Add support for parsing `pub`, `pub(crate)` and `pub(super)` to the
derive macro `Zeroable`.
Link: e8311e52ca
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
The previous link anchor was broken in rust 1.77, because the
documentation was refactored in upstream rust.
Change the link to refer to the new section in the rust documentation.
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: a146142fe1
[ Fixed commit authorship. - Benno ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Add Changelog entry for the `Wrapper` trait and document the
`unsafe-pinned` feature in the Readme.
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: 986555f564
[ Fixed commit authorship. - Benno ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Add the `unsafe-pinned` feature which gates the `Wrapper`
implementation of the `core::pin::UnsafePinned` struct.
For now this is just a cargo feature, but once `core::pin::UnsafePinned`
is stable a config flag can be added to allow the usage of this
implementation in the linux kernel.
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: 99cb193442
[ Fixed commit authorship. - Benno ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
This trait allows creating `PinInitializers` for wrapper or new-type
structs with the inner value structurally pinned, when given the
initializer for the inner value.
Implement this trait for `UnsafeCell` and `MaybeUninit`.
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: 3ab4db083b
[ Reworded commit message into imperative mode, fixed typo and fixed
commit authorship. - Benno ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
These functions cast the given pointer from one type to another. They
are particularly useful when initializing transparent wrapper types.
Link: 80c03ddee4
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
`XArray` is an efficient sparse array of pointers. Add a Rust
abstraction for this type.
This implementation bounds the element type on `ForeignOwnable` and
requires explicit locking for all operations. Future work may leverage
RCU to enable lockless operation.
Inspired-by: Maíra Canal <mcanal@igalia.com>
Inspired-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250423-rust-xarray-bindings-v19-2-83cdcf11c114@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow implementors to specify the foreign pointer type; this exposes
information about the pointed-to type such as its alignment.
This requires the trait to be `unsafe` since it is now possible for
implementors to break soundness by returning a misaligned pointer.
Encoding the pointer type in the trait (and avoiding pointer casts)
allows the compiler to check that implementors return the correct
pointer type. This is preferable to directly encoding the alignment in
the trait using a constant as the compiler would be unable to check it.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250423-rust-xarray-bindings-v19-1-83cdcf11c114@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
When `CONFIG_AUXILIARY_BUS` is disabled, `parent()` is still dead code:
error: method `parent` is never used
--> rust/kernel/device.rs:71:19
|
64 | impl<Ctx: DeviceContext> Device<Ctx> {
| ------------------------------------ method in this implementation
...
71 | pub(crate) fn parent(&self) -> Option<&Self> {
| ^^^^^^
|
= note: `-D dead-code` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(dead_code)]`
Thus reintroduce the `expect`, but now as a conditional one. Do so as
`dead_code` since that is narrower.
An `allow` would also be possible, but Danilo wants to catch new users
in the future [1].
Link: https://lore.kernel.org/rust-for-linux/aBE8qQrpXOfru_K3@pollux/ [1]
Fixes: ce735e73dd ("rust: auxiliary: add auxiliary device / driver abstractions")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250429210629.513521-1-ojeda@kernel.org
[ Adjust commit subject to "rust: device: conditionally expect
`dead_code` for `parent()`". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Introduce a type representing a specific point in time. We could use
the Ktime type but C's ktime_t is used for both timestamp and
timedelta. To avoid confusion, introduce a new Instant type for
timestamp.
Rename Ktime to Instant and modify their methods for timestamp.
Implement the subtraction operator for Instant:
Delta = Instant A - Instant B
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250423192857.199712-5-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Introduce a type representing a span of time. Define our own type
because `core::time::Duration` is large and could panic during
creation.
time::Ktime could be also used for time duration but timestamp and
timedelta are different so better to use a new type.
i64 is used instead of u64 to represent a span of time; some C drivers
uses negative Deltas and i64 is more compatible with Ktime using i64
too (e.g., ktime_[us|ms]_delta() APIs return i64 so we create Delta
object without type conversion.
i64 is used instead of bindings::ktime_t because when the ktime_t
type is used as timestamp, it represents values from 0 to
KTIME_MAX, which is different from Delta.
as_millis() method isn't used in this patchset. It's planned to be
used in Binder driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250423192857.199712-4-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add PartialEq/Eq/PartialOrd/Ord trait to Ktime so two Ktime instances
can be compared to determine whether a timeout is met or not.
Use the derive implements; we directly touch C's ktime_t rather than
using the C's accessors because it is more efficient and we already do
in the existing code (Ktime::sub).
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250423192857.199712-3-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add Ktime temporarily until hrtimer is refactored to use Instant and
Delta types.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250423192857.199712-2-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
DRM GEM is the DRM memory management subsystem used by most modern
drivers; add a Rust abstraction for DRM GEM.
This includes the BaseObject trait, which contains operations shared by
all GEM object classes.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-8-dakr@kernel.org
[ Rework of GEM object abstractions
* switch to the Opaque<T> type
* fix (mutable) references to struct drm_gem_object (which in this
context is UB)
* drop all custom reference types in favor of AlwaysRefCounted
* bunch of minor changes and simplifications (e.g. IntoGEMObject
trait)
* write and fix safety and invariant comments
* remove necessity for and convert 'as' casts
* original source archive: https://archive.is/dD5SL
- Danilo ]
[ Fix missing CONFIG_DRM guards in rust/helpers/drm.c. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Here are some small driver core fixes to resolve a number of reported
problems. Included in here are:
- driver core sync fix revert to resolve a much reported problem,
hopefully this is finally resolved
- MAINTAINERS file update, documenting that the driver-core tree is
now under a "shared" maintainership model, thanks to Rafael and
Danilo for offering to do this!
- auxbus documentation and MAINTAINERS file update
- MAINTAINERS file update for Rust PCI code
- firmware rust binding fixup
- software node link fix
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaAuR4g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynU0wCg2YmcO0R7M4+g5SPHEFN0jy2xcaAAn1rMLbAY
E4U8Wo13hNMRtzMeI814
=YKYd
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes to resolve a number of reported
problems. Included in here are:
- driver core sync fix revert to resolve a much reported problem,
hopefully this is finally resolved
- MAINTAINERS file update, documenting that the driver-core tree is
now under a "shared" maintainership model, thanks to Rafael and
Danilo for offering to do this!
- auxbus documentation and MAINTAINERS file update
- MAINTAINERS file update for Rust PCI code
- firmware rust binding fixup
- software node link fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
drivers/base/memory: Avoid overhead from for_each_present_section_nr()
software node: Prevent link creation failure from causing kobj reference count imbalance
device property: Add a note to the fwnode.h
drivers/base: Add myself as auxiliary bus reviewer
drivers/base: Extend documentation with preferred way to use auxbus
driver core: fix potential NULL pointer dereference in dev_uevent()
driver core: introduce device_set_driver() helper
Revert "drivers: core: synchronize really_probe() and dev_uevent()"
MAINTAINERS: update the location of the driver-core git tree
rust: firmware: Use `ffi::c_char` type in `FwFunc`
MAINTAINERS: pci: add entry for Rust PCI code
A DRM File is the DRM counterpart to a kernel file structure,
representing an open DRM file descriptor.
Add a Rust abstraction to allow drivers to implement their own File types
that implement the DriverFile trait.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-7-dakr@kernel.org
[ Rework of drm::File
* switch to the Opaque<T> type
* fix (mutable) references to struct drm_file (which in this context
is UB)
* restructure and rename functions to align with common kernel
schemes
* write and fix safety and invariant comments
* remove necessity for and convert 'as' casts
* original source archive: https://archive.is/GH8oy
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the DRM driver `Registration`.
The `Registration` structure is responsible to register and unregister a
DRM driver. It makes use of the `Devres` container in order to allow the
`Registration` to be owned by devres, such that it is automatically
dropped (and the DRM driver unregistered) once the parent device is
unbound.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-6-dakr@kernel.org
[ Rework of drm::Registration
* move VTABLE to drm::Device to prevent use-after-free bugs; VTABLE
needs to be bound to the lifetime of drm::Device, not the
drm::Registration
* combine new() and register() to get rid of the registered boolean
* remove file_operations
* move struct drm_device creation to drm::Device
* introduce Devres
* original source archive: https://archive.is/Pl9ys
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the abstraction for a `struct drm_device`.
A `drm::Device` creates a static const `struct drm_driver` filled with
the data from the `drm::Driver` trait implementation of the actual
driver creating the `drm::Device`.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-5-dakr@kernel.org
[ Rewrite of drm::Device
* full rewrite of the drm::Device abstraction using the subclassing
pattern
* original source archive: http://archive.today/5NxBo
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the DRM driver abstractions.
The `Driver` trait provides the interface to the actual driver to fill
in the driver specific data, such as the `DriverInfo`, driver features
and IOCTLs.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-4-dakr@kernel.org
[ MISC changes
* remove unnecessary DRM features; make remaining ones crate private
* add #[expect(unused)] to avoid warnings
* add sealed trait
* remove shmem::Object references
* original source archive: https://archive.is/Pl9ys
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
DRM drivers need to be able to declare which driver-specific ioctls they
support. Add an abstraction implementing the required types and a helper
macro to generate the ioctl definition inside the DRM driver.
Note that this macro is not usable until further bits of the abstraction
are in place (but it will not fail to compile on its own, if not called).
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-3-dakr@kernel.org
[ MISC fixes
* wrap raw_data in Opaque to avoid UB when creating a reference
* fix IOCTL sample declaration
* fix safety comment of IOCTL argument
* original source archive: https://archive.is/LqHDQ
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Rename `set_len` to `inc_len` and simplify its safety contract.
Note that the usage in `CString::try_from_fmt` remains correct as the
receiver is known to have `len == 0`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250416-vec-set-len-v4-4-112b222604cd@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Use `checked_sub` to satisfy the safety requirements of `dec_len` and
replace nearly the whole body of `truncate` with a call to `dec_len`.
Reviewed-by: Andrew Ballance <andrewjballance@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250416-vec-set-len-v4-3-112b222604cd@gmail.com
[ Remove #[expect(unused)] from dec_len(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add `Vec::dec_len` that reduces the length of the receiver. This method
is intended to be used from methods that remove elements from `Vec` such
as `truncate`, `pop`, `remove`, and others. This method is intentionally
not `pub`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250416-vec-set-len-v4-2-112b222604cd@gmail.com
[ Add #[expect(unused)] to dec_len(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Document the invariant that the vector's length is always less than or
equal to its capacity. This is already implied by these other
invariants:
- `self.len` always represents the exact number of elements stored in
the vector.
- `self.layout` represents the absolute number of elements that can be
stored within the vector without re-allocation.
but it doesn't hurt to spell it out. Note that the language references
`self.capacity` rather than `self.layout.len` as the latter is zero for
a vector of ZSTs.
Update a safety comment touched by this patch to correctly reference
`realloc` rather than `alloc` and replace "leaves" with "leave" to
improve grammar.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250416-vec-set-len-v4-1-112b222604cd@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This enables the creation of trait objects backed by a Box, similarly to
what can be done with the standard library.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250412-box_trait_objs-v3-1-f67ced62d520@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Revocable::try_access() returns a guard through which the wrapped object
can be accessed. Code that can sleep is not allowed while the guard is
held; thus, it is common for the caller to explicitly drop it before
running sleepable code, e.g:
let b = bar.try_access()?;
let reg = b.readl(...);
// Don't forget this or things could go wrong!
drop(b);
something_that_might_sleep();
let b = bar.try_access()?;
let reg2 = b.readl(...);
This is arguably error-prone. try_access_with() provides an arguably
safer alternative, by taking a closure that is run while the guard is
held, and by dropping the guard automatically after the closure
completes. This way, code can be organized more clearly around the
critical sections and the risk of forgetting to release the guard when
needed is considerably reduced:
let reg = bar.try_access_with(|b| b.readl(...))?;
something_that_might_sleep();
let reg2 = bar.try_access_with(|b| b.readl(...))?;
The closure can return nothing, or any value including a Result which is
then wrapped inside the Option returned by try_access_with. Error
management is driver-specific, so users are encouraged to create their
own macros that map and flatten the returned values to something
appropriate for the code they are working on.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250411-try_with-v4-1-f470ac79e2e2@nvidia.com
[ Link `None`, `Some`, `Option` in doc-comment. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Rust 1.78 doesn't emit a `dead_code` error on the annotated element,
resulting in the `unfulfilled_lint_expectations` error. Rust 1.85 does
emit the `dead_code` error, so we still need an `allow`.
Link: 0e28cbb895
Link: https://lore.kernel.org/all/20250414195928.129040-4-benno.lossin@proton.me
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
The `quote` module only is available in the kernel and thus running
`cargo fmt` or `rustfmt internal/src/lib.rs` in the user-space
repository [1] results in:
error: couldn't read `~/pin-init/internal/src/../../../macros/quote.rs`: No such file or directory (os error 2)
--> ~/pin-init/internal/src/lib.rs:25:1
|
25 | mod quote;
| ^^^^^^^^^^
Error writing files: failed to resolve mod `quote`: ~/pin-init/internal/src/../../../macros/quote.rs does not exist
Thus mark it with `rustfmt::skip` when compiling without kernel support.
Link: https://github.com/Rust-for-Linux/pin-init [1]
Link: a6caf1945e
Link: https://lore.kernel.org/all/20250414195928.129040-2-benno.lossin@proton.me
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
The upstream version of the `README.md` differs by this change, so
synchronize it.
The reason that this wasn't in the original sync patch is that this was
a late change that I didn't port back to the kernel repo, since it was
generated by `cargo rdme`.
Link: https://lore.kernel.org/all/20250416225002.25253-1-benno.lossin@proton.me
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Implement the `auxiliary::Registration` type, which provides an API to
create and register new auxiliary devices in the system.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250414131934.28418-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the basic auxiliary abstractions required to implement a
driver matching an auxiliary device.
The design and implementation is analogous to PCI and platform and is
based on the generic device / driver abstractions.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250414131934.28418-4-dakr@kernel.org
[ Fix typos, `let _ =` => `drop()`, use `kernel::ffi`. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Analogous to `Opaque::uninit` add `Opaque::zeroed`, which sets the
corresponding memory to zero. In contrast to `Opaque::uninit`, the
corresponding value, depending on its type, may be initialized.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250414131934.28418-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement TryFrom<&device::Device> for &Device.
This allows us to get a &platform::Device from a generic &Device in a safe
way; the conversion fails if the device' bus type does not match with
the platform bus type.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250321214826.140946-4-dakr@kernel.org
[ Support device context types, use dev_is_platform() helper. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement TryFrom<&device::Device> for &Device.
This allows us to get a &pci::Device from a generic &Device in a safe
way; the conversion fails if the device' bus type does not match with
the PCI bus type.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250321214826.140946-3-dakr@kernel.org
[ Support device context types, use dev_is_pci() helper. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Require the Bound device context to be able to create new
dma::CoherentAllocation instances.
DMA memory allocations are only valid to be created for bound devices.
Link: https://lore.kernel.org/r/20250413173758.12068-10-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Require the Bound device context to be able to a new Devres container.
This ensures that we can't register devres callbacks for unbound
devices.
Link: https://lore.kernel.org/r/20250413173758.12068-9-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Require the Bound device context to be able to call iomap_region() and
iomap_region_sized(). Creating I/O mapping requires the device to be
bound.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250413173758.12068-8-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The Bound device context indicates that a device is bound to a driver.
It must be used for APIs that require the device to be bound, such as
Devres or dma::CoherentAllocation.
Implement Bound and add the corresponding Deref hierarchy, as well as the
corresponding ARef conversion for this device context.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250413173758.12068-7-dakr@kernel.org
[ Add missing `::` prefix in macros. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Since device::Device has a generic over its context, preserve this
device context in AsRef.
For instance, when calling pci::Device<Core> the new AsRef implementation
returns device::Device<Core>.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250413173758.12068-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Since device::Device has a generic over its context, preserve this
device context in AsRef.
For instance, when calling platform::Device<Core> the new AsRef
implementation returns device::Device<Core>.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250413173758.12068-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Analogous to bus specific device, implement the DeviceContext generic
for generic devices.
This is used for APIs that work with generic devices (such as Devres) to
evaluate the device's context.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250413173758.12068-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement a macro to implement all From conversions of a certain device
to ARef<Device>.
This avoids unnecessary boiler plate code for every device
implementation.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250413173758.12068-3-dakr@kernel.org
[ Add missing `::` prefix in macros. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The Deref hierarchy for device context generics is the same for every
(bus specific) device.
Implement those with a generic macro to avoid duplicated boiler plate
code and ensure the correct Deref hierarchy for every device
implementation.
Co-developed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: https://lore.kernel.org/r/20250413173758.12068-2-dakr@kernel.org
[ Add missing `::` prefix in macros. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add dma_alloc_attrs() and dma_free_attrs() helpers to fix a build
error when CONFIG_HAS_DMA is not enabled.
Note that when CONFIG_HAS_DMA is enabled, dma_alloc_attrs() and
dma_free_attrs() are included in both bindings_generated.rs and
bindings_helpers_generated.rs. The former takes precedence so behavior
remains unchanged in that case.
This fixes the following build error on UML:
error[E0425]: cannot find function `dma_alloc_attrs` in crate `bindings`
--> rust/kernel/dma.rs:171:23
|
171 | bindings::dma_alloc_attrs(
| ^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_alloc_pages`
|
::: rust/bindings/bindings_generated.rs:44568:5
|
44568 | / pub fn dma_alloc_pages(
44569 | | dev: *mut device,
44570 | | size: usize,
44571 | | dma_handle: *mut dma_addr_t,
44572 | | dir: dma_data_direction,
44573 | | gfp: gfp_t,
44574 | | ) -> *mut page;
| |___________________- similarly named function `dma_alloc_pages` defined here
error[E0425]: cannot find function `dma_free_attrs` in crate `bindings`
--> rust/kernel/dma.rs:293:23
|
293 | bindings::dma_free_attrs(
| ^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_free_pages`
|
::: rust/bindings/bindings_generated.rs:44577:5
|
44577 | / pub fn dma_free_pages(
44578 | | dev: *mut device,
44579 | | size: usize,
44580 | | page: *mut page,
44581 | | dma_handle: dma_addr_t,
44582 | | dir: dma_data_direction,
44583 | | );
| |______- similarly named function `dma_free_pages` defined here
Fixes: ad2907b4e3 ("rust: add dma coherent allocator abstraction")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250412000507.157000-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Remove the `volatile` qualifier used with __iomem in helper functions
in io.c. These helper functions are just wrappers around the
corresponding accessors so they are unnecessary.
This fixes the following UML build error with CONFIG_RUST enabled:
In file included from rust/helpers/helpers.c:19:
rust/helpers/io.c:12:10: error: passing 'volatile void *' to parameter of type 'void *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
12 | iounmap(addr);
| ^~~~
arch/um/include/asm/io.h:19:42: note: passing argument to parameter 'addr' here
19 | static inline void iounmap(void __iomem *addr)
| ^
1 error generated.
[ Arnd explains [1] that removing the qualifier is the way forward
(thanks!):
Rihgt, I tried this last week when it came up first, removing the
'volatile' annotations in the asm-generic/io.h header and then
all the ones that caused build regressions on arm/arm64/x86
randconfig and allmodconfig builds. This patch is a little
longer than my original version as I did run into a few
regressions later.
As far as I can tell, none of these volatile annotations have
any actual effect, and most of them date back to ancient kernels
where this may have been required.
Leaving it out of the rust interface is clearly the right way,
and it shouldn't be too hard to upstream the changes below
when we need to, but I also don't see any priority to send these.
If anyone wants to help out, I can send them the whole patch.
I created an issue [2] in case someone wants to help. - Miguel ]
Fixes: ce30d94e68 ("rust: add `io::{Io, IoRaw}` base types")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/0c844b70-19c7-4b14-ba29-fc99ae0d69f0@app.fastmail.com/ [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1156 [2]
Link: https://lore.kernel.org/r/20250412005341.157150-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `FwFunc` struct contains an function with a char pointer argument,
for which a `*const u8` pointer was used. This is not really the
"proper" type for this, so use a `*const kernel::ffi::c_char` pointer
instead.
This has no real functionality changes, since now `kernel::ffi::c_char`
(which bindgen uses for `char`) is now a type alias to `u8` anyways,
but before commit 1bae8729e5 ("rust: map `long` to `isize` and `char`
to `u8`") the concrete type of `kernel::ffi::c_char` depended on the
architecture (However all supported architectures at the time mapped to
`i8`).
This caused problems on the v6.13 tag when building for 32 bit arm (with
my patches), since back then `*const i8` was used in the function
argument and the function that bindgen generated used
`*const core::ffi::c_char` which Rust mapped to `*const u8` on 32 bit
arm. The stable v6.13.y branch does not have this issue since commit
1bae8729e5 ("rust: map `long` to `isize` and `char` to `u8`") was
backported.
This caused the following build error:
```
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:20:4
|
20 | Self(bindings::request_firmware)
| ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item
| |
| arguments to this function are incorrect
|
= note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _`
found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {request_firmware}`
note: tuple struct defined here
--> rust/kernel/firmware.rs:14:8
|
14 | struct FwFunc(
| ^^^^^^
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:24:14
|
24 | Self(bindings::firmware_request_nowarn)
| ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item
| |
| arguments to this function are incorrect
|
= note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _`
found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {firmware_request_nowarn}`
note: tuple struct defined here
--> rust/kernel/firmware.rs:14:8
|
14 | struct FwFunc(
| ^^^^^^
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:64:45
|
64 | let ret = unsafe { func.0(pfw as _, name.as_char_ptr(), dev.as_raw()) };
| ------ ^^^^^^^^^^^^^^^^^^ expected `*const i8`, found `*const u8`
| |
| arguments to this function are incorrect
|
= note: expected raw pointer `*const i8`
found raw pointer `*const u8`
error: aborting due to 3 previous errors
```
Fixes: de6582833d ("rust: add firmware abstractions")
Cc: stable@vger.kernel.org
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250413-rust_arm_fix_fw_abstaction-v3-1-8dd7c0bbcd47@gmail.com
[ Add firmware prefix to commit subject. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
With CONFIG_PREFIX_SYMBOLS, objtool adds __pfx prefix symbols
to claim the compiler emitted call padding bytes. When
CONFIG_X86_KERNEL_IBT is not selected, the symbols are added to
individual object files and for Rust objects, they end up being
exported, resulting in warnings with CONFIG_GENDWARFKSYMS as the
symbols have no debugging information:
warning: gendwarfksyms: symbol_print_versions: no information for symbol __pfx_rust_helper_put_task_struct
warning: gendwarfksyms: symbol_print_versions: no information for symbol __pfx_rust_helper_task_euid
warning: gendwarfksyms: symbol_print_versions: no information for symbol __pfx_rust_helper_readq_relaxed
...
Filter out the __pfx prefix from exported symbols similarly to
the existing __cfi and __odr_asan prefixes.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org
Fixes: ac61506bf2 ("rust: Use gendwarfksyms + extended modversions for CONFIG_MODVERSIONS")
Link: https://lore.kernel.org/r/20250318231815.917621-2-samitolvanen@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
"Normal" comments in Rust (`//`) are also formatted in Markdown, like
the documentation (`///` and `//!`), see
Documentation/rust/coding-guidelines.rst
Thus use Markdown autolinks for a couple links that were missing it.
It also helps to get proper linking in some software like kitty [1].
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/pin-init/pull/32#discussion_r2023103712 [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: dd230d61bf
Fixes: 84837cf6fa ("rust: pin-init: change examples to the user-space version")
Cc: stable@vger.kernel.org
[ Change case in title. Reworded commit message. - Benno ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250407201755.649153-3-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Similar to what was done for `Zeroable<NonNull<T>>` in commit
df27cef153 ("rust: init: fix `Zeroable` implementation for
`Option<NonNull<T>>` and `Option<KBox<T>>`"), the latest Rust
documentation [1] says it guarantees that `transmute::<_,
Option<T>>([0u8; size_of::<T>()])` is sound and produces
`Option::<T>::None` only in some cases. In particular, it says:
`Box<U>` (specifically, only `Box<U, Global>`) when `U: Sized`
Thus restrict the `impl` to `Sized`, and use similar wording as in that
commit too.
Link: https://doc.rust-lang.org/stable/std/option/index.html#representation [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: a6007cf555
Fixes: 9b2299af3b ("rust: pin-init: add `std` and `alloc` support from the user-space version")
Cc: stable@vger.kernel.org
[ Adjust mentioned commit to the one from the kernel. - Benno ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250407201755.649153-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use `spare_capacity_mut` in the implementation of `push` to reduce the
use of `unsafe`. Both methods were added in commit 2aac4cd7da ("rust:
alloc: implement kernel `Vec` type").
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250318-vec-push-use-spare-v3-1-68741671d1af@gmail.com
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the equivalent of the rust std's Vec::resize on the kernel's
Vec type.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250316111644.154602-3-andrewjballance@gmail.com
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
[ Use checked_sub(), as suggested by Tamir. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the equivalent to the std's Vec::truncate on the kernel's Vec
type.
Link: https://lore.kernel.org/r/20250316111644.154602-2-andrewjballance@gmail.com
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
[ Rewrote safety comment of set_len(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
-----BEGIN PGP SIGNATURE-----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=GiQ6
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
-----BEGIN PGP SIGNATURE-----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=XL1+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM and clkdev updates from Russell King:
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9445/1: clkdev: Mark some functions with __printf() attribute
ARM: 9444/1: add KEEP() keyword to ARM_VECTORS
ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE
ARM: 9442/1: smp: Fix IPI alignment in /proc/interrupts
ARM: 9441/1: rust: Enable Rust support for ARMv7
ARM: 9439/1: arm32: simplify ARM_MMU_KEEP usage
1, Add jump table support for objtool;
2, Always select HAVE_VIRT_CPU_ACCOUNTING_GEN;
3, Enable UBSAN (Undefined Behavior Sanitizer);
4, Increase MAX_IO_PICS up to 8;
5, Increase ARCH_DMA_MINALIGN up to 16;
6, Fix and improve BPF JIT;
7, Fix and improve vDSO implementation;
8, Update the default config file;
9, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=9xTj
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
- Enable UBSAN (Undefined Behavior Sanitizer)
- Increase MAX_IO_PICS up to 8
- Increase ARCH_DMA_MINALIGN up to 16
- Fix and improve BPF JIT
- Fix and improve vDSO implementation
- Update the default config file
- Some bug fixes and other small changes
* tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: vDSO: Make use of the t8 register for vgetrandom-chacha
LoongArch: vDSO: Remove --hash-style=sysv
LoongArch: BPF: Don't override subprog's return value
LoongArch: BPF: Use move_addr() for BPF_PSEUDO_FUNC
LoongArch: BPF: Fix off-by-one error in build_prologue()
LoongArch: Rework the arch_kgdb_breakpoint() implementation
LoongArch: Fix device node refcount leak in fdt_cpu_clk_init()
LoongArch: Increase ARCH_DMA_MINALIGN up to 16
LoongArch: Increase MAX_IO_PICS up to 8
LoongArch: Fix help text of CMDLINE_EXTEND in Kconfig
LoongArch: Enable UBSAN (Undefined Behavior Sanitizer)
LoongArch: Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
rust: Fix enabling Rust and building with GCC for LoongArch
Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform bus
interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mNdQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylktACfYJix41jCCDbiFjnu7Hz4OIdcrUsAnRyF164M
1n5MhEhsEmvQj7WBwQLE
=AmmW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
Toolchain and infrastructure:
- Extract the 'pin-init' API from the 'kernel' crate and make it into
a standalone crate.
In order to do this, the contents are rearranged so that they can
easily be kept in sync with the version maintained out-of-tree that
other projects have started to use too (or plan to, like QEMU).
This will reduce the maintenance burden for Benno, who will now have
his own sub-tree, and will simplify future expected changes like the
move to use 'syn' to simplify the implementation.
- Add '#[test]'-like support based on KUnit.
We already had doctests support based on KUnit, which takes the
examples in our Rust documentation and runs them under KUnit.
Now, we are adding the beginning of the support for "normal" tests,
similar to those the '#[test]' tests in userspace Rust. For instance:
#[kunit_tests(my_suite)]
mod tests {
#[test]
fn my_test() {
assert_eq!(1 + 1, 2);
}
}
Unlike with doctests, the 'assert*!'s do not map to the KUnit
assertion APIs yet.
- Check Rust signatures at compile time for functions called from C by
name.
In particular, introduce a new '#[export]' macro that can be placed
in the Rust function definition. It will ensure that the function
declaration on the C side matches the signature on the Rust function:
#[export]
pub unsafe extern "C" fn my_function(a: u8, b: i32) -> usize {
// ...
}
The macro essentially forces the compiler to compare the types of
the actual Rust function and the 'bindgen'-processed C signature.
These cases are rare so far. In the future, we may consider
introducing another tool, 'cbindgen', to generate C headers
automatically. Even then, having these functions explicitly marked
may be a good idea anyway.
- Enable the 'raw_ref_op' Rust feature: it is already stable, and
allows us to use the new '&raw' syntax, avoiding a couple macros.
After everyone has migrated, we will disallow the macros.
- Pass the correct target to 'bindgen' on Usermode Linux.
- Fix 'rusttest' build in macOS.
'kernel' crate:
- New 'hrtimer' module: add support for setting up intrusive timers
without allocating when starting the timer. Add support for
'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and 'Pin<&mut _>' as pointer types
for use with timer callbacks. Add support for setting clock source
and timer mode.
- New 'dma' module: add a simple DMA coherent allocator abstraction and
a test sample driver.
- 'list' module: make the linked list 'Cursor' point between elements,
rather than at an element, which is more convenient to us and allows
for cursors to empty lists; and document it with examples of how to
perform common operations with the provided methods.
- 'str' module: implement a few traits for 'BStr' as well as the
'strip_prefix()' method.
- 'sync' module: add 'Arc::as_ptr'.
- 'alloc' module: add 'Box::into_pin'.
- 'error' module: extend the 'Result' documentation, including a few
examples on different ways of handling errors, a warning about using
methods that may panic, and links to external documentation.
'macros' crate:
- 'module' macro: add the 'authors' key to support multiple authors.
The original key will be kept until everyone has migrated.
Documentation:
- Add error handling sections.
MAINTAINERS:
- Add Danilo Krummrich as reviewer of the Rust "subsystem".
- Add 'RUST [PIN-INIT]' entry with Benno Lossin as maintainer. It has
its own sub-tree.
- Add sub-tree for 'RUST [ALLOC]'.
- Add 'DMA MAPPING HELPERS DEVICE DRIVER API [RUST]' entry with Abdiel
Janulgue as primary maintainer. It will go through the sub-tree of
the 'RUST [ALLOC]' entry.
- Add 'HIGH-RESOLUTION TIMERS [RUST]' entry with Andreas Hindborg as
maintainer. It has its own sub-tree.
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=PCxf
-----END PGP SIGNATURE-----
Merge tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Extract the 'pin-init' API from the 'kernel' crate and make it into
a standalone crate.
In order to do this, the contents are rearranged so that they can
easily be kept in sync with the version maintained out-of-tree that
other projects have started to use too (or plan to, like QEMU).
This will reduce the maintenance burden for Benno, who will now
have his own sub-tree, and will simplify future expected changes
like the move to use 'syn' to simplify the implementation.
- Add '#[test]'-like support based on KUnit.
We already had doctests support based on KUnit, which takes the
examples in our Rust documentation and runs them under KUnit.
Now, we are adding the beginning of the support for "normal" tests,
similar to those the '#[test]' tests in userspace Rust. For
instance:
#[kunit_tests(my_suite)]
mod tests {
#[test]
fn my_test() {
assert_eq!(1 + 1, 2);
}
}
Unlike with doctests, the 'assert*!'s do not map to the KUnit
assertion APIs yet.
- Check Rust signatures at compile time for functions called from C
by name.
In particular, introduce a new '#[export]' macro that can be placed
in the Rust function definition. It will ensure that the function
declaration on the C side matches the signature on the Rust
function:
#[export]
pub unsafe extern "C" fn my_function(a: u8, b: i32) -> usize {
// ...
}
The macro essentially forces the compiler to compare the types of
the actual Rust function and the 'bindgen'-processed C signature.
These cases are rare so far. In the future, we may consider
introducing another tool, 'cbindgen', to generate C headers
automatically. Even then, having these functions explicitly marked
may be a good idea anyway.
- Enable the 'raw_ref_op' Rust feature: it is already stable, and
allows us to use the new '&raw' syntax, avoiding a couple macros.
After everyone has migrated, we will disallow the macros.
- Pass the correct target to 'bindgen' on Usermode Linux.
- Fix 'rusttest' build in macOS.
'kernel' crate:
- New 'hrtimer' module: add support for setting up intrusive timers
without allocating when starting the timer. Add support for
'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and 'Pin<&mut _>' as pointer
types for use with timer callbacks. Add support for setting clock
source and timer mode.
- New 'dma' module: add a simple DMA coherent allocator abstraction
and a test sample driver.
- 'list' module: make the linked list 'Cursor' point between
elements, rather than at an element, which is more convenient to us
and allows for cursors to empty lists; and document it with
examples of how to perform common operations with the provided
methods.
- 'str' module: implement a few traits for 'BStr' as well as the
'strip_prefix()' method.
- 'sync' module: add 'Arc::as_ptr'.
- 'alloc' module: add 'Box::into_pin'.
- 'error' module: extend the 'Result' documentation, including a few
examples on different ways of handling errors, a warning about
using methods that may panic, and links to external documentation.
'macros' crate:
- 'module' macro: add the 'authors' key to support multiple authors.
The original key will be kept until everyone has migrated.
Documentation:
- Add error handling sections.
MAINTAINERS:
- Add Danilo Krummrich as reviewer of the Rust "subsystem".
- Add 'RUST [PIN-INIT]' entry with Benno Lossin as maintainer. It has
its own sub-tree.
- Add sub-tree for 'RUST [ALLOC]'.
- Add 'DMA MAPPING HELPERS DEVICE DRIVER API [RUST]' entry with
Abdiel Janulgue as primary maintainer. It will go through the
sub-tree of the 'RUST [ALLOC]' entry.
- Add 'HIGH-RESOLUTION TIMERS [RUST]' entry with Andreas Hindborg as
maintainer. It has its own sub-tree.
And a few other cleanups and improvements"
* tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (71 commits)
rust: dma: add `Send` implementation for `CoherentAllocation`
rust: macros: fix `make rusttest` build on macOS
rust: block: refactor to use `&raw mut`
rust: enable `raw_ref_op` feature
rust: uaccess: name the correct function
rust: rbtree: fix comments referring to Box instead of KBox
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: str: implement `strip_prefix` for `BStr`
rust: str: implement `AsRef<BStr>` for `[u8]` and `BStr`
rust: str: implement `Index` for `BStr`
rust: str: implement `PartialEq` for `BStr`
...
This patch fixes a build issue on LoongArch when Rust is enabled and
compiled with GCC by explicitly setting the bindgen target and skipping
C flags that Clang doesn't support.
Cc: stable@vger.kernel.org
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
This commit allows building ARMv7 kernels with Rust support.
The rust core library expects some __eabi_... functions
that are not implemented in the kernel.
Those functions are some float operations and __aeabi_uldivmod.
For now those are implemented with define_panicking_intrinsics!.
This is based on the code by Sven Van Asbroeck from the original
rust branch and inspired by the AArch version by Jamie Cunliffe.
I have tested the rust samples and a custom simple MMIO module
on hardware (De1SoC FPGA + Arm A9 CPU).
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-----BEGIN PGP SIGNATURE-----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=oxfV
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
Introduce Rust support for the `hrtimer` subsystem:
- Add a way to use the `hrtimer` subsystem from Rust. Rust code can now set up
intrusive timers without allocating when starting the timer.
- Add support for `Pin<Box<_>>`, `Arc<_>`, `Pin<&_>` and `Pin<&mut _>` as
pointer types for use with timer callbacks.
- Add support for setting clock source and timer mode.
`kernel` crate:
- Add `Arc::as_ptr` for converting an `Arc` to a raw pointer. This is a
dependency for the `hrtimer` API.
- Add `Box::into_pin` for converting a `Box<_>` into a `Pin<Box<_>>` to align
with Rust `alloc`. This is a dependency for the `hrtimer` API.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEsH5R1a/fCoV1sAS4bgaPnkoY3cFAmfempwACgkQ4bgaPnko
Y3duBg/+LVcEOEQvmaVi6+5TqOSsytMG2Cf+61n7HHqFhY2ptoY8Br5yMhtY8qxy
fEPr8F/pGvW8nMN8H9smlscqwp8fAs/DKj2nnX4ZPU3xNj1BwAk52SmUbedBNY37
JaRxFqheAM3AXVrpHjP2flUyXb3c2G7PR4CaZApa0pzMuHCKSI9iZZNACh/c/ViS
9pcf1FKLGLqYwFDcLN+d2CtPtJq6ghOjRcaJTGc3G1Wiosw3VYmQK/vyGCwROCQX
h0OwwT+1wokp9cIhBW4X1WzNdp9df71lW32qpZ4weYeV8y9oPJNvr1SqDblpGLm0
T+qE2RSRKNsXxiJS4viLUsqVUgzCtu7bB402MxcmoGInxt74AEmY1Vx80QVF4SFq
KvfDlyk9al2dVc24GsDTAvQo/1KiDCEVWsxLIbyRQMuOZLuA5sGSN6FSGt/aW+Vb
ngYLnwTangvANWqaRdiTSa9tcGviaqA7V3EcpL27hsL2eMCilm6M3PuC2LnHLp46
Yf2G6fWUdVi8Sra1cHIArKOz1PVZ+KuMn3SHoKo1UwJPJ3J5VrYxSPIFRd38+2qg
sjaITJfYg6ZWeBfECfaOv6AHnjBi8AAskrRyUzrUu7bdGqXW6IxnAoGc195Q+wz/
0h0wK9Z2+UqbNT96jeOk+1FvXk4cL0wUYsZM4hviCi1+w4rP4kg=
=vNJu
-----END PGP SIGNATURE-----
Merge tag 'rust-hrtimer-for-v6.15-v3' of https://github.com/Rust-for-Linux/linux into rust-next
Pull rust-hrtimer updates from Andreas Hindborg:
"Introduce Rust support for the 'hrtimer' subsystem:
- Add a way to use the 'hrtimer' subsystem from Rust. Rust code can
now set up intrusive timers without allocating when starting the
timer.
- Add support for 'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and
'Pin<&mut _>' as pointer types for use with timer callbacks.
- Add support for setting clock source and timer mode.
'kernel' crate:
- Add 'Arc::as_ptr' for converting an 'Arc' to a raw pointer. This is
a dependency for the 'hrtimer' API.
- Add 'Box::into_pin' for converting a 'Box<_>' into a 'Pin<Box<_>>'
to align with Rust 'alloc'. This is a dependency for the 'hrtimer'
API."
* tag 'rust-hrtimer-for-v6.15-v3' of https://github.com/Rust-for-Linux/linux:
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: hrtimer: implement `HrTimerPointer` for `Arc`
rust: sync: add `Arc::as_ptr`
rust: hrtimer: introduce hrtimer support
Just one commit to expose system BH workqueues to rust.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ9xJ1A4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfiVAP4+zWr3XRWe53iAhBQxBKGDNcfKZAZ/xywRmTvh
sd9CywEAtTHy4u+9C1NzDW0XToUfKMhsAJuYFO6S/OpYEn2R6QQ=
=z9C+
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
"Just one commit to expose system BH workqueues to rust"
* tag 'wq-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rust: workqueue: define built-in bh queues
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90sSwAKCRCRxhvAZXjc
oqodAP9rJCUOpfqV0Sh25TiyTbG/+62ZquZfUkqivnnpoz/XyAEApPPENf2qzcbz
aTHx9U7w+lDG+W/CgmTGkOnYvly9Qg4=
=Xja1
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rust updates from Christian Brauner:
"This contains minor fixes and improvements to rust file bindings:
- Optimize rust symbol generation for FileDescriptorReservation
- Optimize rust symbol generation for SeqFile"
* tag 'vfs-6.15-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: optimize rust symbol generation for SeqFile
rust: file: optimize rust symbol generation for FileDescriptorReservation
Stephen found a future build failure in linux-next [1]:
error[E0277]: `*mut MyStruct` cannot be sent between threads safely
--> samples/rust/rust_dma.rs:47:22
|
47 | impl pci::Driver for DmaSampleDriver {
| ^^^^^^^^^^^^^^^ `*mut MyStruct` cannot be sent between threads safely
It is caused by the interaction between commit 935e1d90bf ("rust: pci:
require Send for Driver trait implementers") from the driver-core tree,
which fixes a missing concurrency requirement, and commit 9901addae6
("samples: rust: add Rust dma test sample driver") which adds a sample
that does not satisfy that requirement.
Add a `Send` implementation to `CoherentAllocation`, which allows the
sample (and other future users) to satisfy it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250324215702.1515ba92@canb.auug.org.au/ [1]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250324174048.1075597-1-ojeda@kernel.org
[ Added number to Closes. Fix typo spotted by Boqun. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Do not emit `#[link_section = ".modinfo"]` on macOS (i.e. when building
userspace tests); .modinfo is not a legal section specifier in mach-o.
Before this change tests failed to compile:
---- ../rust/macros/lib.rs - module (line 66) stdout ----
rustc-LLVM ERROR: Global variable '_ZN8rust_out13__module_init13__module_init27__MY_DEVICE_DRIVER_MODULE_017h141f80536770e0d4E' has an invalid section specifier '.modinfo': mach-o section specifier requires a segment and section separated by a comma.
Couldn't compile the test.
---- ../rust/macros/lib.rs - module (line 33) stdout ----
rustc-LLVM ERROR: Global variable '_ZN8rust_out13__module_init13__module_init20__MY_KERNEL_MODULE_017h5d79189564b41e07E' has an invalid section specifier '.modinfo': mach-o section specifier requires a segment and section separated by a comma.
Couldn't compile the test.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250210-macros-section-v2-1-3bb9ff44b969@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace all occurrences (one) of `addr_of_mut!(place)` with
`&raw mut place`.
This will allow us to reduce macro complexity, and improve consistency
with existing reference syntax as `&raw mut` is similar to `&mut` making
it fit more naturally with other existing code.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1148
Signed-off-by: Antonio Hickey <contact@antoniohickey.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250320020740.1631171-17-contact@antoniohickey.com
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Since Rust 1.82.0 the `raw_ref_op` feature is stable [1].
By enabling this feature we can use `&raw const place` and
`&raw mut place` instead of using `addr_of!(place)` and
`addr_of_mut!(place)` macros.
Allowing us to reduce macro complexity, and improve consistency
with existing reference syntax as `&raw const`, `&raw mut` are
similar to `&`, `&mut` making it fit more naturally with other
existing code.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1148
Link: https://blog.rust-lang.org/2024/10/17/Rust-1.82.0.html#native-syntax-for-creating-a-raw-pointer [1]
Signed-off-by: Antonio Hickey <contact@antoniohickey.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250320020740.1631171-2-contact@antoniohickey.com
[ Removed dashed line change as discussed. Added Link to the explanation
of the feature in the Rust 1.82.0 release blog post. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Correctly refer to `reserve` rather than `try_reserve` in a comment. This
comment has been incorrect since inception in commit 1b580e7b9b ("rust:
uaccess: add userspace pointers").
Fixes: 1b580e7b9b ("rust: uaccess: add userspace pointers")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/r/20250317-uaccess-typo-reserve-v1-1-bbfcb45121f3@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Several safety comments in the RBTree implementation still refer to
"Box::from_raw" and "Box::into_raw", but the code actually uses KBox.
These comments were not updated when the implementation transitioned
from using Box to KBox.
Fixes: 8373147ce4 ("rust: treewide: switch to our kernel `Box` type")
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250315-rbtree-comment-fixes-v1-1-51f72c420ff0@posteo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`rustdoc` only recognizes `--remap-path-prefix` starting with
Rust 1.81.0, which is later than on minimum, so we cannot pass it
unconditionally. Otherwise, we get:
error: Unrecognized option: 'remap-path-prefix'
Note that `rustc` (the compiler) does recognize the flag since a long
time ago (1.26.0).
Moreover, `rustdoc` since Rust 1.82.0 ICEs in out-of-tree builds when
using `--remap-path-prefix`. The issue has been reduced and reported
upstream [1].
Thus workaround both issues by simply skipping the flag when generating
the docs -- it is not critical there anyway.
The ICE does not reproduce under `--test`, but we still need to skip
the flag as well for `RUSTDOC TK` since it is not recognized.
Fixes: dbdffaf50f ("kbuild, rust: use -fremap-path-prefix to make paths relative")
Link: https://github.com/rust-lang/rust/issues/138520 [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Allow selecting a clock source for timers by passing a `ClockId`
variant to `HrTimer::new`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-12-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow selection of timer mode by passing a `HrTimerMode` variant to
`HrTimer::new`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-11-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow `Pin<Box<T>>` to be the target of a timer callback.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-10-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add an associated function to convert a `Box<T>` into a `Pin<Box<T>>`.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-9-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow pinned mutable references to structs that contain a `HrTimer` node to
be scheduled with the `hrtimer` subsystem.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-8-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow pinned references to structs that contain a `HrTimer` node to be
scheduled with the `hrtimer` subsystem.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-7-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add the trait `ScopedHrTimerPointer` to allow safe use of stack allocated
timers. Safety is achieved by pinning the stack in place while timers are
running.
Implement the trait for all types that implement `UnsafeHrTimerPointer`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-6-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Allow timer handlers to report that they want a timer to be restarted after
the timer handler has finished executing.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-4-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Implement `strip_prefix` for `BStr` by deferring to `slice::strip_prefix`
on the underlying `&[u8]`.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-4-ceeee85d9347@kernel.org
[ Pluralized section name. Hid `use`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `AsRef<BStr>` for `[u8]` and `BStr` so these can be used
interchangeably for operations on `BStr`.
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-3-ceeee85d9347@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `Index` implementation on `BStr` was lost when we switched `BStr` from
a type alias of `[u8]` to a newtype. Add back `Index` by implementing
`Index` for `BStr` when `Index` would be implemented for `[u8]`.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-2-ceeee85d9347@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `PartialEq` for `BStr` by comparing underlying byte slices.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-1-ceeee85d9347@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a simple dma coherent allocator rust abstraction. Based on
Andreas Hindborg's dma abstractions from the rnvme driver, which
was also based on earlier work by Wedson Almeida Filho.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250317185345.2608976-3-abdiel.janulgue@gmail.com
Nacked-by: Christoph Hellwig <hch@lst.de>
[ Removed period. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Trivial addition for missing EOVERFLOW error. This is used by a
subsequent patch that might require returning EOVERFLOW as a result
of `checked_mul`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250317185345.2608976-2-abdiel.janulgue@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The instance of Self, returned and created by Driver::probe() is
dropped in the bus' remove() callback.
Request implementers of the Driver trait to implement Send, since the
remove() callback is not guaranteed to run from the same thread as
probe().
Fixes: 683a63befc ("rust: platform: add basic platform device / driver abstractions")
Cc: stable <stable@kernel.org>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/lkml/Z9rDxOJ2V2bPjj5i@google.com/
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250319145350.69543-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The instance of Self, returned and created by Driver::probe() is
dropped in the bus' remove() callback.
Request implementers of the Driver trait to implement Send, since the
remove() callback is not guaranteed to run from the same thread as
probe().
Fixes: 1bd8b6b2c5 ("rust: pci: add basic PCI device / driver abstractions")
Cc: stable <stable@kernel.org>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/lkml/Z9rDxOJ2V2bPjj5i@google.com/
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250319145350.69543-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases, we need to call test-only code from outside the test
case, for example, to mock a function or a module.
In order to check whether we are in a test or not, we need to test if
`CONFIG_KUNIT` is set.
Unfortunately, we cannot rely only on this condition because:
- a test could be running in another thread,
- some distros compile KUnit in production kernels, so checking at runtime
that `current->kunit_test != NULL` is required.
Forturately, KUnit provides an optimised check in
`kunit_get_current_test()`, which checks CONFIG_KUNIT, a global static
key, and then the current thread's running KUnit test.
Add a safe wrapper function around this to know whether or not we are in
a KUnit test and examples showing how to mock a function and a module.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250307090103.918788-4-davidgow@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a new procedural macro (`#[kunit_tests(kunit_test_suit_name)]`) to
run KUnit tests using a user-space like syntax.
The macro, that should be used on modules, transforms every `#[test]`
in a `kunit_case!` and adds a `kunit_unsafe_test_suite!` registering
all of them.
The only difference with user-space tests is that instead of using
`#[cfg(test)]`, `#[kunit_tests(kunit_test_suit_name)]` is used.
Note that `#[cfg(CONFIG_KUNIT)]` is added so the test module is not
compiled when `CONFIG_KUNIT` is set to `n`.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250307090103.918788-3-davidgow@google.com
[ Removed spurious (in rendered form) newline in docs. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a couple of Rust const functions and macros to allow to develop
KUnit tests without relying on generated C code:
- The `kunit_unsafe_test_suite!` Rust macro is similar to the
`kunit_test_suite` C macro. It requires a NULL-terminated array of
test cases (see below).
- The `kunit_case` Rust function is similar to the `KUNIT_CASE` C macro.
It generates as case from the name and function.
- The `kunit_case_null` Rust function generates a NULL test case, which
is to be used as delimiter in `kunit_test_suite!`.
While these functions and macros can be used on their own, a future
patch will introduce another macro to create KUnit tests using a
user-space like syntax.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Co-developed-by: Matt Gilbride <mattgilbride@google.com>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250307090103.918788-2-davidgow@google.com
[ Applied Markdown in comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The kunitconfig file in a directory is used by kunit.py to enable all
necessary kernel configurations to run the tests in that subdirectory.
Add such a file for rust/.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250208-rust-kunit-v1-2-94a026be6d72@weissschuh.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Usermode Linux uses "um" as primary architecture name and the underlying
physical architecture is provided in "SUBARCH".
Resolve the target architecture flags through that underlying
architecture.
This is the same pattern as used by scripts/Makefile.clang from which
the bindgen flags are derived.
[ David says:
(...) this is enough to get Rust-for-Linux working with gcc under
64-bit UML on my system.
- Miguel ]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Gow <davidgow@googl.ecom>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://lore.kernel.org/r/20250208-rust-kunit-v1-1-94a026be6d72@weissschuh.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit 4d320e30ee ("rust: platform: fix unrestricted &mut
platform::Device") changed the definition of platform::Device and
discarded the implicitly derived Send and Sync traits.
This isn't required by upstream code yet, and hence did not cause any
issues. However, it is relied on by upcoming drivers, hence add it back
in.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250318212940.137577-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7b948a2af6 ("rust: pci: fix unrestricted &mut pci::Device")
changed the definition of pci::Device and discarded the implicitly
derived Send and Sync traits.
This isn't required by upstream code yet, and hence did not cause any
issues. However, it is relied on by upcoming drivers, hence add it back
in.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250318212940.137577-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:
$nm vmlinux | grep ' _R'.*SeqFile | rustfilt
ffff8000805b78ac T <kernel::seq_file::SeqFile>::call_printf
This Rust symbol is trivial wrappers around the C functions seq_printf.
It doesn't make sense to go through a trivial wrapper for its functions,
so mark it inline.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Link: https://lore.kernel.org/r/20250317030418.2371265-1-kunwu.chan@linux.dev
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:
$ nm vmlinux | grep ' _R'.*FileDescriptorReservation | rustfilt
... T <kernel::fs::file::FileDescriptorReservation>::fd_install
... T <kernel::fs::file::FileDescriptorReservation>::get_unused_fd_flags
... T <kernel::fs::file::FileDescriptorReservation as core::ops::drop::Drop>::drop
These Rust symbols are trivial wrappers around the C functions
fd_install, put_unused_fd and put_task_struct. It
doesn't make sense to go through a trivial wrapper for these
functions, so mark them inline.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Link: https://lore.kernel.org/r/20250317023702.2360726-1-kunwu.chan@linux.dev
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
As by now, platform::Device is implemented as:
#[derive(Clone)]
pub struct Device(ARef<device::Device>);
This may be convenient, but has the implication that drivers can call
device methods that require a mutable reference concurrently at any
point of time.
Instead define platform::Device as
pub struct Device<Ctx: DeviceContext = Normal>(
Opaque<bindings::platform_dev>,
PhantomData<Ctx>,
);
and manually implement the AlwaysRefCounted trait.
With this we can implement methods that should only be called from
bus callbacks (such as probe()) for platform::Device<Core>. Consequently,
we make this type accessible in bus callbacks only.
Arbitrary references taken by the driver are still of type
ARef<platform::Device> and hence don't provide access to methods that are
reserved for bus callbacks.
Fixes: 683a63befc ("rust: platform: add basic platform device / driver abstractions")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250314160932.100165-5-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As by now, pci::Device is implemented as:
#[derive(Clone)]
pub struct Device(ARef<device::Device>);
This may be convenient, but has the implication that drivers can call
device methods that require a mutable reference concurrently at any
point of time.
Instead define pci::Device as
pub struct Device<Ctx: DeviceContext = Normal>(
Opaque<bindings::pci_dev>,
PhantomData<Ctx>,
);
and manually implement the AlwaysRefCounted trait.
With this we can implement methods that should only be called from
bus callbacks (such as probe()) for pci::Device<Core>. Consequently, we
make this type accessible in bus callbacks only.
Arbitrary references taken by the driver are still of type
ARef<pci::Device> and hence don't provide access to methods that are
reserved for bus callbacks.
Fixes: 1bd8b6b2c5 ("rust: pci: add basic PCI device / driver abstractions")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250314160932.100165-4-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some bus device functions should only be called from bus callbacks,
such as probe(), remove(), resume(), suspend(), etc.
To ensure this add device context marker structs, that can be used as
generics for bus device implementations.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250314160932.100165-3-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify enable_device_mem() by using to_result() to handle the return
value of the corresponding FFI call.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250314160932.100165-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pin-init crate is now compiled in a standalone fashion, so revert
the earlier commit that disabled the doctests in pin-init in order to
avoid build errors while transitioning the crate into a standalone
version.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-22-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add readme and contribution guidelines of the user-space version of
pin-init.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-21-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Remove the last differences between the kernel version and the
user-space version.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250308110339.2997091-20-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Synchronize the internal macros crate with the user-space version that
uses the quote crate [1] instead of a custom `quote!` macro. The imports
in the different version are achieved using `cfg` on the kernel config
value. This cfg is always set in the kernel and never set in the
user-space version.
Since the quote crate requires the proc_macro2 crate, imports also need
to be adjusted and `.into()` calls have to be inserted.
Link: https://crates.io/crates/quote [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@Kloenk.dev>
Link: https://lore.kernel.org/r/20250308110339.2997091-19-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Synchronize documentation and examples with the user-space version.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-18-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
To synchronize the kernel's version of pin-init with the user-space
version, introduce support for `std` and `alloc`. While the kernel uses
neither, the user-space version has to support both. Thus include the
required `#[cfg]`s and additional code.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-17-benno.lossin@proton.me
[ Undo the temporary `--extern force:alloc` since now we have contents
for `alloc` here. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rename relative paths inside of the crate to still refer to the same
items, also rename paths inside of the kernel crate and adjust the build
system to build the crate.
[ Remove the `expect` (and thus the `lint_reasons` feature) since
the tree now uses `quote!` from `rust/macros/export.rs`. Remove the
`TokenStream` import removal, since it is now used as well.
In addition, temporarily (i.e. just for this commit) use an `--extern
force:alloc` to prevent an unknown `new_uninit` error in the `rustdoc`
target. For context, please see a similar case in:
https://lore.kernel.org/lkml/20240422090644.525520-1-ojeda@kernel.org/
And adjusted the message above. - Miguel ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-16-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add infrastructure for moving the initialization API to its own crate.
Covers all make targets such as `rust-analyzer` and `rustdoc`. The tests
of pin-init are not added to `rusttest`, as they are already tested in
the user-space repository [1].
Link: https://github.com/Rust-for-Linux/pin-init [1]
Co-developed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-15-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Change the paste macro path from `::kernel::macros::paste!` to use
`$crate::init::macros::paste!` instead, which links to
`::macros::paste!`. This is because the pin-init crate will be a
dependency of the kernel, so it itself cannot have the kernel as a
dependency.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-14-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to make pin-init a standalone crate, remove dependencies on
kernel-specific code such as `ScopeGuard` and `KBox`.
`ScopeGuard` is only used in the `[pin_]init_array_from_fn` functions
and can easily be replaced by a primitive construct.
`KBox` is only used for type variance of unsized types and can also
easily be replaced.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-13-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Before switching to compile the `pin-init` crate directly, change
any links that would be invalid to links that are valid both before and
after the switch.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-12-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When making pin-init its own crate, `Zeroable` will no longer be defined
by the kernel crate and thus implementing it for `Option<Box<T, A>>` is
no longer possible due to the orphan rule.
For this reason introduce a new `ZeroableOption` trait that circumvents
this problem.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-11-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to make pin-init a standalone crate, move kernel-specific code
directly into the kernel crate. Since `Opaque<T>` and `KBox<T>` are part
of the kernel, move their `Zeroable` implementation into the kernel
crate.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250308110339.2997091-10-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In order to make pin-init a standalone crate, move kernel-specific code
directly into the kernel crate. This includes the `InPlaceInit<T>`
trait, its implementations and the implementations of `InPlaceWrite` for
`Arc` and `UniqueArc`. All of these use the kernel's error type which
will become unavailable in pin-init.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-9-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Move the ability to just write `try_pin_init!(Foo { a <- a_init })`
(note the missing `? Error` at the end) into the kernel crate.
Remove this notation from the pin-init crate, since the default when no
error is specified is the kernel-internal `Error` type. Instead add two
macros in the kernel crate that serve this default and are used instead
of the ones from `pin-init`.
This is done, because the `Error` type that is used as the default is
from the kernel crate and it thus prevents making the pin-init crate
standalone.
In order to not cause a build error due to a name overlap, the macros in
the pin-init crate are renamed, but this change is reverted in a future
commit when it is a standalone crate.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-8-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `[pin_]init!` macros have the same behavior as the `try_[pin_]init!`
macros, except that they set the error type to `Infallible`.
Instead of calling the primitive `__init_internal!` with the correct
parameters, the same can thus be achieved by calling `try_[pin_]init!`.
Since this makes it more clear what their behavior is, simplify the
implementations of `[pin_]init!`.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-7-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace the examples in the documentation by the ones from the
user-space version and introduce the standalone examples from the
user-space version such as the `CMutex<T>` type.
The `CMutex<T>` example from the pinned-init repository [1] is used in
several documentation examples in the user-space version instead of the
kernel `Mutex<T>` type (as it's not available). In order to split off
the pin-init crate, all examples need to be free of kernel-specific
types.
Link: https://github.com/rust-for-Linux/pinned-init [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-6-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Move the documentation of proc-macros from pin-init-internal into
pin-init. This is because documentation can only reference types from
dependencies and pin-init-internal cannot have pin-init as a dependency,
as that would be cyclic.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-5-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In preparation of splitting off the pin-init crate from the kernel
crate, move all kernel-specific documentation from pin-init back into
the kernel crate.
Also include an example from the user-space version [1] adapted to the
kernel.
The new `init.rs` file will also be populated by kernel-specific
extensions to the pin-init crate by the next commits.
Link: c1417c64c7/src/lib.rs (L161) [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-4-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In preparation of splitting off the pin-init crate from the kernel
crate, move all pin-init API code (including proc-macros) into
`rust/pin-init`.
Moved modules have their import path adjusted via the `#[path = "..."]`
attribute. This allows the files to still be imported in the kernel
crate even though the files are in different directories.
Code that is moved out of files (but the file itself stays where it is)
is imported via the `include!` macro. This also allows the code to be
moved while still being part of the kernel crate.
Note that this commit moves the generics parsing code out of the GPL-2.0
file `rust/macros/helpers.rs` into the Apache-2.0 OR MIT file
`rust/pin_init/internal/src/helpers.rs`. I am the sole author of that
code and it already is available with that license at [1].
The same is true for the entry-points of the proc-macros `pin_data`,
`pinned_drop` and `derive_zeroable` in `rust/macros/lib.rs` that are
moved to `rust/pin_data/internal/src/lib.rs`. Although there are some
smaller patches that fix the doctests.
Link: https://github.com/Rust-for-Linux/pinned-init [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-3-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The build system cannot handle doctests in the kernel crate in files
outside of `rust/kernel/`. Subsequent commits will move files out of
that directory, but will still compile them as part of the kernel crate.
Thus ignore all doctests in the to-be-moved files.
Leave tests disabled until they are separated into their own crate and
they stop causing breakage.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Extend the Result documentation by some guidelines and examples how
to handle Result error cases gracefully. And how to not handle them.
While at it fix one missing `Result` link in the existing documentation.
[ Moved links out-of-line for improved readability. Fixed `srctree`
link. Sorted out-of-line links. Added newlines for consistency
with other docs. Applied paragraph break suggestion. Reworded
slightly the docs in a couple places. Added Markdown.
In addition, added `#[allow(clippy::single_match)` for the first
example. It cannot be an `expect` since due to a difference introduced
in Rust 1.85.0 when there are comments in the arms of the `match`.
Reported it upstream, but it was intended:
https://github.com/rust-lang/rust-clippy/issues/14418
Perhaps Clippy will lint about it in the future, but without autofix:
https://github.com/rust-lang/rust-clippy/pull/14420
- Miguel ]
Link: https://lore.kernel.org/rust-for-linux/CANiq72keOdXy0LFKk9SzYWwSjiD710v=hQO4xi+5E4xNALa6cA@mail.gmail.com/
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250122054719.595878-1-dirk.behme@de.bosch.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Toolchain and infrastructure:
- Disallow BTF generation with Rust + LTO.
- Improve rust-analyzer support.
'kernel' crate:
- 'init' module: remove 'Zeroable' implementation for a couple types
that should not have it.
- 'alloc' module: fix macOS failure in host test by satisfying POSIX
alignment requirement.
- Add missing '\n's to 'pr_*!()' calls.
And a couple other minor cleanups.
-----BEGIN PGP SIGNATURE-----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=F4QT
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Disallow BTF generation with Rust + LTO
- Improve rust-analyzer support
'kernel' crate:
- 'init' module: remove 'Zeroable' implementation for a couple types
that should not have it
- 'alloc' module: fix macOS failure in host test by satisfying POSIX
alignment requirement
- Add missing '\n's to 'pr_*!()' calls
And a couple other minor cleanups"
* tag 'rust-fixes-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
scripts: generate_rust_analyzer: add uapi crate
scripts: generate_rust_analyzer: add missing include_dirs
scripts: generate_rust_analyzer: add missing macros deps
rust: Disallow BTF generation with Rust + LTO
rust: task: fix `SAFETY` comment in `Task::wake_up`
rust: workqueue: add missing newline to pr_info! examples
rust: sync: add missing newline in locked_by log example
rust: init: add missing newline to pr_info! calls
rust: error: add missing newline to pr_warn! calls
rust: docs: add missing newline to printing macro examples
rust: alloc: satisfy POSIX alignment requirement
rust: init: fix `Zeroable` implementation for `Option<NonNull<T>>` and `Option<KBox<T>>`
rust: remove leftover mentions of the `alloc` crate
Allow the use of intrusive `hrtimer` fields in structs that are managed by
an `Arc` by implementing `HrTimerPointer` and `RawTimerCallbck` for `Arc`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-3-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add a method to get a pointer to the data contained in an `Arc`.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-2-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add support for intrusive use of the hrtimer system. For now,
only add support for embedding one timer per Rust struct.
The hrtimer Rust API is based on the intrusive style pattern introduced by
the Rust workqueue API.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-1-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
When building the kernel on Arch Linux using on x86_64 with tools:
$ rustc --version
rustc 1.84.0 (9fc6b4312 2025-01-07)
$ clang --version
clang version 19.1.7
Target: x86_64-pc-linux-gnu
The following symbols are generated:
$ nm vmlinux | rg ' _R' | rustfilt | rg faux
ffffffff81959ae0 T <kernel::faux::Registration>::new
ffffffff81959b40 T <kernel::faux::Registration as core::ops::drop::Drop>::drop
However, these Rust symbols are wrappers around bindings in the C faux
code. Inlining these functions removes the middle-man wrapper function
After applying this patch, the above function signatures disappear.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/jesg4yu7m6fvzmgg5tlsktrrjm36l4qsranto5mdmnucx4pvf3@nhvt4juw5es3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `SAFETY` comment inside the `wake_up` method references
erroneously the `signal_pending` C function instead of the
`wake_up_process` which is actually called.
Fix the comment to reference the correct C function.
Fixes: fe95f58320 ("rust: task: adjust safety comments in Task methods")
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250308-comment-fix-v1-1-4bba709fd36d@posteo.net
[ Slightly reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In the `module!` macro, the `author` field is currently of type `String`.
Since modules can have multiple authors, this limitation prevents
specifying more than one.
Add an `authors` field as `Option<Vec<String>>` to allow creating
modules with multiple authors, and change the documentation and all
current users to use it. Eventually, the single `author` field may
be removed.
[ The `modinfo` key needs to still be `author`; otherwise, tooling
may not work properly, e.g.:
$ modinfo --author samples/rust/rust_print.ko
Rust for Linux Contributors
I have also kept the original `author` field (undocumented), so
that we can drop it more easily in a kernel cycle or two.
- Miguel ]
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/244
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
Link: https://lore.kernel.org/r/20250309175712.845622-2-trintaeoitogc@gmail.com
[ Fixed `modinfo` key. Kept `author` field. Reworded message
accordingly. Updated my email. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This validates at compile time that the signatures match what is in the
header file. It highlights one annoyance with the compile-time check,
which is that it can only be used with functions marked unsafe.
If the function is not unsafe, then this error is emitted:
error[E0308]: `if` and `else` have incompatible types
--> <linux>/drivers/gpu/drm/drm_panic_qr.rs:987:19
|
986 | #[export]
| --------- expected because of this
987 | pub extern "C" fn drm_panic_qr_max_data_size(version: u8, url_len: usize) -> usize {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^ expected unsafe fn, found safe fn
|
= note: expected fn item `unsafe extern "C" fn(_, _) -> _ {kernel::bindings::drm_panic_qr_max_data_size}`
found fn item `extern "C" fn(_, _) -> _ {drm_panic_qr_max_data_size}`
The signature declarations are moved to a header file so it can be
included in the Rust bindings helper, and the extern keyword is removed
as it is unnecessary.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-5-41fbad85a27f@google.com
[ Fixed `rustfmt`. Moved on top the unsafe requirement comment to follow
the usual style, and slightly reworded it for clarity. Formatted
bindings helper comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This moves the rust_fmt_argument function over to use the new #[export]
macro, which will verify at compile-time that the function signature
matches what is in the header file.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-4-41fbad85a27f@google.com
[ Removed period as requested by Andy. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust has two different tools for generating function declarations to
call across the FFI boundary:
* bindgen. Generates Rust declarations from a C header.
* cbindgen. Generates C headers from Rust declarations.
However, we only use bindgen in the kernel. This means that when C code
calls a Rust function by name, its signature must be duplicated in both
Rust code and a C header, and the signature needs to be kept in sync
manually.
Introducing cbindgen as a mandatory dependency to build the kernel would
be a rather complex and large change, so we do not consider that at this
time. Instead, to eliminate this manual checking, introduce a new macro
that verifies at compile time that the two function declarations use the
same signature. The idea is to run the C declaration through bindgen,
and then have rustc verify that the function pointers have the same
type.
The signature must still be written twice, but at least you can no
longer get it wrong. If the signatures don't match, you will get errors
that look like this:
error[E0308]: `if` and `else` have incompatible types
--> <linux>/rust/kernel/print.rs:22:22
|
21 | #[export]
| --------- expected because of this
22 | unsafe extern "C" fn rust_fmt_argument(
| ^^^^^^^^^^^^^^^^^ expected `u8`, found `i8`
|
= note: expected fn item `unsafe extern "C" fn(*mut u8, *mut u8, *mut c_void) -> *mut u8 {bindings::rust_fmt_argument}`
found fn item `unsafe extern "C" fn(*mut i8, *mut i8, *const c_void) -> *mut i8 {print::rust_fmt_argument}`
It is unfortunate that the error message starts out by saying "`if` and
`else` have incompatible types", but I believe the rest of the error
message is reasonably clear and not too confusing.
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-3-41fbad85a27f@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This gives the quote! macro support for the following additional tokens:
* The = token.
* The _ token.
* The # token. (when not followed by an identifier)
* Using #my_var with variables of type Ident.
Additionally, some type annotations are added to allow cases where
groups are empty. For example, quote! does support () in the input, but
only when it is *not* empty. When it is empty, there are zero `.push`
calls, so the compiler can't infer the item type and also emits a
warning about it not needing to be mutable.
These additional quote! features are used by a new proc macro that
generates code looking like this:
const _: () = {
if true {
::kernel::bindings::#name
} else {
#name
};
};
where #name has type Ident.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-2-41fbad85a27f@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Without this change, the rest of this series will emit the following
error message:
error[E0308]: `if` and `else` have incompatible types
--> <linux>/rust/kernel/print.rs:22:22
|
21 | #[export]
| --------- expected because of this
22 | unsafe extern "C" fn rust_fmt_argument(
| ^^^^^^^^^^^^^^^^^ expected `u8`, found `i8`
|
= note: expected fn item `unsafe extern "C" fn(*mut u8, *mut u8, *mut c_void) -> *mut u8 {bindings::rust_fmt_argument}`
found fn item `unsafe extern "C" fn(*mut i8, *mut i8, *const c_void) -> *mut i8 {print::rust_fmt_argument}`
The error may be different depending on the architecture.
To fix this, change the void pointer argument to use a const pointer,
and change the imports to use crate::ffi instead of core::ffi for
integer types.
Fixes: 787983da77 ("vsprintf: add new `%pA` format specifier")
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-1-41fbad85a27f@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Analogous to the `module!` macro `module_firmware!` adds additional
firmware path strings to the .modinfo section.
In contrast to `module!`, where path strings need to be string literals,
path strings can be composed with the `firmware::ModInfoBuilder`.
Some drivers require a lot of firmware files (such as nova-core) and
hence benefit from more flexibility composing firmware path strings.
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250306222336.23482-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The `firmware` field of the `module!` only accepts literal strings,
which is due to the fact that it is implemented as a proc macro.
Some drivers require a lot of firmware files (such as nova-core) and
hence benefit from more flexibility composing firmware path strings.
The `firmware::ModInfoBuilder` is a helper component to flexibly compose
firmware path strings for the .modinfo section in const context.
It is meant to be used in combination with `kernel::module_firmware!`.
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250306222336.23482-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The `LocalModule` type is the type of the module created by `module!`,
`module_pci_driver!`, `module_platform_driver!`, etc.
Since the exact type of the module is sometimes generated on the fly by
the listed macros, provide an alias.
This is first used by the `module_firmware!` macro.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250306222336.23482-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
I've been using the linked list cursor for a few different things, and I
find it inconvenient to use because all of the functions have signatures
along the lines of `Self -> Option<Self>`. The root cause of these
signatures is that the cursor points *at* an element, rather than
*between* two elements.
Thus, change the cursor API to point between two elements. This is
inspired by the stdlib linked list (well, really by this guy [1]), which
also uses cursors that point between elements.
The `peek_next` method returns a helper that lets you look at and
optionally remove the element, as one common use-case of cursors is to
iterate a list to look for an element, then remove that element.
For many of the methods, this will reduce how many we need since they
now just need a prev/next method, instead of the current state where you
may end up needing all of curr/prev/next. Also, if we decide to add a
function for splitting a list into two lists at the cursor, then a
cursor that points between elements is exactly what makes the most
sense.
Another advantage is that this means you can now have a cursor into an
empty list.
Link: https://rust-unofficial.github.io/too-many-lists/sixth-cursors-intro.html [1]
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250210-cursor-between-v7-2-36f0215181ed@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
To prepare for a new cursor API that has the ability to insert elements
into the list, extract the common code needed for this operation into a
new `insert_inner` method.
Both `push_back` and `push_front` are updated to use the new function.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250210-cursor-between-v7-1-36f0215181ed@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reintroduce dynamically-allocated LockClassKeys such that they are
automatically (de)registered. Require that all usages of LockClassKeys
ensure that they are Pin'd.
Currently, only `'static` LockClassKeys are supported, so Pin is
redundant. However, it is intended that dynamically-allocated
LockClassKeys will eventually be supported, so using Pin from the outset
will make that change simpler.
Closes: https://github.com/Rust-for-Linux/linux/issues/1102
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Mitchell Levy <levymitchell0@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250307232717.1759087-12-boqun.feng@gmail.com
To support waiting for a `CondVar` as a freezable process, add a
wait_interruptible_freezable() function.
Binder needs this function in the appropriate places to freeze a process
where some of its threads are blocked on the Binder driver.
[ Boqun: Cleaned up the changelog and documentation. ]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307232717.1759087-10-boqun.feng@gmail.com
In order to assert a particular `Guard` is associated with a particular
`Lock`, add an accessor to obtain a reference to the underlying `Lock`
of a `Guard`.
Binder needs this assertion to ensure unsafe list operations are done
with the correct lock held.
[Boqun: Capitalize the title and reword the commit log]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250205-guard-get-lock-v2-1-ba32a8c1d5b7@google.com
Link: https://lore.kernel.org/r/20250307232717.1759087-8-boqun.feng@gmail.com
Currently, dynamically allocated LockCLassKeys can be used from the Rust
side without having them registered. This is a soundness issue, so
remove them.
Fixes: 6ea5aa0885 ("rust: sync: introduce `LockClassKey`")
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Mitchell Levy <levymitchell0@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307232717.1759087-11-boqun.feng@gmail.com
I was helping someone with writing a new Rust abstraction, and we were
using the miscdevice abstraction as an example. While doing this, it
became clear to me that the way I implemented the f_ops vtable is
confusing to new Rust users, and that the approach used by the block
abstractions is less confusing.
Thus, update the miscdevice abstractions to use the same approach as
rust/kernel/block/mq/operations.rs.
Sorry about the large diff. This changes the indentation of a large
amount of code.
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250227-miscdevice-fops-change-v1-1-c9e9b75d67eb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Pid type alias represents the integer type used for pids in the
kernel. It's the Rust equivalent to pid_t, and there are various methods
on Task that use Pid as the return type.
Binder needs to use Pid as the type for function arguments and struct
fields in many places. Thus, make the type public so that Binder can
access it.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250130-task-pid-pub-v1-1-508808bcfcdc@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This function can be called with different function pointers when
different allocator (e.g. Kmalloc, Vmalloc, KVmalloc), however since
this function is not polymorphic, only one instance is generated,
and function pointers are used. Given that this function is called
for any Rust-side allocation/deallocation, performance matters a lot,
so making this function inlineable.
This is discovered when doing helper inlining work, since it's discovered
that even with helpers inlined, rust_helper_ symbols are still present
in final vmlinux binary, and it turns out this function is inhibiting
the inlining, and introducing indirect function calls.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250105194054.545201-4-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The documentation examples in rust/kernel/workqueue.rs use pr_info!
calls that lack a trailing newline. To maintain consistency with
kernel logging practices, this patch adds the newline to all
affected examples.
Fixes: 15b286d1fd ("rust: workqueue: add examples")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-5-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The pr_info! example in rust/kernel/sync/locked_by.rs was missing
a newline. This patch appends the missing newline to ensure
that log messages for locked resources display correctly.
Fixes: 7b1f55e3a9 ("rust: sync: introduce `LockedBy`")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-4-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Several pr_info! calls in rust/kernel/init.rs (both in code examples
and macro documentation) were missing a newline, causing logs to
run together. This commit updates these calls to include a trailing
newline, improving readability and consistency with the C side.
Fixes: 6841d45a30 ("rust: init: add `stack_pin_init!` macro")
Fixes: 7f8977a7fe ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Fixes: d0fdc39612 ("rust: init: add `PinnedDrop` trait and macros")
Fixes: 4af84c6a85 ("rust: init: update expanded macro explanation")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-3-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. Added
one more Fixes tag (still same set of stable kernels). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ISO C's `aligned_alloc` is partially implementation-defined; on some
systems it inherits stricter requirements from POSIX's `posix_memalign`.
This causes the call added in commit dd09538fb4 ("rust: alloc:
implement `Cmalloc` in module allocator_test") to fail on macOS because
it doesn't meet the requirements of `posix_memalign`.
Adjust the call to meet the POSIX requirement and add a comment. This
fixes failures in `make rusttest` on macOS.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Cc: stable@vger.kernel.org
Fixes: dd09538fb4 ("rust: alloc: implement `Cmalloc` in module allocator_test")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250213-aligned-alloc-v7-1-d2a2d0be164b@gmail.com
[ Added Cc: stable. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In commit 392e34b6bc ("kbuild: rust: remove the `alloc` crate and
`GlobalAlloc`") we stopped using the upstream `alloc` crate.
Thus remove a few leftover mentions treewide.
Cc: stable@vger.kernel.org # Also to 6.12.y after the `alloc` backport lands
Fixes: 392e34b6bc ("kbuild: rust: remove the `alloc` crate and `GlobalAlloc`")
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250303171030.1081134-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When you build the kernel using the llvm-19.1.4-rust-1.83.0-x86_64
toolchain provided by kernel.org with ARCH=arm64, the following symbols
are generated:
$ nm out-linux/vmlinux | grep ' _R'.*Credential | rustfilt
... T <kernel::cred::Credential>::get_secid
... T <kernel::cred::Credential as
kernel::types::AlwaysRefCounted>::dec_ref
... T <kernel::cred::Credential as
kernel::types::AlwaysRefCounted>::inc_ref
However, these Rust symbols are trivial wrappers around the functions
security_cred_getsecid, get_cred, and put_cred respectively. It doesn't
make sense to go through a trivial wrapper for these functions, so mark
them inline. Also mark other trivial methods inline to prevent similar
cases in the future.
After applying this patch, the above command will produce no output.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
[PM: subject tweak, description line trims]
Signed-off-by: Paul Moore <paul@paul-moore.com>
What happens inside the individual LSMs for a given LSM hook can vary
quite a bit, so it is best to use the terminology "release" instead of
"destroy" or "free".
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
When you build the kernel using the llvm-19.1.4-rust-1.83.0-x86_64
toolchain provided by kernel.org with ARCH=arm64, the following symbols
are generated:
$ nm vmlinux | grep ' _R'.*SecurityCtx | rustfilt
... T <kernel::security::SecurityCtx>::from_secid
... T <kernel::security::SecurityCtx as core::ops::drop::Drop>::drop
However, these Rust symbols are trivial wrappers around the functions
security_secid_to_secctx and security_release_secctx respectively. It
doesn't make sense to go through a trivial wrapper for these functions,
so mark them inline. Also mark other trivial methods inline to prevent
similar cases in the future.
After applying this patch, the above command will produce no output.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
[PM: trimmed long description lines, subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
In order to prepare for adding Rust abstractions for cpumask, add
the required helpers for inline cpumask functions that cannot be
called by rust code directly.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
A little late in the review of the faux device interface, we added the
ability to specify a parent device when creating new faux devices - but
this never got ported over to the rust bindings. So, let's add the missing
argument now so we don't have to convert other users later down the line.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250227193522.198344-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I think this change got missed during review, we don't need
#[repr(transparent)] since Registration just holds a single NonNull. This
attribute had originally been added by me when I was still figuring out how
the bindings should look like but got committed by mistake. So, just drop
it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Fiona Behrens <me@Kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250225213112.872264-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide safe getters to the system bh work queues. They will be used
to reimplement the Hyper-V VMBus in rust.
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Rename the I/O accessors provided by `Io` to encode the type as
number instead of letter. This is in preparation for Port I/O support
to use a trait for generic accessors.
Add a `c_fn` argument to the accessor generation macro to translate
between rust and C names.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/PIO.20support/near/499460541
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250217-io-generic-rename-v1-1-06d97a9e3179@kloenk.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is a driver core new api for 6.14-rc3 that is being added to allow
platform devices from stop being abused. It adds a new "faux_device"
structure and bus and api to allow almost a straight or simpler
conversion from platform devices that were not really a platform device.
It also comes with a binding for rust, with an example driver in rust
showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now through
their different development trees, in time for 6.15-rc1. We have a
number that are already reviewed and tested, but adding those
conversions now doesn't seem right. For now, no one is using this, and
it passes all build tests from 0-day and linux-next, so all should be
good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H+sQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yljfwCfdP8AvZeIdx89cqS0djspBSFLw1MAoIpq7Pbi
6BY+VOuDSZNdBKXFLR/x
=2qRL
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
This introduces a module for working with faux devices in rust, along with
adding sample code to show how the API is used. Unlike other types of
devices, we don't provide any hooks for device probe/removal - since these
are optional for the faux API and are unnecessary in rust.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Starting with Rust 1.86.0 (to be released 2025-04-03), Clippy will have
a new lint, `doc_overindented_list_items` [1], which catches cases of
overindented list items.
The lint has been added by Yutaro Ohno, based on feedback from the kernel
[2] on a patch that fixed a similar case -- commit 0c5928dead ("rust:
block: fix formatting in GenDisk doc").
Clippy reports a few cases in the kernel, apart from the one already
fixed in the commit above. One is this one:
error: doc list item overindented
--> rust/kernel/rbtree.rs:1152:5
|
1152 | /// null, it is a pointer to the root of the [`RBTree`].
| ^^^^ help: try using ` ` (2 spaces)
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items
= note: `-D clippy::doc-overindented-list-items` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::doc_overindented_list_items)]`
Thus clean it up.
Cc: Yutaro Ohno <yutaro.ono.418@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: a335e95914 ("rust: rbtree: add `RBTree::entry`")
Link: https://github.com/rust-lang/rust-clippy/pull/13711 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/13601 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Link: https://lore.kernel.org/r/20250206232022.599998-1-ojeda@kernel.org
[ There are a few other cases, so updated message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ASAN generates special synthetic symbols to help check for ODR
violations. These synthetic symbols lack debug information, so
gendwarfksyms emits warnings when processing them. No code should ever
have a dependency on these symbols, so we should not be exporting them,
just like the __cfi symbols.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250122-gendwarfksyms-kasan-rust-v1-1-5ee5658f4fb6@google.com
[ Fixed typo in commit message. Slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This seems to break the build when building with gcc15:
Unable to generate bindings: ClangDiagnostic("error: unknown
argument: '-fzero-init-padding-bits=all'\n")
Thus skip that flag.
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Fixes: dce4aab844 ("kbuild: Use -fzero-init-padding-bits=all")
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250129215003.1736127-1-jforbes@fedoraproject.org
[ Slightly reworded commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Starting with Rust 1.86.0 (currently in nightly, to be released on
2025-04-03), the `missing_abi` lint is warn-by-default [1]:
error: extern declarations without an explicit ABI are deprecated
--> rust/doctests_kernel_generated.rs:3158:1
|
3158 | extern {
| ^^^^^^ help: explicitly specify the C ABI: `extern "C"`
|
= note: `-D missing-abi` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(missing_abi)]`
Thus clean it up.
Cc: <stable@vger.kernel.org> # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 7f8977a7fe ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Link: https://github.com/rust-lang/rust/pull/132397 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250121200934.222075-1-ojeda@kernel.org
[ Added 6.13.y to Cc: stable tag. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There seems to have been merge skew between commit b2c261fa86 ("rust:
kbuild: expand rusttest target for macros") and commit 0730422bce
("rust: use host dylib naming convention to support macOS") ; the latter
replaced `libmacros.so` with `$(libmacros_name)` and the former added an
instance of `libmacros.so`. The former was not yet applied when the
latter was sent, resulting in a stray `libmacros.so`. Replace the stray
with `$(libmacros_name)` to allow `rusttest` to build on macOS.
Fixes: 0730422bce ("rust: use host dylib naming convention to support macOS")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250201-fix-mac-build-again-v1-1-ca665f5d7de7@gmail.com
[ Slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
-----BEGIN PGP SIGNATURE-----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=D553
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
-----BEGIN PGP SIGNATURE-----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=fgyr
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Improved handling of LSM "secctx" strings through lsm_context struct
The LSM secctx string interface is from an older time when only one
LSM was supported, migrate over to the lsm_context struct to better
support the different LSMs we now have and make it easier to support
new LSMs in the future.
These changes explain the Rust, VFS, and networking changes in the
diffstat.
- Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are
enabled
Small tweak to be a bit smarter about when we build the LSM's common
audit helpers.
- Check for absurdly large policies from userspace in SafeSetID
SafeSetID policies rules are fairly small, basically just "UID:UID",
it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which
helps quiet a number of syzbot related issues. While work is being
done to address the syzbot issues through other mechanisms, this is a
trivial and relatively safe fix that we can do now.
- Various minor improvements and cleanups
A collection of improvements to the kernel selftests, constification
of some function parameters, removing redundant assignments, and
local variable renames to improve readability.
* tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: initialize local array before use to quiet static analysis
safesetid: check size of policy writes
net: corrections for security_secid_to_secctx returns
lsm: rename variable to avoid shadowing
lsm: constify function parameters
security: remove redundant assignment to return variable
lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set
selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test
binder: initialize lsm_context structure
rust: replace lsm context+len with lsm_context
lsm: secctx provider check on release
lsm: lsm_context in security_dentry_init_security
lsm: use lsm_context in security_inode_getsecctx
lsm: replace context+len with lsm_context
lsm: ensure the correct LSM context releaser
Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a few
cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using only
stable Rust features. In particular, previously we were using the
unstable features 'coerce_unsized', 'dispatch_from_dyn' and 'unsize',
and now we will use the new 'derive_coerce_pointee' one, which is on
track to stabilization. This new feature is a macro that essentially
expands into code that internally uses the unstable features that we
were using before, without having to expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'.
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmeNeRsACgkQGXyLc2ht
IW0exRAAx3ag/JaiR3n5aDBJqUX/Vi6/u+3fTiHOGp9oMFK4ZYR9rlWIr0ArU8a0
4PApTR5ozrD+lgD1gCjHikhvpacLoTcz0WD0sP8qWlSqQFiMcTXmmWQfeJc7hheE
4zyKlxswvbHjnOs/k24i5FS4E/CRpC7TJT5RkybaWVunsIps/im4xTnXfUzMhjVG
SWcRaJtQA8xze9iiRlqw9EFQL6iT5gIKAe0I2i2J+zYzsY6m23fQ/8IxvglaiSDT
/GIIqDscMH6drfQFRsvTtkcw0Mq64e6hlyWS9s4b9Q0IhgS0sju0qbQrfLLet75t
1r+JlBZYhQy+4LXZTgBmQ8mVR8NEurnsOullm2AoTy6EYCPvXExSv4JCXYVvgPh+
d4j/0pCeKUg9aDUtuEAUPHGQk1j7mORGf4J8jPQXla/7/YfqJvluycpMe54gLZpA
FU24aqtb5/q3/Gqm8omKe/7FdYsu44E1haiP77bhNeYM3pWJrlIovBCafBtc1mQM
lMtK6EjiQqrz1kEWutx+RQeeiir1G++GlVNGO2LSdNi/6qfjfBQM9dEqsCc8i3XL
rsLL368SEKQENhSNJFceg6RX37WPwcyIkHAeZ91ijSz6W4I5HtUZpD3UPcgJoiaS
xuOi44bR6Lt0zXF7eaXZTUh2gf8o++tsgfc4OZPaZ3azn6Y3pXw=
=VLNX
-----END PGP SIGNATURE-----
Merge tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a
few cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using
only stable Rust features. In particular, previously we were using
the unstable features 'coerce_unsized', 'dispatch_from_dyn' and
'unsize', and now we will use the new 'derive_coerce_pointee' one,
which is on track to stabilization. This new feature is a macro
that essentially expands into code that internally uses the
unstable features that we were using before, without having to
expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups"
* tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits)
kbuild: rust: add PROCMACROLDFLAGS
rust: uaccess: generalize userSliceReader to support any Vec
rust: kernel: add improved version of `ForeignOwnable::borrow_mut`
rust: kernel: reorder `ForeignOwnable` items
rust: kernel: change `ForeignOwnable` pointer to mut
rust: arc: split unsafe block, add missing comment
rust: types: avoid `as` casts
rust: arc: use `NonNull::new_unchecked`
rust: use derive(CoercePointee) on rustc >= 1.84.0
rust: alloc: add doctest for `ArrayLayout::new()`
rust: init: update `stack_try_pin_init` examples
rust: error: import `kernel`'s `LayoutError` instead of `core`'s
rust: str: replace unwraps with question mark operators
rust: page: remove unnecessary helper function from doctest
rust: rbtree: remove unwrap in asserts
rust: init: replace unwraps with question mark operators
rust: use host dylib naming convention to support macOS
rust: add `build_error!` to the prelude
rust: kernel: move `build_error` hidden function to prevent mistakes
rust: use the `build_error!` macro, not the hidden function
...
- Lockdep:
- Improve and fix lockdep bitsize limits, clarify the Kconfig
documentation (Carlos Llamas)
- Fix lockdep build warning on Clang related to
chain_hlock_class_idx() inlining (Andy Shevchenko)
- Relax the requirements of PROVE_RAW_LOCK_NESTING arch support
by not tying it to ARCH_SUPPORTS_RT unnecessarily (Waiman Long)
- Rust integration:
- Support lock pointers managed by the C side (Lyude Paul)
- Support guard types (Lyude Paul)
- Update MAINTAINERS file filters to include the
Rust locking code (Boqun Feng)
- Wake-queues:
- Add raw_spin_*wake() helpers to simplify locking code (John Stultz)
- SMP cross-calls:
- Fix potential data update race by evaluating the local cond_func()
before IPI side-effects (Mathieu Desnoyers)
- Guard primitives:
- Ease [c]tags based searches by including the cleanup/guard type
primitives (Peter Zijlstra)
- ww_mutexes:
- Simplify the ww_mutex self-test code via swap() (Thorsten Blum)
- Static calls:
- Update the static calls MAINTAINERS file-pattern (Jiri Slaby)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmeOCPcRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1g1Eg/9HapUGZyNSN9Se8F5zWCzIS+85hPgZIAd
0FLm2uMc+zsGGQZ7pxsqofuLlTVLBigfq1TJnddEIFg3dYGG8hUUNav3eS1NWIlW
SZIsp6qZwDSwfrHMg5rs1e7ACYRmKlMRKkWHuSYnwwN6XmJfGmWXd9XW4Aokrqou
1+t5Zhv3eieo7Fk+nfmuVK/T8VfWWBD8gbTqI15KTrdnxIqcfDy5Dq+7urk/OkSD
IgMf3sHvNEj3lUPFQK+emp2TVC158Yi2awj8ZbzsECmQRUY0hh9/K/yoU5TY2S/O
EJGaF253/Tc1k48vz1cB3Lqrl4ZqPNsDu0vYEvMS2L78E1904qfq1EvICJj98Q/c
wmPmPyUTKl7+00o8btpMz++5Ro0qxnhN7Phhxfbc6iNIo3wVueoAzQM/bWWCVQ6E
Lar9QXQsawBUA3tplrX7JBRAk/qVoz+9pxp0J7AKavCWar3XseKRCpbpn7HNV57B
mhkg5zxJMpAaKbyMgrOPpsNovq39rbw0gSAt5o3yxqZAoCJ6x5ol5y0MhPwzymIz
TAjdvzo/DHAaDSuBq4BnuffkZpYYgEOTdaO3z+aVR0hsZJ0VQP2AUA7Mv293EOZd
I+U6XRd4jUKm1C+5S5XuNMjQG7iX45mPTIs3R6qnatqHuPXrKZobeRHSdK6aX9ZO
HuD5iZSq1vg=
=yCzP
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lockdep:
- Improve and fix lockdep bitsize limits, clarify the Kconfig
documentation (Carlos Llamas)
- Fix lockdep build warning on Clang related to
chain_hlock_class_idx() inlining (Andy Shevchenko)
- Relax the requirements of PROVE_RAW_LOCK_NESTING arch support by
not tying it to ARCH_SUPPORTS_RT unnecessarily (Waiman Long)
Rust integration:
- Support lock pointers managed by the C side (Lyude Paul)
- Support guard types (Lyude Paul)
- Update MAINTAINERS file filters to include the Rust locking code
(Boqun Feng)
Wake-queues:
- Add raw_spin_*wake() helpers to simplify locking code (John Stultz)
SMP cross-calls:
- Fix potential data update race by evaluating the local cond_func()
before IPI side-effects (Mathieu Desnoyers)
Guard primitives:
- Ease [c]tags based searches by including the cleanup/guard type
primitives (Peter Zijlstra)
ww_mutexes:
- Simplify the ww_mutex self-test code via swap() (Thorsten Blum)
Static calls:
- Update the static calls MAINTAINERS file-pattern (Jiri Slaby)"
* tag 'locking-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add static_call_inline.c to STATIC BRANCH/CALL
cleanup, tags: Create tags for the cleanup primitives
sched/wake_q: Add helper to call wake_up_q after unlock with preemption disabled
rust: sync: Add lock::Backend::assert_is_held()
rust: sync: Add SpinLockGuard type alias
rust: sync: Add MutexGuard type alias
rust: sync: Make Guard::new() public
rust: sync: Add Lock::from_raw() for Lock<(), B>
locking: MAINTAINERS: Start watching Rust locking primitives
lockdep: Move lockdep_assert_locked() under #ifdef CONFIG_PROVE_LOCKING
lockdep: Mark chain_hlock_class_idx() with __maybe_unused
lockdep: Document MAX_LOCKDEP_CHAIN_HLOCKS calculation
lockdep: Clarify size for LOCKDEP_*_BITS configs
lockdep: Fix upper limit for LOCKDEP_*_BITS configs
locking/ww_mutex/test: Use swap() macro
smp/scf: Evaluate local cond_func() before IPI side-effects
locking/lockdep: Enforce PROVE_RAW_LOCK_NESTING only if ARCH_SUPPORTS_RT
-----BEGIN PGP SIGNATURE-----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=EXYs
-----END PGP SIGNATURE-----
Merge tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
Previously, two things stopped Rust from using MODVERSIONS:
1. Rust symbols are occasionally too long to be represented in the
original versions table
2. Rust types cannot be properly hashed by the existing genksyms
approach because:
* Looking up type definitions in Rust is more complex than C
* Type layout is potentially dependent on the compiler in Rust,
not just the source type declaration.
CONFIG_EXTENDED_MODVERSIONS addresses the first point, and
CONFIG_GENDWARFKSYMS the second. If Rust wants to use MODVERSIONS, allow
it to do so by selecting both features.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Co-developed-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The property_present() method expects a &CString currently and will work
only with heap allocated C strings.
In order to make it work with compile-time string constants too, change
the argument type to &CStr.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/e97dcbe0418cc1053fb4bcfac65cc02a0afcdf78.1737005078.git.viresh.kumar@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are flags to be passed when linking proc macros for the Rust
toolchain. If unset, it defaults to $(KBUILD_HOSTLDFLAGS).
This is needed because the list of flags to link hostprogs is not
necessarily the same as the list of flags used to link libmacros.so.
When we build proc macros, we need the latter, not the former (e.g. when
using a Rust compiler binary linked to a different C library than host
programs).
To distinguish between the two, introduce this new variable to stand
out from KBUILD_HOSTLDFLAGS used to link other host progs.
Signed-off-by: HONG Yifan <elsk@google.com>
Link: https://lore.kernel.org/r/20241017210430.2401398-2-elsk@google.com
[ v3:
- `export`ed the variable. Otherwise it would not be visible in
`rust/Makefile`.
- Removed "additional" from the documentation and commit message,
since this actually replaces the other flags, unlike other cases.
- Added example of use case to documentation and commit message.
Thanks Alice for the details on what Google needs!
- Instead of `HOSTLDFLAGS`, used `KBUILD_HOSTLDFLAGS` as the fallback
to preserve the previous behavior as much as possible, as discussed
with Alice/Yifan. Thus moved the variable down too (currently we
do not modify `KBUILD_HOSTLDFLAGS` elsewhere) and avoided
mentioning `HOSTLDFLAGS` directly in the documentation.
- Fixed documentation header formatting.
- Reworded slightly.
- Miguel ]
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: HONG Yifan <elsk@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241112184455.855133-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The UserSliceReader::read_all function is currently restricted to use
only Vec with the kmalloc allocator. However, there is no reason for
this limitation.
This patch generalizes the function to accept any Vec regardless of the
allocator used.
There's a use-case for a KVVec in Binder to avoid maximum sizes for a
certain array.
Link: https://github.com/Rust-for-Linux/linux/issues/1136
Signed-off-by: Filipe Xavier <felipeaggger@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250107-gen-userslice-readall-alloc-v2-1-d7fe4d19241a@gmail.com
[ Reflowed and slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Previously, the `ForeignOwnable` trait had a method called `borrow_mut`
that was intended to provide mutable access to the inner value. However,
the method accidentally made it possible to change the address of the
object being modified, which usually isn't what we want. (And when we
want that, it can be done by calling `from_foreign` and `into_foreign`,
like how the old `borrow_mut` was implemented.)
In this patch, we introduce an alternate definition of `borrow_mut` that
solves the previous problem. Conceptually, given a pointer type `P` that
implements `ForeignOwnable`, the `borrow_mut` method gives you the same
kind of access as an `&mut P` would, except that it does not let you
change the pointer `P` itself.
This is analogous to how the existing `borrow` method provides the same
kind of access to the inner value as an `&P`.
Note that for types like `Arc`, having an `&mut Arc<T>` only gives you
immutable access to the inner `T`. This is because mutable references
assume exclusive access, but there might be other handles to the same
reference counted value, so the access isn't exclusive. The `Arc` type
implements this by making `borrow_mut` return the same type as `borrow`.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-6-80dbadd00951@gmail.com
[ Updated to `crate::ffi::`. Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`{into,from}_foreign` before `borrow` is slightly more logical.
This removes an inconsistency with `kbox.rs` which already uses this
ordering.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-5-80dbadd00951@gmail.com
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It is slightly more convenient to operate on mut pointers, and this also
properly conveys the desired ownership semantics of the trait.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-4-80dbadd00951@gmail.com
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The new SAFETY comment style is taken from existing comments in `deref`
and `drop.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-3-80dbadd00951@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace `as` casts with `cast{,_mut}` calls which are a bit safer.
In one instance, remove an unnecessary `as` cast without replacement.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-2-80dbadd00951@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There is no need to check (and panic on violations of) the safety
requirements on `ForeignOwnable` functions. Avoiding the check is
consistent with the implementation of `ForeignOwnable` for `Box`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-1-80dbadd00951@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `kernel` crate relies on both `coerce_unsized` and `dispatch_from_dyn`
unstable features.
Alice Ryhl has proposed [1] the introduction of the unstable macro
`SmartPointer` to reduce such dependence, along with a RFC patch [2].
Since Rust 1.81.0 this macro, later renamed to `CoercePointee` in
Rust 1.84.0 [3], has been fully implemented with the naming discussion
resolved.
This feature is now on track to stabilization in the language.
In order to do so, we shall start using this macro in the `kernel` crate
to prove the functionality and utility of the macro as the justification
of its stabilization.
This patch makes this switch in such a way that the crate remains
backward compatible with older Rust compiler versions,
via the new Kconfig option `RUSTC_HAS_COERCE_POINTEE`.
A minimal demonstration example is added to the
`samples/rust/rust_print_main.rs` module.
Link: https://rust-lang.github.io/rfcs/3621-derive-smart-pointer.html [1]
Link: https://lore.kernel.org/all/20240823-derive-smart-pointer-v1-1-53769cd37239@google.com/ [2]
Link: https://github.com/rust-lang/rust/pull/131284 [3]
Signed-off-by: Xiangfei Ding <dingxiangfei2009@gmail.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241203205050.679106-2-dingxiangfei2009@gmail.com
[ Fixed version to 1.84. Renamed option to `RUSTC_HAS_COERCE_POINTEE`
to match `CC_HAS_*` ones. Moved up new config option, closer to the
`CC_HAS_*` ones. Simplified Kconfig line. Fixed typos and slightly
reworded example and commit. Added Link to PR. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a rustdoc example and Kunit test to the `ArrayLayout` struct's
`ArrayLayout::new()` function.
This patch depends on the first patch in this series in order for the
KUnit test to compile.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1131
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jimmy Ostler <jtostler1@gmail.com>
Link: https://lore.kernel.org/r/f1564da5bcaa6be87aee312767a1d1694a03d1b7.1734674670.git.jtostler1@gmail.com
[ Added periods to example comments. Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Change documentation imports to use `kernel::alloc::AllocError`,
because `KBox::new()` now returns that, instead of the `core`'s
`AllocError`.
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jimmy Ostler <jtostler1@gmail.com>
Link: https://lore.kernel.org/r/ec8badbe94c5e78f22315325a7f2ae96129d6a65.1734674670.git.jtostler1@gmail.com
[ Fixed formatting of imports (still unordered). Slightly reworded
commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Import the internal (`kernel::alloc`) version of `LayoutError` instead
of the `core::alloc` one.
In particular, this results in switching the type in the existing
`From<LayoutError> for Error` implementation.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jimmy Ostler <jtostler1@gmail.com>
Link: https://lore.kernel.org/r/fe58a02189e8804a9eabdd01cb1927d4c491d79c.1734674670.git.jtostler1@gmail.com
[ Reworded commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Remove `unwrap` in asserts and replace it with `Option::Some`
matching. By doing it this way, the examples are more
descriptive, so it disambiguates the return type of
the `get(...)` and `next(...)`, because the `unwrap(...)`
can also be called on `Result`.
Signed-off-by: Daniel Sedlak <daniel@sedlak.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123095033.41240-3-daniel@sedlak.dev
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We need the debugfs / driver-core fixes in here as well for testing and
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So far `DevresInner` is kept alive, even if `Devres` is dropped until
the devres callback is executed to avoid a WARN() when the action has
been released already.
With the introduction of devm_remove_action_nowarn() we can remove the
action in `Devres::drop`, handle the case where the action has been
released already and hence also free `DevresInner`.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250107122609.8135-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because the `macros` crate exposes procedural macros, it must be
compiled as a dynamic library (so it can be loaded by the compiler at
compile-time).
Before this change the resulting artifact was always named
`libmacros.so`, which works on hosts where this matches the naming
convention for dynamic libraries. However the proper name on macOS would
be `libmacros.dylib`.
This turns out to matter even when the dependency is passed with a path
(`--extern macros=path/to/libmacros.so` rather than `--extern macros`)
because rustc uses the file name to infer the type of the library (see
link). This is because there's no way to specify both the path to and
the type of the external library via CLI flags. The compiler could
speculatively parse the file to determine its type, but it does not do
so today.
This means that libraries that match neither rustc's naming convention
for static libraries nor the platform's naming convention for dynamic
libraries are *rejected*.
The only solution I've found is to follow the host platform's naming
convention. This patch does that by querying the compiler to determine
the appropriate name for the artifact. This allows the kernel to build
with CONFIG_RUST=y on macOS.
Link: https://github.com/rust-lang/rust/blob/d829780/compiler/rustc_metadata/src/locator.rs#L728-L752
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Co-developed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241216-b4-dylib-host-macos-v7-1-cfc507681447@gmail.com
[ Added `MAKEFLAGS=`s to avoid jobserver warnings. Removed space.
Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The sibling `build_assert!` is already in the prelude, it makes sense
that a "core"/"language" facility like this is part of the prelude and
users should not be defining their own one (thus there should be no risk
of future name collisions and we would want to be aware of them anyway).
Thus add `build_error!` into the prelude.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123222849.350287-3-ojeda@kernel.org
[ Applied the change to the new miscdevice cases. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Users were using the hidden exported `kernel::build_error` function
instead of the intended `kernel::build_error!` macro, e.g. see the
previous commit.
To force to use the macro, move it into the `build_assert` module,
thus making it a compilation error and avoiding a collision in the same
"namespace". Using the function now would require typing the module name
(which is hidden), not just a single character.
Now attempting to use the function will trigger this error with the
right suggestion by the compiler:
error[E0423]: expected function, found macro `kernel::build_error`
--> samples/rust/rust_minimal.rs:29:9
|
29 | kernel::build_error();
| ^^^^^^^^^^^^^^^^^^^ not a function
|
help: use `!` to invoke the macro
|
29 | kernel::build_error!();
| +
An alternative would be using an alias, but it would be more complex
and moving it into the module seems right since it belongs there and
reduces the amount of code at the crate root.
Keep the `#[doc(hidden)]` inside `build_assert` in case the module is
not hidden in the future.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123222849.350287-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Code and some examples were using the function, rather than the macro. The
macro is what is documented.
Thus move users to the macro.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123222849.350287-1-ojeda@kernel.org
[ Applied the change to the new miscdevice cases. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Running Clippy for `rusttest` code is useful to catch issues there too,
even if the code is not as critical. In the future, this code may also
run in kernelspace and could be copy-pasted. Thus it is useful to keep
it under the same standards. For instance, it will now make us add
`// SAFETY` comments.
It also makes everything more consistent.
Thus clean the few issues spotted by Clippy and start running it.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123180639.260191-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `RegistrationOps` trait holds some obligations to the caller and
implementers. While being documented, the trait and the corresponding
functions haven't been marked as unsafe.
Hence, markt the trait and functions unsafe and add the corresponding
safety comments.
This patch does not include any fuctional changes.
Reported-by: Gary Guo <gary@garyguo.net>
Closes: https://lore.kernel.org/rust-for-linux/20241224195821.3b43302b.gary@garyguo.net/
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250103164655.96590-4-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module entry of `io` falsely ended up in the "use" block instead of
the "mod" block, hence move it to its correct location.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250103164655.96590-3-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Suppress a corner case spurious flush dependency warning.
- Two trivial changes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ3hmjA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGUrkAP90cajNtGbtFR1J61N4dTSfjBz8L7oQ6GLLyjCB
MDxvpQD/ViVVpHBl9/jfObk//p6YMBTBD2Zp/aBc3mkKOVhfqws=
=eUNO
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.13-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Suppress a corner case spurious flush dependency warning
- Two trivial changes
* tag 'wq-for-6.13-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: add printf attribute to __alloc_workqueue()
workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker
rust: add safety comment in workqueue traits
- Use swap() macro in the ww_mutex test.
- Minor fixes and documentation for lockdep configs on internal data structure sizes.
- Some "-Wunused-function" warning fixes for Clang.
Rust locking changes for v6.14:
- Add Rust locking files into LOCKING PRIMITIVES maintainer entry.
- Add `Lock<(), ..>::from_raw()` function to support abstraction on low level locking.
- Expose `Guard::new()` for public usage and add type alias for spinlock and mutex guards.
- Add lockdep checking when creating a new lock `Guard`.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEj5IosQTPz8XU1wRHSXnow7UH+rgFAmdl/LoACgkQSXnow7UH
+rhNrAf/epZAkkTmFgSqdx0ZNtKUA14Hqp9ie7SJylU6B9dfXmvZzaNBlowk5Edq
yGGJQYuzuT+PFYZkNEuSZYcrqUq+b4s8MyF/8h3+lyZT6p1Jhapvq16id5yA1u0l
MxMqAZC1D1ruDev2H8IxLlhHlDsSYS0erVNB2ZTFJwL0rZNyUXMZ4Y/o972GjAPt
8g9NlPB3ZTCVmyVtwy7rCexSuVTGDE3BRL9/W9q8eMZNnHq46xDsHRrn9NO4cDmv
FogniH9xjFYetZMilYkpHwygAMX1P2t6x29Q+u464bStIWIOjkthYjkoePNXwZQd
XgvN37j508VHLJ3sod38+IpnfhlZHA==
=IJvk
-----END PGP SIGNATURE-----
Merge tag 'lockdep-for-tip.20241220' of git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux into locking/core
Lockdep changes for v6.14:
- Use swap() macro in the ww_mutex test.
- Minor fixes and documentation for lockdep configs on internal data structure sizes.
- Some "-Wunused-function" warning fixes for Clang.
Rust locking changes for v6.14:
- Add Rust locking files into LOCKING PRIMITIVES maintainer entry.
- Add `Lock<(), ..>::from_raw()` function to support abstraction on low level locking.
- Expose `Guard::new()` for public usage and add type alias for spinlock and mutex guards.
- Add lockdep checking when creating a new lock `Guard`.
Implement the basic platform bus abstractions required to write a basic
platform driver. This includes the following data structures:
The `platform::Driver` trait represents the interface to the driver and
provides `platform::Driver::probe` for the driver to implement.
The `platform::Device` abstraction represents a `struct platform_device`.
In order to provide the platform bus specific parts to a generic
`driver::Registration` the `driver::RegistrationOps` trait is implemented
by `platform::Adapter`.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-15-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to not duplicate code in bus specific implementations (e.g.
platform), implement a generic `driver::Adapter` to represent the
connection of matched drivers and devices.
Bus specific `Adapter` implementations can simply implement this trait
to inherit generic functionality, such as matching OF or ACPI device IDs
and ID table entries.
Suggested-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-14-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`of::DeviceId` is an abstraction around `struct of_device_id`.
This is used by subsequent patches, in particular the platform bus
abstractions, to create OF device ID tables.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-13-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement `pci::Bar`, `pci::Device::iomap_region` and
`pci::Device::iomap_region_sized` to allow for I/O mappings of PCI BARs.
To ensure that a `pci::Bar`, and hence the I/O memory mapping, can't
out-live the PCI device, the `pci::Bar` type is always embedded into a
`Devres` container, such that the `pci::Bar` is revoked once the device
is unbound and hence the I/O mapped memory is unmapped.
A `pci::Bar` can be requested with (`pci::Device::iomap_region_sized`) or
without (`pci::Device::iomap_region`) a const generic representing the
minimal requested size of the I/O mapped memory region. In case of the
latter only runtime checked I/O reads / writes are possible.
Co-developed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-11-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the basic PCI abstractions required to write a basic PCI
driver. This includes the following data structures:
The `pci::Driver` trait represents the interface to the driver and
provides `pci::Driver::probe` for the driver to implement.
The `pci::Device` abstraction represents a `struct pci_dev` and provides
abstractions for common functions, such as `pci::Device::set_master`.
In order to provide the PCI specific parts to a generic
`driver::Registration` the `driver::RegistrationOps` trait is implemented
by `pci::Adapter`.
`pci::DeviceId` implements PCI device IDs based on the generic
`device_id::RawDevceId` abstraction.
Co-developed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-10-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a Rust abstraction for the kernel's devres (device resource
management) implementation.
The Devres type acts as a container to manage the lifetime and
accessibility of device bound resources. Therefore it registers a
devres callback and revokes access to the resource on invocation.
Users of the Devres abstraction can simply free the corresponding
resources in their Drop implementation, which is invoked when either the
Devres instance goes out of scope or the devres callback leads to the
resource being revoked, which implies a call to drop_in_place().
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-9-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revocable allows access to objects to be safely revoked at run time.
This is useful, for example, for resources allocated during device probe;
when the device is removed, the driver should stop accessing the device
resources even if another state is kept in memory due to existing
references (i.e., device context data is ref-counted and has a non-zero
refcount after removal of the device).
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-7-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Analogous to `Opaque::new` add `Opaque::pin_init`, which instead of a
value `T` takes a `PinInit<T>` and returns a `PinInit<Opaque<T>>`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-6-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most subsystems use some kind of ID to match devices and drivers. Hence,
we have to provide Rust drivers an abstraction to register an ID table
for the driver to match.
Generally, those IDs are subsystem specific and hence need to be
implemented by the corresponding subsystem. However, the `IdArray`,
`IdTable` and `RawDeviceId` types provide a generalized implementation
that makes the life of subsystems easier to do so.
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-4-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the generic `Registration` type and the `RegistrationOps`
trait.
The `Registration` structure is the common type that represents a driver
registration and is typically bound to the lifetime of a module. However,
it doesn't implement actual calls to the kernel's driver core to register
drivers itself.
Instead the `RegistrationOps` trait is provided to subsystems, which have
to implement `RegistrationOps::register` and
`RegistrationOps::unregister`. Subsystems have to provide an
implementation for both of those methods where the subsystem specific
variants to register / unregister a driver have to implemented.
For instance, the PCI subsystem would call __pci_register_driver() from
`RegistrationOps::register` and pci_unregister_driver() from
`DrvierOps::unregister`.
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-3-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to access static metadata of a Rust kernel module, add the
`ModuleMetadata` trait.
In particular, this trait provides the name of a Rust kernel module as
specified by the `module!` macro.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we've exposed Lock::from_raw() and Guard::new() publically, we
want to be able to make sure that we assert that a lock is actually held
when constructing a Guard for it to handle instances of unsafe
Guard::new() calls outside of our lock module.
Hence add a new method assert_is_held() to Backend, which uses lockdep
to check whether or not a lock has been acquired. When lockdep is
disabled, this has no overhead.
[Boqun: Resolve the conflicts with exposing Guard::new(), reword the
commit log a bit and format "unsafe { <statement>; }" into "unsafe {
<statement> }" for the consistency. ]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241125204139.656801-1-lyude@redhat.com
A simple helper alias for code that needs to deal with Guard types returned
from SpinLocks.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241120222742.2490495-3-lyude@redhat.com
A simple helper alias for code that needs to deal with Guard types returned
from Mutexes.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241120222742.2490495-2-lyude@redhat.com
Since we added a `Lock::from_raw()` function previously, it makes sense
to also introduce an interface for creating a `Guard` from a reference
to a `Lock` for instances where we've derived the `Lock` from a raw
pointer and know that the lock is already acquired, there are such
usages in KMS API.
[Boqun: Add backquotes to type names, reformat the commit log, reword a
bit on the usage of KMS API]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Filipe Xavier <felipe_life@live.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241119231146.2298971-3-lyude@redhat.com
The KMS bindings [1] have a few bindings that require manually acquiring
specific locks before calling certain functions. At the moment though,
the only way of acquiring these locks in bindings is to simply call the
C locking functions directly - since said locks are not initialized on
the Rust side of things.
However - if we add `#[repr(C)]` to `Lock<(), B>`, then given `()` is a
ZST - `Lock<(), B>` becomes equivalent in data layout to its inner
`B::State` type. Since locks in C don't have data explicitly associated
with them anyway, we can take advantage of this to add a
`Lock::from_raw()` function that can translate a raw pointer to
`B::State` into its proper `Lock<(), B>` equivalent. This lets us simply
acquire a reference to the lock in question and work with it like it was
initialized on the Rust side of things, allowing us to use less unsafe
code to implement bindings with lock requirements.
[Boqun: Use "Link:" instead of a URL and format the commit log]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patchwork.freedesktop.org/series/131522/ [1]
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241119231146.2298971-2-lyude@redhat.com
Align bullet points and improve indentation in the `Invariants` section
of the `GenDisk` struct documentation for better readability.
[ Yutaro is also working on implementing the lint we suggested to catch
this sort of issue in upstream Rust:
https://github.com/rust-lang/rust-clippy/issues/13601https://github.com/rust-lang/rust-clippy/pull/13711
Thanks a lot! - Miguel ]
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/ZxkcU5yTFCagg_lX@ohnotp
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Ensure consistency between `Debug` and `Display` for `Box` by
updating `Debug` to match the new `Display` style.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Guangbo Cui <2407018371@qq.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/tencent_1FC0BC283DA65DD81A8A14EEF25563934E05@qq.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently `impl Display` is missing for `Box<T, A>`, as a result,
things like using `Box<..>` directly as an operand in `pr_info!()`
are impossible, which is less ergonomic compared to `Box` in Rust
std.
Therefore add `impl Display` for `Box`.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1126
Signed-off-by: Guangbo Cui <2407018371@qq.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/tencent_2AD25C6A6898D3A598CBA54BB6AF59BB900A@qq.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a comment explaining the relevant semantics of `PhantomData`. This
should help future readers who may, as I did, assume that this field is
redundant at first glance.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241107-simplify-arc-v2-1-7256e638aac1@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Having the Rust doctests enabled these workqueue tests are built but not
executed as the final callers of the print_*() functions are missing.
Add them.
The result is
# rust_doctest_kernel_workqueue_rs_0.location: rust/kernel/workqueue.rs:35
rust_doctests_kernel: The value is: 42
ok 94 rust_doctest_kernel_workqueue_rs_0
# rust_doctest_kernel_workqueue_rs_3.location: rust/kernel/workqueue.rs:78
rust_doctests_kernel: The value is: 24
rust_doctests_kernel: The second value is: 42
ok 97 rust_doctest_kernel_workqueue_rs_3
Without this change the "The value ..." outputs are not there meaning
that this test code is not run.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/cb953202-0dbe-4127-8a8e-6a75258c2116@gmail.com
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Modify the from_errno function to use try_from_errno to
reduce code duplication while still maintaining all existing
behavior and error handling and also reduces unsafe code.
Link: https://github.com/Rust-for-Linux/linux/issues/1125
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: Guilherme Augusto Martins da Silva <guilhermev2huehue@gmail.com>
Signed-off-by: Guilherme Augusto Martins da Silva <guilhermev2huehue@gmail.com>
Signed-off-by: Daniel Sedlak <daniel@sedlak.dev>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20241207112445.55502-1-daniel@sedlak.dev
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Similar to the use of $crate::Module, ThisModule should be referred to as
$crate::ThisModule in the macro evaluation. The reason the macro previously
did not cause any errors is because all the users of the macro would use
kernel::prelude::*, bringing ThisModule into scope.
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20241214194242.19505-1-sergeantsagara@protonmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The alias symbol name was renamed. Adjust module_phy_driver macro to
create the proper symbol name to fix module autoloading.
Fixes: 054a9cd395 ("modpost: rename alias symbol for MODULE_DEVICE_TABLE()")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20241212130015.238863-1-fujita.tomonori@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With `long` mapped to `isize`, `size_t`/`__kernel_size_t` mapped to
`usize` and `char` mapped to `u8`, many of the existing casts are no
longer necessary.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240913213041.395655-6-gary@garyguo.net
[ Moved `uaccess` changes to the previous commit, since they were
irrefutable patterns that Rust >= 1.82.0 warns about. Removed a
couple casts that now use `c""` literals. Rebased on top of
`rust-next`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The following FFI types are replaced compared to `core::ffi`:
1. `char` type is now always mapped to `u8`, since kernel uses
`-funsigned-char` on the C code. `core::ffi` maps it to platform
default ABI, which can be either signed or unsigned.
2. `long` is now always mapped to `isize`. It's very common in the
kernel to use `long` to represent a pointer-sized integer, and in
fact `intptr_t` is a typedef of `long` in the kernel. Enforce this
mapping rather than mapping to `i32/i64` depending on platform can
save us a lot of unnecessary casts.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240913213041.395655-5-gary@garyguo.net
[ Moved `uaccess` changes from the next commit, since they were
irrefutable patterns that Rust >= 1.82.0 warns about. Reworded
slightly and reformatted a few documentation comments. Rebased on
top of `rust-next`. Added the removal of two casts to avoid Clippy
warnings. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In the last kernel cycle we migrated most of the `core::ffi` cases in
commit d072acda48 ("rust: use custom FFI integer types"):
Currently FFI integer types are defined in libcore. This commit
creates the `ffi` crate and asks bindgen to use that crate for FFI
integer types instead of `core::ffi`.
This commit is preparatory and no type changes are made in this
commit yet.
Finish now the few remaining/new cases so that we perform the actual
remapping in the next commit as planned.
Acked-by: Jocelyn Falempe <jfalempe@redhat.com> # drm
Link: https://lore.kernel.org/rust-for-linux/CANiq72m_rg42SvZK=bF2f0yEoBLVA33UBhiAsv8THhVu=G2dPA@mail.gmail.com/
Link: https://lore.kernel.org/all/cc9253fa-9d5f-460b-9841-94948fb6580c@redhat.com/
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
File descriptors should generally provide a fops->show_fdinfo() hook for
debugging purposes. Thus, add such a hook to the miscdevice
abstractions.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241203-miscdevice-showfdinfo-v1-1-7e990732d430@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are situations where a pointer to a `struct device` will become
necessary (e.g. for calling into dev_*() functions). This accessor
allows callers to pull this out from the `struct miscdevice`.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241210-miscdevice-file-param-v3-3-b2a79b666dc5@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Providing access to the underlying `struct miscdevice` is useful for
various reasons. For example, this allows you access the miscdevice's
internal `struct device` for use with the `dev_*` printing macros.
Note that since the underlying `struct miscdevice` could get freed at
any point after the fops->open() call (if misc_deregister is called),
only the open call is given access to it. To use `dev_*` printing macros
from other fops hooks, take a refcount on `miscdevice->this_device` to
keep it alive. See the linked thread for further discussion on the
lifetime of `struct miscdevice`.
Link: https://lore.kernel.org/r/2024120951-botanist-exhale-4845@gregkh
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241210-miscdevice-file-param-v3-2-b2a79b666dc5@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows fops to access information about the underlying struct file
for the miscdevice. For example, the Binder driver needs to inspect the
O_NONBLOCK flag inside the fops->ioctl() hook.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241210-miscdevice-file-param-v3-1-b2a79b666dc5@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each `bindgen` release may upgrade the list of Rust targets. For instance,
currently, in their master branch [1], the latest ones are:
Nightly => {
vectorcall_abi: #124485,
ptr_metadata: #81513,
layout_for_ptr: #69835,
},
Stable_1_77(77) => { offset_of: #106655 },
Stable_1_73(73) => { thiscall_abi: #42202 },
Stable_1_71(71) => { c_unwind_abi: #106075 },
Stable_1_68(68) => { abi_efiapi: #105795 },
By default, the highest stable release in their list is used, and users
are expected to set one if they need to support older Rust versions
(e.g. see [2]).
Thus, over time, new Rust features are used by default, and at some
point, it is likely that `bindgen` will emit Rust code that requires a
Rust version higher than our minimum (or perhaps enabling an unstable
feature). Currently, there is no problem because the maximum they have,
as seen above, is Rust 1.77.0, and our current minimum is Rust 1.78.0.
Therefore, set a Rust target explicitly now to prevent going forward in
time too much and thus getting potential build failures at some point.
Since we also support a minimum `bindgen` version, and since `bindgen`
does not support passing unknown Rust target versions, we need to use
the list of our minimum `bindgen` version, rather than the latest. So,
since `bindgen` 0.65.1 had this list [3], we need to use Rust 1.68.0:
/// Rust stable 1.64
/// * `core_ffi_c` ([Tracking issue](https://github.com/rust-lang/rust/issues/94501))
=> Stable_1_64 => 1.64;
/// Rust stable 1.68
/// * `abi_efiapi` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/65815))
=> Stable_1_68 => 1.68;
/// Nightly rust
/// * `thiscall` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/42202))
/// * `vectorcall` calling convention (no tracking issue)
/// * `c_unwind` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/74990))
=> Nightly => nightly;
...
/// Latest stable release of Rust
pub const LATEST_STABLE_RUST: RustTarget = RustTarget::Stable_1_68;
Thus add the `--rust-target 1.68` parameter. Add a comment as well
explaining this.
An alternative would be to use the currently running (i.e. actual) `rustc`
and `bindgen` versions to pick a "better" Rust target version. However,
that would introduce more moving parts depending on the user setup and
is also more complex to implement.
Starting with `bindgen` 0.71.0 [4], we will be able to set any future
Rust version instead, i.e. we will be able to set here our minimum
supported Rust version. Christian implemented it [5] after seeing this
patch. Thanks!
Cc: Christian Poveda <git@pvdrz.com>
Cc: Emilio Cobos Álvarez <emilio@crisal.io>
Cc: stable@vger.kernel.org # needed for 6.12.y; unneeded for 6.6.y; do not apply to 6.1.y
Fixes: c844fa64a2 ("rust: start supporting several `bindgen` versions")
Link: 21c60f473f/bindgen/features.rs (L97-L105) [1]
Link: https://github.com/rust-lang/rust-bindgen/issues/2960 [2]
Link: 7d243056d3/bindgen/features.rs (L131-L150) [3]
Link: https://github.com/rust-lang/rust-bindgen/blob/main/CHANGELOG.md#0710-2024-12-06 [4]
Link: https://github.com/rust-lang/rust-bindgen/pull/2993 [5]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123180323.255997-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add missing safety comments for the implementation of the unsafe traits
WorkItemPointer and RawWorkItem for Arc<T> in workqueue.rs
Link: https://github.com/Rust-for-Linux/linux/issues/351.
Co-developed-by: Vangelis Mamalakis <mamalakis@google.com>
Signed-off-by: Vangelis Mamalakis <mamalakis@google.com>
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Konstantin Andrikopoulos <kernel@mandragore.io>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6cbB
-----END PGP SIGNATURE-----
Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
-----BEGIN PGP SIGNATURE-----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=GDKD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
Currently, Kbuild always operates in the output directory of the kernel,
even when building external modules. This increases the risk of external
module Makefiles attempting to write to the kernel directory.
This commit switches the working directory to the external module
directory, allowing the removal of the $(KBUILD_EXTMOD)/ prefix from
some build artifacts.
The command for building external modules maintains backward
compatibility, but Makefiles that rely on working in the kernel
directory may break. In such cases, $(objtree) and $(srctree) should
be used to refer to the output and source directories of the kernel.
The appearance of the build log will change as follows:
[Before]
$ make -C /path/to/my/linux M=/path/to/my/externel/module
make: Entering directory '/path/to/my/linux'
CC [M] /path/to/my/externel/module/helloworld.o
MODPOST /path/to/my/externel/module/Module.symvers
CC [M] /path/to/my/externel/module/helloworld.mod.o
CC [M] /path/to/my/externel/module/.module-common.o
LD [M] /path/to/my/externel/module/helloworld.ko
make: Leaving directory '/path/to/my/linux'
[After]
$ make -C /path/to/my/linux M=/path/to/my/externel/module
make: Entering directory '/path/to/my/linux'
make[1]: Entering directory '/path/to/my/externel/module'
CC [M] helloworld.o
MODPOST Module.symvers
CC [M] helloworld.mod.o
CC [M] .module-common.o
LD [M] helloworld.ko
make[1]: Leaving directory '/path/to/my/externel/module'
make: Leaving directory '/path/to/my/linux'
Printing "Entering directory" twice is cumbersome. This will be
addressed later.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
When I merged the rust 'use' imports, I didn't realize that there's
an offical preferred idiomatic format - so while it all worked fine,
it doesn't match what 'make rustfmt' wants to make it.
Fix it up appropriately.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a frequent
source of review comments, thus having the compiler guide new
developers on where they are expected (and where not) is very nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up locally
ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance, our
first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is the
support to write custom types that can be used as 'self', i.e. as
receivers, since the kernel needs to write types such as 'Arc' that
common userspace Rust would not. 'arbitrary_self_types' has been
accepted to become stable, and this is one of the steps required to
get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize' instead
of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some distributions
backported the fix (e.g. Debian -- thanks!). All major distributions
we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the extension
traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type 'T'
that is also generic over an allocator and considers the kernel's GFP
flags) and its shorthand aliases '{K,V,KV}Box'. Add 'ArrayLayout'
type. Add 'Vec' (a contiguous growable array type) and its shorthand
aliases '{K,V,KV}Vec', including iterator support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=Kn7b
-----END PGP SIGNATURE-----
Merge tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a
frequent source of review comments, thus having the compiler guide
new developers on where they are expected (and where not) is very
nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up
locally ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance,
our first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is
the support to write custom types that can be used as 'self', i.e.
as receivers, since the kernel needs to write types such as 'Arc'
that common userspace Rust would not. 'arbitrary_self_types' has
been accepted to become stable, and this is one of the steps
required to get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize'
instead of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some
distributions backported the fix (e.g. Debian -- thanks!). All
major distributions we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the
extension traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type
'T' that is also generic over an allocator and considers the
kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add
'ArrayLayout' type. Add 'Vec' (a contiguous growable array type)
and its shorthand aliases '{K,V,KV}Vec', including iterator
support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes"
* tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits)
rust: alloc: Fix `ArrayLayout` allocations
docs: rust: remove spurious item in `expect` list
rust: allow `clippy::needless_lifetimes`
rust: warn on bindgen < 0.69.5 and libclang >= 19.1
rust: use custom FFI integer types
rust: map `__kernel_size_t` and friends also to usize/isize
rust: fix size_t in bindgen prototypes of C builtins
rust: sync: add global lock support
rust: macros: enable the rest of the tests
rust: macros: enable paste! use from macro_rules!
rust: enable macros::module! tests
rust: kbuild: expand rusttest target for macros
rust: types: extend `Opaque` documentation
rust: block: fix formatting of `kernel::block::mq::request` module
rust: macros: fix documentation of the paste! macro
rust: kernel: fix THIS_MODULE header path in ThisModule doc comment
rust: page: add Rust version of PAGE_ALIGN
rust: helpers: remove unnecessary header includes
rust: exports: improve grammar in commentary
drm/panic: allow verbose version check
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcWKgAKCRCRxhvAZXjc
osPAAP9bLzOPIF51IgP9mQTBlKKrpCWCMQVss5xRDseyNEfCEQD/fR9TSSnX9Suw
iad9oBkxkzCjyxWIH46rvbdnc38lRwo=
=aawA
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.rust.pid_namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pid_namespace rust bindings from Christian Brauner:
"This contains my Rust bindings for pid namespaces needed for various
rust drivers. Here's a description of the basic C semantics and how
they are mapped to Rust.
The pid namespace of a task doesn't ever change once the task is
alive. A unshare(CLONE_NEWPID) or setns(fd_pidns/pidfd, CLONE_NEWPID)
will not have an effect on the calling task's pid namespace. It will
only effect the pid namespace of children created by the calling task.
This invariant guarantees that after having acquired a reference to a
task's pid namespace it will remain unchanged.
When a task has exited and been reaped release_task() will be called.
This will set the pid namespace of the task to NULL. So retrieving the
pid namespace of a task that is dead will return NULL. Note, that
neither holding the RCU lock nor holding a reference count to the task
will prevent release_task() from being called.
In order to retrieve the pid namespace of a task the
task_active_pid_ns() function can be used. There are two cases to
consider:
(1) retrieving the pid namespace of the current task
(2) retrieving the pid namespace of a non-current task
From system call context retrieving the pid namespace for case (1) is
always safe and requires neither RCU locking nor a reference count to
be held. Retrieving the pid namespace after release_task() for current
will return NULL but no codepath like that is exposed to Rust.
Retrieving the pid namespace from system call context for (2) requires
RCU protection. Accessing a pid namespace outside of RCU protection
requires a reference count that must've been acquired while holding
the RCU lock. Note that accessing a non-current task means NULL can be
returned as the non-current task could have already passed through
release_task().
To retrieve (1) the current_pid_ns!() macro should be used. It ensures
that the returned pid namespace cannot outlive the calling scope. The
associated current_pid_ns() function should not be called directly as
it could be abused to created an unbounded lifetime for the pid
namespace. The current_pid_ns!() macro allows Rust to handle the
common case of accessing current's pid namespace without RCU
protection and without having to acquire a reference count.
For (2) the task_get_pid_ns() method must be used. This will always
acquire a reference on the pid namespace and will return an Option to
force the caller to explicitly handle the case where pid namespace is
None. Something that tends to be forgotten when doing the equivalent
operation in C.
Missing RCU primitives make it difficult to perform operations that
are otherwise safe without holding a reference count as long as RCU
protection is guaranteed. But it is not important currently. But we do
want it in the future.
Note that for (2) the required RCU protection around calling
task_active_pid_ns() synchronizes against putting the last reference
of the associated struct pid of task->thread_pid. The struct pid
stored in that field is used to retrieve the pid namespace of the
caller. When release_task() is called task->thread_pid will be NULLed
and put_pid() on said struct pid will be delayed in free_pid() via
call_rcu() allowing everyone with an RCU protected access to the
struct pid acquired from task->thread_pid to finish"
* tag 'vfs-6.13.rust.pid_namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: add PidNamespace
- Allow Rust code to have trace events
Trace events is a popular way to debug what is happening inside the kernel
or just to find out what is happening. Rust code is being added to the
Linux kernel but it currently does not support the tracing infrastructure.
Add support of trace events inside Rust code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0DjqhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrLlAPsF6t/c1nHSGTKDv9FJDJe4JHdP7e+U
7X0S8BmSTKFNAQD+K2TEd0bjVP7ug8dQZBT+fveiFr+ARYxAwJ3JnEFjUwg=
=Ab+T
-----END PGP SIGNATURE-----
Merge tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rust trace event support from Steven Rostedt:
"Allow Rust code to have trace events
Trace events is a popular way to debug what is happening inside the
kernel or just to find out what is happening. Rust code is being added
to the Linux kernel but it currently does not support the tracing
infrastructure. Add support of trace events inside Rust code"
* tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rust: jump_label: skip formatting generated file
jump_label: rust: pass a mut ptr to `static_key_count`
samples: rust: fix `rust_print` build making it a combined module
rust: add arch_static_branch
jump_label: adjust inline asm to be consistent
rust: samples: add tracepoint to Rust sample
rust: add tracepoint support
rust: add static_branch_unlikely for static_key_false
We were accidentally allocating a layout for the *square* of the object
size due to a variable shadowing mishap.
Fixes memory bloat and page allocation failures in drm/asahi.
Reported-by: Janne Grunau <j@jannau.net>
Fixes: 9e7bbfa182 ("rust: alloc: introduce `ArrayLayout`")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20241123-rust-fix-arraylayout-v1-1-197e64c95bd4@asahilina.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
After a source tree build of the kernel, and having used the `RSCPP`
rule, running `rustfmt` fails with:
error: macros that expand to items must be delimited with braces or followed by a semicolon
--> rust/kernel/arch_static_branch_asm.rs:1:27
|
1 | ...ls!("1: jmp " ... ".popsection \n\t")
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
help: change the delimiters to curly braces
|
1 | ::kernel::concat_literals!{"1: jmp " ... ".popsection \n\t"}
| ~ ~
help: add a semicolon
|
1 | ::kernel::concat_literals!("1: jmp " ... ".popsection \n\t");
| +
This file is not meant to be formatted nor works on its own since it is
meant to be textually included.
Thus skip formatting it by prefixing its name with `generated_`.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/20241120175916.58860-1-ojeda@kernel.org
Fixes: 169484ab66 ("rust: add arch_static_branch")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When building the rust_print sample with CONFIG_JUMP_LABEL=n, the Rust
static key support falls back to using static_key_count. This function
accepts a mutable pointer to the `struct static_key`, but the Rust
abstractions are incorrectly passing a const pointer.
This means that builds using CONFIG_JUMP_LABEL=n and SAMPLE_RUST_PRINT=y
fail with the following error message:
error[E0308]: mismatched types
--> <root>/samples/rust/rust_print_main.rs:87:5
|
87 | / kernel::declare_trace! {
88 | | /// # Safety
89 | | ///
90 | | /// Always safe to call.
91 | | unsafe fn rust_sample_loaded(magic: c_int);
92 | | }
| | ^
| | |
| |_____types differ in mutability
| arguments to this function are incorrect
|
= note: expected raw pointer `*mut kernel::bindings::static_key`
found raw pointer `*const kernel::bindings::static_key`
note: function defined here
--> <root>/rust/bindings/bindings_helpers_generated.rs:33:12
|
33 | pub fn static_key_count(key: *mut static_key) -> c_int;
| ^^^^^^^^^^^^^^^^
To fix this, insert a pointer cast so that the pointer is mutable.
Link: https://lore.kernel.org/20241118202727.73646-1-aliceryhl@google.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411181440.qEdcuyh6-lkp@intel.com/
Fixes: 169484ab66 ("rust: add arch_static_branch")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcT8AAKCRCRxhvAZXjc
or+CAQDb2JkNOVrugXw++kgvHrLBY+7rCzyA+sJhiZu7C7uQogEApQgGP1kjmpi0
f1wR6xomb9AmQNd991F0VWXCPBTUsAk=
=RQnY
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.rust.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rust file abstractions from Christian Brauner:
"This contains the file abstractions needed by the Rust implementation
of the Binder driver and other parts of the kernel.
Let's treat this as a first attempt at getting something working but I
do expect the actual interfaces to change significantly over time.
Simply because we are still figuring out what actually works. But
there's no point in further theorizing. Let's see how it holds up with
actual users"
* tag 'vfs-6.13.rust.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: task: adjust safety comments in Task methods
rust: add seqfile abstraction
rust: file: add abstraction for `poll_table`
rust: file: add `Kuid` wrapper
rust: file: add `FileDescriptorReservation`
rust: security: add abstraction for secctx
rust: cred: add Rust abstraction for `struct cred`
rust: file: add Rust abstraction for `struct file`
rust: task: add `Task::current_raw`
rust: types: add `NotThreadSafe`
When PREEMPT_RT=y, spin locks are mapped to rt_mutex types, so using
spinlock_check() + __raw_spin_lock_init() to initialize spin locks is
incorrect, and would cause build errors.
Introduce __spin_lock_init() to initialize a spin lock with lockdep
rquired information for PREEMPT_RT builds, and use it in the Rust
helper.
Fixes: d2d6422f8b ("x86: Allow to enable PREEMPT_RT.")
Closes: https://lore.kernel.org/oe-kbuild-all/202409251238.vetlgXE9-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241107163223.2092690-2-ezulian@redhat.com
Currently FFI integer types are defined in libcore. This commit creates
the `ffi` crate and asks bindgen to use that crate for FFI integer types
instead of `core::ffi`.
This commit is preparatory and no type changes are made in this commit
yet.
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240913213041.395655-4-gary@garyguo.net
[ Added `rustdoc`, `rusttest` and KUnit tests support. Rebased on top of
`rust-next` (e.g. migrated more `core::ffi` cases). Reworded crate
docs slightly and formatted. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently bindgen has special logic to recognise `size_t` and `ssize_t`
and map them to Rust `usize` and `isize`. Similarly, `ptrdiff_t` is
mapped to `isize`.
However this falls short for `__kernel_size_t`, `__kernel_ssize_t` and
`__kernel_ptrdiff_t`. To ensure that they are mapped to usize/isize
rather than 32/64 integers depending on platform, blocklist them in
bindgen parameters and manually provide their definition.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20240913213041.395655-3-gary@garyguo.net
[ Formatted comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Without `-fno-builtin`, for functions like memcpy/memmove (and many
others), bindgen seems to be using the clang-provided prototype. This
prototype is ABI-wise compatible, but the issue is that it does not have
the same information as the source code w.r.t. typedefs.
For example, bindgen generates the following:
extern "C" {
pub fn strlen(s: *const core::ffi::c_char) -> core::ffi::c_ulong;
}
note that the return type is `c_ulong` (i.e. unsigned long), despite the
size_t-is-usize behavior (this is default, and we have not opted out
from it using --no-size_t-is-usize).
Similarly, memchr's size argument should be of type `__kernel_size_t`,
but bindgen generates `c_ulong` directly.
We want to ensure any `size_t` is translated to Rust `usize` so that we
can avoid having them be different type on 32-bit and 64-bit
architectures, and hence would require a lot of excessive type casts
when calling FFI functions.
I found that this bindgen behavior (which probably is caused by
libclang) can be disabled by `-fno-builtin`. Using the flag for compiled
code can result in less optimisation because compiler cannot assume
about their properties anymore, but this should not affect bindgen.
[ Trevor asked: "I wonder how reliable this behavior is. Maybe bindgen
could do a better job controlling this, is there an open issue?".
Gary replied: ..."apparently this is indeed the suggested approach in
https://github.com/rust-lang/rust-bindgen/issues/1770". - Miguel ]
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240913213041.395655-2-gary@garyguo.net
[ Formatted comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add support for creating global variables that are wrapped in a mutex or
spinlock.
The implementation here is intended to replace the global mutex
workaround found in the Rust Binder RFC [1]. In both cases, the global
lock must be initialized before first use. The macro is unsafe to use
for the same reason.
The separate initialization step is required because it is tricky to
access the value of __ARCH_SPIN_LOCK_UNLOCKED from Rust. Doing so will
require changes to the C side. That change will happen as a follow-up to
this patch.
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-2-08ba9197f637@google.com/#Z31drivers:android:context.rs [1]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241023-static-mutex-v6-1-d7efdadcc84f@google.com
[ Simplified a few intra-doc links. Formatted a few comments. Reworded
title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `dev_*` print macros for `device::Device`.
They behave like the macros with the same names in C, i.e., they print
messages to the kernel ring buffer with the given level, prefixing the
messages with corresponding device information.
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241022213221.2383-9-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows modules to be initialised in-place in pinned memory, which
enables the usage of pinned types (e.g., mutexes, spinlocks, driver
registrations, etc.) in modules without any extra allocations.
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20241022213221.2383-3-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To allow the Rust implementation of static_key_false to use runtime code
patching instead of the generic implementation, pull in the relevant
inline assembly from the jump_label.h header by running the C
preprocessor on a .rs.S file. Build rules are added for .rs.S files.
Since the relevant inline asm has been adjusted to export the inline asm
via the ARCH_STATIC_BRANCH_ASM macro in a consistent way, the Rust side
does not need architecture specific code to pull in the asm.
It is not possible to use the existing C implementation of
arch_static_branch via a Rust helper because it passes the argument
`key` to inline assembly as an 'i' parameter. Any attempt to add a C
helper for this function will fail to compile because the value of `key`
must be known at compile-time.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: " =?utf-8?q?Bj=C3=B6rn_Roy_Baron?= " <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Link: https://lore.kernel.org/20241030-tracepoint-v12-5-eec7f0f8ad22@google.com
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This updates the Rust printing sample to invoke a tracepoint. This
ensures that we have a user in-tree from the get-go even though the
patch is being merged before its real user.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: " =?utf-8?q?Bj=C3=B6rn_Roy_Baron?= " <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Link: https://lore.kernel.org/20241030-tracepoint-v12-3-eec7f0f8ad22@google.com
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make it possible to have Rust code call into tracepoints defined by C
code. It is still required that the tracepoint is declared in a C
header, and that this header is included in the input to bindgen.
Instead of calling __DO_TRACE directly, the exported rust_do_trace_
function calls an inline helper function. This is because the `cond`
argument does not exist at the callsite of DEFINE_RUST_DO_TRACE.
__DECLARE_TRACE always emits an inline static and an extern declaration
that is only used when CREATE_RUST_TRACE_POINTS is set. These should not
end up in the final binary so it is not a problem that they sometimes
are emitted without a user.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: " =?utf-8?q?Bj=C3=B6rn_Roy_Baron?= " <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Link: https://lore.kernel.org/20241030-tracepoint-v12-2-eec7f0f8ad22@google.com
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add just enough support for static key so that we can use it from
tracepoints. Tracepoints rely on `static_branch_unlikely` with a `struct
static_key_false`, so we add the same functionality to Rust.
This patch only provides a generic implementation without code patching
(matching the one used when CONFIG_JUMP_LABEL is disabled). Later
patches add support for inline asm implementations that use runtime
patching.
When CONFIG_JUMP_LABEL is unset, `static_key_count` is a static inline
function, so a Rust helper is defined for `static_key_count` in this
case. If Rust is compiled with LTO, this call should get inlined. The
helper can be eliminated once we have the necessary inline asm to make
atomic operations from Rust.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: " =?utf-8?q?Bj=C3=B6rn_Roy_Baron?= " <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Link: https://lore.kernel.org/20241030-tracepoint-v12-1-eec7f0f8ad22@google.com
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that the rusttest target for the macros crate is compiled with the
kernel crate as a dependency, the rest of the rustdoc tests can be
enabled.
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-5-ethan.twardy@gmail.com
[ Rebased (use `K{Box,Vec}` instead, enable `lint_reasons` feature).
Remove unneeded `rust` as language in examples, as well as
`#[macro_use]` `extern`s. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
According to the rustdoc for the proc_macro crate[1], tokens captured
from a "macro variable" (e.g. from within macro_rules!) may be delimited
by invisible tokens and be contained within a proc_macro::Group.
Previously, this scenario was not handled by macros::paste, which caused
a proc-macro panic when the corresponding tests are enabled. Enable the
tests, and handle this case by making macros::paste::concat recursive.
Link: https://doc.rust-lang.org/stable/proc_macro/enum.Delimiter.html [1]
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-4-ethan.twardy@gmail.com
[ Rebased (one fix was already applied) and reworded. Remove unneeded
`rust` as language in examples. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Previously, these tests were ignored due to a missing necessary dependency
on the `kernel` crate. Enable the tests, and update them: for both,
add the parameter to `init()`; for the first one, remove the use of a
kernel parameter mechanism that was never merged.
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-3-ethan.twardy@gmail.com
[ Rebased (moved the `export` to the `rustdoc_test` rule, enable the
firmware example too). Removed `export` for `RUST_MODFILE`. Removed
unneeded `rust` language in examples, as well as `#[macro_use]`
`extern`s. Reworded accordingly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Previously, the rusttest target for the macros crate did not specify
the dependencies necessary to run the rustdoc tests. These tests rely on
the kernel crate, so add the dependencies.
Signed-off-by: Ethan D. Twardy <ethan.twardy@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1076
Link: https://lore.kernel.org/r/20240704145607.17732-2-ethan.twardy@gmail.com
[ Rebased (`alloc` is gone nowadays, sysroot handling is simpler) and
simplified (reused `rustdoc_test` rule instead of adding a new one,
no need for `rustdoc-compiler_builtins`, removed unneeded `macros`
explicit path). Made `vtable` example fail (avoiding to increase
the complexity in the `rusttest` target). Removed unstable
`-Zproc-macro-backtrace` option. Reworded accordingly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Update the `Opaque` documentation and add an example as proposed by
Miguel Ojeda in [1]. The documentation update is mainly taken from
Benno Lossin's description [2].
Cc: Nell Shamrell-Harrington <nells@linux.microsoft.com>
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/291565/topic/x/near/467478085 [1]
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/291565/topic/x/near/470498289 [2]
Co-developed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241002050301.1927545-1-dirk.behme@de.bosch.com
[ Used `expect`. Rewrapped docs. Added intra-doc link. Formatted
example. Reworded to fix tag typo/order. Fixed `&mut` formatting
as discussed. Added Benno's SOB and CDB as discussed. Shortened
links. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fix several issues with rustdoc formatting for the
`kernel::block::mq::Request` module, in particular:
- An ordered list not rendering correctly, fixed by using numbers
prefixes instead of letters.
- Code snippets formatted as regular text, fixed by wrapping the
code with `back-ticks`.
- References to types missing intra-doc links, fixed by wrapping the
types with [square brackets].
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1108
Signed-off-by: Francesco Zardi <frazar00@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Link: https://lore.kernel.org/r/20240903173027.16732-3-frazar00@gmail.com
[ Added an extra intra-doc link. Took the chance to add some periods
for consistency. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
One of the example in this section uses a curious mix of the constant
and function declaration syntaxes; fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 823d4737d4 ("rust: macros: add `paste!` proc macro")
Link: https://lore.kernel.org/r/20241019072208.1016707-1-pbonzini@redhat.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The doc comment for `ThisModule` incorrectly states the C header file
for `THIS_MODULE` as `include/linux/export.h`, while the correct path is
`include/linux/init.h`. This is because `THIS_MODULE` was moved in
commit 5b20755b77 ("init: move THIS_MODULE from <linux/export.h> to
<linux/init.h>").
Update the doc comment for `ThisModule` to reflect the correct header
file path for `THIS_MODULE`.
Fixes: 5b20755b77 ("init: move THIS_MODULE from <linux/export.h> to <linux/init.h>")
Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/ZxXDZwxWgoEiIYkj@ohnotp
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is a useful for helper for working with indices into buffers that
consist of several pages. I forgot to include it when I added PAGE_SIZE
and PAGE_MASK for the same purpose in commit fc6e66f469 ("rust: add
abstraction for `struct page`").
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241016-page-align-v2-1-e0afe85fc4b4@google.com
[ Added intra-doc links, formatted comment and replaced "Brackets" with
"Parentheses" as discussed in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit e26fa54604 ("rust: kbuild: auto generate helper exports")
removed the need for these by automatically generating the exports; it
removed the explicit uses of `EXPORT_SYMBOL_GPL` but didn't remove the
`#include <linux/export.h>`s.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241009162553.27845-2-tamird@gmail.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit e26fa54604 ("rust: kbuild: auto generate helper exports")
added an errant "the" where one was not needed; remove it.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Dirk Behme <dirk.behme@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241009162358.27735-1-tamird@gmail.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c4 ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we have our own `Allocator`, `Box` and `Vec` types we can remove
Rust's `alloc` crate and the `new_uninit` unstable feature.
Also remove `Kmalloc`'s `GlobalAlloc` implementation -- we can't remove
this in a separate patch, since the `alloc` crate requires a
`#[global_allocator]` to set, that implements `GlobalAlloc`.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-29-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Before we remove Rust's alloc crate, rewrite the module comment in
alloc.rs to avoid a rustdoc warning.
Besides that, the module comment in alloc.rs isn't correct anymore,
we're no longer extending Rust's alloc crate.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-28-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The current implementation of tests in str.rs use `format!` to format
strings for comparison, which, internally, creates a new `String`.
In order to prepare for getting rid of Rust's alloc crate, we have to
cut this dependency. Instead, implement `format!` for `CString`.
Note that for userspace tests, `Kmalloc`, which is backing `CString`'s
memory, is just a type alias to `Cmalloc`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-27-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
So far the kernel's `Box` and `Vec` types can't be used by userspace
test cases, since all users of those types (e.g. `CString`) use kernel
allocators for instantiation.
In order to allow userspace test cases to make use of such types as
well, implement the `Cmalloc` allocator within the allocator_test module
and type alias all kernel allocators to `Cmalloc`. The `Cmalloc`
allocator uses libc's `realloc()` function as allocator backend.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-26-dakr@kernel.org
[ Removed the temporary `allow(dead_code)` as discussed in the list and
fixed typo, added backticks. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Provide a simple helper function to check whether given flags do
contain one or multiple other flags.
This is used by a subsequent patch implementing the Cmalloc `Allocator`
to check for __GFP_ZERO.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-25-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Additional to `testlib` also check for `test` in `Error::name`. This is
required by a subsequent patch that (indirectly) uses `Error` in test
cases.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-24-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use `core::alloc::LayoutError` instead of `alloc::alloc::LayoutError` in
preparation to get rid of Rust's alloc crate.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-23-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that we removed `VecExt` and the corresponding includes in
prelude.rs, add the new kernel `Vec` type instead.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-22-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that all existing `Vec` users were moved to the kernel `Vec` type,
remove the `VecExt` extension.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-21-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that we got the kernel `Vec` in place, convert all existing `Vec`
users to make use of it.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-20-dakr@kernel.org
[ Converted `kasan_test_rust.rs` too, as discussed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, we can't implement `FromIterator`. There are a couple of
issues with this trait in the kernel, namely:
- Rust's specialization feature is unstable. This prevents us to
optimize for the special case where `I::IntoIter` equals `Vec`'s
`IntoIter` type.
- We also can't use `I::IntoIter`'s type ID either to work around this,
since `FromIterator` doesn't require this type to be `'static`.
- `FromIterator::from_iter` does return `Self` instead of
`Result<Self, AllocError>`, hence we can't properly handle allocation
failures.
- Neither `Iterator::collect` nor `FromIterator::from_iter` can handle
additional allocation flags.
Instead, provide `IntoIter::collect`, such that we can at least convert
`IntoIter` into a `Vec` again.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-19-dakr@kernel.org
[ Added newline in documentation, changed case of section to be
consistent with an existing one, fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `IntoIterator` for `Vec`, `Vec`'s `IntoIter` type, as well as
`Iterator` for `IntoIter`.
`Vec::into_iter` disassembles the `Vec` into its raw parts; additionally,
`IntoIter` keeps track of a separate pointer, which is incremented
correspondingly as the iterator advances, while the length, or the count
of elements, is decremented.
This also means that `IntoIter` takes the ownership of the backing
buffer and is responsible to drop the remaining elements and free the
backing buffer, if it's dropped.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-18-dakr@kernel.org
[ Fixed typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`Vec` provides a contiguous growable array type with contents allocated
with the kernel's allocators (e.g. `Kmalloc`, `Vmalloc` or `KVmalloc`).
In contrast to Rust's stdlib `Vec` type, the kernel `Vec` type considers
the kernel's GFP flags for all appropriate functions, always reports
allocation failures through `Result<_, AllocError>` and remains
independent from unstable features.
[ This patch starts using a new unstable feature, `inline_const`, but
it was stabilized in Rust 1.79.0, i.e. the next version after the
minimum one, thus it will not be an issue. - Miguel ]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-17-dakr@kernel.org
[ Cleaned `rustdoc` unescaped backtick warning, added a couple more
backticks elsewhere, fixed typos, sorted `feature`s, rewrapped
documentation lines. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When allocating memory for arrays using allocators, the `Layout::array`
function is typically used. It returns a result, since the given size
might be too big. However, `Vec` and its iterators store their allocated
capacity and thus they already did check that the size is not too big.
The `ArrayLayout` type provides this exact behavior, as it can be
infallibly converted into a `Layout`. Instead of a `usize` capacity,
`Vec` and other similar array-storing types can use `ArrayLayout`
instead.
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-16-dakr@kernel.org
[ Formatted a few comments. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that we removed `BoxExt` and the corresponding includes in
prelude.rs, add the new kernel `Box` type instead.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-15-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that all existing `Box` users were moved to the kernel `Box` type,
remove the `BoxExt` extension and all other related extensions.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-14-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that we got the kernel `Box` type in place, convert all existing
`Box` users to make use of it.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-13-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`Box` provides the simplest way to allocate memory for a generic type
with one of the kernel's allocators, e.g. `Kmalloc`, `Vmalloc` or
`KVmalloc`.
In contrast to Rust's `Box` type, the kernel `Box` type considers the
kernel's GFP flags for all appropriate functions, always reports
allocation failures through `Result<_, AllocError>` and remains
independent from unstable features.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-12-dakr@kernel.org
[ Added backticks, fixed typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Some test cases in subsequent patches provoke allocation failures. Add
`__GFP_NOWARN` to enable test cases to silence unpleasant warnings.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-11-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `Allocator` for `KVmalloc`, an `Allocator` that tries to
allocate memory with `kmalloc` first and, on failure, falls back to
`vmalloc`.
All memory allocations made with `KVmalloc` end up in
`kvrealloc_noprof()`; all frees in `kvfree()`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-10-dakr@kernel.org
[ Reworded typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `Allocator` for `Vmalloc`, the kernel's virtually contiguous
allocator, typically used for larger objects, (much) larger than page
size.
All memory allocations made with `Vmalloc` end up in `vrealloc()`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-9-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`Allocator`s, such as `Kmalloc`, will be used by e.g. `Box` and `Vec` in
subsequent patches, and hence this dependency propagates throughout the
whole kernel.
Add the `allocator_test` module that provides an empty implementation
for all `Allocator`s in the kernel, such that we don't break the
`rusttest` make target in subsequent patches.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-8-dakr@kernel.org
[ Added missing `_old_layout` parameter as discussed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `Allocator` for `Kmalloc`, the kernel's default allocator,
typically used for objects smaller than page size.
All memory allocations made with `Kmalloc` end up in `krealloc()`.
It serves as allocator for the subsequently introduced types `KBox` and
`KVec`.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-7-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Subsequent patches implement allocators such as `Kmalloc`, `Vmalloc`,
`KVmalloc`; we need them to be available outside of the kernel crate as
well.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-6-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`ReallocFunc` is an abstraction for the kernel's realloc derivates, such
as `krealloc`, `vrealloc` and `kvrealloc`.
All of the named functions share the same function signature and
implement the same semantics. The `ReallocFunc` abstractions provides a
generalized wrapper around those, to trivialize the implementation of
`Kmalloc`, `Vmalloc` and `KVmalloc` in subsequent patches.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-5-dakr@kernel.org
[ Added temporary `allow(dead_code)` for `dangling_from_layout` to clean
warning in `rusttest` target as discussed in the list (but it is
needed earlier, i.e. in this patch already). Added colon. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When building miscdevice with clippy warnings, the following warning is
emitted:
warning: casting to the same type is unnecessary (`u32` -> `u32`)
--> /home/aliceryhl/rust-for-linux/rust/kernel/miscdevice.rs:220:28
|
220 | match T::ioctl(device, cmd as u32, arg as usize) {
| ^^^^^^^^^^ help: try: `cmd`
|
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
= note: `-W clippy::unnecessary-cast` implied by `-W clippy::all`
= help: to override `-W clippy::all` add `#[allow(clippy::unnecessary_cast)]`
Thus, fix it.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241015-miscdevice-cint-cast-v1-1-fcf4b75700ac@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `Task` struct has several safety comments that aren't so great. For
example, the reason that it's okay to read the `pid` is that the field
is immutable, so there is no data race, which is not what the safety
comment says.
Thus, improve the safety comments. Also add an `as_ptr` helper. This
makes it easier to read the various accessors on Task, as `self.0` may
be confusing syntax for new Rust users.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241015-task-safety-cmnts-v1-1-46ee92c82768@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Separate `aligned_size` from `krealloc_aligned`.
Subsequent patches implement `Allocator` derivates, such as `Kmalloc`,
that require `aligned_size` and replace the original `krealloc_aligned`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-3-dakr@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a kernel specific `Allocator` trait, that in contrast to the one in
Rust's core library doesn't require unstable features and supports GFP
flags.
Subsequent patches add the following trait implementors: `Kmalloc`,
`Vmalloc` and `KVmalloc`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-2-dakr@kernel.org
[ Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Here is a single driver core fix, and a .mailmap update, for 6.12-rc3.
The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.) So
this change fixes it up as the from_raw binding came in in -rc1.
The other change is a .mailmap update.
Both have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZwvFxw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymgbgCeLug+WiSiqv1fx5dvJ4dgeA98uUUAn1ZarBGW
9OjdvJu48mDttrIDhwzo
=RtLK
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix, and a .mailmap update.
The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.)
So this change fixes it up as the from_raw binding came in in -rc1.
The other change is a .mailmap update.
Both have been in linux-next for a while with no reported issues"
* tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mailmap: update mail for Fiona Behrens
rust: device: change the from_raw() function
Refactor the `FromBytes` and `AsBytes` traits from `types.rs` into a new
`transmute.rs` module:
- Add `rust/kernel/transmute.rs` with the definitions of `FromBytes`
and `AsBytes`.
- Remove the same trait definitions from `rust/kernel/types.rs`.
- Update `rust/kernel/uaccess.rs` to import `AsBytes` and `FromBytes`
from `transmute.rs`.
The traits and their implementations remain unchanged.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1117
Signed-off-by: Aliet Exposito Garcia <aliet.exposito@gmail.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240918225115.2309224-2-aliet.exposito@gmail.com
[ Rebased on top of the lints series and slightly reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Optimize `Result<(), Error>` size by changing `Error` type to
`NonZero*` for niche optimization.
This reduces the space used by the `Result` type, as the `NonZero*`
type enables the compiler to apply more efficient memory layout.
For example, the `Result<(), Error>` changes size from 8 to 4 bytes.
Link: https://github.com/Rust-for-Linux/linux/issues/1120
Signed-off-by: Filipe Xavier <felipe_life@live.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/BL0PR02MB4914B9B088865CF237731207E9732@BL0PR02MB4914.namprd02.prod.outlook.com
[ Removed unneeded block around `match`, added backticks in panic
message and added intra-doc link. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a non-blocking trylock method to lock backend interface, mutex and
spinlock implementations. It includes a C helper for spin_trylock.
Rust Binder will use this method together with the new shrinker
abstractions to avoid deadlocks in the memory shrinker.
Link: https://lore.kernel.org/all/20240912-shrinker-v1-1-18b7f1253553@google.com
Signed-off-by: Filipe Xavier <felipe_life@live.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/BL0PR02MB4914579914884B5D7473B3D6E96A2@BL0PR02MB4914.namprd02.prod.outlook.com
[ Slightly reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`dbg!` contains adapted code from Rust upstream. Compare the kernel
code with the Rust upstream one and update missing column numbers in
`dbg!` outputs.
Column numbers are not copied but adjusted for the kernel's examples.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1124
Signed-off-by: Deepak Thukral <iapain@gmail.com>
Link: https://lore.kernel.org/r/20241004125616.49886-1-iapain@gmail.com
[ Fixed typo and slightly reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Provide a `MiscDevice` trait that lets you specify the file operations
that you wish to provide for your misc device. For now, only three file
operations are provided: open, close, ioctl.
These abstractions only support MISC_DYNAMIC_MINOR. This enforces that
new miscdevices should not hard-code a minor number.
When implementing ioctl, the Result type is used. This means that you
can choose to return either of:
* An integer of type isize.
* An errno using the kernel::error::Error type.
When returning an isize, the integer is returned verbatim. It's mainly
intended for returning positive integers to userspace. However, it is
technically possible to return errors via the isize return value too.
To avoid having a dependency on files, this patch does not provide the
file operations callbacks a pointer to the file. This means that they
cannot check file properties such as O_NONBLOCK (which Binder needs).
Support for that can be added as a follow-up.
To avoid having a dependency on vma, this patch does not provide any way
to implement mmap (which Binder needs). Support for that can be added as
a follow-up.
Rust Binder will use these abstractions to create the /dev/binder file
when binderfs is disabled.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/rust-for-linux/20240328195457.225001-1-wedsonaf@gmail.com/
Link: https://lore.kernel.org/r/20241001-b4-miscdevice-v2-2-330d760041fa@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will be used by the miscdevice abstractions, as the C function
`misc_register` is fallible.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20241001-b4-miscdevice-v2-1-330d760041fa@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lifetime of `PidNamespace` is bound to `Task` and `struct pid`.
The `PidNamespace` of a `Task` doesn't ever change once the `Task` is
alive. A `unshare(CLONE_NEWPID)` or `setns(fd_pidns/pidfd, CLONE_NEWPID)`
will not have an effect on the calling `Task`'s pid namespace. It will
only effect the pid namespace of children created by the calling `Task`.
This invariant guarantees that after having acquired a reference to a
`Task`'s pid namespace it will remain unchanged.
When a task has exited and been reaped `release_task()` will be called.
This will set the `PidNamespace` of the task to `NULL`. So retrieving
the `PidNamespace` of a task that is dead will return `NULL`. Note, that
neither holding the RCU lock nor holding a referencing count to the
`Task` will prevent `release_task()` being called.
In order to retrieve the `PidNamespace` of a `Task` the
`task_active_pid_ns()` function can be used. There are two cases to
consider:
(1) retrieving the `PidNamespace` of the `current` task (2) retrieving
the `PidNamespace` of a non-`current` task
From system call context retrieving the `PidNamespace` for case (1) is
always safe and requires neither RCU locking nor a reference count to be
held. Retrieving the `PidNamespace` after `release_task()` for current
will return `NULL` but no codepath like that is exposed to Rust.
Retrieving the `PidNamespace` from system call context for (2) requires
RCU protection. Accessing `PidNamespace` outside of RCU protection
requires a reference count that must've been acquired while holding the
RCU lock. Note that accessing a non-`current` task means `NULL` can be
returned as the non-`current` task could have already passed through
`release_task()`.
To retrieve (1) the `current_pid_ns!()` macro should be used which
ensure that the returned `PidNamespace` cannot outlive the calling
scope. The associated `current_pid_ns()` function should not be called
directly as it could be abused to created an unbounded lifetime for
`PidNamespace`. The `current_pid_ns!()` macro allows Rust to handle the
common case of accessing `current`'s `PidNamespace` without RCU
protection and without having to acquire a reference count.
For (2) the `task_get_pid_ns()` method must be used. This will always
acquire a reference on `PidNamespace` and will return an `Option` to
force the caller to explicitly handle the case where `PidNamespace` is
`None`, something that tends to be forgotten when doing the equivalent
operation in `C`. Missing RCU primitives make it difficult to perform
operations that are otherwise safe without holding a reference count as
long as RCU protection is guaranteed. But it is not important currently.
But we do want it in the future.
Note for (2) the required RCU protection around calling
`task_active_pid_ns()` synchronizes against putting the last reference
of the associated `struct pid` of `task->thread_pid`. The `struct pid`
stored in that field is used to retrieve the `PidNamespace` of the
caller. When `release_task()` is called `task->thread_pid` will be
`NULL`ed and `put_pid()` on said `struct pid` will be delayed in
`free_pid()` via `call_rcu()` allowing everyone with an RCU protected
access to the `struct pid` acquired from `task->thread_pid` to finish.
Link: https://lore.kernel.org/r/20241002-brauner-rust-pid_namespace-v5-1-a90e70d44fde@kernel.org
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This adds a simple seq file abstraction that lets you print to a seq
file using ordinary Rust printing syntax.
An example user from Rust Binder:
pub(crate) fn full_debug_print(
&self,
m: &SeqFile,
owner_inner: &mut ProcessInner,
) -> Result<()> {
let prio = self.node_prio();
let inner = self.inner.access_mut(owner_inner);
seq_print!(
m,
" node {}: u{:016x} c{:016x} pri {}:{} hs {} hw {} cs {} cw {}",
self.debug_id,
self.ptr,
self.cookie,
prio.sched_policy,
prio.prio,
inner.strong.has_count,
inner.weak.has_count,
inner.strong.count,
inner.weak.count,
);
if !inner.refs.is_empty() {
seq_print!(m, " proc");
for node_ref in &inner.refs {
seq_print!(m, " {}", node_ref.process.task.pid());
}
}
seq_print!(m, "\n");
for t in &inner.oneway_todo {
t.debug_print_inner(m, " pending async transaction ");
}
Ok(())
}
The `SeqFile` type is marked not thread safe so that `call_printf` can
be a `&self` method. The alternative is to use `self: Pin<&mut Self>`
which is inconvenient, or to have `SeqFile` wrap a pointer instead of
wrapping the C struct directly.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241001-seqfile-v1-1-dfcd0fc21e96@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The term "receiver" means that a type can be used as the type of `self`,
and thus enables method call syntax `foo.bar()` instead of
`Foo::bar(foo)`. Stable Rust as of today (1.81) enables a limited
selection of types (primitives and types in std, e.g. `Box` and `Arc`)
to be used as receivers, while custom types cannot.
We want the kernel `Arc` type to have the same functionality as the Rust
std `Arc`, so we use the `Receiver` trait (gated behind `receiver_trait`
unstable feature) to gain the functionality.
The `arbitrary_self_types` RFC [1] (tracking issue [2]) is accepted and
it will allow all types that implement a new `Receiver` trait (different
from today's unstable trait) to be used as receivers. This trait will be
automatically implemented for all `Deref` types, which include our `Arc`
type, so we no longer have to opt-in to be used as receiver. To prepare
us for the change, remove the `Receiver` implementation and the
associated feature. To still allow `Arc` and others to be used as method
receivers, turn on `arbitrary_self_types` feature instead.
This feature gate is introduced in 1.23.0. It used to enable both
`Deref` types and raw pointer types to be used as receivers, but the
latter is now split into a different feature gate in Rust 1.83 nightly.
We do not need receivers on raw pointers so this change would not affect
us and usage of `arbitrary_self_types` feature would work for all Rust
versions that we support (>=1.78).
Cc: Adrian Taylor <ade@hohum.me.uk>
Link: https://github.com/rust-lang/rfcs/pull/3519 [1]
Link: https://github.com/rust-lang/rust/issues/44874 [2]
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915132734.1653004-1-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It is cleaner to have a single inner attribute rather than needing
several hidden lines to wrap the macro invocations.
Thus simplify them.
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-20-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust, it is possible to `allow` particular warnings (diagnostics,
lints) locally, making the compiler ignore instances of a given warning
within a given function, module, block, etc.
It is similar to `#pragma GCC diagnostic push` + `ignored` + `pop` in C:
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
static void f(void) {}
#pragma GCC diagnostic pop
But way less verbose:
#[allow(dead_code)]
fn f() {}
By that virtue, it makes it possible to comfortably enable more
diagnostics by default (i.e. outside `W=` levels) that may have some
false positives but that are otherwise quite useful to keep enabled to
catch potential mistakes.
The `#[expect(...)]` attribute [1] takes this further, and makes the
compiler warn if the diagnostic was _not_ produced. For instance, the
following will ensure that, when `f()` is called somewhere, we will have
to remove the attribute:
#[expect(dead_code)]
fn f() {}
If we do not, we get a warning from the compiler:
warning: this lint expectation is unfulfilled
--> x.rs:3:10
|
3 | #[expect(dead_code)]
| ^^^^^^^^^
|
= note: `#[warn(unfulfilled_lint_expectations)]` on by default
This means that `expect`s do not get forgotten when they are not needed.
See the next commit for more details, nuances on its usage and
documentation on the feature.
The attribute requires the `lint_reasons` [2] unstable feature, but it
is becoming stable in 1.81.0 (to be released on 2024-09-05) and it has
already been useful to clean things up in this patch series, finding
cases where the `allow`s should not have been there.
Thus, enable `lint_reasons` and convert some of our `allow`s to `expect`s
where possible.
This feature was also an example of the ongoing collaboration between
Rust and the kernel -- we tested it in the kernel early on and found an
issue that was quickly resolved [3].
Cc: Fridtjof Stoldt <xfrednet@gmail.com>
Cc: Urgau <urgau@numericable.fr>
Link: https://rust-lang.github.io/rfcs/2383-lint-reasons.html#expect-lint-attribute [1]
Link: https://github.com/rust-lang/rust/issues/54503 [2]
Link: https://github.com/rust-lang/rust/issues/114557 [3]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-18-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.76.0, Clippy added the `check-private-items` lint configuration
option. When turned on (the default is off), it makes several lints
check private items as well.
In our case, it affects two lints we have enabled [1]:
`missing_safety_doc` and `unnecessary_safety_doc`.
It also seems to affect the new `too_long_first_doc_paragraph` lint [2],
even though the documentation does not mention it.
Thus allow the few instances remaining we currently hit and enable
the lint.
Link: https://doc.rust-lang.org/nightly/clippy/lint_configuration.html#check-private-items [1]
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/too_long_first_doc_paragraph [2]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-16-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust 1.82.0's Clippy is introducing [1][2] a new warn-by-default lint,
`too_long_first_doc_paragraph` [3], which is intended to catch titles
of code documentation items that are too long (likely because no title
was provided and the item documentation starts with a paragraph).
This lint does not currently trigger anywhere, but it does detect a couple
cases if checking for private items gets enabled (which we will do in
the next commit):
error: first doc comment paragraph is too long
--> rust/kernel/init/__internal.rs:18:1
|
18 | / /// This is the module-internal type implementing `PinInit` and `Init`. It is unsafe to create this
19 | | /// type, since the closure needs to fulfill the same safety requirement as the
20 | | /// `__pinned_init`/`__init` functions.
| |_
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_long_first_doc_paragraph
= note: `-D clippy::too-long-first-doc-paragraph` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::too_long_first_doc_paragraph)]`
error: first doc comment paragraph is too long
--> rust/kernel/sync/arc/std_vendor.rs:3:1
|
3 | / //! The contents of this file come from the Rust standard library, hosted in
4 | | //! the <https://github.com/rust-lang/rust> repository, licensed under
5 | | //! "Apache-2.0 OR MIT" and adapted for kernel use. For copyright details,
6 | | //! see <https://github.com/rust-lang/rust/blob/master/COPYRIGHT>.
| |_
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_long_first_doc_paragraph
Thus clean those two instances.
In addition, since we have a second `std_vendor.rs` file with a similar
header, do the same there too (even if that one does not trigger the lint,
because it is `doc(hidden)`).
Link: https://github.com/rust-lang/rust/pull/129531 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/12993 [2]
Link: https://rust-lang.github.io/rust-clippy/master/index.html#/too_long_first_doc_paragraph [3]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-15-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The tag `SAFETY` is used for safety comments, i.e. `// SAFETY`, while a
`Safety` section is used for safety preconditions in code documentation,
i.e. `/// # Safety`.
Fix the three instances recently added in `rbtree` that Clippy would
have normally caught in a public item, so that we can enable checking
of private items in one of the following commits.
Fixes: 98c14e40e0 ("rust: rbtree: add cursor")
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-14-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Back when we used Rust 1.60.0 (before Rust was merged in the kernel),
we added `-Wclippy::dbg_macro` to the compilation flags. This worked
great with our custom `dbg!` macro (vendored from `std`, but slightly
modified to use the kernel printing facilities).
However, in the very next version, 1.61.0, it stopped working [1] since
the lint started to use a Rust diagnostic item rather than a path to find
the `dbg!` macro [1]. This behavior remains until the current nightly
(1.83.0).
Therefore, currently, the `dbg_macro` is not doing anything, which
explains why we can invoke `dbg!` in samples/rust/rust_print.rs`, as well
as why changing the `#[allow()]`s to `#[expect()]`s in `std_vendor.rs`
doctests does not work since they are not fulfilled.
One possible workaround is using `rustc_attrs` like the standard library
does. However, this is intended to be internal, and we just started
supporting several Rust compiler versions, so it is best to avoid it.
Therefore, instead, use `disallowed_macros`. It is a stable lint and
is more flexible (in that we can provide different macros), although
its diagnostic message(s) are not as nice as the specialized one (yet),
and does not allow to set different lint levels per macro/path [2].
In turn, this requires allowing the (intentional) `dbg!` use in the
sample, as one would have expected.
Finally, in a single case, the `allow` is fixed to be an inner attribute,
since otherwise it was not being applied.
Link: https://github.com/rust-lang/rust-clippy/issues/11303 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/11307 [2]
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-13-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust 1.58.0 (before Rust was merged into the kernel) made Clippy's
`non_send_fields_in_send_ty` lint part of the `suspicious` lint group for
a brief window of time [1] until the minor version 1.58.1 got released
a week after, where the lint was moved back to `nursery`.
By that time, we had already upgraded to that Rust version, and thus we
had `allow`ed the lint here for `CondVar`.
Nowadays, Clippy's `non_send_fields_in_send_ty` would still trigger here
if it were enabled.
Moreover, if enabled, `Lock<T, B>` and `Task` would also require an
`allow`. Therefore, it does not seem like someone is actually enabling it
(in, e.g., a custom flags build).
Finally, the lint does not appear to have had major improvements since
then [2].
Thus remove the `allow` since it is unneeded.
Link: https://github.com/rust-lang/rust/blob/master/RELEASES.md#version-1581-2022-01-20 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/8045 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-11-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
