Almost all drivers except bond and nsim had same check if device
can perform XFRM offload on that specific packet. The check was that
packet doesn't have IPv4 options and IPv6 extensions.
In NIC drivers, the IPv4 HELEN comparison was slightly different, but
the intent was to check for the same conditions. So let's chose more
strict variant as a common base.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After change of initialization of x->type_offload pointer to be valid
only for offloaded SAs. There is no need to rely on both x->type_offload
and x->xso.type to determine if SA is offloaded or not.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
SA replay mode is initialized differently for user-space and
kernel-space users, but the call to xfrm_init_replay() existed in
common path with boolean protection. That caused to situation where
we have two different function orders.
So let's rewrite the SA initialization flow to have same order for
both in-kernel and user-space callers.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
XFRM offload path is probed even if offload isn't needed at all. Let's
make sure that x->type_offload pointer stays NULL for such path to
reduce ambiguity.
Fixes: 9d389d7f84 ("xfrm: Add a xfrm type offload.")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d338b246f087ee2b2a305348c896449e107a7ff4.1738746872.git.namcao@linutronix.de
In non-ESN mode, the SEQ numbers are limited to 32 bits and seq_hi/oseq_hi
are not used. So make sure that user gets proper error message, in case
such assignment occurred.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-----BEGIN PGP SIGNATURE-----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=pg+h
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-01-27
1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs.
From Jianbo Liu.
2) Fix an out-of-bounds read on xfrm state lookup.
From Florian Westphal.
3) Fix secpath handling on packet offload mode.
From Alexandre Cassen.
4) Fix the usage of skb->sk in the xfrm layer.
5) Don't disable preemption while looking up cache state
to fix PREEMPT_RT.
From Sebastian Sewior.
* tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Don't disable preemption while looking up cache state.
xfrm: Fix the usage of skb->sk
xfrm: delete intermediate secpath entry in packet offload mode
xfrm: state: fix out-of-bounds read during lookup
xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO
====================
Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the state cache lookup xfrm_input_state_lookup() first disables
preemption, to remain on the CPU and then retrieves a per-CPU pointer.
Within the preempt-disable section it also acquires
netns_xfrm::xfrm_state_lock, a spinlock_t. This lock must not be
acquired with explicit disabled preemption (such as by get_cpu())
because this lock becomes a sleeping lock on PREEMPT_RT.
To remain on the same CPU is just an optimisation for the CPU local
lookup. The actual modification of the per-CPU variable happens with
netns_xfrm::xfrm_state_lock acquired.
Remove get_cpu() and use the state_cache_input on the current CPU.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/all/CAADnVQKkCLaj=roayH=Mjiiqz_svdf1tsC3OE4EC0E=mAD+L1A@mail.gmail.com/
Fixes: 81a331a0e7 ("xfrm: Add an inbound percpu state cache.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm assumed to always have a full socket at skb->sk.
This is not always true, so fix it by converting to a
full socket before it is used.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
init_dummy_netdev() can initialize statically declared or embedded
net_devices. Such netdevs did not come from alloc_netdev_mqs().
After recent work by Breno, there are the only two cases where
we have do that.
Switch those cases to alloc_netdev_mqs() and delete init_dummy_netdev().
Dealing with static netdevs is not worth the maintenance burden.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously xfrm_dev_state_advance_esn() was added for RX only. But
it's possible that ESN context also need to be synced to hardware for
TX, so call it for outbound in this patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Handle the receipt of the outer tunnel packets out-of-order. Pointers to
the out-of-order packets are saved in a window (array) awaiting needed
prior packets. When the required prior packets are received the now
in-order packets are then passed on to the regular packet receive code.
A timer is used to consider missing earlier packet as lost so the
algorithm will advance.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Avoid copying the inner packet data by sharing the skb data fragments
from the output packet skb into new inner packet skb.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add an optimization of re-using the tunnel outer skb re-transmission
of the inner packet to avoid skb allocation and copy.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add support for handling receipt of partial inner packets that have
been fragmented across multiple outer IP-TFS tunnel packets.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add handling of packets received from the tunnel. This implements
tunnel egress functionality.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add support for tunneling user (inner) packets that are larger than the
tunnel's path MTU (outer) using IP-TFS fragmentation.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When possible rather than appending secondary (aggregated) inner packets
to the fragment list, share their page fragments with the outer IPTFS
packet. This allows for more efficient packet transmission.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add tunnel packet output functionality. This is code handles
the ingress to the tunnel.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a new xfrm mode implementing AggFrag/IP-TFS from RFC9347.
This utilizes the new xfrm_mode_cbs to implement demand-driven IP-TFS
functionality. This functionality can be used to increase bandwidth
utilization through small packet aggregation, as well as help solve PMTU
issues through it's efficient use of fragmentation.
Link: https://www.rfc-editor.org/rfc/rfc9347.txt
Multiple commits follow to build the functionality into xfrm_iptfs.c
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Define `XFRM_MODE_IPTFS` and `IPSEC_MODE_IPTFS` constants, and add these to
switch case and conditionals adjacent with the existing TUNNEL modes.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a set of callbacks xfrm_mode_cbs to xfrm_state. These callbacks
enable the addition of new xfrm modes, such as IP-TFS to be defined
in modules.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch.
Reported-by: syzbot+5f9f31cb7d985f584d8e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CACT4Y+azwfrE3uz6A5ZErov5YN2LYBN5KrsymBerT36VU8qzBA@mail.gmail.com/
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: c2f672fc94 ("xfrm: state lookup can be lockless")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When skb needs GSO and wrap around happens, if xo->seq.low (seqno of
the first skb segment) is before the last seq number but oseq (seqno
of the last segment) is after it, xo->seq.low is still bigger than
replay_esn->oseq while oseq is smaller than it, so the update of
replay_esn->oseq_hi is missed for this case wrap around because of
the change in the cited commit.
For example, if sending a packet with gso_segs=3 while old
replay_esn->oseq=0xfffffffe, we calculate:
xo->seq.low = 0xfffffffe + 1 = 0x0xffffffff
oseq = 0xfffffffe + 3 = 0x1
(oseq < replay_esn->oseq) is true, but (xo->seq.low <
replay_esn->oseq) is false, so replay_esn->oseq_hi is not incremented.
To fix this issue, change the outer checking back for the update of
replay_esn->oseq_hi. And add new checking inside for the update of
packet's oseq_hi.
Fixes: 4b549ccce9 ("xfrm: replay: Fix ESN wrap around for GSO")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-----BEGIN PGP SIGNATURE-----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=Ioo8
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-11-15
1) Add support for RFC 9611 per cpu xfrm state handling.
2) Add inbound and outbound xfrm state caches to speed up
state lookups.
3) Convert xfrm to dscp_t. From Guillaume Nault.
4) Fix error handling in build_aevent.
From Everest K.C.
5) Replace strncpy with strscpy_pad in copy_to_user_auth.
From Daniel Yang.
6) Fix an uninitialized symbol during acquire state insertion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A recent commit jumped over the dst hash computation and
left the symbol uninitialized. Fix this by explicitly
computing the dst hash before it is used.
Fixes: 0045e3d806 ("xfrm: Cache used outbound xfrm states at the policy.")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The function strncpy is deprecated since it does not guarantee the
destination buffer is NULL terminated. Recommended replacement is
strscpy. The padded version was used to remain consistent with the other
strscpy_pad usage in the modified function.
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Error handling is missing when call to nla_put_u32() fails.
Handle the error when the call to nla_put_u32() returns an error.
The error was reported by Coverity Scan.
Report:
CID 1601525: (#1 of 1): Unused value (UNUSED_VALUE)
returned_value: Assigning value from nla_put_u32(skb, XFRMA_SA_PCPU, x->pcpu_num)
to err here, but that stored value is overwritten before it can be used
Fixes: 1ddf9916ac ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Most of the original conversion is from the spatch below,
but I edited some and left out other instances that were
either buggy after conversion (where default values don't
fit into the type) or just looked strange.
@@
expression attr, def;
expression val;
identifier fn =~ "^nla_get_.*";
fresh identifier dfn = fn ## "_default";
@@
(
-if (attr)
- val = fn(attr);
-else
- val = def;
+val = dfn(attr, def);
|
-if (!attr)
- val = def;
-else
- val = fn(attr);
+val = dfn(attr, def);
|
-if (!attr)
- return def;
-return fn(attr);
+return dfn(attr, def);
|
-attr ? fn(attr) : def
+dfn(attr, def)
|
-!attr ? def : fn(attr)
+dfn(attr, def)
)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add type annotation to the "tos" field of struct xfrm_dst_lookup_params,
to ensure that the ECN bits aren't mistakenly taken into account when
doing route lookups. Rename that field (tos -> dscp) to make that
change explicit.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pass a dscp_t variable to xfrm_dst_lookup(), instead of an int, to
prevent accidental setting of ECN bits in ->flowi4_tos.
Only xfrm_bundle_create() actually calls xfrm_dst_lookup(). Since it
already has a dscp_t variable to pass as parameter, we only need to
remove the inet_dscp_to_dsfield() conversion.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Use a dscp_t variable to store the result of xfrm_get_dscp().
This prepares for the future conversion of xfrm_dst_lookup().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Return a dscp_t variable to prepare for the future conversion of
xfrm_bundle_create() to dscp_t.
While there, rename the function "xfrm_get_dscp", to align its name
with the new return type.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reject the usage of XFRMA_SA_PCPU in xfrm netlink messages when
it's not applicable.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Now that we can have percpu xfrm states, the number of active
states might increase. To get a better lookup performance,
we add a percpu cache to cache the used inbound xfrm states.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Now that we can have percpu xfrm states, the number of active
states might increase. To get a better lookup performance,
we cache the used xfrm states at the policy for outbound
IPsec traffic.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Currently all flows for a certain SA must be processed by the same
cpu to avoid packet reordering and lock contention of the xfrm
state lock.
To get rid of this limitation, the IETF standardized per cpu SAs
in RFC 9611. This patch implements the xfrm part of it.
We add the cpu as a lookup key for xfrm states and a config option
to generate acquire messages for each cpu.
With that, we can have on each cpu a SA with identical traffic selector
so that flows can be processed in parallel on all cpus.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Tested-by: Tobias Brunner <tobias@strongswan.org>
-----BEGIN PGP SIGNATURE-----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=Ai21
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2024-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-10-22
1) Fix routing behavior that relies on L4 information
for xfrm encapsulated packets.
From Eyal Birger.
2) Remove leftovers of pernet policy_inexact lists.
From Florian Westphal.
3) Validate new SA's prefixlen when the selector family is
not set from userspace.
From Sabrina Dubroca.
4) Fix a kernel-infoleak when dumping an auth algorithm.
From Petr Vaganov.
Please pull or let me know if there are problems.
ipsec-2024-10-22
* tag 'ipsec-2024-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix one more kernel-infoleak in algo dumping
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
xfrm: policy: remove last remnants of pernet inexact list
xfrm: respect ip protocols rules criteria when performing dst lookups
xfrm: extract dst lookup parameters into a struct
====================
Link: https://patch.msgid.link/20241022092226.654370-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During fuzz testing, the following issue was discovered:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x598/0x2a30
_copy_to_iter+0x598/0x2a30
__skb_datagram_iter+0x168/0x1060
skb_copy_datagram_iter+0x5b/0x220
netlink_recvmsg+0x362/0x1700
sock_recvmsg+0x2dc/0x390
__sys_recvfrom+0x381/0x6d0
__x64_sys_recvfrom+0x130/0x200
x64_sys_call+0x32c8/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Uninit was stored to memory at:
copy_to_user_state_extra+0xcc1/0x1e00
dump_one_state+0x28c/0x5f0
xfrm_state_walk+0x548/0x11e0
xfrm_dump_sa+0x1e0/0x840
netlink_dump+0x943/0x1c40
__netlink_dump_start+0x746/0xdb0
xfrm_user_rcv_msg+0x429/0xc00
netlink_rcv_skb+0x613/0x780
xfrm_netlink_rcv+0x77/0xc0
netlink_unicast+0xe90/0x1280
netlink_sendmsg+0x126d/0x1490
__sock_sendmsg+0x332/0x3d0
____sys_sendmsg+0x863/0xc30
___sys_sendmsg+0x285/0x3e0
__x64_sys_sendmsg+0x2d6/0x560
x64_sys_call+0x1316/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Uninit was created at:
__kmalloc+0x571/0xd30
attach_auth+0x106/0x3e0
xfrm_add_sa+0x2aa0/0x4230
xfrm_user_rcv_msg+0x832/0xc00
netlink_rcv_skb+0x613/0x780
xfrm_netlink_rcv+0x77/0xc0
netlink_unicast+0xe90/0x1280
netlink_sendmsg+0x126d/0x1490
__sock_sendmsg+0x332/0x3d0
____sys_sendmsg+0x863/0xc30
___sys_sendmsg+0x285/0x3e0
__x64_sys_sendmsg+0x2d6/0x560
x64_sys_call+0x1316/0x3cc0
do_syscall_64+0xd8/0x1c0
entry_SYSCALL_64_after_hwframe+0x79/0x81
Bytes 328-379 of 732 are uninitialized
Memory access of size 732 starts at ffff88800e18e000
Data copied to user address 00007ff30f48aff0
CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Fixes copying of xfrm algorithms where some random
data of the structure fields can end up in userspace.
Padding in structures may be filled with random (possibly sensitve)
data and should never be given directly to user-space.
A similar issue was resolved in the commit
8222d5910d ("xfrm: Zero padding when dumping algos and encap")
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: c7a5899eb2 ("xfrm: redact SA secret with lockdown confidentiality")
Cc: stable@vger.kernel.org
Co-developed-by: Boris Tonofa <b.tonofa@ideco.ru>
Signed-off-by: Boris Tonofa <b.tonofa@ideco.ru>
Signed-off-by: Petr Vaganov <p.vaganov@ideco.ru>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This expands the validation introduced in commit 07bf790895 ("xfrm:
Validate address prefix lengths in the xfrm selector.")
syzbot created an SA with
usersa.sel.family = AF_UNSPEC
usersa.sel.prefixlen_s = 128
usersa.family = AF_INET
Because of the AF_UNSPEC selector, verify_newsa_info doesn't put
limits on prefixlen_{s,d}. But then copy_from_user_state sets
x->sel.family to usersa.family (AF_INET). Do the same conversion in
verify_newsa_info before validating prefixlen_{s,d}, since that's how
prefixlen is going to be used later on.
Reported-by: syzbot+cc39f136925517aed571@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
The series in the "fixes" tag added the ability to consider L4 attributes
in routing rules.
The dst lookup on the outer packet of encapsulated traffic in the xfrm
code was not adapted to this change, thus routing behavior that relies
on L4 information is not respected.
Pass the ip protocol information when performing dst lookups.
Fixes: a25724b05a ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Preparation for adding more fields to dst lookup functions without
changing their signatures.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-----BEGIN PGP SIGNATURE-----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=ErGl
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clang warns (or errors with CONFIG_WERROR):
net/xfrm/xfrm_policy.c:1286:8: error: variable 'dir' is uninitialized when used here [-Werror,-Wuninitialized]
1286 | if ((dir & XFRM_POLICY_MASK) == XFRM_POLICY_OUT) {
| ^~~
net/xfrm/xfrm_policy.c:1257:9: note: initialize the variable 'dir' to silence this warning
1257 | int dir;
| ^
| = 0
1 error generated.
A recent refactoring removed some assignments to dir because
xfrm_policy_is_dead_or_sk() has a dir assignment in it. However, dir is
used elsewhere in xfrm_hash_rebuild(), including within loops where it
needs to be reloaded for each policy. Restore the assignments before the
first use of dir to fix the warning and ensure dir is properly
initialized throughout the function.
Fixes: 08c2182cf0 ("xfrm: policy: use recently added helper in more places")
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This reverts commit e7cd191f83.
While supporting xfrm interfaces in the packet offload API
is needed, this patch does not do the right thing. There are
more things to do to really support xfrm interfaces, so revert
it for now.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The function returns a value that is used to initialize 'flowi4_tos'
before being passed to the FIB lookup API in the following call chain:
xfrm_bundle_create()
tos = xfrm_get_tos(fl, family)
xfrm_dst_lookup(..., tos, ...)
__xfrm_dst_lookup(..., tos, ...)
xfrm4_dst_lookup(..., tos, ...)
__xfrm4_dst_lookup(..., tos, ...)
fl4->flowi4_tos = tos
__ip_route_output_key(net, fl4)
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Remove IPTOS_RT_MASK since it is no longer used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The spd is no longer maintained as a linear list.
We also haven't been caching bundles in the xfrm_policy
struct since 2010.
While at it, add kdoc style comments for the xfrm_policy structure
and extend the description of the current rbtree based search to
mention why it needs to search the candidate set.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In packet offload mode, append Security Association (SA) information
to each packet, replicating the crypto offload implementation.
The XFRM_XMIT flag is set to enable packet to be returned immediately
from the validate_xmit_xfrm function, thus aligning with the existing
code path for packet offload mode.
This SA info helps HW offload match packets to their correct security
policies. The XFRM interface ID is included, which is crucial in setups
with multiple XFRM interfaces where source/destination addresses alone
can't pinpoint the right policy.
Signed-off-by: wangfe <wangfe@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
No consumers anymore, remove it. After this, insertion of policies
no longer require list walk of all inexact policies but only those
that are reachable via the candidate sets.
This gives almost linear insertion speeds provided the inserted
policies are for non-overlapping networks.
Before:
Inserted 1000 policies in 70 ms
Inserted 10000 policies in 1155 ms
Inserted 100000 policies in 216848 ms
After:
Inserted 1000 policies in 56 ms
Inserted 10000 policies in 478 ms
Inserted 100000 policies in 4580 ms
Insertion of 1m entries takes about ~40s after this change
on my test vm.
Cc: Noel Kuntze <noel@familie-kuntze.de>
Cc: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
XFRM_MIGRATE still uses the old lookup method:
first check the bydst hash table, then search the list of all the other
policies.
Switch MIGRATE to use the same lookup function as the packetpath.
This is done to remove the last remaining users of the pernet
xfrm.policy_inexact lists with the intent of removing this list.
After this patch, policies are still added to the list on insertion
and they are rehashed as-needed but no single API makes use of these
anymore.
This change is compile tested only.
Cc: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Since commit
6be3b0db6d ("xfrm: policy: add inexact policy search tree infrastructure")
policy lookup no longer walks a list but has a set of candidate lists.
This set has to be searched for the best match.
In case there are several matches, the priority wins.
If the priority is also the same, then the historic behaviour with
a single list was to return the first match (first-in-list).
With introduction of serval lists, this doesn't work and a new
'pos' member was added that reflects the xfrm_policy structs position
in the list.
This value is not exported to userspace and it does not need to be
the 'position in the list', it just needs to make sure that
a->pos < b->pos means that a was added to the lists more recently
than b.
This re-walk is expensive when many inexact policies are in use.
Speed this up: when appending the policy to the end of the walker list,
then just take the ->pos value of the last entry made and add 1.
Add a slowpath version to prevent overflow, if we'd assign UINT_MAX
then iterate the entire list and fix the ordering.
While this speeds up insertion considerably finding the insertion spot
in the inexact list still requires a partial list walk.
This is addressed in followup patches.
Before:
./xfrm_policy_add_speed.sh
Inserted 1000 policies in 72 ms
Inserted 10000 policies in 1540 ms
Inserted 100000 policies in 334780 ms
After:
Inserted 1000 policies in 68 ms
Inserted 10000 policies in 1137 ms
Inserted 100000 policies in 157307 ms
Reported-by: Noel Kuntze <noel@familie-kuntze.de>
Cc: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The original idea to put WARN_ON() on return value from driver code was
to make sure that packet offload doesn't have silent fallback to
SW implementation, like crypto offload has.
In reality, this is not needed as all *swan implementations followed
this request and used explicit configuration style to make sure that
"users will get what they ask".
So instead of forcing drivers to make sure that even their internal flows
don't return -EOPNOTSUPP, let's remove this WARN_ON.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Merge in late fixes to prepare for the 6.11 net-next PR.
Conflicts:
93c3a96c30 ("net: pse-pd: Do not return EOPNOSUPP if config is null")
4cddb0f15e ("net: ethtool: pse-pd: Fix possible null-deref")
30d7b67277 ("net: ethtool: Add new power limit get and set features")
https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KyYL
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-07-13
1) Support sending NAT keepalives in ESP in UDP states.
Userspace IKE daemon had to do this before, but the
kernel can better keep track of it.
From Eyal Birger.
2) Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths. Currently, IPsec crypto offload is enabled for GRO
code path only. This patchset support UDP encapsulation for the non
GRO path. From Mike Yu.
* tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Support crypto offload for outbound IPv4 UDP-encapsulated ESP packet
xfrm: Support crypto offload for inbound IPv4 UDP-encapsulated ESP packet
xfrm: Allow UDP encapsulation in crypto offload control path
xfrm: Support crypto offload for inbound IPv6 ESP packets not in GRO path
xfrm: support sending NAT keepalives in ESP in UDP states
====================
Link: https://patch.msgid.link/20240713102416.3272997-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xFmH
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-07-11
1) Fix esp_output_tail_tcp() on unsupported ESPINTCP.
From Hagar Hemdan.
2) Fix two bugs in the recently introduced SA direction separation.
From Antony Antony.
3) Fix unregister netdevice hang on hardware offload. We had to add another
list where skbs linked to that are unlinked from the lists (deleted)
but not yet freed.
4) Fix netdev reference count imbalance in xfrm_state_find.
From Jianbo Liu.
5) Call xfrm_dev_policy_delete when killingi them on offloaded policies.
Jianbo Liu.
* tag 'ipsec-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: call xfrm_dev_policy_delete when kill policy
xfrm: fix netdev reference count imbalance
xfrm: Export symbol xfrm_dev_state_delete.
xfrm: Fix unregister netdevice hang on hardware offload.
xfrm: Log input direction mismatch error in one place
xfrm: Fix input error path memory access
net: esp: cleanup esp_output_tail_tcp() in case of unsupported ESPINTCP
====================
Link: https://patch.msgid.link/20240711100025.1949454-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If xfrm_input() is called with UDP_ENCAP_ESPINUDP, the packet is
already processed in UDP layer that removes the UDP header.
Therefore, there should be no much difference to treat it as an
ESP packet in the XFRM stack.
Test: Enabled dir=in IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Unblock this limitation so that SAs with encapsulation specified
can be passed to HW drivers. HW drivers can still reject the SA
in their implementation of xdo_dev_state_add if the encapsulation
is not supported.
Test: Verified on Android device
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
IPsec crypt offload supports outbound IPv6 ESP packets, but it doesn't
support inbound IPv6 ESP packets.
This change enables the crypto offload for inbound IPv6 ESP packets
that are not handled through GRO code path. If HW drivers add the
offload information to the skb, the packet will be handled in the
crypto offload rx code path.
Apart from the change in crypto offload rx code path, the change
in xfrm_policy_check is also needed.
Exampe of RX data path:
+-----------+ +-------+
| HW Driver |-->| wlan0 |--------+
+-----------+ +-------+ |
v
+---------------+ +------+
+------>| Network Stack |-->| Apps |
| +---------------+ +------+
| |
| v
+--------+ +------------+
| ipsec1 |<--| XFRM Stack |
+--------+ +------------+
Test: Enabled both in/out IPsec crypto offload, and verified IPv6
ESP packets on Android device on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_policy_kill() is called at different places to delete xfrm
policy. It will call xfrm_pol_put(). But xfrm_dev_policy_delete() is
not called to free the policy offloaded to hardware.
The three commits cited here are to handle this issue by calling
xfrm_dev_policy_delete() outside xfrm_get_policy(). But they didn't
cover all the cases. An example, which is not handled for now, is
xfrm_policy_insert(). It is called when XFRM_MSG_UPDPOLICY request is
received. Old policy is replaced by new one, but the offloaded policy
is not deleted, so driver doesn't have the chance to release hardware
resources.
To resolve this issue for all cases, move xfrm_dev_policy_delete()
into xfrm_policy_kill(), so the offloaded policy can be deleted from
hardware when it is called, which avoids hardware resources leakage.
Fixes: 919e43fad5 ("xfrm: add an interface to offload policy")
Fixes: bf06fcf4be ("xfrm: add missed call to delete offloaded policies")
Fixes: 982c3aca8b ("xfrm: delete offloaded policy")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In cited commit, netdev_tracker_alloc() is called for the newly
allocated xfrm state, but dev_hold() is missed, which causes netdev
reference count imbalance, because netdev_put() is called when the
state is freed in xfrm_dev_state_free(). Fix the issue by replacing
netdev_tracker_alloc() with netdev_hold().
Fixes: f8a70afafc ("xfrm: add TX datapath support for IPsec packet offload mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This fixes a build failure if xfrm_user is build as a module.
Fixes: 07b87f9eea ("xfrm: Fix unregister netdevice hang on hardware offload.")
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add the ability to send out RFC-3948 NAT keepalives from the xfrm stack.
To use, Userspace sets an XFRM_NAT_KEEPALIVE_INTERVAL integer property when
creating XFRM outbound states which denotes the number of seconds between
keepalive messages.
Keepalive messages are sent from a per net delayed work which iterates over
the xfrm states. The logic is guarded by the xfrm state spinlock due to the
xfrm state walk iterator.
Possible future enhancements:
- Adding counters to keep track of sent keepalives.
- deduplicate NAT keepalives between states sharing the same nat keepalive
parameters.
- provisioning hardware offloads for devices capable of implementing this.
- revise xfrm state list to use an rcu list in order to avoid running this
under spinlock.
Suggested-by: Paul Wouters <paul.wouters@aiven.io>
Tested-by: Paul Wouters <paul.wouters@aiven.io>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When offloading xfrm states to hardware, the offloading
device is attached to the skbs secpath. If a skb is free
is deferred, an unregister netdevice hangs because the
netdevice is still refcounted.
Fix this by removing the netdevice from the xfrm states
when the netdevice is unregistered. To find all xfrm states
that need to be cleared we add another list where skbs
linked to that are unlinked from the lists (deleted)
but not yet freed.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Previously, the offload data path decrypted the packet before checking
the direction, leading to error logging and packet dropping. However,
dropped packets wouldn't be visible in tcpdump or audit log.
With this fix, the offload path, upon noticing SA direction mismatch,
will pass the packet to the stack without decrypting it. The L3 layer
will then log the error, audit, and drop ESP without decrypting or
decapsulating it.
This also ensures that the slow path records the error and audit log,
making dropped packets visible in tcpdump.
Fixes: 304b44f0d5 ("xfrm: Add dir validation to "in" data path lookup")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.
RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).
Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.
Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.
Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.
Many thanks to Clement Lecigne for tracking this issue.
This old bug became visible after the blamed commit, using UDP sockets.
Fixes: a87cb3e48e ("net: Facility to report route quality of connected sockets")
Reported-by: Clement Lecigne <clecigne@google.com>
Diagnosed-by: Clement Lecigne <clecigne@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfba ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5f ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
All rtnl_link_ops->get_link_net() methods already using dev_net()
are ready. I added READ_ONCE() annotations on others.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=QiGZ
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-05-03
1) Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support.
This was defined by an early version of an IETF draft
that did not make it to a standard.
2) Introduce direction attribute for xfrm states.
xfrm states have a direction, a stsate can be used
either for input or output packet processing.
Add a direction to xfrm states to make it clear
for what a xfrm state is used.
* tag 'ipsec-next-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Restrict SA direction attribute to specific netlink message types
xfrm: Add dir validation to "in" data path lookup
xfrm: Add dir validation to "out" data path lookup
xfrm: Add Direction to the SA in or out
udpencap: Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support
====================
Link: https://lore.kernel.org/r/20240503082732.2835810-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
To avoid lots of small commits, this commit brings together network
changes from (as they appear in MAINTAINERS) LLC, MPTCP, NETROM NETWORK
LAYER, PHONET PROTOCOL, ROSE NETWORK LAYER, RXRPC SOCKETS, SCTP
PROTOCOL, SHARED MEMORY COMMUNICATIONS (SMC), TIPC NETWORK LAYER and
NETWORKING [IPSEC]
* Remove sentinel element from ctl_table structs.
* Replace empty array registration with the register_net_sysctl_sz call
in llc_sysctl_init
* Replace the for loop stop condition that tests for procname == NULL
with one that depends on array size in sctp_sysctl_net_register
* Remove instances where an array element is zeroed out to make it look
like a sentinel in xfrm_sysctl_init. This is not longer needed and is
safe after commit c899710fe7 ("networking: Update to
register_net_sysctl_sz") added the array size to the ctl_table
registration
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reject the usage of the SA_DIR attribute in xfrm netlink messages when
it's not applicable. This ensures that SA_DIR is only accepted for
certain message types (NEWSA, UPDSA, and ALLOCSPI)
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Introduces validation for the x->dir attribute within the XFRM input
data lookup path. If the configured direction does not match the
expected direction, input, increment the XfrmInStateDirError counter
and drop the packet to ensure data integrity and correct flow handling.
grep -vw 0 /proc/net/xfrm_stat
XfrmInStateDirError 1
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Introduces validation for the x->dir attribute within the XFRM output
data lookup path. If the configured direction does not match the expected
direction, output, increment the XfrmOutStateDirError counter and drop
the packet to ensure data integrity and correct flow handling.
grep -vw 0 /proc/net/xfrm_stat
XfrmOutPolError 1
XfrmOutStateDirError 1
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch introduces the 'dir' attribute, 'in' or 'out', to the
xfrm_state, SA, enhancing usability by delineating the scope of values
based on direction. An input SA will restrict values pertinent to input,
effectively segregating them from output-related values.
And an output SA will restrict attributes for output. This change aims
to streamline the configuration process and improve the overall
consistency of SA attributes during configuration.
This feature sets the groundwork for future patches, including
the upcoming IP-TFS patch.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev. This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags. Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.
The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.
Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO. The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.
Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The missing check of x->encap caused to the situation where GSO packets
were created with UDP encapsulation.
As a solution return the encap check for non-offloaded SA.
Fixes: 983a73da1f ("xfrm: Pass UDP encapsulation in TX packet offload")
Closes: https://lore.kernel.org/all/a650221ae500f0c7cf496c61c96c1b103dcb6f67.camel@redhat.com
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-----BEGIN PGP SIGNATURE-----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=e4aa
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Introduce forwarding of ICMP Error messages. That is specified
in RFC 4301 but was never implemented. From Antony Antony.
2) Use KMEM_CACHE instead of kmem_cache_create in xfrm6_tunnel_init()
and xfrm_policy_init(). From Kunwu Chan.
3) Do not allocate stats in the xfrm interface driver, this can be done
on net core now. From Breno Leitao.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev_max_backlog is used in rx fat path.
Move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FnLp
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2024-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-03-06
1) Clear the ECN bits flowi4_tos in decode_session4().
This was already fixed but the bug was reintroduced
when decode_session4() switched to us the flow dissector.
From Guillaume Nault.
2) Fix UDP encapsulation in the TX path with packet offload mode.
From Leon Romanovsky,
3) Avoid clang fortify warning in copy_to_user_tmpl().
From Nathan Chancellor.
4) Fix inter address family tunnel in packet offload mode.
From Mike Yu.
* tag 'ipsec-2024-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: set skb control buffer based on packet offload as well
xfrm: fix xfrm child route lookup for packet offload
xfrm: Avoid clang fortify warning in copy_to_user_tmpl()
xfrm: Pass UDP encapsulation in TX packet offload
xfrm: Clear low order bits of ->flowi4_tos in decode_session4().
====================
Link: https://lore.kernel.org/r/20240306100438.3953516-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In packet offload, packets are not encrypted in XFRM stack, so
the next network layer which the packets will be forwarded to
should depend on where the packet came from (either xfrm4_output
or xfrm6_output) rather than the matched SA's family type.
Test: verified IPv6-in-IPv4 packets on Android device with
IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In current code, xfrm_bundle_create() always uses the matched
SA's family type to look up a xfrm child route for the skb.
The route returned by xfrm_dst_lookup() will eventually be
used in xfrm_output_resume() (skb_dst(skb)->ops->local_out()).
If packet offload is used, the above behavior can lead to
calling ip_local_out() for an IPv6 packet or calling
ip6_local_out() for an IPv4 packet, which is likely to fail.
This change fixes the behavior by checking if the matched SA
has packet offload enabled. If not, keep the same behavior;
if yes, use the matched SP's family type for the lookup.
Test: verified IPv6-in-IPv4 packets on Android device with
IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZeEKVAAKCRDbK58LschI
g7oYAQD5Jlv4fIVTvxvfZrTTZ2tU+OsPa75mc8SDKwpash3YygEA8kvESy8+t6pg
D6QmSf1DIZdFoSp/bV+pfkNWMeR8gwg=
=mTAj
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the xfrm driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
This patch prepares dev_get_iflink() and nla_put_iflink()
to run either with RTNL or RCU held.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After a couple recent changes in LLVM, there is a warning (or error with
CONFIG_WERROR=y or W=e) from the compile time fortify source routines,
specifically the memset() in copy_to_user_tmpl().
In file included from net/xfrm/xfrm_user.c:14:
...
include/linux/fortify-string.h:438:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
438 | __write_overflow_field(p_size_field, size);
| ^
1 error generated.
While ->xfrm_nr has been validated against XFRM_MAX_DEPTH when its value
is first assigned in copy_templates() by calling validate_tmpl() first
(so there should not be any issue in practice), LLVM/clang cannot really
deduce that across the boundaries of these functions. Without that
knowledge, it cannot assume that the loop stops before i is greater than
XFRM_MAX_DEPTH, which would indeed result a stack buffer overflow in the
memset().
To make the bounds of ->xfrm_nr clear to the compiler and add additional
defense in case copy_to_user_tmpl() is ever used in a path where
->xfrm_nr has not been properly validated against XFRM_MAX_DEPTH first,
add an explicit bound check and early return, which clears up the
warning.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1985
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the XFRM interface drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit 0a31bd5f2b ("KMEM_CACHE(): simplify slab cache creation")
introduces a new macro.
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
