The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
* Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective subsystems. Only 5
(out of the original 50) will remain in kernel/sysctl.c file; these handle
either sysctl or common arch variables.
By decentralizing sysctl registrations, subsystem maintainers regain control
over their sysctl interfaces, improving maintainability and reducing the
likelihood of merge conflicts.
* docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented in the
check-sysctl-docs script. This script can now be used to automatically
identify if documentation is missing.
* Testing
All these have been in linux-next since rc3, giving them a solid 3 to 4 weeks
worth of testing. Additionally, sysctl selftests and kunit were also run
locally on my x86_64
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEErkcJVyXmMSXOyyeQupfNUreWQU8FAmiAvd8ACgkQupfNUreW
QU+9nAv/dtxaKoL4BXJSzsA2+49bbo9QfiK5Vjz1wSRYRQTb+jhGr9QdS5hG+NeX
uN2ilvcNQqW7ENdiblU10lvcbPjIn2hw4lbMcpv/+QXnrudtGYlBFXlkWqW5nv7X
AVvHU8y3uzfs6JbRIpROUA7Cn2cDOlfP2mMtwxCXR3iP+orS1ziuVEi1JRoirIyG
iq5I/1rJMJBU3FjqqDTq6yljspLx8AlXO1yc5xUxAM67IcY4ew3ZTxqiZr6M9AhV
DUbR2lu/88wcFNERt8DJmuQ50dSGGqOEpK3FURTmkwtMFxzNLmenFDQeBKKahz3Q
2ntXSDfp2y+ppZNmcOP8tZZkra03Xpy1DQyoOgQ2r9uGekPxyr+wmKXwYPOeJIPO
YWTNBm8omX9qr49zVzaZ1f2foRGfgStHL6aa6xLIf34zzScSDEPtO3og2+5Hw/30
gnp+7v9E19uKpoE6oiGE0PtiFzAi/I6nFxzG2RRqrlMLFXyKVccTKygzY6tCnI3P
6144s/Bt
=R369
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeWPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymQHgCfR3KXFe7ElzXQqjJhtN/ej6IPijIAoI6k3g0m
4UewNOIef9XpIAJ8zuoo
=850o
-----END PGP SIGNATURE-----
Merge tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq
driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS
entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant
Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT cpuidle
driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the device
suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in the
runtime PM framework and update its documentation (Sakari Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power capping
driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/wC4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1O6MIAJtfclAleksv+PzbEyC+yk72zKinJg35
WJUk4Kz1yMOqAPazbpXRXt1tuxqyB3HWeixnTFyZbz+bbhZjYJ0lvpWGkdsFaS0i
NSbILSpHNGtOrP6s6hVKTBmLAdAzdWYWMQizlWgGrkhOiN5BnQzL7pAi2aGqu9KS
tGqnIg/3QwBAvnxijgpkm7qozOUMPJ9dzSvxMaFeB6JH7SNbTOODVFtsoD+mbJlH
YVMMWxih8b4MRJgAo4N2bL1Glp/Qnwg4ACawnQokt8Rknbtwku57QF9YwTbubr36
Ok7qbNnUSx0h9KtMQQNogLLkFreTJkbGknVWEwaWWhXNeW9l4cr6MWo=
=xVF9
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
I am switching my address to a personal domain, so some files in the
SGI IP30 and IOC3 files need to be updated. I will send updates for
the MAINTAINERS file and rtc-ds1685 separately to linux-rtc.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When the PSLVERR_RESP_EN parameter is set to 1, the device generates
an error response if an attempt is made to read an empty RBR (Receive
Buffer Register) while the FIFO is enabled.
In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,
UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes
dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter
function enables the FIFO via serial_out(p, UART_FCR, p->fcr).
Execution proceeds to the serial_port_in(port, UART_RX).
This satisfies the PSLVERR trigger condition.
When another CPU (e.g., using printk()) is accessing the UART (UART
is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==
(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter
dw8250_force_idle().
Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock
to fix this issue.
Panic backtrace:
[ 0.442336] Oops - unknown exception [#1]
[ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a
[ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e
...
[ 0.442416] console_on_rootfs+0x26/0x70
Fixes: c49436b657 ("serial: 8250_dw: Improve unwritable LCR workaround")
Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move both sysrq ctl_table and supported sysrq_sysctl_handler helper
function into drivers/tty/sysrq.c. Replaced the __do_proc_dointvec in
helper function with do_proc_dointvec_minmax as the former is local to
kernel/sysctl.c. Here we use the minmax version of do_proc_dointvec
because do_proc_dointvec is static and calling do_proc_dointvec_minmax
with a NULL min and max is the same as calling do_proc_dointvec.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
The maximum number of keycodes got bumped to 256 a very long time ago,
but the default keymaps were never adjusted to match. This is causing
the kernel to interpret keycodes above 127 as U+0000 if the shipped
generated keymap is used.
Fix this by mapping all keycodes above 127 to K_HOLE so the kernel
ignores them.
The contents of this patche were generated by rerunning `loadkeys
--mktable --unicode` and only including the changes to map keycodes
above 127 to K_HOLE.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Cc: stable <stable@kernel.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250702-vt-misc-unicode-fixes-v1-2-c27e143cc2eb@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't process Unicode characters if the virtual terminal is in raw
mode, so there's no reason why we shouldn't do the same for K_OFF
(especially since people would expect K_OFF to actually turn off all VT
key processing).
Fixes: 9fc3de9c83 ("vt: Add virtual console keyboard mode OFF")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Cc: stable <stable@kernel.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250702-vt-misc-unicode-fixes-v1-1-c27e143cc2eb@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qualcomm automotive SA8255p SoC relies on firmware to configure
platform resources, including clocks, interconnects and TLMM.
The driver requests resources operations over SCMI using power
and performance protocols.
The SCMI power protocol enables or disables resources like clocks,
interconnect paths, and TLMM (GPIOs) using runtime PM framework APIs,
such as resume/suspend, to control power states(on/off).
The SCMI performance protocol manages UART baud rates, with each baud
rate represented by a performance level. The driver uses the
dev_pm_opp_set_level() API to request the desired baud rate by
specifying the performance level.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
Link: https://lore.kernel.org/r/20250721174532.14022-9-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GENI serial driver currently handles power resource management
through calls to the statically defined geni_serial_resources_on() and
geni_serial_resources_off() functions. This approach reduces modularity
and limits support for platforms with diverse power management
mechanisms, including resource managed by firmware.
Improve modularity and enable better integration with platform-specific
power management, introduce support for runtime PM. Use
pm_runtime_resume_and_get() and pm_runtime_put_sync() within the
qcom_geni_serial_pm() callback to control resource power state
transitions based on UART power state changes.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
Link: https://lore.kernel.org/r/20250721174532.14022-8-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Facilitates future modifications within the new function,
leading to better readability and maintainability of the code.
Move the code that handles the actual logic of clock-rate
calculations to a separate function geni_serial_set_rate()
which enhances code readability.
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
Link: https://lore.kernel.org/r/20250721174532.14022-7-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Supports use in PM system/runtime frameworks, helping to distinguish new
resource control mechanisms and facilitate future modifications within
the new API.
The code that handles the actual enable or disable of resources like clock
and ICC paths to a separate function (geni_serial_resources_on() and
geni_serial_resources_off()) which enhances code readability.
Introduced minor return checks in newly added function APIs to enhance
error detection and prevent silent failures.
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
Link: https://lore.kernel.org/r/20250721174532.14022-6-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enhances code readability and future modifications within the new API.
Move the code that handles the actual initialization of resources
like clock and ICC paths to a separate function, making the
probe function cleaner.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
Link: https://lore.kernel.org/r/20250721174532.14022-5-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake of 'notifer' in the comment which
should be 'notifier'.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/BD4804BF4FBA1648+20250722073431.21983-6-wangyuli@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On i386, when
CONFIG_X86_INTEL_CE=y
# CONFIG_SERIAL_8250 is not set
it will try to compile the driver and use the stub simultaneously.
This breaks the build. Fix it by making sure that the driver
compiles only when CONFIG_SERIAL_8250 is also enabled.
On top of that ensure that CONFIG_SERIAL_8250 is actually set to 'y'
and not 'm' as the later makes no sense for this platform. The hook
may only be applied during early boot.
Fixes: acc902de05 ("serial: 8250: Move CE4100 quirks to a module under 8250 driver")
Fixes: 5ec6960f6f ("ce4100: Add errata fixes for UART on CE4100")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/r/cdf4ee46-7bf8-4379-9245-fed9db72e7e8@infradead.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250716142412.1667927-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmh9azkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7GIH/0lpQtHRl6N+q2Qs
v75iG2ZouWyw2JlhUOHAToKU58MZqqTXLZzc8ZdY6fAd7DpXWKRGSDsyWVyLbUkt
UKGzXEIJsHXYvw2QIPbhkY9gQBWpdZTh4tHztFyKb0QLn81qkibVP6ChOwSzOGa/
xUyQ5v6yH+JvQlnQaCgy6hi7cMrLNSNZmuIjy0yc5Y153YPEtX5OUPO2PstpUx5r
AuiOhU4ewW9QCe07X/Pk7tdn0T2Jg8Kwk1FViaM0RBUf/0GXGfsovIxpUP/eCyMc
MA+9SXXLlDa/4Z8w3EsQYx6m2MnNmm0HPeevCmWqq3+Ocooik4si1BpzHfUaE6n/
/0D8zBg=
=NzEi
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc7' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to call need_resched() because cond_resched() will do
nothing if need_resched() returns false.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/5a11ad09-5508-933c-f044-6a236bf00557@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Renesas SuperH SCI(F) serial port driver from
SIMPLE_DEV_PM_OPS() to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr().
This lets us drop the __maybe_unused annotations from its suspend and
resume callbacks, and reduces kernel size in case CONFIG_PM or
CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a5628fe028362ae3f8729021a7864dd39f7869bf.1752086885.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define a new RSCI port type, and the RSCI 32 bits registers set.
The RZ/T2H SCI has a a fifo, and a quite different set of registers
from the original SH SCI ones.
DMA is not supported yet.
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250630202323.279809-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New port types cannot be added in serial_core.h, which is shared with
userspace.
In order to support new port types, the coming new ones will have
BIT(7) set in the id value, and in this case, uartport->type is
set to PORT_GENERIC.
This commit therefore changes all the places where the port type is
read, by not relying on uartport->type but on the private
value stored in struct sci_port.
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250630202323.279809-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace direct calls to sci_stop_rx() and sci_stop_tx() with port ops
callbacks in sci_shutdown(). This enables the RSCI driver, which reuses
the SCI core but implements its own stop_rx and stop_tx logic, to reuse
sci_shutdown() without duplicating code.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250630202323.279809-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In one place in ce4100_mem_serial_in() the code may be replaced with
mem_serial_in() call. Do it so and collapse two conditionals into one.
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250701134200.2621898-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dma_sync_sg_for_device() functions should be called with the same
nents as the dma_map_sg(), not the value the map function returned
according to the documentation in Documentation/core-api/dma-api.rst:450:
With the sync_sg API, all the parameters must be the same
as those passed into the sg mapping API.
Fixes: da3564ee02 ("pch_uart: add multi-scatter processing")
Cc: stable <stable@kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250701113452.18590-2-fourier.thomas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the OF node reference taken when initialising the
control and port devices when the devices are later released.
Fixes: d36f0e9a00 ("serial: core: restore of_node information in sysfs")
Cc: Aidan Stewart <astewart@tektelic.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250708085817.16070-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling dev_pm_domain_attach()/dev_pm_domain_detach() in bus driver
probe/remove functions can affect system behavior when the drivers
attached to the bus use devres-managed resources. Since devres actions
may need to access device registers, calling dev_pm_domain_detach() too
early, i.e., before these actions complete, can cause failures on some
systems. One such example is Renesas RZ/G3S SoC-based platforms.
If the device clocks are managed via PM domains, invoking
dev_pm_domain_detach() in the bus driver's remove function removes the
device's clocks from the PM domain, preventing any subsequent
pm_runtime_resume*() calls from enabling those clocks.
The second argument of dev_pm_domain_attach() specifies whether the PM
domain should be powered on during attachment. Likewise, the second
argument of dev_pm_domain_detach() indicates whether the domain should be
powered off during detachment.
Upcoming changes address the issue described above (initially for the
platform bus only) by deferring the call to dev_pm_domain_detach() until
after devres_release_all() in device_unbind_cleanup(). The detach_power_off
field in struct dev_pm_info stores the detach power off info from the
second argument of dev_pm_domain_attach().
Because there are cases where the device's PM domain power-on/off behavior
must be conditional (e.g., in i2c_device_probe()), the patch introduces
PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF flags to be passed
to dev_pm_domain_attach().
Finally, dev_pm_domain_attach() and its users are updated to use the newly
introduced PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF macros.
This change is preparatory.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250703112708.1621607-2-claudiu.beznea.uj@bp.renesas.com
[ rjw: Changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is inconvenient for maintainers and maintainership to have
some quirks under architectural code. Move it to the specific quirk
file like other 8250-compatible drivers do.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250627182743.1273326-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'struct lpuart_soc_data' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security.
This also makes the code more consistent.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
172668 23470 128 196266 2feaa drivers/tty/serial/fsl_lpuart.o
After:
=====
text data bss dec hex filename
172924 23214 128 196266 2feaa drivers/tty/serial/fsl_lpuart.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/93dc860a06f92236db283c71be0640cc477b7291.1751092467.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7a637784d5 ("serial: imx: reduce RX interrupt frequency")
introduced a regression on the i.MX6UL EVK board. The issue can be
reproduced with the following steps:
- Open vi on the board.
- Paste a text file (~150 characters).
- Save the file, then repeat the process.
- Compare the sha256sum of the saved files.
The checksums do not match due to missing characters or entire lines.
Fix this by restoring the RXTL value to 1 when the UART is used as a
console.
This ensures timely RX interrupts and reliable data reception in console
mode.
With this change, pasted content is saved correctly, and checksums are
always consistent.
Cc: stable <stable@kernel.org>
Fixes: 7a637784d5 ("serial: imx: reduce RX interrupt frequency")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check for "port.type == PORT_8250_CIR" is present twice in
serial8250_register_8250_port(). The latter was already tried to be
dropped by 1104321a7b ("serial: Delete dead code for CIR serial
ports") and then reverted by 9527b82ae3 ("Revert "serial: Delete dead
code for CIR serial ports"").
Document this weirdness with a reason.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/all/aFcDOx1bdB34I5hS@surfacebook.localdomain/
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250624080641.509959-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are already variables like 'iir_noint1' and 'iir_noint2'. Follow
the preexisting lowercase naming of variables. So s/lsr_TEMT/lsr_temt/
and 'iir_NOINT' likewise.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250624080641.509959-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 795158691c ("serial: 8250: extract
serial8250_initialize()"), split serial8250_initialize() even more --
the TX enable test part of this code can be separated into
serial8250_iir_txen_test().
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250624080641.509959-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 795158691c ("serial: 8250: extract
serial8250_initialize()"), split serial8250_initialize() even more --
the mctrl part of this code can be separated into
serial8250_init_mctrl() -- done now.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250624080641.509959-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RSA functions moved by the below commit to 8250_rsa.c are used in
8250_base.c. Since that can be a module (when CONFIG_SERIAL_8250=m),
this causes build failures:
ERROR: modpost: "rsa_autoconfig" [drivers/tty/serial/8250/8250_base.ko] undefined!
ERROR: modpost: "rsa_reset" [drivers/tty/serial/8250/8250_base.ko] undefined!
ERROR: modpost: "rsa_disable" [drivers/tty/serial/8250/8250_base.ko] undefined!
ERROR: modpost: "rsa_enable" [drivers/tty/serial/8250/8250_base.ko] undefined!
Fix them by exporting the functions. But only to the base module using
EXPORT_SYMBOL_GPL_FOR_MODULES(). (And not to the whole world.)
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20250619165607.33403e19@canb.auug.org.au/
Fixes: 5a128fb475 ("serial: 8250: move RSA functions to 8250_rsa.c")
Link: https://lore.kernel.org/r/20250623061035.436414-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since in v6.8-rc1, the of_node symlink under tty devices is
missing. This breaks any udev rules relying on this information.
Link the of_node information in the serial controller device with the
parent defined in the device tree. This will also apply to the serial
device which takes the serial controller as a parent device.
Fixes: b286f4e87e ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: stable@vger.kernel.org
Signed-off-by: Aidan Stewart <astewart@tektelic.com>
Link: https://lore.kernel.org/r/20250617164819.13912-1-astewart@tektelic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the correct function parameter name in ucs_get_fallback() to prevent
kernel-doc warnings:
Warning: drivers/tty/vt/ucs.c:218 function parameter 'cp' not described in 'ucs_get_fallback'
Warning: drivers/tty/vt/ucs.c:218 Excess function parameter 'base' description in 'ucs_get_fallback'
Fixes: fe26933cf1 ("vt: add ucs_get_fallback()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nicolas Pitre <npitre@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-serial@vger.kernel.org
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>.
Link: https://lore.kernel.org/r/20250611020229.2650595-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Programs using poll() on /dev/vcsa to be notified when VT changes occur
were missing one case: the switch from gfx to text mode.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The serial info sometimes produces negative TX/RX counts. E.g.:
3: uart:FSL_LPUART mmio:0x02970000 irq:46 tx:-1595870545 rx:339619
RTS|CTS|DTR|DSR|CD
It appears that the print format specifiers don't match with the types of
the respective variables. E.g.: All of the fields in struct uart_icount
are u32, but the format specifier used is %d, even though u32 is unsigned
and %d is for signed integers. Update drivers/tty/serial/serial_core.c
to use the proper format specifiers. Reference
https://docs.kernel.org/core-api/printk-formats.html as the documentation
for what format specifiers are the proper ones to use for a given C type.
Signed-off-by: Joseph Tilahun <jtilahun@astranis.com>
Link: https://lore.kernel.org/r/20250610065653.3750067-1-jtilahun@astranis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable the use of the RTS pin for direction control in half-duplex modes to
prevent data collisions. Utilize the rs485 structure and callbacks in the
serial core framework to support half-duplex modes. Implement support for
the TIOCSRS485 IOCTL value and the struct serial_rs485.
Signed-off-by: Anup Kulkarni <quic_anupkulk@quicinc.com>
Link: https://lore.kernel.org/r/20250603110145.3835111-1-quic_anupkulk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current GENI UART driver supports Max Baud rate up to 4 Mbps.
Add support to increase maximum baud rate to 8 Mbps.
Signed-off-by: Jyothi Kumar Seerapu <quic_jseerapu@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523103721.5042-1-quic_jseerapu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are unnecessary "up->port." accesses on many places in 8250_omap.
"port" is avalable on most places, so instead simply use "port->".
And make port available in omap8250_restore_regs() too. It's used on
many places in there.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250611100319.186924-34-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of open-coding the hash table, use the one provided by
hashtable.h. The semantics is the same, except the code needs not to
compute the hash bucket on its own.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250611100319.186924-33-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
