On a motherboard with an AMD Granite Ridge CPU there is a report
that 3.5mm microphone and headphones aren't working. In the
log it's observed:
snd_hda_intel 0000:02:00.6: Skipping the device on the denylist
This was because of commit df42ee7e22 ("ALSA: hda: Add ASRock
X670E Taichi to denylist"). Reverting this commit allows the
microphone and headphones to work again. As at least some combinations
of this motherboard do have applicable devices, revert so that they
can be probed.
Cc: Richard Gong <richard.gong@amd.com>
Cc: Juan Martinez <juan.martinez@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250813140427.1577172-1-superm1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a PCI quirk to enable microphone input on the headphone jack on
the HONOR BRB-X M1010 laptop.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250811132716.45076-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Framework Laptop 13 (AMD Ryzen AI 300) requires the same quirk for
headset detection as other Framework 13 models.
Signed-off-by: Christopher Eby <kreed@kreed.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250810030006.9060-1-kreed@kreed.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmiV1PUACgkQEacuoBRx
13IQvQ//Rhl2xC/DKUHb8wR8yOyMRUQ2tmD8hM+lrS0Dej7mJ91e4SJpqxtQck+c
mNeiMG1JLSrN+2RCWzinPR6ha7ML8Zu8XP1OxG5EDD06hyWAKHI6CF/PIeZX7Sy4
xMlSpH/brRInj3NBaBLdlompqfe2CVUFW2ahvovE97oz7l+nKEZUa5r3Gw7lHcRz
bmbQ0FLKfYsAz9hzD0pc8wcralp5ggyiiGcdZI8U2YCAUKLV5M/FhMuU/M0jEiJi
iYtr2OQJijtSWDP2i81aQj/ZsdW5gfCCiGSAoeVdcRLAL0bLHLCR8Wird+0DWCGO
UHJg+Ed0+84+sahuoU07vYyDM1T92vUDwjAkr8H65+U7u4cHjoj4fYi6104Fbh0J
/1deR53z6vhObFkZmh61lv63SES9xzOfM6FJP1UUMwtG40JQcZNYnHDFAD3V5wvN
Gi1gVub9L5TKSJMsJHirtsk+QT6KnInVxzXcgqC09XxhuEvA+MC+Qkee+P8bbaAU
mcOR4conQzcoWuv/Y0GCGJ3CpvHhCmcBfL1MdtjFWHipG4LhlIVtRCJDRAx2Q5oY
C4vQterv4r9mXomAs4ykRlEdCnXvldv9PN8lKQ0KMendwTv4A4xG8o6IEoYSb90R
q7CNQjxjyr77ovRbcfSoAZrcRG4oP3nGhSQsdv85wHZU5XbJXoU=
=MulZ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
A few more small fixes for 6.17-rc1.
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio
and USB-audio drivers
-----BEGIN PGP SIGNATURE-----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=DJJ8
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio and
USB-audio drivers
* tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/ca0132: Fix missing error handling in ca0132_alt_select_out()
ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies
ALSA: hda/tas2781: Support L"SmartAmpCalibrationData" to save calibrated data
ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
ALSA: hda/realtek: add LG gram 16Z90R-A to alc269 fixup table
ALSA: usb-audio: Don't use printk_ratelimit for debug prints
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKU
ASoC: tas2781: Fix the wrong step for TLV on tas2781
ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platform
ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platform
ASoC: amd: ps: Add SoundWire pci and dma driver support for acp7.2 platform
ASoC: SOF: amd: Add sof audio support for acp7.2 platform
ASoC: Intel: avs: Fix uninitialized pointer error in probe()
ASoC: wm8962: Clear master mode when enter runtime suspend
ASoC: SOF: amd: acp-loader: Use GFP_KERNEL for DMA allocations in resume context
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The split of Cirrus HD-audio codec driver may confuse users when
migrating from the previous kernel configs and leave the needed
drivers disabled. Although we've already set y as default, it's still
safer to paper over the wrong choices.
This patch marks the prompt of split CS420x and CS421x codec drivers
with CONFIG_EXPERT, so that they are all enabled when the top-level
CONFIG_SND_HDA_CODEC_CIRRUS is set.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
This patch adds the missing help text to the top-level
CONFIG_SND_HDA_CIRRUS_CODEC together with the explanation of
individual choices, and corrects the help texts that don't fit well
nowadays, too.
Fixes: 1cb8744a36 ("ALSA: hda/cirrus: Split to cs420x and cs421x drivers")
Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250806192541.21949-4-tiwai@suse.de
The split of HDMI codec driver may confuse users when migrating from
the previous kernel configs and leave some drivers disabled
unexpectedly. Although we've already set y to all HDMI codec drivers
as default, it's still safer to paper over the wrong choices.
This patch marks the prompt of each HDMI codec driver with
CONFIG_EXPERT, so that they are all enabled when the top-level
CONFIG_SND_HDA_CODEC_HDMI is set.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
The patch also adds the missing help text to the top-level
CONFIG_SND_HDA_CODEC_HDMI together with the explanation of individual
choices, too.
Fixes: 73cd049081 ("ALSA: hda/hdmi: Split vendor codec drivers")
Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250806192541.21949-3-tiwai@suse.de
The split of Realtek HD-audio codec driver may cause confusions
especially when migrating from the previous kernel configurations
because it's hard to know which driver to be enabled.
Although we've already set default=y for those codec drivers, it may
still make people changing the stuff unnecessarily without knowing its
side effect.
This patch is for avoiding such pitfalls by marking the prompt of each
Realtek codec driver with CONFIG_EXPERT. For "normal" users (that is,
unless CONFIG_EXPERT is set), all Realtek HD-audio codecs are enabled
together with CONFIG_SND_HDA_CODEC_REALTEK; this is the very same
situation like the previous kernels, after all.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
The patch also adds the missing help text to the top-level
CONFIG_SND_HDA_CODEC_REALTEK together with the explanation of
individual choices, too.
Fixes: aeeb85f26c ("ALSA: hda: Split Realtek HD-audio codec driver")
Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250806192541.21949-2-tiwai@suse.de
There are a couple of cases where the error is ignored or the error
code isn't propagated in ca0132_alt_select_out(). Fix those.
Fixes: def3f0a5c7 ("ALSA: hda/ca0132 - Add quirk output selection structures.")
Link: https://patch.msgid.link/20250806094423.8843-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some devices save the calibrated data into L"CALI_DATA", and others into
L"SmartAmpCalibrationData". Driver code will support both.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250805070945.524-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=ipv3
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
For catching up the remaining stuff for 6.17: only small updates
and the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations
can be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix
-----BEGIN PGP SIGNATURE-----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=Q+iZ
-----END PGP SIGNATURE-----
Merge tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
Like other HD-audio codec drivers, HD-audio HDMI codec driver was
split to multiple drivers, and now users are forced to choose the
right kconfig items.
For smoother upgrade path, keep the previous CONFIG_SND_HDA_CODEC_HDMI
as the meuconfig, so that the kconfig can be taken over from the
previous config. The all belonging HDMI codec drivers are enabled as
default as long as CONFIG_SND_HDA_CODEC_HDMI is set.
This is only about the default config, and each driver can be still
disabled if user wants to reduce the size, too.
The kconfig for the generic HDMI driver is changed to
CONFIG_SND_HDA_CODEC_HDMI_GENERIC along with this action.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250730064639.25617-4-tiwai@suse.de
Like HD-audio Realtek drivers, Cirrus Logic HD-audio codec driver was
split to multiple drivers, too, and now users are forced to choose the
right kconfig items.
For smoother upgrade path, keep the previous
CONFIG_SND_HDA_CODEC_CIRRUS as the menuconfig.
The new kconfig CONFIG_SND_HDA_CODEC_CS42* are enabled as default, as
long as CONFIG_SND_HDA_CODEC_CIRRUS is set, so that the system with
Cirrus codec can keep working.
This is only about the default config, and each driver can be still
disabled if user wants to reduce the size, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250730064639.25617-3-tiwai@suse.de
The recent split of Realtek HD-audio driver forced users to choose the
right Kconfigs, but most users have no idea which ones to enable.
Although the distros tend to enable all of them, individual users may
have their own favorites and miss something needed via the version
upgrade.
For smoother upgrade path from the previous kernel configuration, now
we take the following changes:
- CONFIG_SND_HDA_CODEC_REALTEK (which is a menuconfig) is changed from
bool to tristate again, so that it can take over from the previous
config gracefully.
- CONFIG_SND_HDA_CODEC_ALC* receive "default y", so that they are
enabled as default as long as CONFIG_SND_HDA_CODEC_REALTEK is set.
Those can be still disabled if users want to reduce the size, too.
At least this allows users to run "make oldconfig" and push RETURN
blindly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250730064639.25617-2-tiwai@suse.de
My friend have Victus 16-d1xxx with board ID 8A26, the existing quirk
for Victus 16-d1xxx wasn't working because of different board ID
Tested on Victus 16-d1015nt Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-4-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-S0063NT Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial idea of making them const was correct as they were seperate
instances. When they got embedded into larger data structures, which are
even modified by the callback this got moot. The only reason why this went
unnoticed is that the required container_of() casts the const attribute
forcefully away.
Stop pretending that it is const.
-----BEGIN PGP SIGNATURE-----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=C0ua
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide cleanup of struct cycle_counter const annotations.
The initial idea of making them const was correct as they were
seperate instances. When they got embedded into larger data
structures, which are even modified by the callback this got moot. The
only reason why this went unnoticed is that the required
container_of() casts the const attribute forcefully away.
Stop pretending that it is const"
* tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/timecounter: Fix the lie that struct cyclecounter is const
The wrong register was used for digital volume control of TAS2770,
The definition was changed, and usage was also updated.
Fixes: ab29b3460c ("ALSA: hda: Add TAS2770 support")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250729145849.55057-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-r1xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250725151436.51543-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add TAS2770 support in TI's HDA driver. And add hda_chip_id for
more products. Distinguish DSP and non-DSP in firmware
loading function.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250723142423.38768-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The inline pci_is_display() helper does the same thing. Use it.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patch.msgid.link/20250717173812.3633478-6-superm1@kernel.org
Use a safer function strscpy() instead of strcpy() for copying to
arrays.
Only idiomatic code replacement, and no functional changes.
Link: https://patch.msgid.link/20250711083051.18759-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error from snd_hda_codec_init() was ignored in
snd_hda_codec_build_controls(), which should have been taken account
and abort the flow. Fix it now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-28-tiwai@suse.de
After all conversions, driver->ops became a must in most places
(except for the codec power setup which might be called before binding
to the codec driver), hence we can get rid of the superfluous
driver->ops NULL checks, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-26-tiwai@suse.de
Now that all patch_ops usage have been converted to the new
hda_codec_ops probe, we can drop patch_ops from the hda_codec,
together with the calls of patch_ops callbacks.
The hda_codec_ops.free callback is removed as all have been replaced
with the new remove callback.
Also, correct comments mentioning "patch"; it's replaced with "codec
driver".
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-25-tiwai@suse.de
Convert the HDMI codec drivers to use the new hda_codec_ops probe.
The Intel and Nvidia-MCP HDMI drivers needed slightly more changes to
deal with the unified callbacks among all models.
Also another non-trivial change is Intel driver's set_power_state
callback. An additional NULL check of codec->spec is needed there
since the set_power_state() may be called before the probe gets called
(e.g. in ASoC hda codec hda_codec_probe()).
Other than that, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-24-tiwai@suse.de
Convert the CS8409 codec driver to use the new hda_codec_ops probe.
The Dolphin support needs an override of unsol_event callback, and
redirect via spec->unsol_event function pointer for now.
Other than that, no functional changes.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-17-tiwai@suse.de
Since the codec ops for CS420x and CS421x are fairly independent,
split the cirrus codec driver into two drivers, snd-hda-codec-cs420x
and snd-hda-code-cs421x. Together with the split, convert to the new
hda_codec_ops probe.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-16-tiwai@suse.de
Convert the Analog Device codec driver to use the new hda_codec_ops
probe. The probe function had to be unified and branched with the
model type specified via driver_data instead.
Other than that, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-14-tiwai@suse.de
Convert the C-Media codec driver to use the new hda_codec_ops probe.
Since the CM9825 uses a completely different probe and codec ops,
factor out to an individual codec driver, snd-hda-codec-cm9825.
Other than that, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-13-tiwai@suse.de
Until now, we use "patch_ops" embedded in hda_codec object for
defining the callbacks that are used in various places to manage
HD-audio codec. But from the device driver POV, this should have been
rather the driver ops, instead of the callbacks in the codec object.
This patch defines the driver ops for HD-audio codec driver as the
replacement. We reuse the same struct hda_codec_ops, and this is put
as hda_codec_driver.ops. When the driver->ops callbacks are defined,
they are called primarily instead of codec->patch_ops callbacks.
With converting to the driver ops, there is no need to pass the ugly
patch_ops handling in hda_device_id tables. That is, driver_data
field of hda_device_id becomes really optional and it can be used for
passing the codec-specific data (e.g. specifying a model).
The codec entries after the conversion should be with HDA_CODEC_ID()
and co, instead of the former HDA_CODEC_ENTRY().
Once after converting all codec drivers to use driver ops, we can get
rid of codec patch_ops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-10-tiwai@suse.de
In the past, we unified HD-audio HDMI codec driver once with a slight
hope that more vendors will follow the standard, but in reality, the
driver received more and more vendor-specific code. In order to make
the messy code a bit more understandable, this patch splits the HDMI
codec driver into multiple drivers again.
Namely, the vendor-specific code for Intel, AMD and Nvidia are moved
into the own drivers, while we split the common HDMI code to two
drivers, the generic HDMI driver and the simple HDMI driver.
So, now we have:
- The generic HDMI driver (snd-hda-codec-hdmi):
providing the common helpers, also supports Glenfly HDMI codecs and
some other codecs that don't need vendor-specific stuff
- The simple HDMI driver (snd-hda-codec-simplehdmi):
devices with no dynamic PCM assignment and with fixed channels,
mostly used by some other drivers, but this driver alone suffices
for VIA HDMI codec support, too
- Intel HDMI driver (snd-hda-codec-intelhdmi):
bound with i915 / Xe DRM, based on the generic HDMI driver
- AMD/ATI HDMI driver (snd-hda-codec-atihdmi):
optionally bound with radeon / amdgpu DRM, based on the generic HDMI
driver
- Nvidia HDMI driver (snd-hda-codec-nvhdmi);
optionally bound with nouveau DRM, based on the generic HDMI driver
- Legacy Nvidia HDMI driver (snd-hda-codec-nvhdmi-mcp):
for 2ch or 8ch outputs, based on the simple HDMI driver
- Nvidia Tegra HDMI driver (snd-hda-codec-tegrahdmi):
based on the generic HDMI driver
Along with the driver split, the enable_silent_stream module option is
moved to snd-hda-codec-intelhdmi, too, as it's an Intel-specific
feature.
Most of the changes here are just to split and move the code to
different files, as well as to rename/expose the functions that are
commonly used by drivers.
The silent stream handling code is slightly modified for putting the
stuff into Intel driver; now a new callback "silent_stream" is defined
in hdmi_ops, and it's called in silent_stream_enable() and *_disable()
functions. The runtime-PM handling in silent_stream_enable() was
cleaned up, and rather taking the runtime PM refcount in the
silent_stream() callback appropriately, instead.
Other than that, there should be no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-9-tiwai@suse.de
