Zone file systems reuse the basic RT group enabled XFS file system
structure to support a mode where each RT group is always written from
start to end and then reset for reuse (after moving out any remaining
data). There are few minor but important changes, which are indicated
by a new incompat flag:
1) there are no bitmap and summary inodes, thus the
/rtgroups/{rgno}.{bitmap,summary} metadir files do not exist and the
sb_rbmblocks superblock field must be cleared to zero.
2) there is a new superblock field that specifies the start of an
internal RT section. This allows supporting SMR HDDs that have random
writable space at the beginning which is used for the XFS data device
(which really is the metadata device for this configuration), directly
followed by a RT device on the same block device. While something
similar could be achieved using dm-linear just having a single device
directly consumed by XFS makes handling the file systems a lot easier.
3) Another superblock field that tracks the amount of reserved space (or
overprovisioning) that is never used for user capacity, but allows GC
to run more smoothly.
4) an overlay of the cowextsize field for the rtrmap inode so that we
can persistently track the total amount of rtblocks currently used in
a RT group. There is no data structure other than the rmap that
tracks used space in an RT group, and this counter is used to decide
when a RT group has been entirely emptied, and to select one that
is relatively empty if garbage collection needs to be performed.
While this counter could be tracked entirely in memory and rebuilt
from the rmap at mount time, that would lead to very long mount times
with the large number of RT groups implied by the number of hardware
zones especially on SMR hard drives with 256MB zone sizes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Shortcut dereferencing the xg_block_count field in the generic group
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
They will eventually be needed to be const for zoned growfs, but even
now having such simpler helpers as const as possible is a good thing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Whenever we encounter corrupt realtime refcount btree blocks, we should
report that to the health monitoring system for later reporting.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a library routine to allocate and initialize an empty realtime
refcountbt inode. We'll use this for growfs, mkfs, and repair.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Wire up realtime refcount btree cursors wherever they're needed
throughout the code base.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a metadir path to select the realtime refcount btree inode and load
it at mount time. The rtrefcountbt inode will have a unique extent format
code, which means that we also have to update the inode validation and
flush routines to look for it.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Whenever we encounter corrupt realtime rmap btree blocks, we should
report that to the health monitoring system for later reporting.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a library routine to allocate and initialize an empty realtime
rmapbt inode. We'll use this for mkfs and repair.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Connect the map and unmap reverse-mapping operations to the realtime
rmapbt via the deferred operation callbacks. This enables us to
perform rmap operations against the correct btree.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a metadir path to select the realtime rmap btree inode and load
it at mount time. The rtrmapbt inode will have a unique extent format
code, which means that we also have to update the inode validation and
flush routines to look for it.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper function to turn a metadata file type code into a
printable string, and use this to complain about lockdep problems with
rtgroup inodes. We'll use this more in the next patch.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create some simple helpers to reduce the amount of typing whenever we
access rtgroup inodes. Conversion was done with this spatch and some
minor reformatting:
@@
expression rtg;
@@
- rtg->rtg_inodes[XFS_RTGI_BITMAP]
+ rtg_bitmap(rtg)
@@
expression rtg;
@@
- rtg->rtg_inodes[XFS_RTGI_SUMMARY]
+ rtg_summary(rtg)
and the CLI command:
$ spatch --sp-file /tmp/moo.cocci --dir fs/xfs/ --use-gitgrep --in-place
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
smatch reported that we screwed up the error cleanup in this function.
Fix it.
Cc: <stable@vger.kernel.org> # v6.13-rc1
Fixes: ae897e0bed ("xfs: support creating per-RTG files in growfs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the min and max agblock numbers to the generic xfs_group structure
so that we can start building validators for extents within an rtgroup.
While we're at it, use check_add_overflow for the extent length
computation because that has much better overflow checking.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create an ioctl so that the kernel can report the status of realtime
groups to userspace.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Record the state of per-rtgroup metadata sickness in the rtgroup
structure for later reporting.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Every time we update parts of the primary filesystem superblock that are
echoed in the rt superblock, we must update the rt super. Avoid
changing the log to support logging to the rt device by using ordered
buffers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Define the ondisk format of realtime group metadata, and a superblock
for realtime volumes. rt supers are conditionally enabled by a
predicate function so that they can be disabled if we ever implement
zoned storage support for the realtime volume.
For rt group enabled file systems there is a separate bitmap and summary
file for each group and thus the number of bitmap and summary blocks
needs to be calculated differently.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
To support adding new RT groups in growfs, we need to be able to create
the per-RT group files. Add a new xfs_rtginode_create helper to create
a given per-RTG file. Most of the code for that is shared, but the
details of the actual file are abstracted out using a new create method
in struct xfs_rtginode_ops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Move the pointers to the RT bitmap and summary inodes as well as the
summary cache to the rtgroups structure to prepare for having a
separate bitmap and summary inodes for each rtgroup.
Code using the inodes now needs to operate on a rtgroup. Where easily
possible such code is converted to iterate over all rtgroups, else
rtgroup 0 (the only one that can currently exist) is hardcoded.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Create the necessary per-rtgroup infrastructure that we need to load
metadata inodes into memory.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a dynamic lockdep class key for rtgroup inodes. This will enable
lockdep to deduce inconsistencies in the rtgroup metadata ILOCK locking
order. Each class can have 8 subclasses, and for now we will only have
2 inodes per group. This enables rtgroup order and inode order checks
when nesting ILOCKs.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Define helper functions to lock all metadata inodes related to a
realtime group. There's not much to look at now, but this will become
important when we add per-rtgroup metadata files and online fsck code
for them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create an incore object that will contain information about a realtime
allocation group. This will eventually enable us to shard the realtime
section in a similar manner to how we shard the data section, but for
now just a single object for the entire RT subvolume is created.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
