Enhanced the dBm to linear conversion function to accommodate negative
dBm values and improved the precision from 1 dBm to 0.25 dBm.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-2-pkshih@realtek.com
With spatch script, already remove most driver mutex and generate
lockdep_assert_wiphy(), and some are needed to refine manually further to
be expected:
- lockdep_assert_wiphy() always be the first statement in function
- return directly rather than unnecessary goto
- change assert from mutex to wiphy lock, which script can't convert
automatically.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250122060310.31976-9-pkshih@realtek.com
Since debugfs needs wiphy lock held, wiphy_locked_debugfs_{read,write}()
will be adopted, so implmenet file_ops::read/write along with their
arguments.
For reading part, it needs lots of changes because seq_file is not
suitable for wiphy_locked_debugfs_{read,write}(), so use spatch script
below to convert basically, and manually implement the functions.
@ rule1 @
identifier m;
@@
- seq_printf(m,
+ p += scnprintf(p, end - p,
...)
@ rule2 @
identifier m;
@@
- seq_puts(m,
+ p += scnprintf(p, end - p,
...)
For current version, only 4K buffer to output. To note ourselves, add
ellipsis symbol "..." to trailing if buffer is full. Later, add an option
to specify buffer size needed by a debugfs entry.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250122060310.31976-4-pkshih@realtek.com
The channel configuration of 8852BT is very similar but a little different
to 8852B, so use chip ID as condition to add extra handles including
external loss compensation, ADC configurations, spur settings and so on.
Don't affect existing 8852BE.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240607070659.80263-3-pkshih@realtek.com
Pattern match is an option of WoWLAN to allow the device to be woken up
from suspend mode when receiving packets matched user-designed patterns.
The patterns are written into hardware via WoWLAN firmware in suspend
flow if users have set up them. If packets matched designed pattern are
received, WoWLAN firmware will send an interrupt and then wake up the
device.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027052707.14605-8-pkshih@realtek.com
BB does many settings during setting channel. First is to configure CCK
for 2G channels, and then basic channel and bandwidth settings with a
encoded channel index that will report to driver when we receive packets.
Configure spur elimination to avoid spur of CSI and NBI tones in certain
frequencies. Also, it initializes BT grant to arrange path sharing with
BT according to band. Finally, reset TSSI and BB hardware to ensure it
stays in initial state.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220414062027.62638-12-pkshih@realtek.com
This driver named rtw89, which is the next generation of rtw88, supports
Realtek 8852AE 802.11ax 2x2 chip whose new features are OFDMA, DBCC,
Spatial reuse, TWT and BSS coloring; now some of them aren't implemented
though.
The chip architecture is entirely different from the chips supported by
rtw88 like RTL8822CE 802.11ac chip. First of all, register address ranges
are totally redefined, so it's impossible to reuse register definition. To
communicate with firmware, new H2C/C2H format is proposed. In order to have
better utilization, TX DMA flow is changed to two stages DMA. To provide
rich RX status information, additional RX PPDU packets are added.
Since there are so many differences mentioned above, we decide to propose
a new driver. It has many authors, they are listed in alphabetic order:
Chin-Yen Lee <timlee@realtek.com>
Ping-Ke Shih <pkshih@realtek.com>
Po Hao Huang <phhuang@realtek.com>
Tzu-En Huang <tehuang@realtek.com>
Vincent Fann <vincent_fann@realtek.com>
Yan-Hsuan Chuang <tony0620emma@gmail.com>
Zong-Zhe Yang <kevin_yang@realtek.com>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211008035627.19463-1-pkshih@realtek.com
