i2c-core updates (collected by Wolfram)
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi)
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz)
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmfoBuwACgkQFA3kzBSg
KbZ+xg/9EEJIae2OVU1o7Ea4kPeyQEdLd2c6wjdrBWRdKuMcBMXR5y16yNI73bWZ
greZpQDM3AQDNDoJQRe0502pjY/IzVmG6cgDqEdkI0/9x09e2Tk4UJacJttWbcS1
eCvfvn+yIC2XFoDH/kQozoxSnADXF7yA4XFjF0ljosk+kbtTj6VYV4P0iOkyTaM6
yWiU55X7x6S6P4pLtY+KByTFEfwV5YLBIJZv4U7sGR+XghUkFfa5mg3ZfblKDIe3
7SU1XLwSpLbLDf5xn1GMJEHZoq+Glqvrg32TSwbPcV6Aqf67LGXcTvUd+lPxWDsk
rrpylo4XCfSgBn26NuCJBVWXmtraa1QEKrKvNw+7jIakxJ32YuAo/Lvc2Jk3KMcy
bdOLR3C5RXNJAE2QDgsIspp3VJSMk43aeLhJm/zATu4sEjOUc0tNwQueXeuVXbp2
X9wX9ErPBpwn9f2jCZ1+v4vRbQbmQZREo6xVzNUd/AJf3muthKBP7tLokxq9pNlx
q/x6N4PGy+x9MFT8BIwNgPpP4i8bVtWh+RJL68jh3WQoqNigkDGD0qmO/MZkHUeW
n+pdI1MpoMaB+BH3HmWuTCOMYGNo4hfdrrAhmdh3fqQRrikgEXxXp3jicRBjoih+
vSgjQ5Q4bwhHzYqRNbBWVIvgSayQKVbaLqkbWjoWdngJCOUU7Tw=
=q/EK
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
When registering a power-supply device, either a of_node or the more
recent fwnode can be supplied. Since fwnode can also contain an of_node,
let's try to get rid of it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250225-psy-core-convert-to-fwnode-v1-4-d5e4369936bb@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Get matching data in one step by switching to use i2c_get_match_data().
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
On parts where there is no status register, check the Charge End
bit to set charging/not charging status. Fullness, trickle charge
status, discharging etc. cannot be determined from just this bit.
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-6-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Some parts may not have certain control bits. These bits
however may be non-essential to the system's operation,
as the default behaviour is the one we would set anyways,
or the bits are not applicable for said part (e. g. enabling
NTC on a part without an NTC pin, or one where it cannot
be disabled via registers anyways).
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-5-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
IP53xx series supports 4.4V batteries. Add support for it
to compatible parts (that have `vbat_max` set to >= 4.4 V).
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-4-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Other parts such as IP5306 may support other battery voltages and
have different constants for input voltage regulation. Allow these
to be passed from `struct ip5xxx_regfield_config`.
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-3-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If ADC read returns an error, the return value was silently ignored,
execution continued and an uninitialized value and a return code of 0
was passed back to userspace. The only exception was
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, which bailed out correctly.
Fix returns for the other cases as well.
Fixes: 75853406fa ("power: supply: Add a driver for Injoinic power bank ICs")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20241119180741.2237692-2-csokas.bence@prolan.hu
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When current is larger than ~2A, the multiplication in current_now
property overflows and the kernel reports invalid negative current
value. Change the numerator and denominator while preserving their
ratio to allow up to +-6A before the overflow.
Fixes: 75853406fa ("power: supply: Add a driver for Injoinic power bank ICs")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Samuel Holland <samuel@sholland.org>
[use 149197/200 instead of 261095/350 as suggested by Samuel]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This driver supports several chip variants which all share the same I2C
register interface. Since the chip will turn off and become inaccessible
under conditions outside of software control (e.g. upon button press or
input voltage removal), some special handling is needed to delay the
initialization of the IC until it is accessible.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
