There is a spelling mistake in macro CARMINE_TOTAL_DIPLAY_MEM. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
Signal vt subsystem to redraw console when switching to dummycon
with deferred takeover enabled. Makes the console switch to fbcon
and displays the available output.
With deferred takeover enabled, dummycon acts as the placeholder
until the first output to the console happens. At that point, fbcon
takes over. If the output happens while dummycon is not active, it
cannot inform fbcon. This is the case if the vt subsystem runs in
graphics mode.
A typical graphical boot starts plymouth, a display manager and a
compositor; all while leaving out dummycon. Switching to a text-mode
console leaves the console with dummycon even if a getty terminal
has been started.
Returning true from dummycon's con_switch helper signals the vt
subsystem to redraw the screen. If there's output available dummycon's
con_putc{s} helpers trigger deferred takeover of fbcon, which sets a
display mode and displays the output. If no output is available,
dummycon remains active.
v2:
- make the comment slightly more verbose (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Andrei Borzenkov <arvidjaar@gmail.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1242191
Tested-by: Andrei Borzenkov <arvidjaar@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 83d83bebf4 ("console/fbcon: Add support for deferred console takeover")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.19+
Link: https://lore.kernel.org/r/20250520071418.8462-1-tzimmermann@suse.de
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
devm_kasprintf() returns NULL when memory allocation fails. Currently,
wled_configure() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: f86b77583d ("backlight: pm8941: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250401091647.22784-1-bsdhenrymartin@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Remove support for fb events from the led backlight trigger. Provide
the helper ledtrig_backlight_blank() instead. Call it from fbdev to
inform the trigger of changes to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of the fbdev
notifiers, maintain an internal list of led backlight triggers.
v3:
- export ledtrig_backlight_blank()
v2:
- maintain global list of led backlight triggers (Lee)
- avoid IS_REACHABLE() in source file (Lee)
- notify on changes to blank state instead of display state
- use lock guards
- initialize led list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Remove support for fb events from the lcd subsystem. Provide the
helper lcd_notify_blank_all() instead. In fbdev, call
lcd_notify_blank_all() to inform the lcd subsystem of changes
to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of fbdev
notifiers, maintain an internal list of lcd devices.
v3:
- export lcd_notify_mode_change_all() (kernel test robot)
v2:
- maintain global list of lcd devices
- avoid IS_REACHABLE() in source file
- use lock guards
- initialize lcd list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-9-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Move the handling of display updates to separate helper functions.
There is code for handling fbdev blank events and fbdev mode changes.
The code currently runs from fbdev event notifiers, which will be
replaced.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-8-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Remove support for fb events from backlight subsystem. Provide the
helper backlight_notify_blank_all() instead. Also export the existing
helper backlight_notify_blank() to update a single backlight device.
In fbdev, call either helper to inform the backlight subsystem of
changes to a display's blank state. If the framebuffer device has a
specific backlight, only update this one; otherwise update all.
v4:
- protect blacklight declarations with IS_REACHABLE() (kernel test robot)
v3:
- declare empty fb_bl_notify_blank() as static inline (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Move the handling of blank-state updates into a separate helper,
so that is can be called without the fbdev event. No functional
changes.
As a minor improvement over the original code, the update replaces
manual locking with a guard.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-6-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Look at the blank state provided by FB_EVENT_BLANK to determine
whether to enable or disable a backlight. Remove the tracking fields
from struct backlight_device.
Tracking requires three variables, fb_on, prev_fb_on and the
backlight's use_count. If fb_on is true, the display has been
unblanked. The backlight needs to be enabled if the display was
blanked before (i.e., prev_fb_on is false) or if use_count is still
at 0. If fb_on is false, the display has been blanked. In this case,
the backlight has to be disabled was unblanked before and the
backlight's use_count is greater than 0.
This change removes fbdev state tracking from blacklight. All the
backlight requires it its own use counter and information about
changes to the display. Removing fbdev internals makes backlight
drivers easier to integrate into other display drivers, such as DRM.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-5-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
The event FB_EVENT_BLANK sends the new blank state in the event's
data field. Also send the old state. It's an additional field in the
data array; existing receivers won't notice the difference.
The backlight subsystem currently tracks blank state per display per
backlight. That is not optimal as it ties backlight code to fbdev. A
subsystem should not track internal state of another subsystem. With
both, new and old, blank state in FB_EVENT_BLANK, the backlight code
will not require its own state tracker any longer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-4-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Store the display's blank status in struct fb_info.blank and track
it in fb_blank(). As an extra, the status is now available from the
sysfs blank attribute.
Support for blanking is optional. Therefore framebuffer_alloc()
initializes the state to FB_BLANK_UNBLANK (i.e., the display is
on). If the fb_blank callback has been set, register_framebuffer()
sets the state to FB_BLANK_POWERDOWN. On the first modeset, the
call to fb_blank() will update it to _UNBLANK. This is important,
as listeners to FB_EVENT_BLANK will now see the display being
switched on.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Reimplement fb_blank() to return early on errors. No functional
changes. Prepares the helper for tracking the blanking state in
struct fb_info.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-2-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Move the calculation of the bits per pixels for screen_info into a
helper function. This will make it available to other callers besides
the firmware code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-14-tzimmermann@suse.de
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
* Added devicetree bindings for backlight controllers on Apple's
DWI interface.
* Added a new driver (apple_dwi_bl) for these controllers found
on some Apple mobile devices.
* Added MAINTAINERS entries for the new driver.
* led_bl: Fixed a locking issue by holding the led_access lock
when calling led_sysfs_disable() during device removal to
prevent potential warnings.
* Removed unnecessary <linux/fb.h> includes from a bunch of
drivers.
* tdo24m: Removed redundant whitespace in Kconfig description.
* pcf50633-backlight: Removed the driver as the underlying
pcf50633 MFD and s3c24xx platform support were removed.
-----BEGIN PGP SIGNATURE-----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=+rL+
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Apple DWI Backlight:
- Added devicetree bindings for backlight controllers on Apple's DWI
interface.
- Added a new driver (apple_dwi_bl) for these controllers found on
some Apple mobile devices.
- Added MAINTAINERS entries for the new driver.
- led_bl: Fixed a locking issue by holding the led_access lock when
calling led_sysfs_disable() during device removal to prevent
potential warnings.
- Removed unnecessary <linux/fb.h> includes from a bunch of drivers.
- tdo24m: Removed redundant whitespace in Kconfig description.
- pcf50633-backlight: Removed the driver as the underlying pcf50633 MFD
and s3c24xx platform support were removed.
* tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (22 commits)
backlight: pcf50633-backlight: Remove unused driver
backlight: tdo24m: Eliminate redundant whitespace
MAINTAINERS: Add entries for Apple DWI backlight controller
backlight: apple_dwi_bl: Add Apple DWI backlight driver
dt-bindings: leds: backlight: apple,dwi-bl: Add Apple DWI backlight
backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()
backlight: wm831x_bl: Do not include <linux/fb.h>
backlight: vgg2432a4: Do not include <linux/fb.h>
backlight: tps65217_bl: Do not include <linux/fb.h>
backlight: max8925_bl: Do not include <linux/fb.h>
backlight: lv5207lp: Do not include <linux/fb.h>
backlight: locomolcd: Do not include <linux/fb.h>
backlight: hp680_bl: Do not include <linux/fb.h>
backlight: ep93xx_bl: Do not include <linux/fb.h>
backlight: da9052_bl: Do not include <linux/fb.h>
backlight: da903x_bl: Do not include <linux/fb.h>
backlight: bd6107_bl: Do not include <linux/fb.h>
backlight: as3711_bl: Do not include <linux/fb.h>
backlight: adp8870_bl: Do not include <linux/fb.h>
backlight: adp8860_bl: Do not include <linux/fb.h>
...
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
Using device_create_with_groups() to simplify creation and removal.
Same as commit 1083a7be45 ("tty: Use static attribute groups for
sysfs entries").
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Added checks for xoffset, yoffset settings.
Incorrect settings of these parameters can lead to errors
in sm501fb_pan_ functions.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5fc404e47b ("[PATCH] fb: SM501 framebuffer driver")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.
The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.
For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.
For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.
Add check for this value.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Value of enum parameter 'plane' is initialized in dss_init_overlays and
cannot take the value OMAP_DSS_WB. Function dispc_ovl_setup_common could
be called with this value of parameter only from dispc_wb_setup, which has
never been used and has been removed in commit 4f55bb0380
("omapfb: Remove unused writeback code"). The code in the if-branch is
unreachable.
Remove unreachable branch.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The original version duplicated more or less the same algorithms for
both system and i/o memory.
In this version the drawing algorithms (copy/fill/blit) are separate
from the memory access (system and i/o). The two parts are getting
combined in the loadable module sources. This also makes it more robust
against wrong memory access type or alignment mistakes as there's no
direct pointer access or arithmetic in the algorithm sources anymore.
Due to liberal use of inlining the compiled result is a single function
in all 6 cases, without unnecessary function calls. Unlike earlier the
use of macros could be minimized as apparently both gcc and clang is
capable now to do the same with inline functions just as well.
What wasn't quite the same in the two variants is the support for pixel
order reversing. This version is capable to do that for both system and
I/O memory, and not only for the latter. As demand for low bits per
pixel modes isn't high there's a configuration option to enable this
separately for the CFB and SYS modules.
The pixel reversing algorithm is different than earlier and was designed
so that it can take advantage of bit order reversing instructions on
architectures which have them. And even for higher bits per pixel modes
like four bpp.
One of the shortcomings of the earlier version was the incomplete
support for foreign endian framebuffers. Now all three drawing
algorithms produce correct output on both endians with native and
foreign framebuffers. This is one of the important differences even if
otherwise the algorithms don't look too different than before.
All three routines work now with aligned native word accesses. As a
consequence blitting isn't limited to 32 bits on 64 bit architectures as
it was before.
The old routines silently assumed that rows are a multiple of the word
size. Due to how the new routines function this isn't a requirement any
more and access will be done aligned regardless. However if the
framebuffer is configured like that then some of the fast paths won't be
available.
As this code is supposed to be running on all supported architectures it
wasn't optimized for a particular one. That doesn't mean I haven't
looked at the disassembly. That's where I noticed that it isn't a good
idea to use the fallback bitreversing code for example.
The low bits per pixel modes should be faster than before as the new
routines can blit 4 pixels at a time.
On the higher bits per pixel modes I retained the specialized aligned
routines so it should be more or less the same, except on 64 bit
architectures. There the blitting word size is double now which means 32
BPP isn't done a single pixel a time now.
The code was tested on x86, amd64, mips32 and mips64. The latter two in
big endian configuration. Originally thought I can get away with the
first two, but with such bit twisting code byte ordering is tricky and
not really possible to get right without actually verifying it.
While writing such routines isn't rocket science a lot of time was spent
on making sure that pixel ordering, foreign byte order, various bits per
pixels, cpu endianness and word size will give the expected result in
all sorts of combinations without making it overly complicated or full
with special cases.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
[WHY]
1. The driver forgot to call device_remove_file()
in sh_mobile_lcdc_overlay_fb_unregister(), and there was
no error handling when calling device_create_file() failed.
2. This should probably use device_add_group() instead of
individual files to simplify both creation and removal. [Arnd]
3. The driver core can register and cleanup sysfs groups already.
as commit 95cdd538e0 ("fbdev: efifb: Register sysfs groups
through driver core").
[HOW]
Register sysfs groups through driver core.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
mdacon has roughly the same dependencies as vgacon but expresses them
as a negative list instead of a positive list, with the only practical
difference being PowerPC/CHRP, which uses vga16fb instead of vgacon.
The CONFIG_MDA_CONSOLE description advises to only turn it on when vgacon
is also used because MDA/Hercules-only systems should be using vgacon
instead, so just change the list to enforce that directly for simplicity.
The probing was broken from 2002 to 2008, this improves on the fix
that was added then: If vgacon is a loadable module, then mdacon
cannot be built-in now, and the list of systems that support vgacon
is carried over.
Fixes: 0b9cf3aa6b ("mdacon messing up default vc's - set default to vc13-16 again")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
dummycon fails to build on ARM/footbridge when the VGA console is
disabled, since I got the dependencies slightly wrong in a previous
patch:
drivers/video/console/dummycon.c: In function 'dummycon_init':
drivers/video/console/dummycon.c:27:25: error: 'CONFIG_DUMMY_CONSOLE_COLUMNS' undeclared (first use in this function); did you mean 'CONFIG_DUMMY_CONSOLE'?
27 | #define DUMMY_COLUMNS CONFIG_DUMMY_CONSOLE_COLUMNS
drivers/video/console/dummycon.c:28:25: error: 'CONFIG_DUMMY_CONSOLE_ROWS' undeclared (first use in this function); did you mean 'CONFIG_DUMMY_CONSOLE'?
28 | #define DUMMY_ROWS CONFIG_DUMMY_CONSOLE_ROWS
This only showed up after many thousand randconfig builds on Arm, and
doesn't matter in practice, but should still be fixed. Address it by
using the default row/columns on footbridge after all in that corner
case.
Fixes: 4293b09251 ("dummycon: limit Arm console size hack to footbridge")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409151512.LML1slol-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Dummycon is used as a fallback conswitchp for vgacon and fbcon
in the VT code, and there are no references to it if all three
are disabled, so just leave it out of the kernel image for
configurations without those.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “au1100fb_setmode”.
This issue was detected by using the Coccinelle software.
Fixes: 3b495f2bb7 ("Au1100 FB driver uplift for 2.6.")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Convert to use devm_kmemdup() and devm_kmemdup_array() which are
more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The erase colour calculation for fbcon clearing should use get_color instead
of attr_col_ec, like everything else. The latter is similar but is not correct.
For example it's missing the depth dependent remapping and doesn't care about
blanking.
The problem can be reproduced by setting up the background colour to grey
(vt.color=0x70) and having an fbcon console set to 2bpp (4 shades of gray).
Now the background attribute should be 1 (dark gray) on the console.
If the screen is scrolled when pressing enter in a shell prompt at the bottom
line then the new line is cleared using colour 7 instead of 1. That's not
something fillrect likes (at 2bbp it expect 0-3) so the result is interesting.
This patch switches to get_color with vc_video_erase_char to determine the
erase colour from attr_col_ec. That makes the latter function redundant as
no other users were left.
Use correct erase colour for clearing in fbcon
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
I was wondering why there's garbage at the bottom of the screen when
tile blitting is used with an odd mode like 1080, 600 or 200. Sure there's
only space for half a tile but the same area is clean when the buffer
is bitmap.
Then later I found that it's supposed to be cleaned but that's not
implemented. So I took what's in bitblit and adapted it for tileblit.
This implementation was tested for both the horizontal and vertical case,
and now does the same as what's done for bitmap buffers.
If anyone is interested to reproduce the problem then I could bet that'd
be on a S3 or Ark. Just set up a mode with an odd line count and make
sure that the virtual size covers the complete tile at the bottom. E.g.
for 600 lines that's 608 virtual lines for a 16 tall tile. Then the
bottom area should be cleaned.
For the right side it's more difficult as there the drivers won't let an
odd size happen, unless the code is modified. But once it reports back a
few pixel columns short then fbcon won't use the last column. With the
patch that column is now clean.
Btw. the virtual size should be rounded up by the driver for both axes
(not only the horizontal) so that it's dividable by the tile size.
That's a driver bug but correcting it is not in scope for this patch.
Implement missing margin clearing for tileblit
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
With the introduction of mapping_wrprotect_range() there is no need to use
folio_mkclean() in order to write-protect mappings of frame buffer pages,
and therefore no need to inappropriately set kernel-allocated page->index,
mapping fields to permit this operation.
Instead, store the pointer to the page cache object for the mapped driver
in the fb_deferred_io object, and use the already stored page offset from
the pageref object to look up mappings in order to write-protect them.
This is justified, as for the page objects to store a mapping pointer at
the point of assignment of pages, they must all reference the same
underlying address_space object. Since the life time of the pagerefs is
also the lifetime of the fb_deferred_io object, storing the pointer here
makes sense.
This eliminates the need for all of the logic around setting and
maintaining page->index,mapping which we remove.
This eliminates the use of folio_mkclean() entirely but otherwise should
have no functional change.
[lorenzo.stoakes@oracle.com: fixup unused variable warnings]
Link: https://lkml.kernel.org/r/d4018405-2762-4385-a816-e54cc23839ac@lucifer.local
Link: https://lkml.kernel.org/r/81171ab16c14e3df28f6de9d14982cee528d8519.1739029358.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Kajtar Zsolt <soci@c64.rulez.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to
release the framebuffer forcefully. If this framebuffer is in use it
produce the following WARN and hence this framebuffer is never released.
[ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40
< snip >
[ 44.111289] Call Trace:
[ 44.111290] <TASK>
[ 44.111291] ? show_regs+0x6c/0x80
[ 44.111295] ? __warn+0x8d/0x150
[ 44.111298] ? framebuffer_release+0x2c/0x40
[ 44.111300] ? report_bug+0x182/0x1b0
[ 44.111303] ? handle_bug+0x6e/0xb0
[ 44.111306] ? exc_invalid_op+0x18/0x80
[ 44.111308] ? asm_exc_invalid_op+0x1b/0x20
[ 44.111311] ? framebuffer_release+0x2c/0x40
[ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb]
[ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus]
[ 44.111323] device_remove+0x40/0x80
[ 44.111325] device_release_driver_internal+0x20b/0x270
[ 44.111327] ? bus_find_device+0xb3/0xf0
Fix this by moving the release of framebuffer and assosiated memory
to fb_ops.fb_destroy function, so that framebuffer framework handles
it gracefully.
While we fix this, also replace manual registrations/unregistration of
framebuffer with devm_register_framebuffer.
Fixes: 68a2d20b79 ("drivers/video: add Hyper-V Synthetic Video Frame Buffer Driver")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740845791-19977-3-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740845791-19977-3-git-send-email-ssengar@linux.microsoft.com>
The device object required in 'hvfb_release_phymem' function
for 'dma_free_coherent' can also be obtained from the 'info'
pointer, making 'hdev' parameter in 'hvfb_putmem' redundant.
Remove the unnecessary 'hdev' argument from 'hvfb_putmem'.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740845791-19977-2-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740845791-19977-2-git-send-email-ssengar@linux.microsoft.com>
Gen 2 Hyper-V VMs boot via EFI and have a standard EFI framebuffer
device. When the kdump kernel runs in such a VM, loading the efifb
driver may hang because of accessing the framebuffer at the wrong
memory address.
The scenario occurs when the hyperv_fb driver in the original kernel
moves the framebuffer to a different MMIO address because of conflicts
with an already-running efifb or simplefb driver. The hyperv_fb driver
then informs Hyper-V of the change, which is allowed by the Hyper-V FB
VMBus device protocol. However, when the kexec command loads the kdump
kernel into crash memory via the kexec_file_load() system call, the
system call doesn't know the framebuffer has moved, and it sets up the
kdump screen_info using the original framebuffer address. The transition
to the kdump kernel does not go through the Hyper-V host, so Hyper-V
does not reset the framebuffer address like it would do on a reboot.
When efifb tries to run, it accesses a non-existent framebuffer
address, which traps to the Hyper-V host. After many such accesses,
the Hyper-V host thinks the guest is being malicious, and throttles
the guest to the point that it runs very slowly or appears to have hung.
When the kdump kernel is loaded into crash memory via the kexec_load()
system call, the problem does not occur. In this case, the kexec command
builds the screen_info table itself in user space from data returned
by the FBIOGET_FSCREENINFO ioctl against /dev/fb0, which gives it the
new framebuffer location.
This problem was originally reported in 2020 [1], resulting in commit
3cb73bc3fa ("hyperv_fb: Update screen_info after removing old
framebuffer"). This commit solved the problem by setting orig_video_isVGA
to 0, so the kdump kernel was unaware of the EFI framebuffer. The efifb
driver did not try to load, and no hang occurred. But in 2024, commit
c25a19afb8 ("fbdev/hyperv_fb: Do not clear global screen_info")
effectively reverted 3cb73bc3fa. Commit c25a19afb8 has no reference
to 3cb73bc3fa, so perhaps it was done without knowing the implications
that were reported with 3cb73bc3fa. In any case, as of commit
c25a19afb8, the original problem came back again.
Interestingly, the hyperv_drm driver does not have this problem because
it never moves the framebuffer. The difference is that the hyperv_drm
driver removes any conflicting framebuffers *before* allocating an MMIO
address, while the hyperv_fb drivers removes conflicting framebuffers
*after* allocating an MMIO address. With the "after" ordering, hyperv_fb
may encounter a conflict and move the framebuffer to a different MMIO
address. But the conflict is essentially bogus because it is removed
a few lines of code later.
Rather than fix the problem with the approach from 2020 in commit
3cb73bc3fa, instead slightly reorder the steps in hyperv_fb so
conflicting framebuffers are removed before allocating an MMIO address.
Then the default framebuffer MMIO address should always be available, and
there's never any confusion about which framebuffer address the kdump
kernel should use -- it's always the original address provided by
the Hyper-V host. This approach is already used by the hyperv_drm
driver, and is consistent with the usage guidelines at the head of
the module with the function aperture_remove_conflicting_devices().
This approach also solves a related minor problem when kexec_load()
is used to load the kdump kernel. With current code, unbinding and
rebinding the hyperv_fb driver could result in the framebuffer moving
back to the default framebuffer address, because on the rebind there
are no conflicts. If such a move is done after the kdump kernel is
loaded with the new framebuffer address, at kdump time it could again
have the wrong address.
This problem and fix are described in terms of the kdump kernel, but
it can also occur with any kernel started via kexec.
See extensive discussion of the problem and solution at [2].
[1] https://lore.kernel.org/linux-hyperv/20201014092429.1415040-1-kasong@redhat.com/
[2] https://lore.kernel.org/linux-hyperv/BLAPR10MB521793485093FDB448F7B2E5FDE92@BLAPR10MB5217.namprd10.prod.outlook.com/
Reported-by: Thomas Tai <thomas.tai@oracle.com>
Fixes: c25a19afb8 ("fbdev/hyperv_fb: Do not clear global screen_info")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250218230130.3207-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250218230130.3207-1-mhklinux@outlook.com>
Add the initial nova-core driver stub.
nova-core is intended to serve as a common base for nova-drm (the
corresponding DRM driver) and the vGPU manager VFIO driver, serving as a
hard- and firmware abstraction layer for GSP-based NVIDIA GPUs.
The Nova project, including nova-core and nova-drm, in the long term,
is intended to serve as the successor of Nouveau for all GSP-based GPUs.
The motivation for both, starting a successor project for Nouveau and
doing so using the Rust programming language, is documented in detail
through a previous post on the mailing list [1], an LWN article [2] and a
talk from LPC '24.
In order to avoid the chicken and egg problem to require a user to
upstream Rust abstractions, but at the same time require the Rust
abstractions to implement the driver, nova-core kicks off as a driver
stub and is subsequently developed upstream.
Link: https://lore.kernel.org/dri-devel/Zfsj0_tb-0-tNrJy@cassiopeiae/T/#u [1]
Link: https://lwn.net/Articles/990736/ [2]
Link: https://youtu.be/3Igmx28B3BQ?si=sBdSEer4tAPKGpOs [3]
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250306222336.23482-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When a Hyper-V framebuffer device is removed, or the driver is unbound
from a device, any allocated and/or mapped memory must be released. In
particular, MMIO address space that was mapped to the framebuffer must
be unmapped. Current code unmaps the wrong address, resulting in an
error like:
[ 4093.980597] iounmap: bad address 00000000c936c05c
followed by a stack dump.
Commit d21987d709 ("video: hyperv: hyperv_fb: Support deferred IO for
Hyper-V frame buffer driver") changed the kind of address stored in
info->screen_base, and the iounmap() call in hvfb_putmem() was not
updated accordingly.
Fix this by updating hvfb_putmem() to unmap the correct address.
Fixes: d21987d709 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250209235252.2987-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250209235252.2987-1-mhklinux@outlook.com>
Add driver for backlight controllers attached via Apple DWI 2-wire
interface, which is found on some Apple iPhones, iPads and iPod touches
with a LCD display.
Although there is an existing apple_bl driver, it is for backlight
controllers on Intel Macs attached via PCI, which is completely different
from the Samsung-derived DWI block.
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250214040306.16312-3-towinchenmi@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Lockdep detects the following issue on led-backlight removal:
[ 142.315935] ------------[ cut here ]------------
[ 142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80
...
[ 142.500725] Call trace:
[ 142.503176] led_sysfs_enable+0x54/0x80 (P)
[ 142.507370] led_bl_remove+0x80/0xa8 [led_bl]
[ 142.511742] platform_remove+0x30/0x58
[ 142.515501] device_remove+0x54/0x90
...
Indeed, led_sysfs_enable() has to be called with the led_access
lock held.
Hold the lock when calling led_sysfs_disable().
Fixes: ae232e45ac ("backlight: add led-backlight driver")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20250122091914.309533-1-herve.codina@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Fixes:
- omap: use threaded IRQ for LCD DMA
- omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
- vga16fb: fix orig_video_isVGA confusion
Updates & cleanups:
- hdmi: Remove unused hdmi_infoframe_check
- omapfb: Remove unused hdmi5_core_handle_irqs
- omapfb: Use of_property_present() to test existence of DT property
- omapfb: Use syscon_regmap_lookup_by_phandle_args
- efifb: Change the return value type to void
- lcdcfb: Use backlight helper
- udlfb: Use const 'struct bin_attribute' callback
- radeon: Use const 'struct bin_attribute' callbacks
- sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5JCzAAKCRD3ErUQojoP
X30VAQDHzOIHbxuVfLpiXKfqCGlQgldEIpq7ckxIdh+8Oz3qrgD9G5fuAI4Y6BTN
8ReqS4SP7L9sO3jar/h+b26qFw9rKgY=
=frdX
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Fixes:
- omap: use threaded IRQ for LCD DMA
- omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
- vga16fb: fix orig_video_isVGA confusion
Updates & cleanups:
- hdmi: Remove unused hdmi_infoframe_check
- omapfb:
- Remove unused hdmi5_core_handle_irqs
- Use of_property_present() to test existence of DT property
- Use syscon_regmap_lookup_by_phandle_args
- efifb: Change the return value type to void
- lcdcfb: Use backlight helper
- udlfb: Use const 'struct bin_attribute' callback
- radeon: Use const 'struct bin_attribute' callbacks
- sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()"
* tag 'fbdev-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: lcdcfb: Use backlight helper
fbdev: vga16fb: fix orig_video_isVGA confusion
fbdev: omapfb: Use syscon_regmap_lookup_by_phandle_args
fbdev: omapfb: Use of_property_present() to test existence of DT property
fbdev: sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()
fbdev: omap: use threaded IRQ for LCD DMA
fbdev: omapfb: Fix an OF node leak in dss_of_port_get_parent_device()
fbdev: efifb: Change the return value type to void
fbdev: omapfb: Remove unused hdmi5_core_handle_irqs
video: hdmi: Remove unused hdmi_infoframe_check
fbdev: radeon: Use const 'struct bin_attribute' callbacks
fbdev: udlfb: Use const 'struct bin_attribute' callback
At some point the orig_video_isVGA field of screen_info was repurposed
for video type. Using it directly for video type check is unsafe as it can
still mean yes (1) or no-output (0) in certain configurations. I had one of those.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
of_property_read_bool() should be used only on boolean properties.
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
When using touchscreen and framebuffer, Nokia 770 crashes easily with:
BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000
Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd
CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2
Hardware name: Nokia 770
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x54/0x5c
dump_stack_lvl from __schedule_bug+0x50/0x70
__schedule_bug from __schedule+0x4d4/0x5bc
__schedule from schedule+0x34/0xa0
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4
__mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4
clk_prepare_lock from clk_set_rate+0x18/0x154
clk_set_rate from sossi_read_data+0x4c/0x168
sossi_read_data from hwa742_read_reg+0x5c/0x8c
hwa742_read_reg from send_frame_handler+0xfc/0x300
send_frame_handler from process_pending_requests+0x74/0xd0
process_pending_requests from lcd_dma_irq_handler+0x50/0x74
lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130
__handle_irq_event_percpu from handle_irq_event+0x28/0x68
handle_irq_event from handle_level_irq+0x9c/0x170
handle_level_irq from generic_handle_domain_irq+0x2c/0x3c
generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c
omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c
generic_handle_arch_irq from call_with_stack+0x1c/0x24
call_with_stack from __irq_svc+0x94/0xa8
Exception stack(0xc5255da0 to 0xc5255de8)
5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248
5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94
5de0: 60000013 ffffffff
__irq_svc from clk_prepare_lock+0x4c/0xe4
clk_prepare_lock from clk_get_rate+0x10/0x74
clk_get_rate from uwire_setup_transfer+0x40/0x180
uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c
spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664
spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498
__spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8
__spi_sync from spi_sync+0x24/0x40
spi_sync from ads7846_halfd_read_state+0x5c/0x1c0
ads7846_halfd_read_state from ads7846_irq+0x58/0x348
ads7846_irq from irq_thread_fn+0x1c/0x78
irq_thread_fn from irq_thread+0x120/0x228
irq_thread from kthread+0xc8/0xe8
kthread from ret_from_fork+0x14/0x28
As a quick fix, switch to a threaded IRQ which provides a stable system.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
dss_of_port_get_parent_device() leaks an OF node reference when i >= 2
and struct device_node *np is present. Since of_get_next_parent()
obtains a reference of the returned OF node, call of_node_put() before
returning NULL.
This was found by an experimental verifier that I am developing, and no
runtime test was able to be performed due to that lack of actual
devices.
Fixes: f76ee892a9 ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Helge Deller <deller@gmx.de>
hdmi5_core_handle_irqs() has been unused since
commit f5bab22291 ("OMAPDSS: HDMI: Add OMAP5 HDMI support")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Helge Deller <deller@gmx.de>
hdmi_infoframe_check() has been unused since it was added in
commit c5e69ab35c ("video/hdmi: Constify infoframe passed to the pack
functions")
Remove it.
Note that the individual check functions for each type are
actually used, so they're staying.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The sysfs core now provides callback variants that explicitly take a
const pointer. Make use of it to match the attribute definitions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Helge Deller <deller@gmx.de>
The sysfs core now provides callback variants that explicitly take a
const pointer. Make use of it to match the attribute definition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Helge Deller <deller@gmx.de>
drm-misc-fixes for v6.13-rc4:
- udma-buf fixes related to sealing.
- dma-buf build warning fix when debugfs is not enabled.
- Assorted drm/panel fixes.
- Correct error return in drm_dp_tunnel_mgr_create.
- Fix even more divide by zero in drm_mode_vrefresh.
- Fix FBDEV dependencies in Kconfig.
- Documentation fix for drm_sched_fini.
- IVPU NULL pointer, memory leak and WARN fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0763051-87b7-483e-89e0-a9f993383450@linux.intel.com
Do not select BACKLIGHT_CLASS_DEVICE from FB_BACKLIGHT. The latter
only controls backlight support within fbdev core code and data
structures.
Make fbdev drivers depend on BACKLIGHT_CLASS_DEVICE and let users
select it explicitly. Fixes warnings about recursive dependencies,
such as
error: recursive dependency detected!
symbol BACKLIGHT_CLASS_DEVICE is selected by FB_BACKLIGHT
symbol FB_BACKLIGHT is selected by FB_SH_MOBILE_LCDC
symbol FB_SH_MOBILE_LCDC depends on FB_DEVICE
symbol FB_DEVICE depends on FB_CORE
symbol FB_CORE is selected by DRM_GEM_DMA_HELPER
symbol DRM_GEM_DMA_HELPER is selected by DRM_PANEL_ILITEK_ILI9341
symbol DRM_PANEL_ILITEK_ILI9341 depends on BACKLIGHT_CLASS_DEVICE
BACKLIGHT_CLASS_DEVICE is user-selectable, so making drivers adapt to
it is the correct approach in any case. For most drivers, backlight
support is also configurable separately.
v3:
- Select BACKLIGHT_CLASS_DEVICE in PowerMac defconfigs (Christophe)
- Fix PMAC_BACKLIGHT module dependency corner cases (Christophe)
v2:
- s/BACKLIGHT_DEVICE_CLASS/BACKLIGHT_CLASS_DEVICE (Helge)
- Fix fbdev driver-dependency corner case (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216074450.8590-2-tzimmermann@suse.de
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- omapfb: Remove unused code (Dr. David Alan Gilbert)
- sh7760fb: Fix memory leak in error path of sh7760fb_alloc_mem()
(Zhen Lei)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ0NgWQAKCRD3ErUQojoP
X8N1AP0SkfDr1Bb3BguOdUhkjcM4+lj7tWpABKb3BeYxc88RVQD/c9cdx/7iZ/fH
3AzYuMNugczCwGduTUdMGbCirCrTzA0=
=k/89
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- omapfb: Remove unused code (Dr. David Alan Gilbert)
- sh7760fb: Fix memory leak in error path of sh7760fb_alloc_mem() (Zhen
Lei)
* tag 'fbdev-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: omapfb: Remove some deadcode
fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()
- Introduced new LCD_POWER_ constants to decouple the LCD subsystem from fbdev.
- Several drivers were updated to use the new LCD_POWER_ constants.
- Clarified the semantics of the lcd_ops.controls_device callback.
- Removed unnecessary includes and dependencies.
- Removed unused notifier functionality.
- Simplified code with scoped for-each loops.
- Fixed module autoloading for the ktz8866 driver.
- Updated device tree bindings to yaml format.
- Minor cleanups and improvements in various drivers.
-----BEGIN PGP SIGNATURE-----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=9n4l
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Improve handling of LCD power states and interactions with the fbdev
subsystem
- Introduce new LCD_POWER_ constants to decouple the LCD subsystem from
fbdev
- Update several drivers to use the new LCD_POWER_ constants
- Clarify the semantics of the lcd_ops.controls_device callback
- Remove unnecessary includes and dependencies
- Remove unused notifier functionality
- Simplify code with scoped for-each loops
- Fix module autoloading for the ktz8866 driver
- Update device tree bindings to yaml format
- Minor cleanups and improvements in various drivers
* tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits)
MAINTAINERS: Use Daniel Thompson's korg address for Backlight work
dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml
backlight: Remove notifier
backlight: ktz8866: Fix module autoloading
backlight: 88pm860x_bl: Simplify with scoped for each OF child loop
backlight: lcd: Do not include <linux/fb.h> in lcd header
backlight: lcd: Remove struct fb_videomode from set_mode callback
backlight: lcd: Replace check_fb with controls_device
HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: omap: Use lcd power constants
fbdev: imxfb: Use lcd power constants
fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: clps711x-fb: Use lcd power constants
fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev
backlight: tdo24m: Use lcd power constants
backlight: platform_lcd: Use lcd power constants
backlight: platform_lcd: Remove match_fb from struct plat_lcd_data
backlight: platform_lcd: Remove include statement for <linux/backlight.h>
backlight: otm3225a: Use lcd power constants
backlight: ltv350qv: Use lcd power constants
...
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+
-----BEGIN PGP SIGNATURE-----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=8cUI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of rework, the panic helper support is being added to
more drivers, v3d gets support for HW superpages, scheduler
documentation, drm client and video aperture reworks, some new
MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel
has some Pantherlake enablement and xe is getting some SRIOV bits, but
just lots of stuff everywhere.
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+"
* tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits)
drm/xe/guc: Fix dereference before NULL check
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/amd/amdgpu: limit single process inside MES
drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: Support vcn and jpeg error info parsing
drm/amd : Update MES API header file for v11 & v12
drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling
drm/amdkfd: change kfd process kref count at creation
drm/amdgpu: Cleanup shift coding style
drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data
drm/amdgpu: Implement virt req_ras_err_count
drm/amdgpu: VF Query RAS Caps from Host if supported
drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry
drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support
drm/amd/display: 3.2.309
drm/amd/display: Adjust VSDB parser for replay feature
...
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
The only real core work we've got this time around is the completion of
the transition to the new host/target naming for the core APIs, Kconfig
still needs doing but that's a lot less invasive. Otherwise the big
changes are the new drivers that have been added:
- Completion of the conversion to spi_alloc_host()/_target() and
removal of the old naming.
- Cleanups for Rockchip drivers, these brought in a new logging helper
in the driver core for warnings during probe.
- Support for configuration of the word delay via spidev_test.
- Support for AMD HID2 controllers, Apple SPI controller and Realtek
SPI-NAND controllers.
The Rockchip cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7QdQACgkQJNaLcl1U
h9A7KAf+Od8ORLheHKrokFYWEW1zuiR45EjqWylLk835d3TQn/VfLOouRDhOPKLw
wmxy5PjjvI+CHa9JY4TXY6iRTCc8By6fkwRWFZN5KApSC2NQriWiqgTSItFfYiLv
yUthZjfRhbfSpf6E/0hq4axpfn+6W/MIWUg7Ag08IEU+GhDd+um8gdpBKsP1BAJF
s34Fn3oJNoze0Wwcq5tZ91S1MsP+2vGFGIGC2HA7G2GAXjGFqBZUnIL+zjC1US3j
XILAoy4Vx4J0Nn+f+zdGL2m5cm6O49ztaKqUxamVFigwM4va5OSOEpcnFMEPZ8HY
013dIg7tiayUTOTcByCpzfMDWuzHig==
=jc6e
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The only real core work we've got this time around is the completion
of the transition to the new host/target naming for the core APIs,
Kconfig still needs doing but that's a lot less invasive.
Otherwise the big changes are the new drivers that have been added:
- Completion of the conversion to spi_alloc_host()/_target() and
removal of the old naming.
- Cleanups for Rockchip drivers, these brought in a new logging
helper in the driver core for warnings during probe.
- Support for configuration of the word delay via spidev_test.
- Support for AMD HID2 controllers, Apple SPI controller and Realtek
SPI-NAND controllers"
* tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits)
spi: imx: support word delay
spi: imx: pass struct spi_transfer to prepare_transfer()
spi: cs42l43: Add GPIO speaker id support to the bridge configuration
spi: Delete useless checks
spi: apple: Remove unnecessary .owner for apple_spi_driver
spi: spidev_test: add support for word delay
spi: apple: Add driver for Apple SPI controller
spi: dt-bindings: apple,spi: Add binding for Apple SPI controllers
spi: Use of_property_present() for non-boolean properties
spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time
spi: spi-mem: rtl-snand: Correctly handle DMA transfers
spi: tegra210-quad: Avoid shift-out-of-bounds
spi: axi-spi-engine: Emit trace events for spi transfers
dt-bindings: spi: sprd,sc9860-spi: convert to YAML
spi: Replace deprecated PCI functions
spi: dt-bindings: samsung: Add a compatible for samsung,exynos8895-spi
spi: spi-mem: Add Realtek SPI-NAND controller
dt-bindings: spi: Add realtek,rtl9301-snand
spi: make class structs const
spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema
...
commit f76ee892a9 ("omapfb: copy omapdss & displays for omapfb")
took a copy of the omapdrm code into omapfb, however at that point
a couple of functions were already unused at that point.
Remove dispc_mgr_get_clock_div() and dispc_enable_fifomerge() from
the omapfb copy.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Helge Deller <deller@gmx.de>
When information such as info->screen_base is not ready, calling
sh7760fb_free_mem() does not release memory correctly. Call
dma_free_coherent() instead.
Fixes: 4a25e41831 ("video: sh7760fb: SH7760/SH7763 LCDC framebuffer driver")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/87bjzab5sd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The fb_io_mmap() function is used in the file operations but
not enabled in all configurations unless FB_IOMEM_FOPS gets
selected:
ld.lld-20: error: undefined symbol: fb_io_mmap
referenced by wm8505fb.c
drivers/video/fbdev/wm8505fb.o:(wm8505fb_ops) in archive vmlinux.a
Fixes: 11754a5046 ("fbdev/wm8505fb: Initialize fb_ops to fbdev I/O-memory helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
This driver is no longer used on any platform. It has been replaced by
tilcdc on the two DaVinci boards we still support and can be removed.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
'struct sbus_mmap_map' are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increases overall security.
Update sbusfb_mmap_helper() accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
2452 536 16 3004 bbc drivers/video/fbdev/bw2.o
After:
=====
text data bss dec hex filename
2500 483 16 2999 bb7 drivers/video/fbdev/bw2.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Fix the indentation to ensure consistent code style and improve
readability, and to fix this warning:
drivers/video/fbdev/nvidia/nv_hw.c:1512 NVLoadStateExt() warn:
inconsistent indenting
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The sstfb driver currently depends on CONFIG_FB_DEVICE to create sysfs
entries and access info->dev. This patch wraps the relevant code blocks
with #ifdef CONFIG_FB_DEVICE, allowing the driver to be built and used
even if CONFIG_FB_DEVICE is not selected.
The sysfs setting only controls the VGA pass-through state and is not
required for the display to work correctly.
(See: http://vogonswiki.com/index.php/VGA_passthrough_cable
for more information.)
Added some fixes from Thomas Zimmermann.
Signed-off-by: Gonzalo Silvalde Blanco <gonzalo.silvalde@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
drm-misc-next for v6.13:
UAPI Changes:
- Add drm fdinfo support to panthor, and add sysfs knob to toggle.
Cross-subsystem Changes:
- Convert fbdev drivers to use backlight power constants.
- Some small dma-fence fixes.
- Some kernel-doc fixes.
Core Changes:
- Small drm client fixes.
- Document requirements that you need to file a bug before marking a test as flaky.
- Remove swapped and pinned bo's from TTM lru list.
Driver Changes:
- Assorted small fixes to panel/elida-kd35t133, nouveau, vc4, imx.
- Fix some bridges to drop cached edids on power off.
- Add Jenson BL-JT60050-01A, Samsung s6e3ha8 & AMS639RQ08 panels.
- Make 180° rotation work on ilitek-ili9881c, even for already-rotated
panels.
-
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/panthor/panthor_drv.c
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8dc111ca-d20c-4e0d-856e-c12d208cbf2a@linux.intel.com
backlight_register_notifier and backlight_unregister_notifier have
been unused since commit 6cb634d0dc ("ACPI: video: Remove code to
unregister acpi_video backlight when a native backlight registers")
With those not being called, it means that the backlight_notifier
list is always empty.
Remove the functions, the list itself and the enum used in the
notifications.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20240919232758.639925-1-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/video/fbdev to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
