Sometimes PCIe Advanced Error Reporting(AER), like bad TLP or
Data link protocol error, happens due to unstable pci signal or
no response from PCI host.
pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0
pcieport 0000:00:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:00.0: AER: device [14c3:6786] error status/mask=000000c1/00006000
pcieport 0000:00:00.0: AER: [ 0] RxErr (First)
pcieport 0000:00:00.0: AER: [ 6] BadTLP
pcieport 0000:00:00.0: AER: [ 7] BadDLLP
pcieport 0000:00:00.0: AER: Corrected error message received from 0000:00:00.0
pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0
pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0
pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0
pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0
pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0
Setup callback function to call SER function to reset driver to recover
from these states
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250523062711.27213-2-pkshih@realtek.com
The rtw88 module names all start with the "rtw88_" prefix, but the
messages in dmesg mostly use the "rtw_" prefix. The messages from
rtw88_8723cs don't even have the underscore.
Use the KBUILD_MODNAME macro in every driver. This ensures that the
messages in dmesg will always use the module name.
Before:
Mar 17 15:54:19 ideapad2 kernel: rtw_8814au 2-4:1.0: Firmware version 33.6.0, H2C version 6
After:
Mar 17 16:33:35 ideapad2 kernel: rtw88_8814au 2-4:1.0: Firmware version 33.6.0, H2C version 6
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/29cd29ba-bc51-4d5b-ad48-a43c6ce72d56@gmail.com
Sparse lists the following:
CHECK drivers/net/wireless/realtek/rtw88/rtw8821c.c
drivers/net/wireless/realtek/rtw88/rtw8821c.c:1880:22: warning: symbol 'rtw8821c_hw_spec' was not declared. Should it be static?
The warning arises because the external declaration for rtw8821c_hw_spec
occurs in rtw8821ce.h, which is not included in rtw8821c.h. That line is
moved, and the now empty file rtw8821ce.h is deleted.
Symbol 'rtw8821c_hw_spec' can be made constant.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220524153716.20450-1-Larry.Finger@lwfinger.net
New device ID 0xb821 found on TP-Link T2E
Tested it with c821 driver. 2.4GHz and 5GHz works.
PCI id:
05:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device b821
Subsystem: Realtek Semiconductor Co., Ltd. Device b821
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220407075123.420696-2-honyuenkwun@gmail.com
Also strip out other duplicates from driver specific headers.
Ensure 'main.h' is explicitly included in 'pci.h' since the latter
uses some defines from the former. It avoids issues like:
from drivers/net/wireless/realtek/rtw88/rtw8822be.c:5:
drivers/net/wireless/realtek/rtw88/pci.h:209:28: error: ‘RTK_MAX_TX_QUEUE_NUM’ undeclared here (not in a function); did you mean ‘RTK_MAX_RX_DESC_NUM’?
209 | DECLARE_BITMAP(tx_queued, RTK_MAX_TX_QUEUE_NUM);
| ^~~~~~~~~~~~~~~~~~~~
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/realtek/rtw88/pci.c:1488:5: warning: no previous prototype for ‘rtw_pci_probe’ [-Wmissing-prototypes]
1488 | int rtw_pci_probe(struct pci_dev *pdev,
| ^~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/pci.c:1568:6: warning: no previous prototype for ‘rtw_pci_remove’ [-Wmissing-prototypes]
1568 | void rtw_pci_remove(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/pci.c:1590:6: warning: no previous prototype for ‘rtw_pci_shutdown’ [-Wmissing-prototypes]
1590 | void rtw_pci_shutdown(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126133152.3211309-18-lee.jones@linaro.org
RTL8821CE chipsets are 802.11ac dual-band WiFi + BT combo chips.
This patch adds the basic functions such as parameter tables, chip
information, power on flow.
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200616091625.26489-2-yhchuang@realtek.com
