Add the ID for the Qualcomm SM4450 SoC.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230731080043.38552-7-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some boards have a retimer/redriver between the SuperSpeed
PHY and the USB-C connector to compensates signal integrity
losses mainly due to PCB & transmission cables.
Add support for an optional retimer-switch in the USB-C
connector graph.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-type-c-v5-2-9221cd300903@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
in gsbi_probe(), the return value of function clk_prepare_enable()
should be checked, since it may fail. using devm_clk_get_enabled()
instead of devm_clk_get() and clk_prepare_enable() can avoid this
problem.
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230720140834.33557-1-ruc_gongyuanjun@163.com
[bjorn: Dropped unnecessary "ret" variable]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
icc_smd_rpm will do bus clock votes itself rather than taking the
unnecessary detour through the clock subsystem. However, it can only
do that after the clocks have been handed off and scaling has been
enabled in the RPM in clk-smd-rpm.
Move the icc_smd_rpm registration from smd-rpm.c to clk-smd-rpm.c
to avoid any possible races. icc_smd_rpm gets the driver data from
the smd-rpm device, so still register the platform device on the
smd-rpm parent device.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Konrad: remove unrelated cleanups]
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-5-09c78c175546@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714175142.4067795-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To simplify with maintenance let's move the qcom power-domain drivers to
the new genpd directory. Going forward, patches are intended to be managed
through a separate git tree, according to MAINTAINERS.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a simple driver for the qcom,rpm-proc compatible that registers the
"smd-edge" and populates other children defined in the device tree.
Note that the DT schema belongs to the remoteproc subsystem while this
driver is added inside soc/qcom. I argue that the RPM *is* a remoteproc,
but as an implementation detail in Linux it can currently not benefit
from anything provided by the remoteproc subsystem. The RPM firmware is
usually already loaded and started by earlier components in the boot
chain and is not meant to be ever restarted.
To avoid breaking existing kernel configurations the driver is always
built when smd-rpm.c is also built. They belong closely together anyway.
To avoid build errors CONFIG_RPMSG_QCOM_SMD must be also built-in if
rpm-proc is.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-9-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Avoid having to look up a dummy item from SMEM to detect if it is
already available or if we need to defer probing.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-7-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is an ever growing list of compatibles in the smd-rpm.c driver.
A fallback compatible would help here but would still require keeping
the current list around for backwards compatibility.
As an alternative, let's switch the driver to match the rpmsg_device_id
instead, which is always "rpm_requests" on all platforms. Add a check
to ensure that there is a device tree node defined for the device since
otherwise the of_platform_populate() call will operate on the root node (/).
Similar approaches with matching rpmsg_device_id are already used in
qcom_sysmon, qcom_glink_ssr, qrtr, and rpmsg_wwan_ctrl.
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375 (G-Link)
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-4-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When tracing messages written to the RSC it's very useful to know the
type of TCS being targeted, in particular if/when the code borrows a
WAKE TCS for ACTIVE votes.
Add the "state" of the message to the traced information.
While at it, drop the "send-msg:" substring, as this is already captured
by the trace event itself.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620230058.428833-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The debugfs dump of Command DB relies uses %*pEp to print the resource
identifiers, with escaping of non-printable characters.
But p (ESCAPE_NP) does not escape NUL characters, so for identifiers
less than 8 bytes in length the output will retain these.
This does not cause an issue while looking at the dump in the terminal
(no known complaints at least), but when programmatically consuming the
debugfs output the extra characters are unwanted.
Change the fixed 8-byte sizeof() to a dynamic strnlen() to avoid
printing these NUL characters.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620213703.283583-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some platforms such as msm8226 do not have an iface clk. Since clk_bulk
APIs don't offer to a way to treat some clocks as optional simply add
core_clk and iface_clk members to our drvdata.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230506-msm8226-ocmem-v3-3-79da95a2581f@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use dev_err_probe in the driver probe function where useful, to simplify
getting PTR_ERR and to ensure the underlying errors are included in the
error message.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230506-msm8226-ocmem-v3-2-79da95a2581f@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since we're using these two macros to read a value from a register, we
need to use the FIELD_GET instead of the FIELD_PREP macro, otherwise
we're getting wrong values.
So instead of:
[ 3.111779] ocmem fdd00000.sram: 2 ports, 1 regions, 512 macros, not interleaved
we now get the correct value of:
[ 3.129672] ocmem fdd00000.sram: 2 ports, 1 regions, 2 macros, not interleaved
Fixes: 88c1e9404f ("soc: qcom: add OCMEM driver")
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230506-msm8226-ocmem-v3-1-79da95a2581f@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently we use predefined initial threshold values. This works, but
does not really scale well with more and more SoCs gaining bwmon support,
as the necessary kickoff values may differ between platforms due to memory
type and/or controller setup.
All of the data we need for that is already provided in the device tree,
anyway.
Change the thresholds to:
* low = 0 (as we've been doing up until now)
* med = high = BW_MIN
Throughput going below the med threshold nudges bwmon into signaling
that we should slow down (e.g. if we inherited too high bandwidth
from the bootloader).
Throughput going above the high threshold nudges bwmon into signaling
that we should speed up so as not to choke the bus traffic due to
insufficient transfer rates.
F_MIN is a perfect initial value for both of these cases - if we go
above it (and there's a 99.99% chance it'll happen at boot time), we
should definitely make the memory go faster, whereas if we go below it,
we should slow down, no matter what performance state we were at before
(it's only possible for them to be >= FMIN).
This only changes the values programmed at probe time, as high and med
thresholds are updated at interrupt, also based on the OPP table from DT.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230610-topic-bwmon_opp-v2-1-0d25c1ce7dca@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the hardware
in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKcVw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynEIQCgzJgnMCB81mirXlY1ZpCSDFqN8KIAnjRc27/1
vnUzldMQGY/FiS549gD9
=G3yz
-----END PGP SIGNATURE-----
Merge tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the
hardware in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
usb: host: xhci: Do not re-initialize the XHCI HC if being removed
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
usbip: usbip_host: Replace strlcpy with strscpy
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
USB: serial: option: add LARA-R6 01B PIDs
usb: ulpi: Make container_of() no-op in to_ulpi_dev()
usb: gadget: legacy: fix error return code in gfs_bind
usb: typec: fsa4480: add support for Audio Accessory Mode
usb: typec: fsa4480: rework mux & switch setup to handle more states
usb: typec: ucsi: call typec_set_mode on non-altmode partner change
USB: gadget: f_hid: make hidg_class a static const structure
USB: gadget: f_printer: make usb_gadget_class a static const structure
USB: mon: make mon_bin_class a static const structure
USB: gadget: udc: core: make udc_class a static const structure
USB: roles: make role_class a static const structure
dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
dt-bindings: usb: Add StarFive JH7110 USB controller
dt-bindings: usb: dwc3: Add IPQ9574 compatible
usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
...
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----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=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.
The details of PMIC can be found here[1].
Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.
The select_fifo/dma_mode() functions in geni driver enable/disable
interrupts (secondary included) conditionally for non-uart modes, while
uart is supposed to manage this internally.
However, only uart uses secondary IRQs while spi, i2c do not care about
these at all making their enablement (or disablement) totally unnecessary
for these protos.
Similarly, select_gpi_mode() also does disable s_irq and its useless again.
Drop enabling/disabling secondary IRQs.
This doesn't solve any observed problem but only gets rid of code pieces
that are not required.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1686742087-30731-1-git-send-email-quic_vnivarth@quicinc.com
Add the SoC ID for IPQ5300, which belong to the family of IPQ5332 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230605080531.3879-3-quic_kathirav@quicinc.com
The devm_ioremap() function returns NULL on error, it never returns
error pointers.
Fixes: a77b2a0b12 ("soc: qcom: Introduce RPM master stats driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/ZH7sgpLAN23bCz9v@moroto
Add support for below fields coming in socinfo structure under v19:
* num_func_clusters: number of clusters with at least one functional core
* boot_cluster: cluster selected as boot cluster
* boot_core: core selected as boot core
While at it, rename some variables to align them with their
functionalities.
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606134626.18790-3-quic_namajain@quicinc.com
Add support for below fields coming in socinfo structure under v18:
* num_kvps: number of key value pairs (KVP)
* kvps_offset: the offset of the KVP table from the base address of
socinfo structure in SMEM
KVP table has boolean values for certain feature flags, used to determine
hardware configuration.
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230606134626.18790-2-quic_namajain@quicinc.com
The enhanced detection introduced in commit '210d12c8197a ("soc: qcom:
mdt_loader: Enhance split binary detection")' requires that all segments
lies within the file on disk.
But the Qualcomm firmware files consistently has a BSS-like segment at
the end, with a p_offset aligned to the next 4k boundary. As the p_size
is 0 and there's nothing to load, the image is not padded to cover this
(empty) segment.
Ignore zero-sized segments when determining if the image is split, to
avoid this problem.
Fixes: 210d12c819 ("soc: qcom: mdt_loader: Enhance split binary detection")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # qrb5165-rb5
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230612215804.1883458-1-quic_bjorande@quicinc.com
The geni_se_xx_dma_prep() interfaces necessarily do DMA mapping before
initiating DMA transfers. This is not suitable for spi where framework
is expected to handle map/unmap.
Expose new interfaces geni_se_xx_init_dma() which do only DMA transfer.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1684325894-30252-2-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It might be useful to know what hardware version of the OCMEM block the
SoC contains. Add a debug print for that.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-ocmem-hwver-v3-1-e51f3488e0f4@z3ntu.xyz
Introduce a helper to return the SoC SMEM ID, which is used to identify the
exact SoC model as there may be differences in the same SoC family.
Currently, cpufreq-nvmem does this completely in the driver and there has
been more interest expresed for other drivers to use this information so
lets expose a common helper to prevent redoing it in individual drivers
since this field is present on every SMEM table version.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526204802.3081168-3-robimarko@gmail.com
SMEM has been GPL licensed from the start, and there is no reason to use
EXPORT_SYMBOL() so switch to the GPL version.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Trilok Soni <quic_tsoni@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526204802.3081168-2-robimarko@gmail.com
Move SMEM item struct and related defines to a header in order to be able
to reuse them in the SMEM driver instead of duplicating them.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526204802.3081168-1-robimarko@gmail.com
Commit ebeb20a9cd ("soc: qcom: mdt_loader: Always invoke PAS
mem_setup") dropped the relocate check and made pas_mem_setup run
unconditionally. The code was later moved with commit f4e526ff7e
("soc: qcom: mdt_loader: Extract PAS operations") to
qcom_mdt_pas_init() effectively losing track of what was actually
done.
The assumption that PAS mem_setup can be done anytime was effectively
wrong, with no good reason and this caused regression on some SoC
that use remoteproc to bringup ath11k. One example is IPQ8074 SoC that
effectively broke resulting in remoteproc silently die and ath11k not
working.
On this SoC FW relocate is not enabled and PAS mem_setup was correctly
skipped in previous kernel version resulting in correct bringup and
function of remoteproc and ath11k.
To fix the regression, reintroduce the relocate check in
qcom_mdt_pas_init() and correctly skip PAS mem_setup where relocate is
not enabled.
Fixes: ebeb20a9cd ("soc: qcom: mdt_loader: Always invoke PAS mem_setup")
Tested-by: Robert Marko <robimarko@gmail.com>
Co-developed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526115511.3328-1-ansuelsmth@gmail.com
Add the power domains exposed by RPMh in the Qualcomm SA8155P platform.
Turns out they differ from SM8150.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411-topic-hanaau-v2-2-fd3d70844b31@linaro.org
The following error was reported when building x86_64 allmodconfig:
error: the following would cause module name conflict:
drivers/soc/qcom/ice.ko
drivers/net/ethernet/intel/ice/ice.ko
Seems the 'ice' module name is already used by some Intel ethernet
driver, so lets rename the Qualcomm Inline Crypto Engine (ICE) module
from 'ice' to 'qcom_ice' to avoid any kind of errors/confusions.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 2afbf43a4a ("soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver")
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516082856.150214-1-abel.vesa@linaro.org
Add the SoC ID for IPQ5312 and IPQ5302, which belong to the family of
IPQ5332 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509033531.21468-3-quic_kathirav@quicinc.com
Add SOC IDs for the IPQ5018 family.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230429193336.600629-2-robimarko@gmail.com
Introduce a driver to query and expose detailed, per-subsystem (as opposed
to the existing qcom_stats driver which exposes SoC-wide data) about low
power mode states of a given RPM master. That includes the APSS (ARM),
MPSS (modem) and other remote cores, depending on the platform
configuration.
This is a vastly cleaned up and restructured version of a similar
driver found in msm-5.4.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230405-topic-master_stats-v6-2-2277b4433748@linaro.org
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230421025046.4008499-15-tj@kernel.org
'qrc' is known to be non-NULL at this point.
Checking for 'qrc->desc' was expected instead, so use it.
Fixes: a723c95fa1 ("soc: qcom: Add Qualcomm Ramp Controller driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/84727a79d0261b4112411aec23b553504015c02c.1681684138.git.christophe.jaillet@wanadoo.fr
When a platform_driver's .remove() callback returns an error, the driver
core emits
remove callback returned a non-zero value. This will be ignored.
. Replace this by a more specific error message. Then convert to
.remove_new() which is equivalent to returning zero unconditionally in
.remove(). See commit 5c5a7680e6 ("platform: Provide a remove callback
that returns no value") for its rationale.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230415201848.3779001-1-u.kleine-koenig@pengutronix.de
Use cpu_to_le32 to cast constants to __le32 before comparing
them with __le32 type pd->key. This fixes the following sparse
warnings:
drivers/soc/qcom/rpmpd.c:895:31: sparse: warning: restricted __le32 degrades to integer
drivers/soc/qcom/rpmpd.c:896:15: sparse: warning: restricted __le32 degrades to integer
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230522160757.284165-1-minhuadotchen@gmail.com
It may be that the offset of the first program header lies inside the mdt's
filesize, in this case the loader would incorrectly assume that the bins
were not split and in this scenario the firmware authentication fails.
This change updates the logic used by the mdt loader to understand whether
the firmware images are split or not. It figures this out by checking if
each programs header's segment lies within the file or not.
Co-developed-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509001821.24010-1-quic_gokukris@quicinc.com
Pass to dev_err_probe() PTR_ERR from actual dev_pm_opp_find_bw_floor()
call which failed, instead of previous ret which at this point is 0.
Failure of dev_pm_opp_find_bw_floor() would result in prematurely ending
the probe with success.
Fixes smatch warnings:
drivers/soc/qcom/icc-bwmon.c:776 bwmon_probe() warn: passing zero to 'dev_err_probe'
drivers/soc/qcom/icc-bwmon.c:781 bwmon_probe() warn: passing zero to 'dev_err_probe'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202305131657.76XeHDjF-lkp@intel.com/
Cc: <stable@vger.kernel.org>
Fixes: b9c2ae6cac ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230513111747.132532-1-krzysztof.kozlowski@linaro.org
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
The most notable updates this time are for Qualcomm Snapdragon platforms.
The Inline-Crypto-Engine gets a new DT binding and driver. A number of
drivers now support additional Snapdragon variants, in particular the
rsc, scm, geni, bwm, glink and socinfo, while the llcc (edac) and rpm
drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces.
-----BEGIN PGP SIGNATURE-----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=r6jm
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The most notable updates this time are for Qualcomm Snapdragon
platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
and a number of drivers now support additional Snapdragon variants, in
particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
(edac) and rpm drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces"
* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: ti: smartreflex: Simplify getting the opam_sr pointer
bus: vexpress-config: Add explicit of_platform.h include
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
memory: mtk-smi: mt8365: Add SMI Support
dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
memory: tegra: read values from correct device
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
ARM: tegra: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
...
-----BEGIN PGP SIGNATURE-----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=jQJ7
-----END PGP SIGNATURE-----
Merge tag '20230407105029.2274111-4-abel.vesa@linaro.org' into drivers-for-6.4
The dedicated ICE driver was merged through a immutable tag, to make it
available to other maintainers.
This takes the already existing duplicated support in both ufs-qcom
and sdhci-msm drivers and makes it a dedicated driver that can be used
by both mentioned drivers.
The reason for this is because, staring with SM8550, the ICE IP block
is shared between UFS and SDCC, which means we need to probe a dedicated
device and share it between those two consumers.
So let's add the ICE dedicated driver as a soc driver.
Platforms that already have ICE supported, will use it as a library
as the of_qcom_ice_get will return an ICE instance created for the
consumer device. This allows the backwards compatibility with old-style
devicetree approach.
Also, add support to HW version 4.x since it works out-of-the-box with
the current driver. The 4.x HW version is found on SM8550 platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407105029.2274111-4-abel.vesa@linaro.org
RSC v3 register offsets are same for all minor versions of v3. Fix a
minor version check to pick correct offsets for all v3 minor versions.
Fixes: 40482e4f73 ("soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets")
Signed-off-by: Tushar Nimkar <quic_tnimkar@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230406115732.9293-1-quic_tnimkar@quicinc.com
Preparing for better lockdep annotations for things that happen in runpm
suspend/resume path vs shrinker/reclaim in the following patches, we
need to avoid allocations that can trigger reclaim in the icc_set_bw()
path. In the RPMh case, rpmh_write_batch() already uses GFP_ATOMIC, so
it should be reasonable to use in the smd-rpm case as well.
Alternatively, 256bytes is small enough for a function that isn't called
recursively to allocate on-stack.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230320144356.803762-21-robdclark@gmail.com
The BWMON hardware has two sets of registers: one for the monitor itself
and one called "global". It has what seems to be some kind of a head
switch and an interrupt control register. It's usually 0x200 in size.
On fairly recent SoCs (with the starting point seemingly being moving
the OSM programming to the firmware) these two register sets are
contiguous and overlapping, like this (on sm8450):
/* notice how base.start == global_base.start+0x100 */
reg = <0x90b6400 0x300>, <0x90b6300 0x200>;
reg-names = "base", "global_base";
Which led to some confusion and the assumption that since the
"interesting" global registers begin right after global_base+0x100,
there's no need to map two separate regions and one can simply subtract
0x100 from the offsets.
This is however not the case for anything older than SDM845, as the
global region can appear in seemingly random spots on the register map.
Handle the case where the global registers are mapped separately to allow
proper functioning of BWMONv4 on MSM8998 and older. Add specific
compatibles for 845, 8280xp, 7280 and 8550 (all of which use the single
reg space scheme) to keep backwards compatibility with old DTs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-3-77a050c2fbda@linaro.org
bwmon->regmap was never used, as the regmap for bwmon is registered
through devres and accessed through bwmon's regmap_field members.
Remove it
Fixes: ec63dcd3c8 ("soc: qcom: icc-bwmon: use regmap and prepare for BWMON v5")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-2-77a050c2fbda@linaro.org
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the open-code with dev_err_probe() to simplify the code.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/202303241018532824420@zte.com.cn
Only register UCSI on know working devices, like on the SM8450
or SM8550 which requires UCSI to get USB mode switch events.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-4-552f3b721f9e@linaro.org
There is no need to manually set the owner of a struct class, as the
registering function does it automatically, so remove all of the
explicit settings from various drivers that did so as it is unneeded.
This allows us to remove this pointer entirely from this structure going
forward.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313181843.1207845-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The maximum VMID for assign_mem is 63. Use a u64 to represent this
bitmap instead of architecture-dependent "unsigned int" which varies in
size on 32-bit and 64-bit platforms.
Acked-by: Kalle Valo <kvalo@kernel.org> (ath10k)
Tested-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213181832.3489174-1-quic_eberman@quicinc.com
It goes without saying that socname_rpmpds[] is the array of the RPM
power domains associated with socname. Remove these comments.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-rpmpd-v3-10-06a4f448ff90@linaro.org
The GPU core clock requires that both VDDGX and VDDMX domains are scaled
at the same rate at the same time (well, MX just before GX but you get
the idea). Set MX as parent of GX to take care of that.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-rpmpd-v3-9-06a4f448ff90@linaro.org
In some cases (like with the GPU core clock on GMU-less SoCs) it's
required that we scale more than one voltage domain. This can be achieved
by linking them in a parent-child relationship. Add support for specifying
a parent PD, similarly to what has been done in the RPMhPD driver.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-rpmpd-v3-8-06a4f448ff90@linaro.org
Currently the whitespace between [DT_BINDING] = &struct is all over
the place.. some SoC structs have a space, others have a tab, others
have N tabs.. Make that a single tab for everybody to keep things
coherent.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-rpmpd-v3-7-06a4f448ff90@linaro.org
Now that we aren't bound by the preprocessor macros, improve the naming
to be a bit less preprocessor-y and touch up some rpmpd.pd.name fields
while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-rpmpd-v3-6-06a4f448ff90@linaro.org
Expand the struct definition macros to make things easier to see and
maintain. Now that the macros are unnecessary, remove them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-rpmpd-v3-5-06a4f448ff90@linaro.org
It's rather obvious by the characteristic of these resources that
they correspond to some voltage lines governed by RPM. Remove the
"vdd" unnecessary prefix from them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-rpmpd-v3-4-06a4f448ff90@linaro.org
Up until now, we had 2 separate entries for VDD_LPI[CM]X and
VDD_LPI_[CM]X which both pointed to the same RPM resource. Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-rpmpd-v3-3-06a4f448ff90@linaro.org
Replace the SoC names with type+id_key (or type+id+..name..+key for
fixed-key definitions) and remove duplicate entries.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-rpmpd-v3-1-06a4f448ff90@linaro.org
The platforms based on SDM845 SoC locks the access to EDAC registers in the
bootloader. So probing the EDAC driver will result in a crash. Hence,
disable the creation of EDAC platform device on all SDM845 devices.
The issue has been observed on Lenovo Yoga C630 and DB845c.
While at it, also sort the members of `struct qcom_llcc_config` to avoid
any holes in-between.
Cc: <stable@vger.kernel.org> # 5.10
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-15-manivannan.sadhasivam@linaro.org
Not all Qcom platforms support IRQ mode for ECC handling. For those
platforms, the current EDAC driver will not be probed due to missing ECC
IRQ in devicetree.
So add support for polling mode so that the EDAC driver can be used on all
Qcom platforms supporting LLCC.
The polling delay of 5000ms is chosen based on Qcom downstream/vendor
driver.
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-14-manivannan.sadhasivam@linaro.org
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for
accessing the (Control and Status Registers) CSRs of each LLCC bank.
This stride only works for some SoCs like SDM845 for which driver
support was initially added.
But the later SoCs use different register stride that vary between the
banks with holes in-between. So it is not possible to use a single register
stride for accessing the CSRs of each bank. By doing so could result in a
crash.
For fixing this issue, let's obtain the base address of each LLCC bank from
devicetree and get rid of the fixed stride. This also means, there is no
need to rely on reg-names property and the base addresses can be obtained
using the index.
First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC
supports more than one bank, then those need to be defined in devicetree
for index from 1..N-1.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-13-manivannan.sadhasivam@linaro.org
Update max processor count to reflect the number of co-processors on
SA8775P SoCs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209095753.447347-2-brgl@bgdev.pl
The QCOM_KRYO_L2_ACCESSORS can be compile tested only on ARM64 because
it references asm/sysreg.h present only on ARM64. Mark the dependency
correct, even though as a non-selectable option it does not have real
effect.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123202601.1296983-1-krzysztof.kozlowski@linaro.org
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230310144724.1545153-1-robh@kernel.org
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/soc/qcom/qcom_gsbi.c:117:34: error: ‘tcsr_dt_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230310214413.275054-1-krzysztof.kozlowski@linaro.org
Older platforms don't have qcom,vmid set, handle -EINVAL return value
correctly. And since num_vmids is passed to of_property_read_u32_array
later we should make sure it has a sane value before continuing.
Fixes: e656cd0bcf ("soc: qcom: rmtfs: Optionally map RMTFS to more VMs")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230305-rmtfs-vmid-fix-v1-2-6a7206081602@z3ntu.xyz
of_property_count_u32_elems returns a negative integer when an error
happens , but since the value was assigned to an unsigned integer, the
check never worked correctly. Also print the correct variable in the
error print, ret isn't used here.
Fixes: e656cd0bcf ("soc: qcom: rmtfs: Optionally map RMTFS to more VMs")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230305-rmtfs-vmid-fix-v1-1-6a7206081602@z3ntu.xyz
The slice IDs for CVPFW, CPUSS1 and CPUWHT currently overflow the 32bit
LLCC config registers, which means it is writing beyond the upper limit
of the ATTR0_CFGn and ATTR1_CFGn range of registers. But the most obvious
impact is the fact that the mentioned slices do not get configured at all,
which will result in reduced performance. Fix that by using the slice ID
values taken from the latest LLCC SC table.
Fixes: ec69dfbdc4 ("soc: qcom: llcc: Add sc8180x and sc8280xp configurations")
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306135527.509796-1-abel.vesa@linaro.org
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A
SEAnnokGCDtA/BNIXeES
=luRi
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
Move include/linux/qcom-geni-se.h to include/linux/soc/qcom/geni-se.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Link: https://lore.kernel.org/r/20230203210133.3552796-1-quic_eberman@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
Add support for new field coming with socinfo structure under v17 to get
hardware platform's oem variant id. This is to enable OEMs to have minor
changes in the board, but to use the same platform subtype as the one
supported by Qualcomm. The new field is to be used in platform overlay
file. Default value is 0, reserved for Qualcomm platforms. Also, add
debugfs support to read this field for a device.
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127041200.29094-1-quic_namajain@quicinc.com
Adding compatible string to support RPM communication over SMD for
IPQ9574 SoC
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113150310.29709-2-quic_devipriy@quicinc.com
gcc with W=1 reports
drivers/soc/qcom/pmic_glink_altmode.c:223:13: error: variable ‘svid’ set but not used [-Werror=unused-but-set-variable]
223 | u16 svid;
From reviewing the code, the setting of alt_port->svid does the same calculation.
Both are not needed. For debuggablity, keep the setting of local svid.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206135831.1794583-1-trix@redhat.com
This driver relies on SMEM to populate items for each subsystem before
the device probes. The items in SMEM that are being looked for are
populated by the subsystems lazily, and therefore may not exist until
the device has booted. For example, if I build this driver into the
kernel on Trogdor Lazor and boot up, I don't see a 'modem' debugfs file
populated, because the modem boots and populates the SMEM item after
this driver probes.
Always populate the files for the subsystems if they're in SMEM, and
make the qcom_subsystem_sleep_stats_show() function return 0 if the SMEM
items still isn't there. This way we can run a simple command like
grep ^ /sys/kernel/debug/qcom_stats/*
and collect the subsystem sleep stats without interspersed errors or
missing details entirely because this driver probed first.
Fixes: 1d77246903 ("soc: qcom: Add Sleep stats driver")
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119032329.2909383-1-swboyd@chromium.org
QMI is a network protocol, so anything using requires CONFIG_NET
to be enabled as well:
WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS
Depends on [n]: NET [=n]
Selected by [m]:
- QCOM_PDR_HELPERS [=m]
arm-linux-gnueabi-ld: drivers/soc/qcom/qmi_interface.o: in function `qmi_send_new_lookup':
qmi_interface.c:(.text+0xf0): undefined reference to `kernel_sendmsg'
Add the dependency to both QCOM_PDR_HELPERS and QCOM_PMIC_GLINK to make
it clearly what the dependency is when another PDR user is added.
pmic_glink also needs CONFIG_OF:
drivers/soc/qcom/pmic_glink_altmode.c: In function 'pmic_glink_altmode_probe':
drivers/soc/qcom/pmic_glink_altmode.c:418:33: error: 'struct drm_bridge' has no member named 'of_node'
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206193804.191343-1-arnd@kernel.org
With the PMIC GLINK service, the host OS subscribes to USB-C altmode
messages, which are sent by the firmware to notify the host OS about
state updates and HPD interrupts.
The pmic_glink_altmode driver registers for these notifications and
propagates the notifications as typec_mux, typec_switch and DRM OOB
notifications as necessary to implement DisplayPort altmode support.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8350 PDX215
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-MTP & SM8450-HDK
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201041853.1934355-4-quic_bjorande@quicinc.com
The PMIC GLINK service runs on one of the co-processors of some modern
Qualcomm platforms and implements USB-C and battery managements. It uses
a message based protocol over GLINK for communication with the OS, hence
the name.
The driver implemented provides the rpmsg device for communication and
uses auxiliary bus to spawn off individual devices in respective
subsystem. The auxiliary devices are spawned off from a
platform_device, so that the drm_bridge is available early, to allow the
DisplayPort driver to probe even before the remoteproc has spun up.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8350 PDX215
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-MTP & SM8450-HDK
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201041853.1934355-3-quic_bjorande@quicinc.com
Arnd asks for the DCC driver to be dropped for now, in order to allow
for more thorough review, by a wider audience, of the ABI introduced.
The Devicetree binding is adequately describing the hardware block, so
this is kept.
Requested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations. For example:
<...>
iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SM4250 and SM6115 use a shared device tree and the RPMPDs are
identical. There's no need for a separate entry, so remove it.
This reverts commit 5b617b1b10.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113152232.2624545-1-konrad.dybcio@linaro.org
Add the new SoCs added in qcom,ids.h to the soc_id array so they show
up correctly in the socinfo sysfs.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104115348.25046-5-stephan@gerhold.net
The soc_id array is mostly ordered by the numeric "msm-id" defined in
qcom,ids.h but some recent entries were added at the wrong place.
While it does not make a functional difference it does make it harder
to regenerate the entire array after adding a bunch of new IDs.
Fixes: de320c07da ("soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table")
Fixes: 147f6534b8 ("soc: qcom: socinfo: Add SM8550 ID")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104115348.25046-2-stephan@gerhold.net
Updated error handling in the async packer router driver made an
optional property required, fix this. Also improve error handling in the
probe function of the CPR driver.
-----BEGIN PGP SIGNATURE-----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=66gk
-----END PGP SIGNATURE-----
Merge tag 'qcom-driver-fixes-for-6.2' into drivers-for-6.3
Qualcomm driver fixes for v6.2
Updated error handling in the async packer router driver made an
optional property required, fix this. Also improve error handling in the
probe function of the CPR driver.
Some SoCs require that RMTFS is also mapped to the NAV VM. Trying to
power on the modem without that results in the whole platform
crashing and forces a hard reboot within about 2 seconds. Add support
for mapping the region to additional VMs, such as NAV to open a path
towards enabling modem on such platforms.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[Konrad: reword, make conditional and flexible, add a define for NAV VMID]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109130523.298971-2-konrad.dybcio@linaro.org
The five msm8976_cfg_* objects ought to be static, as reported by LKP
and sparse, fix this.
drivers/soc/qcom/ramp_controller.c:235:27: sparse: sparse: symbol 'msm8976_cfg_dfs_sid' was not declared. Should it be static?
drivers/soc/qcom/ramp_controller.c:246:27: sparse: sparse: symbol 'msm8976_cfg_link_sid' was not declared. Should it be static?
drivers/soc/qcom/ramp_controller.c:250:27: sparse: sparse: symbol 'msm8976_cfg_lmh_sid' was not declared. Should it be static?
drivers/soc/qcom/ramp_controller.c:256:27: sparse: sparse: symbol 'msm8976_cfg_ramp_en' was not declared. Should it be static?
drivers/soc/qcom/ramp_controller.c:262:27: sparse: sparse: symbol 'msm8976_cfg_ramp_dis' was not declared. Should it be static?
Fixes: a723c95fa1 ("soc: qcom: Add Qualcomm Ramp Controller driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230110042004.2378444-1-quic_bjorande@quicinc.com
Add power domain description for sa8775p and a new compatible to match it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109174511.1740856-15-brgl@bgdev.pl
If an error occurs after a successful pm_genpd_init() call, it should be
undone by a corresponding pm_genpd_remove().
Add the missing call in the error handling path, as already done in the
remove function.
Fixes: bf6910abf5 ("power: avs: Add support for CPR (Core Power Reduction)")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/0f520597dbad89ab99c217c8986912fa53eaf5f9.1671293108.git.christophe.jaillet@wanadoo.fr
The return value from the call to kstrtouint_from_user() is int.
However, the return value is being assigned to
an unsigned int variable 'ret', so making 'ret' an int.
Eliminate the following warning:
./drivers/soc/qcom/dcc.c:815:5-8: WARNING: Unsigned expression compared with zero: ret < 0
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3638
Fixes: 4cbe60cf5a ("soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106011710.2827-1-yang.lee@linux.alibaba.com
APR should not fail if the service device tree node does not have
the qcom,protection-domain property, since this functionality does
not exist on older platforms such as MSM8916 and MSM8996.
Ignore -EINVAL (returned when the property does not exist) to fix
a regression on 6.2-rc1 that prevents audio from working:
qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1:
Failed to read second value of qcom,protection-domain
qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1:
Failed to add apr 3 svc
Fixes: 6d7860f575 ("soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221229151648.19839-3-stephan@gerhold.net
Add support for new fields coming with socinfo structure under v16 to get
SKU information, product code and name and type of different parts present
in the SoC. Also, add debugfs nodes to read feature and product codes to
allow user to get SKU and other SoC details. Support for SoC parts name
and type parsing will be added separately. Details of fields added:
* feature_code: mapped to qcom internal and external SKU IDs
* pcode: product code
* npartnamemap_offset: parts name map array offset from socinfo base ptr
* nnum_partname_mapping: number of part mappings
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221125103533.2960-1-quic_namajain@quicinc.com
Building ramp_controller under x86_64 results in the following build
error:
error: implicit declaration of function 'FIELD_PREP' is invalid in C99
Include linux/bitfield.h to ensure FIELD_PREP() is declared.
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DCC is a DMA Engine designed to capture and store data
during system crash or software triggers. The DCC operates
based on user inputs via the debugfs interface. The user gives
addresses as inputs and these addresses are stored in the
dcc sram. In case of a system crash or a manual software
trigger by the user through the debugfs interface,
the dcc captures and stores the values at these addresses.
This patch contains the driver which has all the methods
pertaining to the debugfs interface, auxiliary functions to
support all the four fundamental operations of dcc namely
read, write, read/modify/write and loop. The probe method
here instantiates all the resources necessary for dcc to
operate mainly the dedicated dcc sram where it stores the
values. The DCC driver can be used for debugging purposes
without going for a reboot since it can perform software
triggers as well based on user inputs.
Also add the documentation for debugfs entries which explains
the functionalities of each debugfs file that has been created
for dcc.
The following is the justification of using debugfs interface
over the other alternatives like sysfs/ioctls
i) As can be seen from the debugfs attribute descriptions,
some of the debugfs attribute files here contains multiple
arguments which needs to be accepted from the user. This goes
against the design style of sysfs.
ii) The user input patterns have been made simple and convenient
in this case with the use of debugfs interface as user doesn't
need to shuffle between different files to execute one instruction
as was the case on using other alternatives.
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Reviewed-by: Alex Elder <elder@linaro.org>
[bjorn: Fixed up a few indents and line wraps]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/644b4f66a358492a8a6738454035c3b120092fe7.1672148732.git.quic_schowdhu@quicinc.com
The Ramp Controller is used to program the sequence ID for pulse
swallowing, enable sequence and linking sequence IDs for the CPU
cores on some Qualcomm SoCs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117132956.169432-3-angelogioacchino.delregno@collabora.com
bigger updates, the rest is driver updates all over the place
-----BEGIN PGP SIGNATURE-----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=/It5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core got a new helper 'i2c_client_get_device_id()', designware got
some bigger updates, the rest is driver updates all over the place"
* tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (41 commits)
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
i2c: mux: reg: check return value after calling platform_get_resource()
i2c: xiic: Make sure to disable clock on .remove()
i2c: hisi: Add support to get clock frequency from clock
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
i2c: slave-eeprom: Convert to i2c's .probe_new()
i2c: mux: pca954x: Convert to i2c's .probe_new()
drivers/i2c: use simple i2c probe
i2c: mux: pca9541: switch to using .probe_new
i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
i2c: qcom-geni: add support for I2C Master Hub variant
i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant
soc: qcom: geni-se: add support for I2C Master Hub wrapper variant
soc: qcom: geni-se: add desc struct to specify clocks from device match data
dt-bindings: i2c: qcom-geni: document I2C Master Hub serial I2C engine
dt-bindings: qcom: geni-se: document I2C Master Hub wrapper variant
dt-bindings: i2c: renesas,riic: Document RZ/Five SoC
i2c: tegra: Set ACPI node as primary fwnode
i2c: smbus: add DDR support for SPD
i2c: /pasemi: PASemi I2C controller IRQ enablement
...
SM4250 has the same RPM power domains as SM6115. Add SM4250
support by reusing SM6115 power domains.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221127112204.1486337-3-bhupesh.sharma@linaro.org
The LLCC found in SM8550 supports more slice configuration knobs and HW
block version has been bumped up to 4.1. Add support for the new version
and make sure the new config values are programed on probe.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116113005.2653284-2-abel.vesa@linaro.org
The RSC interrupt is issued only after the request is complete. For
fire-n-forget requests, the irq-done interrupt is sent after issuing the
RPMH request and for response-required request, the interrupt is
triggered only after all the requests are complete.
These unnecessary checks in the interrupt handler issues AHB reads from
a critical path. Lets remove them and clean up error handling in
rpmh_request data structures.
Co-developed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116112246.2640648-2-abel.vesa@linaro.org
The SM8550 RSC has a new set of register offsets due to its version bump.
So read the version from HW and use the proper register offsets based on
that.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116112246.2640648-1-abel.vesa@linaro.org
Add the power domains exposed by RPMH in the Qualcomm SM8550 platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116111745.2633074-3-abel.vesa@linaro.org
Add SoC ID table entries for MSM8956 and MSM8976 chips.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-8-angelogioacchino.delregno@collabora.com
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.
Add the clock list for the I2C Master Hub variant to a new desc struct
then pass it through the I2C Master Hub compatible match data.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.
Prepare support for the I2C Master Hub variant by moving the required
clocks list to a new desc struct then passing it through the compatible
match data.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The next wakeup timer value needs to be set in always on domain timer
as the arch timer interrupt can not wakeup the SoC if after the deepest
CPUidle states the SoC also enters deepest low power state.
To wakeup the SoC in such scenarios the earliest wakeup time is set in
CONTROL_TCS and the firmware takes care of setting up its own timer in
always on domain with next wakeup time. The timer wakes up the RSC and
sets resources back to wake state.
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8450
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221018152837.619426-7-ulf.hansson@linaro.org
Add changes to save drv's base address for rsc. This is
used to read drv's configuration such as solver mode is
supported or to write into CONTROL_TCS registers.
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8450
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221018152837.619426-6-ulf.hansson@linaro.org
RSC is part the CPU subsystem and powers off the CPU domains when all
the CPUs and no RPMH transactions are pending from any of the drivers.
The RSC needs to flush the 'sleep' and 'wake' votes that are critical
for saving power when all the CPUs are in idle.
Let's make RSC part of the CPU PM domains, by attaching it to the
cluster power domain. Registering for PM domain notifications, RSC
driver can be notified that the last CPU is powering down. When the last
CPU is powering down the domain, let's flush the 'sleep' and 'wake'
votes that are stored in the data buffers into the hardware and also
write next wakeup in CONTROL_TCS.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8450
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221018152837.619426-3-ulf.hansson@linaro.org
As idr_alloc() and of_property_read_string_index() can return negative
numbers, it should be better to check the return value and deal with
the exception.
Therefore, it should be better to use goto statement to stop and return
error.
Fixes: 6adba21eb4 ("soc: qcom: Add APR bus driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107014403.3606-1-jiasheng@iscas.ac.cn
Implement the support for SAW v2.3, used in at least MSM8976, MSM8956
and APQ variants and while at it also add the configuration for the
MSM8976's little (a53) and big (a72) clusters cache power management.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
[Marijn: reorder struct definitions to follow high-to-low order]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104133452.131227-3-angelogioacchino.delregno@collabora.com
The function platform_get_irq prints an error message into the kernel
log when the irq isn't found.
Since the interrupt is actually optional and not provided by some SoCs,
use platform_get_irq_optional which does not print an error message.
Fixes: c081f3060f ("soc: qcom: Add support to register LLCC EDAC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104153041.412020-1-luca.weiss@fairphone.com
This driver purely exposes information from memory to the kernel. Let's
mark it as not having any device PM functionality, so that during
suspend we skip even trying to call a suspend function on this device.
This clears up suspend logs more than anything else, but it also shaves
a few cycles off suspend.
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221015004934.3930651-2-swboyd@chromium.org
This driver purely exposes information from memory to the kernel. Let's
mark it as not having any device PM functionality, so that during
suspend we skip even trying to call a suspend function on this device.
This clears up suspend logs more than anything else, but it also shaves
a few cycles off suspend.
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221015004934.3930651-1-swboyd@chromium.org
Commit ff6d365898 ("soc: qcom: qmi: use const for struct
qmi_elem_info") allows QMI message encoding/decoding rules to be
const, so do that for QCOM PDR.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220914234705.28405-5-quic_jjohnson@quicinc.com
In some cases the hardware that the bootloader has left configured
depends on RPMH power domains for their operation up until the point
where the related Linux device driver probes and can inherit that
configuration, or power down the hardware gracefully.
Unfortunately as Linux probes the releavant drivers in sequence there
are periods during the Linux boot flow where either the genpd refcount
will reach 0, or worse where the active performance_state votes does not
meet the requirements of the state that the hardware was left in.
One specific example of this is during boot of e.g. SM8150/SC8180X,
where the display clock controller probes, without any particular
performance state needs (to access its registers). This will drop the
MMCX rail to MIN_SVS, which isn't sufficient to sustain the clock rates
that the later probing MDP is configured to. This results in an
unrecoverable system state.
Handle both these cases by keeping the RPMH power-domais that are
referenced voted for highest state, until sync_state indicates that all
devices referencing the RPMH power-domain driver has been probed.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Added print for sync_state errors]
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220915205559.14574-1-quic_bjorande@quicinc.com
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for flexible-array members in unions.
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/224
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/YzIvNIyPhWaG2DTr@work
The Snapdragon 670 has similar power domains to SDM845 but no EBI power
domain. Add a new array for them to avoid requesting a power domain which
is unsupported by the hardware.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221004221130.14076-3-mailingradian@gmail.com
The Qualcomm SoC ID values are encoded in few places: DTS files,
Devicetree bindings (both used by some of Qualcomm bootloaders or tools)
and in soc_id table of socinfo driver. Do not duplicate the actual
values in the last one but use the constants from the bindings.
Tested by comparing output object file (exactly the same).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220830065744.161163-3-krzysztof.kozlowski@linaro.org
In some SoCs we have to force clear the counter/irq clear registers as
they are not self clearing after they are written into.
sc7280 seems to be one such SoC, handle this with a quirk flag.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220902043511.17130-4-quic_rjendra@quicinc.com
Add support for sc7280 BWMON instance measuring traffic between LLCC and
memory with the v5 register layout.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220902043511.17130-3-quic_rjendra@quicinc.com
The LLCC EDAC register offsets varies between each SoCs. Until now, the
EDAC driver used the hardcoded register offsets. But this caused crash
on SM8450 SoC where the register offsets has been changed.
So to avoid this crash and also to make it easy to accommodate changes for
new SoCs, let's pass the LLCC version specific register offsets to the
EDAC driver.
Currently, two set of offsets are used. One is starting from LLCC version
v1.0.0 used by all SoCs other than SM8450. For SM8450, LLCC version
starting from v2.1.0 is used.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220825043859.30066-3-manivannan.sadhasivam@linaro.org
The register offsets used by the LLCC block retains its layout for multiple
versions. For instance, starting from version v1.0.0 to v2.0.1 the offsets
are same. And starting from v2.1.0, the offsets changed.
But the current reg_offset naming convention is confusing. So to reflect
this change correctly in driver, let's encode the start version from which
the offsets got changed in reg_offset struct name. This will be
llcc_v1_reg_offset for v1.0.0 and llcc_v2_1_reg_offset for v2.1.0.
This will allow multiple SoCs to use the same reg_offset clearly.
And in the future if the offsets got changed again, then that specific
version could be encoded in the struct name.
Suggested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220825043859.30066-2-manivannan.sadhasivam@linaro.org
Currently all usage of struct qmi_elem_info, which is used to define
the QMI message encoding/decoding rules, does not use const. This
prevents clients from registering const arrays. Since these arrays are
always pre-defined, they should be const, so add the const qualifier
to all places in the QMI interface where struct qmi_elem_info is used.
Once this patch is in place, clients can independently update their
pre-defined arrays to be const, as demonstrated in the QMI sample
code.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220822153435.7856-1-quic_jjohnson@quicinc.com
Return value from devm_regmap_field_bulk_alloc() directly
instead of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220823133620.211902-1-cui.jinpeng2@zte.com.cn
SDM845 is a special case compared to the other platforms that use RPMh
stats, since it only has 2 stats (aosd and cxsd), while the others have
a 3rd one (ddr).
So lets add dedicated stats config and compatible for SDM845 to make the
driver aware of this num_records difference.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220812101240.1869605-2-abel.vesa@linaro.org
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS_OF
Depends on [n]: PM_GENERIC_DOMAINS [=y] && OF [=n]
Selected by [m]:
- QCOM_RPMPD [=m] && PM [=y] && QCOM_SMD_RPM [=m]
PM_GENERIC_DOMAINS_OF depends on OF, so QCOM_RPMPD also depends on it.
Fixes: 7d0221fb59 ("soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220820113202.23940-1-yuehaibing@huawei.com
In qcom_smem_state_register() and qcom_smem_state_release(), we
should better use of_node_get() and of_node_put() for the reference
creation and destruction of 'device_node'.
Fixes: 9460ae2ff3 ("soc: qcom: Introduce common SMEM state machine code")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220721135217.1301039-2-windhl@126.com
There are two refcount leak bugs in qcom_smsm_probe():
(1) The 'local_node' is escaped out from for_each_child_of_node() as
the break of iteration, we should call of_node_put() for it in error
path or when it is not used anymore.
(2) The 'node' is escaped out from for_each_available_child_of_node()
as the 'goto', we should call of_node_put() for it in goto target.
Fixes: c97c4090ff ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220721135217.1301039-1-windhl@126.com
The SDM845 comes with few instances of Bandwidth Monitor. The already
supported one monitors traffic between CPU and Last Level Cache
Controller (LLCC) and in downstream sources is called BWMON v4 (or v4 of
register layout).
SDM845 also has also BWMON instance measuring traffic between LLCC and
memory with different register layout: called v5.
Add support for this "LLCC" BWMON. Differences against existing v4 one:
1. No global interrupts.
2. Different register layout.
3. Different shift of interrupt fields.
4. Smaller sampling window.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-10-krzysztof.kozlowski@linaro.org
Refactor the code to prepare it for supporting BWMON v5 which comes with
different register layout by:
1. Adding use of MMIO regmap and regmap fields which allows to keep one
code logic with different register maps.
2. The "clear" type registers do not allow reading, therefore regmap
requires using cache with default values.
3. regmap has an effect of introducing barriers after each readl/writel,
which should negligible effect as only few writes were relaxed.
4. Additionally usage of regmap fields removes need of shifting the
register values.
5. Add "V4" prefix to names of all defines with register addresses (so
BWMON_V4_xxx) to differentiate it from V5. The actual register values
are shared so keep their naming.
6. While changing the defines, pad register addresses to three digits
for readability.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-8-krzysztof.kozlowski@linaro.org
Versions v4 and v5 of BWMON on SDM845 use different unit count, so allow
easier variant customization by storing its value in struct
icc_bwmon_data.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-7-krzysztof.kozlowski@linaro.org
The hardware programming guide recommends to clear all registers on
first initialization, through separate field in BWMON_CLEAR register.
This makes sense in general but especially if driver is rebound to avoid
spurious/early interrupts.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-6-krzysztof.kozlowski@linaro.org
Instead of copying pieces of variant-specific data (struct
icc_bwmon_data) into the state container (struct icc_bwmon), just store
a pointer to it.
This simplifies a bit the code and allows later to grow easily the
variant-specific data for new BWMON v5.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-5-krzysztof.kozlowski@linaro.org
The interrupt enable, status and clear registers have the same layout,
so BWMON_GLOBAL_IRQ_ENABLE_ENABLE define can be used also for clearing
IRQ, instead of hard-coded value.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-3-krzysztof.kozlowski@linaro.org
There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic
version of the MMIO accessors, which is intended to help
understand problems with device drivers and has been part
of Qualcomm's vendor kernels for many years.
- A patch from Sebastian Siewior to rework the handling of
IRQ stacks in softirqs across architectures, which is
needed for enabling PREEMPT_RT.
- The last patch to remove the CONFIG_VIRT_TO_BUS option and
some of the code behind that, after the last users of this
old interface made it in through the netdev, scsi, media and
staging trees.
-----BEGIN PGP SIGNATURE-----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=aTR0
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management
to allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and
use the firmware interfaces for system power control and for
power capping.
-----BEGIN PGP SIGNATURE-----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=0dZI
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC drivers from Arnd Bergmann:
"The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management to
allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and use
the firmware interfaces for system power control and for power
capping"
* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
soc: a64fx-diag: disable modular build
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: fujitsu: Add A64FX diagnostic interrupt driver
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
...
Add the new "qcom,rpm-msm8909" compatible to the driver so the interface
to the Resource Power Manager (RPM) is initialized correctly on MSM8909.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220705143523.3390944-3-stephan.gerhold@kernkonzept.com
Eliminate the follow coccicheck warning:
./drivers/soc/qcom/icc-bwmon.c:349:2-9: line 349 is redundant because platform_get_irq() already prints an error
Fixes: b9c2ae6cac ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220714075532.104665-1-yang.lee@linux.alibaba.com
Change the id of SA8540P to its correct value, i.e., 461.
Also, map the id 460 to its correct values, i.e. SA8295P.
Fixes: 76ee15ae1b ("soc: qcom: socinfo: Add some more PMICs and SoCs")
Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711083957.12091-1-quic_ppareek@quicinc.com
QCOM_RPMPD requires PM_GENERIC_DOMAINS/_OF, which in turns requires
CONFIG_PM. I forgot about the latter in my earlier patch (it's still
in -next as of the time of committing, hence no Fixes: tag). Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707212158.32684-1-konrad.dybcio@somainline.org
Bandwidth monitoring (BWMON) sits between various subsytems like CPU,
GPU, Last Level caches and memory subsystem. The BWMON can be
configured to monitor the data throuhput between memory and other
subsytems. The throughput is measured within specified sampling window
and is used to vote for corresponding interconnect bandwidth.
Current implementation brings support for BWMON v4, used for example on
SDM845 to measure bandwidth between CPU (gladiator_noc) and Last Level
Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth
votes from cpufreq (CPU nodes) thus achieve high memory throughput even
with lower CPU frequencies.
The driver was tested on SDM845.
Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-3-krzysztof.kozlowski@linaro.org
The driver uses generic genpd OF APIs and with a very minimal config
where nothing else selects them, this driver will not probe, as
of_genpd_add_provider_onecell will return -EOPNOTSUPP.
Make sure to select these in Kconfig to prevent that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701073700.17124-1-konrad.dybcio@somainline.org
When compiling with -Wformat, clang emits the following warnings:
drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "bad host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "duplicate host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct one and change type of
remote_host to "u16" to match with other types.
Signed-off-by: Bill Wendling <morbo@google.com>
Tested-by: Justin Stitt <jstitt007@gmail.com>
Reviewed-by: Justin Stitt <jstitt007@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak.
Fixes: 05589b30b2 ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606064252.42595-1-linmq006@gmail.com
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer.
Fixes: 88c1e9404f ("soc: qcom: add OCMEM driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220602042430.1114-1-linmq006@gmail.com
Commit ac0126a017 ("soc: qcom: cmd-db: replace strncpy() with
strscpy_pad()") breaks booting on my sc7280-herobrine-herobrine
device. From printouts I see that at bootup the function is called
with an id of "lnbclka2" which is 8 bytes big.
Previously all 8 bytes of this string were copied to the
destination. Now only 7 bytes will be copied since strscpy_pad() saves
a byte for '\0' termination.
We don't need the '\0' termination in the destination. Let's go back
to strncpy(). According to the warning:
If a caller is using non-NUL-terminated strings, strncpy() can still
be used, but destinations should be marked with the __nonstring
attribute to avoid future compiler warnings.
...so we'll do that.
While we're at it, let's change the query array to use
"sizeof(ent->id)" so it can't possibly go out of sync with our later
copy.
Fixes: ac0126a017 ("soc: qcom: cmd-db: replace strncpy() with strscpy_pad()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628064301.v3.1.Ie7b480cd99e2c13319220cbc108caf2bcd41286b@changeid
Correct kerneldoc warnings like:
drivers/soc/qcom/mdt_loader.c:126:
warning: Function parameter or member 'fw_name' not described in 'qcom_mdt_read_metadata'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073301.7072-2-krzysztof.kozlowski@linaro.org
The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad(), to keep existing
pad-behavior of strncpy. This fixes W=1 warning:
drivers/soc/qcom/cmd-db.c: In function ‘cmd_db_get_header.part.0’:
drivers/soc/qcom/cmd-db.c:151:9: warning: ‘strncpy’ specified bound 8 equals destination size [-Wstringop-truncation]
151 | strncpy(query, id, sizeof(query));
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073301.7072-1-krzysztof.kozlowski@linaro.org
The remove callback is only called by the driver core if there is a
driver to unbind, so there is no need to check dev->driver to be
non-NULL.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220618203913.35785-1-u.kleine-koenig@pengutronix.de
Some sc7180 Chromebooks actually have sc7180P (known by many names,
apparently, including possibly sc7180 Pro and sc7185). This is a
sc7180 part that has slightly higher clock speeds.
The official ID number allocated to these devices by Qualcomm is 495
so we'll add an entry to the table for them. Note that currently
shipping BIOS for these devices will actually end up reporting an ID
of 407 due to a bug but eventually a new BIOS will be released which
corrects it to 495.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220523085437.v3.1.I26eca1856f99e6160d30de6d50ecab60e6226354@changeid
Disable MMIO tracing for GENI SE driver to prevent excessive
logging. Any access over serial console would involve a lot of
TX and RX register accesses (and few others), so these MMIO
read/write trace events in these drivers cause a lot of unwanted
noise because of the high frequency of such operations and it is
not very useful tracing these events for such drivers.
Given we want to enable these trace events on development devices
(maybe not production devices) where performance also really
matters so that we don't regress other components by wasting CPU
cycles and memory collecting these traces, it makes more sense to
disable these traces from such drivers.
Also another reason to disable these traces would be to prevent
recursive tracing when we display the trace buffer containing
these MMIO trace events since writing onto serial console would
further record MMIO traces.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sparse reports this repesentative issue
pdr_internal.h:31:22: warning: symbol 'servreg_location_entry_ei' was not declared. Should it be static?
Similar for other servreg_*
Global variables should not be defined in header files.
This only works because pdr_internal.h is only included
by pdr_interface.c. Single file use variables should be
static so add static to their storage-class specifiers.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422173806.21982-1-trix@redhat.com
The Qualcomm sc8280xp platform has 13 and the sa8540p platform has 11
power-domains. Add compatibles, the typically used ones power-domains
and their relevant active-only variants, to the RPMh power-domain
driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220426233508.1762345-4-bjorn.andersson@linaro.org
In some cases the DT binding will fully describe the set of available
RPMh power-domains, but there is no reason for exposing them all in the
implementation.
Omitting individual data->domains is handle gracefully by
of_genpd_add_provider_onecell(), so there's no reason for printing a
warning when this occurs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220426233508.1762345-3-bjorn.andersson@linaro.org
MSM8974PRO is commonly used for referring to Snapdragon 801, compared to
MSM8974 which is Snapdragon 800.
The Snapdragon 801 has three variants with different clock speeds, with
the -AA, -AB and -AC suffix.
Adjust the names in socinfo to reflect this.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415195449.617040-1-luca@z3ntu.xyz
Structures in shared memory that can be modified by remote
processors may have untrusted values, they should be validated
before use.
Adding proper validation before using fields of shared
structures.
Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1646147913-15791-2-git-send-email-quic_deesin@quicinc.com
SMEM driver is IO mapping complete region and CPU is doing a speculative
read into a partition where local HOST does not have permission resulting
in a NOC error.
Map only those partitions which are accessibly to local HOST.
Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1646147913-15791-1-git-send-email-quic_deesin@quicinc.com
The llcc-qcom driver can be compiled as a module, but lacks
MODULE_DEVICE_TABLE() and will therefore not be loaded automatically.
Fix this.
Fixes: a3134fb09e ("drivers: soc: Add LLCC driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220408213336.581661-3-bjorn.andersson@linaro.org
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220324072435.63070-1-jakobkoschel@gmail.com
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: c97c4090ff ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308073648.24634-1-linmq006@gmail.com
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 50e9964141 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308071942.22942-1-linmq006@gmail.com
The updated condition checking if a segment can be found in the loaded
firmware blob, or need to be loaded from a separate file, incorrectly
classifies segments that ends at the end of the loaded blob. The result
is that the mdt loader attempts to load the segment from a separate
file.
Correct the conditional to use the loaded segment instead.
Fixes: ea90330fa3 ("soc: qcom: mdt_loader: Extend check for split firmware")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220215034819.1209367-1-bjorn.andersson@linaro.org
Newer LLCC HW have different register offsets for several registers,
currently of which LLCC hardware info and status are used to identify
the LLCC version information and other data. So use separate table to
keep track of these register offsets which vary by different LLCC HW
versions and eases any future addition in variations of register offsets
for newer hardware.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/c655d16d945aef2d7fc8e7c212f3e1c58a84eb95.1643355594.git.quic_saipraka@quicinc.com
Newer SoCs with LLCC IP version 2.1.0.0 and later support write
sub-cache cacheable feature. Use a separate llcc_slice_config member
"write_scid_cacheable_en" to identify this feature and program
LLCC_TRP_SCID_WRSC_CACHEABLE_EN register to enable it.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/83372c8178f579d055ec58212ce5af5d55abadd4.1643355594.git.quic_saipraka@quicinc.com
LLCC HW version info is made up of major, branch, minor and echo
version bits each of which are 8bits. Several features in newer
LLCC HW are based on the full version rather than just major or
minor versions such as write-subcache enable which is applicable
for versions v2.0.0.0 and later, also upcoming write-subcache
cacheable for SM8450 SoC which is only present in versions v2.1.0.0
and later, so it makes it easier and cleaner to just directly
compare with the full version than adding additional major/branch/
minor/echo version checks. So remove the earlier major version check
and add full version check for those features.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/a82d7c32348c51fcc2b63e220d91b318bf706c83.1643355594.git.quic_saipraka@quicinc.com
Add SM8350, SC8280XP, SA8540P and one more SM8450 and various PMICs
found on boards on these platforms to the socinfo driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220210051043.748275-1-bjorn.andersson@linaro.org
Rather than passing a boolean to indicate if the PAS operations should
be performed from within __mdt_load(), extract them to their own helper
function.
This will allow clients to invoke this directly, with some
qcom_scm_pas_metadata context that they later needs to release, without
further having to complicate the prototype of qcom_mdt_load().
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-9-bjorn.andersson@linaro.org
After spelunking various old kernel trees no finds has been found
indicating that the PAS mem_setup call should actually be made
conditional on the image being relocatable.
Group the two PAS operations together, to facilitate splitting them out
in a following patch.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-8-bjorn.andersson@linaro.org
Move the traversal of the program headers to the start of the function,
to make sure that min_ and max_addr are in scope as the call to
qcom_scm_pas_mem_setup() is moved in the next commit.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-7-bjorn.andersson@linaro.org
Some of the Qualcomm SM8450 firmware files are padded such that the
start of the first segment falls within the .mdt file but the segment to
be loaded is stored as a separate .bNN file.
Extend the condition to only attempt to read a segment inline if the
entire segment would be available.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-6-bjorn.andersson@linaro.org
It's been observed that some firmware found on Qualcomm SM8450 devices
carries the hash segment as the last segment in the ELF. Extend the
support to allow picking the hash from any segment in the MDT/MBN.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-5-bjorn.andersson@linaro.org
It's been observed that some firmware found in a Qualcomm SM8450 device
has the hash table in a separate .bNN file. Use the newly extracted
helper function to load this segment from the separate file, if it's
determined that the hashes are not part of the already loaded firmware.
In order to do this, the function needs access to the firmware basename
and to provide more useful error messages a struct device to associate
the errors with.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-4-bjorn.andersson@linaro.org
Spotted in a SM8450 device, the hash metadata segment is split out in a
separate .bNN file which means that the logic for loading split out
segmenents needs to be duplicated in qcom_mdt_read_metadata().
Split out the existing logic to a helper function that can be used in
both code paths.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-3-bjorn.andersson@linaro.org
Starting with Qualcomm SM8450, some new security enhancements has been
done in the secure world, which results in the requirement to keep the
metadata segment accessible by the secure world from init_image() until
auth_and_reset().
Introduce a "PAS metadata context" object that can be passed to
init_image() for tracking the mapped memory and a related release
function for client drivers to release the mapping once either
auth_and_reset() has been invoked or in error handling paths on the way
there.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-2-bjorn.andersson@linaro.org
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
which need to keep the irq line disabled until the threaded handler has
been run.". When applied to an interrupt that doesn't request a threaded
irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
which it to disable the forced threading of the irq. For "normal" kernels
(without forced threading) then, if there is no thread_fn, then
IRQF_ONESHOT is a nop.
In this case disabling forced threading is not appropriate for this driver
because it calls wake_up_all() and this API cannot be called from
no-thread interrupt handlers on PREEMPT_RT systems (deadlock risk, triggers
sleeping-while-atomic warnings).
Fix this by removing IRQF_ONESHOT.
Fixes: 2209481409 ("soc: qcom: Add AOSS QMP driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[bjorn: Added Fixes tag]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220127173554.158111-1-daniel.thompson@linaro.org
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220114085019.42904-1-vulab@iscas.ac.cn
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling paths.
Fixes: 8c75d585b9 ("soc: qcom: aoss: Expose send for generic usecase")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220108095931.21527-1-linmq006@gmail.com
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: 01f937ffc4 ("soc: qcom: ocmem: don't return NULL in of_get_ocmem")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220107073126.2335-1-linmq006@gmail.com
Because of the possible failure of the allocation, data->domains might
be NULL pointer and will cause the dereference of the NULL pointer
later.
Therefore, it might be better to check it and directly return -ENOMEM
without releasing data manually if fails, because the comment of the
devm_kmalloc() says "Memory allocated with this function is
automatically freed on driver detach.".
Fixes: bbe3a66c3f ("soc: qcom: rpmpd: Add a Power domain driver to model corners")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211231094419.1941054-1-jiasheng@iscas.ac.cn
Both SoCs are known as 'lagoon' downstream. Add their ids to the socinfo
driver.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213081111.20217-1-luca.weiss@fairphone.com
Sort all power-domain defines and the SoC specific lists in
alphabetical order for better readability.
No functional changes.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1639063917-9011-5-git-send-email-quic_rjendra@quicinc.com
The requirement to specify the active + sleep and active-only MX
power-domains as the parents of the corresponding CX power domains is
not applicable on sc7280. Fix it by using the cx/cx_ao structs for
sc7280 instead of the _w_mx_parent ones.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1639063917-9011-4-git-send-email-quic_rjendra@quicinc.com
The rpmhpd structs were named with a SoC-name prefix, but then
they got reused across multiple SoC families making things confusing.
Rename all the struct names to remove SoC-name prefixes.
While we do this we end up with some power-domains without parents,
and some with and at times different parents across SoCs.
use a _w_<parent-name>_parent suffix for such cases.
No functional change as part of this patch.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1639063917-9011-3-git-send-email-quic_rjendra@quicinc.com
Add the power domains exposed by RPMH in the Qualcomm SM8450 platform.
Unlike previous generations CX domain is not a child of MX domain.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201072745.3969077-7-vkoul@kernel.org
Update max processor count to reflect the number of co-processors on
SM8450 SoCs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201072745.3969077-5-vkoul@kernel.org
The only usage of qmp_cooling_device_ops is to pass its address to
devm_thermal_of_cooling_device_register() which takes a pointer to const
struct thermal_cooling_device_ops as argument. Make it const to allow
the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211128210317.25504-1-rikard.falkeborn@gmail.com
do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211125014311.45942-1-deng.changcheng@zte.com.cn
Not all RPM firmware versions have the dynamic sleep stats offset
available. Most older versions use a fixed offset of 0xdba0.
Add support for this using new SoC-specific compatibles for APQ8084,
MSM8226, MSM8916 and MSM8974.
Even older SoCs seem to use a different offset and stats format.
If needed those could be supported in the future by adding separate
compatibles for those with a different stats_config.
Cc: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211119213953.31970-3-stephan@gerhold.net
QCM2290 has the same RPM power domains as SM6115. Add QCM2290
support by reusing SM6115 power domains.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211108134442.30051-4-shawn.guo@linaro.org
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
ARM_QCOM_SPM_CPUIDLE can be selected when compile-testing on
other architectures, but this causes a Kconfig warning
for QCOM_SPM:
WARNING: unmet direct dependencies detected for QCOM_SPM
Depends on [n]: ARCH_QCOM [=n]
Selected by [y]:
- ARM_QCOM_SPM_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y]
Make it possible to also compile-test this one, which can
be done now that v5.15-rc5 lets you select QCOM_SCM everywhere.
Fixes: a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Fixes: 498ba2a8a2 ("cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This immutable branch is based on v5.15-rc1 and contains the following
patches extending the existig APR driver to also implement GPR:
20210927135559.738-2-srinivas.kandagatla@linaro.org20210927135559.738-3-srinivas.kandagatla@linaro.org20210927135559.738-4-srinivas.kandagatla@linaro.org20210927135559.738-5-srinivas.kandagatla@linaro.org20210927135559.738-6-srinivas.kandagatla@linaro.org
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmFSiE4bHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FNV0P/1R/t0Dfj+vJg8SarPPg
u/2LbLBAhFfn0WoVJgdYmpW3lG3kxG+z7I4s5gDdKCrKeyj//jJReRVwkgG4QxNs
NgSAd24o/afb4/jcNTlmbhIyo+k9gsU5rxw7AynwRkLOyfNG71sytEH/1LvzBj1F
X5AVQlzEnTsclVlwK3n9ZSm3cKiwgyFnqBLZs+e199FVjJgFGk6WDPplWPo50+hz
pYImAVPGRbwSGH6cR2M4JSwpU/GJzFAAZf5Y8GrEBQVyhiQeKvYV7UNPjbNt15tv
qI8Xfa5xbgAFunRC6GsjpaffTmCzHJKYgikchbIKre906IYBLwDHTnxvtXXDgBVe
Zrd0jFQIrtuHseLQkvaEiVuuzmFibm/atdMUWCyncdunl2fuwTS60hCG+mRd7Pz2
B85HmcAfS7LTu+dkn4doG4zVHO/JVpYr2eZExb1wxY0Kyz+5KDsESqUCB+7c6wya
rGqsC+LX8l0MjunxSJbZUcuQLLcaFN9AXJTB6a0gPk+VLZH7EutkG98SonYU07w/
Wff0bwVQWk3I4QHf0NaS5Ikbcx8KAv1ZaqcUaL2pPYNtIamkiyJdH6f+4C0q+K6n
aMcLNLzaRcVayHO88SG3XpDLNc+cR2f/rehAkghxXJ8jhdtV5HSb5HLKgu+Lf8q4
hEBzBQLYeRFJM1TuaZL02aXw
=r7vf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF3+W4ACgkQJNaLcl1U
h9C+DQf7Bxzz7xjGv5AFyZ8eZbAx0LnTBp9SytON2gh5mxWGUCI0kxSdnEd/ot9u
PUhWMf7192kQw4qmkZArdtKiaxhZdKZvXZ0kTfyoTvcR4o9fdgWtMUla5QhBVzAu
UgZbTH91wDt4P68cYzLrhG8gFlagzSwRT8WF4imJmcJsehPq22Nz70tK5tSePZko
KcbnpkqYV19CQRJsEKXBivAptpE/oAQJBSoYVw/gkizqrznNGI2cqWBl+krGOdBW
zI+CZbzuAwTi9xNu3tmlcgPDGxOHYFVU7aIy2w/ENNRsAbWgFThcO25pWBKROtKc
45uC5fj24R6cCCyuygwFJuLoeRy31Q==
=ts3p
-----END PGP SIGNATURE-----
Merge tag '20210927135559.738-6-srinivas.kandagatla@linaro.org' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into v11_20211026_srinivas_kandagatla_asoc_qcom_add_audioreach_support for audioreach support
v5.15-rc1 + 20210927135559.738-[23456]-srinivas.kandagatla@linaro.org
This immutable branch is based on v5.15-rc1 and contains the following
patches extending the existig APR driver to also implement GPR:
20210927135559.738-2-srinivas.kandagatla@linaro.org20210927135559.738-3-srinivas.kandagatla@linaro.org20210927135559.738-4-srinivas.kandagatla@linaro.org20210927135559.738-5-srinivas.kandagatla@linaro.org20210927135559.738-6-srinivas.kandagatla@linaro.org
Fix following coccicheck warning:
./drivers/soc/qcom/smp2p.c:501:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before goto
Early exits from for_each_available_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014062350.8942-1-wanjiabing@vivo.com
Fix following coccicheck warning:
./drivers/soc/qcom/apr.c:485:1-23: WARNING: Function
for_each_child_of_node should have of_node_put() before return
Early exits from for_each_child_of_node should decrement the
node reference counter.
Fixes: 8347356626 ("soc: qcom: apr: Add avs/audio tracking functionality")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014083017.19714-1-wanjiabing@vivo.com
This patch adds feature negotiation and ssr ack feature between
local host and remote processor. Local host can negotiate on common
features supported with remote processor.
When ssr ack feature bit is set, the remote processor will tell local
host when it is reinitialized. All clients registered for falling edge
interrupts will be notified when the smp2p entries are cleared for ssr.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1633450403-21281-1-git-send-email-deesin@codeaurora.org
Let's add a driver to read the stats from remote processor and
export to debugfs.
The driver creates "qcom_sleep_stats" directory in debugfs and
adds files for various low power mode available. Below is sample
output with command
cat /sys/kernel/debug/qcom_sleep_stats/ddr
count = 0
Last Entered At = 0
Last Exited At = 0
Accumulated Duration = 0
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[mkshah: add subsystem sleep stats, create one file for each stat]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1634107104-22197-3-git-send-email-mkshah@codeaurora.org
Add IDs for PMK8001 and PMI8996. They also fall in the list of
'duplicated' IDs, where the same index was used for multiple chips.
Fixes: 7fda2b0bfb ("soc: qcom: socinfo: import PMIC IDs from pmic-spmi")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016190607.49866-1-dmitry.baryshkov@linaro.org
The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performance state
is needed further requests has to be made.
But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().
But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turned off.
Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.
The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.
Fixes: 279b7e8a62 ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211005033732.2284447-1-bjorn.andersson@linaro.org
Practically all modern Qualcomm platforms has a single reserved-memory
region for SMEM. So rather than having to describe SMEM in the form of a
node with a reference to a reserved-memory node, allow the SMEM device
to be instantiated directly from the reserved-memory node.
The current means of falling back to dereferencing the "memory-region"
is kept as a fallback, if it's determined that the SMEM node is a
reserved-memory node.
The "qcom,smem" compatible is added to the reserved_mem_matches list, to
allow the reserved-memory device to be probed.
In order to retain the readability of the code, the resolution of
resources is split from the actual ioremapping.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20210930182111.57353-4-bjorn.andersson@linaro.org
Qualcomm Generic Packet router aka GPR is the IPC mechanism found
in AudioReach next generation signal processing framework to perform
command and response messages between various processors.
GPR has concepts of static and dynamic port, all static services like
APM (Audio Processing Manager), PRM (Proxy resource manager) have
fixed port numbers where as dynamic services like graphs have dynamic
port numbers which are allocated at runtime. All GPR packet messages
will have source and destination domain and port along with opcode
and payload.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-6-srinivas.kandagatla@linaro.org
APR and other packet routers like GPR are pretty much same and
interact with other drivers in similar way.
Ex: GPR ports can be considered as APR services, only difference
is they are allocated dynamically.
Other difference is packet layout, which should not matter
with the apis abstracted. Apart from this the rest of the
functionality is pretty much identical across APR and GPR.
Make the apr code more reusable by abstracting it service level,
rather than device level so that we do not need to write
new drivers for other new packet routers like GPR.
This patch is in preparation to add GPR support to this driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-4-srinivas.kandagatla@linaro.org
Strip out the load state power-domain support from the driver since the
low power mode signalling for the co-processors is now accessible through
the direct qmp message send interface.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-12-git-send-email-sibis@codeaurora.org
Remote susbsystems notify fatal crash through smp2p interrupt.
When remoteproc crashes it can cause soc to come out of low power
state and may not allow again to enter in low power state until
crash is handled.
Mark smp2p interrupt wakeup capable so that interrupt handler is
executed and remoteproc crash can be handled in system resume path.
This patch marks interrupt wakeup capable but keeps wakeup disabled
by default. User space can enable it based on its requirement for
wakeup from suspend.
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632220467-27410-1-git-send-email-deesin@codeaurora.org
Disable MMUHWT retention for SC7280 as done for other platforms
to avoid more power burn.
Fixes: f6a07be633 ("soc: qcom: llcc: Add configuration data for SC7280")
Signed-off-by: Naina Mehta <nainmeht@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921055942.30600-1-saiprakash.ranjan@codeaurora.org
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. The safe replacement is strscpy().
This is a previous step in the path to remove the strcpy() function
entirely from the kernel.
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210808125012.4715-2-len.baker@gmx.com
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-6-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-5-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-4-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-3-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-2-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210908080216.1301-1-caihuoqing@baidu.com
IPQ8074 family SoC ID-s are missing, so lets add them based on
the downstream driver.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Kathiravan T <kathirav@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210905171131.660885-1-robimarko@gmail.com
Add support for MSM8953 power domains.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210825170252.20137-1-sireeshkodali1@gmail.com
Implement the support for SAW v4.1, used in at least MSM8998,
SDM630, SDM660 and APQ variants and, while at it, also add the
configuration for the SDM630/660 Silver and Gold cluster L2
Adaptive Voltage Scaler: this is also one of the prerequisites
to allow the OSM controller to perform DCVS.
Please note that despite there are various "versions" of these
values downstream, these are the only ones that are perfectly
stable on the entire set of tested devices.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-4-angelogioacchino.delregno@somainline.org
In commit a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic
CPUidle driver") the SPM driver has been converted to a
generic CPUidle driver: that was mainly made to simplify the
driver and that was a great accomplishment;
Though, at that time, this driver was only applicable to ARM 32-bit SoCs,
lacking logic about the handling of newer generation SAW.
In preparation for the enablement of SPM features on AArch64/ARM64,
split the cpuidle-qcom-spm driver in two: the CPUIdle related
state machine (currently used only on ARM SoCs) stays there, while
the SPM communication handling lands back in soc/qcom/spm.c and
also making sure to not discard the simplifications that were
introduced in the aforementioned commit.
Since now the "two drivers" are split, the SCM dependency in the
main SPM handling is gone and for this reason it was also possible
to move the SPM initialization early: this will also make sure that
whenever the SAW CPUIdle driver is getting initialized, the SPM
driver will be ready to do the job.
Please note that the anticipation of the SPM initialization was
also done to optimize the boot times on platforms that have their
CPU/L2 idle states managed by other means (such as PSCI), while
needing SAW initialization for other purposes, like AVS control.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
Add LLCC configuration data for SM6350 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203105.229764-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the power domains exposed by RPMH in the Qualcomm SM6350 platform.
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203105.229764-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Not all upcoming usecases will have an interface to allow the aoss
driver to hook onto. Expose the send api and create a get function to
enable drivers to send their own messages to aoss.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1630420228-31075-2-git-send-email-deesin@codeaurora.org
PT_LOAD type denotes that the segment should be loaded into the final
firmware memory region. Hash segment is not one such, because it's only
needed for PAS init and shouldn't be in the final firmware memory region.
That's why mdt_phdr_valid() explicitly reject non PT_LOAD segment and
hash segment. This actually makes the hash segment type check in
qcom_mdt_read_metadata() unnecessary and redundant. For a hash segment,
it won't be loaded into firmware memory region anyway, due to the
QCOM_MDT_TYPE_HASH check in mdt_phdr_valid(), even if it has a PT_LOAD
type for some reason (misusing or abusing?).
Some firmware files on Sony phones are such examples, e.g WCNSS firmware
of Sony Xperia M4 Aqua phone. The type of hash segment is just PT_LOAD.
Drop the unnecessary hash segment type check in qcom_mdt_read_metadata()
to fix firmware loading failure on these phones, while hash segment is
still kept away from the final firmware memory region.
Fixes: 498b98e939 ("soc: qcom: mdt_loader: Support loading non-split images")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210828070202.7033-1-shawn.guo@linaro.org
Set qcom_socinfo pointer as data being stored instead of pointer
to soc_device structure. Aligns with future calls to platform_get_data()
which expects qcom_socinfo pointer.
Fixes: efb448d0a3 ("soc: qcom: Add socinfo driver")
Signed-off-by: Antonio Martorana <amartora@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1629159879-95777-1-git-send-email-amartora@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform
support and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhLz215t5GS2LDRf4RAjlHAJ473D0PymaTzv68EuPHThG+DEPifQCdGjLq
QGBB6JidIP8rtEdC+LWBB8I=
=M5+N
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
The SMSM driver detects interrupt edges by tracking the last state
it has seen (and has triggered the interrupt handler for). This works
fine, but only if the interrupt does not change state while masked.
For example, if an interrupt is unmasked while the state is HIGH,
the stored last_value for that interrupt might still be LOW. Then,
when the remote processor triggers smsm_intr() we assume that nothing
has changed, even though the state might have changed from HIGH to LOW.
Attempt to fix this by checking the current remote state before
unmasking an IRQ. Use atomic operations to avoid the interrupt handler
from interfering with the unmask function.
This fixes modem crashes in some edge cases with the BAM-DMUX driver.
Specifically, the BAM-DMUX interrupt handler is not called for the
HIGH -> LOW smsm state transition if the BAM-DMUX driver is loaded
(and therefore unmasks the interrupt) after the modem was already started:
qcom-q6v5-mss 4080000.remoteproc: fatal error received: a2_task.c:3188:
Assert FALSE failed: A2 DL PER deadlock timer expired waiting for Apps ACK
Fixes: c97c4090ff ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712135703.324748-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
