Niklas Cassel <nks@flawful.org> says:
This series adds support for Command Duration Limits.
The series is based on linux tag: v6.4-rc1
The series can also be found in git: https://github.com/floatious/linux/commits/cdl-v7
=================
CDL in ATA / SCSI
=================
Command Duration Limits is defined in:
T13 ATA Command Set - 5 (ACS-5) and
T10 SCSI Primary Commands - 6 (SPC-6) respectively
(a simpler version of CDL is defined in T10 SPC-5).
CDL defines Duration Limits Descriptors (DLD).
7 DLDs for read commands and 7 DLDs for write commands.
Simply put, a DLD contains a limit and a policy.
A command can specify that a certain limit should be applied by setting
the DLD index field (3 bits, so 0-7) in the command itself.
The DLD index points to one of the 7 DLDs.
DLD index 0 means no descriptor, so no limit.
DLD index 1-7 means DLD 1-7.
A DLD can have a few different policies, but the two major ones are:
-Policy 0xF (abort), command will be completed with command aborted error
(ATA) or status CHECK CONDITION (SCSI), with sense data indicating that
the command timed out.
-Policy 0xD (complete-unavailable), command will be completed without
error (ATA) or status GOOD (SCSI), with sense data indicating that the
command timed out. Note that the command will not have transferred any
data to/from the device when the command timed out, even though the
command returned success.
Regardless of the CDL policy, in case of a CDL timeout, the I/O will
result in a -ETIME error to user-space.
The DLDs are defined in the CDL log page(s) and are readable and writable.
Reading and writing the CDL DLDs are outside the scope of the kernel.
If a user wants to read or write the descriptors, they can do so using a
user-space application that sends passthrough commands, such as cdl-tools:
https://github.com/westerndigitalcorporation/cdl-tools
================================
The introduction of ioprio hints
================================
What the kernel does provide, is a method to let I/O use one of the CDL DLDs
defined in the device. Note that the kernel will simply forward the DLD index
to the device, so the kernel currently does not know, nor does it need to know,
how the DLDs are defined inside the device.
The way that the CDL DLD index is supplied to the kernel is by introducing a
new 10 bit "ioprio hint" field within the existing 16 bit ioprio definition.
Currently, only 6 out of the 16 ioprio bits are in use, the remaining 10 bits
are unused, and are currently explicitly disallowed to be set by the kernel.
For now, we only add ioprio hints representing CDL DLD index 1-7. Additional
ioprio hints for other QoS features could be defined in the future.
A theoretical future work could be to make an I/O scheduler aware of these
hints. E.g. for CDL, an I/O scheduler could make use of the duration limit
in each descriptor, and take that information into account while scheduling
commands. Right now, the ioprio hints will be ignored by the I/O schedulers.
==============================
How to use CDL from user-space
==============================
Since CDL is mutually exclusive with NCQ priority
(see ncq_prio_enable and sas_ncq_prio_enable in
Documentation/ABI/testing/sysfs-block-device),
CDL has to be explicitly enabled using:
echo 1 > /sys/block/$bdev/device/cdl_enable
Since the ioprio hints are supplied through the existing I/O priority API,
it should be simple for an application to make use of the ioprio hints.
It simply has to reuse one of the new macros defined in
include/uapi/linux/ioprio.h: IOPRIO_PRIO_HINT() or IOPRIO_PRIO_VALUE_HINT(),
and supply one of the new hints defined in include/uapi/linux/ioprio.h:
IOPRIO_HINT_DEV_DURATION_LIMIT_[1-7], which indicates that the I/O should
use the corresponding CDL DLD index 1-7.
By reusing the I/O priority API, the user can both define a DLD to use per
AIO (io_uring sqe->ioprio or libaio iocb->aio_reqprio) or per-thread
(ioprio_set()).
=======
Testing
=======
With the following fio patches:
https://github.com/floatious/fio/commits/cdl
fio adds support for ioprio hints, such that CDL can be tested using e.g.:
fio --ioengine=io_uring --cmdprio_percentage=10 --cmdprio_hint=DLD_index
A simple way to test is to use a DLD with a very short duration limit,
and send large reads. Regardless of the CDL policy, in case of a CDL
timeout, the I/O will result in a -ETIME error to user-space.
We also provide a CDL test suite located in the cdl-tools repo, see:
https://github.com/westerndigitalcorporation/cdl-tools#testing-a-system-command-duration-limits-support
We have tested this patch series using:
-real hardware
-the following QEMU implementation:
https://github.com/floatious/qemu/tree/cdl
(NOTE: the QEMU implementation requires you to define the CDL policy at compile
time, so you currently need to recompile QEMU when switching between policies.)
===================
Further information
===================
For further information about CDL, see Damien's slides:
Presented at SDC 2021:
https://www.snia.org/sites/default/files/SDC/2021/pdfs/SNIA-SDC21-LeMoal-Be-On-Time-command-duration-limits-Feature-Support-in%20Linux.pdf
Presented at Lund Linux Con 2022:
https://drive.google.com/file/d/1I6ChFc0h4JY9qZdO1bY5oCAdYCSZVqWw/view?usp=sharing
================
Changes since V6
================
-Rebased series on v6.4-rc1.
-Picked up Reviewed-by tags from Hannes (Thank you Hannes!)
-Picked up Reviewed-by tag from Christoph (Thank you Christoph!)
-Changed KernelVersion from 6.4 to 6.5 for new sysfs attributes.
For older change logs, see previous patch series versions:
https://lore.kernel.org/linux-scsi/20230406113252.41211-1-nks@flawful.org/https://lore.kernel.org/linux-scsi/20230404182428.715140-1-nks@flawful.org/https://lore.kernel.org/linux-scsi/20230309215516.3800571-1-niklas.cassel@wdc.com/https://lore.kernel.org/linux-scsi/20230124190308.127318-1-niklas.cassel@wdc.com/https://lore.kernel.org/linux-scsi/20230112140412.667308-1-niklas.cassel@wdc.com/https://lore.kernel.org/linux-scsi/20221208105947.2399894-1-niklas.cassel@wdc.com/
Link: https://lore.kernel.org/r/20230511011356.227789-1-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce the command duration limits helper function sd_cdl_dld() to set
the DLD bits of READ/WRITE 16 and READ/WRITE 32 commands to indicate to the
device the command duration limit descriptor to apply to the commands.
When command duration limits are enabled, sd_cdl_dld() obtains the index of
the descriptor to apply to the command using the hints field of the request
IO priority value (hints IOPRIO_HINT_DEV_DURATION_LIMIT_1 to
IOPRIO_HINT_DEV_DURATION_LIMIT_7).
If command duration limits is disabled (which is the default), the limit
index "0" is always used to indicate "no limit" for a command.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-11-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The REPORT_SUPPORTED_OPERATION_CODES command allows checking for support of
commands that have the same opcode but different service actions, such as
READ 32 and WRITE 32. However, the current implementation of
scsi_report_opcode() only allows checking an operation code without a
service action differentiation.
Add the "sa" argument to scsi_report_opcode() to allow passing a service
action. If a non-zero service action is specified, the reporting options
field value is set to 3 to have the service action field taken into account
by the device. If no service action field is specified (zero), the
reporting options field is set to 1 as before.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-8-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow scsi_mode_sense() to retrieve sub-pages of mode pages by adding the
subpage argument. Change all the current caller sites to specify the
subpage 0.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-7-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie <michael.christie@oracle.com> says:
The patches in this thread allow us to use the block pr_ops with LIO's
target_core_iblock module to support cluster applications in VMs. They
were built over Linus's tree. They also apply over linux-next and
Martin's tree and Jens's trees.
Currently, to use windows clustering or linux clustering (pacemaker +
cluster labs scsi fence agents) in VMs with LIO and vhost-scsi, you
have to use tcmu or pscsi or use a cluster aware FS/framework for the
LIO pr file. Setting up a cluster FS/framework is pain and waste when
your real backend device is already a distributed device, and pscsi
and tcmu are nice for specific use cases, but iblock gives you the
best performance and allows you to use stacked devices like
dm-multipath. So these patches allow iblock to work like pscsi/tcmu
where they can pass a PR command to the backend module. And then
iblock will use the pr_ops to pass the PR command to the real devices
similar to what we do for unmap today.
The patches are separated in the following groups:
Patch 1 - 2:
- Add block layer callouts for reading reservations and rename reservation
error code.
Patch 3 - 5:
- SCSI support for new callouts.
Patch 6:
- DM support for new callouts.
Patch 7 - 13:
- NVMe support for new callouts.
Patch 14 - 18:
- LIO support for new callouts.
This patchset has been tested with the libiscsi PGR ops and with
window's failover cluster verification test. Note that for scsi
backend devices we need this patchset:
https://lore.kernel.org/linux-scsi/20230123221046.125483-1-michael.christie@oracle.com/T/#m4834a643ffb5bac2529d65d40906d3cfbdd9b1b7
to handle UAs. To reduce the size of this patchset that's being done
separately to make reviewing easier. And to make merging easier this
patchset and the one above do not have any conflicts so can be merged
in different trees.
Link: https://lore.kernel.org/r/20230407200551.12660-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This adds support in sd.c for the block PR read keys and read reservation
callouts, so upper layers like LIO can get the PR info that's been setup
using the existing pr callouts and return it to initiators.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230407200551.12660-6-michael.christie@oracle.com
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
LIO is going to want to do the same block to/from SCSI pr types as sd.c
so this moves the sd_pr_type helper to scsi_common and renames it. The
next patch will then also add a helper to go from the SCSI value to the
block one for use with PERSISTENT_RESERVE_IN commands.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230407200551.12660-5-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename sd_pr_command to sd_pr_out_command to match a
sd_pr_in_command helper added in the next patches.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230407200551.12660-4-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to manually set the owner of a struct class, as the
registering function does it automatically, so remove all of the
explicit settings from various drivers that did so as it is unneeded.
This allows us to remove this pointer entirely from this structure going
forward.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313181843.1207845-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the sd driver revalidates host-managed SMR disks, it calls
disk_set_zoned() which changes the zone_write_granularity attribute value
to the logical block size regardless of the device type. After that, the sd
driver overwrites the value in sd_zbc_read_zone() with the physical block
size, since ZBC/ZAC requires this for host-managed disks. Between the calls
to disk_set_zoned() and sd_zbc_read_zone(), there exists a window where the
attribute shows the logical block size as the zone_write_granularity value,
which is wrong for host-managed disks. The duration of the window is from
20ms to 200ms, depending on report zone command execution time.
To avoid the wrong zone_write_granularity value between disk_set_zoned()
and sd_zbc_read_zone(), modify the value not in sd_zbc_read_zone() but
just after disk_set_zoned() call.
Fixes: a805a4fa4f ("block: introduce zone_write_granularity limit")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20230306063024.3376959-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates that missed the first pull, mostly because of needing more
soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug
fixes), an enclosure services (ses) update (mostly bug fixes) and
other minor bug fixes and changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZAJf2SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWYeAP9u6umX
5Trq6mtfdPyhSxIhgD6AwJDgVkeApSKAHZRu0AD/dfMTQmeaJory4LD4JW+uAgVl
yFPVz9VPlKTiaM2lwUI=
=BKzr
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Updates that missed the first pull, mostly because of needing more
soak time.
Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an
enclosure services (ses) update (mostly bug fixes) and other minor bug
fixes and changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: zfcp: Trace when request remove fails after qdio send fails
scsi: zfcp: Change the type of all fsf request id fields and variables to u64
scsi: zfcp: Make the type for accessing request hashtable buckets size_t
scsi: ufs: core: Simplify ufshcd_execute_start_stop()
scsi: ufs: core: Rely on the block layer for setting RQF_PM
scsi: core: Extend struct scsi_exec_args
scsi: lpfc: Fix double word in comments
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
scsi: core: Fix a source code comment
scsi: cxgbi: Remove unneeded version.h include
scsi: qedi: Remove unneeded version.h include
scsi: mpi3mr: Remove unneeded version.h include
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
scsi: mpi3mr: Use number of bits to manage bitmap sizes
scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
scsi: mpi3mr: Fix an issue found by KASAN
scsi: mpi3mr: Replace 1-element array with flex-array
scsi: ipr: Work around fortify-string warning
scsi: ipr: Make ipr_probe_ioa_part2() return void
...
Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major
core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY/Z7BSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfF9AP9HzZaZ
0XumuxjchcJHRntcIAzb9kE62SSWFxBrgZQCtAEAyhAO1zK284esgCa+arkzEC7p
uhxpufQSGnYvbasStsU=
=VsH1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas).
The major core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits)
scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
scsi: ufs: core: Fix device management cmd timeout flow
scsi: aic94xx: Add missing check for dma_map_single()
scsi: smartpqi: Replace one-element array with flexible-array member
scsi: mpt3sas: Fix a memory leak
scsi: qla2xxx: Remove the unused variable wwn
scsi: ufs: core: Fix kernel-doc syntax
scsi: ufs: core: Add hibernation callbacks
scsi: snic: Fix memory leak with using debugfs_lookup()
scsi: ufs: core: Limit DMA alignment check
scsi: Documentation: Correct spelling
scsi: Documentation: Correct spelling
scsi: target: Documentation: Correct spelling
scsi: aacraid: Allocate cmd_priv with scsicmd
scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
scsi: ufs: core: Enable DMA clustering
scsi: ufs: exynos: Fix the maximum segment size
scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
...
If a controller has DIX is enabled and an attached disk is formatted using
a protection type supported by the controller, a block integrity profile is
registered to enable protected transfers.
If the disk is subsequently reformatted to disable PI, and the controller
does not support DIX Type 0, this can lead to failures such as this:
[142829.032340] hisi_sas_v3_hw 0000:b4:04.0: erroneous completion iptt=2375 task=00000000bea0970c dev id=5 direct-attached phy4 addr=51c20dbaf642a000 CQ hdr: 0x1023 0x50947 0x0 0x20000 Error info: 0x0 0x0 0x4 0x0
[142829.073883] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
[142829.079783] sas: sas_scsi_find_task: aborting task 0x00000000bea0970c
[142829.102342] sas: Internal abort: task to dev 51c20dbaf642a000 response: 0x0 status 0x5
[142829.110319] sas: sas_eh_handle_sas_errors: task 0x00000000bea0970c is done
[142829.117275] sd 7:0:5:0: [sdc] tag#2375 UNKNOWN(0x2003) Result: hostbyte=0x05 driverbyte=DRIVER_OK cmd_age=0s
[142829.127171] sd 7:0:5:0: [sdc] tag#2375 CDB: opcode=0x2a 2a 00 00 00 00 00 00 00 08 00
[142829.135059] I/O error, dev sdc, sector 0 op 0x1:(WRITE) flags 0x18800 phys_seg 1 prio class 2
This is because the block layer integrity profile is currently only set up
the first time a disk is discovered.
To address this, remove the first_scan check when configuring protection
information during revalidate. Also unregister the block integrity profile
if DIX is not supported with a given protection type.
[mkp: commit description + printk dedup]
Link: https://lore.kernel.org/r/20230221081026.24736-1-yangxingui@huawei.com
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit ce70fd9a55 ("scsi: core: Remove the cmd field from struct
scsi_request") sd_cdb_cache is unused. Remove it.
Link: https://lore.kernel.org/r/20230221115340.21201-1-changfengnan@bytedance.com
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a helper for setting up the special_bvec instead of open coding it
in three place, and use the new bvec_set_page helper to initialize
special_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
scsi_execute*() is going to be removed. Convert sd_mod to use
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This converts the SCSI errors we commonly see during PR handling to PR_STS
errors or -Exyz errors. pr_ops callers can then handle SCSI and NVMe errors
without knowing the device types.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20221122032603.32766-4-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ZBC Zoned Block Commands specification mandates SYNCHRONIZE CACHE(16) for
host-managed zoned block devices, but does not mandate SYNCHRONIZE
CACHE(10). Call SYNCHRONIZE CACHE(16) in place of SYNCHRONIZE CACHE(10) to
ensure that the command is always supported. For this purpose, add
use_16_for_sync flag to struct scsi_device in same manner as use_16_for_rw
flag.
To be precise, ZBC does not mandate SYNCHRONIZE CACHE(16) for host-aware
zoned block devices. However, modern devices should support 16-byte
commands. Hence, call SYNCHRONIZE CACHE (16) on both types of ZBC devices,
host-aware and host-managed. Of note is that READ(16) and WRITE(16) have
same story and they are already called for both types of ZBC devices.
Another note is that this patch depends on the fix commit ea045fd344
("ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure").
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20221115002905.1709006-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@opendource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although commit 88f1669019 ("scsi: sd: Rework asynchronous resume support")
eliminates a delay for some ATA disks after resume, it causes resume of ATA
disks to fail on other setups. See also:
* "Resume process hangs for 5-6 seconds starting sometime in 5.16"
(https://bugzilla.kernel.org/show_bug.cgi?id=215880).
* Geert's regression report
(https://lore.kernel.org/linux-scsi/alpine.DEB.2.22.394.2207191125130.1006766@ramsan.of.borg/).
This is what I understand about this issue:
* During resume, ata_port_pm_resume() starts the SCSI error handler. This
changes the SCSI host state into SHOST_RECOVERY and causes
scsi_queue_rq() to return BLK_STS_RESOURCE.
* sd_resume() calls sd_start_stop_device() for ATA devices. That function
in turn calls sd_submit_start() which tries to submit a START STOP UNIT
command. That command can only be submitted after the SCSI error handler
has changed the SCSI host state back to SHOST_RUNNING.
* The SCSI error handler runs on its own thread and calls
schedule_work(&(ap->scsi_rescan_task)). That causes
ata_scsi_dev_rescan() to be called from the context of a kernel
workqueue. That call hangs in blk_mq_get_tag(). I'm not sure why - maybe
because all available tags have been allocated by sd_submit_start()
calls (this is a guess).
Link: https://lore.kernel.org/r/20220816172638.538734-1-bvanassche@acm.org
Fixes: 88f1669019 ("scsi: sd: Rework asynchronous resume support")
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: gzhqyz@gmail.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: gzhqyz@gmail.com
Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: John Garry <john.garry@huawei.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy,
Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
-----BEGIN PGP SIGNATURE-----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=Bv19
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr). The main driver change that might cause issues on down the
road is the conversion of some of our oldest surviving drivers to the
DMA API (should only affect m68k). The only major core change is the
rework of async resume; the rest are either completely trivial or for
updating deprecated APIs.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYuvakyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfvOAP4m0N6b
e3JwoBtB1c0JMKv6G4gka8suEG8p5f4khDu8wwD+LfGUCzG49Y5Ts7rByXfEiGgO
krSdwsAZiV6yKg/HuPw=
=Ak9L
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
Add a comment about limiting the default the SCSI disk request_queue
max_sectors initial value to that of the SCSI host optimal sectors limit.
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. This is because the
IOMMU IOVA code allocates and free an IOVA for each mapping, which may
affect performance.
New member Scsi_Host.opt_sectors is added, which is the optimal host
max_sectors, and use this value to cap the request queue max_sectors when
set.
It could be considered to have request queues io_opt value initially
set at Scsi_Host.opt_sectors in __scsi_init_queue(), but that is not
really the purpose of io_opt.
Finally, even though Scsi_Host.opt_sectors value should never be greater
than the request queue max_hw_sectors value, continue to limit to this
value for safety.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For some technologies, e.g. an ATA bus, resuming can take multiple
seconds. Waiting for resume to finish can cause a very noticeable delay.
Hence this commit that restores the behavior from before "scsi: core: pm:
Rely on the device driver core for async power management" for most SCSI
devices.
This commit introduces a behavior change: if the START command fails, do
not consider this as a SCSI disk resume failure.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215880
Link: https://lore.kernel.org/r/20220630195703.10155-3-bvanassche@acm.org
Fixes: a19a93e4c6 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: ericspero@icloud.com
Cc: jason600.groome@gmail.com
Tested-by: jason600.groome@gmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for storing the zone related field in struct gendisk instead
of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixing the interpretation of the length of the B9h VPD page (Concurrent
Positioning Ranges). Adding 4 is necessary as the first 4 bytes of the page
is the header with page number and length information. Adding 3 was likely
a misinterpretation of the SBC-5 specification which sets all offsets
starting at zero.
This fixes the error in dmesg:
[ 9.014456] sd 1:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page
Link: https://lore.kernel.org/r/20220602225113.10218-4-tyler.erickson@seagate.com
Fixes: e815d36548 ("scsi: sd: add concurrent positioning ranges support")
Cc: stable@vger.kernel.org
Tested-by: Michael English <michael.english@seagate.com>
Reviewed-by: Muhammad Ahmad <muhammad.ahmad@seagate.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tyler Erickson <tyler.erickson@seagate.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mostly small bug fixes plus other trivial updates. The major change
of note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYptvayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishb1rAPwJWSl1
kB9Qt1xPa1JK0Z7To2LRkrQ4uxYbAnpTLEP6UgEA3YuBccXRppcYQe5CXCrcZryz
BtTbtI3ApiV40xC/SRk=
=Uit3
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
Make sure to always free a scsi disk zone information, even for regular
disks. This ensures that there is no memory leak, even in the case of a
zoned disk changing type to a regular disk (e.g. with a reformat using the
FORMAT WITH PRESET command or other vendor proprietary command).
To do this, rename sd_zbc_clear_zone_info() to sd_zbc_free_zone_info() and
remove sd_zbc_release_disk(). A call to sd_zbc_free_zone_info() is added to
sd_zbc_read_zones() for drives for which sd_is_zoned() returns
false. Furthermore, sd_zbc_free_zone_info() code make s sure that the sdkp
rev_mutex is never used while not being initialized by gating the cleanup
code with a a check on the zone_wp_update_buf field as it is never NULL
when rev_mutex has been initialized.
Link: https://lore.kernel.org/r/20220601062544.905141-3-damien.lemoal@opensource.wdc.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If sd_probe() sees an early error before sdkp->device is initialized,
sd_zbc_release_disk() is called. This causes a NULL pointer dereference
when sd_is_zoned() is called inside that function. Avoid this by removing
the call to sd_zbc_release_disk() in sd_probe() error path.
This change is safe and does not result in zone information memory leakage
because the zone information for a zoned disk is allocated only when
sd_revalidate_disk() is called, at which point sdkp->disk_dev is fully set,
resulting in sd_disk_release() being called when needed to cleanup a disk
zone information using sd_zbc_release_disk().
Link: https://lore.kernel.org/r/20220601062544.905141-2-damien.lemoal@opensource.wdc.com
Fixes: 89d9475610 ("sd: Implement support for ZBC devices")
Reported-by: Dongliang Mu <mudongliangabcd@gmail.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of a small set of driver updates (lpfc, ufs,
mpt3sas mpi3mr, iscsi target). Apart from that this is mostly small
fixes with very few core changes (the biggest one being VPD caching.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYo2WnyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfEiAP4zvniL
xidsiCXGQ4pWF4QW3UxukXpGh5xFREhNCYT9+QEA+DyilCALOI+ZT5GKu2V6gkby
R29ve48/NAWl3fwYjMQ=
=GPL1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of a small set of driver updates (lpfc, ufs, mpt3sas
mpi3mr, iscsi target). Apart from that this is mostly small fixes with
very few core changes (the biggest one being VPD caching)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
scsi: elx: efct: Remove NULL check after calling container_of()
scsi: dpt_i2o: Drop redundant spinlock initialization
scsi: qedf: Remove redundant variable op
scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
scsi: fnic: Replace DMA mask of 64 bits with 47 bits
scsi: mpi3mr: Add target device related sysfs attributes
scsi: mpi3mr: Add shost related sysfs attributes
scsi: elx: efct: Remove redundant memset() statement
scsi: megaraid_sas: Remove redundant memset() statement
scsi: mpi3mr: Return error if dma_alloc_coherent() fails
scsi: hisi_sas: Fix rescan after deleting a disk
scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
scsi: libsas: Refactor sas_ata_hard_reset()
scsi: mpt3sas: Update driver version to 42.100.00.00
scsi: mpt3sas: Fix junk chars displayed while printing ChipName
scsi: ipr: Use kobj_to_dev()
scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
...
In SCSI the midlayer has ownership of the request_queue, so on probe
failure we must only put the gendisk, but leave the request_queue alone.
Link: https://lore.kernel.org/r/20220523083813.227935-1-hch@lst.de
Fixes: 03252259e1 ("scsi: sd: Clean up gendisk if device_add_disk() failed")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During device discovery we ended up calling revalidate twice and thus
requested the same parameters multiple times. This was originally necessary
due to the request_queue and gendisk needing to be instantiated to
configure the block integrity profile.
Since this dependency no longer exists, reorganize the integrity probing
code so it can be run once at the end of discovery and drop the superfluous
revalidate call. Postponing the registration step involves splitting
sd_read_protection() into two functions, one to read the device protection
type and one to configure the mode of operation.
As part of this cleanup, make the printing code a bit less verbose.
Link: https://lore.kernel.org/r/20220302053559.32147-14-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit a83da8a450 ("scsi: sd: Optimal I/O size should be a multiple of
physical block size") validated the reported optimal I/O size against the
physical block size to overcome problems with devices reporting nonsensical
transfer sizes.
However, some devices claim conformity to older SCSI versions that predate
the physical block size being reported. Other devices do not report a
physical block size at all. We need to be able to validate the optimal I/O
size on those devices as well.
Many devices report an OPTIMAL TRANSFER LENGTH GRANULARITY in the same VPD
page as the OPTIMAL TRANSFER LENGTH. Use this value to validate the optimal
I/O size. Also check that the reported granularity is a multiple of the
physical block size, if supported.
Link: https://lore.kernel.org/r/33fb522e-4f61-1b76-914f-c9e6a3553c9b@gmail.com
Link: https://lore.kernel.org/r/20220302053559.32147-9-martin.petersen@oracle.com
Reported-by: Bernhard Sulzer <micraft.b@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the VPD pages already provided by the SCSI midlayer. No need to request
them individually in the SCSI disk driver.
Link: https://lore.kernel.org/r/20220302053559.32147-8-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the ATA Information VPD is now cached at device discovery time it is
no longer necessary to request this page when we configure WRITE SAME.
Instead use the cached information to determine if this disk sits behind a
SCSI-ATA translation layer.
Link: https://lore.kernel.org/r/20220302053559.32147-7-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As such it should be called inside the scsi_device_supports_vpd()
conditional.
Link: https://lore.kernel.org/r/20220302053559.32147-13-martin.petersen@oracle.com
Fixes: e815d36548 ("scsi: sd: add concurrent positioning ranges support")
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
Ec1HDuUCE18H1H2QAh0=
=/Ty9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
Implement the ->free_disk method to to put struct scsi_disk when the last
gendisk reference count goes away. This removes the need to clear
->private_data and thus freeze the queue on unbind.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220308055200.735835-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call free_opal_dev from scsi_disk_release as the opal_dev field is accessed
from the ioctl handler, which isn't synchronized vs sd_release and thus
can be accessed during or after sd_release was called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220308055200.735835-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sd_zbc_release_disk accesses disk->device, so ensure that actually still has
a valid reference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220308055200.735835-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dev is very hard to grep for. Give the field a more descriptive name and
documents its purpose.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220308055200.735835-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Requiring every ULP to have the scsi_drive as first member of the
private data is rather fragile and not necessary anyway. Just use
the driver hanging off the SCSI device instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220308055200.735835-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kernel messages produced during runtime PM can cause a never-ending cycle
because user space utilities (e.g. journald or rsyslog) write the messages
back to storage, causing runtime resume, more messages, and so on.
Messages that tell of things that are expected to happen are arguably
unnecessary, so add a flag to suppress them. This flag is used by the UFS
driver.
Link: https://lore.kernel.org/r/20220228113652.970857-2-adrian.hunter@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that each scsi_request is backed by a scsi_cmnd, there is no need to
indirect the CDB storage. Change all submitters of SCSI passthrough
requests to store the CDB information directly in the scsi_cmnd, and while
doing so allocate the full 32 bytes that cover all Linux supported SCSI
hosts instead of requiring dynamic allocation for > 16 byte CDBs. On
64-bit systems this does not change the size of the scsi_cmnd at all, while
on 32-bit systems it slightly increases it for now, but that increase will
be made up by the removal of the remaining scsi_request fields.
Link: https://lore.kernel.org/r/20220224175552.988286-4-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.
Link: https://lore.kernel.org/r/20220209082828.2629273-5-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYetVgSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfElAQD/OZPx
dceTIXQixYGuHhGI3Il8O5ASYQVIU86gv+jRrgEA/MN4EWj4VsYaocrUdtTCBON1
wJYcC7VUekfNBX6KdeY=
=DcbH
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: nsp_cs: Check of ioremap return value
scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()
scsi: ufs: Modify Tactive time setting conditions
scsi: efct: Remove useless DMA-32 fallback configuration
scsi: message: fusion: mptctl: Use dma_alloc_coherent()
scsi: message: fusion: mptsas: Use dma_alloc_coherent()
scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
scsi: message: fusion: mptbase: Use dma_alloc_coherent()
scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory()
scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
scsi: megaraid: Avoid mismatched storage type sizes
scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
scsi: aic79xx: Remove redundant error variable
scsi: pm80xx: Port reset timeout error handling correction
scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
scsi: mpi3mr: Fix some spelling mistakes
scsi: mpt3sas: Update persistent trigger pages from sysfs interface
scsi: core: Fix scsi_mode_select() interface
scsi: aacraid: Fix spelling of "its"
scsi: qedf: Fix potential dereference of NULL pointer
This series consists of the usual driver updates (ufs, pm80xx, lpfc,
mpi3mr, mpt3sas, hisi_sas, libsas) and minor updates and bug fixes.
The most impactful change is likely the switch from GFP_DMA to
GFP_KERNEL in a bunch of drivers, but even that shouldn't affect too
many people.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYeCJZyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfMnAQCsERG9
V4yX8LDpBjD7leIccf+6krJNNWaIWYYkEdxpzQD9FShB7/yDakFq3erW2y5mVqac
dZ065M0ckE4bxk9uMIE=
=gPHF
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, pm80xx, lpfc,
mpi3mr, mpt3sas, hisi_sas, libsas) and minor updates and bug fixes.
The most impactful change is likely the switch from GFP_DMA to
GFP_KERNEL in a bunch of drivers, but even that shouldn't affect too
many people"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (121 commits)
scsi: mpi3mr: Bump driver version to 8.0.0.61.0
scsi: mpi3mr: Fixes around reply request queues
scsi: mpi3mr: Enhanced Task Management Support Reply handling
scsi: mpi3mr: Use TM response codes from MPI3 headers
scsi: mpi3mr: Add io_uring interface support in I/O-polled mode
scsi: mpi3mr: Print cable mngnt and temp threshold events
scsi: mpi3mr: Support Prepare for Reset event
scsi: mpi3mr: Add Event acknowledgment logic
scsi: mpi3mr: Gracefully handle online FW update operation
scsi: mpi3mr: Detect async reset that occurred in firmware
scsi: mpi3mr: Add IOC reinit function
scsi: mpi3mr: Handle offline FW activation in graceful manner
scsi: mpi3mr: Code refactor of IOC init - part2
scsi: mpi3mr: Code refactor of IOC init - part1
scsi: mpi3mr: Fault IOC when internal command gets timeout
scsi: mpi3mr: Display IOC firmware package version
scsi: mpi3mr: Handle unaligned PLL in unmap cmnds
scsi: mpi3mr: Increase internal cmnds timeout to 60s
scsi: mpi3mr: Do access status validation before adding devices
scsi: mpi3mr: Add support for PCIe Managed Switch SES device
...
The modepage argument is unused. Remove it.
Link: https://lore.kernel.org/r/20210929091744.706003-3-damien.lemoal@wdc.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove this include directive from code that does not use any functionality
from kernel/async.c.
Link: https://lore.kernel.org/r/20211129194609.3466071-13-bvanassche@acm.org
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that blk_execute_rq does not take a gendisk argument there is no need
to pass it through the scsi_ioctl callchain either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use the disk attached to the request_queue instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.
So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes. Notable core changes are the removal of scsi->tag which caused
some churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
RG8vBdpxMudlvxAPi/A=
=BSFz
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
-----BEGIN PGP SIGNATURE-----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=dLYJ
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block
Pull QUEUE_FLAG_SCSI_PASSTHROUGH removal from Jens Axboe:
"This contains a series leading to the removal of the
QUEUE_FLAG_SCSI_PASSTHROUGH queue flag"
* tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block:
block: remove blk_{get,put}_request
block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
block: remove the initialize_rq_fn blk_mq_ops method
scsi: add a scsi_alloc_request helper
bsg-lib: initialize the bsg_job in bsg_transport_sg_io_fn
nfsd/blocklayout: use ->get_unique_id instead of sending SCSI commands
sd: implement ->get_unique_id
block: add a ->get_unique_id method
-----BEGIN PGP SIGNATURE-----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=w6Kz
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/scsi-ma-2021-10-29' of git://git.kernel.dk/linux-block
Pull SCSI multi-actuator support from Jens Axboe:
"This adds SCSI support for the recently merged block multi-actuator
support. Since this was sitting on top of the block tree, the SCSI
side asked me to queue it up."
* tag 'for-5.16/scsi-ma-2021-10-29' of git://git.kernel.dk/linux-block:
doc: Fix typo in request queue sysfs documentation
doc: document sysfs queue/independent_access_ranges attributes
libata: support concurrent positioning ranges log
scsi: sd: add concurrent positioning ranges support
-----BEGIN PGP SIGNATURE-----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=QWC+
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
Add the sd_read_cpr() function to the sd scsi disk driver to discover
if a device has multiple concurrent positioning ranges (i.e. multiple
actuators on an HDD). The existence of VPD page B9h indicates if a
device has multiple concurrent positioning ranges. The page content
describes each range supported by the device.
sd_read_cpr() is called from sd_revalidate_disk() and uses the block
layer functions disk_alloc_independent_access_ranges() and
disk_set_independent_access_ranges() to represent the set of actuators
of the device as independent access ranges.
The format of the Concurrent Positioning Ranges VPD page B9h is defined
in section 6.6.6 of SBC-5.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the method to query for a uniqueue ID of a given type by looking
it up in the cached device identification VPD page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function returned
void. Now that this is fixed, use the shiny new error handling.
As with the error handling for device_add() we follow the same logic and
just put the device so that cleanup is done via the scsi_disk_release().
Link: https://lore.kernel.org/r/20211015233028.2167651-2-mcgrof@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For SD cardreaders it is extremely common not to have a cache.
Consequently, the following messages do not point to a real error one could
try to fix but rather describe how the disk works:
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
Print these messages as warnings instead of errors.
Link: https://lore.kernel.org/r/20211013075050.3870354-1-martin.kepplinger@puri.sm
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drop various include not actually used in genhd.h itself, and
move the remaning includes closer together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following query shows which drivers define callbacks that are called by
the power management support code in the SCSI core (scsi_pm.c):
$ git grep -nHEwA16 "$(echo $(git grep -h 'scsi_register_driver(&' |
sed 's/.*&//;s/\..*//') | sed 's/ /|/g')" |
grep '\.pm[[:blank:]]*=[[:blank:]]'
drivers/scsi/sd.c-620- .pm = &sd_pm_ops,
drivers/scsi/sr.c-100- .pm = &sr_pm_ops,
drivers/scsi/ufs/ufshcd.c-9765- .pm = &ufshcd_wl_pm_ops,
Since unconditionally runtime resuming a device during system resume is not
necessary, remove that code. Modify the SCSI disk (sd) driver such that it
follows the same approach as the UFS driver, namely to skip system suspend
and resume for devices that are runtime suspended. The CD-ROM code does not
need to be updated since its PM callbacks do not affect the device power
state.
This patch has been tested as follows:
[ shell 1 ]
cd /sys/kernel/debug/tracing
grep -E 'blk_(pre|post)_runtime|runtime_(suspend|resume)|autosuspend_delay|pm_runtime_(get|put)' available_filter_functions |
while read a b; do echo "$a"; done |
grep -v __pm_runtime_resume >set_ftrace_filter
echo function > current_tracer
echo 1 > tracing_on
cat trace_pipe
[ shell 2 ]
cd /sys/block/sr0
# Increase the event poll interval to make it easier to derive from the
# tracing output whether runtime power actions are the result of sg_inq.
echo 30000 > events_poll_msecs
cd device/power
# Enable runtime power management.
echo auto > control
echo 1000 > autosuspend_delay_ms
sleep 1
# Verify in shell 1 that sr0 has been runtime suspended
sg_inq /dev/sr0
eject /dev/sr0
sg_inq /dev/sr0
# Disable runtime power management.
echo on > control
cd /sys/block/sda/device/power
echo auto > control
echo 1000 > autosuspend_delay_ms
sleep 1
# Verify in shell 1 that sr0 has been runtime suspended
sg_inq /dev/sda
Link: https://lore.kernel.org/r/20211006215453.3318929-4-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Martin Kepplinger <martin.kepplinger@puri.sm>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does not change any functionality but makes the next patch in
this series easier to read.
Link: https://lore.kernel.org/r/20211006215453.3318929-3-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of implementing asynchronous resume support in the SCSI core, rely
on the device driver core for resuming SCSI devices asynchronously.
Instead of only supporting asynchronous resumes, also support asynchronous
suspends.
Link: https://lore.kernel.org/r/20211006215453.3318929-2-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS
conflict reported by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For devices that explicitly asked for MODE SENSE(10) use, make sure that
scsi_mode_sense() is called with a buffer of at least 8 bytes so that the
sense header fits.
Link: https://lore.kernel.org/r/20210820070255.682775-4-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sd_spinup_disk() is a little bit noisy after commit 848ade90ba ("scsi:
sd: Do not exit sd_spinup_disk() quietly"):
scsi 0:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Media removed, stopped polling
sd 0:0:0:0: [sda] Media removed, stopped polling
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: [sda] Media removed, stopped polling
There's not really a benefit in printing the same message multiple
times. Therefore print it only if media_present was previously set.
Link: https://lore.kernel.org/r/a2d0a249-6035-9697-626a-e14ec50ef6ee@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.
Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas). The core change causing the most
churn was replacing the command request field request with a macro,
allowing us to offset map to it and remove the redundant field; the
same was also done for the tag field. The most impactful change is
the final removal of scsi_ioctl, which has been deprecated for over a
decade.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
hC3BUEW8f2LLnujWanQ=
=lC5o
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
Pass in a request_queue and assign disk->queue in __blk_alloc_disk to
ensure struct gendisk always has a valid ->queue pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This was a leftover from the legacy alloc_disk interface. Switch
the scsi ULPs and dasd to set ->minors directly like all other
drivers and remove the argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com> [dasd]
Link: https://lore.kernel.org/r/20210816131910.615153-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most drivers should use and have been converted to use blk_alloc_disk
and blk_mq_alloc_disk. Only the scsi ULPs and dasd still allocate
a disk separately from the request_queue, so don't bother with
convenience macros for something that should not see significant
new users and remove these wrappers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210816131910.615153-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sd_spinup_disk() function logs what is happening. Unfortunately this
output stops if the media was marked as removed in the meantime. Add a
print for this case too.
Link: https://lore.kernel.org/r/CWXP265MB26803209FD08A64222EEEA02C4FD9@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use bvec_virt instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210804095634.460779-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-4-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ensure SCSI ULD only has to call a single ioctl helper. This also adds a
bunch of missing ioctls to the ch driver, and removes the need for a
duplicate implementation of SCSI_IOCTL_SEND_COMMAND command.
Link: https://lore.kernel.org/r/20210724072033.1284840-12-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manually verify that the device is not a partition and the caller has admin
privіleges at the beginning of the sr ioctl method and open code the
trivial check for sd as well.
Link: https://lore.kernel.org/r/20210724072033.1284840-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Just handle the compat case in scsi_ioctl() using in_compat_syscall().
Link: https://lore.kernel.org/r/20210724072033.1284840-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the native and compat ioctl handlers into a single one using
in_compat_syscall(), and also simplify the calling conventions by merging
sd_ioctl_common() into sd_ioctl().
Link: https://lore.kernel.org/r/20210724072033.1284840-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For SD card reader devices that have the BLIST_IGN_MEDIA_CHANGE flag
set, a MEDIUM MAY HAVE CHANGED unit attention is established after
resuming from runtime suspend. Send a REQUEST SENSE to consume the UA.
The "downside" is that for these devices we now rely on users to not
change the medium (SD card) *during* a runtime suspend/resume cycle,
i.e. when not unmounting.
To enable runtime PM for an SD cardreader (device number 0:0:0:0), do:
echo 0 > /sys/module/block/parameters/events_dfl_poll_msecs
echo 1000 > /sys/bus/scsi/devices/0:0:0:0/power/autosuspend_delay_ms
echo auto > /sys/bus/scsi/devices/0:0:0:0/power/control
[mkp: use scsi_device flag instead of poking at BLIST]
Link: https://lore.kernel.org/r/20210704075403.147114-3-martin.kepplinger@puri.sm
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
No need to give up the original sd minor even with this option,
and if we did we'd also need to fix the number of minors for
this configuration to actually work.
Fixes: 7c3f828b52 ("block: refactor device number setup in __device_add_disk")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers. The major core change is a rework
to drop the status byte handling macros and the old bit shifted
definitions and the rest of the updates are minor fixes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYN7I6iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpRAQCkngYZ
35yQrqOxgOk2pfrysE95tHrV1MfJm2U49NFTwAEAuZutEvBUTfBF+sbcJ06r6q7i
H0hkJN/Io7enFs5v3WA=
=zwIa
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
While the disk state has nothing to do with partitions, BLKRRPART is used
to force a full revalidate after things like a disk format for historical
reasons. Restore that behavior.
Link: https://lore.kernel.org/r/20210617115504.1732350-1-hch@lst.de
Fixes: 471bd0af54 ("sd: use bdev_check_media_change")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the per-block device bd_mutex with a per-gendisk open_mutex,
thus simplifying locking wherever we deal with partitions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210525061301.2242282-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver_byte field in the result is now unused, so we can drop the
definitions.
Link: https://lore.kernel.org/r/20210427083046.31620-15-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the check for DRIVER_SENSE with a check for
scsi_status_is_check_condition().
Audit all callsites to ensure the SAM status is set correctly. For
backwards compability move the DRIVER_SENSE definition to sg.h, and update
sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever
SAM_STAT_CHECK_CONDITION is present.
[mkp: fix zeroday srp warning]
Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fix
Return the actual error code in __scsi_execute() (which, according to the
documentation, should have happened anyway). And audit all callers to cope
with negative return values from __scsi_execute() and friends.
[mkp: resolve conflict and return bool]
Link: https://lore.kernel.org/r/20210427083046.31620-7-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The description for scsi_mode_sense() claims to return the number of valid
bytes on success, which is not what the code does. Additionally there is
no gain in returning the SCSI status, as everything the callers do is to
check against scsi_result_is_good(), which is what scsi_mode_sense() does
already. So change the calling convention to return a standard error code
on failure, and 0 on success, and adapt the description and all callers.
Link: https://lore.kernel.org/r/20210427083046.31620-4-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using 'retval' to represent first a SCSI status and later
whether or not a disk change event occurred, introduce a new variable for
the latter purpose.
Link: https://lore.kernel.org/r/20210415220826.29438-17-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/sd.c:1537: warning: expecting prototype for sd_ioctl(). Prototype was for sd_ioctl_common() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-7-lee.jones@linaro.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Drew Eckhardt <drew@colorado.edu>
Cc: Eric Youngdale <eric@andante.org>
Cc: Jirka Hanika <geo@ff.cuni.cz>
Cc: Richard Gooch <rgooch@atnf.csiro.au>
Cc: Torben Mathiasen <tmm@image.dk>
Cc: Alex Davis <letmein@erols.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: willy@debian.org
Cc: Kurt Garloff <garloff@suse.de>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI core has been modified recently such that it only processes PM
requests if rpm_status != RPM_ACTIVE. Since some Opal requests are
submitted while rpm_status != RPM_ACTIVE, set flag RQF_PM for Opal
requests.
See also https://bugzilla.kernel.org/show_bug.cgi?id=211227.
[mkp: updated sha for PM patch]
Link: https://lore.kernel.org/r/20210222021042.3534-1-bvanassche@acm.org
Fixes: d80210f25f ("sd: add support for TCG OPAL self encrypting disks")
Fixes: e6044f714b ("scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE")
Cc: chriscjsus@yahoo.com
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Reported-by: chriscjsus@yahoo.com
Tested-by: chriscjsus@yahoo.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In sd_probe(), print a warning if CONFIG_BLK_DEV_ZONED is disabled and a
TYPE_ZBC device is found. While at it, use IS_ENABLED() to test if
CONFIG_BLK_DEV_ZONED is enabled instead using of a #ifdef.
Link: https://lore.kernel.org/r/20210128055658.530133-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 996e509bbc ("sd: use __register_blkdev to avoid a modprobe for an
unregistered dev_t") removed blk_register_region(devt, ...) in sd_remove()
and since then, devt is unused in sd_remove().
Hence, make W=1 warns:
drivers/scsi/sd.c:3516:8:
warning: variable 'devt' set but not used [-Wunused-but-set-variable]
Simply remove this obsolete variable.
[mkp: fixed commit sha]
Link: https://lore.kernel.org/r/20201214095424.12479-1-lukas.bulwahn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The block layer code will split a large zeroout request into multiple bios
and if WRITE SAME is disabled because the storage device reports that it
does not support it (or support the length used), we can get an error
message from the block layer despite the setting of RQF_QUIET on the first
request. This is because more than one request may have already been
submitted.
Fix this by setting RQF_QUIET when BLK_STS_TARGET is returned to fail the
request early, we don't need to log a message because we did not actually
submit the command to the device, and the block layer code will handle the
error by submitting individual write bios.
Link: https://lore.kernel.org/r/20201207221021.28243-1-emilne@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The update_bdev argument is always set to true, so remove it. Also
rename the function to the slighly less verbose set_capacity_and_notify,
as propagating the disk size to the block device isn't really
revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This avoids the extra call to revalidate_disk_size in sd_rescan and
is otherwise a no-op because the size did not change, or we are in
the probe path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch from using blk_register_region to the probe callback passed to
__register_blkdev to disable the request_module call for an unclaimed
dev_t in the SD majors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed. The other main changes are two
driver updates (arcmsr, pm80xx) and assorted minor clean ups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX5MkQCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRkuAPsEAR/W
NS7J7j66rF2x15xGR2CNB4R6FEBSd/hdOPp7cQEA4rtLKKI53W4oydKsfTux6N6o
MLZJIHM5nTitk++AVQs=
=QgpC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed.
The other main changes are two driver updates (arcmsr, pm80xx) and
assorted minor clean ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: qla2xxx: Fix return of uninitialized value in rval
scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands
scsi: sr: Initialize ->cmd_len
scsi: arcmsr: Update driver version to v1.50.00.02-20200819
scsi: arcmsr: Add support for ARC-1886 series RAID controllers
scsi: arcmsr: Fix device hot-plug monitoring timer stop
scsi: arcmsr: Remove unnecessary syntax
scsi: pm80xx: Driver version update
scsi: pm80xx: Increase the number of outstanding I/O supported to 1024
scsi: pm80xx: Remove DMA memory allocation for ccb and device structures
scsi: pm80xx: Increase number of supported queues
scsi: sym53c8xx_2: Fix sizeof() mismatch
scsi: isci: Fix a typo in a comment
scsi: qla4xxx: Fix inconsistent format argument type
scsi: myrb: Fix inconsistent format argument types
scsi: myrb: Remove redundant assignment to variable timeout
scsi: bfa: Fix error return in bfad_pci_init()
scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup()
scsi: snic: Simplify the return expression of svnic_cq_alloc()
scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc()
...
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug
fixes. There are only three core changes: adding sense codes,
cleaning up noretry and adding an option for limitless retries.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX4YulyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaZDAQCT7rwG
UEZYHgYkU9EX9ERVBQM0SW4mLrxf3g3P5ioJsAEAtkclCM4QsIOP+MIPjIa0EyUY
khu0kcrmeFR2YwA8zhw=
=4w4S
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
-----BEGIN PGP SIGNATURE-----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=LzyE
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
Rename scsi_init_io() to scsi_alloc_sgtables(), and ensure callers call
scsi_free_sgtables() to cleanup failures close to scsi_init_io() instead of
leaking it down the generic I/O submission path.
Link: https://lore.kernel.org/r/20201005084130.143273-9-hch@lst.de
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some iSCSI targets went with the traditional "export N ports" approach and
then allowed the initiator to multipath over them. Other targets went the
opposite direction and export a single port, and then software on the
target side performs load balancing and failover to other targets via an
iSCSI specific feature or IP takover.
The problem for the 2nd type of config is we quickly run out of our five
retries and get I/O errors. In these setups we want to reduce resource use
on the initiator side so we only wanted the one session and no
dm-multipath. To handle traditional multipath operations like failover we
do IP takover on the target side. So we would have an iSCSI target running
on node1. Some monitoring software decides it's dead or the node is
overloaded so it starts the iSCSI target on node2. The problem is for the
failover case where we might have the equivalent of a dm-multipath
temporary all paths down, or we just have to try more than 5 nodes before
finding a good one.
To handle this type of issue allow the user to configure the disk cmd
retries from -1 to the current max of 5. -1 means infinite retries and
should be used for setups where some other setting is going to control when
to fail. For example iSCSI has the replacement/recovery timeout and fc
(some users have used FC with NPIV and done something similar as IP
takover) has dev_loss_tmo/fast_io_fail which will eventually expire and
fail I/O.
Link: https://lore.kernel.org/r/1601566554-26752-3-git-send-email-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make sure to call sd_zbc_init_disk() when the sdkp->zoned field is known,
that is, once sd_read_block_characteristics() is executed in
sd_revalidate_disk(), so that host-aware disks also get initialized. To do
so, move sd_zbc_init_disk() call in sd_zbc_revalidate_zones() and make sure
to execute it for all zoned disks, including for host-aware disks used as
regular disks as these disk zoned model may be changed back to BLK_ZONED_HA
when partitions are deleted.
Link: https://lore.kernel.org/r/20200915073347.832424-3-damien.lemoal@wdc.com
Fixes: 5795eb4430 ("scsi: sd_zbc: emulate ZONE_APPEND commands")
Cc: <stable@vger.kernel.org> # v5.8+
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When CONFIG_BLK_DEV_ZONED is disabled, allow using host-aware ZBC disks as
regular disks. In this case, ensure that command completion is correctly
executed by changing sd_zbc_complete() to return good_bytes instead of 0
and causing a hang during device probe (endless retries).
When CONFIG_BLK_DEV_ZONED is enabled and a host-aware disk is detected to
have partitions, it will be used as a regular disk. In this case, make sure
to not do anything in sd_zbc_revalidate_zones() as that triggers warnings.
Since all these different cases result in subtle settings of the disk queue
zoned model, introduce the block layer helper function
blk_queue_set_zoned() to generically implement setting up the effective
zoned model according to the disk type, the presence of partitions on the
disk and CONFIG_BLK_DEV_ZONED configuration.
Link: https://lore.kernel.org/r/20200915073347.832424-2-damien.lemoal@wdc.com
Fixes: b72053072c ("block: allow partitions on host aware zone devices")
Cc: <stable@vger.kernel.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch to use bdev_check_media_change instead of check_disk_change and
call sd_revalidate_disk manually. As sd also calls sd_revalidate_disk
manually during probe and open, the extra call into ->revalidate_disk
from bdev_disk_changed is not required either, so stop wiring up the
method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of calling revalidate_disk just do the work directly by
calling sd_revalidate_disk, and revalidate_disk_size where needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, for zoned disks, since blk_revalidate_disk_zones() requires the
disk capacity to be set already to operate correctly, zones revalidation
can only be done on the second revalidate scan once the gendisk capacity is
set at the end of the first scan. As a result, if zone revalidation fails,
there is no second chance to recover from the failure and the disk capacity
is changed to 0, with the disk left unusable.
This can be improved by shuffling around code, specifically, by moving the
call to sd_zbc_revalidate_zones() from sd_zbc_read_zones() to the end of
sd_revalidate_disk(), after set_capacity_revalidate_and_notify() is called
to set the gendisk capacity. With this change, if sd_zbc_revalidate_zones()
fails on the first scan, the second scan will call it again to recover, if
possible.
Using the new struct scsi_disk fields rev_nr_zones and rev_zone_blocks,
sd_zbc_revalidate_zones() does actual work only if it detects a change with
the disk zone configuration. This means that for a successful zones
revalidation on the first scan, the second scan will not cause another
heavy full check.
While at it, remove the unecesary "extern" declaration of
sd_zbc_read_zones().
Link: https://lore.kernel.org/r/20200731054928.668547-1-damien.lemoal@wdc.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the kdoc comment of the function sd_ioctl_common() to avoid a compiler
warning when compiling with W=1.
No functional changes.
Link: https://lore.kernel.org/r/20200706123354.452047-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates. There are no major core changes in this
series apart from a refactoring in scsi_lib.c.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXtq5QyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXyGAQCipTWx
7kHKHZBCVTU133bADt3+SstLrAm8PKZEXMnP9wEAzu4QkkW8URxEDRrpu7qk5gbA
9M/KyqvfRtTH7+BSK7M=
=J6aO
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
:This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates.
There are no major core changes in this series apart from a
refactoring in scsi_lib.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
scsi: cxgb3i: Fix some leaks in init_act_open()
scsi: ibmvscsi: Make some functions static
scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
scsi: ufs: Fix WriteBooster flush during runtime suspend
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs-qcom: Fix scheduling while atomic issue
scsi: mpt3sas: Fix reply queue count in non RDPQ mode
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
scsi: vhost: Notify TCM about the maximum sg entries supported per command
scsi: qla2xxx: Remove return value from qla_nvme_ls()
scsi: qla2xxx: Remove an unused function
scsi: iscsi: Register sysfs for iscsi workqueue
scsi: scsi_debug: Parser tables and code interaction
scsi: core: Refactor scsi_mq_setup_tags function
scsi: core: Fix incorrect usage of shost_for_each_device
scsi: qla2xxx: Fix endianness annotations in source files
...
Export through sysfs as a scsi_disk attribute the zoned capabilities of a
disk ("zoned_cap" attribute file). This new attribute indicates in human
readable form (i.e. a string) the zoned block capabilities implemented by
the disk as found in the ZONED field of the disk block device
characteristics VPD page. The possible values are:
- "none": ZONED=00b (not reported), regular disk
- "host-aware": ZONED=01b, host-aware ZBC disk
- "drive-managed": ZONED=10b, drive-managed ZBC disk (regular disk
interface)
For completeness, also add the following value which is detected using the
device type rather than the ZONED field:
- "host-managed": device type = 0x14 (TYPE_ZBC), host-managed ZBC disk
This new sysfs attribute is purely informational and complementary to the
"zoned" device request queue sysfs attribute as it allows applications and
user daemons (e.g. udev) to easily differentiate regular disks from
drive-managed SMR disks without the need for direct access tools such as
provided by sg3utils.
Link: https://lore.kernel.org/r/20200515054856.1408575-1-damien.lemoal@wdc.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print a message indicating that a disk is a drive-managed SMR model when
such drive is found using the ZONED field of the Block Device
Characteristics VPD page (IDENTIFY data on ATA side).
[mkp: typo]
Link: https://lore.kernel.org/r/20200514081953.1252087-1-damien.lemoal@wdc.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Emulate ZONE_APPEND for SCSI disks using a regular WRITE(16) command
with a start LBA set to the target zone write pointer position.
In order to always know the write pointer position of a sequential write
zone, the write pointer of all zones is tracked using an array of 32bits
zone write pointer offset attached to the scsi disk structure. Each
entry of the array indicate a zone write pointer position relative to
the zone start sector. The write pointer offsets are maintained in sync
with the device as follows:
1) the write pointer offset of a zone is reset to 0 when a
REQ_OP_ZONE_RESET command completes.
2) the write pointer offset of a zone is set to the zone size when a
REQ_OP_ZONE_FINISH command completes.
3) the write pointer offset of a zone is incremented by the number of
512B sectors written when a write, write same or a zone append
command completes.
4) the write pointer offset of all zones is reset to 0 when a
REQ_OP_ZONE_RESET_ALL command completes.
Since the block layer does not write lock zones for zone append
commands, to ensure a sequential ordering of the regular write commands
used for the emulation, the target zone of a zone append command is
locked when the function sd_zbc_prepare_zone_append() is called from
sd_setup_read_write_cmnd(). If the zone write lock cannot be obtained
(e.g. a zone append is in-flight or a regular write has already locked
the zone), the zone append command dispatching is delayed by returning
BLK_STS_ZONE_RESOURCE.
To avoid the need for write locking all zones for REQ_OP_ZONE_RESET_ALL
requests, use a spinlock to protect accesses and modifications of the
zone write pointer offsets. This spinlock is initialized from sd_probe()
using the new function sd_zbc_init().
Co-developed-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl6BJCoQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpvziEACqQC+QRKiqR6X5yaPWJ9LqjKE7lfI1PUb7
0a1z1mKuf8d6z0qNleUwdSOEaS5zJiswou2K8GLvEtTQH41QYsQkxc9GLjAyTveK
szAyzZaa3BNUy9hkczm9i2arv3fI8XoTE3JvRM0e9wL8fBJDYCtKtHFJvF4hisOQ
ydaJlU6tcwzd9bdV7K5dLwBxu3AeAJjzS3Tyfw25u9N9O/btUxJ91RTqBb2+Xeoz
AVasfRlAqf/CzdjxCCmDgWE2QM4852pAeQ7UJJBGISNWNoiwkezMg+6HD0jEOLee
bQ8uDyQdihIWTY+/zQasotX8/71uLV8QgtjWLXR9zrjrubIBWHGzoWSQ4kPg5DfQ
bJmKO0VvWN2sshZEpWvzzAFGYxZViNphbK2Pb4hKOcv7jtMcC8mmEogh/7EqbD/n
KB3IM9qVoXM8INm5o0dTy5uDRJxiHiHYkqsZaKz55BB/R4Geym5TINT3nXgxhQrn
JoSwp4zdm3/NJOySruDi2eETqWJC2bsz3FsQSyCQTPOuP0nLtFKBb1UKHpmYTCXG
H4LCyCKFJ6s006qBcdaNPZBw1mrSNwoxEulHnpYA4BFfPeXi72yrnMZQkdwWONpW
LIVuD0hBm8X/pulbvEEdjzXBqZVkqK3xFX+uX5+bnwwaUKddXAC/h9SQKpBP2Mbb
AeZToMklKw==
=6Glq
-----END PGP SIGNATURE-----
Merge tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Online capacity resizing (Balbir)
- Number of hardware queue change fixes (Bart)
- null_blk fault injection addition (Bart)
- Cleanup of queue allocation, unifying the node/no-node API
(Christoph)
- Cleanup of genhd, moving code to where it makes sense (Christoph)
- Cleanup of the partition handling code (Christoph)
- disk stat fixes/improvements (Konstantin)
- BFQ improvements (Paolo)
- Various fixes and improvements
* tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits)
block: return NULL in blk_alloc_queue() on error
block: move bio_map_* to blk-map.c
Revert "blkdev: check for valid request queue before issuing flush"
block: simplify queue allocation
bcache: pass the make_request methods to blk_queue_make_request
null_blk: use blk_mq_init_queue_data
block: add a blk_mq_init_queue_data helper
block: move the ->devnode callback to struct block_device_operations
block: move the part_stat* helpers from genhd.h to a new header
block: move block layer internals out of include/linux/genhd.h
block: move guard_bio_eod to bio.c
block: unexport get_gendisk
block: unexport disk_map_sector_rcu
block: unexport disk_get_part
block: mark part_in_flight and part_in_flight_rw static
block: mark block_depr static
block: factor out requeue handling from dispatch code
block/diskstats: replace time_in_queue with sum of request times
block/diskstats: accumulate all per-cpu counters in one pass
block/diskstats: more accurate approximation of io_ticks for slow disks
...
Some USB bridge devices will return a default set of characteristics during
initialization. And then, once an attached drive has spun up, substitute
the actual parameters reported by the drive. According to the SCSI spec,
the device should return a UNIT ATTENTION in case any reported parameters
change. But in this case the change is made silently after a small window
where default values are reported.
Commit a83da8a450 ("scsi: sd: Optimal I/O size should be a multiple of
physical block size") validated the reported optimal I/O size against the
physical block size to overcome problems with devices reporting nonsensical
transfer sizes. However, this validation did not account for the fact that
aforementioned devices will return default values during a brief window
during spin-up. The subsequent change in reported characteristics would
invalidate the checking that had previously been performed.
Unset a previously configured optimal I/O size should the sanity checking
fail on subsequent revalidate attempts.
Link: https://lore.kernel.org/r/33fb522e-4f61-1b76-914f-c9e6a3553c9b@gmail.com
Cc: Bryan Gurney <bgurney@redhat.com>
Cc: <stable@vger.kernel.org>
Reported-by: Bernhard Sulzer <micraft.b@gmail.com>
Tested-by: Bernhard Sulzer <micraft.b@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
block/genhd provides set_capacity_revalidate_and_notify() for sending RESIZE
notifications via uevents. This notification is newly added to scsi sd.
Signed-off-by: Balbir Singh <sblbir@amazon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There
are a couple of core and base updates around error propagation and
atomicity in the attribute container base we use for the SCSI
transport classes. The rest is minor changes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXjHQJyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZZ8AQC02N+v
iUnTl1YxGPjIWBbnHuUxN2Qbb9D3C6gAT1LkigEArlk163K3A1XEQHF/VNCdAz/f
01XYTd3p1VHuegIBHlk=
=Cn52
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.
There are a couple of core and base updates around error propagation
and atomicity in the attribute container base we use for the SCSI
transport classes.
The rest is minor changes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits)
scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity
scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
scsi: hisi_sas: Replace magic number when handle channel interrupt
scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock
scsi: hisi_sas: use threaded irq to process CQ interrupts
scsi: ufs: Use UFS device indicated maximum LU number
scsi: ufs: Add max_lu_supported in struct ufs_dev_info
scsi: ufs: Delete is_init_prefetch from struct ufs_hba
scsi: ufs: Inline two functions into their callers
scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
scsi: ufs: Split ufshcd_probe_hba() based on its called flow
scsi: ufs: Delete struct ufs_dev_desc
scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
scsi: ufs-mediatek: enable low-power mode for hibern8 state
scsi: ufs: export some functions for vendor usage
scsi: ufs-mediatek: add dbg_register_dump implementation
scsi: qla2xxx: Fix a NULL pointer dereference in an error path
scsi: qla1280: Make checking for 64bit support consistent
scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1
...
-----BEGIN PGP SIGNATURE-----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=TxAC
-----END PGP SIGNATURE-----
Merge tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Unfortunately this weekend we had a few last minute reports, one was
for block.
The partition disable for zoned devices was overly restrictive, it can
work (and be supported) just fine for host-aware variants.
Here's a fix ensuring that's the case so we don't break existing users
of that"
* tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
block: allow partitions on host aware zone devices
Host-aware SMR drives can be used with the commands to explicitly manage
zone state, but they can also be used as normal disks. In the former
case it makes perfect sense to allow partitions on them, in the latter
it does not, just like for host managed devices. Add a check to
add_partition to allow partitions on host aware devices, but give
up any zone management capabilities in that case, which also catches
the previously missed case of adding a partition vs just scanning it.
Because sd can rescan the attribute at runtime it needs to check if
a disk has partitions, for which a new helper is added to genhd.h.
Fixes: 5eac3eb30c ("block: Remove partition support for zoned block devices")
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an attached disk with protection information enabled is reformatted
to Type 0 the revalidation code does not clear the original protection
type and subsequent accesses will keep setting RDPROTECT/WRPROTECT.
Set the protection type to 0 if the disk reports PROT_EN=0 in READ
CAPACITY(16).
[mkp: commit desc]
Fixes: fe542396da ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type")
Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Each driver calling scsi_ioctl() gets an equivalent compat_ioctl()
handler that implements the same commands by calling scsi_compat_ioctl().
The scsi_cmd_ioctl() and scsi_cmd_blk_ioctl() functions are compatible
at this point, so any driver that calls those can do so for both native
and compat mode, with the argument passed through compat_ptr().
With this, we can remove the entries from fs/compat_ioctl.c. The new
code is larger, but should be easier to maintain and keep updated with
newly added commands.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
11 patches, all in drivers (no core changes) that are either minor
cleanups or small fixes. They were late arriving, but still safe for
-rc1.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXeyDEiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbijAQDIuM45
xeEXgWXF8c/tYuvildK1WjyVzwBO2k563lUmYQEA4rxSzkmhtcaMTDuk4hI4Y4TP
p87U1bXNSJ7tCpFU15w=
=W43H
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Eleven patches, all in drivers (no core changes) that are either minor
cleanups or small fixes.
They were late arriving, but still safe for -rc1"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
scsi: megaraid_sas: Make poll_aen_lock static
scsi: sd_zbc: Improve report zones error printout
scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
scsi: qla2xxx: unregister ports after GPN_FT failure
scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
scsi: pm80xx: Remove unused include of linux/version.h
scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
scsi: scsi_transport_sas: Fix memory leak when removing devices
scsi: lpfc: size cpu map by last cpu id set
scsi: ibmvscsi_tgt: Remove unneeded variable rc
This is mostly update of the usual drivers: aacraid, ufs, zfcp,
NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx
plus a whole load of minor updates and fixes. The two major core
changes are Al Viro's reworking of sg's handling of copy to/from user,
Ming Lei's removal of the host busy counter to avoid contention in the
multiqueue case and Damien Le Moal's fixing of residual tracking
across error handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXeKvHCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQJMAQDAjlAi
SNfbyndMqyf+rZGWufDI+43Up1VvW9GeWJHeDwEAxfO5XZsCks2uT8UxXhpEp9L7
HkiUww3zbcgl0FWFkUM=
=cdVU
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: aacraid, ufs, zfcp,
NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx
plus a whole load of minor updates and fixes.
The major core changes are Al Viro's reworking of sg's handling of
copy to/from user, Ming Lei's removal of the host busy counter to
avoid contention in the multiqueue case and Damien Le Moal's fixing of
residual tracking across error handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits)
scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort()
scsi: target: core: Fix a pr_debug() argument
scsi: iscsi: Don't send data to unbound connection
scsi: target: iscsi: Wait for all commands to finish before freeing a session
scsi: target: core: Release SPC-2 reservations when closing a session
scsi: target: core: Document target_cmd_size_check()
scsi: bnx2i: fix potential use after free
Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails"
scsi: NCR5380: Add disconnect_mask module parameter
scsi: NCR5380: Unconditionally clear ICR after do_abort()
scsi: NCR5380: Call scsi_set_resid() on command completion
scsi: scsi_debug: num_tgts must be >= 0
scsi: lpfc: use hdwq assigned cpu for allocation
scsi: arcmsr: fix indentation issues
scsi: qla4xxx: fix double free bug
scsi: pm80xx: Modified the logic to collect fatal dump
scsi: pm80xx: Tie the interrupt name to the module instance
scsi: pm80xx: Controller fatal error through sysfs
scsi: pm80xx: Do not request 12G sas speeds
scsi: pm80xx: Cleanup command when a reset times out
...
As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need support
for time64_t.
In completely unrelated work, I spent time on cleaning up parts of this
file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the rest
of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which is
the scsi ioctl handlers. I have patches for those as well, but they need
more testing or possibly a rewrite.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lgCl
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
In the case of a report zones command failure, instead of simply printing
the host_byte and driver_byte values returned, print a message that is more
human readable and useful, adding sense codes too.
To do so, use the already defined sd_print_sense_hdr() and
sd_print_result() functions by moving the declaration of these functions
into sd.h.
Link: https://lore.kernel.org/r/20191125070518.951717-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
support to allow explicit control of zone states.
Contains contributions from Matias Bjorling, Hans Holmberg,
Keith Busch and Damien Le Moal.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4]
and one core change in sd that fixes an I/O failure on DIF type 3
devices.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXbzO+iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYOpAP9/BCSY
2TAFlli2rVQe+ZNjhHcE4Gj92HNPO7ZgvDQvWgD9F184tjG+1pntYGFutoso7Ak6
QimtBw4AuYg9eDKJDKU=
=bQRX
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi into for-5.5/drivers-post
SCSI fixes on 20191101
Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4]
and one core change in sd that fixes an I/O failure on DIF type 3
devices.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: qla2xxx: stop timer in shutdown path
scsi: sd: define variable dif as unsigned int instead of bool
scsi: target: cxgbit: Fix cxgbit_fw4_ack()
scsi: qla2xxx: Fix partial flash write of MBI
scsi: qla2xxx: Initialized mailbox to prevent driver load failure
scsi: lpfc: Honor module parameter lpfc_use_adisc
scsi: ufs-bsg: Wake the device before sending raw upiu commands
scsi: lpfc: Check queue pointer before use
scsi: qla2xxx: fixup incorrect usage of host_byte
scsi: lpfc: remove left-over BUILD_NVME defines
scsi: core: try to get module before removing device
scsi: hpsa: add missing hunks in reset-patch
scsi: target: core: Do not overwrite CDB byte 1
scsi: ch: Make it possible to open a ch device multiple times again
scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE
scsi: sni_53c710: fix compilation error
scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions
scsi: qla2xxx: fix a potential NULL pointer dereference
scsi: MAINTAINERS: Update qla2xxx driver
scsi: zfcp: fix reaction on bit error threshold notification
...
Variable dif in function sd_setup_read_write_cmnd() is the return value of
function scsi_host_dif_capable() which returns dif capability of disks. If
define it as bool, even for the disks which support DIF3, the function
still return dif=1, which causes IO error. So define variable dif as
unsigned int instead of bool.
Fixes: e249e42d27 ("scsi: sd: Clean up sd_setup_read_write_cmnd()")
Link: https://lore.kernel.org/r/1571725628-132736-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sed_ioctl() function is written to be compatible between
32-bit and 64-bit processes, however compat mode is only
wired up for nvme, not for sd.
Add the missing call to sed_ioctl() in sd_compat_ioctl().
Fixes: d80210f25f ("sd: add support for TCG OPAL self encrypting disks")
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I've got a report about a UAS drive enclosure reporting back Sense: Logical
unit access not authorized if the drive it holds is password protected.
While the drive is obviously unusable in that state as a mass storage
device, it still exists as a sd device and when the system is asked to
perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If
that fails due to password protection, the error must be ignored.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rework from previous work by:
Sujit Reddy Thumma <sthumma@codeaurora.org>
Until now the scsi mid-layer forbids runtime suspend till userspace enables
it. This is mainly to quarantine some disks with broken runtime power
management or have high latencies executing suspend resume callbacks. If
the userspace doesn't enable the runtime suspend the underlying hardware
will be always on even when it is not doing any useful work and thus
wasting power.
Some low-level drivers for the controllers can efficiently use runtime
power management to reduce power consumption and improve battery life.
Allow runtime suspend parameters override within the LLD itself instead of
waiting for userspace to control the power management.
Link: https://lore.kernel.org/r/1568649411-5127-2-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=aAPP
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Some later additions that weren't quite done for the first pull
request, and also a few fixes that have arrived since.
This contains:
- Kill silly pktcdvd warning on attempting to register a non-scsi
passthrough device (me)
- Use symbolic constants for the block t10 protection types, and
switch to handling it in core rather than in the drivers (Max)
- libahci platform missing node put fix (Nishka)
- Small series of fixes for BFQ (Paolo)
- Fix possible nbd crash (Xiubo)"
* tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block:
block: drop device references in bsg_queue_rq()
block: t10-pi: fix -Wswitch warning
pktcdvd: remove warning on attempting to register non-passthrough dev
ata: libahci_platform: Add of_node_put() before loop exit
nbd: fix possible page fault for nbd disk
nbd: rename the runtime flags as NBD_RT_ prefixed
block, bfq: push up injection only after setting service time
block, bfq: increase update frequency of inject limit
block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1
block, bfq: update inject limit only after injection occurred
block: centralize PI remapping logic to the block layer
block: use symbolic constants for t10_pi type
This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi,
lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates.
The only core change this time around is the addition of request
batching for virtio. Since batching requires an additional flag to
use, it should be invisible to the rest of the drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXYQE/yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXs9AP4usPY5
OpMlF6OiKFNeJrCdhCScVghf9uHbc7UA6cP+EgD/bCtRgcDe1ZjOTYWdeTwvwWqA
ltWYonnv6Lg3b1f9yqI=
=jRC/
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi,
lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The
only core change this time around is the addition of request batching
for virtio. Since batching requires an additional flag to use, it
should be invisible to the rest of the drivers"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits)
scsi: hisi_sas: Fix the conflict between device gone and host reset
scsi: hisi_sas: Add BIST support for phy loopback
scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation
scsi: hisi_sas: Remove some unused function arguments
scsi: hisi_sas: Remove redundant work declaration
scsi: hisi_sas: Remove hisi_sas_hw.slot_complete
scsi: hisi_sas: Assign NCQ tag for all NCQ commands
scsi: hisi_sas: Update all the registers after suspend and resume
scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device
scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails
scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled
scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset()
scsi: hisi_sas: add debugfs auto-trigger for internal abort time out
scsi: virtio_scsi: unplug LUNs when events missed
scsi: scsi_dh_rdac: zero cdb in send_mode_select()
scsi: fcoe: fix null-ptr-deref Read in fc_release_transport
scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code
scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code
scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code
scsi: ufs: Use kmemdup in ufshcd_read_string_desc()
...
Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For commands completing with a resid not aligned on the device logical
sector size, also print the command CDB in addition to the current message
to help debug hardware generating such incorrect command completion
information.
Link: https://lore.kernel.org/r/20190828053511.14818-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch implements the zone reset all operation for sd_zbc.c. We add
a new boolean parameter for the sd_zbc_setup_reset_cmd() to indicate
REQ_OP_ZONE_RESET_ALL command setup. Along with that we add support in
the completion path for the zone reset all.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
removal of the osst driver (I heard from Willem privately that he
would like the driver removed because all his test hardware has
failed). Plus number of minor changes, spelling fixes and other
trivia.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTl4yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdcxAQDCJVbd
fPUX76/V1ldupunF97+3DTharxxbst+VnkOnCwD8D4c0KFFFOI9+F36cnMGCPegE
fjy17dQLvsJ4GsidHy8=
=aS5B
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
removal of the osst driver (I heard from Willem privately that he
would like the driver removed because all his test hardware has
failed). Plus number of minor changes, spelling fixes and other
trivia.
The big merge conflict this time around is the SPDX licence tags.
Following discussion on linux-next, we believe our version to be more
accurate than the one in the tree, so the resolution is to take our
version for all the SPDX conflicts"
Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.
In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").
In these cases I picked the new-style one.
In a few cases, the SPDX conversion was actually different, though. As
explained by James above, and in more detail in a pre-pull-request
thread:
"The other problem is actually substantive: In the libsas code Luben
Tuikov originally specified gpl 2.0 only by dint of stating:
* This file is licensed under GPLv2.
In all the libsas files, but then muddied the water by quoting GPLv2
verbatim (which includes the or later than language). So for these
files Christoph did the conversion to v2 only SPDX tags and Thomas
converted to v2 or later tags"
So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.
Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.
Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style. The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
scsi: qla2xxx: on session delete, return nvme cmd
scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
scsi: megaraid_sas: Introduce various Aero performance modes
scsi: megaraid_sas: Use high IOPS queues based on IO workload
scsi: megaraid_sas: Set affinity for high IOPS reply queues
scsi: megaraid_sas: Enable coalescing for high IOPS queues
scsi: megaraid_sas: Add support for High IOPS queues
scsi: megaraid_sas: Add support for MPI toolbox commands
scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
scsi: megaraid_sas: Call disable_irq from process IRQ poll
scsi: megaraid_sas: Remove few debug counters from IO path
...
Make sd_probe() easier to read by inlining sd_probe_part2(). This patch
does not change any functionality.
[mkp: applied by hand]
Cc: Lee Duncan <lduncan@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As explained during the 2018 LSF/MM session about increasing SCSI disk
probing concurrency, the problems with the current probing approach are as
follows:
- The driver core is unaware of asynchronous SCSI LUN probing.
wait_for_device_probe() waits for all asynchronous probes except
asynchronous SCSI disk probes.
- There is unnecessary serialization between sd_probe() and sd_remove().
This can lead to a deadlock.
Hence this patch that modifies the sd driver such that it uses the driver
core framework for asynchronous probing. The async domain and
get_device()/put_device() pairs that became superfluous due to this change
are removed.
This patch does not affect the time needed for loading the scsi_debug
kernel module with parameters delay=0 and max_luns=256.
This patch depends on commit ef0ff68351 ("driver core: Probe devices
asynchronously instead of the driver") that went upstream in kernel version
v5.1-rc1.
Cc: Lee Duncan <lduncan@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is the same set of patches sent in the merge window as the final
pull except that Martin's read only rework is replaced with a simple
revert of the original change that caused the regression. Everything
else is an obvious fix or small cleanup.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXOh2RyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe+mAP9PtAon
IUlSEcJaMhej3VSyjxWYxble0pbCkBYnuH220gEAk7eCISK3xwAdkWYD0wVLLqxo
9t8qgzKbZSPZVRRD8Tk=
=9p0X
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the same set of patches sent in the merge window as the final
pull except that Martin's read only rework is replaced with a simple
revert of the original change that caused the regression.
Everything else is an obvious fix or small cleanup"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Revert "scsi: sd: Keep disk read-only when re-reading partition"
scsi: bnx2fc: fix incorrect cast to u64 on shift operation
scsi: smartpqi: Reporting unhandled SCSI errors
scsi: myrs: Fix uninitialized variable
scsi: lpfc: Update lpfc version to 12.2.0.2
scsi: lpfc: add check for loss of ndlp when sending RRQ
scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show
scsi: lpfc: resolve lockdep warnings
scsi: qedi: remove set but not used variables 'cdev' and 'udev'
scsi: qedi: remove memset/memcpy to nfunc and use func instead
scsi: qla2xxx: Add cleanup for PCI EEH recovery
sd.c is the only sd file missing licensing information. Add a
GPLv2 tag for the default kernel license.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
