When a qdisc is deleted from a net device the stack instructs the
underlying driver to remove its flow offload callback from the
associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack
then continues to replay the removal of the filters in the block for
this driver by iterating over the chains in the block and invoking the
'reoffload' operation of the classifier being used. In turn, the
classifier in its 'reoffload' operation prepares and emits a
'FLOW_CLS_DESTROY' command for each filter.
However, the stack does not do the same for chain templates and the
underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when
a qdisc is deleted. This results in a memory leak [1] which can be
reproduced using [2].
Fix by introducing a 'tmplt_reoffload' operation and have the stack
invoke it with the appropriate arguments as part of the replay.
Implement the operation in the sole classifier that supports chain
templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}'
command based on whether a flow offload callback is being bound to a
filter block or being unbound from one.
As far as I can tell, the issue happens since cited commit which
reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains()
in __tcf_block_put(). The order cannot be reversed as the filter block
is expected to be freed after flushing all the chains.
[1]
unreferenced object 0xffff888107e28800 (size 2048):
comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
hex dump (first 32 bytes):
b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[......
01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................
backtrace:
[<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
[<ffffffff81ab374e>] __kmalloc+0x4e/0x90
[<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0
[<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
[<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
[<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
[<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
[<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
[<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
[<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
[<ffffffff83ac6270>] netlink_unicast+0x540/0x820
[<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
[<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
[<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0
[<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0
[<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0
unreferenced object 0xffff88816d2c0400 (size 1024):
comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
hex dump (first 32 bytes):
40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8.....
10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m....
backtrace:
[<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
[<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90
[<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0
[<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460
[<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0
[<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0
[<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
[<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
[<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
[<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
[<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
[<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
[<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
[<ffffffff83ac6270>] netlink_unicast+0x540/0x820
[<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
[<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
[2]
# tc qdisc add dev swp1 clsact
# tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32
# tc qdisc del dev swp1 clsact
# devlink dev reload pci/0000:06:00.0
Fixes: bbf73830cd ("net: sched: traverse chains in block with tcf_get_next_chain()")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clsact/ingress qdisc is not the only one using shared block,
red is also using it. The device tracking was originally introduced
by commit 913b47d342 ("net/sched: Introduce tc block netdev
tracking infra") for clsact/ingress only. Commit 94e2557d08 ("net:
sched: move block device tracking into tcf_block_get/put_ext()")
mistakenly enabled that for red as well.
Fix that by adding a check for the binder type being clsact when adding
device to the block->ports xarray.
Reported-by: Ido Schimmel <idosch@idosch.org>
Closes: https://lore.kernel.org/all/ZZ6JE0odnu1lLPtu@shredder/
Fixes: 94e2557d08 ("net: sched: move block device tracking into tcf_block_get/put_ext()")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options.
[ mingo: Converted a few more uses in comments/messages as well. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ariel Miculas <amiculas@cisco.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org
Instead of using two bools derived from a flags passed as arguments to
the parent function of tc_action_load_ops, just pass the flags itself
to tc_action_load_ops to simplify its parameters.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement conditional netlink notifications for Qdiscs and classes,
which were missing in the initial patches that targeted tc filters and
actions. Notifications will only be built after passing a check for
'rtnl_notify_needed()'.
For both Qdiscs and classes 'get' operations now call a dedicated
notification function as it was not possible to distinguish between
'create' and 'get' before. This distinction is necessary because 'get'
always send a notification.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231229132642.1489088-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bound actions always return '0' and as of today we rely on '0'
being returned in order to properly skip bound actions in
tcf_idr_insert_many. In order to further improve maintainability,
introduce the ACT_P_BOUND return code.
Actions are updated to return 'ACT_P_BOUND' instead of plain '0'.
tcf_idr_insert_many is then updated to check for 'ACT_P_BOUND'.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231229132642.1489088-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In function `tc_dump_tfilter`, the attributes array is parsed via
tcf_tfilter_dump_policy which only describes TCA_DUMP_FLAGS. However,
the NLA TCA_CHAIN is also accessed with `nla_get_u32`.
The access to TCA_CHAIN is introduced in commit 5bc1701881 ("net:
sched: introduce multichain support for filters") and no nla_policy is
provided for parsing at that point. Later on, tcf_tfilter_dump_policy is
introduced in commit f8ab1807a9 ("net: sched: introduce terse dump
flag") while still ignoring the fact that TCA_CHAIN needs a check. This
patch does that by complementing the policy to allow the access
discussed here can be safe as other cases just choose rtm_tca_policy as
the parsing policy.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts. Buh-bye.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
m->data needs to be freed when em_text_destroy is called.
Fixes: d675c989ed ("[PKT_SCHED]: Packet classification based on textsearch (ematch)")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
So far the mirred action has dealt with syntax that handles
mirror/redirection for netdev. A matching packet is redirected or mirrored
to a target netdev.
In this patch we enable mirred to mirror to a tc block as well.
IOW, the new syntax looks as follows:
... mirred <ingress | egress> <mirror | redirect> [index INDEX] < <blockid BLOCKID> | <dev <devname>> >
Examples of mirroring or redirecting to a tc block:
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 192.168.0.0/16 action mirred egress mirror blockid 22
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 10.10.10.10/32 action mirred egress redirect blockid 22
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The act of replacing a device will be repeated by the init logic for the
block ID in the patch that allows mirred to a block. Therefore we
encapsulate this functionality in a function (tcf_mirred_replace_dev) so
that we can reuse it and avoid code repetition.
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparation for adding block ID to mirred, separate the part of
mirred that redirect/mirrors to a dev into a specific function so that it
can be called by blockcast for each dev.
Also improve readability. Eg. rename use_reinsert to dont_clone and skb2
to skb_to_send.
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The datapath can now find the block of the port in which the packet arrived
at.
In the next patch we show a possible usage of this patch in a new
version of mirred that multicasts to all ports except for the port in
which the packet arrived on.
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit makes tc blocks track which ports have been added to them.
And, with that, we'll be able to use this new information to send
packets to the block's ports. Which will be done in the patch #3 of this
series.
Suggested-by: Jiri Pirko <jiri@nvidia.com>
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Continue expanding Daniel's patch by adding new skb drop reasons that
are idiosyncratic to TC.
More specifically:
- SKB_DROP_REASON_TC_COOKIE_ERROR: An error occurred whilst
processing a tc ext cookie.
- SKB_DROP_REASON_TC_CHAIN_NOTFOUND: tc chain lookup failed.
- SKB_DROP_REASON_TC_RECLASSIFY_LOOP: tc exceeded max reclassify loop
iterations
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move drop_reason from struct tcf_result to skb cb - more specifically to
struct tc_skb_cb. With that, we'll be able to also set the drop reason for
the remaining qdiscs (aside from clsact) that do not have access to
tcf_result when time comes to set the skb drop reason.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcf_idr_insert_many will replace the allocated -EBUSY pointer in
tcf_idr_check_alloc with the real action pointer, exposing it
to all operations. This operation is only needed when the action pointer
is created (ACT_P_CREATED). For actions which are bound to (returned 0),
the pointer already resides in the idr making such operation a nop.
Even though it's a nop, it's still not a cheap operation as internally
the idr code walks the idr and then does a replace on the appropriate slot.
So if the action was bound, better skip the idr replace entirely.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of relying only on the idrinfo->lock mutex for
bind/alloc logic, rely on a combination of rcu + mutex + atomics
to better scale the case where multiple rtnl-less filters are
binding to the same action object.
Action binding happens when an action index is specified explicitly and
an action exists which such index exists. Example:
tc actions add action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter ls ...
filter protocol all pref 49150 matchall chain 0 filter protocol all pref 49150 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49151 matchall chain 0 filter protocol all pref 49151 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49152 matchall chain 0 filter protocol all pref 49152 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
When no index is specified, as before, grab the mutex and allocate
in the idr the next available id. In this version, as opposed to before,
it's simplified to store the -EBUSY pointer instead of the previous
alloc + replace combination.
When an index is specified, rely on rcu to find if there's an object in
such index. If there's none, fallback to the above, serializing on the
mutex and reserving the specified id. If there's one, it can be an -EBUSY
pointer, in which case we just try again until it's an action, or an action.
Given the rcu guarantees, the action found could be dead and therefore
we need to bump the refcount if it's not 0, handling the case it's
in fact 0.
As bind and the action refcount are already atomics, these increments can
happen without the mutex protection while many tcf_idr_check_alloc race
to bind to the same action instance.
In case binding encounters a parallel delete or add, it will return
-EAGAIN in order to try again. Both filter and action apis already
have the retry machinery in-place. In case it's an unlocked filter it
retries under the rtnl lock.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of today tc-filter/chain events are unconditionally built and sent to
RTNLGRP_TC. As with the introduction of rtnl_notify_needed we can check
before-hand if they are really needed. This will help to alleviate
system pressure when filters are concurrently added without the rtnl
lock as in tc-flower.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-8-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This argument is never called while set to true, so remove it as there's
no need for it.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231208192847.714940-7-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of today tc-action events are unconditionally built and sent to
RTNLGRP_TC. As with the introduction of rtnl_notify_needed we can check
before-hand if they are really needed.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231208192847.714940-6-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use max() in a couple of places that are open coding it with the
ternary operator.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231208192847.714940-5-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The actions array is contiguous, so stop processing whenever a NULL
is found. This is already the assumption for tcf_action_destroy[1],
which is called from tcf_actions_init.
[1] https://elixir.bootlin.com/linux/v6.7-rc3/source/net/sched/act_api.c#L1115
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ops array is contiguous, so stop processing whenever a NULL is found
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In tcf_action_add, when putting the reference for the bound actions
it assigns NULLs to just created actions passing a non contiguous
array to tcf_action_put_many.
Refactor the code so the actions array is always contiguous.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the auxiliary macro tcf_act_for_each_action in all the
functions that expect a contiguous action array
Suggested-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
BYTES_PER_KBIT is defined in units.h, use that definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231128174813.394462-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Proper refcounts will always warn splat when something goes wrong,
be it underflow, saturation or object resurrection. As these are always
a source of bugs, use it in cls_u32 as a safeguard to prevent/catch issues.
Another benefit is that the refcount API self documents the code, making
clear when transitions to dead are expected.
For such an update we had to make minor adaptations on u32 to fit the refcount
API. First we set explicitly to '1' when objects are created, then the
objects are alive until a 1 -> 0 happens, which is then released appropriately.
The above made clear some redundant operations in the u32 code
around the root_ht handling that were removed. The root_ht is created
with a refcnt set to 1. Then when it's associated with tcf_proto it increments the refcnt to 2.
Throughout the entire code the root_ht is an exceptional case and can never be referenced,
therefore the refcnt never incremented/decremented.
Its lifetime is always bound to tcf_proto, meaning if you delete tcf_proto
the root_ht is deleted as well. The code made up for the fact that root_ht refcnt is 2 and did
a double decrement to free it, which is not a fit for the refcount API.
Even though refcount_t is implemented using atomics, we should observe
a negligible control plane impact.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231114141856.974326-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no hardware supporting ct helper offload. However, prior to this
patch, a flower filter with a helper in the ct action can be successfully
set into the HW, for example (eth1 is a bnxt NIC):
# tc qdisc add dev eth1 ingress_block 22 ingress
# tc filter add block 22 proto ip flower skip_sw ip_proto tcp \
dst_port 21 ct_state -trk action ct helper ipv4-tcp-ftp
# tc filter show dev eth1 ingress
filter block 22 protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
dst_port 21
ct_state -trk
skip_sw
in_hw in_hw_count 1 <----
action order 1: ct zone 0 helper ipv4-tcp-ftp pipe
index 2 ref 1 bind 1
used_hw_stats delayed
This might cause the flower filter not to work as expected in the HW.
This patch avoids this problem by simply returning -EOPNOTSUPP in
tcf_ct_offload_act_setup() to not allow to offload flows with a helper
in act_ct.
Fixes: a21b06e731 ("net: sched: add helper support in act_ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/f8685ec7702c4a448a1371a8b34b43217b583b9d.1699898008.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The top syzbot report for networking (#14 for the entire kernel)
is the queue timeout splat. We kept it around for a long time,
because in real life it provides pretty strong signal that
something is wrong with the driver or the device.
Removing it is also likely to break monitoring for those who
track it as a kernel warning.
Nevertheless, WARN()ings are best suited for catching kernel
programming bugs. If a Tx queue gets starved due to a pause
storm, priority configuration, or other weirdness - that's
obviously a problem, but not a problem we can fix at
the kernel level.
Bite the bullet and convert the WARN() to a print.
Before:
NETDEV WATCHDOG: eni1np1 (netdevsim): transmit queue 0 timed out 1975 ms
WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:525 dev_watchdog+0x39e/0x3b0
[... completely pointless stack trace of a timer follows ...]
Now:
netdevsim netdevsim1 eni1np1: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 1769 ms
Alternatively we could mark the drivers which syzbot has
learned to abuse as "print-instead-of-WARN" selectively.
Reported-by: syzbot+d55372214aff0faa1f1f@syzkaller.appspotmail.com
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Referenced commit doesn't always set iifidx when offloading the flow to
hardware. Fix the following cases:
- nf_conn_act_ct_ext_fill() is called before extension is created with
nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with
unspecified iifidx when connection is offloaded after only single
original-direction packet has been processed by tc data path. Always fill
the new nf_conn_act_ct_ext instance after creating it in
nf_conn_act_ct_ext_add().
- Offloading of unidirectional UDP NEW connections is now supported, but ct
flow iifidx field is not updated when connection is promoted to
bidirectional which can result reply-direction iifidx to be zero when
refreshing the connection. Fill in the extension and update flow iifidx
before calling flow_offload_refresh().
Fixes: 9795ded7f9 ("net/sched: act_ct: Fill offloading tuple iifidx")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 6a9bad0069 ("net/sched: act_ct: offload UDP NEW connections")
Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0).
Fixed by disambiguating a legit error from a verdict with a bogus drop_reason
[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
<IRQ>
__netif_receive_skb_core.constprop.0+0x837/0xdb0
__netif_receive_skb_one_core+0x3c/0x70
process_backlog+0x95/0x130
__napi_poll+0x25/0x1b0
net_rx_action+0x29b/0x310
__do_softirq+0xc0/0x29b
do_softirq+0x43/0x60
</IRQ>
[2]
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1
Ido reported:
[...] getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0). [...]
[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
<IRQ>
__netif_receive_skb_core.constprop.0+0x837/0xdb0
__netif_receive_skb_one_core+0x3c/0x70
process_backlog+0x95/0x130
__napi_poll+0x25/0x1b0
net_rx_action+0x29b/0x310
__do_softirq+0xc0/0x29b
do_softirq+0x43/0x60
</IRQ>
[2]
#!/bin/bash
ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1
What happens is that inside most classifiers the tcf_result is copied over
from a filter template e.g. *res = f->res which then implicitly overrides
the prior SKB_DROP_REASON_TC_{INGRESS,EGRESS} default drop code which was
set via sch_handle_{ingress,egress}() for kfree_skb_reason().
Commit text above copied verbatim from Daniel. The general idea of the patch
is not very different from what Ido originally posted but instead done at the
cls_api codepath.
Fixes: 54a59aed39 ("net, sched: Make tc-related drop reason more flexible")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/netdev/ZTjY959R+AFXf3Xy@shredder
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Fill in missing MODULE_DESCRIPTIONs for TC qdiscs.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-4-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Fill in missing MODULE_DESCRIPTIONs for TC classifiers.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-3-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Gate is the only TC action that is lacking such description.
Fill MODULE_DESCRIPTION for Gate TC ACTION.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20231027155045.46291-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct nla_policy is usually constant itself, but unless
we make the ranges inside constant we won't be able to
make range structs const. The ranges are not modified
by the core.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231025162204.132528-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current nf_flow_is_outdated() implementation considers any flow table flow
which state diverged from its underlying CT connection status for teardown
which can be problematic in the following cases:
- Flow has never been offloaded to hardware in the first place either
because flow table has hardware offload disabled (flag
NF_FLOWTABLE_HW_OFFLOAD is not set) or because it is still pending on 'add'
workqueue to be offloaded for the first time. The former is incorrect, the
later generates excessive deletions and additions of flows.
- Flow is already pending to be updated on the workqueue. Tearing down such
flows will also generate excessive removals from the flow table, especially
on highly loaded system where the latency to re-offload a flow via 'add'
workqueue can be quite high.
When considering a flow for teardown as outdated verify that it is both
offloaded to hardware and doesn't have any pending updates.
Fixes: 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded
unreplied tuple"), flowtable GC pushes back flows with IPS_SEEN_REPLY
back to classic path in every run, ie. every second. This is because of
a new check for NF_FLOW_HW_ESTABLISHED which is specific of sched/act_ct.
In Netfilter's flowtable case, NF_FLOW_HW_ESTABLISHED never gets set on
and IPS_SEEN_REPLY is unreliable since users decide when to offload the
flow before, such bit might be set on at a later stage.
Fix it by adding a custom .gc handler that sched/act_ct can use to
deal with its NF_FLOW_HW_ESTABLISHED bit.
Fixes: 41f2c7c342 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reported-by: Vladimir Smelhaus <vl.sm@email.cz>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
net->ct.labels_used was meant to convey 'number of ip/nftables rules
that need the label extension allocated'.
act_ct enables this for each net namespace, which voids all attempts
to avoid ct->ext allocation when possible.
Move this increment to the control plane to request label extension
space allocation only when its needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A helper function for printing non-work-conserving alarms is added in
commit b00355db3f ("pkt_sched: sch_hfsc: sch_htb: Add non-work-conserving
warning handler."). In this commit, use qdisc_warn_nonwc() instead of
WARN_ONCE() to handle the non-work-conserving warning in qfq Qdisc.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20231023064729.370649-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If packets of a TCP flows take the fast path, we need to make sure
sk->sk_pacing_status is set to SK_PACING_FQ otherwise TCP might
fallback to internal pacing, which is not optimal.
Fixes: 076433bd78 ("net_sched: sch_fq: add fast path for mostly idle qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231020201254.732527-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A last minute change went wrong.
We need to look for a packet in all 3 bands, not only two.
Fixes: 29f834aa32 ("net_sched: sch_fq: add 3 bands and WRR scheduling")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202310201422.a22b0999-oliver.sang@intel.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Dave Taht <dave.taht@gmail.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231020200053.675951-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Theune says:
I upgraded from 6.1.38 to 6.1.55 this morning and it broke my traffic shaping script,
leaving me with a non-functional uplink on a remote router.
A 'rt' curve cannot be used as a inner curve (parent class), but we were
allowing such configurations since the qdisc was introduced. Such
configurations would trigger a UAF as Budimir explains:
The parent will have vttree_insert() called on it in init_vf(),
but will not have vttree_remove() called on it in update_vf()
because it does not have the HFSC_FSC flag set.
The qdisc always assumes that inner classes have the HFSC_FSC flag set.
This is by design as it doesn't make sense 'qdisc wise' for an 'rt'
curve to be an inner curve.
Budimir's original patch disallows users to add classes with a 'rt'
parent, but this is too strict as it breaks users that have been using
'rt' as a inner class. Another approach, taken by this patch, is to
upgrade the inner 'rt' into a 'sc', warning the user in the process.
It avoids the UAF reported by Budimir while also being more permissive
to bad scripts/users/code using 'rt' as a inner class.
Users checking the `tc class ls [...]` or `tc class get [...]` dumps would
observe the curve change and are potentially breaking with this change.
v1->v2: https://lore.kernel.org/all/20231013151057.2611860-1-pctammela@mojatatu.com/
- Correct 'Fixes' tag and merge with revert (Jakub)
Cc: Christian Theune <ct@flyingcircus.io>
Cc: Budimir Markovic <markovicbudimir@gmail.com>
Fixes: b3d26c5702 ("net/sched: sch_hfsc: Ensure inner classes have fsc curve")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231017143602.3191556-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an initial user for the newly added tcf_set_drop_reason() helper to set the
drop reason for internal errors leading to TC_ACT_SHOT inside {__,}tcf_classify().
Right now this only adds a very basic SKB_DROP_REASON_TC_ERROR as a generic
fallback indicator to mark drop locations. Where needed, such locations can be
converted to more specific codes, for example, when hitting the reclassification
limit, etc.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/r/20231009092655.22025-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c ("bpf: Fix verifier log for async callback return values")
a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit d61491a51f ("net/sched: cls_u32: Replace one-element array
with flexible-array member") incorrecly replaced an instance of
`sizeof(*tp_c)` with `struct_size(tp_c, hlist->ht, 1)`. This results
in a an over-allocation of 8 bytes.
This change is wrong because `hlist` in `struct tc_u_common` is a
pointer:
net/sched/cls_u32.c:
struct tc_u_common {
struct tc_u_hnode __rcu *hlist;
void *ptr;
int refcnt;
struct idr handle_idr;
struct hlist_node hnode;
long knodes;
};
So, the use of `struct_size()` makes no sense: we don't need to allocate
any extra space for a flexible-array member. `sizeof(*tp_c)` is just fine.
So, `struct_size(tp_c, hlist->ht, 1)` translates to:
sizeof(*tp_c) + sizeof(tp_c->hlist->ht) ==
sizeof(struct tc_u_common) + sizeof(struct tc_u_knode *) ==
144 + 8 == 0x98 (byes)
^^^
|
unnecessary extra
allocation size
$ pahole -C tc_u_common net/sched/cls_u32.o
struct tc_u_common {
struct tc_u_hnode * hlist; /* 0 8 */
void * ptr; /* 8 8 */
int refcnt; /* 16 4 */
/* XXX 4 bytes hole, try to pack */
struct idr handle_idr; /* 24 96 */
/* --- cacheline 1 boundary (64 bytes) was 56 bytes ago --- */
struct hlist_node hnode; /* 120 16 */
/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
long int knodes; /* 136 8 */
/* size: 144, cachelines: 3, members: 6 */
/* sum members: 140, holes: 1, sum holes: 4 */
/* last cacheline: 16 bytes */
};
And with `sizeof(*tp_c)`, we have:
sizeof(*tp_c) == sizeof(struct tc_u_common) == 144 == 0x90 (bytes)
which is the correct and original allocation size.
Fix this issue by replacing `struct_size(tp_c, hlist->ht, 1)` with
`sizeof(*tp_c)`, and avoid allocating 8 too many bytes.
The following difference in binary output is expected and reflects the
desired change:
| net/sched/cls_u32.o
| @@ -6148,7 +6148,7 @@
| include/linux/slab.h:599
| 2cf5: mov 0x0(%rip),%rdi # 2cfc <u32_init+0xfc>
| 2cf8: R_X86_64_PC32 kmalloc_caches+0xc
|- 2cfc: mov $0x98,%edx
|+ 2cfc: mov $0x90,%edx
Reported-by: Alejandro Colomar <alx@kernel.org>
Closes: https://lore.kernel.org/lkml/09b4a2ce-da74-3a19-6961-67883f634d98@kernel.org/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct disttable.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20231003231823.work.684-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before Google adopted FQ for its production servers,
we had to ensure AF4 packets would get a higher share
than BE1 ones.
As discussed this week in Netconf 2023 in Paris, it is time
to upstream this for public use.
After this patch FQ can replace pfifo_fast, with the following
differences :
- FQ uses WRR instead of strict prio, to avoid starvation of
low priority packets.
- We make sure each band/prio tracks its own usage against sch->limit.
This was done to make sure flood of low priority packets would not
prevent AF4 packets to be queued. Contributed by Willem.
- priomap can be changed, if needed (default value are the ones
coming from pfifo_fast).
In this patch, we set default band weights so that :
- high prio (band=0) packets get 90% of the bandwidth
if they compete with low prio (band=2) packets.
- high prio packets get 75% of the bandwidth
if they compete with medium prio (band=1) packets.
Following patch in this series adds the possibility to tune
the per-band weights.
As we added many fields in 'struct fq_sched_data', we had
to make sure to have the first cache line read-mostly, and
avoid wasting precious cache lines.
More optimizations are possible but will be sent separately.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pfifo_fast prio2band[] is renamed to sch_default_prio2band[]
and exported because we want to share it in FQ.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that both enqueue() and dequeue() need to use ktime_get_ns(),
there is no point wasting 8 bytes in struct fq_sched_data.
This makes room for future fields. ;)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SO_MAX_PACING_RATE setsockopt() does not need to hold
the socket lock, because sk->sk_pacing_rate readers
can run fine if the value is changed by other threads,
after adding READ_ONCE() accessors.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a followup of 8bf43be799 ("net: annotate data-races
around sk->sk_priority").
sk->sk_priority can be read and written without holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FQ performs garbage collection at enqueue time, and only
if number of flows is above a given threshold, which
is hit after the qdisc has been used a bit.
Since an RB-tree traversal is needed to locate a flow,
it makes sense to perform gc all the time, to keep
rb-trees smaller.
This reduces by 50 % average storage costs in FQ,
and avoids 1 cache line miss at enqueue time when
fast path added in prior patch can not be used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCQ_F_CAN_BYPASS can be used by few qdiscs.
Idea is that if we queue a packet to an empty qdisc,
following dequeue() would pick it immediately.
FQ can not use the generic TCQ_F_CAN_BYPASS code,
because some additional checks need to be performed.
This patch adds a similar fast path to FQ.
Most of the time, qdisc is not throttled,
and many packets can avoid bringing/touching
at least four cache lines, and consuming 128bytes
of memory to store the state of a flow.
After this patch, netperf can send UDP packets about 13 % faster,
and pktgen goes 30 % faster (when FQ is in the way), on a fast NIC.
TCP traffic is also improved, thanks to a reduction of cache line misses.
I have measured a 5 % increase of throughput on a tcp_rr intensive workload.
tc -s -d qd sh dev eth1
...
qdisc fq 8004: parent 1:2 limit 10000p flow_limit 100p buckets 1024
orphan_mask 1023 quantum 3028b initial_quantum 15140b low_rate_threshold 550Kbit
refill_delay 40ms timer_slack 10us horizon 10s horizon_drop
Sent 5646784384 bytes 1985161 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
flows 122 (inactive 122 throttled 0)
gc 0 highprio 0 fastpath 659990 throttled 27762 latency 8.57us
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when one fq qdisc has no more packets to send, it can still
have some flows stored in its RR lists (q->new_flows & q->old_flows)
This was a design choice, but what is a bit disturbing is that
the inactive_flows counter does not include the count of empty flows
in RR lists.
As next patch needs to know better if there are active flows,
this change makes inactive_flows exact.
Before the patch, following command on an empty qdisc could have returned:
lpaa17:~# tc -s -d qd sh dev eth1 | grep inactive
flows 1322 (inactive 1316 throttled 0)
flows 1330 (inactive 1325 throttled 0)
flows 1193 (inactive 1190 throttled 0)
flows 1208 (inactive 1202 throttled 0)
After the patch, we now have:
lpaa17:~# tc -s -d qd sh dev eth1 | grep inactive
flows 1322 (inactive 1322 throttled 0)
flows 1330 (inactive 1330 throttled 0)
flows 1193 (inactive 1193 throttled 0)
flows 1208 (inactive 1208 throttled 0)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use netlink extended ack and parsing policies to return more meaningful
errors instead of the relying solely on errnos.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 1202cdd66531("Remove DECnet support from kernel") has been
merged, all callers pass in the initial_ref value of 1 when they call
dst_alloc(). Therefore, remove initial_ref when the dst_alloc() is
declared and replace initial_ref with 1 in dst_alloc().
Also when all callers call dst_init(), the value of initial_ref is 1.
Therefore, remove the input parameter initial_ref of the dst_init() and
replace initial_ref with the value 1 in dst_init.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230911125045.346390-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
HFSC assumes that inner classes have an fsc curve, but it is currently
possible for classes without an fsc curve to become parents. This leads
to bugs including a use-after-free.
Don't allow non-root classes without HFSC_FSC to become parents.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230824084905.422-1-markovicbudimir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_getsockopt() runs locklessly. This means sk->sk_lingertime
can be read while other threads are changing its value.
Other reads also happen without socket lock being held,
and must be annotated.
Remove preprocessor logic using BITS_PER_LONG, compilers
are smart enough to figure this by themselves.
v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning
(Jakub)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use prandom_u32_state() instead of get_random_u32() to generate
the correlated loss events of netem.
Signed-off-by: François Michel <francois.michel@uclouvain.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230815092348.1449179-4-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use prandom_u32_state() instead of get_random_u32() to generate
the random loss events of netem. The state of the prng is part
of the prng attribute of struct netem_sched_data.
Signed-off-by: François Michel <francois.michel@uclouvain.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230815092348.1449179-3-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add prng attribute to struct netem_sched_data and
allows setting the seed of the PRNG through netlink
using the new TCA_NETEM_PRNG_SEED attribute.
The PRNG attribute is not actually used yet.
Signed-off-by: François Michel <francois.michel@uclouvain.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230815092348.1449179-2-francois.michel@uclouvain.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This makes a difference for the software scheduling mode, where
dev_queue->qdisc_sleeping is the same as the taprio root Qdisc itself,
but when we're talking about what Qdisc and stats get reported for a
traffic class, the root taprio isn't what comes to mind, but q->qdiscs[]
is.
To understand the difference, I've attempted to send 100 packets in
software mode through class 8001:5, and recorded the stats before and
after the change.
Here is before:
$ tc -s class show dev eth0
class taprio 8001:1 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
and here is after:
class taprio 8001:1 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 800d:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
The most glaring (and expected) difference is that before, all class
stats reported the global stats, whereas now, they really report just
the counters for that traffic class.
Finally, Pedro Tammela points out that there is a tc selftest which
checks specifically which handle do the child Qdiscs corresponding to
each class have. That's changing here - taprio no longer reports
tcm->tcm_info as the same handle "1:" as itself (the root Qdisc), but 0
(the handle of the default pfifo child Qdiscs). Since iproute2 does not
print a child Qdisc handle of 0, adjust the test's expected output.
Link: https://lore.kernel.org/netdev/3b83fcf6-a5e8-26fb-8c8a-ec34ec4c3342@mojatatu.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in commit af7b29b1de ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") - unlike
mqprio, taprio doesn't use q->qdiscs[] only as a temporary transport
between Qdisc_ops :: init() and Qdisc_ops :: attach().
Delete the comment, which is just stolen from mqprio, but there, the
usage patterns are a lot different, and this is nothing but confusing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is another stab at commit 1461d212ab ("net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"), later
reverted in commit af7b29b1de ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"").
I believe that the problems that caused the revert were fixed, and thus,
this change is identical to the original patch.
Its purpose is to properly reject attaching a software taprio child
qdisc to a software taprio parent. Because unoffloaded taprio currently
reports itself (the root Qdisc) as the return value from qdisc_leaf(),
then the process of attaching another taprio as child to a Qdisc class
of the root will just result in a Qdisc_ops :: change() call for the
root. Whereas that's not we want. We want Qdisc_ops :: init() to be
called for the taprio child, in order to give the taprio child a chance
to check whether its sch->parent is TC_H_ROOT or not (and reject this
configuration).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Normally, Qdiscs have one reference on them held by their owner and one
held for each TXQ to which they are attached, however this is not the
case with the children of an offloaded taprio. Instead, the taprio qdisc
currently lives in the following fragile equilibrium.
In the software scheduling case, taprio attaches itself (the root Qdisc)
to all TXQs, thus having a refcount of 1 + the number of TX queues. In
this mode, the q->qdiscs[] children are not visible directly to the
Qdisc API. The lifetime of the Qdiscs from this private array lasts
until qdisc_destroy() -> taprio_destroy().
In the fully offloaded case, the root taprio has a refcount of 1, and
all child q->qdiscs[] also have a refcount of 1. The child q->qdiscs[]
are attached to the netdev TXQs directly and thus are visible to the
Qdisc API, however taprio loses a reference to them very early - during
qdisc_graft(parent==NULL) -> taprio_attach(). At that time, taprio frees
the q->qdiscs[] array to not leak memory, but interestingly, it does not
release a reference on these qdiscs because it doesn't effectively own
them - they are created by taprio but owned by the Qdisc core, and will
be freed by qdisc_graft(parent==NULL, new==NULL) -> qdisc_put(old) when
the Qdisc is deleted or when the child Qdisc is replaced with something
else.
My interest is to change this equilibrium such that taprio also owns a
reference on the q->qdiscs[] child Qdiscs for the lifetime of the root
Qdisc, including in full offload mode. I want this because I would like
taprio_leaf(), taprio_dump_class(), taprio_dump_class_stats() to have
insight into q->qdiscs[] for the software scheduling mode - currently
they look at dev_queue->qdisc_sleeping, which is, as mentioned, the same
as the root taprio.
The following set of changes is necessary:
- don't free q->qdiscs[] early in taprio_attach(), free it late in
taprio_destroy() for consistency with software mode. But:
- currently that's not possible, because taprio doesn't own a reference
on q->qdiscs[]. So hold that reference - once during the initial
attach() and once during subsequent graft() calls when the child is
changed.
- always keep track of the current child in q->qdiscs[], even for full
offload mode, so that we free in taprio_destroy() what we should, and
not something stale.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a simple code transformation with no intended behavior change,
just to make it absolutely clear that q->qdiscs[] is only attached to
the child taprio classes in full offload mode.
Right now we use the q->qdiscs[] variable in taprio_attach() for
software mode too, but that is quite confusing and avoidable. We use
it only to reach the netdev TX queue, but we could as well just use
netdev_get_tx_queue() for that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tc flower rules support to classify ESP/AH
packets matching SPI field.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add extack to warn that delete was rejected because
the class is still in use
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add extack to warn that delete was rejected because
the class is still in use
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add extack to warn that delete was rejected because
the class is still in use
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add extack to warn that delete was rejected because
the class is still in use
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'filter_cnt' counter is used to control a Qdisc class lifetime.
Each filter referecing this class by its id will eventually
increment/decrement this counter in their respective
'add/update/delete' routines.
As these operations are always serialized under rtnl lock, we don't
need an atomic type like 'refcount_t'.
It also means that we lose the overflow/underflow checks already
present in refcount_t, which are valuable to hunt down bugs
where the unsigned counter wraps around as it aids automated tools
like syzkaller to scream in such situations.
Wrap the open coded increment/decrement into helper functions and
add overflow checks to the operations.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When route4_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: 1109c00547 ("net: sched: RCU cls_route")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When fw_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: e35a8ee599 ("net: sched: fw use RCU")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When u32_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: de5df63228 ("net: sched: cls_u32 changes to knode must appear atomic to readers")
Reported-by: valis <sec@valis.email>
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.
We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().
The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.
syzkaller fed this input and 0x100000000 is cast to s32 to be 0.
@TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}
We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.
While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.
Also, we add a new tdc test case for this issue.
[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in:
Fixes: 4cfd5779bd ("taprio: Add support for txtime-assist mode")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Co-developed-by: Eric Dumazet <edumazet@google.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_getsockopt() runs without locks, we must add annotations
to sk->sk_rcvtimeo and sk->sk_sndtimeo.
In the future we might allow fetching these fields before
we lock the socket in TCP fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A match entry is uniquely identified with an "address" or "path" in the
form of: hashtable ID(12b):bucketid(8b):nodeid(12b).
When creating table match entries all of hash table id, bucket id and
node (match entry id) are needed to be either specified by the user or
reasonable in-kernel defaults are used. The in-kernel default for a table id is
0x800(omnipresent root table); for bucketid it is 0x0. Prior to this fix there
was none for a nodeid i.e. the code assumed that the user passed the correct
nodeid and if the user passes a nodeid of 0 (as Mingi Cho did) then that is what
was used. But nodeid of 0 is reserved for identifying the table. This is not
a problem until we dump. The dump code notices that the nodeid is zero and
assumes it is referencing a table and therefore references table struct
tc_u_hnode instead of what was created i.e match entry struct tc_u_knode.
Ming does an equivalent of:
tc filter add dev dummy0 parent 10: prio 1 handle 0x1000 \
protocol ip u32 match ip src 10.0.0.1/32 classid 10:1 action ok
Essentially specifying a table id 0, bucketid 1 and nodeid of zero
Tableid 0 is remapped to the default of 0x800.
Bucketid 1 is ignored and defaults to 0x00.
Nodeid was assumed to be what Ming passed - 0x000
dumping before fix shows:
~$ tc filter ls dev dummy0 parent 10:
filter protocol ip pref 1 u32 chain 0
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor -30591
Note that the last line reports a table instead of a match entry
(you can tell this because it says "ht divisor...").
As a result of reporting the wrong data type (misinterpretting of struct
tc_u_knode as being struct tc_u_hnode) the divisor is reported with value
of -30591. Ming identified this as part of the heap address
(physmap_base is 0xffff8880 (-30591 - 1)).
The fix is to ensure that when table entry matches are added and no
nodeid is specified (i.e nodeid == 0) then we get the next available
nodeid from the table's pool.
After the fix, this is what the dump shows:
$ tc filter ls dev dummy0 parent 10:
filter protocol ip pref 1 u32 chain 0
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 1 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 10:1 not_in_hw
match 0a000001/ffffffff at 12
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
Reported-by: Mingi Cho <mgcho.minic@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230726135151.416917-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nla_for_each_nested parsing in function mqprio_parse_nlattr() does
not check the length of the nested attribute. This can lead to an
out-of-attribute read and allow a malformed nlattr (e.g., length 0) to
be viewed as 8 byte integer and passed to priv->max_rate/min_rate.
This patch adds the check based on nla_len() when check the nla_type(),
which ensures that the length of these two attribute must equals
sizeof(u64).
Fixes: 4e8b86c062 ("mqprio: Introduce new hardware offload mode and shaper in mqprio")
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230725024227.426561-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current implementation of HTB offload returns the EINVAL error for
quantum parameter. This patch removes the error returning checks for
'quantum' parameter and populates its value to tc_htb_qopt_offload
structure such that driver can use the same.
Add quantum parameter check in mlx5 driver, as mlx5 devices are not capable
of supporting the quantum parameter when htb offload is used. Report error
if quantum parameter is set to a non-default value.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the following flows, the packets will be dropped if OVS TC offload is
enabled.
'ip,ct_state=-trk,in_port=1 actions=ct(zone=1)'
'ip,ct_state=+trk+new+rel,in_port=1 actions=ct(commit,zone=1)'
'ip,ct_state=+trk+new+rel,in_port=1 actions=ct(commit,zone=2),normal'
In the 1st flow, it finds the exp from the hashtable and removes it then
creates the ct with this exp in act_ct. However, in the 2nd flow it goes
to the OVS upcall at the 1st time. When the skb comes back from userspace,
it has to create the ct again without exp(the exp was removed last time).
With no 'rel' set in the ct, the 3rd flow can never get matched.
In OVS conntrack, it works around it by adding its own exp lookup function
ovs_ct_expect_find() where it doesn't remove the exp. Instead of creating
a real ct, it only updates its keys with the exp and its master info. So
when the skb comes back, the exp is still in the hashtable.
However, we can't do this trick in act_ct, as tc flower match is using a
real ct, and passing the exp and its master info to flower parsing via
tc_skb_cb is also not possible (tc_skb_cb size is not big enough).
The simple and clear fix is to not remove the exp at the 1st flow, namely,
not set IPS_CONFIRMED in tmpl when commit is not set in act_ct.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This work refactors and adds a lightweight extension ("tcx") to the tc BPF
ingress and egress data path side for allowing BPF program management based
on fds via bpf() syscall through the newly added generic multi-prog API.
The main goal behind this work which we also presented at LPC [0] last year
and a recent update at LSF/MM/BPF this year [3] is to support long-awaited
BPF link functionality for tc BPF programs, which allows for a model of safe
ownership and program detachment.
Given the rise in tc BPF users in cloud native environments, this becomes
necessary to avoid hard to debug incidents either through stale leftover
programs or 3rd party applications accidentally stepping on each others toes.
As a recap, a BPF link represents the attachment of a BPF program to a BPF
hook point. The BPF link holds a single reference to keep BPF program alive.
Moreover, hook points do not reference a BPF link, only the application's
fd or pinning does. A BPF link holds meta-data specific to attachment and
implements operations for link creation, (atomic) BPF program update,
detachment and introspection. The motivation for BPF links for tc BPF programs
is multi-fold, for example:
- From Meta: "It's especially important for applications that are deployed
fleet-wide and that don't "control" hosts they are deployed to. If such
application crashes and no one notices and does anything about that, BPF
program will keep running draining resources or even just, say, dropping
packets. We at FB had outages due to such permanent BPF attachment
semantics. With fd-based BPF link we are getting a framework, which allows
safe, auto-detachable behavior by default, unless application explicitly
opts in by pinning the BPF link." [1]
- From Cilium-side the tc BPF programs we attach to host-facing veth devices
and phys devices build the core datapath for Kubernetes Pods, and they
implement forwarding, load-balancing, policy, EDT-management, etc, within
BPF. Currently there is no concept of 'safe' ownership, e.g. we've recently
experienced hard-to-debug issues in a user's staging environment where
another Kubernetes application using tc BPF attached to the same prio/handle
of cls_bpf, accidentally wiping all Cilium-based BPF programs from underneath
it. The goal is to establish a clear/safe ownership model via links which
cannot accidentally be overridden. [0,2]
BPF links for tc can co-exist with non-link attachments, and the semantics are
in line also with XDP links: BPF links cannot replace other BPF links, BPF
links cannot replace non-BPF links, non-BPF links cannot replace BPF links and
lastly only non-BPF links can replace non-BPF links. In case of Cilium, this
would solve mentioned issue of safe ownership model as 3rd party applications
would not be able to accidentally wipe Cilium programs, even if they are not
BPF link aware.
Earlier attempts [4] have tried to integrate BPF links into core tc machinery
to solve cls_bpf, which has been intrusive to the generic tc kernel API with
extensions only specific to cls_bpf and suboptimal/complex since cls_bpf could
be wiped from the qdisc also. Locking a tc BPF program in place this way, is
getting into layering hacks given the two object models are vastly different.
We instead implemented the tcx (tc 'express') layer which is an fd-based tc BPF
attach API, so that the BPF link implementation blends in naturally similar to
other link types which are fd-based and without the need for changing core tc
internal APIs. BPF programs for tc can then be successively migrated from classic
cls_bpf to the new tc BPF link without needing to change the program's source
code, just the BPF loader mechanics for attaching is sufficient.
For the current tc framework, there is no change in behavior with this change
and neither does this change touch on tc core kernel APIs. The gist of this
patch is that the ingress and egress hook have a lightweight, qdisc-less
extension for BPF to attach its tc BPF programs, in other words, a minimal
entry point for tc BPF. The name tcx has been suggested from discussion of
earlier revisions of this work as a good fit, and to more easily differ between
the classic cls_bpf attachment and the fd-based one.
For the ingress and egress tcx points, the device holds a cache-friendly array
with program pointers which is separated from control plane (slow-path) data.
Earlier versions of this work used priority to determine ordering and expression
of dependencies similar as with classic tc, but it was challenged that for
something more future-proof a better user experience is required. Hence this
resulted in the design and development of the generic attach/detach/query API
for multi-progs. See prior patch with its discussion on the API design. tcx is
the first user and later we plan to integrate also others, for example, one
candidate is multi-prog support for XDP which would benefit and have the same
'look and feel' from API perspective.
The goal with tcx is to have maximum compatibility to existing tc BPF programs,
so they don't need to be rewritten specifically. Compatibility to call into
classic tcf_classify() is also provided in order to allow successive migration
or both to cleanly co-exist where needed given its all one logical tc layer and
the tcx plus classic tc cls/act build one logical overall processing pipeline.
tcx supports the simplified return codes TCX_NEXT which is non-terminating (go
to next program) and terminating ones with TCX_PASS, TCX_DROP, TCX_REDIRECT.
The fd-based API is behind a static key, so that when unused the code is also
not entered. The struct tcx_entry's program array is currently static, but
could be made dynamic if necessary at a point in future. The a/b pair swap
design has been chosen so that for detachment there are no allocations which
otherwise could fail.
The work has been tested with tc-testing selftest suite which all passes, as
well as the tc BPF tests from the BPF CI, and also with Cilium's L4LB.
Thanks also to Nikolay Aleksandrov and Martin Lau for in-depth early reviews
of this work.
[0] https://lpc.events/event/16/contributions/1353/
[1] https://lore.kernel.org/bpf/CAEf4BzbokCJN33Nw_kg82sO=xppXnKWEncGTWCTB9vGCmLB6pw@mail.gmail.com
[2] https://colocatedeventseu2023.sched.com/event/1Jo6O/tales-from-an-ebpf-programs-murder-mystery-hemanth-malla-guillaume-fournier-datadog
[3] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
[4] https://lore.kernel.org/bpf/20210604063116.234316-1-memxor@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If TCA_FLOWER_CLASSID is specified in the netlink message, the code will
call tcf_bind_filter. However, if any error occurs after that, the code
should undo this by calling tcf_unbind_filter.
Fixes: 77b9900ef5 ("tc: introduce Flower classifier")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.
Fix that by calling tcf_unbind_filter in errout_parms.
Fixes: eadb41489f ("net: cls_bpf: add support for marking filters as hardware-only")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case of an update, when TCA_U32_LINK is set, u32_set_parms will
decrement the refcount of the ht_down (struct tc_u_hnode) pointer
present in the older u32 filter which we are replacing. However, if
u32_replace_hw_knode errors out, the update command fails and that
ht_down pointer continues decremented. To fix that, when
u32_replace_hw_knode fails, check if ht_down's refcount was decremented
and undo the decrement.
Fixes: d34e3e1813 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms.
Fixes: d34e3e1813 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case an error occurred after mall_set_parms executed successfully, we
must undo the tcf_bind_filter call it issues.
Fix that by calling tcf_unbind_filter in err_replace_hw_filter label.
Fixes: ec2507d2a3 ("net/sched: cls_matchall: Fix error path")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lion says:
-------
In the QFQ scheduler a similar issue to CVE-2023-31436
persists.
Consider the following code in net/sched/sch_qfq.c:
static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
{
unsigned int len = qdisc_pkt_len(skb), gso_segs;
// ...
if (unlikely(cl->agg->lmax < len)) {
pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
cl->agg->lmax, len, cl->common.classid);
err = qfq_change_agg(sch, cl, cl->agg->class_weight, len);
if (err) {
cl->qstats.drops++;
return qdisc_drop(skb, sch, to_free);
}
// ...
}
Similarly to CVE-2023-31436, "lmax" is increased without any bounds
checks according to the packet length "len". Usually this would not
impose a problem because packet sizes are naturally limited.
This is however not the actual packet length, rather the
"qdisc_pkt_len(skb)" which might apply size transformations according to
"struct qdisc_size_table" as created by "qdisc_get_stab()" in
net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc.
A user may choose virtually any size using such a table.
As a result the same issue as in CVE-2023-31436 can occur, allowing heap
out-of-bounds read / writes in the kmalloc-8192 cache.
-------
We can create the issue with the following commands:
tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \
overhead 999999999 linklayer ethernet qfq
tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k
tc filter add dev $DEV parent 1: matchall classid 1:1
ping -I $DEV 1.1.1.2
This is caused by incorrectly assuming that qdisc_pkt_len() returns a
length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: Lion <nnamrec@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
25369891fc deletes a check for the case where no 'lmax' is
specified which 3037933448 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.
Fixes: 25369891fc ("net/sched: sch_qfq: refactor parsing of netlink parameters")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The kernel does not currently validate that both the minimum and maximum
ports of a port range are specified. This can lead user space to think
that a filter matching on a port range was successfully added, when in
fact it was not. For example, with a patched (buggy) iproute2 that only
sends the minimum port, the following commands do not return an error:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
# tc filter show dev swp1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
filter protocol ip pref 1 flower chain 0 handle 0x2
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 2 ref 1 bind 1
Fix by returning an error unless both ports are specified:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
Error: Both min and max source ports must be specified.
We have an error talking to the kernel
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
Error: Both min and max destination ports must be specified.
We have an error talking to the kernel
Fixes: 5c72299fba ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the event of a failure in tcf_change_indev(), fw_set_parms() will
immediately return an error after incrementing or decrementing
reference counter in tcf_bind_filter(). If attacker can control
reference counter to zero and make reference freed, leading to
use after free.
In order to prevent this, move the point of possible failure above the
point where the TC_FW_CLASSID is handled.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: M A Ramdhan <ramdhan@starlabs.sg>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Message-ID: <20230705161530.52003-1-ramdhan@starlabs.sg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The attribute TCA_PEDIT_PARMS_EX is not be included in pedit_policy and
one malicious user could fake a TCA_PEDIT_PARMS_EX whose length is
smaller than the intended sizeof(struct tc_pedit). Hence, the
dereference in tcf_pedit_init() could access dirty heap data.
static int tcf_pedit_init(...)
{
// ...
pattr = tb[TCA_PEDIT_PARMS]; // TCA_PEDIT_PARMS is included
if (!pattr)
pattr = tb[TCA_PEDIT_PARMS_EX]; // but this is not
// ...
parm = nla_data(pattr);
index = parm->index; // parm is able to be smaller than 4 bytes
// and this dereference gets dirty skb_buff
// data created in netlink_sendmsg
}
This commit adds TCA_PEDIT_PARMS_EX length in pedit_policy which avoid
the above case, just like the TCA_PEDIT_PARMS.
Fixes: 71d0ed7079 ("net/act_pedit: Support using offset relative to the conventional network headers")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230703110842.590282-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xtables relies on skb being owned by ip stack, i.e. with ipv4
check in place skb->cb is supposed to be IPCB.
I don't see an immediate problem (REJECT target cannot be used anymore
now that PRE/POSTROUTING hook validation has been fixed), but better be
safe than sorry.
A much better patch would be to either mark act_ipt as
"depends on BROKEN" or remove it altogether. I plan to do this
for -next in the near future.
This tc extension is broken in the sense that tc lacks an
equivalent of NF_STOLEN verdict.
With NF_STOLEN, target function takes complete ownership of skb, caller
cannot dereference it anymore.
ACT_STOLEN cannot be used for this: it has a different meaning, caller
is allowed to dereference the skb.
At this time NF_STOLEN won't be returned by any targets as far as I can
see, but this may change in the future.
It might be possible to work around this via list of allowed
target extensions known to only return DROP or ACCEPT verdicts, but this
is error prone/fragile.
Existing selftest only validates xt_LOG and act_ipt is restricted
to ipv4 so I don't think this action is used widely.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Netfilter targets make assumptions on the skb state, for example
iphdr is supposed to be in the linear area.
This is normally done by IP stack, but in act_ipt case no
such checks are made.
Some targets can even assume that skb_dst will be valid.
Make a minimum effort to check for this:
- Don't call the targets eval function for non-ipv4 skbs.
- Don't call the targets eval function for POSTROUTING
emulation when the skb has no dst set.
v3: use skb_protocol helper (Davide Caratti)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Looks like "tc" hard-codes "mangle" as the only supported table
name, but on kernel side there are no checks.
This is wrong. Not all xtables targets are safe to call from tc.
E.g. "nat" targets assume skb has a conntrack object assigned to it.
Normally those get called from netfilter nat core which consults the
nat table to obtain the address mapping.
"tc" userspace either sets PRE or POSTROUTING as hook number, but there
is no validation of this on kernel side, so update netlink policy to
reject bogus numbers. Some targets may assume skb_dst is set for
input/forward hooks, so prevent those from being used.
act_ipt uses the hook number in two places:
1. the state hook number, this is fine as-is
2. to set par.hook_mask
The latter is a bit mask, so update the assignment to make
xt_check_target() to the right thing.
Followup patch adds required checks for the skb/packet headers before
calling the targets evaluation function.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In blamed commit, I missed that get_dist_table() was allocating
memory using GFP_KERNEL, and acquiring qdisc lock to perform
the swap of newly allocated table with current one.
In this patch, get_dist_table() is allocating memory and
copy user data before we acquire the qdisc lock.
Then we perform swap operations while being protected by the lock.
Note that after this patch netem_change() no longer can do partial changes.
If an error is returned, qdisc conf is left unchanged.
Fixes: 2174a08db8 ("sch_netem: acquire qdisc lock in netem_change()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230622181503.2327695-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mingshuai Ren reports:
When a new chain is added by using tc, one soft lockup alarm will be
generated after delete the prio 0 filter of the chain. To reproduce
the problem, perform the following steps:
(1) tc qdisc add dev eth0 root handle 1: htb default 1
(2) tc chain add dev eth0
(3) tc filter del dev eth0 chain 0 parent 1: prio 0
(4) tc filter add dev eth0 chain 0 parent 1:
Fix the issue by accounting for additional reference to chains that are
explicitly created by RTM_NEWCHAIN message as opposed to implicitly by
RTM_NEWTFILTER message.
Fixes: 726d061286 ("net: sched: prevent insertion of new classifiers during chain flush")
Reported-by: Mingshuai Ren <renmingshuai@huawei.com>
Closes: https://lore.kernel.org/lkml/87legswvi3.fsf@nvidia.com/T/
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20230612093426.2867183-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized
in ingress_init() to point to net_device::miniq_ingress. ingress Qdiscs
access this per-net_device pointer in mini_qdisc_pair_swap(). Similar
for clsact Qdiscs and miniq_egress.
Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER
requests (thanks Hillf Danton for the hint), when replacing ingress or
clsact Qdiscs, for example, the old Qdisc ("@old") could access the same
miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"),
causing race conditions [1] including a use-after-free bug in
mini_qdisc_pair_swap() reported by syzbot:
BUG: KASAN: slab-use-after-free in mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
Write of size 8 at addr ffff888045b31308 by task syz-executor690/14901
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:319
print_report mm/kasan/report.c:430 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:536
mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
tcf_chain_head_change_item net/sched/cls_api.c:495 [inline]
tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:509
tcf_chain_tp_insert net/sched/cls_api.c:1826 [inline]
tcf_chain_tp_insert_unique net/sched/cls_api.c:1875 [inline]
tc_new_tfilter+0x1de6/0x2290 net/sched/cls_api.c:2266
...
@old and @new should not affect each other. In other words, @old should
never modify miniq_{in,e}gress after @new, and @new should not update
@old's RCU state.
Fixing without changing sch_api.c turned out to be difficult (please
refer to Closes: for discussions). Instead, make sure @new's first call
always happen after @old's last call (in {ingress,clsact}_destroy()) has
finished:
In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests,
and call qdisc_destroy() for @old before grafting @new.
Introduce qdisc_refcount_dec_if_one() as the counterpart of
qdisc_refcount_inc_nz() used for filter requests. Introduce a
non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check,
just like qdisc_put() etc.
Depends on patch "net/sched: Refactor qdisc_graft() for ingress and
clsact Qdiscs".
[1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under
TC_H_ROOT (no longer possible after commit c7cfbd1150 ("net/sched:
sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8
transmission queues:
Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2),
then adds a flower filter X to A.
Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and
b2) to replace A, then adds a flower filter Y to B.
Thread 1 A's refcnt Thread 2
RTM_NEWQDISC (A, RTNL-locked)
qdisc_create(A) 1
qdisc_graft(A) 9
RTM_NEWTFILTER (X, RTNL-unlocked)
__tcf_qdisc_find(A) 10
tcf_chain0_head_change(A)
mini_qdisc_pair_swap(A) (1st)
|
| RTM_NEWQDISC (B, RTNL-locked)
RCU sync 2 qdisc_graft(B)
| 1 notify_and_destroy(A)
|
tcf_block_release(A) 0 RTM_NEWTFILTER (Y, RTNL-unlocked)
qdisc_destroy(A) tcf_chain0_head_change(B)
tcf_chain0_head_change_cb_del(A) mini_qdisc_pair_swap(B) (2nd)
mini_qdisc_pair_swap(A) (3rd) |
... ...
Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to
its mini Qdisc, b1. Then, A calls mini_qdisc_pair_swap() again during
ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress
packets on eth0 will not find filter Y in sch_handle_ingress().
This is just one of the possible consequences of concurrently accessing
miniq_{in,e}gress pointers.
Fixes: 7a096d579e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops")
Fixes: 87f373921c ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Cc: Hillf Danton <hdanton@sina.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Grafting ingress and clsact Qdiscs does not need a for-loop in
qdisc_graft(). Refactor it. No functional changes intended.
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently UNREPLIED and UNASSURED connections are added to the nf flow
table. This causes the following connection packets to be processed
by the flow table which then skips conntrack_in(), and thus such the
connections will remain UNREPLIED and UNASSURED even if reply traffic
is then seen. Even still, the unoffloaded reply packets are the ones
triggering hardware update from new to established state, and if
there aren't any to triger an update and/or previous update was
missed, hardware can get out of sync with sw and still mark
packets as new.
Fix the above by:
1) Not skipping conntrack_in() for UNASSURED packets, but still
refresh for hardware, as before the cited patch.
2) Try and force a refresh by reply-direction packets that update
the hardware rules from new to established state.
3) Remove any bidirectional flows that didn't failed to update in
hardware for re-insertion as bidrectional once any new packet
arrives.
Fixes: 6a9bad0069 ("net/sched: act_ct: offload UDP NEW connections")
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/1686313379-117663-1-git-send-email-paulb@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support to the tc flower classifier to match based on fields in CFM
information elements like level and opcode.
tc filter add dev ens6 ingress protocol 802.1q \
flower vlan_id 698 vlan_ethtype 0x8902 cfm mdl 5 op 46 \
action drop
Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The taprio Qdisc creates child classes per netdev TX queue, but
taprio_dump_class_stats() currently reports offload statistics per
traffic class. Traffic classes are groups of TXQs sharing the same
dequeue priority, so this is incorrect and we shouldn't be bundling up
the TXQ stats when reporting them, as we currently do in enetc.
Modify the API from taprio to drivers such that they report TXQ offload
stats and not TC offload stats.
There is no change in the UAPI or in the global Qdisc stats.
Fixes: 6c1adb650c ("net/sched: taprio: add netlink reporting for offload statistics counters")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
./net/sched/act_pedit.c:245:21-28: WARNING opportunity for kmemdup.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5478
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the event of a failure in tcf_change_indev(), u32_set_parms() will
immediately return without decrementing the recently incremented
reference counter. If this happens enough times, the counter will
rollover and the reference freed, leading to a double free which can be
used to do 'bad things'.
In order to prevent this, move the point of possible failure above the
point where the reference counter is incremented. Also save any
meaningful return values to be applied to the return data at the
appropriate point in time.
This issue was caught with KASAN.
Fixes: 705c709126 ("net: sched: cls_u32: no need to call tcf_exts_change for newly allocated struct")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As shown in [1], out-of-bounds access occurs in two cases:
1)when the qdisc of the taprio type is used to replace the previously
configured taprio, count and offset in tc_to_txq can be set to 0. In this
case, the value of *txq in taprio_next_tc_txq() will increases
continuously. When the number of accessed queues exceeds the number of
queues on the device, out-of-bounds access occurs.
2)When packets are dequeued, taprio can be deleted. In this case, the tc
rule of dev is cleared. The count and offset values are also set to 0. In
this case, out-of-bounds access is also caused.
Now the restriction on the queue number is added.
[1] https://groups.google.com/g/syzkaller-bugs/c/_lYOKgkBVMg
Fixes: 2f530df76c ("net/sched: taprio: give higher priority to higher TCs in software dequeue mode")
Reported-by: syzbot+04afcb3d2c840447559a@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on skb->transport_header being set correctly, opt
instead to parse the L3 header length out of the L3 headers for both
IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a
bug if GRO is disabled, when GRO is disabled skb->transport_header is
set by __netif_receive_skb_core() to point to the L3 header, it's later
fixed by the upper protocol layers, but act_pedit will receive the SKB
before the fixups are completed. The existing behavior causes the
following to edit the L3 header if GRO is disabled instead of the UDP
header:
tc filter add dev eth0 ingress protocol ip flower ip_proto udp \
dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053
Also re-introduce a rate-limited warning if we were unable to extract
the header offset when using the 'ex' interface.
Fixes: 71d0ed7079 ("net/act_pedit: Support using offset relative to
the conventional network headers")
Signed-off-by: Max Tottenham <mtottenh@akamai.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305261541.N165u9TZ-lkp@intel.com/
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
try_module_get will be called in tcf_proto_lookup_ops. So module_put needs
to be called to drop the refcount if ops don't implement the required
function.
Fixes: 9f407f1768 ("net: sched: introduce chain templates")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes following sparse errors:
net/sched/act_police.c:360:28: warning: dereference of noderef expression
net/sched/act_police.c:362:45: warning: dereference of noderef expression
net/sched/act_police.c:362:45: warning: dereference of noderef expression
net/sched/act_police.c:368:28: warning: dereference of noderef expression
net/sched/act_police.c:370:45: warning: dereference of noderef expression
net/sched/act_police.c:370:45: warning: dereference of noderef expression
net/sched/act_police.c:376:45: warning: dereference of noderef expression
net/sched/act_police.c:376:45: warning: dereference of noderef expression
Fixes: d1967e495a ("net_sched: act_police: add 2 new attributes to support police 64bit rate and peakrate")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c,
thus should be declared in an include file.
This fixes the following sparse warning:
net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static?
Fixes: e331473fee ("net/sched: cls_api: add missing validation of netlink attributes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the following sparse warning:
net/sched/sch_api.c:2305:1: sparse: warning: symbol 'tc_skip_wrapper' was not declared. Should it be static?
No functional change intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total
size is 252 bytes(key->enc_opts.len = 252) then
key->enc_opts.len = opt->length = data_len / 4 = 0 when the third
TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This
bypasses the next bounds check and results in an out-of-bounds.
Fixes: 0a6e77784f ("net/sched: allow flower to match tunnel options")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Offloading drivers may report some additional statistics counters, some
of them even suggested by 802.1Q, like TransmissionOverrun.
In my opinion we don't have to limit ourselves to reporting counters
only globally to the Qdisc/interface, especially if the device has more
detailed reporting (per traffic class), since the more detailed info is
valuable for debugging and can help identifying who is exceeding its
time slot.
But on the other hand, some devices may not be able to report both per
TC and global stats.
So we end up reporting both ways, and use the good old ethtool_put_stat()
strategy to determine which statistics are supported by this NIC.
Statistics which aren't set are simply not reported to netlink. For this
reason, we need something dynamic (a nlattr nest) to be reported through
TCA_STATS_APP, and not something daft like the fixed-size and
inextensible struct tc_codel_xstats. A good model for xstats which are a
nlattr nest rather than a fixed struct seems to be cake.
# Global stats
$ tc -s qdisc show dev eth0 root
# Per-tc stats
$ tc -s class show dev eth0
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inspired from struct flow_cls_offload :: cmd, in order for taprio to be
able to report statistics (which is future work), it seems that we need
to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO)
multiplexing, and pass the command as part of the common portion of the
muxed structure.
Since we already have an "enable" variable in tc_taprio_qopt_offload,
refactor all drivers to check for "cmd" instead of "enable", and reject
every other command except "replace" and "destroy" - to be future proof.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In taprio_dump_class_stats() we don't need a reference to the root Qdisc
once we get the reference to the child corresponding to this traffic
class, so it's okay to overwrite "sch". But in a future patch we will
need the root Qdisc too, so create a dedicated "child" pointer variable
to hold the child reference. This also makes the code adhere to a more
conventional coding style.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the 'TCA_FLOWER_L2_MISS' netlink attribute that allows user space to
match on packets that encountered a layer 2 miss. The miss indication is
set as metadata in the tc skb extension by the bridge driver upon FDB or
MDB lookup miss and dissected by the flow dissector to the
'FLOW_DISSECTOR_KEY_META' key.
The use of this skb extension is guarded by the 'tc_skb_ext_tc' static
key. As such, enable / disable this key when filters that match on layer
2 miss are added / deleted.
Tested:
# cat tc_skb_ext_tc.py
#!/usr/bin/env -S drgn -s vmlinux
refcount = prog["tc_skb_ext_tc"].key.enabled.counter.value_()
print(f"tc_skb_ext_tc reference count is {refcount}")
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 0
# tc filter add dev swp1 egress proto all handle 101 pref 1 flower src_mac 00:11:22:33:44:55 action drop
# tc filter add dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:11:22:33:44:55 l2_miss true action drop
# tc filter add dev swp1 egress proto all handle 103 pref 3 flower src_mac 00:11:22:33:44:55 l2_miss false action drop
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 2
# tc filter replace dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:01:02:03:04:05 l2_miss false action drop
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 2
# tc filter del dev swp1 egress proto all handle 103 pref 3 flower
# tc filter del dev swp1 egress proto all handle 102 pref 2 flower
# tc filter del dev swp1 egress proto all handle 101 pref 1 flower
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq
The kernel reports NULL pointer dereference issue. The stack information
is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc
sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000
Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178
This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.
Fixes: 6ec1c69a8f ("net_sched: add classful multiqueue dummy scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, after creating an ingress (or clsact) Qdisc and grafting it
under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under
e.g. a TBF Qdisc:
$ ip link add ifb0 type ifb
$ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
$ tc qdisc add dev ifb0 clsact
$ tc qdisc link dev ifb0 handle ffff: parent 1:1
$ tc qdisc show dev ifb0
qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
qdisc clsact ffff: parent ffff:fff1 refcnt 2
^^^^^^^^
clsact's refcount has increased: it is now grafted under both
TC_H_CLSACT and 1:1.
ingress and clsact Qdiscs should only be used under TC_H_INGRESS
(TC_H_CLSACT). Prohibit regrafting them.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1
(TC_H_INGRESS, TC_H_CLSACT):
$ ip link add name ifb0 type ifb
$ tc qdisc add dev ifb0 parent ffff:fff1 htb
$ tc qdisc add dev ifb0 clsact
Error: Exclusivity flag on, cannot modify.
$ drgn
...
>>> ifb0 = netdev_get_by_name(prog, "ifb0")
>>> qdisc = ifb0.ingress_queue.qdisc_sleeping
>>> print(qdisc.ops.id.string_().decode())
htb
>>> qdisc.flags.value_() # TCQ_F_INGRESS
2
Only allow ingress and clsact Qdiscs under ffff:fff1. Return -EINVAL
for everything else. Make TCQ_F_INGRESS a static flag of ingress and
clsact Qdiscs.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clsact Qdiscs are only supposed to be created under TC_H_CLSACT (which
equals TC_H_INGRESS). Return -EOPNOTSUPP if 'parent' is not
TC_H_CLSACT.
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ingress Qdiscs are only supposed to be created under TC_H_INGRESS.
Return -EOPNOTSUPP if 'parent' is not TC_H_INGRESS, similar to
mq_init().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current implementation of HTB offload returns the EINVAL error
for unsupported parameters like prio and quantum. This patch removes
the error returning checks for 'prio' parameter and populates its
value to tc_htb_qopt_offload structure such that driver can use the
same.
Add prio parameter check in mlx5 driver, as mlx5 devices are not capable
of supporting the prio parameter when htb offload is used. Report error
if prio parameter is set to a non-default value.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Co-developed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When replacing a filter (i.e. 'fold' pointer is not NULL) the insertion of
new filter to idr is postponed until later in code since handle is already
provided by the user. However, the error handling code in fl_change()
always assumes that the new filter had been inserted into idr. If error
handler is reached when replacing existing filter it may remove it from idr
therefore making it unreachable for delete or dump afterwards. Fix the
issue by verifying that 'fold' argument wasn't provided by caller before
calling idr_remove().
Fixes: 08a0063df3 ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 32eff6bace.
Superseded by the following commit in this series.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are cases where the device is adminstratively UP, but operationally
down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
who's cable was pulled out, here is its ip link output:
5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
altname enp179s0f1np1
As you can see, it's administratively UP but operationally down.
In this case, sending a packet to this port caused a nasty kernel hang (so
nasty that we were unable to capture it). Aborting a transmit based on
operational status (in addition to administrative status) fixes the issue.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
v1->v2: Add fixes tag
v2->v3: Remove blank line between tags + add change log, suggested by Leon
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 08a0063df3 ("net/sched: flower: Move filter handle initialization
earlier") moved filter handle initialization but an assignment of
the handle to fnew->handle is done regardless of fold value. This is wrong
because if fold != NULL (so fold->handle == handle) no new handle is
allocated and passed handle is assigned to fnew->handle. Then if any
subsequent action in fl_change() fails then the handle value is
removed from IDR that is incorrect as we will have still valid old filter
instance with handle that is not present in IDR.
Fix this issue by moving the assignment so it is done only when passed
fold == NULL.
Prior the patch:
[root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be
Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances
exit: 123
exit: 0
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Command failed tmp/replace_6:1885
All test results:
1..1
not ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances
Command exited with 123, expected 0
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Command failed tmp/replace_6:1885
After the patch:
[root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be
Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances
All test results:
1..1
ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances
Fixes: 08a0063df3 ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230425140604.169881-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two parameters can be transformed into netlink policies and
validated while parsing the netlink message.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some error messages are still being printed to dmesg.
Since extack is available, provide error messages there.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some error messages are still being printed to dmesg.
Since extack is available, provide error messages there.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unbounded info messages in the pedit datapath can flood the printk
ring buffer quite easily depending on the action created.
As these messages are informational, usually printing some, not all,
is enough to bring attention to the real issue.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netlink parsing already validates the key 'htype'.
Remove the datapath check as it's redundant.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static key offsets should always be on 32 bit boundaries. Validate them on
create/update time for static offsets and move the datapath validation
for runtime offsets only.
iproute2 already errors out if a given offset and data size cannot be
packed to a 32 bit boundary. This change will make sure users which
create/update pedit instances directly via netlink also error out,
instead of finding out when packets are traversing.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have extack available when parsing 'ex' keys, so pass it to
tcf_pedit_keys_ex_parse and add more detailed error messages.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Transform two checks in the 'ex' key parsing into netlink policies
removing extra if checks.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel will print several warnings in a short period of time
when it stalls. Like this:
First warning:
[ 7100.097547] ------------[ cut here ]------------
[ 7100.097550] NETDEV WATCHDOG: eno2 (xxx): transmit queue 8 timed out
[ 7100.097571] WARNING: CPU: 8 PID: 0 at net/sched/sch_generic.c:467
dev_watchdog+0x260/0x270
...
Second warning:
[ 7147.756952] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 7147.756958] rcu: 24-....: (59999 ticks this GP) idle=546/1/0x400000000000000
softirq=367 3137/3673146 fqs=13844
[ 7147.756960] (t=60001 jiffies g=4322709 q=133381)
[ 7147.756962] NMI backtrace for cpu 24
...
We calculate that the transmit queue start stall should occur before
7095s according to watchdog_timeo, the rcu start stall at 7087s.
These two times are close together, it is difficult to confirm which
happened first.
To let users know the exact time the stall started, print msecs when
the transmit queue time out.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Function tcf_exts_init_ex() sets exts->miss_cookie_node ptr only
when use_action_miss is true so it assumes in other case that
the field is set to NULL by the caller. If not then the field
contains garbage and subsequent tcf_exts_destroy() call results
in a crash.
Ensure that the field .miss_cookie_node pointer is NULL when
use_action_miss parameter is false to avoid this potential scenario.
Fixes: 80cd22c35c ("net/sched: cls_api: Support hardware miss to tc action")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230420183634.1139391-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
if sch_fq is configured with "initial quantum" having values greater than
INT_MAX, the first assignment of "credit" does signed integer overflow to
a very negative value.
In this situation, the syzkaller script provided by Cristoph triggers the
CPU soft-lockup warning even with few sockets. It's not an infinite loop,
but "credit" wasn't probably meant to be minus 2Gb for each new flow.
Capping "initial quantum" to INT_MAX proved to fix the issue.
v2: validation of "initial quantum" is done in fq_policy, instead of open
coding in fq_change() _ suggested by Jakub Kicinski
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/377
Fixes: afe4fd0624 ("pkt_sched: fq: Fair Queue packet scheduler")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7b3a3c7e36d03068707a021760a194a8eb5ad41a.1682002300.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SCTP is not universally deployed, allow hiding its bit
from the skb.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Palash reports a UAF when using a modified version of syzkaller[1].
When 'tcf_exts_miss_cookie_base_alloc()' fails in 'tcf_exts_init_ex()'
a call to 'tcf_exts_destroy()' is made to free up the tcf_exts
resources.
In flower, a call to '__fl_put()' when 'tcf_exts_init_ex()' fails is made;
Then calling 'tcf_exts_destroy()', which triggers an UAF since the
already freed tcf_exts action pointer is lingering in the struct.
Before the offending patch, this was not an issue since there was no
case where the tcf_exts action pointer could linger. Therefore, restore
the old semantic by clearing the action pointer in case of a failure to
initialize the miss_cookie.
[1] https://github.com/cmu-pasta/linux-kernel-enriched-corpus
v1->v2: Fix compilation on configs without tc actions (kernel test robot)
Fixes: 80cd22c35c ("net/sched: cls_api: Support hardware miss to tc action")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device.
The MTU of the loopback device can be set up to 2^31-1.
As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX.
Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors.
The following reports a oob access:
[ 84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301
[ 84.583686]
[ 84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1
[ 84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 84.584644] Call Trace:
[ 84.584787] <TASK>
[ 84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
[ 84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
[ 84.585570] kasan_report (mm/kasan/report.c:538)
[ 84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255)
[ 84.587607] dev_qdisc_enqueue (net/core/dev.c:3776)
[ 84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212)
[ 84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228)
[ 84.589460] ip_output (net/ipv4/ip_output.c:430)
[ 84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606)
[ 84.590285] raw_sendmsg (net/ipv4/raw.c:649)
[ 84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.592084] __sys_sendto (net/socket.c:2142)
[ 84.593306] __x64_sys_sendto (net/socket.c:2150)
[ 84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.594070] RIP: 0033:0x7fe568032066
[ 84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
Code starting with the faulting instruction
===========================================
[ 84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066
[ 84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003
[ 84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010
[ 84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[ 84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001
[ 84.596218] </TASK>
[ 84.596295]
[ 84.596351] Allocated by task 291:
[ 84.596467] kasan_save_stack (mm/kasan/common.c:46)
[ 84.596597] kasan_set_track (mm/kasan/common.c:52)
[ 84.596725] __kasan_kmalloc (mm/kasan/common.c:384)
[ 84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974)
[ 84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938)
[ 84.597100] qdisc_create (net/sched/sch_api.c:1244)
[ 84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680)
[ 84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
[ 84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574)
[ 84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365)
[ 84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942)
[ 84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.598016] ____sys_sendmsg (net/socket.c:2501)
[ 84.598147] ___sys_sendmsg (net/socket.c:2557)
[ 84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586)
[ 84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.598688]
[ 84.598744] The buggy address belongs to the object at ffff88810f674000
[ 84.598744] which belongs to the cache kmalloc-8k of size 8192
[ 84.599135] The buggy address is located 2664 bytes to the right of
[ 84.599135] allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0)
[ 84.599544]
[ 84.599598] The buggy address belongs to the physical page:
[ 84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670
[ 84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000
[ 84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
[ 84.601009] page dumped because: kasan: bad access detected
[ 84.601187]
[ 84.601241] Memory state around the buggy address:
[ 84.601396] ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601620] ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602069] ^
[ 84.602243] ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602468] ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602693] ==================================================================
[ 84.602924] Disabling lock debugging due to kernel taint
Fixes: 3015f3d2a3 ("pkt_sched: enable QFQ to support TSO/GSO")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Gwangun Jung <exsociety@gmail.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a duplication of the FP adminStatus logic introduced for
tc-mqprio. Offloading is done through the tc_mqprio_qopt_offload
structure embedded within tc_taprio_qopt_offload. So practically, if a
device driver is written to treat the mqprio portion of taprio just like
standalone mqprio, it gets unified handling of frame preemption.
I would have reused more code with taprio, but this is mostly netlink
attribute parsing, which is hard to transform into generic code without
having something that stinks as a result. We have the same variables
with the same semantics, just different nlattr type values
(TCA_MQPRIO_TC_ENTRY=5 vs TCA_TAPRIO_ATTR_TC_ENTRY=12;
TCA_MQPRIO_TC_ENTRY_FP=2 vs TCA_TAPRIO_TC_ENTRY_FP=3, etc) and
consequently, different policies for the nest.
Every time nla_parse_nested() is called, an on-stack table "tb" of
nlattr pointers is allocated statically, up to the maximum understood
nlattr type. That array size is hardcoded as a constant, but when
transforming this into a common parsing function, it would become either
a VLA (which the Linux kernel rightfully doesn't like) or a call to the
allocator.
Having FP adminStatus in tc-taprio can be seen as addressing the 802.1Q
Annex S.3 "Scheduling and preemption used in combination, no HOLD/RELEASE"
and S.4 "Scheduling and preemption used in combination with HOLD/RELEASE"
use cases. HOLD and RELEASE events are emitted towards the underlying
MAC Merge layer when the schedule hits a Set-And-Hold-MAC or a
Set-And-Release-MAC gate operation. So within the tc-taprio UAPI space,
one can distinguish between the 2 use cases by choosing whether to use
the TC_TAPRIO_CMD_SET_AND_HOLD and TC_TAPRIO_CMD_SET_AND_RELEASE gate
operations within the schedule, or just TC_TAPRIO_CMD_SET_GATES.
A small part of the change is dedicated to refactoring the max_sdu
nlattr parsing to put all logic under the "if" that tests for presence
of that nlattr.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each
packet priority can be assigned to a "frame preemption status" value of
either "express" or "preemptible". Express priorities are transmitted by
the local device through the eMAC, and preemptible priorities through
the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge
layer).
The FP adminStatus is defined per packet priority, but 802.1Q clause
12.30.1.1.1 framePreemptionAdminStatus also says that:
| Priorities that all map to the same traffic class should be
| constrained to use the same value of preemption status.
It is impossible to ignore the cognitive dissonance in the standard
here, because it practically means that the FP adminStatus only takes
distinct values per traffic class, even though it is defined per
priority.
I can see no valid use case which is prevented by having the kernel take
the FP adminStatus as input per traffic class (what we do here).
In addition, this also enforces the above constraint by construction.
User space network managers which wish to expose FP adminStatus per
priority are free to do so; they must only observe the prio_tc_map of
the netdev (which presumably is also under their control, when
constructing the mqprio netlink attributes).
The reason for configuring frame preemption as a property of the Qdisc
layer is that the information about "preemptible TCs" is closest to the
place which handles the num_tc and prio_tc_map of the netdev. If the
UAPI would have been any other layer, it would be unclear what to do
with the FP information when num_tc collapses to 0. A key assumption is
that only mqprio/taprio change the num_tc and prio_tc_map of the netdev.
Not sure if that's a great assumption to make.
Having FP in tc-mqprio can be seen as an implementation of the use case
defined in 802.1Q Annex S.2 "Preemption used in isolation". There will
be a separate implementation of FP in tc-taprio, for the other use
cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the multiplexed ndo_setup_tc() model which lacks a first-class
struct netlink_ext_ack * argument, the only way to pass the netlink
extended ACK message down to the device driver is to embed it within the
offload structure.
Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload.
Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload
structure, and since device drivers might effectively reuse their mqprio
implementation for the mqprio portion of taprio, we make taprio set the
extack in both offload structures to point at the same netlink extack
message.
In fact, the taprio handling is a bit more tricky, for 2 reasons.
First is because the offload structure has a longer lifetime than the
extack structure. The driver is supposed to populate the extack
synchronously from ndo_setup_tc() and leave it alone afterwards.
To not have any use-after-free surprises, we zero out the extack pointer
when we leave taprio_enable_offload().
The second reason is because taprio does overwrite the extack message on
ndo_setup_tc() error. We need to switch to the weak form of setting an
extack message, which preserves a potential message set by the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ferenc reports that a combination of poor iproute2 defaults and obscure
cases where the kernel returns -EINVAL make it difficult to understand
what is wrong with this command:
$ ip link add veth0 numtxqueues 8 numrxqueues 8 type veth peer name veth1
$ tc qdisc add dev veth0 root mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7
RTNETLINK answers: Invalid argument
Hopefully with this patch, the cause is clearer:
Error: Device does not support hardware offload.
The kernel was (and still is) rejecting this because iproute2 defaults
to "hw 1" if this command line option is not specified.
Link: https://lore.kernel.org/netdev/ede5e9a2f27bf83bfb86d3e8c4ca7b34093b99e2.camel@inf.elte.hu/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink attribute parsing in mqprio is a minesweeper game, with many
options having the possibility of being passed incorrectly and the user
being none the wiser.
Try to make errors less sour by giving user space some information
regarding what went wrong.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 4e8b86c062 ("mqprio: Introduce new hardware offload mode and
shaper in mqprio"), the TCA_OPTIONS format of mqprio was extended to
contain a fixed portion (of size NLA_ALIGN(sizeof struct tc_mqprio_qopt))
and a variable portion of other nlattrs (in the TCA_MQPRIO_* type space)
following immediately afterwards.
In commit feb2cf3dcf ("net/sched: mqprio: refactor nlattr parsing to a
separate function"), we've moved the nlattr handling to a smaller
function, but yet, a small parse_attr() still remains, and the larger
mqprio_parse_nlattr() still does not have access to the beginning, and
the length, of the TCA_OPTIONS region containing these other nlattrs.
In a future change, the mqprio qdisc will need to iterate through this
nlattr region to discover other attributes, so eliminate parse_attr()
and add 2 variables in mqprio_parse_nlattr() which hold the beginning
and the length of the nlattr range.
We avoid the need to memset when nlattr_opt_len has insufficient length
by pre-initializing the table "tb".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the sake of readability, use the netlink payload helpers from
the 'nla_get_*()' family to parse the attributes.
tdc results:
1..5
ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues)
ok 2 453a - Delete nonexistent mqprio Qdisc
ok 3 5292 - Delete mqprio Qdisc twice
ok 4 45a9 - Add mqprio Qdisc to single-queue device
ok 5 2ba9 - Show mqprio class
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230404203449.1627033-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes typos in net/sched/* files.
Signed-off-by: Taichi Nishimura <awkrail01@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 places in the act api code are using 'TCA_' definitions where they
should be using 'TCA_ACT_', which is confusing for the reader, although
functionally they are equivalent.
Cc: Hangbin Liu <haliu@redhat.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcf_mirred_act() and tcf_mpls_act() can use skb_network_offset()
instead of relying on skb_mac_header().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to remove our use of skb_mac_header() in tx paths,
eg remove skb_reset_mac_header() from __dev_queue_xmit().
Idea is that ndo_start_xmit() can get the mac header
simply looking at skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In my previous commit 0349b8779c ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes: 0349b8779c ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 923b2e30dc.
This is not a correct fix as TCA_EXT_WARN_MSG is not a hierarchy to
TCA_ACT_TAB. I didn't notice the TC actions use different enum when adding
TCA_EXT_WARN_MSG. To fix the difference I will add a new WARN enum in
TCA_ROOT_MAX as Jamal suggested.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Smatch reports that 'ci' can be used uninitialized.
The current code ignores errno coming from tcf_idr_check_alloc, which
will lead to the incorrect usage of 'ci'. Handle the errno as it should.
Fixes: 288864effe ("net/sched: act_connmark: transition to percpu stats and rcu")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCA_EXT_WARN_MSG is currently sitting outside of the expected hierarchy
for the tc actions code. It should sit within TCA_ACT_TAB.
Fixes: 0349b8779c ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action sample ... index 1
tc filter add ... action pedit index 1
In the current code for act_sample this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..29
ok 1 9784 - Add valid sample action with mandatory arguments
ok 2 5c91 - Add valid sample action with mandatory arguments and continue control action
ok 3 334b - Add valid sample action with mandatory arguments and drop control action
ok 4 da69 - Add valid sample action with mandatory arguments and reclassify control action
ok 5 13ce - Add valid sample action with mandatory arguments and pipe control action
ok 6 1886 - Add valid sample action with mandatory arguments and jump control action
ok 7 7571 - Add sample action with invalid rate
ok 8 b6d4 - Add sample action with mandatory arguments and invalid control action
ok 9 a874 - Add invalid sample action without mandatory arguments
ok 10 ac01 - Add invalid sample action without mandatory argument rate
ok 11 4203 - Add invalid sample action without mandatory argument group
ok 12 14a7 - Add invalid sample action without mandatory argument group
ok 13 8f2e - Add valid sample action with trunc argument
ok 14 45f8 - Add sample action with maximum rate argument
ok 15 ad0c - Add sample action with maximum trunc argument
ok 16 83a9 - Add sample action with maximum group argument
ok 17 ed27 - Add sample action with invalid rate argument
ok 18 2eae - Add sample action with invalid group argument
ok 19 6ff3 - Add sample action with invalid trunc size
ok 20 2b2a - Add sample action with invalid index
ok 21 dee2 - Add sample action with maximum allowed index
ok 22 560e - Add sample action with cookie
ok 23 704a - Replace existing sample action with new rate argument
ok 24 60eb - Replace existing sample action with new group argument
ok 25 2cce - Replace existing sample action with new trunc argument
ok 26 59d1 - Replace existing sample action with new control argument
ok 27 0a6e - Replace sample action with invalid goto chain control
ok 28 3872 - Delete sample action with valid index
ok 29 a394 - Delete sample action with invalid index
Fixes: 5c5670fae4 ("net/sched: Introduce sample tc action")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action mpls ... index 1
tc filter add ... action mpls index 1
In the current code for act_mpls this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..53
ok 1 a933 - Add MPLS dec_ttl action with pipe opcode
ok 2 08d1 - Add mpls dec_ttl action with pass opcode
ok 3 d786 - Add mpls dec_ttl action with drop opcode
ok 4 f334 - Add mpls dec_ttl action with reclassify opcode
ok 5 29bd - Add mpls dec_ttl action with continue opcode
ok 6 48df - Add mpls dec_ttl action with jump opcode
ok 7 62eb - Add mpls dec_ttl action with trap opcode
ok 8 09d2 - Add mpls dec_ttl action with opcode and cookie
ok 9 c170 - Add mpls dec_ttl action with opcode and cookie of max length
ok 10 9118 - Add mpls dec_ttl action with invalid opcode
ok 11 6ce1 - Add mpls dec_ttl action with label (invalid)
ok 12 352f - Add mpls dec_ttl action with tc (invalid)
ok 13 fa1c - Add mpls dec_ttl action with ttl (invalid)
ok 14 6b79 - Add mpls dec_ttl action with bos (invalid)
ok 15 d4c4 - Add mpls pop action with ip proto
ok 16 91fb - Add mpls pop action with ip proto and cookie
ok 17 92fe - Add mpls pop action with mpls proto
ok 18 7e23 - Add mpls pop action with no protocol (invalid)
ok 19 6182 - Add mpls pop action with label (invalid)
ok 20 6475 - Add mpls pop action with tc (invalid)
ok 21 067b - Add mpls pop action with ttl (invalid)
ok 22 7316 - Add mpls pop action with bos (invalid)
ok 23 38cc - Add mpls push action with label
ok 24 c281 - Add mpls push action with mpls_mc protocol
ok 25 5db4 - Add mpls push action with label, tc and ttl
ok 26 7c34 - Add mpls push action with label, tc ttl and cookie of max length
ok 27 16eb - Add mpls push action with label and bos
ok 28 d69d - Add mpls push action with no label (invalid)
ok 29 e8e4 - Add mpls push action with ipv4 protocol (invalid)
ok 30 ecd0 - Add mpls push action with out of range label (invalid)
ok 31 d303 - Add mpls push action with out of range tc (invalid)
ok 32 fd6e - Add mpls push action with ttl of 0 (invalid)
ok 33 19e9 - Add mpls mod action with mpls label
ok 34 1fde - Add mpls mod action with max mpls label
ok 35 0c50 - Add mpls mod action with mpls label exceeding max (invalid)
ok 36 10b6 - Add mpls mod action with mpls label of MPLS_LABEL_IMPLNULL (invalid)
ok 37 57c9 - Add mpls mod action with mpls min tc
ok 38 6872 - Add mpls mod action with mpls max tc
ok 39 a70a - Add mpls mod action with mpls tc exceeding max (invalid)
ok 40 6ed5 - Add mpls mod action with mpls ttl
ok 41 77c1 - Add mpls mod action with mpls ttl and cookie
ok 42 b80f - Add mpls mod action with mpls max ttl
ok 43 8864 - Add mpls mod action with mpls min ttl
ok 44 6c06 - Add mpls mod action with mpls ttl of 0 (invalid)
ok 45 b5d8 - Add mpls mod action with mpls ttl exceeding max (invalid)
ok 46 451f - Add mpls mod action with mpls max bos
ok 47 a1ed - Add mpls mod action with mpls min bos
ok 48 3dcf - Add mpls mod action with mpls bos exceeding max (invalid)
ok 49 db7c - Add mpls mod action with protocol (invalid)
ok 50 b070 - Replace existing mpls push action with new ID
ok 51 95a9 - Replace existing mpls push action with new label, tc, ttl and cookie
ok 52 6cce - Delete mpls pop action
ok 53 d138 - Flush mpls actions
Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action pedit ... index 1
tc filter add ... action pedit index 1
In the current code for act_pedit this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..69
ok 1 319a - Add pedit action that mangles IP TTL
ok 2 7e67 - Replace pedit action with invalid goto chain
ok 3 377e - Add pedit action with RAW_OP offset u32
ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID)
ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16
ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID)
ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value
ok 8 2893 - Add pedit action with RAW_OP offset u8 quad
ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8
ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8
ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert
ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID)
ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set
ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value
ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value
ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value
ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value
ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value
ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value
ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value
ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value
ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value
ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value
ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value
ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src
ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst
ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst
ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID)
ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID)
ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence
ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID)
ok 32 ab06 - Add pedit action with LAYERED_OP eth add type
ok 33 918d - Add pedit action with LAYERED_OP eth invert src
ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst
ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type
ok 36 7588 - Add pedit action with LAYERED_OP ip set src
ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst
ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst
ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield
ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol
ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID)
ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set
ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields
ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields
ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos
ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence
ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos
ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence
ok 49 438e - Add pedit action with LAYERED_OP ip clear tos
ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence
ok 51 824a - Add pedit action with LAYERED_OP ip invert tos
ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence
ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport
ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code
ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID)
ok 56 815c - Add pedit action with LAYERED_OP ip6 set src
ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst
ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst
ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)
ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class
ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl
ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit
ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport
ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID)
ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set
ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields
ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport
ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1
ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2
Fixes: 71d0ed7079 ("net/act_pedit: Support using offset relative to the conventional network headers")
Fixes: f67169fef8 ("net/sched: act_pedit: fix WARN() in the traffic path")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_NET_CLS_ACT is disabled:
../net/sched/cls_api.c:141:13: warning: 'tcf_exts_miss_cookie_base_destroy' defined but not used [-Wunused-function]
141 | static void tcf_exts_miss_cookie_base_destroy(struct tcf_exts *exts)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Due to the way the code is structured, it is possible for a definition
of tcf_exts_miss_cookie_base_destroy() to be present without actually
being used. Its single callsite is in an '#ifdef CONFIG_NET_CLS_ACT'
block but a definition will always be present in the file. The version
of tcf_exts_miss_cookie_base_destroy() that actually does something
depends on CONFIG_NET_TC_SKB_EXT, so the stub function is used in both
CONFIG_NET_CLS_ACT=n and CONFIG_NET_CLS_ACT=y + CONFIG_NET_TC_SKB_EXT=n
configurations.
Move the call to tcf_exts_miss_cookie_base_destroy() in
tcf_exts_destroy() out of the '#ifdef CONFIG_NET_CLS_ACT', so that it
always appears used to the compiler, while not changing any behavior
with any of the various configuration combinations.
Fixes: 80cd22c35c ("net/sched: cls_api: Support hardware miss to tc action")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To support hardware miss to tc action in actions on the flower
classifier, implement the required getting of filter actions,
and setup filter exts (actions) miss by giving it the filter's
handle and actions.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To support miss to action during hardware offload the filter's
handle is needed when setting up the actions (tcf_exts_init()),
and before offloading.
Move filter handle initialization earlier.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For drivers to support partial offload of a filter's action list,
add support for action miss to specify an action instance to
continue from in sw.
CT action in particular can't be fully offloaded, as new connections
need to be handled in software. This imposes other limitations on
the actions that can be offloaded together with the CT action, such
as packet modifications.
Assign each action on a filter's action list a unique miss_cookie
which drivers can then use to fill action_miss part of the tc skb
extension. On getting back this miss_cookie, find the action
instance with relevant cookie and continue classifying from there.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct tc_action->act_cookie is a user defined cookie,
and the related struct flow_action_entry->act_cookie is
used as an handle similar to struct flow_cls_offload->cookie.
Rename tc_action->act_cookie to user_cookie, and
flow_action_entry->act_cookie to cookie so their names
would better fit their usage.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It makes no sense to keep randomly large max_sdu values, especially if
larger than the device's max_mtu. These are visible in "tc qdisc show".
Such a max_sdu is practically unlimited and will cause no packets for
that traffic class to be dropped on enqueue.
Just set max_sdu_dynamic to U32_MAX, which in the logic below causes
taprio to save a max_frm_len of U32_MAX and a max_sdu presented to user
space of 0 (unlimited).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The overhead specified in the size table comes from the user. With small
time intervals (or gates always closed), the overhead can be larger than
the max interval for that traffic class, and their difference is
negative.
What we want to happen is for max_sdu_dynamic to have the smallest
non-zero value possible (1) which means that all packets on that traffic
class are dropped on enqueue. However, since max_sdu_dynamic is u32, a
negative is represented as a large value and oversized dropping never
happens.
Use max_t with int to force a truncation of max_frm_len to no smaller
than dev->hard_header_len + 1, which in turn makes max_sdu_dynamic no
smaller than 1.
Fixes: fed87cc671 ("net/sched: taprio: automatically calculate queueMaxSDU based on TC gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
taprio_calculate_gate_durations() depends on netdev_get_num_tc() and
this returns 0. So it calculates the maximum gate durations for no
traffic class.
I had tested the blamed commit only with another patch in my tree, one
which in the end I decided isn't valuable enough to submit ("net/sched:
taprio: mask off bits in gate mask that exceed number of TCs").
The problem is that having this patch threw off my testing. By moving
the netdev_set_num_tc() call earlier, we implicitly gave to
taprio_calculate_gate_durations() the information it needed.
Extract only the portion from the unsubmitted change which applies the
mqprio configuration to the netdev earlier.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230130173145.475943-15-vladimir.oltean@nxp.com/
Fixes: a306a90c8f ("net/sched: taprio: calculate tc gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since act_pedit now has access to percpu counters, use the
tcf_action_inc_overlimit_qstats wrapper that will use the percpu
counter whenever they are available.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tc action act_gate was using shared stats, move it to percpu stats.
tdc results:
1..12
ok 1 5153 - Add gate action with priority and sched-entry
ok 2 7189 - Add gate action with base-time
ok 3 a721 - Add gate action with cycle-time
ok 4 c029 - Add gate action with cycle-time-ext
ok 5 3719 - Replace gate base-time action
ok 6 d821 - Delete gate action with valid index
ok 7 3128 - Delete gate action with invalid index
ok 8 7837 - List gate actions
ok 9 9273 - Flush gate actions
ok 10 c829 - Add gate action with duplicate index
ok 11 3043 - Add gate action with invalid index
ok 12 2930 - Add gate action with cookie
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tc action act_connmark was using shared stats and taking the per
action lock in the datapath. Improve it by using percpu stats and rcu.
perf before:
- 13.55% tcf_connmark_act
- 81.18% _raw_spin_lock
80.46% native_queued_spin_lock_slowpath
perf after:
- 2.85% tcf_connmark_act
tdc results:
1..15
ok 1 2002 - Add valid connmark action with defaults
ok 2 56a5 - Add valid connmark action with control pass
ok 3 7c66 - Add valid connmark action with control drop
ok 4 a913 - Add valid connmark action with control pipe
ok 5 bdd8 - Add valid connmark action with control reclassify
ok 6 b8be - Add valid connmark action with control continue
ok 7 d8a6 - Add valid connmark action with control jump
ok 8 aae8 - Add valid connmark action with zone argument
ok 9 2f0b - Add valid connmark action with invalid zone argument
ok 10 9305 - Add connmark action with unsupported argument
ok 11 71ca - Add valid connmark action and replace it
ok 12 5f8f - Add valid connmark action with cookie
ok 13 c506 - Replace connmark with invalid goto chain control
ok 14 6571 - Delete connmark action with valid index
ok 15 3426 - Delete connmark action with invalid index
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tc action act_nat was using shared stats and taking the per action
lock in the datapath. Improve it by using percpu stats and rcu.
perf before:
- 10.48% tcf_nat_act
- 81.83% _raw_spin_lock
81.08% native_queued_spin_lock_slowpath
perf after:
- 0.48% tcf_nat_act
tdc results:
1..27
ok 1 7565 - Add nat action on ingress with default control action
ok 2 fd79 - Add nat action on ingress with pipe control action
ok 3 eab9 - Add nat action on ingress with continue control action
ok 4 c53a - Add nat action on ingress with reclassify control action
ok 5 76c9 - Add nat action on ingress with jump control action
ok 6 24c6 - Add nat action on ingress with drop control action
ok 7 2120 - Add nat action on ingress with maximum index value
ok 8 3e9d - Add nat action on ingress with invalid index value
ok 9 f6c9 - Add nat action on ingress with invalid IP address
ok 10 be25 - Add nat action on ingress with invalid argument
ok 11 a7bd - Add nat action on ingress with DEFAULT IP address
ok 12 ee1e - Add nat action on ingress with ANY IP address
ok 13 1de8 - Add nat action on ingress with ALL IP address
ok 14 8dba - Add nat action on egress with default control action
ok 15 19a7 - Add nat action on egress with pipe control action
ok 16 f1d9 - Add nat action on egress with continue control action
ok 17 6d4a - Add nat action on egress with reclassify control action
ok 18 b313 - Add nat action on egress with jump control action
ok 19 d9fc - Add nat action on egress with drop control action
ok 20 a895 - Add nat action on egress with DEFAULT IP address
ok 21 2572 - Add nat action on egress with ANY IP address
ok 22 37f3 - Add nat action on egress with ALL IP address
ok 23 6054 - Add nat action on egress with cookie
ok 24 79d6 - Add nat action on ingress with cookie
ok 25 4b12 - Replace nat action with invalid goto chain control
ok 26 b811 - Delete nat action with valid index
ok 27 a521 - Delete nat action with invalid index
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The rsvp classifier has served us well for about a quarter of a century but has
has not been getting much maintenance attention due to lack of known users.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tcindex classifier has served us well for about a quarter of a century
but has not been getting much TLC due to lack of known users. Most recently
it has become easy prey to syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dsmark qdisc has served us well over the years for diffserv but has not
been getting much attention due to other more popular approaches to do diffserv
services. Most recently it has become a shooting target for syzkaller. For this
reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ATM qdisc has served us well over the years but has not been getting much
TLC due to lack of known users. Most recently it has become a shooting target
for syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While this amazing qdisc has served us well over the years it has not been
getting any tender love and care and has bitrotted over time.
It has become mostly a shooting target for syzkaller lately.
For this reason, we are retiring it. Goodbye CBQ - we loved you.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are currently two mechanisms for populating hardware stats:
1. Using flow_offload api to query the flow's statistics.
The api assumes that the same stats values apply to all
the flow's actions.
This assumption breaks when action drops or jumps over following
actions.
2. Using hw_action api to query specific action stats via a driver
callback method. This api assures the correct action stats for
the offloaded action, however, it does not apply to the rest of the
actions in the flow's actions array.
Extend the flow_offload stats callback to indicate that a per action
stats update is required.
Use the existing flow_offload_action api to query the action's hw stats.
In addition, currently the tc action stats utility only updates hw actions.
Reuse the existing action stats cb infrastructure to query any action
stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently a hardware action is uniquely identified by the <id, hw_index>
tuple. However, the id is set by the flow_act_setup callback and tc core
cannot enforce this, and it is possible that a future change could break
this. In addition, <id, hw_index> are not unique across network namespaces.
Uniquely identify the action by setting an action cookie by the tc core.
Use the unique action cookie to query the action's hardware stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of passing 6 stats related args, pass the flow_stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A single tc pedit action may be translated to multiple flow_offload
actions.
Offload only actions that translate to a single pedit command value.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the hw action stats update is called from tcf_exts_hw_stats_update,
when a tc filter is dumped, and from tcf_action_copy_stats, when a hw
action is dumped.
However, the tcf_action_copy_stats is also called from tcf_action_dump.
As such, the hw action stats update cb is called 3 times for every
tc flower filter dump.
Move the tc action hw stats update from tcf_action_copy_stats to
tcf_dump_walker to update the hw action stats when tc action is dumped.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tc action act_ctinfo was using shared stats, fix it to use percpu stats
since bstats_update() must be called with locks or with a percpu pointer argument.
tdc results:
1..12
ok 1 c826 - Add ctinfo action with default setting
ok 2 0286 - Add ctinfo action with dscp
ok 3 4938 - Add ctinfo action with valid cpmark and zone
ok 4 7593 - Add ctinfo action with drop control
ok 5 2961 - Replace ctinfo action zone and action control
ok 6 e567 - Delete ctinfo action with valid index
ok 7 6a91 - Delete ctinfo action with invalid index
ok 8 5232 - List ctinfo actions
ok 9 7702 - Flush ctinfo actions
ok 10 3201 - Add ctinfo action with duplicate index
ok 11 8295 - Add ctinfo action with invalid index
ok 12 3964 - Replace ctinfo action with invalid goto_chain control
Fixes: 24ec483cec ("net: sched: Introduce act_ctinfo action")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20230210200824.444856-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If TCA_STAB attribute is malformed, qdisc_get_stab() returns
an error, and we end up calling ops->destroy() while ops->init()
has not been called yet.
While we are at it, call qdisc_put_stab() after ops->destroy().
Fixes: 1f62879e36 ("net/sched: make stab available before ops->init() call")
Reported-by: syzbot+d44d88f1d11e6ca8576b@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The imperfect hash area can be updated while packets are traversing,
which will cause a use-after-free when 'tcf_exts_exec()' is called
with the destroyed tcf_ext.
CPU 0: CPU 1:
tcindex_set_parms tcindex_classify
tcindex_lookup
tcindex_lookup
tcf_exts_change
tcf_exts_exec [UAF]
Stop operating on the shared area directly, by using a local copy,
and update the filter with 'rcu_replace_pointer()'. Delete the old
filter version only after a rcu grace period elapsed.
Fixes: 9b0d4446b5 ("net: sched: avoid atomic swap in tcf_exts_change")
Reported-by: valis <sec@valis.email>
Suggested-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230209143739.279867-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now handle_fragments() in OVS and TC have the similar code, and
this patch removes the duplicate code by moving the function
to nf_conntrack_ovs.
Note that skb_clear_hash(skb) or skb->ignore_df = 1 should be
done only when defrag returns 0, as it does in other places
in kernel.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch has no functional changes and just moves frag check and
tc_skb_cb update out of handle_fragments, to make it easier to move
the duplicate code from handle_fragments() into nf_conntrack_ovs later.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are almost the same code in ovs_skb_network_trim() and
tcf_ct_skb_network_trim(), this patch extracts them into a function
nf_ct_skb_network_trim() and moves the function to nf_conntrack_ovs.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to nf_nat_ovs created by Commit ebddb14049 ("net: move the
nat function to nf_nat_ovs for ovs and tc"), this patch is to create
nf_conntrack_ovs to get these functions shared by OVS and TC only.
There are nf_ct_helper() and nf_ct_add_helper() from nf_conntrak_helper
in this patch, and will be more in the following patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve commit 497cc00224 ("taprio: Handle short intervals and large
packets") to only perform segmentation when skb->len exceeds what
taprio_dequeue() expects.
In practice, this will make the biggest difference when a traffic class
gate is always open in the schedule. This is because the max_frm_len
will be U32_MAX, and such large skb->len values as Kurt reported will be
sent just fine unsegmented.
What I don't seem to know how to handle is how to make sure that the
segmented skbs themselves are smaller than the maximum frame size given
by the current queueMaxSDU[tc]. Nonetheless, we still need to drop
those, otherwise the Qdisc will hang.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The majority of the taprio_enqueue()'s function is spent doing TCP
segmentation, which doesn't look right to me. Compilers shouldn't have a
problem in inlining code no matter how we write it, so move the
segmentation logic to a separate function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
taprio today has a huge problem with small TC gate durations, because it
might accept packets in taprio_enqueue() which will never be sent by
taprio_dequeue().
Since not much infrastructure was available, a kludge was added in
commit 497cc00224 ("taprio: Handle short intervals and large
packets"), which segmented large TCP segments, but the fact of the
matter is that the issue isn't specific to large TCP segments (and even
worse, the performance penalty in segmenting those is absolutely huge).
In commit a54fc09e4c ("net/sched: taprio: allow user input of per-tc
max SDU"), taprio gained support for queueMaxSDU, which is precisely the
mechanism through which packets should be dropped at qdisc_enqueue() if
they cannot be sent.
After that patch, it was necessary for the user to manually limit the
maximum MTU per TC. This change adds the necessary logic for taprio to
further limit the values specified (or not specified) by the user to
some minimum values which never allow oversized packets to be sent.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have one practical reason for doing this and one concerning correctness.
The practical reason has to do with a follow-up patch, which aims to mix
2 sources of max_sdu (one coming from the user and the other automatically
calculated based on TC gate durations @current link speed). Among those
2 sources of input, we must always select the smaller max_sdu value, but
this can change at various link speeds. So the max_sdu coming from the
user must be kept separated from the value that is operationally used
(the minimum of the 2), because otherwise we overwrite it and forget
what the user asked us to do.
To solve that, this patch proposes that struct sched_gate_list contains
the operationally active max_frm_len, and q->max_sdu contains just what
was requested by the user.
The reason having to do with correctness is based on the following
observation: the admin sched_gate_list becomes operational at a given
base_time in the future. Until then, it is inactive and applies no
shaping, all gates are open, etc. So the queueMaxSDU dropping shouldn't
apply either (this is a mechanism to ensure that packets smaller than
the largest gate duration for that TC don't hang the port; clearly it
makes little sense if the gates are always open).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinicius intended taprio to take the L1 overhead into account when
estimating packet transmission time through user input, specifically
through the qdisc size table (man tc-stab).
Something like this:
tc qdisc replace dev $eth root stab overhead 24 taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 \
sched-entry S 0x7e 9000000 \
sched-entry S 0x82 1000000 \
max-sdu 0 0 0 0 0 0 0 200 \
flags 0x0 clockid CLOCK_TAI
Without the overhead being specified, transmission times will be
underestimated and will cause late transmissions. For an offloading
driver, it might even cause TX hangs if there is no open gate large
enough to send the maximum sized packets for that TC (including L1
overhead). Properly knowing the L1 overhead will ensure that we are able
to auto-calculate the queueMaxSDU per traffic class just right, and
avoid these hangs due to head-of-line blocking.
We can't make the stab mandatory due to existing setups, but we can warn
the user that it's important with a warning netlink extack.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220505160357.298794-1-vladimir.oltean@nxp.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some qdiscs like taprio turn out to be actually pretty reliant on a well
configured stab, to not underestimate the skb transmission time (by
properly accounting for L1 overhead).
In a future change, taprio will need the stab, if configured by the
user, to be available at ops->init() time. It will become even more
important in upcoming work, when the overhead will be used for the
queueMaxSDU calculation that is passed to an offloading driver.
However, rcu_assign_pointer(sch->stab, stab) is called right after
ops->init(), making it unavailable, and I don't really see a good reason
for that.
Move it earlier, which nicely seems to simplify the error handling path
as well.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
taprio_dequeue_from_txq() looks at the entry->end_time to determine
whether the skb will overrun its traffic class gate, as if at the end of
the schedule entry there surely is a "gate close" event for it. Hint:
maybe there isn't.
For each schedule entry, introduce an array of kernel times which
actually tracks when in the future will there be an *actual* gate close
event for that traffic class, and use that in the guard band overrun
calculation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently taprio assumes that the budget for a traffic class expires at
the end of the current interval as if the next interval contains a "gate
close" event for this traffic class.
This is, however, an unfounded assumption. Allow schedule entry
intervals to be fused together for a particular traffic class by
calculating the budget until the gate *actually* closes.
This means we need to keep budgets per traffic class, and we also need
to update the budget consumption procedure.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a confusion in terms in taprio which makes what is called
"close_time" to be actually used for 2 things:
1. determining when an entry "closes" such that transmitted skbs are
never allowed to overrun that time (?!)
2. an aid for determining when to advance and/or restart the schedule
using the hrtimer
It makes more sense to call this so-called "close_time" "end_time",
because it's not clear at all to me what "closes". Future patches will
hopefully make better use of the term "to close".
This is an absolutely mechanical change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current taprio code operates on a very simplistic (and incorrect)
assumption: that egress scheduling for a traffic class can only take
place for the duration of the current interval, or i.o.w., it assumes
that at the end of each schedule entry, there is a "gate close" event
for all traffic classes.
As an example, traffic sent with the schedule below will be jumpy, even
though all 8 TC gates are open, so there is absolutely no "gate close"
event (effectively a transition from BIT(tc)==1 to BIT(tc)==0 in
consecutive schedule entries):
tc qdisc replace dev veth0 parent root taprio \
num_tc 2 \
map 0 1 \
queues 1@0 1@1 \
base-time 0 \
sched-entry S 0xff 4000000000 \
clockid CLOCK_TAI \
flags 0x0
This qdisc simply does not have what it takes in terms of logic to
*actually* compute the durations of traffic classes. Also, it does not
recognize the need to use this information on a per-traffic-class basis:
it always looks at entry->interval and entry->close_time.
This change proposes that each schedule entry has an array called
tc_gate_duration[tc]. This holds the information: "for how long will
this traffic class gate remain open, starting from *this* schedule
entry". If the traffic class gate is always open, that value is equal to
the cycle time of the schedule.
We'll also need to keep track, for the purpose of queueMaxSDU[tc]
calculation, what is the maximum time duration for a traffic class
having an open gate. This gives us directly what is the maximum sized
packet that this traffic class will have to accept. For everything else
it has to qdisc_drop() it in qdisc_enqueue().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current taprio software implementation is haunted by the shadow of the
igb/igc hardware model. It iterates over child qdiscs in increasing
order of TXQ index, therefore giving higher xmit priority to TXQ 0 and
lower to TXQ N. According to discussions with Vinicius, that is the
default (perhaps even unchangeable) prioritization scheme used for the
NICs that taprio was first written for (igb, igc), and we have a case of
two bugs canceling out, resulting in a functional setup on igb/igc, but
a less sane one on other NICs.
To the best of my understanding, taprio should prioritize based on the
traffic class, so it should really dequeue starting with the highest
traffic class and going down from there. We get to the TXQ using the
tc_to_txq[] netdev property.
TXQs within the same TC have the same (strict) priority, so we should
pick from them as fairly as we can. We can achieve that by implementing
something very similar to q->curband from multiq_dequeue().
Since igb/igc really do have TXQ 0 of higher hardware priority than
TXQ 1 etc, we need to preserve the behavior for them as well. We really
have no choice, because in txtime-assist mode, taprio is essentially a
software scheduler towards offloaded child tc-etf qdiscs, so the TXQ
selection really does matter (not all igb TXQs support ETF/SO_TXTIME,
says Kurt Kanzenbach).
To preserve the behavior, we need a capability bit so that taprio can
determine if it's running on igb/igc, or on something else. Because igb
doesn't offload taprio at all, we can't piggyback on the
qdisc_offload_query_caps() call from taprio_enable_offload(), but
instead we need a separate call which is also made for software
scheduling.
Introduce two static keys to minimize the performance penalty on systems
which only have igb/igc NICs, and on systems which only have other NICs.
For mixed systems, taprio will have to dynamically check whether to
dequeue using one prioritization algorithm or using the other.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify taprio_dequeue_from_txq() by noticing that we can goto one call
earlier than the previous skb_found label. This is possible because
we've unified the treatment of the child->ops->dequeue(child) return
call, we always try other TXQs now, instead of abandoning the root
dequeue completely if we failed in the peek() case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Future changes will refactor the TXQ selection procedure, and a lot of
stuff will become messy, the indentation of the bulk of the dequeue
procedure would increase, etc.
Break out the bulk of the function into a new one, which knows the TXQ
(child qdisc) we should perform a dequeue from.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This changes the handling of an unlikely condition to not stop dequeuing
if taprio failed to dequeue the peeked skb in taprio_dequeue().
I've no idea when this can happen, but the only side effect seems to be
that the atomic_sub_return() call right above will have consumed some
budget. This isn't a big deal, since either that made us remain without
any budget (and therefore, we'd exit on the next peeked skb anyway), or
we could send some packets from other TXQs.
I'm making this change because in a future patch I'll be refactoring the
dequeue procedure to simplify it, and this corner case will have to go
away.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
There isn't any code in the network stack which calls taprio_peek().
We only see qdisc->ops->peek() being called on child qdiscs of other
classful qdiscs, never from the generic qdisc code. Whereas taprio is
never a child qdisc, it is always root.
This snippet of a comment from qdisc_peek_dequeued() seems to confirm:
/* we can reuse ->gso_skb because peek isn't called for root qdiscs */
Since I've been known to be wrong many times though, I'm not completely
removing it, but leaving a stub function in place which emits a warning.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The > needs be >= to prevent an out of bounds access.
Fixes: de5ca4c385 ("net: sched: sch: Bounds check priority")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/Y+D+KN18FQI2DKLq@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are 2 classes of in-tree drivers currently:
- those who act upon struct tc_taprio_sched_entry :: gate_mask as if it
holds a bit mask of TXQs
- those who act upon the gate_mask as if it holds a bit mask of TCs
When it comes to the standard, IEEE 802.1Q-2018 does say this in the
second paragraph of section 8.6.8.4 Enhancements for scheduled traffic:
| A gate control list associated with each Port contains an ordered list
| of gate operations. Each gate operation changes the transmission gate
| state for the gate associated with each of the Port's traffic class
| queues and allows associated control operations to be scheduled.
In typically obtuse language, it refers to a "traffic class queue"
rather than a "traffic class" or a "queue". But careful reading of
802.1Q clarifies that "traffic class" and "queue" are in fact
synonymous (see 8.6.6 Queuing frames):
| A queue in this context is not necessarily a single FIFO data structure.
| A queue is a record of all frames of a given traffic class awaiting
| transmission on a given Bridge Port. The structure of this record is not
| specified.
i.o.w. their definition of "queue" isn't the Linux TX queue.
The gate_mask really is input into taprio via its UAPI as a mask of
traffic classes, but taprio_sched_to_offload() converts it into a TXQ
mask.
The breakdown of drivers which handle TC_SETUP_QDISC_TAPRIO is:
- hellcreek, felix, sja1105: these are DSA switches, it's not even very
clear what TXQs correspond to, other than purely software constructs.
Only the mqprio configuration with 8 TCs and 1 TXQ per TC makes sense.
So it's fine to convert these to a gate mask per TC.
- enetc: I have the hardware and can confirm that the gate mask is per
TC, and affects all TXQs (BD rings) configured for that priority.
- igc: in igc_save_qbv_schedule(), the gate_mask is clearly interpreted
to be per-TXQ.
- tsnep: Gerhard Engleder clarifies that even though this hardware
supports at most 1 TXQ per TC, the TXQ indices may be different from
the TC values themselves, and it is the TXQ indices that matter to
this hardware. So keep it per-TXQ as well.
- stmmac: I have a GMAC datasheet, and in the EST section it does
specify that the gate events are per TXQ rather than per TC.
- lan966x: again, this is a switch, and while not a DSA one, the way in
which it implements lan966x_mqprio_add() - by only allowing num_tc ==
NUM_PRIO_QUEUES (8) - makes it clear to me that TXQs are a purely
software construct here as well. They seem to map 1:1 with TCs.
- am65_cpsw: from looking at am65_cpsw_est_set_sched_cmds(), I get the
impression that the fetch_allow variable is treated like a prio_mask.
This definitely sounds closer to a per-TC gate mask rather than a
per-TXQ one, and TI documentation does seem to recomment an identity
mapping between TCs and TXQs. However, Roger Quadros would like to do
some testing before making changes, so I'm leaving this driver to
operate as it did before, for now. Link with more details at the end.
Based on this breakdown, we have 5 drivers with a gate mask per TC and
4 with a gate mask per TXQ. So let's make the gate mask per TXQ the
opt-in and the gate mask per TC the default.
Benefit from the TC_QUERY_CAPS feature that Jakub suggested we add, and
query the device driver before calling the proper ndo_setup_tc(), and
figure out if it expects one or the other format.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230202003621.2679603-15-vladimir.oltean@nxp.com/#25193204
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The taprio qdisc does not currently pass the mqprio queue configuration
down to the offloading device driver. So the driver cannot act upon the
TXQ counts/offsets per TC, or upon the prio->tc map. It was probably
assumed that the driver only wants to offload num_tc (see
TC_MQPRIO_HW_OFFLOAD_TCS), which it can get from netdev_get_num_tc(),
but there's clearly more to the mqprio configuration than that.
I've considered 2 mechanisms to remedy that. First is to pass a struct
tc_mqprio_qopt_offload as part of the tc_taprio_qopt_offload. The second
is to make taprio actually call TC_SETUP_QDISC_MQPRIO, *in addition to*
TC_SETUP_QDISC_TAPRIO.
The difference is that in the first case, existing drivers (offloading
or not) all ignore taprio's mqprio portion currently, whereas in the
second case, we could control whether to call TC_SETUP_QDISC_MQPRIO,
based on a new capability. The question is which approach would be
better.
I'm afraid that calling TC_SETUP_QDISC_MQPRIO unconditionally (not based
on a taprio capability bit) would risk introducing regressions. For
example, taprio doesn't populate (or validate) qopt->hw, as well as
mqprio.flags, mqprio.shaper, mqprio.min_rate, mqprio.max_rate.
In comparison, adding a capability is functionally equivalent to just
passing the mqprio in a way that drivers can ignore it, except it's
slightly more complicated to use it (need to set the capability).
Ultimately, what made me go for the "mqprio in taprio" variant was that
it's easier for offloading drivers to interpret the mqprio qopt slightly
differently when it comes from taprio vs when it comes from mqprio,
should that ever become necessary.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The taprio qdisc will need to reconstruct a struct tc_mqprio_qopt from
netdev settings once more in a future patch, but this code was already
written twice, once in taprio and once in mqprio.
Refactor the code to a helper in the common mqprio library.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a lot of code in taprio which is "borrowed" from mqprio.
It makes sense to put a stop to the "borrowing" and start actually
reusing code.
Because taprio and mqprio are built as part of different kernel modules,
code reuse can only take place either by writing it as static inline
(limiting), putting it in sch_generic.o (not generic enough), or
creating a third auto-selectable kernel module which only holds library
code. I opted for the third variant.
In a previous change, mqprio gained support for reverse TC:TXQ mappings,
something which taprio still denies. Make taprio use the same validation
logic so that it supports this configuration as well.
The taprio code didn't enforce TXQ overlaps in txtime-assist mode and
that looks intentional, even if I've no idea why that might be. Preserve
that, but add a comment.
There isn't any dedicated MAINTAINERS entry for mqprio, so nothing to
update there.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make mqprio more user-friendly, create netlink extended ack messages
which say exactly what is wrong about the queue counts. This uses the
new support for printf-formatted extack messages.
Example:
$ tc qdisc add dev eno0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 3@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
Error: sch_mqprio: TC 0 queues 3@0 overlap with TC 1 queues 1@1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mqprio_parse_opt() proudly has a comment:
/* If hardware offload is requested we will leave it to the device
* to either populate the queue counts itself or to validate the
* provided queue counts.
*/
Unfortunately some device drivers did not get this memo, and don't
validate the queue counts, or populate them.
In case drivers don't want to populate the queue counts themselves, just
act upon the requested configuration, it makes sense to introduce a tc
capability, and make mqprio query it, so they don't have to do the
validation themselves.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By imposing that the last TXQ of TC i is smaller than the first TXQ of
any TC j (j := i+1 .. n), mqprio imposes a strict ordering condition for
the TXQ indices (they must increase as TCs increase).
Claudiu points out that the complexity of the TXQ count validation is
too high for this logic, i.e. instead of iterating over j, it is
sufficient that the TXQ indices of TC i and i + 1 are ordered, and that
will eventually ensure global ordering.
This is true, however it doesn't appear to me that is what the code
really intended to do. Instead, based on the comments, it just wanted to
check for overlaps (and this isn't how one does that).
So the following mqprio configuration, which I had recommended to
Vinicius more than once for igb/igc (to account for the fact that on
this hardware, lower numbered TXQs have higher dequeue priority than
higher ones):
num_tc 4 map 0 1 2 3 queues 1@3 1@2 1@1 1@0
is in fact denied today by mqprio.
The full story is that in fact, it's only denied with "hw 0"; if
hardware offloading is requested, mqprio defers TXQ range overlap
validation to the device driver (a strange decision in itself).
This is most certainly a bug, but it's not one that has any merit for
being fixed on "stable" as far as I can tell. This is because mqprio
always rejected a configuration which was in fact valid, and this has
shaped the way in which mqprio configuration scripts got built for
various hardware (see igb/igc in the link below). Therefore, one could
consider it to be merely an improvement for mqprio to allow reverse
TC:TXQ mappings.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230130173145.475943-9-vladimir.oltean@nxp.com/#25188310
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230128010719.2182346-6-vladimir.oltean@nxp.com/#25186442
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some more logic will be added to mqprio offloading, so split that code
up from mqprio_init(), which is already large, and create a new
function, mqprio_enable_offload(), similar to taprio_enable_offload().
Also create the opposite function mqprio_disable_offload().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mqprio_init() is quite large and unwieldy to add more code to.
Split the netlink attribute parsing to a dedicated function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify the offload algorithm of UDP connections to the following:
- Offload NEW connection as unidirectional.
- When connection state changes to ESTABLISHED also update the hardware
flow. However, in order to prevent act_ct from spamming offload add wq for
every packet coming in reply direction in this state verify whether
connection has already been updated to ESTABLISHED in the drivers. If that
it the case, then skip flow_table and let conntrack handle such packets
which will also allow conntrack to potentially promote the connection to
ASSURED.
- When connection state changes to ASSURED set the flow_table flow
NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload
the reply direction.
All other protocols have their offload algorithm preserved and are always
offloaded as bidirectional.
Note that this change tries to minimize the load on flow_table add
workqueue. First, it tracks the last ctinfo that was offloaded by using new
flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for
reply direction packets when the offloads have already been updated with
current ctinfo. Second, when 'add' task executes on workqueue it always
update the offload with current flow state (by checking 'bidirectional'
flow flag and obtaining actual ctinfo/cookie through meta action instead of
caching any of these from the moment of scheduling the 'add' work)
preventing the need from scheduling more updates if state changed
concurrently while the 'add' work was pending on workqueue.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently tcf_ct_flow_table_fill_actions() function assumes that only
established connections can be offloaded and always sets ctinfo to either
IP_CT_ESTABLISHED or IP_CT_ESTABLISHED_REPLY strictly based on direction
without checking actual connection state. To enable UDP NEW connection
offload set the ctinfo, metadata cookie and NF_FLOW_HW_ESTABLISHED
flow_offload flags bit based on ct->status value.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify flow table offload to cache the last ct info status that was passed
to the driver offload callbacks by extending enum nf_flow_flags with new
"NF_FLOW_HW_ESTABLISHED" flag. Set the flag if ctinfo was 'established'
during last act_ct meta actions fill call. This infrastructure change is
necessary to optimize promoting of UDP connections from 'new' to
'established' in following patches in this series.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the check for a negative number of keys as
this cannot ever happen
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The software pedit action didn't get the same love as some of the
other actions and it's still using spinlocks and shared stats in the
datapath.
Transition the action to rcu and percpu stats as this improves the
action's performance dramatically on multiple cpu deployments.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are 1 action and 1 qdisc that may process IPv4 TCP GSO packets
and access iph->tot_len, replace them with skb_ip_totlen() and
iph_totlen() accordingly.
Note that we don't need to replace the one in tcf_csum_ipv4(), as it
will return for TCP GSO packets in tcf_csum_ipv4_tcp().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing was explicitly bounds checking the priority index used to access
clpriop[]. WARN and bail out early if it's pathological. Seen with GCC 13:
../net/sched/sch_htb.c: In function 'htb_activate_prios':
../net/sched/sch_htb.c:437:44: warning: array subscript [0, 31] is outside array bounds of 'struct htb_prio[8]' [-Warray-bounds=]
437 | if (p->inner.clprio[prio].feed.rb_node)
| ~~~~~~~~~~~~~~~^~~~~~
../net/sched/sch_htb.c:131:41: note: while referencing 'clprio'
131 | struct htb_prio clprio[TC_HTB_NUMPRIO];
| ^~~~~~
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20230127224036.never.561-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
William reports kernel soft-lockups on some OVS topologies when TC mirred
egress->ingress action is hit by local TCP traffic [1].
The same can also be reproduced with SCTP (thanks Xin for verifying), when
client and server reach themselves through mirred egress to ingress, and
one of the two peers sends a "heartbeat" packet (from within a timer).
Enqueueing to backlog proved to fix this soft lockup; however, as Cong
noticed [2], we should preserve - when possible - the current mirred
behavior that counts as "overlimits" any eventual packet drop subsequent to
the mirred forwarding action [3]. A compromise solution might use the
backlog only when tcf_mirred_act() has a nest level greater than one:
change tcf_mirred_forward() accordingly.
Also, add a kselftest that can reproduce the lockup and verifies TC mirred
ability to account for further packet drops after TC mirred egress->ingress
(when the nest level is 1).
[1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/Y0w%2FWWY60gqrtGLp@pop-os.localdomain/
[3] such behavior is not guaranteed: for example, if RPS or skb RX
timestamping is enabled on the mirred target device, the kernel
can defer receiving the skb and return NET_RX_SUCCESS inside
tcf_mirred_forward().
Reported-by: William Zhao <wizhao@redhat.com>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
with commit e2ca070f89 ("net: sched: protect against stack overflow in
TC act_mirred"), act_mirred protected itself against excessive stack growth
using per_cpu counter of nested calls to tcf_mirred_act(), and capping it
to MIRRED_RECURSION_LIMIT. However, such protection does not detect
recursion/loops in case the packet is enqueued to the backlog (for example,
when the mirred target device has RPS or skb timestamping enabled). Change
the wording from "recursion" to "nesting" to make it more clear to readers.
CC: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will report extack message if there is an error via netlink_ack(). But
if the rule is not to be exclusively executed by the hardware, extack is not
passed along and offloading failures don't get logged.
In commit 81c7288b17 ("sched: cls: enable verbose logging") Marcelo
made cls could log verbose info for offloading failures, which helps
improving Open vSwitch debuggability when using flower offloading.
It would also be helpful if userspace monitor tools, like "tc monitor",
could log this kind of message, as it doesn't require vswitchd log level
adjusment. Let's add a new tc attributes to report the extack message so
the monitor program could receive the failures. e.g.
# tc monitor
added chain dev enp3s0f1np1 parent ffff: chain 0
added filter dev enp3s0f1np1 ingress protocol all pref 49152 flower chain 0 handle 0x1
ct_state +trk+new
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
Warning: mlx5_core: matching on ct_state +new isn't supported.
In this patch I only report the extack message on add/del operations.
It doesn't look like we need to report the extack message on get/dump
operations.
Note this message not only reporte to multicast groups, it could also
be reported unicast, which may affect the current usersapce tool's behaivor.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230113034353.2766735-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported a nasty crash [1] in net_tx_action() which
made little sense until we got a repro.
This repro installs a taprio qdisc, but providing an
invalid TCA_RATE attribute.
qdisc_create() has to destroy the just initialized
taprio qdisc, and taprio_destroy() is called.
However, the hrtimer used by taprio had already fired,
therefore advance_sched() called __netif_schedule().
Then net_tx_action was trying to use a destroyed qdisc.
We can not undo the __netif_schedule(), so we must wait
until one cpu serviced the qdisc before we can proceed.
Many thanks to Alexander Potapenko for his help.
[1]
BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
__raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
_raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
spin_trylock include/linux/spinlock.h:359 [inline]
qdisc_run_begin include/net/sch_generic.h:187 [inline]
qdisc_run+0xee/0x540 include/net/pkt_sched.h:125
net_tx_action+0x77c/0x9a0 net/core/dev.c:5086
__do_softirq+0x1cc/0x7fb kernel/softirq.c:571
run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934
smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164
kthread+0x31b/0x430 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
Uninit was created at:
slab_post_alloc_hook mm/slab.h:732 [inline]
slab_alloc_node mm/slub.c:3258 [inline]
__kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970
kmalloc_reserve net/core/skbuff.c:358 [inline]
__alloc_skb+0x346/0xcf0 net/core/skbuff.c:430
alloc_skb include/linux/skbuff.h:1257 [inline]
nlmsg_new include/net/netlink.h:953 [inline]
netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436
netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507
rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0xabc/0xe90 net/socket.c:2482
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536
__sys_sendmsg net/socket.c:2565 [inline]
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x367/0x540 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peek at old qdisc and graft only when deleting a leaf class in the htb,
rather than when deleting the htb itself. Do not peek at the qdisc of the
netdev queue when destroying the htb. The caller may already have grafted a
new qdisc that is not part of the htb structure being destroyed.
This fix resolves two use cases.
1. Using tc to destroy the htb.
- Netdev was being prematurely activated before the htb was fully
destroyed.
2. Using tc to replace the htb with another qdisc (which also leads to
the htb being destroyed).
- Premature netdev activation like previous case. Newly grafted qdisc
was also getting accidentally overwritten when destroying the htb.
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230113005528.302625-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While experimenting with applying noqueue to a classful queue discipline,
we discovered a NULL pointer dereference in the __dev_queue_xmit()
path that generates a kernel OOPS:
# dev=enp0s5
# tc qdisc replace dev $dev root handle 1: htb default 1
# tc class add dev $dev parent 1: classid 1:1 htb rate 10mbit
# tc qdisc add dev $dev parent 1:1 handle 10: noqueue
# ping -I $dev -w 1 -c 1 1.1.1.1
[ 2.172856] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2.173217] #PF: supervisor instruction fetch in kernel mode
...
[ 2.178451] Call Trace:
[ 2.178577] <TASK>
[ 2.178686] htb_enqueue+0x1c8/0x370
[ 2.178880] dev_qdisc_enqueue+0x15/0x90
[ 2.179093] __dev_queue_xmit+0x798/0xd00
[ 2.179305] ? _raw_write_lock_bh+0xe/0x30
[ 2.179522] ? __local_bh_enable_ip+0x32/0x70
[ 2.179759] ? ___neigh_create+0x610/0x840
[ 2.179968] ? eth_header+0x21/0xc0
[ 2.180144] ip_finish_output2+0x15e/0x4f0
[ 2.180348] ? dst_output+0x30/0x30
[ 2.180525] ip_push_pending_frames+0x9d/0xb0
[ 2.180739] raw_sendmsg+0x601/0xcb0
[ 2.180916] ? _raw_spin_trylock+0xe/0x50
[ 2.181112] ? _raw_spin_unlock_irqrestore+0x16/0x30
[ 2.181354] ? get_page_from_freelist+0xcd6/0xdf0
[ 2.181594] ? sock_sendmsg+0x56/0x60
[ 2.181781] sock_sendmsg+0x56/0x60
[ 2.181958] __sys_sendto+0xf7/0x160
[ 2.182139] ? handle_mm_fault+0x6e/0x1d0
[ 2.182366] ? do_user_addr_fault+0x1e1/0x660
[ 2.182627] __x64_sys_sendto+0x1b/0x30
[ 2.182881] do_syscall_64+0x38/0x90
[ 2.183085] entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
[ 2.187402] </TASK>
Previously in commit d66d6c3152 ("net: sched: register noqueue
qdisc"), NULL was set for the noqueue discipline on noqueue init
so that __dev_queue_xmit() falls through for the noqueue case. This
also sets a bypass of the enqueue NULL check in the
register_qdisc() function for the struct noqueue_disc_ops.
Classful queue disciplines make it past the NULL check in
__dev_queue_xmit() because the discipline is set to htb (in this case),
and then in the call to __dev_xmit_skb(), it calls into htb_enqueue()
which grabs a leaf node for a class and then calls qdisc_enqueue() by
passing in a queue discipline which assumes ->enqueue() is not set to NULL.
Fix this by not allowing classes to be assigned to the noqueue
discipline. Linux TC Notes states that classes cannot be set to
the noqueue discipline. [1] Let's enforce that here.
Links:
1. https://linux-tc-notes.sourceforge.net/tc/doc/sch_noqueue.txt
Fixes: d66d6c3152 ("net: sched: register noqueue qdisc")
Cc: stable@vger.kernel.org
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20230109163906.706000-1-fred@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
No regressions in MPLS tests:
# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0
[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/
Fixes: 2a2ea50870 ("net: sched: add mpls manipulation actions to TC")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Tested-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons,
avoid null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught
by Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch
and kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal document
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TlcN
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
Fix W=1 kernel-doc warning:
net/sched/sch_htb.c:214: warning: expecting prototype for htb_classify(). Prototype was for HTB_DIRECT() instead
by moving the HTB_DIRECT() macro above the function.
Add kernel-doc notation for function parameters as well.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume
res.class contains a valid pointer
Fixes: b0188d4dbe ("[NET_SCHED]: sch_atm: Lindent")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810c287f00 (size 256):
comm "syz-executor105", pid 3600, jiffies 4294943292 (age 12.990s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814cf9f0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
[<ffffffff839c9e07>] kmalloc include/linux/slab.h:576 [inline]
[<ffffffff839c9e07>] kmalloc_array include/linux/slab.h:627 [inline]
[<ffffffff839c9e07>] kcalloc include/linux/slab.h:659 [inline]
[<ffffffff839c9e07>] tcf_exts_init include/net/pkt_cls.h:250 [inline]
[<ffffffff839c9e07>] tcindex_set_parms+0xa7/0xbe0 net/sched/cls_tcindex.c:342
[<ffffffff839caa1f>] tcindex_change+0xdf/0x120 net/sched/cls_tcindex.c:553
[<ffffffff8394db62>] tc_new_tfilter+0x4f2/0x1100 net/sched/cls_api.c:2147
[<ffffffff8389e91c>] rtnetlink_rcv_msg+0x4dc/0x5d0 net/core/rtnetlink.c:6082
[<ffffffff839eba67>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2540
[<ffffffff839eab87>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
[<ffffffff839eab87>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345
[<ffffffff839eb046>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921
[<ffffffff8383e796>] sock_sendmsg_nosec net/socket.c:714 [inline]
[<ffffffff8383e796>] sock_sendmsg+0x56/0x80 net/socket.c:734
[<ffffffff8383eb08>] ____sys_sendmsg+0x178/0x410 net/socket.c:2482
[<ffffffff83843678>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536
[<ffffffff838439c5>] __sys_sendmmsg+0x105/0x330 net/socket.c:2622
[<ffffffff83843c14>] __do_sys_sendmmsg net/socket.c:2651 [inline]
[<ffffffff83843c14>] __se_sys_sendmmsg net/socket.c:2648 [inline]
[<ffffffff83843c14>] __x64_sys_sendmmsg+0x24/0x30 net/socket.c:2648
[<ffffffff84605fd5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84605fd5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================
Kernel uses tcindex_change() to change an existing
filter properties.
Yet the problem is that, during the process of changing,
if `old_r` is retrieved from `p->perfect`, then
kernel uses tcindex_alloc_perfect_hash() to newly
allocate filter results, uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure, which triggers the above memory leak.
To be more specific, there are only two source for the `old_r`,
according to the tcindex_lookup(). `old_r` is retrieved from
`p->perfect`, or `old_r` is retrieved from `p->h`.
* If `old_r` is retrieved from `p->perfect`, kernel uses
tcindex_alloc_perfect_hash() to newly allocate the
filter results. Then `r` is assigned with `cp->perfect + handle`,
which is newly allocated. So condition `old_r && old_r != r` is
true in this situation, and kernel uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure
* If `old_r` is retrieved from `p->h`, then `p->perfect` is NULL
according to the tcindex_lookup(). Considering that `cp->h`
is directly copied from `p->h` and `p->perfect` is NULL,
`r` is assigned with `tcindex_lookup(cp, handle)`, whose value
should be the same as `old_r`, so condition `old_r && old_r != r`
is false in this situation, kernel ignores using
tcindex_filter_result_init() to clear the old filter result.
So only when `old_r` is retrieved from `p->perfect` does kernel use
tcindex_filter_result_init() to clear the old filter result, which
triggers the above memory leak.
Considering that there already exists a tc_filter_wq workqueue
to destroy the old tcindex_data by tcindex_partial_destroy_work()
at the end of tcindex_set_parms(), this patch solves
this memory leak bug by removing this old filter result
clearing part and delegating it to the tc_filter_wq workqueue.
Note that this patch doesn't introduce any other issues. If
`old_r` is retrieved from `p->perfect`, this patch just
delegates old filter result clearing part to the
tc_filter_wq workqueue; If `old_r` is retrieved from `p->h`,
kernel doesn't reach the old filter result clearing part, so
removing this part has no effect.
[Thanks to the suggestion from Jakub Kicinski, Cong Wang, Paolo Abeni
and Dmitry Vyukov]
Fixes: b9a24bb76b ("net_sched: properly handle failure case of tcf_exts_init()")
Link: https://lore.kernel.org/all/0000000000001de5c505ebc9ec59@google.com/
Reported-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com
Tested-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When TCF_EM_SIMPLE was introduced, it is supposed to be convenient
for ematch implementation:
https://lore.kernel.org/all/20050105110048.GO26856@postel.suug.ch/
"You don't have to, providing a 32bit data chunk without TCF_EM_SIMPLE
set will simply result in allocating & copy. It's an optimization,
nothing more."
So if an ematch module provides ops->datalen that means it wants a
complex data structure (saved in its em->data) instead of a simple u32
value. We should simply reject such a combination, otherwise this u32
could be misinterpreted as a pointer.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+4caeae4c7103813598ae@syzkaller.appspotmail.com
Reported-by: Jun Nie <jun.nie@linaro.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
There are two nat functions are nearly the same in both OVS and
TC code, (ovs_)ct_nat_execute() and ovs_ct_nat/tcf_ct_act_nat().
This patch creates nf_nat_ovs.c under netfilter and moves them
there then exports nf_ct_nat() so that it can be shared by both
OVS and TC, and keeps the nat (type) check and nat flag update
in OVS and TC's own place, as these parts are different between
OVS and TC.
Note that in OVS nat function it was using skb->protocol to get
the proto as it already skips vlans in key_extract(), while it
doesn't in TC, and TC has to call skb_protocol() to get proto.
So in nf_ct_nat_execute(), we keep using skb_protocol() which
works for both OVS and TC contrack.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ovs_ct_nat_execute(), the packet flow key nat flags are updated
when it processes ICMP(v6) error packets translation successfully.
In ct_nat_execute() when processing ICMP(v6) error packets translation
successfully, it should have done the same in ct_nat_execute() to set
post_ct_s/dnat flag, which will be used to update flow key nat flags
in OVS module later.
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose the necessary tc classifier functions and wire up cls_api to use
direct calls in retpoline kernels.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose the necessary tc act functions and wire up act_api to use
direct calls in retpoline kernels.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On kernels using retpoline as a spectrev2 mitigation,
optimize actions and filters that are compiled as built-ins into a direct call.
On subsequent patches we expose the classifiers and actions functions
and wire up the wrapper into tc.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit f11fe1dae1 ("net/sched: Make NET_ACT_CT depends on NF_NAT"),
it fixed the build failure when NF_NAT is m and NET_ACT_CT is y by
adding depends on NF_NAT for NET_ACT_CT. However, it would also cause
NET_ACT_CT cannot be built without NF_NAT, which is not expected. This
patch fixes it by changing to use "(!NF_NAT || NF_NAT)" as the depend.
Fixes: f11fe1dae1 ("net/sched: Make NET_ACT_CT depends on NF_NAT")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/b6386f28d1ba34721795fb776a91cbdabb203447.1668807183.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nf_conn:mark can be read from and written to in parallel. Use
READ_ONCE()/WRITE_ONCE() for reads and writes to prevent unwanted
compiler optimizations.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This patch is to add helper support in act_ct for OVS actions=ct(alg=xxx)
offloading, which is corresponding to Commit cae3a26275 ("openvswitch:
Allow attaching helpers to ct action") in OVS kernel part.
The difference is when adding TC actions family and proto cannot be got
from the filter/match, other than helper name in tb[TCA_CT_HELPER_NAME],
we also need to send the family in tb[TCA_CT_HELPER_FAMILY] and the
proto in tb[TCA_CT_HELPER_PROTO] to kernel.
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch is to make the err path simple by calling tcf_ct_params_free(),
so that it won't cause problems when more members are added into param and
need freeing on the err path.
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We can't use "skb" again after passing it to qdisc_enqueue(). This is
basically identical to commit 2f09707d0c ("sch_sfb: Also store skb
len before calling child enqueue").
Fixes: d7f4f332f0 ("sch_red: update backlog as well")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for skbedit queue mapping action on receive
side. This is supported only in hardware, so the skip_sw
flag is enforced. This enables offloading filters for
receive queue selection in the hardware using the
skbedit action. Traffic arrives on the Rx queue requested
in the skbedit action parameter. A new tc action flag
TCA_ACT_FLAGS_AT_INGRESS is introduced to identify the
traffic direction the action queue_mapping is requested
on during filter addition. This is used to disallow
offloading the skbedit queue mapping action on transmit
side.
Example:
$tc filter add dev $IFACE ingress protocol ip flower dst_ip $DST_IP\
action skbedit queue_mapping $rxq_id skip_sw
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
