* power-supply core
- introduce power supply extensions, which allows adding properties to
a power supply device from a separate driver. This will be used
initially to extend the generic ACPI charger/battery driver with
vendor extensions for charge thresholds.
- convert all drivers from power_supply_for_each_device to new
power_supply_for_each_psy(), which avoids lots of casting being
done in the drivers.
- avoid LED trigger like values in uevent for POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR
- introduce POWER_SUPPLY_PROP_CHARGE_TYPES, which is similar to the
POWER_SUPPLY_PROP_CHARGE_TYPE property, but also lists the available
options on the specific platform
* power-supply drivers
- dell-laptop: use new power_supply_charge_types_show/_parse helpers
- stc3117: new driver for equally named fuel gauge chip
- bq24190: add support for new POWER_SUPPLY_PROP_CHARGE_TYPES
- bq24190: add BQ24297 support
- bq27xxx: add voltage min design for bq27000/bq27200
- cros_charge-control: convert to new power supply extension API
- multiple drivers: constify 'struct bin_attribute'
- ds2782: convert to device managed resources
- max1720x: add charge full property
- max1720x: support extra thermistor temperatures
- max17042: add max77705 support
- ip5xxx-power: add support for IP5306
- ltc4162-l-charger: add ltc4162-f/s and ltc4015 support
- gpio-charger: support for default charge current limit
- misc. small cleanups and fixes
* reset drivers
- at91-poweroff: add sam9x7 support
-----BEGIN PGP SIGNATURE-----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=dx5S
-----END PGP SIGNATURE-----
Merge tag 'for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power supply extensions, which allows adding properties
to a power supply device from a separate driver. This will be used
initially to extend the generic ACPI charger/battery driver with
vendor extensions for charge thresholds.
- convert all drivers from power_supply_for_each_device to new
power_supply_for_each_psy(), which avoids lots of casting being
done in the drivers.
- avoid LED trigger like values in uevent for
POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR
- introduce POWER_SUPPLY_PROP_CHARGE_TYPES, which is similar to the
POWER_SUPPLY_PROP_CHARGE_TYPE property, but also lists the
available options on the specific platform
Power-supply drivers
- dell-laptop: use new power_supply_charge_types_show/_parse helpers
- stc3117: new driver for equally named fuel gauge chip
- bq24190: add support for new POWER_SUPPLY_PROP_CHARGE_TYPES
- bq24190: add BQ24297 support
- bq27xxx: add voltage min design for bq27000/bq27200
- cros_charge-control: convert to new power supply extension API
- multiple drivers: constify 'struct bin_attribute'
- ds2782: convert to device managed resources
- max1720x: add charge full property
- max1720x: support extra thermistor temperatures
- max17042: add max77705 support
- ip5xxx-power: add support for IP5306
- ltc4162-l-charger: add ltc4162-f/s and ltc4015 support
- gpio-charger: support for default charge current limit
- misc small cleanups and fixes
Reset drivers:
- at91-poweroff: add sam9x7 support"
* tag 'for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (77 commits)
power: supply: max1720x: add support for reading internal and thermistor temperatures
power: supply: ltc4162l: Use GENMASK macro in bitmask operation
power: supply: max17042: add max77705 fuel gauge support
dt-bindings: power: supply: max17042: add max77705 support
power: supply: add undervoltage health status property
power: supply: max17042: add platform driver variant
power: supply: max17042: make interrupt shared
power: reset: keystone: Use syscon_regmap_lookup_by_phandle_args
power: supply: Use str_enable_disable-like helpers
platform/x86: dell-laptop: Use power_supply_charge_types_show/_parse() helpers
power: supply: bq2415x_charger: Immediately reschedule delayed work on notifier events
power: supply: Add STC3117 fuel gauge unit driver
dt-bindings: power: supply: Add STC3117 Fuel Gauge
power: supply: ug3105_battery: Let the core handle POWER_SUPPLY_PROP_TECHNOLOGY
power: supply: gpio-charger: add support for default charge current limit
dt-bindings: power: supply: gpio-charger: add support for default charge current limit
power: supply: Use power_supply_external_power_changed() in __power_supply_changed_work()
power: supply: core: fix build of extension sysfs group if CONFIG_SYSFS=n
power: supply: bq2415x_charger: report charging state changes to userspace
bq27xxx: add voltage min design for bq27000 and bq27200
...
Currently the platform filter cannot access any driver-specific state
which forces drivers installing a i8042 filter to have at least some
kind of global pointer for their filter.
Allow callers of i8042_install_filter() to submit a context pointer
which is then passed to the i8042 filter. This frees drivers from the
responsibility of having to manage this global pointer themself.
Also introduce a separate type for the i8042 filter (i8042_filter_t)
so that the function definitions can stay compact.
Tested on a Dell Inspiron 3505.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250113221314.435812-1-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Make battery_modes a map between tokens and enum power_supply_charge_type
values instead of between tokens and strings and use the new
power_supply_charge_types_show/_parse() helpers for show()/store()
to ensure that things are handled in the same way as in other drivers.
This also changes battery_supported_modes to be a bitmap of charge-types
(enum power_supply_charge_type values) rather then a bitmap of indices
into battery_modes[].
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241221125140.345776-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68 ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The dell battery patch added dell_send_request_for_tokenid() and
dell_set_std_token_value(), which encapsulates a very common pattern
when SMBIOS queries are addressed to token->location. This calls them
in various places outside of the dell laptop code, allowing us to delete
a bunch of code.
Also some very minor cleanups:
- mark the kbd init functions as __init
- don't read buffer.output unless dell_send_request() was successful.
- actually return errors from micmute_led_set/mute_led_set instead of
always returning 0.
Only minor behavior changes; the delayed read of buffer.output and
actually returning errors for the brightness_set_blocking hooks.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240820033335.4f68b162@5400
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Dell BIOS allows you to set custom charging modes, which is useful
in particular for extending battery life. This adds support for tweaking
those various settings from Linux via sysfs knobs. One might, for
example, have their laptop plugged into power at their desk the vast
majority of the time and choose fairly aggressive battery-saving
settings (eg, only charging once the battery drops below 50% and only
charging up to 80%). When leaving for a trip, it would be more useful
to instead switch to a standard charging mode (top off at 100%, charge
any time power is available). Rebooting into the BIOS to change the
charging mode settings is a hassle.
For the Custom charging type mode, we reuse the common
charge_control_{start,end}_threshold sysfs power_supply entries. The
BIOS also has a bunch of other charging modes (with varying levels of
usefulness), so this also adds a 'charge_type' sysfs entry that maps the
standard values to Dell-specific ones.
This work is based on a patch by Perry Yuan <perry_yuan@dell.com> and
Limonciello Mario <Mario_Limonciello@Dell.com> submitted back in 2020.
Hans de Goede:
s/charge_type/charge_types/ since charge_types_show() used the new
charge_types power-supply property output format.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240820033005.09e03af1@5400
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move the dell_send_request and dell_fill_request symbols into smbios-base
so that they can be used in multiple modules.
Signed-off-by: Lyndon Sanche <lsanche@lyndeno.ca>
Link: https://lore.kernel.org/r/20240529174843.13226-3-lsanche@lyndeno.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since 64f67b5240 ("leds: trigger: audio: Add an activate callback to
ensure the initial brightness is set") the audio triggers have an
activate callback which sets the LED brightness as soon as the
(default) trigger is bound to the LED device. So we can remove the
call to ledtrig_audio_get.
Positive side effect: There's no code dependency to ledtrig-audio any
longer, what allows to remove some Kconfig dependencies.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/daef7331-dcb4-4b3a-802e-656629486b4c@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some platforms have the speaker-mute led and
current driver doesn't control it.
If the platform support the control of speaker-mute led, register it
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Link: https://lore.kernel.org/r/20230308062414.1048913-1-koba.ko@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use the `PLATFORM_DEVID_NONE` constant instead of
hard-coding -1 when creating a platform device.
No functional changes are intended.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20220930104857.2796923-1-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Latitude 7520 supports AC timeouts, but it has no KBD_LED_AC_TOKEN
and so changes to stop_timeout appear to have no effect if the laptop
is plugged in.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220426120827.12363-1-gabriele.mzt@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
add support for Dell privacy driver for the Dell units equipped
hardware privacy design, which protect users privacy of audio and
camera from hardware level. Once the audio or camera privacy mode
activated, any applications will not get any audio or video stream
when user pressed ctrl+F4 hotkey, audio privacy mode will be
enabled, micmute led will be also changed accordingly
The micmute led is fully controlled by hardware & EC(embedded controller)
and camera mute hotkey is Ctrl+F9. Currently design only emits
SW_CAMERA_LENS_COVER event while the camera lens shutter will be
changed by EC & HW(hardware) control
*The flow is like this:
1) User presses key. HW does stuff with this key (timeout timer is started)
2) WMI event is emitted from BIOS to kernel
3) WMI event is received by dell-privacy
4) KEY_MICMUTE emitted from dell-privacy
5) Userland picks up key and modifies kcontrol for SW mute
6) Codec kernel driver catches and calls ledtrig_audio_set
7) dell-privacy notifies EC, the timeout is cancelled and the HW mute
is activated. If the EC is not notified then the HW mic mute will
activate when the timeout triggers, just a bit later than with the
active ack.
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210506115605.1504-1-Perry_Yuan@Dell.com
[hdegoede@redhat.com: Rework Kconfig/Makefile bits + other small fixups]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A user without a Dell system doesn't need to pick any of these
drivers.
Users with a Dell system can enable this submenu and all drivers
behind it will be enabled.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210203195832.2950605-1-mario.limonciello@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
