes
a quick exit if cs35l56_component_probe() has not been called, which
deals with the original intent of this check but in a safer way.
The check for reset GPIO is redundant: if the silicon was hard-reset
the FIRMWARE_MISSING flag will be 1. But this check created an
expectation that the suspend/resume code toggles reset. This can't
easily be protected against accidental code breakage. The only reason
for the check was to skip runtime-resuming the driver to read the
PROTECTION_STATUS register when it already knows it reset the silicon.
But in that case the driver will have to be runtime-resumed to do
the firmware download. So it created an assumption for no benefit.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240129162737.497-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the call to cs35l56_set_patch() earlier in cs35l56_init() so
that it only adds the register patch on first-time initialization.
The call was after the post_soft_reset label, so every time this
function was run to re-initialize the hardware after a reset it would
call regmap_register_patch() and add the same reg_sequence again.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 898673b905 ("ASoC: cs35l56: Move shared data into a common data structure")
Link: https://msgid.link/r/20240129162737.497-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs35l56_component_remove() must call wm_adsp_power_down() and
wm_adsp2_component_remove().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l56->component pointer is used by the suspend-resume handling to
know whether the driver is fully instantiated. This is to prevent it
queuing dsp_work which would result in calling wm_adsp when the driver
is not an instantiated ASoC component. So this pointer must be cleared
by cs35l56_component_remove().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no need to overwrite fwf_name with a kstrdup() of the cs_dsp part
name. It is trivial to select either fwf_name or cs_dsp.part as the string
to use when building the filename in wm_adsp_request_firmware_file().
This leaves fwf_name entirely owned by the codec driver.
It also avoids problems with freeing the pointer. With the original code
fwf_name was either a pointer owned by the codec driver, or a kstrdup()
created by wm_adsp. This meant wm_adsp must free it if it set it, but not
if the codec driver set it. The code was handling this by using
devm_kstrdup().
But there is no absolute requirement that wm_adsp_common_init() must be
called from probe(), so this was a pseudo-memory leak - each new call to
wm_adsp_common_init() would allocate another block of memory but these
would only be freed if the owning codec driver was removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240129162737.497-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 0e7d82cbea ("ASoC: wm_adsp: Add support for loading bin files without wmfw")
Link: https://msgid.link/r/20240129162737.497-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use fls to calculate the pre-divider and input frequency for the PLL,
this is marginally faster than the previous loop.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the code in cs42l43_mask_to_slots() to use for_each_set_bit().
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use USEC_PER_MSEC rather than the hard coded value of 1000.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Whilst reading cirrus,buttons-ohms the error from
device_property_read_u32_array() is not checked, whilst there is a
preceding device_property_count_u32() which is checked the property
read can still fail. Add the missing check.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some missing commas, refactor a couple small bits of code.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use more forward declarations, move header guards to cover other
includes, and rely less on including headers through other headers.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://msgid.link/r/20240125103117.2622095-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ES8326 features a headphone volume control register and four DAC
volume control registers.
We add new volume Kcontrols for these registers to enhance the
configurability of the volume settings, providing users with
greater flexibility.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240124064806.30511-2-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the wcd939x codec driver, there are two instances where semicolons
are used after closing braces of a switch-case statement. These
semicolons are not required and do not adhere to the coding style
guidelines.
This patch removes the unnecessary semicolons at the end of the
switch-case statements which cleans up the code and ensures consistency
with the rest of the kernel coding style.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://msgid.link/r/20240124004425.54020-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The framer codec interacts with a framer.
It allows to use some of the framer timeslots as audio channels to
transport audio data over the framer E1/T1/J1 lines.
It also reports line carrier detection events through the ALSA jack
detection feature.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://msgid.link/r/20240123165615.250303-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johan Hovold <johan+linaro@kernel.org>:
To reduce the risk of speaker damage the PA gain needs to be limited on
machines like the Lenovo Thinkpad X13s until we have active speaker
protection in place.
Limit the gain to the current default setting provided by the UCM
configuration which most user have so far been using (due to a bug in
the configuration files which prevented hardware volume control [1]).
The wsa883x PA volume control also turned out to be broken, which meant
that the default setting used by UCM configuration is actually the
lowest level (-3 dB). With the codec driver fixed, hardware volume
control also works as expected.
Note that the new wsa884x driver most likely suffers from a similar bug,
I'll send a fix for that once I've got that confirmed.
Included is also a related fix for the LPASS WSA macro driver, which
was changing the digital gain setting behind the back of user space and
which can result in excessive (or too low) digital gain.
There are further Qualcomm codec drivers that similarly appear to
manipulate various gain settings, but on closer inspection it turns out
that they only write back the current settings. Tests reveal that these
writes are indeed needed for any prior updates to take effect (at least
for the WSA and RX macros).
[1] https://github.com/alsa-project/alsa-ucm-conf/pull/382
Merge series from Neil Armstrong <neil.armstrong@linaro.org>:
Add the main WCD9390/WCD9395 Audio Codec driver to support:
- 4 ADC inputs for up to 5 Analog Microphones
- 4 DMIC inputs for up to 8 Digital Microphones
- 4 Microphone BIAS
- Stereo Headphone output
- Mono EAR output
- MBHC engine for Headset Detection
This adds:
- bindings
- MBHC changes to support Type-C muc
- Soundwire Slave driver
- Code driver
The USB Mux subsystem support will be submitted separately
since it's a functionally separate subsystem connected over
I2C with it's own reset signal.
Probe calls wcd938x_populate_dt_data() which already prints all the
error cases with dev_err_probe(), so skip the additional dev_err().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
WCD938x sound codec driver ignores return status of getting regulators
and returns EINVAL instead of EPROBE_DEFER. If regulator provider
probes after the codec, system is left without probed audio:
wcd938x_codec audio-codec: wcd938x_probe: Fail to obtain platform data
wcd938x_codec: probe of audio-codec failed with error -22
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The lowest headphones volume setting does not mute so the leave the TLV
mute flag unset.
This is specifically needed to let the sound server use the lowest gain
setting.
Fixes: c03226ba15 ("ASoC: codecs: wcd938x: fix dB range for HPHL and HPHR")
Cc: <stable@vger.kernel.org> # 6.5
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122091130.27463-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The vendor driver appears to be modifying the gain settings behind the
back of user space but these hacks never made it upstream except for
some essentially dead code that adds a constant zero to the current gain
setting on DAPM events.
Note that the volume registers still need to be written after enabling
clocks in order for any prior updates to take effect.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-5-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The LPASS WSA macro codec driver is updating the digital gain settings
behind the back of user space on DAPM events if companding has been
enabled.
As compander control is exported to user space, this can result in the
digital gain setting being incremented (or decremented) every time the
sound server is started and the codec suspended depending on what the
UCM configuration looks like.
Soon enough playback will become distorted (or too quiet).
This is specifically a problem on the Lenovo ThinkPad X13s as this
bypasses the limit for the digital gain setting that has been set by the
machine driver.
Fix this by simply dropping the compander gain offset hack. If someone
cares about modelling the impact of the compander setting this can
possibly be done by exporting it as a volume control later.
Note that the volume registers still need to be written after enabling
clocks in order for any prior updates to take effect.
Fixes: 2c4066e5d4 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org # 5.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The PA gain can be set in steps of 1.5 dB from -3 dB to 18 dB, that is,
in 15 levels.
Fix the dB values for the PA volume control as experiments using wsa8835
show that the first 16 levels all map to the same lowest gain while the
last three map to the highest gain.
These values specifically need to be correct for the sound server to
provide proper volume control.
Note that level 0 (-3 dB) does not mute the PA so the mute flag should
also not be set.
Fixes: cdb09e6231 ("ASoC: codecs: wsa883x: add control, dapm widgets and map")
Cc: stable@vger.kernel.org # 6.0
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We get a noise issue during the startup of recording. We update the
register setting and dapm widgets to fix this issue.
we change callback type of es8326_mute function to mute_stream.
ES8326_ADC_MUTE is moved to es8326_mute function so it can
be turned on at last and turned off at first.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240120101240.12496-6-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We modify the register settings to minimize headphone pop noise
during ES8326 power-up and music start/stop.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240120101240.12496-5-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We update the values of some registers in the initialization
sequence in es8326_resume function to improve THD+N performance.
THD+N performance decreases if the output level on headphone is
close to full scale. So we change the register setting in
es8326_jack_detect_handler function to improve THD+N performance
if headphone pulgged. Also, the register setting should be restored
when the headset is unplugged
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240120101240.12496-3-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We change the crosstalk parameter in es8326_resume function
to improve crosstalk performance.
Adding crosstalk kcontrol to enhance the flexibility of crosstalk
debugging in machine.
Adding ES8326_DAC_CROSSTALK macro to declare the crosstalk register.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240120101240.12496-2-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding pre-charge mechanism to make FEPGA power stable faster. It
not only improved the recording quality at the beginning but also
meaningfully decreased the final adc delay time.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://msgid.link/r/20240116024519.24569-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the main WCD9390/WCD9395 Audio Codec driver to support:
- 4 ADC inputs for up to 5 Analog Microphones
- 4 DMIC inputs for up to 8 Digital Microphones
- 4 Microphone BIAS
- Stereo Headphone output
- Mono EAR output
- MBHC engine for Headset Detection
It makes usage of the generic MBHC and CLSH generic code and
the USB Type-C mux and switch helpers to gather USB-C Events
in order to properly setup Headset Detection mechanism
when connected behind the separate USB-C Mux subsystem.
WCD9390/WCD9395 supports a PCM path for Playback instead
of the actually implemented PDM playback, it will be
implemented later.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20231219-topic-sm8650-upstream-wcd939x-codec-v4-5-1c3bbff2d7ab@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Soundwire Slave driver for the WCD9390/WCD9395 Audio Codec.
The WCD9390/WCD9395 Soundwire devices will be used by the
main WCD9390/WCD9395 Audio Codec driver to access registers
and configure Soundwire RX and TX ports.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20231219-topic-sm8650-upstream-wcd939x-codec-v4-4-1c3bbff2d7ab@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the WCD codec is connected behind an USB-C audio mux,
plug/unplug events, clock control, pull-up and threshold are
different.
Add a typec_analog_mux config enabling those changes and add
two callbacks to trigger plug/unplug events from USB-C events.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20231219-topic-sm8650-upstream-wcd939x-codec-v4-3-1c3bbff2d7ab@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes:
- Lots of ASoC SOF fixes and related reworks
- ASoC TAS codec fixes including DT updates
- A few HD-audio quirks and regression fixes
- Minor fixes for aloop, oxygen and scarlett2 mixer
-----BEGIN PGP SIGNATURE-----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=h9S1
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- Lots of ASoC SOF fixes and related reworks
- ASoC TAS codec fixes including DT updates
- A few HD-audio quirks and regression fixes
- Minor fixes for aloop, oxygen and scarlett2 mixer"
* tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Enable headset mic on Lenovo M70 Gen5
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on HP ZBook
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq2xxx
ASoC: SOF: ipc4-loader: remove the CPC check warnings
ASoC: SOF: ipc4-pcm: remove log message for LLP
ALSA: hda: generic: Remove obsolete call to ledtrig_audio_get
ALSA: scarlett2: Fix yet more -Wformat-truncation warnings
ALSA: hda: Properly setup HDMI stream
ASoC: audio-graph-card2: fix index check on graph_parse_node_multi_nm()
ASoC: SOF: icp3-dtrace: Revert "Fix wrong kfree() usage"
ALSA: oxygen: Fix right channel of capture volume mixer
ALSA: aloop: Introduce a function to get if access is interleaved mode
ASoC: mediatek: sof-common: Add NULL check for normal_link string
ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link
ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing
ASoC: Intel: bxt_rt298: Fix kernel ops due to COMP_DUMMY change
ASoC: Intel: bxt_da7219_max98357a: Fix kernel ops due to COMP_DUMMY change
ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow
ASoC: codecs: rtq9128: Fix PM_RUNTIME usage
ASoC: tas2781: Add tas2563 into driver
...
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWmnFEACgkQJNaLcl1U
h9Dzvgf/RfM1g44TeC/hSX0+qdrL6QYg5wPeMWPtV4xgLqx2oqftU9eIcBLHPz03
N1hdutFFqNTR3W5GiTmyV5mLdgJpZBgkYU5dkhXCrlI7xJ6tV7Wsx86Q9ClSmEBH
Z4ZR2oAmCQIt3swshOBvwYUI6MOcG/zSqDBcRQ6t6d98TOkp2m3PPrjEYqEA2ja9
tyr73WXsdammYXZVYPu9oYoNE2Ef6Io5nkyds1F4irCcx1EXiS95cZjF3/OZ9OPP
iGpzVkXvgwb0Jbq+NsBogydsIsSAu4pyNNcu3P9Xcr1rkNqVwz1X1KYvvnSHDqdw
ZbmU6r83dCUpizpgFA4wv8irNn+aKw==
=Rr9L
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.8-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
It was a clam development cycle. There were an ALSA core extension
for subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4.
Also supports for ACPI parse for the ES83xx driver that reduces
quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes
-----BEGIN PGP SIGNATURE-----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=yVxc
-----END PGP SIGNATURE-----
Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name
-----BEGIN PGP SIGNATURE-----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=nuw0
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWbJ5EACgkQJNaLcl1U
h9CZTwf/c8CPwoKABZear8jiQpZLUhFLuGQwSShPYVZ7XPzzTMp9BwVmd40DCnUi
NeSc22t2UgT0H06nx3QK8sKOhrpQoBQVrIajf2AaxD44TJbsOYGGe4pMh1sXKAMF
c0ybp8uRgsjiv2Y++SBXZLexGC11/b8eTFLV1nTK/i2nygGjbfWSJ9s4PpB9V6cA
nZrQ/p+x/ZwaBejFUnvE06M7GHtCD6lxrB9Q1EmWA4RxcW7RNUtIN5gr16HlaMiC
3gix4mg40llhBFF9s4eBjRBNKL2paiejPZwcYkAC8w+SkZ/roXaeN55g0avmDWyW
AN9o096vaEVWKhZ/jdTHmFVf2PV2Iw==
=rbT5
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
To enable TDM mode, the current control flow limits the function
calling order should be 'set_tdm_slot->set_dai_fmt'. But not all
platform sound card like as simeple card to follow this design.
To bypass this limit, adjust the DAI format setting in runtime
'hw_param' callback.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://msgid.link/r/c4c8df00d8d179b8b5b39a8521de3a85325c57e8.1703813842.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to downloading
corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-4-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to
downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-2-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two problems with using regcache in this module.
The amplifier has 3 addressing levels (BOOK, PAGE, REG). The firmware
contains blocks that must be written to BOOK 0x8C. The regcache doesn't
know anything about BOOK, so regcache_sync writes invalid values to the
actual BOOK.
The module handles 2 or more separate amplifiers. The amplifiers have
different register values, and the module uses only one regmap/regcache
for all the amplifiers. The regcache_sync only writes the last amplifier
used.
The module successfully restores all the written register values (RC
profile, program, configuration, calibration) without regcache.
Remove regcache functions and set regmap cache_type to REGCACHE_NONE.
Link: https://lore.kernel.org/r/21a183b5a08cb23b193af78d4b1114cc59419272.1701906455.git.soyer@irl.hu/
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Acked-by: Mark Brown <broonie@kernel.org>
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/491aeed0e2eecc3b704ec856f815db21bad3ba0e.1703202126.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The GPD Win and Teclast X80 Pro both only have 1 speaker add information
about this to the components string.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5645 codec driver uses DMI quirks to configure the DMIC data-pins,
which means that it knows which DMIC interface is used on a specific
device.
ATM we duplicate this DMI matching inside the UCM profiles to select
the right DMIC interface. Add a rt5645_components() helper which the
machine-driver can use to set the components string of the card so
that UCM can get the info from the components string.
This way we only need to add new DMI quirks in one place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a rt5645_get_pdata() helper function which retreives the platform-data
and overrides it with the quirks module parameter if that is set.
This is a preparation patch for adding the rt5645_components() function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor rt5645_parse_dt(), make it take a pointer to
struct rt5645_platform_data as argument instead of passing in
the complete rt5645_priv struct.
While at it also make it void since it always succeeds.
This is a preparation patch for factoring the code to get
the platform-data out into a separate helper function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Acer Switch V 10 uses the default jack-detect mode 3, but instead of
using an analog microphone it is using a DMIC on dmic-data-pin 1,
like other models following Intel's Braswell's reference design.
Add a DMI quirk pointing to the intel_braswell_platform_data for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dmi_platform_data[] first contains a DMI entry matching:
DMI_MATCH(DMI_PRODUCT_NAME, "EF20"),
and then contains an identical entry except for the match being:
DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"),
Since these are partial (non exact) DMI matches the first match
will also match any board with "EF20EA" in their DMI product-name,
drop the second, redundant, entry.
Fixes: a4dae468cf ("ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series")
Cc: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Quite a big collection of fixes, as ever mostly in drivers. There's one
framework fix for the HDMI CODEC where it wasn't handling startup
properly for some controllers, and one new x86 quirk, but otherwise all
local fixes or dropping things we don't want to see in a release.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWC6fgACgkQJNaLcl1U
h9CKtAf9EuEl0WpcDwLiFiYOD4Vah8VfjcfUGEoZh1EtKbGrmMBheUQEYHe/wV7V
IGUA+lITq4QSnqrBZXMR+o/k7K4WegIneh30BKk6pM5Lxa61tFR2T5n2QH3aJjXd
l5cDd5x9VAc/tOFpbGKC4kTaemc5xiTw5dPRfapSowXtjiamSETBx//icDpQlgFD
j+kSq+Gzwm+s0TeiEa0Lg0VaBMUieLKHgHe++zD14c2YKbxoLq/SaaGZp1OgZlOG
Vgv8+/9EFmSf/TxOFTixJFo4cPDCYolF8OZZ5bJGdBddGde0fOLW/obKXq3onUIZ
XIsEcaIQLXluGfwl5QsMWYU3yvg5NA==
=3HlC
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.7-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
Quite a big collection of fixes, as ever mostly in drivers. There's one
framework fix for the HDMI CODEC where it wasn't handling startup
properly for some controllers, and one new x86 quirk, but otherwise all
local fixes or dropping things we don't want to see in a release.
This fixes a problem introduced while fixing ELD reporting with no jack
set.
Most driver using the hdmi-codec will call the 'plugged_cb' callback
directly when registered to report the initial state of the HDMI connector.
With the commit mentionned, this occurs before jack is ready and the
initial report is lost for platforms actually providing a jack for HDMI.
Fix this by storing the hdmi connector status regardless of jack being set
or not and report the last status when jack gets set.
With this, the initial state is reported correctly even if it is
disconnected. This was not done initially and is also a fix.
Fixes: 15be353d55 ("ASoC: hdmi-codec: register hpd callback on component probe")
Reported-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com/
Cc: Hsin-Yi Wang <hsinyi@google.com>
Tested-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20231218145655.134929-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmV2PMQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgQIAKSdjtpkv+IeDwph
umLHxDlCTT8nl+TAhEYuxSdMiHt1i7+zyF0snnHhGthBRnBZBf+PDdkQOmqtjLZj
e591VGY7tdNCAVUwmRRaI82JFz9Pl1k8DXL3f+CE1+MfbpsirAecoIAL0rsvg+4f
ICKSAOBZonL7GT7IGrsbxgqGKCLC+2PcgNT4pADBdjtbC1nmVSLK21dtWr6i4xsn
CT9MxAnej1+EOpreyHhNZUVqfQy0/04x4OY0u/EOXU3PgpfGTrAzkyfwzcd/eit0
x59TZ0owDVXfvvdXUUAC0zG1th2ek5LKNtL+C4rKOoAbq7GZoQfjN5M/Ug+yykwE
aqm6CJ8=
=tZ+R
-----END PGP SIGNATURE-----
Backmerge tag 'v6.7-rc5' into drm-next
Linux 6.7-rc5
Alex requested this for some amdkfd work relying on the symbols exports.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Whilst occasional current limiting is fine, constant current limiting
should be avoided. Add a back off system that will disable the
headphone amp, if a lot of current limiting is seen in a short window
of time.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231211160019.2034442-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Alas on some headsets the bias sense can cause problems with the
type detection. It can occasionally be falsely triggered by the type
detect itself and as the clamp is applied when this happens, it will
cause a headset to be incorrectly identified as headphones. As
such it should be disabled whilst running type detect. This does
mean a jack removal during type detect will cause a larger click
but that is unfortunately unavoidable.
Fixes: 1e4ce0d5c0 ("ASoC: cs42l43: Move headset bias sense enable earlier in process")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231211160019.2034442-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fix is based on commit [1] fixing click and pop sounds during
SoundWire port start because PA is left unmuted.
making use of new mute_unmute_on_trigger flag and removing unmute
at PA setup, removes the Click/Pop issue at SoundWire enable.
[1] 805ce81826 ("ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231211-topic-sm8x50-upstream-wsa884x-fix-plop-v1-1-0dc630a19172@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Linus Walleij <linus.walleij@linaro.org>:
This converts the remaining Wolfson ASoC codecs to
use GPIO descriptors.
These Wolfson codecs are mostly used with different
Samsung S3C (especially Cragganmore 6410) board files,
so the in-tree users are fixed up in the process.
This converts the WM8996 codec to use GPIO descriptors, an a similar
way to WM5100.
The driver is instantiating a GPIO chip named wm8996, and we get
rid of the base address for the GPIO chip from the platform data and
just use dynamic numbering. Move base and ngpio into the static
gpio_chip template.
Fix up the only in-tree user which is the Cragganmore 6410 module.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-5-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM5100 codec to use GPIO descriptors, a pretty
straight-forward conversion with the following peculiarities:
- The driver is instantiating a GPIO chip named wm5100, and the
headphone polarity detection GPIO is lifted from there. We add
this to the GPIO descriptor table as well, and we can then get
rid of also the base address for the GPIO chip from the
platform data and just use dynamic numbering.
- Fix up the only in-tree user which is the Cragganmore 6410
module.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-4-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM2200 codec to use GPIO descriptors.
This is a pretty straight-forward conversion, and it also
switches over the single in-tree user in the S3C
Cragganmore module for S3C 6410.
This coded does not seem to get selected or be selectable
through Kconfig, I had to hack another soundcard Kconfig
entry to select it for compile tests.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-3-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM1250-EV1 codec to use GPIO descriptors.
It turns out that the platform data was only used to pass some
global GPIO numbers from a board file, so we get rid of this
and also switch over the single in-tree user in the S3C
Cragganmore module for S3C 6410.
The driver obtains two GPIO lines named OSR and master and just
pull them low, we leave this behaviour as it was.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-2-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the WM0010 codec to use GPIO descriptors.
It's a pretty straight-forward conversion also switching over
the single in-tree user in the S3C Cragganmore module
for S3C 6410.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-1-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Masks the "DSP Virtual Mailbox 2 write" interrupt when before
issuing the hibernate command to the DSP. The interrupt is
unmasked when exiting runtime suspend as it is required for
DSP operation.
Without this change the DSP fires an interrupt when hibernating
causing the system spin between runtime suspend and runtime
resume.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231206160318.1255034-4-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the SYSTEM_SLEEP_PM_OPS handlers to prevent handling an IRQ
when the system is in the middle of suspending or resuming.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231206160318.1255034-3-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of the recently introduced EXPORT_GPL_DEV_PM_OPS() macro, to
conditionally export the runtime/system PM functions.
Replace the old SET_{RUNTIME,SYSTEM_SLEEP,NOIRQ_SYSTEM_SLEEP}_PM_OPS()
helpers with their modern alternatives and get rid of the now
unnecessary '__maybe_unused' annotations on all PM functions.
Additionally, use the pm_ptr() macro to fix the following errors when
building with CONFIG_PM disabled:
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231206160318.1255034-2-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A crop of fixes for v6.7, one core fix for a merge issue and a bunch of
driver specific fixes and new IDs, mostly for x86 platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVweTwACgkQJNaLcl1U
h9BJMgf8CxgAoZ0BVu6Jdzi/ZTL6030unqDcCjI4gNehXa9dDCpxvbAEItNOi6Ta
OBQrXGLgf4esYw2jOjs0yO4SGIW3Wtz3EVyWL66wAZhBPzowxXSlDHQC73sgB96d
5zuXXk3juWnr4zn+c/aFT5Q0kNlrcXN20mu2aBPJV4+8lcvEIC15WHQu0fFQ7mHJ
mBOPpWpVypihb5Si2M0e0/5UepotWK7fv5U23dT7wbJfvGWoDDRYsnx0Ipw2yYBt
gbnOtWlpAkxZo50BdpWrW5QsKx6KFFeYtldRd6gKfXkPefawCk+JGbzLckECA0E7
v9qBHoYmubA/jLPYqou4XTH4S4sITg==
=AlC1
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.7-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
A crop of fixes for v6.7, one core fix for a merge issue and a bunch of
driver specific fixes and new IDs, mostly for x86 platforms.
There is a spelling mistake in a dev_err_probe error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231205101740.2820813-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT722 SDCA codec supports 3 data lanes,
lane_control_support property has to be
set to use additional two lanes.
Reviewed-by: Jack Yu <jack580304@gmail.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204213721.197785-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the ES83xx codec configuration is exposed in the DSDT table
and accessible via a _DSM method. Start adding basic definitions and
helpers to dump the information.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When wm_adsp_buffer_read() fails, we should free buf->regions.
Otherwise, the callers of wm_adsp_buffer_populate() will
directly free buf on failure, which makes buf->regions a leaked
memory.
Fixes: a792af69b0 ("ASoC: wm_adsp: Refactor compress stream initialisation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO API <linux/gpio.h> but
does not use any symbols from it.
Drop the include.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-10-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-9-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO API <linux/gpio.h> but
does not use any symbols from it.
Drop the include.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-8-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the Cirrus CS4271 ASoC codec driver to use
GPIO descriptors.
It turns out that there are two in-kernel users of the platform
data passing mechanism so these are switched over as well.
One locally defined GPIO "gpio_disabled" is declared in the
state struct but completely unused in the driver, so we delete
it.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-6-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-5-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-4-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Further the driver is requesting "reset-gpios" rather than
just "reset" from the GPIO framework. This is wrong because
the gpiolib core will add "-gpios" before processing the
request from e.g. device tree. Drop the suffix.
The last problem means that the optional RESET GPIO has
never been properly retrieved and used even if it existed,
but nobody noticed.
Fixes: c1124c09e1 ("ASoC: cs35l34: Initial commit of the cs35l34 CODEC driver.")
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-3-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Further the driver is requesting "reset-gpios" rather than
just "reset" from the GPIO framework. This is wrong because
the gpiolib core will add "-gpios" before processing the
request from e.g. device tree. Drop the suffix.
The last problem means that the optional RESET GPIO has
never been properly retrieved and used even if it existed,
but nobody noticed.
Fixes: 3333cb7187 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-2-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO API <linux/gpio.h> but
does not use any symbols from it.
Drop the include.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-1-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The current driver is registering the same dais for each hdev found in the
system which results duplicated widgets to be registered and the kernel
log contains similar prints:
snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
To avoid such issue, split the dai array into HDMI and non HDMI array and
register them conditionally:
for HDMI hdev only register the dais needed for HDMI
for non HDMI hdev do not register the HDMI dais.
Depends-on: 3d1dc8b103 ("ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available")
Link: https://github.com/thesofproject/linux/issues/4509
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231128123914.3986-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The -1 value for active_decimator[dai_id] is considered as "not set",
but at probe the table is initialized a 0, this prevents enabling the
DEC0 Mixer since it will be considered as already set.
Initialize the table entries as -1 to fix tx_macro_tx_mixer_put().
Fixes: 1c6a7f5250 ("ASoC: codecs: tx-macro: fix active_decimator array")
Fixes: c1057a08af ("ASoC: codecs: tx-macro: fix kcontrol put")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231116-topic-sm8x50-upstream-tx-macro-fix-active-decimator-set-v1-1-6edf402f4b6f@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To provide option for selecting different bit-per-sample than just the
maximum one, use the new format calculation mechanism.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-11-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To provide option for selecting different bit-per-sample than just the
maximum one, use the new format calculation mechanism.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-10-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To provide option for selecting different bit-per-sample than just the
maximum one, use the new format calculation mechanism.
While at it, complete PCM stream initialization with subformat options.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-9-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update mechanism for querying supported PCMs to allow for granular
format selection when container size is 32 bits. Currently always the
highest bit depth is selected, regardless of how many actual formats
codec in question supports.
Acked-by: Mark Brown <broonie@kernel.org>
Co-developed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20231117120610.1755254-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a polling mechanism that will keep the driver operational even in
absence of physical IRQ connection. If IRQ line is detected, the driver
will continue working as usual, in case of missing IRQ line it will
fallback to the polling mechanism introduced in this change.
This will support users which choose not to connect an IRQ line as it
is not critical to part's operation.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231123090658.10418-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the jd_mutex to protect the jack detection control flow.
And only the headset type could check the button status.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:
sound/soc/codecs/nau8810.c:183:25: sparse: warning: incorrect type in assignment
sound/soc/codecs/nau8810.c:183:25: sparse: expected int
sound/soc/codecs/nau8810.c:183:25: sparse: got restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
This issue is not still actively checked by kernel test robot.
Actually, it is same with nau8822's sparse warnings issue.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231120084227.1766633-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some older laptops using cs35l41 use firmware which does not support
the CSPL_MBOX_CMD_SPK_OUT_ENABLE command.
Firmware versions v0.28.0 and older do not support this command.
Fixes: fa3efcc36a ("ALSA: cs35l41: Use mbox command to enable speaker output for external boost")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117163609.823627-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Maciej Strozek <mstrozek@opensource.cirrus.com>:
This patchset aims to add minor fixes (first two patches) and
introduce general improvements to the driver (rest of the patches)
Make sure these inputs are mutually exclusive as recommended by the
datasheet
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-8-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:
sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment
sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short
sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Bit 6 of INPPGA (INPPGAMUTE) does not control the Aux path, it controls
the input PGA path, as can been seen from Figure 8 Input Boost Stage in
the datasheet. Update the naming of things in the driver to match this
and update the routing to also reflect this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231113155916.1741027-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Zhu Ning <zhuning0077@gmail.com>:
We developed a new version of the chip. 3 Three patches are used for
compatibility with the old and new versions of the chip.We did tests
with the new driver at version_v0 and version_v3.The test results
from the test department met our expectations.Both versions work well
with the new drivers.
Modify the aw88395_lib file so that the bin file
parsing is no longer related to the chip id of the chip.
Adopt the bin file data type "prof_data_type" as the
differentiation between different chip bin file
parsing methods.
Since the chip id macro for the aw88399 is no longer
defined in aw88395_reg.h, define the chip id
for the aw88399 in aw88399.h
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231109093708.13155-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old headset detection time is not enough for the new chip version.
An error occurs with the old detection time.According to tests,
400ms is the best detection time that does not trigger an error.
The delay time after the trigger is reduced by 300ms to
keep the whole detection time unchanged.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20231101072702.91316-4-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New chip versions require new initialisation and playback processes.
Changing the initialisation and playback process for better results.
The old chip versions are going to work well with the new sequences.
We've tested this with version_v0 and version_v3 chips
under the new sequence and they both pass.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20231101072702.91316-3-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new chip version requires the addition of a new clock table.
We determine which clock table to choose based on the version.
Newer versions of the chip have fewer processes to go through
in the headset detection, so the version flag is used to skip them.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20231101072702.91316-2-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One additional driver fix that came in during the merge window.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVMwUQACgkQJNaLcl1U
h9Aizgf/bz/+UOKjILeQ4MJz+gLEgEza5SfzyMw+zVgDjSD7a+LhwI26869s74E8
F1a0zwdnlfHt2T4Y/ouJBJ/kDPCIj6kgYdYjMTTBzu5ui/Pp7QHbDzUu+zGMo4SH
c5N8NThgh9lGLf+AFIEh7whXSO1LzNVgZDaK2X1zxHNF5MHkAi/pOFP2wL+zohuW
eGJ9EylRFzcHAjcOCJbCoJWn+KKJDIiPUN1wNRC166Ps1LPwwy7KT/AyTo2PwyPe
79apcQro1C8BoovOZyxbLahX+RdF31tcsn9jQL6gYsQx0LqoVl0rY8cZtZtn1auv
PWF517IyAlEfYUF8dD2Ht6kCZpFxZw==
=WDw2
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.7-merge-window-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: One more fix for the merge window
One additional driver fix that came in during the merge window.
A collection of fixes that have come in during the merge window, the
majority of this is driver specific with one core fix for handling of
DAPM clock widgets when a name prefix is specified for the card - the
name should not be applied to the clock name we request from the clock
API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVLuWYACgkQJNaLcl1U
h9D0OQf/dauiR5PdVTxXdxxNB3qygA8MVOIqyVv0D0FzjjffuVvVhr1c0gkiIa+R
isO8esWr7iM+aM0/Z5XleAFckTWLSi9gPQ+NvRQKGCLUh/MRBVIFkJnBvLx6frRE
h6Ax9duai1RZfs+uqOMfUlQFN13y2ew4dn64vHZNu4f/Lqaskh4hrB4bn9jQhM9I
bnmaCo9DvecS1TlJrewF1Ie2cvfR1DM87IvvkfaRtP2hW7oerURYm7myWitu/fr+
Hlpj9BxTLhbJlFR13kGtm+HNXsWyLjO4NdAVUxC6aMHCQ4vfTy61ojfq4CZKYN0J
ZpRoeG+4mP/WjqqaaN7hJq/USw4BxQ==
=iZZQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.7-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
A collection of fixes that have come in during the merge window, the
majority of this is driver specific with one core fix for handling of
DAPM clock widgets when a name prefix is specified for the card - the
name should not be applied to the clock name we request from the clock
API.
Reading the peak data to detect abnormal data in the ADC channel.
If abnormal data occurs, the driver takes recovery actions to
refresh the ADC channel.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231108061658.1265065-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDMI hotplug callback to the hdmi-codec is currently registered when
jack is set.
The hotplug not only serves to report the ASoC jack state but also to get
the ELD. It should be registered when the component probes instead, so it
does not depend on the card driver registering a jack for the HDMI to
properly report the ELD.
Fixes: 25ce4f2b35 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20231106104013.704356-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from wangweidong.a@awinic.com:
The maximum value that calib can set should be
consistent with the maximum value of re.
An error code should be return when the re is greater
than the maximum value or less than the minimum value
The value of vsense_select should be either 32
or 0 in both cases, so modify the
AW88399_DEV_VDSEL_VSENSE macro to 32.
When DA7219 is suspended, prevent the AAD IRQ handler is unexpectedly
executed and cause the I2C driver "Transfer while suspended" failure.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231101022507.6226-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The value of vsense_select should be either 32
or 0 in both cases, so modify the
AW88399_DEV_VDSEL_VSENSE macro to 32.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231101090211.177125-4-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmU/rAQACgkQJNaLcl1U
h9AXVwf/SwWrxTus3+O2hS5rwusjqQBn1t2mzlnxsYNVCYGBcjOpMGL4HrJzn++e
DJXoMyWis5FNKFWyPtKMGE1kZYdUUE/g7LpZOBew4P47nBv6SQWRvUxPfoq8mdOg
Xb4+kjBzTq1dhwZnZPvNdsknvM7cLfx/lyo2vUJR4peDL0rzgnx72fhRZAjzh2OH
CSz69aTjpliqikp+V7JVFYf2yma2LjTOCL2saiIF/PcxsqUUa73XTggg610EPY+R
pOFb2MBRDbZuJrETbaiytLwtcPuvrpiHRHhxuClsjHGVTDbGfE7GzePS+yUu66y9
LO8oAl7kJebw+WWffIOoL2IjXcG9tA==
=nn11
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.7
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
Clang warns (or errors with CONFIG_WERROR=y):
sound/soc/codecs/aw88399.c:441:18: error: variable 'vsense_select' is uninitialized when used here [-Werror,-Wuninitialized]
441 | vsense_select = vsense_select & (~AW88399_VDSEL_MASK);
| ^~~~~~~~~~~~~
sound/soc/codecs/aw88399.c:431:28: note: initialize the variable 'vsense_select' to silence this warning
431 | unsigned int vsense_select, vsense_value;
| ^
| = 0
1 error generated.
This clearly should have been using the value received from
regmap_read(). Use the correct variable to resolve the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1952
Fixes: 8ade6cc7e2 ("ASoC: codecs: Add aw88399 amplifier driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231027-asoc-aw88399-fix-wuninitialized-v1-1-b1044493e4cd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes the codec probe would be called earlier than the hardware initialization.
Therefore, the speaker route should be added before the the first_hw_init check.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Fixes: f3da2ed110 ("ASoC: rt1712-sdca: enable pm_runtime in probe, keep status as 'suspended'")?
Link: https://lore.kernel.org/r/20231030103644.1787948-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the current setup the PA is left unmuted even when the
Soundwire ports are not started streaming. This can lead to click
and pop sounds during start.
There is a same issue in the reverse order where in the PA is
left unmute even after the data stream is stopped, the time
between data stream stopping and port closing is long enough
to accumulate DC on the line resulting in Click/Pop noise
during end of stream.
making use of new mute_unmute_on_trigger flag is helping a
lot with this Click/Pop issues reported on this Codec
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The aw88395_lib module is shared by all the aw883* drivers that
need to select the corresponding Kconfig symbol. The newly added
aw88399 incorrectly selects SND_SOC_AW88399_LIB instead, which
is not defined anywhere in the kernel, causing a link failure when
the actual one is missing:
arm-linux-gnueabi-ld: sound/soc/codecs/aw88399.o: in function `aw88399_codec_probe':
aw88399.c:(.text+0xbc6): undefined reference to `aw88395_dev_load_acf_check'
arm-linux-gnueabi-ld: aw88399.c:(.text+0xbea): undefined reference to `aw88395_dev_cfg_load'
Fixes: 8ade6cc7e2 ("ASoC: codecs: Add aw88399 amplifier driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231027152403.386257-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Some codec drivers compare widget names with strcmp, ignoring
the component name prefix. If prefix is used, the comparisons start failing.
Except Qualcomm lpass-rx-macro, none of the patches were tested
on hardware.
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88399 property to the awinic,aw88395.yaml file.
Add i2c and amplifier registration for
aw88399 and their associated operation functions.
The existing code checks for the correct state transition after sending
a command. However, it is possible for the message box to return -1,
which indicates an error, if an error has occurred in the firmware.
We can detect if the error has occurred, and return a different error.
In addition, there is no recovering from a CSPL error, so the retry
mechanism is not needed in this case, and we can return immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026150558.2105827-9-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To ensure the chip has correctly reset during probe and system suspend,
we need to force a software reset, in case of systems where the
hardware reset is not available.
The software reset register was labelled as volatile but not readable,
however, it is readable, (just returns 0x0). Adding it to readable
registers means it will be correctly treated as volatile, and thus
will not be cached.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231023095428.166563-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231023095428.166563-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231023095428.166563-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231023095428.166563-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231023095428.166563-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names,
to include also the component's name prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231023095428.166563-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_driver array in wcd938x driver has two entries whose order
must match order of wcd938x->sdw_priv array. The wcd938x_bind() and
wcd938x_codec_set_sdw_stream() rely on this order. wcd938x->sdw_priv
array is indexed by enum with AIF1_PB and AIF1_CAP, so use the same
defines instead of raw numners for snd_soc_dai_driver array.
No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231019144108.42853-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add aw88399 compatible code to the aw88395_lib.c file
so that it can parse aw88399's bin file.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231025112625.959587-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable d_len_code is being initialized to zero and then re-assigned a
different value in all the valid cases in the following switch statement.
The only place it is not being assigned a value is on the return for
a default case and in this case it does not need to be assigned. The
initialization is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231023154917.671595-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
This is another series to convert ASoC drivers to use struct
platform_driver:remove_new(). The rockchip one was already send before
but with a wrong subject prefix, the cs42l43 driver is newer than the
last series. The remaining five patches are for driver combos that my
coccinelle patch failed to detect before.
I have a board (RK3588 based) that sets the sysclk to 12287999. The
es8328 driver fails to match this to the 12288000 rate and fails to
load. Allow the rate comparison to work if the frequency is within
100hz by dividing it by 100 and rounding it, then multiplying it back
by 100.
Note the 100hz value was chosen arbitrarily by me, but it has only
been tested with a 1hz difference.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231020171539.65513-1-macroalpha82@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231013221945.1489203-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUy6X8ACgkQJNaLcl1U
h9Cv7Qf+PO4ucl/rFITWAp2Ta9fw7Z5J6UCiXiR54TPgAiLJrpKSi3rbYTXjO90Y
1NNOdoMKr109zdOpdSZI7EX0GgWQbGbdB40nxESdTcojAloRH0jt4RaF7G7B7+86
b8PGlVPLLV/4zFf9f2gpEKPcKhRRRKYOBIEB+amfjWpdXVrqPD3zS/S16Q3Hn4Gy
Fx9b9X/lVDG9uqJomHpunEdViZjkm5CCNzdyAhHH99afiqSe//pevx6/FpzAHyng
AZgE9Yfq4Xw4pdzDdGVfYC+L1GZiHIDRzsusz6aPA5nrMhSn0ru8PMGtmQQTzyhb
PLYw0OW8cWymfqwal8wrNGJfSZ8IGA==
=lN5P
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.7
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
[ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec
drivers are resolved here -- tiwai ]
Enable Gnd switch to improve stability when Jack insert event
occurs, and then disable Gnd switch after Jack type detection
is finished.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231017021258.5929-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() and size_sub() helpers, instead of the
open-coded version, to calculate the size for the allocation of the
whole flexible structure, including of course, the flexible-array
member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZSRvh1j2MVVhuOUv@work
Signed-off-by: Mark Brown <broonie@kernel.org>
"Failed to set private value: ffffffea <= 6100000 24832" is confusing.
It should be "Failed to set private value: 6100000 <= 24832 -22"
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012191315.145411-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"Failed to set private value: ffffffea <= 6100000 24832" is confusing.
It should be "Failed to set private value: 6100000 <= 24832 -22"
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012191315.145411-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The call to gpiod_set_value_cansleep() in cs42l42_sdw_update_status()
needs the header file gpio/consumer.h to be included.
This was introduced by commit 2d066c6a78 ("ASoC: cs42l42: Avoid stale
SoundWire ATTACH after hard reset")
and caused error:
sound/soc/codecs/cs42l42-sdw.c:374:4: error: implicit declaration of
function ‘gpiod_set_value_cansleep’;
did you mean gpio_set_value_cansleep’?
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2d066c6a78 ("ASoC: cs42l42: Avoid stale SoundWire ATTACH after hard reset")
Link: https://lore.kernel.org/r/20231011134853.20059-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to an error in the datasheet the bias sense values currently don't
match the hardware. Whilst this is a change to the binding no devices
have yet shipped so updating the binding will not cause any issues.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231010102425.3662364-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Rob Herring <robh@kernel.org>:
This is a series is part of ongoing clean-ups related to device
matching and DT related implicit includes. Essentially of_device.h has
a bunch of implicit includes and generally isn't needed any nore except
for of_match_device(). As we also generally want to get rid of
of_match_device() as well, I've done that so we're not updating the
includes twice.
The ASP1 DOUT line must be defaulted to be high-impedance when
it is not actually transmitting data for an active channel.
In non-SoundWire modes ASP1 will usually be shared by multiple
amps so each amp must only drive the line during the slot for
an enabled TX channel.
In SoundWire mode a custom firmware can use ASP1 as a secondary
chip-to-chip audio link or as GPIO. It should be defaulted to
high-impedance since by default the purpose of this pin is not
known.
Backport note:
On kernel versions before 6.6 the cs35l56->base.regmap argument
to regmap_set_bits() must be changed to cs35l56->regmap.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://lore.kernel.org/r/20231009153412.30380-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Some codec drivers compare widget names with strcmp, ignoring the component
name prefix. If prefix is used, the comparisons start failing.
Add a helper to fix the issue.
Merge series from Johan Hovold <johan+linaro@kernel.org>:
The wcd938x codec driver happily ignores error handling, something which
has bitten us in the past when we hit a probe deferral:
https://lore.kernel.org/lkml/20230705123018.30903-1-johan+linaro@kernel.org/
Fix up the remaining probe and component bind paths that left resources
allocated and registered after errors to avoid similar future issues.
Driver compares widget name in wsa_macro_spk_boost_event() widget event
callback, however it does not handle component's name prefix. This
leads to using uninitialized stack variables as registers and register
values. Handle gracefully such case.
Fixes: 2c4066e5d4 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155422.801160-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use preferred i2c_get_match_data() instead of of_match_device() and
i2c_match_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Avoid using 0 for enum da7218_dev_id so that no match data can be
distinguished.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-3-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If probe is reached, we've already matched the device and in the case of
DT matching, the struct device_node pointer will be set. Therefore, there
is no need to call of_match_device() in probe.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-2-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cs35l56_patch() to call reinit_completion() to reinitialize
the completion object.
It was incorrectly using init_completion().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://lore.kernel.org/r/20231006164405.253796-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to balance the runtime PM operations, including the disable
count, on probe errors and on driver unbind.
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-8-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to deregister the component when the driver is being unbound
and before the underlying device-managed resources are freed.
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-7-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to balance the runtime PM operations, including the disable
count, on driver unbind.
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-6-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to disable and free the regulators on probe errors and on
driver unbind.
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-5-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing code to release resources on bind errors, including the
references taken by wcd938x_sdw_device_get() which also need to be
dropped on unbind().
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to deregister the component before tearing down the resources
it depends on during unbind().
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the bogus error handling for a soundwire device backcast during
bind() that cannot fail.
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When comparing widget names in wsa_macro_spk_boost_event(), consider
also the component's name prefix. Otherwise the WSA codec won't have
proper mixer setup resulting in no sound playback through speakers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231003155710.821315-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Hibernation can be enabled on SPI-connected devices now that
the hibernate and wake sequences have been updated to work
with wake-on-MOSI.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This can now be re-enabled as the sequence to reliably wake the device
has been implemented in the shared code.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As the dummy wake is a toggling signal (either I2C or SPI activity) it
is not guaranteed to meet the minimum asserted hold time for a wake
signal. In this case the wake must guarantee rising edges separated by
at least the minimum hold time.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the hardware uses SPI_MOSI, I2C_SCL or I2C_SDA as the wake source
the bus activity of sending HIBERNATE_NOW will wake up the amps that
were already put into hibernate.
ALLOW_AUTO_HIBERNATE tells the firmware to hibernate itself after a
timeout of a few seconds, giving the driver instances time to send this
before any amps have gone into hibernate.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
read_poll_timeout() is a macro and val will be populated before use,
however some static analysis tools treat it as a function and warn of
uninitialised variable usage.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231004144203.151775-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Luca Weiss <luca.weiss@fairphone.com>:
The AW88261 chip doesn't have a reset gpio, so remove it from the
bindings and from the driver.
Enables the existing pcm512x driver to control the almost
compatible TAS5754 and -76 amplifers. Both amplifiers support
only an I2C interface and the internal PLL must be always
on to provide necessary clocks to the amplifier section.
Tested on TAS5756 with support from Andreas Arbesser-Krasser
from Texas Instruments <a-krasser@ti.com>
Signed-off-by: Joerg Schambacher <joerg.hifiberry@gmail.com>
Link: https://lore.kernel.org/r/20230929150722.405415-1-joerg.hifiberry@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the AW88261 datasheet (V1.1) and device schematics I have
access to, there is no reset gpio present on the AW88261. Remove it.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231002-aw88261-reset-v2-2-837cb1e7b95c@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The micbias setting for tlv320adc can also have the value '3' which
means that the micbias ouput pin is connected to the input pin AVDD.
Signed-off-by: Antoine Gennart <gennartan@disroot.org>
Link: https://lore.kernel.org/r/20230929130117.77661-1-gennartan@disroot.org
Signed-off-by: Mark Brown <broonie@kernel.org>
fixed m68k compiling issue: mapping table can save code field; storing the
dev_idx as a member of block can reduce unnecessary time and system
resource comsumption of dev_idx mapping every time the block data writing
to the dsp.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20231002090434.1896-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will attempt to disable the regulators if the initial enable fails
which is a bug.
Fix this bug by modifying the code to the correct sequence.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_4F37C9B5315B7960041E8E0ADDA869128F08@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4e08713336 ("ASoC: hdmi-codec: fix channel info for
compressed formats") accidentally changed hcp->chmap_idx from
ca_id, the CEA channel allocation ID, to idx, the index to
the table of channel mappings ordered by preference.
This resulted in wrong channel maps being reported to userspace,
eg for 5.1 "FL,FR,LFE,FC" was reported instead of the expected
"FL,FR,LFE,FC,RL,RR":
~ # speaker-test -c 6 -t sine
...
0 - Front Left
3 - Front Center
1 - Front Right
2 - LFE
4 - Unknown
5 - Unknown
~ # amixer cget iface=PCM,name='Playback Channel Map' | grep ': values'
: values=3,4,8,7,0,0,0,0
Switch this back to ca_id in case of PCM audio so the correct channel
map is reported again and set it to HDMI_CODEC_CHMAP_IDX_UNKNOWN in
case of non-PCM audio so the PCM channel map control returns "Unknown"
channels (value 0).
Fixes: 4e08713336 ("ASoC: hdmi-codec: fix channel info for compressed formats")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20230929195027.97136-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from wangweidong.a@awinic.com:
The awinic aw87390 is a new high efficiency, low noise,
constant large volume, 6th Smart K audio amplifier.
Merge series from cy_huang@richtek.com:
This patch series create a TDM source select property and use it to
decide which TDM data source is connected.
Following by the below patch disccuion
https://lore.kernel.org/lkml/1695780376-32301-1-git-send-email-cy_huang@richtek.com/#t
It may not be a good choice to add the user controlable mixer control
item. Since it follows the board design, make it as a device property.
Change the transmission mode of the "aw88395_dev_get_prof_name"
function parameter, Instead of using return values for data
transfer, parameters are used
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230928105727.47273-6-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename "sound-channel" to "awinic,audio-channel",
this is to be consistent with the "awinic,aw88395.yaml" file
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230928105727.47273-5-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The assignment of the else and if branches is the same, so the else
here is redundant, so we remove it.
./sound/soc/codecs/cs42l43-sdw.c:35:1-3: WARNING: possible condition with no effect (if == else).
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6712
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230928085200.48635-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()), but there
is no particular reason about that [1].
To reduce confusing, standarding these to snd_soc_xxx() is sensible.
This patch adds asoc_xxx() macro to keep compatible for a while.
It will be removed if all drivers were switched to new style.
Link: https://lore.kernel.org/r/87h6td3hus.wl-kuninori.morimoto.gx@renesas.com [1]
"io-channel-names" is expected to have few values, so there is no real
point to allocate audio_iio_aux_chan structure with a dedicate memory
allocation.
Using a flexible array for struct audio_iio_aux->chans avoids the
overhead of an additional, managed, memory allocation.
This also saves an indirection when the array is accessed.
Finally, __counted_by() can be used for run-time bounds checking if
configured and supported by the compiler.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/1c0090aaf49504eaeaff5e7dd119fd37173290b5.1695540940.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wmwwp8v3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1hcp8v8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zg1sp8vd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from cy_huang@richtek.com:
This patch series adds Richtek rtq9128 automotive audio amplifier
support. It can deliver up to 4x75W into 4Ohm speaker from a 25V
supply in automotive applications.
The array size is irrelevant with SNDRV_CARDS. dev_index is from
codec address and the available codec number is HDA_MAX_CODECS.
Also, hda_pvt->fw is for a temporary use, no need to add a new extra
field in hdac_hda_priv{}.
Fixes: 842a62a75e ("ASoC: hdac_hda: add HDA patch loader support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230921064317.2120452-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Some small updates to the driver defaults to ensure a good pop
performance on jack insert and removal.
HDA patch loader is supported by legacy HDA driver. Implement it on
ASoC HDA driver, too.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230919083209.1919921-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For very slow removals the current bias sense timeout is sometimes too
short and unclamps the mic bias before the jack removal is properly
detected by the tip detect, causing a pop. As bias sense should be
tuned to deliver very few false positives, increase the timeout fairly
dramatically to cover all but the most exaggerated removals.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230919103116.580305-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the bias sense is enabled along with the button detect, but
this has two problems. Firstly, the detections themselves arn't covered
by the bias sense, potentially resulting in pops and secondly, the
sequence of enabling/disabling looks like:
enable bias
enable bias sense
disable bias sense
disable bias
When the bias sense is disabled but the bias is still on the clamp is
removed and a pop results. Fix both of these issues by moving the bias
sense enable/disable to be along with the bias itself. With a resulting
sequence of:
enable bias sense
enable bias
disable bias
disable bias sense
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230919103116.580305-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current default is a little excessive, reduce the pop on insertion
by reducing the time a little. The new value of 1000uS is still pretty
conservative.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230919103116.580305-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
da7213 is still using M/S instead of P/C for SND_SOC_DAIFMT_CBx_CFx.
[PATCH 1/2] will update it.
[PATCH 2/2] will enable DAI format automatic select.
By this patch, DAI format might be automatically selected
(Depends on paired DAI, and/or Sound Card).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Linh Phung <linh.phung.jy@renesas.com>
Tested-by: Khanh Le <khanh.le.xr@renesas.com>
Link: https://lore.kernel.org/r/87y1hdh4f1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use P/C instead of M/S for SND_SOC_DAIFMT_CBx_CFx.
We should use SND_SOC_DAIFMT_xxx instead of SND_SOC_DAI_FORMAT_xxx
This patch tidyup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zg1th4f8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm8782 supports rates 96kHz and 192kHz as long as the hardware
is configured properly. Allow this to be specified in the device tree.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918131532.2257615-3-contact@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm8782 supports up to 192kHz audio when pins are set correctly.
Instead of hardcoding which rates are supported constrain them at
runtime based on a max_rate variable.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918131532.2257615-2-contact@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the const array controls on the stack, instead make it
static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230915092639.31074-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These 3 patches update the pm_ops for I2C/SPI so that they are only built
and exported if they are needed.
The microphone and speaker shutters on cs42l43 can be configured to
trigger from the same GPIO, in this case the current code returns an
error as we attempt to request two IRQ handlers for the same IRQ. Fix
this by always requesting the shutter IRQs with the IRQF_SHARED flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230915144300.120100-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a control that there are four options to control the digital volume output.
The user could select "immediate" to make volume updates immediately.
In default, the driver selects the volume update with "zero detection + soft inc/dec change".
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230915020530.83452-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l56_pm_ops_i2c_spi struct is only needed if either the
I2C or SPI modules are selected for building. Otherwise it would
be unused bytes, so in that case omit it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230914150918.14505-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pm_ptr() when setting the pointer to the dev_pm_ops so that it
will be NULL if CONFIG_PM is disabled. This allows the dev_pm_ops to be
compiled out in that case.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230914150918.14505-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
These patches fix 3 problems with hard reset:
1. Ensure a minimum reset pulse width
2. Deal with ACPI overriding the requested default GPIO state
3. Avoid a race condition when hard-resetting a SoundWire peripheral
that is already enumerated
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
The PCI device registers contain a subsystem ID (SSID), that is
separate from the silicon ID. The PCI specification defines it thus:
"They provide a mechanism for board vendors to distiguish their
boards from one another even thought the boards may have the same
PCI controller on them."
This allows the driver for the silicon part to apply board-speficic
settings based on this SSID.
The CS35L56 driver uses this to select the correct firmware file for
the board. The actual ID is part of the PCI register set of the
host audio interface so this set of patches includes extracting the
SSID from the Intel audio controller and passing it to the machine
driver and then to ASoC components. Other PCI audio controllers
will have the same SSID registers, so can use the same mechanism to
pass the SSID.
The patch helps save power by control MICBIAS. The headset's
MICBIAS should be disabled without button requirement.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20230913064003.2925997-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
wm_adsp_read_ctl() and wm_adsp_write_ctl() must hold the cs_dsp pwr_lock
mutex when calling cs_dsp_coeff_read_ctrl() and cs_dsp_coeff_write_ctrl().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913160250.3700346-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In SoundWire mode leave hard RESET asserted when exiting probe,
and wait for an UNATTACHED notification before deasserting RESET.
If the boot state of the reset GPIO was deasserted it is possible
that the SoundWire core had already enumerated the CS42L42 before
cs42l42_sdw_probe() is called. When cs42l42_common_probe() hard
resets the CS42L42 it triggers a race condition:
1) After cs42l42_sdw_probe() returns the thread that called it
will call cs42l42_sdw_update_status() to report the last
status recorded by the SoundWire core.
2) The SoundWire bus master will see a PING with the CS42L42
now reporting as unenumerated and will trigger the core
SoundWire code to start enumerating CS42L42.
These two threads are racing against each other. If (1)
happens before (2) a stale ATTACHED notification will be
reported to the cs42l42 driver when in fact the status of
cs42l42 is now unattached.
To avoid this race condition:
- Leave RESET asserted on exit from cs42l42_sdw_probe().
This ensures that an UNATTACHED notification must be
sent to the cs42l42 driver. If cs42l42 was already
enumerated it will be seen to drop off the bus, causing
an UNATTACH notification. If it was never enumerated the
status is already UNATTACHED and this will be reported
by thread (1).
- When the UNATTACH notification is received, release RESET.
This will cause CS42L42 to be enumerated and eventually
report an ATTACHED notification.
- The ATTACHED notification is now valid.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913150012.604775-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI setting for a GPIO default state has higher priority than the
flag passed to devm_gpiod_get_optional() so ACPI can override the
GPIOD_OUT_LOW. Explicitly set the GPIO low when hard resetting.
Although GPIOD_OUT_LOW can't be relied on this doesn't seem like a
reason to stop passing it to devm_gpiod_get_optional(). So we still pass
it to state our intent, but can deal with it having no effect.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913150012.604775-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L42 can accept very short reset pulses of a few microseconds
but there's no reason to force a very short pulse.
Allow a wide range for the usleep_range() so it can be relaxed about
the choice of timing source.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913150012.604775-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to use temporary strings to construct the kcontrol names,
devm_kasprintf can be used to replace the snprintf + devm_kstrdup pairs.
This change will also fixes the following compiler warning/error (W=1):
sound/soc/codecs/hdac_hdmi.c: In function ‘hdac_hdmi_jack_port_init’:
sound/soc/codecs/hdac_hdmi.c:1793:63: error: ‘ Switch’ directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
1793 | snprintf(kc_name, sizeof(kc_name), "%s Switch", xname);
| ^~~~~~~
In function ‘create_fill_jack_kcontrols’,
inlined from ‘hdac_hdmi_jack_port_init’ at sound/soc/codecs/hdac_hdmi.c:1871:8:
sound/soc/codecs/hdac_hdmi.c:1793:25: note: ‘snprintf’ output between 8 and 39 bytes into a destination of size 32
1793 | snprintf(kc_name, sizeof(kc_name), "%s Switch", xname);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97d ("extrawarn: enable format and stringop overflow warnings in W=1")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230913091325.16877-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Hans de Goede <hdegoede@redhat.com>:
The recent(ish) rt5640 changes to add HDA header jack-detect support
and the related suspend/resume handling fixes have introduced several
issues with IRQ handling on boards not using the HDA header jack-detect
support.
This series fixes these issues, see the individual commit messages
for details.
If the driver properties do not define a cirrus,firmware-uid try to get the
PCI SSID as the UID.
On PCI-based systems the PCI SSID is used to uniquely identify the specific
sound hardware. This is the standard mechanism for x86 systems and is the
way to get a unique system identifier for systems that use the CS35L56 on
SoundWire.
For non-SoundWire systems there is no Windows equivalent of the ASoC driver
in I2C/SPI mode. These would be:
1. HDA systems, which are handled by the HDA subsystem.
2. Linux-specific systems.
3. Composite devices where the cs35l56 is not present in ACPI and is
configured using software nodes.
Case 2 can use the firmware-uid property, though the PCI SSID is supported
as an alternative, as it is the standard PCI mechanism.
Case 3 is a SoundWire system where some other codec is the SoundWire bridge
device and CS35L56 is not listed in ACPI. As these are SoundWire systems
they will normally use the PCI SSID.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not allow the CS35L56 to be put into its lowest power
"hibernation" mode. This only affects I2C because "hibernation"
is already disabled on SPI and SoundWire.
Recent firmwares need a different wake-up sequence. Until
that sequence has been specified, the chip "hibernation" mode
must be disabled otherwise it can intermittently fail to wake.
THIS WILL NOT APPLY CLEANLY TO 6.5 AND EARLIER:
We will send a separate backport patch to stable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230912133841.3480466-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If jack-detection is not used; or has already been disabled then
there is no need to call rt5640_cancel_work().
Move the rt5640_cancel_work() inside the "if (rt5640->jack) {}" block,
grouping it together with the disabling of the IRQ which queues the work
in the first place.
This also makes suspend() symetrical with resume() which re-queues the work
in an "if (rt5640->jack) {}" block.
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set "rt5640->irq_requested = true" after a successful request_irq()
in rt5640_enable_hda_jack_detect(), so that rt5640_disable_jack_detect()
properly frees the IRQ.
This fixes the IRQ not being freed on rmmod / driver unbind.
Fixes: 2b9c8d2b3c ("ASoC: rt5640: Add the HDA header support")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The jack-detect IRQ should be enabled *after* the jack-detect related
configuration registers have been programmed.
Move the enable_irq() call for this to after the register setup.
Fixes: 5fabcc90e7 ("ASoC: rt5640: Fix Jack work after system suspend")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When jack-detect was originally added disabling the IRQ during suspend
was done by the sound/soc/intel/boards/bytcr_rt5640.c driver
calling snd_soc_component_set_jack(NULL) on suspend, which calls
rt5640_disable_jack_detect(), which calls free_irq() which also
disables it.
Commit 5fabcc90e7 ("ASoC: rt5640: Fix Jack work after system suspend")
added disable_irq() / enable_irq() calls on suspend/resume for machine
drivers which do not call snd_soc_component_set_jack(NULL) on suspend.
The new disable_irq() / enable_irq() are made conditional by
"if (rt5640->irq)" statements, but this is true for the machine drivers
which do call snd_soc_component_set_jack(NULL) on suspend too, causing
a disable_irq() call there on the already free-ed IRQ.
Change the "if (rt5640->irq)" condition to "if (rt5640->jack)" to fix this,
rt5640->jack is only set if the jack-detect IRQ handler is still active
when rt5640_suspend() runs.
And adjust rt5640_enable_hda_jack_detect()'s request_irq() error handling
to set rt5640->jack to NULL to match (note that the old setting of irq to
-ENOXIO still resulted in disable_irq(-ENOXIO) calls on suspend).
Fixes: 5fabcc90e7 ("ASoC: rt5640: Fix Jack work after system suspend")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following prints are observed while testing audio on Jetson AGX Orin which
has onboard RT5640 audio codec:
BUG: sleeping function called from invalid context at kernel/workqueue.c:3027
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
preempt_count: 10001, expected: 0
RCU nest depth: 0, expected: 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x1e0/0x270
---[ end trace ad1c64905aac14a6 ]-
The IRQ handler rt5640_irq() runs in interrupt context and can sleep
during cancel_delayed_work_sync().
The only thing which rt5640_irq() does is cancel + (re-)queue
the jack_work delayed_work. This can be done in a single non sleeping
call by replacing queue_delayed_work() with mod_delayed_work(),
avoiding the sleep in atomic context.
Fixes: 051dade346 ("ASoC: rt5640: Fix the wrong state of JD1 and JD2")
Reported-by: Sameer Pujar <spujar@nvidia.com>
Closes: https://lore.kernel.org/r/1688015537-31682-4-git-send-email-spujar@nvidia.com
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 70a6404ff6 ("ASoC: rt5640: Fix sleep in atomic context")
not only switched from request_irq() to request_threaded_irq(),
to fix the sleep in atomic context issue, but it also added
devm management of the IRQ by actually switching to
devm_request_threaded_irq() (without any explanation in the commit
message for this change).
This is wrong since the IRQ was already explicitly managed by
the driver. On unbind the ASoC core will call rt5640_set_jack(NULL)
which in turn will call rt5640_disable_jack_detect() which
frees the IRQ already. So now we have a double free.
Besides the unexplained switch to devm being wrong, the actual fix
for the sleep in atomic context issue also is not the best solution.
The only thing which rt5640_irq() does is cancel + (re-)queue
the jack_work delayed_work. This can be done in a single non sleeping
call by replacing queue_delayed_work() with mod_delayed_work(),
which does not sleep. Using mod_delayed_work() is a much better fix
then adding a thread which does nothing other then queuing a work-item.
This patch is a straight revert of the troublesome changes, the switch
to mod_delayed_work() is done in a separate follow-up patch.
Fixes: 70a6404ff6 ("ASoC: rt5640: Fix sleep in atomic context")
Cc: Sameer Pujar <spujar@nvidia.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add match data improvements for tlv320aic32x4
driver.
This patch series is only compile tested.
Merge series from Linus Walleij <linus.walleij@linaro.org>:
The Maxim devices are pretty straight-forward to convert
over to use GPIO descriptors, so let's do it.
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add match data improvements for ak4642 driver.
This patch series is only compile tested.
Merge series from Marian Postevca <posteuca@mutex.one>:
This series adds support for a line of HUAWEI laptops with
AMD CPUs that connect using the ACP3x module to a ES8336 CODEC.
The CODEC driver must be extended to support the S32 LE format
and the MCLK div by 2 option. MCLK div by 2 is needed for one specific
SKU, which uses a 48Mhz MCLK, which seems to be too high of a frequency
for the CODEC and must be divided by 2.
The acp legacy driver must also be extended by using callbacks so that
the more complicated handling of this specific CODEC can be moved
outside the more generic ACP code.
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series contains several fixes and improvements to drivers
based on the CS35l41 audio codec.
It has been verified on Valve's Steam Deck, except the HDA related patches.
Make use of the recently introduced EXPORT_GPL_DEV_PM_OPS() macro, to
conditionally export the runtime/system PM functions.
Replace the old SET_{RUNTIME,SYSTEM_SLEEP,NOIRQ_SYSTEM_SLEEP}_PM_OPS()
helpers with their modern alternatives and get rid of the now
unnecessary '__maybe_unused' annotations on all PM functions.
Additionally, use the pm_ptr() macro to fix the following errors when
building with CONFIG_PM disabled:
ERROR: modpost: "cs35l41_pm_ops" [sound/soc/codecs/snd-soc-cs35l41-spi.ko] undefined!
ERROR: modpost: "cs35l41_pm_ops" [sound/soc/codecs/snd-soc-cs35l41-i2c.ko] undefined!
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-9-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use dev_err_probe() helper where possible, to simplify error handling
during probe.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-8-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the documentation, drivers are responsible for undoing at
removal time all runtime PM changes done during probing.
Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which
are necessary for undoing pm_runtime_use_autosuspend().
Note this would have been handled implicitly by
devm_pm_runtime_enable(), but there is a need to continue using
pm_runtime_enable()/pm_runtime_disable() in order to ensure the runtime
PM is disabled as soon as the remove() callback is entered.
Fixes: f517ba4924 ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The interrupt handler invokes pm_runtime_get_sync() without checking the
returned error code.
Add a proper verification and switch to pm_runtime_resume_and_get(), to
avoid the need to call pm_runtime_put_noidle() for decrementing the PM
usage counter before returning from the error condition.
Fixes: f517ba4924 ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enabling the active/passive shared boosts requires setting SYNC_EN, but
*not* before receiving the PLL Lock signal.
Due to improper error handling, it was not obvious that waiting for the
completion operation times out and, consequently, the shared boost is
never activated.
Further investigations revealed the signal is triggered while
snd_pcm_start() is executed, right after receiving the
SNDRV_PCM_TRIGGER_START command, which happens long after the
SND_SOC_DAPM_PRE_PMU event handler is invoked as part of
snd_pcm_prepare(). That is where cs35l41_global_enable() is called
from.
Increasing the wait duration doesn't help, as it only causes an
unnecessary delay in the invocation of snd_pcm_start(). Moving the wait
and the subsequent regmap operations to the SNDRV_PCM_TRIGGER_START
callback is not a solution either, since they would be executed in an
IRQ-off atomic context.
Solve the issue by setting the SYNC_EN bit in PWR_CTRL3 register right
after receiving the PLL Lock interrupt.
Additionally, drop the unnecessary writes to PWR_CTRL1 register, part of
the original mdsync_up_seq, which would have toggled GLOBAL_EN with
unwanted consequences on PLL locking behavior.
Fixes: f503056493 ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Technically, an interrupt handler can be called before probe() finishes
its execution, hence ensure the pll_lock completion object is always
initialized before being accessed in cs35l41_irq().
Fixes: f503056493 ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return code of regmap_multi_reg_write() call related to "MDSYNC up"
sequence is shadowed by the subsequent regmap_read_poll_timeout()
invocation, which will hit a timeout in case the write operation above
fails.
Make sure cs35l41_global_enable() returns the correct error code instead
of -ETIMEDOUT.
Additionally, to be able to distinguish between the timeouts of
wait_for_completion_timeout() and regmap_read_poll_timeout(), print an
error message for the former and return immediately. This also avoids
having to wait unnecessarily for the second time.
Fixes: f8264c7592 ("ALSA: cs35l41: Poll for Power Up/Down rather than waiting a fixed delay")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return code of regmap_multi_reg_write() call related to "MDSYNC
down" sequence is shadowed by the subsequent
wait_for_completion_timeout() invocation, which is expected to time
timeout in case the write operation failed.
Let cs35l41_global_enable() return the correct error code instead of
-ETIMEDOUT.
Fixes: f503056493 ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is already using solely GPIO descriptors and
do not need to include the legacy headers <linux/gpio.h>
or <linux/of_gpio.h>. Drop them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-7-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is already using solely GPIO descriptors and
do not need to include the legacy headers <linux/gpio.h>
or <linux/of_gpio.h>. Drop them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-6-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of relying on legacy interfaces, convert the driver to
use GPIO descriptors. This is a straight-forward conversion,
we support also sdw devices providing GPIO descriptor tables
if they so desire.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-3-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MAX9768 is pretty straight forward to convert to GPIO
descriptors.
To name the GPIO properties, I looke at the bindings in
maxim,max9759.yaml which names these GPIO "mute" and
"shutdown" respectively.
No board files using platform data exist in the kernel, new
users can use GPIO descriptor tables if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230911-descriptors-asoc-max-v2-1-b9d793fb768e@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The "AMP Enable Switch" is useful in systems with multiple
amplifiers connected to the same audio bus
but not all of them are needed for all use cases.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-4-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link VMON, IMON, TEMPMON, VDD_BSTMON and VDD_BATTMON
to DSP1. The CSPL firmware uses them for the speaker calibration
and monitoring.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-3-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds "Analog PCM Volume" control with supported values
0 = 10dB,1 = 13dB,2 = 16dB and 3 = 19dB.
The amplifier can operate either in Speaker Mode or Receiver Mode
as configured by the user. Speaker Mode has four gain options
to support maximum amplifier output amplitude for loud
speaker application. Receiver Mode has further optimized
noise performance while maintaining sufficient output to support
phone receiver application. While configured in Receiver Mode,
the analog PCM Volume control is disabled and
the analog gain is fixed to 1dB.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-2-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Checks the index computed by the virq offset before printing the
error condition in cs35l45_spk_safe_err() handler.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-1-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify probe() by replacing of_match_device->i2c_get_match_data() and
extend matching support for ID table. Also replace
dev_err()->dev_err_probe() to simplify the code.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230828174856.122559-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify probe() by replacing of_match_device->i2c_get_match_data() and
extend matching support for ID table.
While at it, remove comma in the terminator entry and simplify probe()
by replacing dev_err->dev_err_probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230828174019.119250-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To properly support a line of Huawei laptops with an AMD CPU
and an ES8336 codec connected to the ACP3X module, we need
to enable the codec option to divide the MCLK by 2.
This is needed because for at least one SKU that has a 48Mhz
MCLK the sound is distorted unless the MCLK div by 2 option
is enabled.
The option to divide the MCLK will first be tried. If no suitable
clocking can be generated from this frequency, then the normal
non-halved MCLK frequency will be tried.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-4-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
No need for a special define since we can use ARRAY_SIZE() directly,
and won't need to worry to keep it in sync.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-3-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
This CODEC does support the S32 LE format in es8316_pcm_hw_params(),
but doesn't have it enabled in ES8316_FORMATS. Enable it so that we
have more options to match with components.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20230829220116.1159-2-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
SM6115 has a TX macro, which surprisingly doesn't host a SWR master.
Conditionally skip the SWR reset sequence on this platform.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230825-topic-6115tx-v1-2-ebed201ad54b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Simpilfy probe() by replacing of_device_get_match_data() and id lookup for
retrieving match data by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230831204734.104954-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some minor cleanups:
Replace local variable np with dev_fwnode()
Replace dev_err()->dev_err_probe().
Remove comma in the terminator entry for OF table.
Drop a space in the terminator entry for ID table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230831204734.104954-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 422f10adc3 ("ASoC: wm8960: Add support for the power supplies")
added regulator support to the wm8960 driver, but neglected to update
error handling in the probe function. This results in warning backtraces
if the probe function fails.
Fixes: 422f10adc3 ("ASoC: wm8960: Add support for the power supplies")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230909120237.2646275-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver remove() must call pm_runtime_dont_use_autosuspend().
Drivers that call pm_runtime_use_autosuspend() must disable
it in driver remove(). Unfortunately until recently this was
only mentioned in 1 line in a 900+ line document so most
people hadn't noticed this. It has only recently been added
to the kerneldoc of pm_runtime_use_autosuspend().
THIS WON'T APPLY CLEANLY TO V6.5 AND EARLIER:
We will send a separate backported patch to stable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230908101716.2658582-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify probe() by replacing of_match_node() and i2c_match_id() with
i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831194622.87653-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add enum aic32x4_type to aic32x4_probe() and drop using dev_set_drvdata()
from tlv320aic32x4_{i2c,spi} drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831194622.87653-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround
-----BEGIN PGP SIGNATURE-----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=txoJ
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround"
* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek - ALC287 I2S speaker platform support
ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
ASoC: Intel: avs: Provide support for fallback topology
ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
ASoC: rt5645: NULL pointer access when removing jack
ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E)
MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS
ALSA: sb: Fix wrong argument in commented code
ALSA: pcm: Fix error checks of default read/write copy ops
ASoC: Name iov_iter argument as iterator instead of buffer
ASoC: dmaengine: Drop unused iov_iter for process callback
ALSA: hda/tas2781: Use standard clamp() macro
ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors
ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc
ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe()
ASoC: cs35l45: Rename DACPCM1 Source control
ASoC: cs35l45: Fix "Dead assigment" warning
ASoC: cs35l45: Add support for Chip ID 0x35A460
...
A bunch of fixes and new IDs that came in since the initial pull request
- all driver specific and nothing too exciting.
There's a trivial conflict in the AMD driver ID table due to the last
v6.5 fixes not having been merged up.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmT5uzEACgkQJNaLcl1U
h9D1RAf/SrPNpWDm5nX0suSQiNqxyzeT+deZtYtKGaF0/rMdOLsnqQyPKV25s9xS
bqdI03oFMPfXOqfPW9F+4bmFBuWlL2kl1n1HZIx/bm8/lDCEBQVOXpOl56lHJpPv
I91dh/1eVUp20FtPwaLwMgPpVb/iJvVSol/IuSvjXICggDY2091F05nBWef2z93S
3tRVkDX4p+Ywra9lFexV0goRL/bCfdMSG8GHHurdVWB4y6fI1LC6eoPEYsLujzvx
92//HR7mx11uo9Kf+SiHBJVgZAzW9pJXpnjgTx3X/Isrfxv8h/MnSR3btUKDp3Ti
okxLvCujDZVhbVP6DiJEuCmXr0OXdQ==
=abtH
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.6-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.6
A bunch of fixes and new IDs that came in since the initial pull request
- all driver specific and nothing too exciting.
There's a trivial conflict in the AMD driver ID table due to the last
v6.5 fixes not having been merged up.
Machine driver calls snd_soc_component_set_jack() function with NULL
jack and data parameters when removing jack in codec exit function.
Do not access data when jack is NULL.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230904104046.4150208-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported issues.
The last bit of cleanups from Jiri and the tty structure size reduction
came in last week, a bit late but as they were just style changes and
size reductions, I figured they should get into this merge cycle so that
others can work on top of them with no merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH+jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKyACgldt6QeenTN+6dXIHS/eQHtTKZwMAn3arSeXI
QrUUnLFjOWyoX87tbMBQ
=LVw0
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported
issues. The last bit of cleanups from Jiri and the tty structure size
reduction came in last week, a bit late but as they were just style
changes and size reductions, I figured they should get into this merge
cycle so that others can work on top of them with no merge conflicts"
* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
tty: shrink the size of struct tty_struct by 40 bytes
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: unify counts to size_t
tty: n_tty: use u8 for chars and flags
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: move newline handling to a separate function
tty: n_tty: move canon handling to a separate function
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use output character directly
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
Documentation: devices.txt: Fix minors for ttyCPM*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Remove ttyIOC*
serial: 8250_bcm7271: improve bcm7271 8250 port
...
Ignore failure to read from the cs35l56 when polling as the device will
NAK i2c accesses until it has booted and this would terminate the poll
of regmap_read_poll_timeout().
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230829160433.2647889-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org
When clk_get_optional() fails, the error handling code does a 'goto
err_pm' with ret = 0, which is resturning success on a failure path.
Fix this by assigning the PTR_ERR(priv-mclk) to ret variable.
Fixes: fc918cbe87 ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230829073635.1877367-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org
Rename control to "DACPCM Source" for backward compatibility
with previous implementation.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230828170525.335671-5-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org
These were some changes in my v6.4 branch that never got sent as fixes,
none of them super urgent thankfully.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTstNgACgkQJNaLcl1U
h9Cdpgf/QobBZAA/QCr1o9+ghrqdGwkgYtwJixJPDvb8rv4eaU892CHtyIBLd0Li
bfhxDKyDIKkqomy/8ssjU2lg08aqX+2wgJxdsL/ni5lDJEa4YHSjTO1OwBL68w9F
5KL83dgdlzr91tHhwwJQ3DSBJolh37shAe+KiYicVHDEP+AP+3q559lBiT9hs+hB
eVe4IQ4mnJbHNRX+xmx/arrLZru+nPBKTJulkGtOnmqO0ZscwMAIqEiAor7yY9bG
lJjyt7N7oglRRngX/PVcHq+VpTPwPGWJ7K2qnrTJtnpVt+vD+4qpZSMbIwBAoApY
l8zWTjlrfFhMBiZOpyz62XrgQ8/Mhw==
=WIkh
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.5-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes that got left after v6.4
These were some changes in my v6.4 branch that never got sent as fixes,
none of them super urgent thankfully.
Three Qualcomm audio codecs (WCD9355, WCD934x and WCD938x) use the same
object file wcd-clsh-v2.o leading to warnings:
Makefile: wcd-clsh-v2.o is added to multiple modules: snd-soc-wcd9335 snd-soc-wcd934x snd-soc-wcd938x
Convert the wcd-clsh-v2.o to a module to solve it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230828132316.190386-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
The rest of the updates for v6.6, some of the highlights include:
- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTo6Y0ACgkQJNaLcl1U
h9AnaAf/XiBSnZl2i9wFckPy7bLcR74YrP1sFet5ZAqtpIt+/DvzQlgFAraHJ4tR
ScM2ZyyMwREaFhrHIXKLm8kbaOKeIjIMSxiHREVG9Wibq8d1TwaOHWAcXc9jMsQb
3G23Aizy2h5yD+/VTh8q6aV+fmYZJDfr1tIu8zWva90HcL2fMGvLjVdt24RNejTL
bgCC2GaaGP4pnC3xoBo1hGayvp0PES1BHVeyAXqMVscH+GCplPNJEdSHvU14OBck
1Nfjf5NVkh5G0pvrbG/yblsn1Zm5HRAzCE7gF1OHLFH27ygvp7fGk6TIXXpvw23c
OSvveYee2YLrf4kyndmv88Aq8JVTeA==
=9F/T
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.6
The rest of the updates for v6.6, some of the highlights include:
- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.
clang warns (or errors with CONFIG_WERROR=y):
sound/soc/codecs/cs42l43.c:1371:2: error: variable 'ret' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
1371 | default:
| ^~~~~~~
sound/soc/codecs/cs42l43.c:1377:9: note: uninitialized use occurs here
1377 | return ret;
| ^~~
sound/soc/codecs/cs42l43.c:1349:9: note: initialize the variable 'ret' to silence this warning
1349 | int ret;
| ^
| = 0
1 error generated.
Initialize ret to 0 in the default case, as there was nothing to do for
other event types.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1922
Fixes: fc918cbe87 ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230823-cs42l43_pll_ev-init-ret-v1-1-5836f1ad5dad@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the hardware may be designed as a single-ended input, the headset mic
record only supports single-ended input on the left side. This patch
will enhance microphone recording performance for single-end.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20230823071244.1861487-2-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current analog gain TLV seems to have completely incorrect values in
it. The gain starts at 0.5dB, proceeds in 1dB steps, and has no mute
value, correct the control to match.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230823085308.753572-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The ASoC component provides the majority of the functionality of the
device, all the audio functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch will improve the depop function of CBJ detection before the headphone playback
when the system resumes.
We also want to complete the CBJ detection in the system-level resume function.
It could avoid triggering the detection at the playing state of headphones.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two patches add an ACPI HID and update the way the platform-
specific firmware identifier is extracted from the ACPI.
Convert the RT5682S to use GPIO descriptors and drop the
legacy GPIO headers.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-5-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the RT5682 to use GPIO descriptors and drop the
legacy GPIO headers.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Make sure to make sure SDW devices can associate with
an LDO1 EN descriptor too, if they so desire by putting
the lookup into the common code.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-4-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the RT5668 to use GPIO descriptors and drop the
legacy GPIO headers.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-3-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5665 driver has some stub support for GPIO descriptors
going back to the initial driver commit, where there are
two GPIO descriptors for the LDO and headphone detection
defined in the device state. Well, let's make use of the
descriptor properly.
We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-2-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5640 driver is already using GPIO descriptors for some
stuff, all that is needed is to convert the remaining LDO1
control line to also use descriptors.
Simplify the code using gpiod_get_optional() and drop the
special "of" parsing function: these descriptors need not
come from device tree and it's optional so hey.
Keep some NULL checks around the GPIO operations even though
gpiolib is essentially NULL-tolerant, because by checking
for whether we have a valid GPIO descriptor or not we can
avoid a 400 ms delay which is great.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-1-02fa2ca3e5b0@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
fixed register access error when switching to other tas2781 -- refresh the page
inside regmap on the switched tas2781
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230817093257.951-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An ACPI ID has been allocated for CS35L56 ASoC devices so that they can
be instantiated from ACPI Device entries.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a device property "cirrus,firmware-uid" to get the unique firmware
identifier instead of using ACPI _SUB. There aren't any products that use
_SUB.
There will not usually be a _SUB in Soundwire nodes. The ACPI can use a
_DSD section for custom properties.
There is also a need to support instantiating this driver using software
nodes. This is for systems where the CS35L56 is a back-end device and the
ACPI refers only to the front-end audio device - there will not be any ACPI
references to CS35L56.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'devtype' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:
wm8904.c:2205:21: error: cast to smaller integer type 'enum wm8904_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230815143204.379708-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
tlv320aic32x4.c:1352:18: error: cast to smaller integer type 'enum aic32x4_type' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230815143204.379708-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Use the FIRMWARE_MISSING flag in the CS35L56 to determine whether it is
safe to download a firmware patch.
Merge series from Li Zetao <lizetao1@huawei.com>:
This patch set use the helper function devm_kmemdup() to replace
devm_kmalloc + memcpy, which is the same as implementing the function
separately.
Only attempt to download wmfw/bin files to a non-secured part if
it reports FIRMWARE_MISSING. If FIRMWARE_MISSING is false the
firmware has already been patched and overwriting the patch could
corrupt the running firmware.
For a secured part the wmfw/bin can be downloaded even if
FIRMWARE_MISSING is false, because they will only patch tunings.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815124826.5447-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a flag to wm_adsp_power_up() that indicates whether it should attempt
to find and load firmware files.
This is to support DSPs that have built-in firmware that may already have
been patched (for example, by the BIOS). In that case the patch must not
be overwritten because that could corrupt the running firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815124826.5447-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230810114738.2103792-2-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The value of register(NDAC,MDAC,NADC,MADC,BCLKN) maybe zero lead to
divide by zero in clk_aic32x4_div_recalc_rate().And the rate should be
divide by 128 if the value was zero in this function according to the
datasheet.
Add the macro AIC32X4_DIV_MAX to present the 128 and return 0 if failing
to read the value of register.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Link: https://lore.kernel.org/r/20230813125520.11067-1-aarongt.shen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simpilfy probe() by replacing of_device_get_match_data() and id lookup for
retrieving match data by i2c_get_match_data().
While at it, drop unused local variable np from probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230813073458.59606-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87h6p99m55.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Linus Walleij <linus.walleij@linaro.org>:
These drivers include legacy GPIO headers for no reason
at all, so get rid of the includes.
This driver include the GPIO legacy header <linux/gpio.h yet
doesn't use symbols from it. It is using the new consumer
include <linux/gpio/consumer.h already. Drop the surplus
include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org
Link: https://lore.kernel.org/r/20230812-descriptors-asoc-v1-11-eb4dca1f68af@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
This driver include the GPIO legacy header <linux/gpio.h yet
doesn't use symbols from it. It is using the new consumer
include <linux/gpio/consumer.h already. Drop the surplus
include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org
Link: https://lore.kernel.org/r/20230812-descriptors-asoc-v1-10-eb4dca1f68af@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
This driver include the GPIO legacy header <linux/gpio.h yet
doesn't use symbols from it. It is using the new consumer
include <linux/gpio/consumer.h already. Drop the surplus
include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org
Link: https://lore.kernel.org/r/20230812-descriptors-asoc-v1-3-eb4dca1f68af@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
This patch uses a vendor register to check whether the system hibernated ever.
The driver will only set the preset when the driver brings up or the system hibernated.
It will avoid the unknown issue that makes the speaker output louder and can't control the volume.
Signed-off-by: Shuming Fan <shumingf@realtek.com
Link: https://lore.kernel.org/r/20230811093822.37573-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org
This makes all those 'char's an explicit 'u8'. This is part of the
continuing unification of chars and flags to be consistent u8.
This approaches tty_port_default_receive_buf().
Note that we do not change signedness as we compile with
-funsigned-char.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-18-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes all those 'unsigned char's an explicit 'u8'. This is part of
the continuing unification of chars and flags to be consistent u8.
This approaches tty_port_default_receive_buf(). Flags to be next.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Count passed to tty_ldisc_ops::receive_buf*(), ::lookahead_buf(), and
returned from ::receive_buf2() is expected to be size_t. So set it to
size_t to unify with the rest of the code.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add software reset before setting preset registers to make sure
all the registers are the default value before preset.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/4f405c7deb9642e1a8599c5f103b5759@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When cs35l56_system_resume() needs to reload firmware it should call
wm_adsp_power_down() to put cs_dsp into a powered-down state before
cs35l56_secure_patch() or cs35l56_patch() calls wm_adsp_power_up().
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support self-booting DSPs that operate outside of a conventional DAPM
event life cycle expose a companion function to wm_adsp_power_up() so
that the correct state of the DSP firmware and controls can be recorded.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L56 could be hard-reset during a system suspend-resume cycle,
either by the codec driver, in cs35l56_system_resume_early(), or by ACPI.
After a hard reset the driver must wait for the control port to be ready
(datasheet tIRS time) before attempting to access the CS35L56.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI setting for a GPIO default state has higher priority than the
flag passed to devm_gpiod_get_optional() so ACPI can override the
GPIOD_OUT_LOW. Explicitly set the GPIO low when hard resetting.
Although GPIOD_OUT_LOW can't be relied on this doesn't seem like a
reason to stop passing it to devm_gpiod_get_optional(). So we still pass
it to state our intent, but can deal with it having no effect.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Re-implement setting of ASP TDM slots so that only the common loop to
build the register word is factored out.
The original cs35l56_set_asp_slot_positions() had an apparent
uninitialized variable if the passed register address was neither of the
ASP slot registers. In fact this would never happen because the calling
code passed valid registers.
While it's trivial to initialize the variable or add a default case,
actually the only common code was the loop at the end of the function,
which simply manipulates some mask values and is identical for either
register. Factoring out the regmap_write() didn't really gain anything.
So instead re-implement the code to replace the original function with
cs35l56_make_tdm_config_word() that only does the loop, and change the
calling code to call regmap_write() directly.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
aw88261_reg_update() returns an unintialized error code in the
success path:
sound/soc/codecs/aw88261.c:651:7: error: variable 'ret' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (aw_dev->prof_cur != aw_dev->prof_index) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/aw88261.c:660:9: note: uninitialized use occurs here
return ret;
^~~
sound/soc/codecs/aw88261.c:651:3: note: remove the 'if' if its condition is always true
if (aw_dev->prof_cur != aw_dev->prof_index) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Return zero instead here.
Fixes: 028a2ae256 ("ASoC: codecs: Add aw88261 amplifier driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230808125703.1611325-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset improves the pm_runtime behavior in rare corner cases
identified by the Intel CI in the last 6 months.
a) in stress-tests, it's not uncommon to see the following type of
warnings when the codec reports as ATTACHED
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This warning was not correlated with any functional issue, but it
exposed a design issue on when to enable pm_runtime. The recommended
practice in the pm_runtime documentation is to keep the devices in
'suspended' mode and mark them as 'active' when they are really
functional.
b) enabling pm_runtime when the codec reports as ATTACHED also creates
a problematic case when the ASoC pm_runtime_get_sync() will silently
fail due to the -EACCESS error handling. This can happen when playback
starts before the codec is enumerated.
This patchset modifies the initial stages so that codecs are
pm_runtime enabled in the .probe() callback, but become pm_runtime
'active' only when they report present. This is better aligned with
the design of the pm_runtime helpers and improved CI results
significantly.
This patchset modifies all existing SoundWire codecs (except Qualcomm
ones), but the pattern of changes is exactly the same in all patches.
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the jz4740 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-jz-maple-v1-1-3f745adf96e5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reformat the code to match Linuxn coding style: re-indent continued
lines and stop too-early line wrapping, drop unneeded {} brackets. No
functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX98926 and MAX98927 are quite similar and use the same bindings,
although drivers were not implementing them in the same way:
MAX98926 has boolean "interleave-mode" but MAX98927 has uint32
"interleave_mode". Unify them under maxim,interleave-mode, already used
in other Maxim device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.
The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.
In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.
The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.
In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5682 needs specific attention: there are two regmap in
rt5682_priv struct, one is sdw_regmap which is for IO transfer, and
the other is used for registers control.
We need to set both regmaps when we set cache only. Because if we set
rt5682->sdw_regmap only, rt5682->regmap won't set/get the right value
when it call regmap_write/read(rt5682->sdw_regmap, ...). If we set
rt5682->regmap only, regmap_write(rt5682->sdw_regmap, ...) is used
in rt5682_clock_config which will be called by the ..bus_config ops.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire bus may start after the probe where the SoundWire ASoC
components are registered. This creates a time window where the card
can be created and the registers be accessed.
As discussed on the mailing list, we can't really control when codecs
are enumerated and initialized, but we can make sure the access to the
codecs is cached until the hardware is accessible.
This patch configures regcache_cache_only() with a 'true' parameter in
the probe function, and a 'false' parameter in the io_init routine.
The rt5682 is handled through a different patch due to its specific
cache handling.
Link: https://lore.kernel.org/alsa-devel/20230503144102.242240-1-krzysztof.kozlowski@linaro.org/
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason the first batch of SoundWire codec drivers squelch
errors in the SoundWire probe callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD1
Add support for them.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803215506.142922-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm8960 driver supports an automatic clocking mode which will use the
MCLK directly where possible and fall back to the PLL if there is no
suitable configuration directly using the MCLK. Clock 0 will be used by
the generic cards when configuring things, currently this is a MCLK only
mode but using AUTO mode would be more functional. Since the driver
still prefers to use MCLK directly where possible there should be no
negative impact on systems which are able to use MCLK directly.
As far as I can see nothing is using the system clock as part of the
ABI, the only reference I can see to a mode in a machine driver is the
Freescale i.MX card which uses the automatic mode with an explicit in
kernel call using the constant so will be unaffected.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230731-asoc-wm8960-clk-v1-2-69f9ffa2b10a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When we have a MCLK provided by the clock API read the rate at startup
and store it so that there's something set before the machine driver has
done clocking configuration (eg, if it only configures clocking based on
sample rate).
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230731-asoc-wm8960-clk-v1-1-69f9ffa2b10a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ always the case for `strncpy`!
In this case, though, there was care taken to ensure that the
destination buffer would be NUL-terminated. The destination buffer is
zero-initialized and each `pm860x->name[i]` has a size of
`MAX_NAME_LENGTH + 1`. This means that there is unlikely to be a bug
here.
However, in an attempt to eliminate the usage of the `strncpy` API as
well as disambiguate implementations, replacements such as: `strscpy`,
`strscpy_pad`, `strtomem` and `strtomem_pad` should be preferred.
We are able to eliminate the need for `len + 1` since `strscpy`
guarantees NUL-termination for its destination buffer as per its
implementation [3]:
| /* Hit buffer length without finding a NUL; force NUL-termination. */
| if (res)
| dest[res-1] = '\0';
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
[3]: https://elixir.bootlin.com/linux/v6.3/source/lib/string.c#L183
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230727-sound-soc-codecs-v1-1-562fa2836bf4@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The maple tree register cache has now got to the point where is is
roughly feature compatible with the rbtree cache, let's convert the ST
drivers to use the more modern data structure.
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the sti-sas driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-st-maple-v1-5-46eab2c0ce23@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the stac9766 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-st-maple-v1-4-46eab2c0ce23@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the sta529 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-st-maple-v1-3-46eab2c0ce23@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the sta350 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-st-maple-v1-2-46eab2c0ce23@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the sta32x driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-st-maple-v1-1-46eab2c0ce23@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a control that there are three options to control the digital volume output.
The user could select "immediately" to make volume updates immediately
and avoid key tone missing issues.
In default, the driver selects that the volume update when a zero-crossing with a soft ramp.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230726091051.658754-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs42l51_of_match is only used in cs42l51-i2c.c now,
change it to static.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230725120917.513064-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here's an initial batch of updates for ASoC for this release cycle.
We've got a bunch of new drivers in here, a bit of core work from
Morimoto-san and quite a lot of janitorial work. There's several
updates that pull in changes from other subsystems in order to build
on them:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes.
- Create a library function for intlog10() and use it in the NAU8825
driver.
- Include the ASoC tests, including the topology tests, in the default
KUnit full test coverage. This also involves enabling UML builds of
ALSA since that's the default KUnit test environment which pulls in
the addition of some stubs to the driver.
- More factoring out from Morimoto-san.
- Convert a lot of drivers to use the more modern maple tree register
cache.
- Support for AMD machines with MAX98388 and NAU8821, Cirrus Logic
CS35L36, Intel AVS machines with ES8336 and RT5663 and NXP i.MX93.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS/t9MACgkQJNaLcl1U
h9Dg4wf+Njvy5zphgUJlSJ7vNj7GtzgldnWwfQrb+19BOtv5HHIYg4e/Yr4eWdgc
rg5DGIGvr8sxYQ44TCA59sXdTuakkNF/ejDoj8AwNsr/J3sD6S+FTkV8qLFcgQ3r
+0ElZ26I2kd6gfvDlwHfa5rJVPCa7vrg3o6EHccqRX9CSyPJRlwRqRRj+w8ftZtV
rZ7Gapz3E4A3mBo7VIO/kEgI1uSmaShM8d4HoVmxJEKJ6lbyX8SIXMBzZVq5z/iX
DcnRaMPAMhgzytmdDJ7SjJuxL0EOd6p8Lnk0jILvO6U30Z7aTunzMuK/o0GHqFkm
eHveoHIU4gbt3YqDFgPosPlxi4OCgw==
=KJZq
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.6-early' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.6
Here's an initial batch of updates for ASoC for this release cycle.
We've got a bunch of new drivers in here, a bit of core work from
Morimoto-san and quite a lot of janitorial work. There's several
updates that pull in changes from other subsystems in order to build
on them:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes.
- Create a library function for intlog10() and use it in the NAU8825
driver.
- Include the ASoC tests, including the topology tests, in the default
KUnit full test coverage. This also involves enabling UML builds of
ALSA since that's the default KUnit test environment which pulls in
the addition of some stubs to the driver.
- More factoring out from Morimoto-san.
- Convert a lot of drivers to use the more modern maple tree register
cache.
- Support for AMD machines with MAX98388 and NAU8821, Cirrus Logic
CS35L36, Intel AVS machines with ES8336 and RT5663 and NXP i.MX93.
The old jack detection function only supports fixed OMTP/CTIA
hardware connection. The new one supports auto OMTP/CTIA
headset detection
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-5-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Old power-up sequence causes large pop noise during start-up.
Using a new sequence instead.
Also, the registers are now reset to default value in suspend
function.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-3-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new calibration and headphone detection function
require reading new volatile registers. Add them in
the volatile register function.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-2-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old register naming method is confusing. The reg 0x57 decides
the default headset hardware connection type, and the reg 0xfb is
the headset detection status register, which changes during headset
insertion. Change the name to ES8326_HPDET_TYPE and ES8326_HPDET_STA.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-1-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090711.128247-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090654.128230-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090732.128282-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090721.128264-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090643.128213-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WM8904_ADC_TEST_0 register is modified as part of updating the OSR
controls but does not have a cache default, leading to errors when we try
to modify these controls in cache only mode with no prior read:
wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16
Add a read of the register to probe() to fill the cache and avoid both the
error messages and the misconfiguration of the chip which will result.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Dmytro Maluka <dmy@semihalf.com>:
This series includes 2 patches related to (but not fixing) the following
I2C failure which occurs sometimes during system suspend or resume and
indicates a problem with a spurious DA7219 interrupt:
[ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended
[ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440
...
[ 355.876462] Call Trace:
[ 355.876468] <TASK>
[ 355.876475] ? update_load_avg+0x1b3/0x615
[ 355.876484] __i2c_transfer+0x101/0x1d8
[ 355.876494] i2c_transfer+0x74/0x10d
[ 355.876504] regmap_i2c_read+0x6a/0x9c
[ 355.876513] _regmap_raw_read+0x179/0x223
[ 355.876521] regmap_raw_read+0x1e1/0x28e
[ 355.876527] regmap_bulk_read+0x17d/0x1ba
[ 355.876532] ? __wake_up+0xed/0x1bb
[ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184]
[ 355.876556] irq_thread+0x13c/0x231
[ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f
[ 355.876570] ? irq_thread_fn+0x4d/0x4d
[ 355.876576] kthread+0x13a/0x152
[ 355.876581] ? synchronize_irq+0xc3/0xc3
[ 355.876587] ? kthread_blkcg+0x31/0x31
[ 355.876592] ret_from_fork+0x1f/0x30
[ 355.876601] </TASK>
This log shows that DA7219 AAD interrupt handler da7219_aad_irq_thread()
is unexpectedly running when DA7219 is suspended and should not generate
interrupts. As a result, the IRQ handler is trying to read AAD IRQ event
status over I2C and is hitting the I2C driver "Transfer while suspended"
failure.
Patch #1 adds synchronize_irq() when suspending DA7219, to prevent the
IRQ handler from running after suspending if there is a pending IRQ
generated before suspending. With this patch the above failure is still
reproducible, so this patch does not fix any real observed issue so far,
but at least is useful for confirming that the above issue is not caused
by a pending IRQ but rather looks like a DA7219 hardware issue with an
unexpectedly generated IRQ.
Patch #2 does not fix the above issue either, but it prevents its
potentially harmful side effects. With the existing code, if the issue
occurs and the IRQ handler fails to read the AAD IRQ events status over
I2C, it does not check that and tries to use the garbage uninitialized
value of the events status, potentially reporting bogus events. This
patch fixes that by adding missing error checking.
In fact I'm sending these patches not only to submit them for review but
also to ask Renesas folks for any hints on a possible cause of the
described DA7219 issue (AAD interrupts spuriously firing after jack
detection is already disabled) or how to debug it further.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches adds support for using the CS35L56 boosted smart
amplifier on HDA systems. In these systems the CS35L56 audio is
routed through a HDA-to-I2S bridge codec.
This doesn't include the changes to the Realtek driver to actually hook
up the CS35L56 driver, because we don't yet have the QUIRK IDs to
associate it with. But we want to publish the driver now so that it is
available for bringing up hardware with the CS35L56.
The first 9 patches are moving code out of the ASoC driver and into the
shared library so that it can be shared with the HDA driver.
Patch #10 fixes missing #includes in the HDA headers so that the CS35L56
driver doesn't have to #include headers that it doesn't use.
To ensure the chip has correctly powered up or down before continuing,
the driver will now poll a register, rather than wait a fixed delay.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To enable the speaker output in external boost mode, 2 registers must
be set, one after another. The longer the time between the writes of
the two registers, the more likely, and more loudly a pop may occur.
To minimize this, an mbox command can be used to allow the firmware
to perform this action, minimizing any delay between write, thus
minimizing any pop or click as a result. The old method will remain
when running without firmware.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The LPASS macro drivers all acquire a number of clocks, but give no
indication when clk_get() fails, making it hard to identify and debug
system configuration issues. Make these drivers provide useful debug
information when this happens.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230721165027.2155528-1-quic_bjorande@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move issuing of a CS35L56_MBOX_CMD_SHUTDOWN command and then waiting for
the DSP to reach CS35L56_HALO_STATE_SHUTDOWN in the register appropriate
for the hardware revision into a common function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the waits for CS35L56_CONTROL_PORT_READY_US into a common
function, and also allow a wider range of allowed wait times.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Part of the initialization code in cs35l56_init() can be re-used
by the HDA driver so move it into a new function in the shared
library.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the code that initialized the struct cs_dsp members
into the shared library so that the HDA driver can use it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The majority of runtime_suspend and runtime_resume handling
doesn't have anything specific to the ASoC driver, so can be
shared by the HDA driver. Move this code into the shared
library.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the cs35l56 utility functions into the shared file so they are
available for use in HDA.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new cs35l56_base struct for utility functions.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function can be more easily reused in HDA if the tracking of whether
a soft reset is being performed and whether the device is connected to a
SoundWire bus is moved out of the function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC and HDA drivers have structures that contain some of the same
information - instead of maintaining two locations for this data the
drivers should share a common data structure as this will enable common
utility functions to be created.
The first step is to move the location of these members in the ASoC
driver.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.
And add an entry for the Positivo CW14Q01P-V2 to the DMI table, so that
jack-detection will work properly on this laptop.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230719200241.4865-1-edson.drosdeck@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When handling an AAD interrupt, if IRQ events read failed (for example,
due to i2c "Transfer while suspended" failure, i.e. when attempting to
read it while DA7219 is suspended, which may happen due to a spurious
AAD interrupt), the events array contains garbage uninitialized values.
So instead of trying to interprete those values and doing any actions
based on them (potentially resulting in misbehavior, e.g. reporting
bogus events), refuse to handle the interrupt.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/r/20230717193737.161784-3-dmy@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
da7219_aad_suspend() disables jack detection, which should prevent
generating new interrupts by DA7219 while suspended. However, there is a
theoretical possibility that there is a pending interrupt generated just
before suspending DA7219 and not handled yet, so the IRQ handler may
still run after DA7219 is suspended. To prevent that, wait until the
pending IRQ handling is done.
This patch arose as an attempt to fix the following I2C failure
occurring sometimes during system suspend or resume:
[ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended
[ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440
...
[ 355.876462] Call Trace:
[ 355.876468] <TASK>
[ 355.876475] ? update_load_avg+0x1b3/0x615
[ 355.876484] __i2c_transfer+0x101/0x1d8
[ 355.876494] i2c_transfer+0x74/0x10d
[ 355.876504] regmap_i2c_read+0x6a/0x9c
[ 355.876513] _regmap_raw_read+0x179/0x223
[ 355.876521] regmap_raw_read+0x1e1/0x28e
[ 355.876527] regmap_bulk_read+0x17d/0x1ba
[ 355.876532] ? __wake_up+0xed/0x1bb
[ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184]
[ 355.876556] irq_thread+0x13c/0x231
[ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f
[ 355.876570] ? irq_thread_fn+0x4d/0x4d
[ 355.876576] kthread+0x13a/0x152
[ 355.876581] ? synchronize_irq+0xc3/0xc3
[ 355.876587] ? kthread_blkcg+0x31/0x31
[ 355.876592] ret_from_fork+0x1f/0x30
[ 355.876601] </TASK>
which indicates that the AAD IRQ handler is unexpectedly running when
DA7219 is suspended, and as a result, is trying to read data from DA7219
over I2C and is hitting the I2C driver "Transfer while suspended"
failure.
However, with this patch the above failure is still reproducible. So
this patch does not fix any real observed issue so far, but at least is
useful for confirming that the above issue is not caused by a pending
IRQ but rather looks like a DA7219 hardware issue with an IRQ
unexpectedly generated after jack detection is already disabled.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/r/20230717193737.161784-2-dmy@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support DAC filter characteristics selection: Normal mode
and Sloping stopband. Sloping stopband may have
better frequency response.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1689927842-21165-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe() function fails with an error for platform_get_irq_byname()
but only logs when devm_request_threaded_irq() fails. Make this
consistent and fail to probe in that case as well. In practice this
should never happen unless something is really wrong.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-5-4b4a58b4240a@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio codec typically used for the MSM8916 SoC is split into two
parts: the digital codec is part of the SoC, while the analog codec is
part of the PM8916 PMIC.
The analog codec in the PMIC has no direct connection to the mclk of
the SoC (GCC_CODEC_DIGCODEC_CLK). As the name of the clock suggests
this is supplied to the digital part of the codec. During playback it
will use this clock to transmit the audio data via the "CDC PDM" pins
to the PMIC. In this case the analog codec indirectly receives the
clock signal through the digital codec.
GCC_CODEC_DIGCODEC_CLK is already managed by the driver of the digital
part of the codec in the SoC. Having this clock on the analog PMIC part
additionally is redundant and incorrect because the analog codec cannot
receive the clock signal without going through the digital codec.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-4-4b4a58b4240a@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the standard snd_ctl_activate_id() helper instead of an open code
for code simplification.
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230718141304.1032-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Mark Brown <broonie@kernel.org>:
The maple tree register register cache is now able to generate multi
register writes which was the last big feature of the rbtree cache that
it didn't support so let's update drivers to use the cache with the more
modern data structure.
The soft (firmware) registers for volume/mute/posture are not reset by
a chip soft-reset, so use a regmap patch to set them to defaults.
cs35l56_reread_firmware_registers() has been removed. Its intent was to
use whatever the firmware set as a default. But the driver now patches the
defaults to the registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230718144625.39634-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm9713 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-48-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm9712 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-47-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm9705 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-46-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8988 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-45-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8985 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-44-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8983 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-43-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8978 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-42-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8971 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-41-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8955 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-40-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the w8940 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-39-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8996 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-38-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8995 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-37-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8993 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-36-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8991 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-35-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8962 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-34-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8961 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-33-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8960 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-32-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8904 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-31-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8903 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-30-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8900 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-29-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8804 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-28-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8776 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-27-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8770 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-26-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8753 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-25-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8750 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-24-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8741 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-23-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8737 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-22-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8731 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-21-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8728 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-20-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8711 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-19-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8580 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-18-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8523 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-17-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm8510 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-16-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm9090 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-15-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm9081 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-14-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm5100 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-13-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wm2200 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-12-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs4349 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-11-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs42xx8 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-10-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs42l56 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-9-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs42l52 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-8-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs4270 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-7-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs4265 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-6-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs42l51 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-5-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs35l56 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-4-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs35l45 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-3-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs35l41 driver to use the more modern data structure.
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-2-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs35l36 driver to use the more modern data structure.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-1-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm8960 codec is not readable, resulting in a NACK for address 0x3d (8-bit).
This can partially indicate it. For example: wm8962 codec use the same address
but is readable. This additional probe check will help prevent loading the wm8960
module incorrectly on wm8962 hardware.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230713222513.1636591-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wsa883x driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-qcom-maple-v1-4-15f8089664b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wsa881x driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-qcom-maple-v1-3-15f8089664b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wcd938x driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-qcom-maple-v1-2-15f8089664b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the wcd9335 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-qcom-maple-v1-1-15f8089664b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 2cb1e0259f ("ASoC: cs42l51: re-hook of_match_table
pointer"), 9 years ago, some random guy fixed the cs42l51 after it was
split into a core part and an I2C part to properly match based on a
Device Tree compatible string.
However, the fix in this commit is wrong: the MODULE_DEVICE_TABLE(of,
....) is in the core part of the driver, not the I2C part. Therefore,
automatic module loading based on module.alias, based on matching with
the DT compatible string, loads the core part of the driver, but not
the I2C part. And threfore, the i2c_driver is not registered, and the
codec is not known to the system, nor matched with a DT node with the
corresponding compatible string.
In order to fix that, we move the MODULE_DEVICE_TABLE(of, ...) into
the I2C part of the driver. The cs42l51_of_match[] array is also moved
as well, as it is not possible to have this definition in one file,
and the MODULE_DEVICE_TABLE(of, ...) invocation in another file, due
to how MODULE_DEVICE_TABLE works.
Thanks to this commit, the I2C part of the driver now properly
autoloads, and thanks to its dependency on the core part, the core
part gets autoloaded as well, resulting in a functional sound card
without having to manually load kernel modules.
Fixes: 2cb1e0259f ("ASoC: cs42l51: re-hook of_match_table pointer")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20230713112112.778576-1-thomas.petazzoni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmS0at0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG6m8H/RZCd2DWeM94CgK5
DIxNLxu90PrEcrOnqeHFJtQoSiUQTHeseh9E4BH0JdPDxtlU89VwYRAevseWiVkp
JyyJPB40UR4i2DO0P1+oWBBsGEG+bo8lZ1M+uxU5k6lgC0fAi96/O48mwwmI0Mtm
P6BkWd3IkSXc7l4AGIrKa5P+pYEnm0Z6YAZILfdMVBcLXZWv1OAwEEkZNdUuhE3d
5DxlQ8MLzlQIbe+LasiwdL9r606acFaJG9Hewl9x5DBlsObZ3d2rX4vEt1NEVh89
shV29xm2AjCpLh4kstJFdTDCkDw/4H7TcFB/NMxXyzEXp3Bx8YXq+mjVd2mpq1FI
hHtCsOA=
=KiaU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS0zgsACgkQJNaLcl1U
h9C8Zwf9HZwtLMlojz17PYAkErGIwAGzwH8jsBmWnOwMuifQi8ofpFLv0gFz17k0
P3bIyXBc4JV3I0+A+b5+sv+BOtaUk9pWSoLIn5SAEK0ydfqpWhkKou2eoMmGt/UW
Zv6WSCfgN7K2XiXIuvUBjyr4F57m+GMb5/UIPDv01TPrOb+Usz6kmZwgtRqpOTE4
ozDNUwNtx074h7ZHNx/taP7i2bt9pD+KnY6KgJ/6S9QtCE7+SCuDGIV35YFJx/8R
b+hrmm40ES7GP/qYXZ+OF+iBAm7svs6nSKbkSmKxZZDHc9i4GkOOt8yI3TvF2GPf
uTFjjLNuZEHat5ksZfFCbdEAlYR0sQ==
=x+J9
-----END PGP SIGNATURE-----
ASoC: Merge v6.5-rc2
Get a similar baseline to my other branches, and fixes for people using
the branch.
The internal analog power and hp Vref of es8326 should always be on to
reduce pop noise. The HP_VOL and HP_CAL are moved to es8326_mute function
so they are turned on at last and turned off at first.
Also, the calibration should be done manually once during start-up
to reduce DC offset on headphone.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230714032453.3334-1-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the class-D internal register setting during initialization
to be compatible with most speaker designs to avoid noise.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20230712062553.31066-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The maple tree register cache has now got to feature parity with the
rbtree cache, there are some different tradeoffs made and it should be a
better choice for most modern systems. Convert the Analog Devices
drivers to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
Mark Brown (10):
ASoC: ad1836: Update to use maple tree register cache
ASoC: ad1980: Update to use maple tree register cache
ASoC: adau1372: Update to use maple tree register cache
ASoC: adau1373: Update to use maple tree register cache
ASoC: adau1701: Update to use maple tree register cache
ASoC: adau1761: Update to use maple tree register cache
ASoC: adau1781: Update to use maple tree register cache
ASoC: adau1977: Update to use maple tree register cache
ASoC: adau7118: Update to use maple tree register cache
ASoC: adav80x: Update to use maple tree register cache
sound/soc/codecs/ad1836.c | 2 +-
sound/soc/codecs/ad1980.c | 2 +-
sound/soc/codecs/adau1372.c | 2 +-
sound/soc/codecs/adau1373.c | 2 +-
sound/soc/codecs/adau1701.c | 2 +-
sound/soc/codecs/adau1761.c | 2 +-
sound/soc/codecs/adau1781.c | 2 +-
sound/soc/codecs/adau1977.c | 2 +-
sound/soc/codecs/adau7118-i2c.c | 2 +-
sound/soc/codecs/adav80x.c | 2 +-
10 files changed, 10 insertions(+), 10 deletions(-)
---
base-commit: 06c2afb862
change-id: 20230701-asoc-ad-maple-170068cf0c39
Best regards,
--
Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adav80x driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-10-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau7118 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-9-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1977 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-8-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1781 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-7-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1761 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-6-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1701 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-5-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1373 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-4-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the adau1382 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-3-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the ad1980 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-2-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the ad1836 driver to use the more modern data structure.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-ad-maple-v1-1-7d2f35d42b5f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
The code can be simplified with refactored GPIO parts and with use of
device_get_match_data(). Besides that couple of additional changes,
one for maintenance and one for making IRQ domain agnostic (not being
pinned to OF).
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Series adds support for two boards: es8336 and rt5663. The former is
utilized by some KBL-based tablets whereas the latter unlocks
Chromebooks with rt5663 i2c codecs.
As existing implementation of es8336 (es8316.c) codec driver is not
prepared to cope with KBL-based platforms, couple of small,
clock-related changes precede anything avs-driver related.
The tail of patchset cleans up existing implementation of rt5682.
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
The first three patches moves intlog10() to be available in entire
kernel. The last one removes copy of it in one driver. Besides already
good Lines of Code (LoC) statistics the upcoming users, if any, can
utilize the exported functions.
The series can be routed via ASoC tree (as Mauro suggested).
Note, int_log.h is separated from math.h due to licensing.
I dunno if we can mix two in a single header file. In any
case we may do it later on.
Merge series from Herve Codina <herve.codina@bootlin.com>:
Several weeks ago, I sent a series [1] for adding a potentiometer as an
auxiliary device in ASoC. The feedback was that the potentiometer should
be directly handled in IIO (as other potentiometers) and something more
generic should be present in ASoC in order to have a binding to import
some IIO devices into sound cards.
The series related to the IIO potentiometer device is already applied.
This series introduces audio-iio-aux. Its goal is to offer the binding
between IIO and ASoC.
It exposes attached IIO devices as ASoC auxiliary devices and allows to
control them through mixer controls.
On my system, the IIO device is a potentiometer and it is present in an
amplifier design present in the audio path.
Industrial I/O devices can be present in the audio path.
These devices needs to be used as audio components in order to be
fully integrated in the audio path.
This support allows to consider these Industrial I/O devices as
auxiliary audio devices and allows one to control them using mixer
controls.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20230623085830.749991-13-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec supports words that are 16/18/20/24/32 bits long. In case of 24,
it should be treated as 24/24 not 24/32 i.e.: 24 valid bit-depth in 24
bit-depth container.
For compatibility reasons, S24_LE is left as is.
Cc: Zhu Ning <zhuning@everest-semi.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MCLK operates on 24MHz on Intel KabyLake-based platforms. To support
that frequency add new MCLK-LRCK ratio.
While at it, utilize ARRAY_SIZE rather than hardcode to improve
robustness.
Cc: Zhu Ning <zhuning@everest-semi.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230629112449.1755928-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After compiler complains:
sound/soc/codecs/rt5677.c:4748:30: warning: dubious: x | !y
I looked into the code and realized that we can refactor it
for better reading and fixing above issue at the same time.
Hence this change. It does not imply any functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230630172155.83754-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johan Hovold <johan+linaro@kernel.org>:
I've been hitting a race during boot which breaks probe of the sound
card on the Lenovo ThinkPad X13s as I've previously reported here:
https://lore.kernel.org/all/ZIHMMFtuDtvdpFAZ@hovoldconsulting.com/
The immediate issue appeared to be a probe deferral that was turned into
a hard failure, but addressing that in itself only made things worse as
it exposed further bugs.
I was hoping someone more familiar with the code in question would look
into this, but as this affects users of the X13s and breaks audio on my
machine every fifth boot or so, I decided to investigate it myself.
As expected, the Qualcomm codec drivers are broken and specifically leak
resources on component remove, which in turn breaks sound card probe
deferrals.
The source of the deferral itself appears to be legitimate and was
simply due to some audio component not yet having been registered due to
random changes in timing during boot.
These issues can most easily be reproduced by simply blacklisting the
q6apm_dai module and loading it manually after boot.
Included are also two patches that suppresses error messages on
component probe deferral to avoid spamming the logs during boot.
If CONFIG_SND_SOC_WCD934X=y, CONFIG_COMPILE_TEST=y,
CONFIG_MFD_WCD934X=n, CONFIG_REGMAP_IRQ=n:
aarch64-linux-gnu-ld: sound/soc/codecs/wcd934x.o: in function `wcd934x_codec_probe':
wcd934x.c:(.text+0x33cc): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: sound/soc/codecs/wcd934x.o: in function `wcd934x_comp_probe':
wcd934x.c:(.text+0x4cb0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: wcd934x.c:(.text+0x4cc0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: wcd934x.c:(.text+0x4cd0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: wcd934x.c:(.text+0x4ce0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: sound/soc/codecs/wcd934x.o:wcd934x.c:(.text+0x4cf0): more undefined references to `regmap_irq_get_virq' follow
Fix this by making SND_SOC_WCD934X select REGMAP_IRQ.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/cafd878747e7951914a7d9fea33788a4a230d1f0.1688643442.git.geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MBHC resources must be released on component probe failure and
removal so can not be tied to the lifetime of the component device.
This is specifically needed to allow probe deferrals of the sound card
which otherwise fails when reprobing the codec component:
snd-sc8280xp sound: ASoC: failed to instantiate card -517
genirq: Flags mismatch irq 299. 00002001 (mbhc sw intr) vs. 00002001 (mbhc sw intr)
wcd938x_codec audio-codec: Failed to request mbhc interrupts -16
wcd938x_codec audio-codec: mbhc initialization failed
wcd938x_codec audio-codec: ASoC: error at snd_soc_component_probe on audio-codec: -16
snd-sc8280xp sound: ASoC: failed to instantiate card -16
Fixes: 0e5c9e7ff8 ("ASoC: codecs: wcd: add multi button Headset detection support")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-7-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to release allocated MBHC resources also on component remove.
This is specifically needed to allow probe deferrals of the sound card
which otherwise fails when reprobing the codec component.
Fixes: 9fb9b1690f ("ASoC: codecs: wcd934x: add mbhc support")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-6-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocation of the clash control structure may fail so add the missing
error handling to avoid dereferencing an error pointer.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
dB range for HPHL and HPHR gains are from +6dB to -30dB in steps of
1.5dB with register values range from 0 to 24.
Current code maps these dB ranges incorrectly, fix them to allow proper
volume setting.
Fixes: e8ba1e05bd ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705125723.40464-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the I2C controller encounters some problems like timed-out, the codec
driver will report the error code for the first read.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230705042915.24932-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 6085f9e6dc ("ASoC: cs35l45: IRQ support"), without any
other configuration that selects CONFIG_REGMAP_IRQ, modpost errors out
with:
ERROR: modpost: "regmap_irq_get_virq" [sound/soc/codecs/snd-soc-cs35l45.ko] undefined!
ERROR: modpost: "devm_regmap_add_irq_chip" [sound/soc/codecs/snd-soc-cs35l45.ko] undefined!
Add the Kconfig selection to ensure these functions get built and
included, which resolves the build failure.
Cc: stable@vger.kernel.org
Fixes: 6085f9e6dc ("ASoC: cs35l45: IRQ support")
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1882
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230703-cs35l45-select-regmap_irq-v1-1-37d7e838b614@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that the soundwire device used for register accesses has been
enumerated and initialised before trying to read the codec variant
during component probe.
This specifically avoids interpreting (a masked and shifted) -EBUSY
errno as the variant:
wcd938x_codec audio-codec: ASoC: error at soc_component_read_no_lock on audio-codec for register: [0x000034b0] -16
in case the soundwire device has not yet been initialised, which in turn
prevents some headphone controls from being registered.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20230701094723.29379-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johan Hovold <johan+linaro@kernel.org>:
When investigating a race in the wcd938x driver I noticed that the MBHC
impedance measurements where printed at error loglevel which is clearly
wrong.
Fix that, and clean up the logging somewhat by using dev_printk() and
addressing some style issues.
Included are also two patches that drop the bogus inline keywords from
the functions involved.
The compiler is generally better at deciding what functions should be
inlined than driver authors are.
Drop the bogus inline keyword from two functions that were neither very
small or used in a single place.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-6-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Demote the MBHC impedance measurement printk, which is only needed
for development and debugging, to debug level.
While at it, fix the capitalisation of "ohm" and add the missing space
before the opening parenthesis.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-5-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the component structure also to the
wcd938x_mbhc_get_result_params() helper so that the component device can
be used for logging consistently.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The compiler is generally better at deciding what functions should be
inlined than driver authors are.
Drop the bogus inline keyword from two functions that were neither very
small or used in a single place.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Demote the MBHC impedance measurement printk, which is not an error
message, from error to debug level.
While at it, fix the capitalisation of "ohm" and add the missing space
before the opening parenthesis.
Fixes: bcee7ed09b ("ASoC: codecs: wcd938x: add Multi Button Headset Control support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230630142717.5314-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure to resume the codec and soundwire device before trying to read
the codec variant and configure the device during component probe.
This specifically avoids interpreting (a masked and shifted) -EBUSY
errno as the variant:
wcd938x_codec audio-codec: ASoC: error at soc_component_read_no_lock on audio-codec for register: [0x000034b0] -16
when the soundwire device happens to be suspended, which in turn
prevents some headphone controls from being registered.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230630120318.6571-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Loongson
platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP
platforms with NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas
Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1 driver
-----BEGIN PGP SIGNATURE-----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=GuXv
-----END PGP SIGNATURE-----
Merge tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google
Chameleon, Ingenic X1000, Intel systems with various CODECs,
Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton
NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive
JH7110, Texas Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1
driver"
* tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits)
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook
ASoC: hdmi-codec: fix channel info for compressed formats
ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats
ASoC: core: Always store of_node when getting DAI link component
ASoC: tas2781: Fix error code in tas2781_load_calibration()
ASoC: amd: update pm_runtime enable sequence
ALSA: ump: Export MIDI1 / UMP conversion helpers
ASoC: tas2781: fix Kconfig dependencies
ASoC: amd: acp: remove acp poweroff function
ASoC: amd: acp: clear pdm dma interrupt mask
ASoC: codecs: max98090: Allow dsp_a mode
ASoC: qcom: common: add default jack dapm pins
ASoC: loongson: fix address space confusion
ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints
ASoC: tegra: Remove stale comments in AHUB
ASoC: tegra: Use normal system sleep for ASRC
ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio
ASoC: fsl-asoc-card: Allow passing the number of slots in use
ASoC: codecs: wsa884x: Add WSA884x family of speakers
ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
...
SoC support. Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes. Beyond that core framework change
we have the usual pile of clk driver updates such as migrating i2c drivers to
use .probe() again or YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms of
diffstat are the Amlogic and Mediatek drivers because they added new SoC
support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework change may
still shake out some problems after the merge window, mostly because not
everyone tests linux-next where that series has been for some number of weeks.
I saw that there's at least one pending fix for Tegra that needs to be wrapped
up into a proper patch. I'll try to catch those bits before the window closes
so that -rc1 is bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip FPGA clock
drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc" boolean DT
property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050, i.MX8MN,
i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve some
objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L
-----BEGIN PGP SIGNATURE-----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=6M8D
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This batch of clk driver updates contains almost no new SoC support.
Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes.
Beyond that core framework change we have the usual pile of clk driver
updates such as migrating i2c drivers to use .probe() again or
YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms
of diffstat are the Amlogic and Mediatek drivers because they added
new SoC support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework
change may still shake out some problems after the merge window,
mostly because not everyone tests linux-next where that series has
been for some number of weeks. I saw that there's at least one pending
fix for Tegra that needs to be wrapped up into a proper patch. I'll
try to catch those bits before the window closes so that -rc1 is
bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
FPGA clock drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
boolean DT property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050,
i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
some objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
...
Following prints are observed while testing audio on Jetson AGX Orin which
has onboard RT5640 audio codec:
BUG: sleeping function called from invalid context at kernel/workqueue.c:3027
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
preempt_count: 10001, expected: 0
RCU nest depth: 0, expected: 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x1e0/0x270
---[ end trace ad1c64905aac14a6 ]-
The IRQ handler rt5640_irq() runs in interrupt context and can sleep
during cancel_delayed_work_sync().
Fix this by running IRQ handler, rt5640_irq(), in thread context.
Hence replace request_irq() calls with devm_request_threaded_irq().
Fixes: 051dade346 ("ASoC: rt5640: Fix the wrong state of JD1 and JD2")
Cc: stable@vger.kernel.org
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1688015537-31682-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZjIQACgkQJNaLcl1U
h9Dm0wf/X1q4n6KSXLvSyoSUxS/RWzWgyDDX7a4iLcFiov3ehHpVwzhwI/+1xSzs
SGhg6q2rud05SejFBh+2L7HMZfdXWSfW9ukaGz3UsCdqw3/7zAUFgY1RGtjZO4lA
eH50vEME9RbkIDgyxzYe9eViaKGh2fNxIbQ2d9hx6+nIVNfuuSikvGz4K/9PD0DN
2tBgzuIWwrPIbvMV2zHDCycmVG0lqScMWjIrdpDFxa63aPTr920YqYWSoQfOUR1s
j9zlZWnclTjrqRl1GZHxnM8N70vmutZWXAB1WFjal6mmMd6lUG71CyYHvA5h5D0V
ygNpn9B5REYlHBVzI43uT3nog+iS4Q==
=dbjW
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.5
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
According to CTA 861 the channel/speaker allocation info in the
audio infoframe only applies to uncompressed (PCM) audio streams.
The channel count info should indicate the number of channels
in the transmitted audio, which usually won't match the number of
channels used to transmit the compressed bitstream.
Some devices (eg some Sony TVs) will refuse to decode compressed
audio if these values are not set correctly.
To fix this we can simply set the channel count to 0 (which means
"refer to stream header") and set the channel/speaker allocation to 0
as well (which would mean stereo FL/FR for PCM, a safe value all sinks
will support) when transmitting compressed audio.
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20230624165232.5751-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to CTA 861 the channel/speaker allocation info in the
audio infoframe only applies to uncompressed (PCM) audio streams.
The channel count info should indicate the number of channels
in the transmitted audio, which usually won't match the number of
channels used to transmit the compressed bitstream.
Some devices (eg some Sony TVs) will refuse to decode compressed
audio if these values are not set correctly.
To fix this we can simply set the channel count to 0 (which means
"refer to stream header") and set the channel/speaker allocation to 0
as well (which would mean stereo FL/FR for PCM, a safe value all sinks
will support) when transmitting compressed audio.
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20230624165232.5751-1-hias@horus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.
The details of PMIC can be found here[1].
Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.
Return -EINVAL instead of success on this error path.
Fixes: 915f5eadeb ("ASoC: tas2781: firmware lib")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/Message-Id: <729bb6b3-bc1d-4b3d-8b65-077a492c753c@moroto.mountain>
Signed-off-by: Mark Brown <broonie@kernel.org>
The new driver has two modules that both get enabled for build testing
when all codecs are selected. The comlib part has an i2c dependency,
so this remains disabled on builds without i2c, but then the other
one fails to link:
ERROR: modpost: "tasdevice_dev_bulk_write" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_update_bits" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_bulk_read" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_read" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
ERROR: modpost: "tasdevice_dev_write" [sound/soc/codecs/snd-soc-tas2781-fmwlib.ko] undefined!
There are many ways to address this, adding an explicit dependency seems
to be the clearest method that keeps the structure of the driver otherwise
unchanged.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Message-Id: <20230622101205.3180938-1-arnd@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM mode for max98090 is dsp_a compatible with such limitations:
1) Up to four timeslots supported.
2) Only 16 bits timeslots supported.
3) Only 2 active timeslots (L/R) supported.
We want to setup TDM mode only when dsp_a mode is selected. So move
M98090_REG_TDM_FORMAT/M98090_REG_TDM_CONTROL registers setup from
max98090_set_tdm_slot() to the max98090_dai_set_fmt(). Also extend
max98090_set_tdm_slot() with all TDM limitations check.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/Message-Id: <20230622142038.63388-1-fido_max@inbox.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
In converting to using the standard u16_fract type, commit [1] made the
obvious mistake and failed to take account of the difference in
numerator and denominator ordering, breaking all uses of the cs43130
codec.
Fix it.
[1] commit e14bd35ef4 ("ASoC: cs43130: Re-use generic struct u16_fract")
Fixes: e14bd35ef4 ("ASoC: cs43130: Re-use generic struct u16_fract")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230621153229.1944132-1-phil@raspberrypi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a dev_err message. Fix it. Also fix
grammar and add space between last word and (%d)".
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20230620095620.2522058-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
Several of the Everest Semi CODECs only support single register read and
write operations and therefore do not benefit from using the rbtree
cache over the maple tree cache, convert them to the more modern maple
tree cache.
Merge series from Mark Brown <broonie@kernel.org>:
Many of the Realtek I2C/SPI devices only support single register read
and write operations so don't benefit from using the rbtree cache
instead of the more modern maple tree cache, convert them to maple tree.
This seems like a copy and paste bug. Return the correct variable.
It should be "ret" instead of PTR_ERR(max98388->regmap).
Fixes: 6a8e1d46f0 ("ASoC: max98388: add amplifier driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/d44c8388-b12b-4045-95de-0d4bc7b428ac@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98363 driver provides cache defaults for a number of volatile
registers. This is not meaningful, the cache values will never be used so
at best they will just consume memory and at worst they will be used in
preference to real values from the device, remove them.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-mx98363-volatile-v1-1-7acad55f5dd6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-16-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5670 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-15-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5668 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-14-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5665 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-13-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5663 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-12-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5660 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-11-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5651 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-10-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5645 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-9-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5640 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-8-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5631 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-7-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5616 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-6-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5514 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-5-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1308 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-4-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1305 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-3-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1019 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-2-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1011 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-1-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The es8328 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-es-maple-v1-2-45ada77f5643@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The es8316 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-es-maple-v1-1-45ada77f5643@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
smatch reports
sound/soc/codecs/max98388.c:890:39: warning: symbol
'soc_codec_dev_max98388' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/Message-Id: <20230617122635.3225639-1-trix@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The module loads firmware so add MODULE_FIRMWARE macros to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230616115432.1011707-1-juerg.haefliger@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM functions are never referenced when CONFIG_PM_SLEEP is
disabled:
sound/soc/codecs/max98388.c:854:12: error: unused function 'max98388_suspend' [-Werror,-Wunused-function]
static int max98388_suspend(struct device *dev)
^
sound/soc/codecs/max98388.c:864:12: error: unused function 'max98388_resume' [-Werror,-Wunused-function]
static int max98388_resume(struct device *dev)
Fix this by using the modern SYSTEM_SLEEP_PM_OPS() macro in place of
the deprecated SET_SYSTEM_SLEEP_PM_OPS() version, and use pm_sleep_ptr()
to hide the entire structure as well.
On a related note, the of_match_ptr() and ACPI_PTR() macros have the same
problem and would cause the device id table to be unused when the driver
is built-in and the respective subsystems are disabled. This does not
cause warnings unless -Wunused-const-variable is passed to the compiler,
but it's better to just not use the macros at all here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090156.2347850-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Added Analog Devices MAX98388 amplifier driver.
MAX98388 provides a PCM interface for audio data and a standard I2C
interface for control data communication.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Link: https://lore.kernel.org/r/20230613060945.183128-2-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1318 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-sdw-maple-v1-8-85ee50c93905@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1316 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-sdw-maple-v1-7-85ee50c93905@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1308 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-sdw-maple-v1-6-85ee50c93905@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt722 can only support single register read and write operations so
does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-sdw-maple-v1-5-85ee50c93905@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt715 can only support single register read and write operations so
does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-sdw-maple-v1-4-85ee50c93905@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt712 can only support single register read and write operations so
does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-sdw-maple-v1-3-85ee50c93905@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt711 can only support single register read and write operations so
does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-sdw-maple-v1-2-85ee50c93905@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt700 can only support single register read and write operations so
does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-sdw-maple-v1-1-85ee50c93905@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l30 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-10-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs43130 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-9-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l83 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-8-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l73 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-7-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs42l42 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-6-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs4234 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-5-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l35 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-4-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l34 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-3-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l33 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-2-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l32 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Acked-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-cirrus-maple-v1-1-b806c4cbd1d4@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous conversion back to .probe() applied in commit 9abcd24002
("ASoC: Switch i2c drivers back to use .probe()") was created based on
v6.3. Since then two more drivers were added which need to be convert
back in the same way before eventually .probe_new() can be dropped from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230612070608.836186-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The tlv320aic32x4 divider clocks implements a mux with a set_parent
hook, but doesn't provide a determine_rate implementation.
This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidate to
trigger that parent change is a call to clk_set_rate(), with
determine_rate() figuring out which parent is the best suited for a
given rate.
The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.
So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().
The driver does implement round_rate() though, which means that we can
change the rate of the clock, but we will never get to change the
parent.
However, It's hard to tell whether it's been done on purpose or not.
Since we'll start mandating a determine_rate() implementation, let's
convert the round_rate() implementation to a determine_rate(), which
will also make the current behavior explicit. And if it was an
oversight, the clock behaviour can be adjusted later on.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-67-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The tlv320aic32x4 PLL clocks implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.
This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidate to
trigger that parent change is a call to clk_set_rate(), with
determine_rate() figuring out which parent is the best suited for a
given rate.
The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.
So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().
The driver does implement round_rate() though, which means that we can
change the rate of the clock, but we will never get to change the
parent.
However, It's hard to tell whether it's been done on purpose or not.
Since we'll start mandating a determine_rate() implementation, let's
convert the round_rate() implementation to a determine_rate(), which
will also make the current behavior explicit. And if it was an
oversight, the clock behaviour can be adjusted later on.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-66-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The tlv320aic32x4 clkin clock implements a mux with a set_parent hook,
but doesn't provide a determine_rate implementation.
This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.
The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.
Similarly, it doesn't look like the device tree using that clock driver
uses any of the assigned-clock properties on that clock.
So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().
The latter case would be equivalent to setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no
determine_rate implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise.
And if it was an oversight, then we are at least explicit about our
behavior now and it can be further refined down the line.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-46-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use existing define for WSA883X_GLOBAL_PA_ENABLE instead of hard-coded
value, just like in other places in this driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230607171326.179527-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>:
A "known issue" during implementation of SE DMA for spi geni driver was
that it does DMA map/unmap internally instead of in spi framework.
Current patches remove this hiccup and also clean up code a bit.
Testing revealed no regressions and results with 1000 iterations of
reading from EC showed no loss of performance.
Results
=======
Before - Iteration 999, min=5.10, max=5.17, avg=5.14, ints=25129
After - Iteration 999, min=5.10, max=5.20, avg=5.15, ints=25153
The dma pointer must be set to the passed stream pointer, even
if that pointer is NULL.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230601124907.3128170-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX98363 does not support 32bit depth audio.
Removed 32bit from the supported format list.
Instead, added 16bit and 24bit to the list.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Link: https://lore.kernel.org/r/20230601130600.25344-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch is to manage HSD feature for power saving. The detail is to
disable HSD feature after the headset detection is done. When the jack
is inserted, the HSD feature will be enabled again.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230531075334.168637-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series handles a few issues related to the ES8316 audio
codec, discovered while doing some testing on the Rock 5B board.
When using the codec through the generic audio graph card, there are at
least two calls of es8316_set_dai_sysclk(), with the effect of limiting
the allowed sample rates according to the MCLK/LRCK ratios supported by
the codec:
1. During audio card setup, to set the initial MCLK - see
asoc_simple_init_dai().
2. Before opening a stream, to update MCLK, according to the stream
sample rate and the multiplication factor - see
asoc_simple_hw_params().
In some cases the initial MCLK might be set to a frequency that doesn't
match any of the supported ratios, e.g. 12287999 instead of 12288000,
which is only 1 Hz below the supported clock, as that is what the
hardware reports. This creates an empty list of rate constraints, which
is further passed to snd_pcm_hw_constraint_list() via
es8316_pcm_startup(), and causes the following error on the very first
access of the sound card:
$ speaker-test -D hw:Analog,0 -F S16_LE -c 2 -t wav
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Note that all subsequent retries succeed thanks to the updated MCLK set
at point 2 above, which uses a computed frequency value instead of a
reading from the hardware registers. Normally this would have mitigated
the issue, but es8316_pcm_startup() executes before the 2nd call to
es8316_set_dai_sysclk(), hence it cannot make use of the updated
constraints.
Since es8316_pcm_hw_params() performs anyway a final validation of MCLK
against the stream sample rate and the supported MCLK/LRCK ratios, fix
the issue by ensuring that sysclk_constraints list is only set when at
least one supported sample rate is autodetected by the codec.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The following error occurs when trying to restore a previously saved
ALSA mixer state (tested on a Rock 5B board):
$ alsactl --no-ucm -f /tmp/asound.state store hw:Analog
$ alsactl --no-ucm -I -f /tmp/asound.state restore hw:Analog
alsactl: set_control:1475: Cannot write control '2:0:0:ALC Capture Target Volume:0' : Invalid argument
According to ES8316 datasheet, the register at address 0x2B, which is
related to the above mixer control, contains by default the value 0xB0.
Considering the corresponding ALC target bits (ALCLVL) are 7:4, the
control is initialized with 11, which is one step above the maximum
value allowed by the driver:
ALCLVL | dB gain
-------+--------
0000 | -16.5
0001 | -15.0
0010 | -13.5
.... | .....
0111 | -6.0
1000 | -4.5
1001 | -3.0
1010 | -1.5
.... | .....
1111 | -1.5
The tests performed using the VU meter feature (--vumeter=TYPE) of
arecord/aplay confirm the specs are correct and there is no measured
gain if the 1011-1111 range would have been mapped to 0 dB:
dB gain | VU meter %
--------+-----------
-6.0 | 30-31
-4.5 | 35-36
-3.0 | 42-43
-1.5 | 50-51
0.0 | 50-51
Increment the max value allowed for ALC Capture Target Volume control,
so that it matches the hardware default. Additionally, update the
related TLV to prevent an artificial extension of the dB gain range.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the
DMI table, so that active-high jack-detect will work properly on
these laptops.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230529181911.632851-1-edson.drosdeck@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 4.8Mhz 9.6Mhz and 19.2MHz SCLK values
for MCLK 12MHz and 12.288MHz requested by Intel.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230524125236.57149-1-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523165414.14560-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154605.4284-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154605.4284-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmRqh6weHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGXr0H/05UPv+bGw0xIFkj
5sE/uAsEbcQFFm8nsK9/03PUXGpYGNvDS2HO2rfsV0KNJSQDAS1TvXkh3D1S0v6D
ae28lkSl3Nn7YcOQGtdHZp2tSWlP0N0OE6tJlDzM/Q6AcbeoBHlVCg5EJzgd+op6
ScJwUmlwot2jZlYo6UTelr2v0j+C1Hj/t+sqTLY4bqXEybNrJmJDYhRayiqTps+h
+ypOSWdg8paq6UZBoYz0PiomV+E2gXvXtSeVtST9QmpGK9RwvglLB/wkbl+sYNW2
KbAZVrh/Orcm+bKguwf357pwc1Z59aI8/uFgOO8Om5nb4WrE/q7PNyxAHqAzxZDD
UyGwk+g=
=ZihJ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt4J4ACgkQJNaLcl1U
h9DdwAf9G2RRwBf09X767dqIr41cgEG2NWTVX6/4cnFBZhM2uibVpSXZGOd9D+JX
j+wo9gIXYfLlOA5p2AJyxTy5310UZCqea+k9kZ9pFv1gkQlZrGcsvDERNWsWj7Ub
i2bNQyFE54SEfAPNQYtK/Jr5ZOW6/vn0XKALXjosImm03khTCas7zh+YyEJVftbL
ENS/DCCDwpVi54Eud+gN3CHwBIQus3s8c0nVqXOik4teSP2Bo4PFR3LE2zhZxdM0
w9JWSCDjtiPd2tQ5hQ+FokTeJwEFX1JVWIwvfOUeUabaxB5jrDmfFafi91HUwi+W
ZWkWQ+d1oIEAkuAUySUaNQsD01UcqA==
=ywFe
-----END PGP SIGNATURE-----
regulator: Merge up v6.4-rc3
Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.
Merge series from David Rau <David.Rau.opensource@dm.renesas.com>:
This patchset adds the support of DA7219 Jack insertion detection
polarity selection.
The first patch replaces the old txt binding with a new schema binding.
The second patch adds `dlg,jack-ins-det-pty` property for Jack
insertion detection polarity selection.
The last patch adds the driver support for this topic.
The series has been verified on the DA7219 development kit.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
The patch series includes a kselftest fix and changes for extending
driver capability to support more use cases.
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
Series removes the pm_runtime.h inclusion in files where
APIs exported though pm_runtime.h are not used. In case
of files that make use of pm.h which comes form pm_runtime.h
added patch 2/2.
Originally, lineout playback source can only be DAC_3RD. Some SoC
masters only support stereo MTKAIF outputs, so lineout path can't be
used in such case.
MTKAIF connections are as follows.
MOSI0 -> DAC_L
MOSI1 -> DAC_R
MOSI2 -> DAC_3rd
In the patch, lineout playback source can be chosen between DAC_L and
DAC_3rd, so sound can be outputted via lineout even though SoC only
supports stereo MTKAIF outputs.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kselftest tries to read/write the default value. The default register
value of playback gain is 0x1F(mute), but max gain we specified is 0x12.
The range of the control is 0x0~0x12 and mute(0x1F) is only used in the
driver internally. To solve the problem, implement a new callback
mt6359_get_playback_volsw to report user configured volume instead of
the register value.
In addition, update max of "Headset Volume" to 0x12, so it can match the
maximum seen on latest data sheet.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are three output data pins MISO0, MISO1 and MISO2 for mt6359.
UL_SRC should be enabled when MISO0 or MISO1 is used, and UL_SRC_34
should be enabled when MISO2 is used.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support of selecting insertion detection polarity
- Default polarity (Low)
- Inverted polarity (High)
Correct the keywords of parsing `dlg,jack-det-rate`
bases on the new DT binding.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230523161821.4260-4-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where runtime PM support is
not implemented. Use pm.h instead as suspend to RAM specific
implementation is available.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230517094903.2895238-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding pre-charge actions to make FEPGA power stable faster. It
improve the recording quality at the beginning. Thus, it is also
meaningfully to decrease the final adc delay time.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230523083303.98436-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
First two patches are bugfixes.
Third patch skips the overhead of rebooting the amp after applying
firmware files when we know that it isn't necessary.
If the device is in secure mode it's unnecessary to send a SHUTDOWN and
SYSTEM_RESET around the firmware download. It could only be patching
insecure tunings. A tuning patch doesn't need a SHUTDOWN and only needs
a REINIT afterwards. This will reduce the overhead of exiting system
suspend in secure mode.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-4-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire bus accesses must be performed under the guard of a pm_runtime
request, in this case the write was being performed just after the
request had been put() and so the bus could not be guaranteed to be
available.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-3-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each time we go through dsp_work() it does a devm_kasprintf() to
allocate memory to hold the part name string. It's not strictly a memory
leak because devm will free it all if the driver is removed. But we keep
allocating more and more memory to hold the same string.
Move the allocation so that it is performed after the version and
secured state information is gathered and handle allocation errors.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-2-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Paweł Anikiel <pan@semihalf.com>:
The Google Chameleon v3 is a device made for testing audio and video
paths of other devices. This patchset adds support for ASoC audio on
this device. It has two audio sources: HDMI audio from the it68051 chip
(RX only), and analog audio from the ssm2603 chip (RX and TX).
The patchset adds the ASoC platform and codec drivers.
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
The rt5682 driver switches its regmap to cache-only when the
device suspends and back to regular mode on resume. When the
jack detect interrupt fires rt5682_irq() schedules the jack
detect work. This can result in invalid reads from the regmap
in cache-only mode if the work runs before the device has
resumed:
[ 56.245502] rt5682 9-001a: ASoC: error at soc_component_read_no_lock on rt5682.9-001a for register: [0x000000f0] -16
Disable the jack detection interrupt during suspend and
re-enable it on resume. The driver already schedules the
jack detection work on resume, so any state change during
suspend is still handled.
This is essentially the same as commit f7d00a9be1 ("SoC:
rt5682s: Disable jack detection interrupt during suspend")
for the rt5682s.
Cc: stable@kernel.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org
Link: https://lore.kernel.org/r/20230516164629.1.Ibf79e94b3442eecc0054d2b478779cc512d967fc@changeid
Signed-off-by: Mark Brown <broonie@kernel.org
When we run syzkaller we get below Out of Bounds error.
"KASAN: slab-out-of-bounds Read in regcache_flat_read"
Below is the backtrace of the issue:
BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110
Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144
CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W
Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT)
Call trace:
dump_backtrace+0x0/0x4ec
show_stack+0x34/0x50
dump_stack_lvl+0xdc/0x11c
print_address_description+0x30/0x2d8
kasan_report+0x178/0x1e4
__asan_report_load4_noabort+0x44/0x50
regcache_flat_read+0x10c/0x110
regcache_read+0xf8/0x5a0
_regmap_read+0x45c/0x86c
_regmap_update_bits+0x128/0x290
regmap_update_bits_base+0xc0/0x15c
snd_soc_component_update_bits+0xa8/0x22c
snd_soc_component_write_field+0x68/0xd4
tx_macro_put_dec_enum+0x1d0/0x268
snd_ctl_elem_write+0x288/0x474
By Error checking and checking valid values issue gets rectifies.
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com
Link: https://lore.kernel.org/r/20230511112532.16106-1-quic_visr@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org
Split rk808 into a core and an i2c part in preparation for
SPI support.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
Update the driver to use the new ASoC core control notify helper.
This also fixes a bug where the control would not be found if the
CODEC was given a name prefix.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230512122838.243002-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org
Flush the SoundWire interrupt handler work instead of cancelling it.
When a SoundWire interrupt is triggered the pm_runtime is held
until the work has completed. It's therefore unsafe to cancel
the work, it must be flushed.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230512144237.739000-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org
The Analog Devices' SSM3515 is a mono audio amplifier with digital
input, equipped on Apple's 2021 iMacs. Add an ASoC driver for it, and
register both the driver code and schema in MAINTAINERS.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org
Link: https://lore.kernel.org/r/20230511150546.8499-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org
Apply a workaround for what appears to be a hardware quirk.
The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.
This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).
Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
i2cset -y 0 0x1a $(($1*2)) $2
}
For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x87 # out, dac
ssmset 0x06 0x07 # chip
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
(enable MCLK)
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x06 0x1f # chip
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
ssmset 0x06 0x07 # dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
ssmset 0x06 0x07 # out
NOT OK
For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
(enable MCLK after reset)
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
NOT OK
ssmset 0x06 0x07 # chip, out, dac
NOT OK
Signed-off-by: Paweł Anikiel <pan@semihalf.com
Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Link: https://lore.kernel.org/r/20230425095716.331419-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org
regmap has introduced a maple tree based register cache which makes use of
this more advanced data structure which has been added to the kernel
recently. Maple trees are much flatter than rbtrees, meaning that they do
not grow to such depths when the register map is sparse which makes access
a bit more efficient. The maple tree cache type is still a bit of a work
in progress but should be effective for some devices already.
RT5682 seems like a good candidate for maple tree. It only supports single
register read/write operations so will gain minimal benefit from storing
the register data in device native format like rbtree does (none for
SoundWire) and has some sparsity in the register map which is a good fit
for maple tree.
Convert to use maple tree. There should be little if any visible difference
at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org
Link: https://lore.kernel.org/r/20230419-asoc-rt5682-maple-v1-1-ed40369c9099@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org
regmap has introduced a maple tree based register cache which makes use of
this more advanced data structure which has been added to the kernel
recently. Maple trees are much flatter than rbtrees, meaning that they do
not grow to such depths when the register map is sparse which makes access
a bit more efficient. The maple tree cache type is still a bit of a work
in progress but should be effective for some devices already.
RT715 seems like a good candidate for maple tree. It is a SoundWire MBQ
device and therefore supports only single register read/write operations
which do not use raw I/O and will therefore save the cost of converting
to and from device native format when accessing the cache while not having
a negative impact from the current lack of bulk operations in maple tree
cache sync. It has a moderately large and quite sparse register map which
is a good fit for storing in a maple tree.
Convert to use maple tree. There should be little if any visible difference
at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org
Link: https://lore.kernel.org/r/20230412-asoc-rt715-maple-v1-1-200a84835fde@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org
Here are collections of small fixes for rc1.
The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most
of it was merely a code shuffling.
Another significant change here is for ALSA PCM core; it received a
revert and a series of fixes for PCM auto-silencing where it caused
a regression in the previous PR for rc1.
Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
HD-audio and USB-audio, the continued legacy emu10k1 code cleanup,
and some documentation updates.
-----BEGIN PGP SIGNATURE-----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=jd8l
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for rc1.
The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of
it was merely a code shuffling.
Another significant change here is for ALSA PCM core; it received a
revert and a series of fixes for PCM auto-silencing where it caused a
regression in the previous PR for rc1.
Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and
some documentation updates"
* tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence()
ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence()
ALSA: pcm: playback silence - move silence variable updates to separate function
ALSA: pcm: playback silence - remove extra code
ALSA: pcm: fix playback silence - correct incremental silencing
ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode
ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()"
ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop
ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`
ALSA: usb-audio: Add quirk for Pioneer DDJ-800
ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED
ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet
ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x
ASoC: codecs: wcd938x: fix accessing regmap on unattached devices
ALSA: docs: Fix code block indentation in ALSA driver example
ALSA: docs: Extend module parameters description
ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41
ALSA: emu10k1: use more existing defines instead of open-coded numbers
ASoC: amd: yc: Add ASUS M3402RA into DMI table
ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6
...
A small set of fixes and device quirks that have come in during the
merge window, the Qualcomm fix seems quite large but it's mainly code
motion so looks larger than it is.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRU+zUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0IPPB/457WnFOGXv/3FSOfTU4KVznNPOS9NM
7MfpsaI+ZtwhmHUZq/8Vd9+qcrKp4W6oJQa8z95oU+H3UQHmO8S9I4Ae+rqfzKSo
t7Gu/NTWZ89Vhib9w+ACXclFD0wwz5WxRuvZKQhW5iNMpY3S/ha7lBh9KK5Csb6+
JFiCsZcw4uWSdrH7hizZUQwZSZVyk3yoUDVDGOwUhCZ5ZS9N7/I5LQbI77Q1vadS
9H1xtKt6UA8Dq2a9yF7LEvNBb16TfJjGv46BviUdqs/fLGMCROU1wBYDoomAnS1I
iW0OGUwWGie/BAaDj3H1cwH9oEpUBm9wrjuRGf6MSuG/lrJeZOQ4zqIs
=Opld
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
A small set of fixes and device quirks that have come in during the
merge window, the Qualcomm fix seems quite large but it's mainly code
motion so looks larger than it is.
The WCD938x comes with three devices on two Linux drivers:
1. RX Soundwire device (wcd938x-sdw.c driver),
2. TX Soundwire device, which is used to access devices via regmap (also
wcd938x-sdw.c driver),
3. platform device (wcd938x.c driver) - glue and component master,
actually having most of the code using TX Soundwire device regmap.
When RX and TX Soundwire devices probe, the component master (platform
device) bind tries to write micbias configuration via TX Soundwire
regmap. This might happen before TX Soundwire enumerates, so the regmap
access fails. On Qualcomm SM8550 board with WCD9385:
qcom-soundwire 6d30000.soundwire-controller: Qualcomm Soundwire controller v2.0.0 Registered
wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:4 (ops wcd938x_sdw_component_ops)
wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:3 (ops wcd938x_sdw_component_ops)
qcom-soundwire 6ad0000.soundwire-controller: swrm_wait_for_wr_fifo_avail err write overflow
Fix the issue by:
1. Moving the regmap creation from platform device to TX Soundwire
device. The regmap settings are moved as-is with one difference:
making the wcd938x_regmap_config const.
2. Using regmap in cache only mode till the actual TX Soundwire device
enumerates and then sync the regmap cache.
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20230503144102.242240-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr+6wAKCRDdBJ7gKXxA
jn4NAP4u/hj/kR2dxYehcVLuQqJspCRZZBZlAReFJyHNQO6voAEAk0NN9rtG2+/E
r0G29CJhK+YL0W6mOs8O1yo9J1rZnAM=
=2CUV
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly singleton patches all over the place.
Series of note are:
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas"
* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
mailmap: add entries for Paul Mackerras
libgcc: add forward declarations for generic library routines
mailmap: add entry for Oleksandr
ocfs2: reduce ioctl stack usage
fs/proc: add Kthread flag to /proc/$pid/status
ia64: fix an addr to taddr in huge_pte_offset()
checkpatch: introduce proper bindings license check
epoll: rename global epmutex
scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
scripts/gdb: create linux/vfs.py for VFS related GDB helpers
uapi/linux/const.h: prefer ISO-friendly __typeof__
delayacct: track delays from IRQ/SOFTIRQ
scripts/gdb: timerlist: convert int chunks to str
scripts/gdb: print interrupts
scripts/gdb: raise error with reduced debugging information
scripts/gdb: add a Radix Tree Parser
lib/rbtree: use '+' instead of '|' for setting color.
proc/stat: remove arch_idle_time()
checkpatch: check for misuse of the link tags
checkpatch: allow Closes tags with links
...
At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=7XGG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
There is no way to select max98090 from menuconfig right now.
Add a Kconfig menu description to allow building the driver standalone.
It will allow this codec to be used by any other I2S master without
adding extra sound card entry in Kconfig.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230421211950.20972-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
cs35l56_mbox_send() logs a warning when sending a mbox command fails so
the callers can be simplified.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230420102043.1151830-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The es8316 driver uses a register range to specify the single volatile
register it has. While the cost will be in the noise this is a bunch of
overhead compared to just having a volatile_reg() callback so switch to
the callback.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230419-asoc-es8316-volatile-v1-1-2074ec93d8f1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the mixer source defines from CS35L56_INPUT_SRC_SWIRE_RXn
to CS35L56_INPUT_SRC_SWIRE_DP1_CHANNELn to match the latest
datasheet.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mixer source index value for SDW2RX1 is different between
A1 and B0 silicon. As the driver doesn't provide a DAI for SDW2
just remove it as a mixer source option.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reduce SDW1 to 4 channels and remove the controls for SDW1
TX5 and TX6.
The TX5 and TX6 channels have been removed from B0 silicon.
There is no need to support them on A1 silicon.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
EINT20 contains wake-source interrupts and also interface-blocked
interrupts, which all default to unmasked after reset or wake.
The comment in cs35l56_init() only mentioned the wake interrupts.
Update the comment so it's clear that it's intentional to also
mask the *_BLOCKED interrupts.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
clang build reports
sound/soc/codecs/nau8825.c:2826:31: error: overlapping comparisons
always evaluate to false [-Werror,-Wtautological-overlap-compare]
if (nau8825->adc_delay < 125 && nau8825->adc_delay > 500)
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a bug, a logical-or should have been used.
Fixes: fc0b096c92 ("ASoC: nau8825: Add delay control for input path")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230418120955.3230705-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Various code improvements. These remove redundant code and
clean up less-than-optimal original implementations.
The SSM260x chips have an internal MCLK /2 divider (bit D7 in register
R8). Add logic that allows for more MCLK values using this divider.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Link: https://lore.kernel.org/r/20230414140203.707729-7-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs35l56_remove() always returns 0. Two of the functions that call
it are void and the other one should only return 0. So there's no
point returning anything from cs35l56_remove().
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230414133753.653139-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dsp_ready_completion is redundant and can be replaced by a call
flush_work() to wait for cs35l56_dsp_work() to complete.
As the dsp_work is queued by component_probe() it must run before other
ASoC component callbacks and therefore there is no risk of calling
flush_work() before the dsp_work() has been queued.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230414133753.653139-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving the wait from the beginning of the cs35l56_dsp_work() into
cs35l56_component_probe() will prevent the limbo situation that is an
artifact of the two stage SoundWire driver probe and initialisation
where the card is all registered and shows in ALSA but doesn't actually
work because the hardware didn't enumerate.
The other bus drivers perform the probe and init sequentially and are
not susceptible to this issue.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230414133753.653139-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to have such a tight usleep range of 400us and it is
acceptable to allow MIN_US * 2.
Also wrap the usleep in an inline function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168147949455.26.3401634900657387799@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The irq member was being set before calling the init function and then
cs35l56_irq_request() was called only when the init was successful.
However cs35l56_release() calls devm_free_irq() when the irq member is
set and therefore if init() fails then this will cause an attempted free
of an unallocated IRQ.
Instead pass the desired IRQ number to the cs35l56_irq_request()
function and set cs35l56->irq only when it has been successfully
allocated.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168147949598.26.711670799488943454@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the original fixed delay to the assignment from property. It will make
more flexible to different platforms for avoiding pop noise at the beginning
of recording.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230414103941.39566-2-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Configure the default gound switch delay time before enabling IRQ
to avoid the unexpected delay time is set up
- Apply DA7219 AAD own work queue to handle AAD events
- Replace msleep with queue_delayed_work to have better relability
This commit improves the control of ground switches in AAD IRQ
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230413024134.8612-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches adds handling for system suspend.
Patches 1..4 make some code changes that simplify the
suspend implementation, mainly to avoid race conditions.
There are two seperate aspects to suspend, and these have
been done as two patches:
- the main suspend-resume handling,
- re-loading the firmware if necessary after resume.
Check during cs35l56_system_resume() whether the firmware patch must
be applied again.
The FIRMWARE_MISSING flag in the PROTECTION_STATUS register indicates
whether the firmware has been patched.
In non-secure mode the FIRMWARE_MISSING flag is cleared at the end of
dsp_work(). If it is set after system-resume we know that dsp_work()
must be run again.
In secure mode the pre-OS loader will have done the secure patching
and cleared the FIRMWARE_MISSING flag. So this flag does not tell us
whether firmware memory was lost. But the driver could only be
downloading non-secure tunings, which is always safe to do.
If the driver has control of RESET we will have asserted it during
suspend so the firmware patch will have been lost. The driver would only
have control of RESET in non-secure mode.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168122674550.26.8545058503709956172@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete the 'removing' flag and don't kick init_completion to make a
quick cancel of dsp_work(). Just let it timeout on the wait for the
completion.
Simplify the code to standard cancelling or flushing of the work.
This avoids introducing corner cases from a layer of custom signalling.
It also avoids potential race conditions when system-suspend handling
is added.
Unless the hardware is broken, the dsp_work() will already have started
and passed the completion before the driver would want to cancel it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168122674746.26.16881587647873355224@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the main handling for system suspend but does not handle
re-patching the firmware after system resume.
This is a multi-stage suspend and resume because if there is a
RESET line it is almost certain that it will be shared by all the
amps. So every amp must have done its suspend before we can
assert RESET. Likewise we must de-assert RESET before the amps
can resume.
It's preferable to assert RESET before we turning off regulators, and
while they power up.
The actual suspend and resume is done by using the pair
pm_runtime_force_suspend() and pm_runtime_force_resume() to
re-use our runtime suspend/resume sequences.
pm_runtime_force_suspend() will disable our pm_runtime. If we were
runtime-resumed it calls our runtime_suspend().
pm_runtime_force_resume() re-enables pm_runtime and if we were
originally runtime-resumed before the pm_runtime_force_suspend()
it calls our runtime_resume(). Otherwise it leaves us
runtime-suspended.
The general process is therefore:
suspend() -> finish dsp_work and then run our runtime_suspend
suspend_late() -> assert RESET and turn off supplies
resume_early() -> enable supplies and de-assert RESET
resume() -> pm_runtime_force_resume()
In addition, to prevent the IRQ handler running in the period
between pm_runtime_force_suspend() and pm_runtime_force_resume()
the parent IRQ is temporarily disabled:
- from suspend until suspend_noirq
- from resume_noirq until resume
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we are resuming from a system suspend the CS35L56 has probably
been hard reset (usually a power-on reset). So we must wait for the
firmware to boot. On SoundWire we also need it to re-initialize before
we can read the registers to check the CS35L56 state.
The simplest way to handle this is for runtime-resume to always wait
for firmware boot. If the firmware is already booted the overhead is
only one register read.
The system-resume will have to runtime-resume the driver anyway before
attempting any register access. So this will automatically include the
wait for initialization on SoundWire.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the start of dsp_work() only wait for init_completion if !init_done.
This allows system suspend to re-queue dsp_work() without having to
do a dummy complete() of init_completion.
A dummy completion in system suspend would have to be conditional on
init_done. But that would create a possible race condition between our
system resume and cs35l56_init() in the corner case that we suspend right
after the SoundWire core has enumerated and reported ATTACHED.
It is safer and simpler to have cs35l56_init() as the only place that
init_completion is completed, and dsp_work() as the only place that
it is consumed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we use a DAPM widget instead of mute_stream() to send the
PLAY command we can issue the plays to multiple amps in parallel.
With mute_stream each codec driver instance is called one at a
time so we get N * PS0 delay time.
DAPM does each stage on every widget in a card before moving to
the next stage. So all amps will do the PRE_PMU then all will do
the POST_PMU. The PLAY is sent in the PRE_PMU so that they all
power-up in parallel. After the PS0 wait in the first POST_PMU
all the other amps will also be ready so there won't be any extra
delay, or it will be negligible.
There's also no point waiting for the MBOX ack in the PRE_PMU.
We won't see a PS0 state in POST_PMU if it didn't ack the PLAY
command. So we can save a little extra time.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch complains that missing unwind goto in tas5720_codec_probe.
When tas5720 has an invalid devtype, it is expected to invoke
regulator_bulk_disable to handle the failure. But the default
option return an error code directly. Fix it by reusing the
probe_fail label.
Signed-off-by: Ying Liu <lyre@hust.edu.cn>
Link: https://lore.kernel.org/r/20230411170912.1939906-1-lyre@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
- Switch to REGCACHE_FLAT, the whole overhead of RBTREE is not worth it
with non sparse register set in the address range 1..7.
- Move register width to central location
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230410223902.2321834-3-alexander.sverdlin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ELF is acronym and therefore should be spelled in all caps.
I left one exception at Documentation/arm/nwfpe/nwfpe.rst which looks like
being written in the first person.
Link: https://lkml.kernel.org/r/Y/3wGWQviIOkyLJW@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to avoid pop noise which occurs when switching
device from speaker to headphone, the amplifier should
power down first when stopping playback.
Signed-off-by: Long Wang <long.wang@analog.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230406154535.18205-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
smatch reports
sound/soc/codecs/max98363.c:392:39: warning: symbol
'soc_codec_dev_max98363' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230406152300.1954292-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the initial codec driver for rt712 SDCA (Mic topology).
The host should connect with rt712 SdW2 interface.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230406085535.52002-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added Analog Devices MAX98363 SoundWire Amplifier Driver.
The MAX98363 is a SoundWire peripheral device that supports
MIPI SoundWire v1.2-compatible digital interface for audio and
control data.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230330234319.6841-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-14-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-13-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The API requires the stream info to be cleared when the argument is
NULL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the WSA macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230327132254.147975-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the TX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230327132254.147975-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the RX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230327132254.147975-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Hi,
Dependencies
============
For va-macro bindings:
https://lore.kernel.org/r/20221118071849.25506-2-srinivas.kandagatla@linaro.org
NOT a dependency
================
The patchset can be applied independently of my previous fix:
https://lore.kernel.org/linux-arm-msm/20230310100937.32485-1-krzysztof.kozlowski@linaro.org/T/#u
Logically, better if they were together, but code will work fine other way.
Changes since v1
================
1. Move the flag define to common header.
Best regards,
Krzysztof
Krzysztof Kozlowski (9):
ASoC: dt-bindings: qcom,lpass-rx-macro: narrow clocks per variants
ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8550 RX macro
ASoC: codecs: lpass-rx-macro: add support for SM8550
ASoC: dt-bindings: qcom,lpass-tx-macro: narrow clocks per variants
ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8550 TX macro
ASoC: codecs: lpass-tx-macro: add support for SM8550
ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8550 VA macro
ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8550 WSA macro
ASoC: codecs: lpass-wsa-macro: add support for SM8550
.../bindings/sound/qcom,lpass-rx-macro.yaml | 76 +++++++++++++----
.../bindings/sound/qcom,lpass-tx-macro.yaml | 81 +++++++++++++++----
.../bindings/sound/qcom,lpass-va-macro.yaml | 18 +++++
.../bindings/sound/qcom,lpass-wsa-macro.yaml | 23 +++++-
sound/soc/codecs/lpass-macro-common.h | 3 +
sound/soc/codecs/lpass-rx-macro.c | 36 +++++++--
sound/soc/codecs/lpass-tx-macro.c | 35 ++++++--
sound/soc/codecs/lpass-wsa-macro.c | 37 +++++++--
8 files changed, 252 insertions(+), 57 deletions(-)
--
2.34.1
The driver is able to work fine without relying on a mandatory interrupt
being assigned to the I2C device. This is only needed when making use of
the jack-detect support.
However, the following warning message is always emitted when there is
no such interrupt available:
es8316 0-0011: Failed to get IRQ 0: -22
Do not attempt to request an IRQ if it is not available/valid. This also
ensures the rather misleading message is not displayed anymore.
Also note the IRQ validation relies on commit dab472eb93 ("i2c /
ACPI: Use 0 to indicate that device does not have interrupt assigned").
Fixes: 8222576610 ("ASoC: es8316: Add jack-detect support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230328094901.50763-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the WSA macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230313075445.17160-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the TX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230313075445.17160-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the RX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230313075445.17160-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We have unreachable 'return ret' statement in cs35l56_spi_probe(),
delete it as its dead code..
This is found by static analysis with smatch.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230324145535.3951689-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable 'rv' is defined as unsigned type, so the following if
statement is invalid, we can modify the type of rv to int.
if (rv < 0) {
dev_err(cs35l56->dev, "irq: failed to get pm_runtime:
%d\n", rv);
goto err_unlock;
}
./sound/soc/codecs/cs35l56.c:333:5-7: WARNING: Unsigned expression compared with zero: rv < 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4599
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230324022303.121485-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The order in which clocks are stopped matters as some of the clock
like NPL are derived from MCLK.
Without this patch, Dragonboard RB5 DSP would crash with below error:
qcom_q6v5_pas 17300000.remoteproc: fatal error received:
ABT_dal.c:278:ABTimeout: AHB Bus hang is detected,
Number of bus hang detected := 2 , addr0 = 0x3370000 , addr1 = 0x0!!!
Turn off fsgen first, followed by npl and then finally mclk, which is exactly
the opposite order of enable sequence.
Fixes: 1dc3459009 ("ASoC: codecs: lpass: register mclk after runtime pm")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20230323110125.23790-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
The CS35L56 is a high-performance boosted mono audio amplifier.
Supported control interfaces are I2C, SPI or SoundWire.
Supported audio interfaces are I2S/TDM or SoundWire.
The CS35L56 has a self-booting firmware in ROM, with the ability
to patch the firmware and/or apply tunings.
Patches #1 to #7 add support to cs_dsp and wm_adsp for self-booting
firmware and the ability to apply a .bin file without having to
apply a .wmfw.
Adds support for a low-power Hibernation State.
Add support for a low-power hibernation state for the DSP. In
this state the DSP RAM contents are maintained, such that
firmware does not need to be re-downloaded, but the rest of the
chip's register state is lost.
Entry to this state is achieved via the register interface
(either by an external driver using the control port, or the
programmable DSP). Exit from this state is triggered by activity
on device GPIO pins, intended SPI transaction, or I2C
transaction with intended slave address.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167933511185.26.10641185496218226278@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L45 digital core incorporates one programmable DSP block,
capable of running a wide range of audio enhancement and speaker
and battery protection functions.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167933510679.26.5992985447093367768@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L56 combines a high-performance mono audio amplifier, Class-H
tracking inductive boost converter, Halo Core(TM) DSP and a DC-DC boost
converter supporting Class-H tracking.
Supported control interfaces are I2C, SPI or SoundWire.
Supported audio interfaces are I2S/TDM or SoundWire.
Most chip functionality is controlled by on-board ROM firmware that is
always running. The driver must apply patch/tune to the firmware
before using the CS35L56.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This change makes the logging of firmware files more consistent and
simplifies the code - a debug message is logged whether the requested
file was found or not and this applies to both wmfw and bin files.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A self-booted DSP may have a file of coefficients to apply to the device
even when there is no firmware to download.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support self-booting DSPs that are considered always running, the work
that is usually invoked as part of a DAPM sequence needs to be triggered
by a client of wm_adsp as part of it's startup sequence.
These actions load firmware files that might create ALSA controls and
apply configuration to the device.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a DSP can self-boot from ROM it is not necessary to download
firmware - when the DSP has the wmfw_optional flag set not finding a
wmfw firmware file is a successful outcome and not an error condition.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167931140130.26.15590061696793062038@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The no_core_startstop flag indicates a self-booting DSP - they are
considered to be always running and therefore cannot be pre-loaded.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 8 cs35l41 speaker amplifier connected to TDM
in my Xiaomi Mi Pad 5 Pro tablet. In this case, it's necessary
to set 12288000 (48000 * 32 * 8) clk freq for it.
rate=48000, slot_width=32, slots=8.
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: David Rhodes <David.Rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20230318141440.29023-1-lujianhua000@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-62-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-61-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-60-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-59-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-58-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-57-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-56-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-55-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-54-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-53-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-52-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-51-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-50-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-49-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-48-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-47-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-46-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-45-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-44-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-43-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
Coverity reports some UNINIT and CERT STR31-C problems, so we add
initialization and dai id check to resolve problems.
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/zl38060.c:611:34: error: ‘zl38_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/src4xxx-i2c.c:27:34: error: ‘src4xxx_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/rt1019.c:549:34: error: ‘rt1019_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/pcm179x-spi.c:32:34: error: ‘pcm179x_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/adau1977-spi.c:58:34: error: ‘adau1977_spi_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
smatch reports
sound/soc/codecs/sma1303.c:1594:28:
warning: symbol 'sma_i2c_regmap' was not declared. Should it be static?
sma_i2c_regmap is only used in sma1303, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230309140959.2616497-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Coverity shows decaring variable reg without initializer. When
regmap_read returns an error, reg keeps the value left from earlier
computation. To prevent from the unexpected result in the case, assign
0 to reg.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230307040938.7484-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Coverity shows decaring variable reg without initializer. When
regmap_read returns an error, reg keeps the value left from earlier
computation. To prevent from the unexpected result in the case, assign
0 to reg.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230307040938.7484-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144733.1546413-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144732.1546328-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Steam Deck bios old properties. If a Steam deck didn't
upgrade the BIOS, the driver should be able to handle the previous
properties for shared boost types.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230309140051.945329-1-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently only one stream is supported. This isn't usally a problem
until you have a multi codec audio card. Because the audio card will run
startup and shutdown on both capture and playback streams. So if your
hdmi-codec only support either playback or capture. Then ALSA can't open
for playback and capture.
This patch will ignore if startup and shutdown are called with a non
supported stream. Thus, allowing an audio card like this:
+-+
cpu1 <--@-| |-> codec1 (HDMI-CODEC)
| |<- codec2 (NOT HDMI-CODEC)
+-+
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Link: https://lore.kernel.org/r/20230309065432.4150700-2-emas@bang-olufsen.dk
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Lucas Tanure <lucas.tanure@collabora.com>:
Valve's Steam Deck uses CS35L41 in shared boost mode, where both speakers
share the boost circuit.
Add this support in the shared lib, but for now, shared boost is not
supported in HDA systems as would require BIOS changes.
Based on David Rhodes shared boost patches.
Also, fix boost config overwriting in IRQ found in the review and do a
small refactor of the code.
Merge series from richard.leitner@linux.dev:
This series adds support for the clocks properties in the
maxim,max9867 bindings. Furthermore the binding definitions are
converted from txt to yaml.
The clock property is needed to define the mclk for one of our
boards which uses the the i.MX8MP SAI MCLK as clock for the
maxim,max9867.
Merge series from Kamel Bouhara <kamel.bouhara@bootlin.com>:
This small series extends the tas571x driver to support the TAS5733
audio power amplifier.
This patch is support dynamic range compression controls.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Signed-off-by: Seven Lee <scott6986@gmail.com>
Link: https://lore.kernel.org/r/20230217092523.357142-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add basic support for the codecs' mclk.
Enable it on SND_SOC_BIAS_ON, disable it on SND_SOC_BIAS_OFF.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20230302-max9867-v2-3-fd2036d5e825@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shared boost allows two amplifiers to share a single boost circuit by
communicating on the MDSYNC bus.
The passive amplifier does not control the boost and receives data from
the active amplifier.
Shared Boost is not supported in HDA Systems.
Based on David Rhodes shared boost patches.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20230223084324.9076-4-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add cs35l41_error_release function to handle error release sequences.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20230223084324.9076-3-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In error situations, only the internal boost case should be disabled and
re-enabled.
Also, for other boost cases re-enabling the boost to the default internal
boost config is incorrect.
Fixes: 6450ef5590 ("ASoC: cs35l41: CS35L41 Boosted Smart Amplifier")
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20230223084324.9076-2-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we run syzkaller we get below Out of Bound.
"KASAN: slab-out-of-bounds Read in regcache_flat_read"
Below is the backtrace of the issue:
dump_backtrace+0x0/0x4c8
show_stack+0x34/0x44
dump_stack_lvl+0xd8/0x118
print_address_description+0x30/0x2d8
kasan_report+0x158/0x198
__asan_report_load4_noabort+0x44/0x50
regcache_flat_read+0x10c/0x110
regcache_read+0xf4/0x180
_regmap_read+0xc4/0x278
_regmap_update_bits+0x130/0x290
regmap_update_bits_base+0xc0/0x15c
snd_soc_component_update_bits+0xa8/0x22c
snd_soc_component_write_field+0x68/0xd4
tx_macro_digital_mute+0xec/0x140
Actually There is no need to have decimator with 32 bits.
By limiting the variable with short type u8 issue is resolved.
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Link: https://lore.kernel.org/r/20230304080702.609-1-quic_visr@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of various small fixes that have been gathered since
the last PR. The majority of changes are for ASoC, and there is
a small change in ASoC PCM core, but the rest are all for driver-
specific fixes / quirks / updates.
-----BEGIN PGP SIGNATURE-----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=88Cc
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of various small fixes that have been gathered since the
last PR.
The majority of changes are for ASoC, and there is a small change in
ASoC PCM core, but the rest are all for driver- specific fixes /
quirks / updates"
* tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
ALSA: ice1712: Delete unreachable code in aureon_add_controls()
ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()
ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC
ALSA: hda/realtek: Improve support for Dell Precision 3260
ASoC: mediatek: mt8195: add missing initialization
ASoC: mediatek: mt8188: add missing initialization
ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A43)
ASoC: zl38060 add gpiolib dependency
ASoC: sam9g20ek: Disable capture unless building with microphone input
ASoC: mt8192: Fix range for sidetone positive gain
ASoC: mt8192: Report an error if when an invalid sidetone gain is written
ASoC: mt8192: Fix event generation for controls
ASoC: mt8192: Remove spammy log messages
ASoC: mchp-pdmc: fix poc noise at capture startup
ASoC: dt-bindings: sama7g5-pdmc: add microchip,startup-delay-us binding
ASoC: soc-pcm: add option to start DMA after DAI
ASoC: mt8183: Fix event generation for I2S DAI operations
ASoC: mt8183: Remove spammy logging from I2S DAI driver
ASoC: mt6358: Remove undefined HPx Mux enumeration values
ASoC: mt6358: Validate Wake on Voice 2 writes
...
Almost all of this is driver specific fixes and new IDs that have come
in during the merge window. A good chunk of them are simple ones from
me which came about due to a bunch of Mediatek Chromebooks being enabled
in KernelCI, there's more where that came from.
We do have one small feature added to the PCM core by Claudiu Beznea in
order to allow the sequencing required to resolve a noise issue with the
Microchip PDMC driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmP/tTkACgkQJNaLcl1U
h9CmiQf/cNpe4ZCxFQYXW4eucJfHT+qsT9fQongqe2Ash/IL4svBbbvPn4H1oW7i
ce3r8u3RelNfa+H0g9cKD1anADlKresKr95HNl/INTG9g34IuqKA9dZVrXtBMlEz
YCKQbxcR7PiyfI6bImoESGBBe/tm+WEE+mTEndxbtTsFbIsC/a2OORKulU4gzHKF
ZEQBwgfbX/eH0a4xXyFMFxQHehlq/7fB2oEMo3ZCrYrus/NbQMsLFTp1RaPlXFh4
6bVR3DABG9MOzDiQoK86gb4HzADTirkw6cnsLkYRgCZSCLR5qR2xrBnd5ykqsRdg
CZnV9C3sVkRcaTXoZoSbXMSzkbgB2Q==
=IM/h
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.3
Almost all of this is driver specific fixes and new IDs that have come
in during the merge window. A good chunk of them are simple ones from
me which came about due to a bunch of Mediatek Chromebooks being enabled
in KernelCI, there's more where that came from.
We do have one small feature added to the PCM core by Claudiu Beznea in
order to allow the sequencing required to resolve a noise issue with the
Microchip PDMC driver.
Merge series from Mark Brown <broonie@kernel.org>:
This is a collection of fixes I came up after glancing through an
initial test run with the snappily named Kukui Jacuzzi SKU16 Chromebook
on KernelCI. There are more issues flagged, this is just what I fixed
thus far.
Without gpiolib, this driver fails to link:
arm-linux-gnueabi-ld: sound/soc/codecs/zl38060.o: in function `chip_gpio_get':
zl38060.c:(.text+0x30): undefined reference to `gpiochip_get_data'
arm-linux-gnueabi-ld: sound/soc/codecs/zl38060.o: in function `zl38_spi_probe':
zl38060.c:(.text+0xa18): undefined reference to `devm_gpiochip_add_data_with_key'
This appears to have been in the driver since the start, but is hard to
hit in randconfig testing since gpiolib is almost always selected by something
else.
Fixes: 52e8a94baf ("ASoC: Add initial ZL38060 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230227085850.2503725-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The HPx Mux enumerations define values 5, 6 and 7 but describe them as
"undefined" and map them to the value 0 on writing. Given the descriptions
and behaviour it seems that these values are invalid and should not be
present in the register, the current behaviour is detected as problematic
by mixer-test:
# # HPL Mux.0 expected 5 but read 0, is_volatile 0
# # HPL Mux.0 expected 6 but read 0, is_volatile 0
# # HPL Mux.0 expected 7 but read 0, is_volatile 0
Remove the values from the enumeration, this will prevent userspace setting
them.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt6358-quick-fixes-v1-3-747d9186be4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the Wake on Voice 2 control accepts and stores any value written
but it reports that only 0 and 1 are valid values. Reject any out of range
values written by userspace.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt6358-quick-fixes-v1-2-747d9186be4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA control put() operations should return 0 if the value changed so that
events can be generated appropriately for userspace but the custom control
for wake on voice stage 2 doesn't do this, fix it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-asoc-mt6358-quick-fixes-v1-1-747d9186be4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
- Core:
- sdw_transfer_defer() API change to dropan argument
- Reset page address rework
- Exporting sdw_nwrite_no_pm and sdw_nread_no_pm APIs
- Drivers:
- Cadence and related intel driver updates for FIFO handling and
low level msg transfers
-----BEGIN PGP SIGNATURE-----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=LwuQ
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"This is a small update which features a bit of core changes and driver
updates in Intel and cadence driver.
Core:
- sdw_transfer_defer() API change to drop an argument
- Reset page address rework
- Export sdw_nwrite_no_pm and sdw_nread_no_pm APIs
Drivers:
- Cadence and related intel driver updates for FIFO handling and low
level msg transfers"
* tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: cadence: further simplify low-level xfer_msg_defer() callback
soundwire: cadence: use directly bus sdw_defer structure
soundwire: bus: remove sdw_defer argument in sdw_transfer_defer()
soundwire: stream: use consistent pattern for freeing buffers
soundwire: bus: Remove unused reset_page_addr() callback
soundwire: bus: Don't zero page registers after every transaction
soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe()
soundwire: stream: Move remaining register accesses over to no_pm
soundwire: debugfs: Switch to sdw_read_no_pm
soundwire: Provide build stubs for common functions
soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions
soundwire: cadence: remove unused sdw_cdns_master_ops declaration
soundwire: enable optional clock registers for SoundWire 1.2 devices
ASoC/soundwire: remove is_sdca boolean property
soundwire: cadence: Drain the RX FIFO after an IO timeout
soundwire: cadence: Remove wasted space in response_buf
soundwire: cadence: Don't overflow the command FIFOs
soundwire: intel: remove DAI startup/shutdown
The regulators are supposed to be controlled through the
set_bias_level() component callback. Moreover, the regulators are not
enabled during probe and so, this would lead to a regulator unbalanced
use count.
Fixes: ca514c0f12 ("ASOC: Add ADAU7118 8 Channel PDM-to-I2S/TDM Converter driver")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230224104551.1139981-1-nuno.sa@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's been quite a lot of activity this release, but not really
one big feature - lots of new devices, plus a lot of cleanup and
modernisation work spread throughout the subsystem:
- More factoring out of common operations into helper functions
by Morimoto-san.
- DT schema conversons and stylistic nits.
- Continued work on building out the new SOF IPC4 scheme.
- Support for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPuKzoACgkQJNaLcl1U
h9AO6wf/Us32gNLnLhT+YaPKouVq4KYpEXDeaIOdOCgs8RtonuCgURZ/D2TkzBVL
EHLPp4QgqdIWo3FKkWgsXIOpO7R0//cj/vpccJ0PBe4VmvDinXq3dzGPPy6ZbHAS
SatE5zItBKRUHaDliRk6S7IFEqJKwwlBqEzV0K41Q4EstYlIe+No0XIVDj3oRjHb
jPmAD9XRPqsDaFFFb0NrVl9M/8HwBlc3j/Gnt19eJB/07IdgIr0S8mJn3qlFfGqu
O8KgBo4+tvVMCQAxTVZ5exb/qTtK3gEPDuMi0eOKJz+g9wMJ4tRz+D8/8TQSmxmW
lWORmNTx8jml7G4KirxIV4q4Lr0hRQ==
=mB3t
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.3
There's been quite a lot of activity this release, but not really
one big feature - lots of new devices, plus a lot of cleanup and
modernisation work spread throughout the subsystem:
- More factoring out of common operations into helper functions
by Morimoto-san.
- DT schema conversons and stylistic nits.
- Continued work on building out the new SOF IPC4 scheme.
- Support for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1.
Remove the sleep control in IRQ thread
and create an individual task to handel it for Jack plug in event.
This commit improves the control of ground switches in the AAD IRQ.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230215101045.21456-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to have a separate module for the tables file it just
holds regmap callbacks and register patches used by the main part of the
driver. Remove the separate module and merge it into the main driver
module.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230215105818.3315925-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify code by using min helper macro for logical evaluation and value
assignment. The change also facilitates code realignment for improved
readability.
Proposed change is identified using minmax.cocci Coccinelle script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y+p2Hn0nrtHiKwPR@ubun2204.myguest.virtualbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682s driver switches its regmap to cache-only when the
device suspends and back to regular mode on resume. When the
jack detect interrupt fires rt5682s_irq() schedules the jack
detect work. This can result in invalid reads from the regmap
in cache-only mode if the work runs before the device has
resumed:
[ 19.672162] rt5682s 2-001a: ASoC: error at soc_component_read_no_lock on rt5682s.2-001a for register: [0x000000f0] -16
Disable the jack detection interrupt during suspend and
re-enable it on resume. The driver already schedules the
jack detection work on resume, so any state change during
suspend is still handled.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230209012002.1.Ib4d6481f1d38a6e7b8c9e04913c02ca88c216cf6@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
When the 'ti,gpio-config' property is not defined, the
device_property_count_u32() will return an error, rather than zero.
The current check, only handles a return value of zero, which assumes that
the property is defined and has nothing defined.
This change extends the check to also check for an error case (most likely
to be hit by the case that the 'ti,gpio-config' is not defined).
In case that the 'ti,gpio-config' and the returned 'gpio_count' is not
correct, there is a 'if (gpio_count != ADCX140_NUM_GPIO_CFGS)' check, a few
lines lower that will return -EINVAL.
This means that someone tried to define 'ti,gpio-config', but with the
wrong number of GPIOs.
Fixes: d521432149 ("ASoC: tlv320adcx140: Add support for configuring GPIO pin")
Signed-off-by: Steffen Aschbacher <steffen.aschbacher@stihl.de>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230213073805.14640-1-alex@shruggie.ro
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the function name aw88395_plack_event to aw88395_playback_event
Signed-off-by: Ben Yi <yijiangtao@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230213093649.22928-2-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hopefully the last one for 6.2, a collection of the fixes that have
been gathered since the last PR. All changes are small and trivial
device-specific fixes.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmPknxUOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8A+BAAqAgryk1HDUJz5QeTH4sHwphhrqnSlIwIRFop
LcUBHXRKoOfmJsVfKq80JLuRkUmdUojKUc2t32XTxdcybPEARFz8VSIzIsWZGwzG
UDEpsK41ItpySCl3FhIE9oNfgFp68HzZhoHvKt21DdUg2kVTF63nBVaC/3ao3YIS
FrPhpLco78w40HDiGFM7bInFLn52Gyi/yS5eva6RwRIZ4xPg/jYYO+z9d2xCsboC
iL45AyeV2r6yIAK8ESxgDj3qyEUJIMYMKj4BDJVVENstLQ4Rj5UspP/na5l1Qv/0
c/2cYwkdU8vq4hdrqI5C5gN+h2VOUalowUDRfvjR44gLGz2jIA3+iAWzIhMHZ1Hs
888giJFPD8H/2xErVwU1jlYj0YxhvX0C1vlUQzSHsgjeY9HTwt4IN52u2LaMVyog
76NUcopoSaqAeZDfSjn4/X22QvKijHe0/NVtAF2s18uTQQ6z13q0XLs74PI67Fyd
AOZZcJrLWezbzHHq/ssRiQb47tSzmCEHiAAuzN7VxGPv+2cNvsw/Epi+pq1bKztz
AapPKeyIPng08Perws2ZMh+Psg6rL2ap6Y3hW/WbnXS4/7e1fb9s//JAdIKDMOK2
YlSq/KGjmOAzkFWDxtxLY5wsMFR0UiBN1P+ZGbeG0o5rWufPW8N1nO1H9D6lXlTk
zG5CVXE=
=fz1j
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last one for 6.2, a collection of the fixes that have
been gathered since the last pull.
All changes are small and trivial device-specific fixes"
* tag 'sound-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add Positivo N14KP6-TG
ASoC: topology: Return -ENOMEM on memory allocation failure
ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()
ASoC: fsl_sai: fix getting version from VERID
ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.
ALSA: hda/realtek: Add quirk for ASUS UM3402 using CS35L41
ASoC: codecs: es8326: Fix DTS properties reading
ASoC: tas5805m: add missing page switch.
ASoC: tas5805m: rework to avoid scheduling while atomic.
ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9
ASoC: SOF: amd: Fix for handling spurious interrupts from DSP
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro 360
ALSA: pci: lx6464es: fix a debug loop
ASoC: rt715-sdca: fix clock stop prepare timeout issue
This patch fixes
1. coding style issues
2. check if the setting was set already in rt712_sdca_mux_put callback
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230210082141.24077-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
From q6dsp side issues are around locking of position pointer and handle
From LPASS codec side most of the staiblity issues were around runtime pm,:
While testing X13s audio, we found multiple stablity issues this patchset
fixes these issues.
From q6dsp side issues are around locking of position pointer and handle
multiple prepare cases along with pulse audio timerbased scheduling workaround.
From LPASS codec side most of the staiblity issues were around runtime pm,
hitting various issues as the codec was firstly resetting the soundwire block
for every clk disable/enable which is taking the slaves out of sync and
resulting in re-enumerating. Second issue was around fsgen clk is not
brining up the codec out of suspend as it was not added after
runtime pm enabled. Final issue was with codec mclk rate which should
have been 192KHz same as npl instead of 96KHz. We were getting lucky as
wsa drivers are setting the same clk to 192KHz.
With this patches, x13s audio is pretty stable.
Merge series from Herve Codina <herve.codina@bootlin.com>:
The Infineon PEB2466 codec is a programmable DSP-based four channels
codec with filters capabilities.
It also provides signals as GPIOs.
This is the initial codec driver for rt712 SDCA (Jack+Amp topology).
The host should connect with rt712 SdW1 interface.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230207090946.20659-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simple-card/audio-graph-card drivers do not handle MCLK clock when it
is specified in the codec device node. The expectation here is that,
the codec should actually own up the MCLK clock and do necessary setup
in the driver.
This is inspired from,
commit dbf54a9534 ("ASoC: rt5659: Update MCLK rate in set_sysclk()").
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1675953417-8686-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Infineon PEB2466 codec is a programmable DSP-based four channels
codec with filters capabilities.
It also provides signals as GPIOs.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230206144904.91078-3-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
resetting soundwire block will put the slaves out of sync and result
in re-enumeration during fsgen disable/enable path this is totally
unnecessary and resulting fifo overflows.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason we ended up with incorrect mclk rate which should be
1920000 instead of 96000, So far we were getting lucky as the same clk
is set to 192000 by wsa and va macro. This issue is discovered when there
is no wsa macro active and only rx or tx path is tested.
Fix this by setting correct rate.
Fixes: c39667ddcf ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Fixes: af3d54b997 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230209122806.18923-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Daniel Beer <daniel.beer@igorinstitute.com>:
This pair of patches fixes two issues which crept in while revising the
original submission, at a time when I no longer had access to test
hardware.
The fixes here have been tested and verified on hardware.
The val is defined as unsigned int type, if(val<0) is redundant, so
delete it.
sound/soc/codecs/idt821034.c:449 idt821034_kctrl_gain_put() warn: unsigned 'val' is never less than zero.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3947
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230206075518.84169-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports
sound/soc/codecs/aw88395/aw88395_lib.c:789:6: error: Uninitialized variable: cur_scene_id [uninitvar]
if (cur_scene_id == 0) {
^
Passing a garbage value to aw_dev_parse_data_by_sec_type_v1() will cause a crash
when the value is used as an array index. This check assumes cur_scene_id is
initialized to 0, so initialize it to 0.
Fixes: 4345865b00 ("ASoC: codecs: ACF bin parsing and check library file for aw88395")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230205015733.1721009-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Seems like properties parsing and reading was copy-pasted,
so "everest,interrupt-src" and "everest,interrupt-clk" are saved into
the es8326->jack_pol variable. This might lead to wrong settings
being saved into the reg 57 (ES8326_HP_DET).
Fix this by using proper variables while reading properties.
Signed-off-by: Alexey Firago <a.firago@yadro.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com
Link: https://lore.kernel.org/r/20230204195106.46539-1-a.firago@yadro.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In tas5805m_refresh, we switch pages to update the DSP volume control,
but we need to switch back to page 0 before trying to alter the
soft-mute control. This latter page-switch was missing.
Fixes: ec45268467 ("ASoC: add support for TAS5805M digital amplifier")
Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com>
Link: https://lore.kernel.org/r/1fea38a71ea6ab0225d19ab28d1fa12828d762d0.1675497326.git.daniel.beer@igorinstitute.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's some setup we need to do in order to get the DSP initialized,
and this can't be done until a bit-clock is ready. In an earlier version
of this driver, this work was done in a DAPM callback.
The DAPM callback doesn't guarantee that the bit-clock is running, so
the work was moved instead to the trigger callback. Unfortunately this
callback runs in atomic context, and the setup code needs to do I2C
transactions.
Here we use a work_struct to kick off the setup in a thread instead.
Fixes: ec45268467 ("ASoC: add support for TAS5805M digital amplifier")
Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com>
Link: https://lore.kernel.org/r/85d8ba405cb009a7a3249b556dc8f3bdb1754fdf.1675497326.git.daniel.beer@igorinstitute.com
Signed-off-by: Mark Brown <broonie@kernel.org>
