Don't populate the read-only arrays on the stack at run time, instead
make them static const. Also reduces overall size.
before:
text data bss dec hex filename
367439 89582 5952 462973 7107d drivers/scsi/scsi_debug.o
after:
text data bss dec hex filename
365847 90702 5952 462501 70ea5 drivers/scsi/scsi_debug.o
(gcc 14.2.0, x86-64)
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250729064930.1659007-1-colin.i.king@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log. Since commit ad67b74d24 ("printk: hash
addresses printed with %p") the regular %p has been improved to avoid
this issue. Furthermore, restricted pointers ("%pK") were never meant to
be used through printk(). They can still unintentionally leak raw
pointers or acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and easier to
reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250611-restricted-pointers-scsi-v1-1-fe31bfbc4910@linutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The default atomic write max length in DEF_ATOMIC_WR_MAX_LENGTH is
excessively large.
For 512B LBS, we would get a 4MB max, but due to block layer atomic write
restrictions this is limited to 512KB.
Reduce DEF_ATOMIC_WR_MAX_LENGTH to a value which would be more realistic
(for a real device supporting atomic writes), 64KB.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250501100241.930071-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Devices of several types can be created for a single host. The module
device type should be used only when the devices are created.
Scsi_scan sets the device type initially to 0xff and sets the correct
type based in Inquiry results. This means that Inquiry must report
sdebug_ptype as long as scsi_device->type is not set (the limit 32
comes from the 5-bit length of the Peripheral Device Type in Inquiry).
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250310155557.2872-5-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
New definitions (struct opcode_info_t) are created for READ(6),
WRITE(6), READ POSITION(10) for tape devices.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250310155557.2872-4-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add mask field devsel to the struct opcode_info_t to enable different
definitions for different device types. Add checking of device mask to
command queuing and reporting of supported opcodes.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250310155557.2872-3-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix two command definitions:
- Flags and service action reversed in SEND DIAGNOSTIC
- ATOMIC WRITE missing opcode
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250310155557.2872-2-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash. The only non-trivial core change
is an addition to unit attention handling to recognize UAs for power
on/reset and new media so the tape driver can use it.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ+RQ2yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe6DAQCdW/21
S1Y6BDlJLQfpWChGv6GIzanC+5sMfylw4d6ULgEA8upOE5L3fC29IY958jXig0o1
uLjxylwYEfVLDf8gwJ0=
=mkM+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
It appears that a typo has made it into the newly added code
drivers/scsi/scsi_debug.c:3035:3: error: variable 'len' is uninitialized when used here [-Werror,-Wuninitialized]
3035 | len += resp_compression_m_pg(ap, pcontrol, target, devip->tape_dce);
| ^~~
Replace the '+=' with the intended '=' here.
Fixes: 568354b24c ("scsi: scsi_debug: Add compression mode page for tapes")
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225095651.2636811-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Function stop_qc_helper() is called while the debug_scsi_cmd lock is held,
and from here we may call cancel_work_sync(), which may sleep.
Sleeping in atomic sections is not allowed.
Hence change the cancel_work_sync() call into a cancel_work() call.
However now it is not possible to know if the work callback is running when
we return. This is relevant for eh_abort_handler handling, as the semantics
of that callback are that success means that we do not keep a reference to
the scsi_cmnd - now this is not possible. So return FAIL when we are unsure
if the callback still running.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
jpg: return FAILED from scsi_debug_abort() when possible callback running
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224115517.495899-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify command handling by moving struct sdebug_defer into the private
SCSI command data instead of allocating it separately. The only functional
change is that aborting a SCSI command now fails and is retried at a later
time if the completion handler can't be cancelled.
See also commit 1107c7b24e ("scsi: scsi_debug: Dynamically allocate
sdebug_queued_cmd").
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224115517.495899-4-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit f1437cd1e5 ("scsi: scsi_debug: Drop sdebug_queue") removed the
'in_use_bm' struct member. Hence remove a reference to that struct member
from the procfs host info file.
Fixes: f1437cd1e5 ("scsi: scsi_debug: Drop sdebug_queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224115517.495899-3-john.g.garry@oracle.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This structure is not used, so delete it.
It was originally intended for supporting checking for atomic writes
overlapping with ongoing reads and writes, but that support never got
added.
SBC-4 r22 section 4.29.3.2 "Performing operations during an atomic write
operation" describes two methods of handling overlapping atomic writes.
Currently the only method supported is for the ongoing read or write to
complete.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224115517.495899-2-john.g.garry@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds support for MEDIUM PARTITION PAGE in MODE SELECT and the
FORMAT MEDIUM command for tapes. After these additions, the virtual tape
can be partitioned containing either one or two partitions. The POFM flag
in the mode page is set, meaning that the FORMAT MEDIUM command must be
used to create the partitioning defined in the mode page.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-8-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Set tape block size, density and compression to default values when the
device is reset (either directly or via target, bus or host reset).
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-7-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for compression mode page. The compression status
is saved and returned. No UA is generated.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-6-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Support for the READ (6) and SPACE (6) commands for tapes based on the
previous write patch is added. The LOCATE (10) command is updated to use
the written data.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-5-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The tape is implemented as fixed number (10 000) of 8-byte units. The
first four bytes of a unit contains the type of the unit (data block,
filemark or end-of-data mark). If the units is a data block, the first four
bytes contain the block length and the remaining four bytes the first bytes
of written data. This allows the user to use tags to see that the read
block is what it was supposed to be.
The tape can contain two partitions. Initially it is formatted as one
partition consisting of all 10 000 units.
This patch adds the WRITE(6) command for tapes and the WRITE FILEMARKS (6)
command. The REWIND command is updated.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-4-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The changes:
- Add READ BLOCK LIMITS (512 - 1048576 bytes)
- Make LOAD send New Media UA (not correct by the standard, but makes
possible to test also this UA)
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-3-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Patch includes the following:
- Enable MODE SENSE/SELECT without actual page (to read/write only the
Block Descriptor)
- Store the density code and block size in the Block Descriptor (only
short version for tapes)
- Fix REWIND not to use the wrong page filling function
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-2-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/c951a5966e134307b8e50afb08e4b742e3f6ad06.1738746904.git.namcao@linutronix.de
It's better to have sdebug_driver_template as const, so update the probe
path to set the shost members directly after allocation and make that
change.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250107153325.1689432-1-john.g.garry@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Skip the reset settle delay during error handling since the scsi_debug
driver doesn't need this delay.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241216184852.2626339-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The only difference between the .sdev_configure() and .slave_configure()
methods is that the former accepts an additional 'limits' argument.
Convert all SCSI drivers that define a .slave_configure() method to
.sdev_configure(). This patch prepares for removing the
.slave_configure() method. No functionality has been changed.
Acked-by: Geoff Levand <geoff@infradead.org> # for ps3rom
Acked-by: Khalid Aziz <khalid@gonehiking.org> # for the BusLogic driver
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.
This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
alignment (dc395x driver and include/linux/libata.h).
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit 771f712ba5 ("scsi: scsi_debug: Fix cmd duration
calculation"), ns_from_boot value is only evaluated in schedule_resp()
for polled requests.
However, ns_from_boot is also required for hrtimer support for when
ndelay is less than INCLUSIVE_TIMING_MAX_NS, so fix up the logic to
decide when to evaluate ns_from_boot.
Fixes: 771f712ba5 ("scsi: scsi_debug: Fix cmd duration calculation")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241202130045.2335194-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Two small fixes, both in drivers (ufs and scsi_debug).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZyH+cSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVdMAQDdOiaS
9DO+ly/Il64wXZqb9WKcVYRIjmz7m7g5xdMgrgEA1yfD6G7GgQ3zvbVPNC7Y9ecr
4O2iR5EGAVb1Y7UaEQU=
=551G
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, both in drivers (ufs and scsi_debug)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix another deadlock during RTC update
scsi: scsi_debug: Fix do_device_access() handling of unexpected SG copy length
If the sg_copy_buffer() call returns less than sdebug_sector_size, then
we drop out of the copy loop. However, we still report that we copied
the full expected amount, which is not proper.
Fix by keeping a running total and return that value.
Fixes: 84f3a3c01d ("scsi: scsi_debug: Atomic write support")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241018101655.4207-1-john.g.garry@oracle.com
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
-----BEGIN PGP SIGNATURE-----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=wVi8
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
Target debugfs entry is removed via async_schedule() which isn't drained
when adding same name target, so failure of "Directory 'target11:0:0' with
parent 'scsi_debug' already present!" can be triggered easily.
Fix it by switching to domain async schedule, and draining it before
adding new target debugfs entry.
Cc: Wenchao Hao <haowenchao2@huawei.com>
Fixes: f084fe52c6 ("scsi: scsi_debug: Add debugfs interface to fail target reset")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Wenchao Hao <haowenchao22@gmail.com>
Link: https://lore.kernel.org/r/20240619013803.3008857-1-ming.lei@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add initial support for atomic writes.
As is standard method, feed device properties via modules param, those
being:
- atomic_max_size_blks
- atomic_alignment_blks
- atomic_granularity_blks
- atomic_max_size_with_boundary_blks
- atomic_max_boundary_blks
These just match sbc4r22 section 6.6.4 - Block limits VPD page.
We just support ATOMIC WRITE (16).
The major change in the driver is how we lock the device for RW accesses.
Currently the driver uses a per-device lock for accessing device metadata
and "media" data (calls to do_device_access()) atomically for the duration
of the whole read/write command.
This should not suit verifying atomic writes. Reason being that currently
all reads/writes are atomic, so using atomic writes does not prove
anything.
Change device access model to basis that regular writes only atomic on a
per-sector basis, while reads and atomic writes are fully atomic.
As mentioned, since accessing metadata and device media is atomic,
continue to have regular writes involving metadata - like discard or PI -
as atomic. We can improve this later.
Currently we only support model where overlapping going reads or writes
wait for current access to complete before commencing an atomic write.
This is described in 4.29.3.2 section of the SBC. However, we simplify,
things and wait for all accesses to complete (when issuing an atomic
write).
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-10-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The vfs has long had a write lifetime hint mechanism that gives the
expected longevity on storage of the data being written. f2fs was the
original consumer of this and used the hint for flash data placement
(mostly to avoid write amplification by placing objects with similar
lifetimes in the same erase block). More recently the SCSI based UFS
(Universal Flash Storage) drivers have wanted to take advantage of
this as well, for the same reasons as f2fs, necessitating plumbing the
write hints through the block layer and then adding it to the SCSI
core. The vfs write_hints pull you've already taken plumbs this as
far as block and this pull request completes the SCSI core enabling
based on a recently agreed reuse of the old write command group
number. The additions to the scsi_debug driver are for emulating this
property so we can run tests on it in the absence of an actual UFS
device.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZf3owyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdaeAQCdEb5j
d7sJiKTpSpgH0znAJ7UTvwUh6UJu/dj47D4qngEA43IULG8+L4GXDHL9mwCfeHC5
PU7UewCEqnRBSBTdiEw=
=9Xr2
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The vfs has long had a write lifetime hint mechanism that gives the
expected longevity on storage of the data being written. f2fs was the
original consumer of this and used the hint for flash data placement
(mostly to avoid write amplification by placing objects with similar
lifetimes in the same erase block).
More recently the SCSI based UFS (Universal Flash Storage) drivers
have wanted to take advantage of this as well, for the same reasons as
f2fs, necessitating plumbing the write hints through the block layer
and then adding it to the SCSI core.
The vfs write_hints already taken plumbs this as far as block and this
completes the SCSI core enabling based on a recently agreed reuse of
the old write command group number. The additions to the scsi_debug
driver are for emulating this property so we can run tests on it in
the absence of an actual UFS device"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Maintain write statistics per group number
scsi: scsi_debug: Implement GET STREAM STATUS
scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page
scsi: scsi_debug: Allocate the MODE SENSE response from the heap
scsi: scsi_debug: Rework subpage code error handling
scsi: scsi_debug: Rework page code error handling
scsi: scsi_debug: Support the block limits extension VPD page
scsi: scsi_debug: Reduce code duplication
scsi: sd: Translate data lifetime information
scsi: scsi_proto: Add structures and constants related to I/O groups and streams
scsi: core: Query the Block Limits Extension VPD page
Track per GROUP NUMBER how many write commands have been processed. Make
this information available in sysfs. Reset these statistics if any data
is written into the sysfs attribute.
Note: SCSI devices should only interpret the information in the GROUP
NUMBER field as a stream identifier if the ST_ENBLE bit has been set to
one. This patch follows a simpler approach: count the number of writes
per GROUP NUMBER whether or not the group number represents a stream
identifier.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-20-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement the GET STREAM STATUS SCSI command. Report that the first
five stream indexes correspond to permanent streams.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-19-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement an IO Advice Hints Grouping mode page with three permanent
streams. A permanent stream is a stream for which the device server does
not allow closing or otherwise modifying the configuration of that
stream. The stream identifier enable (ST_ENBLE) bit specifies whether
the stream identifier may be used in the GROUP NUMBER field of SCSI
WRITE commands.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-18-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make the MODE SENSE response buffer larger and allocate it from the heap.
This patch prepares for adding support for the IO Advice Hints Grouping
mode page.
Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-17-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the subpage code checks into the switch statement to make it easier
to add support for new page code / subpage code combinations.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-16-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of tracking whether or not the page code is valid in a boolean
variable, jump to error handling code if an unsupported page code is
encountered.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-15-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
>From SBC-5 r05:
"Reduced stream control:
a) reduces the maximum number of streams that the device server supports;
and
b) increases the number of write commands that are able to specify a stream
to be written in any write command that contains the GROUP NUMBER field
in its CDB.
If the RSCS bit (see 6.6.5) is set to one, then the device server shall:
a) support per group stream identifier usage as described in 4.32.2;
b) support the IO Advice Hints Grouping mode page (see 6.5.7); and
c) set the MAXIMUM NUMBER OF STREAMS field (see 6.6.5) to a value that is
less than 64.
Device servers that set the RSCS bit to one may support other features
(e.g., permanent streams (see 4.32.4)).
4.32.4 Permanent streams
A permanent stream is a stream for which the device server does not allow
closing or otherwise modifying the configuration of that stream. The PERM
bit (see 5.9.2.3) indicates whether a stream is a permanent stream. If a
STREAM CONTROL command (see 5.32) specifies the closing of a permanent
stream, the device server terminates that command with CHECK CONDITION
status instead of closing the specified stream. A permanent stream is always
an open stream. Device severs should assign the lowest numbered stream
identifiers to permanent streams."
Report that reduced stream control is supported.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-14-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All VPD pages have the page code in byte one. Reduce code duplication by
storing the VPD page code once.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-13-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the driver core can properly handle constant struct bus_type, move
the pseudo_lld_bus variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-scsi-v1-3-6f552fb24f71@marliere.net
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When zones were first added the SCSI and ATA specs, two different
models were supported (in addition to the drive managed one that
is invisible to the host):
- host managed where non-conventional zones there is strict requirement
to write at the write pointer, or else an error is returned
- host aware where a write point is maintained if writes always happen
at it, otherwise it is left in an under-defined state and the
sequential write preferred zones behave like conventional zones
(probably very badly performing ones, though)
Not surprisingly this lukewarm model didn't prove to be very useful and
was finally removed from the ZBC and SBC specs (NVMe never implemented
it). Due to to the easily disappearing write pointer host software
could never rely on the write pointer to actually be useful for say
recovery.
Fortunately only a few HDD prototypes shipped using this model which
never made it to mass production. Drop the support before it is too
late. Note that any such host aware prototype HDD can still be used
with Linux as we'll now treat it as a conventional HDD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Smatch complains that "dentry" is never initialized. These days everyone
initializes all their stack variables to zero so this means that it will
trigger a warning every time this function is run.
Really, debugfs functions are not supposed to be checked for errors in
normal code. For example, if we updated this code to check the correct
variable then it would print a warning if CONFIG_DEBUGFS was disabled. We
don't want that. Just delete the check.
Fixes: f084fe52c6 ("scsi: scsi_debug: Add debugfs interface to fail target reset")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/c602c9ad-5e35-4e18-a47f-87ed956a9ec2@moroto.mountain
Reviewed-by: Wenchao Hao <haowenchao2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are two bug in this code:
1) If count is zero, then it will lead to a NULL dereference. The
kmalloc() will successfully allocate zero bytes and the test for "if
(buf[0] == '-')" will read beyond the end of the zero size buffer and
Oops.
2) The code does not ensure that the user's string is properly NUL
terminated which could lead to a read overflow.
Fixes: a9996d722b ("scsi: scsi_debug: Add interface to manage error injection for a single device")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/7733643d-e102-4581-8d29-769472011c97@moroto.mountain
Reviewed-by: Wenchao Hao <haowenchao2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add new module param "allow_restart" to control scsi_device's allow_restart
flag. This flag determines if EH is triggered after a command completes
with sense_key 0x6, ASC 0x4 and ASCQ 0x2. EH would be triggered if
allow_restart=1 in this condition.
The new param can be used with the error injection capability to test how
commands completing with sense_key 0x6, ASC 0x4 and ASCQ 0x2 are handled.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-11-haowenchao2@huawei.com
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The interface is found at
/sys/kernel/debug/scsi_debug/target<h:c:t>/fail_reset where <h:c:t>
identifies the target to inject errors on. It's a simple bool type
interface which would make this target's reset fail if set to 'Y'.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-10-haowenchao2@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
