This is needed for AP mode. Otherwise client sees the network, but
can't connect to it.
REG_FWHW_TXQ_CTRL+1 is set to WLAN_TXQ_RPT_EN (0x1F) in common mac
init function (__rtw8723x_mac_init), but the value was overwritten
from mac table later.
Tables with register values for phy parameters initialization are
copied from vendor driver usually. When table will be regenerated,
manual modifications to it may be lost. To avoid regressions in this
case new callback mac_postinit is introduced, that is called after
parameters from table are set.
Tested on rtl8723cs, that reuses rtw8703b driver.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250711084740.3396766-1-andrej.skvortzov@gmail.com
Some users have RTL8723DS chips with nearly blank efuse. Currently these
chips cannot connect when using rtw88, but they do work using the old
out-of-tree driver.
Use reasonable default values for TX power, antenna configuration, and
crystal cap if the chip's efuse is missing these things.
RTL8723D can use the same default values as RTL8703B, so simply move
the code from rtl8703b_read_efuse() to the shared function
__rtl8723x_read_efuse().
Link: https://github.com/lwfinger/rtw88/issues/157
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/5734afe7-0870-40b2-acd4-5657a02d7c56@gmail.com
RTL8812AU uses one set of TX power tracking tables for RFE 3, and
another set for everything else.
Move pwr_track_tbl from struct rtw_chip_info to struct rtw_rfe_def in
order to load the right set of tables for each RFE (RF front end) type.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/904d0ab1-c046-40cd-a3a3-d4fdcf663c9d@gmail.com
Some 8703b chips contain invalid EFUSE data, getting detailed
information is critical when analyzing issues caused by that.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-3-fiona.klute@gmx.de
The already supported 8723d chip is very similar to 8703b/8723cs,
split code that can be shared into a new module. The spec definition
tables are combined into a struct so we only need one EXPORT_SYMBOL
for them all.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240311103735.615541-2-fiona.klute@gmx.de
