The double `without' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It should be better to check pointer firstly, then assign it
to c->rules[]. Refine code a little bit.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fix the following coccicheck warning:
net/ceph/crush/mapper.c:1077:8-9: WARNING opportunity for swap()
by using swap() for the swapping of variable values and drop
the tmp variable that is not needed any more.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
cancel_request() never guaranteed that after its return the OSD
client would be completely done with the OSD request. The callback
(if specified) can still be invoked and a ref can still be held.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
request_reinit() is not only ugly as the comment rightfully suggests,
but also unsafe. Even though it is called with osdc->lock held for
write in all cases, resetting the OSD request refcount can still race
with handle_reply() and result in use-after-free. Taking linger ping
as an example:
handle_timeout thread handle_reply thread
down_read(&osdc->lock)
req = lookup_request(...)
...
finish_request(req) # unregisters
up_read(&osdc->lock)
__complete_request(req)
linger_ping_cb(req)
# req->r_kref == 2 because handle_reply still holds its ref
down_write(&osdc->lock)
send_linger_ping(lreq)
req = lreq->ping_req # same req
# cancel_linger_request is NOT
# called - handle_reply already
# unregistered
request_reinit(req)
WARN_ON(req->r_kref != 1) # fires
request_init(req)
kref_init(req->r_kref)
# req->r_kref == 1 after kref_init
ceph_osdc_put_request(req)
kref_put(req->r_kref)
# req->r_kref == 0 after kref_put, req is freed
<further req initialization/use> !!!
This happens because send_linger_ping() always (re)uses the same OSD
request for watch ping requests, relying on cancel_linger_request() to
unregister it from the OSD client and rip its messages out from the
messenger. send_linger() does the same for watch/notify registration
and watch reconnect requests. Unfortunately cancel_request() doesn't
guarantee that after it returns the OSD client would be completely done
with the OSD request -- a ref could still be held and the callback (if
specified) could still be invoked too.
The original motivation for request_reinit() was inability to deal with
allocation failures in send_linger() and send_linger_ping(). Switching
to using osdc->req_mempool (currently only used by CephFS) respects that
and allows us to get rid of request_reinit().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Just call set_in_bvec in the non-conditional part.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Both msgr1 and msgr2 in crc mode are zero copy in the sense that
message data is read from the socket directly into the destination
buffer. We assume that the destination buffer is stable (i.e. remains
unchanged while it is being read to) though. Otherwise, CRC errors
ensue:
libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706
libceph: osd1 (1)192.168.122.1:6843 bad crc/signature
libceph: bad data crc, calculated 57958023, expected 1805382778
libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc
Introduce rxbounce option to enable use of a bounce buffer when
receiving message data. In particular this is needed if a mapped
image is a Windows VM disk, passed to QEMU. Windows has a system-wide
"dummy" page that may be mapped into the destination buffer (potentially
more than once into the same buffer) by the Windows Memory Manager in
an effort to generate a single large I/O [1][2]. QEMU makes a point of
preserving overlap relationships when cloning I/O vectors, so krbd gets
exposed to this behaviour.
[1] "What Is Really in That MDL?"
https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85)
[2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The recv path of secure mode is intertwined with that of crc mode.
While it's slightly more efficient that way (the ciphertext is read
into the destination buffer and decrypted in place, thus avoiding
two potentially heavy memory allocations for the bounce buffer and
the corresponding sg array), it isn't really amenable to changes.
Sacrifice that edge and align with the send path which always uses
a full-sized bounce buffer (currently there is no other way -- if
the kernel crypto API ever grows support for streaming (piecewise)
en/decryption for GCM [1], we would be able to easily take advantage
of that on both sides).
[1] https://lore.kernel.org/all/20141225202830.GA18794@gondor.apana.org.au/
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
by Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota
and a new mount option for turning on unbuffered I/O mode globally
instead of on a per-file basis with ioctl(CEPH_IOC_SYNCIO).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmHpP5ATHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi0TgB/480i2lPHgA3ujJNqo5Q6z+W0vtTA2+
Wx+4rAUgIESJVunbFxvecPbzyUXTe7wWFI11TCVHPpf6GyIIDTD+uHd3kKWtLsfL
Zkk1/2PN9Q5Dh29R+N8rP9NaP8tIaTQjyiO3iqmRZlo+k0Z/lYtWUb+fUP05XlVY
ML/ktW543tkKeYwl3SWdW5MqAAOVGDbTt+L51CraDhVoiUac5ptkP+cmDmIqsnGa
ZHVqpwugxgndEIyuBHDLBps+5/LrEaL10xDhGcMtP9hwGYhyNr6Yj+azfGtHWwOi
jdVsdHDiecUBVtGyZ351Y4pCMOmP0uJif6MOUZFXYYSSeUBUhH8UjgEi
=jcte
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlight is the new mount "device" string syntax implemented by
Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota and
a new mount option for turning on unbuffered I/O mode globally instead
of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)"
* tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client:
ceph: move CEPH_SUPER_MAGIC definition to magic.h
ceph: remove redundant Lsx caps check
ceph: add new "nopagecache" option
ceph: don't check for quotas on MDS stray dirs
ceph: drop send metrics debug message
rbd: make const pointer spaces a static const array
ceph: Fix incorrect statfs report for small quota
ceph: mount syntax module parameter
doc: document new CephFS mount device syntax
ceph: record updated mon_addr on remount
ceph: new device mount syntax
libceph: rename parse_fsid() to ceph_parse_fsid() and export
libceph: generalize addr/ip parsing based on delimiter
Support for GFP_NO{FS,IO} and __GFP_NOFAIL has been implemented by
previous patches so we can allow the support for kvmalloc. This will
allow some external users to simplify or completely remove their
helpers.
GFP_NOWAIT semantic hasn't been supported so far but it hasn't been
explicitly documented so let's add a note about that.
ceph_kvmalloc is the first helper to be dropped and changed to kvmalloc.
Link: https://lkml.kernel.org/r/20211122153233.9924-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... as it is too generic. also, use __func__ when logging
rather than hardcoding the function name.
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
... and remove hardcoded function name in ceph_parse_ips().
[ idryomov: delim parameter, drop CEPH_ADDR_PARSE_DEFAULT_DELIM ]
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This patch moves ceph_osdc_copy_from() function out of libceph code into
cephfs. There are no other users for this function, and there is the need
(in another patch) to access internal ceph_osd_request struct members.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Call to build_initial_monmap() is one stone two birds. Explicitly it
initializes err variable. Implicitly it initializes ->monmap via call to
kzalloc(). We should only declare err and ->monmap is taken care of by
ceph_monc_init() prototype.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add description to fix the following W=1 kernel build warnings:
net/ceph/cls_lock_client.c:28: warning: Function parameter or
member 'osdc' not described in 'ceph_cls_lock'
net/ceph/cls_lock_client.c:28: warning: Function parameter or
member 'oid' not described in 'ceph_cls_lock'
net/ceph/cls_lock_client.c:28: warning: Function parameter or
member 'oloc' not described in 'ceph_cls_lock'
[ idryomov: tweak osdc description ]
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is no necessary to define variable assignment, just return
directly to simplify the steps.
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We never receive authorizer replies with cephx disabled, so it is
bogus. Also, it still uses the old zero-length array style.
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Commit 61ca49a910 ("libceph: don't set global_id until we get an
auth ticket") delayed the setting of global_id too much. It is set
only after all tickets are received, but in pre-nautilus clusters an
auth ticket and the service tickets are obtained in separate steps
(for a total of three MAuth replies). When the service tickets are
requested, global_id is used to build an authorizer; if global_id is
still 0 we never get them and fail to establish the session.
Moving the setting of global_id into protocol implementations. This
way global_id can be set exactly when an auth ticket is received, not
sooner nor later.
Fixes: 61ca49a910 ("libceph: don't set global_id until we get an auth ticket")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
There is no result to pass in msgr2 case because authentication
failures are reported through auth_bad_method frame and in MAuth
case an error is returned immediately.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
netfs helper library from Jeff, three new filesystem client metrics
from Xiubo, ceph.dir.rsnaps vxattr from Yanhu and two auth-related
fixes from myself, marked for stable. Interspersed is a smattering
of assorted fixes and cleanups across the filesystem.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmCT8IITHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzizgqCACYbyY4Yr/2C8fZsn+P9rd97zRTbcC6
eufTZwnlECLnc89BxJQRk9a2UpDJfC8RMM3/9tmiulc8G4M+ggVbdFQTCzsZox3c
vLAunGeVyfKIY+16Bv2RNuoO3KeeZm5aB3jXJ5QcUPcXmd4XnHKI1FU2ebC56UJb
pxxfHpE6fb59r6Ek1e5uUFyta4KDMrvwXozghuAPEgT1GpKeA9zMIGI0CkQbBHlW
PWHpcahTiT6GWa/d9ud0CnfssiBxVydWyKTz9xppYC6LNdsZUf9tBmYYGRklcjoA
yAwPSuqxNmg+7uWubEawc0+a/3fXORgp2SF7Rbp1XYE+HpfnMF1J+nIn
=IO5c
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.13-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Notable items here are
- a series to take advantage of David Howells' netfs helper library
from Jeff
- three new filesystem client metrics from Xiubo
- ceph.dir.rsnaps vxattr from Yanhu
- two auth-related fixes from myself, marked for stable.
Interspersed is a smattering of assorted fixes and cleanups across the
filesystem"
* tag 'ceph-for-5.13-rc1' of git://github.com/ceph/ceph-client: (24 commits)
libceph: allow addrvecs with a single NONE/blank address
libceph: don't set global_id until we get an auth ticket
libceph: bump CephXAuthenticate encoding version
ceph: don't allow access to MDS-private inodes
ceph: fix up some bare fetches of i_size
ceph: convert some PAGE_SIZE invocations to thp_size()
ceph: support getting ceph.dir.rsnaps vxattr
ceph: drop pinned_page parameter from ceph_get_caps
ceph: fix inode leak on getattr error in __fh_to_dentry
ceph: only check pool permissions for regular files
ceph: send opened files/pinned caps/opened inodes metrics to MDS daemon
ceph: avoid counting the same request twice or more
ceph: rename the metric helpers
ceph: fix kerneldoc copypasta over ceph_start_io_direct
ceph: use attach/detach_page_private for tracking snap context
ceph: don't use d_add in ceph_handle_snapdir
ceph: don't clobber i_snap_caps on non-I_NEW inode
ceph: fix fall-through warnings for Clang
ceph: convert ceph_readpages to ceph_readahead
ceph: convert ceph_write_begin to netfs_write_begin
...
Normally, an unused OSD id/slot is represented by an empty addrvec.
However, it also appears to be possible to generate an osdmap where
an unused OSD id/slot has an addrvec with a single blank address of
type NONE. Allow such addrvecs and make the end result be exactly
the same as for the empty addrvec case -- leave addr intact.
Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
With the introduction of enforcing mode, setting global_id as soon
as we get it in the first MAuth reply will result in EACCES if the
connection is reset before we get the second MAuth reply containing
an auth ticket -- because on retry we would attempt to reclaim that
global_id with no auth ticket at hand.
Neither ceph_auth_client nor ceph_mon_client depend on global_id
being set ealy, so just delay the setting until we get and process
the second MAuth reply. While at it, complain if the monitor sends
a zero global_id or changes our global_id as the session is likely
to fail after that.
Cc: stable@vger.kernel.org # needs backporting for < 5.11
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
A dummy v3 encoding (exactly the same as v2) was introduced so that
the monitors can distinguish broken clients that may not include their
auth ticket in CEPHX_GET_AUTH_SESSION_KEY request on reconnects, thus
failing to prove previous possession of their global_id (one part of
CVE-2021-20288).
The kernel client has always included its auth ticket, so it is
compatible with enforcing mode as is. However we want to bump the
encoding version to avoid having to authenticate twice on the initial
connect -- all legacy (CephXAuthenticate < v3) are now forced do so in
order to expose insecure global_id reclaim.
Marking for stable since at least for 5.11 and 5.12 it is trivial
(v2 -> v3).
Cc: stable@vger.kernel.org # 5.11+
URL: https://tracker.ceph.com/issues/50452
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Modify "inital" to "initial" in net/ceph/osdmap.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 83aff95eb9 ("libceph: remove 'osdtimeout' option") deprecated
osdtimeout over 8 years ago, but it is still recognized. Let's remove
it entirely.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
These options were introduced in 3.19 with support for message signing
and are rather useless, as explained in commit a51983e4dd ("libceph:
add nocephx_sign_messages option"). Deprecate them.
In case there is someone out there with a cluster that lacks support
for MSG_AUTH feature (very unlikely but has to be considered since we
haven't formally raised the bar from argonaut to bobtail yet), make
nocephx_sign_messages also waive MSG_AUTH requirement. This is probably
how it should have been done in the first place -- if we aren't going
to sign, requiring the signing feature makes no sense.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This line dates back to 2013, but cppcheck complained because commit
2f713615dd ("libceph: move msgr1 protocol implementation to its own
file") moved it. Add parenthesis to silence the warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since a few years, kernel addresses are no longer included in oops
dumps, at least on x86. All we get is a symbol name with offset and
size.
This is a problem for ceph_connection_operations handlers, especially
con->ops->dispatch(). All three handlers have the same name and there
is little context to disambiguate between e.g. monitor and OSD clients
because almost everything is inlined. gdb sneakily stops at the first
matching symbol, so one has to resort to nm and addr2line.
Some of these are already prefixed with mon_, osd_ or mds_. Let's do
the same for all others.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Try and avoid leaving bits and pieces of session key and connection
secret (gets split into GCM key and a pair of GCM IVs) around.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
crypto_shash_setkey() and crypto_aead_setkey() will do a (small)
GFP_ATOMIC allocation to align the key if it isn't suitably aligned.
It's not a big deal, but at the same time easy to avoid.
The actual alignment requirement is dynamic, queryable with
crypto_shash_alignmask() and crypto_aead_alignmask(), but shouldn't
be stricter than 16 bytes for our algorithms.
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
auth_signature frame is 68 bytes in plain mode and 96 bytes in
secure mode but we are requesting 68 bytes in both modes. By luck,
this doesn't actually result in any invalid memory accesses because
the allocation is satisfied out of kmalloc-96 slab and so exactly
96 bytes are allocated, but KASAN rightfully complains.
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
adds the option of full in-transit encryption using AES-GCM algorithm
(myself). On top of that we have a series to avoid intermittent
errors during recovery with recover_session=clean and some MDS request
encoding work from Jeff, a cap handling fix and assorted observability
improvements from Luis and Xiubo and a good number of cleanups. Luis
also ran into a corner case with quotas which sadly means that we are
back to denying cross-quota-realm renames.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl/beWITHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi4i0CACnvd87l2n7dndig7p5d5lVsmo8tAFs
wHYHaIVisWKMcqKoT+YJajSgzaonxjzvYiyCzwLxV7s7vI7cswAwjEfYT7tTDRp2
pnO1+4N/1ftznnTk/1QdqwOQLUg5UtdgWvFCaXQF+Vr/YroZomKJPaK8fXK882pC
9FBjoLNy1HWySsoXPCxJktmDzpEEyYRNJg0vquxm7mxwTgQErupWlwEFjNg5LBkm
gC0UoKhCE3DeUrXnoq21Ga62RIajxHofTooNx7dg+JiSVgluW+nORaWDYJXNzwLC
j5puSe4pWIah+gmcwIFuyNz4ddkvVL4URvsYPGkVFYXlEefQjErc10Jh
=6b9f
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The big ticket item here is support for msgr2 on-wire protocol, which
adds the option of full in-transit encryption using AES-GCM algorithm
(myself).
On top of that we have a series to avoid intermittent errors during
recovery with recover_session=clean and some MDS request encoding work
from Jeff, a cap handling fix and assorted observability improvements
from Luis and Xiubo and a good number of cleanups.
Luis also ran into a corner case with quotas which sadly means that we
are back to denying cross-quota-realm renames"
* tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-client: (59 commits)
libceph: drop ceph_auth_{create,update}_authorizer()
libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1
libceph, ceph: implement msgr2.1 protocol (crc and secure modes)
libceph: introduce connection modes and ms_mode option
libceph, rbd: ignore addr->type while comparing in some cases
libceph, ceph: get and handle cluster maps with addrvecs
libceph: factor out finish_auth()
libceph: drop ac->ops->name field
libceph: amend cephx init_protocol() and build_request()
libceph, ceph: incorporate nautilus cephx changes
libceph: safer en/decoding of cephx requests and replies
libceph: more insight into ticket expiry and invalidation
libceph: move msgr1 protocol specific fields to its own struct
libceph: move msgr1 protocol implementation to its own file
libceph: separate msgr1 protocol implementation
libceph: export remaining protocol independent infrastructure
libceph: export zero_page
libceph: rename and export con->flags bits
libceph: rename and export con->state states
libceph: make con->state an int
...
Implement msgr2.1 wire protocol, available since nautilus 14.2.11
and octopus 15.2.5. msgr2.0 wire protocol is not implemented -- it
has several security, integrity and robustness issues and therefore
considered deprecated.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
msgr2 supports two connection modes: crc (plain) and secure (on-wire
encryption). Connection mode is picked by server based on input from
client.
Introduce ms_mode option:
ms_mode=legacy - msgr1 (default)
ms_mode=crc - crc mode, if denied fail
ms_mode=secure - secure mode, if denied fail
ms_mode=prefer-crc - crc mode, if denied agree to secure mode
ms_mode=prefer-secure - secure mode, if denied agree to crc mode
ms_mode affects all connections, we don't separate connections to mons
like it's done in userspace with ms_client_mode vs ms_mon_client_mode.
For now the default is legacy, to be flipped to prefer-crc after some
time.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For libceph, this ensures that libceph instance sharing (share option)
continues to work. For rbd, this avoids blocklisting alive lock owners
(locker addr is always LEGACY, while watcher addr is ANY in nautilus).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In preparation for msgr2, make the cluster send us maps with addrvecs
including both LEGACY and MSGR2 addrs instead of a single LEGACY addr.
This means advertising support for SERVER_NAUTILUS and also some older
features: SERVER_MIMIC, MONENC and MONNAMES.
MONNAMES and MONENC are actually pre-argonaut, we just never updated
ceph_monmap_decode() for them. Decoding is unconditional, see commit
23c625ce30 ("libceph: assume argonaut on the server side").
SERVER_MIMIC doesn't bear any meaning for the kernel client.
Since ceph_decode_entity_addrvec() is guarded by encoding version
checks (and in msgr2 case it is guarded implicitly by the fact that
server is speaking msgr2), we assume MSG_ADDR2 for it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In preparation for msgr2, factor out finish_auth() so it is suitable
for both existing MAuth message based authentication and upcoming msgr2
authentication exchange.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In msgr2, initial authentication happens with an exchange of msgr2
control frames -- MAuth message and struct ceph_mon_request_header
aren't used. Make that optional.
Stop reporting cephx protocol as "x". Use "cephx" instead.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- request service tickets together with auth ticket. Currently we get
auth ticket via CEPHX_GET_AUTH_SESSION_KEY op and then request service
tickets via CEPHX_GET_PRINCIPAL_SESSION_KEY op in a separate message.
Since nautilus, desired service tickets are shared togther with auth
ticket in CEPHX_GET_AUTH_SESSION_KEY reply.
- propagate session key and connection secret, if any. In preparation
for msgr2, update handle_reply() and verify_authorizer_reply() auth
ops to propagate session key and connection secret. Since nautilus,
if secure mode is negotiated, connection secret is shared either in
CEPHX_GET_AUTH_SESSION_KEY reply (for mons) or in a final authorizer
reply (for osds and mdses).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Make it clear that "need" is a union of "missing" and "have, but up
for renewal" and dout when the ticket goes missing due to expiry or
invalidation by client.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A pure move, no other changes.
Note that ceph_tcp_recv{msg,page}() and ceph_tcp_send{msg,page}()
helpers are also moved. msgr2 will bring its own, more efficient,
variants based on iov_iter. Switching msgr1 to them was considered
but decided against to avoid subtle regressions.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In preparation for msgr2, define internal messenger <-> protocol
interface (as opposed to external messenger <-> client interface, which
is struct ceph_connection_operations) consisting of try_read(),
try_write(), revoke(), revoke_incoming(), opened(), reset_session() and
reset_protocol() ops. The semantics are exactly the same as they are
now.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In preparation for msgr2, rename msgr1 specific states and move the
defines to the header file.
Also drop state transition comments. They don't cover all possible
transitions (e.g. NEGOTIATING -> STANDBY, etc) and currently do more
harm than good.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
unsigned long is a leftover from when con->state used to be a set of
bits managed with set_bit(), clear_bit(), etc. Save a bit of memory.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Our messenger instance addr->port is normally zero -- anything else is
nonsensical because as a client we connect to multiple servers and don't
listen on any port. However, a user can supply an arbitrary addr:port
via ip option and the port is currently preserved. Zero it.
Conversely, make sure our addr->nonce is non-zero. A zero nonce is
special: in combination with a zero port, it is used to blocklist the
entire ip.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move the logic of grabbing the next message from the queue into its own
function. Like ceph_con_in_msg_alloc(), this is protocol independent.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_con_in_msg_alloc() is protocol independent, but con->in_hdr (and
struct ceph_msg_header in general) is msgr1 specific. While the struct
is deeply ingrained inside and outside the messenger, con->in_hdr field
can be separated.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stick with pr_info message because session reset isn't an error most of
the time. When it is (i.e. if the server denies the reconnect attempt),
we get a bunch of other pr_err messages.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
con->peer_global_seq is part of session state. Clear it when
the server tells us to reset, not just in ceph_con_close().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move protocol reset bits into ceph_con_reset_protocol(), leaving
just session reset bits.
Note that con->out_skip is now reset on faults. This fixes a crash
in the case of a stateful session getting a fault while in the middle
of revoking a message.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A fault due to a version mismatch or a feature set mismatch used to be
treated differently from other faults: the connection would get closed
without trying to reconnect and there was a ->bad_proto() connection op
for notifying about that.
This changed a long time ago, see commits 6384bb8b8e ("libceph: kill
bad_proto ceph connection op") and 0fa6ebc600 ("libceph: fix protocol
feature mismatch failure path"). Nowadays these aren't any different
from other faults (i.e. we try to reconnect even though the mismatch
won't resolve until the server is replaced). reset_connection() calls
there are rather confusing because reset_connection() resets a session
together an individual instance of the protocol. This is cleaned up
in the next patch.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The current setting allows the backoff to climb up to 5 minutes. This
is too high -- it becomes hard to tell whether the client is stuck on
something or just in backoff.
In userspace, ms_max_backoff is defaulted to 15 seconds. Let's do the
same.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
con->out_msg must be cleared on Policy::stateful_server
(!CEPH_MSG_CONNECT_LOSSY) faults. Not doing so botches the
reconnection attempt, because after writing the banner the
messenger moves on to writing the data section of that message
(either from where it got interrupted by the connection reset or
from the beginning) instead of writing struct ceph_msg_connect.
This results in a bizarre error message because the server
sends CEPH_MSGR_TAG_BADPROTOVER but we think we wrote struct
ceph_msg_connect:
libceph: mds0 (1)172.21.15.45:6828 socket error on write
ceph: mds0 reconnect start
libceph: mds0 (1)172.21.15.45:6829 socket closed (con state OPEN)
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch, my 32 != server's 32
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch
AFAICT this bug goes back to the dawn of the kernel client.
The reason it survived for so long is that only MDS sessions
are stateful and only two MDS messages have a data section:
CEPH_MSG_CLIENT_RECONNECT (always, but reconnecting is rare)
and CEPH_MSG_CLIENT_REQUEST (only when xattrs are involved).
The connection has to get reset precisely when such message
is being sent -- in this case it was the former.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/47723
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The queued con->work can start executing (and therefore logging)
before we get to this "con->work has been queued" message, making
the logs confusing. Move it up, with the meaning of "con->work
is about to be queued".
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Replace a global map->crush_workspace (protected by a global mutex)
with a list of workspaces, up to the number of CPUs + 1.
This is based on a patch from Robin Geuze <robing@nl.team.blue>.
Robin and his team have observed a 10-20% increase in IOPS on all
queue depths and lower CPU usage as well on a high-end all-NVMe
100GbE cluster.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In libceph, ceph_tcp_sendpage() does the following checks before handle
the page by network layer's zero copy sendpage method,
if (page_count(page) >= 1 && !PageSlab(page))
This check is exactly what sendpage_ok() does. This patch replace the
open coded checks by sendpage_ok() as a code cleanup.
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
[ idryomov: Do the same for the CRUSH paper and replace
ceph.newdream.net with ceph.io. ]
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The caller can just ignore the return. No need for this wrapper that
just casts the other function to void.
[ idryomov: argument alignment ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Instead of copying just oloc, oid and flags, copy the entire
linger target. This is more for consistency than anything else,
as send_linger() -> submit_request() -> __submit_request() sends
the request regardless of what calc_target() says (i.e. both on
CALC_TARGET_NO_ACTION and CALC_TARGET_NEED_RESEND).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Currently target_copy() is used only for sending linger pings, so
this doesn't come up, but generally omitting used_replica can hang
the client as we wouldn't notice the acting set change (legacy_change
in calc_target()) or trigger a warning in handle_reply().
Fixes: 117d96a04f ("libceph: support for balanced and localized reads")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Currently target_copy() is used only for sending linger pings, so
this doesn't come up, but generally omitting recovery_deletes can
result in unneeded resends (force_resend in calc_target()).
Fixes: ae78dd8139 ("libceph: make RECOVERY_DELETES feature create a new interval")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
osd_req_flags is overly general and doesn't suit its only user
(read_from_replica option) well:
- applying osd_req_flags in account_request() affects all OSD
requests, including linger (i.e. watch and notify). However,
linger requests should always go to the primary even though
some of them are reads (e.g. notify has side effects but it
is a read because it doesn't result in mutation on the OSDs).
- calls to class methods that are reads are allowed to go to
the replica, but most such calls issued for "rbd map" and/or
exclusive lock transitions are requested to be resent to the
primary via EAGAIN, doubling the latency.
Get rid of global osd_req_flags and set read_from_replica flag
only on specific OSD requests instead.
Fixes: 8ad44d5e0d ("libceph: read_from_replica option")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
- OSD/MDS latency and caps cache metrics infrastructure for the
filesytem (Xiubo Li). Currently available through debugfs and
will be periodically sent to the MDS in the future.
- support for replica reads (balanced and localized reads) for
rbd and the filesystem (myself). The default remains to always
read from primary, users can opt-in with the new crush_location
and read_from_replica options. Note that reading from replica
is safe for general use only since Octopus.
- support for RADOS allocation hint flags (myself). Currently
used by rbd to propagate the compressible/incompressible hint
given with the new compression_hint map option and ready for
passing on more advanced hints, e.g. based on fadvise() from
the filesystem.
- support for efficient cross-quota-realm renames (Luis Henriques)
- assorted cap handling improvements and cleanups, particularly
untangling some of the locking (Jeff Layton)
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl7eZP0THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziwJDB/98bH+dsJidUkRctVerX933DvgmRGva
sIxR0otqCK2zlucKSy8R8awbhVQ2lz4DQm9vrlwFQHBjZqXnrMzDG4rd/PukmKap
l8DjHRgEsH698zjwDlyyz7/1ZqOOUcCKr5fly3Erqr92yWGoy2ve76LtTKgB5jnv
wdwMk5v/NBWoxZ3Q1cvexbCtc60l0FCSH4FnH7NtT8eR9zCmL9vlpZWdjKi+U5em
6tTONuSq+0F4a9eXEv6QHEjRjkRo1WlttGdK3bX7mXD4O22TslgKg9hYsVoQVTiW
Cc9n6Pggv2tbUnPgn/x342W26QyMgcoHCzrYPR7w0JrU61TzBewxqfpg
=4fqQ
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.8-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- OSD/MDS latency and caps cache metrics infrastructure for the
filesytem (Xiubo Li). Currently available through debugfs and will
be periodically sent to the MDS in the future.
- support for replica reads (balanced and localized reads) for rbd
and the filesystem (myself). The default remains to always read
from primary, users can opt-in with the new crush_location and
read_from_replica options. Note that reading from replica is safe
for general use only since Octopus.
- support for RADOS allocation hint flags (myself). Currently used by
rbd to propagate the compressible/incompressible hint given with
the new compression_hint map option and ready for passing on more
advanced hints, e.g. based on fadvise() from the filesystem.
- support for efficient cross-quota-realm renames (Luis Henriques)
- assorted cap handling improvements and cleanups, particularly
untangling some of the locking (Jeff Layton)"
* tag 'ceph-for-5.8-rc1' of git://github.com/ceph/ceph-client: (29 commits)
rbd: compression_hint option
libceph: support for alloc hint flags
libceph: read_from_replica option
libceph: support for balanced and localized reads
libceph: crush_location infrastructure
libceph: decode CRUSH device/bucket types and names
libceph: add non-asserting rbtree insertion helper
ceph: skip checking caps when session reconnecting and releasing reqs
ceph: make sure mdsc->mutex is nested in s->s_mutex to fix dead lock
ceph: don't return -ESTALE if there's still an open file
libceph, rbd: replace zero-length array with flexible-array
ceph: allow rename operation under different quota realms
ceph: normalize 'delta' parameter usage in check_quota_exceeded
ceph: ceph_kick_flushing_caps needs the s_mutex
ceph: request expedited service on session's last cap flush
ceph: convert mdsc->cap_dirty to a per-session list
ceph: reset i_requested_max_size if file write is not wanted
ceph: throw a warning if we destroy session with mutex still locked
ceph: fix potential race in ceph_check_caps
ceph: document what protects i_dirty_item and i_flushing_item
...
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
Switch all callers to map_kernel_range, which symmetric to the unmap side
(as well as the _noflush versions).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-17-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow indicating future I/O pattern via flags. This is supported since
Kraken (and bluestore persists flags together with expected_object_size
and expected_write_size).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Expose replica reads through read_from_replica=balance and
read_from_replica=localize. The default is to read from primary
(read_from_replica=no).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
OSD-side issues with reads from replica have been resolved in
Octopus. Reading from replica should be safe wrt. unstable or
uncommitted state now, so add support for balanced and localized
reads.
There are two cases when a read from replica can't be served:
- OSD may silently drop the request, expecting the client to
notice that the acting set has changed and resend via the usual
means (handled with t->used_replica)
- OSD may return EAGAIN, expecting the client to resend to the
primary, ignoring replica read flags (see handle_reply())
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Allow expressing client's location in terms of CRUSH hierarchy as
a set of (bucket type name, bucket name) pairs. The userspace syntax
"crush_location = key1=value1 key2=value2" is incompatible with mount
options and needed adaptation. Key-value pairs are separated by '|'
and we use ':' instead of '=' to separate keys from values. So for:
crush_location = host=foo rack=bar
one would write:
crush_location=host:foo|rack:bar
As in userspace, "multipath" locations are supported, so indicating
locality for parallel hierarchies is possible:
crush_location=rack:foo1|rack:foo2|datacenter:bar
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
These would be matched with the provided client location to calculate
the locality value.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Needed for the next commit and useful for ceph_pg_pool_info tree as
well. I'm leaving the asserting helper in for now, but we should look
at getting rid of it in the future.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Calculate the latency for OSD read requests. Add a new r_end_stamp
field to struct ceph_osd_request that will hold the time of that
the reply was received. Use that to calculate the RTT for each call,
and divide the sum of those by number of calls to get averate RTT.
Keep a tally of RTT for OSD writes and number of calls to track average
latency of OSD writes.
URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the TCP_NODELAY sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
OSD client should ignore cache/overlay flag if got redirect reply.
Otherwise, the client hangs when the cache tier is in forward mode.
[ idryomov: Redirects are effectively deprecated and no longer
used or tested. The original tiering modes based on redirects
are inherently flawed because redirects can race and reorder,
potentially resulting in data corruption. The new proxy and
readproxy tiering modes should be used instead of forward and
readforward. Still marking for stable as obviously correct,
though. ]
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/23296
URL: https://tracker.ceph.com/issues/36406
Signed-off-by: Jerry Lee <leisurelysw24@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- add SPDX header;
- adjust titles and chapters, adding proper markups;
- comment out text-only TOC from html/pdf output;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coverity complains about a double write to *p. Don't bother with
osd_instructions and directly skip to the end of redirect reply.
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_monc_handle_map() confuses static checkers which report a
false use-after-free on monc->monmap, missing that monc->monmap and
client->monc.monmap is the same pointer.
Use monc->monmap consistently and get rid of "old", which is redundant.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
