Avoid the GPIO controlling the avdd regulator being driven low or high
for a very short time leading to spikes by adding an enable delay of 2 ms
and a minimum off to on delay of also 2 ms.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: David Heidelberg <david@ixit.cz> # Dell Latitude 9440
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250417111337.38142-7-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is a preparation patch for registering multiple regulators, which
requires a different supply-name for each regulator. Make supply-name
a parameter to skl_int3472_register_regulator() and use con-id to set it
so that the existing int3472_gpio_map remapping can be used with it.
Since supply-name is a parameter now, drop the fixed
skl_int3472_regulator_map_supplies[] array and instead add lower- and
upper-case mappings of the passed-in supply-name to the regulator.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Tested-by: David Heidelberg <david@ixit.cz> # Dell Latitude 9440
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250417111337.38142-6-hdegoede@redhat.com
[ij: GPIO_SUPPPLY_NAME_LENGTH -> GPIO_SUPPLY_NAME_LENGTH]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rework the discrete quirk handling to use a quirks struct which is
pointed to by a dmi_system_id table, rather then having a dmi_system_id
table per type of quirk.
This is a preparation patch for adding support for multiple regulators,
where not all regulators might be shared between sensors.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: David Heidelberg <david@ixit.cz> # Dell Latitude 9440
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250417111337.38142-5-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The gpio field in struct int3472_gpio_regulator is only briefly used to
store the GPIO in skl_int3472_register_regulator(). Instead just store
the GPIO directly into cfg.ena_gpiod an drop the gpio field.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: David Heidelberg <david@ixit.cz> # Dell Latitude 9440
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250417111337.38142-4-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The supply_name field is not mandatory and is supposed to be set to
the name of another regulator when it is known that the regulator being
registered is supplied by that other regulator.
Having a regulator supplying the regulator which is being registered does
not apply to the INT3472 GPIO regulator, stop setting a supply_name.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: David Heidelberg <david@ixit.cz> # Dell Latitude 9440
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250417111337.38142-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
skl_int3472_register_dsm_clock() and skl_int3472_register_gpio_clock() are
80% the same code. Factor out the common code into a new
skl_int3472_register_clock() helper.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: David Heidelberg <david@ixit.cz> # Dell Latitude 9440
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250417111337.38142-2-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250417074648.81528-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use a faux device parent for registering the platform_profile instead of
a "fake" platform device.
The faux bus is a minimalistic, single driver bus designed for this
purpose.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-dell-faux-v1-3-ea1f1c929b7e@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The choices bitmap belongs only to this thread, therefore we can use the
non-atomic version of set_bit().
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-dell-faux-v1-2-ea1f1c929b7e@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The dell-pc module only supports the thermal management Dell SMBIOS
feature, therefore it is pointless to have it loaded if this is not
available.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-dell-faux-v1-1-ea1f1c929b7e@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add entries to unsupported WMI codes in ideapad_keymap[] and one
check for WMI code 0x13d to trigger platform_profile_cycle().
Signed-off-by: Gašper Nemgar <gasper.nemgar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250418070738.7171-1-gasper.nemgar@gmail.com
[ij: joined nested if ()s & major tweaks to changelog]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ASUS firmware resets OOBE state during S4 suspend, so the keyboard
blinks during resume from hibernation. This patch disables OOBE state
after resume from hibernation.
Signed-off-by: Pavel Nikulin <pavel@noa-labs.com>
Link: https://lore.kernel.org/r/20250418140706.1691-1-pavel@noa-labs.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Extend thermal control support to Alienware m15 R7.
Cc: stable@vger.kernel.org
Tested-by: Romain THERY <romain.thery@ik.me>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250419-m15-r7-v1-1-18c6eaa27e25@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Pantherlake ACPI device ID to the Intel HID driver.
While there, clean up the device ID table to remove the ", 0" parts.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250421041332.830136-1-saranya.gopal@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
wmax_thermal_information() may also return -ENOMSG, which would leave
`id` uninitialized in thermal_profile_probe.
Reorder and modify logic to catch all errors.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/Z_-KVqNbD9ygvE2X@stanley.mountain
Fixes: 27e9e63398 ("platform/x86: alienware-wmi: Refactor thermal control methods")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250416-smatch-fix-v1-1-35491b462d8f@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In certain situations, the sysfs for uncore may not be present when all
CPUs in a package are offlined and then brought back online after boot.
This issue can occur if there is an error in adding the sysfs entry due
to a memory allocation failure. Retrying to bring the CPUs online will
not resolve the issue, as the uncore_cpu_mask is already set for the
package before the failure condition occurs.
This issue does not occur if the failure happens during module
initialization, as the module will fail to load in the event of any
error.
To address this, ensure that the uncore_cpu_mask is not set until the
successful return of uncore_freq_add_entry().
Fixes: dbce412a77 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Signed-off-by: Shouye Liu <shouyeliu@tencent.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250417032321.75580-1-shouyeliu@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When an APU exits HW sleep with no active wake sources the Linux kernel will
rapidly assert that the APU can enter back into HW sleep. This happens in a
few ms. Contrasting this to Windows, Windows can take 10s of seconds to
enter back into the resiliency phase for Modern Standby.
For some situations this can be problematic because it can cause leakage
from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical
design guide specifications. On some designs this will trip the over
voltage protection feature (OVP) of the voltage regulator module, but it
could cause APU damage as well.
To prevent this risk, add an explicit sleep call so that future attempts
to enter into HW sleep will have enough time to settle. This will occur
while the screen is dark and only on cases that the APU should enter HW
sleep again, so it shouldn't be noticeable to any user.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ACPI byte code inside the ACPI control method responsible for
handling the WMI method calls uses a global buffer for constructing
the return value, yet the ACPI control method itself is not marked
as "Serialized".
This means that calling WMI methods on this WMI device is not
thread-safe, as concurrent WMI method calls will corrupt the global
buffer.
Fix this by serializing the WMI method calls using a mutex.
Cc: stable@vger.kernel.org # 6.x.x: 912d614ac9: platform/x86: msi-wmi-platform: Rename "data" variable
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename field 'counter' in 'mlxreg_core_hotplug_platform_data' to count.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250412091843.33943-2-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename the "data" variable inside msi_wmi_platform_read() to avoid
a name collision when the driver adds support for a state container
struct (that is to be called "data" too) in the future.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some users report the Alienware m16 R1 models, support G-Mode. This was
manually verified by inspecting their ACPI tables.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-1-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ccf395bde6 ("platform/chrome: cros_ec_proto: Allow to build as module")
allows CROS_EC_PROTO to be a module.
The config is possible to be:
- CONFIG_ACPI=y
- CONFIG_CROS_EC=m
- CONFIG_MFD_CROS_EC_DEV=m
- CONFIG_CROS_EC_PROTO=m
- CONFIG_CROS_KBD_LED_BACKLIGHT=y
As a result:
ld: vmlinux.o: in function `keyboard_led_set_brightness_ec_pwm':
cros_kbd_led_backlight.c:(.text+0x3554e4c): undefined reference to `cros_ec_cmd_xfer_status'
ld: vmlinux.o: in function `keyboard_led_get_brightness_ec_pwm':
cros_kbd_led_backlight.c:(.text+0x3554f41): undefined reference to `cros_ec_cmd_xfer_status'
The built-in code in CROS_KBD_LED_BACKLIGHT can't find symbols defined in
the module CROS_EC_PROTO.
Let A=ACPI (bool), M=MFD_CROS_EC_DEV (tristate), and
K=CROS_KBD_LED_BACKLIGHT (tristate). The possible values are:
| A | M | choice for K |
------------------------
| y | y | y/m/n |
| y | m | m/n |
| y | n | y/m/n |
| n | y | y/m/n |
| n | m | m/n |
| n | n | n |
Fix the dependencies in the Kconfig.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/chrome-platform/ed8adc69-c505-4108-bf63-92911b0395c7@infradead.org/T/#u
Fixes: ccf395bde6 ("platform/chrome: cros_ec_proto: Allow to build as module")
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250414132427.204078-3-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Remove ioremap and iounmap operations that are not needed. ioremap
and iounmap operations are handled by the caller of the pmc_add_pmt
function.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-7-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
telemetry.h header file from PMT is not needed in arl.c or mtl.c.
Remove the cross-driver include to avoid confusion.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-6-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert the index variables type to be unsigned to avoid confusion
and error.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-5-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move PMC devid definition for each PMC of Arrow Lake and Meteor
Lake platforms to core.h. This patch is a preparation step to
introduce a new SSRAM Telemetry driver which will be using the
PMC devid.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-4-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename core_ssram.c to ssram_telemetry.c. This patch is a
preparation step to introduce a new SSRAM Telemetry driver
for the SSRAM device.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-3-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move functions that implements PMC Core feature from core_ssram.c
to core.c. This patch is a preparation step to introduce a new
SSRAM Telemetry driver for the SSRAM device.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-2-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-platform-x86-v1-3-6f67e76a722c@linaro.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-platform-x86-v1-2-6f67e76a722c@linaro.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-platform-x86-v1-1-6f67e76a722c@linaro.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a debugfs interface which exposes thermal private data.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-9-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
All models with the "AWCC" WMAX device support a way of manually
controlling fans.
The PWM duty cycle of a fan can't be controlled directly. Instead the
AWCC interface let's us tune a fan `boost` value, which has the
following empirically discovered, approximate behavior over the PWM
value:
pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base)
Where the pwm_base is the locked PWM value controlled by the FW and
fan_boost is a value between 0 and 255.
Expose this fan_boost knob as a custom HWMON attribute.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-8-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
All models with the "AWCC" WMAX device support monitoring fan speed and
temperature sensors. Expose this feature through the HWMON interface.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-7-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
All models with the "AWCC" WMAX device support a "custom" thermal
profile. In some models this profile signals user-space that the user
wants to manually control the fans, which are always unlocked. In other
models it actually unlocks manual fan control.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-6-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Get and store the AWCC system description in alienware_awcc_setup()
instead of awcc_platform_profile_probe() and get the correct offset by
iterating through each member of the system_description.
Then add a debug message for unmatched profiles and replace set_bit()
with it's non-atomic version __set_bit() because the choices bitmap only
belongs to this thread.
In the process also check for a malformed system description by defining
an arbitrary limit of resource count.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-5-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename supported_thermal_profiles[] -> supported_profiles[] and change
it's type to u8 because it stores AWCC thermal IDs.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-4-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Inline all AWCC WMI helper methods and directly return the newly
introduced awcc_wmi_command() helper to simplify implementation.
Drop awcc_thermal_control() in favor of awcc_op_activate_profile().
Add awcc_op_get_resource_id(), awcc_op_get_current_profile() and a new
failure code.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-3-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename AWCC_SENSOR_ID_MASK to AWCC_SENSOR_ID_FLAG and reorder the ID
processing defines in a more logical manner. Then replace their use in
bitwise operations with FIELD_GET().
The latter also involves dropping the AWCC_SENSOR_ID_FLAG check inside
is_awcc_thermal_mode() in favor of extracting the first byte out of IDs
obtained with AWCC_OP_GET_RESOURCE_ID. This is also a requirement to add
support for Alienware Aurora desktops.
While at it, also rename is_awcc_thermal_mode() to
is_awcc_thermal_profile_id().
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-2-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The "thermal" features of the WMAX WMI device are only present on the
host device if the ACPI _UID is "AWCC". Replace WMAX prefixes with
"AWCC" to reflect this relationship.
Thermal profiles with WMAX_PROFILE_BASIC prefix are also renamed to
WMAX_PROFILE_LEGACY because they are only supported in older versions
of this WMI device.
Finally, shorten enum defines for AWCC operations from WMAX_OPERATION_*
to AWCC_OP_*.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-1-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some platforms it has been observed that STT limits are not being
applied properly causing poor performance as power limits are set too low.
STT limits that are sent to the platform are supposed to be in Q8.8
format. Convert them before sending.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Cc: stable@vger.kernel.org
Tested-by: Yijun Shen <Yijun_Shen@Dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250407181915.1482450-1-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A warning is seen when running the latest kernel on a BlueField SOC:
[251.512704] ------------[ cut here ]------------
[251.512711] invalid sysfs_emit: buf:0000000003aa32ae
[251.512720] WARNING: CPU: 1 PID: 705264 at fs/sysfs/file.c:767 sysfs_emit+0xac/0xc8
The warning is triggered because the mlxbf-bootctl driver invokes
"sysfs_emit()" with a buffer pointer that is not aligned to the
start of the page. The driver should instead use "sysfs_emit_at()"
to support non-zero offsets into the destination buffer.
Fixes: 9886f575de ("platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250407132558.2418719-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
Both are x86 ACPI tablets which ships with Android x86 as factory OS.
with a DSDT which contains a bunch of I2C devices which are not actually
there, causing various resource conflicts. Enumeration of these is skipped
through the acpi_quirk_skip_i2c_client_enumeration().
Extend the existing support for the 9V version by adding support for
manually instantiating the I2C devices which are actually present on
the 5V version by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250407092017.273124-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
Both need to be handled by the x86-android-tablets code. Add 9v to
the symbols for the existing support for the 9V Vexia EDU ATLA 10 tablet
symbols to prepare for adding support for the 5V version.
All this patch does is s/vexia_edu_atla10_info/vexia_edu_atla10_9v_info/.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250407092017.273124-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The value returned by acpi_evaluate_integer() is not checked,
but the result is not always successful, so it is necessary to
add a check of the returned value.
If the result remains negative during three iterations of the loop,
then the uninitialized variable 'val' will be used in the clamp_val()
macro, so it must be initialized with the current value of the 'curr'
variable.
In this case, the algorithm should be less noisy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b23910c219 ("asus-laptop: Pegatron Lucid accelerometer")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Link: https://lore.kernel.org/r/20250403122603.18172-1-arefev@swemel.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250327025244.1790897-1-nichen@iscas.ac.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct acpi_resource_irq` is a flexible structure --a structure
that contains a flexible-array member.
Fix the following warning:
drivers/platform/x86/sony-laptop.c:3330:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/Z-WlhL_tAP11M02G@kspp
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Allow to build ChromeOS EC communication protocol helpers as
kernel module which is particularly useful for Android GKI (Generic
Kernel Image) configuration. With this change the ChromeOS Platform
(CONFIG_CHROME_PLATFORMS=y) can be enabled directly from the vendor
kconfig fragment whithout additional configuration in gki_defconfig.
Signed-off-by: Slawomir Rosek <srosek@chromium.org>
Link: https://lore.kernel.org/r/20250328132612.511471-1-srosek@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warnings:
drivers/platform/chrome/cros_ec_debugfs.c:211:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/platform/chrome/cros_ec_debugfs.c:257:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/platform/chrome/cros_ec_debugfs.c:279:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/Z-aiAAcIP7sBRtz0@kspp
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warnings:
drivers/platform/chrome/cros_kbd_led_backlight.c:141:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/platform/chrome/cros_kbd_led_backlight.c:162:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/Z-afGnRbyGs4dHb1@kspp
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warnings:
drivers/platform/chrome/cros_ec_proto.c:143:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/platform/chrome/cros_ec_proto.c:761:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/Z-adX1BB30dcSJ7x@kspp
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Add a new compatible entry for "google,spherion" to the hardware prober
platform list, using the same I2C component prober and trackpad data as
"google,hana".
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250318102259.189289-2-laura.nao@collabora.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes:
- thinkpad_acpi:
- Fix NULL pointer dereferences while probing
- Disable ACPI fan access for T495* and E560
- ISST: Correct command storage data length
The following is an automated shortlog grouped by driver:
ISST:
- Correct command storage data length
MAINTAINERS:
- consistently use my dedicated email address
thinkpad_acpi:
- disable ACPI fan access for T495* and E560
- Fix NULL pointer dereferences while probing
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ+/vRQAKCRBZrE9hU+XO
MStcAQDEc8URl/7qYzOV226aWHL3XeKIkb3XkFNn1klwbHAIIwD+KwNy3amvaeRX
fTNEvNngWO2jjjCSoUITgZGsLp8XcgU=
=YLB+
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix NULL pointer dereferences while probing
- Disable ACPI fan access for T495* and E560
- ISST: Correct command storage data length
* tag 'platform-drivers-x86-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: consistently use my dedicated email address
platform/x86: ISST: Correct command storage data length
platform/x86: thinkpad_acpi: disable ACPI fan access for T495* and E560
platform/x86: thinkpad_acpi: Fix NULL pointer dereferences while probing
__bf_shf() on a 64-bit variable causes a link failure during
compile-testing:
drivers-platform-cznic-turris-omnia-mcu-gpio.c:(.text):undefined-reference-to-__ffsdi2
Open-code this using ffs()-1, which has the same result but avoids
the library call.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
I use a dedicated address for kernel development.
Unfortunately at some point I used another address and later copied it
around to other places.
Consistently use the dedicated address everywhere.
As the old address does in fact work, an update to mailmap is
not necessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250331-email-correction-v1-1-4c0e92862202@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After resume/online turbo limit ratio (TRL) is restored partially if
the admin explicitly changed TRL from user space.
A hash table is used to store SST mail box and MSR settings when modified
to restore those settings after resume or online. This uses a struct
isst_cmd field "data" to store these settings. This is a 64 bit field.
But isst_store_new_cmd() is only assigning as u32. This results in
truncation of 32 bits.
Change the argument to u64 from u32.
Fixes: f607874f35 ("platform/x86: ISST: Restore state on resume")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250328224749.2691272-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
T495, T495s, and E560 laptops have the FANG+FANW ACPI methods
(therefore fang_handle and fanw_handle are not NULL) but they do not
actually work, which results in a "No such device or address" error.
The DSDT table code for the FANG+FANW methods doesn't seem to do
anything special regarding the fan being secondary. The bug was
introduced in commit 57d0557dfa ("platform/x86: thinkpad_acpi: Add
Thinkpad Edge E531 fan support"), which added a new fan control method
via the FANG+FANW ACPI methods.
Add a quirk for T495, T495s, and E560 to avoid the FANG+FANW methods.
Fan access and control is restored after forcing the legacy non-ACPI
fan control method by setting both fang_handle and fanw_handle to NULL.
Reported-by: Vlastimil Holer <vlastimil.holer@gmail.com>
Fixes: 57d0557dfa ("platform/x86: thinkpad_acpi: Add Thinkpad Edge E531 fan support")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219643
Cc: stable@vger.kernel.org
Tested-by: Alireza Elikahi <scr0lll0ck1s4b0v3h0m3k3y@gmail.com>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Eduard Christian Dumitrescu <eduard.c.dumitrescu@gmail.com>
Co-developed-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Signed-off-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Link: https://lore.kernel.org/r/20250324152442.106113-1-ImanDevel@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some subdrivers make use of the global reference tpacpi_pdev during
initialization, which is called from the platform driver's probe.
However, after the commit 38b9ab80db ("platform/x86: thinkpad_acpi:
Move subdriver initialization to tpacpi_pdriver's probe.") this
variable is only properly initialized *after* probing and this can
result in a NULL pointer dereference.
In order to fix this without reverting the commit, register the platform
bundle in two steps, first create and initialize tpacpi_pdev, then
register the driver synchronously with platform_driver_probe(). This way
the benefits of commit 38b9ab80db are preserved.
Additionally, the commit 43fc63a1e8 ("platform/x86: thinkpad_acpi:
Move HWMON initialization to tpacpi_hwmon_pdriver's probe") introduced
a similar problem, however tpacpi_sensors_pdev is only used once inside
the probe, so replace the global reference with the one given by the
probe.
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Closes: https://lore.kernel.org/r/CAL=B37kdL1orSQZD2A3skDOevRXBzF__cJJgY_GFh9LZO3FMsw@mail.gmail.com/
Fixes: 38b9ab80db ("platform/x86: thinkpad_acpi: Move subdriver initialization to tpacpi_pdriver's probe.")
Fixes: 43fc63a1e8 ("platform/x86: thinkpad_acpi: Move HWMON initialization to tpacpi_hwmon_pdriver's probe")
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Tested-by: Gene C <arch@sapience.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250330-thinkpad-fix-v1-1-4906b3fe6b74@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- alienware-wmi: Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities: Support for mic & audio mute LEDs
- samsung-galaxybook: Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl: RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
alienware-wmi:
- Add a state container for LED control feature
- Add a state container for thermal control methods
- Add alienware-wmi.h
- Add WMI Drivers
- Refactor hdmi, amplifier, deepslp methods
- Refactor LED control methods
- Refactor thermal control methods
- Rename alienware-wmi.c
- Split DMI table
- Split the alienware-wmi driver
- Update alienware-wmi config entries
- Update header and module information
amd/pmc:
- fix leak in probe()
- Move macros and structures to the PMC header file
- Notify user when platform does not support s0ix transition
- Remove unnecessary line breaks
- Use managed APIs for mutex
amd/pmf:
- convert timeouts to secs_to_jiffies()
amd:
- Use *-y instead of *-objs in Makefiles
arm64:
- add Huawei Matebook E Go EC driver
arm64: dts: qcom: gaokun3:
- Add Embedded Controller node
compal-laptop:
- Do not include <linux/fb.h>
dell-ddv:
- Fix temperature calculation
- Use devm_battery_hook_register
- Use the power supply extension mechanism
dell: dell-wmi-sysman:
- Use *-y instead of *-objs in Makefile
dell:
- Modify Makefile alignment
- Use *-y instead of *-objs in Makefile
dell-uart-backlight:
- Make dell_uart_bl_serdev_driver static
dt-bindings: platform:
- Add Huawei Matebook E Go EC
hp-bioscfg:
- Replace deprecated strncpy() with strscpy()
- Use wmi_instance_count()
hp:
- Use *-y instead of *-objs in Makefile
hwmon:
- (hp-wmi-sensors) Use the WMI bus API when accessing sensors
ideapad-laptop:
- use dev_groups to register attribute groups
int3472:
- Call "func" "con_id" instead
intel/pmc:
- Add Arrow Lake U/H support to intel_pmc_core driver
- Add Panther Lake support to intel_pmc_core
- Create generic_core_init() for all platforms
- Make tgl_core_generic_init() static
- Move arch specific action to init function
- Remove duplicate enum
- Remove simple init functions
- Remove unnecessary declarations in header
- Remove unneeded extern keyword in header
intel:
- Use *-y instead of *-objs in Makefile
irqdomain: platform/x86:
- Switch to irq_domain_create_linear()
lenovo-wmi-hotkey-utilities.c:
- Support for mic and audio mute LEDs
lenovo-yoga-tab2-pro-1380-fastcharger:
- Make symbol static
MAINTAINERS:
- Add documentation reference for Mellanox platform
- Update ALIENWARE WMI DRIVER entry
mellanox:
- Relocate mlx-platform driver
mlxbf-bootctl:
- Support sysfs entries for RTC battery status
mlx-platform:
- Change register name
- Cosmetic changes
samsung-galaxybook:
- Add samsung-galaxybook driver
- Fix block_recording not supported logic
sonypi:
- Use str_on_off() helper in sonypi_display_info()
think-lmi:
- Use ACPI object when extracting strings
- Use WMI bus API when accessing BIOS settings
thinkpad_acpi:
- check the return value of devm_mutex_init()
- convert timeouts to secs_to_jiffies()
- Do not include <linux/fb.h>
- Move HWMON initialization to tpacpi_hwmon_pdriver's probe
- Move subdriver initialization to tpacpi_pdriver's probe.
tools/power/x86/intel-speed-select:
- Die ID for IO dies
- Fix the condition to check multi die system
- Prefix header search path with sysroot
- Prevent increasing MAX_DIE_PER_PACKAGE
- v1.22 release
wmi:
- Call WCxx methods when setting data blocks
- Rework WCxx/WExx ACPI method handling
- Update documentation regarding the GUID-based API
- Use devres to disable the WMI device
x86-android-tablets:
- Add select POWER_SUPPLY to Kconfig
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ+QJyQAKCRBZrE9hU+XO
MUPYAP4sjtB8DKTIHgiQqado7PJZmdgpeJfAplitwKGe4BOcEQEA1mhuqMA5n6S+
jvbTtRF+jiKxis/5zAtAdChScM/pIgo=
=W+gy
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
* New
- Support ACPI match for Framework systems.
- Expose new sysfs for:
- PD mux status for each EC-managed Type-C port.
- EC feature of AP mode entry.
- Setting USB mode of EC Type-C.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZ+DHCxMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0djABANQJoI2yZt8w8k7mQ9qjkE3C5sZVY83Z
uali0vVU3SnVAP9i5TVJ/RlyerwqtEaqSKfSC5p5Y7uURxnQWQ1cnYu/BQ==
=lEz+
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
- Support ACPI match for Framework systems
- Expose new sysfs for:
- PD mux status for each EC-managed Type-C port
- EC feature of AP mode entry
- Setting USB mode of EC Type-C
* tag 'chrome-platform-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Add support for setting USB mode via sysfs
platform/chrome: cros_ec_sysfs: Expose AP_MODE_ENTRY feature state
platform/chrome: cros_ec_sysfs: Expose PD mux status
platform/chrome: cros_ec_lpc: Match on Framework ACPI device
MAINTAINERS: Update maintainers for ChromeOS USBC related drivers
Commit c78dd25138 ("platform/x86: x86-android-tablets: Add Vexia EDU
ATLA 10 EC battery driver"), adds power_supply class registering to
the x86-android-tablets code.
Add "select POWER_SUPPLY" to the Kconfig entry to avoid these errors:
ERROR: modpost: "power_supply_get_drvdata" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined!
ERROR: modpost: "power_supply_changed" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined!
ERROR: modpost: "devm_power_supply_register" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined!
When POWER_SUPPLY support is not enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503231159.ga9eWMVO-lkp@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250324125052.374369-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-14-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-15-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. The first parameter is NULL here so nothing else needs to
be done.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250319092951.37667-32-jirislaby@kernel.org
[ij: Removed unnecessary details from the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A invalid prototype made it into a previous patch, causing an clang warning:
drivers/platform/cznic/turris-signing-key.c:25:55: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
and a slightly different warning with gcc-11 and earlier but not gcc-12 and up:
drivers/platform/cznic/turris-signing-key.c: In function 'turris_signing_key_instantiate':
drivers/platform/cznic/turris-signing-key.c:25:43: error: parameter name omitted
Add the parameters to get a clean build with all compilers.
Fixes: 0b28b7080e ("platform: cznic: Add keyctl helpers for Turris platform")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503210450.AoOpbJXC-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for digital message signing with the private key stored in
the MCU. Turris Omnia boards with MKL MCUs have a NIST256p ECDSA private
key generated and burned into MCU's flash when manufactured. The private
key is not readable from the MCU, but MCU allows for signing messages
with it and retrieving the public key.
This is exposed to userspace via the keyctl API.
In userspace, the user can look at /proc/keys or list the keyring:
$ cat /proc/keys
0a3b7cd3 ... keyring .turris-signing-keys: 1
3caf0b1a ... turris-om Turris Omnia SN 0000000A1000023 MCU ECDSA k...
$ keyctl rlist %:.turris-signing-keys
1018104602
To get the public key:
$ keyctl read 1018104602
33 bytes of data in key:
025d9108 1fb538ae 8435c88b b4379171 d6b158a9 55751b91 1d23e6a9 d017f4b2
1c
To sign a message:
$ dd if=/dev/urandom of=msg_to_sign bs=32 count=1
$ keyctl pkey_sign 1018104602 0 msg_to_sign >signature
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some Turris devices support signing messages with a per-device unique
asymmetric key that was created on the device at manufacture time.
Add helper module that helps to expose this ability via the keyctl()
syscall.
A device-specific driver can register a signing key by calling
devm_turris_signing_key_create().
Both the `.turris-signing-keys` keyring and the signing key are created
with only the VIEW, READ and SEARCH permissions for userspace - it is
impossible to link / unlink / move them, set their attributes, or unlink
the keyring from userspace.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Refactor the code that gets and requests the TRNG MCU interrupt in the
TRNG part of the driver into a helper function and put it into the GPIO
part of the driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The HSMP interface is just an SMN interface with different offsets.
Define an HSMP wrapper in the SMN code and have the HSMP platform driver
use that rather than a local solution.
Also, remove the "root" member from AMD_NB, since there are no more
users of it.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250130-wip-x86-amd-nb-cleanup-v4-1-b5cc997e471b@amd.com
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-15-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-14-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the general case, a driver doesn't know which of system shutdown or
reboot is the better action to take to protect hardware in an emergency
situation. For this reason, hw_protection_shutdown is going to be removed
in favor of hw_protection_trigger, which defaults to shutdown, but may be
configured at kernel runtime to be a reboot instead.
The ChromeOS EC situation is different as we do know that shutdown is the
correct action as the EC is programmed to force reset after the short
period, thus replace hw_protection_shutdown with __hw_protection_trigger
with HWPROT_ACT_SHUTDOWN as argument to maintain the same behavior.
No functional change.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-9-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fixes and new HW support:
- amd/pmf:
- Fix error handling in amd_pmf_init_smart_pc()
- Fix missing hidden options for Smart PC
- surface: aggregator_registry: Add Support for Surface Pro 11
The following is an automated shortlog grouped by driver:
amd/pmf:
- fix cleanup in amd_pmf_init_smart_pc()
amd: pmf:
- Fix missing hidden options for Smart PC
MAINTAINERS:
- Update Ike Panhc's email address
surface: aggregator_registry:
- Add Support for Surface Pro 11
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ9Q9DAAKCRBZrE9hU+XO
MZE3AP9GnIgzXK1dFbuorGfNCHMol4TbR6oANflMBPvORWE54QD/XWwongTvUpFU
cgwVSasJb2fLso/nyBlVmYeKE7h8qAk=
=6Une
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support.
The diff is a bit larger than I'd prefer at this point due to
unwinding the amd/pmf driver's error handling properly instead of
calling a deinit function that was a can full of worms.
Summary:
- amd/pmf:
- Fix error handling in amd_pmf_init_smart_pc()
- Fix missing hidden options for Smart PC
- surface: aggregator_registry: Add Support for Surface Pro 11"
* tag 'platform-drivers-x86-v6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: Update Ike Panhc's email address
platform/x86/amd: pmf: Fix missing hidden options for Smart PC
platform/surface: aggregator_registry: Add Support for Surface Pro 11
platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()
Call pci_dev_put(rdev) before returning.
Fixes: 6ad1b2dc0f ("platform/x86/amd/pmc: Use managed APIs for mutex")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/65e2fffb-a1cb-4297-b725-661d6b790a05@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_pmf_get_slider_info() checks the current profile to report correct
value to the TA inputs. If hidden options are in use then the wrong
values will be reported to TA.
Add the two compat options PLATFORM_PROFILE_BALANCED_PERFORMANCE and
PLATFORM_PROFILE_QUIET for this use.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 9a43102daf ("platform/x86/amd: pmf: Add balanced-performance to hidden choices")
Fixes: 44e94fece5 ("platform/x86/amd: pmf: Add 'quiet' to hidden choices")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250306034402.50478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add SAM client device nodes for the Surface Pro 11 (Intel).
Like with the Surface Pro 10 already, the node group
is compatible, so it can be reused.
Signed-off-by: Lukas Hetzenecker <lukas@hetzenecker.me>
Link: https://lore.kernel.org/r/20250310232803.23691-1-lukas@hetzenecker.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are a few problems in this code:
First, if amd_pmf_tee_init() fails then the function returns directly
instead of cleaning up. We cannot simply do a "goto error;" because
the amd_pmf_tee_init() cleanup calls tee_shm_free(dev->fw_shm_pool);
and amd_pmf_tee_deinit() calls it as well leading to a double free.
I have re-written this code to use an unwind ladder to free the
allocations.
Second, if amd_pmf_start_policy_engine() fails on every iteration though
the loop then the code calls amd_pmf_tee_deinit() twice which is also a
double free. Call amd_pmf_tee_deinit() inside the loop for each failed
iteration. Also on that path the error codes are not necessarily
negative kernel error codes. Set the error code to -EINVAL.
There is a very subtle third bug which is that if the call to
input_register_device() in amd_pmf_register_input_device() fails then
we call input_unregister_device() on an input device that wasn't
registered. This will lead to a reference counting underflow
because of the device_del(&dev->dev) in __input_unregister_device().
It's unlikely that anyone would ever hit this bug in real life.
Fixes: 376a8c2a14 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/232231fc-6a71-495e-971b-be2a76f6db4c@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible
with the existing user space (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmfLW54SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1VOUIAJwwmxAcJGHxbOPvK5r7jO/Rq4XFbMuT
ftNEX+awNFcBFtm7dgxhTjqZUFDDntvB/+BDuBMz1xsP2QRsW38R84hiVlJgisT1
XlMdqXalYQgN/MEQvS22AudyLBuWw1+/i9d8rZOf73wA9thOt5KrJa5IIieT1oJe
kd5Kf3onrmwSv5h38NqKkUzO2QdY5rluUG47HIaiNpe+HODDwf2NU335CUV4V69q
t6LKEoiSJ7Ziv7a5morXXu2Y26eTjK9kG8insGCgp/oK+nyxx5K8a7i/d8Hlp92b
X21G4P278lYTBDR4QoJrhKPyLqvNUx9qQ7KHXrNPZGY/c+g31yfvWC8=
=c0sa
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Restore the previous behavior of the ACPI platform_profile sysfs
interface that has been changed recently in a way incompatible with
the existing user space (Mario Limonciello)"
* tag 'acpi-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86/amd: pmf: Add balanced-performance to hidden choices
platform/x86/amd: pmf: Add 'quiet' to hidden choices
ACPI: platform_profile: Add support for hidden choices
Fixes and new HW support:
- amd/pmf:
- Initialize 'cb_mutex'
- Support for new version of PMF-TA
- intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet
- intel/vsec: Add Diamond Rapids support
- thinkpad_acpi: Add battery quirk for ThinkPad X131e
The following is an automated shortlog grouped by driver:
amd/pmf:
- Initialize and clean up `cb_mutex`
- Propagate PMF-TA return codes
- Update PMF Driver for Compatibility with new PMF-TA
intel-hid:
- fix volume buttons on Microsoft Surface Go 4 tablet
intel/vsec:
- Add Diamond Rapids support
thinkpad_acpi:
- Add battery quirk for ThinkPad X131e
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ8rDZAAKCRBZrE9hU+XO
McQhAQDw1Vf8jKrdK3X80DNSuIToO5B4dpX+PB8r4xgK96ipqgD9GKxHW1tbGqHH
vUTEqwcpDwBMe+wDRbD31SBaZUSgXwo=
=wZNA
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmf:
- Initialize 'cb_mutex'
- Support for new version of PMF-TA
- intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet
- intel/vsec: Add Diamond Rapids support
- thinkpad_acpi: Add battery quirk for ThinkPad X131e
* tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA
platform/x86/amd/pmf: Propagate PMF-TA return codes
platform/x86/intel/vsec: Add Diamond Rapids support
platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e
platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tablet
platform/x86/amd/pmf: Initialize and clean up `cb_mutex`
Enhance code readability by fixing line break and blank line
inconsistencies.
Also make the return variable "rc" as function level local.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To improve the code organization and readability, move the macros and
structures from the AMD PMC driver to the PMC header file.
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some of the AMD platforms do not support modern standby, so when such
CPU ID is detected, a warning message will be displayed to the user.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305142615.410178-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use the power supply extension mechanism for registering the battery
temperature properties so that they can show up in the hwmon device
associated with the ACPI battery.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250305053009.378609-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use devm_battery_hook_register() instead of manually calling
devm_add_action_or_reset() to simplify the code.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250305053009.378609-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On the Dell Inspiron 3505 the battery temperature is always
0.1 degrees larger than the temperature show inside the OEM
application.
Emulate this behaviour to avoid showing strange looking values
like 29.1 degrees.
Fixes: 0331b1b0ba ("platform/x86: dell-ddv: Fix temperature scaling")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250305053009.378609-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes logic error when block_recording is not supported but the fw attr was
being added anyway (reported by GitHub user bbregeault).
Tested myself on a Samsung Galaxy Book2 Pro (has block_recording) and by
bbregeault on a Galaxy Book2 Business (does not have block_recording).
Fixes: 56f529ce43 ("platform/x86: samsung-galaxybook: Add samsung-galaxybook driver")
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250303132433.348653-1-josh@joshuagrisham.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Sparse reports:
dell-uart-backlight.c:328:29: warning: symbol
'dell_uart_bl_serdev_driver' was not declared. Should it be static?
Fix it by making the symbol static.
Fixes: 484bae9e4d ("platform/x86: Add new Dell UART backlight driver")
Reviewed-by: Mario Limonciello <maroi.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250304160639.4295-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Sparse reports:
lenovo-yoga-tab2-pro-1380-fastcharger.c:222:29: warning: symbol
'yt2_1380_fc_serdev_driver' was not declared. Should it be static?
Fix that by making the symbol static.
Fixes: b2ed33e8d4 ("platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250304160639.4295-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The PMF driver allocates a shared memory buffer using
tee_shm_alloc_kernel_buf() for communication with the PMF-TA.
The latest PMF-TA version introduces new structures with OEM debug
information and additional policy input conditions for evaluating the
policy binary. Consequently, the shared memory size must be increased to
ensure compatibility between the PMF driver and the updated PMF-TA.
To do so, introduce the new PMF-TA UUID and update the PMF shared memory
configuration to ensure compatibility with the latest PMF-TA version.
Additionally, export the TA UUID.
These updates will result in modifications to the prototypes of
amd_pmf_tee_init() and amd_pmf_ta_open_session().
Link: https://lore.kernel.org/all/55ac865f-b1c7-fa81-51c4-d211c7963e7e@linux.intel.com/
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In the amd_pmf_invoke_cmd_init() function within the PMF driver ensure
that the actual result from the PMF-TA is returned rather than a generic
EIO. This change allows for proper handling of errors originating from the
PMF-TA.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acer's WMI driver uses balanced-performance but AMD-PMF doesn't.
In case a machine binds with both drivers let amd-pmf use
balanced-performance as well.
Fixes: 688834743d ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When amd-pmf and asus-wmi are both bound no low power option shows
up in sysfs. Add a hidden choice for amd-pmf to support 'quiet' mode
to let both bind.
Fixes: 688834743d ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-3-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Implement Lenovo utility data WMI calls needed to make LEDs
work on Ideapads that support this GUID.
This enables the mic and audio LEDs to be updated correctly.
Tested on below samples.
ThinkBook 13X Gen4 IMH
ThinkBook 14 G6 ABP
ThinkBook 16p Gen4-21J8
ThinkBook 16 G8 IRL
ThinkBook 16 G7+ ASP
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250222114532.4105-1-xy-jackie@139.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Based on the dmesg messages from the original reporter:
[ 4.964073] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
[ 4.964083] thinkpad_acpi: Error probing battery 2
Lenovo ThinkPad X131e also needs this battery quirk.
Reported-by: Fan Yang <804284660@qq.com>
Tested-by: Fan Yang <804284660@qq.com>
Co-developed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250221164825.77315-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Volume buttons on Microsoft Surface Go 4 tablet didn't send any events.
Add Surface Go 4 DMI match to button_array_table to fix this.
Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250220154016.3620917-1-dmitry@d-systems.ee
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
`cb_mutex` was introduced in commit 9e0894d070 ("platform/x86/amd/pmf:
Enable Custom BIOS Inputs for PMF-TA") to prevent conccurrent access for
BIOS inputs. It however isn't initialized and so on use it may lead to
a NULL pointer dereference.
Add code to initialize on probe and clean up on destroy.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Cc: Richard Gong <richgong@amd.com>
Fixes: 9e0894d070 ("platform/x86/amd/pmf: Enable Custom BIOS Inputs for PMF-TA")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-By: Yijun Shen <Yijun_Shen@Dell.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250227170308.435862-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are three variants of which Huawei released the first two
simultaneously.
Huawei Matebook E Go LTE(sc8180x), codename seems to be gaokun2.
Huawei Matebook E Go(sc8280xp@3.0GHz), codename must be gaokun3. (see [1])
Huawei Matebook E Go 2023(sc8280xp@2.69GHz), codename should be also gaokun3.
Adding support for the latter two variants for now, this driver should
also work for the sc8180x variant according to acpi table files, but I
don't have the device to test yet.
Different from other Qualcomm Snapdragon sc8280xp based machines, the
Huawei Matebook E Go uses an embedded controller while others use
a system called PMIC GLink. This embedded controller can be used to
perform a set of various functions, including, but not limited to:
- Battery and charger monitoring;
- Charge control and smart charge;
- Fn_lock settings;
- Tablet lid status;
- Temperature sensors;
- USB Type-C notifications (ports orientation, DP alt mode HPD);
- USB Type-C PD (according to observation, up to 48w).
Add a driver for the EC which creates devices for UCSI and power supply
devices.
This driver is inspired by the following drivers:
drivers/platform/arm64/acer-aspire1-ec.c
drivers/platform/arm64/lenovo-yoga-c630.c
drivers/platform/x86/huawei-wmi.c
Also thanks for reviewers' working. They have made this patch improve
a lot.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=219645
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250214180656.28599-3-mitltlatltl@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The `objs` suffix is reserved for user-space tools. Use the `y` suffix
instead, which is usually used for kernel drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250218194113.26589-5-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The `objs` suffix is reserved for user-space tools. Use the `y` suffix
instead, which is usually used for kernel drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250218194113.26589-4-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The `objs` suffix is reserved for user-space tools. Use the `y` suffix
instead, which is usually used for kernel drivers.
While at it, fix alignment in AMD PMC and PMF Makefiles.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250218194113.26589-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The `objs` suffix is reserved for user-space tools. Use the `y` suffix
instead, which is usually used for kernel drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250218194113.26589-2-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Let the driver core manage the lifetime of the HWMON device, by
registering it inside tpacpi_hwmon_pdriver's probe and using
devm_hwmon_device_register_with_groups().
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250215000302.19753-3-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It was reported that if subdrivers assigned devres resources inside
ibm_init_struct's .init callbacks, driver binding would fail with the
following error message:
platform thinkpad_acpi: Resources present before probing
Let the driver core manage the lifetimes of the subdrivers and children
devices, by initializing them inside tpacpi_driver's .probe callback.
This is appropriate because these subdrivers usually expose sysfs groups
and the driver core manages this automatically to avoid races.
One immediate benefit of this, is that we are now able to use devres
inside .init subdriver callbacks.
platform_create_bundle is specifically used because it makes the
driver's probe type synchronous and returns an ERR_PTR if attachment
failed.
Additionally, to make error handling simpler, allocate the input device
using devm_input_allocate_device().
Reported-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Closes: https://lore.kernel.org/platform-driver-x86/20250208091438.5972-1-mpearson-lenovo@squebb.ca/#t
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250215000302.19753-2-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove unneeded extern keyword in header file. Functions are
extern by default so extern keyword is not unnecessary for
function declaration.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250214214416.10150-4-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove unnecessary declarations in header file. Variable that are
used by only one .c file are removed from header file and changed
to be static in their corresponding .c file.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250214214416.10150-3-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Panther Lake support to intel_pmc_core driver
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250214214416.10150-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After performing some tests with a custom SSDT table available at
https://github.com/Wer-Wolf/acpi-wmi-ssdt i found out that Windows
also enables data block collection even when the data block is
being set.
Emulate this behaviour to avoid confusing the ACPI firmware.
The bus-based API already implements this behaviour, so only the
legacy GUID-based API needs to be changed.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250216193251.866125-8-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The handling of the WExx ACPI methods used for enabling and disabling
WMI events has multiple flaws:
- the ACPI methods are called even when the WMI device has not been
marked as expensive.
- WExx ACPI methods might be called for inappropriate WMI devices.
- the error code AE_NOT_FOUND is treated as success.
The handling of the WCxx ACPI methods used for enabling and disabling
WMI data blocks is also flawed:
- WMI data blocks are enabled and disabled for every single "query"
operation. This is racy and inefficient.
Unify the handling of both ACPI methods by introducing a common
helper function for enabling and disabling WMI devices.
Also enable/disable WMI data blocks during probe/remove and shutdown
to match the handling of WMI events.
Legacy GUID-based functions still have to enable/disable the WMI
device manually and thus still suffer from a potential race condition.
Since those functions are deprecated and suffer from various other
flaws this issue is purposefully not fixed.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250216193251.866125-7-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use devm_add_action_or_reset() to disable the WMI device instead of
manually calling wmi_method_enable() to prepare for future changes
inside the WMI data block handlign code.
The reason for this is that we have to make sure that all
devres-managed resources are released first because some might still
want to access the underlying WMI device.
Because devres-managed resources are not released during shutdown
we still have to manually disable the WMI device in this case.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250216193251.866125-6-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The WMI core already knows the instance count of a WMI guid.
Use this information instead of querying all possible instances
which is slow and might be unreliable.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250216193251.866125-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since the driver already binds to LENOVO_BIOS_SETTING_GUID, using
wmidev_block_query() inside tlmi_setting() allows for faster
access to BIOS settings.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250216193251.866125-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the ACPI buffer handling out of tlmi_extract_output_string()
and instead pass the unpacked ACPI object to prepare for future
changes.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250216193251.866125-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files, addressing
both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=z1+P
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
This patch implements USB mode setting via a sysfs interface in
cros_ec_typec driver. User-space applications can now change the current
USB mode by writing to "usb_mode" sysfs entry, replacing the previous
ioctl-based method.
The embedded controller (EC) currently supports only entering USB4 mode
and exiting all modes (including altmodes). Both of these operations
trigger Data Reset Message, even if no USB Mode is active.
Additionally, the patch exposes the USB modes supported by the port via
"usb_capability" sysfs attribute.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Link: https://lore.kernel.org/r/20250210130419.4110130-1-akuchynski@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The `objs` suffix is reserved for user-space tools. Use the `y` suffix
instead, which is usually used for kernel drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250214214535.4947-1-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
CZ.NIC's Turris devices are based on Marvell EBU SoCs. Hence add a
dependency on ARCH_MVEBU, to prevent asking the user about these drivers
when configuring a kernel that cannot run on an affected CZ.NIC Turris
system.
Fixes: 992f1a3d4e ("platform: cznic: Add preliminary support for Turris Omnia MCU")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Instead of manually adding/removing attribute groups, set
(struct device_driver).dev_groups pointer to have the driver
core do it.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250210155333.1145867-1-ovidiu.panait.oss@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move arch specific action from core.c to the init() function of spt.c.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250212010621.1003663-1-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
"con_id" is an established variable name for the GPIO naming for drivers.
Use it instead of "func" in the int3472 driver, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-4-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The recent platform profile changes prevent the tpacpi platform driver
from registering. This error is seen in the kernel logs, and the
various tpacpi entries are not created:
[ 7550.642171] platform thinkpad_acpi: Resources present before probing
This happens because devm_platform_profile_register() is called before
tpacpi_pdev probes (thanks to Kurt Borja for identifying the root
cause).
For now revert back to the old platform_profile_register to fix the
issue. This is quick fix and will be re-implemented later as more
testing is needed for full solution.
Tested on X1 Carbon G12.
Fixes: 31658c916f ("platform/x86: thinkpad_acpi: Use devm_platform_profile_register()")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250211173620.16522-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The DT bindings for ov7251 specify "enable" GPIO (xshutdown in
documentation) but the int3472 indiscriminately provides this as a "reset"
GPIO to sensor drivers. Take this into account by assigning it as "enable"
with active high polarity for INT347E devices, i.e. ov7251. "reset" with
active low polarity remains the default GPIO name for other devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-3-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Struct gpiod_lookup flags field's type is unsigned long. Thus use unsigned
long for values to be assigned to that field. Similarly, also call the
field gpio_flags which it really is.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-2-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Newer Thinkpad AMD platforms are using V9 DYTC and this changes the
profiles used for PSC mode. Add support for this update.
Tested on P14s G5 AMD
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250206193953.58365-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On ThinkPad X120e, fan speed is reported in ticks per revolution
rather than RPM.
Recalculate the fan speed value reported for ThinkPad X120e
to RPM based on a 22.5 kHz clock.
Based on the information on
https://www.thinkwiki.org/wiki/How_to_control_fan_speed,
the same problem is highly likely to be relevant to at least Edge11,
but Edge11 is not addressed in this patch.
Signed-off-by: Sybil Isabel Dorsett <sybdorsett@proton.me>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250203163255.5525-1-sybdorsett@proton.me
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Arrow Lake U and Arrow Lake H support in intel_pmc_core driver.
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250207225615.401235-7-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove simple init functions to avoid duplicate code. Store
init function performing architecture specific action in the
corresponding pmc_dev_info structure. Replace init function
with pmc_dev_info structure in X86_MATCH_VFM() of core.c.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250207225615.401235-5-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Create a generic_core_init() function for all architectures to reduce
duplicate code in each architecture file. Create an info structure
to catch the variations between each architecture and pass it to the
generic init function.
Convert all architectures to call the generic core init function.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250207225615.401235-4-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove duplicate enum PMC_IDX_SOC. PMC_IDX_SOC has the same value
as PMC_IDX_MAIN. Replace it with PMC_IDX_MAIN to avoid confusion.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250207225615.401235-3-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Make tgl_core_generic_init() a static function as the function has no
callers outside of tgl.c. Remove the prototype in core.h and reorder
the code in tgl.c.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250207225615.401235-2-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update module header and description. Additionally add myself as a module
author.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-15-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add config entries for each WMI driver managed by the alienware-wmi
module to be able to conditionally compile them.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-14-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add one more TAB to each line to support upcoming changes.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-13-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Split alienware-wmi WMI drivers into different files. This is done
seamlessly by copying and pasting, however some blocks are reordered.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-12-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a header file for alienware-wmi with shared resources to support the
upcoming file split.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-11-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename alienware-wmi to support upcoming split.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-10-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Split thermal features into a new DMI table to support upcoming file
split. While at it:
Rename quirk_entry -> alienfx_quirks,
Rename quirks -> alienfx
and change hdmi_mux, amplifier and deepslp types to bool, because they are
already being implicitly used as bools.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-8-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Refactor thermal control methods to use alienware_wmi_command() instead
of alienware_wmax_command().
Drop alienware_wmax_command() as there is no more users left.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-7-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Refactor show/store methods for hdmi, amplifier, deepslp sysfs groups to
use alienware_wmi_command() instead of alienware_wmax_command() which
uses deprecated WMI methods.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-6-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Both WMI devices handled by this module specify a distinct interface for
LED control. Previously this module handled this by dynamically adapting
arguments passed to wmi_evaluate_method() based on the `interface`
global variable.
To avoid the use of global variables, and enable the migration to
non-deprecated WMI methods, let the WMI drivers define upd_led and
upd_brightness operations, which completely replace
alienware_update_led() and wmax_brightness().
Also define alienware_wmi_command(), which serves as a wrapper for
wmidev_evaluate_method(). This new method is very similar to
alienware_wmax_command() but is WMI device agnostic.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-5-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Refactor all thermal control methods to use the newly defined awcc_priv
state container instead of global variables. While at it, rename
create_thermal_profile() to awcc_platform_profile_init() and introduce
alienware_awcc_setup() to set up the "AWCC" WMI device driver data.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-4-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add WMI drivers for LEGACY and WMAX devices.
This involves moving the platform device registration to a helper
function that is now called from the driver's preferred WMI device
driver probe. In the case of the WMAX this is done only if
`!quirks->thermal` because the newer WMAX interface doesn't support any
of the LED features of this driver. This also eliminates the need to
check for `quirks->num_zones > 0` inside alienfx_probe().
Only one WMI driver is registered on module initialization to prevent
registering a duplicate platform device.
Additionally, create_thermal_profile() now takes wmi_device * instead of
platform_device *.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a state container for the "alienware-wmi" platform device and
initialize it on the new alienfx_probe(). Migrate all LED control functions
to use this state container to support upcoming file split.
Additionally move the led_classdev registration to the platform driver
probe and make it device managed.
Drop alienware_zone_init() and alienware_zone_exit() because they are no
longer needed and mimic the `quirks->num_zone > 0` check by failing the
platform device probe.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-2-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a new driver for Samsung Galaxy Book series notebook devices with the
following features:
- Keyboard backlight control
- Battery hook for installing power supply extension to add charge
control end threshold
- Controller for Samsung's performance modes using the platform profile
interface
- Adds firmware-attributes to control various system features
- Handles various hotkeys and notifications
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250201105450.193450-1-josh@joshuagrisham.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This adds sysfs attribute /sys/class/chromeos/cros_ec/ap_mode_entry
to expose the status of the AP_MODE_ENTRY feature. This attribute
indicate whether the EC requires direction from the Application
Processor (AP) before entering Type-C alternate modes or USB4 mode.
This allows user-space applications to easily determine if the AP needs
to be involved in mode entry.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Link: https://lore.kernel.org/r/20250203125947.2701106-3-akuchynski@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
This adds sysfs attribute /sys/class/chromeos/cros_ec/usbpdmuxinfo
to expose the PD mux status for each Type-C port.
This allows user-space applications to easily determine
the current mux state without using ioctls.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Link: https://lore.kernel.org/r/20250203125947.2701106-2-akuchynski@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Register 0xd9 was repurposed on new systems. Change its name
to correctly reflect the new functionality.
Reviewed-by: Felix Radensky <fradensky@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250124172632.22437-4-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move 'mlx-platform' driver 'x86' to 'mellanox' folder.
Motivation to allow running it on systems with ARM architecture.
Since drivers/platform/x86/mlx-platform.c is rellocated to folder
drivers/platform/x86/, remove "MELLANOX PLATFORM DRIVER" item.
This driver will be located under "MELLANOX HARDWARE PLATFORM SUPPORT"
item.
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250124172632.22437-2-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The documentation previously listed the path to download In Field Scan
(IFS) test images as "TBD".
Update the documentation to include the correct image download
location. Also move the download link to the appropriate section within
the documentation.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20250131205315.1585663-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Nothing in this source file requires <linux/fb.h>. Remove the include
statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250131095235.125533-3-tzimmermann@suse.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Nothing in this source file requires <linux/fb.h>. Remove the include
statement.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250131095235.125533-2-tzimmermann@suse.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch extends the mlxbf-bootctl driver's sysfs entries
to support read access for the board's RTC battery status.
A successful read from this attribute returns the status of
the board's RTC battery. The RTC battery status register is
also cleared upon successful read operation.
Signed-off-by: Xiangrong Li <xiangrongl@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250124144655.48564-1-xiangrongl@nvidia.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In pmc_core_ltr_show(), promote 'val' to 'u64' to avoid possible integer
overflow. Values (10 bit) are multiplied by the scale, the result of
expression is in a range from 1 to 34,326,183,936 which is bigger then
UINT32_MAX. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250123220739.68087-1-d.kandybka@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
devm_platform_profile_register() expects a pointer to the private driver
data but instead an address of the pointer variable is passed due to a
typo. This leads to the crashes later:
BUG: unable to handle page fault for address: 00000000fe0d0044
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 6 UID: 0 PID: 1284 Comm: tuned Tainted: G W 6.13.0+ #7
Tainted: [W]=WARN
Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023
RIP: 0010:__mutex_lock.constprop.0+0x6bf/0x7f0
Call Trace:
<TASK>
dytc_profile_set+0x4a/0x140 [ideapad_laptop]
_store_and_notify+0x13/0x40 [platform_profile]
class_for_each_device+0x145/0x180
platform_profile_store+0xc0/0x130 [platform_profile]
kernfs_fop_write_iter+0x13e/0x1f0
vfs_write+0x290/0x450
ksys_write+0x6c/0xe0
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Found by Linux Verification Center (linuxtesting.org).
Fixes: 249c576f0f ("ACPI: platform_profile: Let drivers set drvdata to the class device")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250127210202.568691-1-pchelkin@ispras.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Load the cros_ec_lpc driver based on a Framework FRMWC004 ACPI device,
which mirrors GOOG0004, but also applies npcx quirks for Framework
systems.
Matching on ACPI will let us avoid having to change the SMBIOS match
rules again and again.
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: linux@frame.work
Cc: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Daniel Schaefer <dhs@frame.work>
Link: https://lore.kernel.org/r/20250128181329.8070-1-dhs@frame.work
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for existing
drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5fI8A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yloPwCguHSvL8FM6Xwaxc/hdfalwI4c49AAnRECaMhR
mA1owvXgrKO3hjDHo2Sg
=Z5yt
-----END PGP SIGNATURE-----
Merge tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for
existing drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: hcd: Bump local buffer size in rh_string()
Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"
usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS
usb: xhci: tegra: Fix OF boolean read warning
usb: host: xhci-plat: add support compatible ID PNP0D15
usb: typec: ucsi: Add a macro definition for UCSI v1.0
usb: dwc3: core: Defer the probe until USB power supply ready
usbip: Correct format specifier for seqnum from %d to %u
usbip: Fix seqnum sign extension issue in vhci_tx_urb
dt-bindings: usb: snps,dwc3: Split core description
usb: quirks: Add NO_LPM quirk for TOSHIBA TransMemory-Mx device
usb: dwc3: gadget: Reinitiate stream for all host NoStream behavior
USB: Use str_enable_disable-like helpers
USB: gadget: Use str_enable_disable-like helpers
USB: phy: Use str_enable_disable-like helpers
USB: typec: Use str_enable_disable-like helpers
USB: host: Use str_enable_disable-like helpers
USB: Replace own str_plural with common one
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
usb: phy: Remove API devm_usb_put_phy()
...
* power-supply core
- introduce power supply extensions, which allows adding properties to
a power supply device from a separate driver. This will be used
initially to extend the generic ACPI charger/battery driver with
vendor extensions for charge thresholds.
- convert all drivers from power_supply_for_each_device to new
power_supply_for_each_psy(), which avoids lots of casting being
done in the drivers.
- avoid LED trigger like values in uevent for POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR
- introduce POWER_SUPPLY_PROP_CHARGE_TYPES, which is similar to the
POWER_SUPPLY_PROP_CHARGE_TYPE property, but also lists the available
options on the specific platform
* power-supply drivers
- dell-laptop: use new power_supply_charge_types_show/_parse helpers
- stc3117: new driver for equally named fuel gauge chip
- bq24190: add support for new POWER_SUPPLY_PROP_CHARGE_TYPES
- bq24190: add BQ24297 support
- bq27xxx: add voltage min design for bq27000/bq27200
- cros_charge-control: convert to new power supply extension API
- multiple drivers: constify 'struct bin_attribute'
- ds2782: convert to device managed resources
- max1720x: add charge full property
- max1720x: support extra thermistor temperatures
- max17042: add max77705 support
- ip5xxx-power: add support for IP5306
- ltc4162-l-charger: add ltc4162-f/s and ltc4015 support
- gpio-charger: support for default charge current limit
- misc. small cleanups and fixes
* reset drivers
- at91-poweroff: add sam9x7 support
-----BEGIN PGP SIGNATURE-----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=dx5S
-----END PGP SIGNATURE-----
Merge tag 'for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power supply extensions, which allows adding properties
to a power supply device from a separate driver. This will be used
initially to extend the generic ACPI charger/battery driver with
vendor extensions for charge thresholds.
- convert all drivers from power_supply_for_each_device to new
power_supply_for_each_psy(), which avoids lots of casting being
done in the drivers.
- avoid LED trigger like values in uevent for
POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR
- introduce POWER_SUPPLY_PROP_CHARGE_TYPES, which is similar to the
POWER_SUPPLY_PROP_CHARGE_TYPE property, but also lists the
available options on the specific platform
Power-supply drivers
- dell-laptop: use new power_supply_charge_types_show/_parse helpers
- stc3117: new driver for equally named fuel gauge chip
- bq24190: add support for new POWER_SUPPLY_PROP_CHARGE_TYPES
- bq24190: add BQ24297 support
- bq27xxx: add voltage min design for bq27000/bq27200
- cros_charge-control: convert to new power supply extension API
- multiple drivers: constify 'struct bin_attribute'
- ds2782: convert to device managed resources
- max1720x: add charge full property
- max1720x: support extra thermistor temperatures
- max17042: add max77705 support
- ip5xxx-power: add support for IP5306
- ltc4162-l-charger: add ltc4162-f/s and ltc4015 support
- gpio-charger: support for default charge current limit
- misc small cleanups and fixes
Reset drivers:
- at91-poweroff: add sam9x7 support"
* tag 'for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (77 commits)
power: supply: max1720x: add support for reading internal and thermistor temperatures
power: supply: ltc4162l: Use GENMASK macro in bitmask operation
power: supply: max17042: add max77705 fuel gauge support
dt-bindings: power: supply: max17042: add max77705 support
power: supply: add undervoltage health status property
power: supply: max17042: add platform driver variant
power: supply: max17042: make interrupt shared
power: reset: keystone: Use syscon_regmap_lookup_by_phandle_args
power: supply: Use str_enable_disable-like helpers
platform/x86: dell-laptop: Use power_supply_charge_types_show/_parse() helpers
power: supply: bq2415x_charger: Immediately reschedule delayed work on notifier events
power: supply: Add STC3117 fuel gauge unit driver
dt-bindings: power: supply: Add STC3117 Fuel Gauge
power: supply: ug3105_battery: Let the core handle POWER_SUPPLY_PROP_TECHNOLOGY
power: supply: gpio-charger: add support for default charge current limit
dt-bindings: power: supply: gpio-charger: add support for default charge current limit
power: supply: Use power_supply_external_power_changed() in __power_supply_changed_work()
power: supply: core: fix build of extension sysfs group if CONFIG_SYSFS=n
power: supply: bq2415x_charger: report charging state changes to userspace
bq27xxx: add voltage min design for bq27000 and bq27200
...
This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
* Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI 2.0
- compress-offload API extensions for ASRC support
* ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
* HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual
-----BEGIN PGP SIGNATURE-----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=IBfz
-----END PGP SIGNATURE-----
Merge tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI
2.0
- compress-offload API extensions for ASRC support
ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual"
* tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (235 commits)
ALSA: hda: tas2781-spi: Fix bogus error handling in tas2781_hda_spi_probe()
ALSA: hda: tas2781-spi: Fix error code in tas2781_read_acpi()
ALSA: hda: tas2781-spi: Delete some dead code
ALSA: usb: fcp: Fix return code from poll ops
ALSA: usb: fcp: Fix incorrect resp->opcode retrieval
ALSA: usb: fcp: Fix meter_levels type to __le32
ALSA: hda/realtek: Enable Mute LED on HP Laptop 14s-fq1xxx
ALSA: hda: tas2781-spi: Fix -Wsometimes-uninitialized in tasdevice_spi_switch_book()
ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions
ALSA: hda: tas2781-spi: select CRC32 instead of CRC32_SARWATE
ALSA: usb: fcp: Fix hwdep read ops types
ALSA: scarlett2: Add device_setup option to use FCP driver
ALSA: FCP: Add Focusrite Control Protocol driver
ALSA: hda/tas2781: Add tas2781 hda SPI driver
ALSA: hda/realtek - Fixed headphone distorted sound on Acer Aspire A115-31 laptop
ASoC: xilinx: xlnx_spdif: Simpify using devm_clk_get_enabled()
ALSA: hda: Support for Ideapad hotkey mute LEDs
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83JX, 83MC and 83NM
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83LC
ASoC: dapm: add support for preparing streams
...
Highlights:
- acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile
with WMI calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
- ACPI: platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers
concurrently to avoid the need to quirk which handler takes
precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside
the pre-defined profile
- Abstract and layer platform_profile API better using the
class_dev and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
- amd/hsmp: Add support for HSMP protocol v7
- amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
- amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
- dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and
XPS 9550
- Support probing accelerometer for models yet to be listed in
the DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might
be dangerous)
- HID: amd_sfh: Add support for exporting SRA sensor data
- hp-wmi: Add fan and thermal support for Victus 16-s1000
- input: Add key for phone linking
- input: i8042: Add context for the i8042 filter to enable cleaning up
the filter related global variables from pdx86 drivers
- lenovo-wmi-camera: Use SW_CAMERA_LENS_COVER instead of
KEY_CAMERA_ACCESS
- mellanox: mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
- thinkpad_acpi: Add support for phone link key
- tools/power/x86/intel-speed-select: Fix Turbo Ratio Limit restore
- x86-android-tables: Add support for Vexia EDU ATLA 10 Bluetooth and
EC battery driver
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- add support for Acer Nitro AN515-58
- Add support for Acer PH14-51
- Add support for Acer Predator PH16-72
- Fix initialization of last_non_turbo_profile
- Ignore AC events
- Implement proper hwmon support
- Improve error handling when reading gaming system information
- Rename ACER_CAP_FAN_SPEED_READ
- simplify platform profile cycling
- use an ACPI bitmap to set the platform profile choices
- Use devm_platform_profile_register()
- use new helper function for setting overclocks
- use WMI calls for platform profile handling
ACPI: platform-profile:
- Add a name member to handlers
ACPI: platform_profile:
- Add a prefix to log messages
- Add choices attribute for class interface
- Add concept of a "custom" profile
- Add device pointer into platform profile handler
- Add devm_platform_profile_register()
- Add documentation
- Add name attribute to class interface
- Add `ops` member to handlers
- Add platform handler argument to platform_profile_remove()
- Add `probe` to platform_profile_ops
- Add profile attribute for class interface
- Allow multiple handlers
- Check all profile handler to calculate next
- Clean platform_profile_handler
- Create class for ACPI platform profile
- Let drivers set drvdata to the class device
- Make sure all profile handlers agree on profile
- Move matching string for new profile out of mutex
- Move platform_profile_handler
- Move sanity check out of the mutex
- Notify change events on register and unregister
- Notify class device from platform_profile_notify()
- Only show profiles common for all handlers
- Pass the profile handler into platform_profile_notify()
- Remove platform_profile_handler from callbacks
- Remove platform_profile_handler from exported symbols
- Replace *class_dev member with class_dev
- Use guard(mutex) for register/unregister
- Use `scoped_cond_guard`
alienware_wmi:
- General cleanup of WMAX methods
alienware-wmi:
- Improve hdmi_mux, amplifier and deepslp group creation
- Improve rgb-zones group creation
- Modify parse_rgb() signature
- Move Lighting Control State
- Remove unnecessary check at module exit
- Use devm_platform_profile_register()
amd/hsmp:
- Add support for HSMP protocol version 7 messages
- Constify 'struct bin_attribute'
amd/pmc:
- Add STB support for AMD Desktop variants
- Define enum for S2D/PMC msg_port and add helper function
- Isolate STB code changes to a new file
- Move STB block into amd_pmc_s2d_init()
- Move STB functionality to a new file for better code organization
- Update function names to align with new STB file
- Update IP information structure for newer SoCs
- Update S2D message id for 1Ah Family 70h model
- Use ARRAY_SIZE() to fill num_ips information
amd: pmc:
- Use guard(mutex)
amd: pmf:
- Drop all quirks
amd/pmf:
- Enable Custom BIOS Inputs for PMF-TA
- Get SRA sensor data from AMD SFH driver
amd: pmf: sps:
- Use devm_platform_profile_register()
amd: pmf:
- Switch to guard(mutex)
asus-wmi:
- Use devm_platform_profile_register()
dell: dcdbas:
- Constify 'struct bin_attribute'
dell: dell-pc:
- Create platform device
dell-pc:
- Use devm_platform_profile_register()
dell_rbu:
- Constify 'struct bin_attribute'
dell-smo8800:
- Add a couple more models to lis3lv02d_devices[]
- Add support for probing for the accelerometer i2c address
- Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- Move SMO88xx acpi_device_ids to dell-smo8800-ids.h
dell-sysman:
- Directly use firmware_attributes_class
dell-uart-backlight:
- Use blacklight power constant
docs: platform/x86: wmi:
- mention tool for invoking WMI methods
Documentation/ABI:
- Add document for Mellanox PMC driver
- Add new sysfs field to sysfs-platform-mellanox-pmc
Documentation:
- Add documentation about class interface for platform profiles
firmware_attributes_class:
- Drop lifecycle functions
- Move include linux/device/class.h
- Simplify API
fujitsu-laptop:
- replace strcpy -> strscpy
HID: amd_sfh:
- Add support to export device operating states
hp-bioscfg:
- Directly use firmware_attributes_class
hp-wmi:
- Add fan and thermal profile support for Victus 16-s1000
- Use devm_platform_profile_register()
ideapad-laptop:
- Use devm_platform_profile_register()
Input:
- allocate keycode for phone linking
- i8042 - Add support for platform filter contexts
inspur_platform_profile:
- Use devm_platform_profile_register()
int3472:
- Check for adev == NULL
- Debug log the sensor name
- Fix skl_int3472_handle_gpio_resources() return value
- Make "pin number mismatch" message a debug message
intel: bytcrc_pwrsrc:
- fix power_supply dependency
- Optionally register a power_supply dev
intel: int0002_vgpio:
- Make the irqchip immutable
intel/pmt:
- Constify 'struct bin_attribute'
intel: punit_ipc:
- Remove unused function
intel/sdsi:
- Constify 'struct bin_attribute'
intel/tpmi/plr:
- Make char[] longer to silence warning
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS
MAINTAINERS:
- Change AMD PMC driver status to "Supported"
mlxbf-bootctl:
- Constify 'struct bin_attribute'
- use sysfs_emit() instead of sprintf()
mlxbf-pmc:
- Add support for clock_measure performance block
- Add support for monitoring cycle count
- incorrect type in assignment
mlxreg-hotplug:
- use sysfs_emit() instead of sprintf()
mlxreg-io:
- use sysfs_emit() instead of sprintf()
quickstart:
- don't include 'pm_wakeup.h' directly
serdev_helpers:
- Add get_serdev_controller_from_parent() helper
- Check for serial_ctrl_uid == NULL
surface: surface_platform_profile:
- Use devm_platform_profile_register()
think-lmi:
- Directly use firmware_attributes_class
thinkpad_acpi:
- Add support for new phone link hotkey
thinkpad-acpi:
- replace strcpy with strscpy
thinkpad_acpi:
- Use devm_platform_profile_register()
tools/power/x86/intel-speed-select:
- Fix TRL restore after SST-TF disable
- v1.21 release
wmi-bmof:
- Make use of .bin_size() callback
x86-android-tablets:
- Add Bluetooth support for Vexia EDU ATLA 10
- Add missing __init to get_i2c_adap_by_*()
- Add support for getting serdev-controller by PCI parent
- Add Vexia EDU ATLA 10 EC battery driver
- Change x86_instantiate_serdev() prototype
- make platform data be static
- Make variables only used locally static
- Store serdev-controller ACPI HID + UID in a union
Merges:
- Merge branch 'fixes' into 'for-next'
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge import NS conversion from 'https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ5JDNAAKCRBZrE9hU+XO
MT3AAP9YSYaWZUEgV9T/De2C/ksx0XfmHULmtQHccMgqIsIxmAEAmsBOHsDozPuZ
9F2IbT4uBuQo2iwbGq0DhVd+N36kEQw=
=Vz0C
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
- Fix a memory leak in the cht-wcove driver by using devm_led_classdev_register().
- Fix an OF node reference leak in the netxbig driver.
- Ensure PWM is disabled properly in pwm-multicolor suspend.
- Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlight drivers.
- Add support for STMicroelectronics's LED1202 12-channel LED driver.
- Convert LP8860 bindings to YAML format.
- Add bindings for the TI LP8864/LP8866 LED drivers.
- Add LED1202 LED controller bindings.
- Fix path to color definitions in leds-class-multicolor.yaml.
- Add pm660l compatible to qcom,spmi-flash-led bindings.
- Extend cznic,turris-omnia-leds binding with interrupts property.
- Add documentation for the STMicroelectronics LED1202 driver.
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS.
- Fix a wrong format specifier in the ledtrig-activity driver.
- Fix a bug in the lp8860 driver where only half of the EEPROM was written.
-----BEGIN PGP SIGNATURE-----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=7V05
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Allow struct bin_attribute instances to be placed in read-only memory
for enhanced protection
- Fix a memory leak in the cht-wcove driver by using
devm_led_classdev_register()
- Fix an OF node reference leak in the netxbig driver
- Ensure PWM is disabled properly in pwm-multicolor suspend
- Add support for Texas Instruments LP8864, LP8864S, LP8866
LED-backlight drivers
- Add support for STMicroelectronics's LED1202 12-channel LED driver
- Convert LP8860 bindings to YAML format
- Add bindings for the TI LP8864/LP8866 LED drivers
- Add LED1202 LED controller bindings
- Fix path to color definitions in leds-class-multicolor.yaml
- Add pm660l compatible to qcom,spmi-flash-led bindings
- Extend cznic,turris-omnia-leds binding with interrupts property
- Add documentation for the STMicroelectronics LED1202 driver
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS
- Fix a wrong format specifier in the ledtrig-activity driver
- Fix a bug in the lp8860 driver where only half of the EEPROM was
written
* tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: triggers: Constify 'struct bin_attribute'
leds: cht-wcove: Use devm_led_classdev_register() to avoid memory leak
leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights
dt-bindings: leds: Convert LP8860 into YAML format
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
leds: pwm-multicolor: Disable PWM when going to suspend
leds: netxbig: Fix an OF node reference leak in netxbig_leds_get_of_pdata()
turris-omnia-mcu-interface.h: Move macro definitions outside of enums
MAINTAINERS: Add entry for AAEON UP board FPGA drivers
leds: Add AAEON UP board LED driver
leds: trigger: netdev: Check offload ability on interface up
leds: turris-omnia: Use uppercase first letter in all comments
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver
platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
leds: turris-omnia: Document driver private structures
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
...
* New
- Support new EC if the memory region information comes from the CRS
ACPI resource descriptor in cros_ec_lpc.
* Improvements
- Make sure EC is in RW before probing.
- Only check events on MKBP notifies to reduce the number of query
commands in cros_ec_lpc.
* Cleanups
- Remove unused code and DT bindings for cros-kbd-led-backlight.
- Constify 'struct bin_attribute' in cros_ec_vbc.
- Use str_enabled_disabled() in cros_usbpd_logger.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZ42qHBMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0t4IA/11B/3WZgVdM4xHNd5w16Lhs7BrfDilS
1Q6BNVUg8SuSAP0SF7w5/ogV8Cxljwtnob8+ZKp+29O7ByTb0eryHZzaBQ==
=nimw
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Support new EC if the memory region information comes from the CRS
ACPI resource descriptor in cros_ec_lpc
Improvements:
- Make sure EC is in RW before probing
- Only check events on MKBP notifies to reduce the number of query
commands in cros_ec_lpc
Cleanups:
- Remove unused code and DT bindings for cros-kbd-led-backlight
- Constify 'struct bin_attribute' in cros_ec_vbc
- Use str_enabled_disabled() in cros_usbpd_logger"
* tag 'chrome-platform-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_lpc: Handle EC without CRS section
platform/chrome: cros_usbpd_logger: Use str_enabled_disabled() helper
platform/chrome: cros_ec_lpc: Support direct EC register memory access
platform/chrome: cros_ec_lpc: Merge lpc_driver_ops into ec private structure
platform/chrome: Update ChromeOS EC command tracing
platform/chrome: cros_ec_lpc: Only check for events on MKBP notifies
platform/chrome: cros_ec_vbc: Constify 'struct bin_attribute'
dt-bindings: cros-ec: Remove google,cros-kbd-led-backlight
platform/chrome: cros_kbd_led_backlight: Remove OF match
platform/chrome: cros_ec_proto: remove unnecessary retries
platform/chrome: cros_ec: jump to RW before probing
platform/chrome: cros_kbd_led_backlight: remove unneeded if-statement
1) Per-CPU kthreads must stay affine to a single CPU and never execute
relevant code on any other CPU. This is currently handled by smpboot
code which takes care of CPU-hotplug operations. Affinity here is
a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and can't
run anywhere else. The affinity is set through kthread_bind_mask()
and the subsystem takes care by itself to handle CPU-hotplug
operations. Affinity here is assumed to be a correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This
is not a correctness constraint but merely a preference in terms of
memory locality. kswapd and kcompactd both fall into this category.
The affinity is set manually like for any other task and CPU-hotplug
is supposed to be handled by the relevant subsystem so that the task
is properly reaffined whenever a given CPU from the node comes up.
Also care should be taken so that the node affinity doesn't cross
isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its own
ad-hoc way.
This is an infrastructure proposal to handle this with the following API
changes:
_ kthread_create_on_node() automatically affines the created kthread to
its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called right
after kthread_create_on_node() to specify a preferred affinity
different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine
to the housekeeping CPUs (which means to all online CPUs most of the
time or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
* Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu()
* Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
* Add some correctness check to ensure kthread_bind() is always called
before the first kthread wake up.
* Default affine kthread to its preferred node.
* Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
* Implement kthreads preferred affinity
* Unify kthread worker and kthread API's style
* Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation.
-----BEGIN PGP SIGNATURE-----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=g8In
-----END PGP SIGNATURE-----
Merge tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
which is legacy now, and the creation of the new AMD node concept which
represents the Zen architecture of having a collection of I/O devices within
an SoC. Those nodes comprise the so-called data fabric on Zen. This has
at least one practical advantage of not having to add a PCI ID each time
a new data fabric PCI device releases. Eventually, the lot more uniform
provider of data fabric functionality amd_node.c will be used by all the
drivers which need it
- Smaller cleanups
-----BEGIN PGP SIGNATURE-----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=ZAjD
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- The first part of a restructuring of AMD's representation of a
northbridge which is legacy now, and the creation of the new AMD node
concept which represents the Zen architecture of having a collection
of I/O devices within an SoC. Those nodes comprise the so-called data
fabric on Zen.
This has at least one practical advantage of not having to add a PCI
ID each time a new data fabric PCI device releases. Eventually, the
lot more uniform provider of data fabric functionality amd_node.c
will be used by all the drivers which need it
- Smaller cleanups
* tag 'x86_misc_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_node: Use defines for SMN register offsets
x86/amd_node: Remove dependency on AMD_NB
x86/amd_node: Update __amd_smn_rw() error paths
x86/amd_nb: Move SMN access code to a new amd_node driver
x86/amd_nb, hwmon: (k10temp): Simplify amd_pci_dev_to_node_id()
x86/amd_nb: Simplify function 3 search
x86/amd_nb: Use topology info to get AMD node count
x86/amd_nb: Simplify root device search
x86/amd_nb: Simplify function 4 search
x86: Start moving AMD node functionality out of AMD_NB
x86/amd_nb: Clean up early_is_amd_nb()
x86/amd_nb: Restrict init function to AMD-based systems
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines of the
prefix CPUID_LEAF_*. Consolidate some of the crazy use around the tree
- Smaller cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=9Hdg
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Remove the less generic CPU matching infra around struct x86_cpu_desc
and use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines
of the prefix CPUID_LEAF_*. Consolidate some of the crazy use around
the tree
- Smaller cleanups and improvements
* tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Make all all CPUID leaf names consistent
x86/fpu: Remove unnecessary CPUID level check
x86/fpu: Move CPUID leaf definitions to common code
x86/tsc: Remove CPUID "frequency" leaf magic numbers.
x86/tsc: Move away from TSC leaf magic numbers
x86/cpu: Move TSC CPUID leaf definition
x86/cpu: Refresh DCA leaf reading code
x86/cpu: Remove unnecessary MwAIT leaf checks
x86/cpu: Use MWAIT leaf definition
x86/cpu: Move MWAIT leaf definition to common header
x86/cpu: Remove 'x86_cpu_desc' infrastructure
x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'
x86/cpu: Replace PEBS use of 'x86_cpu_desc' use with 'x86_cpu_id'
x86/cpu: Expose only stepping min/max interface
x86/cpu: Introduce new microcode matching helper
x86/cpufeature: Document cpu_feature_enabled() as the default to use
x86/paravirt: Remove the WBINVD callback
x86/cpufeatures: Free up unused feature bits
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeOX4sACgkQJNaLcl1U
h9BFQAf/Q4OkXtVsoNMxz0gqOE9nEJXII2pbogssE19cVMF38JgONC1qqIHag+Gj
FR/HBw+WRmdQQHk+tgIYI6AXnD5N47EyJfm6+Ya0y6YGCrzv8AMQkAl1qO8KCZnY
ywVq8uNtximupX3l13KAwUymrRflBJMRticIDBi0M8+NYB7M+qQzjVW4+XF+U5iz
VNMzNQP9JV0dbTuNedHIj8vkvOeS7AMv11VyZ6leZr2Y4yEhIsoTnOfhHkz59/lo
SdBj5ZouoYRjlZs24Snu9rcpz3eLy5/MiSmlD9yJkMUR8aySzmdzAJdreOmakk+k
xk0XHWOa80aG7Gt6I0hugpQJuI5Diw==
=64A0
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.14
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
On machines that do not support the balanced profile the value of
last_non_turbo_profile is invalid after initialization which might
cause the driver to switch to an unsupported platform profile later.
Fix this by only setting last_non_turbo_profile to supported platform
profile values.
Fixes: 191e21f1a4 ("platform/x86: acer-wmi: use an ACPI bitmap to set the platform profile choices")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Hridesh MG <hridesh699@gmail.com>
Reviewed-by: Hridesh MG <hridesh699@gmail.com>
Link: https://lore.kernel.org/r/20250119201723.11102-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250116081129.2902274-1-aichao@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250116081000.2900435-1-aichao@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250116080836.2890442-1-aichao@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The following patch adds support for HP Victus 16-s1000 laptop series,
by adding and fixing the following functionalities, which can be
accessed through hwmon and platform_profile sysfs:
- Functional measured fan speed reading
- Ability to enable and disable maximum fan speed
- Platform profiles full setting ability for CPU and GPU
It sets appropriates CPU and GPU power settings both on AC and battery
power sources, for low-power, balanced and performance modes.
It has been thoroughly tested on a 16-s1034nf laptop based on a 8C9C DMI
board name, and behavior of the driver on previous boards is left
untouched thanks to the separated lists of DMI board names.
Signed-off-by: Julien ROBIN <julien.robin28@free.fr>
Link: https://lore.kernel.org/r/1c00f906-8500-41d5-be80-f9092b6a49f1@free.fr
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In order to protect the platform_profile_handler from API consumers,
allocate it in platform_profile_register() and modify it's signature
accordingly.
Remove the platform_profile_handler from all consumer drivers and
replace them with a pointer to the class device, which is
now returned from platform_profile_register().
Replace *pprof with a pointer to the class device in the rest of
exported symbols.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-16-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace platform_profile_register() with it's device managed version.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-15-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace platform_profile_register() with it's device managed version.
While at it, pass inspur_wmi_priv to the class device as drvdata and
replace uses of container_of() with dev_get_drvdata().
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-14-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace platform_profile_register() with it's device managed version.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-13-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch was used to add TAS2781 devices on SPI support in sound/pci/hda.
It use ACPI node descript about parameters of TAS2781 on SPI, it like:
Scope (_SB.PC00.SPI0)
{
Device (GSPK)
{
Name (_HID, "TXNW2781") // _HID: Hardware ID
Method (_CRS, 0, NotSerialized)
{
Name (RBUF, ResourceTemplate ()
{
SpiSerialBusV2 (...)
SpiSerialBusV2 (...)
}
}
}
}
And in platform/x86/serial-multi-instantiate.c, those spi devices will be
added into system as a single SPI device, so TAS2781 SPI driver will
probe twice for every single SPI device. And driver will also parser
mono DSP firmware binary and RCA binary for itself.
The code support Realtek as the primary codec.
In patch version-10, add multi devices firmware binary support,
to compatble with windows driver, they can share same firmware binary.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20241216122008.15425-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace platform_profile_register() with it's device managed version.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-12-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace platform_profile_register() with it's device managed version.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-11-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace platform_profile_register() with it's device managed version.
Also replace pr_err with dev_err in case of error and make the error
message more user-friendly.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-10-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace platform_profile_register() with it's device managed version.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-9-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace platform_profile_register() with it's device managed version.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-8-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace platform_profile_register() with it's device managed version.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-7-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a `probe` callback to platform_profile_ops, which lets drivers
initialize the choices member manually. This is a step towards
unexposing the struct platform_profile_handler from the consumer
drivers.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-6-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace *profile_get and *profile_set members with a general *ops
member.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-5-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Devices can now set drvdata to the class device, thus passing the
platform_profile_handler to callbacks is unnecessary. Instead pass the
class device.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-4-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add *drvdata to platform_profile_register() signature and assign it to
the class device.
While at it, pass specific driver state as drvdata to replace uses of
container_of() with dev_get_drvdata().
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS_ENABLE and
KEY_CAMERA_ACESS_DISABLE. When the camera toggle switch was hit,
the lenovo-wmi-camera driver would report an event code.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250115022825.101986-1-aichao@kylinos.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add predator_v4 quirk for the Acer Nitro AN515-58 to enable fan speed
monitoring and platform_profile handling.
Signed-off-by: Hridesh MG <hridesh699@gmail.com>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250113-platform_profile-v4-5-23be0dff19f1@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Migrate the OC handling in acer_toggle_turbo() to the new helper
function for issuing the SetGamingMiscSetting WMI call.
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Hridesh MG <hridesh699@gmail.com>
Link: https://lore.kernel.org/r/20250113-platform_profile-v4-2-23be0dff19f1@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Improve the platform profile handling by using WMI calls to fetch the
current platform profile instead of directly accessing it from the EC.
This is beneficial because the EC address differs for certain laptops.
Link: https://lore.kernel.org/platform-driver-x86/d7be714c-3103-42ee-ad15-223a3fe67f80@gmx.de/
Co-developed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Hridesh MG <hridesh699@gmail.com>
Link: https://lore.kernel.org/r/20250113-platform_profile-v4-1-23be0dff19f1@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The F11 key on the new Lenovo Thinkpad T14 Gen 5, T16 Gen 3, and P14s
Gen 5 laptops includes a symbol showing a smartphone and a laptop
chained together. According to the user manual, it starts the Microsoft
Phone Link software used to connect to Android/iOS devices and relay
messages/calls or sync data.
These laptops send the 0x1320 hkey event when the key is pressed. Map
this event to the new KEY_LINK_PHONE keycode.
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Link: https://lore.kernel.org/r/20241114173930.44983-3-illia@yshyn.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently the platform filter cannot access any driver-specific state
which forces drivers installing a i8042 filter to have at least some
kind of global pointer for their filter.
Allow callers of i8042_install_filter() to submit a context pointer
which is then passed to the i8042 filter. This frees drivers from the
responsibility of having to manage this global pointer themself.
Also introduce a separate type for the i8042 filter (i8042_filter_t)
so that the function definitions can stay compact.
Tested on a Dell Inspiron 3505.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250113221314.435812-1-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Unfortunately the SMOxxxx ACPI device does not contain the i2c-address
of the accelerometer. So a DMI product-name to address mapping table
is used.
Add support to have the kernel probe for the i2c-address for models
which are not on the list.
The new probing code sits behind a new probe_i2c_addr module parameter,
which is disabled by default because probing might be dangerous.
Link: https://lore.kernel.org/linux-i2c/4820e280-9ca4-4d97-9d21-059626161bfc@molgen.mpg.de/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250106123259.45970-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HW clock_measure counter info is passed to the driver from ACPI.
Create a new sub-directory for clock_measure events and provide
read access to the user. Writes are blocked since the fields are RO.
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/6ea0699497479dfde0a52fcb28aef55aee1bbc0b.1736413033.git.shravankr@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for programming any counter to monitor the cycle count.
This will allow the user to repurpose and dedicate any of the counters
in the block to counting cycles.
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/bd7747897cf1ce77e2e39e271cac21684830f7e7.1736413033.git.shravankr@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
intel_punit_ipc_simple_command() was added in 2015 by
commit fdca4f16f5 ("platform:x86: add Intel P-Unit mailbox IPC driver")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241221234807.160473-1-linux@treblig.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reorder variable declaration from longest to shortest. Standarize
show/store method names of WMAX's sysfs groups.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250105153019.19206-8-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Define zone_attrs statically and initialize zone_attribute_group with
platform driver's .dev_groups.
Drop match_zone() and instead pass a `location` argument to previous
show/store methods to access the correct `zone` LED state. On top of
that rename zone_set() -> zone_store() to be more consistent with sysfs
conventions.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250105153019.19206-7-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix logic to support GOOG0004 device without CRS section.
Instead of failing, assume there are not memory mapped EC registers.
Fixes: be4fccb5e1 ("platform/chrome: cros_ec_lpc: Support direct EC register memory access")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20250114202122.2352277-1-gwendal@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The yt2_1380_fc_serdev_probe() function calls devm_serdev_device_open()
before setting the client ops via serdev_device_set_client_ops(). This
ordering can trigger a NULL pointer dereference in the serdev controller's
receive_buf handler, as it assumes serdev->ops is valid when
SERPORT_ACTIVE is set.
This is similar to the issue fixed in commit 5e700b384e
("platform/chrome: cros_ec_uart: properly fix race condition") where
devm_serdev_device_open() was called before fully initializing the
device.
Fix the race by ensuring client ops are set before enabling the port via
devm_serdev_device_open().
Note, serdev_device_set_baudrate() and serdev_device_set_flow_control()
calls should be after the devm_serdev_device_open() call.
Fixes: b2ed33e8d4 ("platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250111180951.2277757-1-chenyuan0y@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The dell_uart_bl_serdev_probe() function calls devm_serdev_device_open()
before setting the client ops via serdev_device_set_client_ops(). This
ordering can trigger a NULL pointer dereference in the serdev controller's
receive_buf handler, as it assumes serdev->ops is valid when
SERPORT_ACTIVE is set.
This is similar to the issue fixed in commit 5e700b384e
("platform/chrome: cros_ec_uart: properly fix race condition") where
devm_serdev_device_open() was called before fully initializing the
device.
Fix the race by ensuring client ops are set before enabling the port via
devm_serdev_device_open().
Note, serdev_device_set_baudrate() and serdev_device_set_flow_control()
calls should be after the devm_serdev_device_open() call.
Fixes: 484bae9e4d ("platform/x86: Add new Dell UART backlight driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250111180118.2274516-1-chenyuan0y@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes and new HW support:
- amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side
- intel: power-domains: Clearwater Forest support
- intel/pmc: Skip SSRAM setup when no additional devices are present
- ISST: Clearwater Forest support
The following is an automated shortlog grouped by driver:
amd/pmc:
- Only disable IRQ1 wakeup where i8042 actually enabled it
intel/pmc:
- Fix ioremap() of bad address
intel: power-domains:
- Add Clearwater Forest support
ISST:
- Add Clearwater Forest to support list
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ4EthAAKCRBZrE9hU+XO
MY3zAPsEwcPckYuK5vuh3Q3S52VpZnJnErzvEPCgoL6gh0mMrgEArnzvAjfoFxYf
xk1Bp9HpoiZNesNO9vWUO7AEm3gTiww=
=txVF
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Match IRQ1 wakeup disable with the enable on i8042 side
- intel: power-domains: Clearwater Forest support
- intel/pmc: Skip SSRAM setup when no additional devices are present
- ISST: Clearwater Forest support"
* tag 'platform-drivers-x86-v6.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel/pmc: Fix ioremap() of bad address
platform/x86: ISST: Add Clearwater Forest to support list
platform/x86/intel: power-domains: Add Clearwater Forest support
platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it
Devices with hdmi_mux, amplifier or deepslp quirks create a sysfs group
for each available feature. To accomplish this, helper create/remove
functions were called on module init, but they had the following
problems:
- Create helpers called remove helpers on failure, which in turn tried
to remove the sysfs group that failed to be created
- If group creation failed mid way, previous successfully created groups
were not cleaned up
- Module exit only removed hdmi_mux group
To improve this, drop all helpers and let the platform driver manage these
sysfs groups, while controlling visibility with their respective quirks.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250105153019.19206-6-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
parse_rgb() now takes struct color_platform instead of struct
platform_zone to support upcoming refactor.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250105153019.19206-5-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Place Lighting Control State logic next to other attributes of the same
sysfs group.
While at it, rename:
store_control_state() -> lighting_control_state_store()
show_control_state() -> lighting_control_state_show()
Replace DEVICE_ATTR() with DEVICE_ATTR_RW() and do a general style
cleanup.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250105153019.19206-4-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Module initialization fails if platform device fails to register so it's
always not NULL at exit.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250105153019.19206-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the Acer Predator PT16-72 to acer_quirks to provide support
for the turbo button and predator_v4 interfaces.
Tested-by: Eric Johnsten <ejohnsten@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250107175652.3171-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are no users left.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250104-firmware-attributes-simplify-v1-6-949f9709e405@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The usage of the lifecycle functions is not necessary anymore.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250104-firmware-attributes-simplify-v1-5-949f9709e405@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The usage of the lifecycle functions is not necessary anymore.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250104-firmware-attributes-simplify-v1-4-949f9709e405@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The usage of the lifecycle functions is not necessary anymore.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250104-firmware-attributes-simplify-v1-3-949f9709e405@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The module core already guarantees that a module can only be unloaded
after all other modules using its symbols have been unloaded.
As it's already the responsibility of the drivers using
firmware_attributes_class to clean up their devices before unloading,
the lifetime of the firmware_attributes_class can be bound to the
lifetime of the module.
This enables the direct usage of firmware_attributes_class from the
drivers, without having to go through the lifecycle functions,
leading to simplifications for both the subsystem and its users.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250104-firmware-attributes-simplify-v1-2-949f9709e405@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The header firmware_attributes_class.h uses 'struct class'. It should
also include the necessary dependency header.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250104-firmware-attributes-simplify-v1-1-949f9709e405@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors.[1]
[1]: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Nitin Joshi <nitjoshi@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250107021507.4786-1-nitjoshi@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The AMD SFH driver includes APIs to export SRA sensor data. This data is
utilized by the AMD PMF driver to transmit SRA data to the PMF TA,
enabling the AMD PMF driver to implement the output actions specified by
the PMF TA.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20241217151627.757477-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
SMN access was bolted into amd_nb mostly as convenience. This has
limitations though that require incurring tech debt to keep it working.
Move SMN access to the newly introduced AMD Node driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> # pdx86
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> # PMF, PMC
Link: https://lore.kernel.org/r/20241206161210.163701-11-yazen.ghannam@amd.com
Add support to access EC memory region HOST command and ACPI memory
region directly.
The memory region comes from the CRS ACPI resource descriptor.
The driver retrieves the memory information by adding a resource walker
for the CRS region. If a memory region is found, it is mapped and the
driver uses a new set of read/write primitives to access the EC doorbell
and external registers.
Once the memory is mapped, it belongs to the driver:
grep GOOG0004 /proc/iomem
fe0b0000-fe0bffff : GOOG0004:00
We can verify the communication is established checking the EC version,
or monitoring the commands using the cros-ec kernel tracer.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20250107174514.2748108-3-gwendal@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Remove cros_ec_lpc_ops global variable, since EC specific info can be
stored in the device private structure, introduced in
commit e4dbf9d65e ("platform/chrome: cros_ec_lpc: add a "quirks" system").
Add ec_lpc pointer to read/write function to be able to access ec
specific data.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20250107174514.2748108-2-gwendal@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
In pmc_core_ssram_get_pmc(), the physical addresses for hidden SSRAM
devices are retrieved from the MMIO region of the primary SSRAM device.
If additional devices are not present, the address returned is zero.
Currently, the code does not check for this condition, resulting in
ioremap() incorrectly attempting to map address 0.
Add a check for a zero address and return 0 if no additional devices
are found, as it is not an error for the device to be absent.
Fixes: a01486dc4b ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250106174653.1497128-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to SST support list by
adding to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Clearwater Forest support (INTEL_ATOM_DARKMONT_X) to tpmi_cpu_ids
to support domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
Fixes: 8e60615e89 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name
[ij: edited the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Make battery_modes a map between tokens and enum power_supply_charge_type
values instead of between tokens and strings and use the new
power_supply_charge_types_show/_parse() helpers for show()/store()
to ensure that things are handled in the same way as in other drivers.
This also changes battery_supported_modes to be a bitmap of charge-types
(enum power_supply_charge_type values) rather then a bitmap of indices
into battery_modes[].
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241221125140.345776-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes and new HW support:
- hp-wmi: Add HP OMEN 8 to thermal profile list and use timer quirk
- mlx-platform: Fix PCI device refcount leaks
- thinkpad-acpi: Support a new platform profile toggle hotkey
The following is an automated shortlog grouped by driver:
hp-wmi:
- mark 8A15 board for timed OMEN thermal profile
mlx-platform:
- call pci_dev_put() to balance the refcount
thinkpad-acpi:
- Add support for hotkey 0x1401
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ3LkMAAKCRBZrE9hU+XO
MYibAQCuGx8LrrUNL6dyiQgAMsEbHCK2HmmmS7VyiKBGW6cLPgD/aVGPJ/rmsIe9
BjKm/HzwPzbaND4Ru0QWnAd+1hRDRwE=
=mWbU
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"hp-wmi:
- mark 8A15 board for timed OMEN thermal profile
mlx-platform:
- call pci_dev_put() to balance the refcount
thinkpad-acpi:
- Add support for hotkey 0x1401"
* tag 'platform-drivers-x86-v6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad-acpi: Add support for hotkey 0x1401
platform/x86: hp-wmi: mark 8A15 board for timed OMEN thermal profile
platform/x86: mlx-platform: call pci_dev_put() to balance the refcount
Replace platform_profile_register() with it's device managed version.
Drop remove_thermal_profile() because it's no longer needed.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20241224140131.30362-5-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Only check EC for MKBP events when the ACPI notify value indicates the
notify is due to an MKBP host event. This reduces unnecessary queries to
the EC.
Notify value 0x80 is reserved for devices specific notifies. It is used
by many devices to indicate various events. It's only used by cros_ec
for MKBP events.
Signed-off-by: Rob Barnes <robbarnes@google.com>
Link: https://lore.kernel.org/r/20241218015759.3558830-1-robbarnes@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-chrome-v1-1-92249c4bc295@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
After applying 4c03a44e26 ("arm64: dts: mediatek: mt8195-cherry: Remove
keyboard-backlight node"), there are no users for using the OF match.
Instead, the device is added via drivers/mfd/cros_ec_dev.c by
970c3a6b7a ("mfd: cros_ec: Register keyboard backlight subdevice").
Remove the OF match.
Link: https://lore.kernel.org/r/20241206031405.1711996-2-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Remove the retry of the get protocol info command. It is not needed
anymore, because RWSIG continue command is send before start of the
probing. That assures the EC device is ready in RW and there is no
need to try again because FPMCU is not fully booted.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Link: https://lore.kernel.org/r/20241206091514.2538350-3-dawidn@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
There are EC devices, like FPMCU, that use RWSIG as a method of
authenticating RW section. After the authentication succeeds, EC device
waits some time before jumping to RW. EC can be probed before the jump,
which means there is a time window after jump to RW in which EC won't
respond, because it is not initialized. It can cause a communication
errors after probing.
To avoid such problems, send the RWSIG continue command first, which
skips waiting for the jump to RW. Send the command more times, to make
sure EC is ready in RW before the start of the actual probing process. If
a EC device doesn't support the RWSIG, it will respond with invalid
command error code and probing will continue as usual.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Link: https://lore.kernel.org/r/20241206091514.2538350-2-dawidn@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
F8 mode key on Lenovo 2025 platforms use a different key code.
Adding support for the new keycode 0x1401.
Tested on X1 Carbon Gen 13 and X1 2-in-1 Gen 10.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241227231840.21334-1-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP OMEN 8 (2022), corresponding to a board ID of 8A15, supports OMEN
thermal profile and requires the timed profile quirk.
Upon adding this ID to both the omen_thermal_profile_boards and
omen_timed_thermal_profile_boards, significant bump in performance can be
observed. For instance, SilverBench (https://silver.urih.com/) results
improved from ~56,000 to ~69,000, as a result of higher power draws (and
thus core frequencies) whilst under load:
Package Power:
- Before the patch: ~65W (dropping to about 55W under sustained load).
- After the patch: ~115W (dropping to about 105W under sustained load).
Core Power:
- Before: ~60W (ditto above).
- After: ~108W (ditto above).
Add 8A15 to omen_thermal_profile_boards and
omen_timed_thermal_profile_boards to improve performance.
Signed-off-by: Xi Xiao <1577912515@qq.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://lore.kernel.org/r/20241226062207.3352629-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Altmodes with cros_ec are either automatically entered by the EC or
entered by the AP if TBT or USB4 are supported on the system. Due to the
security risk of PCIe tunneling, TBT modes should not be auto entered by
the kernel at this time and will require user intervention.
With this change, a userspace program will need to explicitly activate
the thunderbolt mode on the port and partner in order to enter the mode
and the thunderbolt driver will not automatically enter when a partner
is connected.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20241213153543.v5.8.Ic14738918e3d026fa2d85e95fb68f8e07a0828d0@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mux configuration is often the final piece of mode entry and can be used
to determine whether a partner altmode is active. When mux configuration
is done, use the active port altmode's SVID to set the partner active
field for all partner alt modes.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20241213153543.v5.5.I083bf9188947be8cb7460211cfdf3233370a28f6@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unbreak ACPI EC support on LoongArch that has been broken earlier
in this development cycle (Huacai Chen).
-----BEGIN PGP SIGNATURE-----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=o1pK
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
Instead of using the `goto label; mutex_unlock()` pattern use
`guard(mutex)` which will release the mutex when it goes out of scope.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241217194027.1189038-3-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Instead of using the `goto label; mutex_unlock()` pattern use
`guard(mutex)` which will release the mutex when it goes out of scope.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241217194027.1189038-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Commit a6021aa24f ("ACPI: EC: make EC support compile-time
conditional") only enable ACPI_EC on X86 by default, but the embedded
controller is also widely used on LoongArch laptops so we also enable
ACPI_EC for LoongArch.
The laptop driver cannot work without EC, so also update the dependency
of LOONGSON_LAPTOP to let it depend on APCI_EC.
Fixes: a6021aa24f ("ACPI: EC: make EC support compile-time conditional")
Reported-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20241217073704.3339587-1-chenhuacai@loongson.cn
[ rjw: Added Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
mlxplat_pci_fpga_device_init() calls pci_get_device() but does not
release the refcount on error path. Call pci_dev_put() on the error path
and in mlxplat_pci_fpga_device_exit() to fix this.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 02daa222fb ("platform: mellanox: Add initial support for PCIe based programming logic device")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20241216022538.381209-1-joe@pf.is.s.u-tokyo.ac.jp
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Introduce support for passing custom BIOS inputs to the PMF-TA to assess
BIOS input policy conditions. The PMF driver will adjust system settings
based on these BIOS input conditions and their corresponding output
actions.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241205101937.2547351-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-mellanox-v1-1-b6fe4f68e2ca@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The backlight subsystem has gotten its own power constants. Replace
FB_BLANK_UNBLANK with BACKLIGHT_POWER_ON.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20241213100647.200598-1-tzimmermann@suse.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Until now the wmi-bmof driver had to allocate the binary sysfs
attribute dynamically since its size depends on the bmof buffer
returned by the firmware.
Use the new .bin_size() callback to avoid having to do this memory
allocation.
Tested on a Asus Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241206215650.2977-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The driver now fails to link when the power supply core is missing
or in a loadable module:
_64-linux/bin/x86_64-linux-ld: drivers/platform/x86/intel/bytcrc_pwrsrc.o: in function `crc_pwrsrc_irq_handler':
bytcrc_pwrsrc.c:(.text+0x2aa): undefined reference to `power_supply_changed'
x86_64-linux-ld: drivers/platform/x86/intel/bytcrc_pwrsrc.o: in function `crc_pwrsrc_psy_get_property':
bytcrc_pwrsrc.c:(.text+0x2f6): undefined reference to `power_supply_get_drvdata'
x86_64-linux-ld: drivers/platform/x86/intel/bytcrc_pwrsrc.o: in function `crc_pwrsrc_probe':
bytcrc_pwrsrc.c:(.text+0x644): undefined reference to `devm_power_supply_register'
Add the appropriate dependency for it.
Fixes: 0130ec83c5 ("platform/x86/intel: bytcrc_pwrsrc: Optionally register a power_supply dev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241216083409.1885677-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the accelerometer address for the following laptop models
to lis3lv02d_devices[]:
Dell Latitude E6330
Dell Latitude E6430
Dell XPS 15 9550
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241209183557.7560-4-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Various Dell laptops have an lis3lv02d freefall/accelerometer sensor.
The lis3lv02d chip has an interrupt line as well as an I2C connection to
the system's main SMBus.
The lis3lv02d is described in the ACPI tables by an SMO88xx ACPI device,
but the SMO88xx ACPI fwnodes are incomplete and only list an IRQ resource.
So far this has been worked around with some SMO88xx specific quirk code
in the generic i2c-i801 driver, but it is not necessary to handle the Dell
specific instantiation of i2c_client-s for SMO88xx ACPI devices there.
The kernel already instantiates platform_device-s for these with an
acpi:SMO88xx modalias. The drivers/platform/x86/dell/dell-smo8800.c
driver binds to this platform device but this only deals with
the interrupt resource. Add a drivers/platform/x86/dell/dell-lis3lv02d.c
which will matches on the same acpi:SMO88xx modaliases and move
the i2c_client instantiation from the generic i2c-i801 driver there.
Moving the i2c_client instantiation has the following advantages:
1. This moves the SMO88xx ACPI device quirk handling away from the generic
i2c-i801 module which is loaded on all Intel x86 machines to a module
which will only be loaded when there is an ACPI SMO88xx device.
2. This removes the duplication of the SMO88xx ACPI Hardware ID (HID) table
between the i2c-i801 and dell-smo8800 drivers.
3. This allows extending the quirk handling by adding new code and related
module parameters to the dell-lis3lv02d driver, without needing to modify
the i2c-i801 code.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20241209183557.7560-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the SMO88xx acpi_device_ids to a new dell-smo8800-ids.h header,
so that these can be shared with the new dell-lis3lv02d code.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241209183557.7560-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
W=1 build triggers this warning:
drivers/platform/x86/intel/plr_tpmi.c:315:55: error: ‘snprintf’ output
may be truncated before the last format character
[-Werror=format-truncation=]
315 | snprintf(name, sizeof(name), "domain%d", i);
| ^
drivers/platform/x86/intel/plr_tpmi.c:315:17: note: ‘snprintf’ output
between 8 and 17 bytes into a destination of size 16
315 | snprintf(name, sizeof(name), "domain%d", i);
Inspecting the code tells that maximum i in intel_plr_probe() will fit
into u8 because it comes from:
struct intel_tpmi_pfs_entry {
...
u64 num_entries:8;
...but compiler does not know that. Saving one byte in name[] at the
expense of a warning with W=1 seems a bad trade so simply make it
name[17].
Link: https://lore.kernel.org/r/20241210140115.1375-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-5-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-4-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-3-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-2-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
While at it switch from the custom DCDBAS_BIN_ATTR_RW() to the identical
BIN_ATTR_RW() macro.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-1-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes and new HW support:
- alienware-wmi: Add support for Alienware m16 R1 AMD.
- alienware-wmi: Do not setup legacy LED control with X and G Series.
- intel/ifs: Clearwater Forest support.
- intel/vsec: Panther Lake support.
- p2sb: Do not hide the device if BIOS left it unhidden.
- touchscreen_dmi: Add SARY Tab 3 tablet information.
The following is an automated shortlog grouped by driver:
alienware-wmi:
- Adds support to Alienware m16 R1 AMD
- Fix X Series and G Series quirks
intel/ifs:
- Add Clearwater Forest to CPU support list
intel/vsec:
- Add support for Panther Lake
p2sb:
- Do not scan and remove the P2SB device when it is unhidden
- Factor out p2sb_read_from_cache()
- Introduce the global flag p2sb_hidden_by_bios
- Move P2SB hide and unhide code to p2sb_scan_and_cache()
touchscreen_dmi:
- Add info for SARY Tab 3 tablet
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ2BF8wAKCRBZrE9hU+XO
Mbg6AQDjQpJpnKfHqindXx7JSr9uzjLq7CeDmjX/q6gZ8fJ3LgD+LxvbJLxAeNX8
4sOcyxlGTyoxdeW6MqIFnDWcd24qiQs=
=4DMQ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi:
- Add support for Alienware m16 R1 AMD
- Do not setup legacy LED control with X and G Series
- intel/ifs: Clearwater Forest support
- intel/vsec: Panther Lake support
- p2sb: Do not hide the device if BIOS left it unhidden
- touchscreen_dmi: Add SARY Tab 3 tablet information
* tag 'platform-drivers-x86-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/vsec: Add support for Panther Lake
platform/x86/intel/ifs: Add Clearwater Forest to CPU support list
platform/x86: touchscreen_dmi: Add info for SARY Tab 3 tablet
p2sb: Do not scan and remove the P2SB device when it is unhidden
p2sb: Move P2SB hide and unhide code to p2sb_scan_and_cache()
p2sb: Introduce the global flag p2sb_hidden_by_bios
p2sb: Factor out p2sb_read_from_cache()
alienware-wmi: Adds support to Alienware m16 R1 AMD
alienware-wmi: Fix X Series and G Series quirks
If the LED gamma correction feature is missing in the MCU firmware,
inform about this in the MCU firmware probe function instead of LED
driver probe function, so that all the feature checks are in one place.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20241111100355.6978-10-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
When reading MCU firmware features, check also for the LED panel
brightness change interrupt feature, and suggest upgrading the firmware
if it is missing.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20241111100355.6978-9-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Move the command execution functions from the turris-omnia-mcu platform
driver private header to the global turris-omnia-mcu-interface.h header,
so that they can be used by the LED driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20241111100355.6978-2-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to the x86 match table of
Intel In Field Scan (IFS) driver, enabling IFS functionality on this
processor.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241210203152.1136463-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There's no info about the OEM behind the tablet, only online stores
listing. This tablet uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB
of storage.
Signed-off-by: Huy Minh <buingoc67@gmail.com>
Link: https://lore.kernel.org/r/20241210154500.32124-1-buingoc67@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
As multiple platform profile handlers can now be registered, the quirks
to avoid registering amd-pmf as a handler are no longer necessary.
Drop them.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-22-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
