Old SMB1 servers without CAP_NT_SMBS do not support CIFS_open() function
and instead SMBLegacyOpen() needs to be used. This logic is already handled
in cifs_open_file() function, which is server->ops->open callback function.
So for querying and creating MF symlinks use open callback function instead
of CIFS_open() function directly.
This change fixes querying and creating new MF symlinks on Windows 98.
Currently cifs_query_mf_symlink() is not able to detect MF symlink and
cifs_create_mf_symlink() is failing with EIO error.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When converting access_flags to SMBOPEN mode, check for all possible access
flags, not only GENERIC_READ and GENERIC_WRITE flags.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB negotiate retry functionality in cifs_negotiate() is currently broken
and does not work when doing socket reconnect. Caller of this function,
which is cifs_negotiate_protocol() requires that tcpStatus after successful
execution of negotiate callback stay in CifsInNegotiate. But if the
CIFSSMBNegotiate() called from cifs_negotiate() fails due to connection
issues then tcpStatus is changed as so repeated CIFSSMBNegotiate() call
does not help.
Fix this problem by moving retrying code from negotiate callback (which is
either cifs_negotiate() or smb2_negotiate()) to cifs_negotiate_protocol()
which is caller of those callbacks. This allows to properly handle and
implement correct transistions between tcpStatus states as function
cifs_negotiate_protocol() already handles it.
With this change, cifs_negotiate_protocol() now handles also -EAGAIN error
set by the RFC1002_NEGATIVE_SESSION_RESPONSE processing after reconnecting
with NetBIOS session.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now all NetBIOS session logic is handled in ip_rfc1001_connect() function,
so cleanup is_smb_response() function which contains generic handling of
incoming SMB packets. Note that function is_smb_response() is not used
directly or indirectly (e.g. over cifs_demultiplex_thread() by
ip_rfc1001_connect() function.
Except the Negative Session Response and the Session Keep Alive packet, the
cifs_demultiplex_thread() should not receive any NetBIOS session packets.
And Session Keep Alive packet may be received only when the NetBIOS session
was established by ip_rfc1001_connect() function. So treat any such packet
as error and schedule reconnect.
Negative Session Response packet is returned from Windows SMB server (from
Windows 98 and also from Windows Server 2022) if client sent over port 139
SMB negotiate request without previously establishing a NetBIOS session.
The common scenario is that Negative Session Response packet is returned
for the SMB negotiate packet, which is the first one which SMB client
sends (if it is not establishing a NetBIOS session).
Note that server port 139 may be forwarded and mapped between virtual
machines to different number. And Linux SMB client do not call function
ip_rfc1001_connect() when prot is not 139. So nowadays when using port
mapping or port forwarding between VMs, it is not so uncommon to see this
error.
Currently the logic on Negative Session Response packet changes server port
to 445 and force reconnection. But this logic does not work when using
non-standard port numbers and also does not help if the server on specified
port is requiring establishing a NetBIOS session.
Fix this Negative Session Response logic and instead of changing server
port (on which server does not have to listen), force reconnection with
establishing a NetBIOS session.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently SMB client always tries to initialize NetBIOS session when the
server port is 139. This is useful for default cases, but nowadays when
using non-standard routing or testing between VMs, it is common that
servers are listening on non-standard ports.
So add a new mount option -o nbsessinit and -o nonbsessinit which either
forces initialization or disables initialization regardless of server port
number.
This allows Linux SMB client to connect to older SMB1 server listening on
non-standard port, which requires initialization of NetBIOS session, by
using additional mount options -o port= and -o nbsessinit.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Changing owner is controlled by DACL permission WRITE_OWNER. Changing DACL
itself is controlled by DACL permisssion WRITE_DAC. Owner of the file has
implicit WRITE_DAC permission even when it is not explicitly granted for
owner by DACL.
Reading DACL or owner is controlled only by one permission READ_CONTROL.
WRITE_OWNER permission can be bypassed by the SeTakeOwnershipPrivilege,
which is by default available for local administrators.
So if the local administrator wants to access some file to which does not
have access, it is required to first change owner to ourself and then
change DACL permissions.
Currently Linux SMB client does not support this because client does not
provide a way to change owner without touching DACL permissions.
Fix this problem by introducing a new xattr "system.smb3_ntsd_owner" for
setting/changing only owner part of the security descriptor.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Access to SACL part of SMB security descriptor is granted by SACL privilege
which by default is accessible only for local administrator. But it can be
granted to any other user by local GPO or AD. SACL access is not granted by
DACL permissions and therefore is it possible that some user would not have
access to DACLs of some file, but would have access to SACLs of all files.
So it means that for accessing SACLs (either getting or setting) in some
cases requires not touching or asking for DACLs.
Currently Linux SMB client does not allow to get or set SACLs without
touching DACLs. Which means that user without DACL access is not able to
get or set SACLs even if it has access to SACLs.
Fix this problem by introducing a new xattr "system.smb3_ntsd_sacl" for
accessing only SACLs part of the security descriptor (therefore without
DACLs and OWNER/GROUP).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a SMB connection is reset and reconnected, the negotiated IO
parameters (rsize/wsize) can become out of sync with the server's
current capabilities. This can lead to suboptimal performance or
even IO failures if the server's limits have changed.
This patch implements automatic IO size renegotiation:
1. Adds cifs_renegotiate_iosize() function to update all superblocks
associated with a tree connection
2. Updates each mount's rsize/wsize based on current server capabilities
3. Calls this function after successful tree connection reconnection
With this change, all mount points will automatically maintain optimal
and reliable IO parameters after network disruptions, using the
bidirectional mapping added in previous patches.
This completes the series improving connection resilience by keeping
mount parameters synchronized with server capabilities.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
During mount option processing and negotiation with the server, the
original user-specified rsize/wsize values were being modified directly.
This makes it impossible to recover these values after a connection
reset, leading to potential degraded performance after reconnection.
The other problem is that When negotiating read and write sizes, there are
cases where the negotiated values might calculate to zero, especially
during reconnection when server->max_read or server->max_write might be
reset. In general, these values come from the negotiation response.
According to MS-SMB2 specification, these values should be at least 65536
bytes.
This patch improves IO parameter handling:
1. Adds vol_rsize and vol_wsize fields to store the original user-specified
values separately from the negotiated values
2. Uses got_rsize/got_wsize flags to determine if values were
user-specified rather than checking for non-zero values, which is more
reliable
3. Adds a prevent_zero_iosize() helper function to ensure IO sizes are
never negotiated down to zero, which could happen in edge cases like
when server->max_read/write is zero
The changes make the CIFS client more resilient to unusual server
responses and reconnection scenarios, preventing potential failures
when IO sizes are calculated to be zero.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, when a SMB connection is reset and renegotiated with the
server, there's no way to update all related mount points with new
negotiated sizes. This is because while superblocks (cifs_sb_info)
maintain references to tree connections (tcon) through tcon_link
structures, there is no reverse mapping from a tcon back to all the
superblocks using it.
This patch adds a bidirectional relationship between tcon and
cifs_sb_info structures by:
1. Adding a cifs_sb_list to tcon structure with appropriate locking
2. Adding tcon_sb_link to cifs_sb_info to join the list
3. Managing the list entries during mount and umount operations
The bidirectional relationship enables future functionality to locate and
update all superblocks connected to a specific tree connection, such as:
- Updating negotiated parameters after reconnection
- Efficiently notifying all affected mounts of capability changes
This is the first part of a series to improve connection resilience
by keeping all mount parameters in sync with server capabilities
after reconnection.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
echo_interval is checked at mount time, the code has become
unreachable.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
The echo_interval is not limited in any way during mounting,
which makes it possible to write a large number to it. This can
cause an overflow when multiplying ctx->echo_interval by HZ in
match_server().
Add constraints for echo_interval to smb3_fs_context_parse_param().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: adfeb3e00e ("cifs: Make echo interval tunable")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=Mjh/
-----END PGP SIGNATURE-----
Merge tag '6.15-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix for network namespace refcount leak
- Multichannel fix and minor multichannel debug message cleanup
- Fix potential null ptr reference in SMB3 close
- Fix for special file handling when reparse points not supported by
server
- Two ACL fixes one for stricter ACE validation, one for incorrect
perms requested
- Three RFC1001 fixes: one for SMB3 mounts on port 139, one for better
default hostname, and one for better session response processing
- Minor update to email address for MAINTAINERS file
- Allow disabling Unicode for access to old SMB1 servers
- Three minor cleanups
* tag '6.15-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add new mount option -o nounicode to disable SMB1 UNICODE mode
cifs: Set default Netbios RFC1001 server name to hostname in UNC
smb: client: Fix netns refcount imbalance causing leaks and use-after-free
cifs: add validation check for the fields in smb_aces
CIFS: Propagate min offload along with other parameters from primary to secondary channels.
cifs: Improve establishing SMB connection with NetBIOS session
cifs: Fix establishing NetBIOS session for SMB2+ connection
cifs: Fix getting DACL-only xattr system.cifs_acl and system.smb3_acl
cifs: Check if server supports reparse points before using them
MAINTAINERS: reorder preferred email for Steve French
cifs: avoid NULL pointer dereference in dbg call
smb: client: Remove redundant check in smb2_is_path_accessible()
smb: client: Remove redundant check in cifs_oplock_break()
smb: mark the new channel addition log as informational log with cifs_info
smb: minor cleanup to remove unused function declaration
SMB1 protocol supports non-UNICODE (8-bit OEM character set) and
UNICODE (UTF-16) modes.
Linux SMB1 client implements both of them but currently does not allow to
choose non-UNICODE mode when SMB1 server announce UNICODE mode support.
This change adds a new mount option -o nounicode to disable UNICODE mode
and force usage of non-UNICODE (8-bit OEM character set) mode.
This allows to test non-UNICODE implementation of Linux SMB1 client against
any SMB1 server, including modern and recent Windows SMB1 server.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows SMB servers (including SMB2+) which are working over RFC1001
require that Netbios server name specified in RFC1001 Session Request
packet is same as the UNC host name. Netbios server name can be already
specified manually via -o servern= option.
With this change the RFC1001 server name is set automatically by extracting
the hostname from the mount source.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit ef7134c7fc ("smb: client: Fix use-after-free of network
namespace.") attempted to fix a netns use-after-free issue by manually
adjusting reference counts via sk->sk_net_refcnt and sock_inuse_add().
However, a later commit e9f2517a3e ("smb: client: fix TCP timers deadlock
after rmmod") pointed out that the approach of manually setting
sk->sk_net_refcnt in the first commit was technically incorrect, as
sk->sk_net_refcnt should only be set for user sockets. It led to issues
like TCP timers not being cleared properly on close. The second commit
moved to a model of just holding an extra netns reference for
server->ssocket using get_net(), and dropping it when the server is torn
down.
But there remain some gaps in the get_net()/put_net() balancing added by
these commits. The incomplete reference handling in these fixes results
in two issues:
1. Netns refcount leaks[1]
The problem process is as follows:
```
mount.cifs cifsd
cifs_do_mount
cifs_mount
cifs_mount_get_session
cifs_get_tcp_session
get_net() /* First get net. */
ip_connect
generic_ip_connect /* Try port 445 */
get_net()
->connect() /* Failed */
put_net()
generic_ip_connect /* Try port 139 */
get_net() /* Missing matching put_net() for this get_net().*/
cifs_get_smb_ses
cifs_negotiate_protocol
smb2_negotiate
SMB2_negotiate
cifs_send_recv
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
cifs_reconnect
cifs_abort_connection
sock_release();
server->ssocket = NULL;
/* Missing put_net() here. */
generic_ip_connect
get_net()
->connect() /* Failed */
put_net()
sock_release();
server->ssocket = NULL;
free_rsp_buf
...
clean_demultiplex_info
/* It's only called once here. */
put_net()
```
When cifs_reconnect() is triggered, the server->ssocket is released
without a corresponding put_net() for the reference acquired in
generic_ip_connect() before. it ends up calling generic_ip_connect()
again to retry get_net(). After that, server->ssocket is set to NULL
in the error path of generic_ip_connect(), and the net count cannot be
released in the final clean_demultiplex_info() function.
2. Potential use-after-free
The current refcounting scheme can lead to a potential use-after-free issue
in the following scenario:
```
cifs_do_mount
cifs_mount
cifs_mount_get_session
cifs_get_tcp_session
get_net() /* First get net */
ip_connect
generic_ip_connect
get_net()
bind_socket
kernel_bind /* failed */
put_net()
/* after out_err_crypto_release label */
put_net()
/* after out_err label */
put_net()
```
In the exception handling process where binding the socket fails, the
get_net() and put_net() calls are unbalanced, which may cause the
server->net reference count to drop to zero and be prematurely released.
To address both issues, this patch ties the netns reference counting to
the server->ssocket and server lifecycles. The extra reference is now
acquired when the server or socket is created, and released when the
socket is destroyed or the server is torn down.
[1]: https://bugzilla.kernel.org/show_bug.cgi?id=219792
Fixes: ef7134c7fc ("smb: client: Fix use-after-free of network namespace.")
Fixes: e9f2517a3e ("smb: client: fix TCP timers deadlock after rmmod")
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs.ko is missing validation check when accessing smb_aces.
This patch add validation check for the fields in smb_aces.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In a multichannel setup, it was observed that a few fields were not being
copied over to the secondary channels, which impacted performance in cases
where these options were relevant but not properly synchronized. To address
this, this patch introduces copying the following parameters from the
primary channel to the secondary channels:
- min_offload
- compression.requested
- dfs_conn
- ignore_signature
- leaf_fullpath
- noblockcnt
- retrans
- sign
By copying these parameters, we ensure consistency across channels and
prevent performance degradation due to missing or outdated settings.
Cc: stable@vger.kernel.org
Signed-off-by: Aman <aman1@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Function ip_rfc1001_connect() send NetBIOS session request but currently
does not read response. It even does not wait for the response. Instead it
just calls usleep_range(1000, 2000) and explain in comment that some
servers require short break before sending SMB negotiate packet. Response
is later handled in generic is_smb_response() function called from
cifs_demultiplex_thread().
That comment probably refers to the old DOS SMB server which cannot process
incoming SMB negotiate packet if it has not sent NetBIOS session response
packet. Note that current sleep timeout is too small when trying to
establish connection to DOS SMB server running in qemu virtual machine
connected over qemu user networking with guestfwd netcat options. So that
usleep_range() call is not useful at all.
NetBIOS session response packet contains useful error information, like
the server name specified NetBIOS session request packet is incorrect.
Old Windows SMB servers and even the latest SMB server on the latest
Windows Server 2022 version requires that the name is the correct server
name, otherwise they return error RFC1002_NOT_PRESENT. This applies for all
SMB dialects (old SMB1, and also modern SMB2 and SMB3).
Therefore read the reply of NetBIOS session request and implement parsing
of the reply. Log received error to dmesg to help debugging reason why
connection was refused. Also convert NetBIOS error to useful errno.
Note that ip_rfc1001_connect() function is used only when doing connection
over port 139. So the common SMB scenario over port 445 is not affected by
this change at all.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Function ip_rfc1001_connect() which establish NetBIOS session for SMB
connections, currently uses smb_send() function for sending NetBIOS Session
Request packet. This function expects that the passed buffer is SMB packet
and for SMB2+ connections it mangles packet header, which breaks prepared
NetBIOS Session Request packet. Result is that this function send garbage
packet for SMB2+ connection, which SMB2+ server cannot parse. That function
is not mangling packets for SMB1 connections, so it somehow works for SMB1.
Fix this problem and instead of smb_send(), use smb_send_kvec() function
which does not mangle prepared packet, this function send them as is. Just
API of this function takes struct msghdr (kvec) instead of packet buffer.
[MS-SMB2] specification allows SMB2 protocol to use NetBIOS as a transport
protocol. NetBIOS can be used over TCP via port 139. So this is a valid
configuration, just not so common. And even recent Windows versions (e.g.
Windows Server 2022) still supports this configuration: SMB over TCP port
139, including for modern SMB2 and SMB3 dialects.
This change fixes SMB2 and SMB3 connections over TCP port 139 which
requires establishing of NetBIOS session. Tested that this change fixes
establishing of SMB2 and SMB3 connections with Windows Server 2022.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently ->get_acl() callback always create request for OWNER, GROUP and
DACL, even when only DACLs was requested by user. Change API callback to
request only information for which the caller asked. Therefore when only
DACLs requested, then SMB client will prepare and send DACL-only request.
This change fixes retrieving of "system.cifs_acl" and "system.smb3_acl"
xattrs to contain only DACL structure as documented.
Note that setting/changing of "system.cifs_acl" and "system.smb3_acl"
xattrs already takes only DACL structure and ignores all other fields.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Do not attempt to query or create reparse point when server fs does not
support it. This will prevent creating unusable empty object on the server.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90rNwAKCRCRxhvAZXjc
onBJAP9Z8Ywmlb5KQ1E3HvDmkwyY6yOSyZ9/CmbzrkCJ8ywYkQD/d9/xt0EP/O/q
N8YtzXArHWt7u0YbcVpy9WK3F72BdwU=
=VJgY
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs async dir updates from Christian Brauner:
"This contains cleanups that fell out of the work from async directory
handling:
- Change kern_path_locked() and user_path_locked_at() to never return
a negative dentry. This simplifies the usability of these helpers
in various places
- Drop d_exact_alias() from the remaining place in NFS where it is
still used. This also allows us to drop the d_exact_alias() helper
completely
- Drop an unnecessary call to fh_update() from nfsd_create_locked()
- Change i_op->mkdir() to return a struct dentry
Change vfs_mkdir() to return a dentry provided by the filesystems
which is hashed and positive. This allows us to reduce the number
of cases where the resulting dentry is not positive to very few
cases. The code in these places becomes simpler and easier to
understand.
- Repack DENTRY_* and LOOKUP_* flags"
* tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: fix inline emphasis warning
VFS: Change vfs_mkdir() to return the dentry.
nfs: change mkdir inode_operation to return alternate dentry if needed.
fuse: return correct dentry for ->mkdir
ceph: return the correct dentry on mkdir
hostfs: store inode in dentry after mkdir if possible.
Change inode_operations.mkdir to return struct dentry *
nfsd: drop fh_update() from S_IFDIR branch of nfsd_create_locked()
nfs/vfs: discard d_exact_alias()
VFS: add common error checks to lookup_one_qstr_excl()
VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry
VFS: repack LOOKUP_ bit flags.
VFS: repack DENTRY_ flags.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90p4AAKCRCRxhvAZXjc
ojMIAP9atkG3u7+490+NGWLdulQlaHnD51Owa9MiW87UfKpsTQEArwi/NrJqXJNT
PFQ2xIa5TxG+9haChR89w3kjZ6b/hgs=
=iDkx
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Add CONFIG_DEBUG_VFS infrastucture:
- Catch invalid modes in open
- Use the new debug macros in inode_set_cached_link()
- Use debug-only asserts around fd allocation and install
- Place f_ref to 3rd cache line in struct file to resolve false
sharing
Cleanups:
- Start using anon_inode_getfile_fmode() helper in various places
- Don't take f_lock during SEEK_CUR if exclusion is guaranteed by
f_pos_lock
- Add unlikely() to kcmp()
- Remove legacy ->remount_fs method from ecryptfs after port to the
new mount api
- Remove invalidate_inodes() in favour of evict_inodes()
- Simplify ep_busy_loopER by removing unused argument
- Avoid mmap sem relocks when coredumping with many missing pages
- Inline getname()
- Inline new_inode_pseudo() and de-staticize alloc_inode()
- Dodge an atomic in putname if ref == 1
- Consistently deref the files table with rcu_dereference_raw()
- Dedup handling of struct filename init and refcounts bumps
- Use wq_has_sleeper() in end_dir_add()
- Drop the lock trip around I_NEW wake up in evict()
- Load the ->i_sb pointer once in inode_sb_list_{add,del}
- Predict not reaching the limit in alloc_empty_file()
- Tidy up do_sys_openat2() with likely/unlikely
- Call inode_sb_list_add() outside of inode hash lock
- Sort out fd allocation vs dup2 race commentary
- Turn page_offset() into a wrapper around folio_pos()
- Remove locking in exportfs around ->get_parent() call
- try_lookup_one_len() does not need any locks in autofs
- Fix return type of several functions from long to int in open
- Fix return type of several functions from long to int in ioctls
Fixes:
- Fix watch queue accounting mismatch"
* tag 'vfs-6.15-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: sort out fd allocation vs dup2 race commentary, take 2
fs: call inode_sb_list_add() outside of inode hash lock
fs: tidy up do_sys_openat2() with likely/unlikely
fs: predict not reaching the limit in alloc_empty_file()
fs: load the ->i_sb pointer once in inode_sb_list_{add,del}
fs: drop the lock trip around I_NEW wake up in evict()
fs: use wq_has_sleeper() in end_dir_add()
VFS/autofs: try_lookup_one_len() does not need any locks
fs: dedup handling of struct filename init and refcounts bumps
fs: consistently deref the files table with rcu_dereference_raw()
exportfs: remove locking around ->get_parent() call.
fs: use debug-only asserts around fd allocation and install
fs: dodge an atomic in putname if ref == 1
vfs: Remove invalidate_inodes()
ecryptfs: remove NULL remount_fs from super_operations
watch_queue: fix pipe accounting mismatch
fs: place f_ref to 3rd cache line in struct file to resolve false sharing
epoll: simplify ep_busy_loop by removing always 0 argument
fs: Turn page_offset() into a wrapper around folio_pos()
kcmp: improve performance adding an unlikely hint to task comparisons
...
cifs_server_dbg() implies server to be non-NULL so
move call under condition to avoid NULL pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e79b0332ae ("cifs: ignore cached share root handle closing errors")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is an unnecessary NULL check of cifs_sb in smb2_is_path_accessible(),
since cifs_sb is dereferenced multiple times prior to it.
It seems that there is no need to introduce any NULL checks of cifs_sb,
since arguments of smb2_is_path_accessible() are assumed to be non-NULL.
Therefore, this redundant check can be removed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is an unnecessary NULL check of inode in cifs_oplock_break(), since
there are multiple dereferences of cinode prior to it.
Based on usage of cifs_oplock_break() in cifs_new_fileinfo() we can safely
assume that inode is not NULL, so there is no need to check inode in
cifs_oplock_break() at all.
Therefore, this redundant check can be removed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
For multichannel mounts, when a new channel is successfully opened
we currently log 'successfully opened new channel on iface: <>' as
cifs_dbg(VFS..) which is eventually translated into a pr_err log.
Marking these informational logs as error logs may lead to confusion
for users so they will now be logged as info logs instead.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
remove cifs_writev_complete declaration from header file
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If @server->tcpStatus is set to CifsNeedReconnect after acquiring
@ses->session_mutex in smb2_reconnect() or cifs_reconnect_tcon(), it
means that a concurrent thread failed to negotiate, in which case the
server is no longer responding to any SMB requests, so there is no
point making the caller retry the IO by returning -EAGAIN.
Fix this by returning -EHOSTDOWN to the callers on soft mounts.
Cc: David Howells <dhowells@redhat.com>
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
User-provided mount parameter closetimeo of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5efdd9122e ("smb3: allow deferred close timeout to be configurable")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
User-provided mount parameter actimeo of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6d20e8406f ("cifs: add attribute cache timeout (actimeo) tunable")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
User-provided mount parameter acdirmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4c9f948142 ("cifs: Add new mount parameter "acdirmax" to allow caching directory metadata")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
User-provided mount parameter acregmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5780464614 ("cifs: Add new parameter "acregmax" for distinct file and directory metadata timeout")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting a CIFS share with 'guest' mount option, mount.cifs(8)
will set empty password= and password2= options. Currently we only
handle empty strings from user= and password= options, so the mount
will fail with
cifs: Bad value for 'password2'
Fix this by handling empty string from password2= option as well.
Link: https://bbs.archlinux.org/viewtopic.php?id=303927
Reported-by: Adam Williamson <awilliam@redhat.com>
Closes: https://lore.kernel.org/r/83c00b5fea81c07f6897a5dd3ef50fd3b290f56c.camel@redhat.com
Fixes: 35f834265e ("smb3: fix broken reconnect when password changing on the server by allowing password rotation")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The function can be replaced by evict_inodes. The only difference is
that evict_inodes() skips the inodes with positive refcount without
touching ->i_lock, but they are equivalent as evict_inodes() repeats the
refcount check after having grabbed ->i_lock.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250307144318.28120-2-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
parse_dcal() validate num_aces to allocate ace array.
f (num_aces > ULONG_MAX / sizeof(struct smb_ace *))
It is an incorrect validation that we can create an array of size ULONG_MAX.
smb_acl has ->size field to calculate actual number of aces in response buffer
size. Use this to check invalid num_aces.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2.4.5 in [MS-DTYP].pdf describe the data type of num_aces as le16.
AceCount (2 bytes): An unsigned 16-bit integer that specifies the count
of the number of ACE records in the ACL.
Change it to le16 and add reserved field to smb_acl struct.
Reported-by: Igor Leite Ladessa <igor-ladessa@hotmail.com>
Tested-by: Igor Leite Ladessa <igor-ladessa@hotmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some filesystems, such as NFS, cifs, ceph, and fuse, do not have
complete control of sequencing on the actual filesystem (e.g. on a
different server) and may find that the inode created for a mkdir
request already exists in the icache and dcache by the time the mkdir
request returns. For example, if the filesystem is mounted twice the
directory could be visible on the other mount before it is on the
original mount, and a pair of name_to_handle_at(), open_by_handle_at()
calls could instantiate the directory inode with an IS_ROOT() dentry
before the first mkdir returns.
This means that the dentry passed to ->mkdir() may not be the one that
is associated with the inode after the ->mkdir() completes. Some
callers need to interact with the inode after the ->mkdir completes and
they currently need to perform a lookup in the (rare) case that the
dentry is no longer hashed.
This lookup-after-mkdir requires that the directory remains locked to
avoid races. Planned future patches to lock the dentry rather than the
directory will mean that this lookup cannot be performed atomically with
the mkdir.
To remove this barrier, this patch changes ->mkdir to return the
resulting dentry if it is different from the one passed in.
Possible returns are:
NULL - the directory was created and no other dentry was used
ERR_PTR() - an error occurred
non-NULL - this other dentry was spliced in
This patch only changes file-systems to return "ERR_PTR(err)" instead of
"err" or equivalent transformations. Subsequent patches will make
further changes to some file-systems to return a correct dentry.
Not all filesystems reliably result in a positive hashed dentry:
- NFS, cifs, hostfs will sometimes need to perform a lookup of
the name to get inode information. Races could result in this
returning something different. Note that this lookup is
non-atomic which is what we are trying to avoid. Placing the
lookup in filesystem code means it only happens when the filesystem
has no other option.
- kernfs and tracefs leave the dentry negative and the ->revalidate
operation ensures that lookup will be called to correctly populate
the dentry. This could be fixed but I don't think it is important
to any of the users of vfs_mkdir() which look at the dentry.
The recommendation to use
d_drop();d_splice_alias()
is ugly but fits with current practice. A planned future patch will
change this.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-2-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix cifs_readv_callback() to call netfs_read_subreq_terminated() rather
than queuing the subrequest work item (which is unset). Also call the
I/O progress tracepoint.
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Fixes: e2d46f2ec3 ("netfs: Change the read result collector to only use one work item")
Reported-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219793
Tested-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add check for the return value of cifs_buf_get() and cifs_small_buf_get()
in receive_encrypted_standard() to prevent null pointer dereference.
Fixes: eec04ea119 ("smb: client: fix OOB in receive_encrypted_standard()")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This would help to track and detect by caller if the reparse point type was
processed or not.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `__struct_group()` helper to
separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
smb2_file_link_info_hdr` and `struct smb2_file_rename_info_hdr`
to replace the type of the objects causing trouble: `rename_info`
and `link_info` in `struct smb2_compound_vars`.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix 86 of the following warnings:
fs/smb/client/cifsglob.h:2335:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/smb/client/cifsglob.h:2334:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the user sets a file or directory as read-only (e.g. ~S_IWUGO),
the client will set the ATTR_READONLY attribute by sending an
SMB2_SET_INFO request to the server in cifs_setattr_{,nounix}(), but
cifsInodeInfo::cifsAttrs will be left unchanged as the client will
only update the new file attributes in the next call to
{smb311_posix,cifs}_get_inode_info() with the new metadata filled in
@data parameter.
Commit a18280e7fd ("smb: cilent: set reparse mount points as
automounts") mistakenly removed the @data NULL check when calling
is_inode_cache_good(), which broke the above case as the new
ATTR_READONLY attribute would end up not being updated on files with a
read lease.
Fix this by updating the inode whenever we have cached metadata in
@data parameter.
Reported-by: Horst Reiterer <horst.reiterer@fabasoft.com>
Closes: https://lore.kernel.org/r/85a16504e09147a195ac0aac1c801280@fabasoft.com
Fixes: a18280e7fd ("smb: cilent: set reparse mount points as automounts")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The netfs library could break down a read request into
multiple subrequests. When multichannel is used, there is
potential to improve performance when each of these
subrequests pick a different channel.
Today we call cifs_pick_channel when the main read request
is initialized in cifs_init_request. This change moves this to
cifs_prepare_read, which is the right place to pick channel since
it gets called for each subrequest.
Interestingly cifs_prepare_write already does channel selection
for individual subreq, but looks like it was missed for read.
This is especially important when multichannel is used with
increased rasize.
In my test setup, with rasize set to 8MB, a sequential read
of large file was taking 11.5s without this change. With the
change, it completed in 9s. The difference is even more signigicant
with bigger rasize.
Cc: <stable@vger.kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
MS-SMB2 section 2.2.13.2.10 specifies that 'epoch' should be a 16-bit
unsigned integer used to track lease state changes. Change the data
type of all instances of 'epoch' from unsigned int to __u16. This
simplifies the epoch change comparisons and makes the code more
compliant with the protocol spec.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After commit 36008fe6e3 ("smb: client: don't try following DFS links
in cifs_tree_connect()"), TCP_Server_Info::leaf_fullpath will no
longer be changed, so there is no need to kstrdup() it.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the client attempts to tree connect to a domain-based DFS
namespace from a DFS interlink target, the server will return
STATUS_BAD_NETWORK_NAME and the following will appear on dmesg:
CIFS: VFS: BAD_NETWORK_NAME: \\dom\dfs
Since a DFS share might contain several DFS interlinks and they expire
after 10 minutes, the above message might end up being flooded on
dmesg when mounting or accessing them.
Print this only once per share.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers don't respect the DFSREF_STORAGE_SERVER bit, so
unconditionally tree connect to DFS link target and then decide
whether or not continue chasing DFS referrals for DFS interlinks.
Otherwise the client would fail to mount such shares.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=/P+2
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
As SMB protocol distinguish between symlink to directory and symlink to
file, add some mechanism to disallow resolving incompatible types.
When SMB symlink is of the directory type, ensure that its target path ends
with slash. This forces Linux to not allow resolving such symlink to file.
And when SMB symlink is of the file type and its target path ends with
slash then returns an error as such symlink is unresolvable. Such symlink
always points to invalid location as file cannot end with slash.
As POSIX server does not distinguish between symlinks to file and symlink
directory, do not apply this change for symlinks from POSIX SMB server. For
POSIX SMB servers, this change does nothing.
This mimics Windows behavior of native SMB symlinks.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This change implements support for creating new symlink in WSL-style by
Linux cifs client when -o reparse=wsl mount option is specified. WSL-style
symlink uses reparse point with tag IO_REPARSE_TAG_LX_SYMLINK and symlink
target location is stored in reparse buffer in UTF-8 encoding prefixed by
32-bit flags. Flags bits are unknown, but it was observed that WSL always
sets flags to value 0x02000000. Do same in Linux cifs client.
New symlinks would be created in WSL-style only in case the mount option
-o reparse=wsl is specified, which is not by default. So default CIFS
mounts are not affected by this change.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are now more servers which advertise support for IAKerb (passthrough
Kerberos authentication via proxy). IAKerb is a public extension industry
standard Kerberos protocol that allows a client without line-of-sight
to a Domain Controller to authenticate. There can be cases where we
would fail to mount if the server only advertises the OID for IAKerb
in SPNEGO/GSSAPI. Add code to allow us to still upcall to userspace
in these cases to obtain the Kerberos ticket.
Signed-off-by: Steve French <stfrench@microsoft.com>
struct FILE_ALL_INFO for level 263 (0x107) used by QPathInfo does not have
any IndexNumber, AccessFlags, IndexNumber1, CurrentByteOffset, Mode or
AlignmentRequirement members. So remove all of them.
Also adjust code in move_cifs_info_to_smb2() function which converts struct
FILE_ALL_INFO to struct smb2_file_all_info.
Fixed content of struct FILE_ALL_INFO was verified that is correct against:
* [MS-CIFS] section 2.2.8.3.10 SMB_QUERY_FILE_ALL_INFO
* Samba server implementation of trans2 query file/path for level 263
* Packet structure tests against Windows SMB servers
This change fixes CIFSSMBQFileInfo() and CIFSSMBQPathInfo() functions which
directly copy received FILE_ALL_INFO network buffers into kernel structures
of FILE_ALL_INFO type.
struct FILE_ALL_INFO is the response structure returned by the SMB server.
So the incorrect definition of this structure can lead to returning bogus
information in stat() call.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
CIFS client is currently able to parse NFS-style symlinks, but is not able
to create them. This functionality is useful when the mounted SMB share is
used also by Windows NFS server (on Windows Server 2012 or new). It allows
interop of symlinks between SMB share mounted by Linux CIFS client and same
export from Windows NFS server mounted by some NFS client.
New symlinks would be created in NFS-style only in case the mount option
-o reparse=nfs is specified, which is not by default. So default CIFS
mounts are not affected by this change.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Native Windows sockets created by WinSock on Windows 10 April 2018 Update
(version 1803) or Windows Server 2019 (version 1809) or later versions is
reparse point with IO_REPARSE_TAG_AF_UNIX tag, with empty reparse point
data buffer and without any EAs.
Create AF_UNIX sockets in this native format if -o nonativesocket was not
specified.
This change makes AF_UNIX sockets created by Linux CIFS client compatible
with AF_UNIX sockets created by Windows applications on NTFS volumes.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Most of the filesystem methods where we care about dentry name
and parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for
expected name and expected parent of the dentry being
validated. That kills quite a bit of boilerplate in
->d_revalidate() instances, along with a bunch of races
where they used to access ->d_name without sufficient
precautions.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ5gkoQAKCRBZ7Krx/gZQ
6w9FAP4nyxNNWMjE1TwuWR/DNDMYYuw/qn/miZ88B5BUM8hzqgD/W2SjRvcbSaIm
xSIYpbtKgtqNU34P1PU+dBvL8Utz2AE=
=TWY8
-----END PGP SIGNATURE-----
Merge tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_revalidate updates from Al Viro:
"Provide stable parent and name to ->d_revalidate() instances
Most of the filesystem methods where we care about dentry name and
parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for expected name
and expected parent of the dentry being validated. That kills quite a
bit of boilerplate in ->d_revalidate() instances, along with a bunch
of races where they used to access ->d_name without sufficient
precautions"
* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: fix ->rename_sem exclusion
orangefs_d_revalidate(): use stable parent inode and name passed by caller
ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
nfs: fix ->d_revalidate() UAF on ->d_name accesses
nfs{,4}_lookup_validate(): use stable parent inode passed by caller
gfs2_drevalidate(): use stable parent inode and name passed by caller
fuse_dentry_revalidate(): use stable parent inode and name passed by caller
vfat_revalidate{,_ci}(): use stable parent inode passed by caller
exfat_d_revalidate(): use stable parent inode passed by caller
fscrypt_d_revalidate(): use stable parent inode passed by caller
ceph_d_revalidate(): propagate stable name down into request encoding
ceph_d_revalidate(): use stable parent inode passed by caller
afs_d_revalidate(): use stable name and parent inode passed by caller
Pass parent directory inode and expected name to ->d_revalidate()
generic_ci_d_compare(): use shortname_storage
ext4 fast_commit: make use of name_snapshot primitives
dissolve external_name.u into separate members
make take_dentry_name_snapshot() lockless
dcache: back inline names with a struct-wrapped array of unsigned long
make sure that DNAME_INLINE_LEN is a multiple of word size
This new mount option allows to completely disable creating new reparse
points. When -o sfu or -o mfsymlinks or -o symlink= is not specified then
creating any special file (fifo, socket, symlink, block and char) will fail
with -EOPNOTSUPP error.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently Linux CIFS client creates a new symlink of the first flavor which
is allowed by mount options, parsed in this order: -o (no)mfsymlinks,
-o (no)sfu, -o (no)unix (+ its aliases) and -o reparse=[type].
Introduce a new mount option -o symlink= for explicitly choosing a symlink
flavor. Possible options are:
-o symlink=default - The default behavior, like before this change.
-o symlink=none - Disallow creating a new symlinks
-o symlink=native - Create as native SMB symlink reparse point
-o symlink=unix - Create via SMB1 unix extension command
-o symlink=mfsymlinks - Create as regular file of mfsymlinks format
-o symlink=sfu - Create as regular system file of SFU format
-o symlink=nfs - Create as NFS reparse point
-o symlink=wsl - Create as WSL reparse point
So for example specifying -o sfu,mfsymlinks,symlink=native will allow to
parse symlinks also of SFU and mfsymlinks types (which are disabled by
default unless mount option is explicitly specified), but new symlinks will
be created under native SMB type (which parsing is always enabled).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the SMB symlink is stored on NT server in absolute form then it points
to the NT object hierarchy, which is different from POSIX one and needs
some conversion / mapping.
To make interoperability with Windows SMB server and WSL subsystem, reuse
its logic of mapping between NT paths and POSIX paths into Linux SMB
client.
WSL subsystem on Windows uses for -t drvfs mount option -o symlinkroot=
which specifies the POSIX path where are expected to be mounted lowercase
Windows drive letters (without colon).
Do same for Linux SMB client and add a new mount option -o symlinkroot=
which mimics the drvfs mount option of the same name. It specifies where in
the Linux VFS hierarchy is the root of the DOS / Windows drive letters, and
translates between absolute NT-style symlinks and absolute Linux VFS
symlinks. Default value of symlinkroot is "/mnt", same what is using WSL.
Note that DOS / Windows drive letter symlinks are just subset of all
possible NT-style symlinks. Drive letters live in NT subtree \??\ and
important details about NT paths and object hierarchy are in the comments
in this change.
When symlink target location from non-POSIX SMB server is in absolute form
(indicated by absence of SYMLINK_FLAG_RELATIVE) then it is converted to
Linux absolute symlink according to symlinkroot configuration.
And when creating a new symlink on non-POSIX SMB server in absolute form
then Linux absolute target is converted to NT-style according to
symlinkroot configuration.
When SMB server is POSIX, then this change does not affect neither reading
target location of symlink, nor creating a new symlink. It is expected that
POSIX SMB server works with POSIX paths where the absolute root is /.
This change improves interoperability of absolute SMB symlinks with Windows
SMB servers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For checking if path is reparse point and setting data->reparse_point
member, it is enough to check if ATTR_REPARSE is present.
It is not required to call CIFS_open() without OPEN_REPARSE_POINT and
checking for -EOPNOTSUPP error code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Member 'symlink' is part of the union in struct cifs_open_info_data. Its
value is assigned on few places, but is always read through another union
member 'reparse_point'. So to make code more readable, always use only
'reparse_point' member and drop whole union structure. No function change.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Function parse_reparse_posix() parses NFS-style reparse points, which are
used only by Windows NFS server since Windows Server 2012 version. This
style is not understood by Microsoft POSIX/Interix/SFU/SUA subsystems.
So make it clear that parse_reparse_posix() function and reparse_posix_data
structure are not POSIX general, but rather NFS specific.
All reparse buffer structures are defined in common/smb2pdu.h and have
_buffer suffix. So move struct reparse_posix_data from client/cifspdu.h to
common/smb2pdu.h and rename it to reparse_nfs_data_buffer for consistency.
Note that also SMB specification in [MS-FSCC] document, section 2.1.2.6
defines it under name "Network File System (NFS) Reparse Data Buffer".
So use this name for consistency.
Having this structure in common/smb2pdu.h can be useful for ksmbd server
code as NFS-style reparse points is the preferred way for implementing
support for special files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linux SMB client already supports more reparse point types but only the
reparse_posix_data is defined in union of struct cifs_open_info_data.
This union is currently used as implicit casting between point types.
With this code style, it hides information that union is used for pointer
casting, and just in mknod_nfs() and posix_reparse_to_fattr() functions.
Other reparse point buffers do not use this kind of casting. So remove
reparse_posix_data from reparse part of struct cifs_open_info_data and for
all cases of reparse buffer use just struct reparse_data_buffer *buf.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This parameter is always true, so remove it and also remove dead code which
is never called (for all false code paths).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB1 callback get_cifs_acl_by_fid() currently ignores its last argument and
therefore ignores request for SACL_SECINFO. Fix this issue by correctly
propagating info argument from get_cifs_acl() and get_cifs_acl_by_fid() to
CIFSSMBGetCIFSACL() function and pass SACL_SECINFO when requested.
For accessing SACLs it is needed to open object with SYSTEM_SECURITY
access. Pass this flag when trying to get or set SACLs.
Same logic is in the SMB2+ code path.
This change fixes getting and setting of "system.cifs_ntsd_full" and
"system.smb3_ntsd_full" xattrs over SMB1 as currently it silentely ignored
SACL part of passed xattr buffer.
Fixes: 3970acf7dd ("SMB3: Add support for getting and setting SACLs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Check if the server honored ATTR_SYSTEM flag by CREATE_OPTION_SPECIAL
option. If not then server does not support ATTR_SYSTEM and newly
created file is not SFU compatible, which means that the call failed.
If CREATE was successful but either setting ATTR_SYSTEM failed or
writing type/data information failed then remove the intermediate
object created by CREATE. Otherwise intermediate empty object stay
on the server.
This ensures that if the creating of SFU files with system attribute is
unsupported by the server then no empty file stay on the server as a result
of unsupported operation.
This is for example case with Samba server and Linux tmpfs storage without
enabled xattr support (where Samba stores ATTR_SYSTEM bit).
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Major and minor numbers for char and block devices are mandatory for stat.
So check that the WSL EA $LXDEV is present for WSL CHR and BLK reparse
points.
WSL reparse point tag determinate type of the file. But file type is
present also in the WSL EA $LXMOD. So check that both file types are same.
Fixes: 78e26bec4d ("smb: client: parse uid, gid, mode and dev from WSL reparse points")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
STATUS_PRIVILEGE_NOT_HELD indicates that user does not have privilege to
issue some operation, for example to create symlink.
Currently STATUS_PRIVILEGE_NOT_HELD is translated to -EIO. Change it to
-EPERM which better describe this error code.
Note that there is no ERR* code usable in ntstatus_to_dos_map[] table which
can be used to -EPERM translation, so do explicit translation in
map_smb_to_linux_error() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
->d_revalidate() often needs to access dentry parent and name; that has
to be done carefully, since the locking environment varies from caller
to caller. We are not guaranteed that dentry in question will not be
moved right under us - not unless the filesystem is such that nothing
on it ever gets renamed.
It can be dealt with, but that results in boilerplate code that isn't
even needed - the callers normally have just found the dentry via dcache
lookup and want to verify that it's in the right place; they already
have the values of ->d_parent and ->d_name stable. There is a couple
of exceptions (overlayfs and, to less extent, ecryptfs), but for the
majority of calls that song and dance is not needed at all.
It's easier to make ecryptfs and overlayfs find and pass those values if
there's a ->d_revalidate() instance to be called, rather than doing that
in the instances.
This commit only changes the calling conventions; making use of supplied
values is left to followups.
NOTE: some instances need more than just the parent - things like CIFS
may need to build an entire path from filesystem root, so they need
more precautions than the usual boilerplate. This series doesn't
do anything to that need - these filesystems have to keep their locking
mechanisms (rename_lock loops, use of dentry_path_raw(), private rwsem
a-la v9fs).
One thing to keep in mind when using name is that name->name will normally
point into the pathname being resolved; the filename in question occupies
name->len bytes starting at name->name, and there is NUL somewhere after it,
but it the next byte might very well be '/' rather than '\0'. Do not
ignore name->len.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
STATUS_NOT_A_REPARSE_POINT indicates that object does not have reparse point
buffer attached, for example returned by FSCTL_GET_REPARSE_POINT.
Currently STATUS_NOT_A_REPARSE_POINT is translated to -EIO. Change it to
-ENODATA which better describe the situation when no reparse point is set.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=lTCw
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc-smb3-client-fixes-part' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix oops in DebugData when link speed 0
- Two reparse point fixes
- Ten DFS (global namespace) fixes
- Symlink error handling fix
- Two SMB1 fixes
- Four cleanup fixes
- Improved debugging of status codes
- Fix incorrect output of tracepoints for compounding, and add missing
compounding tracepoint
* tag 'v6.14-rc-smb3-client-fixes-part' of git://git.samba.org/sfrench/cifs-2.6: (23 commits)
smb: client: handle lack of EA support in smb2_query_path_info()
smb: client: don't check for @leaf_fullpath in match_server()
smb: client: get rid of TCP_Server_Info::refpath_lock
cifs: Remove duplicate struct reparse_symlink_data and SYMLINK_FLAG_RELATIVE
cifs: Do not attempt to call CIFSGetSrvInodeNumber() without CAP_INFOLEVEL_PASSTHRU
cifs: Do not attempt to call CIFSSMBRenameOpenFile() without CAP_INFOLEVEL_PASSTHRU
cifs: Remove declaration of dead CIFSSMBQuerySymLink function
cifs: Fix printing Status code into dmesg
cifs: Add missing NT_STATUS_* codes from nterr.h to nterr.c
cifs: Fix endian types in struct rfc1002_session_packet
cifs: Use cifs_autodisable_serverino() for disabling CIFS_MOUNT_SERVER_INUM in readdir.c
smb3: add missing tracepoint for querying wsl EAs
smb: client: fix order of arguments of tracepoints
smb: client: fix oops due to unset link speed
smb: client: correctly handle ErrorContextData as a flexible array
smb: client: don't retry DFS targets on server shutdown
smb: client: fix return value of parse_dfs_referrals()
smb: client: optimize referral walk on failed link targets
smb: client: provide dns_resolve_{unc,name} helpers
smb: client: parse DNS domain name from domain= option
...
If the server doesn't support both EAs and reparse point in a file,
the SMB2_QUERY_INFO request will fail with either
STATUS_NO_EAS_ON_FILE or STATUS_EAS_NOT_SUPPORT in the compound chain,
so ignore it as long as reparse point isn't
IO_REPARSE_TAG_LX_(CHR|BLK), which would require the EAs to know about
major/minor numbers.
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The matching of DFS connections is already handled by @dfs_conn, so
remove @leaf_fullpath matching altogether.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
TCP_Server_Info::leaf_fullpath is allocated in cifs_get_tcp_session()
and never changed afterwards, so there is no need to serialize its
access.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In file common/smb2pdu.h is defined struct reparse_symlink_data_buffer
which is same as struct reparse_symlink_data and is used in the whole code.
So remove duplicate struct reparse_symlink_data from client/cifspdu.h.
In file common/smb2pdu.h is defined also SYMLINK_FLAG_RELATIVE constant, so
remove duplication from client/cifspdu.h.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ4pRKQAKCRCRxhvAZXjc
ov2dAQCULWjTBWdF8Ro2bfNeXzWvUUnSPjoLJ9B4xlrOB9c2MAEAiwkKHkzAxUco
hCvaRJc3H2ze2wrgbIABPKB2noQVVwk=
=4ojv
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.14-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs netfs updates from Christian Brauner:
"This contains read performance improvements and support for monolithic
single-blob objects that have to be read/written as such (e.g. AFS
directory contents). The implementation of the two parts is interwoven
as each makes the other possible.
- Read performance improvements
The read performance improvements are intended to speed up some
loss of performance detected in cifs and to a lesser extend in afs.
The problem is that we queue too many work items during the
collection of read results: each individual subrequest is collected
by its own work item, and then they have to interact with each
other when a series of subrequests don't exactly align with the
pattern of folios that are being read by the overall request.
Whilst the processing of the pages covered by individual
subrequests as they complete potentially allows folios to be woken
in parallel and with minimum delay, it can shuffle wakeups for
sequential reads out of order - and that is the most common I/O
pattern.
The final assessment and cleanup of an operation is then held up
until the last I/O completes - and for a synchronous sequential
operation, this means the bouncing around of work items just adds
latency.
Two changes have been made to make this work:
(1) All collection is now done in a single "work item" that works
progressively through the subrequests as they complete (and
also dispatches retries as necessary).
(2) For readahead and AIO, this work item be done on a workqueue
and can run in parallel with the ultimate consumer of the data;
for synchronous direct or unbuffered reads, the collection is
run in the application thread and not offloaded.
Functions such as smb2_readv_callback() then just tell netfslib
that the subrequest has terminated; netfslib does a minimal bit of
processing on the spot - stat counting and tracing mostly - and
then queues/wakes up the worker. This simplifies the logic as the
collector just walks sequentially through the subrequests as they
complete and walks through the folios, if buffered, unlocking them
as it goes. It also keeps to a minimum the amount of latency
injected into the filesystem's low-level I/O handling
The way netfs supports filesystems using the deprecated
PG_private_2 flag is changed: folios are flagged and added to a
write request as they complete and that takes care of scheduling
the writes to the cache. The originating read request can then just
unlock the pages whatever happens.
- Single-blob object support
Single-blob objects are files for which the content of the file
must be read from or written to the server in a single operation
because reading them in parts may yield inconsistent results. AFS
directories are an example of this as there exists the possibility
that the contents are generated on the fly and would differ between
reads or might change due to third party interference.
Such objects will be written to and retrieved from the cache if one
is present, though we allow/may need to propose multiple
subrequests to do so. The important part is that read from/write to
the *server* is monolithic.
Single blob reading is, for the moment, fully synchronous and does
result collection in the application thread and, also for the
moment, the API is supplied the buffer in the form of a folio_queue
chain rather than using the pagecache.
- Related afs changes
This series makes a number of changes to the kafs filesystem,
primarily in the area of directory handling:
- AFS's FetchData RPC reply processing is made partially
asynchronous which allows the netfs_io_request's outstanding
operation counter to be removed as part of reducing the
collection to a single work item.
- Directory and symlink reading are plumbed through netfslib using
the single-blob object API and are now cacheable with fscache.
This also allows the afs_read struct to be eliminated and
netfs_io_subrequest to be used directly instead.
- Directory and symlink content are now stored in a folio_queue
buffer rather than in the pagecache. This means we don't require
the RCU read lock and xarray iteration to access it, and folios
won't randomly disappear under us because the VM wants them
back.
- The vnode operation lock is changed from a mutex struct to a
private lock implementation. The problem is that the lock now
needs to be dropped in a separate thread and mutexes don't
permit that.
- When a new directory or symlink is created, we now initialise it
locally and mark it valid rather than downloading it (we know
what it's likely to look like).
- We now use the in-directory hashtable to reduce the number of
entries we need to scan when doing a lookup. The edit routines
have to maintain the hash chains.
- Cancellation (e.g. by signal) of an async call after the
rxrpc_call has been set up is now offloaded to the worker thread
as there will be a notification from rxrpc upon completion. This
avoids a double cleanup.
- A "rolling buffer" implementation is created to abstract out the
two separate folio_queue chaining implementations I had (one for
read and one for write).
- Functions are provided to create/extend a buffer in a folio_queue
chain and tear it down again.
This is used to handle AFS directories, but could also be used to
create bounce buffers for content crypto and transport crypto.
- The was_async argument is dropped from netfs_read_subreq_terminated()
Instead we wake the read collection work item by either queuing it
or waking up the app thread.
- We don't need to use BH-excluding locks when communicating between
the issuing thread and the collection thread as neither of them now
run in BH context.
- Also included are a number of new tracepoints; a split of the
netfslib write collection code to put retrying into its own file
(it gets more complicated with content encryption).
- There are also some minor fixes AFS included, including fixing the
AFS directory format struct layout, reducing some directory
over-invalidation and making afs_mkdir() translate EEXIST to
ENOTEMPY (which is not available on all systems the servers
support).
- Finally, there's a patch to try and detect entry into the folio
unlock function with no folio_queue structs in the buffer (which
isn't allowed in the cases that can get there).
This is a debugging patch, but should be minimal overhead"
* tag 'vfs-6.14-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
netfs: Report on NULL folioq in netfs_writeback_unlock_folios()
afs: Add a tracepoint for afs_read_receive()
afs: Locally initialise the contents of a new symlink on creation
afs: Use the contained hashtable to search a directory
afs: Make afs_mkdir() locally initialise a new directory's content
netfs: Change the read result collector to only use one work item
afs: Make {Y,}FS.FetchData an asynchronous operation
afs: Fix cleanup of immediately failed async calls
afs: Eliminate afs_read
afs: Use netfslib for symlinks, allowing them to be cached
afs: Use netfslib for directories
afs: Make afs_init_request() get a key if not given a file
netfs: Add support for caching single monolithic objects such as AFS dirs
netfs: Add functions to build/clean a buffer in a folio_queue
afs: Add more tracepoints to do with tracking validity
cachefiles: Add auxiliary data trace
cachefiles: Add some subrequest tracepoints
netfs: Remove some extraneous directory invalidations
afs: Fix directory format encoding struct
afs: Fix EEXIST error returned from afs_rmdir() to be ENOTEMPTY
...
CIFSGetSrvInodeNumber() uses SMB_QUERY_FILE_INTERNAL_INFO (0x3ee) level
which is SMB PASSTHROUGH level (>= 0x03e8). SMB PASSTHROUGH levels are
supported only when server announce CAP_INFOLEVEL_PASSTHRU.
So add guard in cifs_query_file_info() function which is the only user of
CIFSGetSrvInodeNumber() function and returns -EOPNOTSUPP when server does
not announce CAP_INFOLEVEL_PASSTHRU.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
CIFSSMBRenameOpenFile() uses SMB_SET_FILE_RENAME_INFORMATION (0x3f2) level
which is SMB PASSTHROUGH level (>= 0x03e8). SMB PASSTHROUGH levels are
supported only when server announce CAP_INFOLEVEL_PASSTHRU.
All usage of CIFSSMBRenameOpenFile() execept the one is already guarded by
checks which prevents calling it against servers without support for
CAP_INFOLEVEL_PASSTHRU.
The remaning usage without guard is in cifs_do_rename() function, so add
missing guard here.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Function CIFSSMBQuerySymLink() was renamed to cifs_query_reparse_point() in
commit ed3e0a149b ("smb: client: implement ->query_reparse_point() for
SMB1"). Remove its dead declaration from header file too.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
NT Status code is 32-bit number, so for comparing two NT Status codes is
needed to check all 32 bits, and not just low 24 bits.
Before this change kernel printed message:
"Status code returned 0x8000002d NT_STATUS_NOT_COMMITTED"
It was incorrect as because NT_STATUS_NOT_COMMITTED is defined as
0xC000002d and 0x8000002d has defined name NT_STATUS_STOPPED_ON_SYMLINK.
With this change kernel prints message:
"Status code returned 0x8000002d NT_STATUS_STOPPED_ON_SYMLINK"
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This allows cifs_print_status() to show string representation also for
these error codes.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
All fields in struct rfc1002_session_packet are in big endian. This is
because all NetBIOS packet headers are in big endian as opposite of SMB
structures which are in little endian.
Therefore use __be16 and __be32 types instead of __u16 and __u32 in
struct rfc1002_session_packet.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In all other places is used function cifs_autodisable_serverino() for
disabling CIFS_MOUNT_SERVER_INUM mount flag. So use is also in readir.c
_initiate_cifs_search() function. Benefit of cifs_autodisable_serverino()
is that it also prints dmesg message that server inode numbers are being
disabled.
Fixes: ec06aedd44 ("cifs: clean up handling when server doesn't consistently support inode numbers")
Fixes: f534dc9943 ("cifs: clear server inode number flag while autodisabling")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We had tracepoints for the return code for querying WSL EAs
(trace_smb3_query_wsl_ea_compound_err and
trace_smb3_query_wsl_ea_compound_done) but were missing one for
trace_smb3_query_wsl_ea_compound_enter.
Fixes: ea41367b2a ("smb: client: introduce SMB2_OP_QUERY_WSL_EA")
Signed-off-by: Steve French <stfrench@microsoft.com>
The tracepoints based on smb3_inf_compound_*_class have tcon id and
session id swapped around. This results in incorrect output in
`trace-cmd report`.
Fix the order of arguments to resolve this issue. The trace-cmd output
below shows the before and after of the smb3_delete_enter and
smb3_delete_done events as an example. The smb3_cmd_* events show the
correct session and tcon id for reference.
Also fix tracepoint set -> get in the SMB2_OP_GET_REPARSE case.
BEFORE:
rm-2211 [001] ..... 1839.550888: smb3_delete_enter: xid=281 sid=0x5 tid=0x3d path=\hello2.txt
rm-2211 [001] ..... 1839.550894: smb3_cmd_enter: sid=0x1ac000000003d tid=0x5 cmd=5 mid=61
rm-2211 [001] ..... 1839.550896: smb3_cmd_enter: sid=0x1ac000000003d tid=0x5 cmd=6 mid=62
rm-2211 [001] ..... 1839.552091: smb3_cmd_done: sid=0x1ac000000003d tid=0x5 cmd=5 mid=61
rm-2211 [001] ..... 1839.552093: smb3_cmd_done: sid=0x1ac000000003d tid=0x5 cmd=6 mid=62
rm-2211 [001] ..... 1839.552103: smb3_delete_done: xid=281 sid=0x5 tid=0x3d
AFTER:
rm-2501 [001] ..... 3237.656110: smb3_delete_enter: xid=88 sid=0x1ac0000000041 tid=0x5 path=\hello2.txt
rm-2501 [001] ..... 3237.656122: smb3_cmd_enter: sid=0x1ac0000000041 tid=0x5 cmd=5 mid=84
rm-2501 [001] ..... 3237.656123: smb3_cmd_enter: sid=0x1ac0000000041 tid=0x5 cmd=6 mid=85
rm-2501 [001] ..... 3237.657909: smb3_cmd_done: sid=0x1ac0000000041 tid=0x5 cmd=5 mid=84
rm-2501 [001] ..... 3237.657909: smb3_cmd_done: sid=0x1ac0000000041 tid=0x5 cmd=6 mid=85
rm-2501 [001] ..... 3237.657922: smb3_delete_done: xid=88 sid=0x1ac0000000041 tid=0x5
Cc: stable@vger.kernel.org
Signed-off-by: Ruben Devos <devosruben6@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The `smb2_symlink_err_rsp` structure was previously defined with
`ErrorContextData` as a single `__u8` byte. However, the `ErrorContextData`
field is intended to be a variable-length array based on `ErrorDataLength`.
This mismatch leads to incorrect pointer arithmetic and potential memory
access issues when processing error contexts.
Updates the `ErrorContextData` field to be a flexible array
(`__u8 ErrorContextData[]`). Additionally, it modifies the corresponding
casts in the `symlink_data()` function to properly handle the flexible
array, ensuring correct memory calculations and data handling.
These changes improve the robustness of SMB2 symlink error processing.
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Suggested-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If TCP Server is about to be destroyed (e.g. CifsExiting was set) and
it is reconnecting, stop retrying DFS targets from cached DFS referral
as this would potentially delay server shutdown in several seconds.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Return -ENOENT in parse_dfs_referrals() when server returns no targets
for a referral request as specified in
MS-DFSC 3.1.5.4.3 Receiving a Root Referral Response or Link
Referral Response:
> If the referral request is successful, but the NumberOfReferrals
> field in the referral header (as specified in section 2.2.4) is
> 0, the DFS server could not find suitable targets to return to
> the client. In this case, the client MUST fail the original I/O
> operation with STATUS_OBJECT_PATH_NOT_FOUND.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a link referral request sent to root server was successful but
client failed to connect to all link targets, there is no need to
retry same link referral on a different root server. Set an end
marker for the DFS root referral so the client will not attempt to
re-send link referrals to different root servers on failures.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some places pass hostnames rather than UNC paths to resolve them to ip
addresses, so provide helpers to handle both cases and then stop
converting hostnames to UNC paths by inserting path delimiters into
them. Also kill @expiry parameter as it's not used anywhere.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the user specified a DNS domain name in domain= mount option, then
use it instead of parsing it in NTLMSSP CHALLENGE_MESSAGE message.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Old Windows servers will return not fully qualified DFS targets by
default as specified in
MS-DFSC 3.2.5.5 Receiving a Root Referral Request or Link Referral
Request
| Servers SHOULD<30> return fully qualified DNS host names of
| targets in responses to root referral requests and link referral
| requests.
| ...
| <30> Section 3.2.5.5: By default, Windows Server 2003, Windows
| Server 2008, Windows Server 2008 R2, Windows Server 2012, and
| Windows Server 2012 R2 return DNS host names that are not fully
| qualified for targets.
Fix this by converting all NetBIOS host names from DFS targets to
FQDNs and try resolving them first if DNS domain name was provided in
NTLMSSP CHALLENGE_MESSAGE message from previous SMB2_SESSION_SETUP.
This also prevents the client from translating the DFS target
hostnames to another domain depending on the network domain search
order.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Parse FQDN of the domain in CHALLENGE_MESSAGE message as it's gonna be
useful when mounting DFS shares against old Windows Servers (2012 R2
or earlier) that return not fully qualified hostnames for DFS targets
by default.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use new helper in find_domain_name() and find_timestamp() to avoid
duplicating code.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB1 shares the mount and remount code paths with SMB2/3 and already
supports password rotation in some scenarios. This patch extends the
password rotation support to SMB1 reconnects as well.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=W51I
-----END PGP SIGNATURE-----
Merge tag '6.13-rc6-SMB3-client-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
- fix unneeded session setup retry due to stale password e.g. for DFS
automounts
* tag '6.13-rc6-SMB3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: sync the root session and superblock context passwords before automounting
In some cases, when password2 becomes the working password, the
client swaps the two password fields in the root session struct, but
not in the smb3_fs_context struct in cifs_sb. DFS automounts inherit
fs context from their parent mounts. Therefore, they might end up
getting the passwords in the stale order.
The automount should succeed, because the mount function will end up
retrying with the actual password anyway. But to reduce these
unnecessary session setup retries for automounts, we can sync the
parent context's passwords with the root session's passwords before
duplicating it to the child's fs context.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ3vs1AAKCRCRxhvAZXjc
omdqAP9Mn4HF85p5X7WRtUgrF7MGQft3EBfWE+sUxCMTc49NGQD/Ti7hqGNleEih
MmjUjLZSG1e3lFHYQm0nqmjO2RexbQ0=
=Li7D
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Relax assertions on failure to encode file handles
The ->encode_fh() method can fail for various reasons. None of them
warrant a WARN_ON().
- Fix overlayfs file handle encoding by allowing encoding an fid from
an inode without an alias
- Make sure fuse_dir_open() handles FOPEN_KEEP_CACHE. If it's not
specified fuse needs to invaludate the directory inode page cache
- Fix qnx6 so it builds with gcc-15
- Various fixes for netfslib and ceph and nfs filesystems:
- Ignore silly rename files from afs and nfs when building header
archives
- Fix read result collection in netfslib with multiple subrequests
- Handle ENOMEM for netfslib buffered reads
- Fix oops in nfs_netfs_init_request()
- Parse the secctx command immediately in cachefiles
- Remove a redundant smp_rmb() in netfslib
- Handle recursion in read retry in netfslib
- Fix clearing of folio_queue
- Fix missing cancellation of copy-to_cache when the cache for a
file is temporarly disabled in netfslib
- Sanity check the hfs root record
- Fix zero padding data issues in concurrent write scenarios
- Fix is_mnt_ns_file() after converting nsfs to path_from_stashed()
- Fix missing declaration of init_files
- Increase I/O priority when writing revoke records in jbd2
- Flush filesystem device before updating tail sequence in jbd2
* tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
ovl: support encoding fid from inode with no alias
ovl: pass realinode to ovl_encode_real_fh() instead of realdentry
fuse: respect FOPEN_KEEP_CACHE on opendir
netfs: Fix is-caching check in read-retry
netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled
netfs: Fix ceph copy to cache on write-begin
netfs: Work around recursion by abandoning retry if nothing read
netfs: Fix missing barriers by using clear_and_wake_up_bit()
netfs: Remove redundant use of smp_rmb()
cachefiles: Parse the "secctx" immediately
nfs: Fix oops in nfs_netfs_init_request() when copying to cache
netfs: Fix enomem handling in buffered reads
netfs: Fix non-contiguous donation between completed reads
kheaders: Ignore silly-rename files
fs: relax assertions on failure to encode file handles
fs: fix missing declaration of init_files
fs: fix is_mnt_ns_file()
iomap: fix zero padding data issue in concurrent append writes
iomap: pass byte granular end position to iomap_add_to_ioend
jbd2: flush filesystem device before updating tail sequence
...
The last use of is_server_using_iface() was removed in 2022 by
commit aa45dadd34 ("cifs: change iface_list from array to sorted linked
list")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Previously, deferred file handles were reused only for read
operations, this commit extends to reusing deferred handles
for write operations. By reusing these handles we can reduce
the need for open/close operations over the wire.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change the way netfslib collects read results to do all the collection for
a particular read request using a single work item that walks along the
subrequest queue as subrequests make progress or complete, unlocking folios
progressively rather than doing the unlock in parallel as parallel requests
come in.
The code is remodelled to be more like the write-side code, though only
using a single stream. This makes it more directly comparable and thus
easier to duplicate fixes between the two sides.
This has a number of advantages:
(1) It's simpler. There doesn't need to be a complex donation mechanism
to handle mismatches between the size and alignment of subrequests and
folios. The collector unlocks folios as the subrequests covering each
complete.
(2) It should cause less scheduler overhead as there's a single work item
in play unlocking pages in parallel when a read gets split up into a
lot of subrequests instead of one per subrequest.
Whilst the parallellism is nice in theory, in practice, the vast
majority of loads are sequential reads of the whole file, so
committing a bunch of threads to unlocking folios out of order doesn't
help in those cases.
(3) It should make it easier to implement content decryption. A folio
cannot be decrypted until all the requests that contribute to it have
completed - and, again, most loads are sequential and so, most of the
time, we want to begin decryption sequentially (though it's great if
the decryption can happen in parallel).
There is a disadvantage in that we're losing the ability to decrypt and
unlock things on an as-things-arrive basis which may affect some
applications.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-28-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Drop the was_async argument from netfs_read_subreq_terminated(). Almost
every caller is either in process context and passes false. Some
filesystems delegate the call to a workqueue to avoid doing the work in
their network message queue parsing thread.
The only exception is netfs_cache_read_terminated() which handles
completion in the cache - which is usually a callback from the backing
filesystem in softirq context, though it can be from process context if an
error occurred. In this case, delegate to a workqueue.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wiVC5Cgyz6QKXFu6fTaA6h4CjexDR-OV9kL6Vo5x9v8=A@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-10-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a tracepoint to log the lifespan of folio_queue structs. For tracing
illustrative purposes, folio_queues are tagged with the debug ID of
whatever they're related to (typically a netfs_io_request) and a debug ID
of their own.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-5-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
syzkaller reported recursion with a loop of three calls (netfs_rreq_assess,
netfs_retry_reads and netfs_rreq_terminated) hitting the limit of the stack
during an unbuffered or direct I/O read.
There are a number of issues:
(1) There is no limit on the number of retries.
(2) A subrequest is supposed to be abandoned if it does not transfer
anything (NETFS_SREQ_NO_PROGRESS), but that isn't checked under all
circumstances.
(3) The actual root cause, which is this:
if (atomic_dec_and_test(&rreq->nr_outstanding))
netfs_rreq_terminated(rreq, ...);
When we do a retry, we bump the rreq->nr_outstanding counter to
prevent the final cleanup phase running before we've finished
dispatching the retries. The problem is if we hit 0, we have to do
the cleanup phase - but we're in the cleanup phase and end up
repeating the retry cycle, hence the recursion.
Work around the problem by limiting the number of retries. This is based
on Lizhi Xu's patch[1], and makes the following changes:
(1) Replace NETFS_SREQ_NO_PROGRESS with NETFS_SREQ_MADE_PROGRESS and make
the filesystem set it if it managed to read or write at least one byte
of data. Clear this bit before issuing a subrequest.
(2) Add a ->retry_count member to the subrequest and increment it any time
we do a retry.
(3) Remove the NETFS_SREQ_RETRYING flag as it is superfluous with
->retry_count. If the latter is non-zero, we're doing a retry.
(4) Abandon a subrequest if retry_count is non-zero and we made no
progress.
(5) Use ->retry_count in both the write-side and the read-size.
[?] Question: Should I set a hard limit on retry_count in both read and
write? Say it hits 50, we always abandon it. The problem is that
these changes only mitigate the issue. As long as it made at least one
byte of progress, the recursion is still an issue. This patch
mitigates the problem, but does not fix the underlying cause. I have
patches that will do that, but it's an intrusive fix that's currently
pending for the next merge window.
The oops generated by KASAN looks something like:
BUG: TASK stack guard page was hit at ffffc9000482ff48 (stack is ffffc90004830000..ffffc90004838000)
Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN NOPTI
...
RIP: 0010:mark_lock+0x25/0xc60 kernel/locking/lockdep.c:4686
...
mark_usage kernel/locking/lockdep.c:4646 [inline]
__lock_acquire+0x906/0x3ce0 kernel/locking/lockdep.c:5156
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825
local_lock_acquire include/linux/local_lock_internal.h:29 [inline]
___slab_alloc+0x123/0x1880 mm/slub.c:3695
__slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908
__slab_alloc_node mm/slub.c:3961 [inline]
slab_alloc_node mm/slub.c:4122 [inline]
kmem_cache_alloc_noprof+0x2a7/0x2f0 mm/slub.c:4141
radix_tree_node_alloc.constprop.0+0x1e8/0x350 lib/radix-tree.c:253
idr_get_free+0x528/0xa40 lib/radix-tree.c:1506
idr_alloc_u32+0x191/0x2f0 lib/idr.c:46
idr_alloc+0xc1/0x130 lib/idr.c:87
p9_tag_alloc+0x394/0x870 net/9p/client.c:321
p9_client_prepare_req+0x19f/0x4d0 net/9p/client.c:644
p9_client_zc_rpc.constprop.0+0x105/0x880 net/9p/client.c:793
p9_client_read_once+0x443/0x820 net/9p/client.c:1570
p9_client_read+0x13f/0x1b0 net/9p/client.c:1534
v9fs_issue_read+0x115/0x310 fs/9p/vfs_addr.c:74
netfs_retry_read_subrequests fs/netfs/read_retry.c:60 [inline]
netfs_retry_reads+0x153a/0x1d00 fs/netfs/read_retry.c:232
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
...
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235
netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371
netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407
netfs_dispatch_unbuffered_reads fs/netfs/direct_read.c:103 [inline]
netfs_unbuffered_read fs/netfs/direct_read.c:127 [inline]
netfs_unbuffered_read_iter_locked+0x12f6/0x19b0 fs/netfs/direct_read.c:221
netfs_unbuffered_read_iter+0xc5/0x100 fs/netfs/direct_read.c:256
v9fs_file_read_iter+0xbf/0x100 fs/9p/vfs_file.c:361
do_iter_readv_writev+0x614/0x7f0 fs/read_write.c:832
vfs_readv+0x4cf/0x890 fs/read_write.c:1025
do_preadv fs/read_write.c:1142 [inline]
__do_sys_preadv fs/read_write.c:1192 [inline]
__se_sys_preadv fs/read_write.c:1187 [inline]
__x64_sys_preadv+0x22d/0x310 fs/read_write.c:1187
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Closes: https://syzkaller.appspot.com/bug?extid=1fc6f64c40a9d143cfb6
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241108034020.3695718-1-lizhi.xu@windriver.com/ [1]
Link: https://lore.kernel.org/r/20241213135013.2964079-9-dhowells@redhat.com
Tested-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com
Suggested-by: Lizhi Xu <lizhi.xu@windriver.com>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Reported-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
With recent netfs apis changes, the bytes written
value was not getting updated in /proc/fs/cifs/Stats.
Fix this by updating tcon->bytes in write operations.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit ef7134c7fc ("smb: client: Fix use-after-free of network namespace.")
fixed a netns UAF by manually enabled socket refcounting
(sk->sk_net_refcnt=1 and sock_inuse_add(net, 1)).
The reason the patch worked for that bug was because we now hold
references to the netns (get_net_track() gets a ref internally)
and they're properly released (internally, on __sk_destruct()),
but only because sk->sk_net_refcnt was set.
Problem:
(this happens regardless of CONFIG_NET_NS_REFCNT_TRACKER and regardless
if init_net or other)
Setting sk->sk_net_refcnt=1 *manually* and *after* socket creation is not
only out of cifs scope, but also technically wrong -- it's set conditionally
based on user (=1) vs kernel (=0) sockets. And net/ implementations
seem to base their user vs kernel space operations on it.
e.g. upon TCP socket close, the TCP timers are not cleared because
sk->sk_net_refcnt=1:
(cf. commit 151c9c724d ("tcp: properly terminate timers for kernel sockets"))
net/ipv4/tcp.c:
void tcp_close(struct sock *sk, long timeout)
{
lock_sock(sk);
__tcp_close(sk, timeout);
release_sock(sk);
if (!sk->sk_net_refcnt)
inet_csk_clear_xmit_timers_sync(sk);
sock_put(sk);
}
Which will throw a lockdep warning and then, as expected, deadlock on
tcp_write_timer().
A way to reproduce this is by running the reproducer from ef7134c7fc
and then 'rmmod cifs'. A few seconds later, the deadlock/lockdep
warning shows up.
Fix:
We shouldn't mess with socket internals ourselves, so do not set
sk_net_refcnt manually.
Also change __sock_create() to sock_create_kern() for explicitness.
As for non-init_net network namespaces, we deal with it the best way
we can -- hold an extra netns reference for server->ssocket and drop it
when it's released. This ensures that the netns still exists whenever
we need to create/destroy server->ssocket, but is not directly tied to
it.
Fixes: ef7134c7fc ("smb: client: Fix use-after-free of network namespace.")
Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Repeating automatically selected options in Kconfig files is redundant, so
let's delete repeated "select NETFS_SUPPORT" that was added accidentally.
Fixes: 69c3c023af ("cifs: Implement netfslib hooks")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace default hardcoded value for cifsAttrs with ATTR_ARCHIVE macro
Use SMB2_LEASE_KEY_SIZE macro for leasekey size in smb2_lease_break
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Steve French <stfrench@microsoft.com>
The cifs_io_request struct (a wrapper around netfs_io_request) holds open
the file on the server, even beyond the local Linux file being closed.
This can cause problems with Windows-based filesystems as the file's name
still exists after deletion until the file is closed, preventing the parent
directory from being removed and causing spurious test failures in xfstests
due to inability to remove a directory. The symptom looks something like
this in the test output:
rm: cannot remove '/mnt/scratch/test/p0/d3': Directory not empty
rm: cannot remove '/mnt/scratch/test/p1/dc/dae': Directory not empty
Fix this by waiting in unlink and rename for any outstanding I/O requests
to be completed on the target file before removing that file.
Note that this doesn't prevent Linux from trying to start new requests
after deletion if it still has the file open locally - something that's
perfectly acceptable on a UNIX system.
Note also that whilst I've marked this as fixing the commit to make cifs
use netfslib, I don't know that it won't occur before that.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
utf8s_to_utf16s() specifies pwcs as a wchar_t pointer (whether big endian
or little endian is passed in as an additional parm), so to remove a
distracting compile warning it needs to be cast as (wchar_t *) in
parse_reparse_wsl_symlink() as done by other callers.
Fixes: 06a7adf318 ("cifs: Add support for parsing WSL-style symlinks")
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
dfs_cache_refresh() delayed worker could race with cifs_put_tcon(), so
make sure to call list_replace_init() on @tcon->dfs_ses_list after
kworker is cancelled or finished.
Fixes: 4f42a8b54b ("smb: client: fix DFS interlink failover")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers which implement the SMB3.1.1 POSIX extensions did not
set the file type in the mode in the infolevel 100 response.
With the recent changes for checking the file type via the mode field,
this can cause the root directory to be reported incorrectly and
mounts (e.g. to ksmbd) to fail.
Fixes: 6a832bc8bb ("fs/smb/client: Implement new SMB3 POSIX type")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Spares an extra revalidation request
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Avoid extra roundtrip
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Unlock before returning if smb3_sync_session_ctx_passwords() fails.
Fixes: 7e654ab7da03 ("cifs: during remount, make sure passwords are in sync")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes scenarios where remount can overwrite the only currently
working password, breaking reconnect.
We recently introduced a password2 field in both ses and ctx structs.
This was done so as to allow the client to rotate passwords for a mount
without any downtime. However, when the client transparently handles
password rotation, it can swap the values of the two password fields
in the ses struct, but not in smb3_fs_context struct that hangs off
cifs_sb. This can lead to a situation where a remount unintentionally
overwrites a working password in the ses struct.
In order to fix this, we first get the passwords in ctx struct
in-sync with ses struct, before replacing them with what the passwords
that could be passed as a part of remount.
Also, in order to avoid race condition between smb2_reconnect and
smb3_reconfigure, we make sure to lock session_mutex before changing
password and password2 fields of the ses structure.
Fixes: 35f834265e ("smb3: fix broken reconnect when password changing on the server by allowing password rotation")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes the case for example where the password specified on mount is a
recently expired password, but password2 is valid. Without this patch
this mount scenario would fail.
This patch introduces the following changes to support password rotation on
mount:
1. If an existing session is not found and the new session setup results in
EACCES, EKEYEXPIRED or EKEYREVOKED, swap password and password2 (if
available), and retry the mount.
2. To match the new mount with an existing session, add conditions to check
if a) password and password2 of the new mount and the existing session are
the same, or b) password of the new mount is the same as the password2 of
the existing session, and password2 of the new mount is the same as the
password of the existing session.
3. If an existing session is found, but needs reconnect, retry the session
setup after swapping password and password2 (if available), in case the
previous attempt results in EACCES, EKEYEXPIRED or EKEYREVOKED.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Avoid leaking a tcon ref when a lease break races with opening the
cached directory. Processing the leak break might take a reference to
the tcon in cached_dir_lease_break() and then fail to release the ref in
cached_dir_offload_close, since cfid->tcon is still NULL.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can
race with various cached directory operations, which ultimately results
in dentries not being dropped and these kernel BUGs:
BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
------------[ cut here ]------------
kernel BUG at fs/super.c:661!
This happens when a cfid is in the process of being cleaned up when, and
has been removed from the cfids->entries list, including:
- Receiving a lease break from the server
- Server reconnection triggers invalidate_all_cached_dirs(), which
removes all the cfids from the list
- The laundromat thread decides to expire an old cfid.
To solve these problems, dropping the dentry is done in queued work done
in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs()
flushes that workqueue after it drops all the dentries of which it's
aware. This is a global workqueue (rather than scoped to a mount), but
the queued work is minimal.
The final cleanup work for cleaning up a cfid is performed via work
queued in the serverclose_wq workqueue; this is done separate from
dropping the dentries so that close_all_cached_dirs() doesn't block on
any server operations.
Both of these queued works expect to invoked with a cfid reference and
a tcon reference to avoid those objects from being freed while the work
is ongoing.
While we're here, add proper locking to close_all_cached_dirs(), and
locking around the freeing of cfid->dentry.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the client unconditionally attempts to get an DFS referral to
check if share is DFS, some servers may return different errors that
aren't handled in smb2_get_dfs_refer(), so the following will be
logged in dmesg:
CIFS: VFS: \\srv\IPC$ smb2_get_dfs_refer: ioctl error...
which can confuse some users while mounting an SMB share.
Fix this by logging such error with FYI.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can't properly support chasing DFS links in cifs_tree_connect()
because
(1) We don't support creating new sessions while we're reconnecting,
which would be required for DFS interlinks.
(2) ->is_path_accessible() can't be called from cifs_tree_connect()
as it would deadlock with smb2_reconnect(). This is required for
checking if new DFS target is a nested DFS link.
By unconditionally trying to get an DFS referral from new DFS target
isn't correct because if the new DFS target (interlink) is an DFS
standalone namespace, then we would end up getting -ELOOP and then
potentially leaving tcon disconnected.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_tree_connect() no longer uses ioctl, so allow sessions to be
reconnected when sending ioctls.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can access local_nls directly from @tcon->ses, so there is no need
to pass it as parameter in cifs_tree_connect().
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In some DFS setups, a single DFS share may contain hundreds of DFS
links and increasing the DFS cache to allow more referrals to be
cached improves DFS failover as the client will likely find a cached
DFS referral when reconnecting and then avoiding unnecessary remounts.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB1 NT_TRANSACT_IOCTL/FSCTL_GET_REPARSE_POINT even in non-UNICODE mode
returns reparse buffer in UNICODE/UTF-16 format.
This is because FSCTL_GET_REPARSE_POINT is NT-based IOCTL which does not
distinguish between 8-bit non-UNICODE and 16-bit UNICODE modes and its path
buffers are always encoded in UTF-16.
This change fixes reading of native symlinks in SMB1 when UNICODE session
is not active.
Fixes: ed3e0a149b ("smb: client: implement ->query_reparse_point() for SMB1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
WSL socket, fifo, char and block devices have empty reparse buffer.
Validate the length of the reparse buffer.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
$LXDEV xattr is for storing block/char device's major and minor number.
Change guard which excludes storing $LXDEV xattr to explicitly filter
everything except block and char device. Current guard is opposite, which
is currently correct but is less-safe. This change is required for adding
support for creating WSL-style symlinks as symlinks also do not use
device's major and minor numbers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linux CIFS client currently does not implement readlink() for WSL-style
symlinks. It is only able to detect that file is of WSL-style symlink, but
is not able to read target symlink location.
Add this missing functionality and implement support for parsing content of
WSL-style symlink.
The important note is that symlink target location stored for WSL symlink
reparse point (IO_REPARSE_TAG_LX_SYMLINK) is in UTF-8 encoding instead of
UTF-16 (which is used in whole SMB protocol and also in all other symlink
styles). So for proper locale/cp support it is needed to do conversion from
UTF-8 to local_nls.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Check that path buffer has correct length (it is non-zero and in UNICODE
mode it has even number of bytes) and check that buffer does not contain
null character (UTF-16 null codepoint in UNICODE mode or null byte in
non-unicode mode) because Linux cannot process symlink with null byte.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB symlink which has SYMLINK_FLAG_RELATIVE set is relative (as opposite of
the absolute) and it can be relative either to the current directory (where
is the symlink stored) or relative to the top level export path. To what it
is relative depends on the first character of the symlink target path.
If the first character is path separator then symlink is relative to the
export, otherwise to the current directory. Linux (and generally POSIX
systems) supports only symlink paths relative to the current directory
where is symlink stored.
Currently if Linux SMB client reads relative SMB symlink with first
character as path separator (slash), it let as is. Which means that Linux
interpret it as absolute symlink pointing from the root (/). But this
location is different than the top level directory of SMB export (unless
SMB export was mounted to the root) and thefore SMB symlinks relative to
the export are interpreted wrongly by Linux SMB client.
Fix this problem. As Linux does not have equivalent of the path relative to
the top of the mount point, convert such symlink target path relative to
the current directory. Do this by prepending "../" pattern N times before
the SMB target path, where N is the number of path separators found in SMB
symlink path.
So for example, if SMB share is mounted to Linux path /mnt/share/, symlink
is stored in file /mnt/share/test/folder1/symlink (so SMB symlink path is
test\folder1\symlink) and SMB symlink target points to \test\folder2\file,
then convert symlink target path to Linux path ../../test/folder2/file.
Deduplicate code for parsing SMB symlinks in native form from functions
smb2_parse_symlink_response() and parse_reparse_native_symlink() into new
function smb2_parse_native_symlink() and pass into this new function a new
full_path parameter from callers, which specify SMB full path where is
symlink stored.
This change fixes resolving of the native Windows symlinks relative to the
top level directory of the SMB share.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 8da33fd11c ("cifs: avoid deadlocks while updating iface")
cifs_chan_update_iface now takes the chan_lock itself, so update the
comment accordingly.
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change return value from -ENOENT to -EOPNOTSUPP to maintain consistency
with the return value of open_cached_dir() for the same case. This
change is safe as the only calling function does not differentiate
between these return values.
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Setting dir_cache_timeout to zero should disable the caching of
directory contents. Currently, even when dir_cache_timeout is zero,
some caching related functions are still invoked, which is unintended
behavior.
Fix the issue by setting tcon->nohandlecache to true when
dir_cache_timeout is zero, ensuring that directory handle caching
is properly disabled.
Fixes: 238b351d09 ("smb3: allow controlling length of time directory entries are cached with dir leases")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Checks inside open_cached_dir() can be removed because if dir caching is
disabled then tcon->cfids is necessarily NULL. Therefore, all other checks
are redundant.
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=K4Ai
-----END PGP SIGNATURE-----
Merge tag '6.13-rc-part1-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix two SMB3.1.1 POSIX Extensions problems
- Fixes for special file handling (symlinks and FIFOs)
- Improve compounding
- Four cleanup patches
- Fix use after free in signing
- Add support for handling namespaces for reconnect related upcalls
(e.g. for DNS names resolution and auth)
- Fix various directory lease problems (directory entry caching),
including some important potential use after frees
* tag '6.13-rc-part1-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: prevent use-after-free due to open_cached_dir error paths
smb: Don't leak cfid when reconnect races with open_cached_dir
smb: client: handle max length for SMB symlinks
smb: client: get rid of bounds check in SMB2_ioctl_init()
smb: client: improve compound padding in encryption
smb3: request handle caching when caching directories
cifs: Recognize SFU char/block devices created by Windows NFS server on Windows Server <<2012
CIFS: New mount option for cifs.upcall namespace resolution
smb/client: Prevent error pointer dereference
fs/smb/client: implement chmod() for SMB3 POSIX Extensions
smb: cached directories can be more than root file handle
smb: client: fix use-after-free of signing key
smb: client: Use str_yes_no() helper function
smb: client: memcpy() with surrounding object base address
cifs: Remove pre-historic unused CIFSSMBCopy
If open_cached_dir() encounters an error parsing the lease from the
server, the error handling may race with receiving a lease break,
resulting in open_cached_dir() freeing the cfid while the queued work is
pending.
Update open_cached_dir() to drop refs rather than directly freeing the
cfid.
Have cached_dir_lease_break(), cfids_laundromat_worker(), and
invalidate_all_cached_dirs() clear has_lease immediately while still
holding cfids->cfid_list_lock, and then use this to also simplify the
reference counting in cfids_laundromat_worker() and
invalidate_all_cached_dirs().
Fixes this KASAN splat (which manually injects an error and lease break
in open_cached_dir()):
==================================================================
BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0
Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65
CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Workqueue: cifsiod smb2_cached_lease_break
Call Trace:
<TASK>
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x660
kasan_report+0xd3/0x110
smb2_cached_lease_break+0x27/0xb0
process_one_work+0x50a/0xc50
worker_thread+0x2ba/0x530
kthread+0x17c/0x1c0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
open_cached_dir+0xa7d/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x51/0x70
kfree+0x174/0x520
open_cached_dir+0x97f/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Last potentially related work creation:
kasan_save_stack+0x33/0x60
__kasan_record_aux_stack+0xad/0xc0
insert_work+0x32/0x100
__queue_work+0x5c9/0x870
queue_work_on+0x82/0x90
open_cached_dir+0x1369/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff88811cc24c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 16 bytes inside of
freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000)
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can't use PATH_MAX for SMB symlinks because
(1) Windows Server will fail FSCTL_SET_REPARSE_POINT with
STATUS_IO_REPARSE_DATA_INVALID when input buffer is larger than
16K, as specified in MS-FSA 2.1.5.10.37.
(2) The client won't be able to parse large SMB responses that
includes SMB symlink path within SMB2_CREATE or SMB2_IOCTL
responses.
Fix this by defining a maximum length value (4060) for SMB symlinks
that both client and server can handle.
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_set_next_command() no longer squashes request iovs into a single
iov, so the bounds check can be dropped.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After commit f7f291e14d ("cifs: fix oops during encryption"), the
encryption layer can handle vmalloc'd buffers as well as kmalloc'd
buffers, so there is no need to inefficiently squash request iovs
into a single one to handle padding in compound requests.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This client was only requesting READ caching, not READ and HANDLE caching
in the LeaseState on the open requests we send for directories. To
delay closing a handle (e.g. for caching directory contents) we should
be requesting HANDLE as well as READ (as we already do for deferred
close of files). See MS-SMB2 3.3.1.4 e.g.
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows NFS server versions on Windows Server older than 2012 release use
for storing char and block devices modified SFU format, not compatible with
the original SFU. Windows NFS server on Windows Server 2012 and new
versions use different format (reparse points), not related to SFU-style.
SFU / SUA / Interix subsystem stores the major and major numbers as pair of
64-bit integer, but Windows NFS server stores as pair of 32-bit integers.
Which makes char and block devices between Windows NFS server <<2012 and
Windows SFU/SUA/Interix subsytem incompatible.
So improve Linux SMB client.
When SFU mode is enabled (mount option -o sfu is specified) then recognize
also these kind of char and block devices and its major and minor numbers,
which are used by Windows Server versions older than 2012.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the current implementation, the SMB filesystem on a mount point can
trigger upcalls from the kernel to the userspace to enable certain
functionalities like spnego, dns_resolution, amongst others. These upcalls
usually either happen in the context of the mount or in the context of an
application/user. The upcall handler for cifs, cifs.upcall already has
existing code which switches the namespaces to the caller's namespace
before handling the upcall. This behaviour is expected for scenarios like
multiuser mounts, but might not cover all single user scenario with
services such as Kubernetes, where the mount can happen from different
locations such as on the host, from an app container, or a driver pod
which does the mount on behalf of a different pod.
This patch introduces a new mount option called upcall_target, to
customise the upcall behaviour. upcall_target can take 'mount' and 'app'
as possible values. This aids use cases like Kubernetes where the mount
happens on behalf of the application in another container altogether.
Having this new mount option allows the mount command to specify where the
upcall should happen: 'mount' for resolving the upcall to the host
namespace, and 'app' for resolving the upcall to the ns of the calling
thread. This will enable both the scenarios where the Kerberos credentials
can be found on the application namespace or the host namespace to which
just the mount operation is "delegated".
Reviewed-by: Shyam Prasad <shyam.prasad@microsoft.com>
Reviewed-by: Bharath S M <bharathsm@microsoft.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The cifs_sb_tlink() function can return error pointers, but this code
dereferences it before checking for error pointers. Re-order the code
to fix that.
Fixes: 0f9b6b045bb2 ("fs/smb/client: implement chmod() for SMB3 POSIX Extensions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The NT ACL format for an SMB3 POSIX Extensions chmod() is a single ACE with the
magic S-1-5-88-3-mode SID:
NT Security Descriptor
Revision: 1
Type: 0x8004, Self Relative, DACL Present
Offset to owner SID: 56
Offset to group SID: 124
Offset to SACL: 0
Offset to DACL: 20
Owner: S-1-5-21-3177838999-3893657415-1037673384-1000
Group: S-1-22-2-1000
NT User (DACL) ACL
Revision: NT4 (2)
Size: 36
Num ACEs: 1
NT ACE: S-1-5-88-3-438, flags 0x00, Access Allowed, mask 0x00000000
Type: Access Allowed
NT ACE Flags: 0x00
Size: 28
Access required: 0x00000000
SID: S-1-5-88-3-438
Owner and Group should be NULL, but the server is not required to fail the
request if they are present.
Signed-off-by: Ralph Boehme <slow@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Update this log message since cached fids may represent things other
than the root of a mount.
Fixes: e4029e0726 ("cifs: find and use the dentry for cached non-root directories also")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
Customers have reported use-after-free in @ses->auth_key.response with
SMB2.1 + sign mounts which occurs due to following race:
task A task B
cifs_mount()
dfs_mount_share()
get_session()
cifs_mount_get_session() cifs_send_recv()
cifs_get_smb_ses() compound_send_recv()
cifs_setup_session() smb2_setup_request()
kfree_sensitive() smb2_calc_signature()
crypto_shash_setkey() *UAF*
Fix this by ensuring that we have a valid @ses->auth_key.response by
checking whether @ses->ses_status is SES_GOOD or SES_EXITING with
@ses->ses_lock held. After commit 24a9799aa8 ("smb: client: fix UAF
in smb2_reconnect_server()"), we made sure to call ->logoff() only
when @ses was known to be good (e.g. valid ->auth_key.response), so
it's safe to access signing key when @ses->ses_status == SES_EXITING.
Cc: stable@vger.kernel.org
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Steve French <stfrench@microsoft.com>
Like commit f1f047bd7c ("smb: client: Fix -Wstringop-overflow issues"),
adjust the memcpy() destination address to be based off the surrounding
object rather than based off the 4-byte "Protocol" member. This avoids a
build-time warning when compiling under CONFIG_FORTIFY_SOURCE with GCC 15:
In function 'fortify_memcpy_chk',
inlined from 'CIFSSMBSetPathInfo' at ../fs/smb/client/cifssmb.c:5358:2:
../include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
571 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
CIFSSMBCopy() is unused, remove it.
It seems to have been that way pre-git; looking in a historic
archive, I think it landed around May 2004 in Linus'
BKrev: 40ab7591J_OgkpHW-qhzZukvAUAw9g
and was unused back then.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Recently, we got a customer report that CIFS triggers oops while
reconnecting to a server. [0]
The workload runs on Kubernetes, and some pods mount CIFS servers
in non-root network namespaces. The problem rarely happened, but
it was always while the pod was dying.
The root cause is wrong reference counting for network namespace.
CIFS uses kernel sockets, which do not hold refcnt of the netns that
the socket belongs to. That means CIFS must ensure the socket is
always freed before its netns; otherwise, use-after-free happens.
The repro steps are roughly:
1. mount CIFS in a non-root netns
2. drop packets from the netns
3. destroy the netns
4. unmount CIFS
We can reproduce the issue quickly with the script [1] below and see
the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled.
When the socket is TCP, it is hard to guarantee the netns lifetime
without holding refcnt due to async timers.
Let's hold netns refcnt for each socket as done for SMC in commit
9744d2bf19 ("smc: Fix use-after-free in tcp_write_timer_handler().").
Note that we need to move put_net() from cifs_put_tcp_session() to
clean_demultiplex_info(); otherwise, __sock_create() still could touch a
freed netns while cifsd tries to reconnect from cifs_demultiplex_thread().
Also, maybe_get_net() cannot be put just before __sock_create() because
the code is not under RCU and there is a small chance that the same
address happened to be reallocated to another netns.
[0]:
CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting...
CIFS: Serverclose failed 4 times, giving up
Unable to handle kernel paging request at virtual address 14de99e461f84a07
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[14de99e461f84a07] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs
CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1
Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fib_rules_lookup+0x44/0x238
lr : __fib_lookup+0x64/0xbc
sp : ffff8000265db790
x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01
x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580
x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500
x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002
x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294
x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0
x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500
Call trace:
fib_rules_lookup+0x44/0x238
__fib_lookup+0x64/0xbc
ip_route_output_key_hash_rcu+0x2c4/0x398
ip_route_output_key_hash+0x60/0x8c
tcp_v4_connect+0x290/0x488
__inet_stream_connect+0x108/0x3d0
inet_stream_connect+0x50/0x78
kernel_connect+0x6c/0xac
generic_ip_connect+0x10c/0x6c8 [cifs]
__reconnect_target_unlocked+0xa0/0x214 [cifs]
reconnect_dfs_server+0x144/0x460 [cifs]
cifs_reconnect+0x88/0x148 [cifs]
cifs_readv_from_socket+0x230/0x430 [cifs]
cifs_read_from_socket+0x74/0xa8 [cifs]
cifs_demultiplex_thread+0xf8/0x704 [cifs]
kthread+0xd0/0xd4
Code: aa0003f8 f8480f13 eb18027f 540006c0 (b9401264)
[1]:
CIFS_CRED="/root/cred.cifs"
CIFS_USER="Administrator"
CIFS_PASS="Password"
CIFS_IP="X.X.X.X"
CIFS_PATH="//${CIFS_IP}/Users/Administrator/Desktop/CIFS_TEST"
CIFS_MNT="/mnt/smb"
DEV="enp0s3"
cat <<EOF > ${CIFS_CRED}
username=${CIFS_USER}
password=${CIFS_PASS}
domain=EXAMPLE.COM
EOF
unshare -n bash -c "
mkdir -p ${CIFS_MNT}
ip netns attach root 1
ip link add eth0 type veth peer veth0 netns root
ip link set eth0 up
ip -n root link set veth0 up
ip addr add 192.168.0.2/24 dev eth0
ip -n root addr add 192.168.0.1/24 dev veth0
ip route add default via 192.168.0.1 dev eth0
ip netns exec root sysctl net.ipv4.ip_forward=1
ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE
mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1
touch ${CIFS_MNT}/a.txt
ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE
"
umount ${CIFS_MNT}
[2]:
ref_tracker: net notrefcnt@000000004bbc008d has 1/1 users at
sk_alloc (./include/net/net_namespace.h:339 net/core/sock.c:2227)
inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1576)
generic_ip_connect (fs/smb/client/connect.c:3075)
cifs_get_tcp_session.part.0 (fs/smb/client/connect.c:3160 fs/smb/client/connect.c:1798)
cifs_mount_get_session (fs/smb/client/trace.h:959 fs/smb/client/connect.c:3366)
dfs_mount_share (fs/smb/client/dfs.c:63 fs/smb/client/dfs.c:285)
cifs_mount (fs/smb/client/connect.c:3622)
cifs_smb3_do_mount (fs/smb/client/cifsfs.c:949)
smb3_get_tree (fs/smb/client/fs_context.c:784 fs/smb/client/fs_context.c:802 fs/smb/client/fs_context.c:794)
vfs_get_tree (fs/super.c:1800)
path_mount (fs/namespace.c:3508 fs/namespace.c:3834)
__x64_sys_mount (fs/namespace.c:3848 fs/namespace.c:4057 fs/namespace.c:4034 fs/namespace.c:4034)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Fixes: 26abe14379 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
fdput() moved past mnt_drop_file_write(); harmless, if somewhat cringeworthy.
Reordering could be avoided either by adding an explicit scope or by making
mnt_drop_file_write() called via __cleanup.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'.
Fixes: edea94a697 ("cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: David Howells <dhowells@redhat.com
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb3_reconfigure(), after duplicating ctx->password and
ctx->password2 with kstrdup(), we need to check for allocation
failures.
If ses->password allocation fails, return -ENOMEM.
If ses->password2 allocation fails, free ses->password, set it
to NULL, and return -ENOMEM.
Fixes: c1eb537bf4 ("cifs: allow changing password during remount")
Reviewed-by: David Howells <dhowells@redhat.com
Signed-off-by: Haoxiang Li <make24@iscas.ac.cn>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_ses_find_chan() has been unused since commit
f486ef8e20 ("cifs: use the chans_need_reconnect bitmap for reconnect status")
cifs_read_page_from_socket() has been unused since commit
d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
cifs_chan_in_reconnect() has been unused since commit
bc962159e8 ("cifs: avoid race conditions with parallel reconnects")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The if condition in collect_sample: can never be satisfied
because of a logical contradiction. The indicated dead code
may have performed some action; that action will never occur.
Fixes: 94ae8c3fee ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: Advait Dhamorikar <advaitdhamorikar@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When using encryption, either enforced by the server or when using
'seal' mount option, the client will squash all compound request buffers
down for encryption into a single iov in smb2_set_next_command().
SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the
SMB2_IOCTL request in the first iov, and if the user passes an input
buffer that is greater than 328 bytes, smb2_set_next_command() will
end up writing off the end of @rqst->iov[0].iov_base as shown below:
mount.cifs //srv/share /mnt -o ...,seal
ln -s $(perl -e "print('a')for 1..1024") /mnt/link
BUG: KASAN: slab-out-of-bounds in
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
Write of size 4116 at addr ffff8881148fcab8 by task ln/859
CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
print_report+0x156/0x4d9
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
? __virt_addr_valid+0x145/0x310
? __phys_addr+0x46/0x90
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_report+0xda/0x110
? smb2_set_next_command.cold+0x1d6/0x24c [cifs]
kasan_check_range+0x10f/0x1f0
__asan_memcpy+0x3c/0x60
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
smb2_compound_op+0x238c/0x3840 [cifs]
? kasan_save_track+0x14/0x30
? kasan_save_free_info+0x3b/0x70
? vfs_symlink+0x1a1/0x2c0
? do_symlinkat+0x108/0x1c0
? __pfx_smb2_compound_op+0x10/0x10 [cifs]
? kmem_cache_free+0x118/0x3e0
? cifs_get_writable_path+0xeb/0x1a0 [cifs]
smb2_get_reparse_inode+0x423/0x540 [cifs]
? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs]
? rcu_is_watching+0x20/0x50
? __kmalloc_noprof+0x37c/0x480
? smb2_create_reparse_symlink+0x257/0x490 [cifs]
? smb2_create_reparse_symlink+0x38f/0x490 [cifs]
smb2_create_reparse_symlink+0x38f/0x490 [cifs]
? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs]
? find_held_lock+0x8a/0xa0
? hlock_class+0x32/0xb0
? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs]
cifs_symlink+0x24f/0x960 [cifs]
? __pfx_make_vfsuid+0x10/0x10
? __pfx_cifs_symlink+0x10/0x10 [cifs]
? make_vfsgid+0x6b/0xc0
? generic_permission+0x96/0x2d0
vfs_symlink+0x1a1/0x2c0
do_symlinkat+0x108/0x1c0
? __pfx_do_symlinkat+0x10/0x10
? strncpy_from_user+0xaa/0x160
__x64_sys_symlinkat+0xb9/0xf0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08d75c13bb
Reported-by: David Howells <dhowells@redhat.com>
Fixes: e77fe73c7e ("cifs: we can not use small padding iovs together with encryption")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Clang static checker(scan-build) warning：
fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory.
1304 | kfree(ea);
| ^~~~~~~~~
There is a double free in such case:
'ea is initialized to NULL' -> 'first successful memory allocation for
ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea'
-> 'goto replay_again' -> 'second goto sea_exit before allocate memory
for ea' -> 'second memory release for ea resulted in double free'.
Re-initialie 'ea' to NULL near to the replay_again label, it can fix this
double free problem.
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Calling 'ln -s . symlink' or 'ln -s .. symlink' creates symlink pointing to
some object name which ends with U+F029 unicode codepoint. This is because
trailing dot in the object name is replaced by non-ASCII unicode codepoint.
So Linux SMB client currently is not able to create native symlink pointing
to current or parent directory on Windows SMB server which can be read by
either on local Windows server or by any other SMB client which does not
implement compatible-reverse character replacement.
Fix this problem in cifsConvertToUTF16() function which is doing that
character replacement. Function comment already says that it does not need
to handle special cases '.' and '..', but after introduction of native
symlinks in reparse point form, this handling is needed.
Note that this change depends on the previous change
"cifs: Improve creating native symlinks pointing to directory".
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB protocol for native symlinks distinguish between symlink to directory
and symlink to file. These two symlink types cannot be exchanged, which
means that symlink of file type pointing to directory cannot be resolved at
all (and vice-versa).
Windows follows this rule for local filesystems (NTFS) and also for SMB.
Linux SMB client currenly creates all native symlinks of file type. Which
means that Windows (and some other SMB clients) cannot resolve symlinks
pointing to directory created by Linux SMB client.
As Linux system does not distinguish between directory and file symlinks,
its API does not provide enough information for Linux SMB client during
creating of native symlinks.
Add some heuristic into the Linux SMB client for choosing the correct
symlink type during symlink creation. Check if the symlink target location
ends with slash, or last path component is dot or dot-dot, and check if the
target location on SMB share exists and is a directory. If at least one
condition is truth then create a new SMB symlink of directory type.
Otherwise create it as file type symlink.
This change improves interoperability with Windows systems. Windows systems
would be able to resolve more SMB symlinks created by Linux SMB client
which points to existing directory.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmb+z50ACgkQiiy9cAdy
T1FS9Av+N4943ciID42gNZEL/33t+NuNymFHDeC1H4txMNEi6MZXb+H4HFQMCF22
ZWdb1IIUJ7dUjfX68hD+sIs7o+QsCUIGriyNLZvlg7xo7NIBXED2UVmWfLeiQZyh
DVhCC62vVCYCvvyrlLMBKuTIM/mNzRe7JUTpFBN+wiiakLAgf5G/9ifoFyC6cmA3
854V3z5644WM2mPOsLxWr0CkV+pELRWwgvWeMcHXnjjrljjIi6jpCX2jthkEJgkR
6rcFYwfnS74VqfzjZl7sMD4Oc/blaTuNjj0iwZz5ThJMUIN6p/RzUvSN+2qySPqJ
7ENhcElJwr9lslDfL7X412bLRAhma+vduofHW9IPNvD3Q3okXQDBZ/FRHx5q+mZR
ziBFCFT/OrotSSy8MZGOl7tD1bs29B1R98hO91qGUzo/rhzNzM93DiGAgYDxVLRE
/cw08lQzkFn468MIKHrXV3qKLqAN4Wp8h2tZ80oNAMjc3MwELoKzE5pljQc8vhVI
Oh3qN8IE
=Ky9w
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- statfs fix (e.g. when limited access to root directory of share)
- special file handling fixes: fix packet validation to avoid buffer
overflow for reparse points, fixes for symlink path parsing (one for
reparse points, and one for SFU use case), and fix for cleanup after
failed SET_REPARSE operation.
- fix for SMB2.1 signing bug introduced by recent patch to NFS symlink
path, and NFS reparse point validation
- comment cleanup
* tag 'v6.12-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not convert delimiter when parsing NFS-style symlinks
cifs: Validate content of NFS reparse point buffer
cifs: Fix buffer overflow when parsing NFS reparse points
smb: client: Correct typos in multiple comments across various files
smb: client: use actual path when queryfs
cifs: Remove intermediate object of failed create reparse call
Revert "smb: client: make SHA-512 TFM ephemeral"
smb: Update comments about some reparse point tags
cifs: Check for UTF-16 null codepoint in SFU symlink target location
NFS-style symlinks have target location always stored in NFS/UNIX form
where backslash means the real UNIX backslash and not the SMB path
separator.
So do not mangle slash and backslash content of NFS-style symlink during
readlink() syscall as it is already in the correct Linux form.
This fixes interoperability of NFS-style symlinks with backslashes created
by Linux NFS3 client throw Windows NFS server and retrieved by Linux SMB
client throw Windows SMB server, where both Windows servers exports the
same directory.
Fixes: d5ecebc490 ("smb3: Allow query of symlinks stored as reparse points")
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Symlink target location stored in DataBuffer is encoded in UTF-16. So check
that symlink DataBuffer length is non-zero and even number. And check that
DataBuffer does not contain UTF-16 null codepoint because Linux cannot
process symlink with null byte.
DataBuffer for char and block devices is 8 bytes long as it contains two
32-bit numbers (major and minor). Add check for this.
DataBuffer buffer for sockets and fifos zero-length. Add checks for this.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ReparseDataLength is sum of the InodeType size and DataBuffer size.
So to get DataBuffer size it is needed to subtract InodeType's size from
ReparseDataLength.
Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer
at position after the end of the buffer because it does not subtract
InodeType size from the length. Fix this problem and correctly subtract
variable len.
Member InodeType is present only when reparse buffer is large enough. Check
for ReparseDataLength before accessing InodeType to prevent another invalid
memory access.
Major and minor rdev values are present also only when reparse buffer is
large enough. Check for reparse buffer size before calling reparse_mkdev().
Fixes: d5ecebc490 ("smb3: Allow query of symlinks stored as reparse points")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Due to server permission control, the client does not have access to
the shared root directory, but can access subdirectories normally, so
users usually mount the shared subdirectories directly. In this case,
queryfs should use the actual path instead of the root directory to
avoid the call returning an error (EACCES).
Signed-off-by: wangrong <wangrong@uniontech.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
If CREATE was successful but SMB2_OP_SET_REPARSE failed then remove the
intermediate object created by CREATE. Otherwise empty object stay on the
server when reparse call failed.
This ensures that if the creating of special files is unsupported by the
server then no empty file stay on the server as a result of unsupported
operation.
Fixes: 102466f303 ("smb: client: allow creating special files via reparse points")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Check that read buffer of SFU symlink target location does not contain
UTF-16 null codepoint (via UniStrnlen() call) because Linux cannot process
symlink with null byte, it truncates everything in buffer after null byte.
Fixes: cf2ce67345 ("cifs: Add support for reading SFU symlink location")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The SHA-512 shash TFM is used only briefly during Session Setup stage,
when computing SMB 3.1.1 preauth hash.
There's no need to keep it allocated in servers' secmech the whole time,
so keep its lifetime inside smb311_update_preauth_hash().
This also makes smb311_crypto_shash_allocate() redundant, so expose
smb3_crypto_shash_allocate() and use that.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
The HMAC-MD5 shash TFM is used only briefly during Session Setup stage,
when computing NTLMv2 hashes.
There's no need to keep it allocated in servers' secmech the whole time,
so keep its lifetime inside setup_ntlmv2_rsp().
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
When having several mounts that share same credential and the client
couldn't re-establish an SMB session due to an expired kerberos ticket
or rotated password, smb2_calc_signature() will end up flooding dmesg
when not finding SMB sessions to calculate signatures.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For extra channels, point ->secmech.{enc,dec} to the primary
server ones.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=nVf0
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Most are from the recent SMB3.1.1 test event, and also an important
netfs fix for a cifs mtime write regression
- fix mode reported by stat of readonly directories and files
- DFS (global namespace) related fixes
- fixes for special file support via reparse points
- mount improvement and reconnect fix
- fix for noisy log message on umount
- two netfs related fixes, one fixing a recent regression, and add
new write tracepoint"
* tag 'v6.12-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
netfs, cifs: Fix mtime/ctime update for mmapped writes
cifs: update internal version number
smb: client: print failed session logoffs with FYI
cifs: Fix reversion of the iter in cifs_readv_receive().
smb3: fix incorrect mode displayed for read-only files
smb: client: fix parsing of device numbers
smb: client: set correct device number on nfs reparse points
smb: client: propagate error from cifs_construct_tcon()
smb: client: fix DFS failover in multiuser mounts
cifs: Make the write_{enter,done,err} tracepoints display netfs info
smb: client: fix DFS interlink failover
smb: client: improve purging of cached referrals
smb: client: avoid unnecessary reconnects when refreshing referrals
Do not flood dmesg with failed session logoffs as kerberos tickets
getting expired or passwords being rotated is a very common scenario.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_read_iter_from_socket() copies the iterator that's passed in for the
socket to modify as and if it will, and then advances the original iterator
by the amount sent. However, both callers revert the advancement (although
receive_encrypted_read() zeros beyond the iterator first). The problem is,
though, that cifs_readv_receive() reverts by the original length, not the
amount transmitted which can cause an oops in iov_iter_revert().
Fix this by:
(1) Remove the iov_iter_advance() from cifs_read_iter_from_socket().
(2) Remove the iov_iter_revert() from both callers. This fixes the bug in
cifs_readv_receive().
(3) In receive_encrypted_read(), if we didn't get back as much data as the
buffer will hold, copy the iterator, advance the copy and use the copy
to drive iov_iter_zero().
As a bonus, this gets rid of some unnecessary work.
This was triggered by generic/074 with the "-o sign" mount option.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Commands like "chmod 0444" mark a file readonly via the attribute flag
(when mapping of mode bits into the ACL are not set, or POSIX extensions
are not negotiated), but they were not reported correctly for stat of
directories (they were reported ok for files and for "ls"). See example
below:
root:~# ls /mnt2 -l
total 12
drwxr-xr-x 2 root root 0 Sep 21 18:03 normaldir
-rwxr-xr-x 1 root root 0 Sep 21 23:24 normalfile
dr-xr-xr-x 2 root root 0 Sep 21 17:55 readonly-dir
-r-xr-xr-x 1 root root 209716224 Sep 21 18:15 readonly-file
root:~# stat -c %a /mnt2/readonly-dir
755
root:~# stat -c %a /mnt2/readonly-file
555
This fixes the stat of directories when ATTR_READONLY is set
(in cases where the mode can not be obtained other ways).
root:~# stat -c %a /mnt2/readonly-dir
555
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Report correct major and minor numbers from special files created with
NFS reparse points.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix major and minor numbers set on special files created with NFS
reparse points.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Propagate error from cifs_construct_tcon() in cifs_sb_tlink() instead of
always returning -EACCES.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For sessions and tcons created on behalf of new users accessing a
multiuser mount, matching their sessions in tcon_super_cb() with
master tcon will always lead to false as every new user will have its
own session and tcon.
All multiuser sessions, however, will inherit ->dfs_root_ses from
master tcon, so match it instead.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make the write RPC tracepoints use the same trace macro complexes as the
read tracepoints and display the netfs request and subrequest IDs where
available (see commit 519be98971 "cifs: Add a tracepoint to track credits
involved in R/W requests").
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
