In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250611-restricted-pointers-remoteproc-v1-1-f059097ba663@linutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The release_tsp() implementations in the TI K3 R5, DSP and M4 remoteproc
drivers release the TI-SCI processor control of a remote processor,
which is auto triggered upon device removal.
Refactor these functions into ti_k3_common.c driver as k3_release_tsp()
and use this common function throughout in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-37-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The reserved_mem_init() implementations in the R5, DSP and M4 remoteproc
drivers initialize the reserved memory regions associated with the
remote processor.
Refactor these functions into the ti_k3_common.c driver as
k3_reserved_mem_init() and use this common function throughout in R5,
DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-36-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The mem_release() implementations in the TI K3 R5, DSP and M4 remoteproc
drivers release the reserved memory of the device, which get auto
triggered upon device removal.
Refactor these functions into ti_k3_common.c driver as k3_mem_release()
and use this common function in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-35-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The of_get_memories() implementations in the TI K3 R5, DSP and M4
remoteproc drivers initialize and assign memory regions used by the
remote processor in the same way. Refactor these implementations into
ti_k3_common.c driver as k3_rproc_of_get_memories() use this common
function for mem initialization in R5, DSP and M4 drivers.
Note: The TCM addresses for R5 core are configurable based on the
'loczrama' setting. Therefore, override the bus_addr assignment done by
the common function for TCMs of R5 remote processors by reading the
'loczrama' DT property in k3_r5_core_of_get_internal_memories().
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-34-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .da_to_va rproc ops implementations in TI K3 R5, DSP and M4
remoteproc drivers return the Kernel virtual address for a
corresponding rproc device address.
Refactor the implementations into the ti_k3_common.c driver as
k3_rproc_da_to_va and use this common function for address translation
of DDR and internal memory regions in R5, DSP and M4 drivers.
Note: The R5 SRAM memory translations are still handled in the .da_to_va
ops of the R5 remoteproc driver.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-33-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .get_loaded_rsc_table rproc ops implementations in TI K3 R5, DSP and
M4 remoteproc drivers return a pointer to the resource table that was
pre-loaded at the base address of the DDR region reserved for firmware
usage.
Refactor the implementations into ti_k3_common.c driver as
k3_get_loaded_rsc_table() and register this common function as
.get_loaded_rsc_table ops in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-32-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .detach rproc ops implementations in TI K3 R5, DSP and M4
remoteproc drivers are NOPs. Refactor the implementations into
ti_k3_common.c driver as k3_rproc_detach() and register this common
function as .detach ops in R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-31-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .attach rproc ops implementations in TI K3 R5, DSP and M4 drivers
are NOPs. Refactor the implementations into ti_k3_common.c driver
as k3_rproc_attach() and register this common function as .attach ops in
R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-30-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The rproc_request_mbox() implementations in TI K3 R5, DSP and M4
remoteproc drivers acquire the mailbox channel and send the same message
through the acquired channel.
Refactor the above function into the ti_k3_common.c driver as
k3_rproc_request_mbox() and use it throughout R5, DSP and M4 drivers.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-23-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .kick rproc ops implementations in TI K3 R5, DSP and M4 remoteproc
drivers sends a mailbox message to the remote processor in the same
way. Refactor the implementations into a common function
'k3_rproc_kick()' in the ti_k3_common.c driver.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-15-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The mailbox .rx_callback implementations in TI K3 R5, DSP and M4
remoteproc drivers handle inbound mailbox messages in the same way.
Introduce a common driver 'ti_k3_common.c' and refactor the
implementations into a common function 'k3_rproc_mbox_callback'() in it.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-14-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The TI K3 R5, DSP and M4 remoteproc drivers share the same data
structure definitions. Refactor the shared data structures into a new
common header file, 'ti_k3_common.h', and update the drivers to use the
unified data structures.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-13-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The ti_k3_r5_remoteproc.c driver previously hardcoded device memory
region addresses and names. Change this to use the k3_r5_rproc_mem_data
structure to store memory information. This aligns with K3 DSP and M4
drivers, and can be refactored out later.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-9-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Currently, struct members such as mem, num_mems, reset, tsp, ti_sci and
ti_sci_id are part of the k3_r5_core structure. To align the rproc->priv
data structure of the R5 remote processor with that of the DSP and M4,
move the above members from k3_r5_core to k3_r5_rproc struct.
Additionally, introduce a void *priv pointer in k3_r5_rproc that can be
typecasted to point to the k3_r5_core structure. This abstraction is
done to ensure common functionalities across R5, DSP and M4 drivers can
be refactored at a later stage.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-8-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The TI-SCI processor control handle, 'tsp', will be refactored from
k3_r5_core struct into k3_r5_rproc struct in a future commit. So, the
'tsp' pointer will be initialized inside k3_r5_cluster_rproc_init() now.
Move the k3_r5_release_tsp() function, which releases the tsp handle,
above k3_r5_cluster_rproc_init(), so that the later can register the
former as a devm action.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-7-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The internal memory struct pointer, 'mem', will be refactored from
k3_r5_core struct into k3_r5_rproc struct in a future commit.
Therefore, move the internal memory initialization function,
k3_r5_core_of_get_internal_memories() above k3_r5_cluster_rproc_init()
so that the former can be invoked by the later.
While at it, also re-order the k3_r5_core_of_get_sram_memories() to keep
all the internal memory initialization functions at one place.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-6-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The existing implementation of the waiting mechanism in
"k3_r5_cluster_rproc_init()" waits for the "released_from_reset" flag to
be set as part of the firmware boot process in "k3_r5_rproc_start()".
The "k3_r5_cluster_rproc_init()" function is invoked in the probe
routine which causes unexpected failures in cases where the firmware is
unavailable at boot time, resulting in probe failure and removal of the
remoteproc handles in the sysfs paths.
To address this, the waiting mechanism is refactored out of the probe
routine into the appropriate "k3_r5_rproc_{prepare/unprepare}()"
functions. This allows the probe routine to complete without depending
on firmware booting, while still maintaining the required
power-synchronization between cores.
Further, this wait mechanism is dropped from
"k3_r5_rproc_{start/stop}()" functions as they deal with Core Run/Halt
operations, and as such, there is no constraint in Running or Halting
the cores of a cluster in order.
Fixes: 61f6f68447 ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-4-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Commit f3f11cfe89 ("remoteproc: k3-r5: Acquire mailbox handle during
probe routine") introduced a check in the "k3_r5_rproc_mbox_callback()"
and "k3_r5_rproc_kick()" callbacks, causing them to exit if the remote
core's state is "RPROC_DETACHED". However, the "__rproc_attach()"
function that is responsible for attaching to a remote core, updates
the state of the remote core to "RPROC_ATTACHED" only after invoking
"rproc_start_subdevices()".
The "rproc_start_subdevices()" function triggers the probe of the Virtio
RPMsg devices associated with the remote core, which require that the
"k3_r5_rproc_kick()" and "k3_r5_rproc_mbox_callback()" callbacks are
functional. Hence, drop the check in the callbacks.
Fixes: f3f11cfe89 ("remoteproc: k3-r5: Acquire mailbox handle during probe routine")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed action to release tsp ti_sci_proc handle.
This helps prevent mistakes like releasing out of order in cleanup
functions and forgetting to release on error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-6-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use device lifecycle managed devm_rproc_add() helper function. This
helps prevent mistakes like deleting out of order in cleanup functions
and forgetting to delete on all error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-5-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed ioremap helper function. This helps
prevent mistakes like unmapping out of order in cleanup functions and
forgetting to unmap on all error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-4-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed action to free memory. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting
to free on error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed action to release reserved memory. This
helps prevent mistakes like releasing out of order in cleanup functions
and forgetting to release on error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241219110545.1898883-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
These memory regions are mapped as Normal Non-Cached which on
does not have the normal IO address space limitations and so this
cast is safe. Add '__force' to explicitly specify that the cast is
intentional to remove a sparse check warning.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241021204557.929823-2-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
While it should be safe to use normal memset() on these memories as they
are mapped as Normal Non-Cached, using the memset_io() provides stronger
guarantees on access alignment and fixes a sparse check warning. Switch
to memset_io() here.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20241021204557.929823-1-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
An of_node_put(rmem_np) call was immediately used after a pointer check
for a of_reserved_mem_lookup() call in three function implementations.
Thus call such a function only once instead directly before the checks.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/c46b06f9-72b1-420b-9dce-a392b982140e@web.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
By simply bailing out, the driver was violating its rule and internal
assumptions that either both or no rproc should be initialized. E.g.,
this could cause the first core to be available but not the second one,
leading to crashes on its shutdown later on while trying to dereference
that second instance.
Fixes: 61f6f68447 ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/9f481156-f220-4adf-b3d9-670871351e26@siemens.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Few times, core1 was scheduled to boot first before core0, which leads
to error:
'k3_r5_rproc_start: can not start core 1 before core 0'.
This was happening due to some scheduling between prepare and start
callback. The probe function waits for event, which is getting
triggered by prepare callback. To avoid above condition move event
trigger to start instead of prepare callback.
Fixes: 61f6f68447 ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
[ Applied wakeup event trigger only for Split-Mode booted rprocs ]
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820105004.2788327-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Building the TSP structure is common for users of the TI-SCI processor
control interface. Factor out this function and put it with the rest
of the TI-SCI processor control functions.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240802152109.137243-3-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acquire the mailbox handle during device probe and do not release handle
in stop/detach routine or error paths. This removes the redundant
requests for mbox handle later during rproc start/attach. This also
allows to defer remoteproc driver's probe if mailbox is not probed yet.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting
to free on error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
ret variable was used to test reset status, get from
reset_control_status() call. But this variable was overwritten by
ti_sci_proc_get_status() a few lines bellow.
And as ti_sci_proc_get_status() returns 0 or a negative value (in this
latter case, followed by a return), the expression !ret was always true,
Clearly, this was not what was intended:
In the comment above it's said that "requires both local and module
resets to be deasserted"; if reset_control_status() returns 0 it means
that the reset line is deasserted.
So, it's pretty clear that the return value of reset_control_status()
was intended to be used instead of ti_sci_proc_get_status() return
value.
This could lead in an incorrect IPC-only mode detection if reset line is
asserted (so reset_control_status() return > 0) and c_state != 0 and
halted == 0.
In this case, the old code would have detected an IPC-only mode instead
of a mismatched mode.
Fixes: 1168af40b1 ("remoteproc: k3-r5: Add support for IPC-only mode for all R5Fs")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20240621150058.319524-2-richard.genoud@bootlin.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In case of errors during core start operation from sysfs, the driver
directly returns with the -EPERM error code. Fix this to ensure that
mailbox channels are freed on error before returning by jumping to the
'put_mbox' error handling label. Similarly, jump to the 'out' error
handling label to return with required -EPERM error code during the
core stop operation from sysfs.
Fixes: 3c8a9066d5 ("remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240506141849.1735679-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
PSC controller has a limitation that it can only power-up the second
core when the first core is in ON state. Power-state for core0 should be
equal to or higher than core1.
Therefore, prevent core1 from powering up before core0 during the start
process from sysfs. Similarly, prevent core0 from shutting down before
core1 has been shut down from sysfs.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
PSC controller has a limitation that it can only power-up the second core
when the first core is in ON state. Power-state for core0 should be equal
to or higher than core1, else the kernel is seen hanging during rproc
loading.
Make the powering up of cores sequential, by waiting for the current core
to power-up before proceeding to the next core, with a timeout of 2sec.
Add a wait queue event in k3_r5_cluster_rproc_init call, that will wait
for the current core to be released from reset before proceeding with the
next core.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174935.4063513-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
AM62 and AM62A SoCs use single core R5F which is a new scenario
different than the one being used with CLUSTER_MODE_SINGLECPU which is
for utilizing a single core from a set of cores available in R5F cluster
present in the SoC.
To support this single core scenario map it with newly defined
CLUSTER_MODE_SINGLECORE and use it when compatible is set to
ti,am62-r5fss.
Also set PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE config for
CLUSTER_MODE_SINGLECORE too as it is required by R5 core when it is
being as general purpose core instead of device manager.
For IPC-only mode when config flag PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE
is set, skip overriding to CLUSTER_MODE_SINGLECPU when
CLUSTER_MODE_SINGLECORE is set as same flag is applicable for single
core configuration too.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20230327152832.923480-4-devarsht@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Check the validity of mode against SoC supported modes right
at the probe to minimize the usage of same check further in the code.
Set default value of cluster-mode only if cluster-mode device tree property
is empty.
In case devicetree provided cluster-mode property is invalid For e.g. using
CLUSTER_MODE_SINGLECPU on any SoC other than am64x then return error.
If firmware has set the PROC_BOOT_STATUS_FLAG_R5_SINGLECORE_ONLY flag then
what it means is that only CLUSTER_MODE_SINGLECPU is possible to use [1]
and hence there is no need to check for soc_data->single_cpu_mode first and
then checking cluster mode.
PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE flag can be set directly for
CLUSTER_MODE_SINGLECPU without checking for soc_data->single_cpu_mode since
that check has already been done during probe.
For IPC-only mode, directly override cluster mode as per config flag set by
bootloader without checking for soc specific data. This because config
flag would already have been validated by firmware when bootloader was
setting it.
Link:
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/security/PROC_BOOT.html?highlight=singlecore_only#arm-r5
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20230327152832.923480-2-devarsht@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20220605083334.23942-1-linmq006@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add support to the K3 R5F remoteproc driver to configure all the R5F
cores to be either in IPC-only mode or the traditional remoteproc mode.
The IPC-only mode expects that the remote processors are already booted
by the bootloader, and only performs the minimum steps required to
initialize and deinitialize the virtio IPC transports. The remoteproc
mode allows the kernel remoteproc driver to do the regular load and
boot and other device management operations for a R5F core.
The IPC-only mode for a R5F core is detected and configured at driver
probe time by querying the System Firmware for the R5F power and reset
state and/or status and making sure that the R5F core is indeed started
by the bootloaders, otherwise the device is configured for remoteproc
mode.
Support for IPC-only mode is achieved through .attach(), .detach() and
.get_loaded_rsc_table() callback ops and zeroing out the regular rproc
ops .prepare(), .unprepare(), .start() and .stop(). The resource table
follows a design-by-contract approach and is expected to be at the base
of the DDR firmware region reserved for each remoteproc, it is mostly
expected to contain only the virtio device and trace resource entries.
NOTE:
The driver cannot configure a R5F core for remoteproc mode by any
means without rebooting the kernel if that R5F core has been started
by a bootloader. This is the current desired behavior and can be
enhanced in the future if the feature is needed.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220213201246.25952-4-s-anna@ti.com
Refactor out the mailbox request and associated ping logic code
from k3_r5_rproc_start() function into its own separate function
so that it can be re-used in the soon to be added .attach() ops
callback.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220213201246.25952-3-s-anna@ti.com
The K3 J721S2 SoCs have three dual-core R5F subsystems, one in MCU voltage
domain and the other two in MAIN voltage domain. These R5F clusters are
similar to the R5F clusters in J7200 SoCs.
Compatible Info is updated to support J721S2 SoCs.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20211122122726.8532-5-hnagalla@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The K3 AM64x SoC family has a revised R5F sub-system and contains a
subset of the R5F clusters present on J721E SoCs. The K3 AM64x SoCs
only have two dual-core Arm R5F clusters/subsystems with 2 R5F cores
each present within the MAIN voltage domain (MAIN_R5FSS0 & MAIN_R5FSS1).
The revised IP has the following distinct features:
1. The R5FSS IP supports a new "Single-CPU" mode instead of the LockStep
mode on existing SoCs (AM65x, J721E or J7200). This mode is similar
to LockStep-mode on J7200 SoCs in terms of TCM usage without the
fault-tolerant safety feature provided by the LockStep mode.
The Core1 TCMs are combined with the Core0 TCMs effectively doubling
the amount of TCMs available in Single-CPU mode. The LockStep-mode
on previous AM65x and J721E SoCs could only use the Core0 TCMs. These
combined TCMs appear contiguous at the respective Core0 TCM addresses.
The code though is executed only on a single CPU (on Core0), and as
such, requires the halt signal to be programmed only for Core0, while
the resets need to be managed for both the cores.
2. TCMs are auto-initialized during module power-up, and the behavior
is programmable through a MMR bit. This feature is the same as on
the recent J7200 SoCs.
Extend the support to these clusters in the K3 R5F remoteproc driver
using AM64x specific compatibles. New TI-SCI flags and a unique cluster
mode are also needed for the cluster mode detection on these SoCs. The
reset assert and deassert sequence of both the cores in Single-CPU mode
is agnostic of the order, so the same LockStep reset and release sequences
are re-used.
The integration of these clusters is very much similar to existing SoCs
otherwise.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210327143117.1840-3-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Introduce an extra parameter is_iomem to da_to_va, then the caller
could take the memory as normal memory or io mapped memory.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-5-git-send-email-peng.fan@oss.nxp.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The J7200 SoCs have a revised R5FSS IP that adds a unique feature w.r.t
TCM sizing. Each R5F core in a cluster typically has 32 KB each of ATCM
and BTCM, with only the Core0 TCMs usable in LockStep mode. This revised
IP however doubles the total available TCM in LockStep mode by making the
Core1 TCM visible immediately after the corresponding Core0 TCM.
The R5F DT nodes on the J7200 SoCs define double (64 KB) the normal TCM
size (32 KB) for R5F Core0 for each of ATCM and BTCM to represent the
above. This increased TCM memory is only usable in LockStep-mode, and
has to be adjusted to the normal 32 KB size in Split mode. Enhance the
TI K3 R5F remoteproc for this logic through a new function. The adjustment
is a no-op on prior SoCs and relies on the correct DTS node sizes in
LockStep-mode on applicable SoCs.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20201119010531.21083-4-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
