When the DMA mode is changed on the (still real!) SB AWE32 after
playing a stream and closing, the previous DMA setup was still
silently kept, and it can confuse the hardware, resulting in the
unexpected noises. As a workaround, enforce the disablement of DMA
setups when the DMA setup is changed by the kcontrol.
https://bugzilla.kernel.org/show_bug.cgi?id=218185
Link: https://patch.msgid.link/20250610064322.26787-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Nothing calls snd_msndmidi_new()
thus nothing sets chip->msndmidi_mpu
The call to snd_msndmidi_input_read is gated on that being set,
so snd_msndmidi_input_read() won't be called either.
This is probably a missing call to snd_msndmidi_new(), but since
this is ancient code, it's probably best to remove it (especially
since I don't have the hardware to test it).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250511172957.1001583-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_gus_use_dec(), snd_gus_use_inc() and snd_gf1_print_voice_registers()
last uses were removed in 2007 by
commit e5723b41ab ("[ALSA] Remove sequencer instrument layer")
Remove them.
While there, remove big #if 0 blocks next to the code being deleted.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250508000225.195766-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-37-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-36-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The device pointer is stored in struct soundscape for calling
dev_*().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-35-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some functions are changed to receive a device pointer to be passed to
dev_*() calls.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-34-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some functions are changed to receive snd_card pointer for referring
to the device pointer for dev_*() calls, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-31-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The card pointer is stored in struct snd_opti9xx and snd_miro to be
referred for dev_*() calls.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-30-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The card pointer is stored in struct snd_opl3sa2 to be referred for
dev_*() calls.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-29-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-28-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some commented-out debug prints and dead code are dropped as well.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-27-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
For referring to the device, introduce snd_card pointer to struct
snd_es18xx.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-26-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
For referring to the device, introduce snd_card pointer to struct
snd_es1688.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-25-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-24-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-23-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-22-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-21-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Use the standard print API instead of open-coded printk().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-20-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-19-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-5-tiwai@suse.de
