Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250417074648.81528-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
All models with the "AWCC" WMAX device support monitoring fan speed and
temperature sensors. Expose this feature through the HWMON interface.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-7-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add config entries for each WMI driver managed by the alienware-wmi
module to be able to conditionally compile them.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-14-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Various Dell laptops have an lis3lv02d freefall/accelerometer sensor.
The lis3lv02d chip has an interrupt line as well as an I2C connection to
the system's main SMBus.
The lis3lv02d is described in the ACPI tables by an SMO88xx ACPI device,
but the SMO88xx ACPI fwnodes are incomplete and only list an IRQ resource.
So far this has been worked around with some SMO88xx specific quirk code
in the generic i2c-i801 driver, but it is not necessary to handle the Dell
specific instantiation of i2c_client-s for SMO88xx ACPI devices there.
The kernel already instantiates platform_device-s for these with an
acpi:SMO88xx modalias. The drivers/platform/x86/dell/dell-smo8800.c
driver binds to this platform device but this only deals with
the interrupt resource. Add a drivers/platform/x86/dell/dell-lis3lv02d.c
which will matches on the same acpi:SMO88xx modaliases and move
the i2c_client instantiation from the generic i2c-i801 driver there.
Moving the i2c_client instantiation has the following advantages:
1. This moves the SMO88xx ACPI device quirk handling away from the generic
i2c-i801 module which is loaded on all Intel x86 machines to a module
which will only be loaded when there is an ACPI SMO88xx device.
2. This removes the duplication of the SMO88xx ACPI Hardware ID (HID) table
between the i2c-i801 and dell-smo8800 drivers.
3. This allows extending the quirk handling by adding new code and related
module parameters to the dell-lis3lv02d driver, without needing to modify
the i2c-i801 code.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20241209183557.7560-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- alienware-wmi: WMAX thermal interface support
- amd/hsmp: Split ACPI and platform device based drivers
- amd/x3d_vcache: X3D frequency/cache mode switching support
- asus-wmi: Thermal policy fixes
- intel/pmt: Disable C1 auto-demotion in suspend to allow
entering the deepest C-states
- intel-hid: Fix volume buttons on Thinkpad X12 Detachable
Tablet Gen 1
- intel_scu_ipc: Replace "workaround" with 32-bit IO
- panasonic-laptop: Correct *_show() function error handling
- p2sb: Gemini Lake P2SB devfn correction
- think-lmi: Admin/System certificate authentication support
- wmi: Disable WMI devices for shutdown, refactoring
continues
- x86-android-tablets: Vexia EDU ATLA 10 tablet support
- platform/surface: Surface Pro 9 5G (Arm/QCOM) support
- Miscellaneous cleanups / refactoring / improvements
Expected conflicts:
- hsmp driver split into two vs constifying bin_attribute [1]
[1] https://lore.kernel.org/all/20241107212645.41252436@canb.auug.org.au/
The following is an automated shortlog grouped by driver:
alienware-wmi:
- added force module parameters
- added platform profile support
- Adds support to Alienware x17 R2
- alienware_wmax_command() is now input size agnostic
- create_thermal_profile() no longer brute-forces IDs
- extends the list of supported models
- fixed indentation and clean up
- Fix spelling mistake "requieres" -> "requires"
- order alienware_quirks[] alphabetically
- WMAX interface documentation
amd: amd_3d_vcache:
- Add AMD 3D V-Cache optimizer driver
- Add sysfs ABI documentation
amd/hsmp:
- Add new error code and error logs
- Change generic plat_dev name to hsmp_pdev
- Change the error type
- Convert amd_hsmp_rdwr() to a function pointer
- Create hsmp/ directory
- Create separate ACPI, plat and common drivers
- Create wrapper function init_acpi()
- Make hsmp_pdev static instead of global
- mark hsmp_msg_desc_table[] as maybe_unused
- Move ACPI code to acpi.c
- Move platform device specific code to plat.c
- Move structure and macros to header file
- Use dev_groups in the driver structure
- Use name space while exporting module symbols
amd/pmf:
- Switch to platform_get_resource() and devm_ioremap_resource()
- Use dev_err_probe() to simplify error handling
asus-laptop:
- prefer strscpy() over strcpy()
asus-wmi:
- Fix inconsistent use of thermal policies
- Use platform_profile_cycle()
classmate-laptop:
- Replace snprintf in show functions with sysfs_emit
compal-laptop:
- use sysfs_emit() instead of sprintf()
dell-dcdbase:
- Replace snprintf in show functions with sysfs_emit
Documentation: alienware-wmi:
- Describe THERMAL_INFORMATION operation 0x02
eeepc-laptop:
- use sysfs_emit() instead of sprintf()
hp: hp-bioscfg:
- remove redundant if statement
intel:
- Add 'intel' prefix to the modules automatically
intel-hid:
- fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
intel/pmc:
- Disable C1 auto-demotion during suspend
- Refactor platform resume functions to use cnl_resume()
intel/pmt:
- allow user offset for PMT callbacks
- Correct the typo 'ACCCESS_LOCAL'
intel_scu_ipc:
- Convert to check for errors first
- Don't use "proxy" headers
- Replace workaround by 32-bit IO
- Save a copy of the entire struct intel_scu_ipc_data
- Simplify code with cleanup helpers
- Unify the flow in pwr_reg_rdwr()
intel/vsec:
- Remove a useless mutex
MAINTAINERS:
- adjust file entry in INTEL TPMI DRIVER
- Change AMD PMF driver status to "Supported"
- Update ISHTP ECLITE maintainer entry
p2sb:
- Cache correct PCI bar for P2SB on Gemini Lake
panasonic-laptop:
- Return errno correctly in show callback
surface: aggregator_registry:
- Add Surface Pro 9 5G
Switch back to struct platform_driver::
- remove()
think-lmi:
- Add certificate as mechanism
- Allow empty admin password
- improve check if BIOS account security enabled
- Multi-certificate support
wmi:
- Implement proper shutdown handling
- Introduce to_wmi_driver()
- Remove wmi_block_list
- Replace dev_to_wdev() with to_wmi_device()
x86: acer-wmi:
- remove unused macros
x86-android-tablets:
- Add get_i2c_adap_by_handle() helper
- Add support for getting i2c_adapter by PCI parent devname()
- Add support for Vexia EDU ATLA 10 tablet
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZz3IswAKCRBZrE9hU+XO
McdKAQCY9gIuqtHpYK0QIQYMoZOWhpiCzfZ96DDHqt4Wknh6NgD/YY6eESyDokyB
4BkujKwqo3cdGNPjIBy41jnNjekNsw8=
=QEd2
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- alienware WMAX thermal interface support
- Split ACPI and platform device based amd/hsmp drivers
- AMD X3D frequency/cache mode switching support
- asus thermal policy fixes
- Disable C1 auto-demotion in suspend to allow entering the deepest
C-states
- Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
- Replace intel_scu_ipc "workaround" with 32-bit IO
- Correct *_show() function error handling in panasonic-laptop
- Gemini Lake P2SB devfn correction
- think-lmi Admin/System certificate authentication support
- Disable WMI devices for shutdown, refactoring continues
- Vexia EDU ATLA 10 tablet support
- Surface Pro 9 5G (Arm/QCOM) support
- Misc cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits)
platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake
platform/x86: panasonic-laptop: Return errno correctly in show callback
Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02
alienware-wmi: create_thermal_profile() no longer brute-forces IDs
alienware-wmi: Adds support to Alienware x17 R2
alienware-wmi: extends the list of supported models
alienware-wmi: order alienware_quirks[] alphabetically
platform/x86/intel/pmt: allow user offset for PMT callbacks
platform/x86/amd/hsmp: Change the error type
platform/x86/amd/hsmp: Add new error code and error logs
platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation
platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver
intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused
platform/x86: asus-wmi: Use platform_profile_cycle()
platform/x86: asus-wmi: Fix inconsistent use of thermal policies
platform/x86: hp: hp-bioscfg: remove redundant if statement
MAINTAINERS: Update ISHTP ECLITE maintainer entry
platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet
platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname()
...
Implements platform profile support for Dell laptops with new WMAX thermal
interface, present on some Alienware X-Series, Alienware M-Series and
Dell's G-Series laptops. This interface is suspected to be used by
Alienware Command Center (AWCC), which is not available for linux
systems, to manage thermal profiles.
This implementation makes use of three WMI methods, namely
THERMAL_CONTROL, THERMAL_INFORMATION and GAME_SHIFT_STATUS, which take
u32 as input and output arguments. Each method has a set of supported
operations specified in their respective enums.
Not all models with WMAX WMI interface support these methods. Because of
this, models have to manually declare support through new quirks
`thermal` for THERMAL_CONTROL and THERMAL_INFORMATION and `gmode` for
GAME_SHIFT_STATUS.
Wrappers written for these methods support multiple operations.
THERMAL_CONTROL switches thermal modes through operation
ACTIVATE_PROFILE. Available thermal codes are auto-detected at runtime
and matched against a list of known thermal codes:
Thermal Table "User Selectable Thermal Tables" (USTT):
BALANCED 0xA0
BALANCED_PERFORMANCE 0xA1
COOL 0xA2
QUIET 0xA3
PERFORMANCE 0xA4
LOW_POWER 0xA5
Thermal Table Basic:
QUIET 0x96
BALANCED 0x97
BALANCED_PERFORMANCE 0x98
PERFORMANCE 0x99
Devices are known to implement only one of these tables without mixing
their thermal codes.
The fact that the least significant digit of every thermal code is
consecutive of one another is exploited to efficiently match codes
through arrays.
Autodetection of available codes is done through operation LIST_IDS of
method THERMAL_INFORMATION. This operation lists fan IDs, CPU sensor ID,
GPU sensor ID and available thermal profile codes, *in that order*. As
number of fans and thermal codes is very model dependent, almost every
ID is scanned and matched based on conditions found on
is_wmax_thermal_code(). The known upper bound for the number of IDs is
13, corresponding to a device that have 4 fans, 2 sensors and 7 thermal
codes.
Additionally G-Series laptops have a key called G-key, which (with AWCC
proprietary driver) switches the thermal mode to an special mode named
GMODE with code 0xAB and changes Game Shift Status to 1. Game Shift is a
mode the manufacturer claims, increases gaming performance.
GAME_SHIFT_STATUS method is used to mimic this behavior when selecting
PLATFORM_PROFILE_PERFORMANCE option.
All of these profiles are known to only change fan speed profiles,
although there are untested claims that some of them also change power
profiles.
Activating a thermal mode with method THERMAL_CONTROL may cause short
hangs. This is a known problem present on every platform.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241030001124.7589-1-kuurtb@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The embedded controller code is mainly used on x86 laptops and cannot
work without PC style I/O port access.
Make this a user-visible configuration option that is default enabled
on x86 but otherwise disabled, and that can never be enabled unless
CONFIG_HAS_IOPORT is also available.
The empty stubs in internal.h help ignore the EC code in configurations
that don't support it. In order to see those stubs, the sbshc code also
has to include this header and drop duplicate declarations.
All the direct callers of ec_read/ec_write already had an x86
dependency and now also need to depend on APCI_EC.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241011061948.3211423-1-arnd@kernel.org
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
hp-wmi-sensors: Check if WMI event data exists before accessing it
ltc2991: fix register bits defines
-----BEGIN PGP SIGNATURE-----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=sSGh
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.11-rc7' into review-hans
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75 ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
The Dell BIOS allows you to set custom charging modes, which is useful
in particular for extending battery life. This adds support for tweaking
those various settings from Linux via sysfs knobs. One might, for
example, have their laptop plugged into power at their desk the vast
majority of the time and choose fairly aggressive battery-saving
settings (eg, only charging once the battery drops below 50% and only
charging up to 80%). When leaving for a trip, it would be more useful
to instead switch to a standard charging mode (top off at 100%, charge
any time power is available). Rebooting into the BIOS to change the
charging mode settings is a hassle.
For the Custom charging type mode, we reuse the common
charge_control_{start,end}_threshold sysfs power_supply entries. The
BIOS also has a bunch of other charging modes (with varying levels of
usefulness), so this also adds a 'charge_type' sysfs entry that maps the
standard values to Dell-specific ones.
This work is based on a patch by Perry Yuan <perry_yuan@dell.com> and
Limonciello Mario <Mario_Limonciello@Dell.com> submitted back in 2020.
Hans de Goede:
s/charge_type/charge_types/ since charge_types_show() used the new
charge_types power-supply property output format.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240820033005.09e03af1@5400
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The dell-uart-backlight driver supports backlight control on Dell All In
One (AIO) models using a backlight controller board connected to an UART.
In DSDT this uart port will be defined as:
Name (_HID, "DELL0501")
Name (_CID, EisaId ("PNP0501")
Now the first AIO has turned up which has not only the DSDT bits for this,
but also an actual controller attached to the UART, yet it is not using
this controller for backlight control.
Use the acpi_video_get_backlight_type() function from the ACPI video-detect
code to check if the dell-uart-backlight driver should actually be used.
This allows reusing the existing ACPI video-detect infra to override
the backlight control method on the commandline or with DMI quirks.
Fixes: 484bae9e4d ("platform/x86: Add new Dell UART backlight driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240814190159.15650-3-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some Dell laptops support configuration of preset fan modes through
smbios tables.
If the platform supports these fan modes, set up platform_profile to
change these modes. If not supported, skip enabling platform_profile.
Signed-off-by: Lyndon Sanche <lsanche@lyndeno.ca>
Link: https://lore.kernel.org/r/20240529174843.13226-4-lsanche@lyndeno.ca
[ij: Adjust #includes into alphabetical order]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Dell All In One (AIO) models released after 2017 use a backlight controller
board connected to an UART.
In DSDT this uart port will be defined as:
Name (_HID, "DELL0501")
Name (_CID, EisaId ("PNP0501")
Instead of having a separate ACPI device with an UartSerialBusV2() resource
to model the backlight-controller, which would be the standard way to do
this.
The acpi_quirk_skip_serdev_enumeration() has special handling for this
and it will make the serial port code create a serdev controller device
for the UART instead of a /dev/ttyS0 char-dev. It will also create
a dell-uart-backlight driver platform device for this driver to bind too.
This new kernel module contains 2 drivers for this:
1. A simple platform driver which creates the actual serdev device
(with the serdev controller device as parent)
2. A serdev driver for the created serdev device which exports
the backlight functionality uses a standard backlight class device.
Reported-by: Roman Bogoyev <roman@computercheck.com.au>
Tested-by: Roman Bogoyev <roman@computercheck.com.au>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Co-developed-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240513144603.93874-2-hdegoede@redhat.com
Since 64f67b5240 ("leds: trigger: audio: Add an activate callback to
ensure the initial brightness is set") the audio triggers have an
activate callback which sets the LED brightness as soon as the
(default) trigger is bound to the LED device. So we can remove the
call to ledtrig_audio_get.
Positive side effect: There's no code dependency to ledtrig-audio any
longer, what allows to remove some Kconfig dependencies.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/daef7331-dcb4-4b3a-802e-656629486b4c@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This file documents a sysfs interface that is intended for systems
management software. It does NOT document any kind of kernel driver
API. It is also not meant to be used directly by system administrators
or users.
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231221124816.2978000-3-vegard.nossum@oracle.com
Thanks to bugreport 216655 on bugzilla triggered by the
dell-smm-hwmon driver, the contents of the sensor buffers
could be almost completely decoded.
Add an hwmon interface for exposing the fan and thermal
sensor values. Since the WMI interface can be quite slow
on some machines, the sensor buffers are cached for 1 second
to lessen the performance impact.
The debugfs interface remains in place to aid in reverse-engineering
of unknown sensor types and the thermal buffer.
Tested-by: Antonín Skala <skala.antonin@gmail.com>
Tested-by: Gustavo Walbon <gustavowalbon@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230209211503.2739-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The dell-wmi-ddv driver adds support for reading
the current temperature and ePPID of ACPI batteries
on supported Dell machines.
Since the WMI interface used by this driver does not
do any input validation and thus cannot be used for probing,
the driver depends on the ACPI battery extension machanism
to discover batteries.
The driver also supports a debugfs interface for retrieving
buffers containing fan and thermal sensor information.
Since the meaing of the content of those buffers is currently
unknown, the interface is meant for reverse-engineering and
will likely be replaced with an hwmon interface once the
meaning has been understood.
The driver was tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220927204521.601887-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86/dell/Kconfig is only sourced if X86_PLATFORM_DEVICES is set,
so it does not need to depend on it.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220620145628.5882-3-hdegoede@redhat.com
dell-wmi-descriptor only provides symbols to other drivers.
These drivers already select dell-wmi-descriptor when needed.
This fixes an issue where dell-wmi-descriptor is compiled as a module
with localyesconfig on a non-Dell machine.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20211113080551.61860-1-linux@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
DELL_WMI_PRIVACY is a feature toggle for the main dell-wmi driver,
so it must depend on the Kconfig option which enables the main
dell-wmi driver.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211011132338.407571-1-hdegoede@redhat.com
When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there
is a linker error since the LEDS trigger code is built as a loadable
module. This happens because DELL_WMI_PRIVACY is a bool that depends
on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous.
ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get'
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Perry Yuan <Perry.Yuan@dell.com>
Cc: Dell.Client.Kernel@dell.com
Cc: platform-driver-x86@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210918044829.19222-1-rdunlap@infradead.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ACPI core in conjunction with platform driver core provides
an infrastructure to enumerate ACPI devices. Use it in order
to remove a lot of boilerplate code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Tested-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210803194039.35083-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update Dell WMI sysman driver to use newly implemented helper module.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-2-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
add support for Dell privacy driver for the Dell units equipped
hardware privacy design, which protect users privacy of audio and
camera from hardware level. Once the audio or camera privacy mode
activated, any applications will not get any audio or video stream
when user pressed ctrl+F4 hotkey, audio privacy mode will be
enabled, micmute led will be also changed accordingly
The micmute led is fully controlled by hardware & EC(embedded controller)
and camera mute hotkey is Ctrl+F9. Currently design only emits
SW_CAMERA_LENS_COVER event while the camera lens shutter will be
changed by EC & HW(hardware) control
*The flow is like this:
1) User presses key. HW does stuff with this key (timeout timer is started)
2) WMI event is emitted from BIOS to kernel
3) WMI event is received by dell-privacy
4) KEY_MICMUTE emitted from dell-privacy
5) Userland picks up key and modifies kcontrol for SW mute
6) Codec kernel driver catches and calls ledtrig_audio_set
7) dell-privacy notifies EC, the timeout is cancelled and the HW mute
is activated. If the EC is not notified then the HW mic mute will
activate when the timeout triggers, just a bit later than with the
active ack.
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210506115605.1504-1-Perry_Yuan@Dell.com
[hdegoede@redhat.com: Rework Kconfig/Makefile bits + other small fixups]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A user without a Dell system doesn't need to pick any of these
drivers.
Users with a Dell system can enable this submenu and all drivers
behind it will be enabled.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210203195832.2950605-1-mario.limonciello@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
