Currently when removing a device from cio_ignore list, we trigger a
path-verification for all the subchannels available in the system. This
could lead to path-verification requests on subchannels with an online
device, which could cause unwanted delay. Instead of all the
subchannels, trigger the path-verifications to those without an online
device.
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Fixes: 2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 0b9902c1fc ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.
Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.
Fixes: b41b554c1e ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix topology update on cpu hotplug, so notifiers see expected masks. This bug
was uncovered with SCHED_CORE support.
- Fix stack unwinding so that the correct number of entries are omitted like
expected by common code. This fixes KCSAN selftests.
- Add kmemleak annotation to stack_alloc to avoid false positive kmemleak
warnings.
- Avoid layering violation in common I/O code and don't unregister subchannel
from child-drivers.
- Remove xpram device driver for which no real use case exists since the kernel
is 64 bit only. Also all hypervisors got required support removed in the
meantime, which means the xpram device driver is dead code.
- Fix -ENODEV handling of clp_get_state in our PCI code.
- Enable KFENCE in debug defconfig.
- Cleanup hugetlbfs s390 specific Kconfig dependency.
- Quite a lot of trivial fixes to get rid of "W=1" warnings, and and other
simple cleanups.
-----BEGIN PGP SIGNATURE-----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=fpJz
-----END PGP SIGNATURE-----
Merge tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
"Except for the xpram device driver removal it is all about fixes and
cleanups.
- Fix topology update on cpu hotplug, so notifiers see expected
masks. This bug was uncovered with SCHED_CORE support.
- Fix stack unwinding so that the correct number of entries are
omitted like expected by common code. This fixes KCSAN selftests.
- Add kmemleak annotation to stack_alloc to avoid false positive
kmemleak warnings.
- Avoid layering violation in common I/O code and don't unregister
subchannel from child-drivers.
- Remove xpram device driver for which no real use case exists since
the kernel is 64 bit only. Also all hypervisors got required
support removed in the meantime, which means the xpram device
driver is dead code.
- Fix -ENODEV handling of clp_get_state in our PCI code.
- Enable KFENCE in debug defconfig.
- Cleanup hugetlbfs s390 specific Kconfig dependency.
- Quite a lot of trivial fixes to get rid of "W=1" warnings, and and
other simple cleanups"
* tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
hugetlbfs: s390 is always 64bit
s390/ftrace: remove incorrect __va usage
s390/zcrypt: remove incorrect kernel doc indicators
scsi: zfcp: fix kernel doc comments
s390/sclp: add __nonstring annotation
s390/hmcdrv_ftp: fix kernel doc comment
s390: remove xpram device driver
s390/pci: read clp_list_pci_req only once
s390/pci: fix clp_get_state() handling of -ENODEV
s390/cio: fix kernel doc comment
s390/ctrlchar: fix kernel doc comment
s390/con3270: use proper type for tasklet function
s390/cpum_cf: move array from header to C file
s390/mm: fix kernel doc comments
s390/topology: fix topology information when calling cpu hotplug notifiers
s390/unwind: use current_frame_address() to unwind current task
s390/configs: enable CONFIG_KFENCE in debug_defconfig
s390/entry: make oklabel within CHKSTG macro local
s390: add kmemleak annotation in stack_alloc()
s390/cio: dont unregister subchannel from child-drivers
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching
to support future vendor provided vfio-pci variants (Yishai Hadas,
Max Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first
open, last close, and device sets (Jason Gunthorpe, Max Gurtovoy,
Yishai Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
-----BEGIN PGP SIGNATURE-----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=nzK7
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read
out again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs
in kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by
the router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105)
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JDGD
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
The devices owned by the parent-driver (css) was getting unregistered
from the io-subchannel driver is clearly a layering violation.
Remove the subchannel unregistration from the child-drivers.
This also means, if the device connected to the subchannel is not
operational, or not accessible, the subchannel will not be unregistered.
Instead the CIO layer will allow valid subchannels without any operational
devices in sysfs. And the userspace tooling might need to be modified to
optimally handle this new situation.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Neither of the two drivers provides any SLIB parameter data, so get rid
of the dead code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move all QIB-related code into qdio_setup_qib(), and slightly re-order
it according to the order of the struct's fields. This makes it easier
to understand what the QIB actually looks like before we send it to HW.
Also get rid of the qebsm_possible() helper - as 31-bit support is long
gone, the comment doesn't make any sense. And while removing some stale
QIB-related comment, also move the clearing of the QDR into its proper
place.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Prefer dev_info() over a raw printk. This also adds the device and
driver names into the output, so that we have:
Before:
qdio: 0.0.17c0 ZFCP on SC 17 using [...]
After:
zfcp 0.0.17c0: qdio: ZFCP on SC 17 using [...]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Push the sync check from qdio_inspect_queue() down into the two
get_*_buffer_frontier() code paths, where we actually need the sync to
look at the current queue state. This lets us avoid the check when we
know that there is no work on the queue (ie. when q->nr_buf_used is 0).
While at it introduce the qdio_sync_*_queue() helpers, so that we can
avoid the branch on q->is_input_q when we already know the queue type.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Don't bother with translating the SIGA-related capability bits into
our own internal format, just cache the full qdioac1 field instead.
Also adjust the helper macros so that they take a qdio_irq argument
and can be used everywhere, instead of taking a qdio_q and then
internally dereferencing the parent pointer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The queue processing is fully decoupled from any preceding interrupt,
so we're no longer making any use of the sync-after-IRQ HW capabilities.
And as SIGA-sync is a legacy feature, there's also not much point in
re-designing the driver & qdio-layer code just so that we can
potentially avoid a few syncs. So just remove all the leftover code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Clean up yet another path where HW wants an absolute address, and we've
been implicitly relying on V=R.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Introduce dev_busid, which exports the device-id associated with the
io-subchannel (and message-subchannel). The dev_busid indicates that of
the device which may be physically installed on the corrosponding
subchannel. The dev_busid value "none" indicates that the subchannel
is not valid, there is no I/O device currently associated with the
subchannel.
The dev_busid information would be helpful to write device-specific
udev-rules associated with the subchannel. The dev_busid interface would
be available even when the sch is not bound to any driver or if there is
no operational device connected on it. Hence this attribute can be used to
write udev-rules which are specific to the device associated with the
subchannel.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch introduces a new rescan sys-interface for channel-subsystem.
The rescan interface allows the user to invoke an evaluation of all
subchannels defined in the I/O configuration.
The new rescan interface can be found at /sys/devices/css0/rescan
and can be triggered by,
echo > /sys/devices/css0/rescan
Writing to this interface triggers subchannel evaluation. The write
request completes only after scan-related work has completed
This user-invoked subchannel evaluation allows manual recovery in error
situations such as:
- restart of device discovery after resolution of temporary device
error
- inconsistent OS view of subchannel state due to missing state-change
interrupts (CRWs)
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The user can open multiple device FDs if it likes, however these open()
functions call vfio_register_notifier() on some device global
state. Calling vfio_register_notifier() twice in will trigger a WARN_ON
from notifier_chain_register() and the first close will wrongly delete the
notifier and more.
Since these really want the new open/close_device() semantics just change
the functions over.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
These macros haven't seen any use in a long time. Also note that the
queue_irqs_*() ones wouldn't even compile anymore.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
get_outbound_buffer_frontier() is only reached via qdio_inspect_queue(),
and there we already call qdio_siga_sync_q() unconditionally.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Both qdio drivers have moved away from using qdio's internal tasklet
and timer mechanisms for Output Queues. Rip out all the leftovers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If qdio_cancel_ccw() times out (or is interrupted) before the interrupt
for the {halt,clear} action arrives, report this back to the caller as
an error.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If the ESTABLISH ccw fails (ie. the qdio_irq is set to
QDIO_IRQ_STATE_ERR), we don't need to call qdio_shutdown() for rolling
back our earlier actions. All the needed logic is already available in
qdio_establish()'s error chain, and using it means we don't have to
temporarily drop the setup_mutex either.
This makes qdio_shutdown() a purely external function, that should only
be called by the driver if an earlier qdio_establish() succeeded.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When the ESTABLISH ccw does not complete within the specified timeout,
try our best to cancel the ccw program that is still active on the
device. Otherwise the IO subsystem might be accessing it even after
the driver eg. called qdio_free().
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When qdio_establish() times out while waiting for the ESTABLISH ccw to
complete, it calls qdio_shutdown() to roll back all of its previous
actions. But at this point the qdio_irq's state is still
QDIO_IRQ_STATE_INACTIVE, so qdio_shutdown() will exit immediately
without doing any actual work.
Which means that eg. the qdio_irq's thinint-indicator stays registered,
and cdev->handler isn't restored to its old value. And since
commit 954d6235be ("s390/qdio: make thinint registration symmetric")
the qdio_irq also stays on the tiq_list, so on the next qdio_establish()
we might get a helpful BUG from the list-debugging code:
...
[ 4633.512591] list_add double add: new=00000000005a4110, prev=00000001b357db78, next=00000000005a4110.
[ 4633.512621] ------------[ cut here ]------------
[ 4633.512623] kernel BUG at lib/list_debug.c:29!
...
[ 4633.512796] [<00000001b2c6ee9a>] __list_add_valid+0x82/0xa0
[ 4633.512798] ([<00000001b2c6ee96>] __list_add_valid+0x7e/0xa0)
[ 4633.512800] [<00000001b2fcecce>] qdio_establish_thinint+0x116/0x190
[ 4633.512805] [<00000001b2fcbe58>] qdio_establish+0x128/0x498
...
Fix this by extracting a goto-chain from the existing error exits in
qdio_establish(), and check the return value of the wait_event_...()
to detect the timeout condition.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Root-caused-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core ignores the return value of scmdev_remove()
(because there is only little it can do when a device disappears).
So make it impossible for future drivers to return an unused error code
by changing the remove prototype to return void.
The real motivation for this change is the quest to make struct
bus_type::remove return void, too.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core only calls a bus remove callback when there is a driver.
So dev->driver is never NULL and the check can safely be removed.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core ignores the return value of css_remove()
(because there is only little it can do when a device disappears) and
all callbacks return 0 anyhow.
So make it impossible for future drivers to return an unused error code
by changing the remove prototype to return void.
The real motivation for this change is the quest to make struct
bus_type::remove return void, too.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit fb64de1bc3 ("s390/qeth: phase out OSN support") spelled out
why the OSN support in qeth is in a bad shape, and put any remaining
interested parties on notice to speak up before it gets ripped out.
It's 2021 now, so make true on that promise and remove all the
OSN-specific parts from qeth. This also means that we no longer need to
export various parts of the cmd & data path internals to the L2 driver.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change remaining inline assemblies to also use symbolic names for
operands, use "Q" constraint when possible, and use "+" modifier so
that an operand needs to be specified only once.
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently css_wait_for_slow_path() gets called inside the chp->lock.
The path-verification-loop of slowpath inside this lock could lead to
deadlock as reported by the lockdep validator.
The ccw_device_get_chp_desc() during the instance of a device-set-online
would try to acquire the same 'chp->lock' to read the chp->desc.
The instance of this function can get called from multiple scenario,
like probing or setting-device online manually. This could, in some
corner-cases lead to the deadlock.
lockdep validator reported this as,
CPU0 CPU1
---- ----
lock(&chp->lock);
lock(kn->active#43);
lock(&chp->lock);
lock((wq_completion)cio);
The chp->lock was introduced to serialize the access of struct
channel_path. This lock is not needed for the css_wait_for_slow_path()
function, so invoke the slow-path function outside this lock.
Fixes: b730f3a933 ("[S390] cio: add lock to struct channel_path")
Cc: <stable@vger.kernel.org>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To avoid casting ptrace members, add a union containing
both struct tpi_info and explicit int_code/int_parm members.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For future work we need the struct tpi_info declaration in asm/ptrace.h.
Due to circular dependencies it cannot stay in asm/lowcore.h or asm/cio.h,
which would be the preferred location. Therefore add it in its own header
file.
Also fix a typo in the length of a reserved field that did not have a
functional effect beyond an incorrect field value in the s390_cio_tpi
tracepoint.
Fixes: 2ab59de7c5 ("s390/cio: Consolidate inline assemblies and related data definitions")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
ccwgroup_notifier() currently listens for BUS_NOTIFY_UNBIND_DRIVER
events, and triggers an ungrouping for the affected device.
Looking at __device_release_driver(), we can wait for a little longer
until the driver has been fully unbound and eg. bus->remove() has been
called. So listen for BUS_NOTIFY_UNBOUND_DRIVER instead. Due to locking
the current code should work just fine, but this clarifies our intent.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
driver_unregister() ends up calling __device_release_driver() for
each device that is bound to the driver. Thus ccwgroup_notifier() will
see a BUS_NOTIFY_UNBIND_DRIVER event for these ccwgroup devices, and
trigger the ungrouping.
So there's no need to also trigger the ungrouping from within
ccwgroup_driver_unregister(), remove it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Wiring up the cdevs is an essential part of the gdev creation. So
release them during the gdev destruction, ie. on the last put_device().
This could cause us to hold on to the cdevs a tiny bit longer, but
that's not a real concern.
As we have much less certainty of what context this put_device() is
executed from, switch to irqsave locking.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Today, the stacked call to vfio_ccw_sch_io_todo() does three things:
1) Update a solicited IRB with CP information, and release the CP
if the interrupt was the end of a START operation.
2) Copy the IRB data into the io_region, under the protection of
the io_mutex
3) Reset the vfio-ccw FSM state to IDLE to acknowledge that
vfio-ccw can accept more work.
The trouble is that step 3 is (A) invoked for both solicited and
unsolicited interrupts, and (B) sitting after the mutex for step 2.
This second piece becomes a problem if it processes an interrupt
for a CLEAR SUBCHANNEL while another thread initiates a START,
thus allowing the CP and FSM states to get out of sync. That is:
CPU 1 CPU 2
fsm_do_clear()
fsm_irq()
fsm_io_request()
vfio_ccw_sch_io_todo()
fsm_io_helper()
Since the FSM state and CP should be kept in sync, let's make a
note when the CP is released, and rely on that as an indication
that the FSM should also be reset at the end of this routine and
open up the device for more work.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210511195631.3995081-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When an I/O request is made, the fsm_io_request() routine
moves the FSM state from IDLE to CP_PROCESSING, and then
fsm_io_helper() moves it to CP_PENDING if the START SUBCHANNEL
received a cc0. Yet, the error case to go from CP_PROCESSING
back to IDLE is done after the FSM call returns.
Let's move this up into the FSM proper, to provide some
better symmetry when unwinding in this case.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20210511195631.3995081-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have a really nice flag in the channel_program struct that
indicates if it had been initialized by cp_init(), and use it
as a guard in the other cp accessor routines, but not for a
duplicate call into cp_init(). The possibility of this occurring
is low, because that flow is protected by the private->io_mutex
and FSM CP_PROCESSING state. But then why bother checking it
in (for example) cp_prefetch() then?
Let's just be consistent and check for that in cp_init() too.
Fixes: 71189f263f ("vfio-ccw: make it safe to access channel programs")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20210511195631.3995081-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
- add support for system call stack randomization.
- handle stale PCI deconfiguration events.
- couple of defconfig updates.
- some fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=C1HZ
-----END PGP SIGNATURE-----
Merge tag 's390-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- add support for system call stack randomization
- handle stale PCI deconfiguration events
- couple of defconfig updates
- some fixes and cleanups
* tag 's390-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility
s390/entry: add support for syscall stack randomization
s390/configs: change CONFIG_VIRTIO_CONSOLE to "m"
s390/cio: remove invalid condition on IO_SCH_UNREG
s390/cpumf: remove call to perf_event_update_userpage
s390/cpumf: move counter set size calculation to common place
s390/cpumf: beautify if-then-else indentation
s390/configs: enable CONFIG_PCI_IOV
s390/pci: handle stale deconfiguration events
s390/pci: rename zpci_configure_device()
The condition to check the cdev pointer validity on
css_sch_device_unregister() is a leftover from the 'commit 8cc0dcfdc1
("s390/cio: remove pm support from ccw bus driver")'. This could lead to a
situation, where detaching the device is not happening completely. Remove
this invalid condition in the IO_SCH_UNREG case.
Link: https://lore.kernel.org/r/20210423100843.2230969-1-vneethv@linux.ibm.com
Fixes: 8cc0dcfdc1 ("s390/cio: remove pm support from ccw bus driver")
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The driver core standard is to pass in the properly typed object, the
properly typed attribute and the buffer data. It stems from the root
kobject method:
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr,..)
Each subclass of kobject should provide their own function with the same
signature but more specific types, eg struct device uses:
ssize_t (*show)(struct device *dev, struct device_attribute *attr,..)
In this case the existing signature is:
ssize_t (*show)(struct kobject *kobj, struct device *dev,..)
Where kobj is a 'struct mdev_type *' and dev is 'mdev_type->parent->dev'.
Change the mdev_type related sysfs attribute functions to:
ssize_t (*show)(struct mdev_type *mtype, struct mdev_type_attribute *attr,..)
In order to restore type safety and match the driver core standard
There are no current users of 'attr', but if it is ever needed it would be
hard to add in retroactively, so do it now.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <18-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The kobj here is a type-erased version of mdev_type, which is already
stored in the struct mdev_device being passed in. It was only ever used to
compute the type_group_id, which is now extracted directly from the mdev.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <17-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use DECLARE_WAIT_QUEUE_HEAD to declare and statically initialize the
work_queue_head_t.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
wait_queue_head_t can be initialized automatically with
DECLARE_WAIT_QUEUE_HEAD() rather than explicitly calling
init_waitqueue_head().
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
static spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
We are spending way too much effort on qdio-internal bookkeeping for
QAOB management & caching, and it's still not robust. Once qdio's
TX path has detached the QAOB from a PENDING buffer, we lost all
track of it until it shows up in a CQ notification again. So if the
device is torn down before that notification arrives, we leak the QAOB.
Just have the driver take care of it, and simply pass down a QAOB if
they want a TX with async-completion capability. For a buffer in PENDING
state that requires the QAOB for final completion, qeth can now also try
to recycle the buffer's QAOB rather than unconditionally freeing it.
This also eliminates the qdio_outbuf_state array, which was only needed
to transfer the aob->user1 tag from the driver to the qdio layer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch introduces the mechanism to inject artificial events to the
CIO layer.
One of the main-event type which triggers the CommonIO operations are
Channel Report events. When a malfunction or other condition affecting
channel-subsystem operation is recognized, a Channel Report Word
(consisting of one or more CRWs) describing the condition is made
pending for retrieval and analysis by the program. The CRW contains
information concerning the identity and state of a facility following
the detection of the malfunction or other condition.
The patch introduces two debugfs interfaces which can be used to inject
'artificial' events from the userspace. It is intended to provide an easy
means to increase the test coverage for CIO code. And this functionality
can be enabled via a new configuration option CONFIG_CIO_INJECT.
The newly introduces debugfs interfaces can be used as mentioned below
to generate different fake-events. To use the crw_inject, first we should
enable it by using enable_inject interface.
i.e
echo 1 > /sys/kernel/debug/s390/cio/enable_inject
After the first step, user can simulate CRW as follows:
echo <solicited> <overflow> <chaining> <rsc> <ancillary> <erc> <rsid> \
> /sys/kernel/debug/s390/cio/crw_inject
Example:
A permanent error ERC on CHPID 0x60 would look like this:
echo 0 0 0 4 0 6 0x60 > /sys/kernel/debug/s390/cio/crw_inject
and an initialized ERC on the same CHPID:
echo 0 0 0 4 0 2 0x60 > /sys/kernel/debug/s390/cio/crw_inject
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch introduces an s390 Common I/O layer debugfs directory that is
intended to provide access to debugging-related CIO functions and data.
The directory is created as /sys/kernel/debug/s390/cio
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.
Fixes: e01bcdd613 ("vfio: ccw: realize VFIO_DEVICE_GET_REGION_INFO ioctl")
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/1614600093-13992-1-git-send-email-wangqing@vivo.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Get rid of unsigned long long, and use unsigned long instead
everywhere. The usage of unsigned long long is a leftover from
31 bit kernel support.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
For non-QEBSM devices, get_buf_states() merges PENDING and EMPTY buffers
into a single group of finished buffers. To allow the upper-layer driver
to differentiate between the two states, qdio_check_pending() looks at
each buffer's state again and sets the sbal_state flag to
QDIO_OUTBUF_STATE_FLAG_PENDING accordingly.
So effectively we're spending overhead on _every_ Output Queue
inspection, just to avoid some additional TX completion calls in case
a group of buffers has completed with mixed EMPTY / PENDING state.
Given that PENDING buffers should rarely occur, this is a bad trade-off.
In particular so as the additional checks in get_buf_states() affect
_all_ device types (even those that don't use the PENDING state).
Rip it all out, and just report the PENDING completions separately as
we already do for QEBSM devices.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For QEBSM devices the 'merge_pending' mechanism in get_buf_states()
doesn't apply, and we can actually get SLSB_P_OUTPUT_PENDING returned.
So for this case propagating the PENDING state to the driver via the
queue's sbal_state doesn't make sense and creates unnecessary overhead.
Instead introduce a new QDIO_ERROR_* flag that gets passed to the
driver, and triggers the same processing as if the buffers were flagged
as QDIO_OUTBUF_STATE_FLAG_PENDING.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When inspecting a queue, any error is currently returned back through
the queue's qdio_error field. Turn this into a proper variable that gets
passed through the call chain, so that the lifetime is clear and the
error state can be accessed along the way.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We don't kick the handler for Input Queues anymore. Move the remaining
code into its only caller.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We currently track the time of the most recent QDIO Adapter Interrupt.
This is a system-wide timestamp (as such interrupts are not bound to
one specific qdio device).
If interrupt processing stalls on one device but is functional for a
different device, the timestamp continues to be updated and is of no
help for problem diagnosis.
So for debugging purposes also track the time of the last Data IRQ on
a per-device level. Collect this data in the legacy non-AI path as well.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
tiqdio_add_device() adds the device to the tiq_list of eligible targets
for a data IRQ, which gets walked on each QDIO Adapter Interrupt to
inspect their DSCIs.
But currently the tiqdio_add_device() / tiqdio_remove_device() calls
are not symmetric - the device is removed within qdio_shutdown(),
but only added by qdio_activate().
So depending on the call sequence and encountered errors, we might
be trying to remove a list entry in qdio_shutdown() that was never even
added to the list. This required additional INIT_LIST_HEAD() calls to
ensure that the list entry was always in a consistent state.
All drivers now fence the IRQ delivery via qdio_start_irq() /
qdio_stop_irq(), so we can nicely integrate this tiq_list management
with the other steps needed for QDIO Adapter IRQ (de-)registration
(qdio_establish_thinint() / qdio_shutdown_thinint()).
As the naming suggests these get called during qdio_establish() and
qdio_shutdown(), with proper symmetry and roll-back after errors.
With this we longer need to worry about misplaced list removals, and
thus can clean up the list API abuse (INIT_LIST_HEAD() should not be
called on list entries).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert the Output Queue tasklet code to take a tasklet_struct as
parameter. Then initialize the tasklet with tasklet_setup() to indicate
that we follow the new model.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Both qeth and zfcp have fully moved to the polling-driven flow for
Input Queues with commit 0a6e634535 ("s390/qdio: extend polling
support to multiple queues") and commit 0b524abc2d ("scsi: zfcp: Lift
Input Queue tasklet from qdio").
So remove the tasklet code for Input Queues, streamline the IRQ handlers
and push the tasklet struct into struct qdio_output_q.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Bypassing the DMA API is bad style, even when we don't expect any
actual problems. Let's utilize the right API helpers for setting the
DMA masks and check for returned errors, so that we benefit from
common sanity checks.
io_subchannel_allocate_dev() required some extra massaging, so that we
can return an errno other than -ENOMEM.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Set the bus type when initializing the cdev structure. The device core
won't act on it until we call device_add().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
that unwinding works properly.
- Fix stack unwinder test case to avoid rare interrupt stack corruption.
- Simplify udelay() and just let it busy loop instead of implementing a
complex logic.
- arch_cpu_idle() cleanup.
- Some other minor improvements.
-----BEGIN PGP SIGNATURE-----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=1l0g
-----END PGP SIGNATURE-----
Merge tag 's390-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
"This is mainly to decouple udelay() and arch_cpu_idle() and simplify
both of them.
Summary:
- Always initialize kernel stack backchain when entering the kernel,
so that unwinding works properly.
- Fix stack unwinder test case to avoid rare interrupt stack
corruption.
- Simplify udelay() and just let it busy loop instead of implementing
a complex logic.
- arch_cpu_idle() cleanup.
- Some other minor improvements"
* tag 's390-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: convert comma to semicolon
s390/idle: allow arch_cpu_idle() to be kprobed
s390/idle: remove raw_local_irq_save()/restore() from arch_cpu_idle()
s390/idle: merge enabled_wait() and arch_cpu_idle()
s390/delay: remove udelay_simple()
s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK
s390/delay: simplify udelay
s390/test_unwind: use timer instead of udelay
s390/test_unwind: fix CALL_ON_STACK tests
s390: make calls to TRACE_IRQS_OFF/TRACE_IRQS_ON balanced
s390: always clear kernel stack backchain before calling functions
- Fix uninitialized list walk in error path (Eric Auger)
- Use io_remap_pfn_range() (Jason Gunthorpe)
- Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy)
- Enable mdev request interrupt with CCW support (Eric Farman)
- Enable interface to iommu_domain from vfio_group (Lu Baolu)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=W/GT
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix uninitialized list walk in error path (Eric Auger)
- Use io_remap_pfn_range() (Jason Gunthorpe)
- Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy)
- Enable mdev request interrupt with CCW support (Eric Farman)
- Enable interface to iommu_domain from vfio_group (Lu Baolu)
* tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio:
vfio/type1: Add vfio_group_iommu_domain()
vfio-ccw: Wire in the request callback
vfio-mdev: Wire in a request handler for mdev parent
vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU
vfio-pci: Use io_remap_pfn_range() for PCI IO memory
vfio/pci: Move dummy_resources_list init in vfio_pci_probe()
-----BEGIN PGP SIGNATURE-----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=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
udelay_simple() callers can make use of the now simplified udelay()
implementation. No need to keep it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Core:
- support "prefer busy polling" NAPI operation mode, where we defer softirq
for some time expecting applications to periodically busy poll
- AF_XDP: improve efficiency by more batching and hindering
the adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or unaligned
reads making zero copy a performance win for much smaller messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined in
IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which
also allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to
a central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl/YXmUACgkQMUZtbf5S
IrvSQBAAgOrt4EFopEvVqlTHZbqI45IEqgtXS+YWmlgnjZCgshyMj8q1yK1zzane
qYxr/NNJ9kV3FdtaynmmHPgEEEfR5kJ/D3B2BsxYDkaDDrD0vbNsBGw+L+/Gbhxl
N/5l/9FjLyLY1D+EErknuwR5XGuQ6BSDVaKQMhYOiK2hgdnAAI4hszo8Chf6wdD0
XDBslQ7vpD/05r+eMj0IkS5dSAoGOIFXUxhJ5dqrDbRHiKsIyWqA3PLbYemfAhxI
s2XckjfmSgGE3FKL8PSFu+EcfHbJQQjLcULJUnqgVcdwEEtRuE9ggEi52nZRXMWM
4e8sQJAR9Fx7pZy0G1xfS149j6iPU5LjRlU9TNSpVABz14Vvvo3gEL6gyIdsz+xh
hMN7UBdp0FEaP028CXoIYpaBesvQqj0BSndmee8qsYAtN6j+QKcM2AOSr7JN1uMH
C/86EDoGAATiEQIVWJvnX5MPmlAoblyLA+RuVhmxkIBx2InGXkFmWqRkXT5l4jtk
LVl8/TArR4alSQqLXictXCjYlCm9j5N4zFFtEVasSYi7/ZoPfgRNWT+lJ2R8Y+Zv
+htzGaFuyj6RJTVeFQMrkl3whAtBamo2a0kwg45NnxmmXcspN6kJX1WOIy82+MhD
Yht7uplSs7MGKA78q/CDU0XBeGjpABUvmplUQBIfrR/jKLW2730=
=GXs1
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
Use of sch->dev reference after the put_device() call could trigger
the use-after-free bugs.
Fix this by simply adjusting the position of put_device.
Fixes: 37db8985b2 ("s390/cio: add basic protected virtualization support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
[vneethv@linux.ibm.com: Slight modification in the commit-message]
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Bus drivers have their own way of describing the sysfs attributes that
all devices on a bus should provide.
Switch ccwgroup_attr_groups over to use bus->dev_groups, and thus
free up dev->groups for usage by the ccwgroup device drivers.
While adjusting the attribute naming, use ATTRIBUTE_GROUPS() to get rid
of some boilerplate code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device is being unplugged, so pass the request to userspace to
ask for a graceful cleanup. This should free up the thread that
would otherwise loop waiting for the device to be fully released.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As part of removing broken pm-support from s390 arch, remove
the pm callbacks from ccw-bus driver.The power-management functions
are unused since the 'commit 394216275c ("s390: remove broken
hibernate / power management support")'.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The power-management functions are unused since the
'commit 394216275c ("s390: remove broken hibernate / power
management support")'. Remove the unused pm callbacks from
css-bus driver.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The power-management functions are unused since the
'commit 394216275c ("s390: remove broken hibernate / power
management support")'. Remove these unused pm callbacks from
io-subchannel drivers.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
As part of removing the broken pm-support from s390 arch, remove
the pm-calls from chsc subchannel driver. The power-management
functions are unused since the 'commit 394216275c ("s390: remove
broken hibernate / power management support")'.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fibre Channel Endpoint-Security event is received as an sei:nt0 type
in the CIO layer. This information needs to be shared with the
CCW device drivers using the path_events callback.
Co-developed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add an interface in the CIO layer to retrieve the information about the
Endpoint-Security Mode (ESM) of the specified CU. The ESM values are
defined as 0-None, 1-Authenticated or 2, 3-Encrypted.
[vneethv@linux.ibm.com: cleaned-up and modified description]
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new sysfs attribute 'esc' per chpid. This new attribute exports
the Endpoint-Security-Capability byte of channel-path description block,
which could be 0-None, 1-Authentication, 2 and 3-Encryption.
For example:
$ cat /sys/devices/css0/chp0.34/esc
0
[vneethv@linux.ibm.com: cleaned-up & modified description]
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Remove address space overrides using set_fs().
- Convert to generic vDSO.
- Convert to generic page table dumper.
- Add ARCH_HAS_DEBUG_WX support.
- Add leap seconds handling support.
- Add NVMe firmware-assisted kernel dump support.
- Extend NVMe boot support with memory clearing control and addition of
kernel parameters.
- AP bus and zcrypt api code rework. Add adapter configure/deconfigure
interface. Extend debug features. Add failure injection support.
- Add ECC secure private keys support.
- Add KASan support for running protected virtualization host with
4-level paging.
- Utilize destroy page ultravisor call to speed up secure guests shutdown.
- Implement ioremap_wc() and ioremap_prot() with MIO in PCI code.
- Various checksum improvements.
- Other small various fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl+JXIIACgkQjYWKoQLX
FBgIWAf9FKpnIsy/aNI2RpvojfySEhgH3T5zxGDTjghCSUQzAu0hIBPKhQOs/YfV
/apflXxNPneq7FsQPPpNqfdz2DXQrtgDfecK+7GyEVoOawFArgxiwP+tDVy4dmPT
30PNfr+BpGs7GjKuj33fC0c5U33HYvKzUGJn/GQB2Fhw+5tTDxxCubuS1GVR9iuw
/U1cQhG4KN0lwEeF2gO7BWWgqTH9C1t60+WzOQhIAbdvgtBRr1ctGu//F5S94BYL
NBw5Wxb9vUHrMm2mL0n8bi16hSn2MWHmAMQLkxPXI2osBYun3soaHUWFSA3ryFMw
4BGU+g7T66Pv3ZmLP4jH5UGrn8HWmg==
=4zdC
-----END PGP SIGNATURE-----
Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Remove address space overrides using set_fs()
- Convert to generic vDSO
- Convert to generic page table dumper
- Add ARCH_HAS_DEBUG_WX support
- Add leap seconds handling support
- Add NVMe firmware-assisted kernel dump support
- Extend NVMe boot support with memory clearing control and addition of
kernel parameters
- AP bus and zcrypt api code rework. Add adapter configure/deconfigure
interface. Extend debug features. Add failure injection support
- Add ECC secure private keys support
- Add KASan support for running protected virtualization host with
4-level paging
- Utilize destroy page ultravisor call to speed up secure guests
shutdown
- Implement ioremap_wc() and ioremap_prot() with MIO in PCI code
- Various checksum improvements
- Other small various fixes and improvements all over the code
* tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits)
s390/uaccess: fix indentation
s390/uaccess: add default cases for __put_user_fn()/__get_user_fn()
s390/zcrypt: fix wrong format specifications
s390/kprobes: move insn_page to text segment
s390/sie: fix typo in SIGP code description
s390/lib: fix kernel doc for memcmp()
s390/zcrypt: Introduce Failure Injection feature
s390/zcrypt: move ap_msg param one level up the call chain
s390/ap/zcrypt: revisit ap and zcrypt error handling
s390/ap: Support AP card SCLP config and deconfig operations
s390/sclp: Add support for SCLP AP adapter config/deconfig
s390/ap: add card/queue deconfig state
s390/ap: add error response code field for ap queue devices
s390/ap: split ap queue state machine state from device state
s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG
s390/zcrypt: introduce msg tracking in zcrypt functions
s390/startup: correct early pgm check info formatting
s390: remove orphaned extern variables declarations
s390/kasan: make sure int handler always run with DAT on
s390/ipl: add support to control memory clearing for nvme re-IPL
...
arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after
commit 05bc1be6db ("s390/pci: create zPCI bus")
arch/s390/include/asm/gmap.h: gmap_pte_notify - only declaration left
after commit 4be130a084 ("s390/mm: add shadow gmap support")
arch/s390/include/asm/pgalloc.h: rcu_table_freelist_finish - only
declaration left after commit 36409f6353 ("[S390] use generic RCU
page-table freeing code")
arch/s390/include/asm/tlbflush.h: smp_ptlb_all - only declaration left
after commit 5a79859ae0 ("s390: remove 31 bit support")
arch/s390/include/asm/vtimer.h: init_cpu_vtimer - only declaration left
after commit b5f87f15e2 ("s390/idle: consolidate idle functions and
definitions")
arch/s390/include/asm/pci.h: zpci_debug_info - only declaration left
after commit 386aa051fb ("s390/pci: remove per device debug attribute")
arch/s390/include/asm/vdso.h: vdso_alloc_boot_cpu - only declaration
left after commit 4bff8cb545 ("s390: convert to GENERIC_VDSO")
arch/s390/include/asm/smp.h: smp_vcpu_scheduled - only declaration left
after commit 67626fadd2 ("s390: enforce CONFIG_SMP")
arch/s390/kernel/entry.h: restart_call_handler - only declaration left
after commit 8b646bd759 ("[S390] rework smp code")
arch/s390/kernel/entry.h: startup_init_nobss - only declaration left
after commit 2e83e0eb85 ("s390: clean .bss before running uncompressed
kernel")
arch/s390/kernel/entry.h: s390_early_resume - only declaration left after
commit 394216275c ("s390: remove broken hibernate / power management
support")
drivers/s390/char/raw3270.h: raw3270_request_alloc_bootmem - only
declaration left after commit 33403dcfcd ("[S390] 3270 console:
convert from bootmem to slab")
drivers/s390/cio/device.h: ccw_device_schedule_sch_unregister - only
declaration left after commit 37de53bb52 ("[S390] cio: introduce ccw
device todos")
drivers/s390/char/tape.h: tape_hotplug_event - has only declaration
since recorded git history.
drivers/s390/char/tape.h: tape_oper_handler - has only declaration since
recorded git history.
drivers/s390/char/tape.h: tape_noper_handler - has only declaration
since recorded git history.
drivers/s390/char/tape_std.h: tape_std_check_locate - only declaration
left after commit 161beff8f4 ("s390/tape: remove tape block leftovers")
drivers/s390/char/tape_std.h: tape_std_default_handler - has only
declaration since recorded git history.
drivers/s390/char/tape_std.h: tape_std_unexpect_uchk_handler - has only
declaration since recorded git history.
drivers/s390/char/tape_std.h: tape_std_irq - has only declaration since
recorded git history.
drivers/s390/char/tape_std.h: tape_std_error_recovery - has only
declaration since recorded git history.
drivers/s390/char/tape_std.h: tape_std_error_recovery_has_failed -
has only declaration since recorded git history.
drivers/s390/char/tape_std.h: tape_std_error_recovery_succeded - has
only declaration since recorded git history.
drivers/s390/char/tape_std.h: tape_std_error_recovery_do_retry - has
only declaration since recorded git history.
drivers/s390/char/tape_std.h: tape_std_error_recovery_read_opposite -
has only declaration since recorded git history.
drivers/s390/char/tape_std.h: tape_std_error_recovery_HWBUG - has only
declaration since recorded git history.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In the current implementation, leap seconds are only synchronized
during the bootup process when the STP clock is synced. If the Leap
second offset (LSO) changes the machine must be rebooted, which is
not desired. This patch adds the required code to handle Leap second
changes during runtime. If the Leap second changes, a Configuration
change machine check is triggered. The STP code than schedules a Leap
second insertion/deletion with do_adjtimex().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add helper functions to expose Channel Subsystem ID (CSSID), MIF Image Id
(IID), Channel ID (CHID) and Channel Path ID (CHPID).
These values are required by the qeth driver's exploitation of network-
address-change-notifications to determine which entries belong to this
interface.
Store the Partition identifier in System log, as this may be used to map
a Linux view to a Hardware view for debugging purpose.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for operation code 3 (OC3) of the
Perform-Network-Subchannel-Operations (PNSO) function
of the Channel-Subsystem-Call (CHSC) instruction.
PNSO provides 2 operation codes:
OC0 - BRIDGE_INFO
OC3 - ADDR_INFO (new)
Extend the function calls to *pnso* to pass the OC and
add new response code 0108.
Support for OC3 is indicated by a flag in the css_general_characteristics.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Passing a custom name from the device driver is nice - but in practice
it's only zfcp who has been using this. So we might as well hard-code
a naming scheme in the qdio layer, so that qeth also benefits from it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
__qdio_allocate_fill_qdr() is meant to set up one specific queue
descriptor in the QDR. But for this simple task, it gets passed a bunch
of global structs and offsets - and then navigates through the structs
to find its actual operands.
Clean up all the complicated pointer chasing & index calculation, and
just pass a descriptor and its associated queue struct.
While at it also add some virt_to_phys() translations, to clarify that
addresses in the QDR are meant to be absolute.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When processing a PENDING buffer with no attached aob, the current code
would get stuck on this buffer (as the 'continue' causes us to not
advance the buffer index) and process it repeatedly until the loop
terminates eventually.
Luckily this should never happen - the HW must not use the PENDING state
when no aob was provided. But we can still make this code path less
fragile and protect against buggy devices.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The scanning through subchannels during the time of an event could
take significant amount of time in case of platforms with lots of
known subchannels. This might result in higher scheduling latencies
for other tasks especially on systems with a single CPU. Add
cond_resched() call, as the loop in slow_eval_known_fn() can be
executed for a longer duration.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Add support for custom exception handlers, as required by BPF_PROBE_MEM.
- Add support for BPF_PROBE_MEM.
- Add trace events for idle enter / exit for the s390 specific idle
implementation.
- Remove unused zcore memmmap device.
- Remove unused "raw view" from s390 debug feature.
- AP bus + zcrypt device driver code refactoring.
- Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver.
- Expose only minimal interface to walk physmem for mm/memblock. This
is a common code change and it has been agreed on with Mike Rapoport
and Andrew Morton that this can go upstream via the s390 tree.
- Rework of the s390 vmem/vmmemap code to allow for future memory hot
remove.
- Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10
allocations again, instead of only order-8 allocations.
- Various small improvements and fixes.
-----BEGIN PGP SIGNATURE-----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=H0KX
-----END PGP SIGNATURE-----
Merge tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for function error injection.
- Add support for custom exception handlers, as required by
BPF_PROBE_MEM.
- Add support for BPF_PROBE_MEM.
- Add trace events for idle enter / exit for the s390 specific idle
implementation.
- Remove unused zcore memmmap device.
- Remove unused "raw view" from s390 debug feature.
- AP bus + zcrypt device driver code refactoring.
- Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver.
- Expose only minimal interface to walk physmem for mm/memblock. This
is a common code change and it has been agreed on with Mike Rapoport
and Andrew Morton that this can go upstream via the s390 tree.
- Rework of the s390 vmem/vmmemap code to allow for future memory hot
remove.
- Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10
allocations again, instead of only order-8 allocations.
- Various small improvements and fixes.
* tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/vmemmap: coding style updates
s390/vmemmap: avoid memset(PAGE_UNUSED) when adding consecutive sections
s390/vmemmap: remember unused sub-pmd ranges
s390/vmemmap: fallback to PTEs if mapping large PMD fails
s390/vmem: cleanup empty page tables
s390/vmemmap: take the vmem_mutex when populating/freeing
s390/vmemmap: cleanup when vmemmap_populate() fails
s390/vmemmap: extend modify_pagetable() to handle vmemmap
s390/vmem: consolidate vmem_add_range() and vmem_remove_range()
s390/vmem: rename vmem_add_mem() to vmem_add_range()
s390: enable HAVE_FUNCTION_ERROR_INJECTION
s390/pci: clarify comment in s390_mmio_read/write
s390/time: improve comparison for tod steering
s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE
s390/time: use CLOCKSOURCE_MASK
s390/bpf: implement BPF_PROBE_MEM
s390/kernel: expand exception table logic to allow new handling options
s390/kernel: unify EX_TABLE* implementations
s390/mm: allow order 10 allocations
s390/mm: avoid trimming to MAX_ORDER
...
For non-thinint devices in LPAR, qdio polls an idle Input Queue for a
little while to catch more work. But platform support for thinints has
been around practically _forever_ by now, so this micro-optimization is
seeing 0 actual use. Remove it to reduce the overall complexity of the
hot path.
In the meantime we also grew support for driver-level polling
(eg. NAPI in qeth), so it's quite questionable how useful this would
actually be on current kernels.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The comment is inaccurate, qdio_inbound_q_moved() and/or its callers no
longer get confused by a count of 128 completed SBALs.
Scanning all 128 SBALs at once can improve IRQ reduction (as we now
place the ACK at the right spot), and reduce the amount of processing
needed to handle all completed SBALs.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Old code would only scan up to 127 SBALs at once. So the last statistics
bucket was set aside to count "discovered 127 SBALs with new work"
events.
But nowadays we allow to scan all 128 SBALs for Output Queues, and a
subsequent patch will introduce the same for Input Queues.
So fix up the accounting to use the last bucket only when all 128 SBALs
have been discovered with new work.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Include linux/slab.h to fix a build error due to kfree() being undefined.
Fixes: 3f02cb2fd9 ("vfio-ccw: Wire up the CRW irq and CRW region")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703022628.6036-1-sean.j.christopherson@intel.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The way we produce SBALs to the device (first update q->nr_buf_used,
then update the SLSB) should ensure that we never see some of the
SLSB states when scanning the queue for progress.
So make some noise if we do, this implies a bug in our SBAL tracking.
Also tweak the WARN msg to provide more information.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This removes the last remaining accesses to ->qdio_data from internal
code. Just pass the qdio_irq struct where needed instead.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Streamline the processing of QDIO Input Queues, and remove some
intermittent SLSB updates (no deleting of old ACKs, no redundant
transitions through NOT_INIT).
Rather than counting ACKs, we now keep track of the whole batch of
SBALs that were completed during the current polling cycle.
Most completed SBALs stay in their initial state (ie. PRIMED or ERROR),
except that the most recent SBAL in each sub-run is ACKed for
IRQ reduction.
The only logic changes happen in inbound_handle_work(), the other
delta is just a renaming of the variables that track the SBAL batch.
Note that in particular we don't need to flip the _oldest_ SBAL to
an idle state (eg. NOT_INIT or ACKed) as a guard against catching our
own tail. Since get_inbound_buffer_frontier() will never scan more than
the remaining nr_buf_used SBALs, this scenario just doesn't occur.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
xchg() for a single-byte location assembles to a 4-byte Compare&Swap,
wrapped into a non-trivial amount of retry code that deals with
concurrent modifications to the unaffected bytes.
Change it to a simple byte-store, but preserve the memory ordering
semantics that the CS provided.
This simplifies the generated code for a hot path, and in theory also
allows us to amortize the memory barriers over multiple SLSB updates.
CC: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes the following sparse warnings:
drivers/s390/cio/vfio_ccw_chp.c:62:30: warning: symbol 'vfio_ccw_schib_region_ops' was not declared. Should it be static?
drivers/s390/cio/vfio_ccw_chp.c:117:30: warning: symbol 'vfio_ccw_crw_region_ops' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/patch.git-a34be7aede18.your-ad-here.call-01591269421-ext-5655@work.hours
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since CRW events are (should be) rare, let's put a trace
in that routine too.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-9-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use the IRQ to notify userspace that there is a CRW
pending in the region, related to path-availability
changes on the passthrough subchannel.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-8-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This region provides a mechanism to pass a Channel Report Word
that affect vfio-ccw devices, and needs to be passed to the guest
for its awareness and/or processing.
The base driver (see crw_collect_info()) provides space for two
CRWs, as a subchannel event may have two CRWs chained together
(one for the ssid, one for the subchannel). As vfio-ccw will
deal with everything at the subchannel level, provide space
for a single CRW to be transferred in one shot.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-7-farman@linux.ibm.com>
[CH: added padding to ccw_crw_region]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The schib region can be used by userspace to get the subchannel-
information block (SCHIB) for the passthrough subchannel.
This can be useful to get information such as channel path
information via the SCHIB.PMCW fields.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is mostly for the purposes of a later patch, since
we'll need to do the same thing later.
While we are at it, move the resulting function call to ahead
of the unregistering of the IOMMU notifier, so that it's done
in the reverse order of how it was created.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Register the chp_event callback to receive channel path related
events for the subchannels managed by vfio-ccw.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Consolidate some of the cleanup code for the regions, so that
as more are added we reduce code duplication.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Remove the explicit prefetch check when using vfio-ccw devices.
This check does not trigger in practice as all Linux channel programs
are intended to use prefetch.
It is expected that all ORBs issued by Linux will request prefetch.
Although non-prefetching ORBs are not rejected, they will prefetch
nonetheless. A warning is issued up to once per 5 seconds when a
forced prefetch occurs.
A non-prefetch ORB does not necessarily result in an error, however
frequent encounters with non-prefetch ORBs indicate that channel
programs are being executed in a way that is inconsistent with what
the guest is requesting. While there is currently no known case of an
error caused by forced prefetch, it is possible in theory that forced
prefetch could result in an error if applied to a channel program that
is dependent on non-prefetch.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20200506212440.31323-2-jrossi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CHSC3D (PNSO - perform network subchannel operation) is used for
OC0 (Store-network-bridging-information) as well as for
OC3 (Store-network-address-information). So common fields are renamed
from *brinfo* to *pnso*.
Also *_bridge_host_* is changed into *_addr_change_*, e.g.
qeth_bridge_host_event to qeth_addr_change_event, for the
same reasons.
The keywords in the card traces are changed accordingly.
Remove unused L3 types, as PNSO will only return Layer2 entries.
Make PNSO CHSC implementation more consistent with existing API usage:
Add new function ccw_device_pnso() to drivers/s390/cio/device_ops.c and
the function declaration to arch/s390/include/asm/ccwdev.h, which takes
a struct ccw_device * as parameter instead of schid and calls
chsc_pnso().
PNSO CHSC has no strict relationship to qdio. So move the calling
function from qdio to qeth_l2 and move the necessary structures to a
new file arch/s390/include/asm/chsc.h.
Do response code evaluation only in chsc_error_from_response() and
use return code in all other places. qeth_anset_makerc() was meant to
evaluate the PNSO response code, but never did, because pnso_rc was
already non-zero.
Indentation was corrected in some places.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
q->first_to_kick is obsolete, and can be replaced by q->first_to_check.
Both cursors start off at 0. Out of the three code paths that update
first_to_check, the qdio_inspect_queue() path is irrelevant as it
doesn't even touch first_to_kick anymore.
This leaves us with the two tasklet-driven code paths. Here any update
to first_to_check is followed by a call to qdio_kick_handler(), which
advances first_to_kick by the same amount.
So the two cursors will differ only for a tiny moment. Drivers have no
way of deterministically observing this difference, and thus it doesn't
matter which of the cursors we use for reporting an error to q->handler.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Document the actual semantics, correcting an old copy & paste mistake.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
SBALs in PRIMED or ERROR state represent new work on the Input Queue.
But while inbound_primed() does all sorts of ACK management for new
PRIMED work, the same handling is currently missing for ERROR work.
In particular the path for ERROR work doesn't clear up _old_ ACKs.
Treat ERROR work the same as PRIMED work, but consider that the QEBSM
auto-ACK feature doesn't apply here. So we need to set the ACK manually,
as if it was a non-QEBSM device.
Note that this doesn't aspire to actually improve performance, the main
goal is to just unify the code paths and have consistent behaviour.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
inbound_primed() currently has two code paths - one for QEBSM that knows
how to deal with multiple ACKs, and a non-QEBSM path that strictly
assumes a single ACK on the queue.
In preparation for a subsequent patch, slightly adjust the non-QEBSM
path so that it can manage a queue with multiple ACKs.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Refilling the Input Queue requires additional checks, as the refilled
SBALs can overlap with the ACKs that qdio maintains on the queue.
This code path is way too complex, and does a whole bunch of wrap-around
checks that the modulo arithmetic in sub_buf() takes care of by itself.
So shrink down all that code into a few lines of equivalent
functionality.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
buf_in_between() gets passed q->u.in.ack_start as 'bufnr' parameter.
The ack_start always ranges between 0 and QDIO_MAX_BUFFERS_PER_Q - 1,
so the subsequent check will always return true. Remove it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Except for some initial thinint-only steps, the processing is identical
to the non-thinint case. So re-use the existing helper.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Knowing how many queues we initially allocated allows us to
1) sanity-check a subsequent qdio_establish() request, and
2) walk the queue arrays without further checks. Apply this while
cleanly splitting qdio_free_queues() into two separate helpers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When qdio_allocate_qs() fails, have it deal with its previous
allocations.
This way qdio_allocate() doesn't need to clean up afterwards.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Instead of having a catch-all qdio_release_memory() helper, free the
individual allocations from the respective error path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Wrap the init/exit steps for thinint into a single helper that follows
the established naming scheme.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq().
If the subsequent qdio_establish_thinint() fails, we miss to put the
DSCI again. Thus the DSCI isn't available for re-use. Given enough of
such errors, we could end up with having only the shared DSCI available.
Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with
such an error internally.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
qdio_establish() calls qdio_establish_thinint(), but later has an error
exit path that doesn't roll this call back. Fix it.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For rolling back after an error, qdio_establish() calls qdio_shutdown().
If the error occurs early enough, then the qdio_irq's state still is
QDIO_IRQ_STATE_INACTIVE and qdio_shutdown() does nothing.
But at _any_ point where qdio_establish() bails out in this way,
qdio_setup_irq() will have already replaced the IRQ handler. This then
won't be restored after an early error, and the device can end up being
returned to the device driver with qdio's IRQ handler still installed.
Slightly reorder qdio_setup_irq() so we can be 100% sure that the IRQ
handler was replaced. Then fix the bug in qdio_establish() by calling a
helper that rolls back only the IRQ handler modification.
Also use the new helper in qdio_shutdown() to keep things in sync, and
slightly clean up the locking while doing so.
This makes minor semantical changes, but holding setup_mutex gives us
sufficient leeway to eg. pull qdio_shutdown_thinint() outside of the
ccwdev lock's scope.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The vfio-ccw I/O subchannel driver, however, did not
do that, and will not generate an ADD uevent for subchannels
that had not been bound to a different driver (or none at all,
which also triggers the uevent).
Generate the ADD uevent at the end of the probe function if
uevents were still suppressed for the device.
Message-Id: <20200327124503.9794-3-cohuck@redhat.com>
Fixes: 63f1934d56 ("vfio: ccw: basic implementation for vfio_ccw driver")
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.
To fix this, only generate the ADD event if uevents were still
suppressed for the device.
Fixes: fa1a8c23eb ("s390: cio: Delay uevents for subchannels")
Message-Id: <20200327124503.9794-2-cohuck@redhat.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Polling drivers in a configuration with 1 Input Queue currently keep
their DSCI armed all the way through the poll cycle, until
qdio_start_irq() clears it.
_Any_ intermittent QDIO interrupt delivered to tiqdio_thinint_handler()
will thus cause
1) the 'adapter_int' statistic to be incremented,
2) a call to tiqdio_call_inq_handlers() for this device, and then
3) the 'int_discarded' statistics to be incremented.
This causes overhead & complexity in the IRQ path, along with ambiguity
in the statistics.
On the other hand the device should be in IRQ avoidance mode during a
poll cycle, so there won't be a lot of DSCI ping-pong that this
micro-optimization could prevent.
So align the DSCI handling with what we already do for devices with
multiple Input Queues: clear it right away while processing the IRQ.
For the non-polling path this means that we no longer need to handle
the 1-queue case separately.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This is just prep work for a subsequent patch, no functional change.
For the non-polling path we can pull the code chunk in front of the
for-loop, since it only evaluates to true for a 1-queue configuration.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers()
for each individual queue. But when later passing the SBAL addresses to
qdio_establish(), they need to be in a single array of pointers.
So if the driver uses multiple Input or Output queues, it needs to
allocate a temporary array just to present all its SBAL pointers in this
layout.
This patch slightly changes the format of the QDIO initialization data,
so that drivers can pass a per-queue array where each element points to
a queue's SBAL array.
zfcp doesn't use multiple queues, so the impact there is trivial.
For qeth this brings a nice reduction in complexity, and removes
a page-sized allocation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
All that qdio_allocate() actually uses from the init_data is the cdev,
and the number of Input and Output Queues. Have the driver pass those as
parameters, and defer the init_data processing into qdio_establish().
This includes writing per-device(!) trace entries, and most of the
sanity checks.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan
common io code.
- Extend cpuinfo to include topology information.
- Add new extended counters for IBM z15 and sampling buffer allocation
rework in perf code.
- Add control over zeroing out memory during system restart.
- CCA protected key block version 2 support and other fixes/improvements
in crypto code.
- Convert to new fallthrough; annotations.
- Replace zero-length arrays with flexible-arrays.
- QDIO debugfs and other small improvements.
- Drop 2-level paging support optimization for compat tasks. Varios
mm cleanups.
- Remove broken and unused hibernate / power management support.
- Remove fake numa support which does not bring any benefits.
- Exclude offline CPUs from CPU topology masks to be more consistent
with other architectures.
- Prevent last branching instruction address leaking to userspace.
- Other small various fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl6Ig2YACgkQjYWKoQLX
FBj2gggAibnHOl9d0ngX1mVT4nz51R3V8z5sEQjNMr2uHBmaTqs7pi/00gaFMxoC
NngVEXvL443jSogQivthGgXPpRCV9xdKE3sp38j7fF4LgHoeuDtGd1oaX4W9Rqk0
7Yii35EaO2e2WHdOKaAbu+ZvDRunFjERyntc51MYaIUivFosogSo07vC73vFIArF
VGStS09fJ4Ny76ott896T7Ulx1Iek/MkF1vponEMLGNUIcLIQbbxZxOwgz0pHuEF
SlyyJBnhOIaAJGOYlKREQDt1cew+hsxluPU+a01bwdsmdZv9LH1BGwLayDqTH58i
QWvtEpzJFmDvo9jGM1v81ebaGnyCKg==
=hiGF
-----END PGP SIGNATURE-----
Merge tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Update maintainers. Niklas Schnelle takes over zpci and Vineeth
Vijayan common io code.
- Extend cpuinfo to include topology information.
- Add new extended counters for IBM z15 and sampling buffer allocation
rework in perf code.
- Add control over zeroing out memory during system restart.
- CCA protected key block version 2 support and other
fixes/improvements in crypto code.
- Convert to new fallthrough; annotations.
- Replace zero-length arrays with flexible-arrays.
- QDIO debugfs and other small improvements.
- Drop 2-level paging support optimization for compat tasks. Varios mm
cleanups.
- Remove broken and unused hibernate / power management support.
- Remove fake numa support which does not bring any benefits.
- Exclude offline CPUs from CPU topology masks to be more consistent
with other architectures.
- Prevent last branching instruction address leaking to userspace.
- Other small various fixes and improvements all over the code.
* tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits)
s390/mm: cleanup init_new_context() callback
s390/mm: cleanup virtual memory constants usage
s390/mm: remove page table downgrade support
s390/qdio: set qdio_irq->cdev at allocation time
s390/qdio: remove unused function declarations
s390/ccwgroup: remove pm support
s390/ap: remove power management code from ap bus and drivers
s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc
s390/mm: cleanup arch_get_unmapped_area() and friends
s390/ism: remove pm support
s390/cio: use fallthrough;
s390/vfio: use fallthrough;
s390/zcrypt: use fallthrough;
s390: use fallthrough;
s390/cpum_sf: Fix wrong page count in error message
s390/diag: fix display of diagnose call statistics
s390/ap: Remove ap device suspend and resume callbacks
s390/pci: Improve handling of unset UID
s390/pci: Fix zpci_alloc_domain() over allocation
s390/qdio: pass ISC as parameter to chsc_sadc()
...
Set up qdio_irq->cdev right when the qdio_irq struct is allocated, so
that all subsequent code can rely on this pointer.
Then convert two helper functions to not pass a cdev parameter around.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As s390 no longer supports ARCH_HIBERNATION_POSSIBLE, drop the unused
pm ops from the ccwgroup bus driver.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When the support for polling drivers was initially added, it only
considered Input Queue 0. But as QDIO interrupts are actually for the
full device and not a single queue, this doesn't really fit for
configurations where multiple Input Queues are used.
Rework the qdio code so that interrupts for a polling driver are not
split up into actions for each queue. Instead deliver the interrupt as
a single event, and let the driver decide which queue needs what action.
When re-enabling the QDIO interrupt via qdio_start_irq(), this means
that the qdio code needs to
(1) put _all_ eligible queues back into a state where they raise IRQs,
(2) and afterwards check _all_ eligible queues for new work to bridge
the race window.
On the qeth side of things (as the only qdio polling driver), we can now
add CQ polling support to the main NAPI poll routine. It doesn't consume
NAPI budget, and to avoid hogging the CPU we yield control after
completing one full queue worth of buffers.
The subsequent qdio_start_irq() will check for any additional work, and
have us re-schedule the NAPI instance accordingly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When issuing a SADC for a QDIO device, don't hardcode the ISC but use
whatever is specified in qdio's handler for Adapter Interrupts.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Message-Id: <20200304005049.5291-1-afzal.mohd.ma@gmail.com>
[heiko.carstens@de.ibm.com: replace pr_err with panic]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Once the call to qdio_establish() has completed, qdio is free to deliver
data IRQs to the device driver's IRQ poll handler.
For qeth (the only qdio driver that currently uses IRQ polling) this is
problematic, since the IRQs can arrive before its NAPI instance is
even registered. Calling napi_schedule() from qeth_qdio_start_poll()
then crashes in various nasty ways.
Until recently qeth checked for IFF_UP to drop such early interrupts,
but that's fragile as well since it doesn't enforce any ordering.
Fix this properly by bringing up the qdio device in IRQS_DISABLED mode,
and have the driver explicitly opt-in to receive data IRQs.
qeth does so from qeth_open(), which kick-starts a NAPI poll and then
calls qdio_start_irq() from qeth_poll().
Also add a matching qdio_stop_irq() in qeth_stop() to switch the qdio
dataplane back into a disabled state.
Fixes: 3d35dbe622 ("s390/qeth: don't check for IFF_UP when scheduling napi")
CC: Qian Cai <cai@lca.pw>
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While we print out various SSQD fields at initialization time, having
raw & full access to the current SSQD can help with debugging.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lkml.kernel.org/r/20200221150612.GA9717@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There's no need for error handling, the debugfs core is smart enough to
deal with IS_ERR() internally.
This will also keep us from creating the debugfs files if the device
directory doesn't exist. Currently (because irq_ptr->debugfs_dev gets set
to NULL on error) the files would be placed into the debugfs root - without
any association to their parent device.
On teardown, use the debugfs_remove_recursive() helper to avoid keeping
track of each created file/directory.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Don't rely on the numeric value of enum constants.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove all usage of cdev->private->qdio_data that's buried deep in
internal code. This should only be used by the exported driver API,
which can then pass around a proper qdio_irq pointer.
Also trivially merge some initializations with their definitions.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Some parts use init_data->cdev, others use irq_ptr->cdev. In the end
it's all the same, but unnecessarily confusing.
Use a single reference instead.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As the comment says, sl->sbal holds an absolute address. qeth currently
solves this through wild casting, while zfcp doesn't care.
Handle this properly in the code that actually builds the SL.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio]
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The only way to reach this allocation is via
qdio_establish()
qdio_detect_hsicq()
qdio_enable_async_operation()
and since qdio_establish() uses wait_event_*() just a few lines ealier,
we can trust that it certainly is never called from atomic context.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Current code uses a 'polling' flag to keep track of whether an Input
Queue has any ACKed SBALs. QEBSM devices might have multiple ACKed
SBALs, and those are tracked separately with 'ack_count'.
By also setting ack_count for non-QEBSM devices (to a fixed value of 1),
we can use 'ack_count != 0' as replacement for the polling flag.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch corrects the SPDX License Identifier style in
header file related to S/390 common i/o drivers.
It assigns explicit block comment to the SPDX License
Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Fixes: 3cd90214b7 ("vfio: ccw: add tracepoints for interesting error paths")
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Message-Id: <20191225122054.GA4598@nishad>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The max data count (mdc) is an unsigned 16-bit integer value as per AR
documentation and is received via ccw_device_get_mdc() for a specific
path mask from the CIO layer. The function itself also always returns a
positive mdc value or 0 in case mdc isn't supported or couldn't be
determined.
Though, the comment for this function describes a negative return value
to indicate failures.
As a result, the DASD device driver interprets the return value of
ccw_device_get_mdc() incorrectly. The error case is essentially a dead
code path.
To fix this behaviour, check explicitly for a return value of 0 and
change the comment for ccw_device_get_mdc() accordingly.
This fix merely enables the error code path in the DASD functions
get_fcx_max_data() and verify_fcx_max_data(). The actual functionality
stays the same and is still correct.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
- Adjust PMU device drivers registration to avoid WARN_ON and few other
perf improvements.
- Enhance tracing in vfio-ccw.
- Few stack unwinder fixes and improvements, convert get_wchan custom
stack unwinding to generic api usage.
- Fixes for mm helpers issues uncovered with tests validating architecture
page table helpers.
- Fix noexec bit handling when hardware doesn't support it.
- Fix memleak and unsigned value compared with zero bugs in crypto
code. Minor code simplification.
- Fix crash during kdump with kasan enabled kernel.
- Switch bug and alternatives from asm to asm_inline to improve inlining
decisions.
- Use 'depends on cc-option' for MARCH and TUNE options in Kconfig,
add z13s and z14 ZR1 to TUNE descriptions.
- Minor head64.S simplification.
- Fix physical to logical CPU map for SMT.
- Several cleanups in qdio code.
- Other minor cleanups and fixes all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl3ahGYACgkQjYWKoQLX
FBguwAgAig+FNos8zkd7Sr2wg4DPL2IlYERVP40fOLXfGuVUOnMLg8OTO6yDWDpH
5+cKAQS1wWgyvlfjWRUJ6anXLBAsgKRD1nyFIZTpn/wArGk/duCbnl/VFriDgrST
8KTQDJpZ9w9nXtQ7lA2QWaw5U2WG8I2T2JuQJCdLXze7RXi0bDVe8e6131NMaJ42
LLxqOqm8d8XDnd8oDVP04LT5IfhuI2cILoGBP/GyI2fqQk9Ems6M2gxuISq1COmy
WORDLfwWyCLeF7gWKKjxf8Vo1HYcyoFvdXnxWiHb0TDZesQZJr/LLELTP03fbCW9
U4jbXncnnPA7kT4tlC95jT5M69yK5w==
=+FxG
-----END PGP SIGNATURE-----
Merge tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Adjust PMU device drivers registration to avoid WARN_ON and few other
perf improvements.
- Enhance tracing in vfio-ccw.
- Few stack unwinder fixes and improvements, convert get_wchan custom
stack unwinding to generic api usage.
- Fixes for mm helpers issues uncovered with tests validating
architecture page table helpers.
- Fix noexec bit handling when hardware doesn't support it.
- Fix memleak and unsigned value compared with zero bugs in crypto
code. Minor code simplification.
- Fix crash during kdump with kasan enabled kernel.
- Switch bug and alternatives from asm to asm_inline to improve
inlining decisions.
- Use 'depends on cc-option' for MARCH and TUNE options in Kconfig, add
z13s and z14 ZR1 to TUNE descriptions.
- Minor head64.S simplification.
- Fix physical to logical CPU map for SMT.
- Several cleanups in qdio code.
- Other minor cleanups and fixes all over the code.
* tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/cpumf: Adjust registration of s390 PMU device drivers
s390/smp: fix physical to logical CPU map for SMT
s390/early: move access registers setup in C code
s390/head64: remove unnecessary vdso_per_cpu_data setup
s390/early: move control registers setup in C code
s390/kasan: support memcpy_real with TRACE_IRQFLAGS
s390/crypto: Fix unsigned variable compared with zero
s390/pkey: use memdup_user() to simplify code
s390/pkey: fix memory leak within _copy_apqns_from_user()
s390/disassembler: don't hide instruction addresses
s390/cpum_sf: Assign error value to err variable
s390/cpum_sf: Replace function name in debug statements
s390/cpum_sf: Use consistant debug print format for sampling
s390/unwind: drop unnecessary code around calling ftrace_graph_ret_addr()
s390: add error handling to perf_callchain_kernel
s390: always inline current_stack_pointer()
s390/mm: add mm_pxd_folded() checks to pxd_free()
s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported
s390/mm: simplify page table helpers for large entries
s390/mm: make pmd/pud_bad() report large entries as bad
...
-----BEGIN PGP SIGNATURE-----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=ZQte
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20191111' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
enhance tracing in vfio-ccw
* tag 'vfio-ccw-20191111' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw:
vfio-ccw: Rework the io_fctl trace
vfio-ccw: Add a trace for asynchronous requests
vfio-ccw: Trace the FSM jumptable
vfio-ccw: Refactor how the traces are built
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This allows IQD drivers to send out multiple SBALs with a single SIGA
instruction.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Output interrupts are not subject to SLSB-based avoidance, so remove the
gratuitous SLSB updates for Output SBALs in ERROR state.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On an interrupt, tiqdio_thinint_handler() walks a list of all objects
that might require attention, and checks their DSCI. This list is
awkwardly built from Input Queues, even though the IRQs are per-device
and the queue is then only used to dereference its qdio_irq parent.
To simplify the logic, change the code so that tiq_list contains
qdio_irq entries.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
qperf_inc() takes a queue as input, but actually updates the statistics
in its qdio_irq parent.
In some contexts we already have access to the qdio_irq struct, and can
avoid the additional dereference.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Shift the definition of tiqdio_airq around, so that it doesn't require a
forward declaration for tiqdio_thinint_handler().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Partial EQBS completion is no significant event, and the WARN ends up
spamming the debug logs for no good reason.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
qdio.h recently gained a new helper macro that handles wrap-around on a
QDIO queue, use it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Using __field_struct for the schib is convenient, but it doesn't
appear to let us filter based on any of the schib elements.
Specifying the full schid or any element within it results
in various errors by the parser. So, expand that out to its
component elements, so we can limit the trace to a single device.
While we are at it, rename this trace to the function name, so we
remember what is being traced instead of an abstract reference to the
function control bit of the SCSW.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20191016142040.14132-5-farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Since the asynchronous requests are typically associated with
error recovery, let's add a simple trace when one of those is
issued to a device.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20191016142040.14132-4-farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It would be nice if we could track the sequence of events within
vfio-ccw, based on the state of the device/FSM and our calling
sequence within it. So let's add a simple trace here so we can
watch the states change as things go, and allow it to be folded
into the rest of the other cio traces.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20191016142040.14132-3-farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit 3cd90214b7 ("vfio: ccw: add tracepoints for interesting error
paths") added a quick trace point to determine where a channel program
failed while being processed. It's a great addition, but adding more
traces to vfio-ccw is more cumbersome than it needs to be.
Let's refactor how this is done, so that additional traces are easier
to add and can exist outside of the FSM if we ever desire.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20191016142040.14132-2-farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit 37db8985b2 ("s390/cio: add basic protected virtualization
support") breaks virtio-ccw devices with VIRTIO_F_IOMMU_PLATFORM for non
Protected Virtualization (PV) guests. The problem is that the dma_mask
of the ccw device, which is used by virtio core, gets changed from 64 to
31 bit, because some of the DMA allocations do require 31 bit
addressable memory. For PV the only drawback is that some of the virtio
structures must end up in ZONE_DMA because we have the bounce the
buffers mapped via DMA API anyway.
But for non PV guests we have a problem: because of the 31 bit mask
guests bigger than 2G are likely to try bouncing buffers. The swiotlb
however is only initialized for PV guests, because we don't want to
bounce anything for non PV guests. The first such map kills the guest.
Since the DMA API won't allow us to specify for each allocation whether
we need memory from ZONE_DMA (31 bit addressable) or any DMA capable
memory will do, let us use coherent_dma_mask (which is used for
allocations) to force allocating form ZONE_DMA while changing dma_mask
to DMA_BIT_MASK(64) so that at least the streaming API will regard
the whole memory DMA capable.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Fixes: 37db8985b2 ("s390/cio: add basic protected virtualization support")
Link: https://lore.kernel.org/lkml/20190930153803.7958-1-pasic@linux.ibm.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The QIB parm area is 128 bytes long. Current code consistently misuses
an _entirely unrelated_ QDIO constant, merely because it has the same
value. Stop doing so.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Fix 3 kasan findings.
- Add PERF_EVENT_IOC_PERIOD ioctl support.
- Add Crypto Express7S support and extend sysfs attributes for pkey.
- Minor common I/O layer documentation corrections.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl2Mj18ACgkQjYWKoQLX
FBiiowf/RnU7K+VACpZ9D1SAELvkz6z3aht4Xr22gJtzy1nHsMz2dILNPxrt1NgT
56gO8iYprQ7Mjl2/D6Mk2HbgI5cKVcyEr8hPvRA2NsUaVNOqH6HWGjn0NV4LRWGm
rGXkFvWz0639qSGiQ4KgRdJSFfMQiKWstKdKwgWwnnwmxpa7QC7P42SA9YBO3h9f
17y9JqLN1w9iKgvnGdeJlmPebi15I9jIMHaU+ebGd6EJ4AxNWOED7s1iIhAgjtNZ
jbsVzVu8luM0QNSBcK5h+4YDaYflt3zpuQg+DJcLvokVNGGaTi/RBzeJ+L81Fpgh
5HAPlaIV/xkgnqE9bG9Tr6L3NyRgug==
=Wc/P
-----END PGP SIGNATURE-----
Merge tag 's390-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix three kasan findings
- Add PERF_EVENT_IOC_PERIOD ioctl support
- Add Crypto Express7S support and extend sysfs attributes for pkey
- Minor common I/O layer documentation corrections
* tag 's390-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: exclude subchannels with no parent from pseudo check
s390/cio: avoid calling strlen on null pointer
s390/topology: avoid firing events before kobjs are created
s390/cpumf: Remove mixed white space
s390/cpum_sf: Support ioctl PERF_EVENT_IOC_PERIOD
s390/zcrypt: CEX7S exploitation support
s390/cio: fix intparm documentation
s390/pkey: Add sysfs attributes to emit AES CIPHER key blobs
ccw console is created early in start_kernel and used before css is
initialized or ccw console subchannel is registered. Until then console
subchannel does not have a parent. For that reason assume subchannels
with no parent are not pseudo subchannels. This fixes the following
kasan finding:
BUG: KASAN: global-out-of-bounds in sch_is_pseudo_sch+0x8e/0x98
Read of size 8 at addr 00000000000005e8 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc8-07370-g6ac43dd12538 #2
Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
Call Trace:
([<000000000012cd76>] show_stack+0x14e/0x1e0)
[<0000000001f7fb44>] dump_stack+0x1a4/0x1f8
[<00000000007d7afc>] print_address_description+0x64/0x3c8
[<00000000007d75f6>] __kasan_report+0x14e/0x180
[<00000000018a2986>] sch_is_pseudo_sch+0x8e/0x98
[<000000000189b950>] cio_enable_subchannel+0x1d0/0x510
[<00000000018cac7c>] ccw_device_recognition+0x12c/0x188
[<0000000002ceb1a8>] ccw_device_enable_console+0x138/0x340
[<0000000002cf1cbe>] con3215_init+0x25e/0x300
[<0000000002c8770a>] console_init+0x68a/0x9b8
[<0000000002c6a3d6>] start_kernel+0x4fe/0x728
[<0000000000100070>] startup_continue+0x70/0xd0
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix the following kasan finding:
BUG: KASAN: global-out-of-bounds in ccwgroup_create_dev+0x850/0x1140
Read of size 1 at addr 0000000000000000 by task systemd-udevd.r/561
CPU: 30 PID: 561 Comm: systemd-udevd.r Tainted: G B
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
([<0000000231b3db7e>] show_stack+0x14e/0x1a8)
[<0000000233826410>] dump_stack+0x1d0/0x218
[<000000023216fac4>] print_address_description+0x64/0x380
[<000000023216f5a8>] __kasan_report+0x138/0x168
[<00000002331b8378>] ccwgroup_create_dev+0x850/0x1140
[<00000002332b618a>] group_store+0x3a/0x50
[<00000002323ac706>] kernfs_fop_write+0x246/0x3b8
[<00000002321d409a>] vfs_write+0x132/0x450
[<00000002321d47da>] ksys_write+0x122/0x208
[<0000000233877102>] system_call+0x2a6/0x2c8
Triggered by:
openat(AT_FDCWD, "/sys/bus/ccwgroup/drivers/qeth/group",
O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0666) = 16
write(16, "0.0.bd00,0.0.bd01,0.0.bd02", 26) = 26
The problem is that __get_next_id in ccwgroup_create_dev might set "buf"
buffer pointer to NULL and explicit check for that is required.
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The common I/O layer is maintaining an "intparm" inspired by
the hardware intparm for driver usage. This "intparm" is not
only applicaple for ssch, but also for hsch/csch. The kerneldoc
states that it is only updated for hsch/csch if no prior request
is pending; however, this is not what the code does (whether
that would actually desireable is a different issue.)
Let's at least fix the kerneldoc for now.
Fixes: b2ffd8e9a7 ("[S390] cio: Add docbook comments.")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from
Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and
support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from
YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
mlxsw: spectrum: Register CPU port with devlink
mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
net: ena: fix incorrect update of intr_delay_resolution
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
net: ena: fix update of interrupt moderation register
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
net: ena: remove ena_restore_ethtool_params() and relevant fields
net: ena: remove old adaptive interrupt moderation code from ena_netdev
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
net: ena: enable the interrupt_moderation in driver_supported_features
net: ena: reimplement set/get_coalesce()
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
ethtool: implement Energy Detect Powerdown support via phy-tunable
xen-netfront: do not assume sk_buff_head list is empty in error handling
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
net: ena: don't wake up tx queue when down
drop_monitor: Better sanitize notified packets
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
- Add support for IBM z15 machines.
- Add SHA3 and CCA AES cipher key support in zcrypt and pkey refactoring.
- Move to arch_stack_walk infrastructure for the stack unwinder.
- Various kasan fixes and improvements.
- Various command line parsing fixes.
- Improve decompressor phase debuggability.
- Lift no bss usage restriction for the early code.
- Use refcount_t for reference counters for couple of places in
mm code.
- Logging improvements and return code fix in vfio-ccw code.
- Couple of zpci fixes and minor refactoring.
- Remove some outdated documentation.
- Fix secure boot detection.
- Other various minor code clean ups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl1/pRoACgkQjYWKoQLX
FBjxLQf/Y1nlmoc8URLqaqfNTczIvUzdfXuahI7L75RoIIiqHtcHBrVwauSr7Lma
XVRzK/+6q0UPISrOIZEEtQKsMMM7rGuUv/+XTyrOB/Tsc31kN2EIRXltfXI/lkb8
BZdgch4Xs2rOD7y6TvqpYJsXYXsnLMWwCk8V+48V/pok4sEgMDgh0bTQRHPHYmZ6
1cv8ZQ0AeuVxC6ChM30LhajGRPkYd8RQ82K7fU7jxT0Tjzu66SyrW3pTwA5empBD
RI2yBZJ8EXwJyTCpvN8NKiBgihDs9oUZl61Dyq3j64Mb1OuNUhxXA/8jmtnGn0ok
O9vtImCWzExhjSMkvotuhHEC05nEEQ==
=LCgE
-----END PGP SIGNATURE-----
Merge tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for IBM z15 machines.
- Add SHA3 and CCA AES cipher key support in zcrypt and pkey
refactoring.
- Move to arch_stack_walk infrastructure for the stack unwinder.
- Various kasan fixes and improvements.
- Various command line parsing fixes.
- Improve decompressor phase debuggability.
- Lift no bss usage restriction for the early code.
- Use refcount_t for reference counters for couple of places in mm
code.
- Logging improvements and return code fix in vfio-ccw code.
- Couple of zpci fixes and minor refactoring.
- Remove some outdated documentation.
- Fix secure boot detection.
- Other various minor code clean ups.
* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390: remove pointless drivers-y in drivers/s390/Makefile
s390/cpum_sf: Fix line length and format string
s390/pci: fix MSI message data
s390: add support for IBM z15 machines
s390/crypto: Support for SHA3 via CPACF (MSA6)
s390/startup: add pgm check info printing
s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
vfio-ccw: fix error return code in vfio_ccw_sch_init()
s390: vfio-ap: fix warning reset not completed
s390/base: remove unused s390_base_mcck_handler
s390/sclp: Fix bit checked for has_sipl
s390/zcrypt: fix wrong handling of cca cipher keygenflags
s390/kasan: add kdump support
s390/setup: avoid using strncmp with hardcoded length
s390/sclp: avoid using strncmp with hardcoded length
s390/module: avoid using strncmp with hardcoded length
s390/pci: avoid using strncmp with hardcoded length
s390/kaslr: reserve memory for kasan usage
s390/mem_detect: provide single get_mem_detect_end
s390/cmma: reuse kstrtobool for option value parsing
...
Fix to return negative error code -ENOMEM from the memory alloc failed
error handling case instead of 0, as done elsewhere in this function.
Fixes: 60e05d1cf0 ("vfio-ccw: add some logging")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link https://lore.kernel.org/kvm/20190904083315.105600-1-weiyongjun1@huawei.com/
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If a driver wants to use the new Output Queue poll code, then the qdio
layer must disable its internal Queue scanning. Let the driver select
this mode by passing a special scan_threshold of 0.
As the scan_threshold is the same for all Output Queues, also move it
into the main qdio_irq struct. This allows for fast opt-out checking, a
driver is expected to operate either _all_ or none of its Output Queues
in polling mode.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While commit d36deae750 ("qdio: extend API to allow polling") enhanced
the qdio layer so that drivers can poll their Input Queues, we don't
have the corresponding infrastructure for Output Queues yet.
Factor out a helper that scans a single QDIO Queue, so that qeth can
implement TX NAPI on top of it.
While doing so, remove the duplicated tracking of the next-to-scan index
(q->first_to_check vs q->first_to_kick) in this code path.
qdio_handle_aobs() needs to move slightly upwards in the code hierarchy,
so that it's still called from the polling path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Usually, the common I/O layer logs various things into the s390
cio debug feature, which has been very helpful in the past when
looking at crash dumps. As vfio-ccw devices unbind from the
standard I/O subchannel driver, we lose some information there.
Let's introduce some vfio-ccw debug features and log some things
there. (Unfortunately we cannot reuse the cio debug feature from
a module.)
Message-Id: <20190816151505.9853-2-cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add a generic helper to match any/all devices. Using this
introduce new wrappers {bus/driver/class}_find_next_device().
Cc: Elie Morisse <syniurge@gmail.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI
Link: https://lore.kernel.org/r/20190723221838.12024-7-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper to match the device name for device lookup. Also
reuse this generic exported helper for the existing bus_find_device_by_name().
and add similar variants for driver/class.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-leds@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wpan@vger.kernel.org
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190723221838.12024-2-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since vfio_ccw_async_region_ops is not exported and has no reason to be
globally visible make it static to avoid the following sparse warning:
drivers/s390/cio/vfio_ccw_async.c:73:30: warning: symbol 'vfio_ccw_async_region_ops' was not declared. Should it be static?
Fixes: d5afd5d135 ("vfio-ccw: add handling for async channel instructions")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The IQD mcast queue doesn't support QAOB mode, so skip the
qdio_enable_async_operation() setup call for this queue. This avoids
the allocation of an unneeded QAOB pointer array, and sets up q->use_cq
properly so that drivers are prohibited from using QAOBs for mcast
traffic.
Take this opportunity to streamline the q->use_cq and aob != 0 checks.
The path to qdio_siga_output() is straight-forward, we don't need to
worry about being called with bad operands.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.
Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
There is a small window where it's possible that we could be working
on an interrupt (queued in the workqueue) and setting up a channel
program (i.e allocating memory, pinning pages, translating address).
This can lead to allocating and freeing the channel program at the
same time and can cause memory corruption.
Let's not call cp_free if we are currently processing a channel program.
The only way we know for sure that we don't have a thread setting
up a channel program is when the state is set to VFIO_CCW_STATE_CP_PENDING.
Fixes: d5afd5d135 ("vfio-ccw: add handling for async channel instructions")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <62e87bf67b38dc8d5760586e7c96d400db854ebe.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We don't set cp->initialized to true so calling cp_free
will just return and not do anything.
Also fix a memory leak where we fail to free a ccwchain
on an error.
Fixes: 812271b910 ("s390/cio: Squash cp_free() and cp_unpin_free()")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <3173c4216f4555d9765eb6e4922534982bc820e4.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The comment is misleading because it tells us that
we should set orb.cmd.c64 before calling ccwchain_calc_length,
otherwise the function ccwchain_calc_length would return an
error. This is not completely accurate.
We want to allow an orb without cmd.c64, and this is fine
as long as the channel program does not use IDALs. But we do
want to reject any channel program that uses IDALs and does
not set the flag, which is what we do in ccwchain_calc_length.
After we have done the ccw processing, we need to set cmd.c64,
as we use IDALs for all translated channel programs.
Also for better code readability let's move the setting of
cmd.c64 within the non error path.
Fixes: fb9e7880af ("vfio: ccw: push down unsupported IDA check")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <f68636106aef0faeb6ce9712584d102d1b315ff8.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
- Improve stop_machine wait logic: replace cpu_relax_yield call in generic
stop_machine function with a weak stop_machine_yield function. This is
overridden on s390, which yields the current cpu to the neighbouring cpu
after a couple of retries, instead of blindly giving up the cpu to the
hipervisor. This significantly improves stop_machine performance on s390 in
overcommitted scenarios.
This includes common code changes which have been Acked by Peter Zijlstra
and Thomas Gleixner.
- Improve jump label transformation speed: transform jump labels without
using stop_machine.
- Refactoring of the vfio-ccw cp handling, simplifying the code and
avoiding unneeded allocating/copying.
- Various vfio-ccw fixes (ccw translation, state machine).
- Add support for vfio-ap queue interrupt control in the guest.
This includes s390 kvm changes which have been Acked by Christian
Borntraeger.
- Add protected virtualization support for virtio-ccw.
- Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to remove some
code which most likely isn't working at all, besides that s390 didn't even
compile for !CONFIG_SMP.
- Support for special flagged EP11 CPRBs for zcrypt.
- Handle PCI devices with no support for new MIO instructions.
- Avoid KASAN false positives in reworked stack unwinder.
- Couple of fixes for the QDIO layer.
- Convert s390 specific documentation to ReST format.
- Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if hardware is
missing. This way our modules behave like most other modules and which is
also what systemd's systemd-modules-load.service expects.
- Replace defconfig with performance_defconfig, so there is one config file
less to maintain.
- Remove the SCLP call home device driver, which was never useful.
- Cleanups all over the place.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl0iEpcACgkQjYWKoQLX
FBgtZwf8DOJ6COUG91jKP0RSDlc2YvIMBxopQ38ql1lIsTj5t6DvJ2z3X5uct1wy
6mMiF01VuyD4V4UXbTJQrihzNx7D4dUh47s2sS+diGHxJyXacVxlmjS5k+6pLIUO
AyLvtCcoqDPPiThqnSTZFRm/TcfO/25fCG/IdjrFGj1MD09wHpUCh16tmRPTGFlC
BWZeilDT77fVXnh7Ggn3JB0mQay5PAw2ODOxELHTUBaLmYF8RJPPVKBPmXGl9P1W
84ESm2p+iALGGWDiTOUad9eu8wyQci/V/R+hFgs0Bz/HRcjznNH5EVvfQNCD4VNF
g/PET10nIQYZv2BNdi0cwRjR9jCFbw==
=jp0i
-----END PGP SIGNATURE-----
Merge tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Improve stop_machine wait logic: replace cpu_relax_yield call in
generic stop_machine function with a weak stop_machine_yield
function. This is overridden on s390, which yields the current cpu to
the neighbouring cpu after a couple of retries, instead of blindly
giving up the cpu to the hipervisor. This significantly improves
stop_machine performance on s390 in overcommitted scenarios.
This includes common code changes which have been Acked by Peter
Zijlstra and Thomas Gleixner.
- Improve jump label transformation speed: transform jump labels
without using stop_machine.
- Refactoring of the vfio-ccw cp handling, simplifying the code and
avoiding unneeded allocating/copying.
- Various vfio-ccw fixes (ccw translation, state machine).
- Add support for vfio-ap queue interrupt control in the guest. This
includes s390 kvm changes which have been Acked by Christian
Borntraeger.
- Add protected virtualization support for virtio-ccw.
- Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to
remove some code which most likely isn't working at all, besides that
s390 didn't even compile for !CONFIG_SMP.
- Support for special flagged EP11 CPRBs for zcrypt.
- Handle PCI devices with no support for new MIO instructions.
- Avoid KASAN false positives in reworked stack unwinder.
- Couple of fixes for the QDIO layer.
- Convert s390 specific documentation to ReST format.
- Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if
hardware is missing. This way our modules behave like most other
modules and which is also what systemd's systemd-modules-load.service
expects.
- Replace defconfig with performance_defconfig, so there is one config
file less to maintain.
- Remove the SCLP call home device driver, which was never useful.
- Cleanups all over the place.
* tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits)
docs: s390: s390dbf: typos and formatting, update crash command
docs: s390: unify and update s390dbf kdocs at debug.c
docs: s390: restore important non-kdoc parts of s390dbf.rst
vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1
s390/pci: correctly handle MIO opt-out
s390/pci: deal with devices that have no support for MIO instructions
s390: ap: kvm: Enable PQAP/AQIC facility for the guest
s390: ap: implement PAPQ AQIC interception in kernel
vfio: ap: register IOMMU VFIO notifier
s390: ap: kvm: add PQAP interception for AQIC
s390/unwind: cleanup unused READ_ONCE_TASK_STACK
s390/kasan: avoid false positives during stack unwind
s390/qdio: don't touch the dsci in tiqdio_add_input_queues()
s390/qdio: (re-)initialize tiqdio list entries
s390/dasd: Fix a precision vs width bug in dasd_feature_list()
s390/cio: introduce driver_override on the css bus
vfio-ccw: make convert_ccw0_to_ccw1 static
vfio-ccw: Remove copy_ccw_from_iova()
vfio-ccw: Factor out the ccw0-to-ccw1 transition
vfio-ccw: Copy CCW data outside length calculation
...
When processing Format-0 CCWs, we use the "len" variable as the
number of CCWs to convert to Format-1. But that variable
contains zero here, and is not a meaningful CCW count until
ccwchain_calc_length() returns. Since that routine requires and
expects Format-1 CCWs to identify the chaining behavior, the
format conversion must be done first.
Convert the 2KB we copied even if it's more than we need.
Fixes: 7f8e89a8f2 ("vfio-ccw: Factor out the ccw0-to-ccw1 transition")
Reported-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190702180928.18113-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Current code sets the dsci to 0x00000080. Which doesn't make any sense,
as the indicator area is located in the _left-most_ byte.
Worse: if the dsci is the _shared_ indicator, this potentially clears
the indication of activity for a _different_ device.
tiqdio_thinint_handler() will then have no reason to call that device's
IRQ handler, and the device ends up stalling.
Fixes: d0c9d4a89f ("[S390] qdio: set correct bit in dsci")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When tiqdio_remove_input_queues() removes a queue from the tiq_list as
part of qdio_shutdown(), it doesn't re-initialize the queue's list entry
and the prev/next pointers go stale.
If a subsequent qdio_establish() fails while sending the ESTABLISH cmd,
it calls qdio_shutdown() again in QDIO_IRQ_STATE_ERR state and
tiqdio_remove_input_queues() will attempt to remove the queue entry a
second time. This dereferences the stale pointers, and bad things ensue.
Fix this by re-initializing the list entry after removing it from the
list.
For good practice also initialize the list entry when the queue is first
allocated, and remove the quirky checks that papered over this omission.
Note that prior to
commit e521813468 ("s390/qdio: fix access to uninitialized qdio_q fields"),
these checks were bogus anyway.
setup_queues_misc() clears the whole queue struct, and thus needs to
re-init the prev/next pointers as well.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Sometimes, we want to control which of the matching drivers
binds to a subchannel device (e.g. for subchannels we want to
handle via vfio-ccw).
For pci devices, a mechanism to do so has been introduced in
782a985d7a ("PCI: Introduce new device binding path using
pci_dev.driver_override"). It makes sense to introduce the
driver_override attribute for subchannel devices as well, so
that we can easily extend the 'driverctl' tool (which makes
use of the driver_override attribute for pci).
Note that unlike pci we still require a driver override to
match the subchannel type; matching more than one subchannel
type is probably not useful anyway.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Update __ccwdev_check_busid() and __ccwgroupdev_check_busid() to use
"const" qualifiers to fix the compiler warning.
Reported-by: kbuild test robot <lkp@intel.com>
Cc: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
code and avoiding unneeded allocating/copying.
-----BEGIN PGP SIGNATURE-----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=FcTg
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20190621' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Refactoring of the vfio-ccw cp handling, simplifying the
code and avoiding unneeded allocating/copying.
* tag 'vfio-ccw-20190621' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw:
vfio-ccw: Remove copy_ccw_from_iova()
vfio-ccw: Factor out the ccw0-to-ccw1 transition
vfio-ccw: Copy CCW data outside length calculation
vfio-ccw: Skip second copy of guest cp to host
vfio-ccw: Move guest_cp storage into common struct
s390/cio: Combine direct and indirect CCW paths
vfio-ccw: Rearrange IDAL allocation in direct CCW
vfio-ccw: Remove pfn_array_table
vfio-ccw: Adjust the first IDAW outside of the nested loops
vfio-ccw: Rearrange pfn_array and pfn_array_table arrays
s390/cio: Use generalized CCW handler in cp_init()
s390/cio: Generalize the TIC handler
s390/cio: Refactor the routine that handles TIC CCWs
s390/cio: Squash cp_free() and cp_unpin_free()
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The driver_find_device() accepts a match function pointer to
filter the devices for lookup, similar to bus/class_find_device().
However, there is a minor difference in the prototype for the
match parameter for driver_find_device() with the now unified
version accepted by {bus/class}_find_device(), where it doesn't
accept a "const" qualifier for the data argument. This prevents
us from reusing the generic match functions for driver_find_device().
For this reason, change the prototype of the driver_find_device() to
make the "match" parameter in line with {bus/class}_find_device()
and adjust its callers to use the const qualifier. Also, we could
now promote the "data" parameter to const as we pass it down
as a const parameter to the match functions.
Cc: Corey Minyard <minyard@acm.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device(). If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward. Also with that, constify
the "data" parameter as it is passed as a const to the match function.
For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just to keep things tidy.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-6-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a really useful function, but it's buried in the
copy_ccw_from_iova() routine so that ccwchain_calc_length()
can just work with Format-1 CCWs while doing its counting.
But it means we're translating a full 2K of "CCWs" to Format-1,
when in reality there's probably far fewer in that space.
Let's factor it out, so maybe we can do something with it later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-5-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It doesn't make much sense to "hide" the copy to the channel_program
struct inside a routine that calculates the length of the chain.
Let's move it to the calling routine, which will later copy from
channel_program to the memory it allocated itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-4-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We already pinned/copied/unpinned 2K (256 CCWs) of guest memory
to the host space anchored off vfio_ccw_private. There's no need
to do that again once we have the length calculated, when we could
just copy the section we need to the "permanent" space for the I/O.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-3-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rather than allocating/freeing a piece of memory every time
we try to figure out how long a CCW chain is, let's use a piece
of memory allocated for each device.
The io_mutex added with commit 4f76617378 ("vfio-ccw: protect
the I/O region") is held for the duration of the VFIO_CCW_EVENT_IO_REQ
event that accesses/uses this space, so there should be no race
concerns with another CPU attempting an (unexpected) SSCH for the
same device.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-2-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This allows device drivers (eg. qeth) to use the struct when processing
information retrieved via RCD.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With both the direct-addressed and indirect-addressed CCW paths
simplified to this point, the amount of shared code between them is
(hopefully) more easily visible. Move the processing of IDA-specific
bits into the direct-addressed path, and add some useful commentary of
what the individual pieces are doing. This allows us to remove the
entire ccwchain_fetch_idal() routine and maintain a single function
for any non-TIC CCW.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-10-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is purely deck furniture, to help understand the merge of the
direct and indirect handlers.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-9-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that both CCW codepaths build this nested array:
ccwchain->pfn_array_table[1]->pfn_array[#idaws/#pages]
We can collapse this into simply:
ccwchain->pfn_array[#idaws/#pages]
Let's do that, so that we don't have to continually navigate two
nested arrays when the first array always has a count of one.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-8-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that pfn_array_table[] is always an array of 1, it seems silly to
check for the very first entry in an array in the middle of two nested
loops, since we know it'll only ever happen once.
Let's move this outside the loops to simplify things, even though
the "k" variable is still necessary.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-7-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While processing a channel program, we currently have two nested
arrays that carry a slightly different structure. The direct CCW
path creates this:
ccwchain->pfn_array_table[1]->pfn_array[#pages]
while an IDA CCW creates:
ccwchain->pfn_array_table[#idaws]->pfn_array[1]
The distinction appears to state that each pfn_array_table entry
points to an array of contiguous pages, represented by a pfn_array,
um, array. Since the direct-addressed scenario can ONLY represent
contiguous pages, it makes the intermediate array necessary but
difficult to recognize. Meanwhile, since an IDAL can contain
non-contiguous pages and there is no logic in vfio-ccw to detect
adjacent IDAWs, it is the second array that is necessary but appearing
to be superfluous.
I am not aware of any documentation that states the pfn_array[] needs
to be of contiguous pages; it is just what the code does today.
I don't see any reason for this either, let's just flip the IDA
codepath around so that it generates:
ch_pat->pfn_array_table[1]->pfn_array[#idaws]
This will bring it in line with the direct-addressed codepath,
so that we can understand the behavior of this memory regardless
of what type of CCW is being processed. And it means the casual
observer does not need to know/care whether the pfn_array[]
represents contiguous pages or not.
NB: The existing vfio-ccw code only supports 4K-block Format-2 IDAs,
so that "#pages" == "#idaws" in this area. This means that we will
have difficulty with this overlap in terminology if support for
Format-1 or 2K-block Format-2 IDAs is ever added. I don't think that
this patch changes our ability to make that distinction.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-6-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is now pretty apparent that ccwchain_handle_ccw()
(nee ccwchain_handle_tic()) does everything that cp_init()
wants to do.
Let's remove that duplicated code from cp_init() and let
ccwchain_handle_ccw() handle it itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Refactor ccwchain_handle_tic() into a routine that handles a channel
program address (which itself is a CCW pointer), rather than a CCW pointer
that is only a TIC CCW. This will make it easier to reuse this code for
other CCW commands.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Extract the "does the target of this TIC already exist?" check from
ccwchain_handle_tic(), so that it's easier to refactor that function
into one that cp_init() is able to use.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The routine cp_free() does nothing but call cp_unpin_free(), and while
most places call cp_free() there is one caller of cp_unpin_free() used
when the cp is guaranteed to have not been marked initialized.
This seems like a dubious way to make a distinction, so let's combine
these routines and make cp_free() do all the work.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Protected virtualization guests have to use shared pages for airq
notifier bit vectors, because the hypervisor needs to write these bits.
Let us make sure we allocate DMA memory for the notifier bit vectors by
replacing the kmem_cache with a dma_cache and kalloc() with
cio_dma_zalloc().
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
As virtio-ccw devices are channel devices, we need to use the
dma area within the common I/O layer for any communication with
the hypervisor.
Note that we do not need to use that area for control blocks
directly referenced by instructions, e.g. the orb.
It handles neither QDIO in the common code, nor any device type specific
stuff (like channel programs constructed by the DASD driver).
An interesting side effect is that virtio structures are now going to
get allocated in 31 bit addressable storage.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
To support protected virtualization cio will need to make sure the
memory used for communication with the hypervisor is DMA memory.
Let us introduce one global pool for cio.
Our DMA pools are implemented as a gen_pool backed with DMA pages. The
idea is to avoid each allocation effectively wasting a page, as we
typically allocate much less than PAGE_SIZE.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
When a CQ-enabled device uses QEBSM for SBAL state inspection,
get_buf_states() can return the PENDING state for an Output Queue.
get_outbound_buffer_frontier() isn't prepared for this, and any PENDING
buffer will permanently stall all further completion processing on this
Queue.
This isn't a concern for non-QEBSM devices, as get_buf_states() for such
devices will manually turn PENDING buffers into EMPTY ones.
Fixes: 104ea556ee ("qdio: support asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Add missing parameter description to fix the following warning:
drivers/s390/cio/qdio_thinint.c:183: warning:
Function parameter or member 'floating' not described in 'tiqdio_thinint_handler'
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
If the CCW being processed is a No-Operation, then by definition no
data is being transferred. Let's fold those checks into the normal
CCW processors, rather than skipping out early.
Likewise, if the CCW being processed is a "test" (a category defined
here as an opcode that contains zero in the lowest four bits) then no
special processing is necessary as far as vfio-ccw is concerned.
These command codes have not been valid since the S/370 days, meaning
they are invalid in the same way as one that ends in an eight [1] or
an otherwise valid command code that is undefined for the device type
in question. Considering that, let's just process "test" CCWs like
any other CCW, and send everything to the hardware.
[1] POPS states that a x08 is a TIC CCW, and that having any high-order
bits enabled is invalid for format-1 CCWs. For format-0 CCWs, the
high-order bits are ignored.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-4-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is possible that a guest might issue a CCW with a length of zero,
and will expect a particular response. Consider this chain:
Address Format-1 CCW
-------- -----------------
0 33110EC0 346022CC 33177468
1 33110EC8 CF200000 3318300C
CCW[0] moves a little more than two pages, but also has the
Suppress Length Indication (SLI) bit set to handle the expectation
that considerably less data will be moved. CCW[1] also has the SLI
bit set, and has a length of zero. Once vfio-ccw does its magic,
the kernel issues a start subchannel on behalf of the guest with this:
Address Format-1 CCW
-------- -----------------
0 021EDED0 346422CC 021F0000
1 021EDED8 CF240000 3318300C
Both CCWs were converted to an IDAL and have the corresponding flags
set (which is by design), but only the address of the first data
address is converted to something the host is aware of. The second
CCW still has the address used by the guest, which happens to be (A)
(probably) an invalid address for the host, and (B) an invalid IDAW
address (doubleword boundary, etc.).
While the I/O fails, it doesn't fail correctly. In this example, we
would receive a program check for an invalid IDAW address, instead of
a unit check for an invalid command.
To fix this, revert commit 4cebc5d6a6 ("vfio: ccw: validate the
count field of a ccw before pinning") and allow the individual fetch
routines to process them like anything else. We'll make a slight
adjustment to our allocation of the pfn_array (for direct CCWs) or
IDAL (for IDAL CCWs) memory, so that we have room for at least one
address even though no guest memory will be pinned and thus the
IDAW will not be populated with a host address.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-3-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The skip flag of a CCW offers the possibility of data not being
transferred, but is only meaningful for certain commands.
Specifically, it is only applicable for a read, read backward, sense,
or sense ID CCW and will be ignored for any other command code
(SA22-7832-11 page 15-64, and figure 15-30 on page 15-75).
(A sense ID is xE4, while a sense is x04 with possible modifiers in the
upper four bits. So we will cover the whole "family" of sense CCWs.)
For those scenarios, since there is no requirement for the target
address to be valid, we should skip the call to vfio_pin_pages() and
rely on the IDAL address we have allocated/built for the channel
program. The fact that the individual IDAWs within the IDAL are
invalid is fine, since they aren't actually checked in these cases.
Set pa_nr to zero when skipping the pfn_array_pin() call, since it is
defined as the number of pages pinned and is used to determine
whether to call vfio_unpin_pages() upon cleanup.
The pfn_array_pin() routine returns the number of pages that were
pinned, but now might be skipped for some CCWs. Thus we need to
calculate the expected number of pages ourselves such that we are
guaranteed to allocate a reasonable number of IDAWs, which will
provide a valid address in CCW.CDA regardless of whether the IDAWs
are filled in with pinned/translated addresses or not.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516161403.79053-2-farman@linux.ibm.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's initialize the host address to something that is invalid,
rather than letting it default to zero. This just makes it easier
to notice when a pin operation has failed or been skipped.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-5-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The pfn_array_alloc_pin routine is doing too much. Today, it does the
alloc of the pfn_array struct and its member arrays, builds the iova
address lists out of a contiguous piece of guest memory, and asks vfio
to pin the resulting pages.
Let's effectively revert a significant portion of commit 5c1cfb1c39
("vfio: ccw: refactor and improve pfn_array_alloc_pin()") such that we
break pfn_array_alloc_pin() into its component pieces, and have one
routine that allocates/populates the pfn_array structs, and another
that actually pins the memory. In the future, we will be able to
handle scenarios where pinning memory isn't actually appropriate.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-4-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Otherwise, the guest can believe it's okay to start another I/O
and bump into the non-idle state. This results in a cc=2 (with
the asynchronous CSCH/HSCH code) returned to the guest, which is
unfortunate since everything is otherwise working normally.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20190514234248.36203-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Per the POPs [1], when processing an interrupt the SCSW.CPA field of an
IRB generally points to 8 bytes after the last CCW that was executed
(there are exceptions, but this is the most common behavior).
In the case of an error, this points us to the first un-executed CCW
in the chain. But in the case of normal I/O, the address points beyond
the end of the chain. While the guest generally only cares about this
when possibly restarting a channel program after error recovery, we
should convert the address even in the good scenario so that we provide
a consistent, valid, response upon I/O completion.
[1] Figure 16-6 in SA22-7832-11. The footnotes in that table also state
that this is true even if the resulting address is invalid or protected,
but moving to the end of the guest chain should not be a surprise.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190514234248.36203-2-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When get_buf_states() gets called with count > 1, it scans the
corresponding number of SBAL states until it encounters a mismatch.
But when these SBALs are in a HW-owned state, the callers don't actually
care _how many_ such SBALs are on the queue. If we can't process the
first SBAL, we can't process any of the following SBALs either. So when
the first SBAL is HW-owned, skip the scan of the remaining SBALs and
thus save some CPU time.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For a 1-SBAL state inspection, use the corresponding helper.
No functional change, just reducing the number of immediate callers to
get_buf_states().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Old code restricted the number of inspected SBALs to
QDIO_MAX_BUFFERS_PER_Q - 1, as otherwise the first_to_check and
first_to_kick cursors could overlap. Subsequent code would then assume that
there was no progress on the queue, when in fact _all_ SBALs on the queue
were ready-to-process.
This limitation no longer applies, so allow the queue-scan code to inspect
all SBALs on the queue. Note that qeth requires an additional patch
("s390/qeth: stop/wake TX queues based on their fill level"), to avoid
potential queue stalls when all 128 SBALs are reported as ready-to-process.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Since commit d485235b00 "s390: assume diag308 set always works",
the kernel does not use the rchp instruction anymore. So let's
remove the tracing for it.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Improve /proc/interrupts on s390 to show statistics for individual
MSI interrupts.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Provide the ability to create cachesize aligned interrupt vectors.
These will be used for per-CPU interrupt vectors.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add an extra parameter for airq handlers to recognize
floating vs. directed interrupts.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The quiesce function calls cio_cancel_halt_clear() and if we
get an -EBUSY we go into a loop where we:
- wait for any interrupts
- flush all I/O in the workqueue
- retry cio_cancel_halt_clear
During the period where we are waiting for interrupts or
flushing all I/O, the channel subsystem could have completed
a halt/clear action and turned off the corresponding activity
control bits in the subchannel status word. This means the next
time we call cio_cancel_halt_clear(), we will again start by
calling cancel subchannel and so we can be stuck between calling
cancel and halt forever.
Rather than calling cio_cancel_halt_clear() immediately after
waiting, let's try to disable the subchannel. If we succeed in
disabling the subchannel then we know nothing else can happen
with the device.
Suggested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <4d5a4b98ab1b41ac6131b5c36de18b76c5d66898.1555449329.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When releasing the vfio-ccw mdev, we currently do not release
any existing channel program and its pinned pages. This can
lead to the following warning:
[1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1]
....
1038876.561921] Call Trace:
[1038876.561935] ([<00000009897fb870>] 0x9897fb870)
[1038876.561949] [<000003ff8013bf62>] vfio_iommu_type1_detach_group+0xda/0x2f0 [vfio_iommu_type1]
[1038876.561965] [<000003ff8007b634>] __vfio_group_unset_container+0x64/0x190 [vfio]
[1038876.561978] [<000003ff8007b87e>] vfio_group_put_external_user+0x26/0x38 [vfio]
[1038876.562024] [<000003ff806fc608>] kvm_vfio_group_put_external_user+0x40/0x60 [kvm]
[1038876.562045] [<000003ff806fcb9e>] kvm_vfio_destroy+0x5e/0xd0 [kvm]
[1038876.562065] [<000003ff806f63fc>] kvm_put_kvm+0x2a4/0x3d0 [kvm]
[1038876.562083] [<000003ff806f655e>] kvm_vm_release+0x36/0x48 [kvm]
[1038876.562098] [<00000000003c2dc4>] __fput+0x144/0x228
[1038876.562113] [<000000000016ee82>] task_work_run+0x8a/0xd8
[1038876.562125] [<000000000014c7a8>] do_exit+0x5d8/0xd90
[1038876.562140] [<000000000014d084>] do_group_exit+0xc4/0xc8
[1038876.562155] [<000000000015c046>] get_signal+0x9ae/0xa68
[1038876.562169] [<0000000000108d66>] do_signal+0x66/0x768
[1038876.562185] [<0000000000b9e37e>] system_call+0x1ea/0x2d8
[1038876.562195] 2 locks held by qemu-system-s39/144727:
[1038876.562205] #0: 00000000537abaf9 (&container->group_lock){++++}, at: __vfio_group_unset_container+0x3c/0x190 [vfio]
[1038876.562230] #1: 00000000670008b5 (&iommu->lock){+.+.}, at: vfio_iommu_type1_detach_group+0x36/0x2f0 [vfio_iommu_type1]
[1038876.562250] Last Breaking-Event-Address:
[1038876.562262] [<000003ff8013aa24>] vfio_sanity_check_pfn_list+0x3c/0x70 [vfio_iommu_type1]
[1038876.562272] irq event stamp: 4236481
[1038876.562287] hardirqs last enabled at (4236489): [<00000000001cee7a>] console_unlock+0x6d2/0x740
[1038876.562299] hardirqs last disabled at (4236496): [<00000000001ce87e>] console_unlock+0xd6/0x740
[1038876.562311] softirqs last enabled at (4234162): [<0000000000b9fa1e>] __do_softirq+0x556/0x598
[1038876.562325] softirqs last disabled at (4234153): [<000000000014e4cc>] irq_exit+0xac/0x108
[1038876.562337] ---[ end trace 6c96d467b1c3ca06 ]---
Similarly we do not free the channel program when we are removing
the vfio-ccw device. Let's fix this by resetting the device and freeing
the channel program and pinned pages in the release path. For the remove
path we can just quiesce the device, since in the remove path the mediated
device is going away for good and so we don't need to do a full reset.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <ae9f20dc8873f2027f7b3c5d2aaa0bdfe06850b8.1554756534.git.alifm@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add a region to the vfio-ccw device that can be used to submit
asynchronous I/O instructions. ssch continues to be handled by the
existing I/O region; the new region handles hsch and csch.
Interrupt status continues to be reported through the same channels
as for ssch.
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The vfio-ccw code will need this, and it matches treatment of ssch
and csch.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Allow to extend the regions used by vfio-ccw. The first user will be
handling of halt and clear subchannel.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
