If the stripe extent we want to delete starts before the range we want to
delete and ends after the range we want to delete we're punching a
hole in the stripe extent:
|--- RAID Stripe Extent ---|
| keep |--- drop ---| keep |
This means we need to a) truncate the existing item and b)
create a second item for the remaining range.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a user requests the deletion of a range that spans multiple stripe
extents and btrfs_search_slot() returns us the second RAID stripe extent,
we need to pick the previous item and truncate it, if there's still a
range to delete left, move on to the next item.
The following diagram illustrates the operation:
|--- RAID Stripe Extent ---||--- RAID Stripe Extent ---|
|--- keep ---|--- drop ---|
While at it, comment the trivial case of a whole item delete as well.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix tail delete of RAID stripe-extents, if there is a range to be deleted
as well after the tail delete of the extent.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When deleting the front of a RAID stripe-extent the delete code
miscalculates the size on how much to pad the remaining extent part in the
front.
Fix the calculation so we're always having the sizes we expect.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When modifying a RAID stripe-extent, ASSERT() that the length of the new
RAID stripe-extent is always greater than 0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Even if the RAID stripe-tree is not enabled in the filesystem,
do_free_extent_accounting() still calls into btrfs_delete_raid_extent().
Check if the extent in question is on a block-group that has a profile
which is used by RAID stripe-tree before attempting to delete a stripe
extent. Return early if it doesn't, otherwise we're doing a unnecessary
search.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
RAID stripe-tree is an incompatible feature not a read-only compatible, so
set the incompat flag not a compat_ro one in the selftest code.
Subsequent changes in btrfs_delete_raid_extent() will start checking for
this flag.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside function get_canonical_dev_path(), we call d_path() to get the
final device path.
But d_path() can return error, and in that case the next strscpy() call
will trigger an invalid memory access.
Add back the missing error handling for d_path().
Reported-by: Boris Burkov <boris@bur.io>
Fixes: 7e06de7c83 ("btrfs: canonicalize the device path before adding it")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an io_uring interface for encoded writes, with the same parameters
as the BTRFS_IOC_ENCODED_WRITE ioctl.
As with the encoded reads code, there's a test program for this at
https://github.com/maharmstone/io_uring-encoded, and I'll get this
worked into an fstest.
How io_uring works is that it initially calls btrfs_uring_cmd with the
IO_URING_F_NONBLOCK flag set, and if we return -EAGAIN it tries again in
a kthread with the flag cleared.
Ideally we'd honour this and call try_lock etc., but there's still a lot
of work to be done to create non-blocking versions of all the functions
in our write path. Instead, just validate the input in
btrfs_uring_encoded_write() on the first pass and return -EAGAIN, with a
view to properly optimizing the optimistic path later on.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_cleanup_ordered_extents() is only called in error
handling path, and the last caller with a @locked_folio parameter was
removed to fix a bug in the btrfs_run_delalloc_range() error handling.
There is no need to pass @locked_folio parameter anymore.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All the error handling bugs I hit so far are all -ENOSPC from either:
- cow_file_range()
- run_delalloc_nocow()
- submit_uncompressed_range()
Previously when those functions failed, there was no error message at
all, making the debugging much harder.
So here we introduce extra error messages for:
- cow_file_range()
- run_delalloc_nocow()
- submit_uncompressed_range()
- writepage_delalloc() when btrfs_run_delalloc_range() failed
- extent_writepage() when extent_writepage_io() failed
One example of the new debug error messages is the following one:
run fstests generic/750 at 2024-12-08 12:41:41
BTRFS: device fsid 461b25f5-e240-4543-8deb-e7c2bd01a6d3 devid 1 transid 8 /dev/mapper/test-scratch1 (253:4) scanned by mount (2436600)
BTRFS info (device dm-4): first mount of filesystem 461b25f5-e240-4543-8deb-e7c2bd01a6d3
BTRFS info (device dm-4): using crc32c (crc32c-arm64) checksum algorithm
BTRFS info (device dm-4): forcing free space tree for sector size 4096 with page size 65536
BTRFS info (device dm-4): using free-space-tree
BTRFS warning (device dm-4): read-write for sector size 4096 with page size 65536 is experimental
BTRFS info (device dm-4): checking UUID tree
BTRFS error (device dm-4): cow_file_range failed, root=363 inode=412 start=503808 len=98304: -28
BTRFS error (device dm-4): run_delalloc_nocow failed, root=363 inode=412 start=503808 len=98304: -28
BTRFS error (device dm-4): failed to run delalloc range, root=363 ino=412 folio=458752 submit_bitmap=11-15 start=503808 len=98304: -28
Which shows an error from cow_file_range() which is called inside a
nocow write attempt, along with the extra bitmap from
writepage_delalloc().
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For btrfs_folio_assert_not_dirty() and btrfs_folio_set_lock(), we call
bitmap_test_range_all_zero() to ensure the involved range has no
dirty/lock bit already set.
However with my recent enhanced delalloc range error handling, I was
hitting the ASSERT() inside btrfs_folio_set_lock(), and it turns out
that some error handling path is not properly updating the folio flags.
So add some extra dumping for the ASSERTs to dump the involved bitmap
to help debug.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're dumping the locked bitmap into the @checked_bitmap variable,
printing incorrect values during debug.
Thankfully even during my development I haven't hit a case where I need
to dump the locked bitmap. But for the sake of consistency, fix it by
dupping the locked bitmap into @locked_bitmap variable for output.
Fixes: 75258f20fb ("btrfs: subpage: dump extra subpage bitmaps for debug")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash
with the following VM_BUG_ON_FOLIO():
BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28
BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28
page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664
aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774"
flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff)
page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio))
------------[ cut here ]------------
kernel BUG at mm/page-writeback.c:2992!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : folio_clear_dirty_for_io+0x128/0x258
lr : folio_clear_dirty_for_io+0x128/0x258
Call trace:
folio_clear_dirty_for_io+0x128/0x258
btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs]
__process_folios_contig+0x154/0x268 [btrfs]
extent_clear_unlock_delalloc+0x5c/0x80 [btrfs]
run_delalloc_nocow+0x5f8/0x760 [btrfs]
btrfs_run_delalloc_range+0xa8/0x220 [btrfs]
writepage_delalloc+0x230/0x4c8 [btrfs]
extent_writepage+0xb8/0x358 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x178/0x3a8 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
The first two lines of extra debug messages show the problem is caused
by the error handling of run_delalloc_nocow().
E.g. we have the following dirtied range (4K blocksize 4K page size):
0 16K 32K
|//////////////////////////////////////|
| Pre-allocated |
And the range [0, 16K) has a preallocated extent.
- Enter run_delalloc_nocow() for range [0, 16K)
Which found range [0, 16K) is preallocated, can do the proper NOCOW
write.
- Enter fallback_to_fow() for range [16K, 32K)
Since the range [16K, 32K) is not backed by preallocated extent, we
have to go COW.
- cow_file_range() failed for range [16K, 32K)
So cow_file_range() will do the clean up by clearing folio dirty,
unlock the folios.
Now the folios in range [16K, 32K) is unlocked.
- Enter extent_clear_unlock_delalloc() from run_delalloc_nocow()
Which is called with PAGE_START_WRITEBACK to start page writeback.
But folios can only be marked writeback when it's properly locked,
thus this triggered the VM_BUG_ON_FOLIO().
Furthermore there is another hidden but common bug that
run_delalloc_nocow() is not clearing the folio dirty flags in its error
handling path.
This is the common bug shared between run_delalloc_nocow() and
cow_file_range().
[FIX]
- Clear folio dirty for range [@start, @cur_offset)
Introduce a helper, cleanup_dirty_folios(), which
will find and lock the folio in the range, clear the dirty flag and
start/end the writeback, with the extra handling for the
@locked_folio.
- Introduce a helper to clear folio dirty, start and end writeback
- Introduce a helper to record the last failed COW range end
This is to trace which range we should skip, to avoid double
unlocking.
- Skip the failed COW range for the error handling
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When testing with COW fixup marked as BUG_ON() (this is involved with the
new pin_user_pages*() change, which should not result new out-of-band
dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW
fixup path.
This BUG_ON() happens just after a failed btrfs_run_delalloc_range():
BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:1444!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 0 UID: 0 PID: 434621 Comm: kworker/u24:8 Tainted: G OE 6.12.0-rc7-custom+ #86
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : extent_writepage_io+0x2d4/0x308 [btrfs]
lr : extent_writepage_io+0x2d4/0x308 [btrfs]
Call trace:
extent_writepage_io+0x2d4/0x308 [btrfs]
extent_writepage+0x218/0x330 [btrfs]
extent_write_cache_pages+0x1d4/0x4b0 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x180/0x3b0 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: aa1403e1 9402f3ef aa1403e0 9402f36f (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
That failure is mostly from cow_file_range(), where we can hit -ENOSPC.
Although the -ENOSPC is already a bug related to our space reservation
code, let's just focus on the error handling.
For example, we have the following dirty range [0, 64K) of an inode,
with 4K sector size and 4K page size:
0 16K 32K 48K 64K
|///////////////////////////////////////|
|#######################################|
Where |///| means page are still dirty, and |###| means the extent io
tree has EXTENT_DELALLOC flag.
- Enter extent_writepage() for page 0
- Enter btrfs_run_delalloc_range() for range [0, 64K)
- Enter cow_file_range() for range [0, 64K)
- Function btrfs_reserve_extent() only reserved one 16K extent
So we created extent map and ordered extent for range [0, 16K)
0 16K 32K 48K 64K
|////////|//////////////////////////////|
|<- OE ->|##############################|
And range [0, 16K) has its delalloc flag cleared.
But since we haven't yet submit any bio, involved 4 pages are still
dirty.
- Function btrfs_reserve_extent() returns with -ENOSPC
Now we have to run error cleanup, which will clear all
EXTENT_DELALLOC* flags and clear the dirty flags for the remaining
ranges:
0 16K 32K 48K 64K
|////////| |
| | |
Note that range [0, 16K) still has its pages dirty.
- Some time later, writeback is triggered again for the range [0, 16K)
since the page range still has dirty flags.
- btrfs_run_delalloc_range() will do nothing because there is no
EXTENT_DELALLOC flag.
- extent_writepage_io() finds page 0 has no ordered flag
Which falls into the COW fixup path, triggering the BUG_ON().
Unfortunately this error handling bug dates back to the introduction of
btrfs. Thankfully with the abuse of COW fixup, at least it won't crash
the kernel.
[FIX]
Instead of immediately unlocking the extent and folios, we keep the extent
and folios locked until either erroring out or the whole delalloc range
finished.
When the whole delalloc range finished without error, we just unlock the
whole range with PAGE_SET_ORDERED (and PAGE_UNLOCK for !keep_locked
cases), with EXTENT_DELALLOC and EXTENT_LOCKED cleared.
And the involved folios will be properly submitted, with their dirty
flags cleared during submission.
For the error path, it will be a little more complex:
- The range with ordered extent allocated (range (1))
We only clear the EXTENT_DELALLOC and EXTENT_LOCKED, as the remaining
flags are cleaned up by
btrfs_mark_ordered_io_finished()->btrfs_finish_one_ordered().
For folios we finish the IO (clear dirty, start writeback and
immediately finish the writeback) and unlock the folios.
- The range with reserved extent but no ordered extent (range(2))
- The range we never touched (range(3))
For both range (2) and range(3) the behavior is not changed.
Now even if cow_file_range() failed halfway with some successfully
reserved extents/ordered extents, we will keep all folios clean, so
there will be no future writeback triggered on them.
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If we failed to compress the range, or cannot reserve a large enough
data extent (e.g. too fragmented free space), we will fall back to
submit_uncompressed_range().
But inside submit_uncompressed_range(), run_delalloc_cow() can also fail
due to -ENOSPC or any other error.
In that case there are 3 bugs in the error handling:
1) Double freeing for the same ordered extent
This can lead to crash due to ordered extent double accounting
2) Start/end writeback without updating the subpage writeback bitmap
3) Unlock the folio without clear the subpage lock bitmap
Both bugs 2) and 3) will crash the kernel if the btrfs block size is
smaller than folio size, as the next time the folio gets writeback/lock
updates, subpage will find the bitmap already have the range set,
triggering an ASSERT().
[CAUSE]
Bug 1) happens in the following call chain:
submit_uncompressed_range()
|- run_delalloc_cow()
| |- cow_file_range()
| |- btrfs_reserve_extent()
| Failed with -ENOSPC or whatever error
|
|- btrfs_clean_up_ordered_extents()
| |- btrfs_mark_ordered_io_finished()
| Which cleans all the ordered extents in the async_extent range.
|
|- btrfs_mark_ordered_io_finished()
Which cleans the folio range.
The finished ordered extents may not be immediately removed from the
ordered io tree, as they are removed inside a work queue.
So the second btrfs_mark_ordered_io_finished() may find the finished but
not-yet-removed ordered extents, and double free them.
Furthermore, the second btrfs_mark_ordered_io_finished() is not subpage
compatible, as it uses fixed folio_pos() with PAGE_SIZE, which can cover
other ordered extents.
Bugs 2) and 3) are more straightforward, btrfs just calls folio_unlock(),
folio_start_writeback() and folio_end_writeback(), other than the helpers
which handle subpage cases.
[FIX]
For bug 1) since the first btrfs_cleanup_ordered_extents() call is
handling the whole range, we should not do the second
btrfs_mark_ordered_io_finished() call.
And for the first btrfs_cleanup_ordered_extents(), we no longer need to
pass the @locked_page parameter, as we are already in the async extent
context, thus will never rely on the error handling inside
btrfs_run_delalloc_range().
So just let the btrfs_clean_up_ordered_extents() handle every folio
equally.
For bug 2) we should not even call
folio_start_writeback()/folio_end_writeback() anymore.
As the error handling protocol, cow_file_range() should clear
dirty flag and start/finish the writeback for the whole range passed in.
For bug 3) just change the folio_unlock() to btrfs_folio_end_lock()
helper.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If submit_one_sector() failed inside extent_writepage_io() for sector
size < page size cases (e.g. 4K sector size and 64K page size), then
we can hit double ordered extent accounting error.
This should be very rare, as submit_one_sector() only fails when we
failed to grab the extent map, and such extent map should exist inside
the memory and has been pinned.
[CAUSE]
For example we have the following folio layout:
0 4K 32K 48K 60K 64K
|//| |//////| |///|
Where |///| is the dirty range we need to writeback. The 3 different
dirty ranges are submitted for regular COW.
Now we hit the following sequence:
- submit_one_sector() returned 0 for [0, 4K)
- submit_one_sector() returned 0 for [32K, 48K)
- submit_one_sector() returned error for [60K, 64K)
- btrfs_mark_ordered_io_finished() called for the whole folio
This will mark the following ranges as finished:
* [0, 4K)
* [32K, 48K)
Both ranges have their IO already submitted, this cleanup will
lead to double accounting.
* [60K, 64K)
That's the correct cleanup.
The only good news is, this error is only theoretical, as the target
extent map is always pinned, thus we should directly grab it from
memory, other than reading it from the disk.
[FIX]
Instead of calling btrfs_mark_ordered_io_finished() for the whole folio
range, which can touch ranges we should not touch, instead
move the error handling inside extent_writepage_io().
So that we can cleanup exact sectors that ought to be submitted but failed.
This provides much more accurate cleanup, avoiding the double accounting.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running btrfs with block size (4K) smaller than page size (64K,
aarch64), there is a very high chance to crash the kernel at
generic/750, with the following messages:
(before the call traces, there are 3 extra debug messages added)
BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental
BTRFS info (device dm-3): checking UUID tree
hrtimer: interrupt took 5451385 ns
BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): run_delalloc_nocow failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): failed to run delalloc range, root=4957 ino=257 folio=1572864 submit_bitmap=8-15 start=1605632 len=69632: -28
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3020984 at ordered-data.c:360 can_finish_ordered_extent+0x370/0x3b8 [btrfs]
CPU: 2 UID: 0 PID: 3020984 Comm: kworker/u24:1 Tainted: G OE 6.13.0-rc1-custom+ #89
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : can_finish_ordered_extent+0x370/0x3b8 [btrfs]
lr : can_finish_ordered_extent+0x1ec/0x3b8 [btrfs]
Call trace:
can_finish_ordered_extent+0x370/0x3b8 [btrfs] (P)
can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] (L)
btrfs_mark_ordered_io_finished+0x130/0x2b8 [btrfs]
extent_writepage+0x10c/0x3b8 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x160 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x74/0xa0
start_delalloc_inodes+0x17c/0x3b0 [btrfs]
btrfs_start_delalloc_roots+0x17c/0x288 [btrfs]
shrink_delalloc+0x11c/0x280 [btrfs]
flush_space+0x288/0x328 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x228/0x680
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1605632 OE len=16384 to_dec=16384 left=0
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1622016 OE len=12288 to_dec=12288 left=0
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1634304 OE len=8192 to_dec=4096 left=0
CPU: 1 UID: 0 PID: 3286940 Comm: kworker/u24:3 Tainted: G W OE 6.13.0-rc1-custom+ #89
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: btrfs_work_helper [btrfs] (btrfs-endio-write)
pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : process_one_work+0x110/0x680
lr : worker_thread+0x1bc/0x360
Call trace:
process_one_work+0x110/0x680 (P)
worker_thread+0x1bc/0x360 (L)
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: f84086a1 f9000fe1 53041c21 b9003361 (f9400661)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 2-3
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: 0x275bb9540000 from 0xffff800080000000
PHYS_OFFSET: 0xffff8fbba0000000
CPU features: 0x100,00000070,00801250,8201720b
[CAUSE]
The above warning is triggered immediately after the delalloc range
failure, this happens in the following sequence:
- Range [1568K, 1636K) is dirty
1536K 1568K 1600K 1636K 1664K
| |/////////|////////| |
Where 1536K, 1600K and 1664K are page boundaries (64K page size)
- Enter extent_writepage() for page 1536K
- Enter run_delalloc_nocow() with locked page 1536K and range
[1568K, 1636K)
This is due to the inode having preallocated extents.
- Enter cow_file_range() with locked page 1536K and range
[1568K, 1636K)
- btrfs_reserve_extent() only reserved two extents
The main loop of cow_file_range() only reserved two data extents,
Now we have:
1536K 1568K 1600K 1636K 1664K
| |<-->|<--->|/|///////| |
1584K 1596K
Range [1568K, 1596K) has an ordered extent reserved.
- btrfs_reserve_extent() failed inside cow_file_range() for file offset
1596K
This is already a bug in our space reservation code, but for now let's
focus on the error handling path.
Now cow_file_range() returned -ENOSPC.
- btrfs_run_delalloc_range() do error cleanup <<< ROOT CAUSE
Call btrfs_cleanup_ordered_extents() with locked folio 1536K and range
[1568K, 1636K)
Function btrfs_cleanup_ordered_extents() normally needs to skip the
ranges inside the folio, as it will normally be cleaned up by
extent_writepage().
Such split error handling is already problematic in the first place.
What's worse is the folio range skipping itself, which is not taking
subpage cases into consideration at all, it will only skip the range
if the page start >= the range start.
In our case, the page start < the range start, since for subpage cases
we can have delalloc ranges inside the folio but not covering the
folio.
So it doesn't skip the page range at all.
This means all the ordered extents, both [1568K, 1584K) and
[1584K, 1596K) will be marked as IOERR.
And these two ordered extents have no more pending ios, they are marked
finished, and *QUEUED* to be deleted from the io tree.
- extent_writepage() do error cleanup
Call btrfs_mark_ordered_io_finished() for the range [1536K, 1600K).
Although ranges [1568K, 1584K) and [1584K, 1596K) are finished, the
deletion from io tree is async, it may or may not happen at this
time.
If the ranges have not yet been removed, we will do double cleaning on
those ranges, triggering the above ordered extent warnings.
In theory there are other bugs, like the cleanup in extent_writepage()
can cause double accounting on ranges that are submitted asynchronously
(compression for example).
But that's much harder to trigger because normally we do not mix regular
and compression delalloc ranges.
[FIX]
The folio range split is already buggy and not subpage compatible, it
was introduced a long time ago where subpage support was not even considered.
So instead of splitting the ordered extents cleanup into the folio range
and out of folio range, do all the cleanup inside writepage_delalloc().
- Pass @NULL as locked_folio for btrfs_cleanup_ordered_extents() in
btrfs_run_delalloc_range()
- Skip the btrfs_cleanup_ordered_extents() if writepage_delalloc()
failed
So all ordered extents are only cleaned up by
btrfs_run_delalloc_range().
- Handle the ranges that already have ordered extents allocated
If part of the folio already has ordered extent allocated, and
btrfs_run_delalloc_range() failed, we also need to cleanup that range.
Now we have a concentrated error handling for ordered extents during
btrfs_run_delalloc_range().
Fixes: d1051d6ebf ("btrfs: Fix error handling in btrfs_cleanup_ordered_extents")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename the macro so it's obvious what it means.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Same pattern in both functions, we really only use index, start_index is
redundant.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are only 2 WAIT_* values left for wait parameter, we can encode
this to the function name if the waiting functionality is split.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Last use was in the readahead code that got removed by f26c923860
("btrfs: remove reada infrastructure").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Another conversion to folio API, use the folio locking directly instead
of back and forth page <-> folio conversions.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The check function pattern is supposed to return true/false, currently
there's only one error code.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the folio API, remove page_folio/folio_page conversions.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Continue page to folio updates, sync what the function does with it's
name.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using the kmem cache freeing directly is clear enough, we don't need to
wrap it. All the users are in the same file.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The simple helper can be inlined, no need for the separate function.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As extent_writepage() is internal helper we should use our inode type,
so change it from struct inode.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The double underscore naming scheme does not apply here, there's only
only get_extent_map(). As the definition is changed also pass the struct
btrfs_inode.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function set_page_extent_mapped() is now a simple wrapper so use the
folio helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop the leading underscores in '__unlock_for_delalloc()' and rename it
to 'unlock_delalloc_folio()'. This also ensures naming parity with
'lock_delalloc_folios()'.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the existing define for single sector size.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The subvol_srcu was removed in c75e839414 ("btrfs: kill the
subvol_srcu") years ago.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 449813515d ("block, fs: Restore the per-bio/request data
lifetime fields") restored write-hint support in btrfs. But that is
applicable only for direct IO. This patch supports passing
write-hint for buffered IO from btrfs file system to block layer
by filling bi_write_hint of struct bio in alloc_new_bio().
There's an ongoing discussion which devices can use that,
https://lore.kernel.org/all/20240910150200.6589-6-joshi.k@samsung.com,
in SCSI there's support using sd_group_number() and
sd_setup_rw32_cmnd().
The hint goes from the application directly to the block device so it's
up to the application to set up everything properly to utilize the
different hint classes.
Link: https://lore.kernel.org/all/20240910150200.6589-6-joshi.k@samsung.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jing Xia <j.xia@samsung.com>
[ Add more context and use case. ]
Signed-off-by: David Sterba <dsterba@suse.com>
Print the read read policy if set as module parameter (with
CONFIG_BTRFS_EXPERIMENTAL).
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For testing purposes allow to configure the read policy via module
parameter from the beginning. Available only with CONFIG_BTRFS_EXPERIMENTAL
Examples:
- Set the RAID1 balancing method to round-robin with a custom
min_contig_read of 4k:
$ modprobe btrfs read_policy=round-robin:4096
- Set the round-robin balancing method with the default
min_contiguous_read:
$ modprobe btrfs read_policy=round-robin
- Set the "devid" balancing method, defaulting to the latest device:
$ modprobe btrfs read_policy=devid
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit c9c49e8f157e ("btrfs: split out CONFIG_BTRFS_EXPERIMENTAL from
CONFIG_BTRFS_DEBUG") introduces a way to enable or disable experimental
features, print its status during module load, like:
Btrfs loaded, experimental=on, debug=on, assert=on, zoned=yes, fsverity=yes
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add read policy that will force all reads to go to the given device
(specified by devid) on the RAID1 profiles.
This will be used for testing, e.g. to read from stale device. Users may
find other use cases.
Can be set in sysfs, the value format is "devid:<devid>" to the file
/sys/fs/btrfs/FSID/read_policy
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add round-robin read policy that balances reads over available devices
(all RAID1 block group profiles). Switch to the next devices is done
after a number of blocks is read, which is 256K by default and is
configurable in sysfs.
The format is "round-robin:<min-contig-read>" and can be set in file
/sys/fs/btrfs/FSID/read_policy
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Track number of read blocks in the whole filesystem. The counter is
initialized when devices are opened. The counter is increased at
btrfs_submit_dev_bio() if the stats tracking is enabled (depends on the
read policy). Stats tracking is disabled by default and is enabled
through fs_devices::collect_fs_stats when required.
The code is not under the EXPERIMENTAL define, as stats can be expanded
to include write counts and other performance counters, with the user
interface independent of its internal use.
This is an in-memory-only feature, not related to the dev error stats.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable specifying additional configuration values along the RAID1
balancing read policy in a single input string.
Update btrfs_read_policy_to_enum() to parse and handle a value
associated with the policy in the format "policy:value", the value part
if present is converted to 64-bit integer.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce btrfs_read_policy_to_enum() helper to simplify the conversion
of a string read policy to its corresponding enum value. This reduces
duplication and improves code clarity in btrfs_read_policy_store().
The parameter is copied locally to allow modification, enabling the
separation of the method and its value. This prepares for the addition of
more functionality in subsequent patches.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Refactor the logic in btrfs_read_policy_show() for easier extension with
more balancing methods. Streamline the space and bracket handling
around the active policy without altering the functional output. This
is in preparation to add more methods.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, fs_devices->fs_info is initialized in btrfs_init_devices_late(),
but this occurs too late for find_live_mirror(), which is invoked by
load_super_root() much earlier than btrfs_init_devices_late().
Fix this by moving the initialization to open_ctree(), before load_super_root().
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The call to btrfs_mark_buffer_dirty() at btrfs_setxattr() is not
necessary as we have a path setup for writing with btrfs_search_slot()
having a 'cow' argument set to 1.
This just makes the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The call to btrfs_mark_buffer_dirty() at btrfs_uuid_tree_add() is not
necessary as we have a path setup for writing with btrfs_search_slot()
having a 'cow' argument set to 1 (through btrfs_insert_empty_item()).
This just makes the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The call to btrfs_mark_buffer_dirty() at update_raid_extent_item() is not
necessary as we have a path setup for writing with btrfs_search_slot()
having a 'cow' argument set to 1.
This just makes the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The call to btrfs_mark_buffer_dirty() at btrfs_ioctl_default_subvol() is
not necessary as we have a path setup for writing with btrfs_search_slot()
having a 'cow' argument set to 1.
This just makes the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The call to btrfs_mark_buffer_dirty() at btrfs_run_dev_replace() is not
necessary as we have a path setup for writing with btrfs_search_slot()
having a 'cow' argument set to 1.
This just makes the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The call to btrfs_mark_buffer_dirty() at __btrfs_update_delayed_inode() is
not necessary as we have a path setup for writing with btrfs_search_slot()
having a 'cow' argument set to 1.
This just makes the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
ike btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places explicitly calling btrfs_mark_buffer_dirty() but
that is not necessarily since the target leaf came from a path that was
obtained for a btree search function that modifies the btree, something
like btrfs_insert_empty_item() or anything else that ends up calling
btrfs_search_slot() with a value of 1 for its 'cow' argument.
These just make the code more verbose, confusing and add a little extra
overhead and well as increase the module's text size, so remove them.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During renames we are grouping transaction aborts that can be due to a
failure of one of several function calls. While this makes the code less
verbose, it makes it harder to debug as we end up not knowing from which
function call we got an error.
So change this to trigger a transaction abort after each function call
failure, so that when we get a transaction abort message we know exactly
which function call failed, helping us to debug issues.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_validate_super() only does a very basic check on the
array chunk size (not too large than the available space, but not too
small to contain no chunk).
The more comprehensive checks (the regular chunk checks and size check
inside the system chunk array) are all done inside btrfs_read_sys_array().
It's not a big deal, but it also means we do not do any validation on
the system chunk array at super block writeback time either.
Do the following modification to centralize the system chunk array
checks into btrfs_validate_super():
- Make chunk_err() helper accept stack chunk pointer
If @leaf parameter is NULL, then the @chunk pointer will be a pointer
to the chunk item, other than the offset inside the leaf.
And since @leaf can be NULL, add a new @fs_info parameter for that
case.
- Make btrfs_check_chunk_valid() handle stack chunk pointer
The same as chunk_err(), a new @fs_info parameter, and if @leaf is
NULL, then @chunk will be a pointer to a stack chunk.
If @chunk is NULL, then all needed btrfs_chunk members will be read
using the stack helper instead of the leaf helper.
This means we need to read out all the needed member at the beginning
of the function.
Furthermore, at super block read time, fs_info->sectorsize is not yet
initialized, we need one extra @sectorsize parameter to grab the
correct sectorsize.
- Introduce a helper validate_sys_chunk_array()
* Validate the disk key.
* Validate the size before we access the full chunk items.
* Do the full chunk item validation.
- Call validate_sys_chunk_array() at btrfs_validate_super()
- Simplify the checks inside btrfs_read_sys_array()
Now the checks will be converted to an ASSERT().
- Simplify the checks inside read_one_chunk()
Now that all chunk items inside system chunk array and chunk tree are
verified, there is no need to verify them again inside read_one_chunk().
This change has the following advantages:
- More comprehensive checks at write time
And unlike the sys_chunk_array read routine, this time we do not need
to allocate a dummy extent buffer to do the check.
All the checks done here require no new memory allocation.
- Slightly improved readability when iterating the system chunk array
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update tree_insert() to use rb_find_add_cached().
add cmp_refs_node in rb_find_add_cached() to compare.
Since we're here, also make comp_data_refs() and comp_refs() accept
both parameters as const.
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update btrfs_add_chunk_map() to use rb_find_add_cached().
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update __btrfs_add_delayed_item() to use rb_find_add_cached().
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update prelim_ref_insert() to use rb_find_add_cached().
There is a special change that the existing prelim_ref_compare() is
called with the first parameter as the existing ref in the rbtree.
But the newer rb_find_add_cached() expects the cmp() function to have
the first parameter as the to-be-added node, thus the new helper
prelim_ref_rb_add_cmp() need to adapt this new order.
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update fs/btrfs/block-group.c to use rb_find_add_cached().
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The header clearly states that it does not want to be included directly,
only via linux/spinlock_types.h. Drop this as we can simply use the
spinlock.h which is already included.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During free space tree rebuild, we're holding a transaction handle for
the whole rebuild process.
This can lead to blocked task warning, e.g. btrfs-transaction kthread
(which is already created before btrfs_start_pre_rw_mount()) can be
waked up to join and commit the current transaction.
But the free space tree rebuild process may need to go through thousands
block groups, this will block btrfs-transaction kthread for a long time.
Fix the problem by calling btrfs_should_end_transaction() after each
block group, so that we won't hold the transaction handle too long.
And since the free-space-tree rebuild can be split into
multiple transactions, we need to consider the safety when the rebuild
process is interrupted.
Thankfully since we only set the FREE_SPACE_TREE compat_ro flag without
FREE_SPACE_TREE_VALID flag, even if the rebuild is interrupted, on the
next RW mount, we will still go rebuild the free space tree, by deleting
any items we have and re-starting the rebuild from scratch.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_is_empty_uuid() we have our custom code to check if an uuid is
empty, however there a kernel uuid library that has a function named
uuid_is_null() which does the same and probably more efficient.
So change btrfs_is_empty_uuid() to use uuid_is_null(), which is almost
a directly replacement, it just wraps the necessary casting since our
uuid types are u8 arrays while the uuid kernel library uses the uuid_t
type, which is just a typedef of an u8 array of 16 elements as well.
Also since the function is now to trivial, make it a static inline
function in fs.h.
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's pointless to have a comment above the prototype declarations of
btrfs_ctree_init() and btrfs_ctree_exit() mentioning that they are
declared in ctree.c. This is from the old days when ctree.h was used
to place anything that didn't fit in any other file. So remove it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have 3 functions that have their prototypes declared in ctree.h but
they are defined at extent-tree.c and they are unrelated to the btree
data structure. Move the prototypes out of ctree.h and into extent-tree.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_alloc_write_mask() is defined in ctree.h but it's not
related at all to the btree data structure, so move it into fs.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently BTRFS_BYTES_TO_BLKS() is defined in ctree.h but it's not related
at all to the btree data structure, so move it into fs.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The folio ordered helper macros are defined at ctree.h but this is not
the best place since ctree.{h,c} is all about the btree data structure
implementation and not a generic module. So move these macros into the
fs.h header.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's a generic helper not specific to ioctls and used in several places,
so move it out from ioctl.c and into fs.c. While at it change its return
type from int to bool and declare the loop variable in the loop itself.
This also slightly reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781492 161037 16920 1959449 1de619 fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781340 161037 16920 1959297 1de581 fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The declarations for the exclusive operation functions are located at fs.h
but their definitions are in ioctl.c, which doesn't make much sense since
(most of them) are used in several files other than ioctl.c. Since they
are used in several files and they are generic enough, move them out of
ioctl.c and into fs.c, even the ones that are currently only used at
ioctl.c, for the sake of having them all in the same C file.
This also reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782094 161045 16920 1960059 1de87b fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781492 161037 16920 1959449 1de619 fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ctree module is about the implementation of the btree data structure
and not a place holder for generic filesystem things like the csum
algorithm details. Move the functions related to the csum algorithm
details away from ctree.c and into fs.c, which is a far better place for
them. Also fix missing punctuation in comments and change one multiline
comment to a single line comment since everything fits in under 80
characters.
For some reason this also slightly reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782126 161045 16920 1960091 1de89b fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782094 161045 16920 1960059 1de87b fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function abort_should_print_stack() is declared in transaction.h but
its definition is in ctree.c, which doesn't make sense since ctree.c is
the btree implementation and the function is related to the transaction
code. Move its definition into transaction.h as an inline function since
it's a very short and trivial function, and also add the 'btrfs_' prefix
into its name.
This change also reduces the module size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1783148 161137 16920 1961205 1decf5 fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782126 161045 16920 1960091 1de89b fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have the stripe tree decision saved in struct
btrfs_io_geometry we can pass it into is_single_device_io() and get rid of
another call to btrfs_need_raid_stripe_tree_update().
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cache the decision if a particular I/O needs to update RAID stripe tree
entries in struct btrfs_io_context.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cache the return of btrfs_need_stripe_tree_update() in struct
btrfs_io_geometry starting from btrfs_map_block().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We should always call check_delayed_ref() with a path having a locked leaf
from the extent tree where either the extent item is located or where it
should be located in case it doesn't exist yet (when there's a pending
unflushed delayed ref to do it), as we need to lock any existing delayed
ref head while holding such leaf locked in order to avoid races with
flushing delayed references, which could make us think an extent is not
shared when it really is.
So add some assertions and a comment about such expectations to
btrfs_cross_ref_exist(), which is the only caller of check_delayed_ref().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are some not immediately obvious details about the operation of
check_committed_ref(), namely that when it returns 0 it must return with
the path having a locked leaf from the extent tree that contains the
extent's extent item, so that we can later check for delayed refs when
calling check_delayed_ref() in a way that doesn't race with a task running
delayed references. For similar reasons, it must also return with a locked
leaf when the extent item is not found, and that leaf is where the extent
item should be located, because we may have delayed references that are
going to create the extent item. Also document that the function can
return false positives in order to not be too slow, and that the most
important is to not return false negatives.
So add a function comment to check_committed_ref().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing a root and an objectid which matches an inode number,
pass the inode instead, since the root is always the root associated to
the inode and the objectid is the number of that inode.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of setting the value to return in a local variable 'ret' and then
jumping into a label named 'out' that does nothing but return that value,
simplify everything by getting rid of the label and directly returning a
value.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At check_committed_ref() we are calling btrfs_get_extent_inline_ref_type()
twice, once before we check if have an inline extent owner ref (for simple
qgroups) and then once again sometime after that check. This second call
is redundant when we have simple quotas disabled or we found an inline ref
that is not of the owner ref type. So avoid this second call unless we
have simple quotas enabled and found an owner ref, saving a function call
that does inline ref validation again.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At check_committed_ref() we have this check to see if the data extent was
created in a generation lower than or equals to the generation where the
last snapshot for the root was created, and if so we return immediately
with 1, since it's very likely the extent is shared, referenced by other
root.
The only call chain for check_committed_ref() is the following:
can_nocow_file_extent()
btrfs_cross_ref_exist()
check_committed_ref()
And we already do that snapshot check at can_nocow_file_extent(), before
we call btrfs_cross_ref_exist(). This makes the check done at
check_committed_ref() redundant, so remove it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers of can_nocow_extent() now pass a value of false for its
'strict' argument, making it redundant. So remove the argument from
can_nocow_extent() as well as can_nocow_file_extent(),
btrfs_cross_ref_exist() and check_committed_ref(), because this
argument was used just to influence the behavior of check_committed_ref().
Also remove the 'strict' field from struct can_nocow_file_extent_args,
which is now always false as well, as its value is taken from the
argument to can_nocow_extent().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove the variable length in btrfs_insert_one_raid_extent() as it is
unused.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a recent ML report that mounting a large fs backed by hardware
RAID56 controller (with one device missing) took too much time, and
systemd seems to kill the mount attempt.
In that case, the only error message is:
BTRFS error (device sdj): open_ctree failed
There is no reason on why the failure happened, making it very hard to
understand the reason.
At least output the error number (in the particular case it should be
-EINTR) to provide some clue.
Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Cc: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_copy_from_user() handles the folio dirtying for
buffered write. The original design is to allow that function to handle
multiple folios, but since commit c87c299776 ("btrfs: make buffered
write to copy one page a time") there is no need to support multiple
folios.
So here open-code btrfs_copy_from_user() to
copy_folio_from_iter_atomic() and flush_dcache_folio() calls.
The short-copy check and revert are still kept as-is.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[WARNING]
There are several warnings about the recently introduced qgroup
auto-removal that it triggers WARN_ON() for the non-zero rfer/excl
numbers, e.g:
------------[ cut here ]------------
WARNING: CPU: 67 PID: 2882 at fs/btrfs/qgroup.c:1854 btrfs_remove_qgroup+0x3df/0x450
CPU: 67 UID: 0 PID: 2882 Comm: btrfs-cleaner Kdump: loaded Not tainted 6.11.6-300.fc41.x86_64 #1
RIP: 0010:btrfs_remove_qgroup+0x3df/0x450
Call Trace:
<TASK>
btrfs_qgroup_cleanup_dropped_subvolume+0x97/0xc0
btrfs_drop_snapshot+0x44e/0xa80
btrfs_clean_one_deleted_snapshot+0xc3/0x110
cleaner_kthread+0xd8/0x130
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device sda): to be deleted qgroup 0/319 has non-zero numbers, rfer 258478080 rfer_cmpr 258478080 excl 0 excl_cmpr 0
[CAUSE]
Although the root cause is still unclear, as if qgroup is consistent a
fully dropped subvolume (with extra transaction committed) should lead
to all zero numbers for the qgroup.
My current guess is the subvolume drop triggered the new subtree drop
threshold thus marked qgroup inconsistent, then rescan cleared it but
some corner case is not properly handled during subvolume dropping.
But at least for this particular case, since it's only the rfer/excl not
properly reset to 0, and qgroup is already marked inconsistent, there is
nothing to be worried for the end users.
The user space tool utilizing qgroup would queue a rescan to handle
everything, so the kernel wanring is a little overkilled.
[ENHANCEMENT]
Enhance the warning inside btrfs_remove_qgroup() by:
- Only do WARN() if CONFIG_BTRFS_DEBUG is enabled
As explained the kernel can handle inconsistent qgroups by simply do a
rescan, there is nothing to bother the end users.
- Treat the reserved space leak the same as non-zero numbers
By outputting the values and trigger a WARN() if it's a debug build.
So far I haven't experienced any case related to reserved space so I
hope we will never need to bother them.
Fixes: 839d6ea4f8 ("btrfs: automatically remove the subvolume qgroup")
Link: https://github.com/kdave/btrfs-progs/issues/922
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't ever look at this list, remove it.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before we were keeping all of our nodes on various lists in order to
make sure everything got cleaned up correctly. We used node->lowest to
indicate that node->lower was linked into the cache->leaves list. Now
that we do cleanup based on the rb-tree both the list and the flag are
useless, so delete them both.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We rely on finding all our nodes on the various lists in the backref
cache, when they are all also in the rbtree. Instead just search
through the rbtree and free everything.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we handle relocation for non-shareable roots without using the
backref cache, remove the ->cowonly field from the backref nodes and
update the handling to throw an error.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already determine the owner for any blocks we find when we're
relocating, and for COW-only blocks (and the data reloc tree) we COW
down to the block and call it good enough. However we still build a
whole backref tree for them, even though we're not going to use it, and
then just don't put these blocks in the cache.
Rework the code to check if the block belongs to a COW-only root or the
data reloc root, and then just cow down to the block, skipping the
backref cache generation.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we no longer maintain backref cache across transactions, and this
is only called when we're creating the reloc root for a newly created
snapshot in the transaction critical section, we will end up doing a
bunch of work that will just get thrown away when we start the
transaction in the relocation loop. Delete this code as it no longer
does anything for us.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this setup as a loop, but in reality we will never walk back up
the backref tree, if we do then it's a bug. Get rid of the loop and
handle the case where we have node->new_bytenr set at all. Previous
check was only if node->new_bytenr != root->node->start, but if it did
then we would hit the WARN_ON() and walk back up the tree.
Instead we want to just return error if ->new_bytenr is set, and then do
the normal updating of the node for the reloc root and carry on.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a comment for this field so we know what it is used for. Previously
we used it to update the backref cache, so people may mistakenly think
it is useless, but in fact exists to make sure the backref cache makes
sense.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're not updating the backref cache when we switch transids we
can remove the changed list.
We're going to keep the new_bytenr field because it serves as a good
sanity check for the backref cache and relocation, and can prevent us
from making extent tree corruption worse.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This BUG_ON is meant to catch backref cache problems, but these can
arise from either bugs in the backref cache or corruption in the extent
tree. Fix it to be a proper error.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A data race occurs when the function `insert_ordered_extent_file_extent()`
and the function `btrfs_inode_safe_disk_i_size_write()` are executed
concurrently. The function `insert_ordered_extent_file_extent()` is not
locked when reading inode->disk_i_size, causing
`btrfs_inode_safe_disk_i_size_write()` to cause data competition when
writing inode->disk_i_size, thus affecting the value of `modify_tree`.
The specific call stack that appears during testing is as follows:
============DATA_RACE============
btrfs_drop_extents+0x89a/0xa060 [btrfs]
insert_reserved_file_extent+0xb54/0x2960 [btrfs]
insert_ordered_extent_file_extent+0xff5/0x1760 [btrfs]
btrfs_finish_one_ordered+0x1b85/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
============OTHER_INFO============
btrfs_inode_safe_disk_i_size_write+0x4ec/0x600 [btrfs]
btrfs_finish_one_ordered+0x24c7/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
=================================
The main purpose of the check of the inode's disk_i_size is to avoid
taking write locks on a btree path when we have a write at or beyond
EOF, since in these cases we don't expect to find extent items in the
root to drop. However if we end up taking write locks due to a data
race on disk_i_size, everything is still correct, we only add extra
lock contention on the tree in case there's concurrency from other tasks.
If the race causes us to not take write locks when we actually need them,
then everything is functionally correct as well, since if we find out we
have extent items to drop and we took read locks (modify_tree set to 0),
we release the path and retry again with write locks.
Since this data race does not affect the correctness of the function,
it is a harmless data race, use data_race() to check inode->disk_i_size.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Hao-ran Zheng <zhenghaoran154@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_drop_extents() calls BUG_ON() in case the counter of to be deleted
extents is greater than 0. But all of these code paths can handle errors,
so there's no need to crash the kernel. Instead WARN() that the condition
has been met and gracefully bail out.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On the zoned mode, once used and freed region is still not reusable after the
freeing. The underlying zone needs to be reset before reusing. Btrfs resets a
zone when it removes a block group, and then new block group is allocated on
the zones to reuse the zones. But, it is sometime too late to catch up with a
write side.
This commit introduces a new space-info reclaim method ZONE_RESET. That will
pick a block group from the unused list and reset its zone to reuse the
zone_unusable space. It is faster than removing the block group and re-creating
a new block group on the same zones.
For the first implementation, the ZONE_RESET is only applied to a block group
whose region is fully zone_unusable. Reclaiming partial zone_unusable block
group could be implemented later.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit e1e577aafe41 ("btrfs: store fs_info in space_info"), we have
the fs_info in a space_info. So, we can drop fs_info argument from
btrfs_update_space_info_*. There is no behavior change.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Factor out a part of unpin_extent_range() that returns space back to the
space info, prioritizing global block reserve. Also, move the "len"
variable into the loop to clarify we don't need to carry it beyond an
iteration.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 146054090b ("btrfs: initial fsverity support") introduced
fs-verity support for btrfs, but didn't add support for
FS_IOC_READ_VERITY_METADATA to directly query the Merkle tree,
descriptor and signature blocks for fs-verity enabled files.
Add the (trival) implementation: we just need to wire it through to the
fs-verity code, the same way as is done in the other two filesystems
which support this ioctl (ext4, f2fs). The fs-verity code already has
access to the required data.
This is also safe to backport to older stable trees (5.15+) if needed.
Signed-off-by: Allison Karlitskaya <allison.karlitskaya@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The variable ret is being initialized to zero and also later re-assigned
to zero. In both cases the assignment is redundant since the value is
never read after the assignment and hence they can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_get_extent() will only return an PTR_ERR() or a valid
extent map pointer. It will not return NULL.
Thus the usage of PTR_ERR_OR_ZERO() inside submit_one_sector() is not
needed, use plain PTR_ERR() instead, and that is the only usage of
PTR_ERR_OR_ZERO() after btrfs_get_extent().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The recent fix for a stupid mistake I made uncovered the fact that we
don't have adequate testing in the delayed refs code, as it took a
pretty extensive and long running stress test to uncover something that
a unit test would have uncovered right away.
Fix this by adding a delayed refs self test suite. This will validate
that the btrfs_ref transformation does the correct thing, that we do the
correct thing when merging delayed refs, and that we get the delayed
refs in the order that we expect. These are all crucial to how the
delayed refs operate.
I introduced various bugs (including the original bug) into the delayed
refs code to validate that these tests caught all of the shenanigans
that I could think of.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This helper is how we select the delayed ref to run once we've selected
the delayed ref head. I need this exported to add a unit test for
delayed refs, and it's more natural home is in delayed-ref.c. Rename it
to btrfs_select_delayed_ref and move it into delayed-ref.c.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=QYC1
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes.
Besides the one-liners in Btrfs there's fix to the io_uring and
encoded read integration (added in this development cycle). The update
to io_uring provides more space for the ongoing command that is then
used in Btrfs to handle some cases.
- io_uring and encoded read:
- provide stable storage for io_uring command data
- make a copy of encoded read ioctl call, reuse that in case the
call would block and will be called again
- properly initialize zlib context for hardware compression on s390
- fix max extent size calculation on filesystems with non-zoned
devices
- fix crash in scrub on crafted image due to invalid extent tree"
* tag 'for-6.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zlib: fix avail_in bytes for s390 zlib HW compression path
btrfs: zoned: calculate max_extent_size properly on non-zoned setup
btrfs: avoid NULL pointer dereference if no valid extent tree
btrfs: don't read from userspace twice in btrfs_uring_encoded_read()
io_uring: add io_uring_cmd_get_async_data helper
io_uring/cmd: add per-op data to struct io_uring_cmd_data
io_uring/cmd: rename struct uring_cache to io_uring_cmd_data
Since commit 559218d43e ("block: pre-calculate max_zone_append_sectors"),
queue_limits's max_zone_append_sectors is default to be 0 and it is only
updated when there is a zoned device. So, we have
lim->max_zone_append_sectors = 0 when there is no zoned device in the
filesystem.
That leads to fs_info->max_zone_append_size and thus
fs_info->max_extent_size to be 0, which is wrong and can for example
lead to a divide by zero in count_max_extents().
Fix this by only capping fs_info->max_extent_size to
fs_info->max_zone_append_size when it is non-zero.
Based on a patch from Naohiro Aota <naohiro.aota@wdc.com>, from which
much of this commit message is stolen as well.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 559218d43e ("block: pre-calculate max_zone_append_sectors")
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reported a crash with the following call trace:
BTRFS info (device loop0): scrub: started on devid 1
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs]
scrub_simple_mirror+0x175/0x260 [btrfs]
scrub_stripe+0x5d4/0x6c0 [btrfs]
scrub_chunk+0xbb/0x170 [btrfs]
scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs]
btrfs_scrub_dev+0x240/0x600 [btrfs]
btrfs_ioctl+0x1dc8/0x2fa0 [btrfs]
? do_sys_openat2+0xa5/0xf0
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
[CAUSE]
The reproducer is using a corrupted image where extent tree root is
corrupted, thus forcing to use "rescue=all,ro" mount option to mount the
image.
Then it triggered a scrub, but since scrub relies on extent tree to find
where the data/metadata extents are, scrub_find_fill_first_stripe()
relies on an non-empty extent root.
But unfortunately scrub_find_fill_first_stripe() doesn't really expect
an NULL pointer for extent root, it use extent_root to grab fs_info and
triggered a NULL pointer dereference.
[FIX]
Add an extra check for a valid extent root at the beginning of
scrub_find_fill_first_stripe().
The new error path is introduced by 42437a6386 ("btrfs: introduce
mount option rescue=ignorebadroots"), but that's pretty old, and later
commit b979547513 ("btrfs: scrub: introduce helper to find and fill
sector info for a scrub_stripe") changed how we do scrub.
So for kernels older than 6.6, the fix will need manual backport.
Reported-by: syzbot+339e9dbe3a2ca419b85d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/67756935.050a0220.25abdd.0a12.GAE@google.com/
Fixes: 42437a6386 ("btrfs: introduce mount option rescue=ignorebadroots")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we return -EAGAIN the first time because we need to block,
btrfs_uring_encoded_read() will get called twice. Take a copy of args,
the iovs, and the iter the first time, as by the time we are called the
second time these may have gone out of scope.
Reported-by: Jens Axboe <axboe@kernel.dk>
Fixes: 34310c442e ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)")
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=NwGH
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes that accumulated over the last two weeks, fixing some
user reported problems:
- swapfile fixes:
- conditional reschedule in the activation loop
- fix race with memory mapped file when activating
- make activation loop interruptible
- rework and fix extent sharing checks
- folio fixes:
- in send, recheck folio mapping after unlock
- in relocation, recheck folio mapping after unlock
- fix waiting for encoded read io_uring requests
- fix transaction atomicity when enabling simple quotas
- move COW block trace point before the block gets freed
- print various sizes in sysfs with correct endianity"
* tag 'for-6.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs: fix direct super block member reads
btrfs: fix transaction atomicity bug when enabling simple quotas
btrfs: avoid monopolizing a core when activating a swap file
btrfs: allow swap activation to be interruptible
btrfs: fix swap file activation failure due to extents that used to be shared
btrfs: fix race with memory mapped writes when activating swap file
btrfs: check folio mapping after unlock in put_file_data()
btrfs: check folio mapping after unlock in relocate_one_folio()
btrfs: fix use-after-free when COWing tree bock and tracing is enabled
btrfs: fix use-after-free waiting for encoded read endios
The following sysfs entries are reading super block member directly,
which can have a different endian and cause wrong values:
- sys/fs/btrfs/<uuid>/nodesize
- sys/fs/btrfs/<uuid>/sectorsize
- sys/fs/btrfs/<uuid>/clone_alignment
Thankfully those values (nodesize and sectorsize) are always aligned
inside the btrfs_super_block, so it won't trigger unaligned read errors,
just endian problems.
Fix them by using the native cached members instead.
Fixes: df93589a17 ("btrfs: export more from FS_INFO to sysfs")
CC: stable@vger.kernel.org
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Set squota incompat bit before committing the transaction that enables
the feature.
With the config CONFIG_BTRFS_ASSERT enabled, an assertion
failure occurs regarding the simple quota feature.
[5.596534] assertion failed: btrfs_fs_incompat(fs_info, SIMPLE_QUOTA), in fs/btrfs/qgroup.c:365
[5.597098] ------------[ cut here ]------------
[5.597371] kernel BUG at fs/btrfs/qgroup.c:365!
[5.597946] CPU: 1 UID: 0 PID: 268 Comm: mount Not tainted 6.13.0-rc2-00031-gf92f4749861b #146
[5.598450] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[5.599008] RIP: 0010:btrfs_read_qgroup_config+0x74d/0x7a0
[5.604303] <TASK>
[5.605230] ? btrfs_read_qgroup_config+0x74d/0x7a0
[5.605538] ? exc_invalid_op+0x56/0x70
[5.605775] ? btrfs_read_qgroup_config+0x74d/0x7a0
[5.606066] ? asm_exc_invalid_op+0x1f/0x30
[5.606441] ? btrfs_read_qgroup_config+0x74d/0x7a0
[5.606741] ? btrfs_read_qgroup_config+0x74d/0x7a0
[5.607038] ? try_to_wake_up+0x317/0x760
[5.607286] open_ctree+0xd9c/0x1710
[5.607509] btrfs_get_tree+0x58a/0x7e0
[5.608002] vfs_get_tree+0x2e/0x100
[5.608224] fc_mount+0x16/0x60
[5.608420] btrfs_get_tree+0x2f8/0x7e0
[5.608897] vfs_get_tree+0x2e/0x100
[5.609121] path_mount+0x4c8/0xbc0
[5.609538] __x64_sys_mount+0x10d/0x150
The issue can be easily reproduced using the following reproducer:
root@q:linux# cat repro.sh
set -e
mkfs.btrfs -q -f /dev/sdb
mount /dev/sdb /mnt/btrfs
btrfs quota enable -s /mnt/btrfs
umount /mnt/btrfs
mount /dev/sdb /mnt/btrfs
The issue is that when enabling quotas, at btrfs_quota_enable(), we set
BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE at fs_info->qgroup_flags and persist
it in the quota root in the item with the key BTRFS_QGROUP_STATUS_KEY, but
we only set the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA after we
commit the transaction used to enable simple quotas.
This means that if after that transaction commit we unmount the filesystem
without starting and committing any other transaction, or we have a power
failure, the next time we mount the filesystem we will find the flag
BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE set in the item with the key
BTRFS_QGROUP_STATUS_KEY but we will not find the incompat bit
BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA set in the superblock, triggering an
assertion failure at:
btrfs_read_qgroup_config() -> qgroup_read_enable_gen()
To fix this issue, set the BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA flag
immediately after setting the BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE.
This ensures that both flags are flushed to disk within the same
transaction.
Fixes: 182940f4f4 ("btrfs: qgroup: add new quota mode for simple quotas")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During swap activation we iterate over the extents of a file and we can
have many thousands of them, so we can end up in a busy loop monopolizing
a core. Avoid this by doing a voluntary reschedule after processing each
extent.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During swap activation we iterate over the extents of a file, then do
several checks for each extent, some of which may take some significant
time such as checking if an extent is shared. Since a file can have
many thousands of extents, this can be a very slow operation and it's
currently not interruptible. I had a bug during development of a previous
patch that resulted in an infinite loop when iterating the extents, so
a core was busy looping and I couldn't cancel the operation, which is very
annoying and requires a reboot. So make the loop interruptible by checking
for fatal signals at the end of each iteration and stopping immediately if
there is one.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When activating a swap file, to determine if an extent is shared we use
can_nocow_extent(), which ends up at btrfs_cross_ref_exist(). That helper
is meant to be quick because it's used in the NOCOW write path, when
flushing delalloc and when doing a direct IO write, however it does return
some false positives, meaning it may indicate that an extent is shared
even if it's no longer the case. For the write path this is fine, we just
do a unnecessary COW operation instead of doing a more rigorous check
which would be too heavy (calling btrfs_is_data_extent_shared()).
However when activating a swap file, the false positives simply result
in a failure, which is confusing for users/applications. One particular
case where this happens is when a data extent only has 1 reference but
that reference is not inlined in the extent item located in the extent
tree - this happens when we create more than 33 references for an extent
and then delete those 33 references plus every other non-inline reference
except one. The function check_committed_ref() assumes that if the size
of an extent item doesn't match the size of struct btrfs_extent_item
plus the size of an inline reference (plus an owner reference in case
simple quotas are enabled), then the extent is shared - that is not the
case however, we can have a single reference but it's not inlined - the
reason we do this is to be fast and avoid inspecting non-inline references
which may be located in another leaf of the extent tree, slowing down
write paths.
The following test script reproduces the bug:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
NUM_CLONES=50
umount $DEV &> /dev/null
run_test()
{
local sync_after_add_reflinks=$1
local sync_after_remove_reflinks=$2
mkfs.btrfs -f $DEV > /dev/null
#mkfs.xfs -f $DEV > /dev/null
mount $DEV $MNT
touch $MNT/foo
chmod 0600 $MNT/foo
# On btrfs the file must be NOCOW.
chattr +C $MNT/foo &> /dev/null
xfs_io -s -c "pwrite -b 1M 0 1M" $MNT/foo
mkswap $MNT/foo
for ((i = 1; i <= $NUM_CLONES; i++)); do
touch $MNT/foo_clone_$i
chmod 0600 $MNT/foo_clone_$i
# On btrfs the file must be NOCOW.
chattr +C $MNT/foo_clone_$i &> /dev/null
cp --reflink=always $MNT/foo $MNT/foo_clone_$i
done
if [ $sync_after_add_reflinks -ne 0 ]; then
# Flush delayed refs and commit current transaction.
sync -f $MNT
fi
# Remove the original file and all clones except the last.
rm -f $MNT/foo
for ((i = 1; i < $NUM_CLONES; i++)); do
rm -f $MNT/foo_clone_$i
done
if [ $sync_after_remove_reflinks -ne 0 ]; then
# Flush delayed refs and commit current transaction.
sync -f $MNT
fi
# Now use the last clone as a swap file. It should work since
# its extent are not shared anymore.
swapon $MNT/foo_clone_${NUM_CLONES}
swapoff $MNT/foo_clone_${NUM_CLONES}
umount $MNT
}
echo -e "\nTest without sync after creating and removing clones"
run_test 0 0
echo -e "\nTest with sync after creating clones"
run_test 1 0
echo -e "\nTest with sync after removing clones"
run_test 0 1
echo -e "\nTest with sync after creating and removing clones"
run_test 1 1
Running the test:
$ ./test.sh
Test without sync after creating and removing clones
wrote 1048576/1048576 bytes at offset 0
1 MiB, 1 ops; 0.0017 sec (556.793 MiB/sec and 556.7929 ops/sec)
Setting up swapspace version 1, size = 1020 KiB (1044480 bytes)
no label, UUID=a6b9c29e-5ef4-4689-a8ac-bc199c750f02
swapon: /mnt/sdi/foo_clone_50: swapon failed: Invalid argument
swapoff: /mnt/sdi/foo_clone_50: swapoff failed: Invalid argument
Test with sync after creating clones
wrote 1048576/1048576 bytes at offset 0
1 MiB, 1 ops; 0.0036 sec (271.739 MiB/sec and 271.7391 ops/sec)
Setting up swapspace version 1, size = 1020 KiB (1044480 bytes)
no label, UUID=5e9008d6-1f7a-4948-a1b4-3f30aba20a33
swapon: /mnt/sdi/foo_clone_50: swapon failed: Invalid argument
swapoff: /mnt/sdi/foo_clone_50: swapoff failed: Invalid argument
Test with sync after removing clones
wrote 1048576/1048576 bytes at offset 0
1 MiB, 1 ops; 0.0103 sec (96.665 MiB/sec and 96.6651 ops/sec)
Setting up swapspace version 1, size = 1020 KiB (1044480 bytes)
no label, UUID=916c2740-fa9f-4385-9f06-29c3f89e4764
Test with sync after creating and removing clones
wrote 1048576/1048576 bytes at offset 0
1 MiB, 1 ops; 0.0031 sec (314.268 MiB/sec and 314.2678 ops/sec)
Setting up swapspace version 1, size = 1020 KiB (1044480 bytes)
no label, UUID=06aab1dd-4d90-49c0-bd9f-3a8db4e2f912
swapon: /mnt/sdi/foo_clone_50: swapon failed: Invalid argument
swapoff: /mnt/sdi/foo_clone_50: swapoff failed: Invalid argument
Fix this by reworking btrfs_swap_activate() to instead of using extent
maps and checking for shared extents with can_nocow_extent(), iterate
over the inode's file extent items and use the accurate
btrfs_is_data_extent_shared().
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When activating the swap file we flush all delalloc and wait for ordered
extent completion, so that we don't miss any delalloc and extents before
we check that the file's extent layout is usable for a swap file and
activate the swap file. We are called with the inode's VFS lock acquired,
so we won't race with buffered and direct IO writes, however we can still
race with memory mapped writes since they don't acquire the inode's VFS
lock. The race window is between flushing all delalloc and locking the
whole file's extent range, since memory mapped writes lock an extent range
with the length of a page.
Fix this by acquiring the inode's mmap lock before we flush delalloc.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we call btrfs_read_folio() we get an unlocked folio, so it is possible
for a different thread to concurrently modify folio->mapping. We must
check that this hasn't happened once we do have the lock.
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
When we call btrfs_read_folio() to bring a folio uptodate, we unlock the
folio. The result of that is that a different thread can modify the
mapping (like remove it with invalidate) before we call folio_lock().
This results in an invalid page and we need to try again.
In particular, if we are relocating concurrently with aborting a
transaction, this can result in a crash like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 76 PID: 1411631 Comm: kworker/u322:5
Workqueue: events_unbound btrfs_reclaim_bgs_work
RIP: 0010:set_page_extent_mapped+0x20/0xb0
RSP: 0018:ffffc900516a7be8 EFLAGS: 00010246
RAX: ffffea009e851d08 RBX: ffffea009e0b1880 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffc900516a7b90 RDI: ffffea009e0b1880
RBP: 0000000003573000 R08: 0000000000000001 R09: ffff88c07fd2f3f0
R10: 0000000000000000 R11: 0000194754b575be R12: 0000000003572000
R13: 0000000003572fff R14: 0000000000100cca R15: 0000000005582fff
FS: 0000000000000000(0000) GS:ffff88c07fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000407d00f002 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x78/0xc0
? page_fault_oops+0x2a8/0x3a0
? __switch_to+0x133/0x530
? wq_worker_running+0xa/0x40
? exc_page_fault+0x63/0x130
? asm_exc_page_fault+0x22/0x30
? set_page_extent_mapped+0x20/0xb0
relocate_file_extent_cluster+0x1a7/0x940
relocate_data_extent+0xaf/0x120
relocate_block_group+0x20f/0x480
btrfs_relocate_block_group+0x152/0x320
btrfs_relocate_chunk+0x3d/0x120
btrfs_reclaim_bgs_work+0x2ae/0x4e0
process_scheduled_works+0x184/0x370
worker_thread+0xc6/0x3e0
? blk_add_timer+0xb0/0xb0
kthread+0xae/0xe0
? flush_tlb_kernel_range+0x90/0x90
ret_from_fork+0x2f/0x40
? flush_tlb_kernel_range+0x90/0x90
ret_from_fork_asm+0x11/0x20
</TASK>
This occurs because cleanup_one_transaction() calls
destroy_delalloc_inodes() which calls invalidate_inode_pages2() which
takes the folio_lock before setting mapping to NULL. We fail to check
this, and subsequently call set_extent_mapping(), which assumes that
mapping != NULL (in fact it asserts that in debug mode)
Note that the "fixes" patch here is not the one that introduced the
race (the very first iteration of this code from 2009) but a more recent
change that made this particular crash happen in practice.
Fixes: e7f1326cc2 ("btrfs: set page extent mapped after read_folio in relocate_one_page")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
When a COWing a tree block, at btrfs_cow_block(), and we have the
tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled
(CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent
buffer while inside the tracepoint code. This is because in some paths
that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding
the last reference on the extent buffer @buf so btrfs_force_cow_block()
drops the last reference on the @buf extent buffer when it calls
free_extent_buffer_stale(buf), which schedules the release of the extent
buffer with RCU. This means that if we are on a kernel with preemption,
the current task may be preempted before calling trace_btrfs_cow_block()
and the extent buffer already released by the time trace_btrfs_cow_block()
is called, resulting in a use-after-free.
Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to
btrfs_force_cow_block() before the COWed extent buffer is freed.
This also has a side effect of invoking the tracepoint in the tree defrag
code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is
called there, but this is fine and it was actually missing there.
Reported-by: syzbot+8517da8635307182c8a5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/6759a9b9.050a0220.1ac542.000d.GAE@google.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a use-after-free in the I/O completion path for encoded reads by
using a completion instead of a wait_queue for synchronizing the
destruction of 'struct btrfs_encoded_read_private'.
Fixes: 1881fba89b ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=AAmb
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- tree-checker catches invalid number of inline extent references
- zoned mode fixes:
- enhance zone append IO command so it also detects emulated writes
- handle bio splitting at sectorsize boundary
- when deleting a snapshot, fix a condition for visiting nodes in reloc
trees
* tag 'for-6.13-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: tree-checker: reject inline extent items with 0 ref count
btrfs: split bios to the fs sector size boundary
btrfs: use bio_is_zone_append() in the completion handler
btrfs: fix improper generation check in snapshot delete
[BUG]
There is a bug report in the mailing list where btrfs_run_delayed_refs()
failed to drop the ref count for logical 25870311358464 num_bytes
2113536.
The involved leaf dump looks like this:
item 166 key (25870311358464 168 2113536) itemoff 10091 itemsize 50
extent refs 1 gen 84178 flags 1
ref#0: shared data backref parent 32399126528000 count 0 <<<
ref#1: shared data backref parent 31808973717504 count 1
Notice the count number is 0.
[CAUSE]
There is no concrete evidence yet, but considering 0 -> 1 is also a
single bit flipped, it's possible that hardware memory bitflip is
involved, causing the on-disk extent tree to be corrupted.
[FIX]
To prevent us reading such corrupted extent item, or writing such
damaged extent item back to disk, enhance the handling of
BTRFS_EXTENT_DATA_REF_KEY and BTRFS_SHARED_DATA_REF_KEY keys for both
inlined and key items, to detect such 0 ref count and reject them.
CC: stable@vger.kernel.org # 5.4+
Link: https://lore.kernel.org/linux-btrfs/7c69dd49-c346-4806-86e7-e6f863a66f48@app.fastmail.com/
Reported-by: Frankie Fisher <frankie@terrorise.me.uk>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs like other file systems can't really deal with I/O not aligned to
it's internal block size (which strangely is called sector size in
btrfs, for historical reasons), but the block layer split helper doesn't
even know about that.
Round down the split boundary so that all I/Os are aligned.
Fixes: d5e4377d50 ("btrfs: split zone append bios in btrfs_submit_bio")
CC: stable@vger.kernel.org # 6.12
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Otherwise it won't catch bios turned into regular writes by the block
level zone write plugging. The additional test it adds is for emulated
zone append.
Fixes: 9b1ce7f0c6 ("block: Implement zone append emulation")
CC: stable@vger.kernel.org # 6.12
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have been using the following check
if (generation <= root->root_key.offset)
to make decisions about whether or not to visit a node during snapshot
delete. This is because for normal subvolumes this is set to 0, and for
snapshots it's set to the creation generation. The idea being that if
the generation of the node is less than or equal to our creation
generation then we don't need to visit that node, because it doesn't
belong to us, we can simply drop our reference and move on.
However reloc roots don't have their generation stored in
root->root_key.offset, instead that is the objectid of their
corresponding fs root. This means we can incorrectly not walk into
nodes that need to be dropped when deleting a reloc root.
There are a variety of consequences to making the wrong choice in two
distinct areas.
visit_node_for_delete()
1. False positive. We think we are newer than the block when we really
aren't. We don't visit the node and drop our reference to the node
and carry on. This would result in leaked space.
2. False negative. We do decide to walk down into a block that we
should have just dropped our reference to. However this means that
the child node will have refs > 1, so we will switch to
UPDATE_BACKREF, and then the subsequent walk_down_proc() will notice
that btrfs_header_owner(node) != root->root_key.objectid and it'll
break out of the loop, and then walk_up_proc() will drop our reference,
so this appears to be ok.
do_walk_down()
1. False positive. We are in UPDATE_BACKREF and incorrectly decide that
we are done and don't need to update the backref for our lower nodes.
This is another case that simply won't happen with relocation, as we
only have to do UPDATE_BACKREF if the node below us was shared and
didn't have FULL_BACKREF set, and since we don't own that node
because we're a reloc root we actually won't end up in this case.
2. False negative. Again this is tricky because as described above, we
simply wouldn't be here from relocation, because we don't own any of
the nodes because we never set btrfs_header_owner() to the reloc root
objectid, and we always use FULL_BACKREF, we never actually need to
set FULL_BACKREF on any children.
Having spent a lot of time stressing relocation/snapshot delete recently
I've not seen this pop in practice. But this is objectively incorrect,
so fix this to get the correct starting generation based on the root
we're dropping to keep me from thinking there's a problem here.
CC: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We queue up inodes to be defrag'ed asynchronously, which means we do not
have their original file for readahead. This means that the code to
skip readahead on pre-content watched files will not run, and we could
potentially read in empty pages.
Handle this corner case by disabling defrag on files that are currently
being watched for pre-content events.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/4cc5bcea13db7904174353d08e85157356282a59.1731684329.git.josef@toxicpanda.com
-----BEGIN PGP SIGNATURE-----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=+DUB
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes. Apart from the one liners and updated bio splitting
error handling there's a fix for subvolume mount with different flags.
This was known and fixed for some time but I've delayed it to give it
more testing.
- fix unbalanced locking when swapfile activation fails when the
subvolume gets deleted in the meantime
- add btrfs error handling after bio_split() calls that got error
handling recently
- during unmount, flush delalloc workers at the right time before the
cleaner thread is shut down
- fix regression in buffered write folio conversion, explicitly wait
for writeback as FGP_STABLE flag is currently a no-op on btrfs
- handle race in subvolume mount with different flags, the conversion
to the new mount API did not handle the case where multiple
subvolumes get mounted in parallel, which is a distro use case"
* tag 'for-6.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
btrfs: handle bio_split() errors
btrfs: properly wait for writeback before buffered write
btrfs: fix missing snapshot drew unlock when root is dead during swap activation
btrfs: fix mount failure due to remount races
Commit e546fe1da9 ("block: Rework bio_split() return value") changed
bio_split() so that it can return errors.
Add error handling for it in btrfs_split_bio() and ultimately
btrfs_submit_chunk(). As the bio is not submitted, the bio counter must
be decremented to pair btrfs_bio_counter_inc_blocked().
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Before commit e820dbeb6a ("btrfs: convert btrfs_buffered_write() to
use folios"), function prepare_one_folio() will always wait for folio
writeback to finish before returning the folio.
However commit e820dbeb6a ("btrfs: convert btrfs_buffered_write() to
use folios") changed to use FGP_STABLE to do the writeback wait, but
FGP_STABLE is calling folio_wait_stable(), which only calls
folio_wait_writeback() if the address space has AS_STABLE_WRITES, which
is not set for btrfs inodes.
This means we will not wait for the folio writeback at all.
[CAUSE]
The cause is FGP_STABLE is not waiting for writeback unconditionally, but
only for address spaces with AS_STABLE_WRITES, normally such flag is set
when the super block has SB_I_STABLE_WRITES flag.
Such super block flag is set when the block device has hardware digest
support or has internal checksum requirement.
I'd argue btrfs should set such super block due to its default data
checksum behavior, but it is not set yet, so this means FGP_STABLE flag
will have no effect at all.
(For NODATASUM inodes, we can skip the waiting in theory but that should
be an optimization in the future.)
This can lead to data checksum mismatch, as we can modify the folio
while it's still under writeback, this will make the contents differ
from the contents at submission and checksum calculation.
[FIX]
Instead of fully relying on FGP_STABLE, manually do the folio writeback
waiting, until we set the address space or super flag.
Fixes: e820dbeb6a ("btrfs: convert btrfs_buffered_write() to use folios")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When activating a swap file we acquire the root's snapshot drew lock and
then check if the root is dead, failing and returning with -EPERM if it's
dead but without unlocking the root's snapshot lock. Fix this by adding
the missing unlock.
Fixes: 60021bd754 ("btrfs: prevent subvol with swapfile from being deleted")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The following reproducer can cause btrfs mount to fail:
dev="/dev/test/scratch1"
mnt1="/mnt/test"
mnt2="/mnt/scratch"
mkfs.btrfs -f $dev
mount $dev $mnt1
btrfs subvolume create $mnt1/subvol1
btrfs subvolume create $mnt1/subvol2
umount $mnt1
mount $dev $mnt1 -o subvol=subvol1
while mount -o remount,ro $mnt1; do mount -o remount,rw $mnt1; done &
bg=$!
while mount $dev $mnt2 -o subvol=subvol2; do umount $mnt2; done
kill $bg
wait
umount -R $mnt1
umount -R $mnt2
The script will fail with the following error:
mount: /mnt/scratch: /dev/mapper/test-scratch1 already mounted on /mnt/test.
dmesg(1) may have more information after failed mount system call.
umount: /mnt/test: target is busy.
umount: /mnt/scratch/: not mounted
And there is no kernel error message.
[CAUSE]
During the btrfs mount, to support mounting different subvolumes with
different RO/RW flags, we need to detect that and retry if needed:
Retry with matching RO flags if the initial mount fail with -EBUSY.
The problem is, during that retry we do not hold any super block lock
(s_umount), this means there can be a remount process changing the RO
flags of the original fs super block.
If so, we can have an EBUSY error during retry. And this time we treat
any failure as an error, without any retry and cause the above EBUSY
mount failure.
[FIX]
The current retry behavior is racy because we do not have a super block
thus no way to hold s_umount to prevent the race with remount.
Solve the root problem by allowing fc->sb_flags to mismatch from the
sb->s_flags at btrfs_get_tree_super().
Then at the re-entry point btrfs_get_tree_subvol(), manually check the
fc->s_flags against sb->s_flags, if it's a RO->RW mismatch, then
reconfigure with s_umount lock hold.
Reported-by: Enno Gotthold <egotthold@suse.com>
Reported-by: Fabian Vogt <fvogt@suse.com>
[ Special thanks for the reproducer and early analysis pointing to btrfs. ]
Fixes: f044b31867 ("btrfs: handle the ro->rw transition for mounting different subvolumes")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1231836
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=4mFO
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- add lockdep annotations for io_uring/encoded read integration, inode
lock is held when returning to userspace
- properly reflect experimental config option to sysfs
- handle NULL root in case the rescue mode accepts invalid/damaged tree
roots (rescue=ibadroot)
- regression fix of a deadlock between transaction and extent locks
- fix pending bio accounting bug in encoded read ioctl
- fix NOWAIT mode when checking references for NOCOW files
- fix use-after-free in a rb-tree cleanup in ref-verify debugging tool
* tag 'for-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep warnings on io_uring encoded reads
btrfs: ref-verify: fix use-after-free after invalid ref action
btrfs: add a sanity check for btrfs root in btrfs_search_slot()
btrfs: don't loop for nowait writes when checking for cross references
btrfs: sysfs: advertise experimental features only if CONFIG_BTRFS_EXPERIMENTAL=y
btrfs: fix deadlock between transaction commits and extent locks
btrfs: fix use-after-free in btrfs_encoded_read_endio()
Lockdep doesn't like the fact that btrfs_uring_read_extent() returns to
userspace still holding the inode lock, even though we release it once
the I/O finishes. Add calls to rwsem_release() and rwsem_acquire_read() to
work round this.
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
34310c442e ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)")
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Syzbot reports a null-ptr-deref in btrfs_search_slot().
The reproducer is using rescue=ibadroots, and the extent tree root is
corrupted thus the extent tree is NULL.
When scrub tries to search the extent tree to gather the needed extent
info, btrfs_search_slot() doesn't check if the target root is NULL or
not, resulting the null-ptr-deref.
Add sanity check for btrfs root before using it in btrfs_search_slot().
Reported-by: syzbot+3030e17bd57a73d39bd7@syzkaller.appspotmail.com
Fixes: 42437a6386 ("btrfs: introduce mount option rescue=ignorebadroots")
Link: https://syzkaller.appspot.com/bug?extid=3030e17bd57a73d39bd7
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: syzbot+3030e17bd57a73d39bd7@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When checking for delayed refs when verifying if there are cross
references for a data extent, we stop if the path has nowait set and we
can't try lock the delayed ref head's mutex, returning -EAGAIN with the
goal of making a write fallback to a blocking context. However we ignore
the -EAGAIN at btrfs_cross_ref_exist() when check_delayed_ref() returns
it, and keep looping instead of immediately returning the -EAGAIN to the
caller.
Fix this by not looping if we get -EAGAIN and we have a nowait path.
Fixes: 26ce911446 ("btrfs: make can_nocow_extent nowait compatible")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are advertising experimental features through sysfs if
CONFIG_BTRFS_DEBUG is set, without looking if CONFIG_BTRFS_EXPERIMENTAL
is set. This is wrong as it will result in reporting experimental
features as supported when CONFIG_BTRFS_EXPERIMENTAL is not set but
CONFIG_BTRFS_DEBUG is set.
Fix this by checking for CONFIG_BTRFS_EXPERIMENTAL instead of
CONFIG_BTRFS_DEBUG.
Fixes: 67cd3f2217 ("btrfs: split out CONFIG_BTRFS_EXPERIMENTAL from CONFIG_BTRFS_DEBUG")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When running a workload with fsstress and duperemove (generic/561) we can
hit a deadlock related to transaction commits and locking extent ranges,
as described below.
Task A hanging during a transaction commit, waiting for all other writers
to complete:
[178317.334817] INFO: task fsstress:555623 blocked for more than 120 seconds.
[178317.335693] Not tainted 6.12.0-rc6-btrfs-next-179+ #1
[178317.336528] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[178317.337673] task:fsstress state:D stack:0 pid:555623 tgid:555623 ppid:555620 flags:0x00004002
[178317.337679] Call Trace:
[178317.337681] <TASK>
[178317.337685] __schedule+0x364/0xbe0
[178317.337691] schedule+0x26/0xa0
[178317.337695] btrfs_commit_transaction+0x5c5/0x1050 [btrfs]
[178317.337769] ? start_transaction+0xc4/0x800 [btrfs]
[178317.337815] ? __pfx_autoremove_wake_function+0x10/0x10
[178317.337819] btrfs_mksubvol+0x381/0x640 [btrfs]
[178317.337878] btrfs_mksnapshot+0x7a/0xb0 [btrfs]
[178317.337935] __btrfs_ioctl_snap_create+0x1bb/0x1d0 [btrfs]
[178317.337995] btrfs_ioctl_snap_create_v2+0x103/0x130 [btrfs]
[178317.338053] btrfs_ioctl+0x29b/0x2a90 [btrfs]
[178317.338118] ? kmem_cache_alloc_noprof+0x5f/0x2c0
[178317.338126] ? getname_flags+0x45/0x1f0
[178317.338133] ? _raw_spin_unlock+0x15/0x30
[178317.338145] ? __x64_sys_ioctl+0x88/0xc0
[178317.338149] __x64_sys_ioctl+0x88/0xc0
[178317.338152] do_syscall_64+0x4a/0x110
[178317.338160] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[178317.338190] RIP: 0033:0x7f13c28e271b
Which corresponds to line 2361 of transaction.c:
$ cat -n fs/btrfs/transaction.c
(...)
2162 int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
2163 {
(...)
2349 spin_lock(&fs_info->trans_lock);
2350 add_pending_snapshot(trans);
2351 cur_trans->state = TRANS_STATE_COMMIT_DOING;
2352 spin_unlock(&fs_info->trans_lock);
2353
2354 /*
2355 * The thread has started/joined the transaction thus it holds the
2356 * lockdep map as a reader. It has to release it before acquiring the
2357 * lockdep map as a writer.
2358 */
2359 btrfs_lockdep_release(fs_info, btrfs_trans_num_writers);
2360 btrfs_might_wait_for_event(fs_info, btrfs_trans_num_writers);
2361 wait_event(cur_trans->writer_wait,
2362 atomic_read(&cur_trans->num_writers) == 1);
(...)
The transaction is in the TRANS_STATE_COMMIT_DOING state and so it's
waiting for all other existing writers to complete and release their
transaction handle.
Task B is running ordered extent completion and blocked waiting to lock an
extent range in an inode's io tree:
[178317.327411] INFO: task kworker/u48:8:554545 blocked for more than 120 seconds.
[178317.328630] Not tainted 6.12.0-rc6-btrfs-next-179+ #1
[178317.329635] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[178317.330872] task:kworker/u48:8 state:D stack:0 pid:554545 tgid:554545 ppid:2 flags:0x00004000
[178317.330878] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[178317.330944] Call Trace:
[178317.330945] <TASK>
[178317.330947] __schedule+0x364/0xbe0
[178317.330952] schedule+0x26/0xa0
[178317.330955] __lock_extent+0x337/0x3a0 [btrfs]
[178317.331014] ? __pfx_autoremove_wake_function+0x10/0x10
[178317.331017] btrfs_finish_one_ordered+0x47a/0xaa0 [btrfs]
[178317.331074] ? psi_group_change+0x132/0x2d0
[178317.331078] btrfs_work_helper+0xbd/0x370 [btrfs]
[178317.331140] process_scheduled_works+0xd3/0x460
[178317.331144] ? __pfx_worker_thread+0x10/0x10
[178317.331146] worker_thread+0x121/0x250
[178317.331149] ? __pfx_worker_thread+0x10/0x10
[178317.331151] kthread+0xe9/0x120
[178317.331154] ? __pfx_kthread+0x10/0x10
[178317.331157] ret_from_fork+0x2d/0x50
[178317.331159] ? __pfx_kthread+0x10/0x10
[178317.331162] ret_from_fork_asm+0x1a/0x30
This extent range locking happens after joining the current transaction,
so task A is waiting for task B to release its transaction handle
(decrementing the transaction's num_writers counter).
Task C while doing a fiemap it tries to join the current transaction:
[242682.812815] task:pool state:D stack:0 pid:560767 tgid:560724 ppid:555622 flags:0x00004006
[242682.812827] Call Trace:
[242682.812856] <TASK>
[242682.812864] __schedule+0x364/0xbe0
[242682.812879] ? _raw_spin_unlock_irqrestore+0x23/0x40
[242682.812897] schedule+0x26/0xa0
[242682.812909] wait_current_trans+0xd6/0x130 [btrfs]
[242682.813148] ? __pfx_autoremove_wake_function+0x10/0x10
[242682.813162] start_transaction+0x3d4/0x800 [btrfs]
[242682.813399] btrfs_is_data_extent_shared+0xd2/0x440 [btrfs]
[242682.813723] fiemap_process_hole+0x2a2/0x300 [btrfs]
[242682.813995] extent_fiemap+0x9b8/0xb80 [btrfs]
[242682.814249] btrfs_fiemap+0x78/0xc0 [btrfs]
[242682.814501] do_vfs_ioctl+0x2db/0xa50
[242682.814519] __x64_sys_ioctl+0x6a/0xc0
[242682.814531] do_syscall_64+0x4a/0x110
[242682.814544] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[242682.814556] RIP: 0033:0x7efff595e71b
It tries to join the current transaction, but it can't because the
transaction is in the TRANS_STATE_COMMIT_DOING state, so
join_transaction() returns -EBUSY to start_transaction() and makes it
wait for the current transaction to complete. And while it's waiting
for the transaction to complete, it's holding an extent range locked
in the same inode that task B is operating, which causes a deadlock
between these 3 tasks. The extent range for the inode was locked at
the start of the fiemap operation, early at extent_fiemap().
In short these tasks deadlock because:
1) Task A is waiting for task B to release its transaction handle;
2) Task B is waiting to lock an extent range for an inode while holding a
transaction handle open;
3) Task C is waiting for the current transaction to complete (for task A
to finish the transaction commit) while holding the extent range for
the inode locked, so task B can't progress and release its transaction
handle.
This results in an ABBA deadlock involving transaction commits and extent
locks. Extent locks are higher level locks, like inode VFS locks, and
should always be acquired before joining or starting a transaction, but
recently commit 2206265f41 ("btrfs: remove code duplication in ordered
extent finishing") accidentally changed btrfs_finish_one_ordered() to do
the transaction join before locking the extent range.
Fix this by making sure that btrfs_finish_one_ordered() always locks the
extent before joining a transaction and add an explicit comment about the
need for this order.
Fixes: 2206265f41 ("btrfs: remove code duplication in ordered extent finishing")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Shinichiro reported the following use-after free that sometimes is
happening in our CI system when running fstests' btrfs/284 on a TCMU
runner device:
BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219
CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
? lock_release+0x708/0x780
print_report+0x174/0x505
? lock_release+0x708/0x780
? __virt_addr_valid+0x224/0x410
? lock_release+0x708/0x780
kasan_report+0xda/0x1b0
? lock_release+0x708/0x780
? __wake_up+0x44/0x60
lock_release+0x708/0x780
? __pfx_lock_release+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? lock_is_held_type+0x9a/0x110
_raw_spin_unlock_irqrestore+0x1f/0x60
__wake_up+0x44/0x60
btrfs_encoded_read_endio+0x14b/0x190 [btrfs]
btrfs_check_read_bio+0x8d9/0x1360 [btrfs]
? lock_release+0x1b0/0x780
? trace_lock_acquire+0x12f/0x1a0
? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs]
? process_one_work+0x7e3/0x1460
? lock_acquire+0x31/0xc0
? process_one_work+0x7e3/0x1460
process_one_work+0x85c/0x1460
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5e6/0xfc0
? __pfx_worker_thread+0x10/0x10
kthread+0x2c3/0x3a0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x4f/0x70
kfree+0x143/0x490
btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff888106a83f00
which belongs to the cache kmalloc-rnd-07-96 of size 96
The buggy address is located 24 bytes inside of
freed 96-byte region [ffff888106a83f00, ffff888106a83f60)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83
flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004
raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Further analyzing the trace and the crash dump's vmcore file shows that
the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on
the wait_queue that is in the private data passed to the end_io handler.
Commit 4ff47df40447 ("btrfs: move priv off stack in
btrfs_encoded_read_regular_fill_pages()") moved 'struct
btrfs_encoded_read_private' off the stack.
Before that commit one can see a corruption of the private data when
analyzing the vmcore after a crash:
*(struct btrfs_encoded_read_private *)0xffff88815626eec8 = {
.wait = (wait_queue_head_t){
.lock = (spinlock_t){
.rlock = (struct raw_spinlock){
.raw_lock = (arch_spinlock_t){
.val = (atomic_t){
.counter = (int)-2005885696,
},
.locked = (u8)0,
.pending = (u8)157,
.locked_pending = (u16)40192,
.tail = (u16)34928,
},
.magic = (unsigned int)536325682,
.owner_cpu = (unsigned int)29,
.owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0,
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 },
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.head = (struct list_head){
.next = (struct list_head *)0x112cca,
.prev = (struct list_head *)0x47,
},
},
.pending = (atomic_t){
.counter = (int)-1491499288,
},
.status = (blk_status_t)130,
}
Here we can see several indicators of in-memory data corruption, e.g. the
large negative atomic values of ->pending or
->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic
0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus
pointer values for ->wait->head.
To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the
corruption, as atomic_dec_return() is defined as two instructions on
x86_64, whereas atomic_dec_and_test() is defined as a single atomic
operation. This can lead to a situation where counter value is already
decremented but the if statement in btrfs_encoded_read_endio() is not
completely processed, i.e. the 0 test has not completed. If another thread
continues executing btrfs_encoded_read_regular_fill_pages() the
atomic_dec_return() there can see an already updated ->pending counter and
continues by freeing the private data. Continuing in the endio handler the
test for 0 succeeds and the wait_queue is woken up, resulting in a
use-after-free.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Fixes: 1881fba89b ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- Constify range_contains() input parameters to prevent changes.
- Add support for displaying RCD capabilities in sysfs to support lspci for CXL device.
- Downgrade warning message to debug in cxl_probe_component_regs().
- Add support for adding a printf specifier '$pra' to emit 'struct range' content.
- Add sanity tests for 'struct resource'.
- Add documentation for special case.
- Add %pra for 'struct range'.
- Add %pra usage in CXL code.
- Add preparation code for DCD support
- Add range_overlaps().
- Add CDAT DSMAS table shared and read only flag in ACPICA.
- Add documentation to 'struct dev_dax_range'.
- Delay event buffer allocation in CXL PCI code until needed.
- Use guard() in cxl_dpa_set_mode().
- Refactor create region code to consolidate common code.
-----BEGIN PGP SIGNATURE-----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=GNlu
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dave Jiang:
- Constify range_contains() input parameters to prevent changes
- Add support for displaying RCD capabilities in sysfs to support lspci
for CXL device
- Downgrade warning message to debug in cxl_probe_component_regs()
- Add support for adding a printf specifier '%pra' to emit 'struct
range' content:
- Add sanity tests for 'struct resource'
- Add documentation for special case
- Add %pra for 'struct range'
- Add %pra usage in CXL code
- Add preparation code for DCD support:
- Add range_overlaps()
- Add CDAT DSMAS table shared and read only flag in ACPICA
- Add documentation to 'struct dev_dax_range'
- Delay event buffer allocation in CXL PCI code until needed
- Use guard() in cxl_dpa_set_mode()
- Refactor create region code to consolidate common code
* tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Refactor common create region code
cxl/hdm: Use guard() in cxl_dpa_set_mode()
cxl/pci: Delay event buffer allocation
dax: Document struct dev_dax_range
ACPI/CDAT: Add CDAT/DSMAS shared and read only flag values
range: Add range_overlaps()
cxl/cdat: Use %pra for dpa range outputs
printf: Add print format (%pra) for struct range
Documentation/printf: struct resource add start == end special case
test printf: Add very basic struct resource tests
cxl: downgrade a warning message to debug level in cxl_probe_component_regs()
cxl/pci: Add sysfs attribute for CXL 1.1 device link status
cxl/core/regs: Add rcd_pcie_cap initialization
kernel/range: Const-ify range_contains parameters
-----BEGIN PGP SIGNATURE-----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=PWTH
-----END PGP SIGNATURE-----
Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
-----BEGIN PGP SIGNATURE-----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=aAcf
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
task (the rest will go via the block git tree).
User visible changes:
- wire encoded read (ioctl) to io_uring commands, this can be used on
itself, in the future this will allow 'send' to be asynchronous. As
a consequence, the encoded read ioctl can also work in non-blocking
mode
- new ioctl to wait for cleaned subvolumes, no need to use the
generic and root-only SEARCH_TREE ioctl, will be used by "btrfs
subvol sync"
- recognize different paths/symlinks for the same devices and don't
report them during rescanning, this can be observed with LVM or DM
- seeding device use case change, the sprout device (the one
capturing new writes) will not clear the read-only status of the
super block; this prevents accumulating space from deleted
snapshots
Performance improvements:
- reduce lock contention when traversing extent buffers
- reduce extent tree lock contention when searching for inline
backref
- switch from rb-trees to xarray for delayed ref tracking,
improvements due to better cache locality, branching factors and
more compact data structures
- enable extent map shrinker again (prevent memory exhaustion under
some types of IO load), reworked to run in a single worker thread
(there used to be problems causing long stalls under memory
pressure)
Core changes:
- raid-stripe-tree feature updates:
- make device replace and scrub work
- implement partial deletion of stripe extents
- new selftests
- split the config option BTRFS_DEBUG and add EXPERIMENTAL for
features that are experimental or with known problems so we don't
misuse debugging config for that
- subpage mode updates (sector < page):
- update compression implementations
- update writepage, writeback
- continued folio API conversions:
- buffered writes
- make buffered write copy one page at a time, preparatory work for
future integration with large folios, may cause performance drop
- proper locking of root item regarding starting send
- error handling improvements
- code cleanups and refactoring:
- dead code removal
- unused parameter reduction
- lockdep assertions"
* tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (119 commits)
btrfs: send: check for read-only send root under critical section
btrfs: send: check for dead send root under critical section
btrfs: remove check for NULL fs_info at btrfs_folio_end_lock_bitmap()
btrfs: fix warning on PTR_ERR() against NULL device at btrfs_control_ioctl()
btrfs: fix a typo in btrfs_use_zone_append
btrfs: avoid superfluous calls to free_extent_map() in btrfs_encoded_read()
btrfs: simplify logic to decrement snapshot counter at btrfs_mksnapshot()
btrfs: remove hole from struct btrfs_delayed_node
btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list
btrfs: add new ioctl to wait for cleaned subvolumes
btrfs: simplify range tracking in cow_file_range()
btrfs: remove conditional path allocation in btrfs_read_locked_inode()
btrfs: push cleanup into btrfs_read_locked_inode()
io_uring/cmd: let cmds to know about dying task
btrfs: add struct io_btrfs_cmd as type for io_uring_cmd_to_pdu()
btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)
btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
btrfs: don't sleep in btrfs_encoded_read() if IOCB_NOWAIT is set
btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
btrfs: remove pointless iocb::ki_pos addition in btrfs_encoded_read()
...
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcUQAAKCRCRxhvAZXjc
onEpAQCUdwIBHpwmSIFvJFA9aNGpbLzi0dDSEIxuWYtp5qVuogD+ImccwqpG3kEi
Zq9vokdPpB1zbahxKl1mkvBG4G0GFQE=
=LbP6
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.pagecache' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pagecache updates from Christian Brauner:
"Cleanup filesystem page flag usage: This continues the work to make
the mappedtodisk/owner_2 flag available to filesystems which don't use
buffer heads. Further patches remove uses of Private2. This brings us
very close to being rid of it entirely"
* tag 'vfs-6.13.pagecache' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
migrate: Remove references to Private2
ceph: Remove call to PagePrivate2()
btrfs: Switch from using the private_2 flag to owner_2
mm: Remove PageMappedToDisk
nilfs2: Convert nilfs_copy_buffer() to use folios
fs: Move clearing of mappedtodisk to buffer.c
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcToAAKCRCRxhvAZXjc
osL9AP948FFumJRC28gDJ4xp+X4eohNOfkgoEG8FTbF2zU6ulwD+O0pr26FqpFli
pqlG+38UdATImpfqqWjPbb72sBYcfQg=
=wLUh
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Fixup and improve NLM and kNFSD file lock callbacks
Last year both GFS2 and OCFS2 had some work done to make their
locking more robust when exported over NFS. Unfortunately, part of
that work caused both NLM (for NFS v3 exports) and kNFSD (for
NFSv4.1+ exports) to no longer send lock notifications to clients
This in itself is not a huge problem because most NFS clients will
still poll the server in order to acquire a conflicted lock
It's important for NLM and kNFSD that they do not block their
kernel threads inside filesystem's file_lock implementations
because that can produce deadlocks. We used to make sure of this by
only trusting that posix_lock_file() can correctly handle blocking
lock calls asynchronously, so the lock managers would only setup
their file_lock requests for async callbacks if the filesystem did
not define its own lock() file operation
However, when GFS2 and OCFS2 grew the capability to correctly
handle blocking lock requests asynchronously, they started
signalling this behavior with EXPORT_OP_ASYNC_LOCK, and the check
for also trusting posix_lock_file() was inadvertently dropped, so
now most filesystems no longer produce lock notifications when
exported over NFS
Fix this by using an fop_flag which greatly simplifies the problem
and grooms the way for future uses by both filesystems and lock
managers alike
- Add a sysctl to delete the dentry when a file is removed instead of
making it a negative dentry
Commit 681ce86235 ("vfs: Delete the associated dentry when
deleting a file") introduced an unconditional deletion of the
associated dentry when a file is removed. However, this led to
performance regressions in specific benchmarks, such as
ilebench.sum_operations/s, prompting a revert in commit
4a4be1ad3a ("Revert "vfs: Delete the associated dentry when
deleting a file""). This reintroduces the concept conditionally
through a sysctl
- Expand the statmount() system call:
* Report the filesystem subtype in a new fs_subtype field to
e.g., report fuse filesystem subtypes
* Report the superblock source in a new sb_source field
* Add a new way to return filesystem specific mount options in an
option array that returns filesystem specific mount options
separated by zero bytes and unescaped. This allows caller's to
retrieve filesystem specific mount options and immediately pass
them to e.g., fsconfig() without having to unescape or split
them
* Report security (LSM) specific mount options in a separate
security option array. We don't lump them together with
filesystem specific mount options as security mount options are
generic and most users aren't interested in them
The format is the same as for the filesystem specific mount
option array
- Support relative paths in fsconfig()'s FSCONFIG_SET_STRING command
- Optimize acl_permission_check() to avoid costly {g,u}id ownership
checks if possible
- Use smp_mb__after_spinlock() to avoid full smp_mb() in evict()
- Add synchronous wakeup support for ep_poll_callback.
Currently, epoll only uses wake_up() to wake up task. But sometimes
there are epoll users which want to use the synchronous wakeup flag
to give a hint to the scheduler, e.g., the Android binder driver.
So add a wake_up_sync() define, and use wake_up_sync() when sync is
true in ep_poll_callback()
Fixes:
- Fix kernel documentation for inode_insert5() and iget5_locked()
- Annotate racy epoll check on file->f_ep
- Make F_DUPFD_QUERY associative
- Avoid filename buffer overrun in initramfs
- Don't let statmount() return empty strings
- Add a cond_resched() to dump_user_range() to avoid hogging the CPU
- Don't query the device logical blocksize multiple times for hfsplus
- Make filemap_read() check that the offset is positive or zero
Cleanups:
- Various typo fixes
- Cleanup wbc_attach_fdatawrite_inode()
- Add __releases annotation to wbc_attach_and_unlock_inode()
- Add hugetlbfs tracepoints
- Fix various vfs kernel doc parameters
- Remove obsolete TODO comment from io_cancel()
- Convert wbc_account_cgroup_owner() to take a folio
- Fix comments for BANDWITH_INTERVAL and wb_domain_writeout_add()
- Reorder struct posix_acl to save 8 bytes
- Annotate struct posix_acl with __counted_by()
- Replace one-element array with flexible array member in freevxfs
- Use idiomatic atomic64_inc_return() in alloc_mnt_ns()"
* tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
statmount: retrieve security mount options
vfs: make evict() use smp_mb__after_spinlock instead of smp_mb
statmount: add flag to retrieve unescaped options
fs: add the ability for statmount() to report the sb_source
writeback: wbc_attach_fdatawrite_inode out of line
writeback: add a __releases annoation to wbc_attach_and_unlock_inode
fs: add the ability for statmount() to report the fs_subtype
fs: don't let statmount return empty strings
fs:aio: Remove TODO comment suggesting hash or array usage in io_cancel()
hfsplus: don't query the device logical block size multiple times
freevxfs: Replace one-element array with flexible array member
fs: optimize acl_permission_check()
initramfs: avoid filename buffer overrun
fs/writeback: convert wbc_account_cgroup_owner to take a folio
acl: Annotate struct posix_acl with __counted_by()
acl: Realign struct posix_acl to save 8 bytes
epoll: Add synchronous wakeup support for ep_poll_callback
coredump: add cond_resched() to dump_user_range
mm/page-writeback.c: Fix comment of wb_domain_writeout_add()
mm/page-writeback.c: Update comment for BANDWIDTH_INTERVAL
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcScQAKCRCRxhvAZXjc
oj+5AP4k822a77wc/3iPFk379naIvQ4dsrgemh0/Pb6ZvzvkFQEAi3vFCfzCDR2x
SkJF/RwXXKZv6U31QXMRt2Qo6wfBuAc=
=nVlm
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs multigrain timestamps from Christian Brauner:
"This is another try at implementing multigrain timestamps. This time
with significant help from the timekeeping maintainers to reduce the
performance impact.
Thomas provided a base branch that contains the required timekeeping
interfaces for the VFS. It serves as the base for the multi-grain
timestamp work:
- Multigrain timestamps allow the kernel to use fine-grained
timestamps when an inode's attributes is being actively observed
via ->getattr(). With this support, it's possible for a file to get
a fine-grained timestamp, and another modified after it to get a
coarse-grained stamp that is earlier than the fine-grained time. If
this happens then the files can appear to have been modified in
reverse order, which breaks VFS ordering guarantees.
To prevent this, a floor value is maintained for multigrain
timestamps. Whenever a fine-grained timestamp is handed out, record
it, and when later coarse-grained stamps are handed out, ensure
they are not earlier than that value. If the coarse-grained
timestamp is earlier than the fine-grained floor, return the floor
value instead.
The timekeeper changes add a static singleton atomic64_t into
timekeeper.c that is used to keep track of the latest fine-grained
time ever handed out. This is tracked as a monotonic ktime_t value
to ensure that it isn't affected by clock jumps. Because it is
updated at different times than the rest of the timekeeper object,
the floor value is managed independently of the timekeeper via a
cmpxchg() operation, and sits on its own cacheline.
Two new public timekeeper interfaces are added:
(1) ktime_get_coarse_real_ts64_mg() fills a timespec64 with the
later of the coarse-grained clock and the floor time
(2) ktime_get_real_ts64_mg() gets the fine-grained clock value,
and tries to swap it into the floor. A timespec64 is filled
with the result.
- The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around
1 per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting
via NFSv3, which relies on timestamps to validate caches. A lot of
changes can happen in a jiffy, so timestamps aren't sufficient to
help the client decide when to invalidate the cache. Even with
NFSv4, a lot of exported filesystems don't properly support a
change attribute and are subject to the same problems with
timestamp granularity. Other applications have similar issues with
timestamps (e.g backup applications).
If we were to always use fine-grained timestamps, that would
improve the situation, but that becomes rather expensive, as the
underlying filesystem would have to log a lot more metadata
updates.
This adds a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in
inode->i_ctime_nsec as a flag that indicates whether the current
timestamps have been queried via stat() or the like. When it's set,
we allow the kernel to use a fine-grained timestamp iff it's
necessary to make the ctime show a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible
for a file being changed to get a fine-grained timestamp. A file
that is altered just a bit later can then get a coarse-grained one
that appears older than the earlier fine-grained time. This
violates timestamp ordering guarantees.
This is where the earlier mentioned timkeeping interfaces help. A
global monotonic atomic64_t value is kept that acts as a timestamp
floor. When we go to stamp a file, we first get the latter of the
current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it
with that value.
If it has been queried, then first see whether the current coarse
time is later than the existing ctime. If it is, then we accept
that value. If it isn't, then we get a fine-grained time and try to
swap that into the global floor. Whether that succeeds or fails, we
take the resulting floor time, convert it to realtime and try to
swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails,
since either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same
floor value as multigrain filesystems)"
* tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reduce pointer chasing in is_mgtime() test
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
timekeeping: Add percpu counter for tracking floor swap events
timekeeping: Add interfaces for handling timestamps with a floor value
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
-----BEGIN PGP SIGNATURE-----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=ssYj
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix that seems urgent and good to have in 6.12 final.
It could potentially lead to unexpected transaction aborts, due to
wrong comparison and order of processing of delayed refs"
* tag 'for-6.12-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect comparison for delayed refs
When I reworked delayed ref comparison in cf4f04325b ("btrfs: move
->parent and ->ref_root into btrfs_delayed_ref_node"), I made a mistake
and returned -1 for the case where ref1->ref_root was > than
ref2->ref_root. This is a subtle bug that can result in improper
delayed ref running order, which can result in transaction aborts.
Fixes: cf4f04325b ("btrfs: move ->parent and ->ref_root into btrfs_delayed_ref_node")
CC: stable@vger.kernel.org # 6.10+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Call blk_validate_limits on the queue limits used for zone append
splitting so that calculated values get filled in and any stacking
conflicts get cought.
Without this there isn't a max_zone_append_sectors limits as of commit
559218d43e ("block: pre-calculate max_zone_append_sectors").
Fixes: 559218d43e ("block: pre-calculate max_zone_append_sectors")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241113084541.34315-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're checking if the send root is read-only without being under the
protection of the root's root_item_lock spinlock, which is what protects
the root's flags when clearing the read-only flag, done at
btrfs_ioctl_subvol_setflags(). Furthermore, it should be done in the
same critical section that increments the root's send_in_progress counter,
as btrfs_ioctl_subvol_setflags() clears the read-only flag in the same
critical section that checks the counter's value.
So fix this by moving the read-only check under the critical section
delimited by the root's root_item_lock which also increments the root's
send_in_progress counter.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're checking if the send root is dead without the protection of the
root's root_item_lock spinlock, which is what protects the root's flags.
The inverse, setting the dead flag on a root, is done under the protection
of that lock, at btrfs_delete_subvolume(). Also checking and updating the
root's send_in_progress counter is supposed to be done in the same
critical section as checking for or setting the root dead flag, so that
these operations are done atomically as a single step (which is correctly
done by btrfs_delete_subvolume()).
So fix this by checking if the send root is dead in the same critical
section that updates the send_in_progress counter, which is protected by
the root's root_item_lock spinlock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Smatch complains about possibly dereferencing a NULL fs_info at
btrfs_folio_end_lock_bitmap():
fs/btrfs/subpage.c:332 btrfs_folio_end_lock_bitmap() warn: variable dereferenced before check 'fs_info' (see line 326)
because we access fs_info to set the 'start_bit' variable before doing the
check for a NULL fs_info.
However fs_info is never NULL, since in the only caller of
btrfs_folio_end_lock_bitmap() is extent_writepage(), where we have an
inode which always as a non-NULL fs_info.
So remove the check for a NULL fs_info at btrfs_folio_end_lock_bitmap().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Smatch complains about calling PTR_ERR() against a NULL pointer:
fs/btrfs/super.c:2272 btrfs_control_ioctl() warn: passing zero to 'PTR_ERR'
Fix this by calling PTR_ERR() against the device pointer only if it
contains an error.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
REQ_OP_ZONE_APPNED -> REQ_OP_ZONE_APPEND.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change the control flow of btrfs_encoded_read() so that it doesn't call
free_extent_map() when we know that this has already been done.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Suggested-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no point in having a 'snapshot_force_cow' variable to track if we
need to decrement the root->snapshot_force_cow counter, as we never jump
to the 'out' label after incrementing the counter. Simplify this by
removing the variable and always decrementing the counter before the 'out'
label, right after the call to btrfs_mksubvol().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The comment refers to a list in the respective delayed ref head that no
longer exists (ref_list), it was replaced with a rbtree (ref_tree) in
commit 0e0adbcfdc ("btrfs: track refs in a rb_tree instead of a list").
So update the stale comment to refer to the rbtree instead of the old
list.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a new unprivileged ioctl that will let the command
'btrfs subvolume sync' work without the (privileged) SEARCH_TREE ioctl.
There are several modes of operation, where the most common ones are to
wait on a specific subvolume or all currently queued for cleaning. This
is utilized e.g. in backup applications that delete subvolumes and wait
until they're cleaned to check for remaining space.
The other modes are for flexibility, e.g. for monitoring or
checkpoints in the queue of deleted subvolumes, again without the need
to use SEARCH_TREE.
Notes:
- waiting is interruptible, the timeout is set to 1 second and is not
configurable
- repeated calls to the ioctl see a different state, so this is
inherently racy when using e.g. the count or peek next/last
Use cases:
- a subvolume A was deleted, wait for cleaning (WAIT_FOR_ONE)
- a bunch of subvolumes were deleted, wait for all (WAIT_FOR_QUEUED or
PEEK_LAST + WAIT_FOR_ONE)
- count how many are queued (not blocking), for monitoring purposes
- report progress (PEEK_NEXT), may miss some if cleaning is quick
- own waiting in user space (PEEK_LAST until it's 0)
Signed-off-by: David Sterba <dsterba@suse.com>
Simplify tracking of the range processed by using cur_alloc_size only to
store the reserved part that may fail to the allocated extent. Remove
the ram_size as well since it is always equal to cur_alloc_size in the
context. Advance the start in normal path until extent allocation
succeeds and keep the start unchanged in the error handling path.
Passed the fstest generic/475 test for a hundred times with quota
enabled. And a modified generic/475 test by removing the sleep time
for a hundred times. About one tenth of the tests do enter the error
handling path due to fail to reserve extent.
Suggested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Haisu Wang <haisuwang@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove conditional path allocation from btrfs_read_locked_inode(). Add
an ASSERT(path) to indicate it should never be called with a NULL path.
Call btrfs_read_locked_inode() directly from btrfs_iget(). This causes
code duplication between btrfs_iget() and btrfs_iget_path(), but I
think this is justifiable as it removes the need for conditionally
allocating the path inside of btrfs_read_locked_inode(). This makes the
code easier to reason about and makes it clear who has the
responsibility of allocating and freeing the path.
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move btrfs_add_inode_to_root() so it can be called from
btrfs_read_locked_inode(), no changes were made to the function.
Move cleanup code from btrfs_iget_path() to btrfs_read_locked_inode.
This improves readability and improves a leaky abstraction. Previously
btrfs_iget_path() had to handle a positive error case as a result of a
call to btrfs_search_slot(), but it makes more sense to handle this
closer to the source of the call.
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add struct io_btrfs_cmd as a wrapper type for io_uring_cmd_to_pdu(),
rather than using a raw pointer.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an io_uring command for encoded reads, using the same interface as
the existing BTRFS_IOC_ENCODED_READ ioctl.
btrfs_uring_encoded_read() is an io_uring version of
btrfs_ioctl_encoded_read(), which validates the user input and calls
btrfs_encoded_read() to read the appropriate metadata. If we determine
that we need to read an extent from disk, we call
btrfs_encoded_read_regular_fill_pages() through
btrfs_uring_read_extent() to prepare the bio.
The existing btrfs_encoded_read_regular_fill_pages() is changed so that
if it is passed a valid uring_ctx, rather than waking up any waiting
threads it calls btrfs_uring_read_extent_endio(). This in turn copies
the read data back to userspace, and calls io_uring_cmd_done() to
complete the io_uring command.
Because we're potentially doing a non-blocking read,
btrfs_uring_read_extent() doesn't clean up after itself if it returns
-EIOCBQUEUED. Instead, it allocates a priv struct, populates the fields
there that we will need to unlock the inode and free our allocations,
and defers this to the btrfs_uring_read_finished() that gets called when
the bio completes.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change btrfs_encoded_read_regular_fill_pages() so that the priv struct
is allocated rather than stored on the stack, in preparation for adding
an asynchronous mode to the function.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change btrfs_encoded_read() so that it returns -EAGAIN rather than sleeps
if IOCB_NOWAIT is set in iocb->ki_flags. The conditions that require
sleeping are: inode lock, writeback, extent lock, ordered range.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change the behaviour of btrfs_encoded_read() so that if it needs to read
an extent from disk, it leaves the extent and inode locked and returns
-EIOCBQUEUED. The caller is then responsible for doing the I/O via
btrfs_encoded_read_regular() and unlocking the extent and inode.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
iocb->ki_pos isn't used after this function, so there's no point in
changing its value.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After the previous patch, which converted the rb-tree used to track
delayed ref heads into an xarray, the find_ref_head() function is now
used only by one caller which always passes false to the 'return_bigger'
argument. So remove the 'return_bigger' logic, simplifying the function,
and move all the function code to the single caller.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use a red black tree (rb-tree) to track the delayed ref
heads (in struct btrfs_delayed_ref_root::href_root). This however is not
very efficient when the number of delayed ref heads is large (and it's
very common to be at least in the order of thousands) since rb-trees are
binary trees. For example for 10K delayed ref heads, the tree has a depth
of 13. Besides that, inserting into the tree requires navigating through
it and pulling useless cache lines in the process since the red black tree
nodes are embedded within the delayed ref head structure - on the other
hand, by being embedded, it requires no extra memory allocations.
We can improve this by using an xarray instead which has a much higher
branching factor than a red black tree (binary balanced tree) and is more
cache friendly and behaves like a resizable array, with a much better
search and insertion complexity than a red black tree. This only has one
small disadvantage which is that insertion will sometimes require
allocating memory for the xarray - which may fail (not that often since
it uses a kmem_cache) - but on the other hand we can reduce the delayed
ref head structure size by 24 bytes (from 152 down to 128 bytes) after
removing the embedded red black tree node, meaning than we can now fit
32 delayed ref heads per 4K page instead of 26, and that gain compensates
for the occasional memory allocations needed for the xarray nodes. We
also end up using only 2 cache lines instead of 3 per delayed ref head.
Running the following fs_mark test showed some improvements:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
MOUNT_OPTIONS="-o ssd"
FILES=100000
THREADS=$(nproc --all)
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $DEV
mount $MOUNT_OPTIONS $DEV $MNT
OPTS="-S 0 -L 5 -n $FILES -s 0 -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Before this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 171845.7 12253839
16 2400000 0 230898.7 12308254
23 3600000 0 212292.9 12467768
30 4800000 0 195737.8 12627554
46 6000000 0 171055.2 12783329
After this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 173835.0 12246131
16 2400000 0 233537.8 12271746
23 3600000 0 220398.7 12307737
30 4800000 0 204483.6 12392318
40 6000000 0 182923.3 12771843
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add some comments to struct btrfs_delayed_ref_root's fields to mention
what its spinlock protects.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The delayed refs lock must be held when calling add_delayed_ref_head(),
so assert that it's being held.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The delayed refs lock must be held when calling find_first_ref_head(), so
assert that it's being held.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have 3 callers for find_ref_head() so assert at find_ref_head() that we
have the delayed refs lock held, removing the assertion from one of its
callers (btrfs_find_delayed_ref_head()).
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One of the following patches in the series will need to access fs_info at
btrfs_delete_ref_head(), so pass a fs_info argument to it.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One of the following patches in the series will need to access fs_info in
the function find_ref_head(), so pass a fs_info argument to it as well as
to the functions btrfs_select_ref_head() and btrfs_find_delayed_ref_head()
which call find_ref_head().
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The unselect_delayed_ref_head() at extent-tree.c doesn't really belong in
that file as it's a delayed refs specific detail and therefore should be
at delayed-ref.c. Further its inverse, btrfs_select_ref_head(), is at
delayed-ref.c, so it only makes sense to have it there too.
So move unselect_delayed_ref_head() into delayed-ref.c and rename it to
btrfs_unselect_ref_head() so that its name closely matches its inverse
(btrfs_select_ref_head()).
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of doing it in two steps outside of delayed-ref.c, leaking low
level details such as locking, move the logic entirely to delayed-ref.c
under btrfs_select_ref_head(), reducing code and making things simpler
for the caller.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function only returns 0, meaning it was able to lock the delayed ref
head, or -EAGAIN in case it wasn't able to lock it. So simplify this and
use a boolean return type instead, returning true if it was able to lock
and false otherwise.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The atomic counter 'num_entries' is not used anymore, we increment it
and decrement it but then we don't ever read it to use for any logic.
Its last use was removed with commit 61a56a992f ("btrfs: delayed refs
pre-flushing should only run the heads we have"). So remove it.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of open coding it, use the find_first_ref_head() helper at
btrfs_destroy_delayed_refs(). This avoids duplicating the logic,
specially with the upcoming changes in subsequent patches.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When destroying delayed refs during a transaction abort, we have open
coded the removal of a delayed ref, which is also done by the static
helper function drop_delayed_ref(). So remove that duplicated code and
use drop_delayed_ref() instead.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info parameter is redundant because it can be extracted from the
transaction given as another parameter. So remove it and use the fs_info
accessible from the transaction.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info parameter is redundant because it can be extracted from the
transaction given as another parameter. So remove it and use the fs_info
accessible from the transaction.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's better suited at delayed-ref.c since it's about delayed refs and
contains logic to iterate over them (using the red black tree, doing all
the locking, freeing, etc), so move it from disk-io.c, which is pretty
big, into delayed-ref.c, hiding implementation details of how delayed
refs are tracked and managed. This also facilitates the next patches in
the series.
This change moves the code between files but also does the following
simple cleanups:
1) Rename the 'cache' variable to 'bg', since it's a block group
(the 'cache' logic comes from old days where the block group
structure was named 'btrfs_block_group_cache');
2) Move the 'ref' variable declaration to the scope of the inner
while loop, since it's not used outside that loop.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_destroy_delayed_refs() it's unexpected to not find the block
group to which a delayed reference's extent belongs to, so we have this
BUG_ON(), not just because it's highly unexpected but also because we
don't know what to do there.
Since we are in the transaction abort path, there's nothing we can do
other than proceed and cleanup all used resources we can. So remove
the BUG_ON() and deal with a missing block group by logging an error
message and continuing to cleanup all we can related to the current
delayed ref head and moving to other delayed refs.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When inserting extent backref, in order to check whether refs other than
inline refs are used, we always use path keep locks for tree search, which
will increase the lock contention of extent tree.
We do not need the parent node every time to determine whether normal
refs are used. It is only needed when the extent item is the last item
in a leaf.
Therefore, we change it to first use keep_locks=0 for search. If the
extent item happens to be the last item in the leaf, we then change to
keep_locks=1 for the second search to reduce lock contention.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Implement self-tests for partial deletion of RAID stripe-tree entries.
These two new tests cover both the deletion of the front of a RAID
stripe-tree stripe extent as well as truncation of an item to make it
smaller.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In our CI system, the RAID stripe tree configuration sometimes fails with
the following ASSERT():
assertion failed: found_start >= start && found_end <= end, in fs/btrfs/raid-stripe-tree.c:64
This ASSERT()ion triggers, because for the initial design of RAID
stripe-tree, I had the "one ordered-extent equals one bio" rule of zoned
btrfs in mind.
But for a RAID stripe-tree based system, that is not hosted on a zoned
storage device, but on a regular device this rule doesn't apply.
So in case the range we want to delete starts in the middle of the
previous item, grab the item and "truncate" it's length. That is, clone
the item, subtract the deleted portion from the key's offset, delete the
old item and insert the new one.
In case the range to delete ends in the middle of an item, we have to
adjust both the item's key as well as the stripe extents and then
re-insert the modified clone into the tree after deleting the old stripe
extent.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When fgp_flags and gfp_flags are zero, use filemap_get_folio(A, B)
instead of __filemap_get_folio(A, B, 0, 0)—no need for the extra
arguments 0, 0.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The buffered write path is still heavily utilizing the page interface.
Since we have converted it to do a page-by-page copying, it's much easier
to convert all involved functions to folio interface, this involves:
- btrfs_copy_from_user()
- btrfs_drop_folio()
- prepare_uptodate_page()
- prepare_one_page()
- lock_and_cleanup_extent_if_need()
- btrfs_dirty_page()
All function are changed to accept a folio parameter, and if the word
"page" is in the function name, change that to "folio" too.
The function btrfs_dirty_page() is exported for v1 space cache, convert
v1 cache call site to convert its page to folio for the new interface.
And there is a small enhancement for prepare_one_folio(), instead of
manually waiting for the page writeback, let __filemap_get_folio() to
handle that by using FGP_WRITEBEGIN, which implies
(FGP_LOCK | FGP_WRITE | FGP_CREAT | FGP_STABLE).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the btrfs_buffered_write() is preparing multiple page a time,
allowing a better performance.
But the current trend is to support larger folio as an optimization,
instead of implementing own multi-page optimization.
This is inspired by generic_perform_write(), which is copying one folio
a time.
Such change will prepare us to migrate to implement the write_begin()
and write_end() callbacks, and make every involved function a little
easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_do_encoded_write() was converted to use folios in 400b172b8c,
but we're still allocating based on sizeof(struct page *) rather than
sizeof(struct folio *). There's no functional change.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove hard-coded strings by using the str_yes_no() and str_no_yes()
helper functions.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since there is no user of reader locks, rename the writer locks into a
more generic name, by removing the "_writer" part from the name.
And also rename btrfs_subpage::writer into btrfs_subpage::locked.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit d7172f52e9 ("btrfs: use per-buffer locking for
extent_buffer reading"), metadata read no longer relies on the subpage
reader locking.
This means we do not need to maintain a different metadata/data split
for locking, so we can convert the existing reader lock users by:
- add_ra_bio_pages()
Convert to btrfs_folio_set_writer_lock()
- end_folio_read()
Convert to btrfs_folio_end_writer_lock()
- begin_folio_read()
Convert to btrfs_folio_set_writer_lock()
- folio_range_has_eb()
Remove the subpage->readers checks, since it is always 0.
- Remove btrfs_subpage_start_reader() and btrfs_subpage_end_reader()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is not really suitable to lock a folio, as it lacks the
proper mapping checks, thus the locked folio may not even belong to
btrfs.
And due to the above reason, the last user inside lock_delalloc_folios()
is already removed, and we can remove this function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If you follow the seed/sprout wiki, it suggests the following workflow:
btrfstune -S 1 seed_dev
mount seed_dev mnt
btrfs device add sprout_dev
mount -o remount,rw mnt
The first mount mounts the FS readonly, which results in not setting
BTRFS_FS_OPEN, and setting the readonly bit on the sb. The device add
somewhat surprisingly clears the readonly bit on the sb (though the
mount is still practically readonly, from the users perspective...).
Finally, the remount checks the readonly bit on the sb against the flag
and sees no change, so it does not run the code intended to run on
ro->rw transitions, leaving BTRFS_FS_OPEN unset.
As a result, when the cleaner_kthread runs, it sees no BTRFS_FS_OPEN and
does no work. This results in leaking deleted snapshots until we run out
of space.
I propose fixing it at the first departure from what feels reasonable:
when we clear the readonly bit on the sb during device add.
A new fstest I have written reproduces the bug and confirms the fix.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
It's redundant to have the 'gen' variable since we already have the same
value in the local btrfs_tree_parent_check structure. So remove it and
instead use the structure's field.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's pointless to initialize the has_first_key field of the stack local
btrfs_tree_parent_check structure at btrfs_tree_parent_check() and at
btrfs_qgroup_trace_subtree() since all fields not explicitly initialized
are zeroed out. In the case of the first function it's a bit odd because
we are assigning 0 and the field is of type bool, however not incorrect
since a 0 is converted to false.
Just remove the explicit initializations due to their redundancy.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only caller of btrfs_verify_level_key() is read_block_for_search() and
it's passing 3 arguments to it that can be extracted from its on stack
variable of type struct btrfs_tree_parent_check.
So change btrfs_verify_level_key() to accept an argument of type
struct btrfs_tree_parent_check instead of level, first key and parent
transid arguments.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The level parameter passed to read_block_for_search() always matches the
level of the extent buffer passed in the "eb_ret" parameter, which we are
also extracting into the "parent_level" local variable.
So remove the level parameter and instead use the "parent_level" variable
which in fact has a better name (it's the level of the parent node from
which we are reading a child node/leaf).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the extent map shrinker can only be run by a single task and runs
asynchronously as a work queue job, enable it as it can no longer cause
stalls on tasks allocating memory and entering the extent map shrinker
through the fs shrinker (implemented by btrfs_free_cached_objects()).
This is crucial to prevent exhaustion of memory due to unbounded extent
map creation, primarily with direct IO but also for buffered IO on files
with holes. This problem, for the direct IO case, was first reported in
the Link tag below. That report was added to a Link tag of the first patch
that introduced the extent map shrinker, commit 956a17d9d0 ("btrfs: add
a shrinker for extent maps"), however the Link tag disappeared somehow
from the committed patch (but was included in the submitted patch to the
mailing list), so adding it below for future reference.
Link: https://lore.kernel.org/linux-btrfs/13f94633dcf04d29aaf1f0a43d42c55e@amazon.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The names for the members of struct btrfs_fs_info related to the extent
map shrinker are a bit too long, so rename them to be shorter by replacing
the "extent_map_" prefix with the "em_" prefix.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the extent map shrinker can only be run by a single task (as a
work queue item) there is no need to keep the progress of the shrinker
protected by a spinlock and passing the progress to trace events as
parameters. So remove the lock and simplify the arguments for the trace
events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the extent map shrinker is run synchronously for kswapd tasks
that end up calling the fs shrinker (fs/super.c:super_cache_scan()).
This has some disadvantages and for some heavy workloads with memory
pressure it can cause some delays and stalls that make a machine
unresponsive for some periods. This happens because:
1) We can have several kswapd tasks on machines with multiple NUMA zones,
and running the extent map shrinker concurrently can cause high
contention on some spin locks, namely the spin locks that protect
the radix tree that tracks roots, the per root xarray that tracks
open inodes and the list of delayed iputs. This not only delays the
shrinker but also causes high CPU consumption and makes the task
running the shrinker monopolize a core, resulting in the symptoms
of an unresponsive system. This was noted in previous commits such as
commit ae1e766f62 ("btrfs: only run the extent map shrinker from
kswapd tasks");
2) The extent map shrinker's iteration over inodes can often be slow, even
after changing the data structure that tracks open inodes for a root
from a red black tree (up to kernel 6.10) to an xarray (kernel 6.10+).
The transition to the xarray while it made things a bit faster, it's
still somewhat slow - for example in a test scenario with 10000 inodes
that have no extent maps loaded, the extent map shrinker took between
5ms to 8ms, using a release, non-debug kernel. Iterating over the
extent maps of an inode can also be slow if have an inode with many
thousands of extent maps, since we use a red black tree to track and
search extent maps. So having the extent map shrinker run synchronously
adds extra delay for other things a kswapd task does.
So make the extent map shrinker run asynchronously as a job for the
system unbounded workqueue, just like what we do for data and metadata
space reclaim jobs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the common code to remove an extent map from its inode's tree into a
helper function and use it, reducing duplicated code.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When crawling btree, if an eb cache miss occurs, we change to use the eb
read lock and release all previous locks (including the parent lock) to
reduce lock contention.
If an eb cache miss occurs in a leaf and needs to execute IO, before this
change we released locks only from level 2 and up and we read a leaf's
content from disk while holding a lock on its parent (level 1), causing
the unnecessary lock contention on the parent, after this change we
release locks from level 1 and up, but we lock level 0, and read leaf's
content from disk.
Because we have prepared the check parameters and the read lock of eb we
hold, we can ensure that no race will occur during the check and cause
unexpected errors.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compression heuristic pass does not need a level, so we can drop the
parameter.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cascaded removal of fs_info that is not needed in several functions.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function got split in commit 6ab6ebb760 ("btrfs: split
alloc_log_tree()") and since then transaction parameter has been unused.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only caller passes NULL, we can drop the parameter. This is since
the new mount option parser done in 3bb17a25bc ("btrfs: add get_tree
callback for new mount API").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the new mount option parser in commit ad21f15b0f ("btrfs:
switch to the new mount API") we don't pass the options like that
anymore.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter was added in 8ff8466d29 ("btrfs: support subpage for
extent buffer page release") for page but hasn't been used since, so we
can drop it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The mask parameter used for allocations got unified to GFP_NOFS and
removed from relevant functions in 1d12680044 ("btrfs: drop gfp from
parameter extent state helpers").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter duplicates what can be effectively obtained from
wc->refs[level - 1] and this is what's actually used inside. Added in
commit 2b73c7e761 ("btrfs: unify logic to decide if we need to walk
down into a node during snapshot delete").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter 'from' has never been used since commit b8d8e1fd57
("btrfs: introduce btrfs_write_check()"), this is for buffered write.
Direct io write needs it so it was probably an interface thing, but we
can drop it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The file_offset parameter used to be passed to encoded read struct but
was removed in commit b665affe93 ("btrfs: remove unused members from
struct btrfs_encoded_read_private").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need offset for inline extents, they always start from 0.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need the inode pointer to read inline extent, it's all
accessible from the path pointer.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need the user passed parameter, rescan is a filesystem
operation so fs_info is sufficient.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The LZO compression has only one level, we don't need to pass the
parameter.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The caller replace_path() runs under transaction but we don't need it in
btrfs_qgroup_add_swapped_blocks().
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need fs_info here, everything is reachable from qgroup.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter map used to be passed to scrub_extent() until
e02ee89baa ("btrfs: scrub: switch scrub_simple_mirror() to
scrub_stripe infrastructure"), where the scrub implementation was
completely reworked.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter is unused and we can reach sctx from scrub stripe if
needed.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
None of the ref iteration callbacks needs the index parameter (this is
for the directory item iteration), so we can drop it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
None of the ref iteration callbacks needs the num parameter (this is for
the directory item iteration), so we can drop it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter is unused and we can get it from space info if needed.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter is not used, we can also reach it from the space info if
needed in the future.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The path parameter was used for our own locking, that got converted to
rwsem eventually. Last usage in ac5887c8e0 ("btrfs: locking: remove
all the blocking helpers").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make sure we got the right timer struct for the zstd workspace reclaim
work.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_set_range_writeback() was originally a callback for
metadata and data, to mark a range with writeback flag.
Then it was converted into a common function call for both metadata and
data.
From the very beginning, the function had been only called on a full page,
later converted to handle range inside a page.
But it never needed to handle multiple pages, and since commit
8189197425 ("btrfs: refactor __extent_writepage_io() to do
sector-by-sector submission") the function was only called on a
sector-by-sector basis.
This makes the function unnecessary, and can be converted to a simple
btrfs_folio_set_writeback() call instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When trying to flush qgroups in order to release space we run delayed
iputs in order to release space from recently deleted files (their link
counted reached zero), and then we start delalloc and wait for any
existing ordered extents to complete.
However there's a time window here where we end up not doing the final
iput on a deleted file which could release necessary space:
1) An unlink operation starts;
2) During the unlink, or right before it completes, delalloc is flushed
and an ordered extent is created;
3) When the ordered extent is created, the inode's ref count is
incremented (with igrab() at alloc_ordered_extent());
4) When the unlink finishes it doesn't drop the last reference on the
inode and so it doesn't trigger inode eviction to delete all of
the inode's items in its root and drop all references on its data
extents;
5) Another task enters try_flush_qgroup() to try to release space,
it runs all delayed iputs, but there's no delayed iput yet for that
deleted file because the ordered extent hasn't completed yet;
6) Then at try_flush_qgroup() we wait for the ordered extent to complete
and that results in adding a delayed iput at btrfs_put_ordered_extent()
when called from btrfs_finish_one_ordered();
7) Adding the delayed iput results in waking the cleaner kthread if it's
not running already. However it may take some time for it to be
scheduled, or it may be running but busy running auto defrag, dropping
deleted snapshots or doing other work, so by the time we return from
try_flush_qgroup() the space for deleted file isn't released.
Improve on this by running delayed iputs only after flushing delalloc
and waiting for ordered extent completion.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Performing the initial extent sector read on a RAID stripe-tree backed
filesystem with pre-allocated extents will cause the RAID stripe-tree
lookup code to return ENODATA, as pre-allocated extents do not have any
on-disk bytes and thus no RAID stripe-tree entries.
But the current scrub read code marks these extents as errors, because
the lookup fails.
If btrfs_map_block() returns -ENODATA, it means that the call to
btrfs_get_raid_extent_offset() returned -ENODATA, because there is no
entry for the corresponding range in the RAID stripe-tree. But as this
range is in the extent tree it means we've hit a pre-allocated extent. In
this case, don't mark the sector in the stripe's error bitmaps as faulty
and carry on to the next.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In case a lookup in the RAID stripe-tree fails, return ENODATA instead of
ENOENT to better distinguish stripe-tree lookups from other code paths
where we return ENOENT.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we BUG_ON() in btrfs_finish_one_ordered() if we are finishing
an ordered extent that is flagged as NOCOW, but it's checksum list is
not empty.
This is clearly a logic error which we can recover from by aborting the
transaction.
For developer builds which enable CONFIG_BTRFS_ASSERT, also ASSERT()
that the list is empty.
Suggested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently inside prepare_pages(), we handle the leading and tailing page
differently, and skip the middle pages (if any). This is to avoid
reading pages which are fully covered by the dirty range.
Refactor the code by moving all checks (alignment check, range check,
force read check) into prepare_uptodate_page().
So that prepare_pages() only needs to iterate all the pages
unconditionally.
And since we're here, also update prepare_uptodate_page() to use
folio API other than the old page API.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside btrfs_buffered_write(), we have a local variable @dirty_pages,
recording the number of pages we dirtied in the current iteration.
However we do not really need that variable, since it can be calculated
from @pos and @copied.
In fact there is already a problem inside the short copy path, where we
use @dirty_pages to calculate the range we need to release.
But that usage assumes sectorsize == PAGE_SIZE, which is no longer true.
Instead of keeping @dirty_pages and cause incorrect usage, just
calculate the number of dirtied pages inside btrfs_dirty_pages().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_try_tree_write_lock() has been unused since commit
50b21d7a06 ("btrfs: submit a writeback bio per extent_buffer").
Remove it as we don't need it anymore.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_is_parity_mirror() has been unused since commit 4886ff7b50
("btrfs: introduce a new helper to submit write bio for repair").
Remove it as the code was refactored and we don't need the helper
anymore.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_free_squota_rsv() was added in commit
e85a0adacf ("btrfs: ensure releasing squota reserve on head refs")
but has remained unused since then.
Remove it as we don't seem to need it and was probably a leftover.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add first stash of very basic self tests for the RAID stripe-tree.
More test cases will follow exercising the tree.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This macro is no longer used after the "btrfs: Cleaned up folio->page
conversion" series patch [1] was applied, so remove it.
[1]: https://patchwork.kernel.org/project/linux-btrfs/cover/20240828182908.3735344-1-lizetao1@huawei.com/
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The variable stop_loop was originally introduced in commit 625f1c8dc6
("Btrfs: improve the loop of scrub_stripe"). It was initialized to 0 in
commit 3b080b2564 ("Btrfs: scrub raid56 stripes in the right way").
However, in a later commit 18d30ab961 ("btrfs: scrub: use
scrub_simple_mirror() to handle RAID56 data stripe scrub"), the code
that modified stop_loop was removed, making the variable redundant.
Currently, stop_loop is only initialized with 0 and is never used or
modified within the scrub_stripe() function. As a result, this patch
removes the stop_loop variable to clean up the code and eliminate
unnecessary redundancy.
This change has no impact on functionality, as stop_loop was never
utilized in any meaningful way in the final version of the code.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The qgroup record was allocated with kzalloc(), so it's pointless to set
its old_roots member to NULL. Remove the assignment.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of dereferencing the delayed refs from the transaction multiple
times, store it early in the local variable and then always use the
variable.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to hold the delayed refs spinlock when calling
btrfs_qgroup_trace_extent_nolock() from btrfs_qgroup_trace_extent(), since
it doesn't change anything in delayed refs and it only changes the xarray
used to track qgroup extent records, which is protected by the xarray's
lock.
Holding the lock is only adding unnecessary lock contention with other
tasks that actually need to take the lock to add/remove/change delayed
references. So remove the locking.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of extracting fs_info from the transaction multiples times, store
it in a local variable and use it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we track qgroup extent records in a xarray we don't need to have
a "bytenr" field in struct btrfs_qgroup_extent_record, since we can get
it from the index of the record in the xarray.
So remove the field and grab the bytenr from either the index key or any
other place where it's available (delayed refs). This reduces the size of
struct btrfs_qgroup_extent_record from 40 bytes down to 32 bytes, meaning
that we now can store 128 instances of this structure instead of 102 per
4K page.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove the duplicated transaction joining, block reserve setting and raid
extent inserting in btrfs_finish_ordered_extent().
While at it, also abort the transaction in case inserting a RAID
stripe-tree entry fails.
Suggested-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
Currently btrfs accepts any file path for its device, resulting some
weird situation:
# ./mount_by_fd /dev/test/scratch1 /mnt/btrfs/
The program has the following source code:
#include <fcntl.h>
#include <stdio.h>
#include <sys/mount.h>
int main(int argc, char *argv[]) {
int fd = open(argv[1], O_RDWR);
char path[256];
snprintf(path, sizeof(path), "/proc/self/fd/%d", fd);
return mount(path, argv[2], "btrfs", 0, NULL);
}
Then we can have the following weird device path:
BTRFS: device fsid 2378be81-fe12-46d2-a9e8-68cf08dd98d5 devid 1 transid 7 /proc/self/fd/3 (253:2) scanned by mount_by_fd (18440)
Normally it's not a big deal, and later udev can trigger a device path
rename. But if udev didn't trigger, the device path "/proc/self/fd/3"
will show up in mtab.
[CAUSE]
For filename "/proc/self/fd/3", it means the opened file descriptor 3.
In above case, it's exactly the device we want to open, aka points to
"/dev/test/scratch1" which is another symlink pointing to "/dev/dm-2".
Inside kernel we solve the mount source using LOOKUP_FOLLOW, which
follows the symbolic link and grab the proper block device.
But inside btrfs we also save the filename into btrfs_device::name, and
utilize that member to report our mount source, which leads to the above
situation.
[FIX]
Instead of unconditionally trust the path, check if the original file
(not following the symbolic link) is inside "/dev/", if not, then
manually lookup the path to its final destination, and use that as our
device path.
This allows us to still use symbolic links, like
"/dev/mapper/test-scratch" from LVM2, which is required for fstests runs
with LVM2 setup.
And for really weird names, like the above case, we solve it to
"/dev/dm-2" instead.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1230641
Reported-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
It is very common for udev to trigger device scan, and every time a
mounted btrfs device got re-scan from different soft links, we will get
some of unnecessary device path updates, this is especially common
for LVM based storage:
# lvs
scratch1 test -wi-ao---- 10.00g
scratch2 test -wi-a----- 10.00g
scratch3 test -wi-a----- 10.00g
scratch4 test -wi-a----- 10.00g
scratch5 test -wi-a----- 10.00g
test test -wi-a----- 10.00g
# mkfs.btrfs -f /dev/test/scratch1
# mount /dev/test/scratch1 /mnt/btrfs
# dmesg -c
[ 205.705234] BTRFS: device fsid 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9 devid 1 transid 6 /dev/mapper/test-scratch1 (253:4) scanned by mount (1154)
[ 205.710864] BTRFS info (device dm-4): first mount of filesystem 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9
[ 205.711923] BTRFS info (device dm-4): using crc32c (crc32c-intel) checksum algorithm
[ 205.713856] BTRFS info (device dm-4): using free-space-tree
[ 205.722324] BTRFS info (device dm-4): checking UUID tree
So far so good, but even if we just touched any soft link of
"dm-4", we will get quite some unnecessary device path updates.
# touch /dev/mapper/test-scratch1
# dmesg -c
[ 469.295796] BTRFS info: devid 1 device path /dev/mapper/test-scratch1 changed to /dev/dm-4 scanned by (udev-worker) (1221)
[ 469.300494] BTRFS info: devid 1 device path /dev/dm-4 changed to /dev/mapper/test-scratch1 scanned by (udev-worker) (1221)
Such device path rename is unnecessary and can lead to random path
change due to the udev race.
[CAUSE]
Inside device_list_add(), we are using a very primitive way checking if
the device has changed, strcmp().
Which can never handle links well, no matter if it's hard or soft links.
So every different link of the same device will be treated as a different
device, causing the unnecessary device path update.
[FIX]
Introduce a helper, is_same_device(), and use path_equal() to properly
detect the same block device.
So that the different soft links won't trigger the rename race.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1230641
Reported-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously for btrfs with sector size smaller than page size (subpage),
we only allow compression if the range is fully page aligned.
This is to work around the asynchronous submission of compressed range,
which delayed the page unlock and writeback into a workqueue,
furthermore asynchronous submission can lock multiple sector range
across page boundary.
Such asynchronous submission makes it very hard to co-operate with other
regular writes.
With the recent changes to the subpage folio unlock path, now
asynchronous submission of compressed pages can co-operate with regular
submission, so enable sector perfect compression if it's an experimental
build.
The ETA for moving this feature out of experimental is 6.15, and I hope
all remaining corner cases can be exposed before that.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we only mark sectors as locked if there is a *NEW* delalloc
range for it.
But NEW delalloc range is not the same as dirty sectors we want to
submit, e.g:
0 32K 64K 96K 128K
| |////////||///////| |////|
120K
For above 64K page size case, writepage_delalloc() for page 0 will find
and lock the delalloc range [32K, 96K), which is beyond the page
boundary.
Then when writepage_delalloc() is called for the page 64K, since [64K,
96K) is already locked, only [120K, 128K) will be locked.
This means, although range [64K, 96K) is dirty and will be submitted
later by extent_writepage_io(), it will not be marked as locked.
This is fine for now, as we call btrfs_folio_end_writer_lock_bitmap() to
free every non-compressed sector, and compression is only allowed for
full page range.
But this is not safe for future sector perfect compression support, as
this can lead to double folio unlock:
Thread A | Thread B
---------------------------------------+--------------------------------
| submit_one_async_extent()
| |- extent_clear_unlock_delalloc()
extent_writepage() | |- btrfs_folio_end_writer_lock()
|- btrfs_folio_end_writer_lock_bitmap()| |- btrfs_subpage_end_and_test_writer()
| | | |- atomic_sub_and_test()
| | | /* Now the atomic value is 0 */
|- if (atomic_read() == 0) | |
|- folio_unlock() | |- folio_unlock()
The root cause is the above range [64K, 96K) is dirtied and should also
be locked but it isn't.
So to make everything more consistent and prepare for the incoming
sector perfect compression, mark all dirty sectors as locked.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently for subpage (sector size < page size) cases, we reuse subpage
locked bitmap to find out all delalloc ranges we have locked, and run
all those found ranges.
However such reuse is not perfect, e.g.:
0 32K 64K 96K 128K
| |////////||///////| |////|
120K
For above range, writepage_delalloc() for page 0 will handle the range
[32K, 96k), note delalloc range can be beyond the page boundary.
But writepage_delalloc() for page 64K will only handle range [120K,
128K), as the previous run on page 0 has already handled range [64K,
96K).
Meanwhile for the writeback we should expect range [64K, 96K) to also be
locked, this leads to the mismatch from locked bitmap and delalloc
range.
This is not causing problems yet, but it's still an inconsistent
behavior.
So instead of relying on the subpage locked bitmap, move the delalloc
range search using local @delalloc_bitmap, so that we can remove the
existing btrfs_folio_find_writer_locked().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function extent_writepage_io() will submit the dirty sectors inside
the page for the write.
But recently to co-operate with the incoming subpage compression
enhancement, a new bitmap is introduced to
btrfs_bio_ctrl::submit_bitmap, to only avoid a subset of the dirty
range.
This is because we can have the following cases with 64K page size:
0 16K 32K 48K 64K
| |/////////| |/|
52K
For range [16K, 32K), we queue the dirty range for compression, which is
ran in a delayed workqueue.
Then for range [48K, 52K), we go through the regular submission path.
In that case, our btrfs_bio_ctrl::submit_bitmap will exclude the range
[16K, 32K).
The dirty flags for the range [16K, 32K) is only cleared when the
compression is done, by the extent_clear_unlock_delalloc() call inside
submit_one_async_extent().
This patch fix the false alert by removing the
btrfs_folio_assert_not_dirty() check, since it's no longer correct for
subpage compression cases.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For btrfs with sector size < page size (e.g. 4K sector size, 64K page
size), and enable the sector perfect compression support, then the
following dirty range can lead to problems:
0 32K 64K 96K 128K
| |///////||//////| |/|
124K
In above case, if we start writeback for that inode, the last dirty
range [124K, 128K) will not be submitted and cause reserved space
leakage:
- Start writeback for page 0
We find the range [32K, 96K) is suitable for compression, and queue it
into a workqueue to do the delayed compression and submission.
- Compression happens for range [32K, 96K)
Function extent_range_clear_dirty_for_io() is called, however it is
only doing full page handling, not considering any the extra bitmaps
for subpage cases.
That function will clear page dirty for both page 0 and page 64K.
- Writeback for the inode is done
Because page 64K has its dirty flag cleared, it will not be considered
as a writeback target.
This means the range [124K, 128K) will not be submitted, and reserved
space for it will be leaked.
Fix this problem by using the subpage helper to clear the dirty flag.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
If sector perfect compression is enabled for sector size < page size
case, the following case can lead dirty ranges not being written back:
0 32K 64K 96K 128K
| |///////||//////| |/|
124K
In above example, the page size is 64K, and we need to write back above
two pages.
- Submit for page 0 (main thread)
We found delalloc range [32K, 96K), which can be compressed.
So we queue an async range for [32K, 96K).
This means, the page unlock/clearing dirty/setting writeback will
all happen in a workqueue context.
- The compression is done, and compressed range is submitted (workqueue)
Since the compression is done in asynchronously, the compression can
be done before the main thread to submit for page 64K.
Now the whole range [32K, 96K), involving two pages, will be marked
writeback.
- Submit for page 64K (main thread)
extent_write_cache_pages() got its wbc->sync_mode is WB_SYNC_NONE,
so it skips the writeback wait.
And unlock the page and exit. This means the dirty range [124K, 128K)
will never be submitted, until next writeback happens for page 64K.
This will never happen for previous kernels because:
- For sector size == page size case
Since one page is one sector, if a page is marked writeback it will
not have dirty flags.
So this corner case will never hit.
- For sector size < page size case
We never do subpage compression, a range can only be submitted for
compression if the range is fully page aligned.
This change makes the subpage behavior mostly the same as non-subpage
cases.
[ENHANCEMENT]
Instead of relying WB_SYNC_NONE check only, if it's a subpage case, then
always wait for writeback flags.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are already two bugs (one in zlib, one in zstd) that involved
compression path is not handling sector size < page size cases well.
So it makes more sense to make sure that btrfs_compress_folios() returns
Since we already have two bugs (one in zlib, one in zstd) in the
compression path resulting the @total_in be to larger than the
to-be-compressed range length, there is enough reason to add an ASSERT()
to make sure the total read-in length doesn't exceed the input length.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside zstd_compress_folios(), after exhausted one input page, we need
to switch to the next page as input.
However when counting the total input bytes (@tot_in), we always increase
it by PAGE_SIZE.
For the following case, it can cause incorrect value:
0 32K 64K 96K
| |///////////||///////////|
After compressing range [32K, 64K), we switch to the next page, and
increasing @tot_in by 64K, while we only read 32K.
This will cause the @total_in to return a value larger than the input
length.
Fix it by only increase @tot_in by the input size.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside zlib_compress_folios(), each time we switch the input page cache,
the @start is increased by PAGE_SIZE.
But for the incoming compression support for sector size < page size
(previously we support compression only when the range is fully page
aligned), this is not going to handle the following case:
0 32K 64K 96K
| |///////////||///////////|
@start has the initial value 32K, indicating the start filepos of the
to-be-compressed range.
And when grabbing the first page as input, we always call "start +=
PAGE_SIZE;".
But since @start is starting at 32K, it will be increased by 64K,
resulting it to be 96K for the next range, causing incorrect input range
and corruption for the future subpage compression.
Fix it by only increase @start by the input size.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently CONFIG_BTRFS_EXPERIMENTAL is not only for the extra debugging
output, but also for experimental features.
This is not ideal to distinguish planned but not yet stable features
from those purely designed for debugging.
This patch splits the following features into CONFIG_BTRFS_EXPERIMENTAL:
- Extent map shrinker
This seems to be the first one to exit experimental.
- Extent tree v2
This seems to be the last one to graduate from experimental.
- Raid stripe tree
- Csum offload mode
- Send protocol v3
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
According to the description, CONFIG_BTRFS_DEBUG is only for extra
debug info, meanwhile sanity checks should be managed by
CONFIG_BTRFS_ASSERT.
There is no need to check both to enable assert_rbio().
Just remove the check for CONFIG_BTRFS_DEBUG.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=TQzP
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more one-liners that fix some user visible problems:
- use correct range when clearing qgroup reservations after COW
- properly reset freed delayed ref list head
- fix ro/rw subvolume mounts to be backward compatible with old and
new mount API"
* tag 'for-6.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix the length of reserved qgroup to free
btrfs: reinitialize delayed ref list after deleting it from the list
btrfs: fix per-subvolume RO/RW flags with new mount API
Code to support CXL Dynamic Capacity devices will have extent ranges
which need to be compared for intersection not a subset as is being
checked in range_contains().
range_overlaps() is defined in btrfs with a different meaning from what
is required in the standard range code. Dan Williams pointed this out
in [1]. Adjust the btrfs call according to his suggestion there.
Then add a generic range_overlaps().
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: linux-btrfs@vger.kernel.org
Link: https://lore.kernel.org/all/65949f79ef908_8dc68294f2@dwillia2-xfh.jf.intel.com.notmuch/ [1]
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20241107-dcd-type2-upstream-v7-1-56a84e66bc36@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The dealloc flag may be cleared and the extent won't reach the disk in
cow_file_range when errors path. The reserved qgroup space is freed in
commit 30479f31d4 ("btrfs: fix qgroup reserve leaks in
cow_file_range"). However, the length of untouched region to free needs
to be adjusted with the correct remaining region size.
Fixes: 30479f31d4 ("btrfs: fix qgroup reserve leaks in cow_file_range")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Haisu Wang <haisuwang@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At insert_delayed_ref() if we need to update the action of an existing
ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's
ref_add_list using list_del(), which leaves the ref's add_list member
not reinitialized, as list_del() sets the next and prev members of the
list to LIST_POISON1 and LIST_POISON2, respectively.
If later we end up calling drop_delayed_ref() against the ref, which can
happen during merging or when destroying delayed refs due to a transaction
abort, we can trigger a crash since at drop_delayed_ref() we call
list_empty() against the ref's add_list, which returns false since
the list was not reinitialized after the list_del() and as a consequence
we call list_del() again at drop_delayed_ref(). This results in an
invalid list access since the next and prev members are set to poison
pointers, resulting in a splat if CONFIG_LIST_HARDENED and
CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences
otherwise.
So fix this by deleting from the list with list_del_init() instead.
Fixes: 1d57ee9416 ("btrfs: improve delayed refs iterations")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With util-linux 2.40.2, the 'mount' utility is already utilizing the new
mount API. e.g:
# strace mount -o subvol=subv1,ro /dev/test/scratch1 /mnt/test/
...
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/mapper/test-scratch1", 0) = 0
fsconfig(3, FSCONFIG_SET_STRING, "subvol", "subv1", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = 0
fsmount(3, FSMOUNT_CLOEXEC, 0) = 4
mount_setattr(4, "", AT_EMPTY_PATH, {attr_set=MOUNT_ATTR_RDONLY, attr_clr=0, propagation=0 /* MS_??? */, userns_fd=0}, 32) = 0
move_mount(4, "", AT_FDCWD, "/mnt/test", MOVE_MOUNT_F_EMPTY_PATH) = 0
But this leads to a new problem, that per-subvolume RO/RW mount no
longer works, if the initial mount is RO:
# mount -o subvol=subv1,ro /dev/test/scratch1 /mnt/test
# mount -o rw,subvol=subv2 /dev/test/scratch1 /mnt/scratch
# mount | grep mnt
/dev/mapper/test-scratch1 on /mnt/test type btrfs (ro,relatime,discard=async,space_cache=v2,subvolid=256,subvol=/subv1)
/dev/mapper/test-scratch1 on /mnt/scratch type btrfs (ro,relatime,discard=async,space_cache=v2,subvolid=257,subvol=/subv2)
# touch /mnt/scratch/foobar
touch: cannot touch '/mnt/scratch/foobar': Read-only file system
This is a common use cases on distros.
[CAUSE]
We have a workaround for remount to handle the RO->RW change, but if the
mount is using the new mount API, we do not do that, and rely on the
mount tool NOT to set the ro flag.
But that's not how the mount tool is doing for the new API:
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/mapper/test-scratch1", 0) = 0
fsconfig(3, FSCONFIG_SET_STRING, "subvol", "subv1", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0 <<<< Setting RO flag for super block
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = 0
fsmount(3, FSMOUNT_CLOEXEC, 0) = 4
mount_setattr(4, "", AT_EMPTY_PATH, {attr_set=MOUNT_ATTR_RDONLY, attr_clr=0, propagation=0 /* MS_??? */, userns_fd=0}, 32) = 0
move_mount(4, "", AT_FDCWD, "/mnt/test", MOVE_MOUNT_F_EMPTY_PATH) = 0
This means we will set the super block RO at the first mount.
Later RW mount will not try to reconfigure the fs to RW because the
mount tool is already using the new API.
This totally breaks the per-subvolume RO/RW mount behavior.
[FIX]
Do not skip the reconfiguration even if using the new API. The old
comments are just expecting any mount tool to properly skip the RO flag
set even if we specify "ro", which is not the reality.
Update the comments regarding the backward compatibility on the kernel
level so it works with old and new mount utilities.
CC: stable@vger.kernel.org # 6.8+
Fixes: f044b31867 ("btrfs: handle the ro->rw transition for mounting different subvolumes")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fdget() is the first thing done in scope, all matching fdput() are
immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=alpB
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more stability fixes. There's one patch adding export of MIPS
cmpxchg helper, used in the error propagation fix.
- fix error propagation from split bios to the original btrfs bio
- fix merging of adjacent extents (normal operation, defragmentation)
- fix potential use after free after freeing btrfs device structures"
* tag 'for-6.12-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix defrag not merging contiguous extents due to merged extent maps
btrfs: fix extent map merging not happening for adjacent extents
btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids()
btrfs: fix error propagation of split bios
MIPS: export __cmpxchg_small()
When running defrag (manual defrag) against a file that has extents that
are contiguous and we already have the respective extent maps loaded and
merged, we end up not defragging the range covered by those contiguous
extents. This happens when we have an extent map that was the result of
merging multiple extent maps for contiguous extents and the length of the
merged extent map is greater than or equals to the defrag threshold
length.
The script below reproduces this scenario:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a 256K file with 4 extents of 64K each.
xfs_io -f -c "falloc 0 64K" \
-c "pwrite 0 64K" \
-c "falloc 64K 64K" \
-c "pwrite 64K 64K" \
-c "falloc 128K 64K" \
-c "pwrite 128K 64K" \
-c "falloc 192K 64K" \
-c "pwrite 192K 64K" \
$MNT/foo
umount $MNT
echo -n "Initial number of file extent items: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 128K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 128K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 256K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 256K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
Running it:
$ ./test.sh
Initial number of file extent items: 4
Number of file extent items after defrag with 128K threshold: 4
Number of file extent items after defrag with 256K threshold: 4
The 4 extents don't get merged because we have an extent map with a size
of 256K that is the result of merging the individual extent maps for each
of the four 64K extents and at defrag_lookup_extent() we have a value of
zero for the generation threshold ('newer_than' argument) since this is a
manual defrag. As a consequence we don't call defrag_get_extent() to get
an extent map representing a single file extent item in the inode's
subvolume tree, so we end up using the merged extent map at
defrag_collect_targets() and decide not to defrag.
Fix this by updating defrag_lookup_extent() to always discard extent maps
that were merged and call defrag_get_extent() regardless of the minimum
generation threshold ('newer_than' argument).
A test case for fstests will be sent along soon.
CC: stable@vger.kernel.org # 6.1+
Fixes: 199257a78b ("btrfs: defrag: don't use merged extent map for their generation check")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have 3 or more adjacent extents in a file, that is, consecutive file
extent items pointing to adjacent extents, within a contiguous file range
and compatible flags, we end up not merging all the extents into a single
extent map.
For example:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -d -c "pwrite -b 64K 0 64K" \
-c "pwrite -b 64K 64K 64K" \
-c "pwrite -b 64K 128K 64K" \
-c "pwrite -b 64K 192K 64K" \
/mnt/sdc/foo
After all the ordered extents complete we unpin the extent maps and try
to merge them, but instead of getting a single extent map we get two
because:
1) When the first ordered extent completes (file range [0, 64K)) we
unpin its extent map and attempt to merge it with the extent map for
the range [64K, 128K), but we can't because that extent map is still
pinned;
2) When the second ordered extent completes (file range [64K, 128K)), we
unpin its extent map and merge it with the previous extent map, for
file range [0, 64K), but we can't merge with the next extent map, for
the file range [128K, 192K), because this one is still pinned.
The merged extent map for the file range [0, 128K) gets the flag
EXTENT_MAP_MERGED set;
3) When the third ordered extent completes (file range [128K, 192K)), we
unpin its extent map and attempt to merge it with the previous extent
map, for file range [0, 128K), but we can't because that extent map
has the flag EXTENT_MAP_MERGED set (mergeable_maps() returns false
due to different flags) while the extent map for the range [128K, 192K)
doesn't have that flag set.
We also can't merge it with the next extent map, for file range
[192K, 256K), because that one is still pinned.
At this moment we have 3 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 192K).
One for file range [192K, 256K) which is still pinned;
4) When the fourth and final extent completes (file range [192K, 256K)),
we unpin its extent map and attempt to merge it with the previous
extent map, for file range [128K, 192K), which succeeds since none
of these extent maps have the EXTENT_MAP_MERGED flag set.
So we end up with 2 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 256K), with the flag EXTENT_MAP_MERGED set.
Since after merging extent maps we don't attempt to merge again, that
is, merge the resulting extent map with the one that is now preceding
it (and the one following it), we end up with those two extent maps,
when we could have had a single extent map to represent the whole file.
Fix this by making mergeable_maps() ignore the EXTENT_MAP_MERGED flag.
While this doesn't present any functional issue, it prevents the merging
of extent maps which allows to save memory, and can make defrag not
merging extents too (that will be addressed in the next patch).
Fixes: 199257a78b ("btrfs: defrag: don't use merged extent map for their generation check")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Mounting btrfs from two images (which have the same one fsid and two
different dev_uuids) in certain executing order may trigger an UAF for
variable 'device->bdev_file' in __btrfs_free_extra_devids(). And
following are the details:
1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs
devices by ioctl(BTRFS_IOC_SCAN_DEV):
/ btrfs_device_1 → loop0
fs_device
\ btrfs_device_2 → loop1
2. mount /dev/loop0 /mnt
btrfs_open_devices
btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0)
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
fail: btrfs_close_devices // -ENOMEM
btrfs_close_bdev(btrfs_device_1)
fput(btrfs_device_1->bdev_file)
// btrfs_device_1->bdev_file is freed
btrfs_close_bdev(btrfs_device_2)
fput(btrfs_device_2->bdev_file)
3. mount /dev/loop1 /mnt
btrfs_open_devices
btrfs_get_bdev_and_sb(&bdev_file)
// EIO, btrfs_device_1->bdev_file is not assigned,
// which points to a freed memory area
btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1)
btrfs_fill_super
open_ctree
btrfs_free_extra_devids
if (btrfs_device_1->bdev_file)
fput(btrfs_device_1->bdev_file) // UAF !
Fix it by setting 'device->bdev_file' as 'NULL' after closing the
btrfs_device in btrfs_close_one_device().
Fixes: 1423881941 ("btrfs: do not background blkdev_put()")
CC: stable@vger.kernel.org # 4.19+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219408
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a helper to get the queue_limits from the bdev without having to
poke into the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241029141937.249920-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of the callers of wbc_account_cgroup_owner() are converting a folio
to page before calling the function. wbc_account_cgroup_owner() is
converting the page back to a folio to call mem_cgroup_css_from_folio().
Convert wbc_account_cgroup_owner() to take a folio instead of a page,
and convert all callers to pass a folio directly except f2fs.
Convert the page to folio for all the callers from f2fs as they were the
only callers calling wbc_account_cgroup_owner() with a page. As f2fs is
already in the process of converting to folios, these call sites might
also soon be calling wbc_account_cgroup_owner() with a folio directly in
the future.
No functional changes. Only compile tested.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240926140121.203821-1-kernel@pankajraghav.com
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sYxX
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- mount option fixes:
- fix handling of compression mount options on remount
- reject rw remount in case there are options that don't work
in read-write mode (like rescue options)
- fix zone accounting of unusable space
- fix in-memory corruption when merging extent maps
- fix delalloc range locking for sector < page
- use more convenient default value of drop subtree threshold, clean
more subvolumes without the fallback to marking quotas inconsistent
- fix smatch warning about incorrect value passed to ERR_PTR
* tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix passing 0 to ERR_PTR in btrfs_search_dir_index_item()
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
btrfs: fix read corruption due to race with extent map merging
btrfs: fix the delalloc range locking if sector size < page size
btrfs: qgroup: set a more sane default value for subtree drop threshold
btrfs: clear force-compress on remount when compress mount option is given
btrfs: zoned: fix zone unusable accounting for freed reserved extent
The purpose of btrfs_bbio_propagate_error() shall be propagating an error
of split bio to its original btrfs_bio, and tell the error to the upper
layer. However, it's not working well on some cases.
* Case 1. Immediate (or quick) end_bio with an error
When btrfs sends btrfs_bio to mirrored devices, btrfs calls
btrfs_bio_end_io() when all the mirroring bios are completed. If that
btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function
is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error()
accesses the orig_bbio's bio context to increase the error count.
That works well in most cases. However, if the end_io is called enough
fast, orig_bbio's (remaining part after split) bio context may not be
properly set at that time. Since the bio context is set when the orig_bbio
(the last btrfs_bio) is sent to devices, that might be too late for earlier
split btrfs_bio's completion. That will result in NULL pointer
dereference.
That bug is easily reproducible by running btrfs/146 on zoned devices [1]
and it shows the following trace.
[1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: writeback wb_workfn (flush-btrfs-5)
RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs]
BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0
RSP: 0018:ffffc9000006f248 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080
RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58
R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158
FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body.cold+0x19/0x26
? page_fault_oops+0x13e/0x2b0
? _printk+0x58/0x73
? do_user_addr_fault+0x5f/0x750
? exc_page_fault+0x76/0x240
? asm_exc_page_fault+0x22/0x30
? btrfs_bio_end_io+0xae/0xc0 [btrfs]
? btrfs_log_dev_io_error+0x7f/0x90 [btrfs]
btrfs_orig_write_end_io+0x51/0x90 [btrfs]
dm_submit_bio+0x5c2/0xa50 [dm_mod]
? find_held_lock+0x2b/0x80
? blk_try_enter_queue+0x90/0x1e0
__submit_bio+0xe0/0x130
? ktime_get+0x10a/0x160
? lockdep_hardirqs_on+0x74/0x100
submit_bio_noacct_nocheck+0x199/0x410
btrfs_submit_bio+0x7d/0x150 [btrfs]
btrfs_submit_chunk+0x1a1/0x6d0 [btrfs]
? lockdep_hardirqs_on+0x74/0x100
? __folio_start_writeback+0x10/0x2c0
btrfs_submit_bbio+0x1c/0x40 [btrfs]
submit_one_bio+0x44/0x60 [btrfs]
submit_extent_folio+0x13f/0x330 [btrfs]
? btrfs_set_range_writeback+0xa3/0xd0 [btrfs]
extent_writepage_io+0x18b/0x360 [btrfs]
extent_write_locked_range+0x17c/0x340 [btrfs]
? __pfx_end_bbio_data_write+0x10/0x10 [btrfs]
run_delalloc_cow+0x71/0xd0 [btrfs]
btrfs_run_delalloc_range+0x176/0x500 [btrfs]
? find_lock_delalloc_range+0x119/0x260 [btrfs]
writepage_delalloc+0x2ab/0x480 [btrfs]
extent_write_cache_pages+0x236/0x7d0 [btrfs]
btrfs_writepages+0x72/0x130 [btrfs]
do_writepages+0xd4/0x240
? find_held_lock+0x2b/0x80
? wbc_attach_and_unlock_inode+0x12c/0x290
? wbc_attach_and_unlock_inode+0x12c/0x290
__writeback_single_inode+0x5c/0x4c0
? do_raw_spin_unlock+0x49/0xb0
writeback_sb_inodes+0x22c/0x560
__writeback_inodes_wb+0x4c/0xe0
wb_writeback+0x1d6/0x3f0
wb_workfn+0x334/0x520
process_one_work+0x1ee/0x570
? lock_is_held_type+0xc6/0x130
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0xee/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: dm_mod btrfs blake2b_generic xor raid6_pq rapl
CR2: 0000000000000020
* Case 2. Earlier completion of orig_bbio for mirrored btrfs_bios
btrfs_bbio_propagate_error() assumes the end_io function for orig_bbio is
called last among split bios. In that case, btrfs_orig_write_end_io() sets
the bio->bi_status to BLK_STS_IOERR by seeing the bioc->error [2].
Otherwise, the increased orig_bio's bioc->error is not checked by anyone
and return BLK_STS_OK to the upper layer.
[2] Actually, this is not true. Because we only increases orig_bioc->errors
by max_errors, the condition "atomic_read(&bioc->error) > bioc->max_errors"
is still not met if only one split btrfs_bio fails.
* Case 3. Later completion of orig_bbio for un-mirrored btrfs_bios
In contrast to the above case, btrfs_bbio_propagate_error() is not working
well if un-mirrored orig_bbio is completed last. It sets
orig_bbio->bio.bi_status to the btrfs_bio's error. But, that is easily
over-written by orig_bbio's completion status. If the status is BLK_STS_OK,
the upper layer would not know the failure.
* Solution
Considering the above cases, we can only save the error status in the
orig_bbio (remaining part after split) itself as it is always
available. Also, the saved error status should be propagated when all the
split btrfs_bios are finished (i.e, bbio->pending_ios == 0).
This commit introduces "status" to btrfs_bbio and saves the first error of
split bios to original btrfs_bio's "status" variable. When all the split
bios are finished, the saved status is loaded into original btrfs_bio's
status.
With this commit, btrfs/146 on zoned devices does not hit the NULL pointer
dereference anymore.
Fixes: 852eee62d3 ("btrfs: allow btrfs_submit_bio to split bios")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ret may be zero in btrfs_search_dir_index_item() and should not
passed to ERR_PTR(). Now btrfs_unlink_subvol() is the only caller to
this, reconstructed it to check ERR_PTR(-ENOENT) while ret >= 0.
This fixes smatch warnings:
fs/btrfs/dir-item.c:353
btrfs_search_dir_index_item() warn: passing zero to 'ERR_PTR'
Fixes: 9dcbe16fcc ("btrfs: use btrfs_for_each_slot in btrfs_search_dir_index_item")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reports the following crash:
BTRFS info (device loop0 state MCS): disabling free space tree
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline]
RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041
Call Trace:
<TASK>
btrfs_commit_transaction+0x1eae/0x3740 fs/btrfs/transaction.c:2530
btrfs_delete_free_space_tree+0x383/0x730 fs/btrfs/free-space-tree.c:1312
btrfs_start_pre_rw_mount+0xf28/0x1300 fs/btrfs/disk-io.c:3012
btrfs_remount_rw fs/btrfs/super.c:1309 [inline]
btrfs_reconfigure+0xae6/0x2d40 fs/btrfs/super.c:1534
btrfs_reconfigure_for_mount fs/btrfs/super.c:2020 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2079 [inline]
btrfs_get_tree+0x918/0x1920 fs/btrfs/super.c:2115
vfs_get_tree+0x90/0x2b0 fs/super.c:1800
do_new_mount+0x2be/0xb40 fs/namespace.c:3472
do_mount fs/namespace.c:3812 [inline]
__do_sys_mount fs/namespace.c:4020 [inline]
__se_sys_mount+0x2d6/0x3c0 fs/namespace.c:3997
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
To support mounting different subvolume with different RO/RW flags for
the new mount APIs, btrfs introduced two workaround to support this feature:
- Skip mount option/feature checks if we are mounting a different
subvolume
- Reconfigure the fs to RW if the initial mount is RO
Combining these two, we can have the following sequence:
- Mount the fs ro,rescue=all,clear_cache,space_cache=v1
rescue=all will mark the fs as hard read-only, so no v2 cache clearing
will happen.
- Mount a subvolume rw of the same fs.
We go into btrfs_get_tree_subvol(), but fc_mount() returns EBUSY
because our new fc is RW, different from the original fs.
Now we enter btrfs_reconfigure_for_mount(), which switches the RO flag
first so that we can grab the existing fs_info.
Then we reconfigure the fs to RW.
- During reconfiguration, option/features check is skipped
This means we will restart the v2 cache clearing, and convert back to
v1 cache.
This will trigger fs writes, and since the original fs has "rescue=all"
option, it skips the csum tree read.
And eventually causing NULL pointer dereference in super block
writeback.
[FIX]
For reconfiguration caused by different subvolume RO/RW flags, ensure we
always run btrfs_check_options() to ensure we have proper hard RO
requirements met.
In fact the function btrfs_check_options() doesn't really do many
complex checks, but hard RO requirement and some feature dependency
checks, thus there is no special reason not to do the check for mount
reconfiguration.
Reported-by: syzbot+56360f93efa90ff15870@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/0000000000008c5d090621cb2770@google.com/
Fixes: f044b31867 ("btrfs: handle the ro->rw transition for mounting different subvolumes")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In debugging some corrupt squashfs files, we observed symptoms of
corrupt page cache pages but correct on-disk contents. Further
investigation revealed that the exact symptom was a correct page
followed by an incorrect, duplicate, page. This got us thinking about
extent maps.
commit ac05ca913e ("Btrfs: fix race between using extent maps and merging them")
enforces a reference count on the primary `em` extent_map being merged,
as that one gets modified.
However, since,
commit 3d2ac99224 ("btrfs: introduce new members for extent_map")
both 'em' and 'merge' get modified, which started modifying 'merge'
and thus introduced the same race.
We were able to reproduce this by looping the affected squashfs workload
in parallel on a bunch of separate btrfs-es while also dropping caches.
We are still working on a simple enough reproducer to make into an fstest.
The simplest fix is to stop modifying 'merge', which is not essential,
as it is dropped immediately after the merge. This behavior is simply
a consequence of the order of the two extent maps being important in
computing the new values. Modify merge_ondisk_extents to take prev and
next by const* and also take a third merged parameter that it puts the
results in. Note that this introduces the rather odd behavior of passing
'em' to merge_ondisk_extents as a const * and as a regular ptr.
Fixes: 3d2ac99224 ("btrfs: introduce new members for extent_map")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside lock_delalloc_folios(), there are several problems related to
sector size < page size handling:
- Set the writer locks without checking if the folio is still valid
We call btrfs_folio_start_writer_lock() just like it's folio_lock().
But since the folio may not even be the folio of the current mapping,
we can easily screw up the folio->private.
- The range is not clamped inside the page
This means we can over write other bitmaps if the start/len is not
properly handled, and trigger the btrfs_subpage_assert().
- @processed_end is always rounded up to page end
If the delalloc range is not page aligned, and we need to retry
(returning -EAGAIN), then we will unlock to the page end.
Thankfully this is not a huge problem, as now
btrfs_folio_end_writer_lock() can handle range larger than the locked
range, and only unlock what is already locked.
Fix all these problems by:
- Lock and check the folio first, then call
btrfs_folio_set_writer_lock()
So that if we got a folio not belonging to the inode, we won't
touch folio->private.
- Properly truncate the range inside the page
- Update @processed_end to the locked range end
Fixes: 1e1de38792 ("btrfs: make process_one_page() to handle subpage locking")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 011b46c304 ("btrfs: skip subtree scan if it's too high to
avoid low stall in btrfs_commit_transaction()"), btrfs qgroup can
automatically skip large subtree scan at the cost of marking qgroup
inconsistent.
It's designed to address the final performance problem of snapshot drop
with qgroup enabled, but to be safe the default value is
BTRFS_MAX_LEVEL, requiring a user space daemon to set a different value
to make it work.
I'd say it's not a good idea to rely on user space tool to set this
default value, especially when some operations (snapshot dropping) can
be triggered immediately after mount, leaving a very small window to
that that sysfs interface.
So instead of disabling this new feature by default, enable it with a
low threshold (3), so that large subvolume tree drop at mount time won't
cause huge qgroup workload.
CC: stable@vger.kernel.org # 6.1
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After the migration to use fs context for processing mount options we had
a slight change in the semantics for remounting a filesystem that was
mounted with compress-force. Before we could clear compress-force by
passing only "-o compress[=algo]" during a remount, but after that change
that does not work anymore, force-compress is still present and one needs
to pass "-o compress-force=no,compress[=algo]" to the mount command.
Example, when running on a kernel 6.8+:
$ mount -o compress-force=zlib:9 /dev/sdi /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:9,discard=async,space_cache=v2,subvolid=5,subvol=/)
$ mount -o remount,compress=zlib:5 /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:5,discard=async,space_cache=v2,subvolid=5,subvol=/)
On a 6.7 kernel (or older):
$ mount -o compress-force=zlib:9 /dev/sdi /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress-force=zlib:9,discard=async,space_cache=v2,subvolid=5,subvol=/)
$ mount -o remount,compress=zlib:5 /mnt/sdi
$ mount | grep sdi
/dev/sdi on /mnt/sdi type btrfs (rw,relatime,compress=zlib:5,discard=async,space_cache=v2,subvolid=5,subvol=/)
So update btrfs_parse_param() to clear "compress-force" when "compress" is
given, providing the same semantics as kernel 6.7 and older.
Reported-by: Roman Mamedov <rm@romanrm.net>
Link: https://lore.kernel.org/linux-btrfs/20241014182416.13d0f8b0@nvm/
CC: stable@vger.kernel.org # 6.8+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs reserves an extent and does not use it (e.g, by an error), it
calls btrfs_free_reserved_extent() to free the reserved extent. In the
process, it calls btrfs_add_free_space() and then it accounts the region
bytes as block_group->zone_unusable.
However, it leaves the space_info->bytes_zone_unusable side not updated. As
a result, ENOSPC can happen while a space_info reservation succeeded. The
reservation is fine because the freed region is not added in
space_info->bytes_zone_unusable, leaving that space as "free". OTOH,
corresponding block group counts it as zone_unusable and its allocation
pointer is not rewound, we cannot allocate an extent from that block group.
That will also negate space_info's async/sync reclaim process, and cause an
ENOSPC error from the extent allocation process.
Fix that by returning the space to space_info->bytes_zone_unusable.
Ideally, since a bio is not submitted for this reserved region, we should
return the space to free space and rewind the allocation pointer. But, it
needs rework on extent allocation handling, so let it work in this way for
now.
Fixes: 169e0da91a ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmcPxtAACgkQxWXV+ddt
WDu9lA//WfB88fwEKnqBYDRo6aiSMIAzLDuXkJ9i8d7rcjZO1OIZkEnMOsxhvTcZ
KxgjNjkgzoTyUwoAUlG+ZpvMeSNMhBdr2NFkXmYzN9oanFE4zplpZiWx6tGSApRU
0ilngjXBsr8p03HmB88Yb05DVYQ2elMP6Jx3VETDBa0CNyp4//tGKzusNhZdA7KM
XLZmkKRk3ZKabNo+p2J5t8UGJCl2L18U0o/EphfSkODKadUnsBbAPZUt2EGQCZwv
uZhDFAUkgTFBkeRO7JwTfDrNi51M4zwmh+kEduzg4Ny4TdFb1UapU7K1N330WMru
4Qa953Met9I4NB/kKI+fZP1lN4NGuD2qEU6yoZVSy4UiqRp1gEg8kOUfVGFbNJa1
VFYcwdrBad0I4PjnQc5bpZVjzqJT5wWiZxjlWrB7VyIfdmnvQxe5h4DBwBhN5FJr
+MEtuY2QNFygjDAZ5z0Ss8hegqI+FYi562Cjy9QRLhb3qGD8STF2BIChaILIn3oA
UVJUlUP6CUmCu1RZRMFB4/WkeHO46FmZxJErGfFeXqJInThf0/rdSZOQgIP0JsUq
N8FINEgXFAMCkK1PT7MNvAYkSP0tR7B0JjGKcSlGS3v3F0URCNGvHSiqbLedAtXT
lc1MdXTZxub8h6xhIvgY1j7HRAFGrunn7LD6MIKRWX1SZPWwAGI=
=DEUA
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- regression fix: dirty extents tracked in xarray for qgroups must be
adjusted for 32bit platforms
- fix potentially freeing uninitialized name in fscrypt structure
- fix warning about unneeded variable in a send callback
* tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix uninitialized pointer free on read_alloc_one_name() error
btrfs: send: cleanup unneeded return variable in changed_verity()
btrfs: fix uninitialized pointer free in add_inode_ref()
btrfs: use sector numbers as keys for the dirty extents xarray
The function read_alloc_one_name() does not initialize the name field of
the passed fscrypt_str struct if kmalloc fails to allocate the
corresponding buffer. Thus, it is not guaranteed that
fscrypt_str.name is initialized when freeing it.
This is a follow-up to the linked patch that fixes the remaining
instances of the bug introduced by commit e43eec81c5 ("btrfs: use
struct qstr instead of name and namelen pairs").
Link: https://lore.kernel.org/linux-btrfs/20241009080833.1355894-1-jroi.martin@gmail.com/
Fixes: e43eec81c5 ("btrfs: use struct qstr instead of name and namelen pairs")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Roi Martin <jroi.martin@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As all changed_* functions need to return something, just return 0
directly here, as the verity status is passed via the context.
Reported by LKP: fs/btrfs/send.c:6877:5-8: Unneeded variable: "ret". Return "0" on line 6883
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202410092305.WbyqspH8-lkp@intel.com/
Signed-off-by: Christian Heusel <christian@heusel.eu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The add_inode_ref() function does not initialize the "name" struct when
it is declared. If any of the following calls to "read_one_inode()
returns NULL,
dir = read_one_inode(root, parent_objectid);
if (!dir) {
ret = -ENOENT;
goto out;
}
inode = read_one_inode(root, inode_objectid);
if (!inode) {
ret = -EIO;
goto out;
}
then "name.name" would be freed on "out" before being initialized.
out:
...
kfree(name.name);
This issue was reported by Coverity with CID 1526744.
Fixes: e43eec81c5 ("btrfs: use struct qstr instead of name and namelen pairs")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Roi Martin <jroi.martin@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are using the logical address ("bytenr") of an extent as the key for
qgroup records in the dirty extents xarray. This is a problem because the
xarrays use "unsigned long" for keys/indices, meaning that on a 32 bits
platform any extent starting at or beyond 4G is truncated, which is a too
low limitation as virtually everyone is using storage with more than 4G of
space. This means a "bytenr" of 4G gets truncated to 0, and so does 8G and
16G for example, resulting in incorrect qgroup accounting.
Fix this by using sector numbers as keys instead, that is, using keys that
match the logical address right shifted by fs_info->sectorsize_bits, which
is what we do for the fs_info->buffer_radix that tracks extent buffers
(radix trees also use an "unsigned long" type for keys). This also makes
the index space more dense which helps optimize the xarray (as mentioned
at Documentation/core-api/xarray.rst).
Fixes: 3cce39a8ca ("btrfs: qgroup: use xarray to track dirty extents in transaction")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=lTqc
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- update fstrim loop and add more cancellation points, fix reported
delayed or blocked suspend if there's a huge chunk queued
- fix error handling in recent qgroup xarray conversion
- in zoned mode, fix warning printing device path without RCU
protection
- again fix invalid extent xarray state (6252690f7e), lost due to
refactoring
* tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix clear_dirty and writeback ordering in submit_one_sector()
btrfs: zoned: fix missing RCU locking in error message when loading zone info
btrfs: fix missing error handling when adding delayed ref with qgroups enabled
btrfs: add cancellation points to trim loops
btrfs: split remaining space to discard in chunks
Jeff Layton <jlayton@kernel.org> says:
The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around 1
per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide when to invalidate the cache. Even with NFSv4, a lot of
exported filesystems don't properly support a change attribute and are
subject to the same problems with timestamp granularity. Other
applications have similar issues with timestamps (e.g backup
applications).
If we were to always use fine-grained timestamps, that would improve the
situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
What we need is a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in inode->i_ctime_nsec
as a flag that indicates whether the current timestamps have been
queried via stat() or the like. When it's set, we allow the kernel to
use a fine-grained timestamp iff it's necessary to make the ctime show
a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible for a
file being changed to get a fine-grained timestamp. A file that is
altered just a bit later can then get a coarse-grained one that appears
older than the earlier fine-grained time. This violates timestamp
ordering guarantees.
To remedy this, keep a global monotonic atomic64_t value that acts as a
timestamp floor. When we go to stamp a file, we first get the latter of
the current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it with
that value.
If it has been queried, then first see whether the current coarse time
is later than the existing ctime. If it is, then we accept that value.
If it isn't, then we get a fine-grained time and try to swap that into
the global floor. Whether that succeeds or fails, we take the resulting
floor time, convert it to realtime and try to swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails, since
either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same floor
value as multigrain filesystems).
* patches from https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org:
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
Link: https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
Beyond enabling the FS_MGTIME flag, this patch eliminates
update_time_for_write, which goes to great pains to avoid in-memory
stores. Just have it overwrite the timestamps unconditionally.
Note that this also drops the IS_I_VERSION check and unconditionally
bumps the change attribute, since SB_I_VERSION is always set on btrfs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-11-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
This commit is a replay of commit 6252690f7e ("btrfs: fix invalid
mapping of extent xarray state"). We need to call
btrfs_folio_clear_dirty() before btrfs_set_range_writeback(), so that
xarray DIRTY tag is cleared.
With a refactoring commit 8189197425 ("btrfs: refactor
__extent_writepage_io() to do sector-by-sector submission"), it screwed
up and the order is reversed and causing the same hang. Fix the ordering
now in submit_one_sector().
Fixes: 8189197425 ("btrfs: refactor __extent_writepage_io() to do sector-by-sector submission")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_load_zone_info() we have an error path that is dereferencing
the name of a device which is a RCU string but we are not holding a RCU
read lock, which is incorrect.
Fix this by using btrfs_err_in_rcu() instead of btrfs_err().
The problem is there since commit 08e11a3db0 ("btrfs: zoned: load zone's
allocation offset"), back then at btrfs_load_block_group_zone_info() but
then later on that code was factored out into the helper
btrfs_load_zone_info() by commit 09a46725cc ("btrfs: zoned: factor out
per-zone logic from btrfs_load_block_group_zone_info").
Fixes: 08e11a3db0 ("btrfs: zoned: load zone's allocation offset")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When adding a delayed ref head, at delayed-ref.c:add_delayed_ref_head(),
if we fail to insert the qgroup record we don't error out, we ignore it.
In fact we treat it as if there was no error and there was already an
existing record - we don't distinguish between the cases where
btrfs_qgroup_trace_extent_nolock() returns 1, meaning a record already
existed and we can free the given record, and the case where it returns
a negative error value, meaning the insertion into the xarray that is
used to track records failed.
Effectively we end up ignoring that we are lacking qgroup record in the
dirty extents xarray, resulting in incorrect qgroup accounting.
Fix this by checking for errors and return them to the callers.
Fixes: 3cce39a8ca ("btrfs: qgroup: use xarray to track dirty extents in transaction")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are reports that system cannot suspend due to running trim because
the task responsible for trimming the device isn't able to finish in
time, especially since we have a free extent discarding phase, which can
trim a lot of unallocated space. There are no limits on the trim size
(unlike the block group part).
Since trime isn't a critical call it can be interrupted at any time,
in such cases we stop the trim, report the amount of discarded bytes and
return an error.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Per Qu Wenruo in case we have a very large disk, e.g. 8TiB device,
mostly empty although we will do the split according to our super block
locations, the last super block ends at 256G, we can submit a huge
discard for the range [256G, 8T), causing a large delay.
Split the space left to discard based on BTRFS_MAX_DISCARD_CHUNK_SIZE in
preparation of introduction of cancellation points to trim. The value
of the chunk size is arbitrary, it can be higher or derived from actual
device capabilities but we can't easily read that using
bio_discard_limit().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=yslr
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in incremental send, fix invalid clone operation for file that got
its size decreased
- fix __counted_by() annotation of send path cache entries, we do not
store the terminating NUL
- fix a longstanding bug in relocation (and quite hard to hit by
chance), drop back reference cache that can get out of sync after
transaction commit
- wait for fixup worker kthread before finishing umount
- add missing raid-stripe-tree extent for NOCOW files, zoned mode
cannot have NOCOW files but RST is meant to be a standalone feature
- handle transaction start error during relocation, avoid potential
NULL pointer dereference of relocation control structure (reported by
syzbot)
- disable module-wide rate limiting of debug level messages
- minor fix to tracepoint definition (reported by checkpatch.pl)
* tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: disable rate limiting when debug enabled
btrfs: wait for fixup workers before stopping cleaner kthread during umount
btrfs: fix a NULL pointer dereference when failed to start a new trasacntion
btrfs: send: fix invalid clone operation for file that got its size decreased
btrfs: tracepoints: end assignment with semicolon at btrfs_qgroup_extent event class
btrfs: drop the backref cache during relocation if we commit
btrfs: also add stripe entries for NOCOW writes
btrfs: send: fix buffer overflow detection when copying path to cache entry
We are close to removing the private_2 flag, so switch btrfs to using
owner_2 for its ordered flag. This is mostly used by buffer head
filesystems, so btrfs can use it because it doesn't use buffer heads.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20241002040111.1023018-5-willy@infradead.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Disable ratelimiting for btrfs_printk when CONFIG_BTRFS_DEBUG is
enabled. This allows for more verbose output which is often needed by
functions like btrfs_dump_space_info().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reported a NULL pointer dereference with the following crash:
FAULT_INJECTION: forcing a failure.
start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676
prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642
relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678
...
BTRFS info (device loop0): balance: ended with status: -12
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667]
RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926
Call Trace:
<TASK>
commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496
btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430
del_balance_item fs/btrfs/volumes.c:3678 [inline]
reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742
btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
The allocation failure happens at the start_transaction() inside
prepare_to_relocate(), and during the error handling we call
unset_reloc_control(), which makes fs_info->balance_ctl to be NULL.
Then we continue the error path cleanup in btrfs_balance() by calling
reset_balance_state() which will call del_balance_item() to fully delete
the balance item in the root tree.
However during the small window between set_reloc_contrl() and
unset_reloc_control(), we can have a subvolume tree update and created a
reloc_root for that subvolume.
Then we go into the final btrfs_commit_transaction() of
del_balance_item(), and into btrfs_update_reloc_root() inside
commit_fs_roots().
That function checks if fs_info->reloc_ctl is in the merge_reloc_tree
stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer
dereference.
[FIX]
Just add extra check on fs_info->reloc_ctl inside
btrfs_update_reloc_root(), before checking
fs_info->reloc_ctl->merge_reloc_tree.
That DEAD_RELOC_TREE handling is to prevent further modification to the
reloc tree during merge stage, but since there is no reloc_ctl at all,
we do not need to bother that.
Reported-by: syzbot+283673dbc38527ef9f3d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/66f6bfa7.050a0220.38ace9.0019.GAE@google.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During an incremental send we may end up sending an invalid clone
operation, for the last extent of a file which ends at an unaligned offset
that matches the final i_size of the file in the send snapshot, in case
the file had its initial size (the size in the parent snapshot) decreased
in the send snapshot. In this case the destination will fail to apply the
clone operation because its end offset is not sector size aligned and it
ends before the current size of the file.
Sending the truncate operation always happens when we finish processing an
inode, after we process all its extents (and xattrs, names, etc). So fix
this by ensuring the file has a valid size before we send a clone
operation for an unaligned extent that ends at the final i_size of the
file. The size we truncate to matches the start offset of the clone range
but it could be any value between that start offset and the final size of
the file since the clone operation will expand the i_size if the current
size is smaller than the end offset. The start offset of the range was
chosen because it's always sector size aligned and avoids a truncation
into the middle of a page, which results in dirtying the page due to
filling part of it with zeroes and then making the clone operation at the
receiver trigger IO.
The following test reproduces the issue:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a file with a size of 256K + 5 bytes, having two extents, one
# with a size of 128K and another one with a size of 128K + 5 bytes.
last_ext_size=$((128 * 1024 + 5))
xfs_io -f -d -c "pwrite -S 0xab -b 128K 0 128K" \
-c "pwrite -S 0xcd -b $last_ext_size 128K $last_ext_size" \
$MNT/foo
# Another file which we will later clone foo into, but initially with
# a larger size than foo.
xfs_io -f -c "pwrite -S 0xef 0 1M" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap1
# Now resize bar and clone foo into it.
xfs_io -c "truncate 0" \
-c "reflink $MNT/foo" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap2
rm -f /tmp/send-full /tmp/send-inc
btrfs send -f /tmp/send-full $MNT/snap1
btrfs send -p $MNT/snap1 -f /tmp/send-inc $MNT/snap2
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -f /tmp/send-full $MNT
btrfs receive -f /tmp/send-inc $MNT
umount $MNT
Running it before this patch:
$ ./test.sh
(...)
At subvol snap1
At snapshot snap2
ERROR: failed to clone extents to bar: Invalid argument
A test case for fstests will be sent soon.
Reported-by: Ben Millwood <thebenmachine@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJhrHS2z+WViO2h=ojYvBPDLsATwLbg+7JaNCyYomv0fUxEpQQ@mail.gmail.com/
Fixes: 46a6e10a1a ("btrfs: send: allow cloning non-aligned extent if it ends at i_size")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the inception of relocation we have maintained the backref cache
across transaction commits, updating the backref cache with the new
bytenr whenever we COWed blocks that were in the cache, and then
updating their bytenr once we detected a transaction id change.
This works as long as we're only ever modifying blocks, not changing the
structure of the tree.
However relocation does in fact change the structure of the tree. For
example, if we are relocating a data extent, we will look up all the
leaves that point to this data extent. We will then call
do_relocation() on each of these leaves, which will COW down to the leaf
and then update the file extent location.
But, a key feature of do_relocation() is the pending list. This is all
the pending nodes that we modified when we updated the file extent item.
We will then process all of these blocks via finish_pending_nodes, which
calls do_relocation() on all of the nodes that led up to that leaf.
The purpose of this is to make sure we don't break sharing unless we
absolutely have to. Consider the case that we have 3 snapshots that all
point to this leaf through the same nodes, the initial COW would have
created a whole new path. If we did this for all 3 snapshots we would
end up with 3x the number of nodes we had originally. To avoid this we
will cycle through each of the snapshots that point to each of these
nodes and update their pointers to point at the new nodes.
Once we update the pointer to the new node we will drop the node we
removed the link for and all of its children via btrfs_drop_subtree().
This is essentially just btrfs_drop_snapshot(), but for an arbitrary
point in the snapshot.
The problem with this is that we will never reflect this in the backref
cache. If we do this btrfs_drop_snapshot() for a node that is in the
backref tree, we will leave the node in the backref tree. This becomes
a problem when we change the transid, as now the backref cache has
entire subtrees that no longer exist, but exist as if they still are
pointed to by the same roots.
In the best case scenario you end up with "adding refs to an existing
tree ref" errors from insert_inline_extent_backref(), where we attempt
to link in nodes on roots that are no longer valid.
Worst case you will double free some random block and re-use it when
there's still references to the block.
This is extremely subtle, and the consequences are quite bad. There
isn't a way to make sure our backref cache is consistent between
transid's.
In order to fix this we need to simply evict the entire backref cache
anytime we cross transid's. This reduces performance in that we have to
rebuild this backref cache every time we change transid's, but fixes the
bug.
This has existed since relocation was added, and is a pretty critical
bug. There's a lot more cleanup that can be done now that this
functionality is going away, but this patch is as small as possible in
order to fix the problem and make it easy for us to backport it to all
the kernels it needs to be backported to.
Followup series will dismantle more of this code and simplify relocation
drastically to remove this functionality.
We have a reproducer that reproduced the corruption within a few minutes
of running. With this patch it survives several iterations/hours of
running the reproducer.
Fixes: 3fd0a5585e ("Btrfs: Metadata ENOSPC handling for balance")
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
NOCOW writes do not generate stripe_extent entries in the RAID stripe
tree, as the RAID stripe-tree feature initially was designed with a
zoned filesystem in mind and on a zoned filesystem, we do not allow NOCOW
writes. But the RAID stripe-tree feature is independent from the zoned
feature, so we must also do NOCOW writes for RAID stripe-tree filesystems.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=wGXc
-----END PGP SIGNATURE-----
Merge tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix dangling pointer to rb-tree of defragmented inodes after cleanup
- a followup fix to handle concurrent lseek on the same fd that could
leak memory under some conditions
- fix wrong root id reported in tree checker when verifying dref
* tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix use-after-free on rbtree that tracks inodes for auto defrag
btrfs: tree-checker: fix the wrong output of data backref objectid
btrfs: fix race setting file private on concurrent lseek using same fd
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
When cleaning up defrag inodes at btrfs_cleanup_defrag_inodes(), called
during remount and unmount, we are freeing every node from the rbtree
that tracks inodes for auto defrag using
rbtree_postorder_for_each_entry_safe(), which doesn't modify the tree
itself. So once we unlock the lock that protects the rbtree, we have a
tree pointing to a root that was freed (and a root pointing to freed
nodes, and their children pointing to other freed nodes, and so on).
This makes further access to the tree result in a use-after-free with
unpredictable results.
Fix this by initializing the rbtree to an empty root after the call to
rbtree_postorder_for_each_entry_safe() and before unlocking.
Fixes: 276940915f ("btrfs: clear defragmented inodes using postorder in btrfs_cleanup_defrag_inodes()")
Reported-by: syzbot+ad7966ca1f5dd8b001b3@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000f9aad406223eabff@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There are some reports about invalid data backref objectids, the report
looks like this:
BTRFS critical (device sda): corrupt leaf: block=333654787489792 slot=110 extent bytenr=333413935558656 len=65536 invalid data ref objectid value 2543
The data ref objectid is the inode number inside the subvolume.
But in above case, the value is completely sane, not really showing the
problem.
[CAUSE]
The root cause of the problem is the deprecated feature, inode cache.
This feature results a special inode number, -12ULL, and it's no longer
recognized by tree-checker, triggering the error.
The direct problem here is the output of data ref objectid. The value
shown is in fact the dref_root (subvolume id), not the dref_objectid
(inode number).
[FIX]
Fix the output to use dref_objectid instead.
Reported-by: Neil Parton <njparton@gmail.com>
Reported-by: Archange <archange@archlinux.org>
Link: https://lore.kernel.org/linux-btrfs/CAAYHqBbrrgmh6UmW3ANbysJX9qG9Pbg3ZwnKsV=5mOpv_qix_Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/9541deea-9056-406e-be16-a996b549614d@archlinux.org/
Fixes: f333a3c7e8 ("btrfs: tree-checker: validate dref root and objectid")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing concurrent lseek(2) system calls against the same file
descriptor, using multiple threads belonging to the same process, we have
a short time window where a race happens and can result in a memory leak.
The race happens like this:
1) A program opens a file descriptor for a file and then spawns two
threads (with the pthreads library for example), lets call them
task A and task B;
2) Task A calls lseek with SEEK_DATA or SEEK_HOLE and ends up at
file.c:find_desired_extent() while holding a read lock on the inode;
3) At the start of find_desired_extent(), it extracts the file's
private_data pointer into a local variable named 'private', which has
a value of NULL;
4) Task B also calls lseek with SEEK_DATA or SEEK_HOLE, locks the inode
in shared mode and enters file.c:find_desired_extent(), where it also
extracts file->private_data into its local variable 'private', which
has a NULL value;
5) Because it saw a NULL file private, task A allocates a private
structure and assigns to the file structure;
6) Task B also saw a NULL file private so it also allocates its own file
private and then assigns it to the same file structure, since both
tasks are using the same file descriptor.
At this point we leak the private structure allocated by task A.
Besides the memory leak, there's also the detail that both tasks end up
using the same cached state record in the private structure (struct
btrfs_file_private::llseek_cached_state), which can result in a
use-after-free problem since one task can free it while the other is
still using it (only one task took a reference count on it). Also, sharing
the cached state is not a good idea since it could result in incorrect
results in the future - right now it should not be a problem because it
end ups being used only in extent-io-tree.c:count_range_bits() where we do
range validation before using the cached state.
Fix this by protecting the private assignment and check of a file while
holding the inode's spinlock and keep track of the task that allocated
the private, so that it's used only by that task in order to prevent
user-after-free issues with the cached state record as well as potentially
using it incorrectly in the future.
Fixes: 3c32c7212f ("btrfs: use cached state when looking for delalloc ranges with lseek")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=uuLl
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD changes via Song:
- md-bitmap refactoring (Yu Kuai)
- raid5 performance optimization (Artur Paszkiewicz)
- Other small fixes (Yu Kuai, Chen Ni)
- Add a sysfs entry 'new_level' (Xiao Ni)
- Improve information reported in /proc/mdstat (Mateusz Kusiak)
- NVMe changes via Keith:
- Asynchronous namespace scanning (Stuart)
- TCP TLS updates (Hannes)
- RDMA queue controller validation (Niklas)
- Align field names to the spec (Anuj)
- Metadata support validation (Puranjay)
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)
- Add missing unplug trace event (Keith)
- blk-iocost fixes (Colin, Konstantin)
- t10-pi modular removal and fixes (Alexey)
- Fix for potential BLKSECDISCARD overflow (Alexey)
- bio splitting cleanups and fixes (Christoph)
- Deal with folios rather than rather than pages, speeding up how the
block layer handles bigger IOs (Kundan)
- Use spinlocks rather than bit spinlocks in zram (Sebastian, Mike)
- Reduce zoned device overhead in ublk (Ming)
- Add and use sendpages_ok() for drbd and nvme-tcp (Ofir)
- Fix regression in partition error pointer checking (Riyan)
- Add support for write zeroes and rotational status in nbd (Wouter)
- Add Yu Kuai as new BFQ maintainer. The scheduler has been
unmaintained for quite a while.
- Various sets of fixes for BFQ (Yu Kuai)
- Misc fixes and cleanups (Alvaro, Christophe, Li, Md Haris, Mikhail,
Yang)
* tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux: (120 commits)
nvme-pci: qdepth 1 quirk
block: fix potential invalid pointer dereference in blk_add_partition
blk_iocost: make read-only static array vrate_adj_pct const
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
nvme-tcp: fix link failure for TCP auth
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
...
[SUBPAGE COMPRESSION LIMITS]
Currently inside writepage_delalloc(), if a delalloc range is going to
be submitted asynchronously (inline or compression, the page
dirty/writeback/unlock are all handled in at different time, not at the
submission time), then we return 1 and extent_writepage() will skip the
submission.
This is fine if every sector matches page size, but if a sector is
smaller than page size (aka, subpage case), then it can be very
problematic, for example for the following 64K page:
0 16K 32K 48K 64K
|/| |///////| |/|
| |
4K 52K
Where |/| is the dirty range we need to submit.
In the above case, we need the following different handling for the 3
ranges:
- [0, 4K) needs to be submitted for regular write
A single sector cannot be compressed.
- [16K, 32K) needs to be submitted for compressed write
- [48K, 52K) needs to be submitted for regular write.
Above, if we try to submit [16K, 32K) for compressed write, we will
return 1 and immediately, and without submitting the remaining
[48K, 52K) range.
Furthermore, since extent_writepage() will exit without unlocking any
sectors, the submitted range [0, 4K) will not have sector unlocked.
That's the reason why for now subpage is only allowed for full page
range.
[ENHANCEMENT]
- Introduce a submission bitmap at btrfs_bio_ctrl::submit_bitmap
This records which sectors will be submitted by extent_writepage_io().
This allows us to track which sectors needs to be submitted thus later
to be properly unlocked.
For asynchronously submitted range (inline/compression), the
corresponding bits will be cleared from that bitmap.
- Only return 1 if no sector needs to be submitted in
writepage_delalloc()
- Only submit sectors marked by submission bitmap inside
extent_writepage_io()
So we won't touch the asynchronously submitted part.
- Introduce btrfs_folio_end_writer_lock_bitmap() helper
This will only unlock the involved sectors specified by @bitmap
parameter, to avoid touching the range asynchronously submitted.
Please note that, since subpage compression is still limited to page
aligned range, this change is only a preparation for future sector
perfect compression support for subpage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_folio_unlock_writer() is already calling
btrfs_folio_end_writer_lock() to do the heavy lifting work, the only
missing 0 writer check.
Thus there is no need to keep two different functions, move the 0 writer
check into btrfs_folio_end_writer_lock(), and remove
btrfs_folio_unlock_writer().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All cleanup paths lead to btrfs_path_free so path can be defined with
the automatic freeing callback in the following functions:
- btrfs_insert_orphan_item()
- btrfs_del_orphan_item()
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All cleanup paths lead to btrfs_path_free so path can be defined with
the automatic freeing callback in the following functions:
- calculate_emulated_zone_size()
- calculate_alloc_pointer()
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a DEFINE_FREE for struct btrfs_path. This defines a function that
can be called using the __free attribute. Define a macro
BTRFS_PATH_AUTO_FREE to make the declaration of an auto freeing path
very clear.
The intended use is to define the auto free of path in cases where the
path is allocated somewhere at the beginning and freed either on all
error paths or at the end of the function.
int func() {
BTRFS_PATH_AUTO_FREE(path);
if (...)
return -ERROR;
path = alloc_path();
...
if (...)
return -ERROR;
...
return 0;
}
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
[ update changelog ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_folio_end_all_writers() is only utilized in
extent_writepage() as a way to unlock all subpage range (for both
successful submission and error handling).
Meanwhile we have a similar function, btrfs_folio_end_writer_lock().
The difference is, btrfs_folio_end_writer_lock() expects a range that is
a subset of the already locked range.
This limit on btrfs_folio_end_writer_lock() is a little overkilled,
preventing it from being utilized for error paths.
So here we enhance btrfs_folio_end_writer_lock() to accept a superset of
the locked range, and only end the locked subset.
This means we can replace btrfs_folio_end_all_writers() with
btrfs_folio_end_writer_lock() instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Continue adding const to parameters. This is for clarity and minor
addition to safety. There are some minor effects, in the assembly code
and .ko measured on release config.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently BTRFS_I is a static inline function that takes a const inode
and returns btrfs inode, dropping the 'const' qualifier. This can break
assumptions of compiler though it seems there's no real case.
To make the parameter and return type consistent regardint const we can
use the container_of_const() that preserves it. However this would not
check the parameter type. To fix that use the same _Generic construct
but implement only the two expected types.
Signed-off-by: David Sterba <dsterba@suse.com>
We have a few places that check if we have the inode locked by doing:
ASSERT(inode_is_locked(vfs_inode));
This actually proved to be useful several times as if assertions are
enabled (and by default they are in many distros) it immediately triggers
a crash which is impossible for users to miss.
However that doesn't check if the lock is held by the calling task, so
the check passes if some other task locked the inode.
Using one of the lockdep functions to check the lock is held, like
lockdep_assert_held() for example, does check that the calling task
holds the lock, and if that's not the case it produces a warning and
stack trace in dmesg. However, despite the misleading "assert" in the
name of the lockdep helpers, it does not trigger a crash/BUG_ON(), just
a warning and splat in dmesg, which is easy to get unnoticed by users
who may have lockdep enabled.
So add a helper that does the ASSERT() and calls lockdep_assert_held()
immediately after and use it every where we check the inode is locked.
Like this if the lock is held by some other task we get the warning
in dmesg which is caught by fstests, very helpful during development,
and may also be occassionaly noticed by users with lockdep enabled.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Even in case of failure we could've discarded some data and userspace
should be made aware of it, so copy fstrim_range to userspace
regardless.
Also make sure to update the trimmed bytes amount even if
btrfs_trim_free_extents fails.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Moreover find_or_create_page() is compatible API, and it can
replaced with __filemap_get_folio(). Some interfaces have been converted
to use folio before, so the conversion operation from page can be
eliminated here.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Based on the previous patch, the compression path can be
directly used in folio without converting to page.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And memcpy_to_page() can be replaced with memcpy_to_folio().
But there is no memzero_folio(), but it can be replaced equivalently by
folio_zero_range().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And memcpy_to_page() can be replaced with memcpy_to_folio().
But there is no memzero_folio(), but it can be replaced equivalently by
folio_zero_range().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And memcpy_to_page() can be replaced with memcpy_to_folio().
But there is no memzero_folio(), but it can be replaced equivalently by
folio_zero_range().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And page_to_inode() can be replaced with folio_to_inode() now.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Moreover, use folio_pos() instead of page_offset(),
which is more consistent with folio usage.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Moreover, use folio_pos() instead of page_offset(),
which is more consistent with folio usage.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Moreover, use kmap_local_folio() instead of kmap_local_page(),
which is more consistent with folio usage.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And use folio_pos instead of page_offset, which is more
consistent with folio usage. At the same time, folio_test_private() can
handle folio directly without converting from page to folio first.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Use folio_pos instead of page_offset, which is more
consistent with folio usage.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Now clear_page_extent_mapped() can deal with a folio
directly, so change its name to clear_folio_extent_mapped().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs compression path is not really subpage compatible, every
thing is still done in page unit.
That's fine for regular sector size and subpage routine. As even for
subpage routine compression is only enabled if the whole range is page
aligned, so reading the page cache in page unit is totally fine.
However in preparation for the future subpage perfect compression
support, we need to change the compression routine to properly handle a
subpage range.
This patch would prepare both zlib and zstd to only read the subpage
range for compression.
Lzo is already doing subpage aware read, as lzo's on-disk format is
already sectorsize dependent.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are only two differences between the two functions:
- btrfs_orig_bbio_end_io() does extra error propagation
This is mostly to allow tolerance for write errors.
- btrfs_orig_bbio_end_io() does extra pending_ios check
This check can handle both the original bio, or the cloned one.
(All accounting happens in the original one).
This makes btrfs_orig_bbio_end_io() a much safer call.
In fact we already had a double freeing error due to usage of
btrfs_bio_end_io() in the error path of btrfs_submit_chunk().
So just move the whole content of btrfs_orig_bbio_end_io() into
btrfs_bio_end_io().
For normal paths this brings no change, because they are already calling
btrfs_orig_bbio_end_io() in the first place.
For error paths (not only inside bio.c but also external callers), this
change will introduce extra checks, especially for external callers, as
they will error out without submitting the btrfs bio.
But considering it's already in the error path, such slower but much
safer checks are still an overall win.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Historically we've held the extent lock throughout the entire read.
There's been a few reasons for this, but it's mostly just caused us
problems. For example, this prevents us from allowing page faults
during direct io reads, because we could deadlock. This has forced us
to only allow 4k reads at a time for io_uring NOWAIT requests because we
have no idea if we'll be forced to page fault and thus have to do a
whole lot of work.
On the buffered side we are protected by the page lock, as long as we're
reading things like buffered writes, punch hole, and even direct IO to a
certain degree will get hung up on the page lock while the page is in
flight.
On the direct side we have the dio extent lock, which acts much like the
way the extent lock worked previously to this patch, however just for
direct reads. This protects direct reads from concurrent direct writes,
while we're protected from buffered writes via the inode lock.
Now that we're protected in all cases, narrow the extent lock to the
part where we're getting the extent map to submit the reads, no longer
holding the extent lock for the entire read operation. Push the extent
lock down into do_readpage() so that we're only grabbing it when looking
up the extent map. This portion was contributed by Goldwyn.
Co-developed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we hold the extent lock for the entire duration of a read.
This isn't really necessary in the buffered case, we're protected by the
page lock, however it's necessary for O_DIRECT.
For O_DIRECT reads, if we only locked the extent for the part where we
get the extent, we could potentially race with an O_DIRECT write in the
same region. This isn't really a problem, unless the read is delayed so
much that the write does the COW, unpins the old extent, and some other
application re-allocates the extent before the read is actually able to
be submitted. At that point at best we'd have a checksum mismatch, but
at worse we could read data that doesn't belong to us.
To address this potential race we need to make sure we don't have
overlapping, concurrent direct io reads and writes.
To accomplish this use the new EXTENT_DIO_LOCKED bit in the direct IO
case in the same spot as the current extent lock. The writes will take
this while they're creating the ordered extent, which is also used to
make sure concurrent buffered reads or concurrent direct reads are not
allowed to occur, and drop it after the ordered extent is taken. For
reads it will act as the current read behavior for the EXTENT_LOCKED
bit, we set it when we're starting the read, we clear it in the end_io
to allow other direct writes to continue.
This still has the drawback of disallowing concurrent overlapping direct
reads from occurring, but that exists with the current extent locking.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to support dropping the extent lock during a read we need a way
to make sure that direct reads and direct writes for overlapping ranges
are protected from each other. To accomplish this introduce another
lock bit specifically for direct io. Subsequent patches will utilize
this to protect direct IO operations.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Defrag ioctl passes readahead from the file, but autodefrag does not
have a file so the readahead state is allocated when needed.
The autodefrag loop in cleaner thread iterates over inodes so we can
simply provide an on-stack readahead state and will not need to allocate
it in btrfs_defrag_file(). The size is 32 bytes which is acceptable.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one caller inode_should_defrag() that passes NULL to
btrfs_add_inode_defrag() so we can drop it an simplify the code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The potential memory allocation failure is not a fatal error, skipping
autodefrag is fine and the caller inode_should_defrag() does not care
about the errors. Further writes can attempt to add the inode back to
the defragmentation list again.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_cleanup_defrag_inodes() is not called frequently, only in remount
or unmount, but the way it frees the inodes in fs_info->defrag_inodes
is inefficient. Each time it needs to locate first node, remove it,
potentially rebalance tree until it's done. This allows to do a
conditional reschedule.
For cleanups the rbtree_postorder_for_each_entry_safe() iterator is
convenient but we can't reschedule and restart iteration because some of
the tree nodes would be already freed.
The cleanup operation is kmem_cache_free() which will likely take the
fast path for most objects so rescheduling should not be necessary.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function does not follow the pattern where the underscores would be
justified, so rename it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function does not follow the pattern where the underscores would be
justified, so rename it.
Also update the misleading comment, the passed item is not freed, that's
what the caller does.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function does not follow the pattern where the underscores would be
justified, so rename it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A comparator function does not change its parameters, make them const.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function does not follow the pattern where the underscores would be
justified, so rename it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function does not follow the pattern where the underscores would be
justified, so rename it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previous patch freed the function name btrfs_submit_bio() so we can use
it for a helper that submits struct bio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function name is a bit misleading as it submits the btrfs_bio
(bbio), rename it so we can use btrfs_submit_bio() when an actual bio is
submitted.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The member btrfs_fs_info::subpage_info stores the cached bitmap start
position inside the merged bitmap.
However in reality there is only one thing depending on the sectorsize,
bitmap_nr_bits, which records the number of sectors that fit inside a
page.
The sequence of sub-bitmaps have fixed order, thus it's just a quick
multiplication to calculate the start position of each sub-bitmaps.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter @nr_ret is used to tell the caller how many sectors have
been submitted for IO.
Then callers check @nr_ret value to determine if we need to manually
clear the PAGECACHE_TAG_DIRTY, as if we submitted no sector (e.g. all
sectors are beyond i_size) there is no folio_start_writeback() called thus
PAGECACHE_TAG_DIRTY tag will not be cleared.
Remove this parameter by:
- Moving the btrfs_folio_clear_writeback() call into
__extent_writepage_io()
So that if we didn't submit any IO, then manually call
btrfs_folio_set_writeback() to clear PAGECACHE_TAG_DIRTY when
the page is no longer dirty.
- Use a bool to record if we have submitted any sector
Instead of an int.
- Use subpage compatible helpers to end folio writeback.
This brings no change to the behavior, just for the sake of consistency.
As for the call site inside __extent_writepage(), we're always called
for the whole page, so the existing full page helper
folio_(start|end)_writeback() is totally fine.
For the call site inside extent_write_locked_range(), although we can
have subpage range, folio_start_writeback() will only clear
PAGECACHE_TAG_DIRTY if the page is no longer dirty, and the full folio
will still be dirty if there is any subpage dirty range.
Only when the last dirty subpage sector is cleared, the
folio_start_writeback() will clear PAGECACHE_TAG_DIRTY.
So no matter if we call the full page or subpage helper, the result
is still the same, then just use the subpage helpers for consistency.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a few obvious grammar mistakes: a -> an, then -> than.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use xarray to track dirty extents to reduce the size of the struct
btrfs_qgroup_extent_record from 64 bytes to 40 bytes. The xarray is
more cache line friendly, it also reduces the complexity of insertion
and search code compared to rb tree.
Another change introduced is about error handling. Before this patch,
the result of btrfs_qgroup_trace_extent_nolock() is always a success. In
this patch, because of this function calls the function xa_store() which
has the possibility to fail, so mark qgroup as inconsistent if error
happened and then free preallocated memory. Also we preallocate memory
before spin_lock(), if memory preallcation failed, error handling is the
same the existing code.
Suggested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Junchao Sun <sunjunchao2870@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Clean up resources using goto to get rid of repeated code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Junchao Sun <sunjunchao2870@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike the bitmap usage inside raid56, for __extent_writepage_io() we
handle the subpage submission not sector-by-sector, but for each dirty
range we found.
This is not a big deal normally, as the subpage complex code is already
mostly optimized out by the compiler for x86_64.
However for the sake of consistency and for the future of subpage
sector-perfect compression support, this patch does:
- Extract the sector submission code into submit_one_sector()
- Add the needed code to extract the dirty bitmap for subpage case
There is a small pitfall for non-subpage case, as we cleared page
dirty before starting writeback, so we have to manually set
the default dirty_bitmap to 1 for such case.
- Use bitmap_and() to calculate the target sectors we need to submit
This is done for both subpage and non-subpage cases, and will later
be expanded to skip inline/compression ranges.
For x86_64, the dirty bitmap will be fixed to 1, with the length of 1,
so we're still doing the same workload per sector.
For larger page sizes, the overhead will be a little larger, as previous
we only need to do one extent_map lookup per-dirty-range, but now it
will be one extent_map lookup per-sector.
But that is the same frequency as x86_64, so we're just aligning the
behavior to x86_64.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In commit 75258f20fb ("btrfs: subpage: dump extra subpage bitmaps for
debug") an internal macro GET_SUBPAGE_BITMAP() is introduced to grab the
bitmap of each attribute.
But that commit is using bitmap_cut() which will do the left shift of
the larger bitmap, causing incorrect values.
Thankfully this bitmap_cut() is only called for debug usage, and so far
it's not yet causing problem.
Fix it to use bitmap_read() to only grab the desired sub-bitmap.
Fixes: 75258f20fb ("btrfs: subpage: dump extra subpage bitmaps for debug")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we're calling btrfs_num_copies() before btrfs_get_chunk_map() in
btrfs_map_block(). But btrfs_num_copies() itself does a chunk map lookup
to be able to calculate the number of copies.
So split out the code getting the number of copies from btrfs_num_copies()
into a helper called btrfs_chunk_map_num_copies() and directly call it
from btrfs_map_block() and btrfs_num_copies().
This saves us one rbtree lookup per btrfs_map_block() invocation.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BTRFS_IOC_SYNC ioctl wants to wake up the cleaner kthread so that it
does any pending work (subvolume deletion, delayed iputs, etc), however
it is waking up the transaction kthread, which in turn wakes up the
cleaner. Since we don't have any transaction to commit, as any ongoing
transaction was already committed when it called btrfs_sync_fs() and
the goal is just to wake up the cleaner thread, directly wake up the
cleaner instead of the transaction kthread.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs only supports sectorsize 4K, 8K, 16K, 32K, 64K for now, thus for
systems with 4K page size, there is no way the fs is subpage (sectorsize
< PAGE_SIZE).
So here we define btrfs_is_subpage() different according to the
PAGE_SIZE:
- PAGE_SIZE > 4K
We may hit real subpage cases, define btrfs_is_subpage() as a regular
function and do the usual checks.
- PAGE_SIZE == 4K (no smaller PAGE_SIZE support AFAIK)
There is no way the fs is subpage, so just define btrfs_is_subpage()
as an inline function which always return false.
This saves about 7K bytes for x86_64 debug builds:
text data bss dec hex filename
Before: 1484452 168693 25776 1678921 199e49 fs/btrfs/btrfs.ko
After: 1476605 168445 25776 1670826 197eaa fs/btrfs/btrfs.ko
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that RAID stripe-tree lookup failures are not treated as a fatal issue
any more, change the RAID stripe-tree lookup error message to debug level.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Set rst_search_commit_root in the btrfs_io_stripe we're passing to
btrfs_map_block() in case we're doing data relocation.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename 'btrfs_io_stripe::is_scrub' to 'rst_search_commit_root'. While
'is_scrub' describes the state of the io_stripe (it is a stripe submitted
by scrub) it does not describe the purpose, namely looking at the commit
root when searching RAID stripe-tree entries.
Renaming the stripe to rst_search_commit_root describes this purpose.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This just creates unnecessary noise and doesn't provide any insights into
debugging RAID stripe-tree related issues.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a comment to document the complicated locked_page unlock logic in
cow_file_range_inline. The specifically tricky part is that a caller
just up the stack converts ret == 0 to ret == 1 and then another
caller far up the callstack handles ret == 1 as a success, AND returns
without cleanup in that case, both of which "feel" unnatural and led to
the original bug.
Try to document that somewhat specific callstack logic here to explain
the weird un-setting of locked_folio on success.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
When iterating the chunk maps when a device replace finishes we are doing
a full rbtree search for each chunk map, which is not the most efficient
thing to do, wasting CPU time. As we are holding a write lock on the tree
during the whole iteration, we can simply start from the first node in the
tree and then move to the next chunk map by doing a rb_next() call - the
only exception is when we need to reschedule, in which case we have to do
a full rbtree search since we dropped the write lock and the tree may have
changed (chunk maps may have been removed and the tree got rebalanced).
So just do that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At the end of a device replace we must go over all the chunk maps and
update their stripes to point to the target device instead of the source
device. We iterate over the chunk maps while holding a write lock and
we never reschedule, which can result in monopolizing a CPU for too long
and blocking readers for too long (it's a rw lock, non-blocking).
So improve on this by rescheduling if necessary. This is safe because at
this point we are holding the chunk mutex, which means no new chunks can
be allocated and therefore we don't risk missing a new chunk map that
covers a range behind the last one we processed before rescheduling.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of getting a page and using that to clear dirty for io, use the
folio helper and use the appropriate folio functions.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only use a page to copy in the data for the inline extent. Use a
folio for this instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already use a lot of functions here that use folios, update the
function to use __filemap_get_folio instead of find_get_page and then
use the folio directly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently this already uses a folio for most things, update it to take a
folio and update all the page usage with the corresponding folio usage.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already use a folio some in this function, replace all page usage
with the folio and update the function to take the folio as an argument.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_get_extent takes a folio, update __get_extent_map to
take a folio as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only pass this into read_inline_extent, change it to take a folio and
update the callers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a page, use a folio instead, take a folio as an
argument, and update the callers appropriately.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update uncompress_inline to take a folio and update it's usage
accordingly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now the fixup creator and consumer use folios, change this to use a
folio as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of a page, use a folio for btrfs_writepage_cow_fixup. We
already have a folio at the only caller, and the fixup worker uses
folios.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function heavily messes with pages, instead update it to use a
folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This mostly uses folios already, update it to take a folio and update
the rest of the function to use the folio instead of the page.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing in the page for ->locked_page, make it hold a
locked_folio and then update the users of async_chunk to act
accordingly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that every function that btrfs_run_delalloc_range calls takes a
folio, update it to take a folio and update the callers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This just passes the page into the compressed machinery to keep track of
the locked page. Update this to take a folio and convert it to a page
where appropriate.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_cleanup_ordered_extents is operating mostly with folios,
update it to use a folio instead of a page, and the update the function
and the callers as appropriate.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We walk through pages in this function and clear ordered, and the
function for this uses folios. Update the function to use a folio for
this whole operation.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now all of the functions that use locked_page in run_delalloc_nocow take
a folio, update it to take a folio and update the caller.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With this we can pass the folio directly into cow_file_range().
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Convert this to take a folio and pass it into all of the various cleanup
functions. Update the callers to pass in a folio instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we want the folio in this function, convert it to take a folio
directly and use that.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We pass the folio into extent_write_locked_range, go ahead and take a
folio to pass along, and update the callers to pass in a folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This mostly uses folios, convert it to take a folio instead and update
the callers to pass in the folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of taking the locked page, take the locked folio so we can pass
that into __process_folios_contig.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that this mostly uses folios, update it to take folios, use the
folios that are passed in, and rename from process_one_page =>
process_one_folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This operates mostly on folios, update it to take a folio for the locked
folio instead of the page, rename from __process_pages_contig =>
__process_folios_contig.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All of the callers have a folio at this point, update
__unlock_for_delalloc to take a folio so that it's consistent with its
callers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Also rename lock_delalloc_pages => lock_delalloc_folios in the process,
now that it exclusively works on folios.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing in a page for locked_page, pass in the folio instead.
We only use the folio itself to validate some range assumptions, and
then pass it into other functions.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already use a folio heavily in this function, pass the folio in
directly and use it everywhere, only passing the page down to functions
that do not take a folio yet.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only need a folio now, make it take a folio as an argument and update
all of the callers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callers and callee's of this now all use folios, update it to take a
folio as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass in a folio instead, and use a folio instead of a page.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already have a folio that we're using in btrfs_page_mkwrite, update
the rest of the function to use folio everywhere else. This will make
it easier on Willy when he drops page->index.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Willy is going to get rid of page->index, and add_ra_bio_pages uses
page->index. Make his life easier by converting add_ra_bio_pages to use
folios so that we are no longer using page->index.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've gotten most of the helpers updated to only take a folio,
update __extent_writepage to only deal in folios.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using pages for everything, find a folio and use that. This
makes things a bit cleaner as a lot of the functions calls here all take
folios.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__extent_writepage_io uses page everywhere, but a lot of these functions
take a folio. Convert it to use the folio based helpers, and then
change it to take a folio as an argument and update its callers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Willy is wanting to get rid of page->index, convert the writepage
tracepoint to take a folio so we can do folio->index instead of
page->index.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the callers and helpers mostly use folio, convert
btrfs_do_readpage to take a folio, and rename it to btrfs_do_read_folio.
Update all of the page stuff to use the folio based helpers instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callers of this helper are going to be converted to using a folio,
so adjust submit_extent_page to become submit_extent_folio and update it
to use all the relevant folio helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This already uses a folio internally, change it to take a folio as an
argument instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this helper function to set the page range uptodate once we're
done reading it, as well as run fsverity against it. Half of these
functions already take a folio, just rename this to end_folio_read and
then rework it to take a folio instead, and update everything
accordingly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we're using the page for everything here. Convert this to use
the folio helpers instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're the only user of readahead_page_batch(). Convert
btrfs_readahead() to use the folio based helpers to do readahead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ENHANCEMENT]
When mounting a btrfs filesystem, the filesystem opens the block device,
and if this fails, there is no message about it. Print a message about
it to help debugging.
[TEST]
I have a btrfs filesystem on three block devices, one of which is
write-protected, so regular mounts fail, but there is no message in
dmesg.
/dev/vdb normal
/dev/vdc write protected
/dev/vdd normal
Before patch:
$ sudo mount /dev/vdb /mnt/
mount: mount(2) failed: no such file or directory
$ sudo dmesg # Show only messages about missing block devices
....
[ 352.947196] BTRFS error (device vdb): devid 2 uuid 4ee2c625-a3b2-4fe0-b411-756b23e08533 missing
....
After patch:
$ sudo mount /dev/vdb /mnt/
mount: mount(2) failed: no such file or directory
$ sudo dmesg # Show bdev_file_open_by_path failed.
....
[ 352.944328] BTRFS error: failed to open device for path /dev/vdc with flags 0x3: -13
[ 352.947196] BTRFS error (device vdb): missing devid 2 uuid 4ee2c625-a3b2-4fe0-b411-756b23e08533
....
Signed-off-by: Li Zhang <zhanglikernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Functions btrfs_uuid_scan_kthread() and btrfs_create_uuid_tree() are for
UUID tree rescan and creation, it's not suitable for volumes.[ch].
Move them to uuid-tree.[ch] instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At extent_map_block_end() we are calling the inline functions
extent_map_block_start() and extent_map_block_len() multiple times, which
results in expanding their code multiple times, increasing the compiled
code size and repeating the computations those functions do.
Improve this by caching their results in local variables.
The size of the module before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1755770 163800 16920 1936490 1d8c6a fs/btrfs/btrfs.ko
And after this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1755656 163800 16920 1936376 1d8bf8 fs/btrfs/btrfs.ko
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_delete_raid_extent() was written under the assumption, that it's
call-chain always passes a start, length tuple that matches a single
extent. But btrfs_delete_raid_extent() is called by
do_free_extent_accounting() which in turn is called by
__btrfs_free_extent().
But this call-chain passes in a start address and a length that can
possibly match multiple on-disk extents.
To make this possible, we have to adjust the start and length of each
btree node lookup, to not delete beyond the requested range.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update a stripe extent in case of an already existing logical address,
but with different physical addresses and/or device id instead of
bailing out with EEXIST.
This can happen i.e. in case of a device replace operation, where data
extents get rewritten to a new disk.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:
1) Attempt a fsync without holding the inode's lock, triggering an
assertion failures when assertions are enabled;
2) Do an invalid memory access from the fsync task because the file private
points to memory allocated on stack by the direct IO task and it may be
used by the fsync task after the stack was destroyed.
The race happens like this:
1) A user space program opens a file descriptor with O_DIRECT;
2) The program spawns 2 threads using libpthread for example;
3) One of the threads uses the file descriptor to do direct IO writes,
while the other calls fsync using the same file descriptor.
4) Call task A the thread doing direct IO writes and task B the thread
doing fsyncs;
5) Task A does a direct IO write, and at btrfs_direct_write() sets the
file's private to an on stack allocated private with the member
'fsync_skip_inode_lock' set to true;
6) Task B enters btrfs_sync_file() and sees that there's a private
structure associated to the file which has 'fsync_skip_inode_lock' set
to true, so it skips locking the inode's VFS lock;
7) Task A completes the direct IO write, and resets the file's private to
NULL since it had no prior private and our private was stack allocated.
Then it unlocks the inode's VFS lock;
8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
assertion that checks the inode's VFS lock is held fails, since task B
never locked it and task A has already unlocked it.
The stack trace produced is the following:
assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:983!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
Code: 50 d6 86 c0 e8 (...)
RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x24
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? exc_invalid_op+0x50/0x70
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? asm_exc_invalid_op+0x1a/0x20
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? __seccomp_filter+0x31d/0x4f0
__x64_sys_fdatasync+0x4f/0x90
do_syscall_64+0x82/0x160
? do_futex+0xcb/0x190
? __x64_sys_futex+0x10e/0x1d0
? switch_fpu_return+0x4f/0xd0
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Another problem here is if task B grabs the private pointer and then uses
it after task A has finished, since the private was allocated in the stack
of task A, it results in some invalid memory access with a hard to predict
result.
This issue, triggering the assertion, was observed with QEMU workloads by
two users in the Link tags below.
Fix this by not relying on a file's private to pass information to fsync
that it should skip locking the inode and instead pass this information
through a special value stored in current->journal_info. This is safe
because in the relevant section of the direct IO write path we are not
holding a transaction handle, so current->journal_info is NULL.
The following C program triggers the issue:
$ cat repro.c
/* Get the O_DIRECT definition. */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <pthread.h>
static int fd;
static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset)
{
while (count > 0) {
ssize_t ret;
ret = pwrite(fd, buf, count, offset);
if (ret < 0) {
if (errno == EINTR)
continue;
return ret;
}
count -= ret;
buf += ret;
}
return 0;
}
static void *fsync_loop(void *arg)
{
while (1) {
int ret;
ret = fsync(fd);
if (ret != 0) {
perror("Fsync failed");
exit(6);
}
}
}
int main(int argc, char *argv[])
{
long pagesize;
void *write_buf;
pthread_t fsyncer;
int ret;
if (argc != 2) {
fprintf(stderr, "Use: %s <file path>\n", argv[0]);
return 1;
}
fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666);
if (fd == -1) {
perror("Failed to open/create file");
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
if (pagesize == -1) {
perror("Failed to get page size");
return 2;
}
ret = posix_memalign(&write_buf, pagesize, pagesize);
if (ret) {
perror("Failed to allocate buffer");
return 3;
}
ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL);
if (ret != 0) {
fprintf(stderr, "Failed to create writer thread: %d\n", ret);
return 4;
}
while (1) {
ret = do_write(fd, write_buf, pagesize, 0);
if (ret != 0) {
perror("Write failed");
exit(5);
}
}
return 0;
}
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt/sdi
$ timeout 10 ./repro /mnt/sdi/foo
Usually the race is triggered within less than 1 second. A test case for
fstests will follow soon.
Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187
Reported-by: Andreas Jahn <jahn-andi@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199
Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/
Fixes: 939b656bc8 ("btrfs: fix corruption after buffer fault in during direct IO append write")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs rejects to mount a FS if it finds a block group with a broken write
pointer (e.g, unequal write pointers on two zones of RAID1 block group).
Since such case can happen easily with a power-loss or crash of a system,
we need to handle the case more gently.
Handle such block group by making it unallocatable, so that there will be
no writes into it. That can be done by setting the allocation pointer at
the end of allocating region (= block_group->zone_capacity). Then, existing
code handle zone_unusable properly.
Having proper zone_capacity is necessary for the change. So, set it as fast
as possible.
We cannot handle RAID0 and RAID10 case like this. But, they are anyway
unable to read because of a missing stripe.
Fixes: 265f7237dd ("btrfs: zoned: allow DUP on meta-data block groups")
Fixes: 568220fa96 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree")
CC: stable@vger.kernel.org # 6.1+
Reported-by: HAN Yuwei <hrx@bupt.moe>
Cc: Xuefer <xuefer@gmail.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The local extent changeset is passed to clear_record_extent_bits() where
it may have some additional memory dynamically allocated for ulist. When
qgroup is disabled, the memory is leaked because in this case the
changeset is not released upon __btrfs_qgroup_release_data() return.
Since the recorded contents of the changeset are not used thereafter, just
don't pass it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Reported-by: syzbot+81670362c283f3dd889c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000aa8c0c060ade165e@google.com
Fixes: af0e2aab3b ("btrfs: qgroup: flush reservations during quota disable")
CC: stable@vger.kernel.org # 6.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David Sterba <dsterba@suse.com>
The current setup with bio_may_exceed_limit and __bio_split_to_limits
is a bit of a mess.
Change it so that __bio_split_to_limits does all the work and is just
a variant of bio_split_to_limits that returns nr_segs. This is done
by inlining it and instead have the various bio_split_* helpers directly
submit the potentially split bios.
To support btrfs, the rw version has a lower level helper split out
that just returns the offset to split. This turns out to nicely clean
up the btrfs flow as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Link: https://lore.kernel.org/r/20240826173820.1690925-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The return variable 'ret' at btrfs_reclaim_sweep() is never assigned if
none of the space infos is reclaimable (for example if periodic reclaim
is disabled, which is the default), so we return an undefined value.
This can be fixed my making btrfs_reclaim_sweep() not return any value
as well as do_reclaim_sweep() because:
1) do_reclaim_sweep() always returns 0, so we can make it return void;
2) The only caller of btrfs_reclaim_sweep() (btrfs_reclaim_bgs()) doesn't
care about its return value, and in its context there's nothing to do
about any errors anyway.
Therefore remove the return value from btrfs_reclaim_sweep() and
do_reclaim_sweep().
Fixes: e4ca3932ae ("btrfs: periodic block_group reclaim")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is an internal report that KASAN is reporting use-after-free, with
the following backtrace:
BUG: KASAN: slab-use-after-free in btrfs_check_read_bio+0xa68/0xb70 [btrfs]
Read of size 4 at addr ffff8881117cec28 by task kworker/u16:2/45
CPU: 1 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.11.0-rc2-next-20240805-default+ #76
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
dump_stack_lvl+0x61/0x80
print_address_description.constprop.0+0x5e/0x2f0
print_report+0x118/0x216
kasan_report+0x11d/0x1f0
btrfs_check_read_bio+0xa68/0xb70 [btrfs]
process_one_work+0xce0/0x12a0
worker_thread+0x717/0x1250
kthread+0x2e3/0x3c0
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x11/0x20
Allocated by task 20917:
kasan_save_stack+0x37/0x60
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x7d/0x80
kmem_cache_alloc_noprof+0x16e/0x3e0
mempool_alloc_noprof+0x12e/0x310
bio_alloc_bioset+0x3f0/0x7a0
btrfs_bio_alloc+0x2e/0x50 [btrfs]
submit_extent_page+0x4d1/0xdb0 [btrfs]
btrfs_do_readpage+0x8b4/0x12a0 [btrfs]
btrfs_readahead+0x29a/0x430 [btrfs]
read_pages+0x1a7/0xc60
page_cache_ra_unbounded+0x2ad/0x560
filemap_get_pages+0x629/0xa20
filemap_read+0x335/0xbf0
vfs_read+0x790/0xcb0
ksys_read+0xfd/0x1d0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 20917:
kasan_save_stack+0x37/0x60
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x50
__kasan_slab_free+0x4b/0x60
kmem_cache_free+0x214/0x5d0
bio_free+0xed/0x180
end_bbio_data_read+0x1cc/0x580 [btrfs]
btrfs_submit_chunk+0x98d/0x1880 [btrfs]
btrfs_submit_bio+0x33/0x70 [btrfs]
submit_one_bio+0xd4/0x130 [btrfs]
submit_extent_page+0x3ea/0xdb0 [btrfs]
btrfs_do_readpage+0x8b4/0x12a0 [btrfs]
btrfs_readahead+0x29a/0x430 [btrfs]
read_pages+0x1a7/0xc60
page_cache_ra_unbounded+0x2ad/0x560
filemap_get_pages+0x629/0xa20
filemap_read+0x335/0xbf0
vfs_read+0x790/0xcb0
ksys_read+0xfd/0x1d0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[CAUSE]
Although I cannot reproduce the error, the report itself is good enough
to pin down the cause.
The call trace is the regular endio workqueue context, but the
free-by-task trace is showing that during btrfs_submit_chunk() we
already hit a critical error, and is calling btrfs_bio_end_io() to error
out. And the original endio function called bio_put() to free the whole
bio.
This means a double freeing thus causing use-after-free, e.g.:
1. Enter btrfs_submit_bio() with a read bio
The read bio length is 128K, crossing two 64K stripes.
2. The first run of btrfs_submit_chunk()
2.1 Call btrfs_map_block(), which returns 64K
2.2 Call btrfs_split_bio()
Now there are two bios, one referring to the first 64K, the other
referring to the second 64K.
2.3 The first half is submitted.
3. The second run of btrfs_submit_chunk()
3.1 Call btrfs_map_block(), which by somehow failed
Now we call btrfs_bio_end_io() to handle the error
3.2 btrfs_bio_end_io() calls the original endio function
Which is end_bbio_data_read(), and it calls bio_put() for the
original bio.
Now the original bio is freed.
4. The submitted first 64K bio finished
Now we call into btrfs_check_read_bio() and tries to advance the bio
iter.
But since the original bio (thus its iter) is already freed, we
trigger the above use-after free.
And even if the memory is not poisoned/corrupted, we will later call
the original endio function, causing a double freeing.
[FIX]
Instead of calling btrfs_bio_end_io(), call btrfs_orig_bbio_end_io(),
which has the extra check on split bios and do the proper refcounting
for cloned bios.
Furthermore there is already one extra btrfs_cleanup_bio() call, but
that is duplicated to btrfs_orig_bbio_end_io() call, so remove that
label completely.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: 852eee62d3 ("btrfs: allow btrfs_submit_bio to split bios")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a warning (probably on some older compiler version):
fs/btrfs/fiemap.c: warning: 'last_extent_end' may be used uninitialized in this function [-Wmaybe-uninitialized]: => 822:19
Initialize the variable to 0 although it's not necessary as it's either
properly set or not used after an error. The called function is in the
same file so this is a false alert but we want to fix all
-Wmaybe-uninitialized reports.
Link: https://lore.kernel.org/all/20240819070639.2558629-1-geert@linux-m68k.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Sterba <dsterba@suse.com>
We have transient failures with btrfs/301, specifically in the part
where we do
for i in $(seq 0 10); do
write 50m to file
rm -f file
done
Sometimes this will result in a transient quota error, and it's because
sometimes we start writeback on the file which results in a delayed
iput, and thus the rm doesn't actually clean the file up. When we're
flushing the quota space we need to run the delayed iputs to make sure
all the unlinks that we think have completed have actually completed.
This removes the small window where we could fail to find enough space
in our quota.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_add_free_space_zoned() references and modifies bg's alloc_offset,
ro, and zone_unusable, but without taking the lock. It is mostly safe
because they monotonically increase (at least for now) and this function is
mostly called by a transaction commit, which is serialized by itself.
Still, taking the lock is a safer and correct option and I'm going to add a
change to reset zone_unusable while a block group is still alive. So, add
locking around the operations.
Fixes: 169e0da91a ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[REPORT]
There is a corruption report that btrfs refused to mount a fs that has
overlapping dev extents:
BTRFS error (device sdc): dev extent devid 4 physical offset 14263979671552 overlap with previous dev extent end 14263980982272
BTRFS error (device sdc): failed to verify dev extents against chunks: -117
BTRFS error (device sdc): open_ctree failed
[CAUSE]
The direct cause is very obvious, there is a bad dev extent item with
incorrect length.
With btrfs check reporting two overlapping extents, the second one shows
some clue on the cause:
ERROR: dev extent devid 4 offset 14263979671552 len 6488064 overlap with previous dev extent end 14263980982272
ERROR: dev extent devid 13 offset 2257707008000 len 6488064 overlap with previous dev extent end 2257707270144
ERROR: errors found in extent allocation tree or chunk allocation
The second one looks like a bitflip happened during new chunk
allocation:
hex(2257707008000) = 0x20da9d30000
hex(2257707270144) = 0x20da9d70000
diff = 0x00000040000
So it looks like a bitflip happened during new dev extent allocation,
resulting the second overlap.
Currently we only do the dev-extent verification at mount time, but if the
corruption is caused by memory bitflip, we really want to catch it before
writing the corruption to the storage.
Furthermore the dev extent items has the following key definition:
(<device id> DEV_EXTENT <physical offset>)
Thus we can not just rely on the generic key order check to make sure
there is no overlapping.
[ENHANCEMENT]
Introduce dedicated dev extent checks, including:
- Fixed member checks
* chunk_tree should always be BTRFS_CHUNK_TREE_OBJECTID (3)
* chunk_objectid should always be
BTRFS_FIRST_CHUNK_CHUNK_TREE_OBJECTID (256)
- Alignment checks
* chunk_offset should be aligned to sectorsize
* length should be aligned to sectorsize
* key.offset should be aligned to sectorsize
- Overlap checks
If the previous key is also a dev-extent item, with the same
device id, make sure we do not overlap with the previous dev extent.
Reported: Stefan N <stefannnau@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+W5K0rSO3koYTo=nzxxTm1-Pdu1HYgVxEpgJ=aGc7d=E8mGEg@mail.gmail.com/
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlink changes the link count on the target inode. POSIX mandates that
the ctime must also change when this occurs.
According to https://pubs.opengroup.org/onlinepubs/9699919799/functions/unlink.html:
"Upon successful completion, unlink() shall mark for update the last data
modification and last file status change timestamps of the parent
directory. Also, if the file's link count is not 0, the last file status
change timestamp of the file shall be marked for update."
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add link to the opengroup docs ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add the __counted_by compiler attribute to the flexible array member
name to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we a find that an extent is shared but its end offset is not sector
size aligned, then we don't clone it and issue write operations instead.
This is because the reflink (remap_file_range) operation does not allow
to clone unaligned ranges, except if the end offset of the range matches
the i_size of the source and destination files (and the start offset is
sector size aligned).
While this is not incorrect because send can only guarantee that a file
has the same data in the source and destination snapshots, it's not
optimal and generates confusion and surprising behaviour for users.
For example, running this test:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Use a file size not aligned to any possible sector size.
file_size=$((1 * 1024 * 1024 + 5)) # 1MB + 5 bytes
dd if=/dev/random of=$MNT/foo bs=$file_size count=1
cp --reflink=always $MNT/foo $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap
rm -f /tmp/send-test
btrfs send -f /tmp/send-test $MNT/snap
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -vv -f /tmp/send-test $MNT
xfs_io -r -c "fiemap -v" $MNT/snap/bar
umount $MNT
Gives the following result:
(...)
mkfile o258-7-0
rename o258-7-0 -> bar
write bar - offset=0 length=49152
write bar - offset=49152 length=49152
write bar - offset=98304 length=49152
write bar - offset=147456 length=49152
write bar - offset=196608 length=49152
write bar - offset=245760 length=49152
write bar - offset=294912 length=49152
write bar - offset=344064 length=49152
write bar - offset=393216 length=49152
write bar - offset=442368 length=49152
write bar - offset=491520 length=49152
write bar - offset=540672 length=49152
write bar - offset=589824 length=49152
write bar - offset=638976 length=49152
write bar - offset=688128 length=49152
write bar - offset=737280 length=49152
write bar - offset=786432 length=49152
write bar - offset=835584 length=49152
write bar - offset=884736 length=49152
write bar - offset=933888 length=49152
write bar - offset=983040 length=49152
write bar - offset=1032192 length=16389
chown bar - uid=0, gid=0
chmod bar - mode=0644
utimes bar
utimes
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=06d640da-9ca1-604c-b87c-3375175a8eb3, stransid=7
/mnt/sdi/snap/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2055]: 26624..28679 2056 0x1
There's no clone operation to clone extents from the file foo into file
bar and fiemap confirms there's no shared flag (0x2000).
So update send_write_or_clone() so that it proceeds with cloning if the
source and destination ranges end at the i_size of the respective files.
After this changes the result of the test is:
(...)
mkfile o258-7-0
rename o258-7-0 -> bar
clone bar - source=foo source offset=0 offset=0 length=1048581
chown bar - uid=0, gid=0
chmod bar - mode=0644
utimes bar
utimes
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=582420f3-ea7d-564e-bbe5-ce440d622190, stransid=7
/mnt/sdi/snap/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2055]: 26624..28679 2056 0x2001
A test case for fstests will also follow up soon.
Link: https://github.com/kdave/btrfs-progs/issues/572#issuecomment-2282841416
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the extent map shrinker can be run by any task when attempting
to allocate memory and there's enough memory pressure to trigger it.
To avoid too much latency we stop iterating over extent maps and removing
them once the task needs to reschedule. This logic was introduced in commit
b3ebb9b7e9 ("btrfs: stop extent map shrinker if reschedule is needed").
While that solved high latency problems for some use cases, it's still
not enough because with a too high number of tasks entering the extent map
shrinker code, either due to memory allocations or because they are a
kswapd task, we end up having a very high level of contention on some
spin locks, namely:
1) The fs_info->fs_roots_radix_lock spin lock, which we need to find
roots to iterate over their inodes;
2) The spin lock of the xarray used to track open inodes for a root
(struct btrfs_root::inodes) - on 6.10 kernels and below, it used to
be a red black tree and the spin lock was root->inode_lock;
3) The fs_info->delayed_iput_lock spin lock since the shrinker adds
delayed iputs (calls btrfs_add_delayed_iput()).
Instead of allowing the extent map shrinker to be run by any task, make
it run only by kswapd tasks. This still solves the problem of running
into OOM situations due to an unbounded extent map creation, which is
simple to trigger by direct IO writes, as described in the changelog
of commit 956a17d9d0 ("btrfs: add a shrinker for extent maps"), and
by a similar case when doing buffered IO on files with a very large
number of holes (keeping the file open and creating many holes, whose
extent maps are only released when the file is closed).
Reported-by: kzd <kzd@56709.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219121
Reported-by: Octavia Togami <octavia.togami@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAHPNGSSt-a4ZZWrtJdVyYnJFscFjP9S7rMcvEMaNSpR556DdLA@mail.gmail.com/
Fixes: 956a17d9d0 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Tested-by: kzd <kzd@56709.net>
Tested-by: Octavia Togami <octavia.togami@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[REPORT]
There is a bug report that kernel is rejecting a mismatching inode mode
and its dir item:
[ 1881.553937] BTRFS critical (device dm-0): inode mode mismatch with
dir: inode mode=040700 btrfs type=2 dir type=0
[CAUSE]
It looks like the inode mode is correct, while the dir item type
0 is BTRFS_FT_UNKNOWN, which should not be generated by btrfs at all.
This may be caused by a memory bit flip.
[ENHANCEMENT]
Although tree-checker is not able to do any cross-leaf verification, for
this particular case we can at least reject any dir type with
BTRFS_FT_UNKNOWN.
So here we enhance the dir type check from [0, BTRFS_FT_MAX), to
(0, BTRFS_FT_MAX).
Although the existing corruption can not be fixed just by such enhanced
checking, it should prevent the same 0x2->0x0 bitflip for dir type to
reach disk in the future.
Reported-by: Kota <nospam@kota.moe>
Link: https://lore.kernel.org/linux-btrfs/CACsxjPYnQF9ZF-0OhH16dAx50=BXXOcP74MxBc3BG+xae4vTTw@mail.gmail.com/
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the patch 78c52d9eb6 ("btrfs: check for refs on snapshot delete
resume") I added some code to handle file systems that had been
corrupted by a bug that incorrectly skipped updating the drop progress
key while dropping a snapshot. This code would check to see if we had
already deleted our reference for a child block, and skip the deletion
if we had already.
Unfortunately there is a bug, as the check would only check the on-disk
references. I made an incorrect assumption that blocks in an already
deleted snapshot that was having the deletion resume on mount wouldn't
be modified.
If we have 2 pending deleted snapshots that share blocks, we can easily
modify the rules for a block. Take the following example
subvolume a exists, and subvolume b is a snapshot of subvolume a. They
share references to block 1. Block 1 will have 2 full references, one
for subvolume a and one for subvolume b, and it belongs to subvolume a
(btrfs_header_owner(block 1) == subvolume a).
When deleting subvolume a, we will drop our full reference for block 1,
and because we are the owner we will drop our full reference for all of
block 1's children, convert block 1 to FULL BACKREF, and add a shared
reference to all of block 1's children.
Then we will start the snapshot deletion of subvolume b. We look up the
extent info for block 1, which checks delayed refs and tells us that
FULL BACKREF is set, so sets parent to the bytenr of block 1. However
because this is a resumed snapshot deletion, we call into
check_ref_exists(). Because check_ref_exists() only looks at the disk,
it doesn't find the shared backref for the child of block 1, and thus
returns 0 and we skip deleting the reference for the child of block 1
and continue. This orphans the child of block 1.
The fix is to lookup the delayed refs, similar to what we do in
btrfs_lookup_extent_info(). However we only care about whether the
reference exists or not. If we fail to find our reference on disk, go
look up the bytenr in the delayed refs, and if it exists look for an
existing ref in the delayed ref head. If that exists then we know we
can delete the reference safely and carry on. If it doesn't exist we
know we have to skip over this block.
This bug has existed since I introduced this fix, however requires
having multiple deleted snapshots pending when we unmount. We noticed
this in production because our shutdown path stops the container on the
system, which deletes a bunch of subvolumes, and then reboots the box.
This gives us plenty of opportunities to hit this issue. Looking at the
history we've seen this occasionally in production, but we had a big
spike recently thanks to faster machines getting jobs with multiple
subvolumes in the job.
Chris Mason wrote a reproducer which does the following
mount /dev/nvme4n1 /btrfs
btrfs subvol create /btrfs/s1
simoop -E -f 4k -n 200000 -z /btrfs/s1
while(true) ; do
btrfs subvol snap /btrfs/s1 /btrfs/s2
simoop -f 4k -n 200000 -r 10 -z /btrfs/s2
btrfs subvol snap /btrfs/s2 /btrfs/s3
btrfs balance start -dusage=80 /btrfs
btrfs subvol del /btrfs/s2 /btrfs/s3
umount /btrfs
btrfsck /dev/nvme4n1 || exit 1
mount /dev/nvme4n1 /btrfs
done
On the second loop this would fail consistently, with my patch it has
been running for hours and hasn't failed.
I also used dm-log-writes to capture the state of the failure so I could
debug the problem. Using the existing failure case to test my patch
validated that it fixes the problem.
Fixes: 78c52d9eb6 ("btrfs: check for refs on snapshot delete resume")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=03Gf
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix double inode unlock for direct IO sync writes (reported by
syzbot)
- fix root tree id/name map definitions, don't use fixed size buffers
for name (reported by -Werror=unterminated-string-initialization)
- fix qgroup reserve leaks in bufferd write path
- update scrub status structure more often so it can be reported in
user space more accurately and let 'resume' not repeat work
- in preparation to remove space cache v1 in the future print a warning
if it's detected
* tag 'for-6.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid using fixed char array size for tree names
btrfs: fix double inode unlock for direct IO sync writes
btrfs: emit a warning about space cache v1 being deprecated
btrfs: fix qgroup reserve leaks in cow_file_range
btrfs: implement launder_folio for clearing dirty page reserve
btrfs: scrub: update last_physical after scrubbing one stripe
btrfs: factor out stripe length calculation into a helper
[BUG]
There is a bug report that using the latest trunk GCC 15, btrfs would cause
unterminated-string-initialization warning:
linux-6.6/fs/btrfs/print-tree.c:29:49: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
29 | { BTRFS_BLOCK_GROUP_TREE_OBJECTID, "BLOCK_GROUP_TREE" },
|
^~~~~~~~~~~~~~~~~~
[CAUSE]
To print tree names we have an array of root_name_map structure, which
uses "char name[16];" to store the name string of a tree.
But the following trees have names exactly at 16 chars length:
- "BLOCK_GROUP_TREE"
- "RAID_STRIPE_TREE"
This means we will have no space for the terminating '\0', and can lead
to unexpected access when printing the name.
[FIX]
Instead of "char name[16];" use "const char *" instead.
Since the name strings are all read-only data, and are all NULL
terminated by default, there is not much need to bother the length at
all.
Reported-by: Sam James <sam@gentoo.org>
Reported-by: Alejandro Colomar <alx@kernel.org>
Fixes: edde81f1ab ("btrfs: add raid stripe tree pretty printer")
Fixes: 9c54e80ddc ("btrfs: add code to support the block group root")
CC: stable@vger.kernel.org # 6.1+
Suggested-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we do a direct IO sync write, at btrfs_sync_file(), and we need to skip
inode logging or we get an error starting a transaction or an error when
flushing delalloc, we end up unlocking the inode when we shouldn't under
the 'out_release_extents' label, and then unlock it again at
btrfs_direct_write().
Fix that by checking if we have to skip inode unlocking under that label.
Reported-by: syzbot+7dbbb74af6291b5a5a8b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000dfd631061eaeb4bc@google.com/
Fixes: 939b656bc8 ("btrfs: fix corruption after buffer fault in during direct IO append write")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've been wanting to get rid of this for a while, add a message to
indicate that this feature is going away and when so we can finally have
a date when we're going to remove it. The output looks like this
BTRFS warning (device nvme0n1): space cache v1 is being deprecated and will be removed in a future release, please use -o space_cache=v2
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the buffered write path, the dirty page owns the qgroup reserve until
it creates an ordered_extent.
Therefore, any errors that occur before the ordered_extent is created
must free that reservation, or else the space is leaked. The fstest
generic/475 exercises various IO error paths, and is able to trigger
errors in cow_file_range where we fail to get to allocating the ordered
extent. Note that because we *do* clear delalloc, we are likely to
remove the inode from the delalloc list, so the inodes/pages to not have
invalidate/launder called on them in the commit abort path.
This results in failures at the unmount stage of the test that look like:
BTRFS: error (device dm-8 state EA) in cleanup_transaction:2018: errno=-5 IO failure
BTRFS: error (device dm-8 state EA) in btrfs_replace_file_extents:2416: errno=-5 IO failure
BTRFS warning (device dm-8 state EA): qgroup 0/5 has unreleased space, type 0 rsv 28672
------------[ cut here ]------------
WARNING: CPU: 3 PID: 22588 at fs/btrfs/disk-io.c:4333 close_ctree+0x222/0x4d0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c xor zstd_compress raid6_pq
CPU: 3 PID: 22588 Comm: umount Kdump: loaded Tainted: G W 6.10.0-rc7-gab56fde445b8 #21
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:close_ctree+0x222/0x4d0 [btrfs]
RSP: 0018:ffffb4465283be00 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffffa1a1818e1000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffb4465283bbe0 RDI: ffffa1a19374fcb8
RBP: ffffa1a1818e13c0 R08: 0000000100028b16 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000003 R12: ffffa1a18ad7972c
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f9168312b80(0000) GS:ffffa1a4afcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91683c9140 CR3: 000000010acaa000 CR4: 00000000000006f0
Call Trace:
<TASK>
? close_ctree+0x222/0x4d0 [btrfs]
? __warn.cold+0x8e/0xea
? close_ctree+0x222/0x4d0 [btrfs]
? report_bug+0xff/0x140
? handle_bug+0x3b/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? close_ctree+0x222/0x4d0 [btrfs]
generic_shutdown_super+0x70/0x160
kill_anon_super+0x11/0x40
btrfs_kill_super+0x11/0x20 [btrfs]
deactivate_locked_super+0x2e/0xa0
cleanup_mnt+0xb5/0x150
task_work_run+0x57/0x80
syscall_exit_to_user_mode+0x121/0x130
do_syscall_64+0xab/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f916847a887
---[ end trace 0000000000000000 ]---
BTRFS error (device dm-8 state EA): qgroup reserved space leaked
Cases 2 and 3 in the out_reserve path both pertain to this type of leak
and must free the reserved qgroup data. Because it is already an error
path, I opted not to handle the possible errors in
btrfs_free_qgroup_data.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
In the buffered write path, dirty pages can be said to "own" the qgroup
reservation until they create an ordered_extent. It is possible for
there to be outstanding dirty pages when a transaction is aborted, in
which case there is no cancellation path for freeing this reservation
and it is leaked.
We do already walk the list of outstanding delalloc inodes in
btrfs_destroy_delalloc_inodes() and call invalidate_inode_pages2() on them.
This does *not* call btrfs_invalidate_folio(), as one might guess, but
rather calls launder_folio() and release_folio(). Since this is a
reservation associated with dirty pages only, rather than something
associated with the private bit (ordered_extent is cancelled separately
already in the cleanup transaction path), implementing this release
should be done via launder_folio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently sctx->stat.last_physical only got updated in the following
cases:
- When the last stripe of a non-RAID56 chunk is scrubbed
This implies a pitfall, if the last stripe is at the chunk boundary,
and we finished the scrub of the whole chunk, we won't update
last_physical at all until the next chunk.
- When a P/Q stripe of a RAID56 chunk is scrubbed
This leads the following two problems:
- sctx->stat.last_physical is not updated for a almost full chunk
This is especially bad, affecting scrub resume, as the resume would
start from last_physical, causing unnecessary re-scrub.
- "btrfs scrub status" will not report any progress for a long time
Fix the problem by properly updating @last_physical after each stripe is
scrubbed.
And since we're here, for the sake of consistency, use spin lock to
protect the update of @last_physical, just like all the remaining
call sites touching sctx->stat.
Reported-by: Michel Palleau <michel.palleau@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAMFk-+igFTv2E8svg=cQ6o3e6CrR5QwgQ3Ok9EyRaEvvthpqCQ@mail.gmail.com/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there are two locations which need to calculate the real
length of a stripe (which can be at the end of a chunk, and the chunk
size may not always be 64K aligned).
Factor them into a helper as we're going to have a third user soon.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=JdOX
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix regression in extent map rework when handling insertion of
overlapping compressed extent
- fix unexpected file length when appending to a file using direct io
and buffer not faulted in
- in zoned mode, fix accounting of unusable space when flipping
read-only block group back to read-write
- fix page locking when COWing an inline range, assertion failure found
by syzbot
- fix calculation of space info in debugging print
- tree-checker, add validation of data reference item
- fix a few -Wmaybe-uninitialized build warnings
* tag 'for-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize location to fix -Wmaybe-uninitialized in btrfs_lookup_dentry()
btrfs: fix corruption after buffer fault in during direct IO append write
btrfs: zoned: fix zone_unusable accounting on making block group read-write again
btrfs: do not subtract delalloc from avail bytes
btrfs: make cow_file_range_inline() honor locked_page on error
btrfs: fix corrupt read due to bad offset of a compressed extent map
btrfs: tree-checker: validate dref root and objectid
Some arch + compiler combinations report a potentially unused variable
location in btrfs_lookup_dentry(). This is a false alert as the variable
is passed by value and always valid or there's an error. The compilers
cannot probably reason about that although btrfs_inode_by_name() is in
the same file.
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.objectid' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5603:9
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.type' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5674:5
m68k-gcc8/m68k-allmodconfig
mips-gcc8/mips-allmodconfig
powerpc-gcc5/powerpc-all{mod,yes}config
powerpc-gcc5/ppc64_defconfig
Initialize it to zero, this should fix the warnings and won't change the
behaviour as btrfs_inode_by_name() accepts only a root or inode item
types, otherwise returns an error.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/linux-btrfs/bd4e9928-17b3-9257-8ba7-6b7f9bbb639a@linux-m68k.org/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During an append (O_APPEND write flag) direct IO write if the input buffer
was not previously faulted in, we can corrupt the file in a way that the
final size is unexpected and it includes an unexpected hole.
The problem happens like this:
1) We have an empty file, with size 0, for example;
2) We do an O_APPEND direct IO with a length of 4096 bytes and the input
buffer is not currently faulted in;
3) We enter btrfs_direct_write(), lock the inode and call
generic_write_checks(), which calls generic_write_checks_count(), and
that function sets the iocb position to 0 with the following code:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
4) We call btrfs_dio_write() and enter into iomap, which will end up
calling btrfs_dio_iomap_begin() and that calls
btrfs_get_blocks_direct_write(), where we update the i_size of the
inode to 4096 bytes;
5) After btrfs_dio_iomap_begin() returns, iomap will attempt to access
the page of the write input buffer (at iomap_dio_bio_iter(), with a
call to bio_iov_iter_get_pages()) and fail with -EFAULT, which gets
returned to btrfs at btrfs_direct_write() via btrfs_dio_write();
6) At btrfs_direct_write() we get the -EFAULT error, unlock the inode,
fault in the write buffer and then goto to the label 'relock';
7) We lock again the inode, do all the necessary checks again and call
again generic_write_checks(), which calls generic_write_checks_count()
again, and there we set the iocb's position to 4K, which is the current
i_size of the inode, with the following code pointed above:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
8) Then we go again to btrfs_dio_write() and enter iomap and the write
succeeds, but it wrote to the file range [4K, 8K), leaving a hole in
the [0, 4K) range and an i_size of 8K, which goes against the
expectations of having the data written to the range [0, 4K) and get an
i_size of 4K.
Fix this by not unlocking the inode before faulting in the input buffer,
in case we get -EFAULT or an incomplete write, and not jumping to the
'relock' label after faulting in the buffer - instead jump to a location
immediately before calling iomap, skipping all the write checks and
relocking. This solves this problem and it's fine even in case the input
buffer is memory mapped to the same file range, since only holding the
range locked in the inode's io tree can cause a deadlock, it's safe to
keep the inode lock (VFS lock), as was fixed and described in commit
51bd9563b6 ("btrfs: fix deadlock due to page faults during direct IO
reads and writes").
A sample reproducer provided by a reporter is the following:
$ cat test.c
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <fcntl.h>
#include <stdio.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
if (argc < 2) {
fprintf(stderr, "Usage: %s <test file>\n", argv[0]);
return 1;
}
int fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT |
O_APPEND, 0644);
if (fd < 0) {
perror("creating test file");
return 1;
}
char *buf = mmap(NULL, 4096, PROT_READ,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ssize_t ret = write(fd, buf, 4096);
if (ret < 0) {
perror("pwritev2");
return 1;
}
struct stat stbuf;
ret = fstat(fd, &stbuf);
if (ret < 0) {
perror("stat");
return 1;
}
printf("size: %llu\n", (unsigned long long)stbuf.st_size);
return stbuf.st_size == 4096 ? 0 : 1;
}
A test case for fstests will be sent soon.
Reported-by: Hanna Czenczek <hreitz@redhat.com>
Link: https://lore.kernel.org/linux-btrfs/0b841d46-12fe-4e64-9abb-871d8d0de271@redhat.com/
Fixes: 8184620ae2 ("btrfs: fix lost file sync on direct IO write with nowait and dsync iocb")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs makes a block group read-only, it adds all free regions in the
block group to space_info->bytes_readonly. That free space excludes
reserved and pinned regions. OTOH, when btrfs makes the block group
read-write again, it moves all the unused regions into the block group's
zone_unusable. That unused region includes reserved and pinned regions.
As a result, it counts too much zone_unusable bytes.
Fortunately (or unfortunately), having erroneous zone_unusable does not
affect the calculation of space_info->bytes_readonly, because free
space (num_bytes in btrfs_dec_block_group_ro) calculation is done based on
the erroneous zone_unusable and it reduces the num_bytes just to cancel the
error.
This behavior can be easily discovered by adding a WARN_ON to check e.g,
"bg->pinned > 0" in btrfs_dec_block_group_ro(), and running fstests test
case like btrfs/282.
Fix it by properly considering pinned and reserved in
btrfs_dec_block_group_ro(). Also, add a WARN_ON and introduce
btrfs_space_info_update_bytes_zone_unusable() to catch a similar mistake.
Fixes: 169e0da91a ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The block group's avail bytes printed when dumping a space info subtract
the delalloc_bytes. However, as shown in btrfs_add_reserved_bytes() and
btrfs_free_reserved_bytes(), it is added or subtracted along with
"reserved" for the delalloc case, which means the "delalloc_bytes" is a
part of the "reserved" bytes. So, excluding it to calculate the avail space
counts delalloc_bytes twice, which can lead to an invalid result.
Fixes: e50b122b83 ("btrfs: print available space for a block group when dumping a space info")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs buffered write path runs through __extent_writepage() which
has some tricky return value handling for writepage_delalloc().
Specifically, when that returns 1, we exit, but for other return values
we continue and end up calling btrfs_folio_end_all_writers(). If the
folio has been unlocked (note that we check the PageLocked bit at the
start of __extent_writepage()), this results in an assert panic like
this one from syzbot:
BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure
BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction.
BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure
assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871
------------[ cut here ]------------
kernel BUG at fs/btrfs/subpage.c:871!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted
6.10.0-syzkaller-05505-gb1bc554e009e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 06/27/2024
RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871
Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d
0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8
6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89
RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246
RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc
R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001
R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80
FS: 0000000000000000(0000) GS:ffff8880b9500000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__extent_writepage fs/btrfs/extent_io.c:1597 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline]
btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373
do_writepages+0x359/0x870 mm/page-writeback.c:2656
filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397
__filemap_fdatawrite_range mm/filemap.c:430 [inline]
__filemap_fdatawrite mm/filemap.c:436 [inline]
filemap_flush+0xdf/0x130 mm/filemap.c:463
btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:222
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xa2f/0x27f0 kernel/exit.c:877
do_group_exit+0x207/0x2c0 kernel/exit.c:1026
__do_sys_exit_group kernel/exit.c:1037 [inline]
__se_sys_exit_group kernel/exit.c:1035 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035
x64_sys_call+0x2634/0x2640
arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f075b70c9
Code: Unable to access opcode bytes at
0x7f5f075b709f.
I was hitting the same issue by doing hundreds of accelerated runs of
generic/475, which also hits IO errors by design.
I instrumented that reproducer with bpftrace and found that the
undesirable folio_unlock was coming from the following callstack:
folio_unlock+5
__process_pages_contig+475
cow_file_range_inline.constprop.0+230
cow_file_range+803
btrfs_run_delalloc_range+566
writepage_delalloc+332
__extent_writepage # inlined in my stacktrace, but I added it here
extent_write_cache_pages+622
Looking at the bisected-to patch in the syzbot report, Josef realized
that the logic of the cow_file_range_inline error path subtly changing.
In the past, on error, it jumped to out_unlock in cow_file_range(),
which honors the locked_page, so when we ultimately call
folio_end_all_writers(), the folio of interest is still locked. After
the change, we always unlocked ignoring the locked_page, on both success
and error. On the success path, this all results in returning 1 to
__extent_writepage(), which skips the folio_end_all_writers() call,
which makes it OK to have unlocked.
Fix the bug by wiring the locked_page into cow_file_range_inline() and
only setting locked_page to NULL on success.
Reported-by: syzbot+a14d8ac9af3a2a4fd0c8@syzkaller.appspotmail.com
Fixes: 0586d0a89e ("btrfs: move extent bit and page cleanup into cow_file_range_inline")
CC: stable@vger.kernel.org # 6.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
We only had a couple of array[] declarations, and changing them to just
use 'MAX()' instead of 'max()' fixes the issue.
This will allow us to simplify our min/max macros enormously, since they
can now unconditionally use temporary variables to avoid using the
argument values multiple times.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we attempt to insert a compressed extent map that has a range that
overlaps another extent map we have in the inode's extent map tree, we
can end up with an incorrect offset after adjusting the new extent map at
merge_extent_mapping() because we don't update the extent map's offset.
For example consider the following scenario:
1) We have a file extent item for a compressed extent covering the file
range [108K, 144K) and currently there's no corresponding extent map
in the inode's extent map tree;
2) The inode's size is 141K;
3) We have an encoded write (compressed) into the file range [120K, 128K),
which overlaps the existing file extent item. The encoded write creates
a matching extent map, adds it to the inode's extent map tree and
creates an ordered extent for it.
Note that the corresponding file extent item is added to the subvolume
tree only when the ordered extent completes (when executing
btrfs_finish_one_ordered());
4) We have a write into the file range [160K, 164K).
This writes increases the i_size of the file, and there's a hole
between the current i_size (141K) and the start offset of this write,
and since the old i_size is in the middle of the block [140K, 144K),
we have to write zeroes to the range [141K, 144K) (3072 bytes) and
therefore dirty that page.
We then call btrfs_set_extent_delalloc() with a start offset of 140K.
We then end up at btrfs_find_new_delalloc_bytes() which will call
btrfs_get_extent() for the range [140K, 144K);
5) The btrfs_get_extent() doesn't find any extent map in the inode's
extent map tree covering the range [140K, 144K), so it searches the
subvolume tree for any file extent items covering that range.
There it finds the file extent item for the range [108K, 144K),
creates a compressed extent map for that range and then calls
btrfs_add_extent_mapping() with that extent map and passes the
range [140K, 144K) via the "start" and "len" parameters;
6) The call to add_extent_mapping() done by btrfs_add_extent_mapping()
fails with -EEXIST because there's an extent map, created at step 2
for the [120K, 128K) range, that covers that overlaps with the range
of the given extent map ([108K, 144K)).
Then it does a lookup for extent map from step 2 add calls
merge_extent_mapping() to adjust the input extent map ([108K, 144K)).
That adjust the extent map to a start offset of 128K and a length
of 16K (starting just after the extent map from step 2), but it does
not update the offset field of the extent map, leaving it with a value
of zero instead of updating to a value of 20K (128K - 108K = 20K).
As a result any read for the range [128K, 144K) can return
incorrect data since we read from a wrong section of the extent (unless
both the correct and incorrect ranges happen to have the same data).
So fix this by changing merge_extent_mapping() to update the extent map's
offset even if it's compressed. Also add a test case to the self tests.
This didn't happen before the patchset that does big changes in the extent
map structure (which includes the commit in the Fixes tag below) because
we kept track of the original start offset in the extent map (member
"orig_start") so we could always calculate the correct offset by
subtracting that offset from the start offset.
A test case for fstests that triggered this problem using send/receive
with compressed writes will be added soon.
Fixes: 3d2ac99224 ("btrfs: introduce new members for extent_map")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[CORRUPTION]
There is a bug report that btrfs flips RO due to a corruption in the
extent tree, the involved dumps looks like this:
item 188 key (402811572224 168 4096) itemoff 14598 itemsize 79
extent refs 3 gen 3678544 flags 1
ref#0: extent data backref root 13835058055282163977 objectid 281473384125923 offset 81432576 count 1
ref#1: shared data backref parent 1947073626112 count 1
ref#2: shared data backref parent 1156030103552 count 1
BTRFS critical (device vdc1: state EA): unable to find ref byte nr 402811572224 parent 0 root 265 owner 28703026 offset 81432576 slot 189
BTRFS error (device vdc1: state EA): failed to run delayed ref for logical 402811572224 num_bytes 4096 type 178 action 2 ref_mod 1: -2
[CAUSE]
The corrupted entry is ref#0 of item 188.
The root number 13835058055282163977 is beyond the upper limit for root
items (the current limit is 1 << 48), and the objectid also looks
suspicious.
Only the offset and count is correct.
[ENHANCEMENT]
Although it's still unknown why we have such many bytes corrupted
randomly, we can still enhance the tree-checker for data backrefs by:
- Validate the root value
For now there should only be 3 types of roots can have data backref:
* subvolume trees
* data reloc trees
* root tree
Only for v1 space cache
- validate the objectid value
The objectid should be a valid inode number.
Hopefully we can catch such problem in the future with the new checkers.
Reported-by: Kai Krakow <hurikhan77@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAMthOuPjg5RDT-G_LXeBBUUtzt3cq=JywF+D1_h+JYxe=WKp-Q@mail.gmail.com/#t
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
walkers") is known to cause a performance regression
(https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff).
Yu has a fix which I'll send along later via the hotfixes branch.
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability of
cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of the
zeropage in MAP_SHARED mappings. I don't see any runtime effects here -
more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of
higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the
series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has
simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Is anyone reading this stuff? If so, email me!
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large folio
userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's self
testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are
"mm: memcg: separate legacy cgroup v1 code and put under config
option" and
"mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of excessive
correctable memory errors. In order to permit userspace to monitor and
handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from migrate
folio" teaches the kernel to appropriately handle migration from
poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare
refcount increments. So these paes can first be moved aside if they
reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps
for much faster reading of vma information. The series is "query VMAs
from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance Yang
improves the kernel's presentation of developer information related to
multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and not
very useful feature from slab fault injection.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA
joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3
xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8=
=z0Lf
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
-----BEGIN PGP SIGNATURE-----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=ROO7
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix for build breakage on 32bit platforms"
* tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: change BTRFS_MOUNT_* flags to 64bit type
Currently the BTRFS_MOUNT_* flags are already beyond 32 bits, this is
going to cause compilation errors for some 32 bit systems, as their
unsigned long is only 32 bits long, thus flag
BTRFS_MOUNT_IGNORESUPERFLAGS overflows and can lead to errors.
Fix the problem by:
- Migrate all existing BTRFS_MOUNT_* flags to unsigned long long
- Migrate all mount option related variables to unsigned long long
* btrfs_fs_info::mount_opt
* btrfs_fs_context::mount_opt
* mount_opt parameter of btrfs_check_options()
* old_opts parameter of btrfs_remount_begin()
* old_opts parameter of btrfs_remount_cleanup()
* mount_opt parameter of btrfs_check_mountopts_zoned()
* mount_opt and opt parameters of check_ro_option()
Fixes: 32e6216512 ("btrfs: introduce new "rescue=ignoresuperflags" mount option")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=k5d3
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The highlights are new logic behind background block group reclaim,
automatic removal of qgroup after removing a subvolume and new
'rescue=' mount options.
The rest is optimizations, cleanups and refactoring.
User visible features:
- dynamic block group reclaim:
- tunable framework to avoid situations where eager data
allocations prevent creating new metadata chunks due to lack of
unallocated space
- reuse sysfs knob bg_reclaim_threshold (otherwise used only in
zoned mode) for a fixed value threshold
- new on/off sysfs knob "dynamic_reclaim" calculating the value
based on heuristics, aiming to keep spare working space for
relocating chunks but not to needlessly relocate partially
utilized block groups or reclaim newly allocated ones
- stats are exported in sysfs per block group type, files
"reclaim_*"
- this may increase IO load at unexpected times but the corner
case of no allocatable block groups is known to be worse
- automatically remove qgroup of deleted subvolumes:
- adjust qgroup removal conditions, make sure all related
subvolume data are already removed, or return EBUSY, also take
into account setting of sysfs drop_subtree_threshold
- also works in squota mode
- mount option updates: new modes of 'rescue=' that allow to mount
images (read-only) that could have been partially converted by user
space tools
- ignoremetacsums - invalid metadata checksums are ignored
- ignoresuperflags - super block flags that track conversion in
progress (like UUID or checksums)
Core:
- size of struct btrfs_inode is now below 1024 (on a release config),
improved memory packing and other secondary effects
- switch tracking of open inodes from rb-tree to xarray, minor
performance improvement
- reduce number of empty transaction commits when there are no dirty
data/metadata
- memory allocation optimizations (reduced numbers, reordering out of
critical sections)
- extent map structure optimizations and refactoring, more sanity
checks
- more subpage in zoned mode preparations or fixes
- general snapshot code cleanups, improvements and documentation
- tree-checker updates: more file extent ram_bytes fixes, continued
- raid-stripe-tree update (not backward compatible):
- remove extent encoding field from the structure, can be inferred
from other information
- requires btrfs-progs 6.9.1 or newer
- cleanups and refactoring
- error message updates
- error handling improvements
- return type and parameter cleanups and improvements"
* tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (152 commits)
btrfs: fix extent map use-after-free when adding pages to compressed bio
btrfs: fix bitmap leak when loading free space cache on duplicate entry
btrfs: remove the BUG_ON() inside extent_range_clear_dirty_for_io()
btrfs: move extent_range_clear_dirty_for_io() into inode.c
btrfs: enhance compression error messages
btrfs: fix data race when accessing the last_trans field of a root
btrfs: rename the extra_gfp parameter of btrfs_alloc_page_array()
btrfs: remove the extra_gfp parameter from btrfs_alloc_folio_array()
btrfs: introduce new "rescue=ignoresuperflags" mount option
btrfs: introduce new "rescue=ignoremetacsums" mount option
btrfs: output the unrecognized super block flags as hex
btrfs: remove unused Opt enums
btrfs: tree-checker: add extra ram_bytes and disk_num_bytes check
btrfs: fix the ram_bytes assignment for truncated ordered extents
btrfs: make validate_extent_map() catch ram_bytes mismatch
btrfs: ignore incorrect btrfs_file_extent_item::ram_bytes
btrfs: cleanup the bytenr usage inside btrfs_extent_item_to_extent_map()
btrfs: fix typo in error message in btrfs_validate_super()
btrfs: move the direct IO code into its own file
btrfs: pass a btrfs_inode to btrfs_set_prop()
...
-----BEGIN PGP SIGNATURE-----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=wVi8
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZpEG2wAKCRCRxhvAZXjc
ooW/AQDzyY+xNGt4OPMvlyFUHd5RcyiLsMhYrkKc3FaIFjesVgD+PFW5PPW12c0V
Z4VHg9w1HDDuUn4XvELs7OXZpek7RgU=
=eDC8
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode / dentry updates from Christian Brauner:
"This contains smaller performance improvements to inodes and dentries:
inode:
- Add rcu based inode lookup variants.
They avoid one inode hash lock acquire in the common case thereby
significantly reducing contention. We already support RCU-based
operations but didn't take advantage of them during inode
insertion.
Callers of iget_locked() get the improvement without any code
changes. Callers that need a custom callback can switch to
iget5_locked_rcu() as e.g., did btrfs.
With 20 threads each walking a dedicated 1000 dirs * 1000 files
directory tree to stat(2) on a 32 core + 24GB ram vm:
before: 3.54s user 892.30s system 1966% cpu 45.549 total
after: 3.28s user 738.66s system 1955% cpu 37.932 total (-16.7%)
Long-term we should pick up the effort to introduce more
fine-grained locking and possibly improve on the currently used
hash implementation.
- Start zeroing i_state in inode_init_always() instead of doing it in
individual filesystems.
This allows us to remove an unneeded lock acquire in new_inode()
and not burden individual filesystems with this.
dcache:
- Move d_lockref out of the area used by RCU lookup to avoid
cacheline ping poing because the embedded name is sharing a
cacheline with d_lockref.
- Fix dentry size on 32bit with CONFIG_SMP=y so it does actually end
up with 128 bytes in total"
* tag 'vfs-6.11.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: fix dentry size
vfs: move d_lockref out of the area used by RCU lookup
bcachefs: remove now spurious i_state initialization
xfs: remove now spurious i_state initialization in xfs_inode_alloc
vfs: partially sanitize i_state zeroing on inode creation
xfs: preserve i_state around inode_init_always in xfs_reinit_inode
btrfs: use iget5_locked_rcu
vfs: add rcu-based find_inode variants for iget ops
-----BEGIN PGP SIGNATURE-----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=gtsF
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fix a regression in extent map shrinker behaviour.
In the past weeks we got reports from users that there are huge
latency spikes or freezes. This was bisected to newly added shrinker
of extent maps (it was added to fix a build up of the structures in
memory).
I'm assuming that the freezes would happen to many users after release
so I'd like to get it merged now so it's in 6.10. Although the diff
size is not small the changes are relatively straightforward, the
reporters verified the fixes and we did testing on our side.
The fixes:
- adjust behaviour under memory pressure and check lock or scheduling
conditions, bail out if needed
- synchronize tracking of the scanning progress so inode ranges are
not skipped or work duplicated
- do a delayed iput when scanning a root so evicting an inode does
not slow things down in case of lots of dirty data, also fix
lockdep warning, a deadlock could happen when writing the dirty
data would need to start a transaction"
* tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid races when tracking progress for extent map shrinking
btrfs: stop extent map shrinker if reschedule is needed
btrfs: use delayed iput during extent map shrinking
We store the progress (root and inode numbers) of the extent map shrinker
in fs_info without any synchronization but we can have multiple tasks
calling into the shrinker during memory allocations when there's enough
memory pressure for example.
This can result in a task A reading fs_info->extent_map_shrinker_last_ino
after another task B updates it, and task A reading
fs_info->extent_map_shrinker_last_root before task B updates it, making
task A see an odd state that isn't necessarily harmful but may make it
skip certain inode ranges or do more work than necessary by going over
the same inodes again. These unprotected accesses would also trigger
warnings from tools like KCSAN.
So add a lock to protect access to these progress fields.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent map shrinker can be called in a variety of contexts where we
are under memory pressure, and of them is when a task is trying to
allocate memory. For this reason the shrinker is typically called with a
value of struct shrink_control::nr_to_scan that is much smaller than what
we return in the nr_cached_objects callback of struct super_operations
(fs/btrfs/super.c:btrfs_nr_cached_objects()), so that the shrinker does
not take a long time and cause high latencies. However we can still take
a lot of time in the shrinker even for a limited amount of nr_to_scan:
1) When traversing the red black tree that tracks open inodes in a root,
as for example with millions of open inodes we get a deep tree which
takes time searching for an inode;
2) Iterating over the extent map tree, which is a red black tree, of an
inode when doing the rb_next() calls and when removing an extent map
from the tree, since often that requires rebalancing the red black
tree;
3) When trying to write lock an inode's extent map tree we may wait for a
significant amount of time, because there's either another task about
to do IO and searching for an extent map in the tree or inserting an
extent map in the tree, and we can have thousands or even millions of
extent maps for an inode. Furthermore, there can be concurrent calls
to the shrinker so the lock might be busy simply because there is
already another task shrinking extent maps for the same inode;
4) We often reschedule if we need to, which further increases latency.
So improve on this by stopping the extent map shrinking code whenever we
need to reschedule and make it skip an inode if we can't immediately lock
its extent map tree.
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reported-by: Andrea Gelmini <andrea.gelmini@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CABXGCsMmmb36ym8hVNGTiU8yfUS_cGvoUmGCcBrGWq9OxTrs+A@mail.gmail.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we failed to link a free space entry because there's already a
conflicting entry for the same offset, we free the free space entry but
we don't free the associated bitmap that we had just allocated before.
Fix that by freeing the bitmap before freeing the entry.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously we had a BUG_ON() inside extent_range_clear_dirty_for_io(), as
we expected all involved folios to be still locked, thus no folio should be
missing.
However for extent_range_clear_dirty_for_io() itself, we can skip the
missing folio and handle the remaining ones, and return an error if
there is anything wrong.
Remove the BUG_ON() and let the caller to handle the error.
In the caller we do not have a quick way to cleanup the error, but all
the compression routines would handle the missing folio as an error and
properly error out, so we only need to do an ASSERT() for developers,
while for non-debug build the compression routine would handle the
error correctly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is only used inside inode.c by compress_file_range(),
so move it to inode.c and unexport it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add more verbose and specific messages to all main error points in
compression code for all algorithms. Currently there's no way to know
which inode is affected or where in the data errors happened.
The messages follow a common format:
- what happened
- error code if relevant
- root and inode
- additional data like offsets or lengths
There's no helper for the messages as they differ in some details and
that would be cumbersome to generalize to a single function. As all the
errors are "almost never happens" there are the unlikely annotations
done as compression is hot path.
Signed-off-by: David Sterba <dsterba@suse.com>
KCSAN complains about a data race when accessing the last_trans field of a
root:
[ 199.553628] BUG: KCSAN: data-race in btrfs_record_root_in_trans [btrfs] / record_root_in_trans [btrfs]
[ 199.555186] read to 0x000000008801e308 of 8 bytes by task 2812 on cpu 1:
[ 199.555210] btrfs_record_root_in_trans+0x9a/0x128 [btrfs]
[ 199.555999] start_transaction+0x154/0xcd8 [btrfs]
[ 199.556780] btrfs_join_transaction+0x44/0x60 [btrfs]
[ 199.557559] btrfs_dirty_inode+0x9c/0x140 [btrfs]
[ 199.558339] btrfs_update_time+0x8c/0xb0 [btrfs]
[ 199.559123] touch_atime+0x16c/0x1e0
[ 199.559151] pipe_read+0x6a8/0x7d0
[ 199.559179] vfs_read+0x466/0x498
[ 199.559204] ksys_read+0x108/0x150
[ 199.559230] __s390x_sys_read+0x68/0x88
[ 199.559257] do_syscall+0x1c6/0x210
[ 199.559286] __do_syscall+0xc8/0xf0
[ 199.559318] system_call+0x70/0x98
[ 199.559431] write to 0x000000008801e308 of 8 bytes by task 2808 on cpu 0:
[ 199.559464] record_root_in_trans+0x196/0x228 [btrfs]
[ 199.560236] btrfs_record_root_in_trans+0xfe/0x128 [btrfs]
[ 199.561097] start_transaction+0x154/0xcd8 [btrfs]
[ 199.561927] btrfs_join_transaction+0x44/0x60 [btrfs]
[ 199.562700] btrfs_dirty_inode+0x9c/0x140 [btrfs]
[ 199.563493] btrfs_update_time+0x8c/0xb0 [btrfs]
[ 199.564277] file_update_time+0xb8/0xf0
[ 199.564301] pipe_write+0x8ac/0xab8
[ 199.564326] vfs_write+0x33c/0x588
[ 199.564349] ksys_write+0x108/0x150
[ 199.564372] __s390x_sys_write+0x68/0x88
[ 199.564397] do_syscall+0x1c6/0x210
[ 199.564424] __do_syscall+0xc8/0xf0
[ 199.564452] system_call+0x70/0x98
This is because we update and read last_trans concurrently without any
type of synchronization. This should be generally harmless and in the
worst case it can make us do extra locking (btrfs_record_root_in_trans())
trigger some warnings at ctree.c or do extra work during relocation - this
would probably only happen in case of load or store tearing.
So fix this by always reading and updating the field using READ_ONCE()
and WRITE_ONCE(), this silences KCSAN and prevents load and store tearing.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is only one caller utilizing the @extra_gfp parameter,
alloc_eb_folio_array(). And in that case the extra_gfp is only assigned
to __GFP_NOFAIL.
Rename the @extra_gfp parameter to @nofail to indicate that.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_alloc_folio_array() is only utilized in
btrfs_submit_compressed_read() and no other location, and the only
caller is not utilizing the @extra_gfp parameter.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new mount option allows the kernel to skip the super flags check,
it's mostly to allow the kernel to do a rescue mount of an interrupted
checksum conversion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce "rescue=ignoremetacsums" to ignore metadata csums, all the
other metadata sanity checks are still kept as is.
This new mount option is mostly to allow the kernel to mount an
interrupted checksum conversion (at the metadata csum overwrite stage).
And since the main part of metadata sanity checks is inside
tree-checker, we shouldn't lose much safety, and the new mount option is
rescue mount option it requires full read-only mount.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Most of the extra super block flags are beyond 32bits (from
CHANGING_FSID_V2 to CHANGING_*_CSUMS), thus using %llu is not only too
long and pretty hard to read.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following three Opt_* enums haven't been utilized since the port to
new mount API:
- Opt_ignorebadroots
- Opt_ignoredatacsums
- Opt_rescue_all
All those enums are from the old day where we have dedicated mount
options, nowadays they have been moved to "rescue=" mount option
groups, and no more global tokens for them.
So we can safely remove them now.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is to ensure non-compressed file extents (both regular and
prealloc) should have matching ram_bytes and disk_num_bytes.
This is only for CONFIG_BTRFS_DEBUG and CONFIG_BTRFS_ASSERT case,
furthermore this will not return error, but just a kernel warning to
inform developers.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[HICCUP]
After adding extra checks on btrfs_file_extent_item::ram_bytes to
tree-checker, running fsstress leads to tree-checker warning at write time,
as we created file extent items with an invalid ram_bytes.
All those offending file extents have offset 0, and ram_bytes matching
num_bytes, and smaller than disk_num_bytes.
This would also trigger the recently enhanced btrfs-check, which catches
such mismatches and report them as minor errors.
[CAUSE]
When a folio/page is invalidated and it is part of a submitted OE, we
mark the OE truncated just to the beginning of the folio/page.
And for truncated OE, we insert the file extent item with incorrect
value for ram_bytes (using num_bytes instead of the usual value).
This is not a big deal for end users, as we do not utilize the ram_bytes
field for regular non-compressed extents.
This mismatch is just a small violation against on-disk format.
[FIX]
Fix it by removing the override on btrfs_file_extent_item::ram_bytes.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously validate_extent_map() is only to catch bugs related to
extent_map member cleanups.
But with recent btrfs-check enhancement to catch ram_bytes mismatch with
disk_num_bytes, it would be much better to catch such extent maps
earlier.
So this patch adds extra ram_bytes validation for extent maps.
Please note that, older filesystems with such mismatch won't trigger this error:
- extent_map::ram_bytes is already fixed
Previous patch has already fixed the ram_bytes for affected file
extents.
So this enhanced sanity check should not affect end users.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[HICCUP]
Kernels can create file extent items with incorrect ram_bytes like this:
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 13631488 nr 32768
extent data offset 0 nr 4096 ram 4096
extent compression 0 (none)
Thankfully kernel can handle them properly, as in that case ram_bytes is
not utilized at all.
[ENHANCEMENT]
Since the hiccup is not going to cause any data-loss and is only a minor
violation of on-disk format, here we only need to ignore the incorrect
ram_bytes value, and use the correct one from
btrfs_file_extent_item::disk_num_bytes.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[HICCUP]
Before commit 85de2be7129c ("btrfs: remove extent_map::block_start
member"), we utilized @bytenr variable inside
btrfs_extent_item_to_extent_map() to calculate block_start.
But that commit removed block_start completely, we have no need to
advance @bytenr at all.
[ENHANCEMENT]
- Rename @bytenr as @disk_bytenr
- Only declare @disk_bytenr inside the if branch
- Make @disk_bytenr const and remove the modification on it
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a typo in an error message when checking the block group tree
feature, it mentions fres-space-tree instead of free-space-tree. Fix
that.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The direct IO code is over a thousand lines and it's currently spread
between file.c and inode.c, which makes it not easy to locate some parts
of it sometimes. Also inode.c is about 11 thousand lines and file.c about
4 thousand lines, both too big. So move all the direct IO code into a
dedicated file, so that it's easy to locate all its code and reduce the
sizes of inode.c and file.c.
This is a pure move of code without any other changes except export a
a couple functions from inode.c (get_extent_allocation_hint() and
create_io_em()) because they are used in inode.c and the new direct-io.c
file, and a couple functions from file.c (btrfs_buffered_write() and
btrfs_write_check()) because they are used both in file.c and in the new
direct-io.c file.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to btrfs_set_prop() as it's an
internal interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to btrfs_compress_heuristic() as it's an
internal interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The structure is internal so we should use struct btrfs_inode for that,
allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The structure is internal so we should use struct btrfs_inode for that.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to btrfs_ioctl_send() and _btrfs_ioctl_send()
as it's an internal interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
The structure is internal so we should use struct btrfs_inode for that.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to is_data_inode() as it's an
internal interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to btrfs_readdir_get_delayed_items() as it's
an internal interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct btrfs_inode to btrfs_readdir_put_delayed_items() as it's
an internal interface, allowing to remove some use of BTRFS_I.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove the encoding field from 'struct btrfs_stripe_extent'. It was
originally intended to encode the RAID type as well as if we're a data
or a parity stripe.
But the RAID type can be inferred form the block-group and the data vs.
parity differentiation can be done easier with adding a new key type
for parity stripes in the RAID stripe tree.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When debugging the recent ram_bytes mismatch bug, I can hit it with
enhanced tree-checker for file extent items at write time.
But the bug is not that easy to trigger (mostly triggered with
btrfs/06*, which uses 20 threads fsstress), and when I hit it, the only
info is the kernel leaf dump, but it doesn't include things like the
file extent type (REGULAR or PREALLOC).
Add the dump for generation and type (although only numeric output) to
make debugging a little easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Periodic reclaim attempts to avoid block_groups seeing active use with a
sweep mark that gets cleared on allocation and set on a sweep. In urgent
conditions where we have very little unallocated space (less than one
chunk used by the threshold calculation for the unallocated target), we
want to be able to override this mechanism.
Introduce a second pass that only happens if we fail to find a reclaim
candidate and reclaim is urgent. In that case, do a second pass where
all block groups are eligible.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Periodic reclaim runs the risk of getting stuck in a state where it
keeps reclaiming the same block group over and over. This can happen if
1. reclaiming that block_group fails
2. reclaiming that block_group fails to move any extents into existing
block_groups and just allocates a fresh chunk and moves everything.
Currently, 1. is a very tight loop inside the reclaim worker. That is
critical for edge triggered reclaim or else we risk forgetting about a
reclaimable group. On the other hand, with level triggered reclaim we
can break out of that loop and get it later.
With that fixed, 2. applies to both failures and "successes" with no
progress. If we have done a periodic reclaim on a space_info and nothing
has changed in that space_info, there is not much point to trying again,
so don't, until enough space gets free, which we capture with a
heuristic of needing to net free 1 chunk.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently employ a edge-triggered block group reclaim strategy which
marks block groups for reclaim as they free down past a threshold.
With a dynamic threshold, this is worse than doing it in a
level-triggered fashion periodically. That is because the reclaim
itself happens periodically, so the threshold at that point in time is
what really matters, not the threshold at freeing time. If we mark the
reclaim in a big pass, then sort by usage and do reclaim, we also
benefit from a negative feedback loop preventing unnecessary reclaims as
we crunch through the "best" candidates.
Since this is quite a different model, it requires some additional
support. The edge triggered reclaim has a good heuristic for not
reclaiming fresh block groups, so we need to replace that with a typical
GC sweep mark which skips block groups that have seen an allocation
since the last sweep.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
We can currently recover allocated block_groups by:
- explicitly starting balance operations
- "auto reclaim" via bg_reclaim_threshold
The latter works by checking against a fixed threshold on frees. If we
pass from above the threshold to below, relocation triggers and the
block group will get reclaimed by the cleaner thread (assuming it is
still eligible)
Picking a threshold is challenging. Too high, and you end up trying to
reclaim very full block_groups which is quite costly, and you don't do
reclaim on block_groups that don't get quite THAT full, but could still
be quite fragmented and stranding a lot of space. Too low, and you
similarly miss out on reclaim even if you badly need it to avoid running
out of unallocated space, if you have heavily fragmented block groups
living above the threshold.
No matter the threshold, it suffers from a workload that happens to
bounce around that threshold, which can introduce arbitrary amounts of
reclaim waste.
To improve this situation, introduce a dynamic threshold. The basic idea
behind this threshold is that it should be very lax when there is plenty
of unallocated space, and increasingly aggressive as we approach zero
unallocated space. To that end, it sets a target for unallocated space
(10 chunks) and then linearly increases the threshold as the amount of
space short of the target we are increases. The formula is:
(target - unalloc) / target
I tested this by running it on three interesting workloads:
1. bounce allocations around X% full.
2. fill up all the way and introduce full fragmentation.
3. write in a fragmented way until the filesystem is just about full.
1. and 2. attack the weaknesses of a fixed threshold; fixed either works
perfectly or fully falls apart, depending on the threshold. Dynamic
always handles these cases well.
3. attacks dynamic by checking whether it is too zealous to reclaim in
conditions with low unallocated and low unused. It tends to claw back
1GiB of unallocated fairly aggressively, but not much more. Early
versions of dynamic threshold struggled on this test.
Additional work could be done to intelligently ratchet up the urgency of
reclaim in very low unallocated conditions. Existing mechanisms are
already useless in that case anyway.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
This is handy when computing space_info dynamic reclaim thresholds where
we do not have access to a block group. We could add it to the various
functions as a parameter, but it seems reasonable for space_info to have
an fs_info pointer.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When evaluating various reclaim strategies/thresholds against each
other, it is useful to collect data about the amount of reclaim
happening. Expose a count, error count, and byte count via sysfs
per space_info.
Note that this is only for automatic reclaim, not manually invoked
balances or other codepaths that use "relocate_block_group"
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Calling btrfs_handle_fs_error() after btrfs_run_qgroups() fails to
update the qgroup status is probably not necessary, this would turn the
filesystem to read-only. For the same reason aborting the transaction is
also not a good option.
The state is left inconsistent and can be fixed by rescan, printing a
warning should be sufficient. Return code reflects the status of
adding/deleting the relation and if the transaction was ended properly.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a transaction joined in the qgroup relation add/remove ioctl and
any error will lead to abort/error. We could lift the allocation from
btrfs_add_qgroup_relation() and move it outside of the transaction
context. The relation deletion does not need that.
The ownership of the structure is moved to the add relation handler.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The errors during removing a chunk item are fatal, we expect to have a
matching item in the chunk map from which the chunk_offset is taken.
Handle that by transaction abort.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent item used to have a v0 that was removed in 6.6. There's a
check for minimum expected size that could lead to
btrfs_handle_fs_error() that would make the filesystem read-only. As we
don't have v0 anymore (and haven't seen any reports in the deprecation
period), handle this in a less intrusive way.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When an extended ref is deleted we do a sanity check right before
removing the item, if we can't find it then handle the error. This is
done by btrfs_handle_fs_error() but this is from the time before we had
the transaction abort infrastructure, so switch to that. The end result
is the same, the error is reported and switched to read-only. We newly
return the -ENOENT error code as this better represents what happened.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We always allocate a delayed extent op structure when allocating a tree
block (except for log trees), but most of the time we don't need it as
we only need to set the BTRFS_BLOCK_FLAG_FULL_BACKREF if we're dealing
with a relocation tree and we only need to set the key of a tree block
in a btrfs_tree_block_info structure if we are not using skinny metadata
(feature enabled by default since btrfs-progs 3.18 and available as of
kernel 3.10).
In these cases, where we don't need neither to update flags nor to set
the key, we only use the delayed extent op structure to set the tree
block's level. This is a waste of memory and besides that, the memory
allocation can fail and can add additional latency.
Instead of using a delayed extent op structure to store the level of
the tree block, use the delayed ref head to store it. This doesn't
change the size of neither structure and helps us avoid allocating
delayed extent ops structures when using the skinny metadata feature
and there's no relocation going on. This also gets rid of a BUG_ON().
For example, for a fs_mark run, with 5 iterations, 8 threads and 100K
files per iteration, before this patch there were 118109 allocations
of delayed extent op structures and after it there were none.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When qgroups are enabled, during data reservation, we allocate the
ulist_nodes that track the exact reserved extents with GFP_ATOMIC
unconditionally. This is unnecessary, and we can follow the model
already employed by the struct extent_state we preallocate in the non
qgroups case, which should reduce the risk of allocation failures with
GFP_ATOMIC.
Add a prealloc node to struct ulist which ulist_add will grab when it is
present, and try to allocate it before taking the tree lock while we can
still take advantage of a less strict gfp mask. The lifetime of that
node belongs to the new prealloc field, until it is used, at which point
it belongs to the ulist linked list.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of doing a BUG_ON() handle the error by returning -EUCLEAN,
aborting the transaction and logging an error message.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using an if-else statement when processing the extent item at
btrfs_lookup_extent_info(), use a single if statement for the error case
since it does a goto at the end and leave the success (expected) case
following the if statement, reducing indentation and making the logic a
bit easier to follow. Also make the if statement's condition as unlikely
since it's not expected to ever happen, as it signals some corruption,
making it clear and hint the compiler to generate more efficient code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we didn't found an extent item with the initial btrfs_search_slot()
call, it's pointless to test if the "metadata" variable is "true", because
right after we check if the key type is BTRFS_METADATA_ITEM_KEY and that
is the case only when "metadata" is set to "true". So remove the redundant
check.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of a BUG_ON() just return an error, log an error message and
abort the transaction in case we find an extent buffer belonging to the
relocation tree that doesn't have the full backref flag set. This is
unexpected and should never happen (save for bugs or a potential bad
memory).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We keep a "new_flags" variable only to keep track if we need to update the
metadata extent's flags, and when we set BTRFS_BLOCK_FLAG_FULL_BACKREF in
the variable, we do it in an inner scope. Then check in an outer scope
if the variable is not 0 and if so call btrfs_set_disk_extent_flags().
The variable isn't used for anything else. This is somewhat confusing, so
to make it more straightforward update the extent's flags where we are
currently updating "new_flags" and remove the variable.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are no callers of btrfs_lookup_extent_info() that pass a NULL value
for the transaction handle argument, so there's no point in having special
logic to deal with the NULL. The last caller that passed a NULL value was
removed in commit 19b546d7a1 ("btrfs: relocation:
Use btrfs_find_all_leafs to locate data extent parent tree leaves").
So remove the NULL handling from btrfs_lookup_extent_info().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_force_cow_block() we have several error paths that need to
unlock the "cow" extent buffer, drop the reference on it and then return
an error. This is a bit verbose so add a label where we perform these
tasks and make the error paths jump to that label.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When freeing a tree block, at btrfs_free_tree_block(), if we fail to
create a delayed reference we don't deal with the error and just do a
BUG_ON(). The error most likely to happen is -ENOMEM, and we have a
comment mentioning that only -ENOMEM can happen, but that is not true,
because in case qgroups are enabled any error returned from
btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned
from btrfs_search_slot() for example) can be propagated back to
btrfs_free_tree_block().
So stop doing a BUG_ON() and return the error to the callers and make
them abort the transaction to prevent leaking space. Syzbot was
triggering this, likely due to memory allocation failure injection.
Reported-by: syzbot+a306f914b4d01b3958fe@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000fcba1e05e998263c@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's pointless to pass a super block argument to btrfs_iget_locked()
because we always pass a root and from it we can get the super block
through:
root->fs_info->sb
So remove the super block argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's pointless to pass a super block argument to btrfs_iget_path() because
we always pass a root and from it we can get the super block through:
root->fs_info->sb
So remove the super block argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's pointless to pass a super block argument to btrfs_iget() because we
always pass a root and from it we can get the super block through:
root->fs_info->sb
So remove the super block argument.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 2b2553f123 ("btrfs: stop setting PageError in the data I/O
path") btrfs no longer utilizes subpage error bitmaps anymore, but the
commit forgot to remove the error bitmap in btrfs_subpage_dump_bitmap(),
resulting in possible meaningless result for the error bitmap.
Fix it by just removing the error bitmap dumping.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Snapshot delete has some complicated looking code that is weirdly subtle
at times. I've cleaned it up the best I can without re-writing it, but
there are still a lot of details that are non-obvious. Add a bunch of
comments to the main parts of the code to help future developers better
understand the mechanics of snapshot deletion.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is
incorrect, we have proper error handling here, return the error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In walk_up_proc() we have several sanity checks that should only trip if
the programmer made a mistake. Convert these to ASSERT()'s instead of
BUG_ON()'s.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In reada we BUG_ON(refs == 0), which could be unkind since we aren't
holding a lock on the extent leaf and thus could get a transient
incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which
could happen if we have extent tree corruption. Change that to return
-EUCLEAN. In do_walk_down() we catch this case and handle it correctly,
however we return -EIO, which -EUCLEAN is a more appropriate error code.
Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert
that to proper error handling. Also adjust the error message so we can
actually do something with the information.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a couple of areas where we check to make sure the tree block is
locked before looking up or messing with references. This is old code
so it has this as BUG_ON(). Convert this to ASSERT() for developers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have blanket BUG_ON(ret) after every one of these reference mod
attempts, which is just incorrect. If we encounter any errors during
walk_down_tree() we will abort, so abort on any one of these failures.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We handle errors here properly, ENOMEM isn't fatal, return the error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a big chunk of code in do_walk_down() that will conditionally
remove the reference for the child block we're currently evaluating.
Extract it out into it's own helper and call that from do_walk_down()
instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently duplicate the logic for walking into a node during snapshot
delete. In one case it is during the actual delete, and in the other we
use it for deciding if we should reada the block or not.
Factor this code into it's own helper and comment fully what we're
doing, and then update the two users to use the new helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only set this if wc->refs[level - 1] > 1, and we check this way up
above where we need it because the first thing we do before dropping our
refs is reset wc->refs[level - 1] to 0. Reorder resetting of wc->refs
to after our drop logic, and then remove the need_account variable and
simply check wc->refs[level - 1] directly instead of using a variable.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
do_walk_down() already has a bunch of things going on, and there's a bit
of code related to reading in the next eb if we decide we need it. Move
this code off into it's own helper to clean up do_walk_down() a little
bit.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a flag we're passing around everywhere, add a field to
walk_control that we're already passing around everywhere and use that
instead.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if our extent buffer isn't uptodate we will drop the lock,
free it, and then call read_tree_block() for the bytenr. This is
inefficient, we already have the extent buffer, we can simply call
btrfs_read_extent_buffer().
Merge these two cases down into one if statement, if we are not uptodate
we can drop the lock, trigger readahead, and do the read using
btrfs_read_extent_buffer(), and carry on.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have a handful of btrfs_check_eb_owner() calls in various
places and helpers that read extent buffers. However we call this in
the endio handler for every metadata block, so these extra checks are
unnecessary, simply remove them from everywhere except the endio
handler.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We do find_extent_buffer(), and then if we don't find the eb in cache we
call btrfs_find_create_tree_block(), which calls find_extent_buffer()
first and then allocates the extent buffer.
The reason we're doing this is because if we don't find the extent
buffer in cache we set reada = 1. However this doesn't matter, because
lower down we only trigger reada if !btrfs_buffer_uptodate(eb), which is
what the case would be if we didn't find the extent buffer in cache and
had to allocate it.
Clean this up to simply call btrfs_find_create_tree_block(), and then
use the fact that we're having to read the extent buffer off of disk to
go ahead and kick off readahead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As of commit 1b53e51a4a ("btrfs: don't commit transaction for every
subvol create") we started to make any fsync after creating a subvolume
to fallback to a transaction commit if the fsync is performed in the
same transaction that was used to create the subvolume. This happens
with the following at ioctl.c:create_subvol():
$ cat fs/btrfs/ioctl.c
(...)
/* Tree log can't currently deal with an inode which is a new root. */
btrfs_set_log_full_commit(trans);
(...)
Note that the comment is misleading as the problem is not that fsync can
not deal with the root inode of a new root, but that we can not log any
inode that belongs to a root that was not yet persisted because that would
make log replay fail since the root doesn't exist at log replay time.
The above simply makes any fsync fallback to a full transaction commit if
it happens in the same transaction used to create the subvolume - even if
it's an inode that belongs to any other subvolume. This is a brute force
solution and it doesn't necessarily improve performance for every workload
out there - it just moves a full transaction commit from one place, the
subvolume creation, to another - an fsync for any inode.
Just improve on this by making the fallback to a transaction commit only
for an fsync against an inode of the new subvolume, or for the directory
that contains the dentry that points to the new subvolume (in case anyone
attempts to fsync the directory in the same transaction).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When creating and deleting a subvolume, after starting a transaction we
are explicitly calling btrfs_record_root_in_trans() for the root which we
passed to btrfs_start_transaction(). This is pointless because at
transaction.c:start_transaction() we end up doing that call, regardless
of whether we actually start a new transaction or join an existing one,
and if we were not it would mean the root item of that root would not
be updated in the root tree when committing the transaction, leading to
problems easy to spot with fstests for example.
Remove these redundant calls. They were introduced with commit
74e9795812 ("btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume
operations").
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All parameters passed into setup_relocation_extent_mapping() can be
derived from 'struct reloc_control', so only pass in a 'struct
reloc_control'.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a 'struct reloc_control' to prealloc_file_extent_cluster()
instead of passing its members 'data_inode' and 'cluster' on their own.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In describe_relocation() the fs_info is only needed for printing
information via btrfs_info() and can easily be accessed via the passed
in 'struct btrfs_block_group'.
So we can safely remove the fs_info parameter.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a struct reloc_control to relocate_one_folio, instead of passing
it's members data_inode and cluster as separate arguments to the function.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing in a reloc_control's data_inode and
file_extent_cluster members, pass in the whole reloc_control structure.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pass a 'struct reloc_control' to relocate_data_extent() instead of
it's data_inode and file_extent_cluster separately.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During ordered extent splitting if we find a duplicated ordered extent
when attempting to insert the new ordered extent we panic but with a
message that has the "zoned:" prefix. This is because the splitting used
to be exclusive for zoned filesystems, but as of commit b73a6fd1b1
("btrfs: split partial dio bios before submit") it can also be done for
non zoned filesystems during direct IO writes. So remove the "zoned:"
prefix from the message and mention the split to make it more specific
and different from the panic message at insert_ordered_extent().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We never expect an ordered extent insertion to fail due to already having
another ordered extent in the tree for the same file offset, since we
always wait for existing ordered extents in a range to complete before
writing into the range again. So mark the failure checks for the results
of tree_insert() as unlikely, to make it clear it's never expected (save
exceptional causes like bugs or memory corruptions) and to serve as a hint
for the compiler to possibly generate better code.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_split_ordered_extent(), we are removing and re-inserting the
ordered extent that we are trimming, but we don't need to since the
trimming doesn't change its position in the red black tree because we
don't have overlapping ordered extents (that would imply double allocation
of extents) and we know the split length is smaller than the ordered
extent's num_bytes field (we checked that early in the function).
So drop the remove and re-insert code for the slit ordered extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are subtle details about why the root's ordered_extent_lock is held,
so add a comment mentioning them.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_wait_ordered_extents(), there's no point in updating the counters
after locking the root's ordered extent lock, as the counters are local.
So change this to update the counters before taking the lock.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_wait_ordered_roots(), there's no point in decrementing the
counter after locking fs_info->ordered_root_lock as the counter is local.
So change this to decrement the counter before taking the lock.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can add const to many parameters, this is for clarity and minor
addition to safety. There are some minor effects, in the assembly
code and .ko measured on release config. This patch does not cover all
possible conversions.
Signed-off-by: David Sterba <dsterba@suse.com>
There is already an error inside that header:
#if !defined(__LINUX_SPINLOCK_TYPES_H)
# error "Do not include directly, include spinlock_types.h"
#endif
Thankfully it never get triggered as some other headers have already
included spinlock_types.h.
However clangd would still do a proper warning on that if only
extent_map.h is opened.
Fix it by using spinlock_types.h instead.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several headers that are including themselves, triggering clangd
warnings.
Such includes are caused by commit 602035d7fe ("btrfs: add forward
declarations and headers, part 2").
Just remove such unnecessary include.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Generic slab works fine allocating btrfs_qgroup_extent_record
structures. It's not necessary to create a dedicated kmem cache that
would be created but unused if quotas were not enabled. Let's delete the
TODO line.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Junchao Sun <sunjunchao2870@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When extent_write_locked_range() generated an inline extent, it would
set and finish the writeback for the whole page.
Although currently it's safe since subpage disables inline creation,
for the sake of consistency, let it go with subpage helpers to set and
clear the writeback flags.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For subpage + zoned case, the following workload can lead to rsv data
leak at unmount time:
# mkfs.btrfs -f -s 4k $dev
# mount $dev $mnt
# fsstress -w -n 8 -d $mnt -s 1709539240
0/0: fiemap - no filename
0/1: copyrange read - no filename
0/2: write - no filename
0/3: rename - no source filename
0/4: creat f0 x:0 0 0
0/4: creat add id=0,parent=-1
0/5: writev f0[259 1 0 0 0 0] [778052,113,965] 0
0/6: ioctl(FIEMAP) f0[259 1 0 0 224 887097] [1294220,2291618343991484791,0x10000] -1
0/7: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 224 887097] return 25, fallback to stat()
0/7: dwrite f0[259 1 0 0 224 887097] [696320,102400] 0
# umount $mnt
The dmesg includes the following rsv leak detection warning (all call
trace skipped):
------------[ cut here ]------------
WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8653 btrfs_destroy_inode+0x1e0/0x200 [btrfs]
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8654 btrfs_destroy_inode+0x1a8/0x200 [btrfs]
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8660 btrfs_destroy_inode+0x1a0/0x200 [btrfs]
---[ end trace 0000000000000000 ]---
BTRFS info (device sda): last unmount of filesystem 1b4abba9-de34-4f07-9e7f-157cf12a18d6
------------[ cut here ]------------
WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs]
---[ end trace 0000000000000000 ]---
BTRFS info (device sda): space_info DATA has 268218368 free, is not full
BTRFS info (device sda): space_info total=268435456, used=204800, pinned=0, reserved=0, may_use=12288, readonly=0 zone_unusable=0
BTRFS info (device sda): global_block_rsv: size 0 reserved 0
BTRFS info (device sda): trans_block_rsv: size 0 reserved 0
BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0
------------[ cut here ]------------
WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs]
---[ end trace 0000000000000000 ]---
BTRFS info (device sda): space_info METADATA has 267796480 free, is not full
BTRFS info (device sda): space_info total=268435456, used=131072, pinned=0, reserved=0, may_use=262144, readonly=0 zone_unusable=245760
BTRFS info (device sda): global_block_rsv: size 0 reserved 0
BTRFS info (device sda): trans_block_rsv: size 0 reserved 0
BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0
Above $dev is a tcmu-runner emulated zoned HDD, which has a max zone
append size of 64K, and the system has 64K page size.
[CAUSE]
I have added several trace_printk() to show the events (header skipped):
> btrfs_dirty_pages: r/i=5/259 dirty start=774144 len=114688
> btrfs_dirty_pages: r/i=5/259 dirty part of page=720896 off_in_page=53248 len_in_page=12288
> btrfs_dirty_pages: r/i=5/259 dirty part of page=786432 off_in_page=0 len_in_page=65536
> btrfs_dirty_pages: r/i=5/259 dirty part of page=851968 off_in_page=0 len_in_page=36864
The above lines show our buffered write has dirtied 3 pages of inode
259 of root 5:
704K 768K 832K 896K
I |////I/////////////////I///////////| I
756K 868K
|///| is the dirtied range using subpage bitmaps. and 'I' is the page
boundary.
Meanwhile all three pages (704K, 768K, 832K) have their PageDirty
flag set.
> btrfs_direct_write: r/i=5/259 start dio filepos=696320 len=102400
Then direct IO write starts, since the range [680K, 780K) covers the
beginning part of the above dirty range, we need to writeback the
two pages at 704K and 768K.
> cow_file_range: r/i=5/259 add ordered extent filepos=774144 len=65536
> extent_write_locked_range: r/i=5/259 locked page=720896 start=774144 len=65536
Now the above 2 lines show that we're writing back for dirty range
[756K, 756K + 64K).
We only writeback 64K because the zoned device has max zone append size
as 64K.
> extent_write_locked_range: r/i=5/259 clear dirty for page=786432
!!! The above line shows the root cause. !!!
We're calling clear_page_dirty_for_io() inside extent_write_locked_range(),
for the page 768K.
This is because extent_write_locked_range() can go beyond the current
locked page, here we hit the page at 768K and clear its page dirt.
In fact this would lead to the desync between subpage dirty and page
dirty flags. We have the page dirty flag cleared, but the subpage range
[820K, 832K) is still dirty.
After the writeback of range [756K, 820K), the dirty flags look like
this, as page 768K no longer has dirty flag set.
704K 768K 832K 896K
I I | I/////////////| I
820K 868K
This means we will no longer writeback range [820K, 832K), thus the
reserved data/metadata space would never be properly released.
> extent_write_cache_pages: r/i=5/259 skip non-dirty folio=786432
Now even though we try to start writeback for page 768K, since the
page is not dirty, we completely skip it at extent_write_cache_pages()
time.
> btrfs_direct_write: r/i=5/259 dio done filepos=696320 len=0
Now the direct IO finished.
> cow_file_range: r/i=5/259 add ordered extent filepos=851968 len=36864
> extent_write_locked_range: r/i=5/259 locked page=851968 start=851968 len=36864
Now we writeback the remaining dirty range, which is [832K, 868K).
Causing the range [820K, 832K) never to be submitted, thus leaking the
reserved space.
This bug only affects subpage and zoned case. For non-subpage and zoned
case, we have exactly one sector for each page, thus no such partial dirty
cases.
For subpage and non-zoned case, we never go into run_delalloc_cow(), and
normally all the dirty subpage ranges would be properly submitted inside
__extent_writepage_io().
[FIX]
Just do not clear the page dirty at all inside extent_write_locked_range().
As __extent_writepage_io() would do a more accurate, subpage compatible
clear for page and subpage dirty flags anyway.
Now the correct trace would look like this:
> btrfs_dirty_pages: r/i=5/259 dirty start=774144 len=114688
> btrfs_dirty_pages: r/i=5/259 dirty part of page=720896 off_in_page=53248 len_in_page=12288
> btrfs_dirty_pages: r/i=5/259 dirty part of page=786432 off_in_page=0 len_in_page=65536
> btrfs_dirty_pages: r/i=5/259 dirty part of page=851968 off_in_page=0 len_in_page=36864
The page dirty part is still the same 3 pages.
> btrfs_direct_write: r/i=5/259 start dio filepos=696320 len=102400
> cow_file_range: r/i=5/259 add ordered extent filepos=774144 len=65536
> extent_write_locked_range: r/i=5/259 locked page=720896 start=774144 len=65536
And the writeback for the first 64K is still correct.
> cow_file_range: r/i=5/259 add ordered extent filepos=839680 len=49152
> extent_write_locked_range: r/i=5/259 locked page=786432 start=839680 len=49152
Now with the fix, we can properly writeback the range [820K, 832K), and
properly release the reserved data/metadata space.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have a subpage range like this for a 16K page with 4K sectorsize:
0 4K 8K 12K 16K
|/////| |//////| |
|/////| = dirty range
Currently writepage_delalloc() would go through the following steps:
- lock range [0, 4K)
- run delalloc range for [0, 4K)
- lock range [8K, 12K)
- run delalloc range for [8K 12K)
So far it's fine for regular subpage writeback, as
btrfs_run_delalloc_range() can only go into one of run_delalloc_nocow(),
cow_file_range() and run_delalloc_compressed().
But there is a special case for zoned subpage, where we will go
through run_delalloc_cow(), which would create the ordered extent for the
range and immediately submit the range.
This would unlock the whole page range, causing all kinds of different
ASSERT()s related to locked page.
Address the page unlocking problem of run_delalloc_cow(), by changing
the workflow to the following one:
- lock range [0, 4K)
- lock range [8K, 12K)
- run delalloc range for [0, 4K)
- run delalloc range for [8K, 12K)
So that run_delalloc_cow() can only unlock the full page until the
last lock user released.
To do that:
- Utilize subpage locked bitmap
So for every delalloc range we found, call
btrfs_folio_set_writer_lock() to populate the subpage locked bitmap,
and later btrfs_folio_end_all_writers() if the page is fully unlocked.
So we know there is a delalloc range that needs to be run later.
- Save the @delalloc_end as @last_delalloc_end inside writepage_delalloc()
Since subpage locked bitmap is only for ranges inside the page,
meanwhile we can have delalloc range ends beyond our page boundary,
we have to save the @last_delalloc_end just in case it's beyond our
page boundary.
Although there is one extra point to notice:
- We need to handle errors in previous iteration
Since we can have multiple locked delalloc ranges we have to call
run_delalloc_ranges() multiple times.
If we hit an error half way, we still need to unlock the remaining
ranges.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Three new helpers are introduced for the incoming subpage delalloc locking
change.
- btrfs_folio_set_writer_lock()
This is to mark specified range with subpage specific writer lock.
After calling this, the subpage range can be proper unlocked by
btrfs_folio_end_writer_lock()
- btrfs_subpage_find_writer_locked()
This is to find the writer locked subpage range in a page.
With the help of btrfs_folio_set_writer_lock(), it can allow us to
record and find previously locked subpage range without extra memory
allocation.
- btrfs_folio_end_all_writers()
This is for the locked_page of __extent_writepage(), as there may be
multiple subpage delalloc ranges locked.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function __extent_writepage_io() is designed to find all dirty ranges of
a page, and add the dirty ranges to the bio_ctrl for submission.
It requires all the dirtied ranges to be covered by an ordered extent.
It gets called in two locations, but one call site is not subpage aware:
- __extent_writepage()
It gets called when writepage_delalloc() returned 0, which means
writepage_delalloc() has handled delalloc for all subpage sectors
inside the page.
So this call site is OK.
- extent_write_locked_range()
This call site is utilized by zoned support, and in this case, we may
only run delalloc range for a subset of the page, like this: (64K page
size)
0 16K 32K 48K 64K
|/////| |///////| |
In the above case, if extent_write_locked_range() is only triggered for
range [0, 16K), __extent_writepage_io() would still try to submit
the dirty range of [32K, 48K), then it would not find any ordered
extent for it and triggers various ASSERT()s.
Fix this problem by:
- Introducing @start and @len parameters to specify the range
For the first call site, we just pass the whole page, and the behavior
is not touched, since run_delalloc_range() for the page should have
created all ordered extents for the page.
For the second call site, we avoid touching anything beyond the
range, thus avoiding the dirty range which is not yet covered by any
delalloc range.
- Making btrfs_folio_assert_not_dirty() subpage aware
The only caller is inside __extent_writepage_io(), and since that
caller now accepts a subpage range, we should also check the subpage
range other than the whole page.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/btrfs/btrfs.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop the variable 'err', reuse the variable 'ret' by reinitializing it to
zero where necessary.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix coding style: rename the return variable to 'ret' in the function
btrfs_recover_relocation instead of 'err'.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A preparatory patch to rename 'err' to 'ret', but ret is already used as an
intermediary return value, so first rename 'ret' to 'ret2'.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the function btrfs_recover_relocation(), currently the variable 'err'
carries the return value and 'ret' holds the intermediary return value.
However, in some lines, we don't need this two-step approach; we can
directly use 'err'. So, optimize them, which requires reinitializing 'err'
to zero at two locations.
This is a preparatory patch to fix the code style by renaming 'err'
to 'ret'.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since err represents the function return value, rename it as ret,
and rename the original ret, which serves as a helper return value,
to found. Also, optimize the code to continue call btrfs_put_root()
for the rest of the root if even after btrfs_orphan_cleanup() returns
error.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following 3 parameters can be cleaned up using btrfs_file_extent
structure:
- len
btrfs_file_extent::num_bytes
- orig_block_len
btrfs_file_extent::disk_num_bytes
- ram_bytes
btrfs_file_extent::ram_bytes
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Most parameters of create_io_em() can be replaced by the members with
the same name inside btrfs_file_extent.
Do a direct parameters cleanup here.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All parameters after @filepos of btrfs_alloc_ordered_extent() can be
replaced with btrfs_file_extent structure.
This patch does the cleanup, meanwhile some points to note:
- Move btrfs_file_extent structure to ordered-data.h
The structure is needed by both btrfs_alloc_ordered_extent() and
can_nocow_extent(), but since btrfs_inode.h includes
ordered-data.h, so we need to move the structure to ordered-data.h.
- Move the special handling of NOCOW/PREALLOC into
btrfs_alloc_ordered_extent()
This is to allow btrfs_split_ordered_extent() to properly split them
for DIO.
For now just move the handling into btrfs_alloc_ordered_extent() to
simplify the callers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following functions and structures can be simplified using the
btrfs_file_extent structure:
- can_nocow_extent()
No need to return ram_bytes/orig_block_len through the parameter list,
the @file_extent parameter contains all the needed info.
- can_nocow_file_extent_args
The following members are no longer needed:
* disk_bytenr
This one is confusing as it's not really the
btrfs_file_extent_item::disk_bytenr, but where the IO would be,
thus it's file_extent::disk_bytenr + file_extent::offset now.
* num_bytes
Now file_extent::num_bytes.
* extent_offset
Now file_extent::offset.
* disk_num_bytes
Now file_extent::disk_num_bytes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The member extent_map::block_start can be calculated from
extent_map::disk_bytenr + extent_map::offset for regular extents.
And otherwise just extent_map::disk_bytenr.
And this is already validated by the validate_extent_map(). Now we can
remove the member.
However there is a special case in btrfs_create_dio_extent() where we
for NOCOW/PREALLOC ordered extents cannot directly use the resulting
btrfs_file_extent, as btrfs_split_ordered_extent() cannot handle them
yet.
So for that call site, we pass file_extent->disk_bytenr +
file_extent->num_bytes as disk_bytenr for the ordered extent, and 0 for
offset.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent_map::block_len is either extent_map::len (non-compressed
extent) or extent_map::disk_num_bytes (compressed extent).
Since we already have sanity checks to do the cross-checks between the
new and old members, we can drop the old extent_map::block_len now.
For most call sites, they can manually select extent_map::len or
extent_map::disk_num_bytes, since most if not all of them have checked
if the extent is compressed.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have extent_map::offset, the old extent_map::orig_start is just
extent_map::start - extent_map::offset for non-hole/inline extents.
And since the new extent_map::offset is already verified by
validate_extent_map() while the old orig_start is not, let's just remove
the old member from all call sites.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since extent_map structure has the all the needed members to represent a
file extent directly, we can apply all the file extent sanity checks to
an extent map.
The new sanity checks will cross check both the old members
(block_start/block_len/orig_start) and the new members
(disk_bytenr/disk_num_bytes/offset).
There is a special case for offset/orig_start/start cross check, we only
do such sanity check for compressed extent, as only compressed
read/encoded write really utilize orig_start.
This can be proved by the cleanup patch of orig_start.
The checks happens at the following times:
- add_extent_mapping()
This is for newly added extent map
- replace_extent_mapping()
This is for btrfs_drop_extent_map_range() and split_extent_map()
- try_merge_map()
For a lot of call sites we have to properly populate all the members to
pass the sanity check, meanwhile the following code needs extra
modification:
- setup_file_extents() from inode-tests
The file extents layout of setup_file_extents() is already too invalid
that tree-checker would reject most of them in real world.
However there is just a special unaligned regular extent which has
mismatched disk_num_bytes (4096) and ram_bytes (4096 - 1).
So instead of dropping the whole test case, here we just unify
disk_num_bytes and ram_bytes to 4096 - 1.
- test_case_7() from extent-map-tests
An extent is inserted with 16K length, but on-disk extent size is
only 4K.
This means it must be a compressed extent, so set the compressed flag
for it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce two new members for extent_map:
- disk_bytenr
- offset
Both are matching the members with the same name inside
btrfs_file_extent_items.
For now this patch only touches those members when:
- Reading btrfs_file_extent_items from disk
- Inserting new holes
- Merging two extent maps
With the new disk_bytenr and disk_num_bytes, doing merging would be a
little more complex, as we have 3 different cases:
* Both extent maps are referring to the same data extents
|<----- data extent A ----->|
|<- em 1 ->|<- em 2 ->|
* Both extent maps are referring to different data extents
|<-- data extent A -->|<-- data extent B -->|
|<- em 1 ->|<- em 2 ->|
* One of the extent maps is referring to a merged and larger data
extent that covers both extent maps
This is not really valid case other than some selftests.
So this test case would be removed.
A new helper merge_ondisk_extents() is introduced to handle the above
valid cases.
To properly assign values for those new members, a new btrfs_file_extent
parameter is introduced to all the involved call sites.
- For NOCOW writes the btrfs_file_extent would be exposed from
can_nocow_file_extent().
- For other writes, the members can be easily calculated
As most of them have 0 offset and utilizing the whole on-disk data
extent.
The exception is encoded write, but thankfully that interface provided
offset directly and all other needed info.
For now, both the old members (block_start/block_len/orig_start) are
co-existing with the new members (disk_bytenr/offset), meanwhile all the
critical code is still using the old members only.
The cleanup will happen later after all the old and new members are
properly validated.
There would be some re-ordering for the assignment of the extent_map
members, now we follow the new ordering:
- start and len
Or file_pos and num_bytes for other structures.
- disk_bytenr and disk_num_bytes
- offset and ram_bytes
- compression
So expect some seemingly unrelated line movement.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently function can_nocow_extent() only returns members needed for
extent_map.
However since we will soon change the extent_map structure to be more
like btrfs_file_extent_item, we want to expose the expected file extent
caused by the NOCOW write for future usage.
This introduces a new structure, btrfs_file_extent, to be a more
memory access friendly representation of btrfs_file_extent_item.
And use that structure to expose the expected file extent caused by the
NOCOW write.
For now there is no user of the new structure yet.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This would make it very obvious that the member just matches
btrfs_file_extent_item::disk_num_bytes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the core of the fiemap code lives in extent_io.c, which does
not make any sense because it's not related to extent IO at all (and it
was not as well before the big rewrite of fiemap I did some time ago).
The entry point for fiemap, btrfs_fiemap(), lives in inode.c since it's
an inode operation.
Since there's a significant amount of fiemap code, move all of it into a
dedicated file, including its entry point inode.c:btrfs_fiemap().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that there is a helper to commit the current transaction and we are
using it, there's no need for the label and goto statements at
ensure_commit_roots_uptodate(). So replace them with direct return
statements that call btrfs_commit_current_transaction().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places that attach to the current transaction with
btrfs_attach_transaction_barrier() and then commit the transaction if
there is one. Add a helper and use it to deduplicate this pattern.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At finish_extent_writes_for_zoned() we use btrfs_join_transaction() to
catch any running transaction and then commit it. This will however create
a new and empty transaction in case there's no running transaction anymore
(got committed by the transaction kthread or other task for example) or
there's a running transaction finishing its commit and with a state >=
TRANS_STATE_UNBLOCKED. In the former case we don't need to do anything
while in the second case we just need to wait for the transaction to
complete its commit.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction. This helps avoiding creating and
committing empty transactions, saving IO, time and unnecessary rotation of
the backup roots in the super block.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At ensure_commit_roots_uptodate() we use btrfs_join_transaction() to
catch any running transaction and then commit it. This will however create
a new and empty transaction in case there's no running transaction anymore
(got committed by the transaction kthread or other task for example) or
there's a running transaction finishing its commit and with a state >=
TRANS_STATE_UNBLOCKED. In the former case we don't need to do anything
while in the second case we just need to wait for the transaction to
complete its commit.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction. This helps avoiding creating and
committing empty transactions, saving IO, time and unnecessary rotation of
the backup roots in the super block.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before starting a send operation we have to make sure that every root has
its commit root matching the regular root, to that send doesn't find stale
inodes in the commit root (inodes that were deleted in the regular root)
and fails the inode lookups with -ESTALE.
Currently we keep looking for roots used by the send operation and as soon
as we find one we commit the current transaction (or a new one since
btrfs_join_transaction() creates one if there isn't any running or the
running one is in a state >= TRANS_STATE_UNBLOCKED). It's pointless to
keep looking until we don't find any, because after the first transaction
commit all the other roots are updated too, as they were already tagged in
the fs_info->fs_roots_radix radix tree when they were modified in order to
have a commit root different from the regular root.
Currently we are also always passing the main send root into
btrfs_join_transaction(), which despite not having any functional issue,
it is not optimal because in case the root wasn't modified we end up
adding it to fs_info->fs_roots_radix and then update its root item in the
root tree when committing the transaction, causing unnecessary work.
So simplify and make this more efficient by removing the looping and by
passing the first root we found that is modified as the argument to
btrfs_join_transaction().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_commit_super(), called in a few contexts such as when unmounting
a filesystem, we use btrfs_join_transaction() to catch any running
transaction and then commit it. This will however create a new and empty
transaction in case there's no running transaction or there's a running
transaction with a state >= TRANS_STATE_UNBLOCKED.
As we just want to be sure that any existing transaction is fully
committed, we can use btrfs_attach_transaction_barrier() instead of
btrfs_join_transaction(), therefore avoiding the creation and commit of
empty transactions, which only waste IO and causes rotation of the
precious backup roots.
Example where we create and commit a pointless empty transaction:
$ mkfs.btrfs -f /dev/sdj
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 6
$ mount /dev/sdj /mnt/sdj
$ touch /mnt/sdj/foo
# Commit the currently open transaction. Just 'sync' or wait ~30
# seconds for the transaction kthread to commit it.
$ sync
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 7
$ umount /mnt/sdj
$ btrfs inspect-internal dump-super /dev/sdj | grep -e '^generation'
generation 8
The transaction with id 8 was pointless, an empty transaction that did
not achieve anything.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When flushing reservations we are using btrfs_join_transaction() to get a
handle for the current transaction and then commit it to try to release
space. However btrfs_join_transaction() has some undesirable consequences:
1) If there's no running transaction, it will create one, and we will
commit it right after. This is unnecessary because it will not release
any space, and it will result in unnecessary IO and rotation of backup
roots in the superblock;
2) If there's a current transaction and that transaction is committing
(its state is >= TRANS_STATE_COMMIT_DOING), it will wait for that
transaction to almost finish its commit (for its state to be >=
TRANS_STATE_UNBLOCKED) and then start and return a new transaction.
We will then commit that new transaction, which is pointless because
all we wanted was to wait for the current (previous) transaction to
fully finish its commit (state == TRANS_STATE_COMPLETED), and by
starting and committing a new transaction we are wasting IO too and
causing unnecessary rotation of backup roots in the superblock.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The range is specified only in two ways, we can simplify the case for
the whole filesystem range as a NULL block group parameter.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if we fully clean a subvolume (not only delete its directory,
but fully clean all it's related data and root item), the associated
qgroup would not be removed.
We have "btrfs qgroup clear-stale" to handle such 0 level qgroups.
Change the behavior to automatically removie the qgroup of a fully
cleaned subvolume when possible:
- Full qgroup but still consistent
We can and should remove the qgroup.
The qgroup numbers should be 0, without any rsv.
- Full qgroup but inconsistent
Can happen with drop_subtree_threshold feature (skip accounting
and mark qgroup inconsistent).
We can and should remove the qgroup.
Higher level qgroup numbers will be incorrect, but since qgroup
is already inconsistent, it should not be a problem.
- Squota mode
This is the special case, we can only drop the qgroup if its numbers
are all 0.
This would be handled by can_delete_qgroup(), so we only need to check
the return value and ignore the -EBUSY error.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1222847
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Currently if one is utilizing "qgroups/drop_subtree_threshold" sysfs,
and a snapshot with level higher than that value is dropped, we will
not be able to delete the qgroup until next qgroup rescan:
uuid=ffffffff-eeee-dddd-cccc-000000000000
wipefs -fa $dev
mkfs.btrfs -f $dev -O quota -s 4k -n 4k -U $uuid
mount $dev $mnt
btrfs subvolume create $mnt/subv1/
for (( i = 0; i < 1024; i++ )); do
xfs_io -f -c "pwrite 0 2k" $mnt/subv1/file_$i > /dev/null
done
sync
btrfs subvolume snapshot $mnt/subv1 $mnt/snapshot
btrfs quota enable $mnt
btrfs quota rescan -w $mnt
sync
echo 1 > /sys/fs/btrfs/$uuid/qgroups/drop_subtree_threshold
btrfs subvolume delete $mnt/snapshot
btrfs subvolume sync $mnt
btrfs qgroup show -prce --sync $mnt
btrfs qgroup destroy 0/257 $mnt
umount $mnt
The final qgroup removal would fail with the following error:
ERROR: unable to destroy quota group: Device or resource busy
[CAUSE]
The above script would generate a subvolume of level 2, then snapshot
it, enable qgroup, set the drop_subtree_threshold, then drop the
snapshot.
Since the subvolume drop would meet the threshold, qgroup would be
marked inconsistent and skip accounting to avoid hanging the system at
transaction commit.
But currently we do not allow a qgroup with any rfer/excl numbers to be
dropped, and this is not really compatible with the new
drop_subtree_threshold behavior.
[FIX]
Only require the strict zero rfer/excl/rfer_cmpr/excl_cmpr for squota
mode. This is due to the fact that squota can never go inconsistent,
and it can have dropped subvolume but with non-zero qgroup numbers for
future accounting.
For full qgroup mode, we only check if there is a subvolume for it.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reported by 'gcc -Wcast-qual', the argument from which write_extent_buffer()
reads data to write to the eb should be const. In addition the const
needs to be also added to __write_extent_buffer() local buffers.
All callers of write_eb_member() can now be updated to use const for the
input buffer structure or type.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was reported by 'gcc -Wcast-qual', the get_unaligned_le8() simply
returns the argument and there's no reason to drop the cast.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was added in c61a16a701 ("Btrfs: fix the confusion between
delalloc bytes and metadata bytes") and removed in 03fe78cc29
("btrfs: use delalloc_bytes to determine flush amount for
shrink_delalloc") where the calculation was reworked to use a
non-constant numbers. This was found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've started to use for-loop local variables and in a few places this
shadows a function variable. Convert a few cases reported by 'make W=2'.
If applicable also change the style to post-increment, that's the
preferred one.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix variable names in two macros where there's a local function variable
of the same name. In subpage_calc_start_bit() it's in several callers,
in btrfs_abort_transaction() it's only in replace_file_extents().
Found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When running 'make W=2' there are a few reports where a variable of the
same name is declared in a nested block. In all the cases we can use the
one declared in the parent block, no problematic cases were found.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a VFS inode local pointer and then doing many BTRFS_I()
calls inside btrfs_sync_file(), use a btrfs_inode pointer instead. This
makes everything a bit easier to read and less confusing, allowing to
make some statements shorter.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a inode pointer, use a btrfs_inode pointer in the log
context structure, as this is generally what we need and allows for some
internal APIs to take a btrfs_inode instead, making them more consistent
with most of the code base. This will later allow to help to remove a lot
of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_finish_ordered_extent() returns a boolean indicating if
the ordered extent was added to the work queue for completion, but none
of its callers cares about it, so make it return void.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_block_group_root() is declared in disk-io.c; however,
all its callers are in block-group.c. Move it to the latter file and
declare it static.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop the single-use variable bytenr_orig and instead use btrfs_sb_offset()
in the function argument passing.
Fix a stale comment about not automatically fixing a bad primary
superblock from the backup mirror copies. Also, move the comment closer
to where the primary superblock read occurs.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are currently using a cached rb_root (struct rb_root_cached) for the
rb root of struct extent_map_tree. This doesn't offer much of an advantage
here because:
1) It's only advantage over the regular rb_root is that it caches a
pointer to the left most node (first node), so a call to
rb_first_cached() doesn't have to chase pointers until it reaches
the left most node;
2) We only have two scenarios that access left most node with
rb_first_cached():
When dropping all extent maps from an inode, during inode eviction;
When iterating over extent maps during the extent map shrinker;
3) In both cases we keep removing extent maps, which causes deletion of
the left most node so rb_erase_cached() has to call rb_next() to find
out what's the next left most node and assign it to
struct rb_root_cached::rb_leftmost;
4) We can do that ourselves in those two uses cases and stop using a
rb_root_cached rb tree and use instead a regular rb_root rb tree.
This reduces the size of struct extent_map_tree by 8 bytes and, since
this structure is embedded in struct btrfs_inode, it also reduces the
size of that structure by 8 bytes.
So on a 64 bits platform the size of btrfs_inode is reduced from 1032
bytes down to 1024 bytes.
This means we will be able to have 4 inodes per 4K page instead of 3.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we name the rb_root member of struct extent_map_tree as 'map',
which is odd and confusing. Since it's a root node, rename it to 'root'.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On 64 bits platforms we don't really need to have a dedicated member (the
objectid field) for the inode's number since we store in the VFS inode's
i_ino member, which is an unsigned long and this type is 64 bits wide on
64 bits platforms. We only need that field in case we are on a 32 bits
platform because the unsigned long type is 32 bits wide on such platforms
See commit 33345d0152 ("Btrfs: Always use 64bit inode number") regarding
this 64/32 bits detail.
The objectid field of struct btrfs_inode is also used to store the ID of
a root for directories that are stubs for unreferenced roots. In such
cases the inode is a directory and has the BTRFS_INODE_ROOT_STUB runtime
flag set.
So in order to reduce the size of btrfs_inode structure on 64 bits
platforms we can remove the objectid member and use the VFS inode's i_ino
member instead whenever we need to get the inode number. In case the inode
is a root stub (BTRFS_INODE_ROOT_STUB set) we can use the member
last_reflink_trans to store the ID of the unreferenced root, since such
inode is a directory and reflinks can't be done against directories.
So remove the objectid fields for 64 bits platforms and alias the
last_reflink_trans field with a name of ref_root_id in a union.
On a release kernel config, this reduces the size of struct btrfs_inode
from 1040 bytes down to 1032 bytes.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently struct btrfs_inode has a key member, named "location", that is
either:
1) The key of the inode's item. In this case the objectid is the number
of the inode;
2) A key stored in a dir entry with a type of BTRFS_ROOT_ITEM_KEY, for
the case where we have a root that is a snapshot of a subvolume that
points to other subvolumes. In this case the objectid is the ID of
a subvolume inside the snapshotted parent subvolume.
The key is only used to lookup the inode item for the first case, while
for the second it's never used since it corresponds to directory stubs
created with new_simple_dir() and which are marked as dummy, so there's
no actual inode item to ever update. In the second case we only check
the key type at btrfs_ino() for 32 bits platforms and its objectid is
only needed for unlink.
Instead of using a key we can do fine with just the objectid, since we
can generate the key whenever we need it having only the objectid, as
in all use cases the type is always BTRFS_INODE_ITEM_KEY and the offset
is always 0.
So use only an objectid instead of a full key. This reduces the size of
struct btrfs_inode from 1048 bytes down to 1040 bytes on a release kernel.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When not using the NO_HOLES feature we always allocate an io tree for an
inode's file_extent_tree. This is wasteful because that io tree is only
used for regular files, so we allocate more memory than needed for inodes
that represent directories or symlinks for example, or for inodes that
correspond to free space inodes.
So improve on this by allocating the io tree only for inodes of regular
files that are not free space inodes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The index_cnt field of struct btrfs_inode is used only for two purposes:
1) To store the index for the next entry added to a directory;
2) For the data relocation inode to track the logical start address of the
block group currently being relocated.
For the relocation case we use index_cnt because it's not used for
anything else in the relocation use case - we could have used other fields
that are not used by relocation such as defrag_bytes, last_unlink_trans
or last_reflink_trans for example (among others).
Since the csum_bytes field is not used for directories, do the following
changes:
1) Put index_cnt and csum_bytes in a union, and index_cnt is only
initialized when the inode is a directory. The csum_bytes is only
accessed in IO paths for regular files, so we're fine here;
2) Use the defrag_bytes field for relocation, since the data relocation
inode is never used for defrag purposes. And to make the naming better,
alias it to reloc_block_group_start by using a union.
This reduces the size of struct btrfs_inode by 8 bytes in a release
kernel, from 1056 bytes down to 1048 bytes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use the spinlock inode_lock from struct btrfs_root to
serialize access to two different data structures:
1) The delayed inodes xarray (struct btrfs_root::delayed_nodes);
2) The inodes xarray (struct btrfs_root::inodes).
Instead of using our own lock, we can use the spinlock that is part of the
xarray implementation, by using the xa_lock() and xa_unlock() APIs and
using the xarray APIs with the double underscore prefix that don't take
the xarray locks and assume the caller is using xa_lock() and xa_unlock().
So remove the spinlock inode_lock from struct btrfs_root and use the
corresponding xarray locks. This brings 2 benefits:
1) We reduce the size of struct btrfs_root, from 1336 bytes down to
1328 bytes on a 64 bits release kernel config;
2) We reduce lock contention by not using anymore the same lock for
changing two different and unrelated xarrays.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make btrfs_iget_path() simpler and easier to read by avoiding nesting of
if-then-else statements and having an error label to do all the error
handling instead of repeating it a couple times.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When creating a new inode, at btrfs_create_new_inode(), one of the very
last steps is to add the inode to the root's inodes xarray. This often
requires allocating memory which may fail (even though xarrays have a
dedicated kmem_cache which make it less likely to fail), and at that point
we are forced to abort the current transaction (as some, but not all, of
the inode metadata was added to its subvolume btree).
To avoid a transaction abort, preallocate memory for the xarray early at
btrfs_create_new_inode(), so that if we fail we don't need to abort the
transaction and the insertion into the xarray is guaranteed to succeed.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use a red black tree (rb-tree) to track the currently open
inodes of a root (in struct btrfs_root::inode_tree). This however is not
very efficient when the number of inodes is large since rb-trees are
binary trees. For example for 100K open inodes, the tree has a depth of
17. Besides that, inserting into the tree requires navigating through it
and pulling useless cache lines in the process since the red black tree
nodes are embedded within the btrfs inode - on the other hand, by being
embedded, it requires no extra memory allocations.
We can improve this by using an xarray instead, which is efficient when
indices are densely clustered (such as inode numbers), is more cache
friendly and behaves like a resizable array, with a much better search
and insertion complexity than a red black tree. This only has one small
disadvantage which is that insertion will sometimes require allocating
memory for the xarray - which may fail (not that often since it uses a
kmem_cache) - but on the other hand we can reduce the btrfs inode
structure size by 24 bytes (from 1080 down to 1056 bytes) after removing
the embedded red black tree node, which after the next patches will allow
to reduce the size of the structure to 1024 bytes, meaning we will be able
to store 4 inodes per 4K page instead of 3 inodes.
This change does a straightforward change to use an xarray, and results
in a transaction abort if we can't allocate memory for the xarray when
creating an inode - but the next patch changes things so that we don't
need to abort.
Running the following fs_mark test showed some improvements:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
MOUNT_OPTIONS="-o ssd"
FILES=100000
THREADS=$(nproc --all)
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $DEV
mount $MOUNT_OPTIONS $DEV $MNT
OPTS="-S 0 -L 5 -n $FILES -s 0 -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Before this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 92081.6 12505547
16 2400000 0 138222.6 13067072
23 3600000 0 148833.1 13290336
43 4800000 0 97864.7 13931248
53 6000000 0 85597.3 14384313
After this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 93225.1 12571078
16 2400000 0 146720.3 12805007
23 3600000 0 160626.4 13073835
46 4800000 0 116286.2 13802927
53 6000000 0 90087.9 14754892
The test was run with a release kernel config (Debian's default config).
Also capturing the insertion times into the rb tree and into the xarray,
that is measuring the duration of the old function inode_tree_add() and
the duration of the new btrfs_add_inode_to_root() function, gave the
following results (in nanoseconds):
Before this patch, inode_tree_add() execution times:
Count: 5000000
Range: 0.000 - 5536887.000; Mean: 775.674; Median: 729.000; Stddev: 4820.961
Percentiles: 90th: 1015.000; 95th: 1139.000; 99th: 1397.000
0.000 - 7.816: 40 |
7.816 - 37.858: 209 |
37.858 - 170.278: 6059 |
170.278 - 753.961: 2754890 #####################################################
753.961 - 3326.728: 2232312 ###########################################
3326.728 - 14667.018: 4366 |
14667.018 - 64652.943: 852 |
64652.943 - 284981.761: 550 |
284981.761 - 1256150.914: 221 |
1256150.914 - 5536887.000: 7 |
After this patch, btrfs_add_inode_to_root() execution times:
Count: 5000000
Range: 0.000 - 2900652.000; Mean: 272.148; Median: 241.000; Stddev: 2873.369
Percentiles: 90th: 342.000; 95th: 432.000; 99th: 572.000
0.000 - 7.264: 104 |
7.264 - 33.145: 352 |
33.145 - 140.081: 109606 #
140.081 - 581.930: 4840090 #####################################################
581.930 - 2407.590: 43532 |
2407.590 - 9950.979: 2245 |
9950.979 - 41119.278: 514 |
41119.278 - 169902.616: 155 |
169902.616 - 702018.539: 47 |
702018.539 - 2900652.000: 9 |
Average, percentiles, standard deviation, etc, are all much better.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several hard-to-hit ASSERT()s hit inside raid56.
Unfortunately the ASSERT() expression is a little complex, and except
the ASSERT(), there is nothing to provide any clue.
Considering if race is involved, it's pretty hard to reproduce.
Meanwhile sometimes the dump of the rbio structure can provide some
pretty good clues, it's worth to do the extra multi-line dump for
btrfs raid56 related code.
The dump looks like this:
BTRFS critical (device dm-3): bioc logical=4598530048 full_stripe=4598530048 size=0 map_type=0x81 mirror=0 replace_nr_stripes=0 replace_stripe_src=-1 num_stripes=5
BTRFS critical (device dm-3): nr=0 devid=1 physical=1166147584
BTRFS critical (device dm-3): nr=1 devid=2 physical=1145176064
BTRFS critical (device dm-3): nr=2 devid=4 physical=1145176064
BTRFS critical (device dm-3): nr=3 devid=5 physical=1145176064
BTRFS critical (device dm-3): nr=4 devid=3 physical=1145176064
BTRFS critical (device dm-3): rbio flags=0x0 nr_sectors=80 nr_data=4 real_stripes=5 stripe_nsectors=16 scrubp=0 dbitmap=0x0
BTRFS critical (device dm-3): logical=4598530048
assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1702
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Due to a refactoring introduced by commit 53d9981ca2 ("btrfs: split
btrfs_alloc_ordered_extent to allocation and insertion helpers"), the
function btrfs_alloc_ordered_extent() was renamed to
alloc_ordered_extent(), so the comment at btrfs_remove_ordered_extent()
is no longer very accurate. Update the comment to refer to the new
name "alloc_ordered_extent()".
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix typo in the end IO compression callbacks, from "comprssed" to
"compressed".
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_migrate_to_delayed_refs_rsv() is no longer used.
Its last use was removed in commit 2f6397e448 ("btrfs: don't refill
whole delayed refs block reserve when starting transaction").
So remove the function.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not used outside zoned.c, so make it static.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Passing in a 'struct btrfs_io_geometry into handle_ops_on_dev_replace
can reduce the number of arguments by two.
No functional changes otherwise.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ioctls that add relations, create qgroups or set limits start/join
transaction. When quotas are not enabled this is not necessary, there
will be errors reported back anyway but this could be also misleading
and we should really report that quotas are not enabled. For that use
-ENOTCONN.
The helper is meant to do a quick check before any other standard ioctl
checks are done. If quota is disabled meanwhile we still rely on proper
locking inside any active operation changing the qgroup structures.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmaG0jUACgkQxWXV+ddt
WDsg4Q//f7xRooomsRaRvIDN4Add17jyZWuhreMhxKKvdtoRzLq/YZUldGJt1XXu
tVpCvKkVvrJt5UY3b1czfA8GTHeOInZSoqyV8ZaxOAcg6cfKrUtLFi1wAKGU6BK/
S9Zz/9lfbjXhG4PnZW7GRFmH0n68p/dmS+kXPVVPhj7CibxuZJtifflK1r6rHw+Y
PDDnMIPqbrdK+xBfR+SEpG+1uIEFvI6SgsAZG6p0mzcbbUINGp7SpU3v2NVuvdIX
tjTlZhz+D2do4dPk3RJ4Z6dpL+VlZnR1F9CZn6SmPcdGWn6mTkywoukJPP62iHYO
b8Xr4j1mKDPcu55OEPWwhYWOvRP4FvltrGB+35xsQoPlKBBKxSMFgNyEkdfvjtKU
qL9qRYJvm8D2OBqdv5BnawKRSouPcR4KPiM9JSGWRcW6vdOiY3Cd1mnAR8EA1LSd
SRYmBlrZIIjOpEeGkEy2MeNKEH9L5B1wAU21VQd+cAlCKBFUmFb1csZ/vCJJ1B34
swedmirNx0lyZTNBGQsDipkxSM0c/0xj/ysG8N41bLvPUM35x0K9xw5ZqBlTXrrg
Lln51s6TeqSzfEvKdDGikBL3dVhT5I6acRUchQU9YSZ3Bqxj3QCTNnOZMZQsCFkp
CMohduRVHiK4LHQTkU++q8bT8xX20kh/1HIJhAjdnDbrlRY4oTU=
=tyXO
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix folio refcounting when releasing them (encoded write, dummy
extent buffer)
- fix out of bounds read when checking qgroup inherit data
- fix how configurable chunk size is handled in zoned mode
- in the ref-verify tool, fix uninitialized return value when checking
extent owner ref and simple quota are not enabled
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
btrfs: fix folio refcount in btrfs_do_encoded_write()
btrfs: fix uninitialized return value in the ref-verify tool
btrfs: always do the basic checks for btrfs_qgroup_inherit structure
btrfs: zoned: fix calc_available_free_space() for zoned mode
The index argument of page_cache_async_readahead() is just folio->index so
there's no point in passing is separately. Drop it.
Link: https://lkml.kernel.org/r/20240625101909.12234-5-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Another improper use of __folio_put() in an error path after freshly
allocating pages/folios which returns them with the refcount initialized
to 1. The refactor from __free_pages() -> __folio_put() (instead of
folio_put) removed a refcount decrement found in __free_pages() and
folio_put but absent from __folio_put().
Fixes: 13df3775ef ("btrfs: cleanup metadata page pointer usage")
CC: stable@vger.kernel.org # 6.8+
Tested-by: Ed Tomlinson <edtoml@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The conversion to folios switched __free_page() to __folio_put() in the
error path in btrfs_do_encoded_write().
However, this gets the page refcounting wrong. If we do hit that error
path (I reproduced by modifying btrfs_do_encoded_write to pretend to
always fail in a way that jumps to out_folios and running the fstests
case btrfs/281), then we always hit the following BUG freeing the folio:
BUG: Bad page state in process btrfs pfn:40ab0b
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x61be5 pfn:0x40ab0b
flags: 0x5ffff0000000000(node=0|zone=2|lastcpupid=0x1ffff)
raw: 05ffff0000000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000061be5 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: nonzero _refcount
Call Trace:
<TASK>
dump_stack_lvl+0x3d/0xe0
bad_page+0xea/0xf0
free_unref_page+0x8e1/0x900
? __mem_cgroup_uncharge+0x69/0x90
__folio_put+0xe6/0x190
btrfs_do_encoded_write+0x445/0x780
? current_time+0x25/0xd0
btrfs_do_write_iter+0x2cc/0x4b0
btrfs_ioctl_encoded_write+0x2b6/0x340
It turns out __free_page() decreases the page reference count while
__folio_put() does not. Switch __folio_put() to folio_put() which
decreases the folio reference count first.
Fixes: 400b172b8c ("btrfs: compression: migrate compression/decompression paths to folios")
Tested-by: Ed Tomlinson <edtoml@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the ref-verify tool, when processing the inline references of an extent
item, we may end up returning with uninitialized return value, because:
1) The 'ret' variable is not initialized if there are no inline extent
references ('ptr' == 'end' before the while loop starts);
2) If we find an extent owner inline reference we don't initialize 'ret'.
So fix these cases by initializing 'ret' to 0 when declaring the variable
and set it to -EINVAL if we find an extent owner inline references and
simple quotas are not enabled (as well as print an error message).
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/59b40ebe-c824-457d-8b24-0bbca69d472b@gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reports the following regression detected by KASAN:
BUG: KASAN: slab-out-of-bounds in btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277
Read of size 8 at addr ffff88814628ca50 by task syz-executor318/5171
CPU: 0 PID: 5171 Comm: syz-executor318 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277
create_pending_snapshot+0x1359/0x29b0 fs/btrfs/transaction.c:1854
create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1922
btrfs_commit_transaction+0xf20/0x3740 fs/btrfs/transaction.c:2382
create_snapshot+0x6a1/0x9e0 fs/btrfs/ioctl.c:875
btrfs_mksubvol+0x58f/0x710 fs/btrfs/ioctl.c:1029
btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1075
__btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1340
btrfs_ioctl_snap_create_v2+0x1f2/0x3a0 fs/btrfs/ioctl.c:1422
btrfs_ioctl+0x99e/0xc60
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcbf1992509
RSP: 002b:00007fcbf1928218 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcbf1a1f618 RCX: 00007fcbf1992509
RDX: 0000000020000280 RSI: 0000000050009417 RDI: 0000000000000003
RBP: 00007fcbf1a1f610 R08: 00007ffea1298e97 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fcbf19eb660
R13: 00000000200002b8 R14: 00007fcbf19e60c0 R15: 0030656c69662f2e
</TASK>
And it also pinned it down to commit b5357cb268 ("btrfs: qgroup: do not
check qgroup inherit if qgroup is disabled").
[CAUSE]
That offending commit skips the whole qgroup inherit check if qgroup is
not enabled.
But that also skips the very basic checks like
num_ref_copies/num_excl_copies and the structure size checks.
Meaning if a qgroup enable/disable race is happening at the background,
and we pass a btrfs_qgroup_inherit structure when the qgroup is
disabled, the check would be completely skipped.
Then at the time of transaction commitment, qgroup is re-enabled and
btrfs_qgroup_inherit() is going to use the incorrect structure and
causing the above KASAN error.
[FIX]
Make btrfs_qgroup_check_inherit() only skip the source qgroup checks.
So that even if invalid btrfs_qgroup_inherit structure is passed in, we
can still reject invalid ones no matter if qgroup is enabled or not.
Furthermore we do already have an extra safety inside
btrfs_qgroup_inherit(), which would just ignore invalid qgroup sources,
so even if we only skip the qgroup source check we're still safe.
Reported-by: syzbot+a0d1f7e26910be4dc171@syzkaller.appspotmail.com
Fixes: b5357cb268 ("btrfs: qgroup: do not check qgroup inherit if qgroup is disabled")
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
calc_available_free_space() returns the total size of metadata (or
system) block groups, which can be allocated from unallocated disk
space. The logic is wrong on zoned mode in two places.
First, the calculation of data_chunk_size is wrong. We always allocate
one zone as one chunk, and no partial allocation of a zone. So, we
should use zone_size (= data_sinfo->chunk_size) as it is.
Second, the result "avail" may not be zone aligned. Since we always
allocate one zone as one chunk on zoned mode, returning non-zone size
aligned bytes will result in less pressure on the async metadata reclaim
process.
This is serious for the nearly full state with a large zone size device.
Allowing over-commit too much will result in less async reclaim work and
end up in ENOSPC. We can align down to the zone size to avoid that.
Fixes: cb6cbab790 ("btrfs: adjust overcommit logic when very close to full")
CC: stable@vger.kernel.org # 6.9
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=RkBU
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fixup for a recent fix that prevents an infinite loop during block
group reclaim.
Unfortunately it introduced an unsafe way of updating block group list
and could race with relocation. This could be hit on fast devices when
relocation/balance does not have enough space"
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix adding block group to a reclaim list and the unused list during reclaim
There is a potential parallel list adding for retrying in
btrfs_reclaim_bgs_work and adding to the unused list. Since the block
group is removed from the reclaim list and it is on a relocation work,
it can be added into the unused list in parallel. When that happens,
adding it to the reclaim list will corrupt the list head and trigger
list corruption like below.
Fix it by taking fs_info->unused_bgs_lock.
[177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104
[177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0)
[177.529][T2585409] ------------[ cut here ]------------
[177.537][T2585409] kernel BUG at lib/list_debug.c:65!
[177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
[177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1
[177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022
[177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs]
[177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72
[177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286
[177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000
[177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40
[177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08
[177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0
[177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000
[177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000
[177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0
[177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000
[177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400
[177.742][T2585409] PKRU: 55555554
[177.748][T2585409] Call Trace:
[177.753][T2585409] <TASK>
[177.759][T2585409] ? __die_body.cold+0x19/0x27
[177.766][T2585409] ? die+0x2e/0x50
[177.772][T2585409] ? do_trap+0x1ea/0x2d0
[177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.788][T2585409] ? do_error_trap+0xa3/0x160
[177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.805][T2585409] ? handle_invalid_op+0x2c/0x40
[177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.820][T2585409] ? exc_invalid_op+0x2d/0x40
[177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20
[177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs]
There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is
safe, AFAICS. Since the block group was in the unused list, the used bytes
should be 0 when it was added to the unused list. Then, it checks
block_group->{used,reserved,pinned} are still 0 under the
block_group->lock. So, they should be still eligible for the unused list,
not the reclaim list.
The reason it is safe there it's because because we're holding
space_info->groups_sem in write mode.
That means no other task can allocate from the block group, so while we
are at deleted_unused_bgs() it's not possible for other tasks to
allocate and deallocate extents from the block group, so it can't be
added to the unused list or the reclaim list by anyone else.
The bug can be reproduced by btrfs/166 after a few rounds. In practice
this can be hit when relocation cannot find more chunk space and ends
with ENOSPC.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Fixes: 4eb4e85c4f ("btrfs: retry block group reclaim without infinite loop")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=qpEp
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix quota root leak after quota disable failure
- fix condition when checking if a zone can be added as free
- allocate inode in NOFS context during logging or tree-log replay
- handle raid-stripe-tree lookup correctly during scrub
* tag 'for-6.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: qgroup: fix quota root leak after quota disable failure
btrfs: scrub: handle RST lookup error correctly
btrfs: zoned: fix initial free space detection
btrfs: use NOFS context when getting inodes during logging and log replay
If during the quota disable we fail when cleaning the quota tree or when
deleting the root from the root tree, we jump to the 'out' label without
ever dropping the reference on the quota root, resulting in a leak of the
root since fs_info->quota_root is no longer pointing to the root (we have
set it to NULL just before those steps).
Fix this by always doing a btrfs_put_root() call under the 'out' label.
This is a problem that exists since qgroups were first added in 2012 by
commit bed92eae26 ("Btrfs: qgroup implementation and prototypes"), but
back then we missed a kfree on the quota root and free_extent_buffer()
calls on its root and commit root nodes, since back then roots were not
yet reference counted.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running btrfs/060 with forced RST feature, it would crash the
following ASSERT() inside scrub_read_endio():
ASSERT(sector_nr < stripe->nr_sectors);
Before that, we would have tree dump from
btrfs_get_raid_extent_offset(), as we failed to find the RST entry for
the range.
[CAUSE]
Inside scrub_submit_extent_sector_read() every time we allocated a new
bbio we immediately called btrfs_map_block() to make sure there was some
RST range covering the scrub target.
But if btrfs_map_block() fails, we immediately call endio for the bbio,
while the bbio is newly allocated, it's completely empty.
Then inside scrub_read_endio(), we go through the bvecs to find
the sector number (as bi_sector is no longer reliable if the bio is
submitted to lower layers).
And since the bio is empty, such bvecs iteration would not find any
sector matching the sector, and return sector_nr == stripe->nr_sectors,
triggering the ASSERT().
[FIX]
Instead of calling btrfs_map_block() after allocating a new bbio, call
btrfs_map_block() first.
Since our only objective of calling btrfs_map_block() is only to update
stripe_len, there is really no need to do that after btrfs_alloc_bio().
This new timing would avoid the problem of handling empty bbio
completely, and in fact fixes a possible race window for the old code,
where if the submission thread is the only owner of the pending_io, the
scrub would never finish (since we didn't decrease the pending_io
counter).
Although the root cause of RST lookup failure still needs to be
addressed.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When creating a new block group, it calls btrfs_add_new_free_space() to add
the entire block group range into the free space accounting.
__btrfs_add_free_space_zoned() checks if size == block_group->length to
detect the initial free space adding, and proceed that case properly.
However, if the zone_capacity == zone_size and the over-write speed is fast
enough, the entire zone can be over-written within one transaction. That
confuses __btrfs_add_free_space_zoned() to handle it as an initial free
space accounting. As a result, that block group becomes a strange state: 0
used bytes, 0 zone_unusable bytes, but alloc_offset == zone_capacity (no
allocation anymore).
The initial free space accounting can properly be checked by checking
alloc_offset too.
Fixes: 98173255bd ("btrfs: zoned: calculate free space from zone capacity")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An atomic write is a write issued with torn-write protection, meaning
that for a power failure or any other hardware failure, all or none of the
data from the write will be stored, but never a mix of old and new data.
Userspace may add flag RWF_ATOMIC to pwritev2() to indicate that the
write is to be issued with torn-write prevention, according to special
alignment and length rules.
For any syscall interface utilizing struct iocb, add IOCB_ATOMIC for
iocb->ki_flags field to indicate the same.
A call to statx will give the relevant atomic write info for a file:
- atomic_write_unit_min
- atomic_write_unit_max
- atomic_write_segments_max
Both min and max values must be a power-of-2.
Applications can avail of atomic write feature by ensuring that the total
length of a write is a power-of-2 in size and also sized between
atomic_write_unit_min and atomic_write_unit_max, inclusive. Applications
must ensure that the write is at a naturally-aligned offset in the file
wrt the total write length. The value in atomic_write_segments_max
indicates the upper limit for IOV_ITER iovcnt.
Add file mode flag FMODE_CAN_ATOMIC_WRITE, so files which do not have the
flag set will have RWF_ATOMIC rejected and not just ignored.
Add a type argument to kiocb_set_rw_flags() to allows reads which have
RWF_ATOMIC set to be rejected.
Helper function generic_atomic_write_valid() can be used by FSes to verify
compliant writes. There we check for iov_iter type is for ubuf, which
implies iovcnt==1 for pwritev2(), which is an initial restriction for
atomic_write_segments_max. Initially the only user will be bdev file
operations write handler. We will rely on the block BIO submission path to
ensure write sizes are compliant for the bdev, so we don't need to check
atomic writes sizes yet.
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
jpg: merge into single patch and much rewrite
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If inc_block_group_ro systematically fails (e.g. due to ETXTBUSY from
swap) or btrfs_relocate_chunk systematically fails (from lack of
space), then this worker becomes an infinite loop.
At the very least, this strands the cleaner thread, but can also result
in hung tasks/RCU stalls on PREEMPT_NONE kernels and if the
reclaim_bgs_lock mutex is not contended.
I believe the best long term fix is to manage reclaim via work queue,
where we queue up a relocation on the triggering condition and re-queue
on failure. In the meantime, this is an easy fix to apply to avoid the
immediate pain.
Fixes: 7e27180994 ("btrfs: reinsert BGs failed to reclaim")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With 20 threads each walking a dedicated 1000 dirs * 1000 files
directory tree to stat(2) on a 32 core + 24GB ram vm:
before: 3.54s user 892.30s system 1966% cpu 45.549 total
after: 3.28s user 738.66s system 1955% cpu 37.932 total (-16.7%)
Benchmark can be found here: https://people.freebsd.org/~mjg/fstree.tgz
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240611173824.535995-3-mjguzik@gmail.com
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7rUb
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix handling of folio private changes.
The private value holds pointer to our extent buffer structure
representing a metadata range. Release and create of the range was
not properly synchronized when updating the private bit which ended
up in double folio_put, leading to all sorts of breakage
- fix a crash, reported as duplicate key in metadata, but caused by a
race of fsync and size extending write. Requires prealloc target
range + fsync and other conditions (log tree state, timing)
- fix leak of qgroup extent records after transaction abort
* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: protect folio::private when attaching extent buffer folios
btrfs: fix leak of qgroup extent records after transaction abort
btrfs: fix crash on racing fsync and size-extending write into prealloc
[BUG]
Since v6.8 there are rare kernel crashes reported by various people,
the common factor is bad page status error messages like this:
BUG: Bad page state in process kswapd0 pfn:d6e840
page: refcount:0 mapcount:0 mapping:000000007512f4f2 index:0x2796c2c7c
pfn:0xd6e840
aops:btree_aops ino:1
flags: 0x17ffffe0000008(uptodate|node=0|zone=2|lastcpupid=0x3fffff)
page_type: 0xffffffff()
raw: 0017ffffe0000008 dead000000000100 dead000000000122 ffff88826d0be4c0
raw: 00000002796c2c7c 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: non-NULL mapping
[CAUSE]
Commit 09e6cef19c ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") changes the sequence when allocating a new
extent buffer.
Previously we always called grab_extent_buffer() under
mapping->i_private_lock, to ensure the safety on modification on
folio::private (which is a pointer to extent buffer for regular
sectorsize).
This can lead to the following race:
Thread A is trying to allocate an extent buffer at bytenr X, with 4
4K pages, meanwhile thread B is trying to release the page at X + 4K
(the second page of the extent buffer at X).
Thread A | Thread B
-----------------------------------+-------------------------------------
| btree_release_folio()
| | This is for the page at X + 4K,
| | Not page X.
| |
alloc_extent_buffer() | |- release_extent_buffer()
|- filemap_add_folio() for the | | |- atomic_dec_and_test(eb->refs)
| page at bytenr X (the first | | |
| page). | | |
| Which returned -EEXIST. | | |
| | | |
|- filemap_lock_folio() | | |
| Returned the first page locked. | | |
| | | |
|- grab_extent_buffer() | | |
| |- atomic_inc_not_zero() | | |
| | Returned false | | |
| |- folio_detach_private() | | |- folio_detach_private() for X
| |- folio_test_private() | | |- folio_test_private()
| Returned true | | | Returned true
|- folio_put() | |- folio_put()
Now there are two puts on the same folio at folio X, leading to refcount
underflow of the folio X, and eventually causing the BUG_ON() on the
page->mapping.
The condition is not that easy to hit:
- The release must be triggered for the middle page of an eb
If the release is on the same first page of an eb, page lock would kick
in and prevent the race.
- folio_detach_private() has a very small race window
It's only between folio_test_private() and folio_clear_private().
That's exactly when mapping->i_private_lock is used to prevent such race,
and commit 09e6cef19c ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") screwed that up.
At that time, I thought the page lock would kick in as
filemap_release_folio() also requires the page to be locked, but forgot
the filemap_release_folio() only locks one page, not all pages of an
extent buffer.
[FIX]
Move all the code requiring i_private_lock into
attach_eb_folio_to_filemap(), so that everything is done with proper
lock protection.
Furthermore to prevent future problems, add an extra
lockdep_assert_locked() to ensure we're holding the proper lock.
To reproducer that is able to hit the race (takes a few minutes with
instrumented code inserting delays to alloc_extent_buffer()):
#!/bin/sh
drop_caches () {
while(true); do
echo 3 > /proc/sys/vm/drop_caches
echo 1 > /proc/sys/vm/compact_memory
done
}
run_tar () {
while(true); do
for x in `seq 1 80` ; do
tar cf /dev/zero /mnt > /dev/null &
done
wait
done
}
mkfs.btrfs -f -d single -m single /dev/vda
mount -o noatime /dev/vda /mnt
# create 200,000 files, 1K each
./simoop -n 200000 -E -f 1k /mnt
drop_caches &
(run_tar)
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-btrfs/CAHk-=wgt362nGfScVOOii8cgKn2LVVHeOvOA7OBwg1OwbuJQcw@mail.gmail.com/
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/lkml/CABXGCsPktcHQOvKTbPaTwegMExije=Gpgci5NW=hqORo-s7diA@mail.gmail.com/
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lore.kernel.org/linux-btrfs/e8b3311c-9a75-4903-907f-fc0f7a3fe423@gmx.de/
Reported-by: syzbot+f80b066392366b4af85e@syzkaller.appspotmail.com
Fixes: 09e6cef19c ("btrfs: refactor alloc_extent_buffer() to allocate-then-attach method")
CC: stable@vger.kernel.org # 6.8+
CC: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=q3Ic
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix for fast fsync that needs to handle errors during writes after
some COW failure so it does not lead to an inconsistent state"
* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ensure fast fsync waits for ordered extents after a write failure
Qgroup extent records are created when delayed ref heads are created and
then released after accounting extents at btrfs_qgroup_account_extents(),
called during the transaction commit path.
If a transaction is aborted we free the qgroup records by calling
btrfs_qgroup_destroy_extent_records() at btrfs_destroy_delayed_refs(),
unless we don't have delayed references. We are incorrectly assuming
that no delayed references means we don't have qgroup extents records.
We can currently have no delayed references because we ran them all
during a transaction commit and the transaction was aborted after that
due to some error in the commit path.
So fix this by ensuring we btrfs_qgroup_destroy_extent_records() at
btrfs_destroy_delayed_refs() even if we don't have any delayed references.
Reported-by: syzbot+0fecc032fa134afd49df@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/0000000000004e7f980619f91835@google.com/
Fixes: 81f7eb00ff ("btrfs: destroy qgroup extent records on transaction abort")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have been seeing crashes on duplicate keys in
btrfs_set_item_key_safe():
BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.c:2620!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs]
With the following stack trace:
#0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4)
#1 btrfs_drop_extents (fs/btrfs/file.c:411:4)
#2 log_one_extent (fs/btrfs/tree-log.c:4732:9)
#3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9)
#4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9)
#5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8)
#6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8)
#7 btrfs_sync_file (fs/btrfs/file.c:1933:8)
#8 vfs_fsync_range (fs/sync.c:188:9)
#9 vfs_fsync (fs/sync.c:202:9)
#10 do_fsync (fs/sync.c:212:9)
#11 __do_sys_fdatasync (fs/sync.c:225:9)
#12 __se_sys_fdatasync (fs/sync.c:223:1)
#13 __x64_sys_fdatasync (fs/sync.c:223:1)
#14 do_syscall_x64 (arch/x86/entry/common.c:52:14)
#15 do_syscall_64 (arch/x86/entry/common.c:83:7)
#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121)
So we're logging a changed extent from fsync, which is splitting an
extent in the log tree. But this split part already exists in the tree,
triggering the BUG().
This is the state of the log tree at the time of the crash, dumped with
drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py)
to get more details than btrfs_print_leaf() gives us:
>>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"])
leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610
leaf 33439744 flags 0x100000000000000
fs uuid e5bd3946-400c-4223-8923-190ef1f18677
chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 7 transid 9 size 8192 nbytes 8473563889606862198
block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
sequence 204 flags 0x10(PREALLOC)
atime 1716417703.220000000 (2024-05-22 15:41:43)
ctime 1716417704.983333333 (2024-05-22 15:41:44)
mtime 1716417704.983333333 (2024-05-22 15:41:44)
otime 17592186044416.000000000 (559444-03-08 01:40:16)
item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13
index 195 namelen 3 name: 193
item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37
location key (0 UNKNOWN.0 0) type XATTR
transid 7 data_len 1 name_len 6
name: user.a
data a
item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 303144960 nr 12288
extent data offset 0 nr 4096 ram 12288
extent compression 0 (none)
item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53
generation 9 type 2 (prealloc)
prealloc data disk byte 303144960 nr 12288
prealloc data offset 4096 nr 8192
item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53
generation 9 type 2 (prealloc)
prealloc data disk byte 303144960 nr 12288
prealloc data offset 8192 nr 4096
...
So the real problem happened earlier: notice that items 4 (4k-12k) and 5
(8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and
item 5 starts at i_size.
Here is the state of the filesystem tree at the time of the crash:
>>> root = prog.crashed_thread().stack_trace()[2]["inode"].root
>>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0))
>>> print_extent_buffer(nodes[0])
leaf 30425088 level 0 items 184 generation 9 owner 5
leaf 30425088 flags 0x100000000000000
fs uuid e5bd3946-400c-4223-8923-190ef1f18677
chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
...
item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160
generation 7 transid 7 size 4096 nbytes 12288
block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
sequence 6 flags 0x10(PREALLOC)
atime 1716417703.220000000 (2024-05-22 15:41:43)
ctime 1716417703.220000000 (2024-05-22 15:41:43)
mtime 1716417703.220000000 (2024-05-22 15:41:43)
otime 1716417703.220000000 (2024-05-22 15:41:43)
item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13
index 195 namelen 3 name: 193
item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37
location key (0 UNKNOWN.0 0) type XATTR
transid 7 data_len 1 name_len 6
name: user.a
data a
item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 303144960 nr 12288
extent data offset 0 nr 8192 ram 12288
extent compression 0 (none)
item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53
generation 9 type 2 (prealloc)
prealloc data disk byte 303144960 nr 12288
prealloc data offset 8192 nr 4096
Item 5 in the log tree corresponds to item 183 in the filesystem tree,
but nothing matches item 4. Furthermore, item 183 is the last item in
the leaf.
btrfs_log_prealloc_extents() is responsible for logging prealloc extents
beyond i_size. It first truncates any previously logged prealloc extents
that start beyond i_size. Then, it walks the filesystem tree and copies
the prealloc extent items to the log tree.
If it hits the end of a leaf, then it calls btrfs_next_leaf(), which
unlocks the tree and does another search. However, while the filesystem
tree is unlocked, an ordered extent completion may modify the tree. In
particular, it may insert an extent item that overlaps with an extent
item that was already copied to the log tree.
This may manifest in several ways depending on the exact scenario,
including an EEXIST error that is silently translated to a full sync,
overlapping items in the log tree, or this crash. This particular crash
is triggered by the following sequence of events:
- Initially, the file has i_size=4k, a regular extent from 0-4k, and a
prealloc extent beyond i_size from 4k-12k. The prealloc extent item is
the last item in its B-tree leaf.
- The file is fsync'd, which copies its inode item and both extent items
to the log tree.
- An xattr is set on the file, which sets the
BTRFS_INODE_COPY_EVERYTHING flag.
- The range 4k-8k in the file is written using direct I/O. i_size is
extended to 8k, but the ordered extent is still in flight.
- The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this
calls copy_inode_items_to_log(), which calls
btrfs_log_prealloc_extents().
- btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the
filesystem tree. Since it starts before i_size, it skips it. Since it
is the last item in its B-tree leaf, it calls btrfs_next_leaf().
- btrfs_next_leaf() unlocks the path.
- The ordered extent completion runs, which converts the 4k-8k part of
the prealloc extent to written and inserts the remaining prealloc part
from 8k-12k.
- btrfs_next_leaf() does a search and finds the new prealloc extent
8k-12k.
- btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into
the log tree. Note that it overlaps with the 4k-12k prealloc extent
that was copied to the log tree by the first fsync.
- fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k
extent that was written.
- This tries to drop the range 4k-8k in the log tree, which requires
adjusting the start of the 4k-12k prealloc extent in the log tree to
8k.
- btrfs_set_item_key_safe() sees that there is already an extent
starting at 8k in the log tree and calls BUG().
Fix this by detecting when we're about to insert an overlapping file
extent item in the log tree and truncating the part that would overlap.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a write path in COW mode fails, either before submitting a bio for the
new extents or an actual IO error happens, we can end up allowing a fast
fsync to log file extent items that point to unwritten extents.
This is because dropping the extent maps happens when completing ordered
extents, at btrfs_finish_one_ordered(), and the completion of an ordered
extent is executed in a work queue.
This can result in a fast fsync to start logging file extent items based
on existing extent maps before the ordered extents complete, therefore
resulting in a log that has file extent items that point to unwritten
extents, resulting in a corrupt file if a crash happens after and the log
tree is replayed the next time the fs is mounted.
This can happen for both direct IO writes and buffered writes.
For example consider a direct IO write, in COW mode, that fails at
btrfs_dio_submit_io() because btrfs_extract_ordered_extent() returned an
error:
1) We call btrfs_finish_ordered_extent() with the 'uptodate' parameter
set to false, meaning an error happened;
2) That results in marking the ordered extent with the BTRFS_ORDERED_IOERR
flag;
3) btrfs_finish_ordered_extent() queues the completion of the ordered
extent - so that btrfs_finish_one_ordered() will be executed later in
a work queue. That function will drop extent maps in the range when
it's executed, since the extent maps point to unwritten locations
(signaled by the BTRFS_ORDERED_IOERR flag);
4) After calling btrfs_finish_ordered_extent() we keep going down the
write path and unlock the inode;
5) After that a fast fsync starts and locks the inode;
6) Before the work queue executes btrfs_finish_one_ordered(), the fsync
task sees the extent maps that point to the unwritten locations and
logs file extent items based on them - it does not know they are
unwritten, and the fast fsync path does not wait for ordered extents
to complete, which is an intentional behaviour in order to reduce
latency.
For the buffered write case, here's one example:
1) A fast fsync begins, and it starts by flushing delalloc and waiting for
the writeback to complete by calling filemap_fdatawait_range();
2) Flushing the dellaloc created a new extent map X;
3) During the writeback some IO error happened, and at the end io callback
(end_bbio_data_write()) we call btrfs_finish_ordered_extent(), which
sets the BTRFS_ORDERED_IOERR flag in the ordered extent and queues its
completion;
4) After queuing the ordered extent completion, the end io callback clears
the writeback flag from all pages (or folios), and from that moment the
fast fsync can proceed;
5) The fast fsync proceeds sees extent map X and logs a file extent item
based on extent map X, resulting in a log that points to an unwritten
data extent - because the ordered extent completion hasn't run yet, it
happens only after the logging.
To fix this make btrfs_finish_ordered_extent() set the inode flag
BTRFS_INODE_NEEDS_FULL_SYNC in case an error happened for a COW write,
so that a fast fsync will wait for ordered extent completion.
Note that this issues of using extent maps that point to unwritten
locations can not happen for reads, because in read paths we start by
locking the extent range and wait for any ordered extents in the range
to complete before looking for extent maps.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=XR4r
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs updates from David Sterba:
"A few more updates, mostly stability fixes or user visible changes:
- fix race in zoned mode during device replace that can lead to
use-after-free
- update return codes and lower message levels for quota rescan where
it's causing false alerts
- fix unexpected qgroup id reuse under some conditions
- fix condition when looking up extent refs
- add option norecovery (removed in 6.8), the intended replacements
haven't been used and some aplications still rely on the old one
- build warning fixes"
* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: re-introduce 'norecovery' mount option
btrfs: fix end of tree detection when searching for data extent ref
btrfs: scrub: initialize ret in scrub_simple_mirror() to fix compilation warning
btrfs: zoned: fix use-after-free due to race with dev replace
btrfs: qgroup: fix qgroup id collision across mounts
btrfs: qgroup: update rescan message levels and error codes
Replacement of bdev->bd_inode with sane(r) set of primitives.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkwjlgAKCRBZ7Krx/gZQ
66OmAP9nhZLASn/iM2+979I6O0GW+vid+uLh48uW3d+LbsmVIgD9GYpR+cuLQ/xj
mJESWfYKOVSpFFSrqlzKg9PQlU/GFgs=
=6LRp
-----END PGP SIGNATURE-----
Merge tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bdev bd_inode updates from Al Viro:
"Replacement of bdev->bd_inode with sane(r) set of primitives by me and
Yu Kuai"
* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RIP ->bd_inode
dasd_format(): killing the last remaining user of ->bd_inode
nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
block/bdev.c: use the knowledge of inode/bdev coallocation
gfs2: more obvious initializations of mapping->host
fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
grow_dev_folio(): we only want ->bd_inode->i_mapping there
use ->bd_mapping instead of ->bd_inode->i_mapping
block_device: add a pointer to struct address_space (page cache of bdev)
missing helpers: bdev_unhash(), bdev_drop()
block: move two helpers into bdev.c
block2mtd: prevent direct access of bd_inode
dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
blkdev_write_iter(): saner way to get inode and bdev
bcachefs: remove dead function bdev_sectors()
ext4: remove block_device_ejected()
erofs_buf: store address_space instead of inode
erofs: switch erofs_bread() to passing offset instead of block number
to struct file * and verifying that caller has device
opened exclusively.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkwkfQAKCRBZ7Krx/gZQ
62C3AQDW5vuXNx2+KDPma5YStjFpPLC0xtSyAS5D3YANjtyRFgD/TOcCarq7rvBt
KubxHVFsfW+eu6ASeaoMRB83w5OIzwk=
=Liix
-----END PGP SIGNATURE-----
Merge tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs blocksize updates from Al Viro:
"This gets rid of bogus set_blocksize() uses, switches it over
to be based on a 'struct file *' and verifies that the caller
has the device opened exclusively"
* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make set_blocksize() fail unless block device is opened exclusive
set_blocksize(): switch to passing struct file *
btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
swsusp: don't bother with setting block size
zram: don't bother with reopening - just use O_EXCL for open
swapon(2): open swap with O_EXCL
swapon(2)/swapoff(2): don't bother with block size
pktcdvd: sort set_blocksize() calls out
bcache_register(): don't bother with set_blocksize()
Although 'norecovery' mount option was marked as deprecated for a long
time and a warning message was printed during the deprecation window,
it's still actively utilized by several projects that need a safer way
to mount a btrfs without any writes.
Furthermore this 'norecovery' mount option is supported by other major
filesystems, which makes it less clear what's our motivation to remove
it.
Re-introduce the 'norecovery' mount option, and output a message to recommend
'rescue=nologreplay' option.
Link: https://lore.kernel.org/linux-btrfs/ZkxZT0J-z0GYvfy8@gardel-login/#t
Link: https://github.com/systemd/systemd/pull/32892
Link: https://bugzilla.suse.com/show_bug.cgi?id=1222429
Reported-by: Lennart Poettering <lennart@poettering.net>
Reported-by: Jiri Slaby <jslaby@suse.com>
Fixes: a1912f7121 ("btrfs: remove code for inode_cache and recovery mount options")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At lookup_extent_data_ref() we are incorrectly checking if we are at the
last slot of the last leaf in the extent tree. We are returning -ENOENT
if btrfs_next_leaf() returns a value greater than 1, but btrfs_next_leaf()
never returns anything greater than 1:
1) It returns < 0 on error;
2) 0 if there is a next leaf (or a new item was added to the end of the
current leaf after releasing the path);
3) 1 if there are no more leaves (and no new items were added to the last
leaf after releasing the path).
So fix this by checking if the return value is greater than zero instead
of being greater than one.
Fixes: 1618aa3c2e ("btrfs: simplify return variables in lookup_extent_data_ref()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following error message is displayed:
../fs/btrfs/scrub.c:2152:9: error: ‘ret’ may be used uninitialized
in this function [-Werror=maybe-uninitialized]"
Compiler version: gcc version: (Debian 10.2.1-6) 10.2.1 20210110
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While loading a zone's info during creation of a block group, we can race
with a device replace operation and then trigger a use-after-free on the
device that was just replaced (source device of the replace operation).
This happens because at btrfs_load_zone_info() we extract a device from
the chunk map into a local variable and then use the device while not
under the protection of the device replace rwsem. So if there's a device
replace operation happening when we extract the device and that device
is the source of the replace operation, we will trigger a use-after-free
if before we finish using the device the replace operation finishes and
frees the device.
Fix this by enlarging the critical section under the protection of the
device replace rwsem so that all uses of the device are done inside the
critical section.
CC: stable@vger.kernel.org # 6.1.x: 15c12fcc50: btrfs: zoned: introduce a zone_info struct in btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 09a46725cc: btrfs: zoned: factor out per-zone logic from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 9e0e3e74dc: btrfs: zoned: factor out single bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 87463f7e02: btrfs: zoned: factor out DUP bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we delete subvolumes whose ID is the largest in the filesystem, then
unmount and mount again, then btrfs_init_root_free_objectid on the
tree_root will select a subvolid smaller than that one and thus allow
reusing it.
If we are also using qgroups (and particularly squotas) it is possible
to delete the subvol without deleting the qgroup. In that case, we will
be able to create a new subvol whose id already has a level 0 qgroup.
This will result in re-using that qgroup which would then lead to
incorrect accounting.
Fixes: 6ed05643dd ("btrfs: create qgroup earlier in snapshot creation")
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
On filesystems without enabled quotas there's still a warning message in
the logs when rescan is called. In that case it's not a problem that
should be reported, rescan can be called unconditionally. Change the
error code to ENOTCONN which is used for 'quotas not enabled' elsewhere.
Remove message (also a warning) when rescan is called during an ongoing
rescan, this brings no useful information and the error code is
sufficient.
Change message levels to debug for now, they can be removed eventually.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
-----BEGIN PGP SIGNATURE-----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=MMpE
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This update brings a few minor performance improvements, otherwise
there's a lot of refactoring, cleanups and other sort of not user
visible changes.
Performance improvements:
- inline b-tree locking functions, improvement in metadata-heavy
changes
- relax locking on a range that's being reflinked, allows read
operations to run in parallel
- speed up NOCOW write checks (throughput +9% on a sample test)
- extent locking ranges have been reduced in several places, namely
around delayed ref processing
Core:
- more page to folio conversions:
- relocation
- send
- compression
- inline extent handling
- super block write and wait
- extent_map structure optimizations:
- reduced structure size
- code simplifications
- add shrinker for allocated objects, the numbers can go high and
could exhaust memory on smaller systems (reported) as they may
not get an opportunity to be freed fast enough
- extent locking optimizations:
- reduce locking ranges where it does not seem to be necessary and
are safe due to other means of synchronization
- potential improvements due to lower contention,
allocation/freeing and state management operations of extent
state tracking structures
- delayed ref cleanups and simplifications
- updated trace points
- improved error handling, warnings and assertions
- cleanups and refactoring, unification of error handling paths"
* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (122 commits)
btrfs: qgroup: fix initialization of auto inherit array
btrfs: count super block write errors in device instead of tracking folio error state
btrfs: use the folio iterator in btrfs_end_super_write()
btrfs: convert super block writes to folio in write_dev_supers()
btrfs: convert super block writes to folio in wait_dev_supers()
bio: Export bio_add_folio_nofail to modules
btrfs: remove duplicate included header from fs.h
btrfs: add a cached state to extent_clear_unlock_delalloc
btrfs: push extent lock down in submit_one_async_extent
btrfs: push lock_extent down in cow_file_range()
btrfs: move can_cow_file_range_inline() outside of the extent lock
btrfs: push lock_extent into cow_file_range_inline
btrfs: push extent lock into cow_file_range
btrfs: push extent lock into run_delalloc_cow
btrfs: remove unlock_extent from run_delalloc_compressed
btrfs: push extent lock down in run_delalloc_nocow
btrfs: adjust while loop condition in run_delalloc_nocow
btrfs: push extent lock into run_delalloc_nocow
btrfs: push the extent lock into btrfs_run_delalloc_range
btrfs: lock extent when doing inline extent in compression
...
-----BEGIN PGP SIGNATURE-----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=HnjE
-----END PGP SIGNATURE-----
Merge tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- Add a partscan attribute in sysfs, fixing an issue with systemd
relying on an internal interface that went away.
- Attempt #2 at making long running discards interruptible. The
previous attempt went into 6.9, but we ended up mostly reverting it
as it had issues.
- Remove old ida_simple API in bcache
- Support for zoned write plugging, greatly improving the performance
on zoned devices.
- Remove the old throttle low interface, which has been experimental
since 2017 and never made it beyond that and isn't being used.
- Remove page->index debugging checks in brd, as it hasn't caught
anything and prepares us for removing in struct page.
- MD pull request from Song
- Don't schedule block workers on isolated CPUs
* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
blk-throttle: delay initialization until configuration
blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
block: fix that util can be greater than 100%
block: support to account io_ticks precisely
block: add plug while submitting IO
bcache: fix variable length array abuse in btree_iter
bcache: Remove usage of the deprecated ida_simple_xx() API
md: Revert "md: Fix overflow in is_mddev_idle"
blk-lib: check for kill signal in ioctl BLKDISCARD
block: add a bio_await_chain helper
block: add a blk_alloc_discard_bio helper
block: add a bio_chain_and_submit helper
block: move discard checks into the ioctl handler
block: remove the discard_granularity check in __blkdev_issue_discard
block/ioctl: prefer different overflow check
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
block: fix and simplify blkdevparts= cmdline parsing
block: refine the EOF check in blkdev_iomap_begin
block: add a partscan sysfs attribute for disks
block: add a disk_has_partscan helper
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZj3HuwAKCRCRxhvAZXjc
orYvAQCZOr68uJaEaXAArYTdnMdQ6HIzG+FVlwrqtrhz0BV07wEAqgmtSR9XKh+L
0+DNepg4R8PZOHH371eSSsLNRCUCkAs=
=SVsU
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Free up FMODE_* bits. I've freed up bits 6, 7, 8, and 24. That
means we now have six free FMODE_* bits in total (but bit #6
already got used for FMODE_WRITE_RESTRICTED)
- Add FOP_HUGE_PAGES flag (follow-up to FMODE_* cleanup)
- Add fd_raw cleanup class so we can make use of automatic cleanup
provided by CLASS(fd_raw, f)(fd) for O_PATH fds as well
- Optimize seq_puts()
- Simplify __seq_puts()
- Add new anon_inode_getfile_fmode() api to allow specifying f_mode
instead of open-coding it in multiple places
- Annotate struct file_handle with __counted_by() and use
struct_size()
- Warn in get_file() whether f_count resurrection from zero is
attempted (epoll/drm discussion)
- Folio-sophize aio
- Export the subvolume id in statx() for both btrfs and bcachefs
- Relax linkat(AT_EMPTY_PATH) requirements
- Add F_DUPFD_QUERY fcntl() allowing to compare two file descriptors
for dup*() equality replacing kcmp()
Cleanups:
- Compile out swapfile inode checks when swap isn't enabled
- Use (1 << n) notation for FMODE_* bitshifts for clarity
- Remove redundant variable assignment in fs/direct-io
- Cleanup uses of strncpy in orangefs
- Speed up and cleanup writeback
- Move fsparam_string_empty() helper into header since it's currently
open-coded in multiple places
- Add kernel-doc comments to proc_create_net_data_write()
- Don't needlessly read dentry->d_flags twice
Fixes:
- Fix out-of-range warning in nilfs2
- Fix ecryptfs overflow due to wrong encryption packet size
calculation
- Fix overly long line in xfs file_operations (follow-up to FMODE_*
cleanup)
- Don't raise FOP_BUFFER_{R,W}ASYNC for directories in xfs (follow-up
to FMODE_* cleanup)
- Don't call xfs_file_open from xfs_dir_open (follow-up to FMODE_*
cleanup)
- Fix stable offset api to prevent endless loops
- Fix afs file server rotations
- Prevent xattr node from overflowing the eraseblock in jffs2
- Move fdinfo PTRACE_MODE_READ procfs check into the .permission()
operation instead of .open() operation since this caused userspace
regressions"
* tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
afs: Fix fileserver rotation getting stuck
selftests: add F_DUPDFD_QUERY selftests
fcntl: add F_DUPFD_QUERY fcntl()
file: add fd_raw cleanup class
fs: WARN when f_count resurrection is attempted
seq_file: Simplify __seq_puts()
seq_file: Optimize seq_puts()
proc: Move fdinfo PTRACE_MODE_READ check into the inode .permission operation
fs: Create anon_inode_getfile_fmode()
xfs: don't call xfs_file_open from xfs_dir_open
xfs: drop fop_flags for directories
xfs: fix overly long line in the file_operations
shmem: Fix shmem_rename2()
libfs: Add simple_offset_rename() API
libfs: Fix simple_offset_rename_exchange()
jffs2: prevent xattr node from overflowing the eraseblock
vfs, swap: compile out IS_SWAPFILE() on swapless configs
vfs: relax linkat() AT_EMPTY_PATH - aka flink() - requirements
fs/direct-io: remove redundant assignment to variable retval
fs/dcache: Re-use value stored to dentry->d_flags instead of re-reading
...
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfba ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5f ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "i++" was accidentally left out so it just sets qgids[0] over and
over.
This can lead to unexpected problems, as the groups[1:] would be all 0,
leading to later find_qgroup_rb() unable to find a qgroup and cause
snapshot creation failure.
Fixes: 5343cd9364 ("btrfs: qgroup: simple quota auto hierarchy for nested subvolumes")
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the error status of super block write is tracked in page/folio
status bit Error. For that we need to keep the reference for the whole
duration of write and wait.
Count the number of superblock writeback errors in the btrfs_device.
That means we don't need the folio to stay around until it's waited for,
and can avoid the extra call to folio_get/put.
Also remove a mention of PageError in a comment as it's the last mention
of the page Error state.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Iterate over folios instead of bvecs. Switch the order of unlock and put
to be the usual order; we know this folio can't be put until it's been
waited for, but that's fragile. Remove the calls to ClearPageUptodate /
SetPageUptodate -- if PAGE_SIZE is larger than BTRFS_SUPER_INFO_SIZE,
we'd be marking the entire folio uptodate without having actually
initialised all the bytes in the page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a direct conversion from pages to folios, assuming single page
folio. Also removes some calls to obsolete APIs and some hidden calls to
compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a direct conversion from pages to folios, assuming single page
folio. Also removes a few calls to compound_head() and calls to
obsolete APIs.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have the lock_extent tightly coupled with
extent_clear_unlock_delalloc we can add a cached state to
extent_clear_unlock_delalloc and benefit from skipping the extra lookup
when we're doing cow.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to include the time we spend in the allocator under our
extent lock protection, move it after the allocator and make sure we
lock the extent in the error case to ensure we're not clearing these
bits without the extent lock held.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've got the extent lock pushed into cow_file_range() we can
push it further down into the allocation loop. This allows us to only
hold the extent lock during the dropping of the extent map range and
inserting the ordered extent.
This makes the error case a little trickier as we'll now have to lock
the range before clearing any of the other extent bits for the range,
but this is the error path so is less performance critical.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These checks aren't reliant on the extent lock. Move this up into
cow_file_range_inline(), and then update encoded writes to call this
check before calling __cow_file_range_inline(). This will allow us to
skip the extent lock if we're not able to inline the given extent.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we've pushed the lock_extent() into cow_file_range() we can
push the extent locking into cow_file_range_inline() and move the
lock_extent in cow_file_range() to after we call
cow_file_range_inline().
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that cow_file_range is the only function that is called with the
range locked, push this call into cow_file_range so we can further
narrow the scope.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used by zoned but also as the fallback for uncompressed extents
when we fail to compress the ranges. Push the extent lock into
run_dealloc_cow(), and adjust the compression case to take the extent
lock after calling run_delalloc_cow().
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we immediately unlock the extent range when we enter
run_delalloc_compressed() simply move the lock_extent() down to cover
cow_file_range() and then remove the unlock_extent() from
run_delalloc_compressed.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
run_delalloc_nocow is a little special because we use the file extents
to see if we can nocow a range. We don't actually need the protection
of the extent lock to look at the file extents at this point however.
We are currently holding the page lock for this range, so we are
protected from anybody who would simultaneously be modifying the file
extent items for this range.
* mmap() - we're holding the page lock.
* buffered writes - we're holding the page lock.
* direct writes - we're holding the page lock and direct IO has to flush
page cache before it's able to continue.
* fallocate() - all callers flush the range and wait on ordered extents
while holding the inode lock and the mmap lock, so we are again saved
by the page lock.
We want to use the extent lock to protect
1) The mapping tree for the given range.
2) The ordered extents for the given range.
3) The io_tree for the given range.
Push the extent lock down to cover these operations. In the
fallback_to_cow() case we simply lock before doing anything and rely on
the cow_file_range() helper to handle it's range properly.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have the following pattern
while (1) {
if (cur_offset > end)
break;
}
Which is just
while (cur_offset <= end) {
...
}
so adjust the code to be more clear.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
run_delalloc_nocow is a bit special as it walks through the file extents
for the inode and determines what it can nocow and what it can't. This
is the more complicated area for extent locking, so start with this
function.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to limit the scope of the extent lock to be around operations
that can change in flight. Currently we hold the extent lock through
the entire writepage operation, which isn't really necessary.
We want to protect to make sure nobody has updated DELALLOC. In
find_lock_delalloc_range we must lock the range in order to validate the
contents of our io_tree. However once we've done that we're safe to
unlock the range and continue, as we have the page lock already held for
the range.
We are protected from all operations at this point.
* mmap() - we're holding the page lock, thus are protected.
* buffered writes - again, we're protected because we take the page lock
for the first and last page in our range for buffered writes so we
won't create new delalloc ranges in this area.
* direct IO - we invalidate pagecache before attempting to write a new
area, which requires the page lock, so again are protected once we're
holding the page lock on this range.
Additionally this behavior actually already exists for compressed, we
unlock the range as soon as we start to process the async extents, and
re-lock it during compression. So this is completely safe, and makes
the locking more consistent.
Make this simple by just pushing the extent lock into
btrfs_run_delalloc_range. From there followup patches will push the
lock further down into its users.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently don't lock the extent when we're doing a
cow_file_range_inline() for a compressed extent. This isn't a problem
necessarily, but it's inconsistent with the rest of our usage of
cow_file_range_inline(). This also leads to some extra weird logic
around whether the extent is locked or not. Fix this to lock the extent
before calling cow_file_range_inline() in compression to make it
consistent with the rest of the inline users. In future patches this
will be pushed down into the cow_file_range_inline() helper, so we're
fine with the quick and dirty locking here. This patch exists to make
the behavior change obvious.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We duplicate the extent cleanup for cow_file_range_inline() in the cow
and compressed case. The encoded case doesn't need to do cleanup the
same way, so rename cow_file_range_inline to __cow_file_range_inline and
then make cow_file_range_inline handle the extent cleanup appropriately,
and update the callers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since 4750af3bbe ("btrfs: prevent extent_clear_unlock_delalloc() to
unlock page not locked by __process_pages_contig()") we have been
unlocking the locked page manually instead of via
extent_clear_unlock_delalloc() because of subpage blocksize support.
However we actually disable inline extent creation for subpage blocksize
support, so this behavior isn't necessary. Remove this code and
comment, if at some point the subpage blocksize code grows support for
inline extents this can be re-evaluated.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have a lot of duplicated checks of
if (start == 0 && fs_info->sectorsize == PAGE_SIZE)
cow_file_range_inline();
Instead of duplicating this check everywhere, consolidate all of the
inline extent logic into a helper which documents all of the checks and
then use that helper inside of cow_file_range_inline(). With this we
can clean up all of the calls to either unconditionally call
cow_file_range_inline(), or at least reduce the checks we're doing
before we call cow_file_range_inline();
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the cow path we will clone the reloc csums for relocated data
extents, and if there's an error we already have an ordered extent and
rely on the ordered extent finishing to clean everything up.
There's a problem however, we don't mark the ordered extent with an
error, we pretend like everything was just fine. If we were at the end
of our range we won't actually bubble up this error anywhere, and we
could end up inserting an extent that doesn't have csums where it should
have them.
Fix this by adding a helper to mark the ordered extent with an error,
and then use this when we fail to lookup the csums in
btrfs_reloc_clone_csums. Use this helper in the other place where we
use the same pattern while we're here.
This will prevent us from erroneously inserting the extent that doesn't
have the required checksums.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function create_io_em() is called before we submit an IO, to update
the in-memory extent map for the involved range.
This patch changes the following aspects:
- Does not allow BTRFS_ORDERED_NOCOW type
For real NOCOW (excluding NOCOW writes into preallocated ranges)
writes, we never call create_io_em(), as we does not need to update
the extent map at all.
So remove the sanity check allowing BTRFS_ORDERED_NOCOW type.
- Add extra sanity checks
* PREALLOC
- @block_len == len
For uncompressed writes.
* REGULAR
- @block_len == @orig_block_len == @ram_bytes == @len
We're creating a new uncompressed extent, and referring all of it.
- @orig_start == @start
We haven no offset inside the extent.
* COMPRESSED
- valid @compress_type
- @len <= @ram_bytes
This is to co-operate with encoded writes, which can cause a new
file extent referring only part of a uncompressed extent.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the tree-checker ensuring all inline file extents starts at file
offset 0 and has a length no larger than sectorsize, we can simplify the
calculation to assigned those fixes values directly.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent_map structure is very critical to btrfs, as it is involved
for both read and write paths.
Unfortunately the structure is not properly explained, making it pretty
hard to understand nor to do further improvement.
This patch adds extra comments explaining the major members based on my
code reading. Hopefully we can find more members to cleanup in the
future.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
calcu_metadata_size() has a "reserve" argument, but the only caller always
set it to "1". The other usage (reserve = 0) is dropped by a commit
0647bf564f ("Btrfs: improve forever loop when doing balance relocation"),
which is more than 10 years ago. Drop the argument and simplify the code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's another return variable wret that is only passed to ret on
error, we can simply use ret.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
First, drop err instead reuse ret, choose to return the error instead of
goto fail and then return the same error. Do not initialize the ret
until where it has to be initialized. Slight logic change in handling
the btrfs_search_slot() and btrfs_next_leaf() return value.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename ret to ret2 compile and then err to ret. Also, new ret2 is found
to be localized within the 'if (trans)' statement, so move its
declaration there.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In quick_update_accounting() err is used as 2nd return value, which could
be achieved just with ret.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Coding style fixes the function relocate_tree_blocks(). After the fix,
ret is the return value variable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Code style fix in the function build_backref_tree(). Drop the ret
initialization 0, as we don't need it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename the function's local return variables err and werr to ret.
Also, align the variable declarations with the other declarations in
the function for better function space alignment.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename the function's local variable werr and err to ret.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the function btrfs_write_marked_extents() and in __btrfs_wait_marked_extents()
return the actual error if when filemap_fdata<write|wait>_range() fails.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are open coded tests of BTRFS_FS_STATE_DUMMY_FS_INFO and we have a
wrapper for that that's a compile-time constant when self-tests are not
built in. As this is only for development we can save some bytes and
conditions on release configs by using the helper in the remaining
cases.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to initialize the delayed inodes xarray with a GFP_ATOMIC
flag because that actually does nothing on the xarray operations. That was
needed for radix trees, but for xarrays the allocation flags are passed as
the last argument to xa_store() (which we are using correctly).
So initialize the delayed inodes xarray with a simple xa_init().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently try_release_extent_mapping() as an int return type, but we
use it as a boolean. Its only caller, the release folio callback, also
returns a boolean which corresponds to try_release_extent_mapping()'s
return value. So change its return value type to bool as well as its
helper try_release_extent_state().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At try_release_extent_mapping(), called during the release folio callback
(btrfs_release_folio() callchain), we don't release any extent maps in the
range if the GFP flags don't allow blocking. This behaviour is exaggerated
because:
1) Both searching for extent maps and removing them are not blocking
operations. The only thing that it is the cond_resched() call at the
end of the loop that searches for and removes extent maps;
2) We currently only operate on a single page, so for the case where
block size matches the page size, we can only have one extent map,
and for the case where the block size is smaller than the page size,
we can have at most 16 extent maps.
So it's very unlikely the cond_resched() call will ever block even in the
block size smaller than page size scenario.
So instead of not removing any extent maps at all in case the GFP glags
don't allow blocking, keep removing extent maps while we don't need to
reschedule. This makes it safe for the subpage case and for a future
where we can process folios with a size larger than a page.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we don't attempt to release extent maps if the inode has an
i_size that is not greater than 16M. This condition was added way back
in 2008 by commit 70dec8079d ("Btrfs: extent_io and extent_state
optimizations"), without any explanation about it. A quick chat with
Chris on slack revealed that the goal was probably to release the extent
maps for small files only when closing the inode. This however can be
harmful in case we have tons of such files being kept open for very long
periods of time, since we will consume more and more pages for extent
maps.
So remove the condition.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nowadays we have the btrfs_get_fs_generation() to get the current
generation of the filesystem, so there's no need anymore to lock the
transaction spinlock to read it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename the following variables:
1) "btrfs_inode" to "inode", because it's shorter to type and clear, and
we don't have a VFS inode here as well, so there's no confusion;
2) "tree" to "io_tree", to be clear which tree we are dealing with, since
we use 2 different trees in the function;
3) "map" to "extent_tree" since "map" gives the idea we are dealing with
an extent map for example, but we are dealing with the inode's extent
tree (the tree which stores extent maps).
These also make the next patches simpler.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add some tracepoints for the extent map shrinker to help debug and analyse
main events. These have proved useful during development of the shrinker.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nowadays we have a lock used to synchronize mmap writes with reflink and
fsync operations (struct btrfs_inode::i_mmap_lock), so update the comment
for btrfs_set_inode_full_sync() to mention that it can also be called
while holding that mmap lock. Besides being a valid alternative to the
inode's VFS lock, we already have the extent map shrinker using that mmap
lock instead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extent maps are used either to represent existing file extent items, or to
represent new extents that are going to be written and the respective file
extent items are created when the ordered extent completes.
We currently don't have any limit for how many extent maps we can have,
neither per inode nor globally. Most of the time this not too noticeable
because extent maps are removed in the following situations:
1) When evicting an inode;
2) When releasing folios (pages) through the btrfs_release_folio() address
space operation callback.
However we won't release extent maps in the folio range if the folio is
either dirty or under writeback or if the inode's i_size is less than
or equals to 16M (see try_release_extent_mapping(). This 16M i_size
constraint was added back in 2008 with commit 70dec8079d ("Btrfs:
extent_io and extent_state optimizations"), but there's no explanation
about why we have it or why the 16M value.
This means that for buffered IO we can reach an OOM situation due to too
many extent maps if either of the following happens:
1) There's a set of tasks constantly doing IO on many files with a size
not larger than 16M, specially if they keep the files open for very
long periods, therefore preventing inode eviction.
This requires a really high number of such files, and having many non
mergeable extent maps (due to random 4K writes for example) and a
machine with very little memory;
2) There's a set tasks constantly doing random write IO (therefore
creating many non mergeable extent maps) on files and keeping them
open for long periods of time, so inode eviction doesn't happen and
there's always a lot of dirty pages or pages under writeback,
preventing btrfs_release_folio() from releasing the respective extent
maps.
This second case was actually reported in the thread pointed by the Link
tag below, and it requires a very large file under heavy IO and a machine
with very little amount of RAM, which is probably hard to happen in
practice in a real world use case.
However when using direct IO this is not so hard to happen, because the
page cache is not used, and therefore btrfs_release_folio() is never
called. Which means extent maps are dropped only when evicting the inode,
and that means that if we have tasks that keep a file descriptor open and
keep doing IO on a very large file (or files), we can exhaust memory due
to an unbounded amount of extent maps. This is especially easy to happen
if we have a huge file with millions of small extents and their extent
maps are not mergeable (non contiguous offsets and disk locations).
This was reported in that thread with the following fio test:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS=""
cat <<EOF > /tmp/fio-job.ini
[global]
name=fio-rand-write
filename=$MNT/fio-rand-write
rw=randwrite
bs=4K
direct=1
numjobs=16
fallocate=none
time_based
runtime=90000
[file1]
size=300G
ioengine=libaio
iodepth=16
EOF
umount $MNT &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
Monitoring the btrfs_extent_map slab while running the test with:
$ watch -d -n 1 'cat /sys/kernel/slab/btrfs_extent_map/objects \
/sys/kernel/slab/btrfs_extent_map/total_objects'
Shows the number of active and total extent maps skyrocketing to tens of
millions, and on systems with a short amount of memory it's easy and quick
to get into an OOM situation, as reported in that thread.
So to avoid this issue add a shrinker that will remove extents maps, as
long as they are not pinned, and takes proper care with any concurrent
fsync to avoid missing extents (setting the full sync flag while in the
middle of a fast fsync). This shrinker is triggered through the callbacks
nr_cached_objects and free_cached_objects of struct super_operations.
The shrinker will iterate over all roots and over all inodes of each
root, and keeps track of the last scanned root and inode, so that the
next time it runs, it starts from that root and from the next inode.
This is similar to what xfs does for its inode reclaim (implements those
callbacks, and cycles through inodes by starting from where it ended
last time).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a per cpu counter that tracks the total number of extent maps that are
in extent trees of inodes that belong to fs trees. This is going to be
used in an upcoming change that adds a shrinker for extent maps. Only
extent maps for fs trees are considered, because for special trees such as
the data relocation tree we don't want to evict their extent maps which
are critical for the relocation to work, and since those are limited, it's
not a concern to have them in memory during the relocation of a block
group. Another case are extent maps for free space cache inodes, which
must always remain in memory, but those are limited (there's only one per
free space cache inode, which means one per block group).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extent maps are always associated to an inode's extent map tree, so
there's no need to pass the extent map tree explicitly to try_merge_map().
In order to facilitate an upcoming change that adds a shrinker for extent
maps, change try_merge_map() to receive the inode instead of its extent
map tree.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extent maps are always associated to an inode's extent map tree, so
there's no need to pass the extent map tree explicitly to
setup_extent_mapping().
In order to facilitate an upcoming change that adds a shrinker for extent
maps, change setup_extent_mapping() to receive the inode instead of its
extent map tree.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extent maps are always associated to an inode's extent map tree, so
there's no need to pass the extent map tree explicitly to
replace_extent_mapping().
In order to facilitate an upcoming change that adds a shrinker for extent
maps, change replace_extent_mapping() to receive the inode instead of its
extent map tree.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extent maps are always associated to an inode's extent map tree, so
there's no need to pass the extent map tree explicitly to
remove_extent_mapping().
In order to facilitate an upcoming change that adds a shrinker for extent
maps, change remove_extent_mapping() to receive the inode instead of its
extent map tree.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extent maps are always associated to an inode's extent map tree, so
there's no need to pass the extent map tree explicitly to
clear_em_logging().
In order to facilitate an upcoming change that adds a shrinker for extent
maps, change clear_em_logging() to receive the inode instead of its extent
map tree.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extent maps are always added to an inode's extent map tree, so there's no
need to pass the extent map tree explicitly to add_extent_mapping().
In order to facilitate an upcoming change that adds a shrinker for extent
maps, change add_extent_mapping() to receive the inode instead of its
extent map tree.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A comment from Filipe on one of my previous cleanups brought my
attention to a new helper we have for getting the root id of a root,
which makes it easier to read in the code.
The changes where made with the following Coccinelle semantic patch:
// <smpl>
@@
expression E,E1;
@@
(
E->root_key.objectid = E1
|
- E->root_key.objectid
+ btrfs_root_id(E)
)
// </smpl>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor style fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
Our subpage testing started hanging on generic/560 and I bisected it
down to 1cab1375ba ("btrfs: reuse cloned extent buffer during
fiemap to avoid re-allocations"). This is subtle because we use
eb->start to figure out where in the folio we're copying to when we're
subpage, as our ->start may refer to an area inside of the folio.
For example, assume a 16K page size machine with a 4K node size, and
assume that we already have a cloned extent buffer when we cloned the
previous search.
copy_extent_buffer_full() will do the following when copying the extent
buffer path->nodes[0] (src) into cloned (dest):
src->start = 8k; // this is the new leaf we're cloning
cloned->start = 4k; // this is left over from the previous clone
src_addr = folio_address(src->folios[0]);
dest_addr = folio_address(dest->folios[0]);
memcpy(dest_addr + get_eb_offset_in_folio(dst, 0),
src_addr + get_eb_offset_in_folio(src, 0), src->len);
Now get_eb_offset_in_folio() is where the problems occur, because for
sub-pagesize blocksize we can have multiple eb's per folio, the code for
this is as follows
size_t get_eb_offset_in_folio(eb, offset) {
return (eb->start + offset & (folio_size(eb->folio[0]) - 1));
}
So in the above example we are copying into offset 4K inside the folio.
However once we update cloned->start to 8K to match the src the math for
get_eb_offset_in_folio() changes, and any subsequent reads (i.e.
btrfs_item_key_to_cpu()) will start reading from the offset 8K instead
of 4K where we copied to, giving us garbage.
Fix this by setting start before we co copy_extent_buffer_full() to make
sure that we're copying into the same offset inside of the folio that we
will read from later.
All other sites of copy_extent_buffer_full() are correct because we
either set ->start beforehand or we simply don't change it in the case
of the tree-log usage.
With this fix we now pass generic/560 on our subpage tests.
Fixes: 1cab1375ba ("btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that these two structs are the same, move the btrfs_data_ref and
btrfs_tree_ref up and use these in the btrfs_delayed_ref_node. Then
remove the btrfs_delayed_*_ref structs.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we don't use these helpers anywhere, remove them.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only ever need to use this to get the level of the tree block ref, so
use the btrfs_delayed_ref_owner() helper, which returns the level for
the given reference.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that most of our elements are inside of btrfs_delayed_ref_node
directly and we have helpers for the delayed_data_ref bits, go ahead and
remove all direct usage of btrfs_delayed_data_ref and use the helpers
where needed.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to pass in all the elements for the backrefs as function
arguments, simply pass through the btrfs_delayed_ref_node and then
extract the values we need from that.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have all the information we need in our btrfs_delayed_ref_node, which
we already pass into __btrfs_free_extent. Drop the extra arguments and
just extract the values from btrfs_delayed_ref_node.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're just extracting the values from btrfs_delayed_ref_node and passing
them through, simply pass the btrfs_delayed_ref_node into
__btrfs_inc_extent_ref and shrink the function arguments.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is how we refer to it in the rest of the extent reference related
code, make it consistent.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These two members are shared by both the tree refs and data refs, so
move them into btrfs_delayed_ref_node proper. This allows us to greatly
simplify the comparison code, as the shared refs always only sort on
parent, and the non shared refs always sort first on ref_root, and then
only data refs sort on their specific fields.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We consistently use ->num_bytes everywhere through the delayed ref code,
except in btrfs_ref. Rename btrfs_ref to match all the other code.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that these helpers are identical, create a helper function that
handles everything properly and strip the individual helpers down to use
just the common helper. This cleans up a significant amount of
duplicated code.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all of the delayed ref information is in the delayed ref node,
drastically simplify the delayed ref tracepoints by simply passing in
the btrfs_delayed_ref_node and populating the tracepoints with the
values from the structure itself.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the btrfs_delayed_ref_node contains a union of the data and
metadata specific information we can move the initialization into
init_delayed_ref_common and just use the btrfs_ref to initialize the
correct fields of the reference.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
