During probe the mailbox channel might not yet be available. Use
dev_err_probe to silence this deferred probe error message:
wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20250509093652.1866566-1-alexander.stein@ew.tq-group.com
Signed-off-by: Nishanth Menon <nm@ti.com>
i.MX8MP UID is actually 128bits and partitioned into two parts.
The 1st 64bits are at 0x410 and 0x420, and 2nd 64bits are at 0xE00
and 0xE10.
Dump the whole 128bits for i.MX8MP, by set soc_uid as an array with two
u64.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cleanup code by introducing soc_uid hook, i.MX8MQ/M/N could reuse
one function imx8m_soc_uid, i.MX8MP could have its own one.
With this patch, it will easy to add 128bits UID support for i.MX8MP.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is a common flow to i.MX8M family, map OCOTP register base and
enable ocotp clk first before read Unique ID from OCOTP.
So introduce imx8m_soc_prepare to do ioremap and enable the ocotp clk,
and introduce imx8m_soc_unprepare to disable the clk and do iounmap.
With this patch, no need to spread the ioremap and clk handling in
each soc_revision hook.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit ad3dd9592b ("soc: qcom: pmic_glink: disable UCSI on sc8280xp")
disabled UCSI shortly after it had been enabled to fix a regression that
was observed on the Lenovo ThinkPad X13s.
Specifically, disconnecting an external display would trigger a system
error and hypervisor reset but no one cared enough to track down the bug
at the time.
The same issue was recently observed on X Elite machines, and commit
f47eba045e ("usb: typec: ucsi: Set orientation as none when connector
is unplugged") worked around the underlying issue by setting the
connector orientation to 'none' on disconnect events to avoid having the
PHY driver crash the machine in one orientation.
Enable UCSI support also on sc8280xp now that the DisplayPort disconnect
crashes are gone.
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250326124944.6338-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add driver for Sophgo CV1800 series SoC RTC subsystem. The RTC module
comprises a 32kHz oscillator, Power-on-Reset (PoR) sub-module, HW state
machine to control chip power-on, power-off and reset. Furthermore, the
8051 subsystem is located within RTCSYS including associated SRAM block.
This patch only populates RTC sub-device.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250315224921.3627852-3-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
The SG2044 TOP device provide PLL clock function in its area.
Add a mfd definition for it.
Link: https://lore.kernel.org/r/20250418020325.421257-3-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
Add a small SOC bus driver to parse the chip ID and revision made
available on VIA/WonderMedia SoCs via their system configuration
controller's SCC_ID register.
This is intended to select appropriate sets of on-chip device quirks
at runtime, as it has been found that even within the same SoC
version there can be register-incompatible differences, such as
with the SDMMC controller on WM8505 rev. A0-A1 vs. rev. A2.
The list of SoC versions is compiled from various vendor source dumps
and not all of them have corresponding mainline driver support.
Some of them also have been seen with varying on-chip markings while
sharing the same hardware chip ID's (as is the case with e.g. WM8850
vs. WM8950). In such cases the selection of names to use here among
those seen in various source dumps and chip markings was arbitrary.
Suggested by Krzysztof at [1] - thanks a lot!
[1] https://lore.kernel.org/all/14de236b-e2a7-4bde-986d-1e5ffddd01b4@kernel.org/
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250503-wmt-soc-driver-v3-2-2daa9056fa10@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This structure was left unused by a previous patch:
drivers/soc/mediatek/mtk-dvfsrc.c:542:43: error: unused variable 'dvfsrc_bw_constr_mt8195' [-Werror,-Wunused-const-variable]
Fixes: b06785283e ("soc: mediatek: mtk-dvfsrc: Rename and move bw constraints data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250423162958.2223689-1-arnd@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the clk-measurer clocks IDs for the Amlogic S4 SoC family.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250415-clk-measure-v3-5-9b8551dd33b4@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the clk-measurer clocks IDs for the Amlogic C3 SoC family.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250415-clk-measure-v3-4-9b8551dd33b4@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Since the MSR_CLK register offset differs between chip variants, we
replace the macro-based definition with chip-specific assignments.
Change the max_register in regmap_config to be retrieved from DTS.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250415-clk-measure-v3-1-9b8551dd33b4@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Drop "CLK_MSR_MAX" and replace it with adding a member "msr_count" in
the structure to specify the count of msr_id.
Mark the table of msr_id as const.
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250205-optimize_memory_size_of_clk_measure-v2-1-4f546053495d@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add JTAG ID information for AM62Lx SoC so as to enable SoC detection in
kernel.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20250417084904.2869369-1-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PCC driver now handles mapping and unmapping of shared memory
areas as part of pcc_mbox_{request,free}_channel(). Without these before,
this Kunpeng HCCS driver did handling of those mappings like several
other PCC mailbox client drivers.
There were redundant operations, leading to unnecessary code. Maintaining
the consistency across these driver was harder due to scattered handling
of shmem.
Just use the mapped shmem and remove all redundant operations from this
driver.
Cc: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add support for the MediaTek Dimensity 1200 (MT6893) SoC's DVFSRC
v2 hardware: the only difference between this and the only other
supported DVFSRCv2 SoC (MT8195) is the VCore-DRAM OPP array.
Link: https://lore.kernel.org/r/20250410144019.475930-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Rename the MT8183 and MT8195 bandwidth constraints data structure
to, respectively, dvfsrc_bw_constr_v1 and dvfsrc_bw_constr_v2, as
the actual constraints are depending on the DVFSRC version rather
than on the SoC.
While at it, to prepare for adding a new SoC, also move the two
structures at the start of the platform data code section.
Link: https://lore.kernel.org/r/20250410144019.475930-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a new Kconfig option, ARCH_R9A09G056, to enable ARM64 platform support
for the Renesas RZ/V2N SoC. Default this option to "y" when ARCH_RENESAS is
enabled, ensuring that support for the RZ/V2N SoC is automatically included.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Instead of setting bit 1 (USI_OPTION_CLKSTOP_ON) during USI unconfiguring,
all the other bits in the USI_OPTION register get inverted, which
should not happen as that means the clock will keep getting provided
to the USI IP. Remove the unnecessary tilde.
Fixes: 11e77776b5 ("soc: samsung: usi: add a routine for unconfiguring the ip")
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250413163755.788907-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Qualcomm's Inline Crypto Engine (ICE) version 3.2 and later includes a
key management hardware block called the Hardware Key Manager (HWKM).
Add support for HWKM to the ICE driver. HWKM provides hardware-wrapped
key support where the ICE (storage) keys are not exposed to software and
instead are protected in hardware. Later patches will wire up this
feature to ufs-qcom and sdhci-msm using the support added in this patch.
HWKM and legacy mode are currently mutually exclusive. The selection of
which mode to use has to be made before the storage driver(s) registers
any inline encryption capable disk(s) with the block layer (i.e.,
generally at boot time) so that the appropriate crypto capabilities can
be advertised to upper layers. Therefore, make the ICE driver select
HWKM mode when the all of the following are true:
- The new module parameter qcom_ice.use_wrapped_keys=1 is specified.
- HWKM is present and is at least v2, i.e. ICE is v3.2.1 or later.
- The SCM calls needed to fully use HWKM are supported by TrustZone.
[EB: merged related patches; fixed the module parameter to work
correctly; dropped unnecessary support for HWKM v1; fixed error
handling; improved log messages, comments, and commit message;
fixed naming; merged enable and init functions; and other cleanups]
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20250404231533.174419-3-ebiggers@kernel.org
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qcom_ice_program_key() currently accepts the key as an array of bytes,
algorithm ID, key size enum, and data unit size. However both callers
have a struct blk_crypto_key which contains all that information. Thus
they both have similar code that converts the blk_crypto_key into the
form that qcom_ice_program_key() wants. Once wrapped key support is
added, the key type would need to be added to the arguments too.
Therefore, this patch changes qcom_ice_program_key() to take in all this
information as a struct blk_crypto_key directly. The calling code is
updated accordingly. This ends up being much simpler, and it makes the
key type be passed down automatically once wrapped key support is added.
Based on a patch by Gaurav Kashyap <quic_gaurkash@quicinc.com> that
replaced the byte array argument only. This patch makes the
blk_crypto_key replace other arguments like the algorithm ID too,
ensuring that there remains only one source of truth.
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20250404231533.174419-2-ebiggers@kernel.org
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/all/20250319105506.203802081@linutronix.de
Enable various Renesas SoCs by default when ARCH_RENESAS is selected.
Adding default y if ARCH_RENESAS to the relevant configurations removes
the need to manually enable individual SoCs in defconfig files.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250401090133.68146-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Conversion was done with Coccinelle. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250313142524.137040686@linutronix.de
This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfv22EACgkQYKtH/8kJ
UicOgBAAq+9CX/Fcvrzu4dHtNphY9JUkO2Jpzvuj9471Yo2E8UAvXFCOBa43gLHr
wCAvH1qF/ID/6UhHDC5tH+dHz5HzRYiIatzwO0V65W6rPhIqSBnLbmO4YGnryRwA
uOx/jd+tdgDJZCn1V0BrvWgYxPC7tE/tk8AJZiHaRG2awpXrRRjtu3WZCEI5+UF6
zoUOJoiesMm+ca9xbDJwhcgKPqnig+7XTHXtYF51JSyFSoxg1dDd9VJbZyq2eAtP
1Lsjwn+kQxywJruxAZFC0xEB3ormAGTchsecTUcf31hdtJfTGgJzanpZPKEX56gM
kxd0pJ2OwjMDN076bUZXmL4yzaC9fK8ecITHS4BKcY4GTtuPTvvYbNMg87Ag0/tr
i3rhZcYple973PM6fl1OztbEBJ2rGvUe10GZ+MTMEPUN24SA252zru55gdfLsIJp
kTRQmkpGjcZ2ZqahqlkBZ7QNVP9/e4C4mbmflLtFfKBID2ON30YFVEy+d2D1AVkm
7EzSvb12ntEb1S+17w6FFmERN7zaDBXG1M3mjecyZ33sEKI92sM9L/AFYkrhWe9b
JNi3h93FCK9CWQRULR2Yos7IHOIOeXVf3tXH4QXiH1mlRmZ9scCc75MqyhkbpR7H
uU7Bq3bhiwhcYeDbkFcyu+rl/9YxgwgW0hujx/WLuJ54V54q2cI=
=ENMh
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"This is the promised follow-up to the soc drivers branch, adding minor
updates to omap and freescale drivers.
Most notably, Ioana Ciornei takes over maintenance of the DPAA bus
driver used in some NXP (originally Freescale) chips"
* tag 'soc-drivers-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
Input: tsc2007 - accept standard properties
- irqdomain cleanups from Jiry
- Add Ioana as Maintainer of fsl-mc bus and remove Laurentiu and Stuart
- Remove deadcode from fsl-mc bus
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQQQ/+b4s5DeF6zCYyNoqS/rAbjdeAUCZ91HWxwcY2hyaXN0b3Bo
ZS5sZXJveUBjc2dyb3VwLmV1AAoJEGipL+sBuN14CT4A/0Pi/m5rSAdYlvumCcBE
XrnZaFJq8JeSc2DWWPxE3yQaAQCdTZNdXQK1wLgvsVc9eAsfnrLYreo+KX56wjvK
c0+YAA==
=y8a5
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=RBvv
-----END PGP SIGNATURE-----
Merge tag 'soc_fsl-6.15-1' of https://github.com/chleroy/linux into soc/drivers-2
FSL SOC Changes for 6.15:
- irqdomain cleanups from Jiry
- Add Ioana as Maintainer of fsl-mc bus and remove Laurentiu and Stuart
- Remove deadcode from fsl-mc bus
* tag 'soc_fsl-6.15-1' of https://github.com/chleroy/linux:
bus: fsl-mc: Remove deadcode
MAINTAINERS: add the linuppc-dev list to the fsl-mc bus entry
MAINTAINERS: fix nonexistent dtbinding file name
MAINTAINERS: add myself as maintainer for the fsl-mc bus
irqdomain: soc: Switch to irq_find_mapping()
This reverts commit 36f5f026df, reversing
changes made to 43a7eec035.
Thomas says:
"I just noticed that for some incomprehensible reason, probably sheer
incompetemce when trying to utilize b4, I managed to merge an outdated
_and_ buggy version of that series.
Can you please revert that merge completely?"
Done.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The at91 platform gains support for SAMA7D65, a new variant of the
Cortex-A7 based SAMA7G5 with a graphics output.
The i.MX, Renesas and davinci platforms each get one minor bugfix.
-----BEGIN PGP SIGNATURE-----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=0NHR
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC arm platform updates from Arnd Bergmann:
"The at91 platform gains support for SAMA7D65, a new variant of the
Cortex-A7 based SAMA7G5 with a graphics output.
The i.MX, Renesas and davinci platforms each get one minor bugfix"
* tag 'soc-arm-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: davinci: always enable CONFIG_ARCH_DAVINCI_DA850
ARM: imx: mark imx53_suspend_sz as unused
ARM: at91: pm: Enable ULP0/ULP1 for SAMA7D65
ARM: at91: pm: Add Backup mode for SAMA7D65
ARM: at91: pm: add DT compatible support for sama7d65
ARM: at91: pm: fix at91_suspend_finish for ZQ calibration
dt-bindings: ARM: at91: add Calao USB boards
dt-bindings: ARM: at91: make separate entry for Olimex board
ARM: at91: Add Support in SoC driver for SAMA7D65
dt-bindings: atmel-sysreg: Add SAMA7D65 Chip ID
ARM: shmobile: rcar-gen2: Remove CMA reservation code
These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware interfaces,
adding support for additional firmware features including SoC
identification and FF-A SRI callbacks as well as various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and Apple chips
There will be a follow up with a few more driver updates that are still
causing build regressions at the moment.
-----BEGIN PGP SIGNATURE-----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=QcjY
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
- Switch the MSI descriptor locking to guards
- Replace the broken PCI/TPH implementation, which lacks any form of
serialization against concurrent modifications with a properly
serialized mechanism in the PCI/MSI core code.
- Replace the MSI descriptor abuse in the SCSI/UFS Qualcom driver with
dedicated driver internal storage.
-----BEGIN PGP SIGNATURE-----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=Vl8Q
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
- Switch the MSI descriptor locking to guards
- Replace the broken PCI/TPH implementation, which lacks any form of
serialization against concurrent modifications with a properly
serialized mechanism in the PCI/MSI core code
- Replace the MSI descriptor abuse in the SCSI/UFS Qualcom driver with
dedicated driver internal storage
* tag 'irq-msi-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Rename msi_[un]lock_descs()
scsi: ufs: qcom: Remove the MSI descriptor abuse
PCI/TPH: Replace the broken MSI-X control word update
PCI/MSI: Provide a sane mechanism for TPH
PCI: hv: Switch MSI descriptor locking to guard()
PCI/MSI: Switch to MSI descriptor locking to guard()
NTB/msi: Switch MSI descriptor locking to lock guard()
soc: ti: ti_sci_inta_msi: Switch MSI descriptor locking to guard()
genirq/msi: Use lock guards for MSI descriptor locking
cleanup: Provide retain_ptr()
genirq/msi: Make a few functions static
Introduce Devicetree binding for providing board-specific firmware-name
for the GENI serial engine block. Add SDM630/636 support in pd-mapper.
Clean up and fix error handling in the SSC block bus driver.
Add missing msm8916-acc compatible to resolve a number of Devicetree
validation errors.
-----BEGIN PGP SIGNATURE-----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=L0ts
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2s7I
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.15
Introduce Devicetree binding for providing board-specific firmware-name
for the GENI serial engine block. Add SDM630/636 support in pd-mapper.
Clean up and fix error handling in the SSC block bus driver.
Add missing msm8916-acc compatible to resolve a number of Devicetree
validation errors.
* tag 'qcom-drivers-for-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
Link: https://lore.kernel.org/r/20250319142448.2279164-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Improve the client interface for the Qualcomm ICE driver to avoid
leaking references, including fixing the client drivers to call the new
function.
Adopt str_on_off() helper in AOSS driver and mark non-global servreg QMI
element info array in the PDR driver static.
-----BEGIN PGP SIGNATURE-----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=mBJ1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=WlxM
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.15
Improve the client interface for the Qualcomm ICE driver to avoid
leaking references, including fixing the client drivers to call the new
function.
Adopt str_on_off() helper in AOSS driver and mark non-global servreg QMI
element info array in the PDR driver static.
* tag 'qcom-drivers-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: Do not expose internal servreg_location_entry_ei array
soc: qcom: ice: make of_qcom_ice_get() static
scsi: ufs: qcom: fix dev reference leaked through of_qcom_ice_get
mmc: sdhci-msm: fix dev reference leaked through of_qcom_ice_get
soc: qcom: ice: introduce devm_of_qcom_ice_get
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM8750 compatible
soc: qcom: Use str_enable_disable-like helpers
Link: https://lore.kernel.org/r/20250317210158.2025380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- ti-sci: Default set to ARCH_K3 for the ti sci driver in preperation for
the driver to be default set as module in defconfig.
- k3-socinfo: Explicitly build up regmap instead of depending on syscon
helper
-----BEGIN PGP SIGNATURE-----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=7W9Q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xZeP
-----END PGP SIGNATURE-----
Merge tag 'ti-driver-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.15
- ti-sci: Default set to ARCH_K3 for the ti sci driver in preperation for
the driver to be default set as module in defconfig.
- k3-socinfo: Explicitly build up regmap instead of depending on syscon
helper
* tag 'ti-driver-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: config: ti-sci: Default set to ARCH_K3 for the ti sci driver
soc: ti: k3-socinfo: Do not use syscon helper to build regmap
Link: https://lore.kernel.org/r/20250312113826.ka63nijuftgs6h52@mocker
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
-----BEGIN PGP SIGNATURE-----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=cyJK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=uZVK
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.15
1. Add support for Exynos USI v1 serial engines. Drivers already
supported newer IP blocks - USI v2 - present in Exynos850 and newer.
A bit older ARM64 designs, like Exynos8895 use older USI v1 block.
2. Add Exynos ACPM (Alive Clock and Power Manager) protocol driver
for Google GS101 SoC. ACPM protocol allows communication between the
power management firmware and other embedded processors.
3. Exynos2200: Add PMU, ChipID and SYSREG Devicetree bindings.
4. Exynos7870: Add PMU and ChipID Devicetree bindings.
5. Various cleanups.
* tag 'samsung-drivers-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
soc: samsung: include linux/array_size.h where needed
soc: samsung: exynos-chipid: add support for exynos7870
dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos7870-chipid compatible
soc: samsung: exynos-chipid: add exynos2200 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-pmu: add exynos2200 compatible
dt-bindings: soc: samsung: exynos-sysreg: add sysreg compatibles for exynos2200
firmware: Exynos ACPM: Fix spelling mistake "Faile" -> "Failed"
MAINTAINERS: add entry for the Samsung Exynos ACPM mailbox protocol
firmware: add Exynos ACPM protocol driver
dt-bindings: firmware: add google,gs101-acpm-ipc
soc: samsung: usi: implement support for USIv1 and exynos8895
soc: samsung: usi: add a routine for unconfiguring the ip
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
soc: samsung: Use syscon_regmap_lookup_by_phandle_args
Link: https://lore.kernel.org/r/20250309185601.10616-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This update includes:
- SoC driver support for Microchip SAMA7D65
- power management support for Microchip SAMA7D65
- power management fixes
- documentation fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZ8/y2AAKCRCejrg/N2X7
/Tm9AQDy++uuWZnWDALQrp7fDNZE80nkAtPkdhW14OWMB/cr7AEAoL4xDkvXkoUx
YxVMi2sPaZYmBkbOYBhFYOXIZC7SpgI=
=FliT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=qC90
-----END PGP SIGNATURE-----
Merge tag 'at91-soc-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm
Microchip AT91 SoC updates for v6.15
This update includes:
- SoC driver support for Microchip SAMA7D65
- power management support for Microchip SAMA7D65
- power management fixes
- documentation fixes
* tag 'at91-soc-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: Enable ULP0/ULP1 for SAMA7D65
ARM: at91: pm: Add Backup mode for SAMA7D65
ARM: at91: pm: add DT compatible support for sama7d65
ARM: at91: pm: fix at91_suspend_finish for ZQ calibration
dt-bindings: ARM: at91: add Calao USB boards
dt-bindings: ARM: at91: make separate entry for Olimex board
ARM: at91: Add Support in SoC driver for SAMA7D65
dt-bindings: atmel-sysreg: Add SAMA7D65 Chip ID
Link: https://lore.kernel.org/r/20250312173755.975074-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes a locking issue in the PDR implementation, which manifest itself
as transaction timeouts during the startup procedure for some
remoteprocs.
A registration race is fixed in the custom efivars implementation,
resolving reported NULL pointer dereferences.
Error handling related to tzmem allocation is corrected, to ensure that
the allocation error is propagated.
Lastly a trivial merge mistake in pmic_glink is addressed.
-----BEGIN PGP SIGNATURE-----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=QoB8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=mQFt
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.14
Fixes a locking issue in the PDR implementation, which manifest itself
as transaction timeouts during the startup procedure for some
remoteprocs.
A registration race is fixed in the custom efivars implementation,
resolving reported NULL pointer dereferences.
Error handling related to tzmem allocation is corrected, to ensure that
the allocation error is propagated.
Lastly a trivial merge mistake in pmic_glink is addressed.
* tag 'qcom-drivers-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pdr: Fix the potential deadlock
firmware: qcom: uefisecapp: fix efivars registration race
firmware: qcom: scm: Fix error code in probe()
soc: qcom: pmic_glink: Drop redundant pg assignment before taking lock
Link: https://lore.kernel.org/r/20250311022509.1232678-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add missing compatibles and pdm_domain_data for SDM630 and SDM636.
Unlike their older brother (SDM660) these two cut down SoCs lack CDSP.
Other protection domains are the same as the ones for SDM660.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250217050251.298163-1-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/all/20250313130321.568379110@linutronix.de
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114203638.1013670-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
This does not necessarily get included through asm/io.h:
drivers/soc/samsung/exynos3250-pmu.c:120:18: error: use of undeclared identifier 'ARRAY_SIZE'
120 | for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
| ^
drivers/soc/samsung/exynos5250-pmu.c:162:18: error: use of undeclared identifier 'ARRAY_SIZE'
162 | for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
| ^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250305211446.43772-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This adds entries for new and missing SoCs in the MediaTek SoCInfo
driver (MT8370AV/AZA, MT8390AV/AZA) and an extra entry for a new
revision of the MT8395AV/ZA SoC.
The MediaTek SoCInfo driver also gets its SoC attribute information
restructured: now the family, machine and soc_id fields are correctly
populated.
MT8188 gains support for the secondary Display Parallel Interface
used for HDMI, and for the Display Stream Compression component
routing through mmsys and mutex tables.
All of the MMSYS drivers get an important overhaul: it was found that,
in multiple cases, the tables contained wrong mask/value pairs, hence
those were doing either nothing or breaking routings.
The mmsys tables were converted to use a newly introduced macro that
will perform a compile time check, making sure that each table entry's
value fits in the declared register mask.
Thanks to the new macro, multiple MediaTek SoCs got multiple fixes in
their MMSYS tables, addressing issues that were severely impacting the
functionality of the display controller pipelines.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZ8mA2CgcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4Vg4A/RwP
qv6tZhnc0Y9fSygMAoSNhNcD62WBvxGI3VmmomS7AP9YmfRWBoiawv5PzT7x9myN
9dauqi3lC7AjUhZejNjvBQ==
=YKqm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Uz0f
-----END PGP SIGNATURE-----
Merge tag 'mtk-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek driver updates for v6.15
This adds entries for new and missing SoCs in the MediaTek SoCInfo
driver (MT8370AV/AZA, MT8390AV/AZA) and an extra entry for a new
revision of the MT8395AV/ZA SoC.
The MediaTek SoCInfo driver also gets its SoC attribute information
restructured: now the family, machine and soc_id fields are correctly
populated.
MT8188 gains support for the secondary Display Parallel Interface
used for HDMI, and for the Display Stream Compression component
routing through mmsys and mutex tables.
All of the MMSYS drivers get an important overhaul: it was found that,
in multiple cases, the tables contained wrong mask/value pairs, hence
those were doing either nothing or breaking routings.
The mmsys tables were converted to use a newly introduced macro that
will perform a compile time check, making sure that each table entry's
value fits in the declared register mask.
Thanks to the new macro, multiple MediaTek SoCs got multiple fixes in
their MMSYS tables, addressing issues that were severely impacting the
functionality of the display controller pipelines.
* tag 'mtk-soc-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
soc: mediatek: mt8167-mmsys: Fix missing regval in all entries
soc: mediatek: mt8188-mmsys: Migrate to MMSYS_ROUTE() macro
soc: mediatek: mtk-mmsys: Add compile time check for mmsys routes
soc: mediatek: mtk-mmsys: Fix MT8188 VDO1 DPI1 output selection
soc: mediatek: mtk-mutex: Add DPI1 SOF/EOF to MT8188 mutex tables
soc: mediatek: mtk-socinfo: Avoid using machine attribute in SoC detection log
soc: mediatek: mtk-socinfo: Add entry for MT8390AV/AZA Genio 700
soc: mediatek: mtk-socinfo: Add entry for MT8370AV/AZA Genio 510
soc: mediatek: mtk-socinfo: Restructure SoC attribute information
Link: https://lore.kernel.org/r/20250306113540.148342-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Additional logging for errors
- A few minor improvements and bugfixes required for drivers that are
yet to be upstreamed
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCZ8RBIAAKCRBEEX0kKnUe
6emXAQCKv1KH1fh1U3mUmqKFj6GNd3Ezq5uQqSwQi5gU+AgiHwD6A+vgMJ322tZ2
aHxf2QfdO+RRiJulac1kcvhkBDnp2AI=
=05ee
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfJygcACgkQYKtH/8kJ
UicY+w/+M+B5pdTN7GbbdXolV1/oZ9p+1MsQKa1aQRsUzZSu/6ALtQ36O1fJLe98
AsxP07x+PTCmROGFn9XqeLKvJ9e1k6w9kCj60aNo6Rt7FtR9VjGOS5muDws2zib0
Mu3MssXJY22M9Saf3X3lM0n1aJ0kOXd1owuOnGOx3ecZlVuUPg1JI/90R751zmxJ
Qg3bMiEpRJfIdKCUgMmM1Y50XHv6QhF/RDjA/f3xl8uEW7BurRgGKrkCCoKkjNpZ
znNgW6z4TRRS/zYL+0E3bJepk4rPZLLHndioCzDrUimxuf/TYAstcDTj+RepxJcc
JymVi/noTLxCVDwrqvSSD4roC78sT5clbclbZo4huPhWCkL0CDG0WLQC/EfcRYF0
SatsFvLVuaKTFQ0U4NxdfpSZz0oqNyfDSGbjMdSESeIaCqRvc5UjHUL5O2ZHiI8J
Th9c+pMp70ipNPdjdB7P63gGK4LDm8DkPfuu7BvXF4c1f80O5uiU1hJIPnl5eDYM
DnJG9m3NhDz4KtzLFcTUvhpDoLCNxMrDhUlril9M9zl2E/zxqljdUOTGWWFnBtKk
0n1PWPXUstTFgLQ9AfHNE2WyJmxc0+WckKkxtK+JU29YswIXXRsn1N7JM+9X6BXG
rojto59eevcsYbnpXBIpSFeOs2NeSZMLu1kFidqQSRebbCburNk=
=QUAr
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-rtkit-6.15' of https://github.com/AsahiLinux/linux into soc/drivers
Apple SoC RTKit IPC library updates for 6.15:
- Additional logging for errors
- A few minor improvements and bugfixes required for drivers that are
yet to be upstreamed
* tag 'asahi-soc-rtkit-6.15' of https://github.com/AsahiLinux/linux:
soc: apple: rtkit: Cut syslog messages after the first '\0'
soc: apple: rtkit: Use high prio work queue
soc: apple: rtkit: Implement OSLog buffers properly
soc: apple: rtkit: Add and use PWR_STATE_INIT instead of _ON
soc: apple: rtkit: Fix use-after-free in apple_rtkit_crashlog_rx()
soc: apple: rtkit: Pass the crashlog to the crashed() callback
soc: apple: rtkit: Check & log more failures
Link: https://lore.kernel.org/r/20250302113842.58092-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add a driver for the System Controller on RZ/G3S, RZ/G3E, and
RZ/V2H.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ7ilRQAKCRCKwlD9ZEnx
cLmpAP0ZQtRGAQkXR7ne3GpIXEuJ3petf+SnNlzZEQIpoeTyRgEAm7NcDY6B/5hI
HFlAQnHnpHOirRiCnmBobrRJDlZIDQU=
=P4me
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aT8E
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.15
- Add a driver for the System Controller on RZ/G3S, RZ/G3E, and
RZ/V2H.
* tag 'renesas-drivers-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: r9a09g057-sys: Add a callback to print SoC-specific extra features
soc: renesas: rz-sysc: Move RZ/V2H SoC detection to the SYS driver
soc: renesas: rz-sysc: Add support for RZ/G3E family
soc: renesas: rz-sysc: Move RZ/G3S SoC detection to the SYSC driver
soc: renesas: Add SYSC driver for Renesas RZ family
Link: https://lore.kernel.org/r/cover.1740156741.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmfAN/4UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4sswf+KA9QBYQomjw4vzrjtSDLbGFY2xhH
lovwDFXFI4U1uAMccbo/uEGiGXNfgT9CuieelgNKasdJzOoH0UmZmJG70ohIV69A
zy2IzsG1JyqENf9j7YYm5aQYvuiwgKP04c8vMRsDBLCxB9FPN7MxA8M8gAAGXJVx
JjsxN8jl4CT4r6BeUMNhz7vc3XsYmhqNYGxYDJW9Q2zAb17R/IvZTdaz8UPAmCak
7PvuU1LeRHDP4G//lcocRRgymW/6KSkPULRkIMosLv+hfFl0jZ5nL6UumrhzAB3i
CeMF6woWn44MfaqJ9fFfjZM2ToBQo0ALJd5ZtjowBapvTZl9GIEcrZ7+Pw==
=N+Yn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmfJwCEACgkQYKtH/8kJ
Uif2Og//UMvMtwTWB5xUMks1uHNoM/pajJsVlqfeMPUr7kvpjOjZ8vmAa1mqIBp2
u3KLDq8P336b/m/ct6vt0tX4itfW9YtWasz1bu4u0qs/s/RWjgysJxIvzINfLxpK
vm45pI48LPedoouxa365ATXW8uDQXMdQQK4TECpH3pfNi8tISkQ/8UAV8TiAJAvb
VKwfqcnETMqSXisG5rHNZi7jldzoHn1PEpMtIMkamXrjIZybfWRkSbOcR5S9jLDm
I58OWiIw0qCxTe4wg+qSP8mw8V60RXIf36lJbIjkTinC7o3hEFjkJ9aZk/Rvx/rw
EonGWSezBcaoNUaaYEVqgw0Z+Frk8WC39gyUfBhNhQMaz64OUmqSwah4xn151NRA
aHJMuw7j16BIDYrc4BZzicntOBoStzjkzg3CSj4Q1QobDVYYkvd0wCX5yy0UtYfa
Z3ItaW9VB/VwwIhwQM9z9F1vvEcrdWuKWhdlo5/dsuH6Oll0qLFAi2ye5nHNAyrG
3Rg7g61Hnb20anMNM6/U64tLfwiaO/i+joS9dCFMv6oCLyJhSOJdJJ/FKKHDJVCu
eubtQJv26JUN665H0QWnB9ZmAdIjpOAj8yeC41kapOrBsdYQP5WmSA7ChwG4T5B9
NwuwAuRrk8ItX4VtniWcI5+G4CFdzzCyrfOapflpyfkKqLDm8fc=
=t1ga
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Mediatek Genio 1200 EVK P1V2 board has a different socinfo match
for MT8395 SoC (commercial name Genio 1200), so add it the driver.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250220-mtk-socinfo-genio-1200-evk-v1-1-a683ad028bc5@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Now that all of the mmsys routing tables have been fixed,
migrate all of them to use the MMSYS_ROUTE() macro: this
will make sure that future additions to any of the tables
for the currently supported SoCs are compile-time sanity
checked, greatly reducing room for (way too common) mistakes.
Link: https://lore.kernel.org/r/20250212100012.33001-8-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The mmsys driver reads the routing table and writes to the
hardware `val & mask`, but multiple entries in the mmsys
routing table for the MT8365 SoC are setting a 0x0 mask:
this effectively writes .. nothing .. to the hardware.
That would never work, and if the display controller was
actually working with the mmsys doing no routing at all,
that was only because the bootloader was correctly setting
the display controller routing registers before booting the
kernel, and the mmsys was never reset.
Make this table to actually set the routing by adding the
correct register masks to it.
While at it, also change MOUT val definitions to BIT(x), as
the MOUT registers are effectively checking for each bit to
enable output to the corresponding HW.
Please note that, for this SoC, only the MOUT registers are
checking bits (as those can enable multiple outputs), while
the others are purely reading a number to select an input.
Fixes: bc3fc5c051 ("soc: mediatek: mmsys: add MT8365 support")
Link: https://lore.kernel.org/r/20250212100012.33001-7-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The mmsys routing table for this SoC was effectively missing
initialization of the val variable of struct mtk_mmsys_routes:
this means that `val` was incorrectly initialized to zero,
hence the registers were wrongly initialized.
Add the required regval to all of the entries of the routing
table for this SoC to fix display controller functionality.
Fixes: 060f7875bd ("soc: mediatek: mmsys: Add support for MT8167 SoC")
Link: https://lore.kernel.org/r/20250212100012.33001-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Change the initialization data in the arrays of structure
mtk_mmsys_routes to make use of the MMSYS_ROUTE() macro:
this will make sure that each array entry's SEL value fits
in its corresponding register mask with a compile time check.
Link: https://lore.kernel.org/r/20250212100012.33001-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Every MediaTek SoC with multimedia capabilities has an array of
structure mtk_mmsys_routes that defines a multimedia connection
between hardware components.
This connection is activated by writing a (masked) value in each
specific register, and the association between from->to path and
value to write is expressed as an entry in that array.
Failing to set the right path does not give any meaningful error
and makes things to simply not work as the data will either not
be retrieved from the right input port, or will be written to
the wrong output port (or both): since a misconfiguration may
effectively still be a possibly correct configuration at the HW
level, this may be only giving side effects in terms of simply
getting no functionality but, again, no errors.
In order to reduce room for mistakes in declarations of the
mmsys routes, add a macro that compile-time checks that the
provided value does at least fit in the register mask.
Link: https://lore.kernel.org/r/20250212100012.33001-4-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The VDO1_MERGE4 hardware (merge5 software component) should be
set to enable output to DPI1_SEL by setting BIT(2) but, despite
the intention being exactly that, this won't work because the
declared register mask is wrong as it is set as GENMASK(1, 0).
Register MERGE4_MOUT_EN in VDO1 has four used bits [3, 0] so
fix the mask to reflect that.
That, in turn, allows the mmsys driver to actually set BIT(2)
in this register, fixing the MERGE4 output to DPI1 selection.
Fixes: c0349314d5 ("soc: mediatek: Support MT8188 VDOSYS1 in mtk-mmsys")
Link: https://lore.kernel.org/r/20250212100012.33001-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8188 uses DPI1 to output to the HDMI controller: add the
Start of Frame and End of Frame configuration for the DPI1
IP to the tables to unblock generation and sending of these
signals to the GCE.
Link: https://lore.kernel.org/r/20250212100012.33001-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The recently introduced SoC attribute info rework avoided modifying the
machine attribut but still used it in the log message on successful SoC
matching. It leads to print a confusing log about a board-related info
(read from devicetree) and not about the matched SoC:
```
mtk-socinfo mtk-socinfo.0.auto: MediaTek MediaTek Genio-510 EVK SoC
detected
```
So, fix the dev_info format to display SoC family and name attribute
instead.
```
mtk-socinfo mtk-socinfo.0.auto: MediaTek Genio 510 (MT8370) SoC detected.
```
Fixes: da77c2d3d0 ("soc: mediatek: mtk-socinfo: Restructure SoC attribute information")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250221-mtk-socinfo-fix-print-v1-1-20500f30ef66@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Certain messages from DCP contain NUL bytes in the random data after the
NUL terminated syslog message. Since the syslog message ends with '\n'
this results in a dev_info() message terminated with two newlines and an
empty printed line in the kernel log.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-4-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
rtkit messages as communication with the DCP firmware for framebuffer
swaps or input events are time critical so use WQ_HIGHPRI to prevent
user space CPU load to increase latency.
With kwin_wayland 6's explicit sync mode user space load was able to
delay the IOMFB rtkit communication enough to miss vsync for surface
swaps. Minimal test scenario is constantly resizing a glxgears
Xwayland window.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-3-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Apparently nobody can figure out where the old logic came from, but it
seems like it has never been actually used on any supported firmware to
this day. OSLog buffers were apparently never requested.
But starting with 13.3, we actually need this implemented properly for
MTP (and later AOP) to work, so let's actually do that.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-2-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
This state is needed to wake the dcp IOP after m1n1 shut it down
and works for all other co-processors as well.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-1-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.
This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250123181726.597144-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Unregister the cpufreq device and soc device when resource unwinding,
otherwise there will be warning when do removing test:
sysfs: cannot create duplicate filename '/devices/platform/imx-cpufreq-dt'
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc1-next-20241204
Hardware name: NXP i.MX8MPlus EVK board (DT)
Fixes: 9cc832d377 ("soc: imx8m: Probe the SoC driver as platform driver")
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some RZ/V2H SoC variants feature a Mali-G31 (GPU) and/or a Mali-C55
(ISP) IP(s). Detect and inform about their presence during SoC
identification. Also detect PLL frequency and warn in case of mismatch.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Link: https://lore.kernel.org/20250128031342.52675-6-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As per the other SoC variant of the same family, the system controller
provides SoC ID in its own registers.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-5-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add SoC detection support for the RZ/G3E SoC. Also add support for
detecting the number of cores and the ETHOS-U55 NPU, and also detect PLL
mismatch for SW settings other than 1.7GHz.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Now that we have SoC detection in the RZ SYSC driver, move the RZ/G3S
SoC detection to it. The SYSC provides SoC ID in its own registers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Link: https://lore.kernel.org/20250128031342.52675-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/G3S system controller (SYSC) has various registers that control
different functionalities. One of the exposed register offers
information about the SoC identification.
Add a driver that identifies the SoC. Later the driver will be extended
with other functionalities.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This code calls kfree(bfr); and then passes "bfr" to rtk->ops->crashed()
which is a use after free. The ->crashed function pointer is implemented
by apple_nvme_rtkit_crashed() and it doesn't use the "bfr" pointer so
this doesn't cause a problem. But it still looks sketchy as can be.
Fix this by moving kfree() after the last usage of bfr.
Fixes: bf8b4e4977 ("soc: apple: rtkit: Pass the crashlog to the crashed() callback")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Link: https://lore.kernel.org/r/20250212085853.1357906-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Client drivers might want a copy of the crashlog to stash into a
devcoredump blob. Since device memory management can be very variable,
the actual devcoredump implementation is left to client drivers. Pass
the raw crashlog buffer to the client callback so it can use it if
desired.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250202-rtkit-crashdump-v1-1-9d38615b4e12@asahilina.net
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add an entry for the MT8390 SoC with commercial name Genio 700.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250113-mtk-socinfo_genio-510-700-v1-2-cf5112b325b7@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add an entry for the MT8370 SoC with commercial name Genio 510.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250113-mtk-socinfo_genio-510-700-v1-1-cf5112b325b7@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
So far, the MediaTek socinfo driver populates the SoC information as
follows:
- family: "MediaTek"
- machine: "<marketing_name> (<soc_name>)"
e.g., "Kompanio 1380 (MT8195)"
- soc_id: <null>
This approach has some drawbacks:
1. "soc_id" can be used for showing the SoC name (e.g. "MT8195"), while
it's currently unused.
2. The newer socinfo API automatically populates the "machine"
attribute with the model name from board DTS if unspecified, which
we may want to preserve if possible.
3. "machine" combines the marketing name and SoC name, making it
trickier to parse. Ideally, the marketing name and SoC name should
be in separate attributes so userspace to utilize them as needed.
4. There's no guarantee that the marketing name will be announced along
with the SoC name. If either is undetermined, the current design
will result in a malformed "machine" output. This is observed on
some newer MediaTek platforms, where the marketing name is still
undetermined but the SoC information needs to be settled for device
registration and validation before launch.
To address these points, this commit proposes a new theme to display the
SoC information:
- family: "MediaTek <marketing_name>"
e.g., "MediaTek Kompanio 1380"
- machine: "<dt_model_name>" (auto-populated)
e.g., "Acer Tomato (rev1) board"
- soc_id: "<soc_name>"
e.g., "MT8195"
Moreover, if the marketing name is not provided, the driver displays
"MediaTek" in the "family" attribute instead, consistent with the
previous behavior.
Restructure the way driver populates the SoC information as described
above.
Note that Mediatek-based Chromebooks are the primary consumers of this
socinfo driver, and Google has prepared corresponding userspace changes
to comply with this update, so the impact to userspace is controlled.
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20241219113411.3999355-1-fshao@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
soc_dev_attr->revision could be NULL, thus,
a pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250212213518.69432-1-chenyuan0y@gmail.com
Fixes: 3253b7b7cd ("soc: samsung: Add exynos chipid driver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
'struct qmi_elem_info servreg_location_entry_ei' is used only internally
in qcom_pdr_msg.c, so drop the extern declaration to make headers
smaller and code more obvious about intention.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250121102817.68577-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There's no consumer calling it left, make the method static.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250117-qcom-ice-fix-dev-leak-v2-4-1ffa5b6884cb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Callers of of_qcom_ice_get() leak the device reference taken by
of_find_device_by_node(). Introduce devm variant for of_qcom_ice_get().
Existing consumers need the ICE instance for the entire life of their
device, thus exporting qcom_ice_put() is not required.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250117-qcom-ice-fix-dev-leak-v2-1-1ffa5b6884cb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When some client process A call pdr_add_lookup() to add the look up for
the service and does schedule locator work, later a process B got a new
server packet indicating locator is up and call pdr_locator_new_server()
which eventually sets pdr->locator_init_complete to true which process A
sees and takes list lock and queries domain list but it will timeout due
to deadlock as the response will queued to the same qmi->wq and it is
ordered workqueue and process B is not able to complete new server
request work due to deadlock on list lock.
Fix it by removing the unnecessary list iteration as the list iteration
is already being done inside locator work, so avoid it here and just
call schedule_work() here.
Process A Process B
process_scheduled_works()
pdr_add_lookup() qmi_data_ready_work()
process_scheduled_works() pdr_locator_new_server()
pdr->locator_init_complete=true;
pdr_locator_work()
mutex_lock(&pdr->list_lock);
pdr_locate_service() mutex_lock(&pdr->list_lock);
pdr_get_domain_list()
pr_err("PDR: %s get domain list
txn wait failed: %d\n",
req->service_name,
ret);
Timeout error log due to deadlock:
"
PDR: tms/servreg get domain list txn wait failed: -110
PDR: service lookup for msm/adsp/sensor_pd:tms/servreg failed: -110
"
Thanks to Bjorn and Johan for letting me know that this commit also fixes
an audio regression when using the in-kernel pd-mapper as that makes it
easier to hit this race. [1]
Link: https://lore.kernel.org/lkml/Zqet8iInnDhnxkT9@hovoldconsulting.com/ # [1]
Fixes: fbe639b44a ("soc: qcom: Introduce Protection Domain Restart helpers")
CC: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Co-developed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212163720.1577876-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
USIv1 IP-core is found on some ARM64 Exynos SoCs (like Exynos8895) and
provides selectable serial protocols (one of: HSI2C0, HSI2C1, HSI2C0_1,
SPI, UART, UART_HSI2C1).
USIv1, unlike USIv2, doesn't have any known register map. Underlying
protocols that it implements have no offset, like with Exynos850.
Desired protocol can be chosen via SW_CONF register from System
Register block of the same domain as USI.
In order to select a particular protocol, the protocol has to be
selected via the System Register. Unlike USIv2, there's no need for
any setup before the given protocol becomes accessible apart from
enabling the APB clock and the protocol operating clock.
Modify the existing driver in order to allow USIv1 instances in
Exynos8895 to probe and set their protocol. While we're at it,
make use of the new mode constants in place of the old ones.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250204172803.3425496-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add a devm_add_action_or_reset() routine for unconfiguring the USI IP
block whenever the device gets removed.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250204172803.3425496-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114203646.1013708-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit e9f826b045 ("soc: qcom: pmic_glink: simplify locking with
guard()") was on top of a fix [1] which was moving the 'pg =
__pmic_glink' assignment into the critical section. Unfortunately the
actual fix was not applied and instead rebased version of the next patch
got in. The resulting code is in general correct, but now there is a
duplicated assignment 'pg = __pmic_glink'.
[1] https://lore.kernel.org/all/20240822164815.230167-1-krzysztof.kozlowski@linaro.org/
Fixes: e9f826b045 ("soc: qcom: pmic_glink: simplify locking with guard()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250111172326.101779-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
Link: https://lore.kernel.org/r/20250111185402.183793-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=ktuX
-----END PGP SIGNATURE-----
Merge tag 'media/v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Sensor driver fixes
- remove dead TI wl128x FM radio driver
- Add support for the imx462 sensor at the IMX290 binding
- V4L2 pixel data transmitter and receiver documentation improvements
- Add support for MIPI Discovery and Configuration for C-PHY line
orders
- imx8-isi fixes and improvements
- stm32: dcmipp: add core support for the stm32mp25
- qcom: camss: Add sc7280 support
- Various fixes and enhancements
* tag 'media/v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (152 commits)
media: nuvoton: Fix an error check in npcm_video_ece_init()
media: dvb-usb-v2: af9035: fix ISO C90 compilation error on af9035_i2c_master_xfer
media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
media: fix secfeed undefined when filter alloc fail
media: dt-bindings: trivial white-space and example cleanup
MAINTAINERS: repair file entry in MEDIA DRIVERS FOR STM32 - CSI
media: solo6x10: Use const 'struct bin_attribute' callback
media: saa7164: Remove unused values
staging: media: imx: fix OF node leak in imx_media_add_of_subdevs()
media: platform: exynos4-is: Remove unused __is_get_frame_size
media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread
media: mmp: Bring back registration of the device
media: cec: include linux/debugfs.h and linux/seq_file.h where needed
Revert "media: qcom: camss: Restructure camss_link_entities"
media: venus: Remove unused hfi_core_ping()
media: dt-bindings: qcom-venus: Deprecate video-decoder and video-encoder where applicable
media: venus: Populate video encoder/decoder nodename entries
media: venus: Add support for static video encoder/decoder declarations
media: venus: match instance creation and destruction order
media: venus: destroy hfi session after m2m_ctx release
...
These are changes to SoC specific drivers and DT bindings that don't have
a separate subsystem tree, or that get grouped here for simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding support
for additional SoCs in the exssting drivers, and support for wrapped
encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx and
renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the code
and adding a few interfaces to other drivers.
-----BEGIN PGP SIGNATURE-----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=oeUS
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are changes to SoC specific drivers and DT bindings that don't
have a separate subsystem tree, or that get grouped here for
simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding
support for additional SoCs in the exssting drivers, and support
for wrapped encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx
and renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the
code and adding a few interfaces to other drivers"
* tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (58 commits)
drivers/soc/litex: Use devm_register_restart_handler()
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove
soc: mediatek: mtk-devapc: Fix leaking IO map on error paths
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
...
The updates here add code for the Microchip SAMA7D65 SoC,
as well as minor bugfixes for OMAP.
-----BEGIN PGP SIGNATURE-----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=Y/8I
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC arm platform code updates from Arnd Bergmann:
"The updates here add code for the Microchip SAMA7D65 SoC, as well as
minor bugfixes for OMAP"
* tag 'soc-arm-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap1: Fix up the Retu IRQ on Nokia 770
ARM: omap2plus_defconfig: enable charger of TWL603X
ARM: at91: add new SoC sama7d65
ARM: at91: pm: change BU Power Switch to automatic mode
soc: atmel: fix device_node release in atmel_soc_device_init()
ARM: OMAP2+: Fix a typo
drivers, per usual, and then a handful of drivers for other SoCs. Then the
usual pile of cleanups is fairly small data fixes or converting DT bindings to
YAML so they can be validated. No changes to the core framework besides an OF
node refcount bump that never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750 global,
tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh and MSM8937 and
MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver
-----BEGIN PGP SIGNATURE-----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=wK9g
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.
No changes to the core framework besides an OF node refcount bump that
never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...
LiteX updates for next
Remaining LiteX updates from 2024, reviewed and
successfully tested against v6.13-rc1.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
* tag 'litex-6.13-rc1' of https://github.com/litex-hub/linux:
drivers/soc/litex: Use devm_register_restart_handler()
Link: https://lore.kernel.org/r/Z41PgCffqPUTyxkE@errol.ini.cmu.edu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use device life-cycle managed register function to simplify probe error
path and eliminate need for explicit remove function.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Gabriel Somlo <gsomlo@gmail.com>
Link: https://lore.kernel.org/all/20240123164443.394642-3-afd@ti.com
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
The Qualcomm SCM drivers gains a number of fixes and improvements
related to race conditions during initialization. QSEECOM and the EFI
variable service therein is enabled for a few 8cx Gen 3 and X Elite
boards.
LLCC driver gains configuration for IPQ5424 and WRCACHE is enabled on X
Elite.
The BCM_TCS_CMD() macro is corrected and is cleaned up.
Support for SM7225 and X 1 Plus are added to the pd-mapper.
pmic_glink and the associated altmode driver are simplied using guards.
socinfo is added for QCS9075 and serial number readout on MSM8916
devices is corrected.
-----BEGIN PGP SIGNATURE-----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=ra/f
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cVEn
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.14
The Qualcomm SCM drivers gains a number of fixes and improvements
related to race conditions during initialization. QSEECOM and the EFI
variable service therein is enabled for a few 8cx Gen 3 and X Elite
boards.
LLCC driver gains configuration for IPQ5424 and WRCACHE is enabled on X
Elite.
The BCM_TCS_CMD() macro is corrected and is cleaned up.
Support for SM7225 and X 1 Plus are added to the pd-mapper.
pmic_glink and the associated altmode driver are simplied using guards.
socinfo is added for QCS9075 and serial number readout on MSM8916
devices is corrected.
* tag 'qcom-drivers-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits)
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
soc: qcom: socinfo: add QCS9075 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS9075
soc: qcom: socinfo: Avoid out of bounds read of serial number
firmware: qcom: scm: Allow QSEECOM on Huawei Matebook E Go (sc8280xp)
firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
firmware: qcom: scm: Allow QSEECOM for HP Omnibook X14
soc: qcom: rmtfs: constify rmtfs_class
soc: qcom: rmtfs: allow building the module with COMPILE_TEST=y
soc: qcom: pmic_glink_altmode: simplify locking with guard()
soc: qcom: Rework BCM_TCS_CMD macro
...
Link: https://lore.kernel.org/r/20250111172901.391774-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains debugfs error handling cleanup, a typofix and an update to
the FUSE block's keepout list to properly allow reading these registers.
-----BEGIN PGP SIGNATURE-----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=LsEi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+AAx
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.14-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Cleanups for v6.14-rc1
This contains debugfs error handling cleanup, a typofix and an update to
the FUSE block's keepout list to properly allow reading these registers.
* tag 'tegra-for-6.14-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
Link: https://lore.kernel.org/r/20250110185355.4143505-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Kernel coding style expects all drivers to ignore debugfs errors.
Partially because it is purely for debugging, not for important user
interfaces. Simplify the code by dropping unnecessary probe failuring
and error message on debugfs failures, which also fixes incorrect usage
IS_ERR_OR_NULL() and Smatch warning:
drivers/soc/tegra/cbb/tegra-cbb.c:80 tegra_cbb_err_debugfs_init() warn: passing zero to 'PTR_ERR'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250104141958.115911-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
The 'broadcast' register space is present only in chipsets that
have multiple instances of LLCC IP. Since IPQ5424 has only one
instance, both the LLCC and LLCC_BROADCAST points to the same
register space.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241121051935.1055222-3-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Error paths of mtk_devapc_probe() should unmap the memory. Reported by
Smatch:
drivers/soc/mediatek/mtk-devapc.c:292 mtk_devapc_probe() warn: 'ctx->infra_base' from of_iomap() not released on lines: 277,281,286.
Fixes: 0890beb226 ("soc: mediatek: add mt6779 devapc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250104142012.115974-1-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account.
Cc: stable@vger.kernel.org
Fixes: efb448d0a3 ("soc: qcom: Add socinfo driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241230-qcom-socinfo-serialno-oob-v1-1-9b7a890da3da@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If tensor_set_bits_atomic() is called with a mask of 0 the function will
just iterate over its bit, not perform any updates and return stack
value of 'ret'.
Also reported by smatch:
drivers/soc/samsung/exynos-pmu.c:129 tensor_set_bits_atomic() error: uninitialized symbol 'ret'.
Fixes: 0b7c607502 ("soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250104135605.109209-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use the proper API instead of open coding it.
However it looks like kthreads here could be replaced by the use of a
per-cpu workqueue instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
The rmtfs class object is never modified and can be made constant.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241202094903.18388-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make it possible to build the module when COMPILE_TEST is enabled for
better build coverage.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241202094903.18388-1-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If of_parse_phandle_with_args() succeeds, the OF node reference should
be dropped, regardless of number of phandle arguments.
Cc: stable@vger.kernel.org
Fixes: 9460ae2ff3 ("soc: qcom: Introduce common SMEM state machine code")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240822164853.231087-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Last Level Cache is split into many slices, each one of which can
be toggled on or off.
Only certain slices are recommended to be turned on unconditionally,
in order to reach optimal performance/latency/power levels.
Enable WRCACHE on X1 at boot, in accordance with internal
recommendations.
No significant performance difference is expected.
Fixes: b3cf69a435 ("soc: qcom: llcc: Add configuration data for X1E80100")
Cc: stable@vger.kernel.org
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241219-topic-llcc_x1e_wrcache-v3-1-b9848d9c3d63@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
X1P42100 is a cousin of X1E80100, and hence can make use of the
latter's configuration. Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_soc-v1-3-55347831d73c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The helper devm_clk_bulk_get_all_enable() missed to return the number of
clocks stored in the clk_bulk_data table referenced by the clks
argument and, therefore, will be dropped.
Use the newly introduced devm_clk_bulk_get_all_enabled() variant
instead, which is consistent with devm_clk_bulk_get_all() in terms of
the returned value:
> 0 if one or more clocks have been stored
= 0 if there are no clocks
< 0 if an error occurred
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20241217-clk_bulk_ena_fix-v5-1-aafbbb245155@collabora.com
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to have fine-grained control, use cmdq_pkt_eoc() and
cmdq_pkt_jump_rel() to replace cmdq_pkt_finalize().
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Simplify error handling over locks with guard(). In few places this
elimiates error gotos and local variables. Switch to guard() everywhere
(except when jumps would go over scoped guard) for consistency, even if
it does not bring benefit in such places.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240822164815.230167-2-krzysztof.kozlowski@linaro.org
[bjorn: Rebased ontop of v6.13-rc1]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
i.MX9 SoCs have SoC ID, SoC revision number and chip unique identifier
which are provided by the corresponding ARM trusted firmware API. This
patch intends to use SMC call to obtain these information and then
register i.MX9 SoC as a device.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A device_node acquired via of_find_node_by_path() requires explicit
calls to of_node_put() when it is no longer needed to avoid leaking the
resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'np' by means of the __free()
macro, which automatically calls of_node_put() when the variable goes
out of scope.
Fixes: 960ddf70cc ("drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241031-soc-atmel-soc-cleanup-v2-1-73f2d235fd98@gmail.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending the
set of supported features for additional SoCs in the QSEECOM, LLCC
and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip
sparx5 and amlogic reset drivers to support additional chips,
plus a few minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus,
and drivers/memory, including changing back the .remove_new callback
to .remove, as well as a few other updates for freescale (powerpc)
soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory
controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers
-----BEGIN PGP SIGNATURE-----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=xeCE
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device driver
and platform code has already made it in. This is likely the last ARMv5
(!) platform to ever get added, updating the 20+ year old at91/sam9
platform wtih DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number of
A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older
Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related
to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet
chips, still using the older ARMv8.0 cores from RK3328/RK3399 but
with a newer process and other improvements from the RK35xx (otherwise
ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just
lower-cost versions of their normal counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly added
chips above, notably all the Apple phones and tablets. The other new
machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8
SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109,
RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100,
TI AM625 and Starfive JH7110.
As usual there are also many newlyad added features in existing boards
as well as cleanups and minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=Ha1w
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
- Tree wide:
* Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
- Core code:
* Prevent freeing an interrupt in the devres code which is not managed
by devres in the first place.
* Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
* Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which checks
whether ksoftirqd should be woken up. The latter is a pointless
exercise as both soft interrupts are raised in the context of the
timer interrupt and therefore never wake up ksoftirqd.
* Delegate timer/hrtimer soft interrupt processing to a dedicated thread
on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
- Drivers:
* New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
* Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU cluster
has its own GIC (Generic Interrupt Controller). This requires to
access the GIC of a remote cluster through a redirect register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC details.
* Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
* Small cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7ggcTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoaf7D/9G6FgJXx/60zqnpnOr9Yx0hxjaI47x
PFyCd3P05qyVMBYXfI99vrSKuVdMZXJ/fH5L83y+sOaTASyLTzg37igZycIDJzLI
FnHh/m/+UA8k2aIC5VUiNAjne2RLaTZiRN15uEHFVjByC5Y+YTlCNUE4BBhg5RfQ
hKmskeffWdtui3ou13CSNvbFn+pmqi4g6n1ysUuLhiwM2E5b1rZMprcCOnun/cGP
IdUQsODNWTTv9eqPJez985M6A1x2SCGNv7Z73h58B9N0pBRPEC1xnhUnCJ1sA0cJ
pnfde2C1lztEjYbwDngy0wgq0P6LINjQ5Ma2YY2F2hTMsXGJxGPDZm24/u5uR46x
N/gsOQMXqw6f5yvbiS7Asx9WzR6ry8rJl70QRgTyozz7xxJTaiNm2HqVFe2wc+et
Q/BzaKdhmUJj1GMZmqD2rrgwYeDcb4wWYNtwjM4PVHHxYlJVq0mEF1kLLS8YDyjf
HuGPVqtSkt3E0+Br3FKcv5ltUQP8clXbudc6L1u98YBfNK12hW8L+c3YSvIiFoYM
ZOAeANPM7VtQbP2Jg2q81Dd3CShImt5jqL2um+l8g7+mUE7l9gyuO/w/a5dQ57+b
kx7mHHIW2zCeHrkZZbRUYzI2BJfMCCOVN4Ax5OZxTLnLsL9VEehy8NM8QYT4TS8R
XmTOYW3U9XR3gw==
=JqxC
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
- Fix a missing of_node_put() in RCPM
- Fix a missing error code on failure in CPM1 QMC
- Switch to using for_each_available_child_of_node_scoped() in CPM1 TSA
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQQQ/+b4s5DeF6zCYyNoqS/rAbjdeAUCZzYBFRwcY2hyaXN0b3Bo
ZS5sZXJveUBjc2dyb3VwLmV1AAoJEGipL+sBuN14vbcBALObPpE0CcTKWee4PMKu
iEMnznKztaety2HsU8EVmYVPAP9nYGA/3EkGUMiEwh2+Kc/0/pIIIXRveCt2xWq4
fBOACQ==
=WD3l
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6Rkj
-----END PGP SIGNATURE-----
Merge tag 'soc_fsl-6.13-1' of https://github.com/chleroy/linux into soc/drivers
FSL SOC changes for 6.13:
- Fix a missing of_node_put() in RCPM
- Fix a missing error code on failure in CPM1 QMC
- Switch to using for_each_available_child_of_node_scoped() in CPM1 TSA
* tag 'soc_fsl-6.13-1' of https://github.com/chleroy/linux:
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
Link: https://lore.kernel.org/r/c3c4961b-fe2a-4fcc-a7a1-f8b5352e09a2@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A kernel test robot detected a missing error code:
qmc.c:1942 qmc_probe() warn: missing error code 'ret'
Indeed, the error returned by platform_get_irq() is checked and the
operation is aborted in case of failure but the ret error code is
not set in that case.
Set the ret error code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202411051350.KNy6ZIWA-lkp@intel.com/
Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241105145623.401528-1-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
of_find_compatible_node() requires a call to of_node_put() when the
pointer to the node is not required anymore to decrement its refcount
and avoid leaking memory.
Add the missing call to of_node_put() after the node has been used.
Cc: stable@vger.kernel.org
Fixes: e95f287dee ("soc: fsl: handle RCPM errata A-008646 on SoC LS1021A")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241013-rcpm-of_node_put-v1-1-9a8e55a01eae@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The non-scoped variant of this macro turns error-prone as soon as error
paths are included, because explicit calls to of_node_put() are required
to avoid leaking memory.
Using its scoped counterpart simplifies the code by removing the need of
explicit calls to of_node_put(), as they are automatically triggered as
soon as the child node goes out of scope. Moreover, it is more robust as
it accounts for new error paths without having to worry about
decrementing the object's refcount.
Note that the device_node is declared within the macro, and its explicit
declaration can be dropped as well if it is not used anywhere else.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241002-tsa-scoped-v1-1-ba6a6d657f82@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.
Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.
Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.
Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.
-----BEGIN PGP SIGNATURE-----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=Wqwn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yuqG
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.13
Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.
Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.
Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.
Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.
* tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
soc: qcom: llcc: Add configuration data for QCS615
dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC
soc: qcom: llcc: add support for SAR2130P and SAR1130P
soc: qcom: llcc: use deciman integers for bit shift values
dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
Link: https://lore.kernel.org/r/20241113032425.356306-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- knav_qmss_queue: Cleanups around request_irq params and redundant code.
- ti_sci: Power management ops in preperation for suspend/resume capability.
Also includes dependency patch to export dev_pm_qos_read_value
(acked by Rafael).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmcrXIEACgkQ3bWEnRc2
JJ0ZRhAAiJKWaG8TS3E9Bpy1HtgMvtn5mXC+72EFCqFWn7oUmuAmL5ivO7XDKbcO
scAtdzkupgazD6h4lLwu7VQYEGRt/1+mTaQ1MfgnHlQiShLeJQ8tbkmv49MXGiH0
OKNMlKYfxVvTmyQYVYStM1WoH54ab3vn6iMZT1uiDAAkHniGE+uBgX92+Y+AjV9p
26rBct9aOHzfoEx339/mr3yElf6y74kuie2rpskJfCqT8dRqIw1glu6mFI8T2Bwp
BFjjSny7rAg37Q9gzhhg623TznXhNxFEpDKE/thsgc9LU6OiMSTuONjXvCuPhANe
OvAt8FTg691Op5Dkj+3e3AUp7cQ46BTQZdpLS7aEjjiT810zqsp0U+BL2ozyPgs8
9BHNRDlsctj+92emzi8XujivmpariYaeTvFY4h2MvaIUJnubaoxN90568fS2orgb
U/DykVczyau3VIUFft7DJ7VlPYz3pfbvutfEhKmRpF51HOlqSZyZXHOJByrIzMpt
MFQCbjHWAJlvQfIemv7ybAMpKFyCjWlFxsKnMFJU1V6bjYei89IYTIGqegH6Yy4d
hOLZJCM388T4RupGk3+Mbh3IlmZq5H33Pich1c1FC/EB2v0ni5qZunEIEaYXWMES
ddLAo+2eeVCi1HSiMYWzX+DFCR1d4WU3TDJPU+eemgE/1UcJuDY=
=xIlb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Y17E
-----END PGP SIGNATURE-----
Merge tag 'ti-driver-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.13
- knav_qmss_queue: Cleanups around request_irq params and redundant code.
- ti_sci: Power management ops in preperation for suspend/resume capability.
Also includes dependency patch to export dev_pm_qos_read_value
(acked by Rafael).
* tag 'ti-driver-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Remove use of of_match_ptr() helper
firmware: ti_sci: add CPU latency constraint management
firmware: ti_sci: Introduce Power Management Ops
firmware: ti_sci: Add system suspend and resume call
firmware: ti_sci: Add support for querying the firmware caps
PM: QoS: Export dev_pm_qos_read_value
soc: ti: knav_qmss_queue: Drop redundant continue statement
soc: ti: knav_qmss_queue: Use IRQF_NO_AUTOEN flag in request_irq()
Link: https://lore.kernel.org/r/20241106121708.rso5wvc7wbhfi6xk@maverick
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The struct device_link *link field in struct qcom_ice is only used to
store the result of a device_link_add call with the
DL_FLAG_AUTOREMOVE_SUPPLIER flag. With this flag, the resulting value
can only be used to check whether the link is present or not, as per the
device_link_add description, hence this commit removes the field.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241030025046.303342-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit c14e64b469 ("soc: qcom: llcc: Support chipsets that can write
to llcc") made the code not configure certain registers on SDM845 due
to firmware security policies. That turned out only to concern SDM845,
but the condition was chosen such that all other entries (for SoCs that
didnot need it) were required to set .need_llcc_cfg = true.
Flip the condition, so the default is "doesn't need the workaround".
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241104-topic-llcc_flip-v1-1-3003c846d131@oss.qualcomm.com
[bjorn: Dropped a few newly added need_llcc_cfg uses]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This adds support for the MT8188 SoC in the MediaTek Regulator
Coupler driver, allowing stable GPU DVFS on this chip;
Moreover, this adds a new MediaTek DVFS Resource Collector (DVFSRC)
driver, allowing to enable other drivers (interconnect, regulator)
which can now communicate with the DVFSRC hardware.
Last but not least, this includes some cleanups for the CMDQ Helper
and MediaTek SVS drivers.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZyitDigcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4h1wA/1xT
8kHN16gVzZ6JvjvzOeipCi2YPJ0LCPv4jpvEx4abAP9tFsyVYsQGAE0XS74p3GRT
r9NhhlV7dnpQmVO/SPClDQ==
=cgv/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=GKpu
-----END PGP SIGNATURE-----
Merge tag 'mtk-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into arm/drivers
MediaTek soc driver updates for v6.13
This adds support for the MT8188 SoC in the MediaTek Regulator
Coupler driver, allowing stable GPU DVFS on this chip;
Moreover, this adds a new MediaTek DVFS Resource Collector (DVFSRC)
driver, allowing to enable other drivers (interconnect, regulator)
which can now communicate with the DVFSRC hardware.
Last but not least, this includes some cleanups for the CMDQ Helper
and MediaTek SVS drivers.
* tag 'mtk-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-svs: Call of_node_put(np) only once in svs_get_subsys_device()
soc: mediatek: mediatek-regulator-coupler: Support mt8188
soc: mediatek: mtk-cmdq: Move cmdq_instruction init to declaration
soc: mediatek: mtk-cmdq: Move mask build and append to function
soc: mediatek: Add MediaTek DVFS Resource Collector (DVFSRC) driver
dt-bindings: soc: mediatek: Add DVFSRC bindings for MT8183 and MT8195
Link: https://lore.kernel.org/r/20241104112625.161365-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Marek Vasut to probe soc-imx8m as platform driver,
so that it works properly with 'driver_async_probe' kernel parameter.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmcoes8UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Lewf/d2egLTwCS8M7oN3IkZWBPZ4uGjbF
p1mKI1TcQgOmPpd9gvBbXRwt+lHIb7nn2Z3xrS5eNVP5iiWSInuB5czjUyy9Unwx
vF6Vp8r+QgzPJg5wmw/qIqRvjiC0yntiLa2hrVjNSYu1ox2mFGF+JR5WTh28SqVq
5vswGFiYEfkI773fpiOG9T6LIDovLjmvaahjXDJVERmihHe2OTnfxQ6lElmWov8R
zm9rl59sJALbVI0XFu/prEZtODEmzqw2HUEykNyxU3rs8xxsVg+F+QSQpA+nT8Po
3GC/wtL7KMIE9hyUPNXoEeNRTYT9Wbd45fPaegp57VAKQt+58G+XbFiSOA==
=KusR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=AXrg
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers changes for 6.13:
- A series from Marek Vasut to probe soc-imx8m as platform driver,
so that it works properly with 'driver_async_probe' kernel parameter.
* tag 'imx-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: Use devm_* to simplify probe failure handling
soc: imx8m: Remove global soc_uid
soc: imx8m: Probe the SoC driver as platform driver
Link: https://lore.kernel.org/r/20241104090055.1881860-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable QSEECOM, and thereby access to EFI variables, for Lenovo Yoga
Slim 7x, Dell XPS 13, Microsoft Surface Pro 9.
Last Level Cache Controller (LLCC) driver code is shuffled, to improve
readability of the tables.
The Qualcomm socinfo driver gains support for QCS615, QCS9100, SAR1130P,
SAR2130P, and SA8255P.
A few drivers are simplified using dev_err_probe() and guard(), and a
few kernel-doc issues are corrected.
Mentioning of the #linux-msm IRC channel is added to the MAINTAINERS
file.
-----BEGIN PGP SIGNATURE-----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=gpat
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XpFC
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v6.13
Enable QSEECOM, and thereby access to EFI variables, for Lenovo Yoga
Slim 7x, Dell XPS 13, Microsoft Surface Pro 9.
Last Level Cache Controller (LLCC) driver code is shuffled, to improve
readability of the tables.
The Qualcomm socinfo driver gains support for QCS615, QCS9100, SAR1130P,
SAR2130P, and SA8255P.
A few drivers are simplified using dev_err_probe() and guard(), and a
few kernel-doc issues are corrected.
Mentioning of the #linux-msm IRC channel is added to the MAINTAINERS
file.
* tag 'qcom-drivers-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (30 commits)
soc: qcom: socinfo: add QCS9100 ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS9100
dt-bindings: soc: qcom,aoss-qmp: Document the QCS8300 AOSS channel
dt-bindings: soc: qcom: add qcom,qcs8300-imem compatible
dt-bindings: firmware: qcom,scm: document SCM on QCS8300 SoCs
soc: qcom: socinfo: add support for SA8255P
dt-bindings: arm: qcom: add the SoC ID for SA8255P
soc: qcom: smp2p: Simplify code with dev_err_probe()
soc: qcom: smem: Simplify code with dev_err_probe()
soc: qcom: rpmh-rsc: Simplify code with dev_err_probe()
dt-bindings: soc: qcom: aoss-qmp: document support for SA8255p
dt-bindings: firmware: qcom,scm: document support for SA8255p
dt-bindings: soc: qcom,aoss-qmp: Add SAR2130P compatible
dt-bindings: firmware: qcom,scm: Add SAR2130P compatible
soc: qcom: socinfo: add SoC IDs for SAR1130P and SAR2130P
dt-bindings: arm: qcom,ids: add SoC ID for SAR2130P and SAR1130P
dt-bindings: soc: qcom: aoss-qmp: Add SM8750
soc: qcom: socinfo: Add QCS615 SoC ID table entry
dt-bindings: arm: qcom,ids: add SoC ID for QCS615
soc: qcom: smem: Fix up kerneldoc
...
Link: https://lore.kernel.org/r/20241102231953.871067-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
-----BEGIN PGP SIGNATURE-----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=H31v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2qZ7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.12
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
EDAC/qcom: Make irq configuration optional
firmware: qcom: scm: fix a NULL-pointer dereference
firmware: qcom: scm: suppress download mode error
soc: qcom: Add check devm_kasprintf() returned value
MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings
Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add LLCC configuration for the QCS8300 platform. There is an errata on
LB_CNT information on QCS8300 platform, hardcode num_banks to get the
correct value.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241031-qcs8300_llcc-v3-2-bb56952cb83b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
