Return good group when it's found in loop to remove futher check if good
group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove ext4_set_bit_atomic and ext4_clear_bit_atomic which are defined but not
used.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-8-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace the traditional ternary conditional operator with with max()/min()
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The return at end of void function is unnecessary, just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove unnecessary NULL
initialization of grp and futher check if good group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.
Fixes: 5354b2af34 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace CR_FAST with ext4_mb_cr_expensive() inline function for better
readability. This function returns true if the criteria is one of the
expensive/slower ones where lots of disk IO/prefetching is acceptable.
No functional changes are intended in this patch.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230630085927.140137-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.
For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.
Otherwise this is just Kconfig and ifdef changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block_page_mkwrite_return is neither block nor mkwrite specific, and
should not be under CONFIG_BLOCK. Move it to mm.h and rename it to
vmf_fs_error.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801172201.1923299-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The multi-mount protection kthread checks for read-only filesystem and
aborts in that case. The remount code actually handles stopping of the
kthread on remount so the only purpose of the check is in case of
emergency remount read-only. Replace the check for read-only filesystem
with a check for shutdown filesystem as running MMP on such is risky
anyway and it makes ordering of things during remount simpler.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-11-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2 code will quickly return without doing anything when there's
nothing to commit so there's no point in the read-only check in
ext4_force_commit(). Just drop it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We should not have dirty inodes on read-only filesystem. Also silently
bailing without writing anything would be a problem when we enable
quotas during remount while the filesystem is read-only. So drop the
read-only check.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We better should not be initializing inode tables on read-only
filesystem. The following transaction start will warn us and make the
function bail anyway so drop the pointless check.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that filesystem abort marks the filesystem as shutdown, we shouldn't
be ever hitting the sb_rdonly() check in ext4_journal_check_start().
Since this is a suitable place for catching all sorts of programming
errors, convert the check to WARN_ON instead of dropping it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the filesystem gets first remounted read-only and then unmounted,
ext4_quota_off() will try to start a transaction (and fail) on read-only
filesystem to cleanup inode flags for legacy quota files. Just bail
before trying to start a transaction instead since that is going to
issue a warning.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT4_MF_FS_ABORTED flag has practically the same intent as
EXT4_FLAGS_SHUTDOWN flag. The shutdown flag is checked in many more
places than the aborted flag which is mostly the historical artifact
where we were relying on SB_RDONLY checks instead of the aborted flag
checks. There are only three places - ext4_sync_file(),
__ext4_remount(), and mballoc debug code - which check aborted flag and
not shutdown flag and this is arguably a bug. Avoid these
inconsistencies by removing EXT4_MF_FS_ABORTED flag and using
EXT4_FLAGS_SHUTDOWN everywhere.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
'abort' mount option is the only mount option that has special handling
and sets a bit in sbi->s_mount_flags. There is not strong reason for
that so just simplify the code and make 'abort' set a bit in
sbi->s_mount_opt2 as any other mount option. This simplifies the code
and will allow us to drop EXT4_MF_FS_ABORTED completely in the following
patch.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_forced_shutdown() takes struct ext4_sb_info but most
callers need to get it from struct super_block anyway. So just pass in
struct super_block to save all callers from some boilerplate code. No
functional changes.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_freeze() and ext4_unfreeze() checks for sb_rdonly(). However this
check is pointless as VFS already checks for read-only filesystem before
calling filesystem specific methods. Remove the pointless checks.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230616165109.21695-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Let's say we want to allocate 2 blocks starting from 4294966386, after
predicting the file size, start is aligned to 4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.
This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
<TASK>
ext4_mb_use_best_found+0x203/0x2f0
ext4_mb_try_best_found+0x163/0x240
ext4_mb_regular_allocator+0x158/0x1550
ext4_mb_new_blocks+0x86a/0xe10
ext4_ext_map_blocks+0xb0c/0x13a0
ext4_map_blocks+0x2cd/0x8f0
ext4_iomap_begin+0x27b/0x400
iomap_iter+0x222/0x3d0
__iomap_dio_rw+0x243/0xcb0
iomap_dio_rw+0x16/0x80
=========================================================
A simple reproducer demonstrating the problem:
mkfs.ext4 -F /dev/sda -b 4096 100M
mount /dev/sda /tmp/test
fallocate -l1M /tmp/test/tmp
fallocate -l10M /tmp/test/file
fallocate -i -o 1M -l16777203M /tmp/test/file
fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
sleep 10 && killall -9 fsstress
rm -f /tmp/test/tmp
xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"
We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.
Cc: stable@kernel.org # 6.4
Fixes: 93cdf49f6e ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of 4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.
Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-40-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.
To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:
1. It must have it's logical start immediately to the left of
(ie less than) original logical start.
2. It must not be deleted
To find this pa we use the following traversal method:
1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.
2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.
3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.
4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.
This approach also takes care of having deleted PAs in the tree.
(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)
[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/
Cc: stable@kernel.org # 6.4
Fixes: 3872778664 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_mb_choose_next_group_best_avail(), we want the start order to be
1 less than goal length and the min_order to be, at max, 1 more than the
original length. This commit fixes an off by one issue that arose due to
the fact that 1 << fls(n) > (n).
After all the processing:
order = 1 order below goal len
min_order = maximum of the three:-
- order - trim_order
- 1 order below B2C(s_stripe)
- 1 order above original len
Cc: stable@kernel.org
Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted. This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied. If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region. The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmScT18ACgkQnJ2qBz9k
QNnlqAf/bIU+I3Qd3EUpzWrOXEyRjaUggRnb4ibIH2I6DjSAP4wtm5wiG/+wjDFe
v+gdRd8PlAlHbZJvW3WUxeSzWendqd78i2lgwFN+s2QCVtQSUsNy7mtUvOL2b1zy
Kf35vTNbkKE0TevoqHZmoT/mehSBj6Zt4k5POMalfxwnJHoVF25OqHEQQc8vnOjv
as/uMaHVwK/Q0pMafTz8vt9Fogkdqe6A+qLLxTvG6iQKd2Z0NdYK2GxR0oTVhDOK
Ly+h1evRldgOcrishrje00LZT8SznUQkWBjIpPN/HbXR1qc5Jk+BYJUqT2jg7zVd
EW61U79nsaugpTUicpTUIluUZ7/QKA==
=toKL
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull misc filesystem updates from Jan Kara:
- Rewrite kmap_local() handling in ext2
- Convert ext2 direct IO path to iomap (with some infrastructure tweaks
associated with that)
- Convert two boilerplate licenses in udf to SPDX identifiers
- Other small udf, ext2, and quota fixes and cleanups
* tag 'fs_for_v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix uninitialized array access for some pathnames
ext2: Drop fragment support
quota: fix warning in dqgrab()
quota: Properly disable quotas when add_dquot_ref() fails
fs: udf: udftime: Replace LGPL boilerplate with SPDX identifier
fs: udf: Replace GPL 2.0 boilerplate license notice with SPDX identifier
fs: Drop wait_unfrozen wait queue
ext2_find_entry()/ext2_dotdot(): callers don't need page_addr anymore
ext2_{set_link,delete_entry}(): don't bother with page_addr
ext2_put_page(): accept any pointer within the page
ext2_get_page(): saner type
ext2: use offset_in_page() instead of open-coding it as subtraction
ext2_rename(): set_link and delete_entry may fail
ext2: Add direct-io trace points
ext2: Move direct-io to use iomap
ext2: Use generic_buffers_fsync() implementation
ext4: Use generic_buffers_fsync_noflush() implementation
fs/buffer.c: Add generic_buffers_fsync*() implementation
ext2/dax: Fix ext2_setsize when len is page aligned
journalling, and block allocator subsystems. Also improve performance
for parallel DIO overwrites.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmSaIWAACgkQ8vlZVpUN
gaODEAf9GLk68DvU9iOhgJ1p/lMIqtbY0vvB1aeiQg7Z99mk/Vc//R5qQvtO2oN5
9G4OMSGKoUO0x9OlvDIw6za1BsE1pGHyBLmei7PO1JpHop6b6hKj+WQVPWb43v15
TI0vIkWzwJI2eIxsTqvpMkgwZ3aNL9c52xFyjwk/6lAsw4y2wxEls/NZhhE2tAXF
w/RFmI9RC/AZy1JX3VeruzeiSvAq+JAnsW8iNIoN5nBvWU7yXLA3b4mcoWWrCQ5E
sKqOkhTeobhYsAie6dxGhri/JrL1HwPOpJ8SWWmrlLWXoMVx1rXxW3OnxIAEl9sz
05n7Z+6LvI6aEk+rnjCqt4Z1cpIIEA==
=cAq/
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various cleanups and bug fixes in ext4's extent status tree,
journalling, and block allocator subsystems.
Also improve performance for parallel DIO overwrites"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (55 commits)
ext4: avoid updating the superblock on a r/o mount if not needed
jbd2: skip reading super block if it has been verified
ext4: fix to check return value of freeze_bdev() in ext4_shutdown()
ext4: refactoring to use the unified helper ext4_quotas_off()
ext4: turn quotas off if mount failed after enabling quotas
ext4: update doc about journal superblock description
ext4: add journal cycled recording support
jbd2: continue to record log between each mount
jbd2: remove j_format_version
jbd2: factor out journal initialization from journal_get_superblock()
jbd2: switch to check format version in superblock directly
jbd2: remove unused feature macros
ext4: ext4_put_super: Remove redundant checking for 'sbi->s_journal_bdev'
ext4: Fix reusing stale buffer heads from last failed mounting
ext4: allow concurrent unaligned dio overwrites
ext4: clean up mballoc criteria comments
ext4: make ext4_zeroout_es() return void
ext4: make ext4_es_insert_extent() return void
ext4: make ext4_es_insert_delayed_block() return void
ext4: make ext4_es_remove_extent() return void
...
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
This was noticed by a user who noticied that the mtime of a file
backing a loopback device was getting bumped when the loopback device
is mounted read/only. Note: This doesn't show up when doing a
loopback mount of a file directly, via "mount -o ro /tmp/foo.img
/mnt", since the loop device is set read-only when mount automatically
creates loop device. However, this is noticeable for a LUKS loop
device like this:
% cryptsetup luksOpen /tmp/foo.img test
% mount -o ro /dev/loop0 /mnt ; umount /mnt
or, if LUKS is not in use, if the user manually creates the loop
device like this:
% losetup /dev/loop0 /tmp/foo.img
% mount -o ro /dev/loop0 /mnt ; umount /mnt
The modified mtime causes rsync to do a rolling checksum scan of the
file on the local and remote side, incrementally increasing the time
to rsync the not-modified-but-touched image file.
Fixes: eee00237fa ("ext4: commit super block if fs record error when journal record without error")
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/ZIauBR7YiV3rVAHL@glitch
Reported-by: Sean Greenslade <sean@seangreenslade.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_quota_off_umount() to ext4_quotas_off(), and add type
parameter to replace open code in ext4_enable_quotas().
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230327141630.156875-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Always enable 'JBD2_CYCLE_RECORD' journal option on ext4, letting the
jbd2 continue to record new journal transactions from the recovered
journal head or the checkpointed transactions in the previous mount.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230322013353.1843306-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As discussed in [1], 'sbi->s_journal_bdev != sb->s_bdev' will always
become true if sbi->s_journal_bdev exists. Filesystem block device and
journal block device are both opened with 'FMODE_EXCL' mode, so these
two devices can't be same one. Then we can remove the redundant checking
'sbi->s_journal_bdev != sb->s_bdev' if 'sbi->s_journal_bdev' exists.
[1] https://lore.kernel.org/lkml/f86584f6-3877-ff18-47a1-2efaa12d18b2@huawei.com/
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-3-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Following process makes ext4 load stale buffer heads from last failed
mounting in a new mounting operation:
mount_bdev
ext4_fill_super
| ext4_load_and_init_journal
| ext4_load_journal
| jbd2_journal_load
| load_superblock
| journal_get_superblock
| set_buffer_verified(bh) // buffer head is verified
| jbd2_journal_recover // failed caused by EIO
| goto failed_mount3a // skip 'sb->s_root' initialization
deactivate_locked_super
kill_block_super
generic_shutdown_super
if (sb->s_root)
// false, skip ext4_put_super->invalidate_bdev->
// invalidate_mapping_pages->mapping_evict_folio->
// filemap_release_folio->try_to_free_buffers, which
// cannot drop buffer head.
blkdev_put
blkdev_put_whole
if (atomic_dec_and_test(&bdev->bd_openers))
// false, systemd-udev happens to open the device. Then
// blkdev_flush_mapping->kill_bdev->truncate_inode_pages->
// truncate_inode_folio->truncate_cleanup_folio->
// folio_invalidate->block_invalidate_folio->
// filemap_release_folio->try_to_free_buffers will be skipped,
// dropping buffer head is missed again.
Second mount:
ext4_fill_super
ext4_load_and_init_journal
ext4_load_journal
ext4_get_journal
jbd2_journal_init_inode
journal_init_common
bh = getblk_unmovable
bh = __find_get_block // Found stale bh in last failed mounting
journal->j_sb_buffer = bh
jbd2_journal_load
load_superblock
journal_get_superblock
if (buffer_verified(bh))
// true, skip journal->j_format_version = 2, value is 0
jbd2_journal_recover
do_one_pass
next_log_block += count_tags(journal, bh)
// According to journal_tag_bytes(), 'tag_bytes' calculating is
// affected by jbd2_has_feature_csum3(), jbd2_has_feature_csum3()
// returns false because 'j->j_format_version >= 2' is not true,
// then we get wrong next_log_block. The do_one_pass may exit
// early whenoccuring non JBD2_MAGIC_NUMBER in 'next_log_block'.
The filesystem is corrupted here, journal is partially replayed, and
new journal sequence number actually is already used by last mounting.
The invalidate_bdev() can drop all buffer heads even racing with bare
reading block device(eg. systemd-udev), so we can fix it by invalidating
bdev in error handling path in __ext4_fill_super().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217171
Fixes: 25ed6e8a54 ("jbd2: enable journal clients to enable v2 checksumming")
Cc: stable@vger.kernel.org # v3.5
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-2-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We've had reports of significant performance regression of sub-block
(unaligned) direct writes due to the added exclusivity restrictions
in ext4. The purpose of the exclusivity requirement for unaligned
direct writes is to avoid data corruption caused by unserialized
partial block zeroing in the iomap dio layer across overlapping
writes.
XFS has similar requirements for the same underlying reasons, yet
doesn't suffer the extreme performance regression that ext4 does.
The reason for this is that XFS utilizes IOMAP_DIO_OVERWRITE_ONLY
mode, which allows for optimistic submission of concurrent unaligned
I/O and kicks back writes that require partial block zeroing such
that they can be submitted in a safe, exclusive context. Since ext4
already performs most of these checks pre-submission, it can support
something similar without necessarily relying on the iomap flag and
associated retry mechanism.
Update the dio write submission path to allow concurrent submission
of unaligned direct writes that are purely overwrite and so will not
require block zeroing. To improve readability of the various related
checks, move the unaligned I/O handling down into
ext4_dio_write_checks(), where the dio draining and force wait logic
can immediately follow the locking requirement checks. Finally, the
IOMAP_DIO_OVERWRITE_ONLY flag is set to enable a warning check as a
precaution should the ext4 overwrite logic ever become inconsistent
with the zeroing expectations of iomap dio.
The performance improvement of sub-block direct write I/O is shown
in the following fio test on a 64xcpu guest vm:
Test: fio --name=test --ioengine=libaio --direct=1 --group_reporting
--overwrite=1 --thread --size=10G --filename=/mnt/fio
--readwrite=write --ramp_time=10s --runtime=60s --numjobs=8
--blocksize=2k --iodepth=256 --allow_file_create=0
v6.2: write: IOPS=4328, BW=8724KiB/s
v6.2 (patched): write: IOPS=801k, BW=1565MiB/s
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230314130759.642710-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Line wrap and slightly clarify the comments describing mballoc's
cirtiera.
Define EXT4_MB_NUM_CRS as part of the enum, so that it will
automatically get updated when criteria is added or removed.
Also fix a potential unitialized use of 'cr' variable if
CONFIG_EXT4_DEBUG is enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After ext4_es_insert_extent() returns void, the return value in
ext4_zeroout_es() is also unnecessary, so make it return void too.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-13-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now ext4_es_insert_extent() never return error, so make it return void.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-12-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Similar to in ext4_es_insert_delayed_block(), we use preallocations that
do not fail to avoid inconsistencies, but we do not care about es that are
not must be kept, and we return 0 even if such es memory allocation fails.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-9-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Similar to in ext4_es_remove_extent(), we use a no-fail preallocation
to avoid inconsistencies, except that here we may have to preallocate
two extent_status.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-8-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If __es_remove_extent() returns an error it means that when splitting
extent, allocating an extent that must be kept failed, where returning
an error directly would cause the extent tree to be inconsistent. So we
use GFP_NOFAIL to pre-allocate an extent_status and pass it to
__es_remove_extent() to avoid this problem.
In addition, since the allocated memory is outside the i_es_lock, the
extent_status tree may change and the pre-allocated extent_status is
no longer needed, so we release the pre-allocated extent_status when
es->es_len is not initialized.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When splitting extent, if the second extent can not be dropped, we return
-ENOMEM and use GFP_NOFAIL to preallocate an extent_status outside of
i_es_lock and pass it to __es_remove_extent() to be used as the second
extent. This ensures that __es_remove_extent() is executed successfully,
thus ensuring consistency in the extent status tree. If the second extent
is not undroppable, we simply drop it and return 0. Then retry is no longer
necessary, remove it.
Now, __es_remove_extent() will always remove what it should, maybe more.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pass a extent_status pointer prealloc to __es_insert_extent(). If the
pointer is non-null, it is used directly when a new extent_status is
needed to avoid memory allocation failures.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out __es_alloc_extent() and __es_free_extent(), which only allocate
and free extent_status in these two helpers.
The ext4_es_alloc_extent() function is split into __es_alloc_extent()
and ext4_es_init_extent(). In __es_alloc_extent() we allocate memory using
GFP_KERNEL | __GFP_NOFAIL | __GFP_ZERO if the memory allocation cannot
fail, otherwise we use GFP_ATOMIC. and the ext4_es_init_extent() is used to
initialize extent_status and update related variables after a successful
allocation.
This is to prepare for the use of pre-allocated extent_status later.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the extent status tree, we have extents which we can just drop without
issues and extents we must not drop - this depends on the extent's status
- currently ext4_es_is_delayed() extents must stay, others may be dropped.
A helper function is added to help determine if the current extent can
be dropped, although only ext4_es_is_delayed() extents cannot be dropped
currently.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In our fault injection test, we create an ext4 file, migrate it to
non-extent based file, then punch a hole and finally trigger a WARN_ON
in the ext4_da_update_reserve_space():
EXT4-fs warning (device sda): ext4_da_update_reserve_space:369:
ino 14, used 11 with only 10 reserved data blocks
When writing back a non-extent based file, if we enable delalloc, the
number of reserved blocks will be subtracted from the number of blocks
mapped by ext4_ind_map_blocks(), and the extent status tree will be
updated. We update the extent status tree by first removing the old
extent_status and then inserting the new extent_status. If the block range
we remove happens to be in an extent, then we need to allocate another
extent_status with ext4_es_alloc_extent().
use old to remove to add new
|----------|------------|------------|
old extent_status
The problem is that the allocation of a new extent_status failed due to a
fault injection, and __es_shrink() did not get free memory, resulting in
a return of -ENOMEM. Then do_writepages() retries after receiving -ENOMEM,
we map to the same extent again, and the number of reserved blocks is again
subtracted from the number of blocks in that extent. Since the blocks in
the same extent are subtracted twice, we end up triggering WARN_ON at
ext4_da_update_reserve_space() because used > ei->i_reserved_data_blocks.
For non-extent based file, we update the number of reserved blocks after
ext4_ind_map_blocks() is executed, which causes a problem that when we call
ext4_ind_map_blocks() to create a block, it doesn't always create a block,
but we always reduce the number of reserved blocks. So we move the logic
for updating reserved blocks to ext4_ind_map_blocks() to ensure that the
number of reserved blocks is updated only after we do succeed in allocating
some new blocks.
Fixes: 5f634d064c ("ext4: Fix quota accounting error with fallocate")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mballoc criterias have historically been called by numbers
like CR0, CR1... however this makes it confusing to understand
what each criteria is about.
Change these criterias from numbers to symbolic names and add
relevant comments. While we are at it, also reformat and add some
comments to ext4_seq_mb_stats_show() for better readability.
Additionally, define CR_FAST which signifies the criteria
below which we can make quicker decisions like:
* quitting early if (free block < requested len)
* avoiding to scan free extents smaller than required len.
* avoiding to initialize buddy cache and work with existing cache
* limiting prefetches
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/a2dc6ec5aea5e5e68cf8e788c2a964ffead9c8b0.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CR1_5 aims to optimize allocations which can't be satisfied in CR1. The
fact that we couldn't find a group in CR1 suggests that it would be
difficult to find a continuous extent to compleltely satisfy our
allocations. So before falling to the slower CR2, in CR1.5 we
proactively trim the the preallocations so we can find a group with
(free / fragments) big enough. This speeds up our allocation at the
cost of slightly reduced preallocation.
The patch also adds a new sysfs tunable:
* /sys/fs/ext4/<partition>/mb_cr1_5_max_trim_order
This controls how much CR1.5 can trim a request before falling to CR2.
For example, for a request of order 7 and max trim order 2, CR1.5 can
trim this upto order 5.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/150fdf65c8e4cc4dba71e020ce0859bcf636a5ff.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make the logic of searching average fragment list of a given order reusable
by abstracting it out to a differnet function. This will also avoid
code duplication in upcoming patches.
No functional changes.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/028c11d95b17ce0285f45456709a0ca922df1b83.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before this patch, the call stack in ext4_run_li_request is as follows:
/*
* nr = no. of BGs we want to fetch (=s_mb_prefetch)
* prefetch_ios = no. of BGs not uptodate after
* ext4_read_block_bitmap_nowait()
*/
next_group = ext4_mb_prefetch(sb, group, nr, prefetch_ios);
ext4_mb_prefetch_fini(sb, next_group prefetch_ios);
ext4_mb_prefetch_fini() will only try to initialize buddies for BGs in
range [next_group - prefetch_ios, next_group). This is incorrect since
sometimes (prefetch_ios < nr), which causes ext4_mb_prefetch_fini() to
incorrectly ignore some of the BGs that might need initialization. This
issue is more notable now with the previous patch enabling "fetching" of
BLOCK_UNINIT BGs which are marked buffer_uptodate by default.
Fix this by passing nr to ext4_mb_prefetch_fini() instead of
prefetch_ios so that it considers the right range of groups.
Similarly, make sure we don't pass nr=0 to ext4_mb_prefetch_fini() in
ext4_mb_regular_allocator() since we might have prefetched BLOCK_UNINIT
groups that would need buddy initialization.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/05e648ae04ec5b754207032823e9c1de9a54f87a.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, ext4_mb_prefetch() and ext4_mb_prefetch_fini() skip
BLOCK_UNINIT groups since fetching their bitmaps doesn't need disk IO.
As a consequence, we end not initializing the buddy structures and CR0/1
lists for these BGs, even though it can be done without any disk IO
overhead. Hence, don't skip such BGs during prefetch and prefetch_fini.
This improves the accuracy of CR0/1 allocation as earlier, we could have
essentially empty BLOCK_UNINIT groups being ignored by CR0/1 due to their buddy
not being initialized, leading to slower CR2 allocations. With this patch CR0/1
will be able to discover these groups as well, thus improving performance.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/dc3130b8daf45ffe63d8a3c1edcf00eb8ba70e1f.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we are inside ext4_mb_complex_scan_group() in CR1, we can be sure
that this group has atleast 1 big enough continuous free extent to satisfy
our request because (free / fragments) > goal length.
Hence, instead of wasting time looping over smaller free extents, only
try to consider the free extent if we are sure that it has enough
continuous free space to satisfy goal length. This is particularly
useful when scanning highly fragmented BGs in CR1 as, without this
patch, the allocator might stop scanning early before reaching the big
enough free extent (due to ac_found > mb_max_to_scan) which causes us to
uncessarily trim the request.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a5473df4517c53ec940bc9b603ef83a547032a32.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Track number of allocations where the length of blocks allocated is equal to the
length of goal blocks (post normalization). This metric could be useful if
making changes to the allocator logic in the future as it could give us
visibility into how often do we trim our requests.
PS: ac_b_ex.fe_len might get modified due to preallocation efforts and
hence we use ac_f_ex.fe_len instead since we want to compare how much the
allocator was able to actually find.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/343620e2be8a237239ea2613a7a866ee8607e973.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This gives better visibility into the number of extents scanned in each
particular CR. For example, this information can be used to see how out
block group scanning logic is performing when the BG is fragmented.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/55bb6d80f6e22ed2a5a830aa045572bdffc8b1b9.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert criteria to be an enum so it easier to maintain and
update the tracefiles to use enum names. This change also makes
it easier to insert new criterias in the future.
There is no functional change in this patch.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5d82fd467bdf70ea45bdaef810af3b146013946c.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_stats & ext4_mb_max_to_scan are never used. We use
sbi->s_mb_stats and sbi->s_mb_max_to_scan instead.
Hence kill these extern declarations.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/928b3142062172533b6d1b5a94de94700590fef3.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There will be changes coming in future patches which will introduce a new
criteria for block allocation. This removes the useless setting of ac_criteria.
AFAIU, this might be only used to differentiate between whether a preallocated
blocks was allocated or was regular allocator called for allocating blocks.
Hence this also adds the debug prints to identify what type of block allocation
was done in ext4_mb_show_ac().
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1dbae05617519cb6202f1b299c9d1be3e7cda763.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Function ext4_free_blocks_simple needs count in cluster. Function
ext4_free_blocks accepts count in block. Convert count to cluster
to fix the mismatch.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-12-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_free_blocks will retrieve block from bh if block parameter is zero.
Retrieve block before ext4_free_blocks_simple to avoid potentially
passing wrong block to ext4_free_blocks_simple.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
-----BEGIN PGP SIGNATURE-----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=KhW4
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux
Pull splice updates from Jens Axboe:
"This kills off ITER_PIPE to avoid a race between truncate,
iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
memory corruption.
Instead, we either use (a) filemap_splice_read(), which invokes the
buffered file reading code and splices from the pagecache into the
pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
into it and then pushes the filled pages into the pipe; or (c) handle
it in filesystem-specific code.
Summary:
- Rename direct_splice_read() to copy_splice_read()
- Simplify the calculations for the number of pages to be reclaimed
in copy_splice_read()
- Turn do_splice_to() into a helper, vfs_splice_read(), so that it
can be used by overlayfs and coda to perform the checks on the
lower fs
- Make vfs_splice_read() jump to copy_splice_read() to handle
direct-I/O and DAX
- Provide shmem with its own splice_read to handle non-existent pages
in the pagecache. We don't want a ->read_folio() as we don't want
to populate holes, but filemap_get_pages() requires it
- Provide overlayfs with its own splice_read to call down to a lower
layer as overlayfs doesn't provide ->read_folio()
- Provide coda with its own splice_read to call down to a lower layer
as coda doesn't provide ->read_folio()
- Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
and random files as they just copy to the output buffer and don't
splice pages
- Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation
- Make cifs use filemap_splice_read()
- Replace pointers to generic_file_splice_read() with pointers to
filemap_splice_read() as DIO and DAX are handled in the caller;
filesystems can still provide their own alternate ->splice_read()
op
- Remove generic_file_splice_read()
- Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
was the only user"
* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU4NwAKCRCRxhvAZXjc
ordqAP0RmZEkUA5p98pK+0FEFIsS2S8qChh6YHQHP+hF606FGgEAivb3UPRm9p58
kRb5yK0/oXDUxGv7A+x+SIMVbcRyLgw=
=pi6N
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.rename.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rename locking updates from Christian Brauner:
"This contains the work from Jan to fix problems with cross-directory
renames originally reported in [1].
To quickly sum it up some filesystems (so far we know at least about
ext4, udf, f2fs, ocfs2, likely also reiserfs, gfs2 and others) need to
lock the directory when it is being renamed into another directory.
This is because we need to update the parent pointer in the directory
in that case and if that races with other operations on the directory,
in particular a conversion from one directory format into another, bad
things can happen.
So far we've done the locking in the filesystem code but recently
Darrick pointed out in [2] that the RENAME_EXCHANGE case was missing.
That one is particularly nasty because RENAME_EXCHANGE can arbitrarily
mix regular files and directories and proper lock ordering is not
achievable in the filesystems alone.
This patch set adds locking into vfs_rename() so that not only parent
directories but also moved inodes, regardless of whether they are
directories or not, are locked when calling into the filesystem.
This means establishing a locking order for unrelated directories. New
helpers are added for this purpose and our documentation is updated to
cover this in detail.
The locking is now actually easier to follow as we now always lock
source and target. We've always locked the target independent of
whether it was a directory or file and we've always locked source if
it was a regular file. The exact details for why this came about can
be found in [3] and [4]"
Link: https://lore.kernel.org/all/20230117123735.un7wbamlbdihninm@quack3 [1]
Link: https://lore.kernel.org/all/20230517045836.GA11594@frogsfrogsfrogs [2]
Link: https://lore.kernel.org/all/20230526-schrebergarten-vortag-9cd89694517e@brauner [3]
Link: https://lore.kernel.org/all/20230530-seenotrettung-allrad-44f4b00139d4@brauner [4]
* tag 'v6.5/vfs.rename.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Restrict lock_two_nondirectories() to non-directory inodes
fs: Lock moved directories
fs: Establish locking order for unrelated directories
Revert "f2fs: fix potential corruption when moving a directory"
Revert "udf: Protect rename against modification of moved directory"
ext4: Remove ext4 locking of moved directory
ext4_blkdev_remove() passes a wrong holder pointer to blkdev_put() which
triggers a warning there. Fix it.
Fixes: 2736e8eeb0 ("block: use the holder as indication for exclusive opens")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230622165107.13687-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of the callers already have a folio; convert reiserfs_write_end() to
have a folio. Removes a couple of hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20230612210141.730128-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ext4_mb_new_blocks_simple ignores the group before goal, so it will fail
if free blocks reside in group before goal. Try all groups to avoid
unexpected failure.
Search finishes either if any free block is found or if no available
blocks are found. Simpliy check "i >= max" to distinguish the above
cases.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-8-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For ext4_block_group and ext4_block_group_offset, there are only
declaration without definition. Just remove them.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_use_preallocated will ignore the demand to alloc goal blocks,
although the EXT4_MB_HINT_GOAL_ONLY is requested.
For group pa, ext4_mb_group_or_file will not set EXT4_MB_HINT_GROUP_ALLOC
if EXT4_MB_HINT_GOAL_ONLY is set. So we will not alloc goal blocks from
group pa if EXT4_MB_HINT_GOAL_ONLY is set.
For inode pa, ext4_mb_pa_goal_check is added to check if free extent in
found inode pa meets goal blocks when EXT4_MB_HINT_GOAL_ONLY is set.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Suggested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stripe is misused in block unit and in cluster unit in different code
paths. User awared of stripe maybe not awared of bigalloc feature, so
treat stripe only in block unit to fix this.
Besides, it's hard to get stripe aligned blocks (start and length are both
aligned with stripe) if stripe is not aligned with cluster, just disable
stripe and alert user in this case to simpfy the code and avoid
unnecessary work to get stripe aligned blocks which likely to be failed.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We need start in block unit while fe_start is in cluster unit. Use
ext4_grp_offs_to_block helper to convert fe_start to get start in
block unit.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "i" returned from mb_find_next_zero_bit is in cluster unit and we
need offset "block" corresponding to "i" in block unit. Convert "i" to
block unit to fix the unit mismatch.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
NRL_CHECK_SIZE will compare input req and size, so req and size should
be in same unit. Input req "fe_len" is in cluster unit while input
size "(8<<20)>>bsbits" is in block unit. Convert "fe_len" to block
unit to fix the mismatch.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that fsverity supports working on entire folios, call
fsverity_verify_folio() instead of fsverity_verify_page()
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230516192713.1070469-1-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_write_inline_data_end() is completely converted to work with folio.
Also all callers of ext4_write_inline_data_end() already works on folio
except ext4_da_write_end(). Mostly for consistency and saving few
instructions maybe, this patch just converts ext4_da_write_end() to work
with folio which makes the last caller of ext4_write_inline_data_end()
also converted to work with folio.
We then make ext4_write_inline_data_end() take folio instead of page.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/1bcea771720ff451a5a59b3f1bcd5fae51cb7ce7.1684122756.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_readpage() is converted to ext4_read_folio() hence change the
related tracepoint from trace_ext4_readpage(page) to
trace_ext4_read_folio(folio). Do the same for
trace_ext4_releasepage(page) to trace_ext4_release_folio(folio)
As a minor bit of optimization to avoid an extra dereferencing,
since both of the above functions already were dereferencing
folio->mapping->host, hence change the tracepoint argument to take
(inode, folio).
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/caba2b3c0147bed4ea7706767dc1d19cd0e29ab0.1684122756.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 3f079114bf ("ext4: Convert data=journal writeback to use ext4_writepages()")
Added support for writeback of journalled data into ext4_writepages()
and killed function __ext4_journalled_writepage() which used to call
ext4_journalled_write_inline_data() for inline data.
This function got left over by mistake. Hence kill it's definition as
no one uses it.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/122b2a8d5e0650686f23ed6da26ed9e04105562b.1684122756.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A recent patch added a call to ext4_error() which is problematic since
some callers of the ext4_get_group_info() function may be holding a
spinlock, whereas ext4_error() must never be called in atomic context.
This triggered a report from Syzbot: "BUG: sleeping function called from
invalid context in ext4_update_super" (see the link below).
Therefore, drop the call to ext4_error() from ext4_get_group_info(). In
the meantime use eight characters tabs instead of nine characters ones.
Reported-by: syzbot+4acc7d910e617b360859@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/00000000000070575805fdc6cdb2@google.com/
Fixes: 5354b2af34 ("ext4: allow ext4_get_group_info() to fail")
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20230614100446.14337-1-fmdefrancesco@gmail.com
This reverts commit ad3f09be6c.
The reverted commit was intended to simpfy the code to get group
descriptor block number in non-meta block group by assuming
s_gdb_count is block number used for all non-meta block group descriptors.
However s_gdb_count is block number used for all meta *and* non-meta
group descriptors. So s_gdb_group will be > actual group descriptor block
number used for all non-meta block group which should be "total non-meta
block group" / "group descriptors per block", e.g. s_first_meta_bg.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230613225025.3859522-1-shikemeng@huaweicloud.com
Fixes: ad3f09be6c ("ext4: remove unnecessary check in ext4_bg_num_gdb_nometa")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current interface for exclusive opens is rather confusing as it
requires both the FMODE_EXCL flag and a holder. Remove the need to pass
FMODE_EXCL and just key off the exclusive open off a non-NULL holder.
For blkdev_put this requires adding the holder argument, which provides
better debug checking that only the holder actually releases the hold,
but at the same time allows removing the now superfluous mode argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers of generic_perform_write need to updated ki_pos, move it into
common code.
Link: https://lkml.kernel.org/r/20230601145904.1385409-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "cleanup the filemap / direct I/O interaction", v4.
This series cleans up some of the generic write helper calling conventions
and the page cache writeback / invalidation for direct I/O. This is a
spinoff from the no-bufferhead kernel project, for which we'll want to an
use iomap based buffered write path in the block layer.
This patch (of 12):
The last user of current->backing_dev_info disappeared in commit
b9b1335e64 ("remove bdi_congested() and wb_congested() and related
functions"). Remove the field and all assignments to it.
Link: https://lkml.kernel.org/r/20230601145904.1385409-1-hch@lst.de
Link: https://lkml.kernel.org/r/20230601145904.1385409-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ext4_xattr_block_set() relies on its caller to call dquot_initialize()
on the inode. To assure that this has happened there are WARN_ON
checks. Unfortunately, this is subject to false positives if there is
an antagonist thread which is flipping the file system at high rates
between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is
enabled.
Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Implement a set of holder_ops that shut down the file system when the
block device used as log device is removed undeneath the file system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wire up the shutdown method to shut down the file system when the
underlying block device is marked dead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split ext4_shutdown into a low-level helper that will be reused for
implementing the shutdown super operation and a wrapper for the ioctl
handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and
installed in the block_device for exclusive claims. It will be used to
allow the block layer to call back into the user of the block device for
thing like notification of a removed device or a device resize.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 32c0869370.
The reverted commit was intended to remove a dead check however it was observed
that this check was actually being used to exit early instead of looping
sbi->s_mb_max_to_scan times when we are able to find a free extent bigger than
the goal extent. Due to this, a my performance tests (fsmark, parallel file
writes in a highly fragmented FS) were seeing a 2x-3x regression.
Example, the default value of the following variables is:
sbi->s_mb_max_to_scan = 200
sbi->s_mb_min_to_scan = 10
In ext4_mb_check_limits() if we find an extent smaller than goal, then we return
early and try again. This loop will go on until we have processed
sbi->s_mb_max_to_scan(=200) number of free extents at which point we exit and
just use whatever we have even if it is smaller than goal extent.
Now, the regression comes when we find an extent bigger than goal. Earlier, in
this case we would loop only sbi->s_mb_min_to_scan(=10) times and then just use
the bigger extent. However with commit 32c08693 that check was removed and hence
we would loop sbi->s_mb_max_to_scan(=200) times even though we have a big enough
free extent to satisfy the request. The only time we would exit early would be
when the free extent is *exactly* the size of our goal, which is pretty uncommon
occurrence and so we would almost always end up looping 200 times.
Hence, revert the commit by adding the check back to fix the regression. Also
add a comment to outline this policy.
Fixes: 32c0869370 ("ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/ddcae9658e46880dfec2fb0aa61d01fb3353d202.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove locking of moved directory in ext4_rename2(). We will take care
of it in VFS instead. This effectively reverts commit 0813299c58
("ext4: Fix possible corruption when moving a directory") and followup
fixes.
CC: Ted Tso <tytso@mit.edu>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230601105830.13168-1-jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In commit a44be64bbe ("ext4: don't clear SB_RDONLY when remounting
r/w until quota is re-enabled") we defer clearing tyhe SB_RDONLY flag
in struct super. However, we didn't defer when we checked sb_rdonly()
to determine the lazy itable init thread should be enabled, with the
next result that the lazy inode table initialization would not be
properly started. This can cause generic/231 to fail in ext4's
nojournal mode.
Fix this by moving when we decide to start or stop the lazy itable
init thread to after we clear the SB_RDONLY flag when we are
remounting the file system read/write.
Fixes a44be64bbe ("ext4: don't clear SB_RDONLY when remounting r/w until...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230527035729.1001605-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit e360c6ed72 ("ext4: Drop special handling of journalled data
from ext4_sync_file()") simplified ext4_sync_file() by dropping special
handling of journalled data mode as it was not needed anymore. However
that branch was also used for directories and symlinks and since the
fastcommit code does not track metadata changes to non-regular files, the
change has caused e.g. fsync(2) on directories to not commit transaction
as it should. Fix the problem by adding handling for non-regular files.
Fixes: e360c6ed72 ("ext4: Drop special handling of journalled data from ext4_sync_file()")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/all/ZFqO3xVnmhL7zv1x@debian-BULLSEYE-live-builder-AMD64
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230524104453.8734-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 when got converted to iomap for dio, it copied __generic_file_fsync
implementation to avoid taking inode_lock in order to avoid any deadlock
(since iomap takes an inode_lock while calling generic_write_sync()).
The previous patch already added generic_buffers_fsync*() which does not
take any inode_lock(). Hence kill the redundant code and use
generic_buffers_fsync_noflush() function instead.
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <b43d4bb4403061ed86510c9587673e30a461ba14.1682069716.git.ritesh.list@gmail.com>
In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Normally the extended attributes in the inode body would have been
checked when the inode is first opened, but if someone is writing to
the block device while the file system is mounted, it's possible for
the inode table to get corrupted. Add bounds checking to avoid
reading beyond the end of allocated memory if this happens.
Reported-by: syzbot+1966db24521e5f6e23f7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=1966db24521e5f6e23f7
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Whether the file system is mounted read-only or read/write is more
important than the quota mode, which we are already printing. Add the
ro vs r/w indication since this can be helpful in debugging problems
from the console log.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If there are failures while changing the mount options in
__ext4_remount(), we need to restore the old mount options.
This commit fixes two problem. The first is there is a chance that we
will free the old quota file names before a potential failure leading
to a use-after-free. The second problem addressed in this commit is
if there is a failed read/write to read-only transition, if the quota
has already been suspended, we need to renable quota handling.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When a file system currently mounted read/only is remounted
read/write, if we clear the SB_RDONLY flag too early, before the quota
is initialized, and there is another process/thread constantly
attempting to create a directory, it's possible to trigger the
WARN_ON_ONCE(dquot_initialize_needed(inode));
in ext4_xattr_block_set(), with the following stack trace:
WARNING: CPU: 0 PID: 5338 at fs/ext4/xattr.c:2141 ext4_xattr_block_set+0x2ef2/0x3680
RIP: 0010:ext4_xattr_block_set+0x2ef2/0x3680 fs/ext4/xattr.c:2141
Call Trace:
ext4_xattr_set_handle+0xcd4/0x15c0 fs/ext4/xattr.c:2458
ext4_initxattrs+0xa3/0x110 fs/ext4/xattr_security.c:44
security_inode_init_security+0x2df/0x3f0 security/security.c:1147
__ext4_new_inode+0x347e/0x43d0 fs/ext4/ialloc.c:1324
ext4_mkdir+0x425/0xce0 fs/ext4/namei.c:2992
vfs_mkdir+0x29d/0x450 fs/namei.c:4038
do_mkdirat+0x264/0x520 fs/namei.c:4061
__do_sys_mkdirat fs/namei.c:4076 [inline]
__se_sys_mkdirat fs/namei.c:4074 [inline]
__x64_sys_mkdirat+0x89/0xa0 fs/namei.c:4074
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-1-tytso@mit.edu
Reported-by: syzbot+6385d7d3065524c5ca6d@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=6513f6cb5cd6b5fc9f37e3bb70d273b94be9c34c
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 has a filesystem wide lock protecting ext4_writepages() calls to
avoid races with switching of journalled data flag or inode format. This
lock can however cause a deadlock like:
CPU0 CPU1
ext4_writepages()
percpu_down_read(sbi->s_writepages_rwsem);
ext4_change_inode_journal_flag()
percpu_down_write(sbi->s_writepages_rwsem);
- blocks, all readers block from now on
ext4_do_writepages()
ext4_init_io_end()
kmem_cache_zalloc(io_end_cachep, GFP_KERNEL)
fs_reclaim frees dentry...
dentry_unlink_inode()
iput() - last ref =>
iput_final() - inode dirty =>
write_inode_now()...
ext4_writepages() tries to acquire sbi->s_writepages_rwsem
and blocks forever
Make sure we cannot recurse into filesystem reclaim from writeback code
to avoid the deadlock.
Reported-by: syzbot+6898da502aef574c5f8a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/0000000000004c66b405fa108e27@google.com
Fixes: c8585c6fca ("ext4: fix races between changing inode journal mode and ext4_writepages")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230504124723.20205-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, ext4_get_group_info() would treat an invalid group number
as BUG(), since in theory it should never happen. However, if a
malicious attaker (or fuzzer) modifies the superblock via the block
device while it is the file system is mounted, it is possible for
s_first_data_block to get set to a very large number. In that case,
when calculating the block group of some block number (such as the
starting block of a preallocation region), could result in an
underflow and very large block group number. Then the BUG_ON check in
ext4_get_group_info() would fire, resutling in a denial of service
attack that can be triggered by root or someone with write access to
the block device.
For a quality of implementation perspective, it's best that even if
the system administrator does something that they shouldn't, that it
will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info()
will call ext4_error and return NULL. We also add fallback code in
all of the callers of ext4_get_group_info() that it might NULL.
Also, since ext4_get_group_info() was already borderline to be an
inline function, un-inline it. The results in a next reduction of the
compiled text size of ext4 by roughly 2k.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230430154311.579720-2-tytso@mit.edu
Reported-by: syzbot+e2efa3efc15a1c9e95c3@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=69b28112e098b070f639efb356393af3ffec4220
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
When we enable MMP in ext4_multi_mount_protect() during mount or
remount, we end up calling sb_start_write() from write_mmp_block(). This
triggers lockdep warning because freeze protection ranks above s_umount
semaphore we are holding during mount / remount. The problem is harmless
because we are guaranteed the filesystem is not frozen during mount /
remount but still let's fix the warning by not grabbing freeze
protection from ext4_multi_mount_protect().
Cc: stable@kernel.org
Reported-by: syzbot+6b7df7d5506b32467149@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=ab7e5b6f400b7778d46f01841422e5718fb81843
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230411121019.21940-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmROracACgkQ8vlZVpUN
gaPqLQf/ZvzvspL4o3SNsHE/M2tKNBVY/z/vsfmAZwMgrGoK5qCkDsNA7c7+oUwE
xjiHiVHOaYjJVWwkdODAwe7xNbWB6FoKptBaBi89fAyibMY/N7BZ8rad69NQTvyc
JbKjorvEBc+qgsUEt2+ZpMogN9KHlVh3NJwlovesmucQtg2gWLKs8wrxW2bC7uAh
2uR9GWUnhDrs6jHbjHkG3/lgB0aS0StLRxfsbchjZvCsniTDZymLmmgkA1ln17ce
6iRg2ESjYUryPX09YFtUuQVvObtUTM+z8DzwyQuAJ4VfmdoPA4L6mpdqzPGFuKQc
gJrLSB8VZJDvPoGjaHZ+Qdl1tHlFRw==
=2SEf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Some ext4 regression and bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: clean up error handling in __ext4_fill_super()
ext4: reflect error codes from ext4_multi_mount_protect() to its callers
ext4: fix lost error code reporting in __ext4_fill_super()
ext4: fix unused iterator variable warnings
ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
ext4: fix i_disksize exceeding i_size problem in paritally written case
There were two ways to return an error code; one was via setting the
'err' variable, and the second, if err was zero, was via the 'ret'
variable. This was both confusing and fragile, and when code was
factored out of __ext4_fill_super(), some of the error codes returned
by the original code was replaced by -EINVAL, and in one case, the
error code was placed by 0, triggering a kernel null pointer
dereference.
Clean this up by removing the 'ret' variable, leaving only one way to
set the error code to be returned, and restore the errno codes that
were returned via the the mount system call as they were before we
started refactoring __ext4_fill_super().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
This will allow more fine-grained errno codes to be returned by the
mount system call.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When code was factored out of __ext4_fill_super() into
ext4_percpu_param_init() the error return was discarded. This meant
that it was possible for __ext4_fill_super() to return zero,
indicating success, without the struct super getting completely filled
in, leading to a potential NULL pointer dereference.
Reported-by: syzbot+bbf0f9a213c94f283a5c@syzkaller.appspotmail.com
Fixes: 1f79467c8a ("ext4: factor out ext4_percpu_param_init() ...")
Link: https://syzkaller.appspot.com/bug?id=6dac47d5e58af770c0055f680369586ec32e144c
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
When CONFIG_QUOTA is disabled, there are warnings around unused iterator
variables:
fs/ext4/super.c: In function 'ext4_put_super':
fs/ext4/super.c:1262:13: error: unused variable 'i' [-Werror=unused-variable]
1262 | int i, err;
| ^
fs/ext4/super.c: In function '__ext4_fill_super':
fs/ext4/super.c:5200:22: error: unused variable 'i' [-Werror=unused-variable]
5200 | unsigned int i;
| ^
cc1: all warnings being treated as errors
The kernel has updated to GNU11, allowing the variables to be declared
within the for loop. Do so to clear up the warnings.
Fixes: dcbf87589d ("ext4: factor out ext4_flex_groups_free()")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230420-ext4-unused-variables-super-c-v1-1-138b6db6c21c@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Syzbot found the following issue:
loop0: detected capacity change from 0 to 2048
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
==================================================================
BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:306
print_report+0x107/0x1f0 mm/kasan/report.c:417
kasan_report+0xcd/0x100 mm/kasan/report.c:517
ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
ext4_file_write_iter+0x1d0/0x18f0
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4b7a9737b9
RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Above issue is happens when enable bigalloc and inline data feature. As
commit 131294c35e fixed delayed allocation bug in ext4_clu_mapped for
bigalloc + inline. But it only resolved issue when has inline data, if
inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
i_data is still store inline data in this scene. Then will trigger UAF
when find extent.
To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
in ext4_clu_mapped().
Fixes: 131294c35e ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline")
Reported-by: syzbot+bf4bb7731ef73b83a3b4@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Tested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20230406111627.1916759-1-tudor.ambarus@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It is possible for i_disksize can exceed i_size, triggering a warning.
generic_perform_write
copied = iov_iter_copy_from_user_atomic(len) // copied < len
ext4_da_write_end
| ext4_update_i_disksize
| new_i_size = pos + copied;
| WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize
| generic_write_end
| copied = block_write_end(copied, len) // copied = 0
| if (unlikely(copied < len))
| if (!PageUptodate(page))
| copied = 0;
| if (pos + copied > inode->i_size) // return false
if (unlikely(copied == 0))
goto again;
if (unlikely(iov_iter_fault_in_readable(i, bytes))) {
status = -EFAULT;
break;
}
We get i_disksize greater than i_size here, which could trigger WARNING
check 'i_size_read(inode) < EXT4_I(inode)->i_disksize' while doing dio:
ext4_dio_write_iter
iomap_dio_rw
__iomap_dio_rw // return err, length is not aligned to 512
ext4_handle_inode_extension
WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize) // Oops
WARNING: CPU: 2 PID: 2609 at fs/ext4/file.c:319
CPU: 2 PID: 2609 Comm: aa Not tainted 6.3.0-rc2
RIP: 0010:ext4_file_write_iter+0xbc7
Call Trace:
vfs_write+0x3b1
ksys_write+0x77
do_syscall_64+0x39
Fix it by updating 'copied' value before updating i_disksize just like
ext4_write_inline_data_end() does.
A reproducer can be found in the buganizer link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217209
Fixes: 64769240bd ("ext4: Add delayed allocation support in data=writeback mode")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230321013721.89818-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
-----BEGIN PGP SIGNATURE-----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=Erfk
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Cleanup of the io-wq per-node mapping, notably getting rid of it so
we just have a single io_wq entry per ring (Breno)
- Followup to the above, move accounting to io_wq as well and
completely drop struct io_wqe (Gabriel)
- Enable KASAN for the internal io_uring caches (Breno)
- Add support for multishot timeouts. Some applications use timeouts to
wake someone waiting on completion entries, and this makes it a bit
easier to just have a recurring timer rather than needing to rearm it
every time (David)
- Support archs that have shared cache coloring between userspace and
the kernel, and hence have strict address requirements for mmap'ing
the ring into userspace. This should only be parisc/hppa. (Helge, me)
- XFS has supported O_DIRECT writes without needing to lock the inode
exclusively for a long time, and ext4 now supports it as well. This
is true for the common cases of not extending the file size. Flag the
fs as having that feature, and utilize that to avoid serializing
those writes in io_uring (me)
- Enable completion batching for uring commands (me)
- Revert patch adding io_uring restriction to what can be GUP mapped or
not. This does not belong in io_uring, as io_uring isn't really
special in this regard. Since this is also getting in the way of
cleanups and improvements to the GUP code, get rid of if (me)
- A few series greatly reducing the complexity of registered resources,
like buffers or files. Not only does this clean up the code a lot,
the simplified code is also a LOT more efficient (Pavel)
- Series optimizing how we wait for events and run task_work related to
it (Pavel)
- Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel)
- Misc cleanups and improvements (Pavel, me)
* tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits)
Revert "io_uring/rsrc: disallow multi-source reg buffers"
io_uring: add support for multishot timeouts
io_uring/rsrc: disassociate nodes and rsrc_data
io_uring/rsrc: devirtualise rsrc put callbacks
io_uring/rsrc: pass node to io_rsrc_put_work()
io_uring/rsrc: inline io_rsrc_put_work()
io_uring/rsrc: add empty flag in rsrc_node
io_uring/rsrc: merge nodes and io_rsrc_put
io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal
io_uring/rsrc: remove unused io_rsrc_node::llist
io_uring/rsrc: refactor io_queue_rsrc_removal
io_uring/rsrc: simplify single file node switching
io_uring/rsrc: clean up __io_sqe_buffers_update()
io_uring/rsrc: inline switch_start fast path
io_uring/rsrc: remove rsrc_data refs
io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce
io_uring/rsrc: use wq for quiescing
io_uring/rsrc: refactor io_rsrc_ref_quiesce
io_uring/rsrc: remove io_rsrc_node::done
io_uring/rsrc: use nospec'ed indexes
...
* The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special cases
by Jan Kara.
* Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
* Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
* Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
* Jason Yan has continued to factor out ext4_fill_super() into smaller
functions for improve ease of maintenance and comprehension.
* Josh Triplett has created an uapi header for ext4 userspace API's.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmRHS3IACgkQ8vlZVpUN
gaNN7AgAnFiWfk4UqKpBsUL5iQKJgf2K4tjlNXgPd6ghNns0IdFEyeWSHhr6KLv/
SQeoMMyiWaUcTvZs9DokD8U/9M1ELPUiE9W5c9GxJjM86SXp8BlLYSZTiRoNHzGJ
noQpvikj4qTRviK0rA3q5ICTP2eh1ECHMFJy2wcsZQgwnBelUejQHsTGtOwSvFWF
8wMdfuVtAFDZJjzOxzVKfHP22R5HVRWlAU7P1d97qKjBj4Se3+QchI+zdcIrmU9A
tTmCXj57NpTDyLjS9dIDmLygtTv93lOzOmZS8glw0BFonPcd3ObI4RHVxR+V9xu1
lN13YYgBrK6yfApn9L5XL/31PuLfbg==
=VLBx
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"There are a number of major cleanups in ext4 this cycle:
- The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special
cases by Jan Kara.
- Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
- Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
- Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
- Jason Yan has continued to factor out ext4_fill_super() into
smaller functions for improve ease of maintenance and
comprehension.
- Josh Triplett has created an uapi header for ext4 userspace API's"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (105 commits)
ext4: Add a uapi header for ext4 userspace APIs
ext4: remove useless conditional branch code
ext4: remove unneeded check of nr_to_submit
ext4: move dax and encrypt checking into ext4_check_feature_compatibility()
ext4: factor out ext4_block_group_meta_init()
ext4: move s_reserved_gdt_blocks and addressable checking into ext4_check_geometry()
ext4: rename two functions with 'check'
ext4: factor out ext4_flex_groups_free()
ext4: use ext4_group_desc_free() in ext4_put_super() to save some duplicated code
ext4: factor out ext4_percpu_param_init() and ext4_percpu_param_destroy()
ext4: factor out ext4_hash_info_init()
Revert "ext4: Fix warnings when freezing filesystem with journaled data"
ext4: Update comment in mpage_prepare_extent_to_map()
ext4: Simplify handling of journalled data in ext4_bmap()
ext4: Drop special handling of journalled data from ext4_quota_on()
ext4: Drop special handling of journalled data from ext4_evict_inode()
ext4: Fix special handling of journalled data from extent zeroing
ext4: Drop special handling of journalled data from extent shifting operations
ext4: Drop special handling of journalled data from ext4_sync_file()
ext4: Commit transaction before writing back pages in data=journal mode
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEhwgAKCRCRxhvAZXjc
otwgAQDXHnKiPm/d76lITXbxdUNCtvZz+ig26EbOrD+vEszzIQEA81dru0QbCNCt
ctoZdcsmtKbt2VaYQF1CDOhlnNg5VQM=
=pER1
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull acl updates from Christian Brauner:
"After finishing the introduction of the new posix acl api last cycle
the generic POSIX ACL xattr handlers are still around in the
filesystems xattr handlers for two reasons:
(1) Because a few filesystems rely on the ->list() method of the
generic POSIX ACL xattr handlers in their ->listxattr() inode
operation.
(2) POSIX ACLs are only available if IOP_XATTR is raised. The
IOP_XATTR flag is raised in inode_init_always() based on whether
the sb->s_xattr pointer is non-NULL. IOW, the registered xattr
handlers of the filesystem are used to raise IOP_XATTR. Removing
the generic POSIX ACL xattr handlers from all filesystems would
risk regressing filesystems that only implement POSIX ACL support
and no other xattrs (nfs3 comes to mind).
This contains the work to decouple POSIX ACLs from the IOP_XATTR flag
as they don't depend on xattr handlers anymore. So it's now possible
to remove the generic POSIX ACL xattr handlers from the sb->s_xattr
list of all filesystems. This is a crucial step as the generic POSIX
ACL xattr handlers aren't used for POSIX ACLs anymore and POSIX ACLs
don't depend on the xattr infrastructure anymore.
Adressing problem (1) will require more long-term work. It would be
best to get rid of the ->list() method of xattr handlers completely at
some point.
For erofs, ext{2,4}, f2fs, jffs2, ocfs2, and reiserfs the nop POSIX
ACL xattr handler is kept around so they can continue to use
array-based xattr handler indexing.
This update does simplify the ->listxattr() implementation of all
these filesystems however"
* tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
acl: don't depend on IOP_XATTR
ovl: check for ->listxattr() support
reiserfs: rework priv inode handling
fs: rename generic posix acl handlers
reiserfs: rework ->listxattr() implementation
fs: simplify ->listxattr() implementation
fs: drop unused posix acl handlers
xattr: remove unused argument
xattr: add listxattr helper
xattr: simplify listxattr helpers
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----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=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
It's ok because the code will be optimized by the compiler, just
try to simple the code.
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230401075303.45206-1-wuchi.zero@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
cppcheck reports
fs/ext4/page-io.c:516:51: style:
Condition 'nr_to_submit' is always true [knownConditionTrueFalse]
if (fscrypt_inode_uses_fs_layer_crypto(inode) && nr_to_submit) {
^
This earlier check to bail, makes this check unncessary
/* Nothing to submit? Just unlock the page... */
if (!nr_to_submit)
return 0;
Signed-off-by: Tom Rix <trix@redhat.com>
Fixes: dff4ac75ee ("ext4: move keep_towrite handling to ext4_bio_write_page()")
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230316204831.2472537-1-trix@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
These checkings are also related with feature compatibility checkings.
So move them into ext4_check_feature_compatibility(). No functional
change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-9-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The naming styles are different for some functions with 'check' in their
names. Some of them are like:
ext4_check_quota_consistency
ext4_check_test_dummy_encryption
ext4_check_opt_consistency
ext4_check_descriptors
ext4_check_feature_compatibility
While the others looks like below:
ext4_geometry_check
ext4_journal_data_mode_check
This is not a big deal and boils down to personal preference. But I'd
like to make them consistent.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-6-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The only difference here is that ->s_group_desc and ->s_flex_groups share
the same rcu read lock here but it is not necessary. In other places they
do not share the lock at all.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-4-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_percpu_param_init() and ext4_percpu_param_destroy(). And
also use ext4_percpu_param_destroy() in ext4_put_super() to avoid
duplicated code. No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-3-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After making ext4_writepages() properly clean all pages there is no need
for special treatment of filesystem freezing. Revert commit
e6c28a26b7.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-13-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since filemap_write_and_wait() is now enough to get journalled data to
final location update the comment in mpage_prepare_extent_to_map().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-12-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that ext4_writepages() gets journalled data into its final location
we just use filemap_write_and_wait() instead of special handling of
journalled data in ext4_bmap(). We can also drop EXT4_STATE_JDATA flag
as it is not used anymore.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-11-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that ext4_writepages() makes sure all journalled data is committed
and checkpointed, sync_filesystem() call done by dquot_quota_on() is
enough for quota IO to see uptodate data. So drop special handling of
journalled data from ext4_quota_on().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that ext4_writepages() makes sure journalled data is on stable
storage, write_inode_now() call in iput_final() is enough to make
pagecache pages with journalled data really clean (data committed and
checkpointed). So we can drop special handling of journalled data in
ext4_evict_inode().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The handling of journalled data in ext4_zero_range() is incomplete. We
do not need to commit running transaction but we rather need to
checkpoint pages with journalled data. If we don't, journal tail can be
advanced beyond transaction containing the journalled data and if we
then crash before committing the transaction doing the zeroing we will
have inconsistent (too old) data in the file. Make sure file pages with
journalled data are properly checkpointed before removing them from the
page cache.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that filemap_write_and_wait() makes sure pages with journalled data
are safely on disk, ext4_collapse_range() and ext4_insert_range() do
not need special handling of journalled data.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that ext4_writepages() make sure all pages with journalled data are
stable on disk, we don't need special handling of journalled data in
ext4_sync_file().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When journalling data we currently just walk over pages, journal those
that are marked for delayed dirtying (only pinned pages dirtied behing
our back these days) and checkpoint other dirty pages. Because some
pages may be part of running transaction the result is that after
filemap_write_and_wait() we are not guaranteed pages are stable on disk.
Thus places that want to flush current pagecache content need to jump
through hoops to make sure journalled data is not lost. This is
manageable in cases completely controlled by ext4 (such as extent
shifting operations or inode eviction) but it gets ugly for stuff like
fsverity. Furthermore it is rather error prone as people often do not
realize journalled data needs special handling.
So change ext4_writepages() to commit transaction with inode's data
before going through the writeback loop in WB_SYNC_ALL mode. As a result
filemap_write_and_wait() is now really getting pages to stable storage
and makes pagecache pages safe to reclaim. Consequently we can remove
the special handling of journalled data from several places in follow up
patches.
Note that this will make fsync(2) for journalled data more expensive as
we will end up not only committing the transaction we need but also
checkpointing the data (which we may have previously skipped if the data
was part of the running transaction). If we really cared, we would need
to introduce special VFS function for writing out & invalidating page
cache for a range, use ->launder_page callback to perform checkpointing,
and use it from all the places that need this functionality. But at this
point I'm not convinced the complexity is worth it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With journalled data it can happen that checkpointing code will write
out page contents without clearing the page dirty bit. The logic in
ext4_page_nomap_can_writeout() then results in us never calling
mpage_submit_page() and thus clearing the dirty bit. Drop the
optimization with ext4_page_nomap_can_writeout() and just always call to
mpage_submit_page(). ext4_bio_write_page() knows when to redirty the
page and the additional clearing & setting of page dirty bit for ordered
mode writeout is not that expensive to jump through the hoops for it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we clear page dirty bit when we checkpoint some buffers from a
page with journalled data or when we perform delayed dirtying of a page
in ext4_writepages(). In a quest to simplify handling of journalled data
we want to keep page dirty as long as it has either buffers to
checkpoint or journalled dirty data. So make sure to keep page dirty in
ext4_writepages() if it still has journalled data attached to it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently pages with journalled data written by write(2) or modified by
block zeroing during truncate(2) are not marked as dirty. They are
dirtied only once the transaction commits. This however makes writeback
code think inode has no pages to write and so ext4_writepages() is not
called to make pages with journalled data persistent. Mark pages with
journalled data dirty (similarly as it happens for writes through mmap)
so that writeback code knows about them and ext4_writepages() can do
what it needs to to the inode.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is an implementation of fsverity_operations read_merkle_tree_page,
so it must still return the precise page asked for, but we can use the
folio API to reduce the number of conversions between folios & pages.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230324180129.1220691-30-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use a folio throughout. Does not support large folios due to
an array sized for MAX_BUF_PER_PAGE, but it does remove a few
calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230324180129.1220691-28-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
All the callers now have a folio, so pass that in and operate on folios.
Removes four calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230324180129.1220691-25-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This definitely doesn't include support for large folios; there
are all kinds of assumptions about the number of buffers attached
to a folio. But it does remove several calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230324180129.1220691-24-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert the incoming page to a folio to remove a few calls to
compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-19-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert the incoming struct page to a folio. Replaces two implicit
calls to compound_head() with one explicit call.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-18-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert the incoming page to a folio so that we call compound_head()
only once instead of seven times.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-16-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
All callers now have a folio, so pass it and use it. The folio may
be large, although I doubt we'll want to use a large folio for an
inline file.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-15-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the folio API in this function, saves a few calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-10-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The only caller now has a folio so pass it in directly and avoid the call
to page_folio() at the beginning.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-9-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
All callers now have a folio so we can pass one in and use the folio
APIs to support large folios as well as save instructions by eliminating
a call to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230324180129.1220691-8-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
All callers now have a folio so we can pass one in and use the folio
APIs to support large folios as well as save instructions by eliminating
calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-7-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The page/folio is only used to extract the buffers, so this is a
simple change.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-6-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Prepare ext4 to support large folios in the page writeback path.
Also set the actual error in the mapping, not just -EIO.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-5-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove several calls to compound_head() and the last caller of
set_page_writeback_keepwrite(), so remove the wrapper too.
Also export bio_add_folio() as this is the first caller from a module.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230324180129.1220691-4-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This particular combination of flags is used by most filesystems
in their ->write_begin method, although it does find use in a
few other places. Before folios, it warranted its own function
(grab_cache_page_write_begin()), but I think that just having specialised
flags is enough. It certainly helps the few places that have been
converted from grab_cache_page_write_begin() to __filemap_get_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230324180129.1220691-2-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Earlier, inode PAs were stored in a linked list. This caused a need to
periodically trim the list down inorder to avoid growing it to a very
large size, as this would severly affect performance during list
iteration.
Recent patches changed this list to an rbtree, and since the tree scales
up much better, we no longer need to have the trim functionality, hence
remove it.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/c409addceaa3ade4b40328e28e3b54b2f259689e.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, the kernel uses i_prealloc_list to hold all the inode
preallocations. This is known to cause degradation in performance in
workloads which perform large number of sparse writes on a single file.
This is mainly because functions like ext4_mb_normalize_request() and
ext4_mb_use_preallocated() iterate over this complete list, resulting in
slowdowns when large number of PAs are present.
Patch 27bc446e2 partially fixed this by enforcing a limit of 512 for
the inode preallocation list and adding logic to continually trim the
list if it grows above the threshold, however our testing revealed that
a hardcoded value is not suitable for all kinds of workloads.
To optimize this, add an rbtree to the inode and hold the inode
preallocations in this rbtree. This will make iterating over inode PAs
faster and scale much better than a linked list. Additionally, we also
had to remove the LRU logic that was added during trimming of the list
(in ext4_mb_release_context()) as it will add extra overhead in rbtree.
The discards now happen in the lowest-logical-offset-first order.
** Locking notes **
With the introduction of rbtree to maintain inode PAs, we can't use RCU
to walk the tree for searching since it can result in partial traversals
which might miss some nodes(or entire subtrees) while discards happen
in parallel (which happens under a lock). Hence this patch converts the
ei->i_prealloc_lock spin_lock to rw_lock.
Almost all the codepaths that read/modify the PA rbtrees are protected
by the higher level inode->i_data_sem (except
ext4_mb_discard_group_preallocations() and ext4_clear_inode()) IIUC, the
only place we need lock protection is when one thread is reading
"searching" the PA rbtree (earlier protected under rcu_read_lock()) and
another is "deleting" the PAs in ext4_mb_discard_group_preallocations()
function (which iterates all the PAs using the grp->bb_prealloc_list and
deletes PAs from the tree without taking any inode lock (i_data_sem)).
So, this patch converts all rcu_read_lock/unlock() paths for inode list
PA to use read_lock() and all places where we were using
ei->i_prealloc_lock spinlock will now be using write_lock().
Note that this makes the fast path (searching of the right PA e.g.
ext4_mb_use_preallocated() or ext4_mb_normalize_request()), now use
read_lock() instead of rcu_read_lock/unlock(). Ths also will now block
due to slow discard path (ext4_mb_discard_group_preallocations()) which
uses write_lock().
But this is not as bad as it looks. This is because -
1. The slow path only occurs when the normal allocation failed and we
can say that we are low on disk space. One can argue this scenario
won't be much frequent.
2. ext4_mb_discard_group_preallocations(), locks and unlocks the rwlock
for deleting every individual PA. This gives enough opportunity for
the fast path to acquire the read_lock for searching the PA inode
list.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/4137bce8f6948fedd8bae134dabae24acfe699c6.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
** Splitting pa->pa_inode_list **
Currently, we use the same pa->pa_inode_list to add a pa to either
the inode preallocation list or the locality group preallocation list.
For better clarity, split this list into a union of 2 list_heads and use
either of the them based on the type of pa.
** Splitting pa->pa_obj_lock **
Currently, pa->pa_obj_lock is either assigned &ei->i_prealloc_lock for
inode PAs or lg_prealloc_lock for lg PAs, and is then used to lock the
lists containing these PAs. Make the distinction between the 2 PA types
clear by changing this lock to a union of 2 locks. Explicitly use the
pa_lock_node.inode_lock for inode PAs and pa_lock_node.lg_lock for lg
PAs.
This patch is required so that the locality group preallocation code
remains the same as in upcoming patches we are going to make changes to
inode preallocation code to move from list to rbtree based
implementation. This patch also makes it easier to review the upcoming
patches.
There are no functional changes in this patch.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1d7ac0557e998c3fc7eef422b52e4bc67bdef2b0.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the length of best extent found is less than the length of goal extent
we need to make sure that the best extent atleast covers the start of the
original request. This is done by adjusting the ac_b_ex.fe_logical (logical
start) of the extent.
While doing so, the current logic sometimes results in the best extent's
logical range overflowing the goal extent. Since this best extent is later
added to the inode preallocation list, we have a possibility of introducing
overlapping preallocations. This is discussed in detail here [1].
As per Jan's suggestion, to fix this, replace the existing logic with the
below logic for adjusting best extent as it keeps fragmentation in check
while ensuring logical range of best extent doesn't overflow out of goal
extent:
1. Check if best extent can be kept at end of goal range and still cover
original start.
2. Else, check if best extent can be kept at start of goal range and still
cover original start.
3. Else, keep the best extent at start of original request.
Also, add a few extra BUG_ONs that might help catch errors faster.
[1] https://lore.kernel.org/r/Y+OGkVvzPN0RMv0O@li-bb2b2a4c-3307-11b2-a85c-8fa5c3a69313.ibm.com
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f96aca6d415b36d1f90db86c1a8cd7e2e9d7ab0e.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Abstract out the logic of fixing PA overlaps in ext4_mb_normalize_request
to improve readability of code. This also makes it easier to make changes
to the overlap logic in future.
There are no functional changes in this patch
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9b35f3955a1d7b66bbd713eca1e63026e01f78c1.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Abstract out the logic to double check for overlaps in normalize_pa to
a separate function. Since there has been no reports in past where we
have seen any overlaps which hits this bug_on(), in future we can
consider calling this function under "#ifdef AGGRESSIVE_CHECK" only.
There are no functional changes in this patch
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/35dd5d94fa0b2d1cd2d2947adf8967279c72967d.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change some variable names to be more consistent and
refactor some of the code to make it easier to read.
There are no functional changes in this patch
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/8edcab489c06cf861b19d87207d9b0ff7ac7f3c1.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch makes the following changes:
* Rename ext4_mb_pa_free to ext4_mb_pa_put_free
to better reflect its purpose
* Add new ext4_mb_pa_free() which only handles freeing
* Refactor ext4_mb_pa_callback() to use ext4_mb_pa_free()
There are no functional changes in this patch
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/b273bc9cbf5bd278f641fa5bc6c0cc9e6cb3330c.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we come across a PA that matches the logical offset but is unable to
satisfy a non-extent file due to its physical start being higher than
that supported by non extent files, then simply stop searching for
another PA and break out of loop. This is because, since PAs don't
overlap, we won't be able to find another inode PA which can satisfy the
original request.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/42404ca29bd304ae2c962184c3c32a02e8eefcd0.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Result of EXT4_SB(ac->ac_sb) is already stored in sbi at beginning of
ext4_mb_normalize_request. Use sbi instead of EXT4_SB(ac->ac_sb) to
remove unnecessary pointer dereference.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230311170949.1047958-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We try to allocate a block from goal in ext4_mb_new_blocks_simple. We
only need get blkoff in first group with goal and set blkoff to 0 for
the rest groups.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-21-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Call trace to assign ac_f_ex:
ext4_mb_use_best_found
ac->ac_f_ex = ac->ac_b_ex;
ext4_mb_new_preallocation
ext4_mb_new_group_pa
ac->ac_f_ex = ac->ac_b_ex;
ext4_mb_new_inode_pa
ac->ac_f_ex = ac->ac_b_ex;
Actually allocated blocks is already stored in ac_f_ex in
ext4_mb_use_best_found, so there is no need to assign ac_f_ex
in ext4_mb_new_group_pa and ext4_mb_new_inode_pa.
Just remove repeat assignment to ac_f_ex in ext4_mb_new_group_pa
and ext4_mb_new_inode_pa.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-19-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_read_block_bitmap fails, we can return PTR_ERR(bitmap_bh) to
remove unnecessary NULL check of bitmap_bh.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-18-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We goto exit_meta_group_info only to return -ENOMEM. Return -ENOMEM
directly instead of goto to remove this unnecessary tag.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-16-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If any bex which meets bex->fe_len >= gex->fe_len is found, then it will
always be used when complex scan of group that bex belongs to finishs.
So there will not be any lock-unlock period.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-15-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Only call trace of ext4_mb_check_limits is as following:
ext4_mb_complex_scan_group
ext4_mb_measure_extent
ext4_mb_check_limits(ac, e4b, 0);
ext4_mb_check_limits(ac, e4b, 1);
If the first ac->ac_found > sbi->s_mb_max_to_scan check in
ext4_mb_check_limits is met, we will set ac_status to
AC_STATUS_BREAK and call ext4_mb_try_best_found to try to use
ac->ac_b_ex.
If ext4_mb_try_best_found successes, then block allocation finishs,
the removed ac->ac_found > sbi->s_mb_min_to_scan check is not reachable.
If ext4_mb_try_best_found fails, then we set EXT4_MB_HINT_FIRST and
reset ac->ac_b_ex to retry block allocation. We will use any found
free extent in ext4_mb_measure_extent before reach the removed
ac->ac_found > sbi->s_mb_min_to_scan check.
In summary, the removed ac->ac_found > sbi->s_mb_min_to_scan check is
not reachable and we can remove that dead check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-14-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We always adjust first to even number and adjust last to odd number, so
first == last will never happen. Remove this dead check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-13-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
1. remove unnecessary ac check:
We always go to out tag before ac is successfully allocated, then we can
move out tag after free of ac and remove NULL check of ac.
2. remove unnecessary *errp check:
We always go to errout tag if *errp is non-zero, then we can move errout
tag into error handle if *errp is non-zero.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-12-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
e4b->bd_buddy_page is only set if we initialize ext4_buddy successfully. So
e4b->bd_buddy_page is always NULL in error handle branch. Just remove the
dead check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-11-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we alloc array of buffer_head failed, there is no resource need to be
freed and we can simpily return error.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return value static function ext4_mb_try_best_found and
ext4_mb_free_metadata is not used. Just remove unused return value.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext4_mb_mark_diskspace_used fails in ext4_mb_new_blocks, we may
discard pa already in list. Protect pa with pa_lock to avoid race.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As we don't correct pa_lstart here, so there is no need to subtract
pa_lstart with consumed len.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We will add pa_free to s_mb_preallocated when new ext4_prealloc_space is
created. In ext4_mb_new_inode_pa, we will call ext4_mb_use_inode_pa
before adding pa_free to s_mb_preallocated. However, ext4_mb_use_inode_pa
will consume pa_free for block allocation which triggerred the creation
of ext4_prealloc_space. Add pa_free to s_mb_preallocated before
ext4_mb_use_inode_pa to correct calculation of s_mb_preallocated.
There is no such problem in ext4_mb_new_group_pa as pa_free of group pa
is consumed in ext4_mb_release_context instead of ext4_mb_use_group_pa.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We always get ext4_group_desc with group + 1 and ext4_group_info with
group to check if we need do initialize ext4_group_info for the group.
Just get ext4_group_desc with group for ext4_group_info initialization
check.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If EXT4_MB_HINT_GOAL_ONLY is set, ext4_mb_regular_allocator will only
allocate blocks from ext4_mb_find_by_goal. Allow to find by goal in
ext4_mb_find_by_goal if EXT4_MB_HINT_GOAL_ONLY is set or allocation
with EXT4_MB_HINT_GOAL_ONLY set will always fail.
EXT4_MB_HINT_GOAL_ONLY is not used at all, so the problem is not
found for now.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We need to set ac_g_ex to notify the goal start used in
ext4_mb_find_by_goal. Set ac_g_ex instead of ac_f_ex in
ext4_mb_normalize_request.
Besides we should assure goal start is in range [first_data_block,
blocks_count) as ext4_mb_initialize_context does.
[ Added a check to make sure size is less than ar->pright; otherwise
we could end up passing an underflowed value of ar->pright - size to
ext4_get_group_no_and_offset(), which will trigger a BUG_ON later on.
- TYT ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of returning NULL for all errors, distinguish between:
- no entry found and not asked to allocated (-ENOENT)
- failed to allocate memory (-ENOMEM)
- would block (-EAGAIN)
so that callers don't have to guess the error based on the passed in
flags.
Also pass through the error through the direct callers: filemap_get_folio,
filemap_lock_folio filemap_grab_folio and filemap_get_incore_folio.
[hch@lst.de: fix null-pointer deref]
Link: https://lkml.kernel.org/r/20230310070023.GA13563@lst.de
Link: https://lkml.kernel.org/r/20230310043137.GA1624890@u2004
Link: https://lkml.kernel.org/r/20230307143410.28031-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nilfs2]
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kfree_rcu() and kvfree_rcu() macros' single-argument forms are
deprecated. Therefore switch to the new kfree_rcu_mightsleep() and
kvfree_rcu_mightsleep() variants. The goal is to avoid accidental use
of the single-argument forms, which can introduce functionality bugs in
atomic contexts and latency bugs in non-atomic contexts.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Lukas Czerner <lczerner@redhat.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Some filesystems support multiple threads writing to the same file with
O_DIRECT without requiring exclusive access to it. io_uring can use this
hint to avoid serializing dio writes to this inode, instead allowing them
to run in parallel.
XFS and ext4 both fall into this category, so set the flag for both of
them.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove unused group parameter in ext4_block_bitmap_csum_set. After this,
group parameter in ext4_set_bitmap_checksums is also not used, just
remove it too.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230221203027.2359920-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As inode table blocks are contiguous, inode table blocks inside the
block_group can be represented as range [itbl_cluster_start,
itbl_cluster_last]. Then we can simply account inode table cluters and
check cluster overlap with [itbl_cluster_start, itbl_cluster_last]
instead of traverse each block of inode table.
By the way, this patch fixes code style problem of comment for
ext4_num_overhead_clusters.
[ Merged fix-up patch which fixed potentially access to an
uninitialzied stack variable. --TYT ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-8-shikemeng@huaweicloud.com
Link: https://lore.kernel.org/r/202303171446.eLEhZzAu-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For case we initialize a bitmap bh, we will set bitmap bh verified.
We can return immediately instead of goto verify to remove unnecessary
work for trying to verify bitmap bh.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit bdfb6ff4a2 ("ext4: mark group corrupt on group descriptor
checksum") added flag to indicate corruption of group instead of
marking all blocks used. Just remove stale comment.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We only call ext4_bg_num_gdb_nometa if there is no meta_bg feature or group
does not reach first_meta_bg, so group must not reside in meta group. Then
group has a global gdt if superblock exists. Just remove confusing branch
that meta_bg feature exists.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_num_base_meta_clusters is already aware of meta_bg feature and test
if block_group is inside real meta block groups before calling
ext4_bg_num_gdb. Then ext4_bg_num_gdb will check if block group is inside
a real meta block groups again to decide either ext4_bg_num_gdb_meta or
ext4_bg_num_gdb_nometa is needed.
Call ext4_bg_num_gdb_meta or ext4_bg_num_gdb_nometa directly after we
check if block_group is inside a meta block groups in
ext4_num_base_meta_clusters to remove redundant check of meta block
groups in ext4_bg_num_gdb.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
1.Last valid cluster of inode table is EXT4_B2C(sbi, offset +
sbi->s_itb_per_group - 1). We should make sure last valid cluster is <
max_bit, i.e., EXT4_B2C(sbi, offset + sbi->s_itb_per_group - 1) is <
max_bit rather than EXT4_B2C(sbi, offset + sbi->s_itb_per_group) is
< max_bit.
2.Bit search length should be last valid cluster plus 1, i.e.,
EXT4_B2C(sbi, offset + sbi->s_itb_per_group - 1) + 1 rather than
EXT4_B2C(sbi, offset + sbi->s_itb_per_group).
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We mark buffer_head of bitmap successfully initialized even error occurs
in ext4_init_block_bitmap. Although we will return error, we will get a
invalid buffer_head of bitmap from next ext4_read_block_bitmap_nowait
which is marked buffer_verified but not successfully initialized actually
in previous ext4_read_block_bitmap_nowait.
Fix this by only marking buffer_head successfully initialized if
ext4_init_block_bitmap successes.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Test generic/390 in data=journal mode often triggers a warning that
ext4_do_writepages() tries to start a transaction on frozen filesystem.
This happens because although all dirty data is properly written, jbd2
checkpointing code writes data through submit_bh() and as a result only
buffer dirty bits are cleared but page dirty bits stay set. Later when
the filesystem is frozen, writeback code comes, tries to write
supposedly dirty pages and the warning triggers. Fix the problem by
calling sync_filesystem() once more after flushing the whole journal to
clear stray page dirty bits.
[ Applied fixup patches to address crashes when running data=journal
tests; see links for more details -- TYT ]
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230308142528.12384-1-jack@suse.cz
Reported-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/20230319183617.GA896@sol.localdomain
Link: https://lore.kernel.org/r/20230323145404.21381-1-jack@suse.cz
Link: https://lore.kernel.org/r/20230323145404.21381-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add support for writeback of journalled data directly into
ext4_writepages() instead of offloading it to write_cache_pages(). This
actually significantly simplifies the code and reduces code duplication.
For checkpointing of committed data we can use ext4_writepages()
rightaway the same way as writeback of ordered data uses it on
transaction commit. For journalling of dirty mapped pages, we need to
add a special case to mpage_prepare_extent_to_map() to add all page
buffers to the journal.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-8-tytso@mit.edu
In case mpage_submit_page() returns error, it doesn't really matter
whether we call mpage_page_done() and then return error or whether we
return directly because in that case page cleanup will be done by
mpage_release_unused_pages() instead. Logically, it makes more sense to
leave the cleanup to mpage_release_unused_pages() because we didn't
succeed in writing the page. So move mpage_page_done() calls after the
error handling.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-7-tytso@mit.edu
Move page unlocking during page writeback out of mpage_submit_page()
into the callers. This will allow writeback in data=journal mode to keep
the page locked for a bit longer. Since page unlocking it tightly
connected to increment of mpd->first_page (as that determines cleanup of
locked but unwritten pages), move page unlocking as well as
mpd->first_page handling into a helper function.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-6-tytso@mit.edu
Do not unlock the written page in ext4_bio_write_page(). Instead leave
the page locked and unlock it in the callers. We'll need to keep the
page locked for data=journal writeback for a bit longer.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-5-tytso@mit.edu
In data=journal mode, page should be dirtied only when it has buffers
for checkpoint or it is writeably mapped. In the first case, we don't
need to do anything special. In the second case, page was already added
to the journal by ext4_page_mkwrite() and since transaction commit
writeprotects mapped pages again, page should be writeable (and thus
dirtied) only while it is part of the running transaction. So nothing
needs to be done either. The only special case is when someone pins the
page and uses this pin for modifying page data. So recognize this
special case and only then mark the page as having data that needs
adding to the journal.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-4-tytso@mit.edu
When looking up extent of pages to map in mpage_prepare_extent_to_map()
we count how many pages we still need to find in a copy of
wbc->nr_to_write counter. With more complex page handling for
data=journal mode, it will be easier to use wbc->nr_to_write directly so
that we don't forget to carry over changes back to nr_to_write counter.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-3-tytso@mit.edu
The comment above do_journal_get_write_access() is very stale. Most of
it just does not refer to what the function does today or how jbd2
works. The bit about transaction handling during write(2) is still
correct so just update the function names in that part and move the
comment to a more appropriate place.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-2-tytso@mit.edu
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmQNVwIACgkQ8vlZVpUN
gaMwmgf/ZAasXZEMV0zaQZa8zP4KvMKZjWe6azkcJg4sb/HG9Q7JzeJDCurhhWUj
8+QnyUcuKTyWKYWjGf0f5CZaYEM5AZYij41UJzu2qMkz5hVXSqBVuY8KywxuiJv5
kfuIvQh0Onv0Yrg2qAc52/kZkq1lu2sl/F5ertBWjdpTUXdBUdrCxkUk+1BgQWAj
vNwi1/+gNuX7RxMboHqYmwXFP39vECd+wteNdsiK1hR8bLqL68duLLq8xQdHt4gS
sbVmJKR4j2Giw4ZnlYi9RiwKIO0beqocanp+cfOPulyj5mTM8X1lr0uvaLZgx2AF
lqrS3/5ksp45cRT70qCIz8je70hTSg==
=nN3T
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80
Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);
Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-3-yebin@huaweicloud.com
Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-2-yebin@huaweicloud.com
The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
64BIT is part of the incompatible feature set, update the comment
accordingly.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230301133842.671821-1-tudor.ambarus@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Apparently syzbot figured out that issuing this FSMAP call:
struct fsmap_head cmd = {
.fmh_count = ...;
.fmh_keys = {
{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
},
...
};
ret = ioctl(fd, FS_IOC_GETFSMAP, &cmd);
Produces this crash if the underlying filesystem is a 1k-block ext4
filesystem:
kernel BUG at fs/ext4/ext4.h:3331!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 3227965 Comm: xfs_io Tainted: G W O 6.2.0-rc8-achx
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:ext4_mb_load_buddy_gfp+0x47c/0x570 [ext4]
RSP: 0018:ffffc90007c03998 EFLAGS: 00010246
RAX: ffff888004978000 RBX: ffffc90007c03a20 RCX: ffff888041618000
RDX: 0000000000000000 RSI: 00000000000005a4 RDI: ffffffffa0c99b11
RBP: ffff888012330000 R08: ffffffffa0c2b7d0 R09: 0000000000000400
R10: ffffc90007c03950 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000ffffffff R14: 0000000000000c40 R15: ffff88802678c398
FS: 00007fdf2020c880(0000) GS:ffff88807e100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd318a5fe8 CR3: 000000007f80f001 CR4: 00000000001706e0
Call Trace:
<TASK>
ext4_mballoc_query_range+0x4b/0x210 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_getfsmap_datadev+0x713/0x890 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_getfsmap+0x2b7/0x330 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_ioc_getfsmap+0x153/0x2b0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
__ext4_ioctl+0x2a7/0x17e0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
__x64_sys_ioctl+0x82/0xa0
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf20558aff
RSP: 002b:00007ffd318a9e30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000000200c0 RCX: 00007fdf20558aff
RDX: 00007fdf1feb2010 RSI: 00000000c0c0583b RDI: 0000000000000003
RBP: 00005625c0634be0 R08: 00005625c0634c40 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdf1feb2010
R13: 00005625be70d994 R14: 0000000000000800 R15: 0000000000000000
For GETFSMAP calls, the caller selects a physical block device by
writing its block number into fsmap_head.fmh_keys[01].fmr_device.
To query mappings for a subrange of the device, the starting byte of the
range is written to fsmap_head.fmh_keys[0].fmr_physical and the last
byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical.
IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd
set the inputs as follows:
fmh_keys[0] = { .fmr_device = major(8, 0), .fmr_physical = 3},
fmh_keys[1] = { .fmr_device = major(8, 0), .fmr_physical = 14},
Which would return you whatever is mapped in the 12 bytes starting at
physical offset 3.
The crash is due to insufficient range validation of keys[1] in
ext4_getfsmap_datadev. On 1k-block filesystems, block 0 is not part of
the filesystem, which means that s_first_data_block is nonzero.
ext4_get_group_no_and_offset subtracts this quantity from the blocknr
argument before cracking it into a group number and a block number
within a group. IOWs, block group 0 spans blocks 1-8192 (1-based)
instead of 0-8191 (0-based) like what happens with larger blocksizes.
The net result of this encoding is that blocknr < s_first_data_block is
not a valid input to this function. The end_fsb variable is set from
the keys that are copied from userspace, which means that in the above
example, its value is zero. That leads to an underflow here:
blocknr = blocknr - le32_to_cpu(es->s_first_data_block);
The division then operates on -1:
offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >>
EXT4_SB(sb)->s_cluster_bits;
Leaving an impossibly large group number (2^32-1) in blocknr.
ext4_getfsmap_check_keys checked that keys[0].fmr_physical and
keys[1].fmr_physical are in increasing order, but
ext4_getfsmap_datadev adjusts keys[0].fmr_physical to be at least
s_first_data_block. This implies that we have to check it again after
the adjustment, which is the piece that I forgot.
Reported-by: syzbot+6be2b977c89f79b6b153@syzkaller.appspotmail.com
Fixes: 4a4956249d ("ext4: fix off-by-one fsmap error on 1k block filesystems")
Link: https://syzkaller.appspot.com/bug?id=79d5768e9bfe362911ac1a5057a36fc6b5c30002
Cc: stable@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/Y+58NPTH7VNGgzdd@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A significant number of xfstests can cause ext4 to log one or more
warning messages when they are run on a test file system where the
inline_data feature has been enabled. An example:
"EXT4-fs warning (device vdc): ext4_dirblock_csum_set:425: inode
#16385: comm fsstress: No space for directory leaf checksum. Please
run e2fsck -D."
The xfstests include: ext4/057, 058, and 307; generic/013, 051, 068,
070, 076, 078, 083, 232, 269, 270, 390, 461, 475, 476, 482, 579, 585,
589, 626, 631, and 650.
In this situation, the warning message indicates a bug in the code that
performs the RENAME_WHITEOUT operation on a directory entry that has
been stored inline. It doesn't detect that the directory is stored
inline, and incorrectly attempts to compute a dirent block checksum on
the whiteout inode when creating it. This attempt fails as a result
of the integrity checking in get_dirent_tail (usually due to a failure
to match the EXT4_FT_DIR_CSUM magic cookie), and the warning message
is then emitted.
Fix this by simply collecting the inlined data state at the time the
search for the source directory entry is performed. Existing code
handles the rest, and this is sufficient to eliminate all spurious
warning messages produced by the tests above. Go one step further
and do the same in the code that resets the source directory entry in
the event of failure. The inlined state should be present in the
"old" struct, but given the possibility of a race there's no harm
in taking a conservative approach and getting that information again
since the directory entry is being reread anyway.
Fixes: b7ff91fd03 ("ext4: find old entry again if failed to rename whiteout")
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230210173244.679890-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230209-kobj_type-ext4-v1-1-6865fb05c1f8@weissschuh.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), ext4 encrypts the
pagecache page into a bounce page, then writes the bounce page.
It also passes the bounce page to wbc_account_cgroup_owner(). That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.
Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().
Fixes: 001e4a8775 ("ext4: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203005503.141557-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reflect in their naming and document that they are kept around for
legacy reasons and shouldn't be used anymore by new code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Remove struct posix_acl_{access,default}_handler for all filesystems
that don't depend on the xattr handler in their inode->i_op->listxattr()
method in any way. There's nothing more to do than to simply remove the
handler. It's been effectively unused ever since we introduced the new
posix acl api.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
direct I/O writes to preallocated blocks by using a shared inode lock
instead of taking an exclusive lock.
In addition, multiple bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmP9gYkACgkQ8vlZVpUN
gaNN0AgAqwS873C9QX7QQK8tE+VvKT7iteNaJ68c/CMymSP7o5RdalbQRiAsSy/Q
88PjBFVFQOsIa1d7OAUr50RHQODjOuOz6SJpitKKPnVC89gAzDt7Pk1AQzABjR37
GY7nneHTQs6fGXLMUz/SlsU+7a08Bz5BeAxVBQxzkRL6D28/sbpT6Iw1tDhUUsug
0o3kz/RolEopCzjhmH/Fpxt5RlBnTya5yX8IgmfEV3y7CfQ+XcTWgRebqDXxVCBE
/VCZOl2cv5n4PFlRH8eUihmyO5iu7p9W9ro6HbLEuxQXwcRNY7skONidceim2EYh
KzWZt59/JAs0DyvRWqZ9irtPDkuYqA==
=OIYo
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Improve performance for ext4 by allowing multiple process to perform
direct I/O writes to preallocated blocks by using a shared inode lock
instead of taking an exclusive lock.
In addition, multiple bug fixes and cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix incorrect options show of original mount_opt and extend mount_opt2
ext4: Fix possible corruption when moving a directory
ext4: init error handle resource before init group descriptors
ext4: fix task hung in ext4_xattr_delete_inode
jbd2: fix data missing when reusing bh which is ready to be checkpointed
ext4: update s_journal_inum if it changes after journal replay
ext4: fail ext4_iget if special inode unallocated
ext4: fix function prototype mismatch for ext4_feat_ktype
ext4: remove unnecessary variable initialization
ext4: fix inode tree inconsistency caused by ENOMEM
ext4: refuse to create ea block when umounted
ext4: optimize ea_inode block expansion
ext4: remove dead code in updating backup sb
ext4: dio take shared inode lock when overwriting preallocated blocks
ext4: don't show commit interval if it is zero
ext4: use ext4_fc_tl_mem in fast-commit replay path
ext4: improve xattr consistency checking and error reporting
Current _ext4_show_options() do not distinguish MOPT_2 flag, so it mixed
extend sbi->s_mount_opt2 options with sbi->s_mount_opt, it could lead to
show incorrect options, e.g. show fc_debug_force if we mount with
errors=continue mode and miss it if we set.
$ mkfs.ext4 /dev/pmem0
$ mount -o errors=remount-ro /dev/pmem0 /mnt
$ cat /proc/fs/ext4/pmem0/options | grep fc_debug_force
#empty
$ mount -o remount,errors=continue /mnt
$ cat /proc/fs/ext4/pmem0/options | grep fc_debug_force
fc_debug_force
$ mount -o remount,errors=remount-ro,fc_debug_force /mnt
$ cat /proc/fs/ext4/pmem0/options | grep fc_debug_force
#empty
Fixes: 995a3ed67f ("ext4: add fast_commit feature and handling for extended mount options")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230129034939.3702550-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we are renaming a directory to a different directory, we need to
update '..' entry in the moved directory. However nothing prevents moved
directory from being modified and even converted from the inline format
to the normal format. When such race happens the rename code gets
confused and we crash. Fix the problem by locking the moved directory.
CC: stable@vger.kernel.org
Fixes: 32f7f22c0b ("ext4: let ext4_rename handle inline dir")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230126112221.11866-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now, 's_err_report' timer is init after ext4_group_desc_init() when fill
super. Theoretically, ext4_group_desc_init() may access to error handle
as follows:
__ext4_fill_super
ext4_group_desc_init
ext4_check_descriptors
ext4_get_group_desc
ext4_error
ext4_handle_error
ext4_commit_super
ext4_update_super
if (!es->s_error_count)
mod_timer(&sbi->s_err_report, jiffies + 24*60*60*HZ);
--> Accessing Uninitialized Variables
timer_setup(&sbi->s_err_report, print_daily_error_info, 0);
Maybe above issue is just theoretical, as ext4_check_descriptors() didn't
judge 'gpd' which get from ext4_get_group_desc(), if access to error handle
ext4_get_group_desc() will return NULL, then will trigger null-ptr-deref in
ext4_check_descriptors().
However, from the perspective of pure code, it is better to initialize
resource that may need to be used first.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230119013711.86680-1-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Most notable is a set of zlib changes from Mikhail Zaslonko which enhances
and fixes zlib's use of S390 hardware support: "lib/zlib: Set of s390
DFLTCC related patches for kernel zlib".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/QC4QAKCRDdBJ7gKXxA
jtKdAQCbDCBdY8H45d1fONzQW2UDqCPnOi77MpVUxGL33r+1SAEA807C7rvDEmlf
yP1Ft+722fFU5jogVU8ZFh+vapv2/gI=
=Q9YK
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"There is no particular theme here - mainly quick hits all over the
tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which
enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
of s390 DFLTCC related patches for kernel zlib'"
* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
Update CREDITS file entry for Jesper Juhl
sparc: allow PM configs for sparc32 COMPILE_TEST
hung_task: print message when hung_task_warnings gets down to zero.
arch/Kconfig: fix indentation
scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
nilfs2: prevent WARNING in nilfs_dat_commit_end()
lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
lib/zlib: DFLTCC support inflate with small window
lib/zlib: Split deflate and inflate states for DFLTCC
lib/zlib: DFLTCC not writing header bits when avail_out == 0
lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
lib/zlib: implement switching between DFLTCC and software
lib/zlib: adjust offset calculation for dfltcc_state
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
scripts/spelling.txt: add "exsits" pattern and fix typo instances
fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
cramfs: Kconfig: fix spelling & punctuation
...
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
- Replace 0-length and 1-element arrays with flexible arrays in various
subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer size
-----BEGIN PGP SIGNATURE-----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=XnVa
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Beyond some specific LoadPin, UBSAN, and fortify features, there are
other fixes scattered around in various subsystems where maintainers
were okay with me carrying them in my tree or were non-responsive but
the patches were reviewed by others:
- Replace 0-length and 1-element arrays with flexible arrays in
various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer
size"
* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: disable Clang 15 support
uaccess: Add minimum bounds check on kernel buffer size
arm64: Support Clang UBSAN trap codes for better reporting
coda: Avoid partial allocation of sig_inputArgs
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
lib/string: Use strchr() in strpbrk()
crypto: hisilicon: Wipe entire pool on error
net/i40e: Replace 0-length array with flexible array
io_uring: Replace 0-length array with flexible array
ext4: Fix function prototype mismatch for ext4_feat_ktype
i915/gvt: Replace one-element array with flexible-array member
drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
LoadPin: Allow filesystem switch when not enforcing
LoadPin: Move pin reporting cleanly out of locking
LoadPin: Refactor sysctl initialization
LoadPin: Refactor read-only check into a helper
ARM: ixp4xx: Replace 0-length arrays with flexible arrays
fortify: Use __builtin_dynamic_object_size() when available
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
Fix the longstanding implementation limitation that fsverity was only
supported when the Merkle tree block size, filesystem block size, and
PAGE_SIZE were all equal. Specifically, add support for Merkle tree
block sizes less than PAGE_SIZE, and make ext4 support fsverity on
filesystems where the filesystem block size is less than PAGE_SIZE.
Effectively, this means that fsverity can now be used on systems with
non-4K pages, at least on ext4. These changes have been tested using
the verity group of xfstests, newly updated to cover the new code paths.
Also update fs/verity/ to support verifying data from large folios.
There's also a similar patch for fs/crypto/, to support decrypting data
from large folios, which I'm including in this pull request to avoid a
merge conflict between the fscrypt and fsverity branches.
There will be a merge conflict in fs/buffer.c with some of the foliation
work in the mm tree. Please use the merge resolution from linux-next.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY/KJtRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/A/AP0RUlCClBRuHwXPRG0we8R1L153ga4s
Vl+xRpCr+SswXwEAiOEpYN5cXoVKzNgxbEXo2pQzxi5lrpjZgUI6CL3DuQs=
=ZRFX
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"Fix the longstanding implementation limitation that fsverity was only
supported when the Merkle tree block size, filesystem block size, and
PAGE_SIZE were all equal.
Specifically, add support for Merkle tree block sizes less than
PAGE_SIZE, and make ext4 support fsverity on filesystems where the
filesystem block size is less than PAGE_SIZE.
Effectively, this means that fsverity can now be used on systems with
non-4K pages, at least on ext4. These changes have been tested using
the verity group of xfstests, newly updated to cover the new code
paths.
Also update fs/verity/ to support verifying data from large folios.
There's also a similar patch for fs/crypto/, to support decrypting
data from large folios, which I'm including in here to avoid a merge
conflict between the fscrypt and fsverity branches"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fscrypt: support decrypting data from large folios
fsverity: support verifying data from large folios
fsverity.rst: update git repo URL for fsverity-utils
ext4: allow verity with fs block size < PAGE_SIZE
fs/buffer.c: support fsverity in block_read_full_folio()
f2fs: simplify f2fs_readpage_limit()
ext4: simplify ext4_readpage_limit()
fsverity: support enabling with tree block size < PAGE_SIZE
fsverity: support verification with tree block size < PAGE_SIZE
fsverity: replace fsverity_hash_page() with fsverity_hash_block()
fsverity: use EFBIG for file too large to enable verity
fsverity: store log2(digest_size) precomputed
fsverity: simplify Merkle tree readahead size calculation
fsverity: use unsigned long for level_start
fsverity: remove debug messages and CONFIG_FS_VERITY_DEBUG
fsverity: pass pos and size to ->write_merkle_tree_block
fsverity: optimize fsverity_cleanup_inode() on non-verity files
fsverity: optimize fsverity_prepare_setattr() on non-verity files
fsverity: optimize fsverity_file_open() on non-verity files
Simplify the implementation of the test_dummy_encryption mount option by
adding the "test dummy key" on-demand.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY/J7NRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3UVAP9Likiuy47D/RM4mOsPMwLAlQRx5uW6
iGxT6DutekA7DwEA4hNjEQQ/EKO+UxFb+fBCX+xpTDbS3LB7CxGsqHzZJQM=
=SiNJ
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers:
"Simplify the implementation of the test_dummy_encryption mount option
by adding the 'test dummy key' on-demand"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: clean up fscrypt_add_test_dummy_key()
fs/super.c: stop calling fscrypt_destroy_keyring() from __put_super()
f2fs: stop calling fscrypt_add_test_dummy_key()
ext4: stop calling fscrypt_add_test_dummy_key()
fscrypt: add the test dummy encryption key on-demand
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
=+BG5
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
Syzbot reported a hung task problem:
==================================================================
INFO: task syz-executor232:5073 blocked for more than 143 seconds.
Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5244 [inline]
__schedule+0x995/0xe20 kernel/sched/core.c:6555
schedule+0xcb/0x190 kernel/sched/core.c:6631
__wait_on_freeing_inode fs/inode.c:2196 [inline]
find_inode_fast+0x35a/0x4c0 fs/inode.c:950
iget_locked+0xb1/0x830 fs/inode.c:1273
__ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861
ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389
ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148
ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880
ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296
evict+0x2a4/0x620 fs/inode.c:664
ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474
__ext4_fill_super fs/ext4/super.c:5516 [inline]
ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644
get_tree_bdev+0x400/0x620 fs/super.c:1282
vfs_get_tree+0x88/0x270 fs/super.c:1489
do_new_mount+0x289/0xad0 fs/namespace.c:3145
do_mount fs/namespace.c:3488 [inline]
__do_sys_mount fs/namespace.c:3697 [inline]
__se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa5406fd5ea
RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea
RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970
RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432
R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004
R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000
</TASK>
==================================================================
The problem is that the inode contains an xattr entry with ea_inum of 15
when cleaning up an orphan inode <15>. When evict inode <15>, the reference
counting of the corresponding EA inode is decreased. When EA inode <15> is
found by find_inode_fast() in __ext4_iget(), it is found that the EA inode
holds the I_FREEING flag and waits for the EA inode to complete deletion.
As a result, when inode <15> is being deleted, we wait for inode <15> to
complete the deletion, resulting in an infinite loop and triggering Hung
Task. To solve this problem, we only need to check whether the ino of EA
inode and parent is the same before getting EA inode.
Link: https://syzkaller.appspot.com/bug?extid=77d6fcc37bbb92f26048
Reported-by: syzbot+77d6fcc37bbb92f26048@syzkaller.appspotmail.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110133436.996350-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When mounting a crafted ext4 image, s_journal_inum may change after journal
replay, which is obviously unreasonable because we have successfully loaded
and replayed the journal through the old s_journal_inum. And the new
s_journal_inum bypasses some of the checks in ext4_get_journal(), which
may trigger a null pointer dereference problem. So if s_journal_inum
changes after the journal replay, we ignore the change, and rewrite the
current journal_inum to the superblock.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216541
Reported-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230107032126.4165860-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_fill_super(), EXT4_ORPHAN_FS flag is cleared after
ext4_orphan_cleanup() is executed. Therefore, when __ext4_iget() is
called to get an inode whose i_nlink is 0 when the flag exists, no error
is returned. If the inode is a special inode, a null pointer dereference
may occur. If the value of i_nlink is 0 for any inodes (except boot loader
inodes) got by using the EXT4_IGET_SPECIAL flag, the current file system
is corrupted. Therefore, make the ext4_iget() function return an error if
it gets such an abnormal special inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199179
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216541
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216539
Reported-by: Luís Henriques <lhenriques@suse.de>
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230107032126.4165860-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
ext4_feat_ktype was setting the "release" handler to "kfree", which
doesn't have a matching function prototype. Add a simple wrapper
with the correct prototype.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Note that this code is only reached when ext4 is a loadable module and
it is being unloaded:
CFI failure at kobject_put+0xbb/0x1b0 (target: kfree+0x0/0x180; expected type: 0x7c4aa698)
...
RIP: 0010:kobject_put+0xbb/0x1b0
...
Call Trace:
<TASK>
ext4_exit_sysfs+0x14/0x60 [ext4]
cleanup_module+0x67/0xedb [ext4]
Fixes: b99fee58a2 ("ext4: create ext4_feat kobject dynamically")
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230103234616.never.915-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230104210908.gonna.388-kees@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ENOMEM fails when the extent is splitting, we need to restore the length
of the split extent.
In the ext4_split_extent_at function, only in ext4_ext_create_new_leaf will
it alloc memory and change the shape of the extent tree,even if an ENOMEM
is returned at this time, the extent tree is still self-consistent, Just
restore the split extent lens in the function ext4_split_extent_at.
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
1)ext4_ext_split
ext4_find_extent
2)ext4_ext_grow_indepth
ext4_find_extent
Signed-off-by: zhanchengbin <zhanchengbin1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230103022812.130603-1-zhanchengbin1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_update_backup_sb checks for err having some value
after unlocking buffer. But err has not been updated
till that point in any code which will lead execution
of the code in question.
Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221230141858.3828-1-007047221b@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the dio write path, we only take shared inode lock for the case of
aligned overwriting initialized blocks inside EOF. But for overwriting
preallocated blocks, it may only need to split unwritten extents, this
procedure has been protected under i_data_sem lock, it's safe to
release the exclusive inode lock and take shared inode lock.
This could give a significant speed up for multi-threaded writes. Test
on Intel Xeon Gold 6140 and nvme SSD with below fio parameters.
direct=1
ioengine=libaio
iodepth=10
numjobs=10
runtime=60
rw=randwrite
size=100G
And the test result are:
Before:
bs=4k IOPS=11.1k, BW=43.2MiB/s
bs=16k IOPS=11.1k, BW=173MiB/s
bs=64k IOPS=11.2k, BW=697MiB/s
After:
bs=4k IOPS=41.4k, BW=162MiB/s
bs=16k IOPS=41.3k, BW=646MiB/s
bs=64k IOPS=13.5k, BW=843MiB/s
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221226062015.3479416-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To avoid 'sparse' warnings about missing endianness conversions, don't
store native endianness values into struct ext4_fc_tl. Instead, use a
separate struct type, ext4_fc_tl_mem.
Fixes: dcc5827484 ("ext4: factor out ext4_fc_get_tl()")
Cc: Ye Bin <yebin10@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221217050212.150665-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Refactor the in-inode and xattr block consistency checking, and report
more fine-grained reports of the consistency problems. Also add more
consistency checks for ea_inode number.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20221214200818.870087-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that fs/crypto/ adds the test dummy encryption key on-demand when
it's needed, there's no need for individual filesystems to call
fscrypt_add_test_dummy_key(). Remove the call to it from ext4.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230208062107.199831-3-ebiggers@kernel.org
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
ext4_update_bh_state. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move instruction
in front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails. There is no need to re-read the value in the loop.
No functional change intended.
Link: https://lkml.kernel.org/r/20221102071147.6642-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Convert writepage_t to use a folio".
More folioisation. I split out the mpage work from everything else
because it completely dominated the patch, but some implementations I just
converted outright.
This patch (of 2):
We always write back an entire folio, but that's currently passed as the
head page. Convert all filesystems that use write_cache_pages() to expect
a folio instead of a page.
Link: https://lkml.kernel.org/r/20230126201255.1681189-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230126201255.1681189-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the function to use folios throughout. This is in preparation for
the removal of find_get_pages_range_tag(). Now supports large folios.
This change removes 11 calls to compound_head().
Link: https://lkml.kernel.org/r/20230104211448.4804-11-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Try to make the filesystem-level decryption functions in fs/crypto/
aware of large folios. This includes making fscrypt_decrypt_bio()
support the case where the bio contains large folios, and making
fscrypt_decrypt_pagecache_blocks() take a folio instead of a page.
There's no way to actually test this with large folios yet, but I've
tested that this doesn't cause any regressions.
Note that this patch just handles *decryption*, not encryption which
will be a little more difficult.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230127224202.355629-1-ebiggers@kernel.org
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
ext4_feat_ktype was setting the "release" handler to "kfree", which
doesn't have a matching function prototype. Add a simple wrapper
with the correct prototype.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Note that this code is only reached when ext4 is a loadable module and
it is being unloaded:
CFI failure at kobject_put+0xbb/0x1b0 (target: kfree+0x0/0x180; expected type: 0x7c4aa698)
...
RIP: 0010:kobject_put+0xbb/0x1b0
...
Call Trace:
<TASK>
ext4_exit_sysfs+0x14/0x60 [ext4]
cleanup_module+0x67/0xedb [ext4]
Fixes: b99fee58a2 ("ext4: create ext4_feat kobject dynamically")
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230103234616.never.915-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230104210908.gonna.388-kees@kernel.org
Commit f3bbac3247 ("ext4: deal with legacy signed xattr name hash
values") added a hashing function for the legacy case of having the
xattr hash calculated using a signed 'char' type. It left the unsigned
case alone, since it's all implicitly handled by the '-funsigned-char'
compiler option.
However, there's been some noise about back-porting it all into stable
kernels that lack the '-funsigned-char', so let's just make that at
least possible by making the whole 'this uses unsigned char' very
explicit in the code itself. Whether such a back-port is really
warranted or not, I'll leave to others, but at least together with this
change it is technically sensible.
Also, add a 'pr_warn_once()' for reporting the "hey, signedness for this
hash calculation has changed" issue. Hopefully it never triggers except
for that xfstests generic/454 test-case, but even if it does it's just
good information to have.
If for no other reason than "we can remove the legacy signed hash code
entirely if nobody ever sees the message any more".
Cc: Sasha Levin <sashal@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We potentially have old hashes of the xattr names generated on systems
with signed 'char' types. Now that everybody uses '-funsigned-char',
those hashes will no longer match.
This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.
Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c06d ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert mext_page_double_lock() to use folios. This change saves 146
bytes of kernel text. It also removes 6 calls to compound_head() and 2
calls to folio_file_page().
Link: https://lkml.kernel.org/r/20221207181009.4016-1-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that the needed changes have been made to fs/buffer.c, ext4 is ready
to support the verity feature when the filesystem block size is less
than the page size. So remove the mount-time check that prevented this.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-12-ebiggers@kernel.org
Now that the implementation of FS_IOC_ENABLE_VERITY has changed to not
involve reading back Merkle tree blocks that were previously written,
there is no need for ext4_readpage_limit() to allow for this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-9-ebiggers@kernel.org
fsverity_operations::write_merkle_tree_block is passed the index of the
block to write and the log base 2 of the block size. However, all
implementations of it use these parameters only to calculate the
position and the size of the block, in bytes.
Therefore, make ->write_merkle_tree_block take 'pos' and 'size'
parameters instead of 'index' and 'log_blocksize'.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20221214224304.145712-5-ebiggers@kernel.org
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- More userfaultfs work from Peter Xu.
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying.
- Some filemap cleanups from Vishal Moola.
- David Hildenbrand added the ability to selftest anon memory COW handling.
- Some cpuset simplifications from Liu Shixin.
- Addition of vmalloc tracing support by Uladzislau Rezki.
- Some pagecache folioifications and simplifications from Matthew Wilcox.
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it.
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword. This series shold have been in the
non-MM tree, my bad.
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages.
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages.
- Peter Xu utilized the PTE marker code for handling swapin errors.
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient.
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand.
- zram support for multiple compression streams from Sergey Senozhatsky.
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway.
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations.
- Vishal Moola removed the try_to_release_page() wrapper.
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache.
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking.
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend.
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range().
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen.
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect.
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages().
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting.
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines.
- Many singleton patches, as usual.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA
jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml
CodAgiA51qwzId3GRytIo/tfWZSezgA=
=d19R
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
The main change this cycle is to stop using the PG_error flag to track
verity failures, and instead just track failures at the bio level. This
follows a similar fscrypt change that went into 6.1, and it is a step
towards freeing up PG_error for other uses.
There's also one other small cleanup.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCY5anyRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK1IPAP0SMSKJRgehpXHKp5QZxHSpAjkFlcGa
2y8Lc+DlHOrfLQEAmpGAxewowkMzpYVXmlAVVHRgUPWLjoMQQELEUQ8mWgU=
=M+pB
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"The main change this cycle is to stop using the PG_error flag to track
verity failures, and instead just track failures at the bio level.
This follows a similar fscrypt change that went into 6.1, and it is a
step towards freeing up PG_error for other uses.
There's also one other small cleanup"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fsverity: simplify fsverity_get_digest()
fsverity: stop using PG_error to track error status
found by Syzbot and fuzzing. (Many of the bug fixes involve less-used
ext4 features such as fast_commit, inline_data and bigalloc.)
In addition, remove the writepage function for ext4, since the
medium-term plan is to remove ->writepage() entirely. (The VM doesn't
need or want writepage() for writeback, since it is fine with
->writepages() so long as ->migrate_folio() is implemented.)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmOWqrMACgkQ8vlZVpUN
gaMvmgf+P2C6vzjn13ZdF+GwFTi4fx4TJ5BZT78LQqvTZqhkfk4k1q2SFfHI7nXT
ZWdu1KUQ0SYLo64oaSU9W+2B2pmGi/KgUlrwNhy8DFeGStogPuDVfmGWB63p1UQL
ld42mE9q7bjY6nCZSKYXPp2jfSwsHuliHBJ4UfzVNAIwjiUEJ7pGeIrMFdLAEkVm
TVNzvlUZaHUnVxhpsP6hs+5WNhHQ2IhWz4rwX01ussNgHTijYac4iaL05wpTvF5e
6NtvfmpOEMAbYrmIkJX4RVss4JNsHNOC0E8fjEHlgXJxBiAI6w8GxTxrS52Y4ELH
nHXl/pc0L+I8+yh9B9+s0LBaSuPuTg==
=lezv
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A large number of cleanups and bug fixes, with many of the bug fixes
found by Syzbot and fuzzing. (Many of the bug fixes involve less-used
ext4 features such as fast_commit, inline_data and bigalloc)
In addition, remove the writepage function for ext4, since the
medium-term plan is to remove ->writepage() entirely. (The VM doesn't
need or want writepage() for writeback, since it is fine with
->writepages() so long as ->migrate_folio() is implemented)"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: fix reserved cluster accounting in __es_remove_extent()
ext4: fix inode leak in ext4_xattr_inode_create() on an error path
ext4: allocate extended attribute value in vmalloc area
ext4: avoid unaccounted block allocation when expanding inode
ext4: initialize quota before expanding inode in setproject ioctl
ext4: stop providing .writepage hook
mm: export buffer_migrate_folio_norefs()
ext4: switch to using write_cache_pages() for data=journal writeout
jbd2: switch jbd2_submit_inode_data() to use fs-provided hook for data writeout
ext4: switch to using ext4_do_writepages() for ordered data writeout
ext4: move percpu_rwsem protection into ext4_writepages()
ext4: provide ext4_do_writepages()
ext4: add support for writepages calls that cannot map blocks
ext4: drop pointless IO submission from ext4_bio_write_page()
ext4: remove nr_submitted from ext4_bio_write_page()
ext4: move keep_towrite handling to ext4_bio_write_page()
ext4: handle redirtying in ext4_bio_write_page()
ext4: fix kernel BUG in 'ext4_write_inline_data_end()'
ext4: make ext4_mb_initialize_context return void
ext4: fix deadlock due to mbcache entry corruption
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bwTgAKCRCRxhvAZXjc
ovd2AQCK00NAtGjQCjQPQGyTa4GAPqvWgq1ef0lnhv+TL5US5gD9FncQ8UofeMXt
pBfjtAD6ettTPCTxUQfnTwWEU4rc7Qg=
=27Wm
-----END PGP SIGNATURE-----
Merge tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull VFS acl updates from Christian Brauner:
"This contains the work that builds a dedicated vfs posix acl api.
The origins of this work trace back to v5.19 but it took quite a while
to understand the various filesystem specific implementations in
sufficient detail and also come up with an acceptable solution.
As we discussed and seen multiple times the current state of how posix
acls are handled isn't nice and comes with a lot of problems: The
current way of handling posix acls via the generic xattr api is error
prone, hard to maintain, and type unsafe for the vfs until we call
into the filesystem's dedicated get and set inode operations.
It is already the case that posix acls are special-cased to death all
the way through the vfs. There are an uncounted number of hacks that
operate on the uapi posix acl struct instead of the dedicated vfs
struct posix_acl. And the vfs must be involved in order to interpret
and fixup posix acls before storing them to the backing store, caching
them, reporting them to userspace, or for permission checking.
Currently a range of hacks and duct tape exist to make this work. As
with most things this is really no ones fault it's just something that
happened over time. But the code is hard to understand and difficult
to maintain and one is constantly at risk of introducing bugs and
regressions when having to touch it.
Instead of continuing to hack posix acls through the xattr handlers
this series builds a dedicated posix acl api solely around the get and
set inode operations.
Going forward, the vfs_get_acl(), vfs_remove_acl(), and vfs_set_acl()
helpers must be used in order to interact with posix acls. They
operate directly on the vfs internal struct posix_acl instead of
abusing the uapi posix acl struct as we currently do. In the end this
removes all of the hackiness, makes the codepaths easier to maintain,
and gets us type safety.
This series passes the LTP and xfstests suites without any
regressions. For xfstests the following combinations were tested:
- xfs
- ext4
- btrfs
- overlayfs
- overlayfs on top of idmapped mounts
- orangefs
- (limited) cifs
There's more simplifications for posix acls that we can make in the
future if the basic api has made it.
A few implementation details:
- The series makes sure to retain exactly the same security and
integrity module permission checks. Especially for the integrity
modules this api is a win because right now they convert the uapi
posix acl struct passed to them via a void pointer into the vfs
struct posix_acl format to perform permission checking on the mode.
There's a new dedicated security hook for setting posix acls which
passes the vfs struct posix_acl not a void pointer. Basing checking
on the posix acl stored in the uapi format is really unreliable.
The vfs currently hacks around directly in the uapi struct storing
values that frankly the security and integrity modules can't
correctly interpret as evidenced by bugs we reported and fixed in
this area. It's not necessarily even their fault it's just that the
format we provide to them is sub optimal.
- Some filesystems like 9p and cifs need access to the dentry in
order to get and set posix acls which is why they either only
partially or not even at all implement get and set inode
operations. For example, cifs allows setxattr() and getxattr()
operations but doesn't allow permission checking based on posix
acls because it can't implement a get acl inode operation.
Thus, this patch series updates the set acl inode operation to take
a dentry instead of an inode argument. However, for the get acl
inode operation we can't do this as the old get acl method is
called in e.g., generic_permission() and inode_permission(). These
helpers in turn are called in various filesystem's permission inode
operation. So passing a dentry argument to the old get acl inode
operation would amount to passing a dentry to the permission inode
operation which we shouldn't and probably can't do.
So instead of extending the existing inode operation Christoph
suggested to add a new one. He also requested to ensure that the
get and set acl inode operation taking a dentry are consistently
named. So for this version the old get acl operation is renamed to
->get_inode_acl() and a new ->get_acl() inode operation taking a
dentry is added. With this we can give both 9p and cifs get and set
acl inode operations and in turn remove their complex custom posix
xattr handlers.
In the future I hope to get rid of the inode method duplication but
it isn't like we have never had this situation. Readdir is just one
example. And frankly, the overall gain in type safety and the more
pleasant api wise are simply too big of a benefit to not accept
this duplication for a while.
- We've done a full audit of every codepaths using variant of the
current generic xattr api to get and set posix acls and
surprisingly it isn't that many places. There's of course always a
chance that we might have missed some and if so I'm sure we'll find
them soon enough.
The crucial codepaths to be converted are obviously stacking
filesystems such as ecryptfs and overlayfs.
For a list of all callers currently using generic xattr api helpers
see [2] including comments whether they support posix acls or not.
- The old vfs generic posix acl infrastructure doesn't obey the
create and replace semantics promised on the setxattr(2) manpage.
This patch series doesn't address this. It really is something we
should revisit later though.
The patches are roughly organized as follows:
(1) Change existing set acl inode operation to take a dentry
argument (Intended to be a non-functional change)
(2) Rename existing get acl method (Intended to be a non-functional
change)
(3) Implement get and set acl inode operations for filesystems that
couldn't implement one before because of the missing dentry.
That's mostly 9p and cifs (Intended to be a non-functional
change)
(4) Build posix acl api, i.e., add vfs_get_acl(), vfs_remove_acl(),
and vfs_set_acl() including security and integrity hooks
(Intended to be a non-functional change)
(5) Implement get and set acl inode operations for stacking
filesystems (Intended to be a non-functional change)
(6) Switch posix acl handling in stacking filesystems to new posix
acl api now that all filesystems it can stack upon support it.
(7) Switch vfs to new posix acl api (semantical change)
(8) Remove all now unused helpers
(9) Additional regression fixes reported after we merged this into
linux-next
Thanks to Seth for a lot of good discussion around this and
encouragement and input from Christoph"
* tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (36 commits)
posix_acl: Fix the type of sentinel in get_acl
orangefs: fix mode handling
ovl: call posix_acl_release() after error checking
evm: remove dead code in evm_inode_set_acl()
cifs: check whether acl is valid early
acl: make vfs_posix_acl_to_xattr() static
acl: remove a slew of now unused helpers
9p: use stub posix acl handlers
cifs: use stub posix acl handlers
ovl: use stub posix acl handlers
ecryptfs: use stub posix acl handlers
evm: remove evm_xattr_acl_change()
xattr: use posix acl api
ovl: use posix acl api
ovl: implement set acl method
ovl: implement get acl method
ecryptfs: implement set acl method
ecryptfs: implement get acl method
ksmbd: use vfs_remove_acl()
acl: add vfs_remove_acl()
...
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
There is issue as follows when do setxattr with inject fault:
[localhost]# fsck.ext4 -fn /dev/sda
e2fsck 1.46.6-rc1 (12-Sep-2022)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Unattached zero-length inode 15. Clear? no
Unattached inode 15
Connect to /lost+found? no
Pass 5: Checking group summary information
/dev/sda: ********** WARNING: Filesystem still has errors **********
/dev/sda: 15/655360 files (0.0% non-contiguous), 66755/2621440 blocks
This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()'
fails, dropping i_nlink of the inode is needed. Or will lead to inode leak.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221208023233.1231330-5-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Now, extended attribute value maximum length is 64K. The memory
requested here does not need continuous physical addresses, so it is
appropriate to use kvmalloc to request memory. At the same time, it
can also cope with the situation that the extended attribute will
become longer in the future.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221208023233.1231330-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
When expanding inode space in ext4_expand_extra_isize_ea() we may need
to allocate external xattr block. If quota is not initialized for the
inode, the block allocation will not be accounted into quota usage. Make
sure the quota is initialized before we try to expand inode space.
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/all/Y5BT+k6xWqthZc1P@xpf.sh.intel.com
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221207115937.26601-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make sure we initialize quotas before possibly expanding inode space
(and thus maybe needing to allocate external xattr block) in
ext4_ioctl_setproject(). This prevents not accounting the necessary
block allocation.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221207115937.26601-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now we don't need .writepage hook for anything anymore. Reclaim is
fine with relying on .writepages to clean pages and we often couldn't
do much from the .writepage callback anyway. We only need to provide
.migrate_folio callback for the ext4_journalled_aops - let's use
buffer_migrate_page_norefs() there so that buffers cannot be modified
under jdb2's hands as that can cause data corruption. For example when
commit code does writeout of transaction buffers in
jbd2_journal_write_metadata_buffer(), we don't hold page lock or have
page writeback bit set or have the buffer locked. So page migration
code would go and happily migrate the page elsewhere while the copy is
running thus corrupting data.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-12-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of using generic_writepages(), let's use write_cache_pages() for
writeout of journalled data. It will allow us to stop providing
.writepage callback. Our data=journal writeback path would benefit from
a larger cleanup and refactoring but that's for a separate cleanup
series.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_submit_inode_data() hardcoded use of
jbd2_journal_submit_inode_data_buffers() for submission of data pages.
Make it use j_submit_inode_data_buffers hook instead. This effectively
switches ext4 fastcommits to use ext4_writepages() for data writeout
instead of generic_writepages().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the standard writepages method (ext4_do_writepages()) to perform
writeout of ordered data during journal commit.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move protection by percpu_rwsem from ext4_do_writepages() to
ext4_writepages(). We will not want to grab this protection during
transaction commits as that would be prone to deadlocks and the
protection is not needed. Move the shutdown state checking as well since
we want to be able to complete commit while the shutdown is in progress.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Provide ext4_do_writepages() function that takes mpage_da_data as an
argument and make ext4_writepages() just a simple wrapper around it. No
functional changes.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add support for calls to ext4_writepages() than cannot map blocks. These
will be issued from jbd2 transaction commit code.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We submit outstanding IO in ext4_bio_write_page() if we find a buffer we
are not going to write. This is however pointless because we already
handle submission of previous IO in case we detect newly added buffer
head is discontiguous. So just delete the pointless IO submission call.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
nr_submitted is the same as nr_to_submit. Drop one of them.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we are writing back page but we cannot for some reason write all
its buffers (e.g. because we cannot allocate blocks in current context) we
have to keep TOWRITE tag set in the mapping as otherwise racing
WB_SYNC_ALL writeback that could write these buffers can skip the page
and result in data loss. We will need this logic for writeback during
transaction commit so move the logic from ext4_writepage() to
ext4_bio_write_page().
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since we want to transition transaction commits to use ext4_writepages()
for writing back ordered, add handling of page redirtying into
ext4_bio_write_page(). Also move buffer dirty bit clearing into the same
place other buffer state handling.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221207112722.22220-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change the return type to void since it always return 0, and no need
to do the checking in ext4_mb_new_blocks.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221202120409.24098-1-guoqing.jiang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When manipulating xattr blocks, we can deadlock infinitely looping
inside ext4_xattr_block_set() where we constantly keep finding xattr
block for reuse in mbcache but we are unable to reuse it because its
reference count is too big. This happens because cache entry for the
xattr block is marked as reusable (e_reusable set) although its
reference count is too big. When this inconsistency happens, this
inconsistent state is kept indefinitely and so ext4_xattr_block_set()
keeps retrying indefinitely.
The inconsistent state is caused by non-atomic update of e_reusable bit.
e_reusable is part of a bitfield and e_reusable update can race with
update of e_referenced bit in the same bitfield resulting in loss of one
of the updates. Fix the problem by using atomic bitops instead.
This bug has been around for many years, but it became *much* easier
to hit after commit 65f8b80053 ("ext4: fix race when reusing xattr
blocks").
Cc: stable@vger.kernel.org
Fixes: 6048c64b26 ("mbcache: add reusable flag to cache entries")
Fixes: 65f8b80053 ("ext4: fix race when reusing xattr blocks")
Reported-and-tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: Thilo Fromm <t-lo@linux.microsoft.com>
Link: https://lore.kernel.org/r/c77bf00f-4618-7149-56f1-b8d1664b9d07@linux.microsoft.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20221123193950.16758-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit fb0a387dcd ("ext4: limit block allocations for indirect-block
files to < 2^32") added code to try to allocate xattr block with 32-bit
block number for indirect block based files on the grounds that these
files cannot use larger block numbers. It also added BUG_ON when
allocated block could not fit into 32 bits. This is however bogus
reasoning because xattr block is stored in inode->i_file_acl and
inode->i_file_acl_hi and as such even indirect block based files can
happily use full 48 bits for xattr block number. The proper handling
seems to be there basically since 64-bit block number support was added.
So remove the bogus limitation and BUG_ON.
Cc: Eric Sandeen <sandeen@redhat.com>
Fixes: fb0a387dcd ("ext4: limit block allocations for indirect-block files to < 2^32")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221121130929.32031-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
When converting files with inline data to extents, delayed allocations
made on a file system created with both the bigalloc and inline options
can result in invalid extent status cache content, incorrect reserved
cluster counts, kernel memory leaks, and potential kernel panics.
With bigalloc, the code that determines whether a block must be
delayed allocated searches the extent tree to see if that block maps
to a previously allocated cluster. If not, the block is delayed
allocated, and otherwise, it isn't. However, if the inline option is
also used, and if the file containing the block is marked as able to
store data inline, there isn't a valid extent tree associated with
the file. The current code in ext4_clu_mapped() calls
ext4_find_extent() to search the non-existent tree for a previously
allocated cluster anyway, which typically finds nothing, as desired.
However, a side effect of the search can be to cache invalid content
from the non-existent tree (garbage) in the extent status tree,
including bogus entries in the pending reservation tree.
To fix this, avoid searching the extent tree when allocating blocks
for bigalloc + inline files that are being converted from inline to
extent mapped.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20221117152207.2424-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
When a backup superblock is updated in update_backups(), the primary
superblock's offset in the group (that is, sbi->s_sbh->b_blocknr) is used
as the backup superblock's offset in its group. However, when the block
size is 1K and bigalloc is enabled, the two offsets are not equal. This
causes the backup group descriptors to be overwritten by the superblock
in update_backups(). Moreover, if meta_bg is enabled, the file system will
be corrupted because this feature uses backup group descriptors.
To solve this issue, we use a more accurate ext4_group_first_block_no() as
the offset of the backup superblock in its group.
Fixes: d77147ff44 ("ext4: add support for online resizing with bigalloc")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221117040341.1380702-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In commit 9a8c5b0d06 ("ext4: update the backup superblock's at the end
of the online resize"), it is assumed that update_backups() only updates
backup superblocks, so each b_data is treated as a backupsuper block to
update its s_block_group_nr and s_checksum. However, update_backups()
also updates the backup group descriptors, which causes the backup group
descriptors to be corrupted.
The above commit fixes the problem of invalid checksum of the backup
superblock. The root cause of this problem is that the checksum of
ext4_update_super() is not set correctly. This problem has been fixed
in the previous patch ("ext4: fix bad checksum after online resize").
However, we do need to set block_group_nr for the backup superblock in
update_backups(). When a block is in a group that contains a backup
superblock, and the block is the first block in the group, the block is
definitely a superblock. We add a helper function that includes setting
s_block_group_nr and updating checksum, and then call it only when the
above conditions are met to prevent the backup group descriptors from
being incorrectly modified.
Fixes: 9a8c5b0d06 ("ext4: update the backup superblock's at the end of the online resize")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221117040341.1380702-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When online resizing is performed twice consecutively, the error message
"Superblock checksum does not match superblock" is displayed for the
second time. Here's the reproducer:
mkfs.ext4 -F /dev/sdb 100M
mount /dev/sdb /tmp/test
resize2fs /dev/sdb 5G
resize2fs /dev/sdb 6G
To solve this issue, we moved the update of the checksum after the
es->s_overhead_clusters is updated.
Fixes: 026d0d27c4 ("ext4: reduce computation of overhead during resize")
Fixes: de394a8665 ("ext4: update s_overhead_clusters in the superblock during an on-line resize")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221117040341.1380702-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If userspace provides a longer UUID buffer than is required, we
shouldn't fail the call with EINVAL -- rather, we can fill the caller's
buffer with the bytes we /can/ fill, and update the length field to
reflect what we copied. This doesn't break the UAPI since we're
enabling a case that currently fails, and so far Ted hasn't released a
version of e2fsprogs that uses the new ext4 ioctl.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
Link: https://lore.kernel.org/r/166811139478.327006.13879198441587445544.stgit@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
If userspace calls this ioctl with fsu_length (the length of the
fsuuid.fsu_uuid array) set to zero, ext4 copies the desired uuid length
out to userspace. The kernel call returned a result from a valid input,
so the return value here should be zero, not EINVAL.
While we're at it, fix the copy_to_user call to make it clear that we're
only copying out fsu_len.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
Link: https://lore.kernel.org/r/166811138914.327006.9241306894437166566.stgit@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
If a block is out of range in ext4_get_branch(), -ENOMEM will be returned
to user-space. Obviously, this error code isn't really useful. This
patch fixes it by making sure the right error code (-EFSCORRUPTED) is
propagated to user-space. EUCLEAN is more informative than ENOMEM.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221109181445.17843-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Replace kmem_cache_create with KMEM_CACHE macro that
guaranteed struct alignment
Signed-off-by: JunChao Sun <sunjunchao2870@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221109153822.80250-1-sunjunchao2870@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we used the journal_async_commit mounting option in nojournal mode,
the kernel told me that "can't mount with journal_checksum", was very
confusing. I find that when we mount with journal_async_commit, both the
JOURNAL_ASYNC_COMMIT and EXPLICIT_JOURNAL_CHECKSUM flags are set. However,
in the error branch, CHECKSUM is checked before ASYNC_COMMIT. As a result,
the above inconsistency occurs, and the ASYNC_COMMIT branch becomes dead
code that cannot be executed. Therefore, we exchange the positions of the
two judgments to make the error msg more accurate.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221109074343.4184862-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The device names are not necessarily consistent across reboots which can
make it more difficult to identify the right file system when tracking
down issues using system logs.
Print file system UUID string on every mount, remount and unmount to
make this task easier.
This is similar to the functionality recently propsed for XFS.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Lukas Herbolt <lukas@herbolt.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20221108145042.85770-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of checksumming each field as it is added to the block, just
checksum each block before it is written. This is simpler, and also
much more efficient.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221106224841.279231-8-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Due to several different off-by-one errors, or perhaps due to a late
change in design that wasn't fully reflected in the code that was
actually merged, there are several very strange constraints on how
fast-commit blocks are filled with tlv entries:
- tlvs must start at least 10 bytes before the end of the block, even
though the minimum tlv length is 8. Otherwise, the replay code will
ignore them. (BUG: ext4_fc_reserve_space() could violate this
requirement if called with a len of blocksize - 9 or blocksize - 8.
Fortunately, this doesn't seem to happen currently.)
- tlvs must end at least 1 byte before the end of the block. Otherwise
the replay code will consider them to be invalid. This quirk
contributed to a bug (fixed by an earlier commit) where uninitialized
memory was being leaked to disk in the last byte of blocks.
Also, strangely these constraints don't apply to the replay code in
e2fsprogs, which will accept any tlvs in the blocks (with no bounds
checks at all, but that is a separate issue...).
Given that this all seems to be a bug, let's fix it by just filling
blocks with tlv entries in the natural way.
Note that old kernels will be unable to replay fast-commit journals
created by kernels that have this commit.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221106224841.279231-7-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As is done elsewhere in the file, build the struct ext4_fc_tl on the
stack and memcpy() it into the buffer, rather than directly writing it
to a potentially-unaligned location in the buffer.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221106224841.279231-6-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Validate the inode and filename lengths in fast-commit journal records
so that a malicious fast-commit journal cannot cause a crash by having
invalid values for these. Also validate EXT4_FC_TAG_DEL_RANGE.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221106224841.279231-5-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When space at the end of fast-commit journal blocks is unused, make sure
to zero it out so that uninitialized memory is not leaked to disk.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221106224841.279231-4-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit a80f7fcf18 ("ext4: fixup ext4_fc_track_* functions' signature")
extended the scope of the transaction in ext4_unlink() too far, making
it include the call to ext4_find_entry(). However, ext4_find_entry()
can deadlock when called from within a transaction because it may need
to set up the directory's encryption key.
Fix this by restoring the transaction to its original scope.
Reported-by: syzbot+1a748d0007eeac3ab079@syzkaller.appspotmail.com
Fixes: a80f7fcf18 ("ext4: fixup ext4_fc_track_* functions' signature")
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221106224841.279231-3-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fast-commit of create, link, and unlink operations in encrypted
directories is completely broken because the unencrypted filenames are
being written to the fast-commit journal instead of the encrypted
filenames. These operations can't be replayed, as encryption keys
aren't present at journal replay time. It is also an information leak.
Until if/when we can get this working properly, make encrypted directory
operations ineligible for fast-commit.
Note that fast-commit operations on encrypted regular files continue to
be allowed, as they seem to work.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221106224841.279231-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I caught a issue as follows:
==================================================================
BUG: KASAN: use-after-free in __list_add_valid+0x28/0x1a0
Read of size 8 at addr ffff88814b13f378 by task mount/710
CPU: 1 PID: 710 Comm: mount Not tainted 6.1.0-rc3-next #370
Call Trace:
<TASK>
dump_stack_lvl+0x73/0x9f
print_report+0x25d/0x759
kasan_report+0xc0/0x120
__asan_load8+0x99/0x140
__list_add_valid+0x28/0x1a0
ext4_orphan_cleanup+0x564/0x9d0 [ext4]
__ext4_fill_super+0x48e2/0x5300 [ext4]
ext4_fill_super+0x19f/0x3a0 [ext4]
get_tree_bdev+0x27b/0x450
ext4_get_tree+0x19/0x30 [ext4]
vfs_get_tree+0x49/0x150
path_mount+0xaae/0x1350
do_mount+0xe2/0x110
__x64_sys_mount+0xf0/0x190
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_orphan_cleanup
--- loop1: assume last_orphan is 12 ---
list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan)
ext4_truncate --> return 0
ext4_inode_attach_jinode --> return -ENOMEM
iput(inode) --> free inode<12>
--- loop2: last_orphan is still 12 ---
list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan);
// use inode<12> and trigger UAF
To solve this issue, we need to propagate the return value of
ext4_inode_attach_jinode() appropriately.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221102080633.1630225-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Mounting a filesystem whose journal inode has the encrypt flag causes a
NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt'
mount option is used.
The problem is that when jbd2_journal_init_inode() calls bmap(), it
eventually finds its way into ext4_iomap_begin(), which calls
fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if
the inode is encrypted, then its encryption key must already be set up.
That's not the case here, since the journal inode is never "opened" like
a normal file would be. Hence the crash.
A reproducer is:
mkfs.ext4 -F /dev/vdb
debugfs -w /dev/vdb -R "set_inode_field <8> flags 0x80808"
mount /dev/vdb /mnt -o inlinecrypt
To fix this, make ext4 consider journal inodes with the encrypt flag to
be invalid. (Note, maybe other flags should be rejected on the journal
inode too. For now, this is just the minimal fix for the above issue.)
I've marked this as fixing the commit that introduced the call to
fscrypt_limit_io_blocks(), since that's what made an actual crash start
being possible. But this fix could be applied to any version of ext4
that supports the encrypt feature.
Reported-by: syzbot+ba9dac45bc76c490b7c3@syzkaller.appspotmail.com
Fixes: 38ea50daa7 ("ext4: support direct I/O with fscrypt using blk-crypto")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221102053312.189962-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in fs/ext4/ext4.h:591:2
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
ext4_init_fs+0x5a/0x277
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 9a4c801947 ("ext4: ensure Inode flags consistency are checked at build time")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221031055833.3966222-1-cuigaosheng1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
We got a issue as fllows:
==================================================================
kernel BUG at fs/ext4/extents_status.c:203!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty #349
RIP: 0010:ext4_es_end.isra.0+0x34/0x42
RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__es_tree_search.isra.0+0x6d/0xf5
ext4_es_cache_extent+0xfa/0x230
ext4_cache_extents+0xd2/0x110
ext4_find_extent+0x5d5/0x8c0
ext4_ext_map_blocks+0x9c/0x1d30
ext4_map_blocks+0x431/0xa50
ext4_mpage_readpages+0x48e/0xe40
ext4_readahead+0x47/0x50
read_pages+0x82/0x530
page_cache_ra_unbounded+0x199/0x2a0
do_page_cache_ra+0x47/0x70
page_cache_ra_order+0x242/0x400
ondemand_readahead+0x1e8/0x4b0
page_cache_sync_ra+0xf4/0x110
filemap_get_pages+0x131/0xb20
filemap_read+0xda/0x4b0
generic_file_read_iter+0x13a/0x250
ext4_file_read_iter+0x59/0x1d0
vfs_read+0x28f/0x460
ksys_read+0x73/0x160
__x64_sys_read+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
==================================================================
In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.
When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.
The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, allows a bad
inode to be returned, because the inode may not be initialized. This
mechanism can be used to bypass some checks and cause panic. To solve this
problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag
we'd be returning bad inode from ext4_iget(), otherwise we always return
the error code if the inode is bad inode.(suggested by Jan Kara)
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Before quota is enabled, a check on the preset quota inums in
ext4_super_block is added to prevent wrong quota inodes from being loaded.
In addition, when the quota fails to be enabled, the quota type and quota
inum are printed to facilitate fault locating.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
we might want to know why jbd2 thread using high io for detail,
split ext4_journal_start trace to ext4_journal_start_sb and
ext4_journal_start_inode, show ino and handle type when possible.
Signed-off-by: changfengnan <changfengnan@bytedance.com>
Link: https://lore.kernel.org/r/20221008120518.74870-1-changfengnan@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before the commit 461c3af045 ("ext4: Change handle_mount_opt() to use
fs_parameter") ext4 mount option journal_path did follow links in the
provided path.
Bring this behavior back by allowing to pass pathwalk flags to
fs_lookup_param().
Fixes: 461c3af045 ("ext4: Change handle_mount_opt() to use fs_parameter")
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20221004135803.32283-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Return value directly from ext4_group_extend_no_check()
instead of getting value from redundant variable err.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Link: https://lore.kernel.org/r/20220831160843.305836-1-cui.jinpeng2@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In do_writepages, if the value returned by ext4_writepages is "-ENOMEM"
and "wbc->sync_mode == WB_SYNC_ALL", retry until the condition is not met.
In __ext4_get_inode_loc, if the bh returned by sb_getblk is NULL,
the function returns -ENOMEM.
In __getblk_slow, if the return value of grow_buffers is less than 0,
the function returns NULL.
When the three processes are connected in series like the following stack,
an infinite loop may occur:
do_writepages <--- keep retrying
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_ext_map_blocks
ext4_ext_handle_unwritten_extents
ext4_ext_convert_to_initialized
ext4_split_extent
ext4_split_extent_at
__ext4_ext_dirty
__ext4_mark_inode_dirty
ext4_reserve_inode_write
ext4_get_inode_loc
__ext4_get_inode_loc <--- return -ENOMEM
sb_getblk
__getblk_gfp
__getblk_slow <--- return NULL
grow_buffers
grow_dev_page <--- return -ENXIO
ret = (block < end_block) ? 1 : -ENXIO;
In this issue, bg_inode_table_hi is overwritten as an incorrect value.
As a result, `block < end_block` cannot be met in grow_dev_page.
Therefore, __ext4_get_inode_loc always returns '-ENOMEM' and do_writepages
keeps retrying. As a result, the writeback process is in the D state due
to an infinite loop.
Add a check on inode table block in the __ext4_get_inode_loc function by
referring to ext4_read_inode_bitmap to avoid this infinite loop.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220817132701.3015912-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Patch series "Removing the try_to_release_page() wrapper", v3.
This patchset replaces the remaining calls of try_to_release_page() with
the folio equivalent: filemap_release_folio(). This allows us to remove
the wrapper.
This patch (of 4):
Convert move_extent_per_page() to use folios. This change removes 5 calls
to compound_head() and is in preparation for the removal of the
try_to_release_page() wrapper.
Link: https://lkml.kernel.org/r/20221118073055.55694-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20221118073055.55694-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix the following coccicheck warning:
fs/ext4/inline.c:183: WARNING opportunity for min().
fs/ext4/extents.c:2631: WARNING opportunity for max().
fs/ext4/extents.c:2632: WARNING opportunity for min().
fs/ext4/extents.c:5559: WARNING opportunity for max().
fs/ext4/super.c:6908: WARNING opportunity for min().
min()/max() and min_t() macro is defined in include/linux/minmax.h.
It avoids multiple evaluations of the arguments when non-constant and
performs strict type-checking.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220817025928.612851-1-13667453960@163.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_evict_inode(), if we evicting an inode in the 'no_delete' path,
it cannot be raced by another mark_inode_dirty(). If it happens,
someone else may accidentally dirty it without holding inode refcount
and probably cause use-after-free issues in the writeback procedure.
It's indiscoverable and hard to debug, so add an WARN_ON_ONCE() to
check and detect this issue in advance.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220629112647.4141034-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
As a step towards freeing the PG_error flag for other uses, change ext4
and f2fs to stop using PG_error to track verity errors. Instead, if a
verity error occurs, just mark the whole bio as failed. The coarser
granularity isn't really a problem since it isn't any worse than what
the block layer provides, and errors from a multi-page readahead aren't
reported to applications unless a single-page read fails too.
f2fs supports compression, which makes the f2fs changes a bit more
complicated than desired, but the basic premise still works.
Note: there are still a few uses of PageError in f2fs, but they are on
the write path, so they are unrelated and this patch doesn't touch them.
Reviewed-by: Chao Yu <chao@kernel.org>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221129070401.156114-1-ebiggers@kernel.org
When evicting an inode with default dioread_nolock, it could be raced by
the unwritten extents converting kworker after writeback some new
allocated dirty blocks. It convert unwritten extents to written, the
extents could be merged to upper level and free extent blocks, so it
could mark the inode dirty again even this inode has been marked
I_FREEING. But the inode->i_io_list check and warning in
ext4_evict_inode() missing this corner case. Fortunately,
ext4_evict_inode() will wait all extents converting finished before this
check, so it will not lead to inode use-after-free problem, every thing
is OK besides this warning. The WARN_ON_ONCE was originally designed
for finding inode use-after-free issues in advance, but if we add
current dioread_nolock case in, it will become not quite useful, so fix
this warning by just remove this check.
======
WARNING: CPU: 7 PID: 1092 at fs/ext4/inode.c:227
ext4_evict_inode+0x875/0xc60
...
RIP: 0010:ext4_evict_inode+0x875/0xc60
...
Call Trace:
<TASK>
evict+0x11c/0x2b0
iput+0x236/0x3a0
do_unlinkat+0x1b4/0x490
__x64_sys_unlinkat+0x4c/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fa933c1115b
======
rm kworker
ext4_end_io_end()
vfs_unlink()
ext4_unlink()
ext4_convert_unwritten_io_end_vec()
ext4_convert_unwritten_extents()
ext4_map_blocks()
ext4_ext_map_blocks()
ext4_ext_try_to_merge_up()
__mark_inode_dirty()
check !I_FREEING
locked_inode_to_wb_and_lock_list()
iput()
iput_final()
evict()
ext4_evict_inode()
truncate_inode_pages_final() //wait release io_end
inode_io_list_move_locked()
ext4_release_io_end()
trigger WARN_ON_ONCE()
Cc: stable@kernel.org
Fixes: ceff86fdda ("ext4: Avoid freeing inodes on dirty list")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220629112647.4141034-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
These cases were done with this Coccinelle:
@@
expression E;
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I > E);
+ I = get_random_u32_below(E + 1);
@@
expression E;
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I >= E);
+ I = get_random_u32_below(E);
@@
expression E;
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I < E);
+ I = get_random_u32_above(E - 1);
@@
expression E;
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I <= E);
+ I = get_random_u32_above(E);
@@
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (!I);
+ I = get_random_u32_above(0);
@@
identifier I;
@@
- do {
... when != I
- I = get_random_u32();
... when != I
- } while (I == 0);
+ I = get_random_u32_above(0);
@@
expression E;
@@
- E + 1 + get_random_u32_below(U32_MAX - E)
+ get_random_u32_above(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If the starting position of our insert range happens to be in the hole
between the two ext4_extent_idx, because the lblk of the ext4_extent in
the previous ext4_extent_idx is always less than the start, which leads
to the "extent" variable access across the boundary, the following UAF is
triggered:
==================================================================
BUG: KASAN: use-after-free in ext4_ext_shift_extents+0x257/0x790
Read of size 4 at addr ffff88819807a008 by task fallocate/8010
CPU: 3 PID: 8010 Comm: fallocate Tainted: G E 5.10.0+ #492
Call Trace:
dump_stack+0x7d/0xa3
print_address_description.constprop.0+0x1e/0x220
kasan_report.cold+0x67/0x7f
ext4_ext_shift_extents+0x257/0x790
ext4_insert_range+0x5b6/0x700
ext4_fallocate+0x39e/0x3d0
vfs_fallocate+0x26f/0x470
ksys_fallocate+0x3a/0x70
__x64_sys_fallocate+0x4f/0x60
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
==================================================================
For right shifts, we can divide them into the following situations：
1. When the first ee_block of ext4_extent_idx is greater than or equal to
start, make right shifts directly from the first ee_block.
1) If it is greater than start, we need to continue searching in the
previous ext4_extent_idx.
2) If it is equal to start, we can exit the loop (iterator=NULL).
2. When the first ee_block of ext4_extent_idx is less than start, then
traverse from the last extent to find the first extent whose ee_block
is less than start.
1) If extent is still the last extent after traversal, it means that
the last ee_block of ext4_extent_idx is less than start, that is,
start is located in the hole between idx and (idx+1), so we can
exit the loop directly (break) without right shifts.
2) Otherwise, make right shifts at the corresponding position of the
found extent, and then exit the loop (iterator=NULL).
Fixes: 331573febb ("ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20220922120434.1294789-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
serious of which was one which would cause online resizes to fail with
file systems with metadata checksums enabled. Also fix a warning
caused by the newly added fortify string checker, plus some bugs that
were found using fuzzed file systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmNnSCYACgkQ8vlZVpUN
gaNbBgf/QsOe7KCrr/X7mK7SFgbNY+jsmvagPV0SvAg9Uc0P3EkmXE0NcNcZOAUx
mgNBYNNS+QGKtdqHBy8p1kNgcbFAR/OJZ7rFD3XUnB/N+XKZSgimhNUx+IaEX7Dx
XidK5cPcKEZlbfuqxwkIfvaqC9v3XcpFpHicA/uDTPe4kZ8VhJQk294M5EuMA8lQ
wumDFsf/1sN4osJH7eHMZk/e3iFN8fwrpCgvwJ56zzW7UWSl8jJrq9kxHo43iijY
82DbRCdsVrdTPaD5gJSvcggLgMpUu+yoA1UbwiUlR1AtmaFfDg+rfIZs1ooyCdHl
QLQ3RlXdkfHTwAYBFFApzR55MhPakQ==
=zw2b
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of bugs, including some regressions, the most serious of
which was one which would cause online resizes to fail with file
systems with metadata checksums enabled.
Also fix a warning caused by the newly added fortify string checker,
plus some bugs that were found using fuzzed file systems"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
ext4: fix wrong return err in ext4_load_and_init_journal()
ext4: fix warning in 'ext4_da_release_space'
ext4: fix BUG_ON() when directory entry has invalid rec_len
ext4: update the backup superblock's at the end of the online resize
With the new fortify string system, rework the memcpy to avoid this
warning:
memcpy: detected field-spanning write (size 60) of single field "&raw_inode->i_generation" at fs/ext4/fast_commit.c:1551 (size 4)
Cc: stable@kernel.org
Fixes: 54d9469bc5 ("fortify: Add run-time WARN for cross-field memcpy()")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The return value is wrong in ext4_load_and_init_journal(). The local
variable 'err' need to be initialized before goto out. The original code
in __ext4_fill_super() is fine because it has two return values 'ret'
and 'err' and 'ret' is initialized as -EINVAL. After we factor out
ext4_load_and_init_journal(), this code is broken. So fix it by directly
returning -EINVAL in the error handler path.
Cc: stable@kernel.org
Fixes: 9c1dd22d74 ("ext4: factor out ext4_load_and_init_journal()")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221025040206.3134773-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The rec_len field in the directory entry has to be a multiple of 4. A
corrupted filesystem image can be used to hit a BUG() in
ext4_rec_len_to_disk(), called from make_indexed_dir().
------------[ cut here ]------------
kernel BUG at fs/ext4/ext4.h:2413!
...
RIP: 0010:make_indexed_dir+0x53f/0x5f0
...
Call Trace:
<TASK>
? add_dirent_to_buf+0x1b2/0x200
ext4_add_entry+0x36e/0x480
ext4_add_nondir+0x2b/0xc0
ext4_create+0x163/0x200
path_openat+0x635/0xe90
do_filp_open+0xb4/0x160
? __create_object.isra.0+0x1de/0x3b0
? _raw_spin_unlock+0x12/0x30
do_sys_openat2+0x91/0x150
__x64_sys_open+0x6c/0xa0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The fix simply adds a call to ext4_check_dir_entry() to validate the
directory entry, returning -EFSCORRUPTED if the entry is invalid.
CC: stable@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216540
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221012131330.32456-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fs/ext4/super.c:1744:19: warning: 'deprecated_msg' defined but not used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When expanding a file system using online resize, various fields in
the superblock (e.g., s_blocks_count, s_inodes_count, etc.) change.
To update the backup superblocks, the online resize uses the function
update_backups() in fs/ext4/resize.c. This function was not updating
the checksum field in the backup superblocks. This wasn't a big deal
previously, because e2fsck didn't care about the checksum field in the
backup superblock. (And indeed, update_backups() goes all the way
back to the ext3 days, well before we had support for metadata
checksums.)
However, there is an alternate, more general way of updating
superblock fields, ext4_update_primary_sb() in fs/ext4/ioctl.c. This
function does check the checksum of the backup superblock, and if it
doesn't match will mark the file system as corrupted. That was
clearly not the intent, so avoid to aborting the resize when a bad
superblock is found.
In addition, teach update_backups() to properly update the checksum in
the backup superblocks. We will eventually want to unify
updapte_backups() with the infrasture in ext4_update_primary_sb(), but
that's for another day.
Note: The problem has been around for a while; it just didn't really
matter until ext4_update_primary_sb() was added by commit bbc605cdb1
("ext4: implement support for get/set fs label"). And it became
trivially easy to reproduce after commit 827891a38a ("ext4: update
the s_overhead_clusters in the backup sb's when resizing") in v6.0.
Cc: stable@kernel.org # 5.17+
Fixes: bbc605cdb1 ("ext4: implement support for get/set fs label")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
The current inode operation for getting posix acls takes an inode
argument but various filesystems (e.g., 9p, cifs, overlayfs) need access
to the dentry. In contrast to the ->set_acl() inode operation we cannot
simply extend ->get_acl() to take a dentry argument. The ->get_acl()
inode operation is called from:
acl_permission_check()
-> check_acl()
-> get_acl()
which is part of generic_permission() which in turn is part of
inode_permission(). Both generic_permission() and inode_permission() are
called in the ->permission() handler of various filesystems (e.g.,
overlayfs). So simply passing a dentry argument to ->get_acl() would
amount to also having to pass a dentry argument to ->permission(). We
should avoid this unnecessary change.
So instead of extending the existing inode operation rename it from
->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that
passes a dentry argument and which filesystems that need access to the
dentry can implement instead of ->get_inode_acl(). Filesystems like cifs
which allow setting and getting posix acls but not using them for
permission checking during lookup can simply not implement
->get_inode_acl().
This is intended to be a non-functional change.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Suggested-by/Inspired-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode
operation. But since ->set_acl() is required in order to use the generic
posix acl xattr handlers filesystems that do not implement this inode
operation cannot use the handler and need to implement their own
dedicated posix acl handlers.
Update the ->set_acl() inode method to take a dentry argument. This
allows all filesystems to rely on ->set_acl().
As far as I can tell all codepaths can be switched to rely on the dentry
instead of just the inode. Note that the original motivation for passing
the dentry separate from the inode instead of just the dentry in the
xattr handlers was because of security modules that call
security_d_instantiate(). This hook is called during
d_instantiate_new(), d_add(), __d_instantiate_anon(), and
d_splice_alias() to initialize the inode's security context and possibly
to set security.* xattrs. Since this only affects security.* xattrs this
is completely irrelevant for posix acls.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
refcounting errors in ZONE_DEVICE pages.
- Peter Xu fixes some userfaultfd test harness instability.
- Various other patches in MM, mainly fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0j6igAKCRDdBJ7gKXxA
jnGxAP99bV39ZtOsoY4OHdZlWU16BUjKuf/cb3bZlC2G849vEwD+OKlij86SG20j
MGJQ6TfULJ8f1dnQDd6wvDfl3FMl7Qc=
=tbdp
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- fix a race which causes page refcounting errors in ZONE_DEVICE pages
(Alistair Popple)
- fix userfaultfd test harness instability (Peter Xu)
- various other patches in MM, mainly fixes
* tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits)
highmem: fix kmap_to_page() for kmap_local_page() addresses
mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page
mm/selftest: uffd: explain the write missing fault check
mm/hugetlb: use hugetlb_pte_stable in migration race check
mm/hugetlb: fix race condition of uffd missing/minor handling
zram: always expose rw_page
LoongArch: update local TLB if PTE entry exists
mm: use update_mmu_tlb() on the second thread
kasan: fix array-bounds warnings in tests
hmm-tests: add test for migrate_device_range()
nouveau/dmem: evict device private memory during release
nouveau/dmem: refactor nouveau_dmem_fault_copy_one()
mm/migrate_device.c: add migrate_device_range()
mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()
mm/memremap.c: take a pgmap reference on page allocation
mm: free device private pages have zero refcount
mm/memory.c: fix race when faulting a device private page
mm/damon: use damon_sz_region() in appropriate place
mm/damon: move sz_damon_region to damon_sz_region
lib/test_meminit: add checks for the allocation functions
...
The recent change of page_cache_ra_unbounded() arguments was buggy in the
two callers, causing us to readahead the wrong pages. Move the definition
of ractl down to after the index is set correctly. This affected
performance on configurations that use fs-verity.
Link: https://lkml.kernel.org/r/20221012193419.1453558-1-willy@infradead.org
Fixes: 73bb49da50 ("mm/readahead: make page_cache_ra_unbounded take a readahead_control")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Jintao Yin <nicememory@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done by hand, covering things that coccinelle could not do on its own.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext2, ext4, and sbitmap
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY0DP2AAKCRBZ7Krx/gZQ
6/+qAQCEGQWpcC5MB17zylaX7gqzhgAsDrwtpevlno3aIv/1pQD/YWr/E8tf7WTW
ERXRXMRx1cAzBJhUhVgIY+3ANfU2Rg4=
=cko4
-----END PGP SIGNATURE-----
Merge tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs tmpfile updates from Al Viro:
"Miklos' ->tmpfile() signature change; pass an unopened struct file to
it, let it open the damn thing. Allows to add tmpfile support to FUSE"
* tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: implement ->tmpfile()
vfs: open inside ->tmpfile()
vfs: move open right after ->tmpfile()
vfs: make vfs_tmpfile() static
ovl: use vfs_tmpfile_open() helper
cachefiles: use vfs_tmpfile_open() helper
cachefiles: only pass inode to *mark_inode_inuse() helpers
cachefiles: tmpfile error handling cleanup
hugetlbfs: cleanup mknod and tmpfile
vfs: add vfs_tmpfile_open() helper
- submit_bh() can never return an error, so change it to return void,
and remove the unused checks from its callers
- fix I_DIRTY_TIME handling so it will be set even if the inode
already has I_DIRTY_INODE
Performance:
- Always enable i_version counter (as btrfs and xfs already do).
Remove some uneeded i_version bumps to avoid unnecessary nfs cache
invalidations.
- Wake up journal waters in FIFO order, to avoid some journal users
from not getting a journal handle for an unfairly long time.
- In ext4_write_begin() allocate any necessary buffer heads before
starting the journal handle.
- Don't try to prefetch the block allocation bitmaps for a read-only
file system.
Bug Fixes:
- Fix a number of fast commit bugs, including resources leaks and out
of bound references in various error handling paths and/or if the fast
commit log is corrupted.
- Avoid stopping the online resize early when expanding a file system
which is less than 16TiB to a size greater than 16TiB.
- Fix apparent metadata corruption caused by a race with a metadata
buffer head getting migrated while it was trying to be read.
- Mark the lazy initialization thread freezable to prevent suspend
failures.
- Other miscellaneous bug fixes.
Cleanups:
- Break up the incredibly long ext4_full_super() function by
refactoring to move code into more understandable, smaller
functions.
- Remove the deprecated (and ignored) noacl and nouser_attr mount
option.
- Factor out some common code in fast commit handling.
- Other miscellaneous cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmM8/2gACgkQ8vlZVpUN
gaPohAf9GDMUq3QIYoWLlJ+ygJhL0xQGPfC6sypMjHaUO5GSo+1+sAMU3JBftxUS
LrgTtmzSKzwp9PyOHNs+mswUzhLZivKVCLMmOznQUZS228GSVKProhN1LPL4UP2Q
Ks8i1M5XTWS+mtJ5J5Mw6jRHxcjfT6ynyJKPnIWKTwXyeru1WSJ2PWqtWQD4EZkE
lImECy0jX/zlK02s0jDYbNIbXIvI/TTYi7wT8o1ouLCAXMDv5gJRc5TXCVtX8i59
/Pl9rGG/+IWTnYT/aQ668S2g0Cz6Wyv2EkmiPUW0Y8NoLaaouBYZoC2hDujiv+l1
ucEI14TEQ+DojJTdChrtwKqgZfqDOw==
=xoLC
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The first two changes involve files outside of fs/ext4:
- submit_bh() can never return an error, so change it to return void,
and remove the unused checks from its callers
- fix I_DIRTY_TIME handling so it will be set even if the inode
already has I_DIRTY_INODE
Performance:
- Always enable i_version counter (as btrfs and xfs already do).
Remove some uneeded i_version bumps to avoid unnecessary nfs cache
invalidations
- Wake up journal waiters in FIFO order, to avoid some journal users
from not getting a journal handle for an unfairly long time
- In ext4_write_begin() allocate any necessary buffer heads before
starting the journal handle
- Don't try to prefetch the block allocation bitmaps for a read-only
file system
Bug Fixes:
- Fix a number of fast commit bugs, including resources leaks and out
of bound references in various error handling paths and/or if the
fast commit log is corrupted
- Avoid stopping the online resize early when expanding a file system
which is less than 16TiB to a size greater than 16TiB
- Fix apparent metadata corruption caused by a race with a metadata
buffer head getting migrated while it was trying to be read
- Mark the lazy initialization thread freezable to prevent suspend
failures
- Other miscellaneous bug fixes
Cleanups:
- Break up the incredibly long ext4_full_super() function by
refactoring to move code into more understandable, smaller
functions
- Remove the deprecated (and ignored) noacl and nouser_attr mount
option
- Factor out some common code in fast commit handling
- Other miscellaneous cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (53 commits)
ext4: fix potential out of bound read in ext4_fc_replay_scan()
ext4: factor out ext4_fc_get_tl()
ext4: introduce EXT4_FC_TAG_BASE_LEN helper
ext4: factor out ext4_free_ext_path()
ext4: remove unnecessary drop path references in mext_check_coverage()
ext4: update 'state->fc_regions_size' after successful memory allocation
ext4: fix potential memory leak in ext4_fc_record_regions()
ext4: fix potential memory leak in ext4_fc_record_modified_inode()
ext4: remove redundant checking in ext4_ioctl_checkpoint
jbd2: add miss release buffer head in fc_do_one_pass()
ext4: move DIOREAD_NOLOCK setting to ext4_set_def_opts()
ext4: remove useless local variable 'blocksize'
ext4: unify the ext4 super block loading operation
ext4: factor out ext4_journal_data_mode_check()
ext4: factor out ext4_load_and_init_journal()
ext4: factor out ext4_group_desc_init() and ext4_group_desc_free()
ext4: factor out ext4_geometry_check()
ext4: factor out ext4_check_feature_compatibility()
ext4: factor out ext4_init_metadata_csum()
ext4: factor out ext4_encoding_init()
...
Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment restrictions.
Specifically, STATX_DIOALIGN works on block devices, and on regular
files when their containing filesystem has implemented support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can be
affected by various filesystem features such as multi-device support,
data journalling, inline data, encryption, verity, compression,
checkpoint disabling, log-structured mode, etc. Further complicating
things, Linux v6.0 relaxed the traditional rule of DIO needing to be
aligned to the block device's logical block size; now user buffers (but
not file offsets) only need to be aligned to the DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page update
https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpV2xQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKwF1AQDetPX5hyuq0/mwikOywLTTJsoHgGY5
euO+dISqjH/InwD9HAQqfPRkdM1j4ml82BjjkAfrhzZXOOWPKJm0zOhMIQg=
=0Oav
-----END PGP SIGNATURE-----
Merge tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull STATX_DIOALIGN support from Eric Biggers:
"Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment
restrictions. Specifically, STATX_DIOALIGN works on block devices, and
on regular files when their containing filesystem has implemented
support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can
be affected by various filesystem features such as multi-device
support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode, etc.
Further complicating things, Linux v6.0 relaxed the traditional rule
of DIO needing to be aligned to the block device's logical block size;
now user buffers (but not file offsets) only need to be aligned to the
DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page
update[1]"
Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org [1]
* tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
xfs: support STATX_DIOALIGN
f2fs: support STATX_DIOALIGN
f2fs: simplify f2fs_force_buffered_io()
f2fs: move f2fs_force_buffered_io() into file.c
ext4: support STATX_DIOALIGN
fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN
vfs: support STATX_DIOALIGN on block devices
statx: add direct I/O alignment information
This release contains some implementation changes, but no new features:
- Rework the implementation of the fscrypt filesystem-level keyring to
not be as tightly coupled to the keyrings subsystem. This resolves
several issues.
- Eliminate most direct uses of struct request_queue from fs/crypto/,
since struct request_queue is considered to be a block layer
implementation detail.
- Stop using the PG_error flag to track decryption failures. This is a
prerequisite for freeing up PG_error for other uses.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYzpMMRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKxYbAP0VrWjlqonO75gYkIxwX0aTxajoKC3m
awUDAC/feQ910gD6A4WbJivanLngJKgcxfbhN5paalZJEGNOBBrOUB1WLgs=
=CxSh
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release contains some implementation changes, but no new
features:
- Rework the implementation of the fscrypt filesystem-level keyring
to not be as tightly coupled to the keyrings subsystem. This
resolves several issues.
- Eliminate most direct uses of struct request_queue from fs/crypto/,
since struct request_queue is considered to be a block layer
implementation detail.
- Stop using the PG_error flag to track decryption failures. This is
a prerequisite for freeing up PG_error for other uses"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: work on block_devices instead of request_queues
fscrypt: stop holding extra request_queue references
fscrypt: stop using keyrings subsystem for fscrypt_master_key
fscrypt: stop using PG_error to track error status
fscrypt: remove fscrypt_set_test_dummy_encryption()
For scan loop must ensure that at least EXT4_FC_TAG_BASE_LEN space. If remain
space less than EXT4_FC_TAG_BASE_LEN which will lead to out of bound read
when mounting corrupt file system image.
ADD_RANGE/HEAD/TAIL is needed to add extra check when do journal scan, as this
three tags will read data during scan, tag length couldn't less than data length
which will read.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20220924075233.2315259-4-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_free_ext_path() to free extent path. As after previous patch
'ext4_ext_drop_refs()' is only used in 'extents.c', so make it static.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220924021211.3831551-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
According to Jan Kara's suggestion:
"The use in mext_check_coverage() can be actually removed
- get_ext_path() -> ext4_find_extent() takes care of dropping the references."
So remove unnecessary call ext4_ext_drop_refs() in mext_check_coverage().
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220924021211.3831551-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To avoid to 'state->fc_regions_size' mismatch with 'state->fc_regions'
when fail to reallocate 'fc_reqions',only update 'state->fc_regions_size'
after 'state->fc_regions' is allocated successfully.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-4-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As krealloc may return NULL, in this case 'state->fc_regions' may not be
freed by krealloc, but 'state->fc_regions' already set NULL. Then will
lead to 'state->fc_regions' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As krealloc may return NULL, in this case 'state->fc_modified_inodes'
may not be freed by krealloc, but 'state->fc_modified_inodes' already
set NULL. Then will lead to 'state->fc_modified_inodes' memory leak.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220921064040.3693255-2-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now since all preparations is done, we can move the DIOREAD_NOLOCK
setting to ext4_set_def_opts().
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-17-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since sb->s_blocksize is now initialized at the very beginning, the
local variable 'blocksize' in __ext4_fill_super() is not needed now.
Remove it and use sb->s_blocksize instead.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-16-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now we load the super block from the disk in two steps. First we load
the super block with the default block size(EXT4_MIN_BLOCK_SIZE). Second
we load the super block with the real block size. The second step is a
little far from the first step. This patch move these two steps together
in a new function.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916141527.1012715-15-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_journal_data_mode_check(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara<jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-14-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch group the journal load and initialize code together and
factor out ext4_load_and_init_journal(). This patch also removes the
lable 'no_journal' which is not needed after refactor.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-13-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_group_desc_init() and ext4_group_desc_free(). No
functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-12-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_geometry_check(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-11-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_check_feature_compatibility(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-10-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_init_metadata_csum(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-9-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_inode_info_init(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-7-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_fast_commit_init(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-6-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_handle_clustersize(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-5-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_set_def_opts(). No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-4-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'cantfind_ext4' error handler is just a error msg print and then
goto failed_mount. This two level goto makes the code complex and not
easy to read. The only benefit is that is saves a little bit code.
However some branches can merge and some branches dot not even need it.
So do some refactor and remove it.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-3-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before these two branches neither loaded the journal nor created the
xattr cache. So the right label to goto is 'failed_mount3a'. Although
this did not cause any issues because the error handler validated if the
pointer is null. However this still made me confused when reading
the code. So it's still worth to modify to goto the right label.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-2-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If fastcommit is already disabled, there isn't need to mark inode ineligible.
So move 'ext4_fc_disabled()' judgement bofore 'ext4_should_journal_data(inode)'
judgement which can avoid to do meaningless judgement.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220916083836.388347-3-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In 'ext4_fc_write_inode' function first call 'ext4_get_inode_loc' get 'iloc',
after use it miss release 'iloc.bh'.
So just release 'iloc.bh' before 'ext4_fc_write_inode' return.
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220914100859.1415196-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Following process may lead to fs corruption:
1. ext4_create(dir/foo)
ext4_add_nondir
ext4_add_entry
ext4_dx_add_entry
a. add_dirent_to_buf
ext4_mark_inode_dirty
ext4_handle_dirty_metadata // dir inode bh is recorded into journal
b. ext4_append // dx_get_count(entries) == dx_get_limit(entries)
ext4_bread(EXT4_GET_BLOCKS_CREATE)
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
dquot_alloc_block
dquot_alloc_space_nodirty
inode_add_bytes // update dir's i_blocks
ext4_ext_insert_extent
ext4_ext_dirty // record extent bh into journal
ext4_handle_dirty_metadata(bh)
// record new block into journal
inode->i_size += inode->i_sb->s_blocksize // new size(in mem)
c. ext4_handle_dirty_dx_node(bh2)
// record dir's new block(dx_node) into journal
d. ext4_handle_dirty_dx_node((frame - 1)->bh)
e. ext4_handle_dirty_dx_node(frame->bh)
f. do_split // ret err!
g. add_dirent_to_buf
ext4_mark_inode_dirty(dir) // update raw_inode on disk(skipped)
2. fsck -a /dev/sdb
drop last block(dx_node) which beyonds dir's i_size.
/dev/sdb: recovering journal
/dev/sdb contains a file system with errors, check forced.
/dev/sdb: Inode 12, end of extent exceeds allowed value
(logical block 128, physical block 3938, len 1)
3. fsck -fn /dev/sdb
dx_node->entry[i].blk > dir->i_size
Pass 2: Checking directory structure
Problem in HTREE directory inode 12 (/dir): bad block number 128.
Clear HTree index? no
Problem in HTREE directory inode 12: block #3 has invalid depth (2)
Problem in HTREE directory inode 12: block #3 has bad max hash
Problem in HTREE directory inode 12: block #3 not referenced
Fix it by marking inode dirty directly inside ext4_append().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216466
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220911045204.516460-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_inline_data_fiemap() has been removed since
commit d3b6f23f71 ("ext4: move ext4_fiemap to use iomap framework"),
so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220909065307.1155201-1-cuigaosheng1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 currently updates the i_version counter when the atime is updated
during a read. This is less than ideal as it can cause unnecessary cache
invalidations with NFSv4 and unnecessary remeasurements for IMA.
The increment in ext4_mark_iloc_dirty is also problematic since it can
corrupt the i_version counter for ea_inodes. We aren't bumping the file
times in ext4_mark_iloc_dirty, so changing the i_version there seems
wrong, and is the cause of both problems.
Remove that callsite and add increments to the setattr, setxattr and
ioctl codepaths, at the same times that we update the ctime. The
i_version bump that already happens during timestamp updates should take
care of the rest.
In ext4_move_extents, increment the i_version on both inodes, and also
add in missing ctime updates.
[ Some minor updates since we've already enabled the i_version counter
unconditionally already via another patch series. -- TYT ]
Cc: stable@kernel.org
Cc: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20220908172448.208585-3-jlayton@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.
One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.
Cc: stable@kernel.org
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220903012429.22555-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Recently we notice that ext4 filesystem would occasionally fail to read
metadata from disk and report error message, but the disk and block
layer looks fine. After analyse, we lockon commit 88dbcbb3a4
("blkdev: avoid migration stalls for blkdev pages"). It provide a
migration method for the bdev, we could move page that has buffers
without extra users now, but it lock the buffers on the page, which
breaks the fragile metadata read operation on ext4 filesystem,
ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the
assumption of that locked buffer means it is under IO. So it just
trylock the buffer and skip submit IO if it lock failed, after
wait_on_buffer() we conclude IO error because the buffer is not
uptodate.
This issue could be easily reproduced by add some delay just after
buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do
fsstress on ext4 filesystem.
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193:
comm fsstress: reading directory lblock 0
EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334:
comm fsstress: reading directory lblock 0
Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock
the buffer and submit IO if it's not uptodate, and also leave over
readahead helper.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The original i_version implementation was pretty expensive, requiring a
log flush on every change. Because of this, it was gated behind a mount
option (implemented via the MS_I_VERSION mountoption flag).
Commit ae5e165d85 (fs: new API for handling inode->i_version) made the
i_version flag much less expensive, so there is no longer a performance
penalty from enabling it. xfs and btrfs already enable it
unconditionally when the on-disk format can support it.
Have ext4 ignore the SB_I_VERSION flag, and just enable it
unconditionally. While we're in here, mark the i_version mount
option Opt_removed.
[ Removed leftover bits of i_version from ext4_apply_options() since it
now can't ever be set in ctx->mask_s_flags -- lczerner ]
Cc: stable@kernel.org
Cc: Dave Chinner <david@fromorbit.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220824160349.39664-3-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ea_inodes are using i_version for storing part of the reference count so
we really need to leave it alone.
The problem can be reproduced by xfstest ext4/026 when iversion is
enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL
inodes in ext4_mark_iloc_dirty().
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220824160349.39664-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The check in __ext4_read_dirblock() for block being outside of directory
size was wrong because it compared block number against directory size
in bytes. Fix it.
Fixes: 65f8ea4cd5 ("ext4: check if directory block is within i_size")
CVE: CVE-2022-1184
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220822114832.1482-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.
Cc: stable@kernel.org
Signed-off-by: Lalith Rajendran <lalithkraj@google.com>
Link: https://lore.kernel.org/r/20220818214049.1519544-1-lalithkraj@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On a read-only filesystem, we won't invoke the block allocator, so we
don't need to prefetch the block bitmaps.
This avoids starting and running the ext4lazyinit thread at all on a
system with no read-write ext4 filesystems (for instance, a container VM
with read-only filesystems underneath an overlayfs).
Fixes: 21175ca434 ("ext4: make prefetch_block_bitmaps default")
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/48b41da1498fcac3287e2e06b660680646c1c050.1659323972.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
kernel BUG at fs/ext4/inode.c:2721!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 359 Comm: repro Not tainted 5.19.0-rc8-00001-g31ba1e3b8305-dirty #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:ext4_writepages+0x363d/0x3660
RSP: 0018:ffffc90000ccf260 EFLAGS: 00010293
RAX: ffffffff81e1abcd RBX: 0000008000000000 RCX: ffff88810842a180
RDX: 0000000000000000 RSI: 0000008000000000 RDI: 0000000000000000
RBP: ffffc90000ccf650 R08: ffffffff81e17d58 R09: ffffed10222c680b
R10: dfffe910222c680c R11: 1ffff110222c680a R12: ffff888111634128
R13: ffffc90000ccf880 R14: 0000008410000000 R15: 0000000000000001
FS: 00007f72635d2640(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565243379180 CR3: 000000010aa74000 CR4: 0000000000150eb0
Call Trace:
<TASK>
do_writepages+0x397/0x640
filemap_fdatawrite_wbc+0x151/0x1b0
file_write_and_wait_range+0x1c9/0x2b0
ext4_sync_file+0x19e/0xa00
vfs_fsync_range+0x17b/0x190
ext4_buffered_write_iter+0x488/0x530
ext4_file_write_iter+0x449/0x1b90
vfs_write+0xbcd/0xf40
ksys_write+0x198/0x2c0
__x64_sys_write+0x7b/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fix the problem by clearing EXT4_STATE_MAY_INLINE_DATA when we are doing
direct IO write to a file.
Cc: stable@kernel.org
Reported-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reported-by: syzbot+bd13648a53ed6933ca49@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=a1e89d09bbbcbd5c4cb45db230ee28c822953984
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Tadeusz Struk<tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220727155753.13969-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Modify the error returns for two file types that can't be defragged to
more clearly communicate those restrictions to a caller. When the
defrag code is applied to swap files, return -ETXTBSY, and when applied
to quota files, return -EOPNOTSUPP. Move an extent tree search whose
results are only occasionally required to the site always requiring them
for improved efficiency. Address a few typos.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220722163910.268564-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When expanding a file system from (16TiB-2MiB) to 18TiB, the operation
exits early which leads to result inconsistency between resize2fs and
Ext4 kernel driver.
=== before ===
○ → resize2fs /dev/mapper/thin
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/mapper/thin is mounted on /mnt/test; on-line resizing required
old_desc_blocks = 2048, new_desc_blocks = 2304
The filesystem on /dev/mapper/thin is now 4831837696 (4k) blocks long.
[ 865.186308] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 912.091502] dm-4: detected capacity change from 34359738368 to 38654705664
[ 970.030550] dm-5: detected capacity change from 34359734272 to 38654701568
[ 1000.012751] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 1000.012878] EXT4-fs (dm-5): resized filesystem to 4294967296
=== after ===
[ 129.104898] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 143.773630] dm-4: detected capacity change from 34359738368 to 38654705664
[ 198.203246] dm-5: detected capacity change from 34359734272 to 38654701568
[ 207.918603] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 207.918754] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 207.918758] EXT4-fs (dm-5): Converting file system to meta_bg
[ 207.918790] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 221.454050] EXT4-fs (dm-5): resized to 4658298880 blocks
[ 227.634613] EXT4-fs (dm-5): resized filesystem to 4831837696
Signed-off-by: Jerry Lee <jerrylee@qnap.com>
Link: https://lore.kernel.org/r/PU1PR04MB22635E739BD21150DC182AC6A18C9@PU1PR04MB2263.apcprd04.prod.outlook.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Variable 'grp' may be left uninitialized if there's no group with
suitable average fragment size (or larger). Fix the problem by
initializing it earlier.
Link: https://lore.kernel.org/r/20220922091542.pkhedytey7wzp5fi@quack3
Fixes: 83e80a6e35 ("ext4: use buckets for cr 1 block scan instead of rbtree")
Cc: stable@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is in preparation for adding tmpfile support to fuse, which requires
that the tmpfile creation and opening are done as a single operation.
Replace the 'struct dentry *' argument of i_op->tmpfile with
'struct file *'.
Call finish_open_simple() as the last thing in ->tmpfile() instances (may
be omitted in the error case).
Change d_tmpfile() argument to 'struct file *' as well to make callers more
readable.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch avoids threads live-locking for hours when a large number
threads are competing over the last few free extents as they blocks
getting added and removed from preallocation pools. From our bug
reporter:
A reliable way for triggering this has multiple writers
continuously write() to files when the filesystem is full, while
small amounts of space are freed (e.g. by truncating a large file
-1MiB at a time). In the local filesystem, this can be done by
simply not checking the return code of write (0) and/or the error
(ENOSPACE) that is set. Over NFS with an async mount, even clients
with proper error checking will behave this way since the linux NFS
client implementation will not propagate the server errors [the
write syscalls immediately return success] until the file handle is
closed. This leads to a situation where NFS clients send a
continuous stream of WRITE rpcs which result in ERRNOSPACE -- but
since the client isn't seeing this, the stream of writes continues
at maximum network speed.
When some space does appear, multiple writers will all attempt to
claim it for their current write. For NFS, we may see dozens to
hundreds of threads that do this.
The real-world scenario of this is database backup tooling (in
particular, github.com/mdkent/percona-xtrabackup) which may write
large files (>1TiB) to NFS for safe keeping. Some temporary files
are written, rewound, and read back -- all before closing the file
handle (the temp file is actually unlinked, to trigger automatic
deletion on close/crash.) An application like this operating on an
async NFS mount will not see an error code until TiB have been
written/read.
The lockup was observed when running this database backup on large
filesystems (64 TiB in this case) with a high number of block
groups and no free space. Fragmentation is generally not a factor
in this filesystem (~thousands of large files, mostly contiguous
except for the parts written while the filesystem is at capacity.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Using rbtree for sorting groups by average fragment size is relatively
expensive (needs rbtree update on every block freeing or allocation) and
leads to wide spreading of allocations because selection of block group
is very sentitive both to changes in free space and amount of blocks
allocated. Furthermore selecting group with the best matching average
fragment size is not necessary anyway, even more so because the
variability of fragment sizes within a group is likely large so average
is not telling much. We just need a group with large enough average
fragment size so that we have high probability of finding large enough
free extent and we don't want average fragment size to be too big so
that we are likely to find free extent only somewhat larger than what we
need.
So instead of maintaing rbtree of groups sorted by fragment size keep
bins (lists) or groups where average fragment size is in the interval
[2^i, 2^(i+1)). This structure requires less updates on block allocation
/ freeing, generally avoids chaotic spreading of allocations into block
groups, and still is able to quickly (even faster that the rbtree)
provide a block group which is likely to have a suitably sized free
space extent.
This patch reduces number of block groups used when untarring archive
with medium sized files (size somewhat above 64k which is default
mballoc limit for avoiding locality group preallocation) to about half
and thus improves write speeds for eMMC flash significantly.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Curently we don't use any preallocation when a file is already closed
when allocating blocks (from writeback code when converting delayed
allocation). However for small files, using locality group preallocation
is actually desirable as that is not specific to a particular file.
Rather it is a method to pack small files together to reduce
fragmentation and for that the fact the file is closed is actually even
stronger hint the file would benefit from packing. So change the logic
to allow locality group preallocation in this case.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently the Orlov inode allocator searches for free inodes for a
directory only in flex block groups with at most inodes_per_group/16
more directory inodes than average per flex block group. However with
growing size of flex block group this becomes unnecessarily strict.
Scale allowed difference from average directory count per flex block
group with flex block group size as we do with other metrics.
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mb_set_largest_free_order() updates lists containing groups with largest
chunk of free space of given order. The way it updates it leads to
always moving the group to the tail of the list. Thus allocations
looking for free space of given order effectively end up cycling through
all groups (and due to initialization in last to first order). This
spreads allocations among block groups which reduces performance for
rotating disks or low-end flash media. Change
mb_set_largest_free_order() to only update lists if the order of the
largest free chunk in the group changed.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
One of the side-effects of mb_optimize_scan was that the optimized
functions to select next group to try were called even before we tried
the goal group. As a result we no longer allocate files close to
corresponding inodes as well as we don't try to expand currently
allocated extent in the same group. This results in reaim regression
with workfile.disk workload of upto 8% with many clients on my test
machine:
baseline mb_optimize_scan
Hmean disk-1 2114.16 ( 0.00%) 2099.37 ( -0.70%)
Hmean disk-41 87794.43 ( 0.00%) 83787.47 * -4.56%*
Hmean disk-81 148170.73 ( 0.00%) 135527.05 * -8.53%*
Hmean disk-121 177506.11 ( 0.00%) 166284.93 * -6.32%*
Hmean disk-161 220951.51 ( 0.00%) 207563.39 * -6.06%*
Hmean disk-201 208722.74 ( 0.00%) 203235.59 ( -2.63%)
Hmean disk-241 222051.60 ( 0.00%) 217705.51 ( -1.96%)
Hmean disk-281 252244.17 ( 0.00%) 241132.72 * -4.41%*
Hmean disk-321 255844.84 ( 0.00%) 245412.84 * -4.08%*
Also this is causing huge regression (time increased by a factor of 5 or
so) when untarring archive with lots of small files on some eMMC storage
cards.
Fix the problem by making sure we try goal group first.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/20220727105123.ckwrhbilzrxqpt24@quack3/
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add support for STATX_DIOALIGN to ext4, so that direct I/O alignment
restrictions are exposed to userspace in a generic way.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-5-ebiggers@kernel.org
To prepare for STATX_DIOALIGN support, make two changes to
fscrypt_dio_supported().
First, remove the filesystem-block-alignment check and make the
filesystems handle it instead. It previously made sense to have it in
fs/crypto/; however, to support STATX_DIOALIGN the alignment restriction
would have to be returned to filesystems. It ends up being simpler if
filesystems handle this part themselves, especially for f2fs which only
allows fs-block-aligned DIO in the first place.
Second, make fscrypt_dio_supported() work on inodes whose encryption key
hasn't been set up yet, by making it set up the key if needed. This is
required for statx(), since statx() doesn't require a file descriptor.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-4-ebiggers@kernel.org
As a step towards freeing the PG_error flag for other uses, change ext4
and f2fs to stop using PG_error to track decryption errors. Instead, if
a decryption error occurs, just mark the whole bio as failed. The
coarser granularity isn't really a problem since it isn't any worse than
what the block layer provides, and errors from a multi-page readahead
aren't reported to applications unless a single-page read fails too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org> # for f2fs part
Link: https://lore.kernel.org/r/20220815235052.86545-2-ebiggers@kernel.org
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
superblock and improved the performance of the online resizing of file
systems with bigalloc enabled. Fixed a lot of bugs, in particular for
the inline data feature, potential races when creating and deleting
inodes with shared extended attribute blocks, and the handling
directory blocks which are corrupted.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmLrRpEACgkQ8vlZVpUN
gaN2OAf/a2lxhZ6DvkTfWjni0BG6i2ajd11lT93N+we0wWk9f0VdNR2JUdTum0HL
UtwP48km+FuqkbDrODlbSky5V+IZhd90ihLyPbPKSU/52c7d6IxNOCz2Fxq981j2
Ik6QgdegvCaUDHmluJfYYcS5Pa97HXtSb6VVi1RAvHHFbYDSChObs76ZQWBmhsSh
Mo84mFGS7BDIVNVkg4PBMx4b3iFvKfE1AUdfA5dhB4GXHgDA+77GByw+RjdQ6Dh/
W0l5AVAXbK7BYSVX6Cg41WUMYOBu58Hrh/CHL1DWv3khvjgxLqM7ERAFOISVI3Ax
vCXPXfjpbTFElUQuOw4m33vixaFU+A==
=xTsM
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Add new ioctls to set and get the file system UUID in the ext4
superblock and improved the performance of the online resizing of file
systems with bigalloc enabled.
Fixed a lot of bugs, in particular for the inline data feature,
potential races when creating and deleting inodes with shared extended
attribute blocks, and the handling of directory blocks which are
corrupted"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (37 commits)
ext4: add ioctls to get/set the ext4 superblock uuid
ext4: avoid resizing to a partial cluster size
ext4: reduce computation of overhead during resize
jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted
ext4: block range must be validated before use in ext4_mb_clear_bb()
mbcache: automatically delete entries from cache on freeing
mbcache: Remove mb_cache_entry_delete()
ext2: avoid deleting xattr block that is being reused
ext2: unindent codeblock in ext2_xattr_set()
ext2: factor our freeing of xattr block reference
ext4: fix race when reusing xattr blocks
ext4: unindent codeblock in ext4_xattr_block_set()
ext4: remove EA inode entry from mbcache on inode eviction
mbcache: add functions to delete entry if unused
mbcache: don't reclaim used entries
ext4: make sure ext4_append() always allocates new block
ext4: check if directory block is within i_size
ext4: reflect mb_optimize_scan value in options file
ext4: avoid remove directory when directory is corrupted
ext4: aligned '*' in comments
...
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into their
own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmLpViQACgkQDpNsjXcp
gj5pBgf/f3+K7Hi3qw7aYQCYJQ7IA/bLyE/DLWI59kuiao6wDSve40B9YH9X++Ha
mRLp55bkQS+bwS2xa4jlqrIDJzAfNoWlXaXZHUXGL1C/52ChTF6jaH2cvO9PVlDS
7fLv1hy2LwiIdzpKJkUW7T+kcQGj3QLKqtQ4x8zD0LGMg055yvt/qndHSUi41nWT
/58+6W8Sk4vvRgkpeChFzF1lGLy00+FGT8y5V2kM9uRliFQ7XPCwqB2a3e5jbW6z
C1NXQmRnopCrnOT1TFIhK3DyX6MDIWV5qcikNAmCKFb9fQFPmjDLPt9iSoMGjw2M
Z+UVhJCaU3ISccd0DG5Ra/vzs9/O9Q==
=DgUi
-----END PGP SIGNATURE-----
Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
This fixes a race between changing the ext4 superblock uuid and operations
like mounting, resizing, changing features, etc.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jeremy Bongio <bongiojp@gmail.com>
Link: https://lore.kernel.org/r/20220721224422.438351-1-bongiojp@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch avoids an attempt to resize the filesystem to an
unaligned cluster boundary. An online resize to a size that is not
integral to cluster size results in the last iteration attempting to
grow the fs by a negative amount, which trips a BUG_ON and leaves the fs
with a corrupted in-memory superblock.
Signed-off-by: Oleg Kiselev <okiselev@amazon.com>
Link: https://lore.kernel.org/r/0E92A0AB-4F16-4F1A-94B7-702CC6504FDE@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch avoids doing an O(n**2)-complexity walk through every flex group.
Instead, it uses the already computed overhead information for the newly
allocated space, and simply adds it to the previously calculated
overhead stored in the superblock. This drastically reduces the time
taken to resize very large bigalloc filesystems (from 3+ hours for a
64TB fs down to milliseconds).
Signed-off-by: Oleg Kiselev <okiselev@amazon.com>
Link: https://lore.kernel.org/r/CE4F359F-4779-45E6-B6A9-8D67FDFF5AE2@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block range to free is validated in ext4_free_blocks() using
ext4_inode_block_valid() and then it's passed to ext4_mb_clear_bb().
However in some situations on bigalloc file system the range might be
adjusted after the validation in ext4_free_blocks() which can lead to
troubles on corrupted file systems such as one found by syzkaller that
resulted in the following BUG
kernel BUG at fs/ext4/ext4.h:3319!
PREEMPT SMP NOPTI
CPU: 28 PID: 4243 Comm: repro Kdump: loaded Not tainted 5.19.0-rc6+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
RIP: 0010:ext4_free_blocks+0x95e/0xa90
Call Trace:
<TASK>
? lock_timer_base+0x61/0x80
? __es_remove_extent+0x5a/0x760
? __mod_timer+0x256/0x380
? ext4_ind_truncate_ensure_credits+0x90/0x220
ext4_clear_blocks+0x107/0x1b0
ext4_free_data+0x15b/0x170
ext4_ind_truncate+0x214/0x2c0
? _raw_spin_unlock+0x15/0x30
? ext4_discard_preallocations+0x15a/0x410
? ext4_journal_check_start+0xe/0x90
? __ext4_journal_start_sb+0x2f/0x110
ext4_truncate+0x1b5/0x460
? __ext4_journal_start_sb+0x2f/0x110
ext4_evict_inode+0x2b4/0x6f0
evict+0xd0/0x1d0
ext4_enable_quotas+0x11f/0x1f0
ext4_orphan_cleanup+0x3de/0x430
? proc_create_seq_private+0x43/0x50
ext4_fill_super+0x295f/0x3ae0
? snprintf+0x39/0x40
? sget_fc+0x19c/0x330
? ext4_reconfigure+0x850/0x850
get_tree_bdev+0x16d/0x260
vfs_get_tree+0x25/0xb0
path_mount+0x431/0xa70
__x64_sys_mount+0xe2/0x120
do_syscall_64+0x5b/0x80
? do_user_addr_fault+0x1e2/0x670
? exc_page_fault+0x70/0x170
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf4e512ace
Fix it by making sure that the block range is properly validated before
used every time it changes in ext4_free_blocks() or ext4_mb_clear_bb().
Link: https://syzkaller.appspot.com/bug?id=5266d464285a03cee9dbfda7d2452a72c3c2ae7c
Reported-by: syzbot+15cd994e273307bf5cfa@syzkaller.appspotmail.com
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220714165903.58260-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_xattr_block_set() decides to remove xattr block the following
race can happen:
CPU1 CPU2
ext4_xattr_block_set() ext4_xattr_release_block()
new_bh = ext4_xattr_block_cache_find()
lock_buffer(bh);
ref = le32_to_cpu(BHDR(bh)->h_refcount);
if (ref == 1) {
...
mb_cache_entry_delete();
unlock_buffer(bh);
ext4_free_blocks();
...
ext4_forget(..., bh, ...);
jbd2_journal_revoke(..., bh);
ext4_journal_get_write_access(..., new_bh, ...)
do_get_write_access()
jbd2_journal_cancel_revoke(..., new_bh);
Later the code in ext4_xattr_block_set() finds out the block got freed
and cancels reusal of the block but the revoke stays canceled and so in
case of block reuse and journal replay the filesystem can get corrupted.
If the race works out slightly differently, we can also hit assertions
in the jbd2 code.
Fix the problem by making sure that once matching mbcache entry is
found, code dropping the last xattr block reference (or trying to modify
xattr block in place) waits until the mbcache entry reference is
dropped. This way code trying to reuse xattr block is protected from
someone trying to drop the last reference to xattr block.
Reported-and-tested-by: Ritesh Harjani <ritesh.list@gmail.com>
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unnecessary else (and thus indentation level) from a code block
in ext4_xattr_block_set(). It will also make following code changes
easier. No functional changes.
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we remove EA inode from mbcache as soon as its xattr refcount
drops to zero. However there can be pending attempts to reuse the inode
and thus refcount handling code has to handle the situation when
refcount increases from zero anyway. So save some work and just keep EA
inode in mbcache until it is getting evicted. At that moment we are sure
following iget() of EA inode will fail anyway (or wait for eviction to
finish and load things from the disk again) and so removing mbcache
entry at that moment is fine and simplifies the code a bit.
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_append() must always allocate a new block, otherwise we run the
risk of overwriting existing directory block corrupting the directory
tree in the process resulting in all manner of problems later on.
Add a sanity check to see if the logical block is already allocated and
error out if it is.
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4 directory handling code implicitly assumes that the
directory blocks are always within the i_size. In fact ext4_append()
will attempt to allocate next directory block based solely on i_size and
the i_size is then appropriately increased after a successful
allocation.
However, for this to work it requires i_size to be correct. If, for any
reason, the directory inode i_size is corrupted in a way that the
directory tree refers to a valid directory block past i_size, we could
end up corrupting parts of the directory tree structure by overwriting
already used directory blocks when modifying the directory.
Fix it by catching the corruption early in __ext4_read_dirblock().
Addresses Red-Hat-Bugzilla: #2070205
CVE: CVE-2022-1184
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add support to display the mb_optimize_scan value in
/proc/fs/ext4/<dev>/options file. The option is only
displayed when the value is non default.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20220704054603.21462-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now if check directoy entry is corrupted, ext4_empty_dir may return true
then directory will be removed when file system mounted with "errors=continue".
In order not to make things worse just return false when directory is corrupted.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220622090223.682234-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When migrating to extents, the checksum seed of temporary inode
need to be replaced by inode's, otherwise the inode checksums
will be incorrect when swapping the inodes data.
However, the temporary inode can not match it's checksum to
itself since it has lost it's own checksum seed.
mkfs.ext4 -F /dev/sdc
mount /dev/sdc /mnt/sdc
xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/sdc/testfile
chattr -e /mnt/sdc/testfile
chattr +e /mnt/sdc/testfile
umount /dev/sdc
fsck -fn /dev/sdc
========
...
Pass 1: Checking inodes, blocks, and sizes
Inode 13 passes checks, but checksum does not match inode. Fix? no
...
========
The fix is simple, save the checksum seed of temporary inode, and
recover it after migrating to extents.
Fixes: e81c9302a6 ("ext4: set csum seed in tmp inode while migrating to extents")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220617062515.2113438-1-lilingfeng3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the EXT4_INODE_HAS_XATTR_SPACE macro to more accurately
determine whether the inode have xattr space.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the ext4 inode does not have xattr space, 0 is returned in the
get_max_inline_xattr_value_size function. Otherwise, the function returns
a negative value when the inode does not contain EXT4_STATE_XATTR.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When adding an xattr to an inode, we must ensure that the inode_size is
not less than EXT4_GOOD_OLD_INODE_SIZE + extra_isize + pad. Otherwise,
the end position may be greater than the start position, resulting in UAF.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220616021358.2504451-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A race can occur in the unlikely event ext4 is unable to allocate a
physical cluster for a delayed allocation in a bigalloc file system
during writeback. Failure to allocate a cluster forces error recovery
that includes a call to mpage_release_unused_pages(). That function
removes any corresponding delayed allocated blocks from the extent
status tree. If a new delayed write is in progress on the same cluster
simultaneously, resulting in the addition of an new extent containing
one or more blocks in that cluster to the extent status tree, delayed
block accounting can be thrown off if that delayed write then encounters
a similar cluster allocation failure during future writeback.
Write lock the i_data_sem in mpage_release_unused_pages() to fix this
problem. Ext4's block/cluster accounting code for bigalloc relies on
i_data_sem for mutual exclusion, as is found in the delayed write path,
and the locking in mpage_release_unused_pages() is missing.
Cc: stable@kernel.org
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220615160530.1928801-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We use jbd_debug() in some places in ext4. It seems a bit strange to use
jbd2 debugging output function for ext4 code. Also these days
ext4_debug() uses dynamic printk so each debug message can be enabled /
disabled on its own so the time when it made some sense to have these
combined (to allow easier common selecting of messages to report) has
passed. Just convert all jbd_debug() uses in ext4 to ext4_debug().
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220608112355.4397-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After each buddy split, mb_mark_used will search the proper order
for the block which may consume some loop in mb_find_order_for_block.
In fact, we can reuse the order and buddy generated by the buddy split.
Reviewed by: lei.rao@intel.com
Signed-off-by: hanjinke <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220606155305.74146-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the EXT4_IOC_RESIZE_FS ioctl is complete, update the backup
superblocks. We don't do this for the old-style resize ioctls since
they are quite ancient, and only used by very old versions of
resize2fs --- and we don't want to update the backup superblocks every
time EXT4_IOC_GROUP_ADD is called, since it might get called a lot.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When doing an online resize, the on-disk superblock on-disk wasn't
updated. This means that when the file system is unmounted and
remounted, and the on-disk overhead value is non-zero, this would
result in the results of statfs(2) to be incorrect.
This was partially fixed by Commits 10b01ee92d ("ext4: fix overhead
calculation to account for the reserved gdt blocks"), 85d825dbf4
("ext4: force overhead calculation if the s_overhead_cluster makes no
sense"), and eb7054212e ("ext4: update the cached overhead value in
the superblock").
However, since it was too expensive to forcibly recalculate the
overhead for bigalloc file systems at every mount, this didn't fix the
problem for bigalloc file systems. This commit should address the
problem when resizing file systems with the bigalloc feature enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit 6493792d32 ("ext4: convert symlink external data block
mapping to bdev"), create new symlink with inline_data is not supported,
but it missing to handle the leftover inlined symlinks, which could
cause below error message and fail to read symlink.
ls: cannot read symbolic link 'foo': Structure needs cleaning
EXT4-fs error (device sda): ext4_map_blocks:605: inode #12: block
2021161080: comm ls: lblock 0 mapped to illegal pblock 2021161080
(length 1)
Fix this regression by adding ext4_read_inline_link(), which read the
inline data directly and convert it through a kmalloced buffer.
Fixes: 6493792d32 ("ext4: convert symlink external data block mapping to bdev")
Cc: stable@kernel.org
Reported-by: Torge Matthies <openglfreak@googlemail.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Torge Matthies <openglfreak@googlemail.com>
Link: https://lore.kernel.org/r/20220630090100.2769490-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Use a folio throughout __buffer_migrate_folio(), add kernel-doc for
buffer_migrate_folio() and buffer_migrate_folio_norefs(), move their
declarations to buffer.h and switch all filesystems that have wired
them up.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Patch series "v14 fsdax-rmap + v11 fsdax-reflink", v2.
The patchset fsdax-rmap is aimed to support shared pages tracking for
fsdax.
It moves owner tracking from dax_assocaite_entry() to pmem device driver,
by introducing an interface ->memory_failure() for struct pagemap. This
interface is called by memory_failure() in mm, and implemented by pmem
device.
Then call holder operations to find the filesystem which the corrupted
data located in, and call filesystem handler to track files or metadata
associated with this page.
Finally we are able to try to fix the corrupted data in filesystem and do
other necessary processing, such as killing processes who are using the
files affected.
The call trace is like this:
memory_failure()
|* fsdax case
|------------
|pgmap->ops->memory_failure() => pmem_pgmap_memory_failure()
| dax_holder_notify_failure() =>
| dax_device->holder_ops->notify_failure() =>
| - xfs_dax_notify_failure()
| |* xfs_dax_notify_failure()
| |--------------------------
| | xfs_rmap_query_range()
| | xfs_dax_failure_fn()
| | * corrupted on metadata
| | try to recover data, call xfs_force_shutdown()
| | * corrupted on file data
| | try to recover data, call mf_dax_kill_procs()
|* normal case
|-------------
|mf_generic_kill_procs()
The patchset fsdax-reflink attempts to add CoW support for fsdax, and
takes XFS, which has both reflink and fsdax features, as an example.
One of the key mechanisms needed to be implemented in fsdax is CoW. Copy
the data from srcmap before we actually write data to the destination
iomap. And we just copy range in which data won't be changed.
Another mechanism is range comparison. In page cache case, readpage() is
used to load data on disk to page cache in order to be able to compare
data. In fsdax case, readpage() does not work. So, we need another
compare data with direct access support.
With the two mechanisms implemented in fsdax, we are able to make reflink
and fsdax work together in XFS.
This patch (of 14):
To easily track filesystem from a pmem device, we introduce a holder for
dax_device structure, and also its operation. This holder is used to
remember who is using this dax_device:
- When it is the backend of a filesystem, the holder will be the
instance of this filesystem.
- When this pmem device is one of the targets in a mapped device, the
holder will be this mapped device. In this case, the mapped device
has its own dax_device and it will follow the first rule. So that we
can finally track to the filesystem we needed.
The holder and holder_ops will be set when filesystem is being mounted,
or an target device is being activated.
Link: https://lkml.kernel.org/r/20220603053738.1218681-1-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/20220603053738.1218681-2-ruansy.fnst@fujitsu.com
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.wiliams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Improve static type checking by using the new blk_opf_t type for
variables that represent request flags.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Baokun Li <libaokun1@huawei.com>
Cc: Ye Bin <yebin10@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-52-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both submit_bh() and ll_rw_block() accept a request operation type and
request flags as their first two arguments. Micro-optimize these two
functions by combining these first two arguments into a single argument.
This patch does not change the behavior of any of the modified code.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Song Liu <song@kernel.org> (for the md changes)
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-48-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the remaining calls of bdevname with snprintf using the %pg
format specifier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mmp_bdevname is currently both initialized nested inside the kthread_run
call in ext4_multi_mount_protect and in the kmmpd thread started by it.
Lift the initiaization out of the kthread_run call in
ext4_multi_mount_protect, move the BUILD_BUG_ON next to it and remove
the duplicate assignment inside of kmmpd.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220713055317.1888500-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The called functions all use pages, so just convert back to a page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
If the folio is large, it may overlap the beginning or end of the
unused range. If it does, we need to avoid invalidating it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.
This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.
The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.
Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Port the is_quota_modification() and dqout_transfer() helper to type
safe vfs{g,u}id_t. Since these helpers are only called by a few
filesystems don't introduce a new helper but simply extend the existing
helpers to pass down the mount's idmapping.
Note, that this is a non-functional change, i.e. nothing will have
happened here or at the end of this series to how quota are done! This
a change necessary because we will at the end of this series make
ownership changes easier to reason about by keeping the original value
in struct iattr for both non-idmapped and idmapped mounts.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
Since struct iattr uses an anonymous union with overlapping types as
supported by the C standard, filesystems that haven't converted to
ia_vfs{g,u}id won't see any difference and things will continue to work
as before. In other words, no functional changes intended with this
change.
Link: https://lore.kernel.org/r/20220621141454.2914719-7-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
No functional changes intended.
Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
Fixes: 46c116b920 ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
ext4_mb_new_blocks+0x9df/0x5d30
ext4_ext_map_blocks+0x1803/0x4d80
ext4_map_blocks+0x3a4/0x1a10
ext4_writepages+0x126d/0x2c30
do_writepages+0x7f/0x1b0
__filemap_fdatawrite_range+0x285/0x3b0
file_write_and_wait_range+0xb1/0x140
ext4_sync_file+0x1aa/0xca0
vfs_fsync_range+0xfb/0x260
do_fsync+0x48/0xa0
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
do_fsync
vfs_fsync_range
ext4_sync_file
file_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_mb_new_blocks
ext4_mb_normalize_request
>>> start + size <= ac->ac_o_ex.fe_logical
ext4_mb_regular_allocator
ext4_mb_simple_scan_group
ext4_mb_use_best_found
ext4_mb_new_preallocation
ext4_mb_new_inode_pa
ext4_mb_use_inode_pa
>>> set ac->ac_b_ex.fe_len <= 0
ext4_mb_mark_diskspace_used
>>> BUG_ON(ac->ac_b_ex.fe_len <= 0);
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org
Fixes: cd648b8a8f ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220526040412.173025-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got issue as follows:
[home]# mount /dev/sda test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock! Retrying...
Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.
To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When delayed allocation is disabled (either through mount option or
because we are running low on free space), ext4_write_begin() allocates
blocks with EXT4_GET_BLOCKS_IO_CREATE_EXT flag. With this flag extent
merging is disabled and since ext4_write_begin() is called for each page
separately, we end up with a *lot* of 1 block extents in the extent tree
and following writeback is writing 1 block at a time which results in
very poor write throughput (4 MB/s instead of 200 MB/s). These days when
ext4_get_block_unwritten() is used only by ext4_write_begin(),
ext4_page_mkwrite() and inline data conversion, we can safely allow
extent merging to happen from these paths since following writeback will
happen on different boundaries anyway. So use
EXT4_GET_BLOCKS_CREATE_UNRIT_EXT instead which restores the performance.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220520111402.4252-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We have already check the io_error and uptodate flag before submitting
the superblock buffer, and re-set the uptodate flag if it has been
failed to write out. But it was lockless and could be raced by another
ext4_commit_super(), and finally trigger '!uptodate' WARNING when
marking buffer dirty. Fix it by submit buffer directly.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220520023216.3065073-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first argument
like ->read_folio
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmKNMDUACgkQDpNsjXcp
gj4/mwf/bpHhXH4ZoNIvtUpTF6rZbqeffmc0VrbxCZDZ6igRnRPglxZ9H9v6L53O
7B0FBQIfxgNKHZpdqGdOkv8cjg/GMe/HJUbEy5wOakYPo4L9fZpHbDZ9HM2Eankj
xBqLIBgBJ7doKr+Y62DAN19TVD8jfRfVtli5mqXJoNKf65J7BkxljoTH1L3EXD9d
nhLAgyQjR67JQrT/39KMW+17GqLhGefLQ4YnAMONtB6TVwX/lZmigKpzVaCi4r26
bnk5vaR/3PdjtNxIoYvxdc71y2Eg05n2jEq9Wcy1AaDv/5vbyZUlZ2aBSaIVbtKX
WfrhN9O3L0bU5qS7p9PoyfLc9wpq8A==
=djLv
-----END PGP SIGNATURE-----
Merge tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
crypto related fucntions from fs/ext4/super.c into a new
fs/ext4/crypto.c, and fix a number of bugs found by fuzzers and error
injection tools.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmKNOh0ACgkQ8vlZVpUN
gaP4kwf+KfqZ/iBDOOCMKV5C7/Z4ieiMLeNqzCWmvju7jceYBoSLOIz3w5MFjEV9
5ZB/6MovMZ/vZRtm76k0K01ayHKUd1BKjwwvIaABjdNVDTar5Wg/Tq7MF0OMQ5Kw
ec5rvOQ05VzbXwf/JOjp7IHP/9yEbtgKjAYzgVyMVGrE8jxLQ+UOSUBzzZEHv/js
Xh7GmRGEs5V7bj+V4SuCaEKSf3wYjT/zlJNIPtsg9RJeQojOP2qlOFhcGeduF1X/
E4OwabfHqdmlbdI0vL3ANb8nByi/bA0p8i9PGqGIDx0nRUK9UzJCjePmkPux6koT
pPZLo8DKR8g5i0Hn/ennA9tAIXIaXg==
=OliY
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4.
In particular, move the crypto related fucntions from fs/ext4/super.c
into a new fs/ext4/crypto.c, and fix a number of bugs found by fuzzers
and error injection tools"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
ext4: only allow test_dummy_encryption when supported
ext4: fix bug_on in __es_tree_search
ext4: avoid cycles in directory h-tree
ext4: verify dir block before splitting it
ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state
ext4: fix bug_on in ext4_writepages
ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()
ext4: cleanup function defs from ext4.h into crypto.c
ext4: move ext4 crypto code to its own file crypto.c
ext4: fix memory leak in parse_apply_sb_mount_options()
ext4: reject the 'commit' option on ext2 filesystems
ext4: remove duplicated #include of dax.h in inode.c
ext4: fix race condition between ext4_write and ext4_convert_inline_data
ext4: convert symlink external data block mapping to bdev
ext4: add nowait mode for ext4_getblk()
ext4: fix journal_ioprio mount option handling
ext4: mark group as trimmed only if it was fully scanned
ext4: fix use-after-free in ext4_rename_dir_prepare
ext4: add unmount filesystem message
ext4: remove unnecessary conditionals
...
-----BEGIN PGP SIGNATURE-----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=lv6P
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features:
- subpage:
- support for PAGE_SIZE > 4K (previously only 64K)
- make it work with raid56
- repair super block num_devices automatically if it does not match
the number of device items
- defrag can convert inline extents to regular extents, up to now
inline files were skipped but the setting of mount option
max_inline could affect the decision logic
- zoned:
- minimal accepted zone size is explicitly set to 4MiB
- make zone reclaim less aggressive and don't reclaim if there are
enough free zones
- add per-profile sysfs tunable of the reclaim threshold
- allow automatic block group reclaim for non-zoned filesystems, with
sysfs tunables
- tree-checker: new check, compare extent buffer owner against owner
rootid
Performance:
- avoid blocking on space reservation when doing nowait direct io
writes (+7% throughput for reads and writes)
- NOCOW write throughput improvement due to refined locking (+3%)
- send: reduce pressure to page cache by dropping extent pages right
after they're processed
Core:
- convert all radix trees to xarray
- add iterators for b-tree node items
- support printk message index
- user bulk page allocation for extent buffers
- switch to bio_alloc API, use on-stack bios where convenient, other
bio cleanups
- use rw lock for block groups to favor concurrent reads
- simplify workques, don't allocate high priority threads for all
normal queues as we need only one
- refactor scrub, process chunks based on their constraints and
similarity
- allocate direct io structures on stack and pass around only
pointers, avoids allocation and reduces potential error handling
Fixes:
- fix count of reserved transaction items for various inode
operations
- fix deadlock between concurrent dio writes when low on free data
space
- fix a few cases when zones need to be finished
VFS, iomap:
- add helper to check if sb write has started (usable for assertions)
- new helper iomap_dio_alloc_bio, export iomap_dio_bio_end_io"
* tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (173 commits)
btrfs: zoned: introduce a minimal zone size 4M and reject mount
btrfs: allow defrag to convert inline extents to regular extents
btrfs: add "0x" prefix for unsupported optional features
btrfs: do not account twice for inode ref when reserving metadata units
btrfs: zoned: fix comparison of alloc_offset vs meta_write_pointer
btrfs: send: avoid trashing the page cache
btrfs: send: keep the current inode open while processing it
btrfs: allocate the btrfs_dio_private as part of the iomap dio bio
btrfs: move struct btrfs_dio_private to inode.c
btrfs: remove the disk_bytenr in struct btrfs_dio_private
btrfs: allocate dio_data on stack
iomap: add per-iomap_iter private data
iomap: allow the file system to provide a bio_set for direct I/O
btrfs: add a btrfs_dio_rw wrapper
btrfs: zoned: zone finish unused block group
btrfs: zoned: properly finish block group on metadata write
btrfs: zoned: finish block group when there are no more allocatable bytes left
btrfs: zoned: consolidate zone finish functions
btrfs: zoned: introduce btrfs_zoned_bg_is_full
btrfs: improve error reporting in lookup_inline_extent_backref
...
Make the test_dummy_encryption mount option require that the encrypt
feature flag be already enabled on the filesystem, rather than
automatically enabling it. Practically, this means that "-O encrypt"
will need to be included in MKFS_OPTIONS when running xfstests with the
test_dummy_encryption mount option. (ext4/053 also needs an update.)
Moreover, as long as the preconditions for test_dummy_encryption are
being tightened anyway, take the opportunity to start rejecting it when
!CONFIG_FS_ENCRYPTION rather than ignoring it.
The motivation for requiring the encrypt feature flag is that:
- Having the filesystem auto-enable feature flags is problematic, as it
bypasses the usual sanity checks. The specific issue which came up
recently is that in kernel versions where ext4 supports casefold but
not encrypt+casefold (v5.1 through v5.10), the kernel will happily add
the encrypt flag to a filesystem that has the casefold flag, making it
unmountable -- but only for subsequent mounts, not the initial one.
This confused the casefold support detection in xfstests, causing
generic/556 to fail rather than be skipped.
- The xfstests-bld test runners (kvm-xfstests et al.) already use the
required mkfs flag, so they will not be affected by this change. Only
users of test_dummy_encryption alone will be affected. But, this
option has always been for testing only, so it should be fine to
require that the few users of this option update their test scripts.
- f2fs already requires it (for its equivalent feature flag).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/extents_status.c:199!
[...]
RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline]
RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217
[...]
Call Trace:
ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766
ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561
ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964
ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384
ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567
ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980
ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031
ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257
v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63
v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82
vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368
dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490
ext4_quota_enable fs/ext4/super.c:6137 [inline]
ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163
ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754
mount_bdev+0x2e9/0x3b0 fs/super.c:1158
mount_fs+0x4b/0x1e4 fs/super.c:1261
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_enable_quotas
ext4_quota_enable
ext4_iget
__ext4_iget
ext4_ext_check_inode
ext4_ext_check
__ext4_ext_check
ext4_valid_extent_entries
Check for overlapping extents does't take effect
dquot_enable
vfs_load_quota_inode
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
ext4_es_cache_extent
__es_tree_search
ext4_es_end
BUG_ON(es->es_lblk + es->es_len < es->es_lblk)
The error ext4 extents is as follows:
0af3 0300 0400 0000 00000000 extent_header
00000000 0100 0000 12000000 extent1
00000000 0100 0000 18000000 extent2
02000000 0400 0000 14000000 extent3
In the ext4_valid_extent_entries function,
if prev is 0, no error is returned even if lblock<=prev.
This was intended to skip the check on the first extent, but
in the error image above, prev=0+1-1=0 when checking the second extent,
so even though lblock<=prev, the function does not return an error.
As a result, bug_ON occurs in __es_tree_search and the system panics.
To solve this problem, we only need to check that:
1. The lblock of the first extent is not less than 0.
2. The lblock of the next extent is not less than
the next block of the previous extent.
The same applies to extent_idx.
Cc: stable@kernel.org
Fixes: 5946d08937 ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518120816.1541863-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A maliciously corrupted filesystem can contain cycles in the h-tree
stored inside a directory. That can easily lead to the kernel corrupting
tree nodes that were already verified under its hands while doing a node
split and consequently accessing unallocated memory. Fix the problem by
verifying traversed block numbers are unique.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518093332.13986-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The EXT4_FC_REPLAY bit in sbi->s_mount_state is used to indicate that
we are in the middle of replay the fast commit journal. This was
actually a mistake, since the sbi->s_mount_info is initialized from
es->s_state. Arguably s_mount_state is misleadingly named, but the
name is historical --- s_mount_state and s_state dates back to ext2.
What should have been used is the ext4_{set,clear,test}_mount_flag()
inline functions, which sets EXT4_MF_* bits in sbi->s_mount_flags.
The problem with using EXT4_FC_REPLAY is that a maliciously corrupted
superblock could result in EXT4_FC_REPLAY getting set in
s_mount_state. This bypasses some sanity checks, and this can trigger
a BUG() in ext4_es_cache_extent(). As a easy-to-backport-fix, filter
out the EXT4_FC_REPLAY bit for now. We should eventually transition
away from EXT4_FC_REPLAY to something like EXT4_MF_REPLAY.
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20220420192312.1655305-1-phind.uet@gmail.com
Link: https://lore.kernel.org/r/20220517174028.942119-1-tytso@mit.edu
Reported-by: syzbot+c7358a3cd05ee786eb31@syzkaller.appspotmail.com
-----BEGIN PGP SIGNATURE-----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=0Rw1
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
This patch move code for FS_IOC_GET_ENCRYPTION_PWSALT case into
ext4's crypto.c file, i.e. ext4_ioctl_get_encryption_pwsalt()
and uuid_is_zero(). This is mostly refactoring logic and should
not affect any functionality change.
Suggested-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5af98b17152a96b245b4f7d2dfb8607fc93e36aa.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some of these functions when CONFIG_FS_ENCRYPTION is enabled are not
really inline (let compiler be the best judge of it).
Remove inline and move them into crypto.c where they should be present.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/b7b9de2c7226298663fb5a0c28909135e2ab220f.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is to cleanup super.c file which has grown quite large.
So, start moving ext4 crypto related code to where it should
be in the first place i.e. fs/ext4/crypto.c
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/7d637e093cbc34d727397e8d41a53a1b9ca7d7a4.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If processing the on-disk mount options fails after any memory was
allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is
leaked. Fix this by calling ext4_fc_free() instead of kfree() directly.
Reproducer:
mkfs.ext4 -F /dev/vdc
tune2fs /dev/vdc -E mount_opts=usrjquota=file
echo clear > /sys/kernel/debug/kmemleak
mount /dev/vdc /vdc
echo scan > /sys/kernel/debug/kmemleak
sleep 5
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
Fixes: 7edfd85b1f ("ext4: Completely separate options parsing and sb setup")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220513231605.175121-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'commit' option is only applicable for ext3 and ext4 filesystems,
and has never been accepted by the ext2 filesystem driver, so the ext4
driver shouldn't allow it on ext2 filesystems.
This fixes a failure in xfstest ext4/053.
Fixes: 8dc0aa8cf0 ("ext4: check incompatible mount options while mounting ext2/3")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220510183232.172615-1-ebiggers@kernel.org
Fix following includecheck warning:
./fs/ext4/inode.c: linux/dax.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220504225025.44753-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hulk Robot reported a BUG_ON:
==================================================================
EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0,
block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters
kernel BUG at fs/ext4/ext4_jbd2.c:53!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1
RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline]
RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116
[...]
Call Trace:
ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795
generic_perform_write+0x279/0x3c0 mm/filemap.c:3344
ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270
ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520
do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732
do_iter_write+0x107/0x430 fs/read_write.c:861
vfs_writev fs/read_write.c:934 [inline]
do_pwritev+0x1e5/0x380 fs/read_write.c:1031
[...]
==================================================================
Above issue may happen as follows:
cpu1 cpu2
__________________________|__________________________
do_pwritev
vfs_writev
do_iter_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_destroy_inline_data_nolock
clear EXT4_STATE_MAY_INLINE_DATA
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
ext4_mb_regular_allocator
ext4_mb_good_group_nolock
ext4_mb_init_group
ext4_mb_init_cache
ext4_mb_generate_buddy --> error
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_restore_inline_data
set EXT4_STATE_MAY_INLINE_DATA
ext4_block_write_begin
ext4_da_write_end
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_write_inline_data_end
handle=NULL
ext4_journal_stop(handle)
__ext4_journal_stop
ext4_put_nojournal(handle)
ref_cnt = (unsigned long)handle
BUG_ON(ref_cnt == 0) ---> BUG_ON
The lock held by ext4_convert_inline_data is xattr_sem, but the lock
held by generic_perform_write is i_rwsem. Therefore, the two locks can
be concurrent.
To solve above issue, we add inode_lock() for ext4_convert_inline_data().
At the same time, move ext4_convert_inline_data() in front of
ext4_punch_hole(), remove similar handling from ext4_punch_hole().
Fixes: 0c8d414f16 ("ext4: let fallocate handle inline data correctly")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220428134031.4153381-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Symlink's external data block is one kind of metadata block, and now
that almost all ext4 metadata block's page cache (e.g. directory blocks,
quota blocks...) belongs to bdev backing inode except the symlink. It
is essentially worked in data=journal mode like other regular file's
data block because probably in order to make it simple for generic VFS
code handling symlinks or some other historical reasons, but the logic
of creating external data block in ext4_symlink() is complicated. and it
also make things confused if user do not want to let the filesystem
worked in data=journal mode. This patch convert the final exceptional
case and make things clean, move the mapping of the symlink's external
data block to bdev like any other metadata block does.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20220424140936.1898920-3-yi.zhang@huawei.com
Current ext4_getblk() might sleep if some resources are not valid or
could be race with a concurrent extents modifing procedure. So we
cannot call ext4_getblk() and ext4_map_blocks() to get map blocks in
the atomic context in some fast path (e.g. the upcoming procedure of
getting symlink external block in the RCU context), even if the map
extents have already been check and cached.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20220424140936.1898920-2-yi.zhang@huawei.com
In __ext4_super() we always overwrote the user specified journal_ioprio
value with a default value, expecting parse_apply_sb_mount_options() to
later correctly set ctx->journal_ioprio to the user specified value.
However, if parse_apply_sb_mount_options() returned early because of
empty sbi->es_s->s_mount_opts, the correct journal_ioprio value was
never set.
This patch fixes __ext4_super() to only use the default value if the
user has not specified any value for journal_ioprio.
Similarly, the remount behavior was to either use journal_ioprio
value specified during initial mount, or use the default value
irrespective of the journal_ioprio value specified during remount.
This patch modifies this to first check if a new value for ioprio
has been passed during remount and apply it. If no new value is
passed, use the value specified during initial mount.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220418083545.45778-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Otherwise nonaligned fstrim calls will works inconveniently for iterative
scanners, for example:
// trim [0,16MB] for group-1, but mark full group as trimmed
fstrim -o $((1024*1024*128)) -l $((1024*1024*16)) ./m
// handle [16MB,16MB] for group-1, do nothing because group already has the flag.
fstrim -o $((1024*1024*144)) -l $((1024*1024*16)) ./m
[ Update function documentation for ext4_trim_all_free -- TYT ]
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Link: https://lore.kernel.org/r/1650214995-860245-1-git-send-email-dmtrmonakhov@yandex-team.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Allow the file system to keep state for all iterations. For now only
wire it up for direct I/O as there is an immediate need for it there.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have kernel message at mount time, system administrator
could acquire the mount time, device and options easily. But we don't
have corresponding unmounting message at umount time, so we cannot know
if someone umount a filesystem easily. Some of the modern filesystems
(e.g. xfs) have the umounting kernel message, so add one for ext4
filesystem for convenience.
EXT4-fs (sdb): mounted filesystem with ordered data mode. Quota mode: none.
EXT4-fs (sdb): unmounting filesystem.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220412145320.2669897-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
iput() has already handled null and non-null parameter, so it is no
need to use if().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220411032337.2517465-1-lv.ruyi@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When enter elseif branch, the the MB_CHECK_ASSERT will never fail.
In addtion, the only illegal combination is 0/0, which can be caught
by the first if branch.
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220404152243.13556-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After recent changes to the mb_optimize_scan mount option
the DEFAULT_MB_OPTIMIZE_SCAN is no longer needed so get
rid of it.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220315114454.104182-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
All but two of the callers already have a folio; pass a folio into
try_to_free_buffers(). This removes the last user of cancel_dirty_page()
so remove that wrapper function too.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Also convert it to return a bool since it's called from release_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The use of folios should be pushed deeper into ext4 from here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
This function is NOT converted to handle large folios, so include
an assert that the filesystem isn't passing one in. Otherwise, use
the folio functions instead of the page functions, where they exist.
Convert all filesystems which use block_read_full_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
pagecache_write_begin() and pagecache_write_end() are now trivial
wrappers, so call the aops directly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Instead of setting AOP_FLAG_NOFS, use memalloc_nofs_save() and
memalloc_nofs_restore() to prevent GFP_FS allocations recursing
into the filesystem with a journal already started.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Instead of setting AOP_FLAG_NOFS, use memalloc_nofs_save() and
memalloc_nofs_restore() to prevent GFP_FS allocations recursing
into the filesystem with a journal already started.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Replace use of AOP_FLAG_NOFS with calls to memalloc_nofs_save()
and memalloc_nofs_restore().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Since commit 8bc1379b82, the transaction is stopped before calling
ext4_da_convert_inline_data_to_extent(), which means we can do GFP_FS
allocations and recurse into the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
By using the memalloc_nofs_save() functionality, we can call
page_symlink(), safe in the knowledge that it won't recurse into the
filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
injection testing. Change ext4's fallocate to update consistently
drop set[ug]id bits when an fallocate operation might possibly change
the user-visible contents of a file. Also, improve handling of
potentially invalid values in the the s_overhead_cluster superblock
field to avoid ext4 returning a negative number of free blocks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmJinf8ACgkQ8vlZVpUN
gaOHgQf+MKgUZgteYogLzoP3mF1kSycOGawk4wZ3QHOLz7AvsV2p9J8BWihbS/EK
dBydfXbTMvCUrjWmpqb5dHECRzxdfxOJ0SPJtibc8DZaJc9ImNFmgSp9kyJ3uRaN
cPGO6Lz2RXpdumVMPPLwzUJdVyrLi0K6I1NYSocxKgribePzd+xil8S9zRZj8Bpe
RaeH0EytcRj2CI5qs5mI/mOPBAMsZeczd3HInI3gyCgP2I4ZOfsADne3APx57mcI
IGKf77nvIwMHeKel3MGYfFPitEs5cZpHUhHplCMtgFsO8H0IR93tqnlaCvTM7VAZ
Slamgl7pfcXFcLZP+pm0QL/82ub7iw==
=FIds
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix some syzbot-detected bugs, as well as other bugs found by I/O
injection testing.
Change ext4's fallocate to consistently drop set[ug]id bits when an
fallocate operation might possibly change the user-visible contents of
a file.
Also, improve handling of potentially invalid values in the the
s_overhead_cluster superblock field to avoid ext4 returning a negative
number of free blocks"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: fix a potential race while discarding reserved buffers after an abort
ext4: update the cached overhead value in the superblock
ext4: force overhead calculation if the s_overhead_cluster makes no sense
ext4: fix overhead calculation to account for the reserved gdt blocks
ext4, doc: fix incorrect h_reserved size
ext4: limit length to bitmap_maxbytes - blocksize in punch_hole
ext4: fix use-after-free in ext4_search_dir
ext4: fix bug_on in start_this_handle during umount filesystem
ext4: fix symlink file size not match to file content
ext4: fix fallocate to use file_modified to update permissions consistently
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abstract away implementation details from file systems by providing a
block_device based helper to retrieve the discard granularity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the nonrot flag based on the block_device instead
of having to poke into the block layer internal request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we (re-)calculate the file system overhead amount and it's
different from the on-disk s_overhead_clusters value, update the
on-disk version since this can take potentially quite a while on
bigalloc file systems.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
If the file system does not use bigalloc, calculating the overhead is
cheap, so force the recalculation of the overhead so we don't have to
trust the precalculated overhead in the superblock.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The kernel calculation was underestimating the overhead by not taking
into account the reserved gdt blocks. With this change, the overhead
calculated by the kernel matches the overhead calculation in mke2fs.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
We got issue as follows:
[home]# fsck.ext4 -fn ram0yb
e2fsck 1.45.6 (20-Mar-2020)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Symlink /p3/d14/d1a/l3d (inode #3494) is invalid.
Clear? no
Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0).
Fix? no
As the symlink file size does not match the file content. If the writeback
of the symlink data block failed, ext4_finish_bio() handles the end of IO.
However this function fails to mark the buffer with BH_write_io_error and
so when unmount does journal checkpoint it cannot detect the writeback
error and will cleanup the journal. Thus we've lost the correct data in the
journal area. To solve this issue, mark the buffer as BH_write_io_error in
ext4_finish_bio().
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321144438.201685-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220308185043.GA117678@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
This should use the new folio_buffers() instead of page_has_buffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
We can extract both the file pointer and the pos from the iocb.
This simplifies each caller as well as allowing generic_perform_write()
to see more of the iocb contents in the future.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
All filesystems have now been converted to use ->readahead, so
remove the ->readpages operation and fix all the comments that
used to refer to it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=efaq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block
Pull NVMe write streams removal from Jens Axboe:
"This removes the write streams support in NVMe. No vendor ever really
shipped working support for this, and they are not interested in
supporting it.
With the NVMe support gone, we have nothing in the tree that supports
this. Remove passing around of the hints.
The only discussion point in this patchset imho is the fact that the
file specific write hint setting/getting fcntl helpers will now return
-1/EINVAL like they did before we supported write hints. No known
applications use these functions, I only know of one prototype that I
help do for RocksDB, and that's not used. That said, with a change
like this, it's always a bit controversial. Alternatively, we could
just make them return 0 and pretend it worked. It's placement based
hints after all"
* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
fs: remove fs.f_write_hint
fs: remove kiocb.ki_hint
block: remove the per-bio/request write hint
nvme: remove support or stream based temperature hint
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays with
flexible-array members. This patch has been baking in linux-next for a
whole development cycle.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=xZD2
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
Primarily this series converts some of the address_space operations
to take a folio instead of a page.
->is_partially_uptodate() takes a folio instead of a page and changes the
type of the 'from' and 'count' arguments to make it obvious they're bytes.
->invalidatepage() becomes ->invalidate_folio() and has a similar type change.
->launder_page() becomes ->launder_folio()
->set_page_dirty() becomes ->dirty_folio() and adds the address_space as
an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp
gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY
BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5
SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG
EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr
omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6
Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A==
=cOiq
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().
Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4]
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
more bug fixes and clean ups in the ext4 fast_commit feature (most
notably, in the tracepoints). In the jbd2 layer, the t_handle_lock
spinlock has been removed, with the last place where it was actually
needed replaced with an atomic cmpxchg.
-----BEGIN PGP SIGNATURE-----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=naSC
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Fix some bugs in converting ext4 to use the new mount API, as well as
more bug fixes and clean ups in the ext4 fast_commit feature (most
notably, in the tracepoints).
In the jbd2 layer, the t_handle_lock spinlock has been removed, with
the last place where it was actually needed replaced with an atomic
cmpxchg"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (35 commits)
ext4: fix kernel doc warnings
ext4: fix remaining two trace events to use same printk convention
ext4: add commit tid info in ext4_fc_commit_start/stop trace events
ext4: add commit_tid info in jbd debug log
ext4: add transaction tid info in fc_track events
ext4: add new trace event in ext4_fc_cleanup
ext4: return early for non-eligible fast_commit track events
ext4: do not call FC trace event in ext4_fc_commit() if FS does not support FC
ext4: convert ext4_fc_track_dentry type events to use event class
ext4: fix ext4_fc_stats trace point
ext4: remove unused enum EXT4_FC_COMMIT_FAILED
ext4: warn when dirtying page w/o buffers in data=journal mode
doc: fixed a typo in ext4 documentation
ext4: make mb_optimize_scan performance mount option work with extents
ext4: make mb_optimize_scan option work with set/unset mount cmd
ext4: don't BUG if someone dirty pages without asking ext4 first
ext4: remove redundant assignment to variable split_flag1
ext4: fix underflow in ext4_max_bitmap_size()
ext4: fix ext4_mb_clear_bb() kernel-doc comment
ext4: fix fs corruption when tring to remove a non-empty directory with IO error
...
Add support for direct I/O on encrypted files when blk-crypto (inline
encryption) is being used for file contents encryption.
There will be a merge conflict with the block pull request in
fs/iomap/direct-io.c, due to some bio interface cleanups. The merge
resolution is straightforward and can be found in linux-next.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYjgCfhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK6vjAQDp8D8OKIyj67KjYwvyHpNy0fZhxeur
RexC0nDfd9BE/AD/fV6zpCglmsuGxqxL0jmqeczKXn2y7nRFmPciCBTi/wY=
=kwNd
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"Add support for direct I/O on encrypted files when blk-crypto (inline
encryption) is being used for file contents encryption"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: update documentation for direct I/O support
f2fs: support direct I/O with fscrypt using blk-crypto
ext4: support direct I/O with fscrypt using blk-crypto
iomap: support direct I/O with fscrypt using blk-crypto
fscrypt: add functions for direct I/O support
-----BEGIN PGP SIGNATURE-----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=PzC6
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/alloc-cleanups-2022-03-18' of git://git.kernel.dk/linux-block
Pull bio_alloc() cleanups from Jens Axboe:
"Filesystem cleanups to pass the bio op to bio_alloc() instead of
setting it just before bio submission".
* tag 'for-5.18/alloc-cleanups-2022-03-18' of git://git.kernel.dk/linux-block:
f2fs: pass the bio operation to bio_alloc_bioset
f2fs: don't pass a bio to f2fs_target_device
nilfs2: pass the operation to bio_alloc
ext4: pass the operation to bio_alloc
mpage: pass the operation to bio_alloc
This is a mechanical change.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Convert all callers; mostly this is just changing the aops to point
at it, but a few implementations need a little more work.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This adds commit_tid info in ext4_fc_commit_start/stop which is helpful
in debugging fast_commit issues.
For e.g. issues where due to jbd2 journal full commit, FC miss to commit
updates to a file.
Also improves TP_prink format string i.e. all ext4 and jbd2 trace events
starts with "dev MAjOR,MINOR". Let's follow the same convention while we
are still at it.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/ebcd6b9ab5b718db30f90854497886801ce38c63.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds commit_tid argument in ext4_fc_update_stats()
so that we can add this information too in jbd_debug logs.
This is also required in a later patch to pass the commit_tid info in
ext4_fc_commit_start/stop() trace events.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/dabda3f2919a60e01887e798bf5915216b451733.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds the transaction & inode tid info in trace events for
callers of ext4_fc_track_template(). This is helpful in debugging race
conditions where an inode could belong to two different transaction tids.
It also fixes the checkpatch warnings which says use tabs instead of
spaces.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c203c09dc11bb372803c430f621f25a4b8c2c8b4.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_fc_track_template() checks, whether the trace event
path belongs to replay or does sb has ineligible set, if yes it simply
returns. This patch pulls those checks before calling
ext4_fc_track_template() in the callers of ext4_fc_track_template().
[ Add checks to ext4_rename() which calls the __ext4_fc_track_*()
functions directly. -- TYT ]
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/3cd025d9c490218a92e6d8fb30b6123e693373e3.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
These filesystems use __set_page_dirty_nobuffers() either directly or
with a very thin wrapper; convert them en masse.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Extensive changes, but fairly mechanical.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
We used to have to use noop_invalidatepage() to prevent
block_invalidatepage() from being called, but that behaviour is now gone.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Remove special-casing of a NULL invalidatepage, since there is no
more block_invalidatepage.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Instead of calling ->invalidatepage directly, use folio_invalidate().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This just puts trace_ext4_fc_commit_start(sb) & ktime_get()
for measuring FC commit time, after the check of whether sb
supports JOURNAL_FAST_COMMIT or not.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d53cf3e535924ec0a1eb41a560e96561b0727e7a.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Below commit removed all references of EXT4_FC_COMMIT_FAILED.
commit 0915e464cb ("ext4: simplify updating of fast commit stats")
Just remove it since it is not used anymore.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/c941357e476be07a1138c7319ca5faab7fb80fc6.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Recently I've got a report of BUG_ON trigerring during transaction
commit in ext4_journalled_writepage_callback() because we've spotted a
dirty page without buffers. Add WARN_ON_ONCE to
ext4_journalled_set_page_dirty() to catch the problematic condition
earlier where we have better chance of understanding which code path is
creating dirty data without preparing the page properly. Also update the
comment with current information when we are at it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220310101832.5645-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After moving to the new mount API, mb_optimize_scan mount option
handling was not working as expected due to the parsed value always
being overwritten by default. Refactor and fix this to the expected
behavior described below:
* mb_optimize_scan=1 - On
* mb_optimize_scan=0 - Off
* mb_optimize_scan not passed - On if no. of BGs > threshold else off
* Remounts retain previous value unless we explicitly pass the option
with a new value
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Cc: stable@kernel.org
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c98970fe99f26718586d02e942f293300fb48ef3.1646732698.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With the NVMe support for this gone, there are no consumers of these hints
left, so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220304175556.407719-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the %pg format specifier to save on stack consuption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220304180105.409765-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
[1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
[2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com
Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/YiDS9wVfq4mM2jGK@mit.edu
Variable split_flag1 is being assigned a value that is never read,
it is being re-assigned a new value in the following code block.
The assignment is redundant and can be removed.
Cleans up clang scan build warning:
fs/ext4/extents.c:3371:2: warning: Value stored to 'split_flag1' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220301121644.997833-1-colin.i.king@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
when ext4 filesystem is created with 64k block size, ^extent and
^huge_file features. the upper_limit would underflow during the
computations in ext4_max_bitmap_size(). The problem is the size of block
index tree for such large block size is more than i_blocks can carry.
So fix the computation to count with this possibility. After this fix,
the 'res' cannot overflow loff_t on the extreme case of filesystem with
huge_files and 64K block size, so this patch also revert commit
75ca6ad408 ("ext4: fix loff_t overflow in ext4_max_bitmap_size()").
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220301111704.2153829-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the excess description of @bh in ext4_mb_clear_bb() kernel-doc
comment to remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.
fs/ext4/mballoc.c:5895: warning: Excess function parameter 'bh'
description in 'ext4_mb_clear_bb'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220301092136.34764-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We inject IO error when rmdir non empty direcory, then got issue as follows:
step1: mkfs.ext4 -F /dev/sda
step2: mount /dev/sda test
step3: cd test
step4: mkdir -p 1/2
step5: rmdir 1
[ 110.920551] ext4_empty_dir: inject fault
[ 110.921926] EXT4-fs warning (device sda): ext4_rmdir:3113: inode #12:
comm rmdir: empty directory '1' has too many links (3)
step6: cd ..
step7: umount test
step8: fsck.ext4 -f /dev/sda
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Entry '..' in .../??? (13) has deleted/unused inode 12. Clear<y>? yes
Pass 3: Checking directory connectivity
Unconnected directory inode 13 (...)
Connect to /lost+found<y>? yes
Pass 4: Checking reference counts
Inode 13 ref count is 3, should be 2. Fix<y>? yes
Pass 5: Checking group summary information
/dev/sda: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda: 12/131072 files (0.0% non-contiguous), 26157/524288 blocks
ext4_rmdir
if (!ext4_empty_dir(inode))
goto end_rmdir;
ext4_empty_dir
bh = ext4_read_dirblock(inode, 0, DIRENT_HTREE);
if (IS_ERR(bh))
return true;
Now if read directory block failed, 'ext4_empty_dir' will return true, assume
directory is empty. Obviously, it will lead to above issue.
To solve this issue, if read directory block failed 'ext4_empty_dir' just
return false. To avoid making things worse when file system is already
corrupted, 'ext4_empty_dir' also return false.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20220228024815.3952506-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Refactor the readpage code to pass the op to bio_alloc instead of setting
it just before the submission.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20220222154634.597067-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds an extra checks in ext4_mb_mark_bb() function
to make sure we mark & report error if we were to mark/clear any
of the critical FS metadata specific bitmaps (&bail out) to prevent
from any accidental corruption.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/53cbb6f2573db162a57f935365050d8b1df202ee.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_mb_clear_bb() & ext4_group_add_blocks() only checks
whether the given block ranges (which is to be freed) belongs to any FS
metadata blocks or not, of the block's respective block group.
But to detect any FS error early, it is better to add more strict
checkings in those functions which checks whether the given blocks
belongs to any critical FS metadata or not within system-zone.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/ddd9143d064774e32d6364a99667817c6e8bfdc0.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_set_bits() should actually be mb_set_bits() for uniform API naming
convention.
This is via below cmd -
grep -nr "ext4_set_bits" fs/ext4/ | cut -d ":" -f 1 | xargs sed -i 's/ext4_set_bits/mb_set_bits/g'
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f1f6ece1405b76a7a987e9145d1adfaf71e30695.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_free_blocks() function became too long and confusing, this patch
just pulls out the ext4_mb_clear_bb() function logic from it
which clears the block bitmap and frees it.
No functionality change in this patch
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/22c30fbb26ba409cf8aa5f0c7912970272c459e8.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In case of flex_bg feature (which is by default enabled), extents for
any given inode might span across blocks from two different block group.
ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
starting block group, but it fails to read it again when the extent length
boundary overflows to another block group. Then in this below loop it
accesses memory beyond the block group bitmap buffer_head and results
into a data abort.
for (i = 0; i < clen; i++)
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
This patch adds this functionality for checking block group boundary in
ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
block group.
w/o this patch, I was easily able to hit a data access abort using Power platform.
<...>
[ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters
[ 74.533214] EXT4-fs (loop3): shut down requested (2)
[ 74.536705] Aborting journal on device loop3-8.
[ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000
[ 74.703727] Faulting instruction address: 0xc0000000007bffb8
cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060]
pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0
lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0
sp: c000000015db7300
msr: 800000000280b033
dar: c00000005e980000
dsisr: 40000000
current = 0xc000000027af6880
paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01
pid = 5167, comm = mount
<...>
enter ? for help
[c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410
[c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000
[c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0
[c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0
[c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0
[c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10
[c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350
[c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40
[c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100
[c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70
[c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550
[c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0
[c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/2609bc8f66fc15870616ee416a18a3d392a209c4.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_mark_bb() currently wrongly calculates cluster len (clen) and
flex_group->free_clusters. This patch fixes that.
Identified based on code review of ext4_mb_mark_bb() function.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a0b035d536bafa88110b74456853774b64c8ac40.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 6e47a3cc68 ("ext4: get rid of super block and sbi from
handle_mount_ops()") the 'abort' options stopped working. This is
because we're using ctx_set_mount_flags() helper that's expecting an
argument with the appropriate bit set, but instead got
EXT4_MF_FS_ABORTED which is a bit position. ext4_set_mount_flag() is
using set_bit() while ctx_set_mount_flags() was using bitwise OR.
Create a separate helper ctx_set_mount_flag() to handle setting the
mount_flags correctly.
While we're at it clean up the EXT4_SET_CTX macros so that we're only
creating helpers that we actually use to avoid warnings.
Fixes: 6e47a3cc68 ("ext4: get rid of super block and sbi from handle_mount_ops()")
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Ye Bin <yebin10@huawei.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20220201131345.77591-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Encrypted files traditionally haven't supported DIO, due to the need to
encrypt/decrypt the data. However, when the encryption is implemented
using inline encryption (blk-crypto) instead of the traditional
filesystem-layer encryption, it is straightforward to support DIO.
Therefore, make ext4 support DIO on files that are using inline
encryption. Since ext4 uses iomap for DIO, and fscrypt support was
already added to iomap DIO, this just requires two small changes:
- Let DIO proceed when supported, by checking fscrypt_dio_supported()
instead of assuming that encrypted files never support DIO.
- In ext4_iomap_begin(), use fscrypt_limit_io_blocks() to limit the
length of the mapping in the rare case where a DUN discontiguity
occurs in the middle of an extent. The iomap DIO implementation
requires this, since it assumes that it can submit a bio covering (up
to) the whole mapping, without checking fscrypt constraints itself.
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/r/20220128233940.79464-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fix regression introduced as part of moving to the new mount API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmH7/AUACgkQ8vlZVpUN
gaOsuQf/TFH8QNBSeEkT5ybnrS51KGTv88mdUVMcsmSMhmAFxiGJLFtMLFu9LG7b
bJYCg+Q9Rieb1qqqtGNyLe4p3ewShSzBFu8p7hzKMfu0EEcrJwTYVywSX0oYhMMm
9o+V6CPcGYVZtImihdsmDvgMRRkzoevHQFx+OLhkaq4Qd9ZEdohchYIhRFNXwd+w
CJiL0TFAnrb4QfWgtq3HyY7aoQumf8YI15C+RTfykzCBhZRFRKXjVXPdIjfGe4O2
Fpjr4gSsgYK0Er0LLJvESeFFVpFz+NV7q9W/Vj5ahaKJDpiVGzL/OPZsnafzHPPy
CSa+iP3ZLcTb+KRTOZ1mgjvS34Cmyw==
=DpdZ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
should not use fast commit log data directly, add le32_to_cpu().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 0b5b5a62b9 ("ext4: use ext4_ext_remove_space() for fast commit replay delete range")
Cc: stable@kernel.org
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220126063146.2302-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
By mistake we fail to return an error from ext4_fill_super() in case
that ext4_alloc_sbi() fails to allocate a new sbi. Instead we just set
the ret variable and allow the function to continue which will later
lead to a NULL pointer dereference. Fix it by returning -ENOMEM in the
case ext4_alloc_sbi() fails.
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220119130209.40112-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Current code does not fully takes care of krealloc() error case, which
could lead to silent memory corruption or a kernel bug. This patch
fixes that.
Also it cleans up some duplicated error handling logic from various
functions in fast_commit.c file.
Reported-by: luo penghao <luo.penghao@zte.com.cn>
Suggested-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/62e8b6a1cce9359682051deb736a3c0953c9d1e9.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
ext4_prepare_inline_data() already checks for ext4_get_max_inline_size()
and returns -ENOSPC. So there is no need to check it twice within
ext4_da_write_inline_data_begin(). This patch removes the extra check.
It also makes it more clean.
No functionality change in this patch.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/cdd1654128d5105550c65fd13ca5da53b2162cc4.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
While running "./check -I 200 generic/475" it sometimes gives below
kernel BUG(). Ideally we should not call ext4_write_inline_data() if
ext4_create_inline_data() has failed.
<log snip>
[73131.453234] kernel BUG at fs/ext4/inline.c:223!
<code snip>
212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc,
213 void *buffer, loff_t pos, unsigned int len)
214 {
<...>
223 BUG_ON(!EXT4_I(inode)->i_inline_off);
224 BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);
This patch handles the error and prints out a emergency msg saying potential
data loss for the given inode (since we couldn't restore the original
inline_data due to some previous error).
[ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30)
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
in the follow scenario:
1. jbd start transaction n
2. task A get new handle for transaction n+1
3. task A do some actions and add inode to FC_Q_MAIN fc_q
4. jbd complete transaction n and clear FC_Q_MAIN fc_q
5. task A call fsync
Fast commit will lost the file actions during a full commit.
we should also add updates to staging queue during a full commit.
and in ext4_fc_cleanup(), when reset a inode's fc track range, check
it's i_sync_tid, if it bigger than current transaction tid, do not
rest it, or we will lost the track range.
And EXT4_MF_FC_COMMITTING is not needed anymore, so drop it.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220117093655.35160-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
For the follow scenario:
1. jbd start commit transaction n
2. task A get new handle for transaction n+1
3. task A do some ineligible actions and mark FC_INELIGIBLE
4. jbd complete transaction n and clean FC_INELIGIBLE
5. task A call fsync
In this case fast commit will not fallback to full commit and
transaction n+1 also not handled by jbd.
Make ext4_fc_mark_ineligible() also record transaction tid for
latest ineligible case, when call ext4_fc_cleanup() check
current transaction tid, if small than latest ineligible tid
do not clear the EXT4_MF_FC_INELIGIBLE.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Suggested-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
For now in ext4_mb_new_blocks_simple, if we found a block which
should be excluded then will switch to next group, this may
probably cause 'group' run out of range.
Change to check next block in the same group when get a block should
be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP
and add error checking.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20220110035141.1980-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
During fast commit replay procedure, we clear inode blocks bitmap in
ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate
blocks still in use.
Make ext4_fc_record_regions() also record physical disk regions used by
inodes during replay procedure. Then ext4_mb_new_blocks_simple() can
excludes these blocks in use.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220110035141.1980-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
previous CONFIG_UNICODE. It is -rc material since we don't want to
expose the former symbol on 5.17.
This has been living on linux-next for the past week.
-----BEGIN PGP SIGNATURE-----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=YVNN
-----END PGP SIGNATURE-----
Merge tag 'unicode-for-next-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode cleanup from Gabriel Krisman Bertazi:
"A fix from Christoph Hellwig merging the CONFIG_UNICODE_UTF8_DATA into
the previous CONFIG_UNICODE. It is -rc material since we don't want to
expose the former symbol on 5.17.
This has been living on linux-next for the past week"
* tag 'unicode-for-next-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: clean up the Kconfig symbol confusion
Patch series "remove Xen tmem leftovers".
Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap. This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.
This patch (of 13):
The cleancache subsystem is unused since the removal of Xen tmem driver
in commit 814bbf49dc ("xen: remove tmem driver").
[akpm@linux-foundation.org: remove now-unreachable code]
Link: https://lkml.kernel.org/r/20211224062246.1258487-1-hch@lst.de
Link: https://lkml.kernel.org/r/20211224062246.1258487-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove PDE_DATA() completely and replace it with pde_data().
[akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c]
[akpm@linux-foundation.org: now fix it properly]
Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Turn the CONFIG_UNICODE symbol into a tristate that generates some always
built in code and remove the confusing CONFIG_UNICODE_UTF8_DATA symbol.
Note that a lot of the IS_ENABLED() checks could be turned from cpp
statements into normal ifs, but this change is intended to be fairly
mechanic, so that should be cleaned up later.
Fixes: 2b3d047870 ("unicode: Add utf8-data module")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
This includes patches from Christoph Hellwig to split the large data
tables of the unicode subsystem into a loadable module, which allow
users to not have them around if case-insensitive filesystems are not to
be used. It also includes minor code fixes to unicode and its users,
from the same author.
There is a trivial conflict in the function encoding_show in
fs/f2fs/sysfs.c reported by linux-next between commit
84eab2a899 ("f2fs: replace snprintf in show functions with sysfs_emit")
and commit a440943e68 ("unicode: remove the charset field from struct
unicode_map"). from my tree.
All the patches here have been on linux-next releases for the past
months.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
-----BEGIN PGP SIGNATURE-----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=4q9x
-----END PGP SIGNATURE-----
Merge tag 'unicode-for-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode updates from Gabriel Krisman Bertazi:
"This includes patches from Christoph Hellwig to split the large data
tables of the unicode subsystem into a loadable module, which allow
users to not have them around if case-insensitive filesystems are not
to be used. It also includes minor code fixes to unicode and its
users, from the same author.
All the patches here have been on linux-next releases for the past
months"
* tag 'unicode-for-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: only export internal symbols for the selftests
unicode: Add utf8-data module
unicode: cache the normalization tables in struct unicode_map
unicode: move utf8cursor to utf8-selftest.c
unicode: simplify utf8len
unicode: remove the unused utf8{,n}age{min,max} functions
unicode: pass a UNICODE_AGE() tripple to utf8_load
unicode: mark the version field in struct unicode_map unsigned
unicode: remove the charset field from struct unicode_map
f2fs: simplify f2fs_sb_read_encoding
ext4: simplify ext4_sb_read_encoding
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
Various places in the kernel - largely in filesystems - respond to a
memory allocation failure by looping around and re-trying. Some of
these cannot conveniently use __GFP_NOFAIL, for reasons such as:
- a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on
- a need to check for the process being signalled between failures
- the possibility that other recovery actions could be performed
- the allocation is quite deep in support code, and passing down an
extra flag to say if __GFP_NOFAIL is wanted would be clumsy.
Many of these currently use congestion_wait() which (in almost all
cases) simply waits the given timeout - congestion isn't tracked for
most devices.
It isn't clear what the best delay is for loops, but it is clear that
the various filesystems shouldn't be responsible for choosing a timeout.
This patch introduces memalloc_retry_wait() with takes on that
responsibility. Code that wants to retry a memory allocation can call
this function passing the GFP flags that were used. It will wait
however is appropriate.
For now, it only considers __GFP_NORETRY and whatever
gfpflags_allow_blocking() tests. If blocking is allowed without
__GFP_NORETRY, then alloc_page either made some reclaim progress, or
waited for a while, before failing. So there is no need for much
further waiting. memalloc_retry_wait() will wait until the current
jiffie ends. If this condition is not met, then alloc_page() won't have
waited much if at all. In that case memalloc_retry_wait() waits about
200ms. This is the delay that most current loops uses.
linux/sched/mm.h needs to be included in some files now,
but linux/backing-dev.h does not.
Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Simplify the dax_operations API
- Eliminate bdev_dax_pgoff() in favor of the filesystem maintaining
and applying a partition offset to all its DAX iomap operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api
Tags offered after the branch was cut:
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/Ydb/3P+8nvjCjYfO@redhat.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYd3dTAAKCRDfioYZHlFs
Z//UAP9zetoTE+O7zJG7CXja4jSopSadbdbh6QKSXaqfKBPvQQD+N4US3wA2bGv8
f/qCY62j2Hj3hUTGHs9RvTyw3JsSYAA=
=QvDs
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax and libnvdimm updates from Dan Williams:
"The bulk of this is a rework of the dax_operations API after
discovering the obstacles it posed to the work-in-progress DAX+reflink
support for XFS and other copy-on-write filesystem mechanics.
Primarily the need to plumb a block_device through the API to handle
partition offsets was a sticking point and Christoph untangled that
dependency in addition to other cleanups to make landing the
DAX+reflink support easier.
The DAX_PMEM_COMPAT option has been around for 4 years and not only
are distributions shipping userspace that understand the current
configuration API, but some are not even bothering to turn this option
on anymore, so it seems a good time to remove it per the deprecation
schedule. Recall that this was added after the device-dax subsystem
moved from /sys/class/dax to /sys/bus/dax for its sysfs organization.
All recent functionality depends on /sys/bus/dax.
Some other miscellaneous cleanups and reflink prep patches are
included as well.
Summary:
- Simplify the dax_operations API:
- Eliminate bdev_dax_pgoff() in favor of the filesystem
maintaining and applying a partition offset to all its DAX iomap
operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api"
* tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits)
iomap: Fix error handling in iomap_zero_iter()
ACPI: NFIT: Import GUID before use
dax: remove the copy_from_iter and copy_to_iter methods
dax: remove the DAXDEV_F_SYNC flag
dax: simplify dax_synchronous and set_dax_synchronous
uio: remove copy_from_iter_flushcache() and copy_mc_to_iter()
iomap: turn the byte variable in iomap_zero_iter into a ssize_t
memremap: remove support for external pgmap refcounts
fsdax: don't require CONFIG_BLOCK
iomap: build the block based code conditionally
dax: fix up some of the block device related ifdefs
fsdax: shift partition offset handling into the file systems
dax: return the partition offset from fs_dax_get_by_bdev
iomap: add a IOMAP_DAX flag
xfs: pass the mapping flags to xfs_bmbt_to_iomap
xfs: use xfs_direct_write_iomap_ops for DAX zeroing
xfs: move dax device handling into xfs_{alloc,free}_buftarg
ext4: cleanup the dax handling in ext4_fill_super
ext2: cleanup the dax handling in ext2_fill_super
fsdax: decouple zeroing from the iomap buffered I/O code
...
We probably want to remove the indirect block to extents migration
feature after a deprecation window, but until then, let's fix a
potential data loss problem caused by the fact that we put the
tmp_inode on the orphan list. In the unlikely case where we crash and
do a journal recovery, the data blocks belonging to the inode being
migrated are also represented in the tmp_inode on the orphan list ---
and so its data blocks will get marked unallocated, and available for
reuse.
Instead, stop putting the tmp_inode on the oprhan list. So in the
case where we crash while migrating the inode, we'll leak an inode,
which is not a disaster. It will be easily fixed the next time we run
fsck, and it's better than potentially having blocks getting claimed
by two different files, and losing data as a result.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@kernel.org
BUG_ON would be better.
This issue was detected with the help of Coccinelle.
Reported-by: Zeal robot <zealci@zte.com.cn>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Link: https://lore.kernel.org/r/20211228073252.580296-1-xu.xin16@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This was obviously supposed to be an ext4 struct, not xfs. GCC
doesn't care either way so it doesn't affect the build or runtime.
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20211215114309.GB14552@kili
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When migrating to extents, the temporary inode will have it's own checksum
seed. This means that, when swapping the inodes data, the inode checksums
will be incorrect.
This can be fixed by recalculating the extents checksums again. Or simply
by copying the seed into the temporary inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357
Reported-by: Jeroen van Wolffelaar <jeroen@wolffelaar.nl>
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20211214175058.19511-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Although it is in the loop, offset is reassigned at the beginning of the
while loop. And after the loop, the value will not be used
The clang_analyzer complains as follows:
fs/ext4/dir.c:306:3 warning:
Value stored to 'offset' is never read
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211208075307.404703-1-luo.penghao@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The if will goto out of the loop, and until the end of the
function execution, o_start will not be used again.
The clang_analyzer complains as follows:
fs/ext4/move_extent.c:635:5 warning:
Value stored to 'o_start' is never read
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211208075157.404535-1-luo.penghao@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT_FIRST_INDEX(ptr) is ptr+12, which can't possibly be null; gcc-12
warns about this.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20211115172020.57853-1-kilobyte@angband.pl
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The eh assignment in these two places is meaningless, because the
function will goto to merge, which will not use eh.
The clang_analyzer complains as follows:
fs/ext4/extents.c:1988:4 warning:
fs/ext4/extents.c:2016:4 warning:
Value stored to 'eh' is never read
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211104064007.2919-1-luo.penghao@zte.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The local variable assignment at the end of the function is meaningless.
The clang_analyzer complains as follows:
fs/ext4/fast_commit.c:779:2 warning:
Value stored to 'dst' is never read
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211104063406.2747-1-luo.penghao@zte.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The command "make clang-analyzer" detects dead stores in
mpage_process_page() function.
Do not reset io_end_size to 0 in the current paths, as the function
exits on those paths without further using io_end_size.
Signed-off-by: Nghia Le <nghialm78@gmail.com>
Link: https://lore.kernel.org/r/20211025221803.3326-1-nghialm78@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 has an optimization mechanism for batched disacrd (FITRIM) that
should help speed up subsequent calls of FITRIM ioctl by skipping the
groups that were previously trimmed. However because the FITRIM allows
to set the minimum size of an extent to trim, ext4 stores the last
minimum extent size and only avoids trimming the group if it was
previously trimmed with minimum extent size equal to, or smaller than
the current call.
There is currently no way to bypass the optimization without
umount/mount cycle. This becomes a problem when the file system is
live migrated to a different storage, because the optimization will
prevent possibly useful discard calls to the storage.
Fix it by exporting the s_last_trim_minblks via sysfs interface which
will allow us to set the minimum size to the number of blocks larger
than subsequent FITRIM call, effectively bypassing the optimization.
By setting the s_last_trim_minblks to ULONG_MAX the optimization will be
effectively cleared regardless of the previous state, or file system
configuration.
For example:
getconf ULONG_MAX > /sys/fs/ext4/dm-1/last_trim_minblks
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Laurent GUERBY <laurent@guerby.net>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20211103145122.17338-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no good reason for the s_last_trim_minblks to be atomic. There is
no data integrity needed and there is no real danger in setting and
reading it in a racy manner. Change it to be unsigned long, the same type
as s_clusters_per_group which is the maximum that's allowed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20211103145122.17338-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Implement support for FS_IOC_GETFSLABEL and FS_IOC_SETFSLABEL ioctls for
online reading and setting of file system label.
ext4_ioctl_getlabel() is simple, just get the label from the primary
superblock. This might not be the first sb on the file system if
'sb=' mount option is used.
In ext4_ioctl_setlabel() we update what ext4 currently views as a
primary superblock and then proceed to update backup superblocks. There
are two caveats:
- the primary superblock might not be the first superblock and so it
might not be the one used by userspace tools if read directly
off the disk.
- because the primary superblock might not be the first superblock we
potentialy have to update it as part of backup superblock update.
However the first sb location is a bit more complicated than the rest
so we have to account for that.
The superblock modification is created generic enough so the
infrastructure can be used for other potential superblock modification
operations, such as chaning UUID.
Tested with generic/492 with various configurations. I also checked the
behavior with 'sb=' mount options, including very large file systems
with and without sparse_super/sparse_super2.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20211213135618.43303-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Only set EXT4_MOUNT_QUOTA when journalled quota file is specified,
otherwise simply disabling specific quota type (usrjquota=) will also
set the EXT4_MOUNT_QUOTA super block option.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Fixes: e6e268cb68 ("ext4: move quota configuration out of handle_mount_opt()")
Link: https://lore.kernel.org/r/20220104143518.134465-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During ext4 mount api rework the commit e6e268cb68 ("ext4: move quota
configuration out of handle_mount_opt()") introduced a bug where we
would kfree(sbi->s_qf_names[i]) before assigning the new quota name in
ext4_apply_quota_options().
This is wrong because we're using kfree() on rcu prointer that could be
simultaneously accessed from ext4_show_quota_options() during remount.
Fix it by using rcu_replace_pointer() to replace the old qname with the
new one and then kfree_rcu() the old quota name.
Also use get_qf_name() instead of sbi->s_qf_names in strcmp() to silence
the sparse warning.
Fixes: e6e268cb68 ("ext4: move quota configuration out of handle_mount_opt()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220104143518.134465-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason. After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.
CC: Lukas Czerner <lczerner@redhat.com>
Fixes: 5c2ed62fd4 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Our syzkaller report an use-after-free issue that accessing the freed
buffer_head on the writeback page in __ext4_journalled_writepage(). The
problem is that if there was a truncate racing with the data=journalled
writeback procedure, the writeback length could become zero and
bget_one() refuse to get buffer_head's refcount, then the truncate
procedure release buffer once we drop page lock, finally, the last
ext4_walk_page_buffers() trigger the use-after-free problem.
sync truncate
ext4_sync_file()
file_write_and_wait_range()
ext4_setattr(0)
inode->i_size = 0
ext4_writepage()
len = 0
__ext4_journalled_writepage()
page_bufs = page_buffers(page)
ext4_walk_page_buffers(bget_one) <- does not get refcount
do_invalidatepage()
free_buffer_head()
ext4_walk_page_buffers(page_bufs) <- trigger use-after-free
After commit bdf96838ae ("ext4: fix race between truncate and
__ext4_journalled_writepage()"), we have already handled the racing
case, so the bget_one() and bput_one() are not needed. So this patch
simply remove these hunk, and recheck the i_size to make it safe.
Fixes: bdf96838ae ("ext4: fix race between truncate and __ext4_journalled_writepage()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211225090937.712867-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
