These are needed by fuse-over-io-uring.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Another preparation patch, as this function will be needed by
fuse/dev.c and fuse/dev_uring.c.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This function is needed by fuse_uring.c to clean ring queues,
so make it non static. Especially in non-static mode the function
name 'end_requests' should be prefixed with fuse_
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----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=fgyr
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Improved handling of LSM "secctx" strings through lsm_context struct
The LSM secctx string interface is from an older time when only one
LSM was supported, migrate over to the lsm_context struct to better
support the different LSMs we now have and make it easier to support
new LSMs in the future.
These changes explain the Rust, VFS, and networking changes in the
diffstat.
- Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are
enabled
Small tweak to be a bit smarter about when we build the LSM's common
audit helpers.
- Check for absurdly large policies from userspace in SafeSetID
SafeSetID policies rules are fairly small, basically just "UID:UID",
it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which
helps quiet a number of syzbot related issues. While work is being
done to address the syzbot issues through other mechanisms, this is a
trivial and relatively safe fix that we can do now.
- Various minor improvements and cleanups
A collection of improvements to the kernel selftests, constification
of some function parameters, removing redundant assignments, and
local variable renames to improve readability.
* tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: initialize local array before use to quiet static analysis
safesetid: check size of policy writes
net: corrections for security_secid_to_secctx returns
lsm: rename variable to avoid shadowing
lsm: constify function parameters
security: remove redundant assignment to return variable
lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set
selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test
binder: initialize lsm_context structure
rust: replace lsm context+len with lsm_context
lsm: secctx provider check on release
lsm: lsm_context in security_dentry_init_security
lsm: use lsm_context in security_inode_getsecctx
lsm: replace context+len with lsm_context
lsm: ensure the correct LSM context releaser
In fuse_get_user_pages(), set *nbytesp to 0 when struct page **pages
allocation fails. This prevents the caller (fuse_direct_io) from making
incorrect assumptions that could lead to NULL pointer dereferences
when processing the request reply.
Previously, *nbytesp was left unmodified on allocation failure, which
could cause issues if the caller assumed pages had been added to
ap->descs[] when they hadn't.
Reported-by: syzbot+87b8e6ed25dbc41759f7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=87b8e6ed25dbc41759f7
Fixes: 3b97c3652d ("fuse: convert direct io to use folios")
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Tested-by: Dmitry Antipov <dmantipov@yandex.ru>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For the direct io case, the pages from userspace may be part of a huge
folio, even if all folios in the page cache for fuse are small.
Fix the logic for calculating the offset and length of the folio for
the direct io case, which currently incorrectly assumes that all folios
encountered are one page size.
Fixes: 3b97c3652d ("fuse: convert direct io to use folios")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Replace the (secctx,seclen) pointer pair with a single lsm_context
pointer to allow return of the LSM identifier along with the context
and context length. This allows security_release_secctx() to know how
to release the context. Callers have been modified to use or save the
returned data from the new structure.
Cc: ceph-devel@vger.kernel.org
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
A small number of improvements all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmdGPb8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpPowH/3Fc6uWqgMRiHgBP6BMlmAYRhhovlBF70Cug
SN1dQuV9aVRYC4rqUoYb3F7X4Szn9fpPiGuwDywmI5jcSNMbsQlCxwrymcVXKxuO
sZRGBtIYvzHbZzYjp380WHuglCZ+cIfQxLV6fI2ly4oN8LybKwXSxrTQ1uu/CSZ5
vLiyAAJ7J9bKvrMjKg9vXTzK5/jzf7fKhB9NnQb4/JbsVcEoJdNkCxm/cV4wyVa+
RateZBDgy6YUULKKei4MuaBGHX3pHhxlyrE9aas3E74ijIz+H8tOBz6mgcI939z7
xfdqGRGUnZrC7t8ZjWs9CCCu1jR18hXNMZXcCuDMdyghQib5D7o=
=GzUl
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"A small number of improvements all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_vdpa: remove redundant check on desc
virtio_fs: store actual queue index in mq_map
virtio_fs: add informative log for new tag discovery
virtio: Make vring_new_virtqueue support packed vring
virtio_pmem: Add freeze/restore callbacks
vdpa/mlx5: Fix suboptimal range on iotlb iteration
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZ0Rb/wAKCRDh3BK/laaZ
PK80AQDAUgA6S5SSrbJxwRFNOhbwtZxZqJ8fomJR5xuWIEQ9pwEAkpFqhBhBW0y1
0YaREow2aDANQQtSUrfPtgva1ZXFwQU=
=Cyx5
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add page -> folio conversions (Joanne Koong, Josef Bacik)
- Allow max size of fuse requests to be configurable with a sysctl
(Joanne Koong)
- Allow FOPEN_DIRECT_IO to take advantage of async code path (yangyun)
- Fix large kernel reads (like a module load) in virtio_fs (Hou Tao)
- Fix attribute inconsistency in case readdirplus (and plain lookup in
corner cases) is racing with inode eviction (Zhang Tianci)
- Fix a WARN_ON triggered by virtio_fs (Asahi Lina)
* tag 'fuse-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (30 commits)
virtiofs: dax: remove ->writepages() callback
fuse: check attributes staleness on fuse_iget()
fuse: remove pages for requests and exclusively use folios
fuse: convert direct io to use folios
mm/writeback: add folio_mark_dirty_lock()
fuse: convert writebacks to use folios
fuse: convert retrieves to use folios
fuse: convert ioctls to use folios
fuse: convert writes (non-writeback) to use folios
fuse: convert reads to use folios
fuse: convert readdir to use folios
fuse: convert readlink to use folios
fuse: convert cuse to use folios
fuse: add support in virtio for requests using folios
fuse: support folios in struct fuse_args_pages and fuse_copy_pages()
fuse: convert fuse_notify_store to use folios
fuse: convert fuse_retrieve to use folios
fuse: use the folio based vmstat helpers
fuse: convert fuse_writepage_need_send to take a folio
fuse: convert fuse_do_readpage to use folios
...
-----BEGIN PGP SIGNATURE-----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=pgoX
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Amir Goldstein:
- Fix a syzbot reported NULL pointer deref with bfs lower layers
- Fix a copy up failure of large file from lower fuse fs
- Followup cleanup of backing_file API from Miklos
- Introduction and use of revert/override_creds_light() helpers, that
were suggested by Christian as a mitigation to cache line bouncing
and false sharing of fields in overlayfs creator_cred long lived
struct cred copy.
- Store up to two backing file references (upper and lower) in an
ovl_file container instead of storing a single backing file in
file->private_data.
This is used to avoid the practice of opening a short lived backing
file for the duration of some file operations and to avoid the
specialized use of FDPUT_FPUT in such occasions, that was getting in
the way of Al's fd_file() conversions.
* tag 'ovl-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: Filter invalid inodes with missing lookup function
ovl: convert ovl_real_fdget() callers to ovl_real_file()
ovl: convert ovl_real_fdget_path() callers to ovl_real_file_path()
ovl: store upper real file in ovl_file struct
ovl: allocate a container struct ovl_file for ovl private context
ovl: do not open non-data lower file for fsync
ovl: Optimize override/revert creds
ovl: pass an explicit reference of creators creds to callers
ovl: use wrapper ovl_revert_creds()
fs/backing-file: Convert to revert/override_creds_light()
cred: Add a light version of override/revert_creds()
backing-file: clean up the API
ovl: properly handle large files in ovl_security_fileattr
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
When using FUSE DAX with virtiofs, cache coherency is managed by the
host. Disk persistence is handled via fsync() and friends, which are
passed directly via the FUSE layer to the host. Therefore, there's no
need to do dax_writeback_mapping_range(). All that ends up doing is a
cache flush operation, which is not caught by KVM and doesn't do much,
since the host and guest are already cache-coherent.
Since dax_writeback_mapping_range() checks that the inode block size is
equal to PAGE_SIZE, this fixes a spurious WARN when virtiofs is used
with a mismatched guest PAGE_SIZE and virtiofs backing FS block size
(this happens, for example, when it's a tmpfs and the host and guest
have a different PAGE_SIZE). FUSE DAX does not require any particular FS
block size, since it always performs DAX mappings in aligned 2MiB
blocks.
See discussion in [1].
[1] https://lore.kernel.org/lkml/20241101-dax-page-size-v1-1-eedbd0c6b08f@asahilina.net/T/#u
[SzM: remove the empty callback]
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Function fuse_direntplus_link() might call fuse_iget() to initialize a new
fuse_inode and change its attributes. If fi->attr_version is always
initialized with 0, even if the attributes returned by the FUSE_READDIR
request is staled, as the new fi->attr_version is 0, fuse_change_attributes
will still set the staled attributes to inode. This wrong behaviour may
cause file size inconsistency even when there is no changes from
server-side.
To reproduce the issue, consider the following 2 programs (A and B) are
running concurrently,
A B
---------------------------------- --------------------------------
{ /fusemnt/dir/f is a file path in a fuse mount, the size of f is 0. }
readdir(/fusemnt/dir) start
//Daemon set size 0 to f direntry
fallocate(f, 1024)
stat(f) // B see size 1024
echo 2 > /proc/sys/vm/drop_caches
readdir(/fusemnt/dir) reply to kernel
Kernel set 0 to the I_NEW inode
stat(f) // B see size 0
In the above case, only program B is modifying the file size, however, B
observes file size changing between the 2 'readonly' stat() calls. To fix
this issue, we should make sure readdirplus still follows the rule of
attr_version staleness checking even if the fi->attr_version is lost due to
inode eviction.
To identify this situation, the new fc->evict_ctr is used to record whether
the eviction of inodes occurs during the readdirplus request processing.
If it does, the result of readdirplus may be inaccurate; otherwise, the
result of readdirplus can be trusted. Although this may still lead to
incorrect invalidation, considering the relatively low frequency of
evict occurrences, it should be acceptable.
Link: https://lore.kernel.org/lkml/20230711043405.66256-2-zhangjiachen.jaycee@bytedance.com/
Link: https://lore.kernel.org/lkml/20241114070905.48901-1-zhangtianci.1997@bytedance.com/
Reported-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will eliminate the need for index recalculation during the fast
path.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20241006184341.9081-1-mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enhance the device probing process by adding a log message when a new
virtio-fs tag is successfully discovered. This improvement provides
better visibility into the initialization of virtio-fs devices.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20241006184324.8497-1-mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Pass iocb to ctx->end_write() instead of file + pos
- Get rid of ctx->user_file, which is redundant most of the time
- Instead pass iocb to backing_file_splice_read and
backing_file_splice_write
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
All fuse requests use folios instead of pages for transferring data.
Remove pages from the requests and exclusively use folios.
No functional changes.
[SzM: rename back folio_descs -> descs, etc.]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert direct io requests to use folios instead of pages.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert writeback requests to use folios instead of pages.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert retrieve requests to use folios instead of pages.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert ioctl requests to use folios instead of pages.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert non-writeback write requests to use folios instead of pages.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert read requests to use folios instead of pages.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert readdir requests to use a folio instead of a page.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert readlink requests to use a folio instead of a page.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert cuse requests to use a folio instead of a page.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Until all requests have been converted to use folios instead of pages,
virtio will need to support both types. Once all requests have been
converted, then virtio will support just folios.
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This adds support in struct fuse_args_pages and fuse_copy_pages() for
using folios instead of pages for transferring data. Both folios and
pages must be supported right now in struct fuse_args_pages and
fuse_copy_pages() until all request types have been converted to use
folios. Once all have been converted, then
struct fuse_args_pages and fuse_copy_pages() will only support folios.
Right now in fuse, all folios are one page (large folios are not yet
supported). As such, copying folio->page is sufficient for copying
the entire folio in fuse_copy_pages().
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
all failure exits prior to fdget() leave the scope, all matching fdput()
are immediately followed by leaving the scope.
[xfs_ioc_commit_range() chunk moved here as well]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This function creates pages in an inode and copies data into them,
update the function to use a folio instead of a page, and use the
appropriate folio helpers.
[SzM: use filemap_grab_folio()]
[Hau Tao: The third argument of folio_zero_range() should be the length to
be zeroed, not the total length. Fix it by using folio_zero_segment()
instead in fuse_notify_store()]
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We're just looking for pages in a mapping, use a folio and the folio
lookup function directly instead of using the page helper.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In order to make it easier to switch to folios in the fuse_args_pages
update the places where we update the vmstat counters for writeback to
use the folio related helpers. On the inc side this is easy as we
already have the folio, on the dec side we have to page_folio() the
pages for now.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_writepage_need_send is called by fuse_writepages_fill() which
already has a folio. Change fuse_writepage_need_send() to take a folio
instead, add a helper to check if the folio range is under writeback and
use this, as well as the appropriate folio helpers in the rest of the
function. Update fuse_writepage_need_send() to pass in the folio
directly.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now that the buffered write path is using folios, convert
fuse_do_readpage() to take a folio instead of a page, update it to use
the appropriate folio helpers, and update the callers to pass in the
folio directly instead of a page.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This combines the file_remove_privs() and file_update_time() call into
one call.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert this to grab the folio directly, and update all the helpers to
use the folio related functions.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert this to grab the folio directly, and update all the helpers to
use the folio related functions.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert this to grab the folio from the fuse_args_pages and use the
appropriate folio related functions.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently we're using the __readahead_batch() helper which populates our
fuse_args_pages->pages array with pages. Convert this to use the newer
folio based pattern which is to call readahead_folio() to get the next
folio in the read ahead batch. I've updated the code to use things like
folio_size() and to take into account larger folio sizes, but this is
purely to make that eventual work easier to do, we currently will not
get large folios so this is more future proofing than actual support.
[SzM: remove check for readahead_folio() won't return NULL (at least for
now) so remove ugly assign in conditional.]
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_send_readpages() waits for writeback on each page. This can be
replaced by a single call to fuse_range_is_writeback().
[SzM: split this off from "fuse: convert readahead to use folios"]
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When invoking virtio_fs_enqueue_req() through kworker, both the
allocation of the sg array and the bounce buffer still use GFP_ATOMIC.
Considering the size of the sg array may be greater than PAGE_SIZE, use
GFP_NOFS instead of GFP_ATOMIC to lower the possibility of memory
allocation failure and to avoid unnecessarily depleting the atomic
reserves. GFP_NOFS is not passed to virtio_fs_enqueue_req() directly,
GFP_KERNEL and memalloc_nofs_{save|restore} helpers are used instead.
It may seem OK to pass GFP_NOFS to virtio_fs_enqueue_req() as well when
queuing the request for the first time, but this is not the case. The
reason is that fuse_request_queue_background() may call
->queue_request_and_unlock() while holding fc->bg_lock, which is a
spin-lock. Therefore, still use GFP_ATOMIC for it.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When trying to insert a 10MB kernel module kept in a virtio-fs with cache
disabled, the following warning was reported:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ......
Modules linked in:
CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:__alloc_pages+0x2bf/0x380
......
Call Trace:
<TASK>
? __warn+0x8e/0x150
? __alloc_pages+0x2bf/0x380
__kmalloc_large_node+0x86/0x160
__kmalloc+0x33c/0x480
virtio_fs_enqueue_req+0x240/0x6d0
virtio_fs_wake_pending_and_unlock+0x7f/0x190
queue_request_and_unlock+0x55/0x60
fuse_simple_request+0x152/0x2b0
fuse_direct_io+0x5d2/0x8c0
fuse_file_read_iter+0x121/0x160
__kernel_read+0x151/0x2d0
kernel_read+0x45/0x50
kernel_read_file+0x1a9/0x2a0
init_module_from_file+0x6a/0xe0
idempotent_init_module+0x175/0x230
__x64_sys_finit_module+0x5d/0xb0
x64_sys_call+0x1c3/0x9e0
do_syscall_64+0x3d/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
......
</TASK>
---[ end trace 0000000000000000 ]---
The warning is triggered as follows:
1) syscall finit_module() handles the module insertion and it invokes
kernel_read_file() to read the content of the module first.
2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and
passes it to kernel_read(). kernel_read() constructs a kvec iter by
using iov_iter_kvec() and passes it to fuse_file_read_iter().
3) virtio-fs disables the cache, so fuse_file_read_iter() invokes
fuse_direct_io(). As for now, the maximal read size for kvec iter is
only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so
fuse_direct_io() doesn't split the 10MB buffer. It saves the address and
the size of the 10MB-sized buffer in out_args[0] of a fuse request and
passes the fuse request to virtio_fs_wake_pending_and_unlock().
4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to
queue the request. Because virtiofs need DMA-able address, so
virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for
all fuse args, copies these args into the bounce buffer and passed the
physical address of the bounce buffer to virtiofsd. The total length of
these fuse args for the passed fuse request is about 10MB, so
copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and
it triggers the warning in __alloc_pages():
if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp))
return NULL;
5) virtio_fs_enqueue_req() will retry the memory allocation in a
kworker, but it won't help, because kmalloc() will always return NULL
due to the abnormal size and finit_module() will hang forever.
A feasible solution is to limit the value of max_read for virtio-fs, so
the length passed to kmalloc() will be limited. However it will affect
the maximal read size for normal read. And for virtio-fs write initiated
from kernel, it has the similar problem but now there is no way to limit
fc->max_write in kernel.
So instead of limiting both the values of max_read and max_write in
kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as
true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use
pages instead of pointer to pass the KVEC_IO data.
After switching to pages for KVEC_IO data, these pages will be used for
DMA through virtio-fs. If these pages are backed by vmalloc(),
{flush|invalidate}_kernel_vmap_range() are necessary to flush or
invalidate the cache before the DMA operation. So add two new fields in
fuse_args_pages to record the base address of vmalloc area and the
condition indicating whether invalidation is needed. Perform the flush
in fuse_get_user_pages() for write operations and the invalidation in
fuse_release_user_pages() for read operations.
It may seem necessary to introduce another field in fuse_conn to
indicate that these KVEC_IO pages are used for DMA, However, considering
that virtio-fs is currently the only user of use_pages_for_kvec_io, just
reuse use_pages_for_kvec_io to indicate that these pages will be used
for DMA.
Fixes: a62a8ef9d9 ("virtio-fs: add virtiofs filesystem")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 23c94e1cdc ("fuse: Switch to using async direct IO
for FOPEN_DIRECT_IO") gave the async direct IO code path in the
fuse_direct_read_iter() and fuse_direct_write_iter(). But since
these two functions are only called under FOPEN_DIRECT_IO is set,
it seems that we can also use the async direct IO even the flag
IOCB_DIRECT is not set to enjoy the async direct IO method. Also
move the definition of fuse_io_priv to where it is used in fuse_
direct_write_iter.
Signed-off-by: yangyun <yangyun50@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Introduce the capability to dynamically configure the max pages limit
(FUSE_MAX_MAX_PAGES) through a sysctl. This allows system administrators
to dynamically set the maximum number of pages that can be used for
servicing requests in fuse.
Previously, this is gated by FUSE_MAX_MAX_PAGES which is statically set
to 256 pages. One result of this is that the buffer size for a write
request is limited to 1 MiB on a 4k-page system.
The default value for this sysctl is the original limit (256 pages).
$ sysctl -a | grep max_pages_limit
fs.fuse.max_pages_limit = 256
$ sysctl -n fs.fuse.max_pages_limit
256
$ echo 1024 | sudo tee /proc/sys/fs/fuse/max_pages_limit
1024
$ sysctl -n fs.fuse.max_pages_limit
1024
$ echo 65536 | sudo tee /proc/sys/fs/fuse/max_pages_limit
tee: /proc/sys/fs/fuse/max_pages_limit: Invalid argument
$ echo 0 | sudo tee /proc/sys/fs/fuse/max_pages_limit
tee: /proc/sys/fs/fuse/max_pages_limit: Invalid argument
$ echo 65535 | sudo tee /proc/sys/fs/fuse/max_pages_limit
65535
$ sysctl -n fs.fuse.max_pages_limit
65535
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
yangyun reported that libfuse test test_copy_file_range() copies zero
bytes from a newly written file when fuse passthrough is enabled.
The reason is that extending passthrough write is not updating the fuse
inode size and when vfs_copy_file_range() observes a zero size inode,
it returns without calling the filesystem copy_file_range() method.
Fix this by adjusting the fuse inode size after an extending passthrough
write.
This does not provide cache coherency of fuse inode attributes and
backing inode attributes, but it should prevent situations where fuse
inode size is too small, causing read/copy to be wrongly shortened.
Reported-by: yangyun <yangyun50@huawei.com>
Closes: https://github.com/libfuse/libfuse/issues/1048
Fixes: 57e1176e60 ("fuse: implement read/write passthrough")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Several new features here:
virtio-balloon supports new stats
vdpa supports setting mac address
vdpa/mlx5 suspend/resume as well as MKEY ops are now faster
virtio_fs supports new sysfs entries for queue info
virtio/vsock performance has been improved
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbz7ykPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkk8H/A3vMRYXBzne9anezZLvADKS/CpX7v0DFEVj
VfSMWXvYdUariYDyyb7pZsvK5QR22pE0pIaW6Kcgv9fNwq27M/H6g6NJk5ny8a7d
216AQs1J28pXPPY+q03fhf3SzE3yHP8aeD9lyiO9QJYfs9vjtoyZeBGt3a4IUSX4
ZeNBAx8xWTBcEDIIcZLdY1DNDTbZ4+qQ12Ln9IKq7D4xkE6l7Xh+HGdgTWTnDZ8P
qEUUOmJTFKTQdOiVuU4NN3wzgHKWHdwKg0uWXo7ereYr3kYe3q//jCcLMv88a1x0
XP7NRBQg/rsErwTMdLz6ffyqXJs6lGGqNXzRfZKEwAvmnh/+zs4=
=gNBq
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-balloon supports new stats
- vdpa supports setting mac address
- vdpa/mlx5 suspend/resume as well as MKEY ops are now faster
- virtio_fs supports new sysfs entries for queue info
- virtio/vsock performance has been improved
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vsock/virtio: avoid queuing packets when intermediate queue is empty
vsock/virtio: refactor virtio_transport_send_pkt_work
fw_cfg: Constify struct kobj_type
vdpa/mlx5: Postpone MR deletion
vdpa/mlx5: Introduce init/destroy for MR resources
vdpa/mlx5: Rename mr_mtx -> lock
vdpa/mlx5: Extract mr members in own resource struct
vdpa/mlx5: Rename function
vdpa/mlx5: Delete direct MKEYs in parallel
vdpa/mlx5: Create direct MKEYs in parallel
MAINTAINERS: add virtio-vsock driver in the VIRTIO CORE section
virtio_fs: add sysfs entries for queue information
virtio_fs: introduce virtio_fs_put_locked helper
vdpa: Remove unused declarations
vdpa/mlx5: Parallelize VQ suspend/resume for CVQ MQ command
vdpa/mlx5: Small improvement for change_num_qps()
vdpa/mlx5: Keep notifiers during suspend but ignore
vdpa/mlx5: Parallelize device resume
vdpa/mlx5: Parallelize device suspend
vdpa/mlx5: Use async API for vq modify commands
...
Introduce sysfs entries to provide visibility to the multiple queues
used by the Virtio FS device. This enhancement allows users to query
information about these queues.
Specifically, add two sysfs entries:
1. Queue name: Provides the name of each queue (e.g. hiprio/requests.8).
2. CPU list: Shows the list of CPUs that can process requests for each
queue.
The CPU list feature is inspired by similar functionality in the block
MQ layer, which provides analogous sysfs entries for block devices.
These new sysfs entries will improve observability and aid in debugging
and performance tuning of Virtio FS devices.
Reviewed-by: Idan Zach <izach@nvidia.com>
Reviewed-by: Shai Malin <smalin@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20240825130716.9506-2-mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new helper function virtio_fs_put_locked to encapsulate the
common pattern of releasing a virtio_fs reference while holding a lock.
The existing virtio_fs_put helper will be used to release a virtio_fs
reference while not holding a lock.
Also add an assertion in case the lock is not taken when it should.
Reviewed-by: Idan Zach <izach@nvidia.com>
Reviewed-by: Shai Malin <smalin@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <20240825130716.9506-1-mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZvKlbgAKCRDh3BK/laaZ
PLliAP9q5btlhlffnRg2LWCf4rIzbJ6vkORkc+GeyAXnWkIljQEA9En1K2vyg7Tk
f9FvNQK9C+pS0GxURDRI7YedJ2f9FQ0=
=wuY0
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add support for idmapped fuse mounts (Alexander Mikhalitsyn)
- Add optimization when checking for writeback (yangyun)
- Add tracepoints (Josef Bacik)
- Clean up writeback code (Joanne Koong)
- Clean up request queuing (me)
- Misc fixes
* tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (32 commits)
fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
fuse: clear FR_PENDING if abort is detected when sending request
fs/fuse: convert to use invalid_mnt_idmap
fs/mnt_idmapping: introduce an invalid_mnt_idmap
fs/fuse: introduce and use fuse_simple_idmap_request() helper
fs/fuse: fix null-ptr-deref when checking SB_I_NOIDMAP flag
fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN
virtio_fs: allow idmapped mounts
fuse: allow idmapped mounts
fuse: warn if fuse_access is called when idmapped mounts are allowed
fuse: handle idmappings properly in ->write_iter()
fuse: support idmapped ->rename op
fuse: support idmapped ->set_acl
fuse: drop idmap argument from __fuse_get_acl
fuse: support idmapped ->setattr op
fuse: support idmapped ->permission inode op
fuse: support idmapped getattr inode op
fuse: support idmap for mkdir/mknod/symlink/create/tmpfile
fuse: support idmapped FUSE_EXT_GROUPS
fuse: add an idmap argument to fuse_simple_request
...
This may be a typo. The comment has said shared locks are
not allowed when this bit is set. If using shared lock, the
wait in `fuse_file_cached_io_open` may be forever.
Fixes: 205c1d8026 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
CC: stable@vger.kernel.org # v6.9
Signed-off-by: yangyun <yangyun50@huawei.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The (!fiq->connected) check was moved into the queuing method resulting in
the following:
Fixes: 5de8acb41c ("fuse: cleanup request queuing towards virtiofs")
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/ZvFEAM6JfrBKsOU0@ly-workstation/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
We should convert fs/fuse code to use a newly introduced
invalid_mnt_idmap instead of passing a NULL as idmap pointer.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Only f_path is used from backing files registered with
FUSE_DEV_IOC_BACKING_OPEN, so it makes sense to allow O_PATH descriptors.
O_PATH files have an empty f_op, so don't check read_iter/write_iter.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Allow idmapped mounts for virtiofs.
It's absolutely safe as for virtiofs we have the same
feature negotiation mechanism as for classical fuse
filesystems. This does not affect any existing
setups anyhow.
virtiofsd support:
https://gitlab.com/virtio-fs/virtiofsd/-/merge_requests/245
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvgAKCRCRxhvAZXjc
ou77AQD3U1KjbdgzbUi6kaUmiiWOPhfYTlm8mho8dBjqvTCB+AD/XTWSFCWWhHB4
KyQZTbjRD81xmVNbKjASazp0EA6Ahwc=
=gIsD
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs folio updates from Christian Brauner:
"This contains work to port write_begin and write_end to rely on folios
for various filesystems.
This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs,
ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and
squashfs.
After this series lands a bunch of the filesystems in this list do not
mention struct page anymore"
* tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits)
Squashfs: Ensure all readahead pages have been used
Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index
Squashfs: Update squashfs_readpage_block() to not use page->index
Squashfs: Update squashfs_readahead() to not use page->index
Squashfs: Update page_actor to not use page->index
jffs2: Use a folio in jffs2_garbage_collect_dnode()
jffs2: Convert jffs2_do_readpage_nolock to take a folio
buffer: Convert __block_write_begin() to take a folio
ocfs2: Convert ocfs2_write_zero_page to use a folio
fs: Convert aops->write_begin to take a folio
fs: Convert aops->write_end to take a folio
vboxsf: Use a folio in vboxsf_write_end()
orangefs: Convert orangefs_write_begin() to use a folio
orangefs: Convert orangefs_write_end() to use a folio
jffs2: Convert jffs2_write_begin() to use a folio
jffs2: Convert jffs2_write_end() to use a folio
hostfs: Convert hostfs_write_end() to use a folio
fuse: Convert fuse_write_begin() to use a folio
fuse: Convert fuse_write_end() to use a folio
f2fs: Convert f2fs_write_begin() to use a folio
...
Now we have everything in place and we can allow idmapped mounts
by setting the FS_ALLOW_IDMAP flag. Notice that real availability
of idmapped mounts will depend on the fuse daemon. Fuse daemon
have to set FUSE_ALLOW_IDMAP flag in the FUSE_INIT reply.
To discuss:
- we enable idmapped mounts support only if "default_permissions" mode is
enabled, because otherwise we would need to deal with UID/GID mappings in
the userspace side OR provide the userspace with idmapped
req->in.h.uid/req->in.h.gid values which is not something that we probably
want to. Idmapped mounts philosophy is not about faking caller uid/gid.
Some extra links and examples:
- libfuse support
https://github.com/mihalicyn/libfuse/commits/idmap_support
- fuse-overlayfs support:
https://github.com/mihalicyn/fuse-overlayfs/commits/idmap_support
- cephfs-fuse conversion example
https://github.com/mihalicyn/ceph/commits/fuse_idmap
- glusterfs conversion example
https://github.com/mihalicyn/glusterfs/commits/fuse_idmap
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
It is not possible with the current fuse code, but let's protect ourselves
from regressions in the future.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is needed to properly clear suid/sgid.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
RENAME_WHITEOUT is a special case of ->rename
and we need to take idmappings into account there.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
It's just a matter of adjusting a permission check condition
for S_ISGID flag. All the rest is already handled in the generic
VFS code.
Notice that this permission check is the analog of what
we have in posix_acl_update_mode() generic helper, but
fuse doesn't use this helper as on the kernel side we don't
care about ensuring that POSIX ACL and CHMOD permissions are in sync
as it is a responsibility of a userspace daemon to handle that.
For the same reason we don't have a calls to posix_acl_chmod(),
while most of other filesystem do.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We don't need to have idmap in the __fuse_get_acl as we don't
have any use for it.
In the current POSIX ACL implementation, idmapped mounts are
taken into account on the userspace/kernel border
(see vfs_set_acl_idmapped_mnt() and vfs_posix_acl_to_xattr()).
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Need to translate uid and gid in case of chown(2).
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We only cover the case when "default_permissions" flag
is used. A reason for that is that otherwise all the permission
checks are done in the userspace and we have to deal with
VFS idmapping in the userspace (which is bad), alternatively
we have to provide the userspace with idmapped req->in.h.uid/req->in.h.gid
which is also not align with VFS idmaps philosophy.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We have to:
- pass an idmapping to the generic_fillattr()
to properly handle UIG/GID mapping for the userspace.
- pass -/- to fuse_fillattr() (analog of generic_fillattr() in fuse).
Difference between these two is that generic_fillattr() takes all the
stat() data from the inode directly, while fuse_fillattr() codepath takes a
fresh data just from the userspace reply on the FUSE_GETATTR request.
In some cases we can just pass &nop_mnt_idmap, because idmapping won't be
used in these codepaths. For example, when 3rd argument of
fuse_do_getattr() is NULL then idmap argument is not used.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We have all the infrastructure in place, we just need
to pass an idmapping here.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We don't need to remap parent_gid, but have to adjust
group membership checks and take idmapping into account.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If idmap == NULL *and* filesystem daemon declared idmapped mounts
support, then uid/gid values in a fuse header will be -1.
No functional changes intended.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add some preparational changes in fuse_get_req/fuse_force_creds
to handle idmappings.
Miklos suggested [1], [2] to change the meaning of in.h.uid/in.h.gid
fields when daemon declares support for idmapped mounts. In a new semantic,
we fill uid/gid values in fuse header with a id-mapped caller uid/gid (for
requests which create new inodes), for all the rest cases we just send -1
to userspace.
No functional changes intended.
Link: https://lore.kernel.org/all/CAJfpegsVY97_5mHSc06mSw79FehFWtoXT=hhTUK_E-Yhr7OAuQ@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAJfpegtHQsEUuFq1k4ZbTD3E1h-GsrN3PWyv7X8cg6sfU_W2Yw@mail.gmail.com/ [2]
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZtbV4AAKCRDh3BK/laaZ
PC33AP9XvLpQii0mLo12hTSP11TYpaatdhUvyFFKERle1yWkUgEAvtVutUJryTD2
sz7x5jj4GD9tCWyMlp8Xs5h1Dr4U6wc=
=XdIb
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix EIO if splice and page stealing are enabled on the fuse device
- Disable problematic combination of passthrough and writeback-cache
- Other bug fixes found by code review
* tag 'fuse-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: disable the combination of passthrough and writeback cache
fuse: update stats for pages in dropped aux writeback list
fuse: clear PG_uptodate when using a stolen page
fuse: fix memory leak in fuse_create_open
fuse: check aborted connection before adding requests to pending list for resending
fuse: use unsigned type for getxattr/listxattr size truncation
I've been timing various fuse operations and it's quite annoying to do
with kprobes. Add two tracepoints for sending and ending fuse requests
to make it easier to debug and time various operations.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This change refactors the shared logic in fuse_writepages_fill() and
fuse_writepages_locked() into two separate helper functions,
fuse_writepage_args_page_fill() and fuse_writepage_args_setup().
No functional changes added.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Before this change, wpa->ia.ff is initialized with an acquired reference
on the fuse file right before it submits the writeback request. If there
are auxiliary writebacks, then the initialization and reference
acquisition needs to also be set before we submit the auxiliary writeback
request.
To make the logic simpler and to pave the way for a subsequent
refactoring of fuse_writepages_fill() and fuse_writepage_locked(), this
change initializes and acquires wpa->ia.ff when the wpa is allocated.
No functional changes added.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
To pave the way for refactoring out the shared logic in
fuse_writepages_fill() and fuse_writepage_locked(), this change converts
the temporary page in fuse_writepages_fill() to use the folio API.
This is similar to the change in commit e0887e095a ("fuse: Convert
fuse_writepage_locked to take a folio"), which converted the tmp page in
fuse_writepage_locked() to use the folio API.
inc_node_page_state() is intentionally preserved here instead of
converting to node_stat_add_folio() since it is updating the stat of the
underlying page and to better maintain API symmetry with
dec_node_page_stat() in fuse_writepage_finish_stat().
No functional changes added.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Prior to this change, data->ff is checked and if not initialized then
initialized in the fuse_writepages_fill() callback, which gets called
for every dirty page in the address space mapping.
This logic is better placed in the main fuse_writepages() caller where
data.ff is initialized before walking the dirty pages.
No functional changes added.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move the logic for updating the bdi and page stats for a finished
writeback into a separate helper function, where it can be called from
both fuse_writepage_finish() and fuse_writepage_add() (in the case
where there is already an auxiliary write request for the page).
No functional changes added.
Suggested by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In some cases, the fi->writepages may be empty. And there is no need
to check fi->writepages with spin_lock, which may have an impact on
performance due to lock contention. For example, in scenarios where
multiple readers read the same file without any writers, or where
the page cache is not enabled.
Also remove the outdated comment since commit 6b2fb79963 ("fuse:
optimize writepages search") has optimize the situation by replacing
list with rb-tree.
Signed-off-by: yangyun <yangyun50@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Virtiofs has its own queuing mechanism, but still requests are first queued
on fiq->pending to be immediately dequeued and queued onto the virtio
queue.
The queuing on fiq->pending is unnecessary and might even have some
performance impact due to being a contention point.
Forget requests are handled similarly.
Move the queuing of requests and forgets into the fiq->ops->*.
fuse_iqueue_ops are renamed to reflect the new semantics.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Tested-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Current design and handling of passthrough is without fuse
caching and with that FUSE_WRITEBACK_CACHE is conflicting.
Fixes: 7dc4e97a4f ("fuse: introduce FUSE_PASSTHROUGH capability")
Cc: stable@kernel.org # v6.9
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In the case where the aux writeback list is dropped (e.g. the pages
have been truncated or the connection is broken), the stats for
its pages and backing device info need to be updated as well.
Fixes: e2653bd53a ("fuse: fix leaked aux requests")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Cc: <stable@vger.kernel.org> # v5.1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Originally when a stolen page was inserted into fuse's page cache by
fuse_try_move_page(), it would be marked uptodate. Then
fuse_readpages_end() would call SetPageUptodate() again on the already
uptodate page.
Commit 413e8f014c ("fuse: Convert fuse_readpages_end() to use
folio_end_read()") changed that by replacing the SetPageUptodate() +
unlock_page() combination with folio_end_read(), which does mostly the
same, except it sets the uptodate flag with an xor operation, which in the
above scenario resulted in the uptodate flag being cleared, which in turn
resulted in EIO being returned on the read.
Fix by clearing PG_uptodate instead of setting it in fuse_try_move_page(),
conforming to the expectation of folio_end_read().
Reported-by: Jürg Billeter <j@bitron.ch>
Debugged-by: Matthew Wilcox <willy@infradead.org>
Fixes: 413e8f014c ("fuse: Convert fuse_readpages_end() to use folio_end_read()")
Cc: <stable@vger.kernel.org> # v6.10
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The memory of struct fuse_file is allocated but not freed
when get_create_ext return error.
Fixes: 3e2b6fdbdc ("fuse: send security context of inode on file")
Cc: stable@vger.kernel.org # v5.17
Signed-off-by: yangyun <yangyun50@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is a race condition where inflight requests will not be aborted if
they are in the middle of being re-sent when the connection is aborted.
If fuse_resend has already moved all the requests in the fpq->processing
lists to its private queue ("to_queue") and then the connection starts
and finishes aborting, these requests will be added to the pending queue
and remain on it indefinitely.
Fixes: 760eac73f9 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # v6.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The existing code uses min_t(ssize_t, outarg.size, XATTR_LIST_MAX) when
parsing the FUSE daemon's response to a zero-length getxattr/listxattr
request.
On 32-bit kernels, where ssize_t and outarg.size are the same size, this is
wrong: The min_t() will pass through any size values that are negative when
interpreted as signed.
fuse_listxattr() will then return this userspace-supplied negative value,
which callers will treat as an error value.
This kind of bug pattern can lead to fairly bad security bugs because of
how error codes are used in the Linux kernel. If a caller were to convert
the numeric error into an error pointer, like so:
struct foo *func(...) {
int len = fuse_getxattr(..., NULL, 0);
if (len < 0)
return ERR_PTR(len);
...
}
then it would end up returning this userspace-supplied negative value cast
to a pointer - but the caller of this function wouldn't recognize it as an
error pointer (IS_ERR_VALUE() only detects values in the narrow range in
which legitimate errno values are), and so it would just be treated as a
kernel pointer.
I think there is at least one theoretical codepath where this could happen,
but that path would involve virtio-fs with submounts plus some weird
SELinux configuration, so I think it's probably not a concern in practice.
Cc: stable@vger.kernel.org # v4.9
Fixes: 63401ccdb2 ("fuse: limit xattr returned size")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f2582 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert all callers from working on a page to working on one page
of a folio (support for working on an entire folio can come later).
Removes a lot of folio->page->folio conversions.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Most callers have a folio, and most implementations operate on a folio,
so remove the conversion from folio->page->folio to fit through this
interface.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fetch a folio from the page cache instead of a page and use it throughout
removing several calls to compound_head() and supporting large folios
(in this function). We still have to convert back to a page for calling
internal fuse functions, but hopefully they will be converted soon.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert the passed page to a folio and operate on that.
Replaces five calls to compound_head() with one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Several new features here:
- Virtio find vqs API has been reworked
(required to fix the scalability issue we have with
adminq, which I hope to merge later in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaXjQQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpnIsH/jVNqAQbe/vaBQdNMdnsA+P9A9unLbYRxYCQ
tN73mQRIXKtnZHBRAEbMGq52HPYg8HlN2HJSgyNo6I6t8VD+PiOco7m+3GpmqEcW
aXPOPl0BAbVoDgyutxRuuodP8Z61lBx0mG6iOxpzTXOPGlpQqtPCFHO8YnodqnPf
tMix/5uAqgZKV2siCbw5DtzwEc0gDHU8qsD0/nyoS5nBDF9yh/ardr5P/qiyFDQH
atCNYTOhIFU83pLAaw0fpCGbkt7gxf+5RpWVx3wkYww+/MwvYhsveRvQyaGbBz3n
WDtET3SOtVTta98OAGIKCq/2z8f6mYXBP7vXapBgnJG3vwS/poQ=
=LYua
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), allocate one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-16-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZpEGjAAKCRCRxhvAZXjc
okXfAP4tFUYszUsSqYdsgy9UvXw3Dr5zOIzQmN++NdjGkbU5fgEAs2ystqEfJgr3
v7XvGbu65CvL4/slNhBZOU4yekGx5Qc=
=C4QD
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount API updates from Christian Brauner:
- Add a generic helper to parse uid and gid mount options.
Currently we open-code the same logic in various filesystems which is
error prone, especially since the verification of uid and gid mount
options is a sensitive operation in the face of idmappings.
Add a generic helper and convert all filesystems over to it. Make
sure that filesystems that are mountable in unprivileged containers
verify that the specified uid and gid can be represented in the
owning namespace of the filesystem.
- Convert hostfs to the new mount api.
* tag 'vfs-6.11.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: Convert to new uid/gid option parsing helpers
fuse: verify {g,u}id mount options correctly
fat: Convert to new uid/gid option parsing helpers
fat: Convert to new mount api
fat: move debug into fat_mount_options
vboxsf: Convert to new uid/gid option parsing helpers
tracefs: Convert to new uid/gid option parsing helpers
smb: client: Convert to new uid/gid option parsing helpers
tmpfs: Convert to new uid/gid option parsing helpers
ntfs3: Convert to new uid/gid option parsing helpers
isofs: Convert to new uid/gid option parsing helpers
hugetlbfs: Convert to new uid/gid option parsing helpers
ext4: Convert to new uid/gid option parsing helpers
exfat: Convert to new uid/gid option parsing helpers
efivarfs: Convert to new uid/gid option parsing helpers
debugfs: Convert to new uid/gid option parsing helpers
autofs: Convert to new uid/gid option parsing helpers
fs_parse: add uid & gid option option parsing helpers
hostfs: Add const qualifier to host_root in hostfs_fill_super()
hostfs: convert hostfs to use the new mount API
Currently, when the Virtio queue is full, a work item is scheduled
to execute in 1ms that retries adding the request to the queue.
This is a large amount of time on the scale on which a
virtio-fs device can operate. When using a DPU this is around
30-40us baseline without going to a remote server (4k, QD=1).
This patch changes the retrying behavior to immediately filling the
Virtio queue up again when a completion has been received.
This reduces the 99.9th percentile latencies in our tests by
60x and slightly increases the overall throughput, when using a
workload IO depth 2x the size of the Virtio queue and a
DPU-powered virtio-fs device (NVIDIA BlueField DPU).
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Yoray Zack <yorayz@nvidia.com>
Message-Id: <20240517190435.152096-3-pgootzen@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, when the enqueueing of a request or forget operation fails
with -ENOMEM, the enqueueing is retried after a timeout. This patch
removes this behavior and treats -ENOMEM in these scenarios like any
other error. By bubbling up the error to user space in the case of a
request, and by dropping the operation in case of a forget. This
behavior matches that of the FUSE layer above, and also simplifies the
error handling. The latter will come in handy for upcoming patches that
optimize the retrying of operations in case of -ENOSPC.
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Yoray Zack <yorayz@nvidia.com>
Message-Id: <20240517190435.152096-2-pgootzen@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert to new uid/gid option parsing helpers
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/4e1a4efa-4ca5-4358-acee-40efd07c3c44@redhat.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
As was done in
0200679fc7 ("tmpfs: verify {g,u}id mount options correctly")
we need to validate that the requested uid and/or gid is representable in
the filesystem's idmapping.
Cribbing from the above commit log,
The contract for {g,u}id mount options and {g,u}id values in general set
from userspace has always been that they are translated according to the
caller's idmapping. In so far, fuse has been doing the correct thing.
But since fuse is mountable in unprivileged contexts it is also
necessary to verify that the resulting {k,g}uid is representable in the
namespace of the superblock.
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/8f07d45d-c806-484d-a2e3-7a2199df1cd2@redhat.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Several new features here:
- virtio-net is finally supported in vduse.
- Virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmZN570PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2JUH/1K3fZOHymop6Y5Z3USFS7YdlF+dniedY/vg
TKyWERkXOlxq1d9DVxC0mN7tk72DweuWI0YJjLXofrEW1VuW29ecSbyFXxpeWJls
b7ErffxDAFRas5jkMCngD8TuFnbEegU0mGP5kbiHpEndBydQ2hH99Gg0x7swW+cE
xsvU5zonCCLwLGIP2DrVrn9qGOHtV6o8eZfVKDVXfvicn3lFBkUSxlwEYsO9RMup
aKxV4FT2Pb1yBicwBK4TH1oeEXqEGy1YLEn+kAHRbgoC/5L0/LaiqrkzwzwwOIPj
uPGkacf8CIbX0qZo5EzD8kvfcYL1xhU3eT9WBmpp2ZwD+4bINd4=
=nax1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-24-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit creates a multi-queue mapping at device bring-up.
The driver first attempts to use the existing MSI-X interrupt
affinities (previously disabled), and if not present, will distribute
the request queues evenly over the CPUs.
If the latter fails as well, all CPUs are mapped to request queue zero.
When a request is handed from FUSE to the virtio-fs device driver, the
driver will use the current CPU to index into the multi-queue mapping
and determine the optimal request queue to use.
We measured the performance of this patch with the fio benchmarking
tool, increasing the number of queues results in a significant speedup
for both read and write operations, demonstrating the effectiveness
of multi-queue support.
Host:
- Dell PowerEdge R760
- CPU: Intel(R) Xeon(R) Gold 6438M, 128 cores
- VM: KVM with 32 cores
Virtio-fs device:
- BlueField-3 DPU
- CPU: ARM Cortex-A78AE, 16 cores
- One thread per queue, each busy polling on one request queue
- Each queue is 1024 descriptors deep
Workload:
- fio, sequential read or write, ioengine=libaio, numjobs=32,
4GiB file per job, iodepth=8, bs=256KiB, runtime=30s
Performance Results:
+===========================+==========+===========+
| Number of queues | Fio read | Fio write |
+===========================+==========+===========+
| 1 request queue (GiB/s) | 6.1 | 4.6 |
+---------------------------+----------+-----------+
| 8 request queues (GiB/s) | 25.8 | 10.3 |
+---------------------------+----------+-----------+
| 16 request queues (GiB/s) | 30.9 | 19.5 |
+---------------------------+----------+-----------+
| 32 request queue (GiB/s) | 33.2 | 22.6 |
+---------------------------+----------+-----------+
| Speedup | 5.5x | 5x |
+---------------=-----------+----------+-----------+
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Signed-off-by: Yoray Zack <yorayz@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Virtio-fs devices might allocate significant resources to virtio queues
such as CPU cores that busy poll on the queue. The device indicates how
many request queues it can support and the driver should initialize the
number of queues that they want to utilize.
In this patch we limit the number of initialized request queues to the
number of CPUs, to limit the resource consumption on the device-side
and to prepare for the upcoming multi-queue patch.
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Signed-off-by: Yoray Zack <yorayz@nvidia.com>
Suggested-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The following warning was reported by lee bruce:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 8264 at fs/fuse/dev.c:300
fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300
Modules linked in:
CPU: 0 PID: 8264 Comm: ab2 Not tainted 6.9.0-rc7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300
......
Call Trace:
<TASK>
fuse_dev_do_read.constprop.0+0xd36/0x1dd0 fs/fuse/dev.c:1334
fuse_dev_read+0x166/0x200 fs/fuse/dev.c:1367
call_read_iter include/linux/fs.h:2104 [inline]
new_sync_read fs/read_write.c:395 [inline]
vfs_read+0x85b/0xba0 fs/read_write.c:476
ksys_read+0x12f/0x260 fs/read_write.c:619
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xce/0x260 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
......
</TASK>
The warning is due to the FUSE_NOTIFY_RESEND notify sent by the write()
syscall in the reproducer program and it happens as follows:
(1) calls fuse_dev_read() to read the INIT request
The read succeeds. During the read, bit FR_SENT will be set on the
request.
(2) calls fuse_dev_write() to send an USE_NOTIFY_RESEND notify
The resend notify will resend all processing requests, so the INIT
request is moved from processing list to pending list again.
(3) calls fuse_dev_read() with an invalid output address
fuse_dev_read() will try to copy the same INIT request to the output
address, but it will fail due to the invalid address, so the INIT
request is ended and triggers the warning in fuse_request_end().
Fix it by clearing FR_SENT when re-adding requests into pending list.
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/linux-fsdevel/58f13e47-4765-fce4-daf4-dffcc5ae2330@huaweicloud.com/T/#m091614e5ea2af403b259e7cea6a49e51b9ee07a7
Fixes: 760eac73f9 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When fuse_resend() moves the requests from processing lists to pending
list, it uses __set_bit() to set FR_PENDING bit in req->flags.
Using __set_bit() is not safe, because other functions may update
req->flags concurrently (e.g., request_wait_answer() may call
set_bit(FR_INTERRUPTED, &flags)).
Fix it by using set_bit() instead.
Fixes: 760eac73f9 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This adds support for the FS_IOC_ENABLE_VERITY and FS_IOC_MEASURE_VERITY
ioctls. The FS_IOC_READ_VERITY_METADATA is missing but from the
documentation, "This is a fairly specialized use case, and most fs-verity
users won’t need this ioctl."
Signed-off-by: Richard Fung <richardfung@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Nobody checks the error flag on fuse folios, so stop setting it.
Optimise the (optional) setting of the uptodate flag and clearing
of the lock flag by using folio_end_read().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The internal tag string doesn't contain a newline. Append one when
emitting the tag via sysfs.
[Stefan] Orthogonal to the newline issue, sysfs_emit(buf, "%s", fs->tag) is
needed to prevent format string injection.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: a8f62f50b4 ("virtiofs: export filesystem tags through sysfs")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
To allow us extending the interface in the future.
Fixes: 44350256ab ("fuse: implement ioctls to manage backing files")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This commit adds kernel-doc style comments with complete parameter
descriptions for the function cuse_process_init_reply.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FUSE attempts to detect server support for statx by trying it once and
setting no_statx=1 if it fails with ENOSYS, but consider the following
scenario:
- Userspace (e.g. sh) calls stat() on a file
* succeeds
- Userspace (e.g. lsd) calls statx(BTIME) on the same file
- request_mask = STATX_BASIC_STATS | STATX_BTIME
- first pass: sync=true due to differing cache_mask
- statx fails and returns ENOSYS
- set no_statx and retry
- retry sets mask = STATX_BASIC_STATS
- now mask == cache_mask; sync=false (time_before: still valid)
- so we take the "else if (stat)" path
- "err" is still ENOSYS from the failed statx call
Fix this by zeroing "err" before retrying the failed call.
Fixes: d3045530bd ("fuse: implement statx")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Danny Lin <danny@orbstack.dev>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Parallel dio write takes a negative refcount of fi->iocachectr and so does
open of file in passthrough mode.
The refcount of passthrough mode is associated with attach/detach of a
fuse_backing object to fuse inode.
For parallel dio write, the backing file is irrelevant, so the call to
fuse_inode_uncached_io_start() passes a NULL fuse_backing object.
Passing a NULL fuse_backing will result in false -EBUSY error if the file
is already open in passthrough mode.
Allow taking negative fi->iocachectr refcount with NULL fuse_backing,
because it does not conflict with an already attached fuse_backing object.
Fixes: 4a90451bbc ("fuse: implement open in passthrough mode")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is a confusion with fuse_file_uncached_io_{start,end} interface.
These helpers do two things when called from passthrough open()/release():
1. Take/drop negative refcount of fi->iocachectr (inode uncached io mode)
2. State change ff->iomode IOM_NONE <-> IOM_UNCACHED (file uncached open)
The calls from parallel dio write path need to take a reference on
fi->iocachectr, but they should not be changing ff->iomode state, because
in this case, the fi->iocachectr reference does not stick around until file
release().
Factor out helpers fuse_inode_uncached_io_{start,end}, to be used from
parallel dio write path and rename fuse_file_*cached_io_{start,end} helpers
to fuse_file_*cached_io_{open,release} to clarify the difference.
Fixes: 205c1d8026 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZfLjeQAKCRDh3BK/laaZ
PBYQAQDqYZzq91Kn5jdvjaSd+6I/+x7MDLOIP5hPX0HJLuBxWAEAqENoo4Of0GTC
ltW7DKrQy9E3CMp6VKSLVJPN4BYP9gk=
=GvOE
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add passthrough mode for regular file I/O.
This allows performing read and write (also via memory maps) on a
backing file without incurring the overhead of roundtrips to
userspace. For now this is only allowed to privileged servers, but
this limitation will go away in the future (Amir Goldstein)
- Fix interaction of direct I/O mode with memory maps (Bernd Schubert)
- Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi)
- Allow resending queued requests for server crash recovery (Zhao Chen)
- Misc fixes and cleanups
* tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits)
fuse: get rid of ff->readdir.lock
fuse: remove unneeded lock which protecting update of congestion_threshold
fuse: Fix missing FOLL_PIN for direct-io
fuse: remove an unnecessary if statement
fuse: Track process write operations in both direct and writethrough modes
fuse: Use the high bit of request ID for indicating resend requests
fuse: Introduce a new notification type for resend pending requests
fuse: add support for explicit export disabling
fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode()
fuse: fix typo for fuse_permission comment
fuse: Convert fuse_writepage_locked to take a folio
fuse: Remove fuse_writepage
virtio_fs: remove duplicate check if queue is broken
fuse: use FUSE_ROOT_ID in fuse_get_root_inode()
fuse: don't unhash root
fuse: fix root lookup with nonzero generation
fuse: replace remaining make_bad_inode() with fuse_make_bad()
virtiofs: drop __exit from virtio_fs_sysfs_exit()
fuse: implement passthrough for mmap
fuse: implement splice read/write passthrough
...
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4tQAKCRCRxhvAZXjc
ohnfAP4sm946PZfiC4y5Euk96WDC3hC8WCSBar+fpFmYVzeD9wEAy+NVCsjkMElz
vqNxwFULUwQjFxxvsM9gvhrgGUud1AE=
=UZk/
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull file locking updates from Christian Brauner:
"A few years ago struct file_lock_context was added to allow for
separate lists to track different types of file locks instead of using
a singly-linked list for all of them.
Now leases no longer need to be tracked using struct file_lock.
However, a lot of the infrastructure is identical for leases and locks
so separating them isn't trivial.
This splits a group of fields used by both file locks and leases into
a new struct file_lock_core. The new core struct is embedded in struct
file_lock. Coccinelle was used to convert a lot of the callers to deal
with the move, with the remaining 25% or so converted by hand.
Afterwards several internal functions in fs/locks.c are made to work
with struct file_lock_core. Ultimately this allows to split struct
file_lock into struct file_lock and struct file_lease. The file lease
APIs are then converted to take struct file_lease"
* tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (51 commits)
filelock: fix deadlock detection in POSIX locking
filelock: always define for_each_file_lock()
smb: remove redundant check
filelock: don't do security checks on nfsd setlease calls
filelock: split leases out of struct file_lock
filelock: remove temporary compatibility macros
smb/server: adapt to breakup of struct file_lock
smb/client: adapt to breakup of struct file_lock
ocfs2: adapt to breakup of struct file_lock
nfsd: adapt to breakup of struct file_lock
nfs: adapt to breakup of struct file_lock
lockd: adapt to breakup of struct file_lock
fuse: adapt to breakup of struct file_lock
gfs2: adapt to breakup of struct file_lock
dlm: adapt to breakup of struct file_lock
ceph: adapt to breakup of struct file_lock
afs: adapt to breakup of struct file_lock
9p: adapt to breakup of struct file_lock
filelock: convert seqfile handling to use file_lock_core
filelock: convert locks_translate_pid to take file_lock_core
...
The same protection is provided by file->f_pos_lock.
Note, this relies on the fact that file->f_mode has FMODE_ATOMIC_POS.
This flag is cleared by stream_open(), which would prevent locking of
f_pos_lock.
Prior to commit 7de64d521b ("fuse: break up fuse_open_common()")
FOPEN_STREAM on a directory would cause stream_open() to be called.
After this commit this is not done anymore, so f_pos_lock will always
be locked.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 670d21c6e1 ("fuse: remove reliance on bdi congestion") change how
congestion_threshold is used and lock in
fuse_conn_congestion_threshold_write is not needed anymore.
1. Access to supe_block is removed along with removing of bdi congestion.
Then down_read(&fc->killsb) which protecting access to super_block is no
needed.
2. Compare num_background and congestion_threshold without holding
bg_lock. Then there is no need to hold bg_lock to update
congestion_threshold.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Our user space filesystem relies on fuse to provide POSIX interface.
In our test, a known string is written into a file and the content
is read back later to verify correct data returned. We observed wrong
data returned in read buffer in rare cases although correct data are
stored in our filesystem.
Fuse kernel module calls iov_iter_get_pages2() to get the physical
pages of the user-space read buffer passed in read(). The pages are
not pinned to avoid page migration. When page migration occurs, the
consequence are two-folds.
1) Applications do not receive correct data in read buffer.
2) fuse kernel writes data into a wrong place.
Using iov_iter_extract_pages() to pin pages fixes the issue in our
test.
An auxiliary variable "struct page **pt_pages" is used in the patch
to prepare the 2nd parameter for iov_iter_extract_pages() since
iov_iter_get_pages2() uses a different type for the 2nd parameter.
[SzM] add iov_iter_extract_will_pin(ii) and unpin only if true.
Signed-off-by: Lei Huang <lei.huang@linux.intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FUSE remote locking code paths never add any locking state to
inode->i_flctx, so the locks_remove_posix() function called on
file close will return without calling fuse_setlk().
Therefore, as the if statement to be removed in this commit will
always be false, remove it for clearness.
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Due to the fact that fuse does not count the write IO of processes in the
direct and writethrough write modes, user processes cannot track
write_bytes through the “/proc/[pid]/io” path. For example, the system
tool iotop cannot count the write operations of the corresponding process.
Signed-off-by: Zhou Jifeng <zhoujifeng@kylinos.com.cn>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Some FUSE daemons want to know if the received request is a resend
request. The high bit of the fuse request ID is utilized for indicating
this, enabling the receiver to perform appropriate handling.
The init flag "FUSE_HAS_RESEND" is added to indicate this feature.
Signed-off-by: Zhao Chen <winters.zc@antgroup.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When a FUSE daemon panics and failover, we aim to minimize the impact on
applications by reusing the existing FUSE connection. During this process,
another daemon is employed to preserve the FUSE connection's file
descriptor. The new started FUSE Daemon will takeover the fd and continue
to provide service.
However, it is possible for some inflight requests to be lost and never
returned. As a result, applications awaiting replies would become stuck
forever. To address this, we can resend these pending requests to the
new started FUSE daemon.
This patch introduces a new notification type "FUSE_NOTIFY_RESEND", which
can trigger resending of the pending requests, ensuring they are properly
processed again.
Signed-off-by: Zhao Chen <winters.zc@antgroup.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
open_by_handle_at(2) can fail with -ESTALE with a valid handle returned
by a previous name_to_handle_at(2) for evicted fuse inodes, which is
especially common when entry_valid_timeout is 0, e.g. when the fuse
daemon is in "cache=none" mode.
The time sequence is like:
name_to_handle_at(2) # succeed
evict fuse inode
open_by_handle_at(2) # fail
The root cause is that, with 0 entry_valid_timeout, the dput() called in
name_to_handle_at(2) will trigger iput -> evict(), which will send
FUSE_FORGET to the daemon. The following open_by_handle_at(2) will send
a new FUSE_LOOKUP request upon inode cache miss since the previous inode
eviction. Then the fuse daemon may fail the FUSE_LOOKUP request with
-ENOENT as the cached metadata of the requested inode has already been
cleaned up during the previous FUSE_FORGET. The returned -ENOENT is
treated as -ESTALE when open_by_handle_at(2) returns.
This confuses the application somehow, as open_by_handle_at(2) fails
when the previous name_to_handle_at(2) succeeds. The returned errno is
also confusing as the requested file is not deleted and already there.
It is reasonable to fail name_to_handle_at(2) early in this case, after
which the application can fallback to open(2) to access files.
Since this issue typically appears when entry_valid_timeout is 0 which
is configured by the fuse daemon, the fuse daemon is the right person to
explicitly disable the export when required.
Also considering FUSE_EXPORT_SUPPORT actually indicates the support for
lookups of "." and "..", and there are existing fuse daemons supporting
export without FUSE_EXPORT_SUPPORT set, for compatibility, we add a new
INIT flag for such purpose.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For the sake of consistency, let's use these helpers to extract
{u,g}id_t values from k{u,g}id_t ones.
There are no functional changes, just to make code cleaner.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Found by chance while working on support for idmapped mounts in fuse.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The one remaining caller of fuse_writepage_locked() already has a folio,
so convert this function entirely. Saves a few calls to compound_head()
but no attempt is made to support large folios in this patch.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The writepage operation is deprecated as it leads to worse performance
under high memory pressure due to folios being written out in LRU order
rather than sequentially within a file. Use filemap_migrate_folio() to
support dirty folio migration instead of writepage.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
virtqueue_enable_cb() will call virtqueue_poll() which will check if
queue is broken at beginning, so remove the virtqueue_is_broken() call
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The root inode is assumed to be always hashed. Do not unhash the root
inode even if it is marked BAD.
Fixes: 5d069dbe8a ("fuse: fix bad inode")
Cc: <stable@vger.kernel.org> # v5.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The root inode has a fixed nodeid and generation (1, 0).
Prior to the commit 15db16837a ("fuse: fix illegal access to inode with
reused nodeid") generation number on lookup was ignored. After this commit
lookup with the wrong generation number resulted in the inode being
unhashed. This is correct for non-root inodes, but replacing the root
inode is wrong and results in weird behavior.
Fix by reverting to the old behavior if ignoring the generation for the
root inode, but issuing a warning in dmesg.
Reported-by: Antonio SJ Musumeci <trapexit@spawn.link>
Closes: https://lore.kernel.org/all/CAOQ4uxhek5ytdN8Yz2tNEOg5ea4NkBb4nk0FGPjPk_9nz-VG3g@mail.gmail.com/
Fixes: 15db16837a ("fuse: fix illegal access to inode with reused nodeid")
Cc: <stable@vger.kernel.org> # v5.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
virtio_fs_sysfs_exit() is called by:
- static int __init virtio_fs_init(void)
- static void __exit virtio_fs_exit(void)
Remove __exit from virtio_fs_sysfs_exit() since virtio_fs_init() is not
an __exit function.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402270649.GYjNX0yw-lkp@intel.com/
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An mmap request for a file open in passthrough mode, maps the memory
directly to the backing file.
An mmap of a file in direct io mode, usually uses cached mmap and puts
the inode in caching io mode, which denies new passthrough opens of that
inode, because caching io mode is conflicting with passthrough io mode.
For the same reason, trying to mmap a direct io file, while there is
a passthrough file open on the same inode will fail with -ENODEV.
An mmap of a file in direct io mode, also needs to wait for parallel
dio writes in-progress to complete.
If a passthrough file is opened, while an mmap of another direct io
file is waiting for parallel dio writes to complete, the wait is aborted
and mmap fails with -ENODEV.
A FUSE server that uses passthrough and direct io opens on the same inode
that may also be mmaped, is advised to provide a backing fd also for the
files that are open in direct io mode (i.e. use the flags combination
FOPEN_DIRECT_IO | FOPEN_PASSTHROUGH), so that mmap will always use the
backing file, even if read/write do not passthrough.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This allows passing fstests generic/249 and generic/591.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the backing file read/write helpers to implement read/write
passthrough to a backing file.
After read/write, we invalidate a/c/mtime/size attributes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
After getting a backing file id with FUSE_DEV_IOC_BACKING_OPEN ioctl,
a FUSE server can reply to an OPEN request with flag FOPEN_PASSTHROUGH
and the backing file id.
The FUSE server should reuse the same backing file id for all the open
replies of the same FUSE inode and open will fail (with -EIO) if a the
server attempts to open the same inode with conflicting io modes or to
setup passthrough to two different backing files for the same FUSE inode.
Using the same backing file id for several different inodes is allowed.
Opening a new file with FOPEN_DIRECT_IO for an inode that is already
open for passthrough is allowed, but only if the FOPEN_PASSTHROUGH flag
and correct backing file id are specified as well.
The read/write IO of such files will not use passthrough operations to
the backing file, but mmap, which does not support direct_io, will use
the backing file insead of using the page cache as it always did.
Even though all FUSE passthrough files of the same inode use the same
backing file as a backing inode reference, each FUSE file opens a unique
instance of a backing_file object to store the FUSE path that was used
to open the inode and the open flags of the specific open file.
The per-file, backing_file object is released along with the FUSE file.
The inode associated fuse_backing object is released when the last FUSE
passthrough file of that inode is released AND when the backing file id
is closed by the server using the FUSE_DEV_IOC_BACKING_CLOSE ioctl.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In preparation for opening file in passthrough mode, store the
fuse_open_out argument in ff->args to be passed into fuse_file_io_open()
with the optional backing_id member.
This will be used for setting up passthrough to backing file on open
reply with FOPEN_PASSTHROUGH flag and a valid backing_id.
Opening a file in passthrough mode may fail for several reasons, such as
missing capability, conflicting open flags or inode in caching mode.
Return EIO from fuse_file_io_open() in those cases.
The combination of FOPEN_PASSTHROUGH and FOPEN_DIRECT_IO is allowed -
it mean that read/write operations will go directly to the server,
but mmap will be done to the backing file.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FUSE server calls the FUSE_DEV_IOC_BACKING_OPEN ioctl with a backing file
descriptor. If the call succeeds, a backing file identifier is returned.
A later change will be using this backing file id in a reply to OPEN
request with the flag FOPEN_PASSTHROUGH to setup passthrough of file
operations on the open FUSE file to the backing file.
The FUSE server should call FUSE_DEV_IOC_BACKING_CLOSE ioctl to close the
backing file by its id.
This can be done at any time, but if an open reply with FOPEN_PASSTHROUGH
flag is still in progress, the open may fail if the backing file is
closed before the fuse file was opened.
Setting up backing files requires a server with CAP_SYS_ADMIN privileges.
For the backing file to be successfully setup, the backing file must
implement both read_iter and write_iter file operations.
The limitation on the level of filesystem stacking allowed for the
backing file is enforced before setting up the backing file.
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
