We had a bug reported where the journal is failing to allocate a journal
write - this should help figure out what's going on.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This eliminates the need to scan every bucket to regenerate dev_usage at
mount time.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Originally, bcachefs - going back to bcache - stored, for each bucket, a
16 bit counter corresponding to how long it had been since the bucket
was read from. But, this required periodically rescaling counters on
every bucket to avoid wraparound. That wasn't an issue in bcache, where
we'd perodically rewrite the per bucket metadata all at once, but in
bcachefs we're trying to avoid having to walk every single bucket.
This patch switches to persisting 64 bit io clocks, corresponding to the
64 bit bucket timestaps introduced in the previous patch with
KEY_TYPE_alloc_v2.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug introduced by "bcachefs: Improve diagnostics when
journal entries are missing" - devices in a replicas entry are supposed
to be sorted.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, make journal writes obey foreground_target and metadata_target.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's an outstanding bug with journal entries being missing in journal
replay. This patch adds code to print out where the journal entries were
physically located that were around the entry(ies) being missing, which
should make debugging easier.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
All writes prior to a journal write need to be flushed before the
journal write itself happens. On single device filesystems, it suffices
to mark the write with REQ_PREFLUSH|REQ_FUA, but on multi device
filesystems we need to issue flushes to every device - and wait for them
to complete - before issuing the journal writes. Previously, we were
issuing flushes to every device, but we weren't waiting for them to
complete before issuing the journal writes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is because we had a bug where we were writing out journal entries
with garbage last_seq, and not catching it.
Also, completely ignore jset->last_seq when JSET_NO_FLUSH is true,
because of aforementioned bug, but change the write path to set last_seq
to 0 when JSET_NO_FLUSH is true.
Minor other cleanups and comments.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We don't want to fail the recovery/mount because of a single error
reading from the journal - the relevant journal entry may still be found
on other devices, and missing or no journal entries found is already
handled later in the recovery process.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It used to be safe to reallocate a buf that the write path owns without
holding the journal lock, but now this can trigger an assertion in
journal_seq_to_buf().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With various newer key types - stripe keys, inline data extents - the
old approach of calculating the maximum size of the value is becoming
more and more error prone. Better to switch to bkey_on_stack, which can
dynamically allocate if necessary to handle any size bkey.
In particular we also want to get rid of BKEY_EXTENT_VAL_U64s_MAX.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Try to always keep 1/8th of the journal free, on top of
pre-reservations
- Move the check for whether the journal is stuck to
bch2_journal_space_available, and make it only fire when there aren't
any journal writes in flight (that might free up space by updating
last_seq)
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds a flag to journal entries which, if set, indicates that
they weren't done as flush/fua writes.
- non flush/fua journal writes don't update last_seq (i.e. they don't
free up space in the journal), thus the journal free space
calculations now check whether nonflush journal writes are currently
allowed (i.e. are we low on free space, or would doing a flush write
free up a lot of space in the journal)
- write_delay_ms, the user configurable option for when open journal
entries are automatically written, is now interpreted as the max
delay between flush journal writes (default 1 second).
- bch2_journal_flush_seq_async is changed to ensure a flush write >=
the requested sequence number has happened
- journal read/replay must now ignore, and blacklist, any journal
entries newer than the most recent flush entry in the journal. Also,
the way the read_entire_journal option is handled has been improved;
struct journal_replay now has an entry, 'ignore', for entries that
were read but should not be used.
- assorted refactoring and improvements related to journal read in
journal_io.c and recovery.c
Previously, we'd have to issue a flush/fua write every time we
accumulated a full journal entry - typically the bucket size. Now we
need to issue them much less frequently: when an fsync is requested, or
it's been more than write_delay_ms since the last flush, or when we need
to free up space in the journal. This is a significant performance
improvement on many write heavy workloads.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch increases the maximum journal buffers in flight from 2 to 4 -
this will be particularly helpful when in the future we stop requiring
flush+fua for every journal write.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
it's useful to know whether an error was for a read or a write - this
also standardizes error messages a bit more.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we detect bad keys in the journal that have to be dropped, the flow
control was wrong - we ended up not checking the next key in that entry.
Oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Improved the way we track various state by adding j->err_seq, which
records the first journal sequence number that encountered an error
being written, and j->last_empty_seq, which records the most recent
journal entry that was completely empty.
Also, use the low bits of the journal sequence number to index the
corresponding journal_buf.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, the journal entry read code was changed so that if we got a
journal entry that failed validation, we'd try to use it, preferring to
use a good version from another device if available.
But this left a bug where if an earlier validation check (say, checksum)
failed, the later checks (for last_seq) wouldn't run and we'd end up
using a journal entry with a garbage last_seq field. This fixes that so
that the later validation checks run and if necessary change those
fields to something sensible.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Print out more information in error messages
- On checksum error, keep the journal entry but mark it bad so that we
can prefer entries from other devices that don't have bad checksums
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Awhile back the mechanism for garbage collecting unused replicas entries
was significantly improved, but some cleanup was missed - this patch
does that now.
This is also prep work for a patch to account for erasure coded parity
blocks separately - we need to consolidate the logic for
checking/marking the various replicas entries from one bkey into a
single function.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We define our own BLK_STS_REMOVED, so we need our own to_str helper too.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Improved error messages are always a good thing
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
To be used the debug tool that dumps the contents of the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now update the alloc info (bucket sector counts) atomically with
journalling the update to the interior btree nodes, and we also set new
btree roots atomically with the journalled part of the btree update.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, BTREE_ID_INODES was special - inodes were indexed by the
inode field, which meant the offset field of struct bpos wasn't used,
which led to special cases in e.g. the btree iterator code.
Now, inodes in the inodes btree are indexed by the offset field.
Also: prevously min_key was special for extents btrees, min_key for
extents would equal max_key for the previous node. Now, min_key =
bkey_successor() of the previous node, same as non extent btrees.
This means we can completely get rid of
btree_type_sucessor/predecessor.
Also make some improvements to the metadata IO validate/compat code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_ptr_swab was never updated when the code for generic keys with
pointers was added - it assumed the entire val was only used for
pointers.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Switch to always using bio_add_page(), which merges contiguous pages now
that we have multipage bvecs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now, we store blacklisted journal sequence numbers in the superblock,
not the journal: this helps to greatly simplify the code, and more
importantly it's now implemented in a way that doesn't require all btree
nodes to be visited before starting the journal - instead, we
unconditionally blacklist the next 4 journal sequence numbers after an
unclean shutdown.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
this lets us get rid of a lot of extra switch statements - in a lot of
places we dispatch on the btree node type, and then the key type, so
this is a nice cleanup across a lot of code.
Also improve the on disk format versioning stuff.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
userspace allocators don't align allocations as nicely as kernel
allocators, which meant that in some cases we weren't allocating big
enough bvec arrays - just make the calculations more rigorous and
explicit to fix it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also improve error reporting - only return an error from
bch2_journal_flush_seq() if we had an error writing that entry (i.e. not
if there was an error with a newer entry).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
journal_buf_switch is called from the foreground when getting a journal
reservation and thus is somewhat latency sensitive;
bch2_bucket_seq_cleanup has to run infrequently but is a bit expensive
when it does run.
Call it from the journal write path instead, and punt the journal write
to worqueue context.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
