* kvm-arm64/sgi-injection:
: vSGI injection improvements + fixes, courtesy Marc Zyngier
:
: Avoid linearly searching for vSGI targets using a compressed MPIDR to
: index a cache. While at it, fix some egregious bugs in KVM's mishandling
: of vcpuid (user-controlled value) and vcpu_idx.
KVM: arm64: Clarify the ordering requirements for vcpu/RD creation
KVM: arm64: vgic-v3: Optimize affinity-based SGI injection
KVM: arm64: Fast-track kvm_mpidr_to_vcpu() when mpidr_data is available
KVM: arm64: Build MPIDR to vcpu index cache at runtime
KVM: arm64: Simplify kvm_vcpu_get_mpidr_aff()
KVM: arm64: Use vcpu_idx for invalidation tracking
KVM: arm64: vgic: Use vcpu_idx for the debug information
KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id
KVM: arm64: vgic-v3: Refactor GICv3 SGI generation
KVM: arm64: vgic-its: Treat the collection target address as a vcpu_id
KVM: arm64: vgic: Make kvm_vgic_inject_irq() take a vcpu pointer
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/pmevtyper-filter:
: Fixes to KVM's handling of the PMUv3 exception level filtering bits
:
: - NSH (count at EL2) and M (count at EL3) should be stateful when the
: respective EL is advertised in the ID registers but have no effect on
: event counting.
:
: - NSU and NSK modify the event filtering of EL0 and EL1, respectively.
: Though the kernel may not use these bits, other KVM guests might.
: Implement these bits exactly as written in the pseudocode if EL3 is
: advertised.
KVM: arm64: Add PMU event filter bits required if EL3 is implemented
KVM: arm64: Make PMEVTYPER<n>_EL0.NSH RES0 if EL2 isn't advertised
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
For unimplemented counters, the registers PM{C,I}NTEN{SET,CLR}
and PMOVS{SET,CLR} are expected to have the corresponding bits RAZ.
Hence to ensure correct KVM's PMU emulation, mask out the RES0 bits.
Defer this work to the point that userspace can no longer change the
number of advertised PMCs.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-7-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The number of PMU event counters is indicated in PMCR_EL0.N.
For a vCPU with PMUv3 configured, the value is set to the same
value as the current PE on every vCPU reset. Unless the vCPU is
pinned to PEs that has the PMU associated to the guest from the
initial vCPU reset, the value might be different from the PMU's
PMCR_EL0.N on heterogeneous PMU systems.
Fix this by setting the vCPU's PMCR_EL0.N to the PMU's PMCR_EL0.N
value. Track the PMCR_EL0.N per guest, as only one PMU can be set
for the guest (PMCR_EL0.N must be the same for all vCPUs of the
guest), and it is convenient for updating the value.
To achieve this, the patch introduces a helper,
kvm_arm_pmu_get_max_counters(), that reads the maximum number of
counters from the arm_pmu associated to the VM. Make the function
global as upcoming patches will be interested to know the value
while setting the PMCR.N of the guest from userspace.
KVM does not yet support userspace modifying PMCR_EL0.N.
The following patch will add support for that.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-5-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a helper to read a vCPU's PMCR_EL0, and use it whenever KVM
reads a vCPU's PMCR_EL0.
Currently, the PMCR_EL0 value is tracked per vCPU. The following
patches will make (only) PMCR_EL0.N track per guest. Having the
new helper will be useful to combine the PMCR_EL0.N field
(tracked per guest) and the other fields (tracked per vCPU)
to provide the value of PMCR_EL0.
No functional change intended.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-4-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Future changes to KVM's sysreg emulation will rely on having a valid PMU
instance to determine the number of implemented counters (PMCR_EL0.N).
This is earlier than when userspace is expected to modify the vPMU
device attributes, where the default is selected today.
Select the default PMU when handling KVM_ARM_VCPU_INIT such that it is
available in time for sysreg emulation.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-3-rananta@google.com
[Oliver: rewrite changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The NSH bit, which filters event counting at EL2, is required by the
architecture if an implementation has EL2. Even though KVM doesn't
support nested virt yet, it makes no effort to hide the existence of EL2
from the ID registers. Userspace can, however, change the value of PFR0
to hide EL2. Align KVM's sysreg emulation with the architecture and make
NSH RES0 if EL2 isn't advertised. Keep in mind the bit is ignored when
constructing the backing perf event.
While at it, build the event type mask using explicit field definitions
instead of relying on ARMV8_PMU_EVTYPE_MASK. KVM probably should've been
doing this in the first place, as it avoids changes to the
aforementioned mask affecting sysreg emulation.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231019185618.3442949-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Contrary to common belief, HCR_EL2.TGE has a direct and immediate
effect on the way the EL0 physical counter is offset. Flipping
TGE from 1 to 0 while at EL2 immediately changes the way the counter
compared to the CVAL limit.
This means that we cannot directly save/restore the guest's view of
CVAL, but that we instead must treat it as if CNTPOFF didn't exist.
Only in the world switch, once we figure out that we do have CNTPOFF,
can we must the offset back and forth depending on the polarity of
TGE.
Fixes: 2b4825a869 ("KVM: arm64: timers: Use CNTPOFF_EL2 to offset the physical timer")
Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Passing a vcpu_id to kvm_vgic_inject_irq() is silly for two reasons:
- we often confuse vcpu_id and vcpu_idx
- we eventually have to convert it back to a vcpu
- we can't count
Instead, pass a vcpu pointer, which is unambiguous. A NULL vcpu
is also allowed for interrupts that are not private to a vcpu
(such as SPIs).
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230927090911.3355209-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The vCPU-scoped feature bitmap was left in place a couple of releases
ago in case the change to VM-scoped vCPU features broke anyone. Nobody
has complained and the interop between VM and vCPU bitmaps is pretty
gross. Throw it out.
Link: https://lore.kernel.org/r/20230920195036.1169791-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Most of the internal definitions for PMU emulation are guarded with
CONFIG_HW_PERF_EVENTS. However, this isn't enough, and leads to
these definitions leaking if CONFIG_KVM isn't enabled.
This leads to some compilation breakage in this exact configuration.
Fix it by falling back to the dummy stubs if either perf or KVM
isn't selected.
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Huang Shijie reports that, when profiling a guest from the host
with a number of events that exceeds the number of available
counters, the reported counts are wildly inaccurate. Without
the counter oversubscription, the reported counts are correct.
Their investigation indicates that upon counter rotation (which
takes place on the back of a timer interrupt), we fail to
re-apply the guest EL0 enabling, leading to the counting of host
events instead of guest events.
In order to solve this, add yet another hook between the host PMU
driver and KVM, re-applying the guest EL0 configuration if the
right conditions apply (the host is VHE, we are in interrupt
context, and we interrupted a running vcpu). This triggers a new
vcpu request which will apply the correct configuration on guest
reentry.
With this, we have the correct counts, even when the counters are
oversubscribed.
Reported-by: Huang Shijie <shijie@os.amperecomputing.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Tested_by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230809013953.7692-1-shijie@os.amperecomputing.com
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230820090108.177817-1-maz@kernel.org
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable@vger.kernel.org
Fixes: 8e01d9a396 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Suggested-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- Fix unprotected vcpu->pid dereference via debugfs
- Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals
- Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=EGXd
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.5' of https://github.com/kvm-x86/linux into HEAD
Common KVM changes for 6.5:
- Fix unprotected vcpu->pid dereference via debugfs
- Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals
- Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code
- Misc cleanups
There's no longer a need for the baggage of the old scheme for handling
configurable ID register fields. Rip it all out in favor of the
generalized infrastructure.
Link: https://lore.kernel.org/r/20230609190054.1542113-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Current usage of kvm_io_device requires users to destruct it with an extra
call of kvm_iodevice_destructor after the device gets unregistered from
kvm_io_bus. This is not necessary and can cause errors if a user forgot
to make the extra call.
Simplify the usage by combining kvm_iodevice_destructor into
kvm_io_bus_unregister_dev. This reduces LOCs a bit for users and can
avoid the leakage of destructing the device explicitly.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230207123713.3905-2-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM allows userspace to write an IMPDEF PMU version to the corresponding
32bit and 64bit ID register fields for the sake of backwards
compatibility with kernels that lacked commit 3d0dba5764 ("KVM: arm64:
PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation"). Plumbing
that IMPDEF PMU version through to the gues is getting in the way of
progress, and really doesn't any sense in the first place.
Bite the bullet and reinterpret the IMPDEF PMU version as NI (0) for
userspace writes. Additionally, spill the dirty details into a comment.
Link: https://lore.kernel.org/r/20230609190054.1542113-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* More phys_to_virt conversions
* Improvement of AP management for VSIE (nested virtualization)
ARM64:
* Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
* New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
* Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
* A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
* The usual selftest fixes and improvements.
KVM x86 changes for 6.4:
* Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
* Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
* Move AMD_PSFD to cpufeatures.h and purge KVM's definition
* Avoid unnecessary writes+flushes when the guest is only adding new PTEs
* Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
when emulating invalidations
* Clean up the range-based flushing APIs
* Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
* Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
* Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
* Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, similar to CPUID features
* Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
* Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
x86 AMD:
* Add support for virtual NMIs
* Fixes for edge cases related to virtual interrupts
x86 Intel:
* Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
* Fix a bug in emulation of ENCLS in compatibility mode
* Allow emulation of NOP and PAUSE for L2
* AMX selftests improvements
* Misc cleanups
MIPS:
* Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
Generic:
* Drop unnecessary casts from "void *" throughout kvm_main.c
* Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
Documentation:
* Fix goof introduced by the conversion to rST
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
=S2Hq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
* kvm-arm64/smccc-filtering:
: .
: SMCCC call filtering and forwarding to userspace, courtesy of
: Oliver Upton. From the cover letter:
:
: "The Arm SMCCC is rather prescriptive in regards to the allocation of
: SMCCC function ID ranges. Many of the hypercall ranges have an
: associated specification from Arm (FF-A, PSCI, SDEI, etc.) with some
: room for vendor-specific implementations.
:
: The ever-expanding SMCCC surface leaves a lot of work within KVM for
: providing new features. Furthermore, KVM implements its own
: vendor-specific ABI, with little room for other implementations (like
: Hyper-V, for example). Rather than cramming it all into the kernel we
: should provide a way for userspace to handle hypercalls."
: .
KVM: selftests: Fix spelling mistake "KVM_HYPERCAL_EXIT_SMC" -> "KVM_HYPERCALL_EXIT_SMC"
KVM: arm64: Test that SMC64 arch calls are reserved
KVM: arm64: Prevent userspace from handling SMC64 arch range
KVM: arm64: Expose SMC/HVC width to userspace
KVM: selftests: Add test for SMCCC filter
KVM: selftests: Add a helper for SMCCC calls with SMC instruction
KVM: arm64: Let errors from SMCCC emulation to reach userspace
KVM: arm64: Return NOT_SUPPORTED to guest for unknown PSCI version
KVM: arm64: Introduce support for userspace SMCCC filtering
KVM: arm64: Add support for KVM_EXIT_HYPERCALL
KVM: arm64: Use a maple tree to represent the SMCCC filter
KVM: arm64: Refactor hvc filtering to support different actions
KVM: arm64: Start handling SMCs from EL1
KVM: arm64: Rename SMC/HVC call handler to reflect reality
KVM: arm64: Add vm fd device attribute accessors
KVM: arm64: Add a helper to check if a VM has ran once
KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALL
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/timer-vm-offsets: (21 commits)
: .
: This series aims at satisfying multiple goals:
:
: - allow a VMM to atomically restore a timer offset for a whole VM
: instead of updating the offset each time a vcpu get its counter
: written
:
: - allow a VMM to save/restore the physical timer context, something
: that we cannot do at the moment due to the lack of offsetting
:
: - provide a framework that is suitable for NV support, where we get
: both global and per timer, per vcpu offsetting, and manage
: interrupts in a less braindead way.
:
: Conflict resolution involves using the new per-vcpu config lock instead
: of the home-grown timer lock.
: .
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: selftests: Augment existing timer test to handle variable offset
KVM: arm64: selftests: Deal with spurious timer interrupts
KVM: arm64: selftests: Add physical timer registers to the sysreg list
KVM: arm64: nv: timers: Support hyp timer emulation
KVM: arm64: nv: timers: Add a per-timer, per-vcpu offset
KVM: arm64: Document KVM_ARM_SET_CNT_OFFSETS and co
KVM: arm64: timers: Abstract the number of valid timers per vcpu
KVM: arm64: timers: Fast-track CNTPCT_EL0 trap handling
KVM: arm64: Elide kern_hyp_va() in VHE-specific parts of the hypervisor
KVM: arm64: timers: Move the timer IRQs into arch_timer_vm_data
KVM: arm64: timers: Abstract per-timer IRQ access
KVM: arm64: timers: Rationalise per-vcpu timer init
KVM: arm64: timers: Allow save/restoring of the physical timer
KVM: arm64: timers: Allow userspace to set the global counter offset
KVM: arm64: Expose {un,}lock_all_vcpus() to the rest of KVM
KVM: arm64: timers: Allow physical offset without CNTPOFF_EL2
KVM: arm64: timers: Use CNTPOFF_EL2 to offset the physical timer
arm64: Add HAS_ECV_CNTPOFF capability
arm64: Add CNTPOFF_EL2 register definition
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
As the SMCCC (and related specifications) march towards an 'everything
and the kitchen sink' interface for interacting with a system it becomes
less likely that KVM will support every related feature. We could do
better by letting userspace have a crack at it instead.
Allow userspace to define an 'SMCCC filter' that applies to both HVCs
and SMCs initiated by the guest. Supporting both conduits with this
interface is important for a couple of reasons. Guest SMC usage is table
stakes for a nested guest, as HVCs are always taken to the virtual EL2.
Additionally, guests may want to interact with a service on the secure
side which can now be proxied by userspace.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-10-oliver.upton@linux.dev
Maple tree is an efficient B-tree implementation that is intended for
storing non-overlapping intervals. Such a data structure is a good fit
for the SMCCC filter as it is desirable to sparsely allocate the 32 bit
function ID space.
To that end, add a maple tree to kvm_arch and correctly init/teardown
along with the VM. Wire in a test against the hypercall filter for HVCs
which does nothing until the controls are exposed to userspace.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-8-oliver.upton@linux.dev
KVM handles SMCCC calls from virtual EL2 that use the SMC instruction
since commit bd36b1a9eb ("KVM: arm64: nv: Handle SMCs taken from
virtual EL2"). Thus, the function name of the handler no longer reflects
reality.
Normalize the name on SMCCC, since that's the only hypercall interface
KVM supports in the first place. No fuctional change intended.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230404154050.2270077-5-oliver.upton@linux.dev
Emulating EL2 also means emulating the EL2 timers. To do so, we expand
our timer framework to deal with at most 4 timers. At any given time,
two timers are using the HW timers, and the two others are purely
emulated.
The role of deciding which is which at any given time is left to a
mapping function which is called every time we need to make such a
decision.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-18-maz@kernel.org
Being able to set a global offset isn't enough.
With NV, we also need to a per-vcpu, per-timer offset (for example,
CNTVCT_EL0 being offset by CNTVOFF_EL2).
Use a similar method as the VM-wide offset to have a timer point
to the shadow register that contains the offset value.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-17-maz@kernel.org
Having the timer IRQs duplicated into each vcpu isn't great, and
becomes absolutely awful with NV. So let's move these into
the per-VM arch_timer_vm_data structure.
This simplifies a lot of code, but requires us to introduce a
mutex so that we can reason about userspace trying to change
an interrupt number while another vcpu is running, something
that wasn't really well handled so far.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-12-maz@kernel.org
As we are about to move the location of the per-timer IRQ into
the VM structure, abstract the location of the IRQ behind an
accessor. This will make the repainting sligntly less painful.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-11-maz@kernel.org
The way we initialise our timer contexts may be satisfactory
for two timers, but will be getting pretty annoying with four.
Cleanup the whole thing by removing the code duplication and
getting rid of unused IRQ configuration elements.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-10-maz@kernel.org
With ECV and CNTPOFF_EL2, it is very easy to offer an offset for
the physical timer. So let's do just that.
Nothing can set the offset yet, so this should have no effect
whatsoever (famous last words...).
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-5-maz@kernel.org
Instead of accumulating the fractional ns value generated every time
we compute a ns delta in a global variable, use a per-vcpu, per-timer
variable. This keeps the fractional ns local to the timer instead of
contributing to any odd, unrelated timer.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-2-maz@kernel.org
Having the ARM PMUv3 driver sitting in arch/arm64/kernel is getting
in the way of being able to use perf on ARMv8 cores running a 32bit
kernel, such as 32bit KVM guests.
This patch moves it into drivers/perf/arm_pmuv3.c, with an include
file in include/linux/perf/arm_pmuv3.h. The only thing left in
arch/arm64 is some mundane perf stuff.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Zaid Al-Bassam <zalbassam@google.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230317195027.3746949-2-zalbassam@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Having a per-vcpu virtual offset is a pain. It needs to be synchronized
on each update, and expands badly to a setup where different timers can
have different offsets, or have composite offsets (as with NV).
So let's start by replacing the use of the CNTVOFF_EL2 shadow register
(which we want to reclaim for NV anyway), and make the virtual timer
carry a pointer to a VM-wide offset.
This simplifies the code significantly. It also addresses two terrible bugs:
- The use of CNTVOFF_EL2 leads to some nice offset corruption
when the sysreg gets reset, as reported by Joey.
- The kvm mutex is taken from a vcpu ioctl, which goes against
the locking rules...
Reported-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230224173915.GA17407@e124191.cambridge.arm.com
Tested-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20230224191640.3396734-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Currently, the unknown no-running-vcpu sites are reported when a
dirty page is tracked by mark_page_dirty_in_slot(). Until now, the
only known no-running-vcpu site is saving vgic/its tables through
KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_SAVE_TABLES} command on KVM device
"kvm-arm-vgic-its". Unfortunately, there are more unknown sites to
be handled and no-running-vcpu context will be allowed in these
sites: (1) KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_RESTORE_TABLES} command
on KVM device "kvm-arm-vgic-its" to restore vgic/its tables. The
vgic3 LPI pending status could be restored. (2) Save vgic3 pending
table through KVM_DEV_ARM_{VGIC_GRP_CTRL, VGIC_SAVE_PENDING_TABLES}
command on KVM device "kvm-arm-vgic-v3".
In order to handle those unknown cases, we need a unified helper
vgic_write_guest_lock(). struct vgic_dist::save_its_tables_in_progress
is also renamed to struct vgic_dist::save_tables_in_progress.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230126235451.469087-3-gshan@redhat.com
Define pr_fmt using KBUILD_MODNAME for all KVM x86 code so that printks
use consistent formatting across common x86, Intel, and AMD code. In
addition to providing consistent print formatting, using KBUILD_MODNAME,
e.g. kvm_amd and kvm_intel, allows referencing SVM and VMX (and SEV and
SGX and ...) as technologies without generating weird messages, and
without causing naming conflicts with other kernel code, e.g. "SEV: ",
"tdx: ", "sgx: " etc.. are all used by the kernel for non-KVM subsystems.
Opportunistically move away from printk() for prints that need to be
modified anyways, e.g. to drop a manual "kvm: " prefix.
Opportunistically convert a few SGX WARNs that are similarly modified to
WARN_ONCE; in the very unlikely event that the WARNs fire, odds are good
that they would fire repeatedly and spam the kernel log without providing
unique information in each print.
Note, defining pr_fmt yields undesirable results for code that uses KVM's
printk wrappers, e.g. vcpu_unimpl(). But, that's a pre-existing problem
as SVM/kvm_amd already defines a pr_fmt, and thankfully use of KVM's
wrappers is relatively limited in KVM x86 code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20221130230934.1014142-35-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For a number of historical reasons, the KVM/arm64 hotplug setup is pretty
complicated, and we have two extra CPUHP notifiers for vGIC and timers.
It looks pretty pointless, and gets in the way of further changes.
So let's just expose some helpers that can be called from the core
CPUHP callback, and get rid of everything else.
This gives us the opportunity to drop a useless notifier entry,
as well as tidy-up the timer enable/disable, which was a bit odd.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kvm-arm64/pmu-unchained:
: .
: PMUv3 fixes and improvements:
:
: - Make the CHAIN event handling strictly follow the architecture
:
: - Add support for PMUv3p5 (64bit counters all the way)
:
: - Various fixes and cleanups
: .
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: arm64: PMU: Sanitise PMCR_EL0.LP on first vcpu run
KVM: arm64: PMU: Simplify PMCR_EL0 reset handling
KVM: arm64: PMU: Replace version number '0' with ID_AA64DFR0_EL1_PMUVer_NI
KVM: arm64: PMU: Make kvm_pmc the main data structure
KVM: arm64: PMU: Simplify vcpu computation on perf overflow notification
KVM: arm64: PMU: Allow PMUv3p5 to be exposed to the guest
KVM: arm64: PMU: Implement PMUv3p5 long counter support
KVM: arm64: PMU: Allow ID_DFR0_EL1.PerfMon to be set from userspace
KVM: arm64: PMU: Allow ID_AA64DFR0_EL1.PMUver to be set from userspace
KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation
KVM: arm64: PMU: Do not let AArch32 change the counters' top 32 bits
KVM: arm64: PMU: Simplify setting a counter to a specific value
KVM: arm64: PMU: Add counter_index_to_*reg() helpers
KVM: arm64: PMU: Only narrow counters that are not 64bit wide
KVM: arm64: PMU: Narrow the overflow checking when required
KVM: arm64: PMU: Distinguish between 64bit counter and 64bit overflow
KVM: arm64: PMU: Always advertise the CHAIN event
KVM: arm64: PMU: Align chained counter implementation with architecture pseudocode
arm64: Add ID_DFR0_EL1.PerfMon values for PMUv3p7 and IMP_DEF
Signed-off-by: Marc Zyngier <maz@kernel.org>
PMUv3p5 (which is mandatory with ARMv8.5) comes with some extra
features:
- All counters are 64bit
- The overflow point is controlled by the PMCR_EL0.LP bit
Add the required checks in the helpers that control counter
width and overflow, as well as the sysreg handling for the LP
bit. A new kvm_pmu_is_3p5() helper makes it easy to spot the
PMUv3p5 specific handling.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-14-maz@kernel.org
As further patches will enable the selection of a PMU revision
from userspace, sample the supported PMU revision at VM creation
time, rather than building each time the ID_AA64DFR0_EL1 register
is accessed.
This shouldn't result in any change in behaviour.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-11-maz@kernel.org
Ricardo recently pointed out that the PMU chained counter emulation
in KVM wasn't quite behaving like the one on actual hardware, in
the sense that a chained counter would expose an overflow on
both halves of a chained counter, while KVM would only expose the
overflow on the top half.
The difference is subtle, but significant. What does the architecture
say (DDI0087 H.a):
- Up to PMUv3p4, all counters but the cycle counter are 32bit
- A 32bit counter that overflows generates a CHAIN event on the
adjacent counter after exposing its own overflow status
- The CHAIN event is accounted if the counter is correctly
configured (CHAIN event selected and counter enabled)
This all means that our current implementation (which uses 64bit
perf events) prevents us from emulating this overflow on the lower half.
How to fix this? By implementing the above, to the letter.
This largely results in code deletion, removing the notions of
"counter pair", "chained counters", and "canonical counter".
The code is further restructured to make the CHAIN handling similar
to SWINC, as the two are now extremely similar in behaviour.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20221113163832.3154370-3-maz@kernel.org
Enable ring-based dirty memory tracking on ARM64:
- Enable CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL.
- Enable CONFIG_NEED_KVM_DIRTY_RING_WITH_BITMAP.
- Set KVM_DIRTY_LOG_PAGE_OFFSET for the ring buffer's physical page
offset.
- Add ARM64 specific kvm_arch_allow_write_without_running_vcpu() to
keep the site of saving vgic/its tables out of the no-running-vcpu
radar.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-5-gshan@redhat.com
Align kvm_vgic_addr() with the rest of the code by moving the
userspace accesses into it. kvm_vgic_addr() is also made static.
Signed-off-by: Marc Zyngier <maz@kernel.org>
We carry a legacy interface to set the base addresses for GICv2.
As this is currently plumbed into the same handling code as
the modern interface, it limits the evolution we can make there.
Add a helper dedicated to this handling, with a view of maybe
removing this in the future.
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/per-vcpu-host-pmu-data:
: .
: Pass the host PMU state in the vcpu to avoid the use of additional
: shared memory between EL1 and EL2 (this obviously only applies
: to nVHE and Protected setups).
:
: Patches courtesy of Fuad Tabba.
: .
KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selected
KVM: arm64: Reenable pmu in Protected Mode
KVM: arm64: Pass pmu events to hyp via vcpu
KVM: arm64: Repack struct kvm_pmu to reduce size
KVM: arm64: Wrapper for getting pmu_events
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/hcall-selection:
: .
: Introduce a new set of virtual sysregs for userspace to
: select the hypercalls it wants to see exposed to the guest.
:
: Patches courtesy of Raghavendra and Oliver.
: .
KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run
KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace
Documentation: Fix index.rst after psci.rst renaming
selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list
selftests: KVM: aarch64: Introduce hypercall ABI test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
tools: Import ARM SMCCC definitions
Docs: KVM: Add doc for the bitmap firmware registers
Docs: KVM: Rename psci.rst to hypercalls.rst
KVM: arm64: Add vendor hypervisor firmware register
KVM: arm64: Add standard hypervisor firmware register
KVM: arm64: Setup a framework for hypercall bitmap firmware registers
KVM: arm64: Factor out firmware register handling from psci.c
Signed-off-by: Marc Zyngier <maz@kernel.org>
Moving kvm_pmu_events into the vcpu (and refering to it) broke the
somewhat unusual case where the kernel has no support for a PMU
at all.
In order to solve this, move things around a bit so that we can
easily avoid refering to the pmu structure outside of PMU-aware
code. As a bonus, pmu.c isn't compiled in when HW_PERF_EVENTS
isn't selected.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/202205161814.KQHpOzsJ-lkp@intel.com
Instead of the host accessing hyp data directly, pass the pmu
events of the current cpu to hyp via the vcpu.
This adds 64 bits (in two fields) to the vcpu that need to be
synced before every vcpu run in nvhe and protected modes.
However, it isolates the hypervisor from the host, which allows
us to use pmu in protected mode in a subsequent patch.
No visible side effects in behavior intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-4-tabba@google.com
struct kvm_pmu has 2 holes using 10 bytes. This is instantiated
in all vcpus, so it adds up. Repack the structures to remove the
holes.
No functional change intended.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-3-tabba@google.com
Since adversising GICR_CTLR.{IC,CES} is directly observable from
a guest, we need to make it selectable from userspace.
For that, bump the default GICD_IIDR revision and let userspace
downgrade it to the previous default. For GICv2, the two distributor
revisions are strictly equivalent.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-5-maz@kernel.org
Since GICv4.1, it has become legal for an implementation to advertise
GICR_{INVLPIR,INVALLR,SYNCR} while having an ITS, allowing for a more
efficient invalidation scheme (no guest command queue contention when
multiple CPUs are generating invalidations).
Provide the invalidation registers as a primitive to their ITS
counterpart. Note that we don't advertise them to the guest yet
(the architecture allows an implementation to do this).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Link: https://lore.kernel.org/r/20220405182327.205520-4-maz@kernel.org
When disabling LPIs, a guest needs to poll GICR_CTLR.RWP in order
to be sure that the write has taken effect. We so far reported it
as 0, as we didn't advertise that LPIs could be turned off the
first place.
Start tracking this state during which LPIs are being disabled,
and expose the 'in progress' state via the RWP bit.
We also take this opportunity to disallow enabling LPIs and programming
GICR_{PEND,PROP}BASER while LPI disabling is in progress, as allowed by
the architecture (UNPRED behaviour).
We don't advertise the feature to the guest yet (which is allowed by
the architecture).
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-3-maz@kernel.org
KVM regularly introduces new hypercall services to the guests without
any consent from the userspace. This means, the guests can observe
hypercall services in and out as they migrate across various host
kernel versions. This could be a major problem if the guest
discovered a hypercall, started using it, and after getting migrated
to an older kernel realizes that it's no longer available. Depending
on how the guest handles the change, there's a potential chance that
the guest would just panic.
As a result, there's a need for the userspace to elect the services
that it wishes the guest to discover. It can elect these services
based on the kernels spread across its (migration) fleet. To remedy
this, extend the existing firmware pseudo-registers, such as
KVM_REG_ARM_PSCI_VERSION, but by creating a new COPROC register space
for all the hypercall services available.
These firmware registers are categorized based on the service call
owners, but unlike the existing firmware pseudo-registers, they hold
the features supported in the form of a bitmap.
During the VM initialization, the registers are set to upper-limit of
the features supported by the corresponding registers. It's expected
that the VMMs discover the features provided by each register via
GET_ONE_REG, and write back the desired values using SET_ONE_REG.
KVM allows this modification only until the VM has started.
Some of the standard features are not mapped to any bits of the
registers. But since they can recreate the original problem of
making it available without userspace's consent, they need to
be explicitly added to the case-list in
kvm_hvc_call_default_allowed(). Any function-id that's not enabled
via the bitmap, or not listed in kvm_hvc_call_default_allowed, will
be returned as SMCCC_RET_NOT_SUPPORTED to the guest.
Older userspace code can simply ignore the feature and the
hypercall services will be exposed unconditionally to the guests,
thus ensuring backward compatibility.
In this patch, the framework adds the register only for ARM's standard
secure services (owner value 4). Currently, this includes support only
for ARM True Random Number Generator (TRNG) service, with bit-0 of the
register representing mandatory features of v1.0. Other services are
momentarily added in the upcoming patches.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
[maz: reduced the scope of some helpers, tidy-up bitmap max values,
dropped error-only fast path]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-3-rananta@google.com
Common hypercall firmware register handing is currently employed
by psci.c. Since the upcoming patches add more of these registers,
it's better to move the generic handling to hypercall.c for a
cleaner presentation.
While we are at it, collect all the firmware registers under
fw_reg_ids[] to help implement kvm_arm_get_fw_num_regs() and
kvm_arm_copy_fw_reg_indices() in a generic way. Also, define
KVM_REG_FEATURE_LEVEL_MASK using a GENMASK instead.
No functional change intended.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
[maz: fixed KVM_REG_FEATURE_LEVEL_MASK]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-2-rananta@google.com
kvm_cpu_has_pending_timer() ends up checking all the possible
timers for a wake-up cause. However, we already check for
pending interrupts whenever we try to wake-up a vcpu, including
the timer interrupts.
Obviously, doing the same work twice is once too many. Reduce
this helper to almost nothing, but keep it around, as we are
going to make use of it soon.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419182755.601427-4-maz@kernel.org
* kvm-arm64/psci-1.1:
: .
: Limited PSCI-1.1 support from Will Deacon:
:
: This small series exposes the PSCI SYSTEM_RESET2 call to guests, which
: allows the propagation of a "reset_type" and a "cookie" back to the VMM.
: Although Linux guests only ever pass 0 for the type ("SYSTEM_WARM_RESET"),
: the vendor-defined range can be used by a bootloader to provide additional
: information about the reset, such as an error code.
: .
KVM: arm64: Remove unneeded semicolons
KVM: arm64: Indicate SYSTEM_RESET2 in kvm_run::system_event flags field
KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest
KVM: arm64: Bump guest PSCI version to 1.1
Signed-off-by: Marc Zyngier <maz@kernel.org>
Expose PSCI version v1.1 to the guest by default. The only difference
for now is that an updated version number is reported by PSCI_VERSION.
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220221153524.15397-2-will@kernel.org
* kvm-arm64/pmu-bl:
: .
: Improve PMU support on heterogeneous systems, courtesy of Alexandru Elisei
: .
KVM: arm64: Refuse to run VCPU if the PMU doesn't match the physical CPU
KVM: arm64: Add KVM_ARM_VCPU_PMU_V3_SET_PMU attribute
KVM: arm64: Keep a list of probed PMUs
KVM: arm64: Keep a per-VM pointer to the default PMU
perf: Fix wrong name in comment for struct perf_cpu_context
KVM: arm64: Do not change the PMU event filter after a VCPU has run
Signed-off-by: Marc Zyngier <maz@kernel.org>
The ARM PMU driver calls kvm_host_pmu_init() after probing to tell KVM that
a hardware PMU is available for guest emulation. Heterogeneous systems can
have more than one PMU present, and the callback gets called multiple
times, once for each of them. Keep track of all the PMUs available to KVM,
as they're going to be needed later.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-5-alexandru.elisei@arm.com
kvm_psci_version() consumes a pointer to struct kvm in addition to a
vcpu pointer. Drop the kvm pointer as it is unused. While the comment
suggests the explicit kvm pointer was useful for calling from hyp, there
exist no such callsite in hyp.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220208012705.640444-1-oupton@google.com
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHhxvsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPZkAf+Nz92UL/5nNGcdHtE4m7AToMmitE9
bYkesf9BMQvAe5wjkABLuoHGi6ay4jabo4fiGzbdkiK7lO5YgfsWiMB3/MT5fl4E
jRPzaVQabp3YZLM8UYCBmfUVuRj524S967SfSRe0AvYjDEH8y7klPf4+7sCsFT0/
Px9Vf2KGuOlf0eM78yKg4rGaF0jS22eLgXm6FfNMY8/e29ZAo/jyUmqBY+Z2xxZG
aWhceDtSheW1jwLHLj3nOlQJvHTn8LVGXBE/R8Gda3ZjrBV2rKaDi4Fh+HD+dz86
2zVXwzQ7uck2CMW73GMoXMTWoKSHMyvlBOs1BdvBm4UsnGcXR+q8IFCeuQ==
=s73m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
arm_vgic.h does not require all the stuff that kernel.h provides.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220104151940.55399-1-andriy.shevchenko@linux.intel.com
Move the definition of kvm_arm_pmu_available to pmu-emul.c and, out of
"necessity", hide it behind CONFIG_HW_PERF_EVENTS. Provide a stub for
the key's wrapper, kvm_arm_support_pmu_v3(). Moving the key's definition
out of perf.c will allow a future commit to delete perf.c entirely.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211111020738.2512932-16-seanjc@google.com
Russell reported that since 5.13, KVM's probing of the PMU has
started to fail on his HW. As it turns out, there is an implicit
ordering dependency between the architectural PMU probing code and
and KVM's own probing. If, due to probe ordering reasons, KVM probes
before the PMU driver, it will fail to detect the PMU and prevent it
from being advertised to guests as well as the VMM.
Obviously, this is one probing too many, and we should be able to
deal with any ordering.
Add a callback from the PMU code into KVM to advertise the registration
of a host CPU PMU, allowing for any probing order.
Fixes: 5421db1be3 ("KVM: arm64: Divorce the perf code from oprofile helpers")
Reported-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YUYRKVflRtUytzy5@shell.armlinux.org.uk
Cc: stable@vger.kernel.org
In order to deal with these systems that do not offer HW-based
deactivation of interrupts, let implement a SW-based approach:
- When the irq is queued into a LR, treat it as a pure virtual
interrupt and set the EOI flag in the LR.
- When the interrupt state is read back from the LR, force a
deactivation when the state is invalid (neither active nor
pending)
Interrupts requiring such treatment get the VGIC_SW_RESAMPLE flag.
Signed-off-by: Marc Zyngier <maz@kernel.org>
We already have the option to attach a callback to an interrupt
to retrieve its pending state. As we are planning to expand this
facility, move this callback into its own data structure.
This will limit the size of individual interrupts as the ops
structures can be shared across multiple interrupts.
Signed-off-by: Marc Zyngier <maz@kernel.org>
The vGIC, as architected by ARM, allows a virtual interrupt to
trigger the deactivation of a physical interrupt. This allows
the following interrupt to be delivered without requiring an exit.
However, some implementations have choosen not to implement this,
meaning that we will need some unsavoury workarounds to deal with this.
On detecting such a case, taint the kernel and spit a nastygram.
We'll deal with this in later patches.
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM/arm64 is the sole user of perf_num_counters(), and really
could do without it. Stop using the obsolete API by relying on
the existing probing code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210414134409.1266357-2-maz@kernel.org
Commit 23bde34771 ("KVM: arm64: vgic-v3: Drop the
reporting of GICR_TYPER.Last for userspace") temporarily fixed
a bug identified when attempting to access the GICR_TYPER
register before the redistributor region setting, but dropped
the support of the LAST bit.
Emulating the GICR_TYPER.Last bit still makes sense for
architecture compliance though. This patch restores its support
(if the redistributor region was set) while keeping the code safe.
We introduce a new helper, vgic_mmio_vcpu_rdist_is_last() which
computes whether a redistributor is the highest one of a series
of redistributor contributor pages.
With this new implementation we do not need to have a uaccess
read accessor anymore.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405163941.510258-9-eric.auger@redhat.com
We currently find out about the presence of a HW PMU (or the handling
of that PMU by perf, which amounts to the same thing) in a fairly
roundabout way, by checking the number of counters available to perf.
That's good enough for now, but we will soon need to find about about
that on paths where perf is out of reach (in the world switch).
Instead, let's turn kvm_arm_support_pmu_v3() into a static key.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210209114844.3278746-2-maz@kernel.org
Message-Id: <20210305185254.3730990-5-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_ARM_PMU only existed for the benefit of 32bit ARM hosts,
and makes no sense now that we are 64bit only. Get rid of it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to reduce the impact of the VPT parsing happening on the GIC,
we can split the vcpu reseidency in two phases:
- programming GICR_VPENDBASER: this still happens in vcpu_load()
- checking for the VPT parsing to be complete: this can happen
on vcpu entry (in kvm_vgic_flush_hwstate())
This allows the GIC and the CPU to work in parallel, rewmoving some
of the entry overhead.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201128141857.983-3-lushenming@huawei.com
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes
For x86, also included in this pull request is a new alternative and
(in the future) more scalable implementation of extended page tables
that does not need a reverse map from guest physical addresses to
host physical addresses. For now it is disabled by default because
it is still lacking a few of the existing MMU's bells and whistles.
However it is a very solid piece of work and it is already available
for people to hammer on it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX
Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs
tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn
Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr
STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu
qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg==
=AD6a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
As we can now hide events from the guest, let's also adjust its view of
PCMEID{0,1}_EL1 so that it can figure out why some common events are not
counting as they should.
The astute user can still look into the TRM for their CPU and find out
they've been cheated, though. Nobody's perfect.
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm_vcpu_kick() is not NMI safe. When the overflow handler is called from
NMI context, defer waking the vcpu to an irq_work queue.
A vcpu can be freed while it's not running by kvm_destroy_vm(). Prevent
running the irq_work for a non-existent vcpu by calling irq_work_sync() on
the PMU destroy path.
[Alexandru E.: Added irq_work_sync()]
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org> (Developerbox)
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: kvm@vger.kernel.org
Cc: kvmarm@lists.cs.columbia.edu
Link: https://lore.kernel.org/r/20200924110706.254996-6-alexandru.elisei@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Move the timer gsisters to the sysreg file. This will further help when
they are directly changed by a nesting hypervisor in the VNCR page.
This requires moving the initialisation of the timer struct so that some
of the helpers (such as arch_timer_ctx_index) can work correctly at an
early stage.
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm_timer_sync_hwstate() has nothing to do with the timer HW state,
but more to do with the state of a userspace interrupt controller.
Change the suffix from _hwstate to_user, in keeping with the rest
of the code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
If we move the used_lrs field to the version-specific cpu interface
structure, the following functions only operate on the struct
vgic_v3_cpu_if and not the full vcpu:
__vgic_v3_save_state
__vgic_v3_restore_state
__vgic_v3_activate_traps
__vgic_v3_deactivate_traps
__vgic_v3_save_aprs
__vgic_v3_restore_aprs
This is going to be very useful for nested virt, so move the used_lrs
field and change the prototypes and implementations of these functions to
take the cpu_if parameter directly.
No functional change.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.
Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest. Nothing calls
this code so far, but a later patch will plug it into the MMIO
emulation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-20-maz@kernel.org
In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.
This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org
Fix various comments, including wrong function names, grammar mistakes
and specification references.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191029071919.177-3-yuzenghui@huawei.com
The callsite of kvm_send_userspace_msi() is currently arch agnostic.
There seems no reason to keep an extra declaration of it in arm_vgic.h
(we already have one in include/linux/kvm_host.h).
Remove it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191029071919.177-2-yuzenghui@huawei.com
When the VHE code was reworked, a lot of the vgic stuff was moved around,
but the GICv4 residency code did stay untouched, meaning that we come
in and out of residency on each flush/sync, which is obviously suboptimal.
To address this, let's move things around a bit:
- Residency entry (flush) moves to vcpu_load
- Residency exit (sync) moves to vcpu_put
- On blocking (entry to WFI), we "put"
- On unblocking (exit from WFI), we "load"
Because these can nest (load/block/put/load/unblock/put, for example),
we now have per-VPE tracking of the residency state.
Additionally, vgic_v4_put gains a "need doorbell" parameter, which only
gets set to true when blocking because of a WFI. This allows a finer
control of the doorbell, which now also gets disabled as soon as
it gets signaled.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191027144234.8395-2-maz@kernel.org
We currently intertwine the KVM PSCI implementation with the general
dispatch of hypercall handling, which makes perfect sense because PSCI
is the only category of hypercalls we support.
However, as we are about to support additional hypercalls, factor out
this functionality into a separate hypercall handler file.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[steven.price@arm.com: rebased]
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
At the moment we use 2 IO devices per GICv3 redistributor: one
one for the RD_base frame and one for the SGI_base frame.
Instead we can use a single IO device per redistributor (the 2
frames are contiguous). This saves slots on the KVM_MMIO_BUS
which is currently limited to NR_IOBUS_DEVS (1000).
This change allows to instantiate up to 512 redistributors and may
speed the guest boot with a large number of VCPUs.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add the basic data structure that expresses an MSI to LPI
translation as well as the allocation/release hooks.
The size of the cache is arbitrarily defined as 16*nr_vcpus.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since commit commit 328e566479 ("KVM: arm/arm64: vgic: Defer
touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or
its GICv2 equivalent) loaded as long as we can, only syncing it
back when we're scheduled out.
There is a small snag with that though: kvm_vgic_vcpu_pending_irq(),
which is indirectly called from kvm_vcpu_check_block(), needs to
evaluate the guest's view of ICC_PMR_EL1. At the point were we
call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever
changes to PMR is not visible in memory until we do a vcpu_put().
Things go really south if the guest does the following:
mov x0, #0 // or any small value masking interrupts
msr ICC_PMR_EL1, x0
[vcpu preempted, then rescheduled, VMCR sampled]
mov x0, #ff // allow all interrupts
msr ICC_PMR_EL1, x0
wfi // traps to EL2, so samping of VMCR
[interrupt arrives just after WFI]
Here, the hypervisor's view of PMR is zero, while the guest has enabled
its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no
interrupts are pending (despite an interrupt being received) and we'll
block for no reason. If the guest doesn't have a periodic interrupt
firing once it has blocked, it will stay there forever.
To avoid this unfortuante situation, let's resync VMCR from
kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block()
will observe the latest value of PMR.
This has been found by booting an arm64 Linux guest with the pseudo NMI
feature, and thus using interrupt priorities to mask interrupts instead
of the usual PSTATE masking.
Cc: stable@vger.kernel.org # 4.12
Fixes: 328e566479 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put")
Signed-off-by: Marc Zyngier <maz@kernel.org>
We use "pmc->idx" and the "chained" bitmap to determine if the pmc is
chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized
(and random) when we doing this decision, through a KVM_ARM_VCPU_INIT
ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random
idx will potentially hit a KASAN BUG [1].
In general, idx is the static property of a PMU counter that is not
expected to be modified across resets, as suggested by Julien. It
looks more reasonable if we can setup the PMU counter idx for a vcpu
in its creation time. Introduce a new function - kvm_pmu_vcpu_init()
for this basic setup. Oh, and the KASAN BUG will get fixed this way.
[1] https://www.spinics.net/lists/kvm-arm/msg36700.html
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Suggested-by: Andrew Murray <andrew.murray@arm.com>
Suggested-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
ARMv8 provides support for chained PMU counters, where an event type
of 0x001E is set for odd-numbered counters, the event counter will
increment by one for each overflow of the preceding even-numbered
counter. Let's emulate this in KVM by creating a 64 bit perf counter
when a user chains two emulated counters together.
For chained events we only support generating an overflow interrupt
on the high counter. We use the attributes of the low counter to
determine the attributes of the perf event.
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently use pmc->bitmask to determine the width of the pmc - however
it's superfluous as the pmc index already describes if the pmc is a cycle
counter or event counter. The architecture clearly describes the widths of
these counters.
Let's remove the bitmask to simplify the code.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The kvm_pmu_{enable/disable}_counter functions can enable/disable
multiple counters at once as they operate on a bitmask. Let's
make this clearer by renaming the function.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with this program if
not see http www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 15 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000437.237481593@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
for 32-bit guests
s390: interrupt cleanup, introduction of the Guest Information Block,
preparation for processor subfunctions in cpu models
PPC: bug fixes and improvements, especially related to machine checks
and protection keys
x86: many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations; plus AVIC fixes.
Generic: memcg accounting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJci+7XAAoJEL/70l94x66DUMkIAKvEefhceySHYiTpfefjLjIC
16RewgHa+9CO4Oo5iXiWd90fKxtXLXmxDQOS4VGzN0rxvLGRw/fyXIxL1MDOkaAO
l8SLSNuewY4XBUgISL3PMz123r18DAGOuy9mEcYU/IMesYD2F+wy5lJ17HIGq6X2
RpoF1p3qO1jfkPTKOob6Ixd4H5beJNPKpdth7LY3PJaVhDxgouj32fxnLnATVSnN
gENQ10fnt8BCjshRYW6Z2/9bF15JCkUFR1xdBW2/xh1oj+kvPqqqk2bEN1eVQzUy
2hT/XkwtpthqjSbX8NNavWRSFnOnbMLTRKQyIXmFVsM5VoSrwtiGsCFzBgcT++I=
=XIzU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- some cleanups
- direct physical timer assignment
- cache sanitization for 32-bit guests
s390:
- interrupt cleanup
- introduction of the Guest Information Block
- preparation for processor subfunctions in cpu models
PPC:
- bug fixes and improvements, especially related to machine checks
and protection keys
x86:
- many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations
- AVIC fixes
Generic:
- memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
kvm: vmx: fix formatting of a comment
KVM: doc: Document the life cycle of a VM and its resources
MAINTAINERS: Add KVM selftests to existing KVM entry
Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
KVM: PPC: Fix compilation when KVM is not enabled
KVM: Minor cleanups for kvm_main.c
KVM: s390: add debug logging for cpu model subfunctions
KVM: s390: implement subfunction processor calls
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
KVM: arm/arm64: Remove unused timer variable
KVM: PPC: Book3S: Improve KVM reference counting
KVM: PPC: Book3S HV: Fix build failure without IOMMU support
Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
x86: kvmguest: use TSC clocksource if invariant TSC is exposed
KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
...
