mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 06:09:56 +00:00
loongarch-next
81 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Peter Zijlstra
|
56180dd20c |
futex: Use RCU-based per-CPU reference counting instead of rcuref_t
The use of rcuref_t for reference counting introduces a performance bottleneck when accessed concurrently by multiple threads during futex operations. Replace rcuref_t with special crafted per-CPU reference counters. The lifetime logic remains the same. The newly allocate private hash starts in FR_PERCPU state. In this state, each futex operation that requires the private hash uses a per-CPU counter (an unsigned int) for incrementing or decrementing the reference count. When the private hash is about to be replaced, the per-CPU counters are migrated to a atomic_t counter mm_struct::futex_atomic. The migration process: - Waiting for one RCU grace period to ensure all users observe the current private hash. This can be skipped if a grace period elapsed since the private hash was assigned. - futex_private_hash::state is set to FR_ATOMIC, forcing all users to use mm_struct::futex_atomic for reference counting. - After a RCU grace period, all users are guaranteed to be using the atomic counter. The per-CPU counters can now be summed up and added to the atomic_t counter. If the resulting count is zero, the hash can be safely replaced. Otherwise, active users still hold a valid reference. - Once the atomic reference count drops to zero, the next futex operation will switch to the new private hash. call_rcu_hurry() is used to speed up transition which otherwise might be delay with RCU_LAZY. There is nothing wrong with using call_rcu(). The side effects would be that on auto scaling the new hash is used later and the SET_SLOTS prctl() will block longer. [bigeasy: commit description + mm get/ put_async] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20250710110011.384614-3-bigeasy@linutronix.de |
||
|
Nysal Jan K.A.
|
7ab02bd36e |
sched/membarrier: Fix redundant load of membarrier_state
On architectures where ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
is not selected, sync_core_before_usermode() is a no-op.
In membarrier_mm_sync_core_before_usermode() the compiler does not
eliminate redundant branches and load of mm->membarrier_state
for this case as the atomic_read() cannot be optimized away.
Here's a snippet of the code generated for finish_task_switch() on powerpc
prior to this change:
1b786c: ld r26,2624(r30) # mm = rq->prev_mm;
.......
1b78c8: cmpdi cr7,r26,0
1b78cc: beq cr7,1b78e4 <finish_task_switch+0xd0>
1b78d0: ld r9,2312(r13) # current
1b78d4: ld r9,1888(r9) # current->mm
1b78d8: cmpd cr7,r26,r9
1b78dc: beq cr7,1b7a70 <finish_task_switch+0x25c>
1b78e0: hwsync
1b78e4: cmplwi cr7,r27,128
.......
1b7a70: lwz r9,176(r26) # atomic_read(&mm->membarrier_state)
1b7a74: b 1b78e0 <finish_task_switch+0xcc>
This was found while analyzing "perf c2c" reports on kernels prior
to commit
|
||
|
Michal Hocko
|
9a8da05d7a |
Revert "mm: introduce PF_MEMALLOC_NORECLAIM, PF_MEMALLOC_NOWARN"
This reverts commit
|
||
|
Mark Brown
|
540e00a729 |
mm: pass vm_flags to generic_get_unmapped_area()
In preparation for using vm_flags to ensure guard pages for shadow stacks supply them as an argument to generic_get_unmapped_area(). The only user outside of the core code is the PowerPC book3s64 implementation which is trivially wrapping the generic implementation in the radix_enabled() case. No functional changes. Link: https://lkml.kernel.org/r/20240904-mm-generic-shadow-stack-guard-v2-2-a46b8b6dc0ed@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mark Brown
|
25d4054cc9 |
mm: make arch_get_unmapped_area() take vm_flags by default
Patch series "mm: Care about shadow stack guard gap when getting an unmapped area", v2. As covered in the commit log for |
||
|
Rick Edgecombe
|
961148704a |
mm: introduce arch_get_unmapped_area_vmflags()
When memory is being placed, mmap() will take care to respect the guard
gaps of certain types of memory (VM_SHADOWSTACK, VM_GROWSUP and
VM_GROWSDOWN). In order to ensure guard gaps between mappings, mmap()
needs to consider two things:
1. That the new mapping isn't placed in an any existing mappings guard
gaps.
2. That the new mapping isn't placed such that any existing mappings
are not in *its* guard gaps.
The longstanding behavior of mmap() is to ensure 1, but not take any care
around 2. So for example, if there is a PAGE_SIZE free area, and a mmap()
with a PAGE_SIZE size, and a type that has a guard gap is being placed,
mmap() may place the shadow stack in the PAGE_SIZE free area. Then the
mapping that is supposed to have a guard gap will not have a gap to the
adjacent VMA.
In order to take the start gap into account, the maple tree search needs
to know the size of start gap the new mapping will need. The call chain
from do_mmap() to the actual maple tree search looks like this:
do_mmap(size, vm_flags, map_flags, ..)
mm/mmap.c:get_unmapped_area(size, map_flags, ...)
arch_get_unmapped_area(size, map_flags, ...)
vm_unmapped_area(struct vm_unmapped_area_info)
One option would be to add another MAP_ flag to mean a one page start gap
(as is for shadow stack), but this consumes a flag unnecessarily. Another
option could be to simply increase the size passed in do_mmap() by the
start gap size, and adjust after the fact, but this will interfere with
the alignment requirements passed in struct vm_unmapped_area_info, and
unknown to mmap.c. Instead, introduce variants of
arch_get_unmapped_area/_topdown() that take vm_flags. In future changes,
these variants can be used in mmap.c:get_unmapped_area() to allow the
vm_flags to be passed through to vm_unmapped_area(), while preserving the
normal arch_get_unmapped_area/_topdown() for the existing callers.
Link: https://lkml.kernel.org/r/20240326021656.202649-4-rick.p.edgecombe@intel.com
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Rick Edgecombe
|
529ce23a76 |
mm: switch mm->get_unmapped_area() to a flag
The mm_struct contains a function pointer *get_unmapped_area(), which is set to either arch_get_unmapped_area() or arch_get_unmapped_area_topdown() during the initialization of the mm. Since the function pointer only ever points to two functions that are named the same across all arch's, a function pointer is not really required. In addition future changes will want to add versions of the functions that take additional arguments. So to save a pointers worth of bytes in mm_struct, and prevent adding additional function pointers to mm_struct in future changes, remove it and keep the information about which get_unmapped_area() to use in a flag. Add the new flag to MMF_INIT_MASK so it doesn't get clobbered on fork by mmf_init_flags(). Most MM flags get clobbered on fork. In the pre-existing behavior mm->get_unmapped_area() would get copied to the new mm in dup_mm(), so not clobbering the flag preserves the existing behavior around inheriting the topdown-ness. Introduce a helper, mm_get_unmapped_area(), to easily convert code that refers to the old function pointer to instead select and call either arch_get_unmapped_area() or arch_get_unmapped_area_topdown() based on the flag. Then drop the mm->get_unmapped_area() function pointer. Leave the get_unmapped_area() pointer in struct file_operations alone. The main purpose of this change is to reorganize in preparation for future changes, but it also converts the calls of mm->get_unmapped_area() from indirect branches into a direct ones. The stress-ng bigheap benchmark calls realloc a lot, which calls through get_unmapped_area() in the kernel. On x86, the change yielded a ~1% improvement there on a retpoline config. In testing a few x86 configs, removing the pointer unfortunately didn't result in any actual size reductions in the compiled layout of mm_struct. But depending on compiler or arch alignment requirements, the change could shrink the size of mm_struct. Link: https://lkml.kernel.org/r/20240326021656.202649-3-rick.p.edgecombe@intel.com Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin (Intel) <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
32a50540c3 |
bcachefs updates for 6.9
- Subvolume children btree; this is needed for providing a userspace
interface for walking subvolumes, which will come later
- Lots of improvements to directory structure checking
- Improved journal pipelining, significantly improving performance on
high iodepth write workloads
- Discard path improvements: the discard path is more efficient, and no
longer flushes the journal unnecessarily
- Buffered write path can now avoid taking the inode lock
- new mm helper: memalloc_flags_{save|restore}
- mempool now does kvmalloc mempools
-----BEGIN PGP SIGNATURE-----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=6xnj
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs updates from Kent Overstreet:
- Subvolume children btree; this is needed for providing a userspace
interface for walking subvolumes, which will come later
- Lots of improvements to directory structure checking
- Improved journal pipelining, significantly improving performance on
high iodepth write workloads
- Discard path improvements: the discard path is more efficient, and no
longer flushes the journal unnecessarily
- Buffered write path can now avoid taking the inode lock
- new mm helper: memalloc_flags_{save|restore}
- mempool now does kvmalloc mempools
* tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits)
bcachefs: time_stats: shrink time_stat_buffer for better alignment
bcachefs: time_stats: split stats-with-quantiles into a separate structure
bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet
bcachefs: time_stats: add larger units
bcachefs: pull out time_stats.[ch]
bcachefs: reconstruct_alloc cleanup
bcachefs: fix bch_folio_sector padding
bcachefs: Fix btree key cache coherency during replay
bcachefs: Always flush write buffer in delete_dead_inodes()
bcachefs: Fix order of gc_done passes
bcachefs: fix deletion of indirect extents in btree_gc
bcachefs: Prefer struct_size over open coded arithmetic
bcachefs: Kill unused flags argument to btree_split()
bcachefs: Check for writing superblocks with nonsense member seq fields
bcachefs: fix bch2_journal_buf_to_text()
lib/generic-radix-tree.c: Make nodes more reasonably sized
bcachefs: copy_(to|from)_user_errcode()
bcachefs: Split out bkey_types.h
bcachefs: fix lost journal buf wakeup due to improved pipelining
bcachefs: intercept mountoption value for bool type
...
|
||
|
Kent Overstreet
|
eab0af905b |
mm: introduce PF_MEMALLOC_NORECLAIM, PF_MEMALLOC_NOWARN
Introduce PF_MEMALLOC_* equivalents of some GFP_ flags: PF_MEMALLOC_NORECLAIM -> GFP_NOWAIT PF_MEMALLOC_NOWARN -> __GFP_NOWARN Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: linux-mm@kvack.org Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Kent Overstreet
|
3f6d5e6a46 |
mm: introduce memalloc_flags_{save,restore}
Our proliferation of memalloc_*_{save,restore} APIs is getting a bit
silly, this adds a generic version and converts the existing
save/restore functions to wrappers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: linux-mm@kvack.org
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
||
|
Vlastimil Babka
|
cfb837e843 |
mm: document memalloc_noreclaim_save() and memalloc_pin_save()
The memalloc_noreclaim_save() function currently has no documentation comment, so the implications of its usage are not obvious. Namely that it not only prevents entering reclaim (as the name suggests), but also allows using all memory reserves and thus should be only used in contexts that are allocating memory to free memory. This may lead to new improper usages being added. Thus add a documenting comment, based on the description of __GFP_MEMALLOC. While at it, also document memalloc_pin_save() so that all the memalloc_ scopes are documented. For those already documented, add missing Return: descriptions, and mark Context: description per kernel-docs style guide. In the comments describing the relevant PF_MEMALLOC flags, refer to their scope setting functions. [vbabka@suse.cz: fix issues that Mike pointed out] Link: https://lkml.kernel.org/r/20240215095827.13756-2-vbabka@suse.cz Link: https://lkml.kernel.org/r/20240212182950.32730-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Roman Gushchin
|
e86828e544 |
mm: kmem: scoped objcg protection
Switch to a scope-based protection of the objcg pointer on slab/kmem allocation paths. Instead of using the get_() semantics in the pre-allocation hook and put the reference afterwards, let's rely on the fact that objcg is pinned by the scope. It's possible because: 1) if the objcg is received from the current task struct, the task is keeping a reference to the objcg. 2) if the objcg is received from an active memcg (remote charging), the memcg is pinned by the scope and has a reference to the corresponding objcg. Link: https://lkml.kernel.org/r/20231019225346.1822282-5-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
58390c8ce1 |
IOMMU Updates for Linux 6.4
Including:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmRONeAACgkQK/BELZcB
GuPmpw/8C9ruxQ0JU5rcDBXQGvos4gMmxlbELMrBpbbiTtdb35xchpKfdhnECGIF
k2SrrcF40R/S82SyzNU/eZtGKirtcXvGFraUFgu/QdCcnnqpRHs+IJMXX2NJP+it
+0wO1uiInt3CN1ERcR4F31cDKiWjDG8bvQVE5LIyiy4KrIU5ld2G91Fkaa0R13Au
6H+/wKkcUC6OyaGE6wPx474xBkapT20vj5AIQuAWisXJJR0wbBon1sUTo/IRKsU+
IkNxH0W+1PNImJ+crAdf/nkOlyqoChY4ww6cm07LrOsBLIsX5bCqXfL4HvKthElD
MEgk2SN5kfjfR5Vf29W4hZVM1CT8VbhO41I7OzaZ6X6RU2PXoldPKlgKtZGeSKn1
9bcMpSgB0BtbttvBevSkxTo5KHFozXS2DG3DFoMB3yFMme8Th0LrhBZ9oB7NIPNw
ntMo4K75vviC6Vvzjy4Anj/+y+Zm3W6wDDP7F12O6WZLkK5s4hrSsHUm/MQnnKQP
muJlG870RnSl73xUQZe3cuBxktXuJ3EHqqYIPE0npzvauu8hhWcis3opf2Y+U2s8
aBCCIgp5kTKqjHLh2e4lNCKZf1/b/dhxRcRBQhpAIb8YsjMlIJyM+G8Jz6K6gBga
5Ld+68UQ3oHJwoLV1HCFN8jbpQ9KZn1s9+h3yrYjRAcLNiFb3nU=
=OvTo
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
|
||
|
Linus Torvalds
|
586b222d74 |
Scheduler changes for v6.4:
- Allow unprivileged PSI poll()ing
- Fix performance regression introduced by mm_cid
- Improve livepatch stalls by adding livepatch task switching to cond_resched(),
this resolves livepatching busy-loop stalls with certain CPU-bound kthreads.
- Improve sched_move_task() performance on autogroup configs.
- On core-scheduling CPUs, avoid selecting throttled tasks to run
- Misc cleanups, fixes and improvements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmRK39cRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hXPhAAk2WqOV2cW4BjSCHjWWE05IfTb0HMn8si
mFGBAnr1GIkJRvICAusAwDU3FcmP5mWyXA+LK110d3x4fKJP15vCD5ru5lHnBfX7
fSD+Ml8uM4Xlp8iUoQspilbQwmWkQSwhudbDs3Nj7XGUzJCvNgm1sM3xPRDlqSJ5
6zumfVOPTfzSGcZY3a8sMuJnCepZHLRR6NkLzo/DuI1NMy2Jw1dK43dh77AO1mBF
M53PF2IQgm6Wu/67p2k5eDq4c0AKL4PyIb4dRTGOPyljWMf41n28jwMv1tjlvu+Y
uT0JD8MJSrFiylyT41x7Asr7orAGXj3cPhShK5R0vrutx/SbqBiaaE1MO9U3aC3B
7xVXEORHWD6KIDqTvzmWGrMBkIdyWB6CLk6EJKr3MqM9hUtP2ift7bkAgIad9h+4
G9DdVePGoCyh/TQtJ9EPIULAYeu9mmDZe8rTQ8C5MCSg//05/CTMgBbb0NiFWhnd
0JQl1B0nNUA87whVUxK8Hfu4DLh7m9jrzgQr9Ww8/FwQ6tQHBOKWgDdbv45ckkaG
cJIQt/+vLilddazc8u8E+BGaD5w2uIYF0uL7kvG6Q5oARX06AZ5dj1m06vhZe/Ym
laOVZEpJsbQnxviY6jwj1n+CSB9aK7feiQfDePBPbpJGGUHyZoKrnLN6wmW2se+H
VCHtdgsEl5I=
=Hgci
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Allow unprivileged PSI poll()ing
- Fix performance regression introduced by mm_cid
- Improve livepatch stalls by adding livepatch task switching to
cond_resched(). This resolves livepatching busy-loop stalls with
certain CPU-bound kthreads
- Improve sched_move_task() performance on autogroup configs
- On core-scheduling CPUs, avoid selecting throttled tasks to run
- Misc cleanups, fixes and improvements
* tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Fix local_clock() before sched_clock_init()
sched/rt: Fix bad task migration for rt tasks
sched: Fix performance regression introduced by mm_cid
sched/core: Make sched_dynamic_mutex static
sched/psi: Allow unprivileged polling of N*2s period
sched/psi: Extract update_triggers side effect
sched/psi: Rename existing poll members in preparation
sched/psi: Rearrange polling code in preparation
sched/fair: Fix inaccurate tally of ttwu_move_affine
vhost: Fix livepatch timeouts in vhost_worker()
livepatch,sched: Add livepatch task switching to cond_resched()
livepatch: Skip task_call_func() for current task
livepatch: Convert stack entries array to percpu
sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization
sched/core: Reduce cost of sched_move_task when config autogroup
sched/core: Avoid selecting the task that is throttled to run when core-sched enable
sched/topology: Make sched_energy_mutex,update static
|
||
|
Linus Torvalds
|
22b8cc3e78 |
Add support for new Linear Address Masking CPU feature. This is similar
to ARM's Top Byte Ignore and allows userspace to store metadata in some bits of pointers without masking it out before use. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmRK/WIACgkQaDWVMHDJ krAL+RAAw33EhsWyYVkeAtYmYBKkGvlgeSDULtfJKe5bynJBTHkGKfM6RE9MSJIt 5fHWaConGh8HNpy0Us1sDvd/aWcWRm5h7ZcCVD+R4qrgh/vc7ULzM+elXe5jzr4W cyuTckF2eW6SVrYg6fH5q+6Uy/moDtrdkLRvwRBf+AYeepB8gvSSH5XixKDNiVBE pjNy1xXVZQokqD4tjsFelmLttyacR5OabiE/aeVNoFYf9yTwfnN8N3T6kwuOoS4l Lp6NA+/0ux+oBlR+Is+JJG8Mxrjvz96yJGZYdR2YP5k3bMQtHAAjuq2w+GgqZm5i j3/E6KQepEGaCfC+bHl68xy/kKx8ik+jMCEcBalCC25J3uxbLz41g6K3aI890wJn +5ZtfcmoDUk9pnUyLxR8t+UjOSBFAcRSUE+FTjUH1qEGsMPK++9a4iLXz5vYVK1+ +YCt1u5LNJbkDxE8xVX3F5jkXh0G01SJsuUVAOqHSNfqSNmohFK8/omqhVRrRqoK A7cYLtnOGiUXLnvjrwSxPNOzRrG+GAwqaw8gwOTaYogETWbTY8qsSCEVl204uYwd m8io9rk2ZXUdDuha56xpBbPE0JHL9hJ2eKCuPkfvRgJT9YFyTh+e0UdX20k+nDjc ang1S350o/Y0sus6rij1qS8AuxJIjHucG0GdgpZk3KUbcxoRLhI= =qitk -----END PGP SIGNATURE----- Merge tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 LAM (Linear Address Masking) support from Dave Hansen: "Add support for the new Linear Address Masking CPU feature. This is similar to ARM's Top Byte Ignore and allows userspace to store metadata in some bits of pointers without masking it out before use" * tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/iommu/sva: Do not allow to set FORCE_TAGGED_SVA bit from outside x86/mm/iommu/sva: Fix error code for LAM enabling failure due to SVA selftests/x86/lam: Add test cases for LAM vs thread creation selftests/x86/lam: Add ARCH_FORCE_TAGGED_SVA test cases for linear-address masking selftests/x86/lam: Add inherit test cases for linear-address masking selftests/x86/lam: Add io_uring test cases for linear-address masking selftests/x86/lam: Add mmap and SYSCALL test cases for linear-address masking selftests/x86/lam: Add malloc and tag-bits test cases for linear-address masking x86/mm/iommu/sva: Make LAM and SVA mutually exclusive iommu/sva: Replace pasid_valid() helper with mm_valid_pasid() mm: Expose untagging mask in /proc/$PID/status x86/mm: Provide arch_prctl() interface for LAM x86/mm: Reduce untagged_addr() overhead for systems without LAM x86/uaccess: Provide untagged_addr() and remove tags before address check mm: Introduce untagged_addr_remote() x86/mm: Handle LAM on context switch x86: CPUID and CR3/CR4 flags for Linear Address Masking x86: Allow atomic MM_CONTEXT flags setting x86/mm: Rework address range check in get_user() and put_user() |
||
|
Mathieu Desnoyers
|
223baf9d17 |
sched: Fix performance regression introduced by mm_cid
Introduce per-mm/cpu current concurrency id (mm_cid) to fix a PostgreSQL
sysbench regression reported by Aaron Lu.
Keep track of the currently allocated mm_cid for each mm/cpu rather than
freeing them immediately on context switch. This eliminates most atomic
operations when context switching back and forth between threads
belonging to different memory spaces in multi-threaded scenarios (many
processes, each with many threads). The per-mm/per-cpu mm_cid values are
serialized by their respective runqueue locks.
Thread migration is handled by introducing invocation to
sched_mm_cid_migrate_to() (with destination runqueue lock held) in
activate_task() for migrating tasks. If the destination cpu's mm_cid is
unset, and if the source runqueue is not actively using its mm_cid, then
the source cpu's mm_cid is moved to the destination cpu on migration.
Introduce a task-work executed periodically, similarly to NUMA work,
which delays reclaim of cid values when they are unused for a period of
time.
Keep track of the allocation time for each per-cpu cid, and let the task
work clear them when they are observed to be older than
SCHED_MM_CID_PERIOD_NS and unused. This task work also clears all
mm_cids which are greater or equal to the Hamming weight of the mm
cidmask to keep concurrency ids compact.
Because we want to ensure the mm_cid converges towards the smaller
values as migrations happen, the prior optimization that was done when
context switching between threads belonging to the same mm is removed,
because it could delay the lazy release of the destination runqueue
mm_cid after it has been replaced by a migration. Removing this prior
optimization is not an issue performance-wise because the introduced
per-mm/per-cpu mm_cid tracking also covers this more specific case.
Fixes:
|
||
|
Jacob Pan
|
cd3891158a |
iommu/sva: Move PASID helpers to sva code
Preparing to remove IOASID infrastructure, PASID management will be under SVA code. Decouple mm code from IOASID. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20230322200803.869130-3-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Nicholas Piggin
|
88e3009b52 |
lazy tlb: allow lazy tlb mm refcounting to be configurable
Add CONFIG_MMU_TLB_REFCOUNT which enables refcounting of the lazy tlb mm when it is context switched. This can be disabled by architectures that don't require this refcounting if they clean up lazy tlb mms when the last refcount is dropped. Currently this is always enabled, so the patch introduces no functional change. Link: https://lkml.kernel.org/r/20230203071837.1136453-4-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Nicholas Piggin
|
aa464ba9a1 |
lazy tlb: introduce lazy tlb mm refcount helper functions
Add explicit _lazy_tlb annotated functions for lazy tlb mm refcounting. This makes the lazy tlb mm references more obvious, and allows the refcounting scheme to be modified in later changes. There is no functional change with this patch. Link: https://lkml.kernel.org/r/20230203071837.1136453-3-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kirill A. Shutemov
|
400b9b9344 |
iommu/sva: Replace pasid_valid() helper with mm_valid_pasid()
Kernel has few users of pasid_valid() and all but one checks if the process has PASID allocated. The helper takes ioasid_t as the input. Replace the helper with mm_valid_pasid() that takes mm_struct as the argument. The only call that checks PASID that is not tied to mm_struct is open-codded now. This is preparatory patch. It helps avoid ifdeffery: no need to dereference mm->pasid in generic code to check if the process has PASID. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/all/20230312112612.31869-11-kirill.shutemov%40linux.intel.com |
||
|
Mike Rapoport
|
ee65728e10 |
docs: rename Documentation/vm to Documentation/mm
so it will be consistent with code mm directory and with Documentation/admin-guide/mm and won't be confused with virtual machines. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Tested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Wu XiangCheng <bobwxc@email.cn> |
||
|
Christophe Leroy
|
2cb4de085f |
mm: Add len and flags parameters to arch_get_mmap_end()
Powerpc needs flags and len to make decision on arch_get_mmap_end(). So add them as parameters to arch_get_mmap_end(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b556daabe7d2bdb2361c4d6130280da7c1ba2c14.1649523076.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
4b439e25e2 |
mm, hugetlbfs: Allow an arch to always use generic versions of get_unmapped_area functions
Unlike most architectures, powerpc can only define at runtime if it is going to use the generic arch_get_unmapped_area() or not. Today, powerpc has a copy of the generic arch_get_unmapped_area() because when selection HAVE_ARCH_UNMAPPED_AREA the generic arch_get_unmapped_area() is not available. Rename it generic_get_unmapped_area() and make it independent of HAVE_ARCH_UNMAPPED_AREA. Do the same for arch_get_unmapped_area_topdown() versus HAVE_ARCH_UNMAPPED_AREA_TOPDOWN. Do the same for hugetlb_get_unmapped_area() versus HAVE_ARCH_HUGETLB_UNMAPPED_AREA. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/77f9d3e592f1c8511df9381aa1c4e754651da4d1.1649523076.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
5f24d5a579 |
mm, hugetlb: allow for "high" userspace addresses
This is a fix for commit |
||
|
Fenghua Yu
|
701fac4038 |
iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit
PASIDs are process-wide. It was attempted to use refcounted PASIDs to free them when the last thread drops the refcount. This turned out to be complex and error prone. Given the fact that the PASID space is 20 bits, which allows up to 1M processes to have a PASID associated concurrently, PASID resource exhaustion is not a realistic concern. Therefore, it was decided to simplify the approach and stick with lazy on demand PASID allocation, but drop the eager free approach and make an allocated PASID's lifetime bound to the lifetime of the process. Get rid of the refcounting mechanisms and replace/rename the interfaces to reflect this new approach. [ bp: Massage commit message. ] Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220207230254.3342514-6-fenghua.yu@intel.com |
||
|
Fenghua Yu
|
a6cbd44093 |
kernel/fork: Initialize mm's PASID
A new mm doesn't have a PASID yet when it's created. Initialize the mm's PASID on fork() or for init_mm to INVALID_IOASID (-1). INIT_PASID (0) is reserved for kernel legacy DMA PASID. It cannot be allocated to a user process. Initializing the process's PASID to 0 may cause confusion that's why the process uses the reserved kernel legacy DMA PASID. Initializing the PASID to INVALID_IOASID (-1) explicitly tells the process doesn't have a valid PASID yet. Even though the only user of mm_pasid_init() is in fork.c, define it in <linux/sched/mm.h> as the first of three mm/pasid life cycle functions (init/set/drop) to keep these all together. Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220207230254.3342514-5-fenghua.yu@intel.com |
||
|
NeilBrown
|
4034247a0d |
mm: introduce memalloc_retry_wait()
Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Thomas Gleixner
|
8d491de6ed |
sched: Move mmdrop to RCU on RT
mmdrop() is invoked from finish_task_switch() by the incoming task to drop the mm which was handed over by the previous task. mmdrop() can be quite expensive which prevents an incoming real-time task from getting useful work done. Provide mmdrop_sched() which maps to mmdrop() on !RT kernels. On RT kernels it delagates the eventually required invocation of __mmdrop() to RCU. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210928122411.648582026@linutronix.de |
||
|
Vasily Averin
|
55a68c8239 |
memcg: replace in_interrupt() by !in_task() in active_memcg()
set_active_memcg() uses in_interrupt() check to select proper storage for
cgroup: pointer on task struct or per-cpu pointer.
It isn't fully correct: obsoleted in_interrupt() includes tasks with
disabled BH. It's better to use '!in_task()' instead.
Link: https://lkml.org/lkml/2021/7/26/487
Link: https://lkml.kernel.org/r/ed4448b0-4970-616f-7368-ef9dd3cb628d@virtuozzo.com
Fixes:
|
||
|
Matthew Wilcox (Oracle)
|
4f3eaf452a |
mm: report a more useful address for reclaim acquisition
A recent lockdep report included these lines: [ 96.177910] 3 locks held by containerd/770: [ 96.177934] #0: ffff88810815ea28 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x115/0x770 [ 96.177999] #1: ffffffff82915020 (rcu_read_lock){....}-{1:2}, at: get_swap_device+0x33/0x140 [ 96.178057] #2: ffffffff82955ba0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 While it was not useful to that bug report to know where the reclaim lock had been acquired, it might be useful under other circumstances. Allow the caller of __fs_reclaim_acquire to specify the instruction pointer to use. Link: https://lkml.kernel.org/r/20210719185709.1755149-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Pavel Tatashin
|
8e3560d963 |
mm: honor PF_MEMALLOC_PIN for all movable pages
PF_MEMALLOC_PIN is only honored for CMA pages, extend this flag to work for any allocations from ZONE_MOVABLE by removing __GFP_MOVABLE from gfp_mask when this flag is passed in the current context. Add is_pinnable_page() to return true if page is in a pinnable page. A pinnable page is not in ZONE_MOVABLE and not of MIGRATE_CMA type. Link: https://lkml.kernel.org/r/20210215161349.246722-8-pasha.tatashin@soleen.com Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Pavel Tatashin
|
1a08ae36cf |
mm cma: rename PF_MEMALLOC_NOCMA to PF_MEMALLOC_PIN
PF_MEMALLOC_NOCMA is used ot guarantee that the allocator will not return pages that might belong to CMA region. This is currently used for long term gup to make sure that such pins are not going to be done on any CMA pages. When PF_MEMALLOC_NOCMA has been introduced we haven't realized that it is focusing on CMA pages too much and that there is larger class of pages that need the same treatment. MOVABLE zone cannot contain any long term pins as well so it makes sense to reuse and redefine this flag for that usecase as well. Rename the flag to PF_MEMALLOC_PIN which defines an allocation context which can only get pages suitable for long-term pins. Also rename: memalloc_nocma_save()/memalloc_nocma_restore to memalloc_pin_save()/memalloc_pin_restore() and make the new functions common. [rppt@linux.ibm.com: fix renaming of PF_MEMALLOC_NOCMA to PF_MEMALLOC_PIN] Link: https://lkml.kernel.org/r/20210331163816.11517-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20210215161349.246722-6-pasha.tatashin@soleen.com Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
149fc78735 |
include/linux/sched/mm.h: use rcu_dereference in in_vfork()
Fix a sparse warning by using rcu_dereference(). Technically this is a
bug and a sufficiently aggressive compiler could reload the `real_parent'
pointer outside the protection of the rcu lock (and access freed memory),
but I think it's pretty unlikely to happen.
Link: https://lkml.kernel.org/r/20210221194207.1351703-1-willy@infradead.org
Fixes:
|
||
|
Linus Torvalds
|
ac73e3dc8a |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
|
||
|
Daniel Vetter
|
95d6c701f4 |
mm: extract might_alloc() debug check
Extracted from slab.h, which seems to have the most complete version including the correct might_sleep() check. Roll it out to slob.c. Motivated by a discussion with Paul about possibly changing call_rcu behaviour to allocate memory, but only roughly every 500th call. There are a lot fewer places in the kernel that care about whether allocating memory is allowed or not (due to deadlocks with reclaim code) than places that care whether sleeping is allowed. But debugging these also tends to be a lot harder, so nice descriptive checks could come in handy. I might have some use eventually for annotations in drivers/gpu. Note that unlike fs_reclaim_acquire/release gfpflags_allow_blocking does not consult the PF_MEMALLOC flags. But there is no flag equivalent for GFP_NOWAIT, hence this check can't go wrong due to memalloc_no*_save/restore contexts. Willy is working on a patch series which might change this: https://lore.kernel.org/linux-mm/20200625113122.7540-7-willy@infradead.org/ I think best would be if that updates gfpflags_allow_blocking(), since there's a ton of callers all over the place for that already. Link: https://lkml.kernel.org/r/20201125162532.1299794-3-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Waiman Long <longman@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Qian Cai <cai@lca.pw> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Christian König <christian.koenig@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström (Intel) <thomas_os@shipmail.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mathieu Desnoyers
|
5bc7850232 |
sched: fix exit_mm vs membarrier (v4)
exit_mm should issue memory barriers after user-space memory accesses,
before clearing current->mm, to order user-space memory accesses
performed prior to exit_mm before clearing tsk->mm, which has the
effect of skipping the membarrier private expedited IPIs.
exit_mm should also update the runqueue's membarrier_state so
membarrier global expedited IPIs are not sent when they are not
needed.
The membarrier system call can be issued concurrently with do_exit
if we have thread groups created with CLONE_VM but not CLONE_THREAD.
Here is the scenario I have in mind:
Two thread groups are created, A and B. Thread group B is created by
issuing clone from group A with flag CLONE_VM set, but not CLONE_THREAD.
Let's assume we have a single thread within each thread group (Thread A
and Thread B).
The AFAIU we can have:
Userspace variables:
int x = 0, y = 0;
CPU 0 CPU 1
Thread A Thread B
(in thread group A) (in thread group B)
x = 1
barrier()
y = 1
exit()
exit_mm()
current->mm = NULL;
r1 = load y
membarrier()
skips CPU 0 (no IPI) because its current mm is NULL
r2 = load x
BUG_ON(r1 == 1 && r2 == 0)
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201020134715.13909-2-mathieu.desnoyers@efficios.com
|
||
|
Roman Gushchin
|
37d5985c00 |
mm: kmem: prepare remote memcg charging infra for interrupt contexts
Remote memcg charging API uses current->active_memcg to store the currently active memory cgroup, which overwrites the memory cgroup of the current process. It works well for normal contexts, but doesn't work for interrupt contexts: indeed, if an interrupt occurs during the execution of a section with an active memcg set, all allocations inside the interrupt will be charged to the active memcg set (given that we'll enable accounting for allocations from an interrupt context). But because the interrupt might have no relation to the active memcg set outside, it's obviously wrong from the accounting prospective. To resolve this problem, let's add a global percpu int_active_memcg variable, which will be used to store an active memory cgroup which will be used from interrupt contexts. set_active_memcg() will transparently use current->active_memcg or int_active_memcg depending on the context. To make the read part simple and transparent for the caller, let's introduce two new functions: - struct mem_cgroup *active_memcg(void), - struct mem_cgroup *get_active_memcg(void). They are returning the active memcg if it's set, hiding all implementation details: where to get it depending on the current context. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Link: http://lkml.kernel.org/r/20200827225843.1270629-4-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Roman Gushchin
|
b87d8cefe4 |
mm, memcg: rework remote charging API to support nesting
Currently the remote memcg charging API consists of two functions:
memalloc_use_memcg() and memalloc_unuse_memcg(), which set and clear the
memcg value, which overwrites the memcg of the current task.
memalloc_use_memcg(target_memcg);
<...>
memalloc_unuse_memcg();
It works perfectly for allocations performed from a normal context,
however an attempt to call it from an interrupt context or just nest two
remote charging blocks will lead to an incorrect accounting. On exit from
the inner block the active memcg will be cleared instead of being
restored.
memalloc_use_memcg(target_memcg);
memalloc_use_memcg(target_memcg_2);
<...>
memalloc_unuse_memcg();
Error: allocation here are charged to the memcg of the current
process instead of target_memcg.
memalloc_unuse_memcg();
This patch extends the remote charging API by switching to a single
function: struct mem_cgroup *set_active_memcg(struct mem_cgroup *memcg),
which sets the new value and returns the old one. So a remote charging
block will look like:
old_memcg = set_active_memcg(target_memcg);
<...>
set_active_memcg(old_memcg);
This patch is heavily based on the patch by Johannes Weiner, which can be
found here: https://lkml.org/lkml/2020/5/28/806 .
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Schatzberg <dschatzberg@fb.com>
Link: https://lkml.kernel.org/r/20200821212056.3769116-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Jann Horn
|
4d45e75a99 |
mm: remove the now-unnecessary mmget_still_valid() hack
The preceding patches have ensured that core dumping properly takes the mmap_lock. Thanks to that, we can now remove mmget_still_valid() and all its users. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200827114932.3572699-8-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Peter Oskolkov
|
2a36ab717e |
rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ
This patchset is based on Google-internal RSEQ work done by Paul Turner and Andrew Hunter. When working with per-CPU RSEQ-based memory allocations, it is sometimes important to make sure that a global memory location is no longer accessed from RSEQ critical sections. For example, there can be two per-CPU lists, one is "active" and accessed per-CPU, while another one is inactive and worked on asynchronously "off CPU" (e.g. garbage collection is performed). Then at some point the two lists are swapped, and a fast RCU-like mechanism is required to make sure that the previously active list is no longer accessed. This patch introduces such a mechanism: in short, membarrier() syscall issues an IPI to a CPU, restarting a potentially active RSEQ critical section on the CPU. Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lkml.kernel.org/r/20200923233618.2572849-1-posk@google.com |
||
|
Waiman Long
|
af161bee93 |
include/linux/sched/mm.h: optimize current_gfp_context()
The current_gfp_context() converts a number of PF_MEMALLOC_* per-process flags into the corresponding GFP_* flags for memory allocation. In that function, current->flags is accessed 3 times. That may lead to duplicated access of the same memory location. This is not usually a problem with minimal debug config options on as the compiler can optimize away the duplicated memory accesses. With most of the debug config options on, however, that may not be the case. For example, the x86-64 object size of the __need_fs_reclaim() in a debug kernel that calls current_gfp_context() was 309 bytes. With this patch applied, the object size is reduced to 202 bytes. This is a saving of 107 bytes and will probably be slightly faster too. Use READ_ONCE() to access current->flags to prevent the compiler from possibly accessing current->flags multiple times. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Michel Lespinasse <walken@google.com> Link: http://lkml.kernel.org/r/20200618212936.9776-1-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Joonsoo Kim
|
8510e69c8e |
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
Currently, memalloc_nocma_{save/restore} API that prevents CMA area
in page allocation is implemented by using current_gfp_context(). However,
there are two problems of this implementation.
First, this doesn't work for allocation fastpath. In the fastpath,
original gfp_mask is used since current_gfp_context() is introduced in
order to control reclaim and it is on slowpath. So, CMA area can be
allocated through the allocation fastpath even if
memalloc_nocma_{save/restore} APIs are used. Currently, there is just
one user for these APIs and it has a fallback method to prevent actual
problem.
Second, clearing __GFP_MOVABLE in current_gfp_context() has a side effect
to exclude the memory on the ZONE_MOVABLE for allocation target.
To fix these problems, this patch changes the implementation to exclude
CMA area in page allocation. Main point of this change is using the
alloc_flags. alloc_flags is mainly used to control allocation so it fits
for excluding CMA area in allocation.
Fixes:
|
||
|
Randy Dunlap
|
e0078e2eb8 |
linux/sched/mm.h: drop duplicated words in comments
Drop doubled words "to" and "that". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/927ea8d8-3f6c-9b65-4c2b-63ab4bd59ef1@infradead.org |
||
|
Sebastian Andrzej Siewior
|
01e377c539 |
sched/core: Remove mmdrop() definition
Commit
|
||
|
Michel Lespinasse
|
c1e8d7c6a7 |
mmap locking API: convert mmap_sem comments
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Peter Zijlstra
|
bf2c59fce4 |
sched/core: Fix illegal RCU from offline CPUs
In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw |
||
|
Thomas Gleixner
|
4610ba7ad8 |
exit/exec: Seperate mm_release()
mm_release() contains the futex exit handling. mm_release() is called from do_exit()->exit_mm() and from exec()->exec_mm(). In the exit_mm() case PF_EXITING and the futex state is updated. In the exec_mm() case these states are not touched. As the futex exit code needs further protections against exit races, this needs to be split into two functions. Preparatory only, no functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20191106224556.240518241@linutronix.de |
||
|
Mathieu Desnoyers
|
227a4aadc7 |
sched/membarrier: Fix p->mm->membarrier_state racy load
The membarrier_state field is located within the mm_struct, which is not guaranteed to exist when used from runqueue-lock-free iteration on runqueues by the membarrier system call. Copy the membarrier_state from the mm_struct into the scheduler runqueue when the scheduler switches between mm. When registering membarrier for mm, after setting the registration bit in the mm membarrier state, issue a synchronize_rcu() to ensure the scheduler observes the change. In order to take care of the case where a runqueue keeps executing the target mm without swapping to other mm, iterate over each runqueue and issue an IPI to copy the membarrier_state from the mm_struct into each runqueue which have the same mm which state has just been modified. Move the mm membarrier_state field closer to pgd in mm_struct to use a cache line already touched by the scheduler switch_mm. The membarrier_execve() (now membarrier_exec_mmap) hook now needs to clear the runqueue's membarrier state in addition to clear the mm membarrier state, so move its implementation into the scheduler membarrier code so it can access the runqueue structure. Add memory barrier in membarrier_exec_mmap() prior to clearing the membarrier state, ensuring memory accesses executed prior to exec are not reordered with the stores clearing the membarrier state. As suggested by Linus, move all membarrier.c RCU read-side locks outside of the for each cpu loops. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Mike Galbraith <efault@gmx.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-5-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Mathieu Desnoyers
|
2840cf02fa |
sched/membarrier: Call sync_core only before usermode for same mm
When the prev and next task's mm change, switch_mm() provides the core serializing guarantees before returning to usermode. The only case where an explicit core serialization is needed is when the scheduler keeps the same mm for prev and next. Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190919173705.2181-4-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andrea Arcangeli
|
59ea6d06cf |
coredump: fix race condition between collapse_huge_page() and core dumping
When fixing the race conditions between the coredump and the mmap_sem holders outside the context of the process, we focused on mmget_not_zero()/get_task_mm() callers in |