ACPI_ID_LEN is defined in mod_devicetable.h, so the header should
be guaranteed to included in ipu-bridge.h instead of the source
files which include ipu-bridge.h.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
is_claiming_log_addrs documentation was missing.
fix this kernel-doc warning:
include/media/cec.h:296: warning: Function parameter or struct member 'is_claiming_log_addrs' not described in 'cec_adapter'
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Keep track if cec_claim_log_addrs() is running, and return -EBUSY
if it is when calling CEC_ADAP_S_LOG_ADDRS.
This prevents a case where cec_claim_log_addrs() could be called
while it was still in progress.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: ca684386e6 ("[media] cec: add HDMI CEC framework (api)")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a header for the PCI device table of all IPU6 devices. This will be
used by the IPU bridge as well so place the table in a header.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add two new functions, v4l2_subdev_lock_states() and
v4l2_subdev_unclock_states(), to acquire and release the state of two
sub-devices. They differ from calling v4l2_subdev_{un,}lock_state() so
that if the two states share the same lock, the lock is acquired only
once.
Also use the new functions in v4l2_subdev_link_validate().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the owner field of the async sub-devices by making
v4l2_async_register_subdev() a macro and obtaining THIS_MODULE that way.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set a sub-device's owner field to the caller's module, provided as an
argument to the function. v4l2_device_register_subdev() becomes a macro
passing THIS_MODULE to the __v4l2_device_register_subdev() function.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
To support compilation with Media controller disabled, drivers were
required to conditionally call media_device_init and media_device_cleanup.
Add nop implementations of both so drivers don't need to care (or at least
care less).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After the conversion of dv timing calls to use a pad argument is done,
remove the old callbacks. Update the subdev ioctl handlers to use the
new callbacks.
Signed-off-by: Paweł Anikiel <panikiel@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Currently, subdev dv timing calls (i.e. g/s/query_dv_timings) are video
ops without a pad argument. This is a problem if the subdevice can have
different dv timings for each pad (e.g. a DisplayPort receiver with
multiple virtual channels).
To solve this, change these calls to include a pad argument, and put
them into pad ops. Keep the old ones temporarily to make the switch
easier.
Signed-off-by: Paweł Anikiel <panikiel@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Create v4l2-mem2mem helpers for VIDIOC_REMOVE_BUFS ioctl and
make test drivers use it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
VIDIOC_REMOVE_BUFS ioctl allows to remove buffers from a queue.
The number of buffers to remove in given by count field of
struct v4l2_remove_buffers and the range start at the index
specified in the same structure.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: vidioc-remove-bufs.rst: mention no bufs are freed on error]
Add a bitmap field to know which of bufs array entries are
used or not.
Remove no more used num_buffers field from queue structure.
Use bitmap_find_next_zero_area() to find the first possible
range when creating new buffers to fill the gaps.
If no suitable range is found try to allocate less buffers
than requested.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When REMOVE_BUFS will be introduced holes could created in bufs array.
To be able to reuse these unused indices reworking how create->index
is set is mandatory.
Let __vb2_queue_alloc() decide which first index is correct and
forward this to the caller.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add 'min_reqbufs_allocation' field in the vb2_queue structure so drivers
can specify the minimum number of buffers to allocate when calling
VIDIOC_REQBUFS.
When initializing the queue, v4l2 core makes sure that the following
constraints are respected:
- the minimum number of buffers to allocate must be at least 2 because
one buffer is used by the hardware while the other is being processed
by userspace.
-if the driver needs 'min_queued_buffers' in the queue before calling
start_streaming(), then the minimum requirement is 'min_queued_buffers + 1'
to keep at least one buffer available for userspace.
Simplify __vb2_init_fileio() by using 'min_reqbufs_allocation' directly
to avoid duplicating the minimum number of buffers to allocate computation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Do not rely on the number of allocated buffers to know if the
queue is busy but on a flag set when at least one buffer has been allocated
by REQBUFS or CREATE_BUFS ioctl.
The flag is reset when REQBUFS is called with count = 0 or the file
handle is closed.
This is needed because remove buffers feature will be able to remove
all the buffers from a queue while streaming so relying on the number
of allocated buffers in the queue won't be possible.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=YxyV
-----END PGP SIGNATURE-----
Merge tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- DVB budget legacy API was finally documented. It took only 20+ years
to get some documentation about it...
- hantro driver has gained support for STM32MP25 VDEC/VENC
- rkisp1 has gained support for i.MX8MP
- atomisp got rid of two items from its todo list. Still 5 items
pending for moving it out of staging
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits)
media: rcar-isp: Disallow unbind of devices
media: usbtv: Remove useless locks in usbtv_video_free()
media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
media: ttpci: fix two memleaks in budget_av_attach
media: go7007: fix a memleak in go7007_load_encoder
media: dvb-frontends: avoid stack overflow warnings with clang
media: pvrusb2: fix uaf in pvr2_context_set_notify
media: usb: s2255: Refactor s2255_get_fx2fw
media: ti: j721e-csi2rx: Convert to platform remove callback returning void
media: stm32-dcmipp: Convert to platform remove callback returning void
media: nxp: imx8-isi: Convert to platform remove callback returning void
media: nuvoton: Convert to platform remove callback returning void
media: chips-media: wave5: Convert to platform remove callback returning void
media: chips-media: wave5: Remove unnecessary semicolons
media: i2c: imx290: Fix IMX920 typo
media: platform: replace of_graph_get_next_endpoint()
media: i2c: replace of_graph_get_next_endpoint()
media: ivsc: csi: Make use of sub-device state
media: ivsc: csi: Swap SINK and SOURCE pads
media: ipu-bridge: Serialise calls to IPU bridge init
...
While at it rearrange other comments to match the order of struct members.
Fixes: d65842f712 ("media: vb2: add waiting_in_dqbuf flag")
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In commit 8caab75fd2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.
To be able to remove these compatibility macros push the renaming into
v4l2_spi_new_subdev().
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/b6e3a53ce75dfb8a21a5958a381070944dfa0875.1707324794.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Maintain a counter of the links connected to a pad in the media_pad
structure. This helps checking if a pad is connected to anything, which
will be used in the pipeline building code.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Building the kerneldoc resulted in two errors:
Documentation/media/driver-api/v4l2-common:6: ./include/media/v4l2-common.h:566: ERROR: Unexpected indentation.
Documentation/media/driver-api/v4l2-common:6: ./include/media/v4l2-common.h:567: WARNING: Block quote ends without a blank line; unexpected unindent.
Format v4l2_link_freq_to_bitmap according to the kerneldoc standard.
The v4l2_fill_pixfmt_mp function also had incorrect return value
formatting, although that didn't report an error/warning, but it looked
ugly in the generated documentation. So fix that one as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: a68e88e2cf ("media: v4l: Add a helper for setting up link-frequencies control")
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The fields are gone, remove their documentation.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The documented struct member is called "planes" rather than "vb2_plane".
While at it, make the comments order follow struct members order.
Fixes: 2b14132455 ("media: vb2-core: Improve kernel-doc markups")
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a helper for obtaining supported link frequencies in form most drivers
need them. The result is a bitmap of supported controls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the @major: and @minor: lines to prevent the kernel-doc warnings:
include/media/media-entity.h:376: warning: Excess struct member 'major' description in 'media_entity'
include/media/media-entity.h:376: warning: Excess struct member 'minor' description in 'media_entity'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rename min_buffers_needed into min_queued_buffers and update
the documentation about it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: Drop the change where min_queued_buffers + 1 buffers would be]
[hverkuil: allocated. Now this patch only renames this field instead of making]
[hverkuil: a functional change as well.]
[hverkuil: Renamed 3 remaining min_buffers_needed occurrences.]
Subdev states store all standard pad configuration data, except for
frame intervals. Fix it by adding interval fields in the
v4l2_subdev_pad_config and v4l2_subdev_stream_config structures, with
corresponding accessor functions and a helper function to implement the
.get_frame_interval() operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The subdev .[gs]_frame_interval are video operations, but they operate
on pads (and even on streams). Not only is this confusing, it causes
practical issues for drivers as the operations don't receive a subdev
state pointer, requiring manual state handling.
To improve the situation, turn the operations into pad operations, and
extend them to receive a state pointer like other pad operations.
While at it, rename the operations to .[gs]et_frame_interval at the same
time to match the naming scheme of other pad operations. This isn't
strictly necessary, but given that all drivers using those operations
need to be modified, handling the rename separately would generate more
churn for very little gain (if at all).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-media
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for tegra-video
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The subdev state locking macros and macros to get the active state are
currently behind CONFIG_MEDIA_CONTROLLER. This makes sense, as there can
be no subdev state without MC.
However, we have code paths common to MC and non-MC cases which call
subdev operations that have subdev state as a parameter. In the non-MC
case the state parameter would always be NULL.
Thus it makes sense to allow, e.g.:
v4l2_subdev_call_state_active(sd, pad, get_fmt, fmt)
which for non-MC case would call the subdev passing NULL as the state.
This currently fails:
https://lore.kernel.org/oe-kbuild-all/202312061101.PLrz5NnJ-lkp@intel.com/
Fix the issue by moving the related macros to be outside
CONFIG_MEDIA_CONTROLLER. The v4l2_subdev_lock_state() and
v4l2_subdev_unlock_state() macros will crash if given NULL as the state,
but the other macros behave correctly even when there's no active state,
and they will only call the lock/unlock macros if there is a state.
An alternative fix would be to make another version of
v4l2_subdev_call_state_try() with ifdefs, which would not use any state
macros and would always pass NULL as the state. But having two version
of a macro/function is always more confusing than having just one, so I
went this way.
So, this fixes the v4l2_subdev_call_state_active() macro. But we also
have v4l2_subdev_call_state_try(). It would be possible to fix that
macro by additionally creating "no-op" variants of the state alloc and
free functions. However, v4l2_subdev_call_state_try() is only used by a
single driver (stm32-dcmi), which selects MC, and the macro is supposed
to be removed as soon as the users have been converted away from the
macro. Thus I have not touched the state alloc/free functions, and I
think it makes sense to keep alloc/free functions available only if
there's actually something that can be allocated or freed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20231208-v4l2-state-mc-fix-v1-1-a0c8162557c6@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some sensors, e.g. Sony IMX290, are using little-endian registers. Add
support for those by encoding the endianness into Bit 20 of the register
address.
Fixes: af73323b97 ("media: imx290: Convert to new CCI register access helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add CCI_REG_WIDTH() macro to obtain register width in bits and similarly,
CCI_REG_WIDTH_BYTES() to obtain it in bytes.
Also add CCI_REG_ADDR() macro to obtain the address of a register.
Use both macros in v4l2-cci.c, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Provide a few bits for drivers to store private information on register
definitions.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
linux/bits.h is needed for GENMASK(). Include it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The subdev .init_cfg() operation is affected by two issues:
- It has long been extended to initialize a whole v4l2_subdev_state
instead of just a v4l2_subdev_pad_config, but its name has stuck
around.
- Despite operating on a whole subdev state and not being directly
exposed to the subdev users (either in-kernel or through the userspace
API), .init_cfg() is categorized as a subdev pad operation.
This participates in making the subdev API confusing for new developers.
Fix it by renaming the operation to .init_state(), and make it a subdev
internal operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net> # for imx415
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # for vimc
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Remove stream-unaware sub-device state access functions and macros. These
are no longer used.
[Sakari Ailus: Resolve a minor conflict in removed code.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Compile sub-device state information access functions
v4l2_subdev_state_get_{format,crop,compose} unconditionally as they are
now also used by plain V4L2 drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sub-device state access functions take three arguments: sub-device
state, pad and stream. The stream is not relevant for the majority of
drivers and having to specify 0 for the stream is considered a nuisance.
Provide a two-argument macros for these state access functions to cover
the needs of stream-unaware users.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rename the sub-devices state information access functions, removing
"_stream" from them and replacing "format" by "ffmt". This makes them
shorter and so more convenient to use. No other sets of functions will be
needed to access this information.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are two sets of functions that return information from sub-device
state, one for stream-unaware users and another for stream-aware users.
Add support for stream-aware functions to return format, crop and compose
information from pad-based array that are functionally equivalent to the
old, stream-unaware ones.
Also check state is non-NULL, in order to guard against old drivers
potentially calling this with NULL state for active formats or selection
rectangles.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Store the sub-device in the sub-device state. This will be needed in e.g.
validating pad number when retrieving information for non-stream-aware
users. There are expected to be more needs for this in the future.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
V4L2 subdev operations have moved from operating on a
v4l2_subdev_pad_config to a v4l2_subdev_state a long time ago. Fix the
few remaining incorrect references to pad config in the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The v4l2_subdev_pad_config structure is not passed to subdev operations
anymore. Drop an outdated comment to refers to that old mechanism.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The try_fmt, try_crop and try_compose fields of the
v4l2_subdev_pad_config structure are misnamed (for historical reason) as
they also store data for the subdev active configuration. Rename them to
format, crop and compose respectively and update the accessor helpers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The comment describing the function v4l2_m2m_last_src_buf() says that this
function returns the last destination buffer when it actually returns the
last source buffer. Fix the comment so that it is accurate.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Count how many Low Drive, Error and Arbitration Lost transmit
status errors occurred, and expose that in debugfs.
Also log the first 8 transmits that result in Low Drive or Error
conditions. That really should not happen with well-behaved CEC devices
and good HDMI cables.
This is useful to detect and debug HDMI cable issues.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add 'max_num_buffers' field in vb2_queue struct to let drivers decide
how many buffers could be stored in a queue.
This require 'bufs' array to be allocated at queue init time and freed
when releasing the queue.
By default VB2_MAX_FRAME remains the limit.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In the future a side effect of introducing DELETE_BUFS ioctl is
the create of 'holes' (i.e. unused buffers) in bufs arrays.
To know which entries of the bufs arrays are used a bitmap will
be added in struct vb2_queue. That will also mean that the number
of buffers will be computed given the number of bit set in this bitmap.
To smoothly allow this evolution all drives must stop using
directly num_buffers field from struct vb2_queue.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Directly use vb2_buffer pointer instead of index inside queue array.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a new flag to the `struct v4l2_m2m_dev` to toggle whether a queue
must be streaming in order to allow queuing jobs to the ready queue.
Currently, both queues (CAPTURE & OUTPUT) must be streaming in order to
allow adding new jobs. This behavior limits the usability of M2M for
some drivers, as these have to be able, to perform analysis of the
sequence to ensure, that userspace prepares the CAPTURE queue correctly.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a definition for MIPI CSI-2 generic long packet types. The generic
long packet types are numbered from 1 to 4.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for
struct v4l2_subscribed_event.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: lijian <lijian@yulong.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Don't use defines for the size of a name field, everyone
should just use sizeof(). In this case it was never used,
but it is bad practice, so just drop it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Don't rely on a define, let the compiler use the actual
field size.
Remove all uses of the V4L2_SUBDEV_NAME_SIZE define and also
drop the define itself.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes this compiler warning:
drivers/media/cec/core/cec-core.c: In function 'cec_allocate_adapter':
drivers/media/cec/core/cec-core.c:317:21: warning: '/input0' directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Wformat-truncation=]
317 | "%s/input0", adap->name);
| ^~~~~~~
drivers/media/cec/core/cec-core.c:316:9: note: 'snprintf' output between 8 and 39 bytes into a destination of size 32
316 | snprintf(adap->input_phys, sizeof(adap->input_phys),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
317 | "%s/input0", adap->name);
| ~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes this compiler warning:
In file included from include/linux/property.h:14,
from include/linux/acpi.h:16,
from drivers/media/pci/intel/ipu-bridge.c:4:
In function 'ipu_bridge_init_swnode_names',
inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: warning: '%u' directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Wformat-truncation=]
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/fwnode.h: In function 'ipu_bridge_connect_sensor':
include/linux/fwnode.h:81:55: note: format string is defined here
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~
In function 'ipu_bridge_init_swnode_names',
inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: note: directive argument in the range [0, 255]
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:382:9: note: 'snprintf' output between 7 and 9 bytes into a destination of size 7
382 | snprintf(sensor->node_names.remote_port,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
383 | sizeof(sensor->node_names.remote_port),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The last driver that still used this old framework has been converted
to the videobuf2 framework. So it is now time to delete the old videobuf
code.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The subdev .s_stream() operation must not be called to start an already
started subdev, or stop an already stopped one. This requirement has
never been formally documented. Fix it, and catch possible offenders
with a WARN_ON() in the call_s_stream() wrapper.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Routing support, through the subdev .set_routing() operation, requires
the subdev to support streams. This is however not clearly documented
anywhere. Fix it by expanding the operation's documentation to indicate
that subdevs must set the V4L2_SUBDEV_FL_STREAMS flag.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The v4l2_pipeline_pm_get() and v4l2_pipeline_pm_put() functions were
needed to control sub-devices' power states before runtime PM. These
functions should no longer be used, and instead sub-device drivers should
use runtime PM.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=yuz5
-----END PGP SIGNATURE-----
Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
Previously on ACPI platforms, sensors that are intended to be connected
to an IPU device for use with the ipu3-cio2 driver lacking the necessary
connection information in firmware. IPU bridge driver is to connect
sensors to IPU device via software nodes.
Currently IVSC located between IPU device and sensors is available in
existing commercial platforms from multiple OEMs. But the connection
information between them in firmware is also not enough to build V4L2
connection graph. This patch parses the connection properties from the
SSDB buffer in DSDT and build the connection using software nodes.
IVSC driver is based on MEI framework (previously known as HECI), it
has two MEI clients, MEI CSI and MEI ACE. Both clients are used to
communicate messages with IVSC firmware. Linux abstracts MEI client
as a device, whose bus type is MEI. And the device is addressed by a
GUID/UUID which is part of the device name of MEI client. After figured
out MEI CSI via the UUID composed device name, this patch setup the
connection between MEI CSI and IPU, and the connection between MEI CSI
and sensor via software nodes.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In most cases when a VCM is used there is a single integrated module
with the sensor + VCM + lens. This means that the sensor and VCM often
share regulators and possibly also something like a powerdown pin.
In the ACPI tables this is modelled as a single ACPI device with
multiple I2cSerialBus resources.
On atomisp devices the regulators and clks are modelled as ACPI
power-resources, which are controlled by the (ACPI) power state
of the sensor. So the sensor must be in D0 power state for the VCM
to work.
To make this work add a device-link with DL_FLAG_PM_RUNTIME flag
so that the sensor will automatically be runtime-resumed whenever
the VCM is runtime-resumed.
This requires the probing of the VCM and thus the creation of the VCM
I2C-client to be delayed till after the sensor driver has bound.
Move the instantiation of the VCM I2C-client to the v4l2_async_notifier
bound op, so that it is done after the sensor driver has bound; and
add code to add the device-link.
This fixes the problem with the shared ACPI power-resources on atomisp2
and this avoids the need for VCM related workarounds on IPU3 / IPU6.
E.g. until now the dw9719 driver needed to get and control a Vsio
(V sensor IO) regulator since that needs to be enabled to enable I2C
pass-through on the PMIC on the sensor module. So the driver was
controlling this regulator even though the actual dw9719 chip has no
Vsio pin / power-plane.
This also removes the need for ipu_bridge_init() to return
-EPROBE_DEFER since the VCM is now instantiated later.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move ipu-bridge.h to include/media/, so that it can also be used by
the atomisp code.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The helpers in this header are not used anywhere anymore,
they have been superseded by the new CCI register access helpers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CSI2 specification specifies a standard method to access camera sensor
registers called "Camera Control Interface (CCI)".
This uses either 8 or 16 bit (big-endian wire order) register addresses
and supports 8, 16, 24 or 32 bit (big-endian wire order) register widths.
Currently a lot of Linux camera sensor drivers all have their own custom
helpers for this, often copy and pasted from other drivers.
Add a set of generic helpers for this so that all sensor drivers can
switch to a single common implementation.
These helpers take an extra optional "int *err" function parameter,
this can be used to chain a bunch of register accesses together with
only a single error check at the end, rather than needing to error
check each individual register access. The first failing call will
set the contents of err to a non 0 value and all other calls will
then become no-ops.
Link: https://lore.kernel.org/linux-media/59aefa7f-7bf9-6736-6040-39551329cd0a@redhat.com/
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The routing parameter of v4l2_subdev_set_routing_with_fmt() is missing
'const'. Add it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The adap_configured() callback was called with the adap->lock mutex
held if the 'configured' argument was false, and without the adap->lock
mutex held if that argument was true.
That was very confusing, and so split this up in a adap_unconfigured()
callback and a high-level configured() callback.
This also makes it easier to understand when the mutex is held: all
low-level adap_* callbacks are called with the mutex held. All other
callbacks are called without that mutex held.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: f1b5716430 ("media: cec: add optional adap_configured callback")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A potential deadlock was found by Zheng Zhang with a local syzkaller
instance.
The problem is that when a non-blocking CEC transmit is canceled by calling
cec_data_cancel, that in turn can call the high-level received() driver
callback, which can call cec_transmit_msg() to transmit a new message.
The cec_data_cancel() function is called with the adap->lock mutex held,
and cec_transmit_msg() tries to take that same lock.
The root cause is that the received() callback can either be used to pass
on a received message (and then adap->lock is not held), or to report a
canceled transmit (and then adap->lock is held).
This is confusing, so create a new low-level adap_nb_transmit_canceled
callback that reports back that a non-blocking transmit was canceled.
And the received() callback is only called when a message is received,
as was the case before commit f9d0ecbf56 ("media: cec: correctly pass
on reply results") complicated matters.
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: f9d0ecbf56 ("media: cec: correctly pass on reply results")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set the v4l2_device already in async notifier init, so struct device
related to it will be available before the notifier is registered. This
requires separating notifier initialisation into two functions, one that
takes v4l2_device as its argument, v4l2_async_nf_init and
v4l2_async_subdev_nf_init, for sub-device notifiers. Registering the
notifier will use a single function, v4l2_async_nf_register.
This is done in order to make struct device available earlier, during
construction of the async connections, for sensible debug prints.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Support matching V4L2 async sub-devices based on particular fwnode
endpoint. This makes it possible to instantiate multiple V4L2 sub-devices
based on given fwnode endpoints from a single device, based on driver
needs.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the v4l2-async framework was introduced, the use case for it was to
connect a camera sensor with a parallel receiver. Both tended to be rather
simple devices with a single connection between them.
The framework has been since improved in multiple ways but there are
limitations that have remained, for instance the assumption an async
sub-device is connected towards a single notifier and via a single link
only.
This patch enables connecting a sub-device to one or more notifiers
simultaneously, with one or more connections per notifier. The notifier
information is moved from the sub-device to the connection and the
connections in sub-device are no longer a pointer but a linked list.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add v4l2_async_connection_unique() function for obtaining a struct
v4l2_async_connection, typically allocated by drivers together with their
own information on an external sub-device.
The relation between connections and sub-devices still remains 1:1 but
this code becomes more complex when the relation soon changes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch re-arranges internal V4L2 async lists for preparation of
supporting multiple connections per sub-device as well as cleaning up used
lists.
The list of unbound V4L2 sub-devices shall be maintained for the purpose of
listing those sub-devices only, not for their bindin status. Also, the V4L2
async connections now have, instead of two list entries, a single list
entry in the notifier's list, be that either waiting or done lists, while
the notifier's asc_list is removed.
The one-to-one relation between a sub-device and a connection is still
maintained in this patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rename v4l2_async_subdev as v4l2_async_connection, in order to
differentiate between the sub-devices and their connections: one
sub-device can have many connections but the V4L2 async framework has so
far allowed just a single one. Connections in this context will later
translate into either MC ancillary or data links.
This patch prepares changing that relation by changing existing users of
v4l2_async_subdev to switch to v4l2_async_connection. Async sub-devices
themselves will not be needed anymore
Additionally, __v4l2_async_nf_add_subdev() has been renamed
__v4l2_async_nf_add_connection().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The naming of list heads and list entries is confusing as they're named
similarly. Use _list for list head and _entry for list entries.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The async match type is a struct field now, rename V4L2_ASYNC_MATCH_*
macros as V4L2_ASYNC_MATCH_TYPE_* instead.
This patch has been produced by:
git grep -l V4L2_ASYNC_MATCH_ -- drivers/media/ drivers/staging/media/ \
include/ Documentation/|xargs perl -i -pe \
's/V4L2_ASYNC_MATCH_\K/TYPE_/g'
so it must be correct.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Make V4L2 async match information a struct, making it easier to use it
elsewhere outside the scope of struct v4l2_async_subdev.
Also remove an obsolete comment --- none of these fields are supposed to
be touched by drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The v4l2_async_nf_parse_fwnode_endpoints() function, part of
v4l2-fwnode.c, was a helper meant to register one async sub-dev for each
fwnode endpoint of a device.
The function is marked as deprecated in the documentation and is actually
not used anywhere anymore. Drop it and remove the helper function
v4l2_async_nf_fwnode_parse_endpoint() from v4l2-fwnode.c.
This change allows to make the helper function
__v4l2_async_nf_add_connection() visibility private to v4l2-async.c so
that there is no risk drivers can mistakenly use it.
[Sakari Ailus: Small fixups on top.]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for TI DS90UB960 FPD-Link III Deserializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YwIy
-----END PGP SIGNATURE-----
Merge tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Lots of improvement at atomisp driver, which is starting to look in
good shape
- Mediatek vcodec driver has gained support for av1 and hevc stateless
codecs
- New sensor driver: ov01a10
- verisilicon driver has gained AV1 entropy helpers
- tegra-video has gained support for Tegra20 parallel input
- dvb core has gained an extra property to better support DVB-S2X
- as usual, lots of cleanups, fixes and improvements on media drivers
* tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits)
media: wl128x: fix a clang warning
media: dvb: mb86a20s: get rid of a clang-15 warning
media: cec: i2c: ch7322: also select REGMAP
media: add HAS_IOPORT dependencies
media: tc358746: select CONFIG_GENERIC_PHY
media: mediatek: vcodec: Add dbgfs help function
media: mediatek: vcodec: Add encode to support dbgfs
media: mediatek: vcodec: Change dbgfs interface to support encode
media: mediatek: vcodec: Get each instance format type
media: mediatek: vcodec: Get each context resolution information
media: mediatek: vcodec: Add a debugfs file to get different useful information
media: mediatek: vcodec: Add debug params to control different log level
media: mediatek: vcodec: Add debugfs interface to get debug information
media: mediatek: vcodec: support stateless AV1 decoder
media: verisilicon: Conditionally ignore native formats
media: verisilicon: Enable AV1 decoder on rk3588
media: verisilicon: Add film grain feature to AV1 driver
media: verisilicon: Add Rockchip AV1 decoder
media: verisilicon: Add AV1 entropy helpers
media: verisilicon: Compute motion vectors size for AV1 frames
...
Fraction bytes-per-pixel exist for some packed format. You will find
notably on Rockhip platform that 10bit data is stored fully packed,
meaning that there is 1.25 pixels per bytes. This can be represented
with the fraction 5/4 and can be used to scale the width into a
bytesperline.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch adds the AOMedia Video 1 (AV1) kernel uAPI.
This design is based on currently available AV1 API implementations and
aims to support the development of AV1 stateless video codecs
on Linux.
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmR80iseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhxkH/2+2NEZjO5SCj9z6
FGrJunmXMOqoryoC3oL953Zhp3oeB/gB7GDdFQLg8tv0QprD6W0L9uorIgFi3lWU
doGWKSjFVEdu6RoUV09bTwm1DislZKJF3NCwTyeb44c3HnTzUvd/zFrY29YNRi9C
j5KXQIq91dke3qQi/3uCLFRKvmr2ss/lXapScwXFhQjaM2VmAMc51xIxkuRz3H01
EmcbJx3Rj9zPxx3Nc7ONMvtHE5+xuVsMdq3dLFCS9Xc/f+qbCCQdRIy9AjaRuR4c
F5nRjwDjq0iv2diF0gK4WtD8fvxVuLaqS0RAi0jsOKVfLphLwkqkPQbbMd5K8qwJ
xTNAiW0=
=FwWR
-----END PGP SIGNATURE-----
Merge tag 'v6.4-rc5' into media_stage
Linux 6.4-rc5
* tag 'v6.4-rc5': (919 commits)
Linux 6.4-rc5
leds: qcom-lpg: Fix PWM period limits
selftests/ftrace: Choose target function for filter test from samples
KVM: selftests: Add test for race in kvm_recalculate_apic_map()
KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds
KVM: x86: Account fastpath-only VM-Exits in vCPU stats
KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK
KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
tpm, tpm_tis: correct tpm_tis_flags enumeration values
Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits"
media: uvcvideo: Don't expose unsupported formats to userspace
media: v4l2-subdev: Fix missing kerneldoc for client_caps
media: staging: media: imx: initialize hs_settle to avoid warning
media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad()
riscv: Implement missing huge_ptep_get
riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT
module/decompress: Fix error checking on zstd decompression
fork, vhost: Use CLONE_THREAD to fix freezer/ps regression
dt-bindings: serial: 8250_omap: add rs485-rts-active-high
selinux: don't use make's grouped targets feature yet
...
Add missing kernel doc for the new 'client_caps' field in struct
v4l2_subdev_fh.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: f57fa29592 ("media: v4l2-subdev: Add new ioctl for client capabilities")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use the pad flag specifying the pad type instead of a boolean in
preparation for internal source pads.
Also make the loop variable unsigned.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
fwnode_graph_parse_endpoint() fwnode argument is now const, therefore make
media_entity_get_fwnode_pad() fwnode argument const as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When compile-testing on mips/RB532 with W=1:
arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
13 | #define RST (1 << 15)
|
drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_parse.c:15: warning: "RST" redefined
15 | #define RST 0xd0
|
drivers/media/platform/renesas/rcar_jpu.c:77: warning: "RST" redefined
77 | #define RST 0xd0
|
"RST" is indeed a name too short to be conflict-free.
Fix this by creating a common <media/jpeg.h> header file, containing
definitions for all JPEG markers used, prefixed by "JPEG_MARKER_", based
on the existing private definitions in the Samsung S5P JPEG driver, and
convert all affected drivers.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304152346.hJOPxPRh-lkp@intel.com/
Link: https://lore.kernel.org/oe-kbuild-all/202304150059.bHUyuriy-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> (s5p-jpeg)
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Getting below error when using KCSAN to check the driver. Adding lock to
protect parameter num_rdy when getting the value with function:
v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready.
kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue
kworker/u16:3: [name:report&]
kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7:
kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c
Signed-off-by: Pina Chen <pina.chen@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some kernel-doc warnings in <media/dvbdev.h> were introduced. A fixup
patch addressed them was already merged, but Randy's approach from:
https://lore.kernel.org/linux-media/20221203060931.19953-1-rdunlap@infradead.org
Had some advantages, as it moves the @dvbdev to the right place inside
dvb_remove_device() documentation and it makes clearer about what
refcounter struct dvb_device refers to.
So, apply the changes suggested by Randy.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
dvb_register_device() dynamically allocates fops with kmemdup()
to set the fops->owner.
And these fops are registered in 'file->f_ops' using replace_fops()
in the dvb_device_open() process, and kfree()d in dvb_free_device().
However, it is not common to use dynamically allocated fops instead
of 'static const' fops as an argument of replace_fops(),
and UAF may occur.
These UAFs can occur on any dvb type using dvb_register_device(),
such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc.
So, instead of kfree() the fops dynamically allocated in
dvb_register_device() in dvb_free_device() called during the
.disconnect() process, kfree() it collectively in exit_dvbdev()
called when the dvbdev.c module is removed.
Link: https://lore.kernel.org/linux-media/20221117045925.14297-4-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A race condition may occur between the .disconnect function, which
is called when the device is disconnected, and the dvb_device_open()
function, which is called when the device node is open()ed.
This results in several types of UAFs.
The root cause of this is that you use the dvb_device_open() function,
which does not implement a conditional statement
that checks 'dvbnet->exit'.
So, add 'remove_mutex` to protect 'dvbnet->exit' and use
locked_dvb_net_open() function to check 'dvbnet->exit'.
[mchehab: fix a checkpatch warning]
Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If the device node of dvb_frontend is open() and the device is
disconnected, many kinds of UAFs may occur when calling close()
on the device node.
The root cause of this is that wake_up() for dvbdev->wait_queue
is implemented in the dvb_frontend_release() function, but
wait_event() is not implemented in the dvb_frontend_stop() function.
So, implement wait_event() function in dvb_frontend_stop() and
add 'remove_mutex' which prevents race condition for 'fe->exit'.
[mchehab: fix a couple of checkpatch warnings and some mistakes at the error handling logic]
Link: https://lore.kernel.org/linux-media/20221117045925.14297-2-imv4bel@gmail.com
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sr030pc30 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v2.6.37. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
