The kerneldoc for hid_report_len() needs to be improved. The
description of the @report argument is ungrammatical, and the
documentation does not explain under what circumstances the report
length will include the byte reserved for the report ID.
Let's fix up the kerneldoc.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/1c8416cb-7347-4a06-b00a-20518069d263@rowland.harvard.edu
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Syzkaller can create many uhid devices that trigger
repeated warnings like:
"hid-generic xxxx: unknown main item tag 0x0"
These messages can flood the system log, especially if a crash occurs
(e.g., with a slow UART console, leading to soft lockups). To mitigate
this, convert `hid_warn()` to use `dev_warn_ratelimited()`.
This helps reduce log noise and improves system stability under fuzzing
or faulty device scenarios.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Adds a new function to the hid_driver struct that is called when the
userspace starts using the device, and another one that is called when
userspace stop using the device. With this a hid driver can implement
special suspend handling for devices currently not in use.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20250211133950.422232-1-wse@tuxedocomputers.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Some USB HID mice have drivers both in HID as well as a separate USB
driver. The already existing hid_mouse_ignore_list in hid-quirks manages
this, but is not yet configurable by usbhid.quirks, unlike all others like
hid_ignore_list. Thus in some HID devices, where the vendor provides USB
drivers only for the mouse and lets keyboard handled by the generic hid
drivers, presence of such a quirk prevents the user from compiling hid core
again to add the device to the table.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Update struct hid_descriptor to better reflect the mandatory and
optional parts of the HID Descriptor as per USB HID 1.11 specification.
Note: the kernel currently does not parse any optional HID class
descriptors, only the mandatory report descriptor.
Update all references to member element desc[0] to rpt_desc.
Add test to verify bLength and bNumDescriptors values are valid.
Replace the for loop with direct access to the mandatory HID class
descriptor member for the report descriptor. This eliminates the
possibility of getting an out-of-bounds fault.
Add a warning message if the HID descriptor contains any unsupported
optional HID class descriptors.
Reported-by: syzbot+c52569baf0c843f35495@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c52569baf0c843f35495
Fixes: f043bfc98c ("HID: usbhid: fix out-of-bounds bug")
Cc: stable@vger.kernel.org
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
From: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
This patch series is focused on improving the compatibility and usability of the
hid-pidff force feedback driver. Last patch introduces a new, universal driver
for PID devices that need some special handling like report fixups, remapping the
button range, managing new pidff quirks and setting desirable fuzz/flat values.
This work has been done in the span of the past months with the help of the great
Linux simracing community, with a little input from sim flight fans from FFBeast.
No changes interfere with compliant and currently working PID devices.
"Generic" codepath was tested as well with Moza and Simxperience AccuForce v2.
I'm not married to the name. It's what we used previously, but if "universal" is
confusing (pidff is already the generic driver), we can come up with something
better like "hid-quirky-pidff" :)
With v8 and tiny finx in v9, all the outstanding issues were resolved,
additional pidff issues were fixed and hid-pidff defines moved to a dedicated
header file. This patch series could be considered done bar any comments and
requests from input maintainers.
I could save more then a dozen lines of code by changing simple if statements
to only occupy on line instead of two in there's a need for that.
For main items, separate warning of reserved item tag from
warning of unknown item tag.
This comes from 6.2.2.4 Main Items of Device Class Definition
for HID 1.11 specification.
Signed-off-by: Tatsuya S <tatsuya.s2862@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Do not clutter hid includes with stuff not needed outside of
the kernel.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some devices only support SINE periodic effect although they advertise
support for all PERIODIC effect in their HID descriptor. Some just do
nothing when trying to play such an effect (upload goes fine), some express
undefined behavior like turning to one side.
This quirk forces all the periodic effects to be uploaded as SINE. This is
acceptable as all these effects are similar in nature and are mostly used as
rumble. SINE is the most popular with others seldom used (especially SAW_UP
and SAW_DOWN).
Fixes periodic effects for PXN and LITE STAR wheels
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Most steering wheels simply ignore DIRECTION field, but some try to be
compliant with the PID standard and use it in force calculations. Games
often ignore setting this field properly and/or there can be issues with
dinput8 -> wine -> SDL -> Linux API translation, and this value can be
incorrect. This can lead to partial/complete loss of Force Feedback or
even unexpected force reversal.
Sadly, this quirk can't be detected automatically without sending out
effects that would move an axis.
This fixes FFB on Moza Racing devices and others where effect direction
is not simply ignored.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This lays out a way to provide an initial set of quirks to enable before
device initialization takes place. GPL symbol export needed for the
possibility of building HID drivers which use this function as modules.
Adding a wrapper function to ensure compatibility with the old behavior
of hid_pidff_init.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
With this quirk, a PID device isn't required to have a strict
logical_minimum of 1 for the the PID_DEVICE_CONTROL usage page.
Some devices come with weird values in their device descriptors and
this quirk enables their initialization even if the logical minimum
of the DEVICE_CONTROL page is not 1.
Fixes initialization of VRS Direct Force Pro
Changes in v6:
- Change quirk name to better reflect it's intention
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some devices with only one axis are missing PARAMETER_BLOCK_OFFSET field
for conditional effects. They can only have one axis, so we're limiting
the max_axis when setting the report for those effects.
Automatic detection ensures compatibility even if such device won't be
explicitly defined in the kernel.
Fixes initialization of VRS DirectForce PRO and possibly other devices.
Changes in v6:
- Fixed NULL pointer dereference. When PBO is missing, make sure not
to set it anyway
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
A lot of devices do not include this field, and it's seldom used in force
feedback implementations. I tested about three dozen applications and
none of them make use of the delay.
This fixes initialization of a lot of PID wheels like Cammus, VRS, FFBeast
This change has no effect on fully compliant devices
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The addition of the "System Do Not Disturb" event code caused the Generic
Desktop D-Pad configuration to be skipped. This commit allows both to be
configured without conflicting with each other.
Fixes: 22d6d060ac ("input: Add support for "Do Not Disturb"")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
We already have the possibility to force not binding to hid-generic and
rely on a dedicated driver, but we couldn't do the other way around.
This is useful for BPF programs where we are fixing the report descriptor
and the events, but want to avoid a specialized driver to come after BPF
which would unwind everything that is done there.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20241001-hid-bpf-hid-generic-v3-8-2ef1019468df@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Currently, hid_bpf_rdesc_fixup() is called once the match between the
HID device and the driver is done. This can be problematic in case
the driver selected by the kernel would change the report descriptor
after the fact.
To give a chance for hid_bpf_rdesc_fixup() to provide hints on to how
to select a dedicated driver or not, move the call to that BPF hook
earlier in the .probe() process, when we get the first match.
However, this means that we might get called more than once (typically
once for hid-generic, and once for hid-vendor-specific). So we store the
result of HID-BPF fixup in struct hid_device. Basically, this means that
->bpf_rdesc can replace ->dev_rdesc when it was used in the code.
In order to not grow struct hid_device, some fields are re-ordered. This
was the output of pahole for the first 128 bytes:
struct hid_device {
__u8 * dev_rdesc; /* 0 8 */
unsigned int dev_rsize; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u8 * rdesc; /* 16 8 */
unsigned int rsize; /* 24 4 */
/* XXX 4 bytes hole, try to pack */
struct hid_collection * collection; /* 32 8 */
unsigned int collection_size; /* 40 4 */
unsigned int maxcollection; /* 44 4 */
unsigned int maxapplication; /* 48 4 */
__u16 bus; /* 52 2 */
__u16 group; /* 54 2 */
__u32 vendor; /* 56 4 */
__u32 product; /* 60 4 */
/* --- cacheline 1 boundary (64 bytes) --- */
__u32 version; /* 64 4 */
enum hid_type type; /* 68 4 */
unsigned int country; /* 72 4 */
/* XXX 4 bytes hole, try to pack */
struct hid_report_enum report_enum[3]; /* 80 6216 */
Basically, we got three holes of 4 bytes. We can reorder things a little
and makes those 3 holes a continuous 12 bytes hole, which can be replaced
by the new pointer and the new unsigned int we need.
In terms of code allocation, when not using HID-BPF, we are back to kernel
v6.2 in hid_open_report(). These multiple kmemdup() calls will be fixed
in a later commit.
Link: https://patch.msgid.link/20241001-hid-bpf-hid-generic-v3-1-2ef1019468df@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The only user of hid_snto32() is Logitech HID++ driver, which always
calls hid_snto32() with valid size (constant, either 12 or 8) and
therefore can simply use sign_extend32().
Make the switch and remove hid_snto32(). Move snto32() and s32ton() to
avoid introducing forward declaration.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20241003144656.3786064-2-dmitry.torokhov@gmail.com
[bentiss: fix checkpatch warning]
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
By allowing the drivers to return a "const *" they can constify their
static report arrays.
This makes it clear to driver authors that the HID core will not modify
those reports and they can be reused for multiple devices.
Furthermore security is slightly improved as those reports are protected
against accidental or malicious modifications.
[bentiss: fixup hid-cougar.c and hid-multitouch.c for latest version of
the master branch]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-6-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Once a report descriptor has been created by the HID core it is not
supposed to be modified anymore.
Enforce this invariant through the type system.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-5-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
fetch_item() does not modify the descriptor it operates on.
As a prerequisite for the constification of hid_driver::dev_rdesc,
mark the parameters and return value of fetch_item() as const.
Also adapt the variable types in the callers to match this
constification.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-4-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Once a report descriptor has been created by the HID core it is not
supposed to be modified anymore.
Enforce this invariant through the type system.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-3-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This helper will allow HID drivers to easily determine if they should
bind to a hid_device by checking for the prescence of a certain field
when its ID is not enough, which can be the case on USB devices with
multiple interfaces and/or configurations.
Convert google-hammer driver to use it, and remove now superfluous
hammer_has_usage().
[jkosina@suse.com: expand changelog with the information about
google-hammer being added as user of this API ]
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Same story than hid_hw_raw_requests:
This allows to intercept and prevent or change the behavior of
hid_hw_output_report() from a bpf program.
The intent is to solve a couple of use case:
- firewalling a HID device: a firewall can monitor who opens the hidraw
nodes and then prevent or allow access to write operations on that
hidraw node.
- change the behavior of a device and emulate a new HID feature request
The hook is allowed to be run as sleepable so it can itself call
hid_hw_output_report(), which allows to "convert" one feature request into
another or even call the feature request on a different HID device on the
same physical device.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-7-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
When we attach a sleepable hook to hid_hw_raw_requests, we can (and in
many cases should) call ourself hid_bpf_raw_request(), to actually fetch
data from the device itself.
However, this means that we might enter an infinite loop between
hid_hw_raw_requests hooks and hid_bpf_hw_request() call.
To prevent that, if a hid_bpf_hw_request() call is emitted, we prevent
any new call of this kfunc by storing the information in the context.
This way we can always trace/monitor/filter the incoming bpf requests,
while preventing those loops to happen.
I don't think exposing "from_bpf" is very interesting because while
writing such a bpf program, you need to match at least the report number
and/or the source of the call. So a blind "if there is a
hid_hw_raw_request() call, I'm emitting another one" makes no real
sense.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-5-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This allows to know who actually sent what when we process the request
to the device.
This will be useful for a BPF firewall program to allow or not requests
coming from a dedicated hidraw node client.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-2-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
And not by CONFIG_BPF. BPF can be selected while HID_BPF does not have
to. It actually cannot be on some platforms due to Kconfig dependences.
This saves quite some bytes on those setups.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Now that the driver core can properly handle constant struct bus_type,
move the hid_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Allow HID drivers to pass ->suspend, ->resume and ->reset_resume via
pm_ptr().
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
The only overhead in the final kernel image and at runtime are a few
extra bytes in 'struct hid_driver'.
The same approach is chosen by 'struct usb_driver' and other subsystems.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-1-0a71531ca93b@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct hid_input'
from 72 to 64 bytes.
It saves a few bytes of memory and is more cache-line friendly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some digitizers (notably XP-Pen Artist 24) do not report the Invert
usage when erasing. This causes the device to be permanently stuck with
the BTN_TOOL_RUBBER tool after sending Eraser, as Invert is the only
usage that can release the tool. In this state, Touch and Inrange are
no longer reported to userspace, rendering the pen unusable.
Prior to commit 87562fcd13 ("HID: input: remove the need for
HID_QUIRK_INVERT"), BTN_TOOL_RUBBER was never set and Eraser events were
simply translated into BTN_TOUCH without causing an inconsistent state.
Introduce HID_QUIRK_NOINVERT for such digitizers and detect them during
hidinput_configure_usage(). This quirk causes the tool to be released
as soon as Eraser is reported as not set. Set BTN_TOOL_RUBBER in
input->keybit when mapping Eraser.
Fixes: 87562fcd13 ("HID: input: remove the need for HID_QUIRK_INVERT")
Co-developed-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Illia Ostapyshyn <ostapyshyn@sra.uni-hannover.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add an introduction about HID meant for the casual programmer
that is trying either to fix his device or to understand
what is going wrong.
Signed-off-by: Marco Morandini <marco.morandini@polimi.it>
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
More and more drivers rely on devres to manage their resources, however
if bus' probe() and release() methods are not trivial and control some
of resources as well (for example enable or disable clocks, or attach
device to a power domain), we need to make sure that driver-allocated
resources are released immediately after driver's remove() method
returns, and not postponed until driver core gets around to releasing
resources.
In case of HID we should not try to close the report and release
associated memory until after all devres callbacks are executed. To fix
that we open a new devres group before calling driver's probe() and
explicitly release it when we return from driver's remove().
This is similar to what we did for I2C bus in commit 5b5475826c ("i2c:
ensure timely release of driver-allocated resources"). It is tempting to
try and move this into driver core, but actually doing so is challenging,
we need to split bus' remove() method into pre- and post-remove methods,
which would make the logic even less clear.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230505232417.1377393-1-swboyd@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
"Digitizer" is a generic usage that may be used by various devices but
which is particularly used by non-display pen tablets. This patch adds the
usage to the list of values matched by the IS_INPUT_APPLICATION() macro
that determines if an input device should be allocated or not.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://lore.kernel.org/r/20221019151832.44522-1-jason.gerecke@wacom.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Our HID device need KEY_CAMERA_FOCUS event to control camera,
but this event is non-existent in current HID driver.
So we add this event in hid-input.c.
Signed-off-by: fengqi <fengqi@xiaomi.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Presently, when a report is processed, its proposed size, provided by
the user of the API (as Report Size * Report Count) is compared against
the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some
low-level HID drivers allocate a reduced amount of memory to their
buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending
this check inadequate in some cases.
In these circumstances, if the received report ends up being smaller
than the proposed report size, the remainder of the buffer is zeroed.
That is, the space between sizeof(csize) (size of the current report)
and the rsize (size proposed i.e. Report Size * Report Count), which can
be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset()
shoots straight past the end of the buffer boundary and starts zeroing
out in-use values, often resulting in calamity.
This patch introduces a new variable into 'struct hid_ll_driver' where
individual low-level drivers can over-ride the default maximum value of
HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the
interface.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Initial support of HID-BPF (Benjamin Tissoires)
The history is a little long for this series, as it was intended to be
sent for v6.2. However some last minute issues forced us to postpone it
to v6.3.
Conflicts:
* drivers/hid/i2c-hid/Kconfig:
commit bf7660dab3 ("HID: stop drivers from selecting CONFIG_HID")
conflicts with commit 2afac81dd1 ("HID: fix I2C_HID not selected
when I2C_HID_OF_ELAN is")
the resolution is simple enough: just drop the "default" and "select"
lines as the new commit from Arnd is doing
In certain circumstances, such as when creating I2C-connected HID
devices, we want to pass and retain some quirks (axis inversion, etc).
The source of such quirks may be device tree, or DMI data, or something
else not readily available to the HID core itself and therefore cannot
be reconstructed easily. To allow this, introduce "initial_quirks" field
in hid_device structure and use it when determining the final set of
quirks.
This fixes the problem with i2c-hid setting up device-tree sourced
quirks too late and losing them on device rebind, and also allows to
sever the tie between hid-code and i2c-hid when applying DMI-based
quirks.
Fixes: b60d3c803d ("HID: i2c-hid-of: Expose the touchscreen-inverted properties")
Fixes: a2f416bf06 ("HID: multitouch: Add quirks for flipped axes")
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Allen Ballway <ballway@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/Y+LYwu3Zs13hdVDy@google.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The custom "debug" module parameter is fairly inflexible.
It can only manage debugging for all calls dbg_hid() at the same time.
Furthermore it creates a mismatch between calls to hid_dbg() which can
be managed by CONFIG_DYNAMIC_DEBUG and dbg_hid() which is managed by the
module parameter.
Furthermore the change to pr_debug() allows the debugging statements to
be completely compiled-out if desired.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20221223-hid-dbg-v1-1-5dcf8794f7f9@weissschuh.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Nothing is nor should be modifying these structs so mark them as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As there are no external users this implementation detail does not need
to be exported.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As there are no external users this implementation detail does not need
to be exported.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As there are no external users this implementation detail does not need
to be exported.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
