Running as nested root on MSHV imposes a different requirement
for the pci-hyperv controller.
In this setup, the interrupt will first come to the L1 (nested) hypervisor,
which will deliver it to the appropriate root CPU. Instead of issuing the
RETARGET hypercall, issue the MAP_DEVICE_INTERRUPT hypercall to L1 to
complete the setup.
Rename hv_arch_irq_unmask() to hv_irq_retarget_interrupt().
Co-developed-by: Jinank Jain <jinankjain@linux.microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/1752261532-7225-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1752261532-7225-4-git-send-email-nunodasneves@linux.microsoft.com>
Drivers could leverage the fact that the VF BAR MMIO reservation is created
for total number of VFs supported by the device by resizing the BAR to
larger size when smaller number of VFs is enabled.
Add pci_iov_vf_bar_set_size() to control the size and a
pci_iov_vf_bar_get_sizes() helper to get the VF BAR sizes that will allow
up to num_vfs to be successfully enabled with the current underlying
reservation size.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250702093522.518099-6-michal.winiarski@intel.com
When the resource representing a VF MMIO BAR reservation is created, its
size is always large enough to accommodate the BAR of all SR-IOV Virtual
Functions that can potentially be created (total VFs). If for whatever
reason it's not possible to accommodate all VFs, the resource is not
assigned and no VFs can be created.
An upcoming change will allow VF BAR size to be modified by drivers at a
later point in time, which means that the check for resource assignment is
no longer sufficient.
Add an additional check that verifies that the VF BAR for all enabled VFs
fits within the underlying reservation resource.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250702093522.518099-5-michal.winiarski@intel.com
Similar to regular resizable BARs, VF BARs can also be resized.
The capability layout is the same as PCI_EXT_CAP_ID_REBAR, which means we
can reuse most of the implementation, the only difference being resource
size calculation (which is multiplied by total VFs) and memory decoding
(which is controlled by a separate VF MSE field in SR-IOV cap).
Extend the pci_resize_resource() function to accept IOV resources.
See PCIe r6.2, sec 7.8.7.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250702093522.518099-4-michal.winiarski@intel.com
There are multiple places where conversions between IOV resources and
corresponding VF BAR numbers are done.
Extract the logic to pci_resource_num_from_vf_bar() and
pci_resource_num_to_vf_bar() helpers.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20250702093522.518099-3-michal.winiarski@intel.com
Similar to regular resizable BARs, VF BARs can also be resized, e.g. by the
system firmware or the PCI subsystem itself.
The capability layout is the same as PCI_EXT_CAP_ID_REBAR.
Add the capability ID and restore it as a part of IOV state.
See PCIe r6.2, sec 7.8.7.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20250702093522.518099-2-michal.winiarski@intel.com
- Fix a randconfig build failure in armada-370-xp irqchip
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmhzhl8ACgkQEsHwGGHe
VUozSw/9ENX6y5jnVhEGyhGHK0jaNN6FaXT6kqIXgchspzyKd9wX+d7nzk2cBCZp
YgfjpXRPP3ltEQqEvnjTjm1yKJnvmqUJgfE/r3FdjL8HlgodS1Uthyt19XLU9kqL
Dh8tn46Z6s7/0cE81YRBE8ALw6WEAuYJ7k48MYyDNfJ2GMwCQkcm1ZwkB7GvJ9Ni
hcz8aToudDydqqqfaqTMmE5lASrKKCsqqead4FGhbxTlSJt2U8syRkZwSF4OhHB3
9UxUIQo9ftkqXzUQiUbrHdfzQhqXQ7WfU+N6atbIeiACkh3kVRpLSwIAVktg+k9j
BMWjBRJBiCw8pEV3q9Wk+cI+UpbuBGiZz0QNOcBdWO7RxrSibgphaTGMoj4bBCWU
1WqCdoDvw06vAcuSe4K7wc8aERW8GkjgCTGQFsOWmQmG2StpptmfGmc52TxLOjtf
0bPGjb1NLQu8+nGJpFEjtm2Zah+Eb6aCNIvDihirWNcTw8mnOmdJgwWCc4E1WgJN
m8XcKjKzG3s5b0suQdubBViFGdbeondijiaRB6nCfJg8HYpk41Q6mm5gYmlkhYYQ
R918Io8pyJqvsBfu9LXuQmEIXpWejF/rxEkflI6bYilUbgUgqfEG3koQ1F6Y5a72
vO0aYMLfDRcorh5FkLCO6gElPZaa4KBpK14vPAuVgWtKIlXSLlM=
=znXh
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a case of recursive locking in the MSI code
- Fix a randconfig build failure in armada-370-xp irqchip
* tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Fix build with PCI disabled
PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmhxaygUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vx0ORAAn2zwwXjlSDU1V72rHX/P8aBDsmRs
R5jBD5aL+xEkoBnCguawkNl89YpKqtRo6G9yMfpSUziLvlue9F1vI82hleeHwtaZ
zcM3YdCDPz/xukQXTt2K6BniBqPNrbU0U1AXlFkjL2Gpmtp/pmr2nGn85X0OP2t8
jFGNrVFsogwPGkX7lC4LvPJozX6/PV2l4J9qF/NsuUQ8DKpYPuBjKli3C41TR13o
XA5YLIsUInvLcdfyccgmx9skCO5ZRph6WWkGF8Cvi/S67KdaYFlsGl8NTYd8KTgk
shGJjtc9Fu3w0mQMXDyMxk4EsVPT+7LZx7aJXADixa6sbOZvnRYBGJmtAqCHCgfT
6eGIzh2DIxoaEM+0F1W8ux4nmmozRTFlZPUXJBcDXuoxwicwUkZsDWuDU0WCzWia
br/uJq3queO6uemSYwMtf/UcfKLJMF4P6YG/PgRCjsD0/J1+RiclATmhaZU96H3P
qeOJ4yKhvyLQsbWW6uDxUFmv+WcHSXbOcQb1ywlLMmR8sWEf2U3F+Db0276QSFDz
Pypip9mfv0uWdf5xSuKC4FeOyOYAzopqwDgZJGK76RwB3jUnfJ6E8/yfVyhguz65
YX+NEWJ3udxK7EJXhN5Hs98xIn4xVPRjy4KtMtaXv1EjgnuxUA0/GweiMLmIbc7h
2+A3Ex1grahZuc4=
=qMbU
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Track apple Root Ports explicitly and look up the driver data from
the struct device instead of using dev->driver_data, which is used by
pci_host_common_init() for the generic host bridge pointer (Marc
Zyngier)
- Set dev->driver_data before pci_host_common_init() calls
gen_pci_init() because some drivers need it to set up ECAM mappings;
this fixes a regression on MicroChip MPFS Icicle (Geert Uytterhoeven)
- Revert the now-unnecessary use of ECAM pci_config_window.priv to
store a copy of dev->driver_data (Marc Zyngier)
* tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: ecam: Allow cfg->priv to be pre-populated from the root port device"
PCI: host-generic: Set driver_data before calling gen_pci_init()
PCI: apple: Add tracking of probed root ports
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().
While doing the conversion, I noticed that hv_compose_msi_msg() is doing
more than it is supposed to (composing message). This function also
allocates and populates struct tran_int_desc, which should be done in
hv_pcie_domain_alloc() instead. It works, but it is not the correct design.
However, I have no hardware to test such change, therefore I leave a TODO
note.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pci_msix_write_tph_tag() takes the per device MSI descriptor mutex and then
invokes msi_domain_get_virq(), which takes the same mutex again. That
obviously results in a system hang which is exposed by a softlockup or
lockdep warning.
Move the lock guard after the invocation of msi_domain_get_virq() to fix
this.
[ tglx: Massage changelog by adding a proper explanation and removing the
not really useful stacktrace ]
Fixes: d5124a9957 ("PCI/MSI: Provide a sane mechanism for TPH")
Reported-by: Jorge Lopez <jorge.jo.lopez@oracle.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jorge Lopez <jorge.jo.lopez@oracle.com>
Link: https://lore.kernel.org/all/20250708222530.1041477-1-himanshu.madhani@oracle.com
The root partition only uses VMBus when running nested.
When running on baremetal the Hyper-V PCI driver is not needed,
so do not initialize it.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/1751582677-30930-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1751582677-30930-2-git-send-email-nunodasneves@linux.microsoft.com>
Fix below warning in Hyper-V PCI driver that comes when kernel is
compiled with W=1 option. Include export.h in driver files to fix it.
* warning: EXPORT_SYMBOL() is used, but #include <linux/export.h>
is missing
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250611100459.92900-6-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250611100459.92900-6-namjain@linux.microsoft.com>
The current BAR configuration for the PCI vNTB endpoint function allocates
BARs in order, which lacks flexibility and does not account for
platform-specific quirks. This is problematic on Renesas platforms, where
BAR_4 is a fixed 256B region that ends up being used for MW1, despite being
better suited for doorbells.
Add new configfs attributes to allow users to specify arbitrary BAR
assignments. If no configuration is provided, the driver retains its
original behavior of sequential BAR allocation, preserving compatibility
with existing userspace setups.
This enables use cases such as assigning BAR_2 for MW1 and using the
limited BAR_4 for doorbells on Renesas platforms.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: adjusted the indent of EPF_NTB_BAR_W, fixed kdoc & squashed bar fix]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250603-pci-vntb-bar-mapping-v2-3-fc685a22ad28@baylibre.com
IRQchip drivers need a PCI/MSI function to map a RID to a MSI
controller deviceID namespace and at the same time retrieve the
struct device_node pointer of the MSI controller the RID is mapped
to.
Add pci_msi_map_rid_ctlr_node() to achieve this purpose.
Cc Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-25-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Rockchip controllers can support up to 5.0 GT/s link speed. But the driver
doesn't set the Target Link Speed currently. This may cause failure in
retraining the link to 5.0 GT/s if supported by the endpoint. So set the
Target Link Speed to 5.0 GT/s in the Link Control and Status Register 2.
Fixes: e77f847df5 ("PCI: rockchip: Add Rockchip PCIe controller support")
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
[mani: fixed whitespace warning, commit message rewording, added fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/0afa6bc47b7f50e2e81b0b47d51c66feb0fb565f.1751322015.git.geraldogabriel@gmail.com
Current code uses custom-defined register offsets and bitfields for the
standard PCIe registers. This creates duplication as the PCI header already
defines them. So, switch to using the standard PCIe definitions and drop
the custom ones.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: include bitfield.h]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/e81700ef4b49f584bc8834bfb07b6d8995fc1f42.1751322015.git.geraldogabriel@gmail.com
The PCI bus type does not expect its runtime PM suspend callback
function, pci_pm_runtime_suspend(), to be invoked at all during system-
wide suspend and resume, and it does not expect its runtime resume
callback function, pci_pm_runtime_resume(), to be invoked at any point
when runtime PM is disabled for the given device during system-wide
suspend and resume, so make it express that expectation by setting
power.strict_midlayer for all PCI devices in pci_pm_prepare() and
clear it in pci_pm_complete().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1925097.atdPhlSkOF@rjwysocki.net
Rename gen_pci_init() API as pci_host_common_ecam_create() and export it to
allow the PCIe controller drivers to create and configure the ECAM region.
Note that this API should only used by the drivers managing the drvdata on
their own. Rest should continue using pci_host_common_init() API.
Signed-off-by: Mayank Rana <mayank.rana@oss.qualcomm.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250616224259.3549811-3-mayank.rana@oss.qualcomm.com
Export dw_pcie_msi_host_init(), dw_pcie_msi_init(), and dw_pcie_free_msi()
APIs to allow them to be reused by the upcoming DWC based ECAM driver
implementation. Also, move MSI IRQ related initialization code to
dw_pcie_msi_init(), as this code must be executed before dw_pcie_msi_init()
API can be used with ECAM driver.
Signed-off-by: Mayank Rana <mayank.rana@oss.qualcomm.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250616224259.3549811-2-mayank.rana@oss.qualcomm.com
This reverts commit 4900454b4f.
Now that nobody relies of cfg->priv containing anything useful before the
.init() callback is used, restore the previous behaviour.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-4-maz@kernel.org
The apple driver relies on being able to directly find the matching root
port structure from the platform device that represents this port.
A previous hack stashed a pointer to the root port structure in the config
window private pointer, but that ended up relying on assumptions that break
other drivers.
Instead, bite the bullet and track the association as part of the driver
itself as a list of probed root ports.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-3-maz@kernel.org
When a PCIe device detects an error, it logs the error locally and issues
an error Message routed to the Root Complex (PCIe r6.0, sec 6.2.5). If the
Root Port or RCEC supports AER and Linux has enabled the AER interrupt,
aer_isr() traverses the relevant devices and adds those with AER errors
logged to the aer_err_info.dev[] array for error logging and recovery.
If aer_isr() finds more than AER_MAX_MULTI_ERR_DEVICES devices with AER
errors logged, it silently ignores them, and those extra devices are not
included in the recovery flow.
Emit an error message if we find more than AER_MAX_MULTI_ERR_DEVICES
devices with AER errors logged.
Testing details at link below.
Signed-off-by: Akshay Jindal <akshayaj.lkd@gmail.com>
[bhelgaas: commit log, join error message]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250619185041.73240-1-akshayaj.lkd@gmail.com
An endpoint driver configfs attributes group is added to the
epf_group list of struct pci_epf_driver by pci_epf_add_cfs() but an
added group is not removed from this list when the attribute group is
unregistered with pci_ep_cfs_remove_epf_group().
Add the missing list_del() call in pci_ep_cfs_remove_epf_group()
to correctly remove the attribute group from the driver list.
With this change, once the loop over all attribute groups in
pci_epf_remove_cfs() completes, the driver epf_group list should be
empty. Add a WARN_ON() to make sure of that.
Fixes: ef1433f717 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250624114544.342159-3-dlemoal@kernel.org
Doing a list_del() on the epf_group field of struct pci_epf_driver in
pci_epf_remove_cfs() is not correct as this field is a list head, not
a list entry. This list_del() call triggers a KASAN warning when an
endpoint function driver which has a configfs attribute group is torn
down:
==================================================================
BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198
Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319
CPU: 3 UID: 0 PID: 319 Comm: rmmod Not tainted 6.16.0-rc2 #1 NONE
Hardware name: Radxa ROCK 5B (DT)
Call trace:
show_stack+0x2c/0x84 (C)
dump_stack_lvl+0x70/0x98
print_report+0x17c/0x538
kasan_report+0xb8/0x190
__asan_report_store8_noabort+0x20/0x2c
pci_epf_remove_cfs+0x17c/0x198
pci_epf_unregister_driver+0x18/0x30
nvmet_pci_epf_cleanup_module+0x24/0x30 [nvmet_pci_epf]
__arm64_sys_delete_module+0x264/0x424
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xac/0x230
do_el0_svc+0x40/0x58
el0_svc+0x48/0xdc
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
...
Remove this incorrect list_del() call from pci_epf_remove_cfs().
Fixes: ef1433f717 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250624114544.342159-2-dlemoal@kernel.org
Move the LINK_WAIT_SLEEP_MS and LINK_WAIT_MAX_RETRIES macros to pci.h.
Prefix the macros with PCIE_ in order to avoid redefining these for
drivers that already have macros named like this.
No functional changes.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250625102347.1205584-15-cassel@kernel.org
As per PCIe r6.0, sec 6.6.1, a Downstream Port that supports Link speeds
greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link
training completes before sending a Configuration Request.
Add this delay in dw_pcie_wait_for_link(), after the link is reported as
up. The delay will only be performed in the success case where the link
came up.
DWC glue drivers that have a link up IRQ (drivers that set
use_linkup_irq = true) do not call dw_pcie_wait_for_link(), instead they
perform this delay in their threaded link up IRQ handler.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-14-cassel@kernel.org
Per PCIe r6.0, sec 6.6.1, software must generally wait a minimum of
100ms (PCIE_RESET_CONFIG_WAIT_MS) after Link training completes before
sending a Configuration Request.
Prior to 36971d6c5a ("PCI: qcom: Don't wait for link if we can detect
Link Up"), qcom used dw_pcie_wait_for_link(), which waited between 0
and 90ms after the link came up before we enumerate the bus, and this
was apparently enough for most devices.
After 36971d6c5a, qcom_pcie_global_irq_thread() started enumeration
immediately when handling the link-up IRQ, and devices (e.g., Laszlo
Fiat's PLEXTOR PX-256M8PeGN NVMe SSD) may not be ready to handle config
requests yet.
Delay PCIE_RESET_CONFIG_WAIT_MS after the link-up IRQ before starting
enumeration.
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-13-cassel@kernel.org
Per PCIe r6.0, sec 6.6.1, software must generally wait a minimum of
100ms (PCIE_RESET_CONFIG_WAIT_MS) after Link training completes before
sending a Configuration Request.
Prior to ec9fd499b9 ("PCI: dw-rockchip: Don't wait for link since
we can detect Link Up"), dw-rockchip used dw_pcie_wait_for_link(),
which waited between 0 and 90ms after the link came up before we
enumerate the bus, and this was apparently enough for most devices.
After ec9fd499b9, rockchip_pcie_rc_sys_irq_thread() started
enumeration immediately when handling the link-up IRQ, and devices
(e.g., Laszlo Fiat's PLEXTOR PX-256M8PeGN NVMe SSD) may not be ready
to handle config requests yet.
Delay PCIE_RESET_CONFIG_WAIT_MS after the link-up IRQ before starting
enumeration.
Fixes: 0e898eb8df ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Cc: Laszlo Fiat <laszlo.fiat@proton.me>
Link: https://patch.msgid.link/20250625102347.1205584-12-cassel@kernel.org
Macro PCIE_RESET_CONFIG_DEVICE_WAIT_MS was added to pci.h in commit
d5ceb9496c ("PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time
value").
Later, in commit 70a7bfb1e5 ("PCI: rockchip-host: Wait 100ms after reset
before starting configuration"), PCIE_T_RRS_READY_MS was added to pci.h.
These macros are duplicates, and represent the exact same delay in the
PCIe specification.
Since the comment above PCIE_RESET_CONFIG_WAIT_MS is strictly more correct
than the comment above PCIE_T_RRS_READY_MS, change rockchip-host to use
PCIE_RESET_CONFIG_WAIT_MS, and remove PCIE_T_RRS_READY_MS, as
rockchip-host is the only user of this macro.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-11-cassel@kernel.org
In a89c82249c ("PCI: Work around PCIe link training failures"), if the
speed limit is set to 2.5 GT/s and the retraining is successful, an attempt
will be made to lift the speed limit. One condition for lifting the speed
limit is to check whether the link speed field of the Link Control 2
register is PCI_EXP_LNKCTL2_TLS_2_5GT.
However, since de9a6c8d5d ("PCI/bwctrl: Add pcie_set_target_speed() to
set PCIe Link Speed"), the `lnkctl2` local variable does not undergo any
changes during the speed limit setting and retraining process. As a result,
the code intended to lift the speed limit is not executed.
To address this issue, adjust the position of the Link Control 2 register
read operation in the code and place it before its use.
Fixes: de9a6c8d5d ("PCI/bwctrl: Add pcie_set_target_speed() to set PCIe Link Speed")
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250123055155.22648-3-sjiwei@163.com
When pcie_failed_link_retrain() fails to retrain, it tries to revert to the
previous link speed. However it calculates that speed from the Link
Control 2 register without masking out non-speed bits first.
PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to
PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in
pcie_set_target_speed():
pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s
pci 0000:00:01.1: retraining failed
WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed
RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000
pcie_failed_link_retrain
pci_device_add
pci_scan_single_device
Mask out the non-speed bits in PCIE_LNKCTL2_TLS2SPEED() and
PCIE_LNKCAP_SLS2SPEED() so they don't incorrectly return PCI_SPEED_UNKNOWN.
Fixes: de9a6c8d5d ("PCI/bwctrl: Add pcie_set_target_speed() to set PCIe Link Speed")
Reported-by: Andrew <andreasx0@protonmail.com>
Closes: https://lore.kernel.org/r/7iNzXbCGpf8yUMJZBQjLdbjPcXrEJqBxy5-bHfppz0ek-h4_-G93b1KUrm106r2VNF2FV_sSq0nENv4RsRIUGnlYZMlQr2ZD2NyB5sdj5aU=@protonmail.com/
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiwei Sun <sunjw10@lenovo.com>
[bhelgaas: commit log, add details from https://lore.kernel.org/r/1c92ef6bcb314ee6977839b46b393282e4f52e74.1750684771.git.lukas@wunner.de]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org # v6.13+
Link: https://patch.msgid.link/20250123055155.22648-2-sjiwei@163.com
This reverts commit 631b2af2f3 ("PCI/ACPI: Fix allocated memory release
on error in pci_acpi_scan_root()").
The reverted patch causes the 'ri->cfg' and 'root_ops' resources to be
released multiple times.
When acpi_pci_root_create() fails, these resources have already been
released internally by the __acpi_pci_root_release_info() function.
Releasing them again in pci_acpi_scan_root() leads to incorrect behavior
and potential memory issues.
We plan to resolve the issue using a more appropriate fix.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aEmdnuw715btq7Q5@stanley.mountain/
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250619072608.2075475-1-qiaozhe@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The config file related to the memory windows start the numbering of
the MW from 1. The other NTB function does the same, yet the enumeration
defining the BARs of the vNTB function starts numbering the MW from 0.
Both numbering should be fine, but mixing the two is a bit confusing. The
configfs file being the interface with userspace, keep that stable and
consistently start the numbering of the MW from 1.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250603-pci-vntb-bar-mapping-v2-2-fc685a22ad28@baylibre.com
According the function documentation of epf_ntb_init_epc_bar(), the
function should return an error code on error. However, it returns -1 when
no BAR is available i.e., when pci_epc_get_next_free_bar() fails.
Return -ENOENT instead.
Fixes: e35f56bb03 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: changed err code to -ENOENT]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250603-pci-vntb-bar-mapping-v2-1-fc685a22ad28@baylibre.com
By default, the driver relies on the default hardware defined value for the
Max Link Width (MLW) capability. But if the "num-lanes" DT property is
present, assume that the chip's default capability information is incorrect
or undesired, and use the specified value instead.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded the description and comments]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250530224035.41886-3-james.quinlan@broadcom.com
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RK3588 TRM, section "11.6.1.3.3 Hot Reset and Link-Down Reset" states that:
If you want to delay link re-establishment (after reset) so that you can
reprogram some registers through DBI, you must set app_ltssm_enable =0
immediately after core_rst_n as shown in above. This can be achieved by
enable the app_dly2_en, and end-up the delay by assert app_dly2_done.
I.e. setting app_dly2_en will automatically deassert app_ltssm_enable on
a hot reset, and setting app_dly2_done will re-assert app_ltssm_enable,
re-enabling link training.
When receiving a hot reset/link-down IRQ when running in EP mode, we will
call dw_pcie_ep_linkdown(), which may update registers through DBI. Unless
link training is inhibited, these register updates race with the link
training.
To avoid the race, set PCIE_LTSSM_APP_DLY2_EN so the controller never
automatically trains the link after a link-down or hot reset interrupt.
That way any DBI updates done in the dw_pcie_ep_linkdown() path will happen
while the link is still down. Then allow link training by setting
PCIE_LTSSM_APP_DLY2_DONE
Co-developed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250613101908.2182053-2-cassel@kernel.org
The Rockchip driver contains duplicated message routing and INTx code
definitions (e.g., ROCKCHIP_PCIE_MSG_ROUTING_TO_RC,
ROCKCHIP_PCIE_MSG_CODE_ASSERT_INTA). These are already provided by the
PCI core in drivers/pci/pci.h as PCIE_MSG_TYPE_R_RC and
PCIE_MSG_CODE_ASSERT_INTA, respectively.
Remove the driver-specific definitions in favor of the core definitions
instead. This aligns the driver with the PCIe specification and reduces
maintenance overhead.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250607154913.805027-3-18255117159@163.com
The Cadence driver previously defined its own message routing enums (e.g.,
MSG_ROUTING_LOCAL) and message codes, which duplicated existing PCI core
macros (PCIE_MSG_TYPE_R_LOCAL, PCIE_MSG_CODE_ASSERT_INTA, etc.) in
drivers/pci/pci.h. These core definitions align with the PCIe r6.0 spec.
Remove the driver-specific enums and switch to the centralized PCI core
macros. This eliminates redundancy, ensures consistency, and simplifies
future updates. No functional changes are introduced.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250607154913.805027-2-18255117159@163.com
In pci_msi_update_mask(), "lock = &to_pci_dev()" does the to_pci_dev()
lookup, and there's another one buried inside msi_desc_to_pci_dev().
Introduce a local variable to remove that duplication.
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20250617-pci-msi-avoid-dup-pcidev-v1-1-ed75b0419023@kernel.org
Commit c3be50f754 ("PCI: pciehp: Ignore Presence Detect Changed caused by
DPC") sought to ignore Presence Detect Changed events occurring as a side
effect of Downstream Port Containment.
The commit awaits recovery from DPC and then clears events which occurred
in the meantime. However if the first event seen after DPC is Data Link
Layer State Changed, only that event is cleared and not Presence Detect
Changed. The object of the commit is thus defeated.
That's because pciehp_ist() computes the events to clear based on the local
"events" variable instead of "ctrl->pending_events". The former contains
the events that had occurred when pciehp_ist() was entered, whereas the
latter also contains events that have accumulated while awaiting DPC
recovery.
In practice, the order of PDC and DLLSC events is arbitrary and the delay
in-between can be several milliseconds.
So change the logic to always clear PDC events, even if they come after an
initial DLLSC event.
Fixes: c3be50f754 ("PCI: pciehp: Ignore Presence Detect Changed caused by DPC")
Reported-by: Lương Việt Hoàng <tcm4095@gmail.com>
Reported-by: Joel Mathew Thomas <proxy0@tutamail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219765#c165
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Lương Việt Hoàng <tcm4095@gmail.com>
Tested-by: Joel Mathew Thomas <proxy0@tutamail.com>
Link: https://patch.msgid.link/d9c4286a16253af7e93eaf12e076e3ef3546367a.1750257164.git.lukas@wunner.de
Change pcie_aer_disable variable to bool and update pci_no_aer()
to set it to true. Improves code readability and aligns with modern
kernel practices.
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250516165223.125083-3-18255117159@163.com
Merge the declaration and initialization of 'val' into a single statement
for clarity. This eliminates a redundant assignment operation and improves
code readability while maintaining the same functionality.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250522161533.394689-1-18255117159@163.com
The aspm_disabled and aspm_force variables are used as boolean flags.
Change their type from int to bool and update assignments to use
true/false instead of 1/0. This improves code clarity.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250517154939.139237-1-18255117159@163.com
Allow dynamic MSI-X vector allocation for pci_hyperv PCI controller
by adding support for the flag MSI_FLAG_PCI_MSIX_ALLOC_DYN and using
pci_msix_prepare_desc() to prepare the MSI-X descriptors.
Feature support added for both x86 and ARM64
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
For supporting dynamic MSI-X vector allocation by PCI controllers, enabling
the flag MSI_FLAG_PCI_MSIX_ALLOC_DYN is not enough, msix_prepare_msi_desc()
to prepare the MSI descriptor is also needed.
Export pci_msix_prepare_desc() to allow PCI controllers to support dynamic
MSI-X vector allocation.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
The RaspberryPi RP1 is a PCI multi function device containing
peripherals ranging from Ethernet to USB controller, I2C, SPI
and others.
Implement a bare minimum driver to operate the RP1, leveraging
actual OF based driver implementations for the on-board peripherals
by loading a devicetree overlay during driver probe if the RP1
node is not already present in the DT.
The peripherals are accessed by mapping MMIO registers starting
from PCI BAR1 region.
With the overlay approach we can achieve more generic and agnostic
approach to managing this chipset, being that it is a PCI endpoint
and could possibly be reused in other hw implementations. The
presented approach is also used by Bootlin's Microchip LAN966x
patchset (see link) as well, for a similar chipset.
In this case, the inclusion tree for the DT overlay is as follow
(the arrow points to the includer):
rp1-pci.dtso <---- rp1-common.dtsi
On the other hand, to ensure compatibility with downstream, this
driver can also work with a DT already comprising the RP1 node, so
the dynamically loaded overlay will not be used if the DT is already
fully defined.
The reason why this driver is contained in drivers/misc has
been paved by Bootlin's LAN966X driver, which first used the
overlay approach to implement non discoverable peripherals behind a
PCI bus. For RP1, the same arguments apply: it's not used as an SoC
since the driver code is not running on-chip and is not like an MFD
since it does not really need all the MFD infrastructure (shared regs,
etc.). So, for this particular use, misc has been proposed and deemed
as a good choice. For further details about that please check the links.
This driver is heavily based on downstream code from RaspberryPi
Foundation, and the original author is Phil Elwell.
Link: https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf
Link: https://lore.kernel.org/all/20240612140208.GC1504919@google.com/
Link: https://lore.kernel.org/all/83f7fa09-d0e6-4f36-a27d-cee08979be2a@app.fastmail.com/
Link: https://lore.kernel.org/all/2024081356-mutable-everyday-6f9d@gregkh/
Link: https://lore.kernel.org/all/20240808154658.247873-1-herve.codina@bootlin.com/
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # quirks.c, pci_ids.h
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250529135052.28398-7-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
4d4c10f763 ("PCI: Explicitly put devices into D0 when initializing")
intended to put PCI devices into D0, but in doing so unintentionally
changed runtime PM initialization not to occur on devices that don't
support PCI PM. This caused a regression in vfio-pci due to an imbalance
with its use.
Adjust the logic in pci_pm_init() so that even if PCI PM isn't supported
runtime PM is still initialized.
Fixes: 4d4c10f763 ("PCI: Explicitly put devices into D0 when initializing")
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m7e8929d6421690dc8bd6dc639d86c2b4db27cbc4
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m40d277dcdb9be64a1609a82412d1aa906263e201
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Link: https://patch.msgid.link/20250611233117.61810-1-superm1@kernel.org
Clean up the driver by removing unnecessary header includes that are no
longer referenced after the recent refactoring.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20250607160201.807043-4-18255117159@163.com
Correct the debug message for PCIE_CLIENT_INT_NFATAL_ERR from
"no fatal error" to "non fatal error interrupt received" to match the
actual interrupt semantics. This avoids confusion in log interpretation.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20250607160201.807043-3-18255117159@163.com
The renaming to the timer_*() namespace was delayed due massive conflicts
against Linux-next. Now that everything is upstream finish the conversion.
-----BEGIN PGP SIGNATURE-----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=jJaU
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
The conversion to per device MSI domains created a MSI domain with size 1
instead of sizing it to the maximum possible number of MSI interrupts for
the device. This "worked" as the subsequent allocations resized the
domain, but the recent change to move the prepare() call into the domain
creation path broke this works by chance mechanism. Size the domain
properly at creation time.
-----BEGIN PGP SIGNATURE-----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=G1bH
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
- Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM
is enabled, since there are no other entries (Hans Zhang)
* pci/controller/tegra194:
PCI: tegra194: Create debugfs directory only when CONFIG_PCIEASPM is enabled
- Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert()
deasserts in reverse order, to fix a link training regression (Jensen
Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel)
* pci/controller/rockchip:
PCI: rockchip-ep: Mark RK3399 as intx_capable
PCI: rockchip: Fix order of rockchip_pci_core_rsts
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
* pci/controller/rcar-gen4:
PCI: rcar-gen4: Document how to obtain platform firmware
PCI: rcar-gen4: set ep BAR4 fixed size
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT lacks
'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32,
and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
* pci/controller/qcom:
PCI: qcom: Add support for IPQ5018
dt-bindings: PCI: qcom: Add IPQ5018 SoC
PCI: dwc: Add support for configuring lane equalization presets
PCI: Add lane equalization register offsets
PCI: dwc: Update pci->num_lanes to maximum supported link width
PCI: of: Add of_pci_get_equalization_presets() API
- Use for_each_of_range() iterator for parsing 'ranges' (Rob Herring)
* pci/controller/mvebu:
PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard
Zhu)
- Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link();
since the DWC core does this, imx6 only needs it when retraining for a
faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some
cases, the controller can't exit 'L23 Ready' through Beacon or PERST#
deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s,
causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Save and restore the LUT setting during suspend/resume for i.MX95 SoC
PCI: imx6: Add PLL lock check for i.MX95 SoC
PCI: imx6: Add workaround for errata ERR051586
PCI: imx6: Add workaround for errata ERR051624
PCI: imx6: Toggle the core reset for i.MX95 PCIe
PCI: imx6: Call dw_pcie_wait_for_link() from start_link() callback only when required
PCI: imx6: Skip link up workaround for newer platforms
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more
robust; this will not affect the intended link width if all lanes are
functional (Wenbin Yao)
* pci/controller/dwc:
PCI: dwc: Make link training more robust by setting PORT_LOGIC_LINK_WIDTH to one lane
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the link
is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root
Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of
rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets
non-sticky registers (Shawn Lin)
- Remove unused PCIE_CLIENT_GENERAL_DEBUG definition (Hans Zhang)
- Organize register and bitfield definitions logically (Hans Zhang)
- Use rockchip_pcie_link_up() to check link up instead of open coding, and
use GENMASK() and FIELD_GET() when possible (Hans Zhang)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up() and
armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin,
meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti
(Hans Zhang)
- Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and
layerscape-gen4, mobiveil (Hans Zhang)
- Simplify j721e link-up check (Hans Zhang)
- Convert pci-host-common to a library so platforms that don't need native
host controller drivers don't need to include these helper functions
(Manivannan Sadhasivam)
* pci/controller/dw-rockchip:
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI: cadence: Simplify J721e link status check
PCI: mobiveil: Return bool from link up check
PCI: dwc: Return bool from link up check
PCI: dw-rockchip: Fix PHY function call sequence in rockchip_pcie_phy_deinit()
PCI: dw-rockchip: Use rockchip_pcie_link_up() to check link up instead of open coding
PCI: dw-rockchip: Reorganize register and bitfield definitions
PCI: dw-rockchip: Remove unused PCIE_CLIENT_GENERAL_DEBUG definition
PCI: dw-rockchip: Move rockchip_pcie_ep_hide_broken_ats_cap_rk3588() to dw_pcie_ep_ops::init()
PCI: dw-rockchip: Enable ASPM L0s capability for both RC and EP modes
PCI: dw-rockchip: Remove PCIE_L0S_ENTRY check from rockchip_pcie_link_up()
# Conflicts:
# drivers/pci/controller/pcie-apple.c
# include/linux/pci-ecam.h
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans
Zhang)
- Use shared PCIE_MSG_CODE_* definitions and remove duplicate
cdns_pcie_msg_code definitions (Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures in
some configs (Arnd Bergmann)
* pci/controller/cadence:
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
PCI: cadence: Remove duplicate message code definitions
PCI: cadence: Fix runtime atomic count underflow
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying
capabilities (Marc Zyngier)
- Directly set/clear INTx mask bits because T602x dropped the accessors
that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate T602x,
which moves them around; retain default offsets for existing DTs that
lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe because
we're allowed to sleep there (Hector Martin)
- Move register offsets into SoC-specific structure (Hector Martin)
- Add T602x PCIe support (Hector Martin)
* pci/controller/apple:
PCI: apple: Add T602x PCIe support
PCI: apple: Abstract register offsets via a SoC-specific structure
PCI: apple: Use gpiod_set_value_cansleep in probe flow
PCI: apple: Drop poll for CORE_RC_PHYIF_STAT_REFCLK
PCI: apple: Move port PHY registers to their own reg items
PCI: apple: Fix missing OF node reference in apple_pcie_setup_port
PCI: apple: Move away from INTMSK{SET,CLR} for INTx and private interrupts
PCI: apple: Dynamically allocate RID-to_SID bitmap
PCI: apple: Move over to standalone probing
PCI: ecam: Allow cfg->priv to be pre-populated from the root port device
PCI: host-generic: Extract an ECAM bridge creation helper from pci_host_common_probe()
dt-bindings: pci: apple,pcie: Add t6020 compatible string
PCI: apple: Set only available ports up
- For fixed-size BARs, retain both the actual size and the possibly larger
size allocated to accommodate iATU alignment requirements (Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space than
needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint
controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
PCI: dwc: ep: Correct PBA offset in .set_msix() callback
PCI: endpoint: pci-epf-vntb: Simplify ctrl/SPAD space allocation
PCI: endpoint: Retain fixed-size BAR size as well as aligned size
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS but
don't allow peer-to-peer transactions between Root Ports; the quirk
allows each Root Port to be in a separate IOMMU group (Huacai Chen)
* pci/virtualization:
PCI: Add ACS quirk for Loongson PCIe
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the
filename paths. Retain old deprecated symbols for compatibility, except
for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian Norris)
* pci/pwrctrl:
arm64: Kconfig: switch to HAVE_PWRCTRL
wifi: ath12k: switch to PCI_PWRCTRL_PWRSEQ
wifi: ath11k: switch to PCI_PWRCTRL_PWRSEQ
PCI/pwrctrl: Rename pwrctrl Kconfig symbols and slot module
PCI/pwrctrl: Cancel outstanding rescan work when unregistering
- Add pm_runtime_put() cleanup helper for use with __free() to
automatically drop the device usage count when a pointer goes out of
scope (Alex Williamson)
- Increment PM usage counter when probing reset methods so we don't try to
read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
* pci/pm:
PCI: Explicitly put devices into D0 when initializing
PCI: Increment PM usage counter when probing reset methods
PM: runtime: Define pm_runtime_put cleanup helper
- Fix pci_acpi_scan_root() memory leak when we fail to create a PCI bus
(Zhe Qiao)
* pci/pci-acpi:
PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()
- Ignore Presence Detect Changed caused by DPC. pciehp already ignores
Link Down/Up events caused by DPC, but on slots using in-band presence
detect, DPC causes a spurious Presence Detect Changed event (Lukas
Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports
using in-band presence detect, the reset causes a Presence Detect Changed
event, which mistakenly caused teardown and re-enumeration of the device.
Drivers may need to annotate code that resets their device (Lukas Wunner)
* pci/hotplug:
PCI: hotplug: Drop superfluous #include directives
PCI: pciehp: Ignore Link Down/Up caused by Secondary Bus Reset
PCI: pciehp: Ignore Presence Detect Changed caused by DPC
# Conflicts:
# drivers/pci/pci.h
- Remove pci_fixup_cardbus(), which has no users left (Heiner Kallweit)
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and has
been fixed by other commits (Lukas Wunner)
- Restrict visibility of pci_dev.match_driver since it's no longer used
outside the PCI core (Lukas Wunner)
* pci/enumeration:
PCI: Limit visibility of match_driver flag to PCI core
Revert "iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices"
PCI: Print the actual delay time in pci_bridge_wait_for_secondary_bus()
PCI: Use PCI_STD_NUM_BARS instead of 6
PCI: Remove pci_fixup_cardbus()
# Conflicts:
# drivers/pci/pci.h
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and
unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and
related flags since all uses have been removed (Philipp Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid', i.e.,
their behavior no longer depends on whether pcim_enable_device or
pci_enable_device() was used, and remove related code (Philipp Stanner)
* pci/devres:
PCI: Remove function pcim_intx() prototype from pci.h
PCI: Remove hybrid-devres usage warnings from kernel-doc
PCI: Remove redundant set of request functions
PCI: Remove exclusive requests flags from _pcim_request_region()
PCI: Remove pcim_request_region_exclusive()
Documentation/driver-api: Update pcim_enable_device()
PCI: Remove hybrid devres nature from request functions
PCI: Remove pcim_iounmap_regions()
mtip32xx: Remove unnecessary pcim_iounmap_regions() calls
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag
(Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may have
changed (Ilpo Järvinen)
* pci/bwctrl:
PCI: Update Link Speed after retraining
PCI/bwctrl: Replace lbms_count with PCI_LINK_LBMS_SEEN flag
Zenghui reports that since 1396e89e09 ("genirq/msi: Move prepare() call
to per-device allocation"), his Multi-MSI capable device isn't working
anymore.
This is a consequence of 15c72f824b ("PCI/MSI: Add support for per device
MSI[X] domains"), which always creates a MSI domain of size 1, even in the
presence of Multi-MSI.
While this was somehow working until then, moving the .prepare() call ends
up sizing the ITS table with a tiny value for this device, and making the
endpoint driver unhappy.
Instead, always create the domain and call the .prepare() helper with the
maximum expected size.
Fixes: 1396e89e09 ("genirq/msi: Move prepare() call to per-device allocation")
Fixes: 15c72f824b ("PCI/MSI: Add support for per device MSI[X] domains")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/all/20250603141801.915305-1-maz@kernel.org
Closes: https://lore.kernel.org/r/0b1d7aec-1eac-a9cd-502a-339e216e08a1@huawei.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmg+jmETHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXiWaCACjYSQcCXW2nnZuWUnGMJq8HD5XGBAH
tNYzOyp2Y4bXEJzfmbHv8UpJynGr3IFKybCnhm0uAQZCmiR5k4CfMvjPQXcJu9LK
7yUI/dTGrRGG7f3NClWK2vXg7ATqzRGiPuPDk2lDcP04aQQWaUMDYe5SXIgcqKyZ
cm2OVHapHGbQ7wA+xXGQcUBb6VJ5+BrQUVOqaEQyl4LURvjaQcn7rVDS0SmEi8gq
42+KDVd8uWYos5dT57HIq9UI5og3PeTvAvHsx26eX8JWNqwXLgvxRH83kstK+GWY
uG3sOm5yRbJvErLpJHnyBOlXDFNw2EBeLC1VyhdJXBR8RabgI+H/mrY3
=4bTC
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel)
- Fixes for Hyper-V UIO driver (Long Li)
- Fixes for Hyper-V PCI driver (Michael Kelley)
- Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley)
- Documentation updates for Hyper-V VMBus (Michael Kelley)
- Enhance logging for hv_kvp_daemon (Shradha Gupta)
* tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits)
Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
Documentation: hyperv: Update VMBus doc with new features and info
PCI: hv: Remove unnecessary flex array in struct pci_packet
Drivers: hv: Remove hv_alloc/free_* helpers
Drivers: hv: Use kzalloc for panic page allocation
uio_hv_generic: Align ring size to system page
uio_hv_generic: Use correct size for interrupt and monitor pages
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
arch/x86: Provide the CPU number in the wakeup AP callback
x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
PCI: hv: Get vPCI MSI IRQ domain from DeviceTree
ACPI: irq: Introduce acpi_get_gsi_dispatcher()
Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
Drivers: hv: vmbus: Get the IRQ number from DeviceTree
dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties
arm64, x86: hyperv: Report the VTL the system boots in
arm64: hyperv: Initialize the Virtual Trust Level field
Drivers: hv: Provide arch-neutral implementation of get_vtl()
Drivers: hv: Enable VTL mode for arm64
...
The j721e driver has a single platform driver that can be built-in or a
loadable module, but it calls two separate backend drivers depending on
whether it is a host or endpoint.
If the two modes are not the same, we can end up with a situation where the
built-in pci-j721e driver tries to call the modular host or endpoint
driver, which causes a link failure:
ld.lld-21: error: undefined symbol: cdns_pcie_ep_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
ld.lld-21: error: undefined symbol: cdns_pcie_host_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
Rework the dependencies so that the 'select' is done by the common Kconfig
symbol, based on which of the two are enabled. Effectively this means that
having one built-in makes the other either built-in or disabled, but all
configurations will now build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250423162523.2060405-1-arnd@kernel.org
The 'pci-j721e.c' driver is the application/glue/wrapper driver for the
Cadence PCIe Controllers on TI SoCs. Implement support for building it as a
loadable module.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-5-s-vadapalli@ti.com
Introduce the helper function cdns_pcie_ep_disable() which will undo the
configuration performed by cdns_pcie_ep_setup(). Also, export it for use
by the existing callers of cdns_pcie_ep_setup(), thereby allowing them
to cleanup on their exit path.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-4-s-vadapalli@ti.com
Introduce the helper function cdns_pcie_host_disable() which will undo
the configuration performed by cdns_pcie_host_setup(). Also, export it
for use by existing callers of cdns_pcie_host_setup(), thereby allowing
them to cleanup on their exit path.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-3-s-vadapalli@ti.com
Currently, the Cadence PCIe controller driver can be built as a built-in
module only. Since PCIe functionality is not a necessity for booting, add
support to build the Cadence PCIe driver as a loadable module as well.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-2-s-vadapalli@ti.com
No need to split the line in __pci_setup_bridge() as it is way shorter
than the limit.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250404124547.51185-1-ilpo.jarvinen@linux.intel.com
Resource fitting/assignment code checks if there's a remainder in
add_list (aka. realloc_head in the inner functions) using BUG_ON().
This problem typically results in a mere PCI device resource assignment
failure which does not warrant using BUG_ON(). The machine could well
come up usable even if this condition occurs because the realloc_head
relates to resources which are optional anyway.
Change BUG_ON() to WARN_ON_ONCE() and free the list if it's not empty.
[bhelgaas: subject]
Reported-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/linux-pci/5f103643-5e1c-43c6-b8fe-9617d3b5447c@linaro.org
Link: https://lore.kernel.org/r/20250511215223.7131-1-ilpo.jarvinen@linux.intel.com
This common library will be used as a placeholder for helper functions
shared by the host controller drivers. This avoids placing the host
controller drivers specific helpers in drivers/pci/*.c, to avoid enlarging
the kernel image on platforms that do not use host controller drivers at
all (like x86/ACPI platforms).
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250508-pcie-reset-slot-v4-3-7050093e2b50@linaro.org
A PCI device is just another peripheral in a system. So failure to
recover it, must not result in a kernel panic. So remove the TODO which
is quite misleading.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250508-pcie-reset-slot-v4-1-7050093e2b50@linaro.org
The Cadence PCIe controller driver defines message codes in enum
cdns_pcie_msg_code duplicating the existing PCIE_MSG_CODE_* definitions in
drivers/pci/pci.h. The driver only uses ASSERT_INTA and DEASSERT_INTA codes
from this enum.
Remove the redundant Cadence-specific enum definitions and use the ones
available in drivers/pci/pci.h. This helps in avoiding code duplication,
maintaining consistency with the spec, and simplifying the code
maintenance.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250401145023.22948-1-18255117159@163.com
The kdoc for pci_epc_set_msix() says:
"Invoke to set the required number of MSI-X interrupts."
The kdoc for the callback pci_epc_ops->set_msix() says:
"ops to set the requested number of MSI-X interrupts in the MSI-X
capability register"
pci_epc_ops::set_msix() does however expect the parameter 'interrupts' to
be in the encoding as defined by the Table Size field. Nowhere in the
kdoc does it say that the number of interrupts should be in Table Size
encoding.
It is very confusing that the API pci_epc_set_msix() and the callback
function pci_epc_ops::set_msix() both take a parameter named 'interrupts',
but they expect completely different encodings.
Clean up the API and the callback function to have the same semantics,
i.e. the parameter represents the number of interrupts, regardless of the
internal encoding of that value.
Also rename the parameter 'interrupts' to 'nr_irqs', in both the wrapper
function and the callback function, such that the name is unambiguous.
[bhelgaas: more specific subject]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable+noautosel@kernel.org # this is simply a cleanup
Link: https://patch.msgid.link/20250514074313.283156-14-cassel@kernel.org
The kdoc for pci_epc_set_msi() says:
"Invoke to set the required number of MSI interrupts."
The kdoc for the callback pci_epc_ops::set_msi() says:
"ops to set the requested number of MSI interrupts in the MSI capability
register"
pci_epc_ops::set_msi() does however expect the parameter 'interrupts' to be
in the encoding as defined by the Multiple Message Capable (MMC) field of
the MSI capability structure. Nowhere in the kdoc does it say that the
number of interrupts should be in MMC encoding.
It is very confusing that the API pci_epc_set_msi() and the callback
function pci_epc_ops::set_msi() both take a parameter named 'interrupts',
but they expect completely different encodings.
Clean up the API and the callback function to have the same semantics,
i.e. the parameter represents the number of interrupts, regardless of the
internal encoding of that value.
Also rename the parameter 'interrupts' to 'nr_irqs', in both the wrapper
function and the callback function, such that the name is unambiguous.
[bhelgaas: more specific subject]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable+noautosel@kernel.org # this is simply a cleanup
Link: https://patch.msgid.link/20250514074313.283156-13-cassel@kernel.org
The kdoc for pci_epc_get_msix() says:
"Invoke to get the number of MSI-X interrupts allocated by the RC"
The kdoc for the callback pci_epc_ops->get_msix() says:
"ops to get the number of MSI-X interrupts allocated by the RC from the
MSI-X capability register"
pci_epc_ops::get_msix() does however return the number of interrupts in the
encoding as defined by the Table Size field. Nowhere in the kdoc does it
say that the returned number of interrupts is in Table Size encoding.
It is very confusing that the API pci_epc_get_msix() and the callback
function pci_epc_ops::get_msix() don't return the same value.
Clean up the API and the callback function to have the same semantics,
i.e. return the number of interrupts, regardless of the internal encoding
of that value.
[bhelgaas: more specific subject]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable+noautosel@kernel.org # this is simply a cleanup
Link: https://patch.msgid.link/20250514074313.283156-12-cassel@kernel.org
The kdoc for API pci_epc_get_msi() says:
"Invoke to get the number of MSI interrupts allocated by the RC"
The kdoc for the callback pci_epc_ops::get_msi() says:
"ops to get the number of MSI interrupts allocated by the RC from
the MSI capability register"
pci_epc_ops::get_msi() does however return the number of interrupts in the
encoding as defined by the Multiple Message Enable (MME) field of the MSI
Capability structure.
Nowhere in the kdoc does it say that the returned number of interrupts is
in MME encoding. It is very confusing that the API pci_epc_get_msi() and
the callback function pci_epc_ops::get_msi() don't return the same value.
Clean up the API and the callback function to have the same semantics,
i.e. return the number of interrupts, regardless of the internal encoding
of that value.
[bhelgaas: more specific subject]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable+noautosel@kernel.org # this is simply a cleanup
Link: https://patch.msgid.link/20250514074313.283156-11-cassel@kernel.org
While cdns_pcie_ep_set_msix() writes the Table Size field correctly (N-1),
the calculation of the PBA offset is wrong because it calculates space for
(N-1) entries instead of N.
This results in the following QEMU error when using PCI passthrough on a
device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
[bhelgaas: more specific subject and commit log]
Fixes: 3ef5d16f50 ("PCI: cadence: Add MSI-X support to Endpoint driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250514074313.283156-10-cassel@kernel.org
While dw_pcie_ep_set_msix() writes the Table Size field correctly (N-1),
the calculation of the PBA offset is wrong because it calculates space for
(N-1) entries instead of N.
This results in the following QEMU error when using PCI passthrough on a
device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
[bhelgaas: more specific subject and commit log]
Fixes: 83153d9f36 ("PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250514074313.283156-9-cassel@kernel.org
When allocating the shared ctrl/SPAD space, epf_ntb_config_spad_bar_alloc()
should not try to handle the size quirks for underlying BAR, whether it is
fixed size or alignment. This is already handled by pci_epf_alloc_space().
Also, when handling the alignment, this allocates more space than
necessary. For example, with a SPAD size of 1024B and a ctrl size of 308B,
the space necessary is 1332B. If the alignment is 1MB,
epf_ntb_config_spad_bar_alloc() tries to allocate 2MB where 1MB would have
been more than enough.
Drop the handling of the BAR size quirks and let pci_epf_alloc_space()
handle that. Just make sure the 32bits SPAD register are aligned on 32bits.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250424-pci-ep-size-alignment-v5-2-2d4ec2af23f5@baylibre.com
When allocating space for an endpoint function on a BAR with a fixed size,
the size saved in 'struct pci_epf_bar.size' should be the fixed size as
expected by pci_epc_set_bar().
However, if pci_epf_alloc_space() increased the allocation size to
accommodate iATU alignment requirements, it previously saved the larger
aligned size in .size, which broke pci_epc_set_bar().
To solve this, keep the fixed BAR size in .size and save the aligned size
in a new .aligned_size for use when deallocating it.
Fixes: 2a9a801620 ("PCI: endpoint: Add support to specify alignment for buffers allocated to BARs")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: commit message fixup]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[bhelgaas: more specific subject, commit log, wrap comment to match file]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250424-pci-ep-size-alignment-v5-1-2d4ec2af23f5@baylibre.com
- new two step DMA mapping API, which is is a first step to a long path
to provide alternatives to scatterlist and to remove hacks, abuses and
design mistakes related to scatterlists; this new approach optimizes
some calls to DMA-IOMMU layer and cache maintenance by batching them,
reduces memory usage as it is no need to store mapped DMA addresses to
unmap them, and reduces some function call overhead; it is a combination
effort of many people, lead and developed by Christoph Hellwig and Leon
Romanovsky
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaDRXIQAKCRCJp1EFxbsS
RG8tAP9kgjIwMoJqfr6DC8yYraIIUuNDyhb/fZ9vPppW6Cb7aAD/cg8udjrsUu3h
iAZBIHkYuWmkx8JG7t5/lqBc4AOC1AA=
=F3TU
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.16-2025-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
"New two step DMA mapping API, which is is a first step to a long path
to provide alternatives to scatterlist and to remove hacks, abuses and
design mistakes related to scatterlists.
This new approach optimizes some calls to DMA-IOMMU layer and cache
maintenance by batching them, reduces memory usage as it is no need to
store mapped DMA addresses to unmap them, and reduces some function
call overhead. It is a combination effort of many people, lead and
developed by Christoph Hellwig and Leon Romanovsky"
* tag 'dma-mapping-6.16-2025-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
docs: core-api: document the IOVA-based API
dma-mapping: add a dma_need_unmap helper
dma-mapping: Implement link/unlink ranges API
iommu/dma: Factor out a iommu_dma_map_swiotlb helper
dma-mapping: Provide an interface to allow allocate IOVA
iommu: add kernel-doc for iommu_unmap_fast
iommu: generalize the batched sync after map interface
dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h
PCI/P2PDMA: Refactor the p2pdma mapping helpers
- Switch the MSI decriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in the
PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper API
function calls. People will never understand that APIs exist for a
reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory extensible
to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to undo
the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain creation
time to avoid redundant (and in case of ARM/GIC-V3-ITS confusing)
invocations on every allocation.
In combination with the new teardown callback this removes some ugly
hacks in the GIC-V3-ITS driver, which pretended to work around the
short comings of the core code so far. With this update the code is
correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI parent
domain creation helper and convert a bunch of (PCI/)MSI drivers over to
the modern MSI parent mechanism. This is the first step to get rid of
at least one incarnation of the three PCI/MSI management schemes.
- The usual small cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=OBMj
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI subsystem (core code and PCI):
- Switch the MSI descriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in
the PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper
API function calls. People will never understand that APIs exist
for a reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory
extensible to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to
undo the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain
creation time to avoid redundant (and in case of ARM/GIC-V3-ITS
confusing) invocations on every allocation.
In combination with the new teardown callback this removes some
ugly hacks in the GIC-V3-ITS driver, which pretended to work around
the short comings of the core code so far. With this update the
code is correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI
parent domain creation helper and convert a bunch of (PCI/)MSI
drivers over to the modern MSI parent mechanism. This is the first
step to get rid of at least one incarnation of the three PCI/MSI
management schemes.
- The usual small cleanups and improvements"
* tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
PCI/MSI: Use bool for MSI enable state tracking
PCI: tegra: Convert to MSI parent infrastructure
PCI: xgene: Convert to MSI parent infrastructure
PCI: apple: Convert to MSI parent infrastructure
irqchip/msi-lib: Honour the MSI_FLAG_NO_AFFINITY flag
irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
irqchip/gic: Convert to msi_create_parent_irq_domain() helper
genirq/msi: Add helper for creating MSI-parent irq domains
irqchip: Make irq-msi-lib.h globally available
irqchip/gic-v3-its: Use allocation size from the prepare call
genirq/msi: Engage the .msi_teardown() callback on domain removal
genirq/msi: Move prepare() call to per-device allocation
irqchip/gic-v3-its: Implement .msi_teardown() callback
genirq/msi: Add .msi_teardown() callback as the reverse of .msi_prepare()
irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map
irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
genirq/msi: Rename msi_[un]lock_descs()
...
- Consolidate on one set of functions for the interrupt domain code to
get rid of pointlessly duplicated code with only marginal different
semantics.
- Update the documentation accordingly and consolidate the coding style
of the irqdomain header.
-----BEGIN PGP SIGNATURE-----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=9nLp
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
- Large rework of the protected key crypto code to allow for asynchronous
handling without memory allocation
- Speed up system call entry/exit path by re-implementing lazy ASCE
handling
- Add module autoload support for the diag288_wdt watchdog device driver
- Get rid of s390 specific strcpy() and strncpy() implementations, and
switch all remaining users to strscpy() when possible
- Various other small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=lFqh
-----END PGP SIGNATURE-----
Merge tag 's390-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Large rework of the protected key crypto code to allow for
asynchronous handling without memory allocation
- Speed up system call entry/exit path by re-implementing lazy ASCE
handling
- Add module autoload support for the diag288_wdt watchdog device
driver
- Get rid of s390 specific strcpy() and strncpy() implementations, and
switch all remaining users to strscpy() when possible
- Various other small fixes and improvements
* tag 's390-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (51 commits)
s390/pci: Serialize device addition and removal
s390/pci: Allow re-add of a reserved but not yet removed device
s390/pci: Prevent self deletion in disable_slot()
s390/pci: Remove redundant bus removal and disable from zpci_release_device()
s390/crypto: Extend protected key conversion retry loop
s390/pci: Fix __pcilg_mio_inuser() inline assembly
s390/ptrace: Always inline regs_get_kernel_stack_nth() and regs_get_register()
s390/thread_info: Cleanup header includes
s390/extmem: Add workaround for DCSS unload diag
s390/crypto: Rework protected key AES for true asynch support
s390/cpacf: Rework cpacf_pcc() to return condition code
s390/mm: Fix potential use-after-free in __crst_table_upgrade()
s390/mm: Add mmap_assert_write_locked() check to crst_table_upgrade()
s390/string: Remove strcpy() implementation
s390/con3270: Use strscpy() instead of strcpy()
s390/boot: Use strspcy() instead of strcpy()
s390: Simple strcpy() to strscpy() conversions
s390/pkey/crypto: Introduce xflags param for pkey in-kernel API
s390/pkey: Provide and pass xflags within pkey and zcrypt layers
s390/uv: Remove uv_get_secret_metadata function
...
Commits b88cbaaa6f ("PCI/pwrctrl: Rename pwrctl files to pwrctrl") and
3f925cd628 ("PCI/pwrctrl: Rename pwrctrl functions and structures")
renamed the "pwrctl" framework to "pwrctrl" for consistency reasons.
Rename also the Kconfig symbols so that they reflect the new name while
adding entries for the deprecated ones. The old symbols can be removed once
everything that depends on them has been updated.
Note that no deprecated symbol is added for the new slot driver to avoid
having to add a user visible option.
Rename the new slot module to reflect the framework name and match the
other pwrctrl modules.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250402132634.18065-2-johan+linaro@kernel.org
It's possible to trigger use-after-free here by:
(a) forcing rescan_work_func() to take a long time and
(b) utilizing a pwrctrl driver that may be unloaded for some reason
Cancel outstanding work to ensure it is finished before we allow our data
structures to be cleaned up.
[bhelgaas: tidy commit log]
Fixes: 8f62819aaa ("PCI/pwrctl: Rescan bus on a separate thread")
Signed-off-by: Brian Norris <briannorris@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Link: https://patch.msgid.link/20250409115313.1.Ia319526ed4ef06bec3180378c9a008340cec9658@changeid
struct pci_packet contains a "message" field that is a flex array
of struct pci_message. struct pci_packet is usually followed by a
second struct in a containing struct that is defined locally in
individual functions in pci-hyperv.c. As such, the compiler
flag -Wflex-array-member-not-at-end (introduced in gcc-14) generates
multiple warnings such as:
drivers/pci/controller/pci-hyperv.c:3809:35: warning: structure
containing a flexible array member is not at the end of another
structure [-Wflex-array-member-not-at-end]
The Linux kernel intends to introduce this compiler flag in standard
builds, so the current code is problematic in generating these warnings.
The "message" field is used only to locate the start of the second
struct, and not as an array. Because the second struct can be
addressed directly, the "message" field is not really necessary.
Rather than try to fix its usage to meet the requirements of
-Wflex-array-member-not-at-end, just eliminate the field and
either directly reference the second struct, or use "pkt + 1"
when "pkt" is dynamically allocated.
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250514044440.48924-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250514044440.48924-1-mhklinux@outlook.com>
The hyperv-pci driver uses ACPI for MSI IRQ domain configuration on
arm64. It won't be able to do that in the VTL mode where only DeviceTree
can be used.
Update the hyperv-pci driver to get vPCI MSI IRQ domain in the DeviceTree
case, too.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250428210742.435282-12-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250428210742.435282-12-romank@linux.microsoft.com>
Allow userspace to read/write log ratelimits per device (including
enable/disable). Create aer/ sysfs directory to store them and any
future AER configs.
The new sysfs files are:
/sys/bus/pci/devices/*/aer/correctable_ratelimit_burst
/sys/bus/pci/devices/*/aer/correctable_ratelimit_interval_ms
/sys/bus/pci/devices/*/aer/nonfatal_ratelimit_burst
/sys/bus/pci/devices/*/aer/nonfatal_ratelimit_interval_ms
The default values are ratelimit_burst=10, ratelimit_interval_ms=5000, so
if we try to emit more than 10 messages in a 5 second period, some are
suppressed.
Update AER sysfs ABI filename to reflect the broader scope of AER sysfs
attributes (e.g. stats and ratelimits).
Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats ->
sysfs-bus-pci-devices-aer
Tested using aer-inject[1]. Configured correctable log ratelimit to 5.
Sent 6 AER errors. Observed 5 errors logged while AER stats
(cat /sys/bus/pci/devices/<dev>/aer_dev_correctable) shows 6.
Disabled ratelimiting and sent 6 more AER errors. Observed all 6 errors
logged and accounted in AER stats (12 total errors).
[1] https://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git
[bhelgaas: note fatal errors are not ratelimited, "aer_report" ->
"aer_info", replace ratelimit_log_enable toggle with *_ratelimit_interval_ms]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-21-helgaas@kernel.org
Spammy devices can flood kernel logs with AER errors and slow/stall
execution. Add per-device ratelimits for AER correctable and non-fatal
uncorrectable errors that use the kernel defaults (10 per 5s). Logging of
fatal errors is not ratelimited.
There are two AER logging entry points:
- aer_print_error() is used by DPC and native AER
- pci_print_aer() is used by GHES and CXL
The native AER aer_print_error() case includes a loop that may log details
from multiple devices, which are ratelimited individually. If we log
details for any device, we also log the Error Source ID from the Root Port
or RCEC.
If no such device details are found, we still log the Error Source from the
ERR_* Message, ratelimited by the Root Port or RCEC that received it.
The DPC aer_print_error() case is not ratelimited, since this only happens
for fatal errors.
The CXL pci_print_aer() case is ratelimited by the Error Source device.
The GHES pci_print_aer() case is via aer_recover_work_func(), which
searches for the Error Source device. If the device is not found, there's
no per-device ratelimit, so we use a system-wide ratelimit that covers all
error types (correctable, non-fatal, and fatal).
Sargun at Meta reported internally that a flood of AER errors causes RCU
CPU stall warnings and CSD-lock warnings.
Tested using aer-inject[1]. Sent 11 AER errors. Observed 10 errors logged
while AER stats (cat /sys/bus/pci/devices/<dev>/aer_dev_correctable) show
true count of 11.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git
[bhelgaas: commit log, factor out trace_aer_event() and aer_print_rp_info()
changes to previous patches, enable Error Source logging if any downstream
detail will be printed, don't ratelimit fatal errors, "aer_report" ->
"aer_info", "cor_log_ratelimit" -> "correctable_ratelimit",
"uncor_log_ratelimit" -> "nonfatal_ratelimit"]
Reported-by: Sargun Dhillon <sargun@meta.com>
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-19-helgaas@kernel.org
Return -ENOSPC error early so the usual path through add_error_device() is
the straightline code.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-18-helgaas@kernel.org
Previously aer_get_device_error_info() and aer_print_error() took a pointer
to struct aer_err_info and a pointer to a pci_dev. Typically the pci_dev
was one of the elements of the aer_err_info.dev[] array (DPC was an
exception, where the dev[] array was unused).
Convert aer_get_device_error_info() and aer_print_error() to take an index
into the aer_err_info.dev[] array instead. A future patch will add
per-device ratelimit information, so the index makes it convenient to find
the ratelimit associated with the device.
To accommodate DPC, set info->dev[0] to the DPC port before using these
interfaces.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-17-helgaas@kernel.org
Update name to reflect the broader definition of structs/variables that are
stored (e.g. ratelimits). This is a preparatory patch for adding rate limit
support.
[bhelgaas: "aer_report" -> "aer_info"]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-16-helgaas@kernel.org
Some existing logs in pci_print_aer() log with error severity by default.
Convert them to use KERN_WARNING for correctable errors and KERN_ERR for
uncorrectable errors.
[bhelgaas: commit log]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-15-helgaas@kernel.org
aer_print_error() produces output at a printk level (KERN_ERR/KERN_WARNING/
etc) that depends on the kind of error, and it calls pcie_print_tlp_log(),
which previously always produced output at KERN_ERR.
Add a "level" parameter so aer_print_error() can control the level of the
pcie_print_tlp_log() output to match.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-14-helgaas@kernel.org
When reporting an AER error, we check its type multiple times to determine
the log level for each message. Do this check only in the top-level
functions (aer_isr_one_error(), pci_print_aer()) and save the level in
struct aer_err_info.
[bhelgaas: save log level in struct aer_err_info instead of passing it
as a parameter]
Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-13-helgaas@kernel.org
As with the AER statistics, we always want to emit trace events, even if
the actual dmesg logging is rate limited.
Call trace_aer_event() immediately after pci_dev_aer_stats_incr() so both
happen before ratelimiting.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-12-helgaas@kernel.org
There are two AER logging entry points:
- aer_print_error() is used by DPC (dpc_process_error()) and native AER
handling (aer_process_err_devices()).
- pci_print_aer() is used by GHES (aer_recover_work_func()) and CXL
(cxl_handle_rdport_errors())
Both use __aer_print_error() to print the AER error bits. Previously
__aer_print_error() also incremented the AER statistics via
pci_dev_aer_stats_incr().
Call pci_dev_aer_stats_incr() early in the entry points instead of in
__aer_print_error() so we update the statistics even if the actual printing
of error bits is rate limited by a future change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-11-helgaas@kernel.org
Simplify pci_print_aer() by initializing the struct aer_err_info "info"
with a designated initializer list (it was previously initialized with
memset()) and using pci_name().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-10-helgaas@kernel.org
Previously the struct aer_err_info "e_info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.
Initialize "e_info" at declaration with a designated initializer list,
which initializes the other members to zero.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-9-helgaas@kernel.org
Move aer_print_source() earlier in the file so a future change can use it
from aer_print_error(), where it's easier to rate limit it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-8-helgaas@kernel.org
Rename aer_print_port_info() to aer_print_source() to be more descriptive.
This logs the Error Source ID logged by a Root Port or Root Complex Event
Collector when it receives an ERR_COR, ERR_NONFATAL, or ERR_FATAL Message.
[bhelgaas: aer_print_rp_info() -> aer_print_source()]
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-7-helgaas@kernel.org
Use PCI_BUS_NUM(), PCI_SLOT(), PCI_FUNC() to extract the bus number,
device, and function number directly from the Error Source ID. There's no
need to shift and mask it explicitly.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-6-helgaas@kernel.org
Previously we decoded the AER Error Source ID in aer_isr_one_error_type(),
then again in find_source_device() if we didn't find any devices with
errors logged in their AER Capabilities.
Consolidate this so we only decode and log the Error Source ID once in
aer_isr_one_error_type(). Add a "found" parameter so we can add a note
when we didn't find any downstream devices with errors logged in their AER
Capability.
This changes the dmesg logging when we found no devices with errors logged:
- pci 0000:00:01.0: AER: Correctable error message received from 0000:02:00.0
- pci 0000:00:01.0: AER: found no error details for 0000:02:00.0
+ pci 0000:00:01.0: AER: Correctable error message received from 0000:02:00.0 (no details found)
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-5-helgaas@kernel.org
aer_isr_one_error() duplicates the Error Source ID logging and AER error
processing for Correctable Errors and Uncorrectable Errors. Factor out the
duplicated code to aer_isr_one_error_type().
aer_isr_one_error() doesn't need the struct aer_rpc pointer, so pass it the
Root Port or RCEC pci_dev pointer instead.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-4-helgaas@kernel.org
DPC Error Source ID is only valid when the DPC Trigger Reason indicates
that DPC was triggered due to reception of an ERR_NONFATAL or ERR_FATAL
Message (PCIe r6.0, sec 7.9.14.5).
When DPC was triggered by ERR_NONFATAL (PCI_EXP_DPC_STATUS_TRIGGER_RSN_NFE)
or ERR_FATAL (PCI_EXP_DPC_STATUS_TRIGGER_RSN_FE) from a downstream device,
log the Error Source ID (decoded into domain/bus/device/function). Don't
print the source otherwise, since it's not valid.
For DPC trigger due to reception of ERR_NONFATAL or ERR_FATAL, the dmesg
logging changes:
- pci 0000:00:01.0: DPC: containment event, status:0x000d source:0x0200
- pci 0000:00:01.0: DPC: ERR_FATAL detected
+ pci 0000:00:01.0: DPC: containment event, status:0x000d, ERR_FATAL received from 0000:02:00.0
and when DPC triggered for other reasons, where DPC Error Source ID is
undefined, e.g., unmasked uncorrectable error:
- pci 0000:00:01.0: DPC: containment event, status:0x0009 source:0x0200
- pci 0000:00:01.0: DPC: unmasked uncorrectable error detected
+ pci 0000:00:01.0: DPC: containment event, status:0x0009: unmasked uncorrectable error detected
Previously the "containment event" message was at KERN_INFO and the
"%s detected" message was at KERN_WARNING. Now the single message is at
KERN_WARNING.
Fixes: 26e5157133 ("PCI: Add Downstream Port Containment driver")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250522232339.1525671-3-helgaas@kernel.org
Previously the struct aer_err_info "info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.
Initialize "info" at declaration so it starts as all zeros.
Fixes: 8aefa9b0d9 ("PCI/DPC: Print AER status in DPC event handling")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250522232339.1525671-2-helgaas@kernel.org
As disable_slot() takes a struct zpci_dev from the Configured to the
Standby state. In Standby there is still a hotplug slot so this is not
usually a case of sysfs self deletion. This is important because self
deletion gets very hairy in terms of locking (see for example
recover_store() in arch/s390/pci/pci_sysfs.c).
Because the pci_dev_put() is not within the critical section of the
zdev->state_lock however, disable_slot() can turn into a case of self
deletion if zPCI device event handling slips between the mutex_unlock()
and the pci_dev_put(). If the latter is the last put and
zpci_release_device() is called this then tries to remove the hotplug
slot via zpci_exit_slot() which will try to remove the hotplug slot
directory the disable_slot() is part of i.e. self deletion.
Prevent this by widening the zdev->state_lock critical section to
include the pci_dev_put() which is then guaranteed to happen with the
struct zpci_dev still in Standby state ensuring it will not lead to
a zpci_release_device() call as at least the zPCI event handling code
still holds a reference.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In the pci_acpi_scan_root() function, when creating a PCI bus fails,
we need to free up the previously allocated memory, which can avoid
invalid memory usage and save resources.
Fixes: 789befdfa3 ("arm64: PCI: Migrate ACPI related functions to pci-acpi.c")
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250430060603.381504-1-qiaozhe@iscas.ac.cn
The subsystem-internal header pci.h still contains the function
prototype of pcim_intx(), which has since been made public in the global
header.
Remove the redundant function prototype.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250522084626.150148-2-phasta@kernel.org
Convert pci_msi_enable and pci_msi_enabled() to use bool type for clarity.
No functional changes, only code cleanup.
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250516165223.125083-2-18255117159@163.com
pci/iomap.c still contains warnings about those functions not behaving
in a managed manner if pcim_enable_device() was called. Since all hybrid
behavior that users could know about has been removed by now, those
explicit warnings are no longer necessary.
Remove the hybrid-devres usage warnings from the kernel-doc.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-8-phasta@kernel.org
