The calling conventions for xfs_getfsmap_helper are confusing -- callers
pass in an rmap record, but they must also supply startblock and
blockcount in daddr units. This was bolted onto the original fsmap
implementation so that we could report *something* for realtime
volumes, which do not support rmap and hence can draw only from the rt
free space bitmap. Free space on the rt volume can be more than 2^32
fsblocks long, which means that we can't use the rmap startblock or
blockcount fields.
This is confusing for callers, because they must supplying redundant
data, but not all of it is used. Streamline this by creating a separate
fsmap irec structure that contains exactly the data we need, once.
Note that we actually do need rm_startblock for rmap key comparisons
when we're actually querying an rmap btree, so leave that field but
document why it's there.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Plumb in the bits we need to load metadata inodes from a named entry in
a metadir directory, create (or hardlink) inodes into a metadir
directory, create metadir directories, and flag inodes as being metadata
files.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Replace the pag pointers in the type specific union with a generic
xfs_group pointer. This prepares for adding realtime group support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Prepare for tracking busy RT extents by passing the generic group
structure to the xfs_extent_busy_class tracepoints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Prepare supporting the upcoming realtime groups feature by moving the
deferred operation draining to the generic xfs_group structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Prepare for also tracking the health status of the upcoming realtime
groups by moving the health tracking code to the generic xfs_group
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split the lookup and refcount handling of struct xfs_perag into an
embedded xfs_group structure that can be reused for the upcoming
realtime groups.
It will be extended with more features later.
Note that he xg_type field will only need a single bit even with
realtime group support. For now it fills a hole, but it might be
worth to fold it into another field if we can use this space better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Convert all tracepoints that take [mp,agno] tuples to take a pag argument
instead so that decoding only happens when tracepoints are enabled and to
clean up the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
So that decoding is only done when tracing is actually enabled and the
call site look a lot neater.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the perag structure and the irec to these tracepoints so that the
decoding is only done when tracing is actually enabled and the call sites
look a lot neater.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
And remove the single instance class indirection for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Trace points never modify their arguments. Mark all the pag objects
passed to trace points. The exception is the xfs_ag_resv_class, which
uses the xfs_perag_resv helper that can't be marked const due to
other users modifying the returned structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_free_ag_extent already has a pointer to the pag structure through
the agf buffer. Use that instead of passing the redundant argument,
and do the same for the tracepoint.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split the xfs_filemap_fault trace event into separate ones for read and
write faults and move them into the applicable locations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When the main loop in xfs_filestream_pick_ag fails to find a suitable
AG it tries to just pick the online AG. But the loop for that uses
args->pag as loop iterator while the later code expects pag to be
set. Fix this by reusing the max_pag case for this last resort, and
also add a check for impossible case of no AG just to make sure that
the uninitialized pag doesn't even escape in theory.
Reported-by: syzbot+4125a3c514e3436a02e6@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+4125a3c514e3436a02e6@syzkaller.appspotmail.com
Fixes: f8f1ed1ab3 ("xfs: return a referenced perag from filestreams allocator")
Cc: <stable@vger.kernel.org> # v6.3
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_reclaim_inodes_count iterates over all AGs to sum up the reclaimable
inodes counts. There is no point in grabbing a reference to the them or
unlock the RCU critical section for each iteration, so switch to the
more efficient xas_for_each_marked iterator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Pass the old perag structure to the tagged loop helpers so that they can
grab the old agno before releasing the reference. This removes the need
to separately track the agno and the iterator macro, and thus also
obsoletes the for_each_perag_tag syntactic sugar.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This patch introduces two more new ioctls to manage atomic updates to
file contents -- XFS_IOC_START_COMMIT and XFS_IOC_COMMIT_RANGE. The
commit mechanism here is exactly the same as what XFS_IOC_EXCHANGE_RANGE
does, but with the additional requirement that file2 cannot have changed
since some sampling point. The start-commit ioctl performs the sampling
of file attributes.
Note: This patch currently samples i_ctime during START_COMMIT and
checks that it hasn't changed during COMMIT_RANGE. This isn't entirely
safe in kernels prior to 6.12 because ctime only had coarse grained
granularity and very fast updates could collide with a COMMIT_RANGE.
With the multi-granularity ctime introduced by Jeff Layton, it's now
possible to update ctime such that this does not happen.
It is critical, then, that this patch must not be backported to any
kernel that does not support fine-grained file change timestamps.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Since file_path() takes the output buffer as one of its arguments, we
might as well have it format directly into the tracepoint's char array
instead of wasting stack space.
Fixes: 3934e8ebb7 ("xfs: create a big array data structure")
Fixes: 5076a6040c ("xfs: support in-memory buffer cache targets")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403290419.HPcyvqZu-lkp@intel.com/
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The grant heads in the log track the space reserved in the log for
running transactions. They do this by tracking how far ahead of the
tail that the reservation has reached, and the units for doing this
are {cycle,bytes} for the reserve head rather than {cycle,blocks}
which are normal used by LSNs.
This is annoyingly complex because we have to split, crack and
combined these tuples for any calculation we do to determine log
space and targets. This is computationally expensive as well as
difficult to do atomically and locklessly, as well as limiting the
size of the log to 2^32 bytes.
Really, though, all the grant heads are tracking is how much space
is currently available for use in the log. We can track this as a
simply byte count - we just don't care what the actual physical
location in the log the head and tail are at, just how much space we
have remaining before the head and tail overlap.
So, convert the grant heads to track the byte reservations that are
active rather than the current (cycle, offset) tuples. This means an
empty log has zero bytes consumed, and a full log is when the
reservations reach the size of the log minus the space consumed by
the AIL.
This greatly simplifies the accounting and checks for whether there
is space available. We no longer need to crack or combine LSNs to
determine how much space the log has left, nor do we need to look at
the head or tail of the log to determine how close to full we are.
There is, however, a complexity that needs to be handled. We know
how much space is being tracked in the AIL now via log->l_tail_space
and the log tickets track active reservations and return the unused
portions to the grant heads when ungranted. Unfortunately, we don't
track the used portion of the grant, so when we transfer log items
from the CIL to the AIL, the space accounted to the grant heads is
transferred to the log tail space. Hence when we move the AIL head
forwards on item insert, we have to remove that space from the grant
heads.
We also remove the xlog_verify_grant_tail() debug function as it is
no longer useful. The check it performs has been racy since delayed
logging was introduced, but now it is clearly only detecting false
positives so remove it.
The result of this substantially simpler accounting algorithm is an
increase in sustained transaction rate from ~1.3 million
transactions/s to ~1.9 million transactions/s with no increase in
CPU usage. We also remove the 32 bit space limitation on the grant
heads, which will allow us to increase the journal size beyond 2GB
in future.
Note that this renames the sysfs files exposing the log grant space
now that the values are exported in bytes. This allows xfstests
to auto-detect the old or new ABI.
[hch: move xlog_grant_sub_space out of line,
update the xlog_grant_{add,sub}_space prototypes,
rename the sysfs files to allow auto-detection in xfstests]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The current implementation of xlog_assign_tail_lsn() assumes that
when the AIL is empty, the log tail matches the LSN of the last
written commit record. This is recorded in xlog_state_set_callback()
as log->l_last_sync_lsn when the iclog state changes to
XLOG_STATE_CALLBACK. This change is then immediately followed by
running the callbacks on the iclog which then insert the log items
into the AIL at the "commit lsn" of that checkpoint.
The AIL tracks log items via the start record LSN of the checkpoint,
not the commit record LSN. This is because we can pipeline multiple
checkpoints, and so the start record of checkpoint N+1 can be
written before the commit record of checkpoint N. i.e:
start N commit N
+-------------+------------+----------------+
start N+1 commit N+1
The tail of the log cannot be moved to the LSN of commit N when all
the items of that checkpoint are written back, because then the
start record for N+1 is no longer in the active portion of the log
and recovery will fail/corrupt the filesystem.
Hence when all the log items in checkpoint N are written back, the
tail of the log most now only move as far forwards as the start LSN
of checkpoint N+1.
Hence we cannot use the maximum start record LSN the AIL sees as a
replacement the pointer to the current head of the on-disk log
records. However, we currently only use the l_last_sync_lsn when the
AIL is empty - when there is no start LSN remaining, the tail of the
log moves to the LSN of the last commit record as this is where
recovery needs to start searching for recoverable records. THe next
checkpoint will have a start record LSN that is higher than
l_last_sync_lsn, and so everything still works correctly when new
checkpoints are written to an otherwise empty log.
l_last_sync_lsn is an atomic variable because it is currently
updated when an iclog with callbacks attached moves to the CALLBACK
state. While we hold the icloglock at this point, we don't hold the
AIL lock. When we assign the log tail, we hold the AIL lock, not the
icloglock because we have to look up the AIL. Hence it is an atomic
variable so it's not bound to a specific lock context.
However, the iclog callbacks are only used for CIL checkpoints. We
don't use callbacks with unmount record writes, so the
l_last_sync_lsn variable only gets updated when we are processing
CIL checkpoint callbacks. And those callbacks run under AIL lock
contexts, not icloglock context. The CIL checkpoint already knows
what the LSN of the iclog the commit record was written to (obtained
when written into the iclog before submission) and so we can update
the l_last_sync_lsn under the AIL lock in this callback. No other
iclog callbacks will run until the currently executing one
completes, and hence we can update the l_last_sync_lsn under the AIL
lock safely.
This means l_last_sync_lsn can move to the AIL as the "ail_head_lsn"
and it can be used to replace the atomic l_last_sync_lsn in the
iclog code. This makes tracking the log tail belong entirely to the
AIL, rather than being smeared across log, iclog and AIL state and
locking.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Pass the incore refcount intent structure to the tracepoints instead of
open-coding the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Prepare the rest of refcount btree tracepoints for use with realtime
reflink by making them take the btree cursor object as a parameter.
This will save us a lot of trouble later on.
Remove the xfs_refcount_recover_extent tracepoint since it's already
covered by other refcount tracepoints.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only user of the "ag" tracepoint event classes is the refcount
btree, so rename them to make that obvious and make them take the btree
cursor to simplify the arguments. This will save us a lot of trouble
later on.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert all the refcount tracepoints to use the btree error tracepoint
class.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass the incore rmap structure to the tracepoints instead of open-coding
the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Prepare the rmap btree tracepoints for use with realtime rmap btrees by
making them take the btree cursor object as a parameter. This will save
us a lot of trouble later on.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new tracepoint class for btree-related errors, then convert all
the rmap tracepoints to use it. Also fix the one tracepoint that was
abusing the old class by making it a separate tracepoint.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass the incore EFI structure to the tracepoints instead of open-coding
the argument passing. This cleans up the call sites a bit.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Implement FITRIM for the realtime device by pretending that it's
"space" immediately after the data device. We have to hold the
rtbitmap ILOCK while the discard operations are ongoing because there's
no busy extent tracking for the rt volume to prevent reallocations.
Cc: Konst Mayer <cdlscpmv@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
This patch adds a pair of new file ioctls to retrieve the parent pointer
of a given inode. They both return the same results, but one operates
on the file descriptor passed to ioctl() whereas the other allows the
caller to specify a file handle for which the caller wants results.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add the new parent attribute type. XFS_ATTR_PARENT is used only for parent pointer
entries; it uses reserved blocks like XFS_ATTR_ROOT.
Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This field only ever contains XATTR_{CREATE,REPLACE}, and it only goes
as deep as xfs_attr_set. Remove the field from the structure and
replace it with an enum specifying exactly what kind of change we want
to make to the xattr structure. Upsert is the name that we'll give to
the flags==0 operation, because we're either updating an existing value
or inserting it, and the caller doesn't care.
Note: The "UPSERTR" name created here is to make userspace porting
easier. It will be removed in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_mod_freecounter has two entirely separate code paths for adding or
subtracting from the free counters. Only the subtract case looks at the
rsvd flag and can return an error.
Split xfs_mod_freecounter into separate helpers for subtracting or
adding the freecounter, and remove all the impossible to reach error
handling for the addition case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
If the extended attributes look bad, try to sift through the rubble to
find whatever keys/values we can, stage a new attribute structure in a
temporary file and use the atomic extent swapping mechanism to commit
the results in bulk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add an explicit owner field to xfs_da_args, which will make it easier
for online fsck to set the owner field of the temporary directory and
xattr structures that it builds to repair damaged metadata.
Note: I hopefully found all the xfs_da_args definitions by looking for
automatic stack variable declarations and xfs_da_args.dp assignments:
git grep -E '(args.*dp =|struct xfs_da_args[[:space:]]*[a-z0-9][a-z0-9]*)'
Note that callers of xfs_attr_{get,set,change} can set the owner to zero
(or leave it unset) to have the default set to args->dp.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a new file mapping exchange flag that enables us to perform
post-exchange processing on file2 once we're done exchanging the extent
mappings. If we were swapping mappings between extended attribute
forks, we want to be able to convert file2's attr fork from block to
inline format.
(This implies that all fork contents are exchanged.)
This isn't used anywhere right now, but we need to have the basic ondisk
flags in place so that a future online xattr repair feature can create
salvaged attrs in a temporary file and exchange the attr fork mappings
when ready. If one file is in extents format and the other is inline,
we will have to promote both to extents format to perform the exchange.
After the exchange, we can try to condense the fixed file's attr fork
back down to inline format if possible.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
So far, we've constructed the front end of the file range exchange code
that does all the checking; and the back end of the file mapping
exchange code that actually does the work. Glue these two pieces
together so that we can turn on the functionality.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've created the skeleton of a log intent item to track and
restart file mapping exchange operations, add the upper level logic to
commit intent items and turn them into concrete work recorded in the
log. This builds on the existing bmap update intent items that have
been around for a while now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix some inconsistencies in the xmbuf tracepoints -- they should be
reporting the major/minor of the filesystem that they're associated
with, so that we have some clue on whose behalf the xmbuf was created.
Fix the xmbuf_free tracepoint to report the same.
Don't call the trace function until the xmbuf is fully initialized.
Fixes: 5076a6040c ("xfs: support in-memory buffer cache target")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Extend the bmap update (BUI) log items with a new realtime flag that
indicates that the updates apply against a realtime file's data fork.
We'll wire up the actual code later.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass the incore bmap structure to the tracepoints instead of open-coding
the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We're about to start adding support for deferred log intent items for
realtime extents, so split these four types into separate classes so
that we can customize them as the transition happens.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
As we've noted in various places, all current users of in-memory btrees
are online fsck. Online fsck only stages a btree long enough to rebuild
an ondisk data structure, which means that the in-memory btree is
ephemeral. Furthermore, if we encounter /any/ errors while updating an
in-memory btree, all we do is tear down all the staged data and return
an errno to userspace. In-memory btrees need not be transactional, so
their buffers should not be committed to the ondisk log, nor should they
be checkpointed by the AIL. That's just as well since the ephemeral
nature of the btree means that the buftarg and the buffers may disappear
quickly anyway.
Therefore, we need a way to launder the btree buffers that get attached
to the transaction by the generic btree code. Because the buffers are
directly mapped to backing file pages, there's no need to bwrite them
back to the tmpfs file. All we need to do is clean enough of the buffer
log item state so that the bli can be detached from the buffer, remove
the bli from the transaction's log item list, and reset the transaction
dirty state as if the laundered items had never been there.
For simplicity, create xfbtree transaction commit and cancel helpers
that launder the in-memory btree buffers for callers. Once laundered,
call the write verifier on non-stale buffers to avoid integrity issues,
or punch a hole in the backing file for stale buffers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Adapt the generic btree cursor code to be able to create a btree whose
buffers come from a (presumably in-memory) buftarg with a header block
that's specific to in-memory btrees. We'll connect this to other parts
of online scrub in the next patches.
Note that in-memory btrees always have a block size matching the system
memory page size for efficiency reasons. There are also a few things we
need to do to finalize a btree update; that's covered in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Allow the buffer cache to target in-memory files by making it possible
to have a buftarg that maps pages from private shmem files. As the
prevous patch alludes, the in-memory buftarg contains its own cache,
points to a shmem file, and does not point to a block_device.
The next few patches will make it possible to construct an xfs_btree in
pageable memory by using this buftarg.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The last checks for bc_btnum can be replaced with helpers that check
the btree ops. This allows adding new btrees to XFS without having
to update a global enum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: complete the ops predicates]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The btnum in struct xfs_btree_ops is often used for printing a symbolic
name for the btree. Add a name field to the ops structure and use that
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Using arrays of largely unrelated fields that use the btree number
as index is not very robust. Split the arrays into three separate
fields instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Two of the btree cursor flags are always used together and encode
the fundamental btree type. There currently are two such types:
1) an on-disk AG-rooted btree with 32-bit pointers
2) an on-disk inode-rooted btree with 64-bit pointers
and we're about to add:
3) an in-memory btree with 64-bit pointers
Introduce a new enum and a new type field in struct xfs_btree_geom
to encode this type directly instead of using flags and change most
code to switch on this enum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: make the pointer lengths explicit]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Make the pointer length an explicit field in the btree operations
structure so that the next patch (which introduces an explicit btree
type enum) doesn't have to play a bunch of awkward games with inferring
the pointer length from the enumeration.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Certain btree flags never change for the life of a btree cursor because
they describe the geometry of the btree itself. Encode these in the
btree ops structure and reduce the amount of code required in each btree
type's init_cursor functions. This also frees up most of the bits in
bc_flags.
A previous version of this patch also converted the open-coded flags
logic to helpers. This was removed due to the pending refactoring (that
follows this patch) to eliminate most of the state flags.
Conversion script:
sed \
-e 's/XFS_BTREE_LONG_PTRS/XFS_BTGEO_LONG_PTRS/g' \
-e 's/XFS_BTREE_ROOT_IN_INODE/XFS_BTGEO_ROOT_IN_INODE/g' \
-e 's/XFS_BTREE_LASTREC_UPDATE/XFS_BTGEO_LASTREC_UPDATE/g' \
-e 's/XFS_BTREE_OVERLAPPING/XFS_BTGEO_OVERLAPPING/g' \
-e 's/cur->bc_flags & XFS_BTGEO_/cur->bc_ops->geom_flags \& XFS_BTGEO_/g' \
-i $(git ls-files fs/xfs/*.[ch] fs/xfs/libxfs/*.[ch] fs/xfs/scrub/*.[ch])
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't waste tracepoint segment memory on per-btree block allocation
tracepoints when we can do it from the generic btree code.
With this patch applied, two tracepoints are collapsed into one
tracepoint, with the following effects on objdump -hx xfs.ko output:
Before:
10 __tracepoints_ptrs 00000b38 0000000000000000 0000000000000000 001412f0 2**2
14 __tracepoints_strings 00005433 0000000000000000 0000000000000000 001689a0 2**5
29 __tracepoints 00010d30 0000000000000000 0000000000000000 0023fe00 2**5
After:
10 __tracepoints_ptrs 00000b34 0000000000000000 0000000000000000 001417b0 2**2
14 __tracepoints_strings 00005413 0000000000000000 0000000000000000 00168e80 2**5
29 __tracepoints 00010cd0 0000000000000000 0000000000000000 00240760 2**5
Column 3 is the section size in bytes; removing these two tracepoints
reduces the size of the ELF segments by 132 bytes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't waste memory on extra per-btree block freeing tracepoints when we
can do it from the generic btree code.
With this patch applied, two tracepoints are collapsed into one
tracepoint, with the following effects on objdump -hx xfs.ko output:
Before:
10 __tracepoints_ptrs 00000b3c 0000000000000000 0000000000000000 00140eb0 2**2
14 __tracepoints_strings 00005453 0000000000000000 0000000000000000 00168540 2**5
29 __tracepoints 00010d90 0000000000000000 0000000000000000 0023f5e0 2**5
After:
10 __tracepoints_ptrs 00000b38 0000000000000000 0000000000000000 001412f0 2**2
14 __tracepoints_strings 00005433 0000000000000000 0000000000000000 001689a0 2**5
29 __tracepoints 00010d30 0000000000000000 0000000000000000 0023fe00 2**5
Column 3 is the section size in bytes; removing these two tracepoints
reduces the size of the ELF segments by 132 bytes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If an unhealthy inode gets inactivated, remember this fact in the
per-fs health summary.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Split the setting of the sick and checked masks into separate functions
as part of preparing to add the ability for regular runtime fs code
(i.e. not scrub) to mark metadata structures sick when corruptions are
found. Improve the documentation of libxfs' requirements for helper
behavior.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
kmem_alloc() is just a thin wrapper around kmalloc() these days.
Convert everything to use kmalloc() so we can get rid of the
wrapper.
Note: the transaction region allocation in xlog_add_to_transaction()
can be a high order allocation. Converting it to use
kmalloc(__GFP_NOFAIL) results in warnings in the page allocation
code being triggered because the mm subsystem does not want us to
use __GFP_NOFAIL with high order allocations like we've been doing
with the kmem_alloc() wrapper for a couple of decades. Hence this
specific case gets converted to xlog_kvmalloc() rather than
kmalloc() to avoid this issue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Instead of tracing the address of the recovery handler, use the name
in the defer op, similar to other defer ops related tracepoints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The dfp_type field in struct xfs_defer_pending is only used to either
look up the operations associated with the pending word or in trace
points. Replace it with a direct pointer to the operations vector,
and store a pretty name in the vector for tracing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Consolidate the xfs_attr_defer_* helpers into a single xfs_attr_defer_add
one that picks the right dela_state based on the passed in operation.
Also move to a single trace point as the actual operation is visible
through the flags in the delta_state passed to the trace point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Traditionally, all pending deferred work attached to a transaction is
finished when one of the xfs_defer_finish* functions is called.
However, online repair wants to be able to allocate space for a new data
structure, format a new metadata structure into the allocated space, and
commit that into the filesystem.
As a hedge against system crashes during repairs, we also want to log
some EFI items for the allocated space speculatively, and cancel them if
we elect to commit the new data structure.
Therefore, introduce the idea of pausing a pending deferred work item.
Log intent items are still created for paused items and relogged as
necessary. However, paused items are pushed onto a side list before we
start calling ->finish_item, and the whole list is reattach to the
transaction afterwards. New work items are never attached to paused
pending items.
Modify xfs_defer_cancel to clean up pending deferred work items holding
a log intent item but not a log intent done item, since that is now
possible.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The previous patch to reload unrecovered unlinked inodes when adding a
newly created inode to the unlinked list is missing a key piece of
functionality. It doesn't handle the case that someone calls xfs_iget
on an inode that is not the last item in the incore list. For example,
if at mount time the ondisk iunlink bucket looks like this:
AGI -> 7 -> 22 -> 3 -> NULL
None of these three inodes are cached in memory. Now let's say that
someone tries to open inode 3 by handle. We need to walk the list to
make sure that inodes 7 and 22 get loaded cold, and that the
i_prev_unlinked of inode 3 gets set to 22.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
shrikanth hegde reports that filesystems fail shortly after mount with
the following failure:
WARNING: CPU: 56 PID: 12450 at fs/xfs/xfs_inode.c:1839 xfs_iunlink_lookup+0x58/0x80 [xfs]
This of course is the WARN_ON_ONCE in xfs_iunlink_lookup:
ip = radix_tree_lookup(&pag->pag_ici_root, agino);
if (WARN_ON_ONCE(!ip || !ip->i_ino)) { ... }
From diagnostic data collected by the bug reporters, it would appear
that we cleanly mounted a filesystem that contained unlinked inodes.
Unlinked inodes are only processed as a final step of log recovery,
which means that clean mounts do not process the unlinked list at all.
Prior to the introduction of the incore unlinked lists, this wasn't a
problem because the unlink code would (very expensively) traverse the
entire ondisk metadata iunlink chain to keep things up to date.
However, the incore unlinked list code complains when it realizes that
it is out of sync with the ondisk metadata and shuts down the fs, which
is bad.
Ritesh proposed to solve this problem by unconditionally parsing the
unlinked lists at mount time, but this imposes a mount time cost for
every filesystem to catch something that should be very infrequent.
Instead, let's target the places where we can encounter a next_unlinked
pointer that refers to an inode that is not in cache, and load it into
cache.
Note: This patch does not address the problem of iget loading an inode
from the middle of the iunlink list and needing to set i_prev_unlinked
correctly.
Reported-by: shrikanth hegde <sshegde@linux.vnet.ibm.com>
Triaged-by: Ritesh Harjani <ritesh.list@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
* Chandan Babu will be taking over as the XFS release manager. He has
reviewed all the patches that are in this branch, though I'm signing
the branch one last time since I'm still technically maintainer. :P
* Create a maintainer entry profile for XFS in which we lay out the
various roles that I have played for many years. Aside from release
manager, the remaining roles are as yet unfilled.
* Start merging online repair -- we now have in-memory pageable memory
for staging btrees, a bunch of pending fixes, and we've started the
process of refactoring the scrub support code to support more of
repair. In particular, reaping of old blocks from damaged structures.
* Scrub the realtime summary file.
* Fix a bug where scrub's quota iteration only ever returned the root
dquot. Oooops.
* Fix some typos.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZOQE2AAKCRBKO3ySh0YR
pvmZAQDe+KceaVx6Dv2f9ihckeS2dILSpDTo1bh9BeXnt005VwD/ceHTaJxEl8lp
u/dixFDkRgp9RYtoTAK2WNiUxYetsAc=
=oZN6
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.6-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Chandan Babu:
- Chandan Babu will be taking over as the XFS release manager. He has
reviewed all the patches that are in this branch, though I'm signing
the branch one last time since I'm still technically maintainer. :P
- Create a maintainer entry profile for XFS in which we lay out the
various roles that I have played for many years. Aside from release
manager, the remaining roles are as yet unfilled.
- Start merging online repair -- we now have in-memory pageable memory
for staging btrees, a bunch of pending fixes, and we've started the
process of refactoring the scrub support code to support more of
repair. In particular, reaping of old blocks from damaged structures.
- Scrub the realtime summary file.
- Fix a bug where scrub's quota iteration only ever returned the root
dquot. Oooops.
- Fix some typos.
[ Pull request from Chandan Babu, but signed tag and description from
Darrick Wong, thus the first person singular above is Darrick, not
Chandan ]
* tag 'xfs-6.6-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (37 commits)
fs/xfs: Fix typos in comments
xfs: fix dqiterate thinko
xfs: don't check reflink iflag state when checking cow fork
xfs: simplify returns in xchk_bmap
xfs: rewrite xchk_inode_is_allocated to work properly
xfs: hide xfs_inode_is_allocated in scrub common code
xfs: fix agf_fllast when repairing an empty AGFL
xfs: allow userspace to rebuild metadata structures
xfs: clear pagf_agflreset when repairing the AGFL
xfs: allow the user to cancel repairs before we start writing
xfs: don't complain about unfixed metadata when repairs were injected
xfs: implement online scrubbing of rtsummary info
xfs: always rescan allegedly healthy per-ag metadata after repair
xfs: move the realtime summary file scrubber to a separate source file
xfs: wrap ilock/iunlock operations on sc->ip
xfs: get our own reference to inodes that we want to scrub
xfs: track usage statistics of online fsck
xfs: improve xfarray quicksort pivot
xfs: create scaffolding for creating debugfs entries
xfs: cache pages used for xfarray quicksort convergence
...
Remove the unnecessary encoding of page order into an enum and pass the
page order directly. That lets us get rid of pe_order().
The switch constructs have to be changed to if/else constructs to prevent
GCC from warning on builds with 3-level page tables where PMD_ORDER and
PUD_ORDER have the same value.
If you are looking at this commit because your driver stopped compiling,
look at the previous commit as well and audit your driver to be sure it
doesn't depend on mmap_lock being held in its ->huge_fault method.
[willy@infradead.org: use "order %u" to match the (non dev_t) style]
Link: https://lkml.kernel.org/r/ZOUYekbtTv+n8hYf@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Finish the realtime summary scrubber by adding the functions we need to
compute a fresh copy of the rtsummary info and comparing it to the copy
on disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
* Fix some ordering problems with log items during log recovery.
* Don't deadlock the system by trying to flush busy freed extents while
holding on to busy freed extents.
* Improve validation of log geometry parameters when reading the
primary superblock.
* Validate the length field in the AGF header.
* Fix recordset filtering bugs when re-calling GETFSMAP to return more
results when the resultset didn't previously fit in the caller's buffer.
* Fix integer overflows in GETFSMAP when working with rt volumes larger
than 2^32 fsblocks.
* Fix GETFSMAP reporting the undefined space beyond the last rtextent.
* Fix filtering bugs in GETFSMAP's log device backend if the log ever
becomes longer than 2^32 fsblocks.
* Improve validation of file offsets in the GETFSMAP range parameters.
* Fix an off by one bug in the pmem media failure notification
computation.
* Validate the length field in the AGI header too.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZKL9IwAKCRBKO3ySh0YR
prFLAQC+dp1bV5ShBPfYJMCSUS7gmZEge01QrLTqcpyu8mO5GgD/YLUdD2Iebc8t
AS1Awj1iec7AFtCWcd3bTeNZD7vL9w0=
=j/oi
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.5-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
- Fix some ordering problems with log items during log recovery
- Don't deadlock the system by trying to flush busy freed extents while
holding on to busy freed extents
- Improve validation of log geometry parameters when reading the
primary superblock
- Validate the length field in the AGF header
- Fix recordset filtering bugs when re-calling GETFSMAP to return more
results when the resultset didn't previously fit in the caller's
buffer
- Fix integer overflows in GETFSMAP when working with rt volumes larger
than 2^32 fsblocks
- Fix GETFSMAP reporting the undefined space beyond the last rtextent
- Fix filtering bugs in GETFSMAP's log device backend if the log ever
becomes longer than 2^32 fsblocks
- Improve validation of file offsets in the GETFSMAP range parameters
- Fix an off by one bug in the pmem media failure notification
computation
- Validate the length field in the AGI header too
* tag 'xfs-6.5-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Remove unneeded semicolon
xfs: AGI length should be bounds checked
xfs: fix the calculation for "end" and "length"
xfs: fix xfs_btree_query_range callers to initialize btree rec fully
xfs: validate fsmap offsets specified in the query keys
xfs: fix logdev fsmap query result filtering
xfs: clean up the rtbitmap fsmap backend
xfs: fix getfsmap reporting past the last rt extent
xfs: fix integer overflows in the fsmap rtbitmap and logdev backends
xfs: fix interval filtering in multi-step fsmap queries
xfs: fix bounds check in xfs_defer_agfl_block()
xfs: AGF length has never been bounds checked
xfs: journal geometry is not properly bounds checked
xfs: don't block in busy flushing when freeing extents
xfs: allow extent free intents to be retried
xfs: pass alloc flags through to xfs_extent_busy_flush()
xfs: use deferred frees for btree block freeing
xfs: don't reverse order of items in bulk AIL insertion
xfs: remove redundant initializations of pointers drop_leaf and save_leaf
The rtbitmap fsmap backend doesn't query the rmapbt, so it's wasteful to
spend time initializing the rmap_irec objects. Worse yet, the logic to
query the rtbitmap is spread across three separate functions, which is
unnecessarily difficult to follow.
Compute the start rtextent that we want from keys[0] directly and
combine the functions to avoid passing parameters around everywhere, and
consolidate all the logic into a single function. At one point many
years ago I intended to use __xfs_getfsmap_rtdev as the launching point
for realtime rmapbt queries, but this hasn't been the case for a long
time.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Provide a splice_read wrapper for XFS. This does a stat count and a
shutdown check before proceeding, then emits a new trace line and locks the
inode across the call to filemap_splice_read() and adds to the stats
afterwards. Splicing from direct I/O or DAX is handled by the caller.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Darrick J. Wong <djwong@kernel.org>
cc: linux-xfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-25-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a writer thread executes a chain of log intent items, the AG header
buffer locks will cycle during a transaction roll to get from one intent
item to the next in a chain. Although scrub takes all AG header buffer
locks, this isn't sufficient to guard against scrub checking an AG while
that writer thread is in the middle of finishing a chain because there's
no higher level locking primitive guarding allocation groups.
When there's a collision, cross-referencing between data structures
(e.g. rmapbt and refcountbt) yields false corruption events; if repair
is running, this results in incorrect repairs, which is catastrophic.
Fix this by adding to the perag structure the count of active intents
and make scrub wait until it has both AG header buffer locks and the
intent counter reaches zero.
One quirk of the drain code is that deferred bmap updates also bump and
drop the intent counter. A fundamental decision made during the design
phase of the reverse mapping feature is that updates to the rmapbt
records are always made by the same code that updates the primary
metadata. In other words, callers of bmapi functions expect that the
bmapi functions will queue deferred rmap updates.
Some parts of the reflink code queue deferred refcount (CUI) and bmap
(BUI) updates in the same head transaction, but the deferred work
manager completely finishes the CUI before the BUI work is started. As
a result, the CUI drops the intent count long before the deferred rmap
(RUI) update even has a chance to bump the intent count. The only way
to keep the intent count elevated between the CUI and RUI is for the BUI
to bump the counter until the RUI has been created.
A second quirk of the intent drain code is that deferred work items must
increment the intent counter as soon as the work item is added to the
transaction. When a BUI completes and queues an RUI, the RUI must
increment the counter before the BUI decrements it. The only way to
accomplish this is to require that the counter be bumped as soon as the
deferred work item is created in memory.
In the next patches we'll improve on this facility, but this patch
provides the basic functionality.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There are a few places in the XFS codebase where a caller has either an
active or a passive reference to a perag structure and wants to give
a passive reference to some other piece of code. Btree cursor creation
and inode walks are good examples of this. Replace the open-coded logic
with a helper to do this.
The new function adds a few safeguards -- it checks that there's at
least one reference to the perag structure passed in, and it records the
refcount bump in the ftrace information. This makes it much easier to
debug perag refcounting problems.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There are now five separate space allocator interfaces exposed to the
rest of XFS for five different strategies to find space. Add
tracepoints for each of them so that I can tell from a trace dump
exactly which ones got called and what happened underneath them. Add a
sixth so it's more obvious if an allocation actually happened.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that the filestreams allocator is largely rewritten,
restructure the main entry point and pick function to seperate out
the different operations cleanly. The MRU lookup function should not
handle the start AG selection on MRU lookup failure, and nor should
the pick function handle building the association that is inserted
into the MRU.
This leaves the filestreams allocator fairly clean and easy to
understand, returning to the caller with an active perag reference
and a target block to allocate at.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Pass perags instead of raw ag numbers, avoiding the need for the
special peek function for the tracing code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
We don't need the multiplexing xfs_alloc_ag_vextent() provided
anymore - we can just call the exact/near/size variants directly.
This allows us to remove args->type completely and stop using
args->fsbno as an input to the allocator algorithms.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
So that they all output the same information in the traces to make
debugging refcount issues easier.
This means that all the lookup/drop functions no longer need to use
the full memory barrier atomic operations (atomic*_return()) so
will have less overhead when tracing is off. The set/clear tag
tracepoints no longer abuse the reference count to pass the tag -
the tag being cleared is obvious from the _RET_IP_ that is recorded
in the trace point.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
We need to be able to dynamically remove instantiated AGs from
memory safely, either for shrinking the filesystem or paging AG
state in and out of memory (e.g. supporting millions of AGs). This
means we need to be able to safely exclude operations from accessing
perags while dynamic removal is in progress.
To do this, introduce the concept of active and passive references.
Active references are required for high level operations that make
use of an AG for a given operation (e.g. allocation) and pin the
perag in memory for the duration of the operation that is operating
on the perag (e.g. transaction scope). This means we can fail to get
an active reference to an AG, hence callers of the new active
reference API must be able to handle lookup failure gracefully.
Passive references are used in low level code, where we might need
to access the perag structure for the purposes of completing high
level operations. For example, buffers need to use passive
references because:
- we need to be able to do metadata IO during operations like grow
and shrink transactions where high level active references to the
AG have already been blocked
- buffers need to pin the perag until they are reclaimed from
memory, something that high level code has no direct control over.
- unused cached buffers should not prevent a shrink from being
started.
Hence we have active references that will form exclusion barriers
for operations to be performed on an AG, and passive references that
will prevent reclaim of the perag until all objects with passive
references have been reclaimed themselves.
This patch introduce xfs_perag_grab()/xfs_perag_rele() as the API
for active AG reference functionality. We also need to convert the
for_each_perag*() iterators to use active references, which will
start the process of converting high level code over to using active
references. Conversion of non-iterator based code to active
references will be done in followup patches.
Note that the implementation using reference counting is really just
a development vehicle for the API to ensure we don't have any leaks
in the callers. Once we need to remove perag structures from memory
dyanmically, we will need a much more robust per-ag state transition
mechanism for preventing new references from being taken while we
wait for existing references to drain before removal from memory can
occur....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The tp->t_firstblock field is now raelly tracking the highest AG we
have locked, not the block number of the highest allocation we've
made. It's purpose is to prevent AGF locking deadlocks, so rename it
to "highest AG" and simplify the implementation to just track the
agno rather than a fsbno.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
I've recently encountered an ABBA deadlock with g/476. The upcoming
changes seem to make this much easier to hit, but the underlying
problem is a pre-existing one.
Essentially, if we select an AG for allocation, then lock the AGF
and then fail to allocate for some reason (e.g. minimum length
requirements cannot be satisfied), then we drop out of the
allocation with the AGF still locked.
The caller then modifies the allocation constraints - usually
loosening them up - and tries again. This can result in trying to
access AGFs that are lower than the AGF we already have locked from
the failed attempt. e.g. the failed attempt skipped several AGs
before failing, so we have locks an AG higher than the start AG.
Retrying the allocation from the start AG then causes us to violate
AGF lock ordering and this can lead to deadlocks.
The deadlock exists even if allocation succeeds - we can do a
followup allocations in the same transaction for BMBT blocks that
aren't guaranteed to be in the same AG as the original, and can move
into higher AGs. Hence we really need to move the tp->t_firstblock
tracking down into xfs_alloc_vextent() where it can be set when we
exit with a locked AG.
xfs_alloc_vextent() can also check there if the requested
allocation falls within the allow range of AGs set by
tp->t_firstblock. If we can't allocate within the range set, we have
to fail the allocation. If we are allowed to to non-blocking AGF
locking, we can ignore the AG locking order limitations as we can
use try-locks for the first iteration over requested AG range.
This invalidates a set of post allocation asserts that check that
the allocation is always above tp->t_firstblock if it is set.
Because we can use try-locks to avoid the deadlock in some
circumstances, having a pre-existing locked AGF doesn't always
prevent allocation from lower order AGFs. Hence those ASSERTs need
to be removed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Pass the incore refcount intent through the CUI logging code instead of
repeatedly boxing and unboxing parameters.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add a new error injection knob so that we can arbitrarily slow down
pagecache writes to test for race conditions and aberrant reclaim
behavior if the writeback mechanisms are slow to issue writeback. This
will enable functional testing for the ifork sequence counters
introduced in commit 304a68b9c6 ("xfs: use iomap_valid method to
detect stale cached iomaps") that fixes write racing with reclaim
writeback.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a new error injection knob so that we can arbitrarily slow down
writeback to test for race conditions and aberrant reclaim behavior if
the writeback mechanisms are slow to issue writeback. This will enable
functional testing for the ifork sequence counters introduced in commit
745b3f76d1 ("xfs: maintain a sequence count for inode fork
manipulations").
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we've broken out the startblock and shared/cow domain in the
incore refcount extent record structure, update the tracepoints to
report the domain.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add space between arguments would help someone
to locate the key words they want, so break
quoted strings at a space character.
Such as below:
[Before]
kworker/1:0-280 [001] ..... 600.782135: xfs_bunmap:
dev 7:0 ino 0x85 disize 0x0 fileoff 0x0 fsbcount 0x400000001fffffflags ATTRFORK ...
[After]
kworker/1:2-564 [001] ..... 23817.906160: xfs_bunmap:
dev 7:0 ino 0x85 disize 0x0 fileoff 0x0 fsbcount 0x400000001fffff flags ATTRFORK ...
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This series fixes a use-after-free bug that syzbot uncovered. The UAF
itself is a result of a race condition between getxattr and removexattr
because callers to getxattr do not necessarily take any sort of locks
before calling into the filesystem.
Although the race condition itself can be fixed through clever use of a
memory barrier, further consideration of the use cases of extended
attributes shows that most files always have at least one attribute, so
we might as well make them permanent.
v2: Minor tweaks suggested by Dave, and convert some more macros to
helper functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmLQRsAACgkQ+H93GTRK
tOseOw/+JdSH2MU2xx+XoE5M/fStzGpw0UsoOqDo8kUPKDt3z12NwuczlL4OAiuw
XFrN/1IAnxBsTD9YxFYbqoCPNi/VR81ajfWV7JqD2B1Joj0aATsxGDdNUYJnxCdU
HMlMqP5o77XvArwkxFbgxYi7UGdAeNwXxqUJcJ8FopQo2lb8+SG6XzpLgGKnyrKT
FRNKXNObplhtzOs/Bv8qYAxJulmmjkktFJXhK2OAUJlIDjFwFY9Wo2T4QuOVe9w+
NXFOYyu0BqWLpDZQkYKWoCnF0GNsUavS8DP6zZYW3qJ6mX/f1jmtfbOLAkHNhlh8
uHy/3k3SeQhKztTqM28sPioe6mdj2xocorDCCVBgGXgWxVF6aWeM/PS4tMTWN/Bg
TWd1egERpeVC0Ymkm0LTCIDNuLqxsknK1G6sxXhwrQ8cw/70Gl08ePwgdyZ6hpD9
Q61iJQofcI7MJX189a2VSbbHRzFnZIA+uVK4oyhmdEkQVKTHgmzwHVP660oAv9bD
Y5hqkWEoyKTaaCsOWRAPVXG3k03lq+TNcaGggZgwFx11Gw4oMEx5hMUztoP54xX4
aEXb1HWcCmMxy8llnFY/82baW98ucwl8FwWF1qhNIPT40mYx9IobDmvkCtNrAoOC
41U7O8CxxPlt7XKxoRhafQOAhzp0ZzuhCdbaFIUENV7pTAJtq5Q=
=W3Ad
-----END PGP SIGNATURE-----
Merge tag 'make-attr-fork-permanent-5.20_2022-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.20-mergeB
xfs: make attr forks permanent
This series fixes a use-after-free bug that syzbot uncovered. The UAF
itself is a result of a race condition between getxattr and removexattr
because callers to getxattr do not necessarily take any sort of locks
before calling into the filesystem.
Although the race condition itself can be fixed through clever use of a
memory barrier, further consideration of the use cases of extended
attributes shows that most files always have at least one attribute, so
we might as well make them permanent.
v2: Minor tweaks suggested by Dave, and convert some more macros to
helper functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
* tag 'make-attr-fork-permanent-5.20_2022-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: replace inode fork size macros with functions
xfs: replace XFS_IFORK_Q with a proper predicate function
xfs: use XFS_IFORK_Q to determine the presence of an xattr fork
xfs: make inode attribute forks a permanent part of struct xfs_inode
xfs: convert XFS_IFORK_PTR to a static inline helper
When an inode is on an unlinked list during normal operation, it is
guaranteed to be pinned in memory as it is either referenced by the
current unlink operation or it has a open file descriptor that
references it and has it pinned in memory. Hence to look up an inode
on the unlinked list, we can do a direct inode cache lookup and
always expect the lookup to succeed.
Add a function to do this lookup based on the agino that we use to
link the chain of unlinked inodes together so we can begin the
conversion the unlinked list manipulations to use in-memory inodes
rather than inode cluster buffers and remove the backref cache.
Use this lookup function to replace the on-disk inode buffer walk
when removing inodes from the unlinked list with an in-core inode
unlinked list walk.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Replace the shouty macros here with typechecked helper functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The current blocking mechanism for pushing the inodegc queue out to
disk can result in systems becoming unusable when there is a long
running inodegc operation. This is because the statfs()
implementation currently issues a blocking flush of the inodegc
queue and a significant number of common system utilities will call
statfs() to discover something about the underlying filesystem.
This can result in userspace operations getting stuck on inodegc
progress, and when trying to remove a heavily reflinked file on slow
storage with a full journal, this can result in delays measuring in
hours.
Avoid this problem by adding "push" function that expedites the
flushing of the inodegc queue, but doesn't wait for it to complete.
Convert xfs_fs_statfs() and xfs_qm_scall_getquota() to use this
mechanism so they don't block but still ensure that queued
operations are expedited.
Fixes: ab23a77687 ("xfs: per-cpu deferred inode inactivation queues")
Reported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[djwong: fix _getquota_next to use _inodegc_push too]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We can't use the same algorithm for replacing an existing attribute
when logging attributes. The existing algorithm is essentially:
1. create new attr w/ INCOMPLETE
2. atomically flip INCOMPLETE flags between old + new attribute
3. remove old attr which is marked w/ INCOMPLETE
This algorithm guarantees that we see either the old or new
attribute, and if we fail after the atomic flag flip, we don't have
to recover the removal of the old attr because we never see
INCOMPLETE attributes in lookups.
For logged attributes, however, this does not work. The logged
attribute intents do not track the work that has been done as the
transaction rolls, and hence the only recovery mechanism we have is
"run the replace operation from scratch".
This is further exacerbated by the attempt to avoid needing the
INCOMPLETE flag to create an atomic swap. This means we can create
a second active attribute of the same name before we remove the
original. If we fail at any point after the create but before the
removal has completed, we end up with duplicate attributes in
the attr btree and recovery only tries to replace one of them.
There are several other failure modes where we can leave partially
allocated remote attributes that expose stale data, partially free
remote attributes that enable UAF based stale data exposure, etc.
TO fix this, we need a different algorithm for replace operations
when LARP is enabled. Luckily, it's not that complex if we take the
right first step. That is, the first thing we log is the attri
intent with the new name/value pair and mark the old attr as
INCOMPLETE in the same transaction.
From there, we then remove the old attr and keep relogging the
new name/value in the intent, such that we always know that we have
to create the new attr in recovery. Once the old attr is removed,
we then run a normal ATTR_CREATE operation relogging the intent as
we go. If the new attr is local, then it gets created in a single
atomic transaction that also logs the final intent done. If the new
attr is remote, the we set INCOMPLETE on the new attr while we
allocate and set the remote value, and then we clear the INCOMPLETE
flag at in the last transaction taht logs the final intent done.
If we fail at any point in this algorithm, log recovery will always
see the same state on disk: the new name/value in the intent, and
either an INCOMPLETE attr or no attr in the attr btree. If we find
an INCOMPLETE attr, we run the full replace starting with removing
the INCOMPLETE attr. If we don't find it, then we simply create the
new attr.
Notably, recovery of a failed create that has an INCOMPLETE flag set
is now the same - we start with the lookup of the INCOMPLETE attr,
and if that exists then we do the full replace recovery process,
otherwise we just create the new attr.
Hence changing the way we do the replace operation when LARP is
enabled allows us to use the same log recovery algorithm for both
the ATTR_CREATE and ATTR_REPLACE operations. This is also the same
algorithm we use for runtime ATTR_REPLACE operations (except for the
step setting up the initial conditions).
The result is that:
- ATTR_CREATE uses the same algorithm regardless of whether LARP is
enabled or not
- ATTR_REPLACE with larp=0 is identical to the old algorithm
- ATTR_REPLACE with larp=1 runs an unmodified attr removal algorithm
from the larp=0 code and then runs the unmodified ATTR_CREATE
code.
- log recovery when larp=1 runs the same ATTR_REPLACE algorithm as
it uses at runtime.
Because the state machine is now quite clean, changing the algorithm
is really just a case of changing the initial state and how the
states link together for the ATTR_REPLACE case. Hence it's not a
huge amount of code for what is a fairly substantial rework
of the attr logging and recovery algorithm....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We need to merge the add and remove code paths to enable safe
recovery of replace operations. Hoist the initial remove states from
xfs_attr_remove_iter into xfs_attr_set_iter. We will make use of
them in the next patches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Clean up the final leaf/node states in xfs_attr_set_iter() to
further simplify the high level state machine and to set the
completion state correctly. As we are adding a separate state
for node format removal, we need to ensure that node formats
are collapsed back to shortform or empty correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We may not have a remote value for the old xattr we have to remove,
so skip over the remote value removal states and go straight to
the xattr name removal in the leaf/node block.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We can skip the REPLACE state when LARP is enabled, but that means
the XFS_DAS_FLIP_LFLAG state is now poorly named - it indicates
something that has been done rather than what the state is going to
do. Rename it to "REMOVE_OLD" to indicate that we are now going to
perform removal of the old attr.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we set a new xattr, we have three exit paths:
1. nothing else to do
2. allocate and set the remote xattr value
3. perform the rest of a replace operation
Currently we push both 2 and 3 into the same state, regardless of
whether we just set a remote attribute or not. Once we've set the
remote xattr, we have two exit states:
1. nothing else to do
2. perform the rest of a replace operation
Hence we can split the remote xattr allocation and setting into
their own states and factor it out of xfs_attr_set_iter() to further
clean up the state machine and the implementation of the state
machine.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We re-enter the XFS_DAS_FOUND_LBLK state when we have to allocate
multiple extents for a remote xattr. We currently have a flag
called XFS_DAC_LEAF_ADDNAME_INIT to avoid running the remote attr
hole finding code more than once.
However, for the node format tree, we have a separate state for this
so we never reenter the state machine at XFS_DAS_FOUND_NBLK and so
it does not need a special flag to skip over the remote attr hold
finding code.
Convert the leaf block code to use the same state machine as the
node blocks and kill the XFS_DAC_LEAF_ADDNAME_INIT flag.
This further points out that this "ALLOC" state is only traversed
if we have remote xattrs or we are doing a rename operation. Rename
both the leaf and node alloc states to _ALLOC_RMT to indicate they
are iterating to do allocation of remote xattr blocks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We current use XFS_DAS_UNINIT for several steps in the attr_set
state machine. We use it for setting shortform xattrs, converting
from shortform to leaf, leaf add, leaf-to-node and leaf add. All of
these things are essentially known before we start the state machine
iterating, so we really should separate them out:
XFS_DAS_SF_ADD:
- tries to do a shortform add
- on success -> done
- on ENOSPC converts to leaf, -> XFS_DAS_LEAF_ADD
- on error, dies.
XFS_DAS_LEAF_ADD:
- tries to do leaf add
- on success:
- inline attr -> done
- remote xattr || REPLACE -> XFS_DAS_FOUND_LBLK
- on ENOSPC converts to node, -> XFS_DAS_NODE_ADD
- on error, dies
XFS_DAS_NODE_ADD:
- tries to do node add
- on success:
- inline attr -> done
- remote xattr || REPLACE -> XFS_DAS_FOUND_NBLK
- on error, dies
This makes it easier to understand how the state machine starts
up and sets us up on the path to further state machine
simplifications.
This also converts the DAS state tracepoints to use strings rather
than numbers, as converting between enums and numbers requires
manual counting rather than just reading the name.
This also introduces a XFS_DAS_DONE state so that we can trace
successful operation completions easily.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Logged attribute intents only have set and remove types - there is
no separate intent type for a replace operation. We should have a
separate type for a replace operation, as it needs to perform
operations that neither SET or REMOVE can perform.
Add this type to the intent items and rearrange the deferred
operation setup to reflect the different operations we are
performing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson<allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
