An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90rNwAKCRCRxhvAZXjc
onBJAP9Z8Ywmlb5KQ1E3HvDmkwyY6yOSyZ9/CmbzrkCJ8ywYkQD/d9/xt0EP/O/q
N8YtzXArHWt7u0YbcVpy9WK3F72BdwU=
=VJgY
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs async dir updates from Christian Brauner:
"This contains cleanups that fell out of the work from async directory
handling:
- Change kern_path_locked() and user_path_locked_at() to never return
a negative dentry. This simplifies the usability of these helpers
in various places
- Drop d_exact_alias() from the remaining place in NFS where it is
still used. This also allows us to drop the d_exact_alias() helper
completely
- Drop an unnecessary call to fh_update() from nfsd_create_locked()
- Change i_op->mkdir() to return a struct dentry
Change vfs_mkdir() to return a dentry provided by the filesystems
which is hashed and positive. This allows us to reduce the number
of cases where the resulting dentry is not positive to very few
cases. The code in these places becomes simpler and easier to
understand.
- Repack DENTRY_* and LOOKUP_* flags"
* tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: fix inline emphasis warning
VFS: Change vfs_mkdir() to return the dentry.
nfs: change mkdir inode_operation to return alternate dentry if needed.
fuse: return correct dentry for ->mkdir
ceph: return the correct dentry on mkdir
hostfs: store inode in dentry after mkdir if possible.
Change inode_operations.mkdir to return struct dentry *
nfsd: drop fh_update() from S_IFDIR branch of nfsd_create_locked()
nfs/vfs: discard d_exact_alias()
VFS: add common error checks to lookup_one_qstr_excl()
VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry
VFS: repack LOOKUP_ bit flags.
VFS: repack DENTRY_ flags.
Add a check for invalid data size to avoid corrupted filesystem
from being further corrupted.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
This commit fixes the condition for allocating cluster to parent
directory to avoid allocating new cluster to parent directory when
there are just enough empty directory entries at the end of the
parent directory.
Fixes: af02c72d0b ("exfat: convert exfat_find_empty_entry() to use dentry cache")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Some filesystems, such as NFS, cifs, ceph, and fuse, do not have
complete control of sequencing on the actual filesystem (e.g. on a
different server) and may find that the inode created for a mkdir
request already exists in the icache and dcache by the time the mkdir
request returns. For example, if the filesystem is mounted twice the
directory could be visible on the other mount before it is on the
original mount, and a pair of name_to_handle_at(), open_by_handle_at()
calls could instantiate the directory inode with an IS_ROOT() dentry
before the first mkdir returns.
This means that the dentry passed to ->mkdir() may not be the one that
is associated with the inode after the ->mkdir() completes. Some
callers need to interact with the inode after the ->mkdir completes and
they currently need to perform a lookup in the (rare) case that the
dentry is no longer hashed.
This lookup-after-mkdir requires that the directory remains locked to
avoid races. Planned future patches to lock the dentry rather than the
directory will mean that this lookup cannot be performed atomically with
the mkdir.
To remove this barrier, this patch changes ->mkdir to return the
resulting dentry if it is different from the one passed in.
Possible returns are:
NULL - the directory was created and no other dentry was used
ERR_PTR() - an error occurred
non-NULL - this other dentry was spliced in
This patch only changes file-systems to return "ERR_PTR(err)" instead of
"err" or equivalent transformations. Subsequent patches will make
further changes to some file-systems to return a correct dentry.
Not all filesystems reliably result in a positive hashed dentry:
- NFS, cifs, hostfs will sometimes need to perform a lookup of
the name to get inode information. Races could result in this
returning something different. Note that this lookup is
non-atomic which is what we are trying to avoid. Placing the
lookup in filesystem code means it only happens when the filesystem
has no other option.
- kernfs and tracefs leave the dentry negative and the ->revalidate
operation ensures that lookup will be called to correctly populate
the dentry. This could be fixed but I don't think it is important
to any of the users of vfs_mkdir() which look at the dentry.
The recommendation to use
d_drop();d_splice_alias()
is ugly but fits with current practice. A planned future patch will
change this.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-2-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Most of the filesystem methods where we care about dentry name
and parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for
expected name and expected parent of the dentry being
validated. That kills quite a bit of boilerplate in
->d_revalidate() instances, along with a bunch of races
where they used to access ->d_name without sufficient
precautions.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ5gkoQAKCRBZ7Krx/gZQ
6w9FAP4nyxNNWMjE1TwuWR/DNDMYYuw/qn/miZ88B5BUM8hzqgD/W2SjRvcbSaIm
xSIYpbtKgtqNU34P1PU+dBvL8Utz2AE=
=TWY8
-----END PGP SIGNATURE-----
Merge tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_revalidate updates from Al Viro:
"Provide stable parent and name to ->d_revalidate() instances
Most of the filesystem methods where we care about dentry name and
parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for expected name
and expected parent of the dentry being validated. That kills quite a
bit of boilerplate in ->d_revalidate() instances, along with a bunch
of races where they used to access ->d_name without sufficient
precautions"
* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: fix ->rename_sem exclusion
orangefs_d_revalidate(): use stable parent inode and name passed by caller
ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
nfs: fix ->d_revalidate() UAF on ->d_name accesses
nfs{,4}_lookup_validate(): use stable parent inode passed by caller
gfs2_drevalidate(): use stable parent inode and name passed by caller
fuse_dentry_revalidate(): use stable parent inode and name passed by caller
vfat_revalidate{,_ci}(): use stable parent inode passed by caller
exfat_d_revalidate(): use stable parent inode passed by caller
fscrypt_d_revalidate(): use stable parent inode passed by caller
ceph_d_revalidate(): propagate stable name down into request encoding
ceph_d_revalidate(): use stable parent inode passed by caller
afs_d_revalidate(): use stable name and parent inode passed by caller
Pass parent directory inode and expected name to ->d_revalidate()
generic_ci_d_compare(): use shortname_storage
ext4 fast_commit: make use of name_snapshot primitives
dissolve external_name.u into separate members
make take_dentry_name_snapshot() lockless
dcache: back inline names with a struct-wrapped array of unsigned long
make sure that DNAME_INLINE_LEN is a multiple of word size
... no need to bother with ->d_lock and ->d_parent->d_inode.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->d_revalidate() often needs to access dentry parent and name; that has
to be done carefully, since the locking environment varies from caller
to caller. We are not guaranteed that dentry in question will not be
moved right under us - not unless the filesystem is such that nothing
on it ever gets renamed.
It can be dealt with, but that results in boilerplate code that isn't
even needed - the callers normally have just found the dentry via dcache
lookup and want to verify that it's in the right place; they already
have the values of ->d_parent and ->d_name stable. There is a couple
of exceptions (overlayfs and, to less extent, ecryptfs), but for the
majority of calls that song and dance is not needed at all.
It's easier to make ecryptfs and overlayfs find and pass those values if
there's a ->d_revalidate() instance to be called, rather than doing that
in the instances.
This commit only changes the calling conventions; making use of supplied
values is left to followups.
NOTE: some instances need more than just the parent - things like CIFS
may need to build an entire path from filesystem root, so they need
more precautions than the usual boilerplate. This series doesn't
do anything to that need - these filesystems have to keep their locking
mechanisms (rename_lock loops, use of dentry_path_raw(), private rwsem
a-la v9fs).
One thing to keep in mind when using name is that name->name will normally
point into the pathname being resolved; the filename in question occupies
name->len bytes starting at name->name, and there is NUL somewhere after it,
but it the next byte might very well be '/' rather than '\0'. Do not
ignore name->len.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On failure, "dentry" is the error code. If the error code indicates
that there is no space, a new cluster may need to be allocated; for
other errors, it should be returned directly.
Only on success, "dentry" is the index of the directory entry, and
it needs to be converted into the directory entry index within the
cluster where it is located.
Fixes: 8a3f5711ad ("exfat: reduce FAT chain traversal")
Reported-by: syzbot+6f6c9397e0078ef60bce@syzkaller.appspotmail.com
Tested-by: syzbot+6f6c9397e0078ef60bce@syzkaller.appspotmail.com
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Before this commit, ->dir and ->entry of exfat_inode_info record the
first cluster of the parent directory and the directory entry index
starting from this cluster.
The directory entry set will be gotten during write-back-inode/rmdir/
unlink/rename. If the clusters of the parent directory are not
continuous, the FAT chain will be traversed from the first cluster of
the parent directory to find the cluster where ->entry is located.
After this commit, ->dir records the cluster where the first directory
entry in the directory entry set is located, and ->entry records the
directory entry index in the cluster, so that there is almost no need
to access the FAT when getting the directory entry set.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The output of argument 'p_dir' of exfat_add_entry() is not used
in either exfat_mkdir() or exfat_create(), remove the argument.
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
__exfat_resolve_path() mixes two functions. The first one is to
resolve and check if the path is valid. The second one is to output
the cluster assigned to the directory.
The second one is only needed when need to traverse the directory
entries, and calling exfat_chain_set() so early causes p_dir to be
passed as an argument multiple times, increasing the complexity of
the code.
This commit moves the call to exfat_chain_set() before traversing
directory entries.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
This helper gets the directory entry set of the file for the exfat
inode which has been created.
It's used to remove all the instances of the pattern it replaces
making the code cleaner, it's also a preparation for changing ->dir
to record the cluster where the directory entry set is located and
changing ->entry to record the index of the directory entry within
the cluster.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In this exfat implementation, the relationship between inode and ei
is ei=EXFAT_I(inode). However, in the arguments of exfat_move_file()
and exfat_rename_file(), argument 'inode' indicates the parent
directory, but argument 'ei' indicates the target file to be renamed.
They do not have the above relationship, which is not friendly to code
readers.
So this commit renames 'inode' to 'parent_inode', making the argument
name match its role.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
To determine whether it is a directory, there is no need to read its
directory entry, just use S_ISDIR(inode->i_mode).
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
There is no check if stream size and start_clu are invalid.
If start_clu is EOF cluster and stream size is 4096, It will
cause uninit value access. because ei->hint_femp.eidx could
be 128(if cluster size is 4K) and wrong hint will allocate
next cluster. and this cluster will be same with the cluster
that is allocated by exfat_extend_valid_size(). The previous
patch will check invalid start_clu, but for clarity, initialize
hint_femp.eidx to zero.
Cc: stable@vger.kernel.org
Reported-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Tested-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In the case of the directory size is greater than or equal to
the cluster size, if start_clu becomes an EOF cluster(an invalid
cluster) due to file system corruption, then the directory entry
where ei->hint_femp.eidx hint is outside the directory, resulting
in an out-of-bounds access, which may cause further file system
corruption.
This commit adds a check for start_clu, if it is an invalid cluster,
the file or directory will be treated as empty.
Cc: stable@vger.kernel.org
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Co-developed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
We found that when writing a large file through buffer write, if the
disk is inaccessible, exFAT does not return an error normally, which
leads to the writing process not stopping properly.
To easily reproduce this issue, you can follow the steps below:
1. format a device to exFAT and then mount (with a full disk erase)
2. dd if=/dev/zero of=/exfat_mount/test.img bs=1M count=8192
3. eject the device
You may find that the dd process does not stop immediately and may
continue for a long time.
The root cause of this issue is that during buffer write process,
exFAT does not need to access the disk to look up directory entries
or the FAT table (whereas FAT would do) every time data is written.
Instead, exFAT simply marks the buffer as dirty and returns,
delegating the writeback operation to the writeback process.
If the disk cannot be accessed at this time, the error will only be
returned to the writeback process, and the original process will not
receive the error, so it cannot be returned to the user side.
When the disk cannot be accessed normally, an error should be returned
to stop the writing process.
Implement sops->shutdown and ioctl to shut down the file system
when underlying block device is marked dead.
Signed-off-by: Dongliang Cui <dongliang.cui@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
After commit(11a347fb6c exfat: change to get file size from
DataLength), the remaining area or hole had been filled with
zeros before calling exfat_direct_IO(), so there is no need to
fallback to buffered write, and ->i_size_aligned is no longer
needed, drop it.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
->i_size_ondisk is no longer used by exfat_write_begin() after
commit(11a347fb6c exfat: change to get file size from DataLength),
drop it.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
For renaming, the directory only needs to be updated once if it
is in the same directory.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When sync or dir_sync is enabled, there is no need to sync the
parent directory's inode if only for updating its timestamp.
1. If an unexpected power failure occurs, the timestamp of the
parent directory is not updated to the storage, which has no
impact on the user.
2. The number of writes will be greatly reduced, which can not
only improve performance, but also prolong device life.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Before this conversion, each dentry traversed needs to be read
from the storage device or page cache. There are at least 16
dentries in a sector. This will result in frequent page cache
searches.
After this conversion, if all directory entries in a sector are
used, the sector only needs to be read once.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Before this conversion, in exfat_init_ext_entry(), to init
the dentries in a dentry set, the sync times is equals the
dentry number if 'dirsync' or 'sync' is enabled.
That affects not only performance but also device life.
After this conversion, only needs to be synchronized once if
'dirsync' or 'sync' is enabled.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
exfat_init_ext_entry() is an init function, it's a bit strange
to free cluster in it. And the argument 'inode' will be removed
from exfat_init_ext_entry(). So this commit changes to free the
cluster in exfat_remove_entries().
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Before this conversion, in exfat_remove_entries(), to mark the
dentries in a dentry set as deleted, the sync times is equals
the dentry numbers if 'dirsync' or 'sync' is enabled.
That affects not only performance but also device life.
After this conversion, only needs to be synchronized once if
'dirsync' or 'sync' is enabled.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
After this conversion, if "dirsync" or "sync" is enabled, the
number of synchronized dentries in exfat_add_entry() will change
from 2 to 1.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In stream extension directory entry, the ValidDataLength
field describes how far into the data stream user data has
been written, and the DataLength field describes the file
size.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
This commit adds mount option 'zero_size_dir'. If this option
enabled, don't allocate a cluster to directory when creating
it, and set the directory size to 0.
On Windows, a cluster is allocated for a directory when it is
created, so the mount option is disabled by default.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
After repairing a corrupted file system with exfatprogs' fsck.exfat,
zero-size directories may result. It is also possible to create
zero-size directories in other exFAT implementation, such as Paragon
ufsd dirver.
As described in the specification, the lower directory size limits
is 0 bytes.
Without this commit, sub-directories and files cannot be created
under a zero-size directory, and it cannot be removed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Add GET and SET attributes ioctls to enable attribute modification.
We already do this in FAT and a few userspace utils made for it would
benefit from this also working on exFAT, namely fatattr.
Signed-off-by: Jan Cincera <hcincera@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-38-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
A rename potentially involves updating 4 different inode timestamps.
Convert to the new simple_rename_timestamp helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-10-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When removing entries from a directory, the ctime must also be updated
alongside the mtime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-4-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
- Handle vendor extension and allocation entries as unrecognized benign secondary entries.
- Fix wrong ->i_blocks on devices with non-512 byte sector.
- Add the check to avoid returning -EIO from exfat_readdir() at current position exceeding the directory size.
- Fix a bug that reach the end of the directory stream at a position not aligned with the dentry size.
- Redefine DIR_DELETED as 0xFFFFFFF7, the bad cluster number.
- Two cleanup fixes and fix cluster leakage in error handling.
-----BEGIN PGP SIGNATURE-----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=AbjH
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Handle vendor extension and allocation entries as unrecognized benign
secondary entries
- Fix wrong ->i_blocks on devices with non-512 byte sector
- Add the check to avoid returning -EIO from exfat_readdir() at current
position exceeding the directory size
- Fix a bug that reach the end of the directory stream at a position
not aligned with the dentry size
- Redefine DIR_DELETED as 0xFFFFFFF7, the bad cluster number
- Two cleanup fixes and fix cluster leakage in error handling
* tag 'exfat-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix the newly allocated clusters are not freed in error handling
exfat: don't print error log in normal case
exfat: remove unneeded code from exfat_alloc_cluster()
exfat: handle unreconized benign secondary entries
exfat: fix inode->i_blocks for non-512 byte sector size device
exfat: redefine DIR_DELETED as the bad cluster number
exfat: fix reporting fs error when reading dir beyond EOF
exfat: fix unexpected EOF while reading dir
inode->i_blocks is not real number of blocks, but 512 byte ones.
Fixes: 98d917047e ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
This commit removes argument 'num_entries' and 'type' from
exfat_find_dir_entry().
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The code gets the dentry, but the dentry is not used, remove the
code.
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since struct exfat_entry_set_cache is allocated from stack,
no need to free, so rename exfat_free_dentry_set() to
exfat_put_dentry_set(). After renaming, the new function pair
is exfat_get_dentry_set()/exfat_put_dentry_set().
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The size of struct exfat_entry_set_cache is only 56 bytes on
64-bit system, and allocating from stack is more efficient than
allocating from heap.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
After traversing all directory entries, hint the empty directory
entry no matter whether or not there are enough empty directory
entries.
After this commit, hint the empty directory entries like this:
1. Hint the deleted directory entries if enough;
2. Hint the deleted and unused directory entries which at the
end of the cluster chain no matter whether enough or not(Add
by this commit);
3. If no any empty directory entries, hint the empty directory
entries in the new cluster(Add by this commit).
This avoids repeated traversal of directory entries, reduces CPU
usage, and improves the performance of creating files and
directories(especially on low-performance CPUs).
Test create 5000 files in a class 4 SD card on imx6q-sabrelite
with:
for ((i=0;i<5;i++)); do
sync
time (for ((j=1;j<=1000;j++)); do touch file$((i*1000+j)); done)
done
The more files, the more performance improvements.
Before After Improvement
1~1000 25.360s 22.168s 14.40%
1001~2000 38.242s 28.72ss 33.15%
2001~3000 49.134s 35.037s 40.23%
3001~4000 62.042s 41.624s 49.05%
4001~5000 73.629s 46.772s 57.42%
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
LTP has a test for oversized file path renames and it expects the
return value to be ENAMETOOLONG. However, exfat returns EINVAL
unexpectedly in some cases, hence LTP test fails. The further
investigation indicated that the problem happens only when iocharset
isn't set to utf8.
The difference comes from that, in the case of utf8,
exfat_utf8_to_utf16() returns the error -ENAMETOOLONG directly and
it's treated as the final error code. Meanwhile, on other iocharsets,
exfat_nls_to_ucs2() returns the max path size but it sets
NLS_NAME_OVERLEN to lossy flag instead; the caller side checks only
whether lossy flag is set or not, resulting in always -EINVAL
unconditionally.
This patch aligns the return code for both cases by checking the lossy
flag bit and returning ENAMETOOLONG when NLS_NAME_OVERLEN bit is set.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1201725
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since the timestamps need to be updated, the directory entries
will be updated by mark_inode_dirty() whether or not a new
cluster is allocated for the file or directory, so there is no
need to use __exfat_write_inode() to update the directory entries
when allocating a new cluster for a file or directory.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
__exfat_write_inode() is used to update file and stream directory
entries, except for file->start_clu and stream->flags.
This commit moves update file->start_clu and stream->flags to
__exfat_write_inode() and reuse __exfat_write_inode() to update
directory entries.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In order for a file to access its own directory entry set,
exfat_inode_info(ei) has two copied values. One is ei->dir, which is
a snapshot of exfat_chain of the parent directory, and the other is
ei->entry, which is the offset of the start of the directory entry set
in the parent directory.
Since the parent directory can be updated after the snapshot point,
it should be used only for accessing one's own directory entry set.
However, as of now, during renaming, it could try to traverse or to
allocate clusters via snapshot values, it does not make sense.
This potential problem has been revealed when exfat_update_parent_info()
was removed by commit d8dad2588a ("exfat: fix referencing wrong parent
directory information after renaming"). However, I don't think it's good
idea to bring exfat_update_parent_info() back.
Instead, let's use the updated exfat_chain of parent directory diectly.
Fixes: d8dad2588a ("exfat: fix referencing wrong parent directory information after renaming")
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
