- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core logging
rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Add #defines for TLP Header/Prefix log sizes (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can read the
correct number of DWORDs from the TLP Prefix Log (Ilpo Järvinen)
- Read TLP Prefixes in addition to the Header Log in pcie_read_tlp_log()
(Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and Prefix
Log (Ilpo Järvinen)
* pci/err:
PCI: Add pcie_print_tlp_log() to print TLP Header and Prefix Log
PCI: Add TLP Prefix reading to pcie_read_tlp_log()
PCI: Store number of supported End-End TLP Prefixes
PCI: Use unsigned int i in pcie_read_tlp_log()
PCI: Use same names in pcie_read_tlp_log() prototype and definition
PCI: Add defines for TLP Header/Prefix log sizes
PCI: Move TLP Log handling to its own file
PCI: Don't expose pcie_read_tlp_log() outside PCI subsystem
Add pcie_print_tlp_log() to print TLP Header and Prefix Log. Print End-End
Prefixes only if they are non-zero.
Consolidate the few places which currently print TLP using custom
formatting.
Link: https://lore.kernel.org/r/20250114170840.1633-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
pcie_read_tlp_log() handles only 4 Header Log DWORDs but TLP Prefix Log
(PCIe r6.1 secs 7.8.4.12 & 7.9.14.13) may also be present.
Generalize pcie_read_tlp_log() and struct pcie_tlp_log to also handle TLP
Prefix Log. The relevant registers are formatted identically in AER and DPC
Capability, but has these variations:
a) The offsets of TLP Prefix Log registers vary.
b) DPC RP PIO TLP Prefix Log register can be < 4 DWORDs.
c) AER TLP Prefix Log Present (PCIe r6.1 sec 7.8.4.7) can indicate Prefix
Log is not present.
Therefore callers must pass the offset of the TLP Prefix Log register and
the entire length to pcie_read_tlp_log() to be able to read the correct
number of TLP Prefix DWORDs from the correct offset.
Link: https://lore.kernel.org/r/20250114170840.1633-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash ternary fix from
https://lore.kernel.org/r/20250116172019.88116-1-colin.i.king@gmail.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Loop variable i counting from 0 upwards does not need to be signed so make
it unsigned int.
Link: https://lore.kernel.org/r/20250114170840.1633-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
pcie_read_tlp_log()'s prototype and function signature diverged due to
changes made while applying.
Make the parameters of pcie_read_tlp_log() named identically.
Link: https://lore.kernel.org/r/20250114170840.1633-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
TLP Log is a PCIe feature and is processed only by AER and DPC.
Configwise, DPC depends AER being enabled. In lack of better place, the TLP
Log handling code was initially placed into pci.c but it can be easily
placed in a separate file.
Move TLP Log handling code to its own file under pcie/ subdirectory and
include it only when AER is enabled.
Link: https://lore.kernel.org/r/20250114170840.1633-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
The interrupt handler for bandwidth notifications, pcie_bwnotif_irq(),
dereferences a "data" pointer.
On unbind, that pointer is set to NULL by pcie_bwnotif_remove(). However
the interrupt handler may still be invoked afterwards and will dereference
that NULL pointer.
That's because the interrupt is requested using a devm_*() helper and the
driver core releases devm_*() resources *after* calling ->remove().
pcie_bwnotif_remove() does clear the Link Bandwidth Management Interrupt
Enable and Link Autonomous Bandwidth Interrupt Enable bits in the Link
Control Register, but that won't prevent execution of pcie_bwnotif_irq():
The interrupt for bandwidth notifications may be shared with AER, DPC,
PME, and hotplug. So pcie_bwnotif_irq() may be executed as long as the
interrupt is requested.
There's a similar race on bind: pcie_bwnotif_probe() requests the
interrupt when the "data" pointer still points to NULL. A NULL pointer
deref may thus likewise occur if AER, DPC, PME or hotplug raise an
interrupt in-between the bandwidth controller's call to devm_request_irq()
and assignment of the "data" pointer.
Drop the devm_*() usage and reorder requesting of the interrupt to fix the
issue.
While at it, drop a stray but harmless no_free_ptr() invocation when
assigning the "data" pointer in pcie_bwnotif_probe().
Ilpo points out that the locking on unbind and bind needs to be symmetric,
so move the call to pcie_bwnotif_disable() inside the critical section
protected by pcie_bwctrl_setspeed_rwsem and pcie_bwctrl_lbms_rwsem.
Evert reports a hang on shutdown of an ASUS ROG Strix SCAR 17 G733PYV.
The issue is no longer reproducible with the present commit.
Evert found that attaching a USB-C monitor prevented the hang. The
machine contains an ASMedia USB 3.2 controller below a hotplug-capable
Root Port. So one possible explanation is that the controller gets
hot-removed on shutdown unless something is connected. And the ensuing
hotplug interrupt occurs exactly when the bandwidth controller is
unregistering. The precise cause could not be determined because the
screen had already turned black when the hang occurred.
Link: https://lore.kernel.org/r/ae2b02c9cfbefff475b6e132b0aa962aaccbd7b2.1736162539.git.lukas@wunner.de
Fixes: 665745f274 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Evert Vorster <evorster@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219629
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Evert Vorster <evorster@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=zLos
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
If a PCIe port only supports a single speed, enabling bandwidth control
is pointless: There's no need to monitor autonomous speed changes, nor
can the speed be changed.
Not enabling it saves a small amount of memory and compute resources,
but also fixes a boot hang reported by Niklas: It occurs when enabling
bandwidth control on Downstream Ports of Intel JHL7540 "Titan Ridge 2018"
Thunderbolt controllers. The ports only support 2.5 GT/s in accordance
with USB4 v2 sec 11.2.1, so the present commit works around the issue.
PCIe r6.2 sec 8.2.1 prescribes that:
"A device must support 2.5 GT/s and is not permitted to skip support
for any data rates between 2.5 GT/s and the highest supported rate."
Consequently, bandwidth control is currently only disabled if a port
doesn't support higher speeds than 2.5 GT/s. However the Implementation
Note in PCIe r6.2 sec 7.5.3.18 cautions:
"It is strongly encouraged that software primarily utilize the
Supported Link Speeds Vector instead of the Max Link Speed field,
so that software can determine the exact set of supported speeds on
current and future hardware. This can avoid software being confused
if a future specification defines Links that do not require support
for all slower speeds."
In other words, future revisions of the PCIe Base Spec may allow gaps
in the Supported Link Speeds Vector. To be future-proof, don't just
check whether speeds above 2.5 GT/s are supported, but rather check
whether *more than one* speed is supported.
Fixes: 665745f274 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Closes: https://lore.kernel.org/r/db8e457fcd155436449b035e8791a8241b0df400.camel@kernel.org
Link: https://lore.kernel.org/r/3564908a9c99fc0d2a292473af7a94ebfc8f5820.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonthan.Cameron@huawei.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After 17423360a2 ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume"), pci_save_aspm_l1ss_state(dev) saves the L1SS state for
"dev", and pci_restore_aspm_l1ss_state(dev) restores the state for both
"dev" and its parent.
The problem is that unless pci_save_state() has been used in some other
path and has already saved the parent L1SS state, we will restore junk to
the parent, which means the L1 Substates likely won't work correctly.
Save the L1SS config for both the device and its parent in
pci_save_aspm_l1ss_state(). When restoring, we need both because L1SS must
be enabled at the parent (the Downstream Port) before being enabled at the
child (the Upstream Port).
Link: https://lore.kernel.org/r/20241115072200.37509-3-jhp@endlessos.org
Fixes: 17423360a2 ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218394
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
[bhelgaas: parallel save/restore structure, simplify commit log, patch at
https://lore.kernel.org/r/20241212230340.GA3267194@bhelgaas]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org> # Asus B1400CEAE
- Add read/modify/write locking for Link Control 2, which is used to manage
Link speed (Ilpo Järvinen)
- Cache all supported Link speeds for use by the PCIe bandwidth controller
(Ilpo Järvinen)
- Extract the Link Bandwidth Management Status check into pcie_lbms_seen(),
where it can be shared between the bandwidth controller and quirks that
use it to help retrain failed links (Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address the
reasons it was previously reverted (Alexandru Gagniuc, Ilpo Järvinen)
- Add pcie_set_target_speed() and related functionality to manage PCIe Link
speed based on thermal constraints (Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the existing
thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
- Drop duplicate pcie_get_speed_cap(), pcie_get_width_cap() declarations
(Bjorn Helgaas)
* pci/bwctrl:
PCI: Drop duplicate pcie_get_speed_cap(), pcie_get_width_cap() declarations
selftests/pcie_bwctrl: Create selftests
thermal: Add PCIe cooling driver
PCI/bwctrl: Add pcie_set_target_speed() to set PCIe Link Speed
PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller
PCI: Abstract LBMS seen check into pcie_lbms_seen()
PCI: Refactor pcie_update_link_speed()
PCI: Store all PCIe Supported Link Speeds
PCI: Protect Link Control 2 Register with RMW locking
Documentation PCI: Reformat RMW ops documentation
Add a thermal cooling driver to provide path to access PCIe bandwidth
controller using the usual thermal interfaces.
A cooling device is instantiated for controllable PCIe Ports from the
bwctrl service driver.
If registering the cooling device fails, allow bwctrl's probe to succeed
regardless. As cdev in that case contains IS_ERR() pseudo "pointer", clean
that up inside the probe function so the remove side doesn't need to
suddenly make an odd looking IS_ERR() check.
The thermal side state 0 means no throttling, i.e., maximum supported PCIe
Link Speed.
Link: https://lore.kernel.org/r/20241018144755.7875-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: dropped data->cdev test per
https://lore.kernel.org/r/ZzRm1SJTwEMRsAr8@wunner.de]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # From the cooling device interface perspective
Currently, PCIe Link Speeds are adjusted by custom code rather than in a
common function provided in PCI core. The PCIe bandwidth controller
(bwctrl) introduces an in-kernel API, pcie_set_target_speed(), to set PCIe
Link Speed.
Convert Target Speed quirk to use the new API. The Target Speed quirk runs
very early when bwctrl is not yet probed for a Port and can also run later
when bwctrl is already setup for the Port, which requires the per port
mutex (set_speed_mutex) to be only taken if the bwctrl setup is already
complete.
The new API is also intended to be used in an upcoming commit that adds a
thermal cooling device to throttle PCIe bandwidth when thermal thresholds
are reached.
The PCIe bandwidth control procedure is as follows. The highest speed
supported by the Port and the PCIe device which is not higher than the
requested speed is selected and written into the Target Link Speed in the
Link Control 2 Register. Then bandwidth controller retrains the PCIe Link.
Bandwidth Notifications enable the cur_bus_speed in the struct pci_bus to
keep track PCIe Link Speed changes. While Bandwidth Notifications should
also be generated when bandwidth controller alters the PCIe Link Speed, a
few platforms do not deliver LMBS interrupt after Link Training as
expected. Thus, after changing the Link Speed, bandwidth controller makes
additional read for the Link Status Register to ensure cur_bus_speed is
consistent with the new PCIe Link Speed.
Link: https://lore.kernel.org/r/20241018144755.7875-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash devm_mutex_init() error checking from
https://lore.kernel.org/r/20241030163139.2111689-1-andriy.shevchenko@linux.intel.com,
drop export of pcie_set_target_speed()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This mostly reverts the commit b4c7d2076b ("PCI/LINK: Remove bandwidth
notification"). An upcoming commit extends this driver building PCIe
bandwidth controller on top of it.
PCIe bandwidth notifications were first added in the commit e8303bb7a7
("PCI/LINK: Report degraded links via link bandwidth notification") but
later had to be removed. The significant changes compared with the old
bandwidth notification driver include:
1) Don't print the notifications into kernel log, just keep the Link
Speed cached in struct pci_bus updated. While somewhat unfortunate,
the log spam was the source of complaints that eventually lead to
the removal of the bandwidth notifications driver (see the links
below for further information).
2) Besides the Link Bandwidth Management Interrupt, also enable Link
Autonomous Bandwidth Interrupt to cover the other source of bandwidth
changes.
3) Handle Link Speed updates robustly. Refresh the cached Link Speed
when enabling Bandwidth Notification Interrupts, and solve the race
between Link Speed read and LBMS/LABS update in
pcie_bwnotif_irq_thread().
4) Use concurrency safe LNKCTL RMW operations.
5) The driver is now called PCIe bwctrl (bandwidth controller) instead
of just bandwidth notifications because of increased scope and
functionality within the driver.
6) Coexist with the Target Link Speed quirk in pcie_failed_link_retrain().
Provide LBMS counting API for it.
7) Tweaks to variable/functions names for consistency and length reasons.
Bandwidth Notifications enable the cur_bus_speed in the struct pci_bus to
keep track PCIe Link Speed changes.
[bhelgaas: This is based on previous work by Alexandru Gagniuc
<mr.nuke.me@gmail.com>; see e8303bb7a7 ("PCI/LINK: Report degraded links
via link bandwidth notification")]
Link: https://lore.kernel.org/r/20241018144755.7875-7-ilpo.jarvinen@linux.intel.com
Link: https://lore.kernel.org/all/20190429185611.121751-1-helgaas@kernel.org/
Link: https://lore.kernel.org/linux-pci/20190501142942.26972-1-keith.busch@intel.com/
Link: https://lore.kernel.org/linux-pci/20200115221008.GA191037@google.com/
Suggested-by: Lukas Wunner <lukas@wunner.de> # Building bwctrl on top of bwnotif
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash fix to drop IRQF_ONESHOT and convert to hardirq handler:
https://lore.kernel.org/r/20241115165717.15233-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
PCIe r6.2, sec 5.5.4, requires that:
If setting either or both of the enable bits for ASPM L1 PM Substates,
both ports must be configured as described in this section while ASPM L1
is disabled.
Previously, pcie_config_aspm_l1ss() assumed that "setting enable bits"
meant "setting them to 1", and it configured L1SS as follows:
- Clear L1SS enable bits
- Disable L1
- Configure L1SS enable bits as required
- Enable L1 if required
With this sequence, when disabling L1SS on an ARM A-core with a Synopsys
DesignWare PCIe core, the CPU occasionally hangs when reading
PCI_L1SS_CTL1, leading to a reboot when the CPU watchdog expires.
Move the L1 disable to the caller (pcie_config_aspm_link(), where L1 was
already enabled) so L1 is always disabled while updating the L1SS bits:
- Disable L1
- Clear L1SS enable bits
- Configure L1SS enable bits as required
- Enable L1 if required
Change pcie_aspm_cap_init() similarly.
Link: https://lore.kernel.org/r/20241007032917.872262-1-ajayagarwal@google.com
Signed-off-by: Ajay Agarwal <ajayagarwal@google.com>
[bhelgaas: comments, commit log, compute L1SS setting before config access]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
- Remove unused struct 'acpi_handle_node' (Dr. David Alan Gilbert)
- Use array notation for portdrv .id_table consistently (Masahiro Yamada)
- Switch to new Intel CPU model defines (Tony Luck)
- Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)
* pci/misc:
PCI: controller: Add missing MODULE_DESCRIPTION() macros
PCI: Add missing MODULE_DESCRIPTION() macros
PCI/PM: Switch to new Intel CPU model defines
PCI: Use array for .id_table consistently
ACPI: PCI: Remove unused struct 'acpi_handle_node'
While 'x' and '&x[0]' are equivalent, most of the PCI drivers use the
former form for the .id_table.
Update some drivers and documentation for consistency.
Link: https://lore.kernel.org/r/20240517120458.1260489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-----BEGIN PGP SIGNATURE-----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=xjoS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
- Clear bridge Secondary Status errors after enumeration since enumeration
causes many errors (Vidya Sagar)
- Wait for Link Training==0 before starting Link retrain to avoid a race;
this was done previously but broken by a faulty merge (Ilpo Järvinen)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific about what
"LEGACY" means (Damien Le Moal)
- Update return types of pci_find_capability() stubs to match the extern
declarations for the actual implementations (Bjorn Helgaas)
- Drop unnecessary pci_enable_device_io() from pata_cs5520 (Heiner
Kallweit)
- Drop unused pci_enable_device_io() (Heiner Kallweit)
- On 2016 and newer BIOSes, skip early E820 check for ECAM regions
described in ACPI MCFG; there's no spec requirement for E820
reservations, and some machines don't provide them (Bjorn Helgaas)
- If devices were disconnected while suspended, don't wait for them when
resuming (Ilpo Järvinen)
* pci/enumeration:
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw88: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: ath10k: Refer to INTX instead of LEGACY
net: wangxun: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY use
RDMA/vmw_pvrdma: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
IB/qib: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
drm/amdgpu: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
mfd: intel-lpss: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
platform/x86: intel_ips: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
usb: hcd-pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ASoC: Intel: avs: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
Documentation: PCI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/portdrv: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/MSI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI: Clarify intent of LT wait
PCI: Wait for Link Training==0 before starting Link retrain
PCI: Clear Secondary Status errors after enumeration
- Specify Revision 6 of the "Enable DPC" _DSM function to match the
implementation (Kuppuswamy Sathyanarayanan)
- Check for failure of the "Locate Port" _DSM function (Kuppuswamy
Sathyanarayanan)
* pci/edr:
PCI/EDR: Align EDR_PORT_LOCATE_DSM with PCI Firmware r3.3
PCI/EDR: Align EDR_PORT_DPC_ENABLE_DSM with PCI Firmware r3.3
The "Downstream Port Containment related Enhancements" ECN of Jan 28, 2019
(document 12888 below), defined the EDR_PORT_LOCATE_DSM function with
Revision ID 5 with a return value encoding (Bits 2:0 = Function, Bits 7:3 =
Device, Bits 15:8 = Bus). When the ECN was integrated into PCI Firmware
r3.3, sec 4.6.13, Bit 31 was added to indicate success or failure.
Check Bit 31 for failure in acpi_dpc_port_get().
Link: https://lore.kernel.org/r/20240501022543.1626025-1-sathyanarayanan.kuppuswamy@linux.intel.com
Link: https://members.pcisig.com/wg/PCI-SIG/document/12888
Fixes: ac1c8e35a3 ("PCI/DPC: Add Error Disconnect Recover (EDR) support")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[bhelgaas: split into two patches, update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Satish Thatchanamurthy <Satish.Thatchanamurt@Dell.com> # one platform
The "Downstream Port Containment related Enhancements" ECN of Jan 28, 2019
(document 12888 below), defined the EDR_PORT_DPC_ENABLE_DSM function with
Revision ID 5 with Arg3 being an integer. But when the ECN was integrated
into PCI Firmware r3.3, sec 4.6.12, it was defined as Revision ID 6 with
Arg3 being a package containing an integer.
The implementation in acpi_enable_dpc() supplies a package as Arg3 (arg4 in
the code), but it previously specified Revision ID 5. Align this with PCI
Firmware r3.3 by using Revision ID 6.
If firmware implemented per the ECN, its Revision 5 function would receive
a package as Arg3 when it expects an integer, so acpi_enable_dpc() would
likely fail. If such firmware exists and lacks a Revision 6 function that
expects a package, we may have to add support for Revision 5.
Link: https://lore.kernel.org/r/20240501022543.1626025-1-sathyanarayanan.kuppuswamy@linux.intel.com
Link: https://members.pcisig.com/wg/PCI-SIG/document/12888
Fixes: ac1c8e35a3 ("PCI/DPC: Add Error Disconnect Recover (EDR) support")
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[bhelgaas: split into two patches, update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Satish Thatchanamurthy <Satish.Thatchanamurt@Dell.com> # one platform
There's a typo that makes parent device uses child LNKCTL value and vice
versa. This causes Micron NVMe to trigger a reboot upon system resume.
Correct the typo to fix the issue.
Fixes: 64dbb2d707 ("PCI/ASPM: Disable L1 before configuring L1 Substates")
Link: https://lore.kernel.org/r/20240506051602.1990743-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: update subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With only one set of defines remaining, state can be almost used as-is to
set ->aspm_disable/default. Only CLKPM and L1 PM substates need special
handling.
Remove unnecessary if conditions that can use the state variable bits
directly. Move ASPM mask calculation into pci_calc_aspm_enable_mask() and
pci_calc_aspm_disable_mask() helpers which makes it easier to alter state
variable directly.
Link: https://lore.kernel.org/r/20240322123952.6384-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The linux/pci.h and aspm.c files define their own sets of link state
related defines which are almost the same.
Consolidate the use of defines into those defined by linux/pci.h and expand
PCIE_LINK_STATE_L0S to match earlier ASPM_STATE_L0S that includes both
upstream and downstream bits. Rename also the defines that are internal to
aspm.c to start with PCIE_LINK_STATE for consistency.
While the PCIE_LINK_STATE_L0S BIT(0) -> (BIT(0) | BIT(1)) transformation is
not 1:1, in practice aspm.c already used ASPM_STATE_L0S that has both bits
enabled except during mapping.
While at it, place the PCIE_LINK_STATE_CLKPM define last to have more
logical grouping.
Use static_assert() to ensure PCIE_LINK_STATE_L0S is strictly equal to the
combination of PCIE_LINK_STATE_L0S_UP/DW.
Link: https://lore.kernel.org/r/20240322123952.6384-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
A few if conditions align misleadingly with the following code block. The
checks are really cascading NULL checks that fit into 80 chars so remove
newlines in between and realign to the if condition indent.
Link: https://lore.kernel.org/r/20240429094707.2529-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In the PCI Express Port Bus Driver, use the macro PCI_IRQ_INTX instead of
the now deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-3-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The aer-inject tool is no longer maintained in the original repository
and is missing a fix related to the musl library. So, with the author's
(Huang Ying) consent, it has been moved to a new repository [1].
Update all references to the repository link.
Link: https://github.com/intel/aer-inject.git [1]
Link: https://lore.kernel.org/r/20240416055035.200085-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Huang Ying <ying.huang@intel.com>
-----BEGIN PGP SIGNATURE-----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=AP3I
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
- After a DPC event, print all logged TLP Prefixes instead of printing the
first prefix several times (Ilpo Järvinen)
- Ignore the expected Surprise Down error that may cause a DPC event when
hot-removing a device (Smita Koralahalli)
- Add an RP PIO log size quirk for Intel Raptor Lake Root Ports, which
still don't advertise the correct log size, which prevented logging of RP
PIO Log registers when DPC is triggered (Paul Menzel)
* pci/dpc:
PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports
PCI/DPC: Ignore Surprise Down error on hot removal
PCI/DPC: Print all TLP Prefixes, not just the first
- Collect ASPM-related code into aspm.c (David E. Box)
- Save and restore ASPM L1 PM Substates configuration so these states
continue working after suspend/resume (David E. Box)
- Move the ASPM L1.2-related LTR save/restore next to the ASPM save/restore
(David E. Box)
- Move the required L1 disable before L1 Substate configuration into
pci_restore_aspm_l1ss_state() (Bjorn Helgaas)
- Update save_save when ASPM config is changed, so a .slot_reset() during
error recovery restores the changed config, not the .probe()-time config
(Vidya Sagar)
* pci/aspm:
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
PCI/ASPM: Move pci_configure_ltr() to aspm.c
Many PCIe device drivers save the configuration state of their device
during probe and restore it when their .slot_reset() hook is called during
PCIe error recovery.
If the ASPM configuration is changed after the driver's probe is called and
before an error event occurs, .slot_reset() restores the ASPM configuration
to what it was at the time of probe, not to what it was just before the
occurrence of the error event. This leads to a mismatch in ASPM
configuration between the device and its upstream device.
Update the saved configuration of the device when the ASPM configuration
changes.
Link: https://lore.kernel.org/r/20240222174436.3565146-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[bhelgaas: commit log, rebase to pci/aspm, rename to
pci_update_aspm_saved_state() since it updates only LNKCTL, update only
ASPMC and CLKREQ_EN in LNKCTL]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Per PCIe r6.1, sec 5.5.4, L1 must be disabled while setting ASPM L1 PM
Substates enable bits. Previously this was enforced by clearing
PCI_EXP_LNKCTL_ASPMC before calling pci_restore_aspm_l1ss_state().
Move the L1 (and L0s, although that doesn't seem required) disable into
pci_restore_aspm_l1ss_state() itself so it's closer to the code that
depends on it.
Link: https://lore.kernel.org/r/20240223213733.GA115410@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
4ff116d0d5 ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume") restored the L1 PM Substates Capability after resume,
which reduced power consumption by making the ASPM L1.x states work after
resume.
a7152be79b ("Revert "PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume"") reverted 4ff116d0d5 because resume failed on some
systems, so power consumption after resume increased again.
a7152be79b mentioned that we restore L1 PM substate configuration even
though ASPM L1 may already be enabled. This is due the fact that the
pci_restore_aspm_l1ss_state() was called before pci_restore_pcie_state().
Save and restore the L1 PM Substates Capability, following PCIe r6.1, sec
5.5.4 more closely by:
1) Do not restore ASPM configuration in pci_restore_pcie_state() but
do that after PCIe capability is restored in pci_restore_aspm_state()
following PCIe r6.1, sec 5.5.4.
2) If BIOS reenables L1SS, particularly L1.2, we need to clear the
enables in the right order, downstream before upstream. Defer
restoring the L1SS config until we are at the downstream component.
Then update the config for both ends of the link in the prescribed
order.
3) Program ASPM L1 PM substate configuration before L1 enables.
4) Program ASPM L1 PM substate enables last, after rest of the fields
in the capability are programmed.
[bhelgaas: commit log, squash L1SS-related patches, do both LNKCTL restores
in pci_restore_pcie_state()]
Link: https://lore.kernel.org/r/20240128233212.1139663-3-david.e.box@linux.intel.com
Link: https://lore.kernel.org/r/20240128233212.1139663-4-david.e.box@linux.intel.com
Link: https://lore.kernel.org/r/20240223205851.114931-5-helgaas@kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217321
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Co-developed-by: David E. Box <david.e.box@linux.intel.com>
Reported-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tasev Nikola <tasev.stefanoska@skynet.be> # Asus UX305FA
Cc: Mark Enriquez <enriquezmark36@gmail.com>
Cc: Thomas Witt <kernel@witt.link>
Cc: Werner Sembach <wse@tuxedocomputers.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Both AER and DPC RP PIO provide TLP Header Log registers (PCIe r6.1 secs
7.8.4 & 7.9.14) to convey error diagnostics but the struct is named after
AER as the struct aer_header_log_regs. Also, not all places that handle TLP
Header Log use the struct and the struct members are named individually.
Generalize the struct name and members, and use it consistently where TLP
Header Log is being handled so that a pcie_read_tlp_log() helper can be
easily added.
Link: https://lore.kernel.org/r/20240206135717.8565-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: drop ixgbe changes for now, tidy whitespace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use u32 for PCIe AER Capability register variable and name it "aercc"
(Advanced Error Capabilities and Control register, PCIe r6.1 sec 7.8.4.7)
instead of "temp".
Link: https://lore.kernel.org/r/20240206135717.8565-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: make subject more specific and match similar previous patches]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PM runtime can be done simultaneously with AER error handling. Avoid that
by using pm_runtime_get_sync() before and pm_runtime_put() after reset in
pcie_do_recovery() for all recovering devices.
pm_runtime_get_sync() will increase dev->power.usage_count counter to
prevent any possible future request to runtime suspend a device. It will
also resume a device, if it was previously in D3hot state.
I tested with igc device by doing simultaneous aer_inject and rpm
suspend/resume via /sys/bus/pci/devices/PCI_ID/power/control and can
reproduce:
igc 0000:02:00.0: not ready 65535ms after bus reset; giving up
pcieport 0000:00:1c.2: AER: Root Port link has been reset (-25)
pcieport 0000:00:1c.2: AER: subordinate device reset failed
pcieport 0000:00:1c.2: AER: device recovery failed
igc 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
The problem disappears when this patch is applied.
Link: https://lore.kernel.org/r/20240212120135.146068-1-stanislaw.gruszka@linux.intel.com
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: <stable@vger.kernel.org>
Even when CONFIG_PCIEASPM is not set, we save and restore the LTR
Capability so that if ASPM L1.2 and LTR were configured by the platform,
ASPM L1.2 will still work after suspend/resume, when that platform
configuration may be lost. See dbbfadf231 ("PCI/ASPM: Save LTR Capability
for suspend/resume").
Since ASPM L1.2 depends on the LTR Capability, move the save/restore code
to the part of aspm.c that is always compiled regardless of
CONFIG_PCIEASPM. No functional change intended.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240128233212.1139663-5-david.e.box@linux.intel.com
[bhelgaas: commit log, reorder to make this a pure move]
Link: https://lore.kernel.org/r/20240223205851.114931-4-helgaas@kernel.org
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Latency Tolerance Reporting (LTR) mechanism supports the ASPM L1.2
state and is only configured when CONFIG_PCIEASPM is set.
Move pci_configure_ltr() and pci_bridge_reconfigure_ltr() into aspm.c since
they only build when CONFIG_PCIEASPM is set. No functional change
intended.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240128233212.1139663-2-david.e.box@linux.intel.com
[bhelgaas: commit log, split build change from function moves]
Link: https://lore.kernel.org/r/20240223205851.114931-2-helgaas@kernel.org
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
According to PCIe r6.0 sec 6.7.6 [1], async removal with DPC may result in
surprise down error. This error is expected and is just a side-effect of
async remove.
Ignore surprise down error generated as a side-effect of async remove.
Typically, this error is benign as the pciehp handler invoked by PDC
or/and DLLSC alongside DPC, de-enumerates and brings down the device
appropriately, but the error messages might confuse users. Get rid of
these irritating log messages with a 1s delay while pciehp waits for
DPC recovery.
The implementation is as follows: On an async remove a DPC is triggered
along with a Presence Detect State change and/or DLL State Change.
Determine it's an async remove by checking for DPC Trigger Status in DPC
Status Register and Surprise Down Error Status in AER Uncorrected Error
Status to be non-zero. If true, treat the DPC event as a side-effect of
async remove, clear the error status registers and continue with hot-plug
tear down routines. If not, follow the existing routine to handle AER and
DPC errors.
Masking Surprise Down Errors was explored as an alternative approach, but
discarded due to the odd behavior that masking only avoids the interrupt,
but still records an error per PCIe r6.0, sec 6.2.3.2.2. That stale error
would be reported the next time some error other than Surprise Down is
handled.
Dmesg before:
pcieport 0000:00:01.4: DPC: containment event, status:0x1f01 source:0x0000
pcieport 0000:00:01.4: DPC: unmasked uncorrectable error detected
pcieport 0000:00:01.4: PCIe Bus Error: severity=Uncorrected (Fatal), type=Transaction Layer, (Receiver ID)
pcieport 0000:00:01.4: device [1022:14ab] error status/mask=00000020/04004000
pcieport 0000:00:01.4: [ 5] SDES (First)
nvme nvme2: frozen state error detected, reset controller
pcieport 0000:00:01.4: DPC: Data Link Layer Link Active not set in 1000 msec
pcieport 0000:00:01.4: AER: subordinate device reset failed
pcieport 0000:00:01.4: AER: device recovery failed
pcieport 0000:00:01.4: pciehp: Slot(16): Link Down
nvme2n1: detected capacity change from 1953525168 to 0
pci 0000:04:00.0: Removing from iommu group 49
Dmesg after:
pcieport 0000:00:01.4: pciehp: Slot(16): Link Down
nvme1n1: detected capacity change from 1953525168 to 0
pci 0000:04:00.0: Removing from iommu group 37
[1] PCI Express Base Specification Revision 6.0, Dec 16 2021.
https://members.pcisig.com/wg/PCI-SIG/document/16609
Link: https://lore.kernel.org/r/20240207181854.121335-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Now that the driver core can properly handle constant struct bus_type, move
the pcie_port_bus_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Link: https://lore.kernel.org/r/20240208-bus_cleanup-pci2-v1-1-5e578210b6f2@marliere.net
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org> # 6.7
The TLP Prefix Log Register consists of multiple DWORDs (PCIe r6.1 sec
7.9.14.13) but the loop in dpc_process_rp_pio_error() keeps reading from
the first DWORD, so we print only the first PIO TLP Prefix (duplicated
several times), and we never print the second, third, etc., Prefixes.
Add the iteration count based offset calculation into the config read.
Fixes: f20c4ea49e ("PCI/DPC: Add eDPC support")
Link: https://lore.kernel.org/r/20240118110815.3867-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: add user-visible details to commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-----BEGIN PGP SIGNATURE-----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=ri0M
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
* for-next/cpufeature
- Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye olde
Thunder-X machines.
- Avoid mapping KPTI trampoline when it is not required.
- Make CPU capability API more robust during early initialisation.
* for-next/early-idreg-overrides
- Remove dependencies on core kernel helpers from the early
command-line parsing logic in preparation for moving this code
before the kernel is mapped.
* for-next/fpsimd
- Restore kernel-mode fpsimd context lazily, allowing us to run fpsimd
code sequences in the kernel with pre-emption enabled.
* for-next/kbuild
- Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y.
- Makefile cleanups.
* for-next/lpa2-prep
- Preparatory work for enabling the 'LPA2' extension, which will
introduce 52-bit virtual and physical addressing even with 4KiB
pages (including for KVM guests).
* for-next/misc
- Remove dead code and fix a typo.
* for-next/mm
- Pass NUMA node information for IRQ stack allocations.
* for-next/perf
- Add perf support for the Synopsys DesignWare PCIe PMU.
- Add support for event counting thresholds (FEAT_PMUv3_TH) introduced
in Armv8.8.
- Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.
- Minor PMU driver fixes and optimisations.
* for-next/rip-vpipt
- Remove what support we had for the obsolete VPIPT I-cache policy.
* for-next/selftests
- Improvements to the SVE and SME selftests.
* for-next/stacktrace
- Refactor kernel unwind logic so that it can used by BPF unwinding
and, eventually, reliable backtracing.
* for-next/sysregs
- Update a bunch of register definitions based on the latest XML drop
from Arm.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmWWvKYQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNIiTB/9agZBkEhZjP2sNDGyE4UFwawweWHkt2r8h
WyvdwP91Z/AIsYSsGYu36J0l4pOnMKp/i6t+rt031SK4j+Q8hJYhSfDt3RvVbc0/
Pz9D18V6cLrfq+Yxycqq9ufVdjs+m+CQ5WeLaRGmNIyEzJ/Jv/qrAN+2r603EeLP
nq08qMZhDIQd2ZzbigCnGaNrTsVSafFfBFv1GsgDvnMZAjs1G6457A6zu+NatNUc
+TMSG+3EawutHZZ2noXl0Ra7VOfIbVZFiUssxRPenKQByHHHR+QB2c/O1blri+dm
XLMutvqO2/WvYGIfXO5koqZqvpVeR3zXxPwmGi5hQBsmOjtXzKd+
=U4mo
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"CPU features:
- Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye
olde Thunder-X machines
- Avoid mapping KPTI trampoline when it is not required
- Make CPU capability API more robust during early initialisation
Early idreg overrides:
- Remove dependencies on core kernel helpers from the early
command-line parsing logic in preparation for moving this code
before the kernel is mapped
FPsimd:
- Restore kernel-mode fpsimd context lazily, allowing us to run
fpsimd code sequences in the kernel with pre-emption enabled
KBuild:
- Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y
- Makefile cleanups
LPA2 prep:
- Preparatory work for enabling the 'LPA2' extension, which will
introduce 52-bit virtual and physical addressing even with 4KiB
pages (including for KVM guests).
Misc:
- Remove dead code and fix a typo
MM:
- Pass NUMA node information for IRQ stack allocations
Perf:
- Add perf support for the Synopsys DesignWare PCIe PMU
- Add support for event counting thresholds (FEAT_PMUv3_TH)
introduced in Armv8.8
- Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.
- Minor PMU driver fixes and optimisations
RIP VPIPT:
- Remove what support we had for the obsolete VPIPT I-cache policy
Selftests:
- Improvements to the SVE and SME selftests
Stacktrace:
- Refactor kernel unwind logic so that it can used by BPF unwinding
and, eventually, reliable backtracing
Sysregs:
- Update a bunch of register definitions based on the latest XML drop
from Arm"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
kselftest/arm64: Don't probe the current VL for unsupported vector types
efi/libstub: zboot: do not use $(shell ...) in cmd_copy_and_pad
arm64: properly install vmlinuz.efi
arm64/sysreg: Add missing system instruction definitions for FGT
arm64/sysreg: Add missing system register definitions for FGT
arm64/sysreg: Add missing ExtTrcBuff field definition to ID_AA64DFR0_EL1
arm64/sysreg: Add missing Pauth_LR field definitions to ID_AA64ISAR1_EL1
arm64: memory: remove duplicated include
arm: perf: Fix ARCH=arm build with GCC
arm64: Align boot cpucap handling with system cpucap handling
arm64: Cleanup system cpucap handling
MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
drivers/perf: add DesignWare PCIe PMU driver
PCI: Move pci_clear_and_set_dword() helper to PCI header
PCI: Add Alibaba Vendor ID to linux/pci_ids.h
docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
arm64: irq: set the correct node for shadow call stack
Revert "perf/arm_dmc620: Remove duplicate format attribute #defines"
arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD
arm64: fpsimd: Preserve/restore kernel mode NEON at context switch
...
This reverts commit 08d0cc5f34.
Michael reported that when attempting to resume from suspend to RAM on ASUS
mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1), 08d0cc5f34
("PCI/ASPM: Remove pcie_aspm_pm_state_change()") caused a 12-second delay
with no output, followed by a reboot.
Workarounds include:
- Reverting 08d0cc5f34 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
- Booting with "pcie_aspm=off"
- Booting with "pcie_aspm.policy=performance"
- "echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm"
before suspending
- Connecting a USB flash drive
Link: https://lore.kernel.org/r/20240102232550.1751655-1-helgaas@kernel.org
Fixes: 08d0cc5f34 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
Reported-by: Michael Schaller <michael@5challer.de>
Link: https://lore.kernel.org/r/76c61361-b8b4-435f-a9f1-32b716763d62@5challer.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
aer_irq() reads the AER Root Error Status and Error Source Identification
(PCI_ERR_ROOT_STATUS and PCI_ERR_ROOT_ERR_SRC) registers directly into
struct aer_err_source. Both registers are 32 bits, so declare the members
explicitly as "u32" instead of "unsigned int".
Similarly, aer_get_device_error_info() reads the AER Header Log
(PCI_ERR_HEADER_LOG) registers, which are also 32 bits, into struct
aer_header_log_regs. Declare those members as "u32" as well.
No functional changes intended.
Link: https://lore.kernel.org/r/20231206224231.732765-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When a device with AER detects an error, it logs error information in its
own AER Error Status registers. It may send an Error Message to the Root
Port (RCEC in the case of an RCiEP), which logs the fact that an Error
Message was received (Root Error Status) and the Requester ID of the
message source (Error Source Identification).
aer_print_port_info() prints the Requester ID from the Root Port Error
Source in the usual Linux "bb:dd.f" format, but when find_source_device()
finds no error details in the hierarchy below the Root Port, it printed the
raw Requester ID without decoding it.
Decode the Requester ID in the usual Linux format so it matches other
messages.
Sample message changes:
- pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5
- pcieport 0000:00:1c.5: AER: can't find device of ID00e5
+ pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
+ pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5
Link: https://lore.kernel.org/r/20231206224231.732765-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
The PCIe spec classifies errors as either "Correctable" or "Uncorrectable".
Previously we printed these as "Corrected" or "Uncorrected". To avoid
confusion, use the same terms as the spec.
One confusing situation is when one agent detects an error, but another
agent is responsible for recovery, e.g., by re-attempting the operation.
The first agent may log a "correctable" error but it has not yet been
corrected. The recovery agent must report an uncorrectable error if it is
unable to recover. If we print the first agent's error as "Corrected", it
gives the false impression that it has already been resolved.
Sample message change:
- pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
+ pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5
Link: https://lore.kernel.org/r/20231206224231.732765-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
The clear and set pattern is commonly used for accessing PCI config,
move the helper pci_clear_and_set_dword() from aspm.c into PCI header.
In addition, rename to pci_clear_and_set_config_dword() to retain the
"config" information and match the other accessors.
No functional change intended.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-4-xueshuai@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a lockdep assert to pci_disable_link_state_locked() which should only
be called with a pci_bus_sem read lock held.
Link: https://lore.kernel.org/r/20231128081512.19387-7-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include function name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Replace the current 'sem' parameter to the __pci_disable_link_state()
helper with a more descriptive 'locked' parameter, which indicates whether
a pci_bus_sem read lock is already held.
Link: https://lore.kernel.org/r/20231128081512.19387-6-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include function name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add pci_enable_link_state_locked() for enabling link states that can be
used in contexts where a pci_bus_sem read lock is already held (e.g. from
pci_walk_bus()).
This helper will be used to fix a couple of potential deadlocks where
the current helper is called with the lock already held, hence the CC
stable tag.
Fixes: f492edb40b ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Link: https://lore.kernel.org/r/20231128081512.19387-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include helper name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.3
Cc: Michael Bottini <michael.a.bottini@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
- Add support for RCH (Restricted CXL Host) Error recovery
- Fix several region assembly bugs
- Fix mem-device lifetime issues relative to the sanitize command and
RCH topology.
- Refactor ACPI table parsing for CDAT parsing re-use in preparation for
CXL QOS support.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZUaowQAKCRDfioYZHlFs
Z75rAP44azzLPwJtva7Ur60KpNsGuoZKhvWWdeI1/zo9k4pHbwEA/Vaf/GGo0U5k
bMkoTmwPTd7YY79B5HNUQSZsqF9wlAc=
=TEQ0
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"The main new functionality this time is work to allow Linux to
natively handle CXL link protocol errors signalled via PCIe AER for
current generation CXL platforms. This required some enlightenment of
the PCIe AER core to workaround the fact that current generation RCH
(Restricted CXL Host) platforms physically hide topology details and
registers via a mechanism called RCRB (Root Complex Register Block).
The next major highlight is reworks to address bugs in parsing region
configurations for next generation VH (Virtual Host) topologies. The
old broken algorithm is replaced with a simpler one that significantly
increases the number of region configurations supported by Linux. This
is again relevant for error handling so that forward and reverse
address translation of memory errors can be carried out by Linux for
memory regions instantiated by platform firmware.
As for other cross-tree work, the ACPI table parsing code has been
refactored for reuse parsing the "CDAT" structure which is an
ACPI-like data structure that is reported by CXL devices. That work is
in preparation for v6.8 support for CXL QoS. Think of this as dynamic
generation of NUMA node topology information generated by Linux rather
than platform firmware.
Lastly, a number of internal object lifetime issues have been resolved
along with misc. fixes and feature updates (decoders_committed sysfs
ABI).
Summary:
- Add support for RCH (Restricted CXL Host) Error recovery
- Fix several region assembly bugs
- Fix mem-device lifetime issues relative to the sanitize command and
RCH topology.
- Refactor ACPI table parsing for CDAT parsing re-use in preparation
for CXL QOS support"
* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
lib/fw_table: Remove acpi_parse_entries_array() export
cxl/pci: Change CXL AER support check to use native AER
cxl/hdm: Remove broken error path
cxl/hdm: Fix && vs || bug
acpi: Move common tables helper functions to common lib
cxl: Add support for reading CXL switch CDAT table
cxl: Add checksum verification to CDAT from CXL
cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
cxl: Add decoders_committed sysfs attribute to cxl_port
cxl: Add cxl_decoders_committed() helper
cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
cxl/pci: Disable root port interrupts in RCH mode
cxl/pci: Add RCH downstream port error logging
cxl/pci: Map RCH downstream AER registers for logging protocol errors
cxl/pci: Update CXL error logging to use RAS register address
PCI/AER: Refactor cper_print_aer() for use by CXL driver module
cxl/pci: Add RCH downstream port AER register discovery
...
-----BEGIN PGP SIGNATURE-----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=G//C
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo
Järvinen, Bjorn Helgaas)
- Rework DPC control programming for clarity (Ilpo Järvinen)
* pci/field-get:
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk
PCI: Use FIELD_GET()
PCI/MSI: Use FIELD_GET/PREP()
PCI/DPC: Use defines with DPC reason fields
PCI/DPC: Use defined fields with DPC_CTL register
PCI/DPC: Use FIELD_GET()
PCI: hotplug: Use FIELD_GET/PREP()
PCI: dwc: Use FIELD_GET/PREP()
PCI: cadence: Use FIELD_GET()
PCI: Use FIELD_GET() to extract Link Width
PCI: mvebu: Use FIELD_PREP() with Link Width
PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields
# Conflicts:
# drivers/pci/controller/dwc/pcie-tegra194.c
* pci/aspm:
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1"
PCI/ASPM: Convert printk() to pr_*() and add include
PCI/ASPM: Remove unnecessary includes
PCI/ASPM: Use FIELD_MAX() instead of literals
PCI/ASPM: Use time constants
PCI/ASPM: Return U32_MAX instead of bit magic construct
PCI/ASPM: Use FIELD_GET/PREP() to access PCIe capability fields
PCI: Add PCI_L1SS_CTL2 fields
AER corrected and uncorrectable internal errors (CIE/UIE) are masked
in their corresponding mask registers per default once in power-up
state. [1][2] Enable internal errors for RCECs to receive CXL
downstream port errors of Restricted CXL Hosts (RCHs).
[1] CXL 3.0 Spec, 12.2.1.1 - RCH Downstream Port Detected Errors
[2] PCIe Base Spec r6.0, 7.8.4.3 Uncorrectable Error Mask Register,
7.8.4.6 Correctable Error Mask Register
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-19-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In Restricted CXL Device (RCD) mode a CXL device is exposed as an
RCiEP, but CXL downstream and upstream ports are not enumerated and
not visible in the PCIe hierarchy. [1] Protocol and link errors from
these non-enumerated ports are signaled as internal AER errors, either
Uncorrectable Internal Error (UIE) or Corrected Internal Errors (CIE)
via an RCEC.
Restricted CXL host (RCH) downstream port-detected errors have the
Requester ID of the RCEC set in the RCEC's AER Error Source ID
register. A CXL handler must then inspect the error status in various
CXL registers residing in the dport's component register space (CXL
RAS capability) or the dport's RCRB (PCIe AER extended
capability). [2]
Errors showing up in the RCEC's error handler must be handled and
connected to the CXL subsystem. Implement this by forwarding the error
to all CXL devices below the RCEC. Since the entire CXL device is
controlled only using PCIe Configuration Space of device 0, function
0, only pass it there [3]. The error handling is limited to currently
supported devices with the Memory Device class code set (CXL Type 3
Device, PCI_CLASS_MEMORY_CXL, 502h), handle downstream port errors in
the device's cxl_pci driver. Support for other CXL Device Types
(e.g. a CXL.cache Device) can be added later.
To handle downstream port errors in addition to errors directed to the
CXL endpoint device, a handler must also inspect the CXL RAS and PCIe
AER capabilities of the CXL downstream port the device is connected
to.
Since CXL downstream port errors are signaled using internal errors,
the handler requires those errors to be unmasked. This is subject of a
follow-on patch.
The reason for choosing this implementation is that the AER service
driver claims the RCEC device, but does not allow it to register a
custom specific handler to support CXL. Connecting the RCEC hard-wired
with a CXL handler does not work, as the CXL subsystem might not be
present all the time. The alternative to add an implementation to the
portdrv to allow the registration of a custom RCEC error handler isn't
worth doing it as CXL would be its only user. Instead, just check for
an CXL RCEC and pass it down to the connected CXL device's error
handler. With this approach the code can entirely be implemented in
the PCIe AER driver and is independent of the CXL subsystem. The CXL
driver only provides the handler.
[1] CXL 3.0 spec: 9.11.8 CXL Devices Attached to an RCH
[2] CXL 3.0 spec, 12.2.1.1 RCH Downstream Port-detected Errors
[3] CXL 3.0 spec, 8.1.3 PCIe DVSEC for CXL Devices
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-18-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL driver plans to use cper_print_aer() for logging restricted CXL
host (RCH) AER errors. cper_print_aer() is not currently exported and
therefore not usable by the CXL drivers built as loadable modules. Export
the cper_print_aer() function. Use the EXPORT_SYMBOL_NS_GPL() variant
to restrict the export to CXL drivers.
The CONFIG_ACPI_APEI_PCIEAER kernel config is currently used to enable
cper_print_aer(). cper_print_aer() logs the AER registers and is
useful in PCIE AER logging outside of APEI. Remove the
CONFIG_ACPI_APEI_PCIEAER dependency to enable cper_print_aer().
The cper_print_aer() function name implies CPER specific use but is useful
in non-CPER cases as well. Rename cper_print_aer() to pci_print_aer().
Also, update cxl_core to import CXL namespace imports.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-13-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge ACPI backlight driver updates, ACPI APEI updates, ACPI PRM updates
and changes related to ACPI PCC for 6.7-rc1:
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary).
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans
de Goede).
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede).
- Annotate struct prm_module_info with __counted_by (Kees Cook).
- Fix AER info corruption in aer_recover_queue() when error status data
has multiple sections (Shiju Jose).
- Make APEI use ERST max execution time value for slow devices (Jeshua
Smith).
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li).
- Define common macros to use when referring to various bitfields in the
PCC generic communications channel command and status fields and use
them in some drivers (Sudeep Holla).
* acpi-video:
ACPI: video: Add acpi_backlight=vendor quirk for Toshiba Portégé R100
ACPI: video: Add "vendor" quirks for 3 Lenovo x86 Android tablets
ACPI: video: Move Xiaomi Mi Pad 2 quirk to its own section
* acpi-prm:
ACPI: PRM: Annotate struct prm_module_info with __counted_by
* acpi-apei:
ACPI: APEI: Use ERST timeout for slow devices
ACPI: APEI: Fix AER info corruption when error status data has multiple sections
* acpi-pcc:
soc: kunpeng_hccs: Migrate to use generic PCC shmem related macros
hwmon: (xgene) Migrate to use generic PCC shmem related macros
i2c: xgene-slimpro: Migrate to use generic PCC shmem related macros
ACPI: PCC: Add PCC shared memory region command and status bitfields
mailbox: pcc: Support shared interrupt for multiple subspaces
mailbox: pcc: Add support for platform notification handling
There are many places that enable and disable AER interrupt, so move
them into helpers.
Link: https://lore.kernel.org/r/20230512000014.118942-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-11-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use FIELD_GET() and FIELD_PREP() to remove dependences on the field
position, i.e., the shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-9-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-8-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
aspm_attr_store_common(), which handles sysfs control of ASPM, has the same
problem as fb097dcd5a ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"): disabling L1 adds only ASPM_L1 (but not any of the L1.x
substates) to the "aspm_disable" mask.
Enabling one substate, e.g., L1.1, via sysfs removes ASPM_L1 from the
disable mask. Since disabling L1 via sysfs doesn't add any of the
substates to the disable mask, enabling L1.1 actually enables *all* the
substates.
In this scenario:
- Write 0 to "l1_aspm" to disable L1
- Write 1 to "l1_1_aspm" to enable L1.1
the intention is to disable L1 and all L1.x substates, then enable just
L1.1, but in fact, *all* L1.x substates are enabled.
Fix this by explicitly disabling all the L1.x substates when disabling L1.
Fixes: 72ea91afbf ("PCI/ASPM: Add sysfs attributes for controlling ASPM link states")
Link: https://lore.kernel.org/r/6ba7dd79-9cfe-4ed0-a002-d99cb842f361@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
This reverts commit fb097dcd5a.
After fb097dcd5a ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"), disabling L1 via pci_disable_link_state(PCIE_LINK_STATE_L1),
then enabling one substate, e.g., L1.1, via sysfs actually enables *all*
the substates.
For example, r8169 disables L1 because of hardware issues on a number of
systems, which implicitly disables the L1.1 and L1.2 substates.
On some systems, L1 and L1.1 work fine, but L1.2 causes missed rx packets.
Enabling L1.1 via the sysfs "aspm_l1_1" attribute unexpectedly enables L1.2
as well as L1.1.
After fb097dcd5a, pci_disable_link_state(PCIE_LINK_STATE_L1) adds only
ASPM_L1 (but not any of the L1.x substates) to the "aspm_disable" mask:
--- Before fb097dcd5a
+++ After fb097dcd5a
# r8169 disables L1:
pci_disable_link_state(PCIE_LINK_STATE_L1)
- disable |= ASPM_L1 | ASPM_L1_1 | ASPM_L1_2 | ... # disable L1, L1.x
+ disable |= ASPM_L1 # disable L1 only
# write "1" to sysfs "aspm_l1_1" attribute:
l1_1_aspm
aspm_attr_store_common(state = ASPM_L1_1)
disable &= ~ASPM_L1_1 # enable L1.1
if (state & (ASPM_L1_1 | ...)) # if enabling any substate
disable &= ~ASPM_L1 # enable L1
# final state:
- disable = ASPM_L1_2 | ... # L1, L1.1 enabled; L1.2 disabled
+ disable = 0 # L1, L1.1, L1.2 all enabled
Enabling an L1.x substate removes the substate and L1 from the
"aspm_disable" mask. After fb097dcd5a, the substates were not added to
the mask when disabling L1, so enabling one substate implicitly enables all
of them.
Revert fb097dcd5a so enabling one substate doesn't enable the others.
Link: https://lore.kernel.org/r/c75931ac-7208-4200-9ca1-821629cf5e28@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: work through example in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Instead of using a literal to clear bits, add PCI_EXP_DPC_CTL_EN_MASK
and use the usual pattern to modify a bitfield.
While at it, rearrange RMW code more logically together.
Link: https://lore.kernel.org/r/20231018113254.17616-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use FIELD_GET() to remove dependencies on the field position, i.e., the
shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231018113254.17616-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Convert 0x3ff literals in encode_l12_threshold() to
FIELD_MAX(PCI_L1SS_CTL1_LTR_L12_TH_VALUE) that explains the purpose of
the literal.
Link: https://lore.kernel.org/r/20230915155752.84640-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Instead of returning a bit obscure -1U, make code's intent of returning
the maximum representable value more obvious by returning U32_MAX.
Link: https://lore.kernel.org/r/20230915155752.84640-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
ghes_handle_aer() passes AER data to the PCI core for logging and
recovery by calling aer_recover_queue() with a pointer to struct
aer_capability_regs.
The problem was that aer_recover_queue() queues the pointer directly
without copying the aer_capability_regs data. The pointer was to
the ghes->estatus buffer, which could be reused before
aer_recover_work_func() reads the data.
To avoid this problem, allocate a new aer_capability_regs structure
from the ghes_estatus_pool, copy the AER data from the ghes->estatus
buffer into it, pass a pointer to the new struct to
aer_recover_queue(), and free it after aer_recover_work_func() has
processed it.
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Export and move the declaration of pcie_aer_is_native() to a common header
file to be reused by cxl/pci module.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230823234305.27333-3-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- Reorder struct pci_dev to avoid holes and reduce size (Christophe
JAILLET)
- Change pdev->rom_attr_enabled to single bit since it's only a boolean
value (Christophe JAILLET)
- Use struct_size() in pirq_convert_irt_table() instead of hand-writing it
(Christophe JAILLET)
- Explicitly include correct DT includes to untangle headers (Rob Herring)
- Fix a DOE race between destroy_work_on_stack() and the stack-allocated
task->work struct going out of scope in pci_doe() (Ira Weiny)
- Use pci_dev_id() when possible instead of manually composing ID from
dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai)
- Move pci_create_resource_files() declarations to linux/pci.h for alpha
build warnings (Arnd Bergmann)
- Remove unused hotplug function declarations (Yue Haibing)
- Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár)
- Unexport pcie_port_bus_type (Bjorn Helgaas)
- Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas)
- Fix BAR value printk formatting to accommodate 32-bit values (Bjorn
Helgaas)
- Use consistent pointer types for config access syscall get_user() and
put_user() uses (Bjorn Helgaas)
- Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas)
- Simplify pci_pio_to_address() (Bjorn Helgaas)
- Simplify pci_dev_driver() (Bjorn Helgaas)
- Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas)
- Fix code and doc typos and code formatting (Bjorn Helgaas)
- Tidy config space save/restore messages (Bjorn Helgaas)
* pci/misc:
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
PCI: Simplify pci_pio_to_address()
PCI/AER: Simplify AER_RECOVER_RING_SIZE definition
PCI: Use consistent put_user() pointer types
PCI: Fix printk field formatting
PCI: Remove unnecessary initializations
PCI: Unexport pcie_port_bus_type
PCI: mvebu: Remove unused busn member
PCI: Remove unused function declarations
PCI/sysfs: Move declarations to linux/pci.h
PCI/P2PDMA: Use pci_dev_id() to simplify the code
PCI/IOV: Use pci_dev_id() to simplify the code
PCI/AER: Use pci_dev_id() to simplify the code
PCI: apple: Use pci_dev_id() to simplify the code
PCI/DOE: Fix destroy_work_on_stack() race
PCI: Explicitly include correct DT includes
x86/PCI: Use struct_size() in pirq_convert_irt_table()
PCI: Change pdev->rom_attr_enabled to single bit
PCI: Reorder pci_dev fields to reduce holes
- Add locking for read/modify/write PCIe Capability Register accessors for
Link Control and Root Control (Ilpo Järvinen)
- Use PCIe RMW accessors for Link Control updates in PCI core, pciehp,
amdgpu, radeon, mlx5, ath10k, ath11k, ath12k (Ilpo Järvinen)
- Convert PCIBIOS error values in mlx5 to generic errnos (Ilpo Järvinen)
- Simplify pcie_capability_clear_and_set_word() control flow (Bjorn
Helgaas)
* pci/pcie-rmw:
PCI: Simplify pcie_capability_clear_and_set_word() control flow
net/mlx5: Convert PCI error values to generic errnos
PCI: Document the Capability accessor RMW improvements
wifi: ath10k: Use RMW accessors for changing LNKCTL
wifi: ath12k: Use RMW accessors for changing LNKCTL
wifi: ath11k: Use RMW accessors for changing LNKCTL
net/mlx5: Use RMW accessors for changing LNKCTL
drm/radeon: Use RMW accessors for changing LNKCTL
drm/amdgpu: Use RMW accessors for changing LNKCTL
PCI/ASPM: Use RMW accessors for changing LNKCTL
PCI: pciehp: Use RMW accessors for changing LNKCTL
PCI: Make link retraining use RMW accessors for changing LNKCTL
PCI: Add locking to RMW PCI Express Capability Register accessors
ACPI Platform Error Interfaces (APEI) convey error information to the OS.
If the APEI GHES driver receives information about PCI errors, it queues it
in aer_recover_ring for processing by the PCI AER code.
AER_RECOVER_RING_SIZE is the size of the aer_recover_ring FIFO and is
arbitrary, with no direct connection to hardware.
AER_RECOVER_RING_ORDER was only used to compute AER_RECOVER_RING_SIZE.
Remove it and define AER_RECOVER_RING_SIZE directly. No functional change
intended.
Link: https://lore.kernel.org/r/20230824193712.542167-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Don't assume that the device is fully under the control of ASPM and use RMW
capability accessors which do proper locking to avoid losing concurrent
updates to the register values.
If configuration fails in pcie_aspm_configure_common_clock(), the
function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store
only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather
than the content of the whole LNKCTL registers. It aligns better with
how pcie_lnkctl_clear_and_set() expects its parameter and makes the
code more obvious to understand.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 2a42d9dba7 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch")
Fixes: 7d715a6c1a ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230717120503.15276-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-3-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pci_enable_pcie_error_reporting() is used only inside aer.c. Stop exposing
it outside the file.
Link: https://lore.kernel.org/r/20230710232136.233034-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
