Add a new module for common handling of Admin Queue related logic.
Start by a helper for error to string conversion. This lives inside
libie/, but is a separate module what follows our logic of splitting
into topical modules, to avoid pulling in not needed stuff, and have
better organization in general.
Olek suggested how to better solve the error to string conversion.
It will be used in follow-up patches in ice, i40e and iavf.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use libie_aq_desc instead of i40e_aq_desc. Do needed changes to allow
clean build.
Get version descriptor is a little less detailed on i40e. To not mess up
with shifting or union inside libie desc use get version descriptor from
i40e.
Move additional caps for i40e to libie.
Fix RCT in declaration that is using libie_aq_desc;
Use libie_aq_raw() wherever it can be used.
The libie aq error is extended, cover it in ice driver just to clean
build. In next patches the libie code for that will be used in each
of intel driver.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use libie_aq_desc instead of ixgbe_aci_desc. Do needed changes to allow
clean build.
Move additional caps used in ixgbe to libie.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The descriptor structure is the same in ice, ixgbe and i40e. Move it to
common libie header to use it across different driver.
Leave device specific adminq commands in separate folders. This lead to
a change that need to be done in filling/getting descriptor:
- previous: struct specific_desc *cmd;
cmd = &desc.params.specific_desc;
- now: struct specific_desc *cmd;
cmd = libie_aq_raw(&desc);
Do this changes across the driver to allow clean build. The casting only
have to be done in case of specific descriptors, for generic one union
can still be used.
Changes beside code moving:
- change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too)
- remove shift variables not otherwise needed (in libie_aq_flags)
- fill/get descriptor data based on desc.params.raw whenever the
descriptor isn't defined in libie
- move defines from the libie_aq_sth structure outside
- add libie_aq_raw helper and use it instead of explicit casting
Reviewed by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Add RDMA support for Intel IPU E2000 in idpf
Tatyana Nikolova says:
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
IWL reviews:
v3: https://lore.kernel.org/all/20250708210554.1662-1-tatyana.e.nikolova@intel.com/
v2: https://lore.kernel.org/all/20250612220002.1120-1-tatyana.e.nikolova@intel.com/
v1 (split from previous series):
https://lore.kernel.org/all/20250523170435.668-1-tatyana.e.nikolova@intel.com/
v3: https://lore.kernel.org/all/20250207194931.1569-1-tatyana.e.nikolova@intel.com/
RFC v2: https://lore.kernel.org/all/20240824031924.421-1-tatyana.e.nikolova@intel.com/
RFC: https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
idpf: implement get LAN MMIO memory regions
idpf: implement IDC vport aux driver MTU change handler
idpf: implement remaining IDC RDMA core callbacks and handlers
idpf: implement RDMA vport auxiliary dev create, init, and destroy
idpf: implement core RDMA auxiliary dev create, init, and destroy
idpf: use reserved RDMA vectors from control plane
====================
Link: https://patch.msgid.link/20250714181002.2865694-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RDMA driver needs to map its own MMIO regions for the sake of
performance, meaning the IDPF needs to avoid mapping portions of the BAR
space. However, to be HW agnostic, the IDPF cannot assume where
these are and must avoid mapping hard coded regions as much as possible.
The IDPF maps the bare minimum to load and communicate with the
control plane, i.e., the mailbox registers and the reset state
registers. Because of how and when mailbox register offsets are
initialized, it is easier to adjust the existing defines to be relative
to the mailbox region starting address. Use a specific mailbox register
write function that uses these relative offsets. The reset state
register addresses are calculated the same way as for other registers,
described below.
The IDPF then calls a new virtchnl op to fetch a list of MMIO regions
that it should map. The addresses for the registers in these regions are
calculated by determining what region the register resides in, adjusting
the offset to be relative to that region, and then adding the
register's offset to that region's mapped address.
If the new virtchnl op is not supported, the IDPF will fallback to
mapping the whole bar. However, it will still map them as separate
regions outside the mailbox and reset state registers. This way we can
use the same logic in both cases to access the MMIO space.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement the functions to create, initialize, and destroy an RDMA vport
auxiliary device. The vport aux dev creation is dependent on the
core aux device to call idpf_idc_vport_dev_ctrl to signal that it is
ready for vport aux devices. Implement that core callback to either
create and initialize the vport aux dev or deinitialize.
RDMA vport aux dev creation is also dependent on the control plane to
tell us the vport is RDMA enabled. Add a flag in the create vport
message to signal individual vport RDMA capabilities.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the initial idpf_idc.c file with the functions to kick off the IDC
initialization, create and initialize a core RDMA auxiliary device, and
destroy said device.
The RDMA core has a dependency on the vports being created by the
control plane before it can be initialized. Therefore, once all the
vports are up after a hard reset (either during driver load a function
level reset), the core RDMA device info will be created. It is populated
with the function type (as distinguished by the IDC initialization
function pointer), the core idc_ops function points (just stubs for
now), the reserved RDMA MSIX table, and various other info the core RDMA
auxiliary driver will need. It is then plugged on to the bus.
During a function level reset or driver unload, the device will be
unplugged from the bus and destroyed.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The Intel i40e, iavf, and ice drivers all include a definition of the
packet classifier filter types used to program RSS hash enable bits. For
i40e, these bits are used for both the PF and VF to configure the PFQF_HENA
and VFQF_HENA registers.
For ice and iAVF, these bits are used to communicate the desired hash
enable filter over virtchnl via its struct virtchnl_rss_hashena. The
virtchnl.h header makes no mention of where the bit definitions reside.
Maintaining a separate copy of these bits across three drivers is
cumbersome. Move the definition to libie as a new pctype.h header file.
Each driver can include this, and drop its own definition.
The ice implementation also defined a ICE_AVF_FLOW_FIELD_INVALID, intending
to use this to indicate when there were no hash enable bits set. This is
confusing, since the enumeration is using bit positions. A value of 0
*should* indicate the first bit. Instead, rewrite the code that uses
ICE_AVF_FLOW_FIELD_INVALID to just check if the avf_hash is zero. From
context this should be clear that we're checking if none of the bits are
set.
The values are kept as bit positions instead of encoding the BIT_ULL
directly into their value. While most users will simply use BIT_ULL
immediately, i40e uses the macros both with BIT_ULL and test_bit/set_bit
calls.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation of supporting more than a single core PCI driver
for RDMA, move ice specific structs like qset_params, qos_info
and qos_params from iidc_rdma.h to iidc_rdma_ice.h.
Previously, the ice driver was just exporting its entire PF struct
to the auxiliary driver, but since each core driver will have its own
different PF struct, implement a universal struct that all core drivers
can provide to the auxiliary driver through the probe call.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Co-developed-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Co-developed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Replace ice driver specific DSCP mapping number defines
ICE_DSCP_NUM_VAL and IIDC_MAX_DSCP_MAPPING with
an equivalent kernel define DSCP_MAX.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation of supporting more than a single core PCI driver
for RDMA, break the iidc_rdma.h header file into two more focused
headers.
Only the elements universal to all Intel drivers will remain in
the generic iidc_rdma.h header. Move the ice specific information
to an ice specific header file named iidc_rdma_ice.h.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation of supporting more than a single core PCI driver
for RDMA, homogenize naming to iidc_rdma_* and IIDC_RDMA_*
form.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
To prepare for the IDC upgrade to support different CORE
PCI drivers, rename header file from iidc.h to iidc_rdma.h
since this files functionality is specifically for RDMA support.
Use net/dscp.h include in irdma osdep.h and DSCP_MAX type.h,
instead of iidc header and define.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move responsibility of MSI-X requesting for RDMA feature from ice driver
to irdma driver. It is done to allow simple fallback when there is not
enough MSI-X available.
Change amount of MSI-X used for control from 4 to 1, as it isn't needed
to have more than one MSI-X for this purpose.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that the IAVF driver simply uses dev_alloc_page() + free_page() with
no custom recycling logics, it can easily be switched to using Page
Pool / libeth API instead.
This allows to removing the whole dancing around headroom, HW buffer
size, and page order. All DMA-for-device is now done in the PP core,
for-CPU -- in the libeth helper.
Use skb_mark_for_recycle() to bring back the recycling and restore the
performance. Speaking of performance: on par with the baseline and
faster with the PP optimization series applied. But the memory usage for
1500b MTU is now almost 2x lower (x86_64) thanks to allocating a page
every second descriptor.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules.
Before introducing new changes, which would need to be copied over again,
start decoupling the already existing duplicate functionality into a new
module, which will be shared between several Intel Ethernet drivers.
Add the lookup table which converts 8/10-bit hardware packet type into
a parsed bitfield structure for easy checking packet format parameters,
such as payload level, IP version, etc. This is currently used by i40e,
ice and iavf and it's all the same in all three drivers.
The only difference introduced in this implementation is that instead of
defining a 256 (or 1024 in case of ice) element array, add unlikely()
condition to limit the input to 154 (current maximum non-reserved packet
type). There's no reason to waste 600 (or even 3600) bytes only to not
hurt very unlikely exception packets.
The hash computation function now takes payload level directly as a
pkt_hash_type. There's a couple cases when non-IP ptypes are marked as
L3 payload and in the previous versions their hash level would be 2, not
3. But skb_set_hash() only sees difference between L4 and non-L4, thus
this won't change anything at all.
The module is behind the hidden Kconfig symbol, which the drivers will
select when needed. The exports are behind 'LIBIE' namespace to limit
the scope of the functions.
Not that non-HW-specific symbols will live in yet another module,
libeth. This is done to easily distinguish pretty generic code ready
for reusing by any other vendor and/or for moving the layer up from
the code useful in Intel's 1-100G drivers only.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct i40e_qvlist_info.
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Gurucharan G <gurucharanx.g@intel.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231003231838.work.510-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The ice driver provides QoS information to auxiliary drivers
through the exported function ice_get_qos_params. This function
doesn't currently support L3 DSCP QoS.
Add the necessary defines, structure elements and code to support
DSCP QoS through the IIDC functions.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It's not used.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Allow support for 'enable_iwarp' and 'enable_roce' devlink params to turn
on/off iWARP or RoCE protocol support for E800 devices.
For example, a user can turn on iWARP functionality with,
devlink dev param set pci/0000:07:00.0 name enable_iwarp value true cmode runtime
This add an iWARP auxiliary rdma device, ice.iwarp.<>, under this PF.
A user request to enable both iWARP and RoCE under the same PF is rejected
since this device does not support both protocols simultaneously on the
same port.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add Kconfig and Makefile to build irdma driver.
Remove i40iw driver and add an alias in irdma.
Remove legacy exported symbols i40e_register_client
and i40e_unregister_client from i40e as they are no
longer used.
irdma is the replacement driver that supports X722.
Link: https://lore.kernel.org/r/20210602205138.889-16-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the definitions to the i40e client header file in
preparation to convert i40e to use the new auxiliary bus
infrastructure. This header is shared between the 'i40e'
Intel networking driver providing RDMA support and the
'irdma' driver.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce a shared header file used by the 'ice' Intel networking driver
providing RDMA support and the 'irdma' driver to provide a private
interface.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in struct
i40e_qvlist_info instead of one-element array, and use the struct_size()
helper.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove all the unused defines as they are just dead weight.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Move i40e_client.h to include/linux/net/intel/*
since its shared between i40iw and i40e.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
