The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-1-6a6891338aae@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
remove the second #include <linux/seq_file.h>
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/202312151810+0800-wangjinchao@xfusion.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Existing Qualcomm SoCs have the LPASS pin controller slew rate control
in separate register, however this will change with upcoming Qualcomm
SoCs. The slew rate will be part of the main register for pin
configuration, thus second device IO address space is not needed.
Prepare for supporting new SoCs by adding flag customizing the driver
behavior for slew rate.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231013145935.220945-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Setting slew rate for each pin will grow with upcoming Qualcomm SoCs,
so split the code responsible for this into separate function for easier
readability and maintenance.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231013145935.220945-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
New drivers:
- Realtek RTD family pin control driver and RTD1619B,
RTD1319D and RTD1315E subdrivers.
- Nuvoton NPCM8xx combined pin control and GPIO driver.
- Amlogic T7 pin control driver.
- Renesas RZ/G3S pin control driver.
Improvements:
- A number of additional UART groups added to the Mediatek
MT7981 driver.
- MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125
and SDM660.
- Extra GPIO banks for the Sunxi H616.
- MLSP I2C6 function support in Qualcomm MSM8226.
- Some __counted_by() annotations for dynamic arrays.
- Ongoing work to make remove() return void.
- LSBC groups and functions in the Renesas R8A7778.
-----BEGIN PGP SIGNATURE-----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=vonG
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No pin control core changes this time.
New drivers:
- Realtek RTD family pin control driver and RTD1619B, RTD1319D and
RTD1315E subdrivers
- Nuvoton NPCM8xx combined pin control and GPIO driver
- Amlogic T7 pin control driver
- Renesas RZ/G3S pin control driver
Improvements:
- A number of additional UART groups added to the Mediatek MT7981
driver
- MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660
- Extra GPIO banks for the Sunxi H616
- MLSP I2C6 function support in Qualcomm MSM8226
- Some __counted_by() annotations for dynamic arrays
- Ongoing work to make remove() return void
- LSBC groups and functions in the Renesas R8A7778"
* tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
pinctrl: Use device_get_match_data()
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent
dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes
dt-bindings: pinctrl: brcm: Ensure all child node properties are documented
pinctrl: renesas: rzn1: Convert to platform remove callback returning void
pinctrl: renesas: rzg2l: Add RZ/G3S support
dt-bindings: pinctrl: renesas: Document RZ/G3S SoC
pinctrl: renesas: rzg2l: Add support for different DS values on different groups
pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration
pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S
pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets
pinctrl: renesas: rzg2l: Index all registers based on port offset
pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()
pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions
pinctrl: intel: fetch community only when we need it
pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
pinctrl: cherryview: Convert to platform remove callback returning void
pinctrl: sprd-sc9860: Convert to platform remove callback returning void
pinctrl: qcom/msm: Convert to platform remove callback returning void
pinctrl: qcom/lpi: Convert to platform remove callback returning void
...
The Qualcomm LPASS LPI pin controller driver uses one lock for guarding
Read-Modify-Write code for slew rate registers. However the pin
configuration and muxing registers have exactly the same RMW code but
are not protected.
Pin controller framework does not provide locking here, thus it is
possible to trigger simultaneous change of pin configuration registers
resulting in non-atomic changes.
Protect from concurrent access by re-using the same lock used to cover
the slew rate register. Using the same lock instead of adding second
one will make more sense, once we add support for newer Qualcomm SoC,
where slew rate is configured in the same register as pin
configuration/muxing.
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013145705.219954-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
To convert all those qcom pinctrl drivers, make msm_pinctrl_remove()
return void (instead of zero) and use .remove_new in all drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231009162510.335208-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230714174901.4062397-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some platforms provide a single clock source to all LPASS peripherals,
others provide two, and there are probably others that provide it through
magic invisible-to-Linux wires.
Rely on bindings to mandate the adequate number of clocks necessary.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230714-topic-lpass_lpi_cleanup-v1-1-dc18b5bd14f7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When choosing GPIO function for pins, use the same glitch-free method as
main TLMM pinctrl-msm.c driver in msm_pinmux_set_mux(). This replicates
the commit d21f4b7ffc ("pinctrl: qcom: Avoid glitching lines when we
first mux to output") to LPASS pin controller with same justification.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The set_mux callback in SoC TLMM driver (pinctrl-msm.c) uses "group",
not "group_num" for the number of the pin group. Other places of
lpass-lpi also use "group", so let's be consistent for code readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As per Hardware Programming Guide, when configuring pin as output,
set the pin value before setting output-enable (OE). Similar approach
is in main SoC TLMM pin controller.
Cc: <stable@vger.kernel.org>
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184923.80442-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Previously the cleanup change dropped the bitfield.h from the
pinctrl-lpass-lpi.h, since it's not used there, but forgot to
re-instantiate it in the C-file, where users are located.
Fix this by adding missed bitfield.h to the C-file.
Fixes: aa9430f8a6 ("pinctrl: qcom: Add missing header(s)")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
While at it, sort headers alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix the compilation error, caused by updating constant variable.
Hence remove redundant constant variable, which is no more useful
as per new design.
The issue is due to some unstaged changes. Fix it up.
Fixes: 36fe26843d ("pinctrl: qcom: sc7280: Add clock optional check for ADSP bypass targets")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1656489290-20881-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The idea was right but the code was breaking in next.
I assume some unstaged commit was involed. Fix it up.
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Fixes: 36fe26843d ("pinctrl: qcom: sc7280: Add clock optional check for ADSP bypass targets")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update lpass lpi pin control driver, with clock optional check for ADSP
disabled platforms. This check required for distingushing ADSP based
platforms and ADSP bypass platforms.
In case of ADSP enabled platforms, where audio is routed through ADSP
macro and decodec GDSC Switches are triggered as clocks by pinctrl
driver and ADSP firmware controls them. So It's mandatory to enable
them in ADSP based solutions.
In case of ADSP bypass platforms clock voting is optional as these macro
and dcodec GDSC switches are maintained as power domains and operated from
lpass clock drivers.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1654921357-16400-3-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update bulk clock voting to optional voting as ADSP bypass platform doesn't
need macro and decodec clocks, as these macro and dcodec GDSC switches are
maintained as power domains and operated from lpass clock drivers.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1650285427-19752-8-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver
to allow reusing the common code in the addition of subsequent
platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1650285427-19752-6-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If these fields are not set in dts, the driver will use these variables
uninitialized to set the fields. Not only will it set garbage values for
these fields, but it can overflow into other fields and break those.
In the current sm8250 dts, the dmic01 entries do not have a pullup setting,
and might not work without this change.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210304194816.3843-1-jonathan@marek.ca
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add initial pinctrl driver to support pin configuration for
LPASS (Low Power Audio SubSystem) LPI (Low Power Island) pinctrl
on SM8250.
This IP is an additional pin control block for Audio Pins on top the
existing SoC Top level pin-controller.
Hardware setup looks like:
TLMM GPIO[146 - 159] --> LPASS LPI GPIO [0 - 13]
This pin controller has some similarities compared to Top level
msm SoC Pin controller like 'each pin belongs to a single group'
and so on. However this one is intended to control only audio
pins in particular, which can not be configured/touched by the
Top level SoC pin controller except setting them as gpios.
Apart from this, slew rate is also available in this block for
certain pins which are connected to SLIMbus or SoundWire Bus.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201202163443.26499-3-srinivas.kandagatla@linaro.org
[Add some dependencies]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
