The driver should call iwl_dbg_tlv_free even if debugfs is not defined
since ini mode does not depend on debugfs ifdef.
Fixes: 68f6f492c4 ("iwlwifi: trans: support loading ini TLVs from external file")
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the driver we only use skb_put* for adding data to the skb, hence data
never moves and skb_reset_mac_haeder would set mac_header to the first
time data was added and not to mac80211 header, fix this my using the
actual len of bytes added for setting the mac header.
Fixes: 3f7a9d577d ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer")
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't actually support >64 even for HE devices, so revert
back to 64. This fixes an issue where the session is refused
because the queue is configured differently from the actual
session later.
Fixes: 514c30696f ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After moving from commands to notificaitons in the d3 resume flow,
removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes
the return of the default value when looking up their version.
Returning zero here results in the driver sending the not supported
NON_QOS_TX_COUNTER_CMD.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider
cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't
advertise the command version at all. This made us send a command with a
bad size and because of that, the firmware hit a BAD_COMMAND immediately
after handling the REDUCE_TX_POWER_CMD command.
Fixes: 8f892e225f ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.eb20ff5050d3.Ie4fc6f5496cd296fd6ff20d15e98676f28a3cccd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In beacon template version 14, make sure to always set
the TWT IE offset before sending the beacon template command,
also in the debugfs inject_beacon_ie path.
If the TWT IE does not exist, the offset will be set to zero.
Fixes: bf0212fd8f ("wifi: iwlwifi: mvm: add beacon template version 14")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif
but we removed only from the pre-MLD version of the add_interface
callback. Remove it also from the MLD version.
Fixes: 0bcc215598 ("wifi: iwlwifi: mvm: init vif works only once")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_dev_info entries for these devices were incorrectly positioned
within the array, out of chronological order. Move them arround.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240527190228.a75e9a1eb86c.I003980f8ca60a96019657e396e848a07df6b92a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code that is parsing the amsdu_size module parameter and mapping it
to the corresponding Rx buffer size is common to all opmodes.
Move it into a function in iwlwifi, as preparation to a new op mode we
are working on.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240527190228.a3430d32923d.Iab3c22ef0df685f72f22dafc47021f0dc7bd6fa5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Upon start, the different opmodes are currently printing:
1. HW rev, which is already print by iwlwifi
2. The HW name (e.g. "Intel(R) Wi-Fi 7 BE201 320MHz")
cleanup things such as the hw rev won't be printed again, the HW name will
be printed by iwlwifi instead of each opmode.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240527190228.5c589c7abed0.I3590c4ee0ee99d1b207852c32d25d326afb327dd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware prefix is unused today, but it might still be
useful to have some information. Since the prefix will get
the intel/ directory in some cases, replace the prefix by
the full FW id which has all the information.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.527a1c72996d.If7588b854149d51605031fc9a70a650534351ef4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For active links, don't take information that may have been
received in probe responses, as those are not protected. For
inactive links, there may not be a choice.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.6947dc462fa9.I2076961211d6785c8a15b4308e0e87a413148222@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Modify iwl_mvm_ftm_set_secured_ranging() parameters to support
multiple versions of the target struct.
This is done as preparation for moving to the new range request
version.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.56d6aee320b3.I5a52fa93cd791d0229b392a20f076b7cebb110cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move setting the target's sta_id (and related flags) into a function
to support different versions of the target struct.
This is done as preparation for moving to the new range request
version.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.18e3a6a6f1cb.I85e3ee607b3947448532bc16730f8898a11c92b8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move setting the target flags into a dedicated function to support
different versions of the target struct.
This is done as preparation for moving to the new range request
version.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.9d22b61ce589.I7dbe596b4f677638d9a48c3f39b0826a9e35bea4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
6 GHz BSS SP client shall respect TX power limits advertised
by the AP in TPE elements, send the data to the firmware using
the AP_TX_POWER_CONSTRAINTS_CMD command, so do that.
Co-developed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.32f1e2e1447c.I58ac91c38585362aa42bb4a8a59c7d88e67bc40b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the new RX_FLAG_MACTIME_IS_RTAP_TS64 in mac80211 to report
a 64-bit timestamp in the mactime for radiotap only, in case we
report the synchronized PTP clock timestamp (otherwise we really
only have 32 bits anyway).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.4fc44356e7df.Ic8642d35f1090a415e09299a1bd409f51dfb6351@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a debugfs option to use the ptp clock time for rx device
timestamps. This can be useful to e.g. synchronize multiple NICs or
reporting the timestamp in the system clock instead of gp2.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240527190228.b197b4f3f9ed.I578ee916d5f517a2e3a89e890a8ea24065946427@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for enable/disable 11be for china and South Korea by
reading DSM function 12 from UEFI or ACPI and sending it to the FW.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.037613d03c87.I4e5ee63c0dbdd4bd6c48daee7b0c88462b702423@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we exit EMLSR due to a IWL_MVM_ESR_EXIT*, a MLO scan followed by a
link selection is scheduled with a delay of 30 seconds.
If during that 30 seconds EMLSR was blocked and unblocked
(IWL_MVM_ESR_BLOCKED*), we would still want to get the needed data from
the MLO scan and select link accordingly, and not return immediately to
EMLSR.
Fixes: 2f33561ea8 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512152312.caab27a8dd8f.I63f67e213d5e05416f71513a8d914917d59aa44f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to calculate again whether data should
be included or be handled externally, just check if any
space for it was already reserved.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.a3d3b4796460.I85bd3029baee24ebf0be04db7d6bf01834090869@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to allocate buf1 if we're not going to
write anything to it, and the condition for writing is
(correctly) "hdr_len > 0 && !iwl_trace_data()". Also
allocate the event space only under the same condition.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.a11e6490d053.Ie090beea70d2f271bb22c9b0e287dbd342fb2a96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we crash the firmware, we need to know why we decided to do so.
Almost all the callsites of iwl_force_nmi() print something in the logs
that explain why the driver decided to crash the firmware.
Debugfs doesn't print anything and it is then hard to understand why the
firmware has crashed.
Add a simple print in the debugfs hook to ease the debug.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512075822.e2558de222dc.Idd81777c47264e6f557b086625895c1dc2f667f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When AUTO_EML is set to false, this change ignores the exit criteria,
for testing purposes. Currently, if AUTO_EML is disabled, the
driver will not select a link or enter EMLSR, but will still exit if one
of the criteria is not fulfilled.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512072733.10a0b5da6ec2.I46fd578a3ef6cdbf14fdc4dfa97b4be008fe68e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We track which link is using which FW link ID, so there
really isn't a need to separately track which link IDs
are in use. Remove that code and check the table when
looking for a new link ID to use.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.1a67d8af815f.Ie642c12dce3ab55c688abd9a25918569e83e558a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All our firmware versions should now be printed in hex.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.cae4c562b2c3.I5043383bd0e81f872c55046afd2c6560f482c8e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In practice, iwl_trans_get_rxq_dma_data() will not fail,
it only can do that if called with the wrong arguments.
But it does have an error value and doesn't initialize
the argument when it fails, so don't use the value then.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.faf3a1b87589.I77c950173cb914676fbd28483e5ef420bb9f1bc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add new time point to get the details of scan failure
While on it added other missing enum to match with FW.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.6781e76990c4.Iadfb3f6dd63a98fc35019772266b5ebddc5b5270@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The two versions of iwl_mei_set_power_limit() are a bit different,
and while really the const isn't all that necessary on the inline,
it's still better to have it be the same.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.854427753c92.I557716085cb1f6a35d1f97640388fa421f42a56a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Just like with any other frame, mac80211 will do sanity checks
on no-data RX (representing e.g. sounding PPDUs), and if e.g.
the NSS is wrong, it will warn. This isn't a good idea if we
already know the frame wasn't received well, e.g. has bad PLCP.
Unless the firmware reports "no error", set the bad PLCP flag
to skip checks in mac80211.
Also, since we're now extracting two different values from the
info field, use le32_get_bits() for both.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.e6adcb9a6ece.Ic14c2e8ed5e80d48af78b2f04e9f08beeb62d68e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver reads xtal_calib from NVM file, but actually never uses it.
This is only used in dvm driver.
Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.c4d1a4571049.I7d7b73dccb793e220f023e0d049b082b043ca95e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
fw_running assumes that memory can be retrieved only after alive.
This assumption is no longer true as we support dump before alive.
To avoid invalid access to the NIC, check that STATUS_DEVICE_ENABLED
bit in trans status is set before dumping instead of the prior check.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.ca07138cedeb.I090e31d3eaeb4ba19f5f84aba997ccd36927e9ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These flags are not needed on 6 GHz channels, and anyway they were set
incorrectly.
This in turn resulted in alternating channel flags, preventing reg domain
rules to be merged together, so cfg80211 couldn't even send them to the
user space, as the regulatory domain was too large.
Fix it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.b0d51b2229f8.I092e21cde43320ffc2eff17f5748ff9c87c87fcf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an entry for setting the maximum TXOP time in microseconds.
The configured value can be read from the same entry.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.b8d17a9c1731.I57c33574a61edd68bd0ec1aa7009f31111fd7efe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
uAPSD can't be enabled on BSS or P2P Client if there is
another active interface (e.g. associated client). Allow
the code that apply those limitations to run on BSS as well.
Also forbid uAPSD if we have an IBSS or NAN interface in
the system.
Since we are now forbidding uAPSD in any concurrency
scenario, we don't need to check the number of PHY
contexts.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.4ac26534adf7.Ib892020177e86603b2be3a105f8717b9a15951d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The logic here is rather convoluted - we cannot get here with
lq_sta being NULL as mac80211 will (no longer) call us like
that, and since I removed the rate_control_send_low() call in
this function there's no longer any point in setting priv_sta
to NULL either.
So the only thing that remains to check is if we have actually
initialized our lq_sta->drv pointer, and exit if we didn't in
which case we'll use the data mac80211 already set up for the
low rate usage.
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Link: https://msgid.link/20240510170500.a4cdb41825eb.Id202bcc967c32829f70ab1412f8893b6eb7f78e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
Monitor/sniffer mode benefits from all types of frames, even if FCS
check fails. But we must mark frames as such.
Tested on iwl3945 only.
Signed-off-by: Andrii Batyiev <batyiev@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240509101140.32664-1-batyiev@gmail.com
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
In prph_mac_iter, ensure that all required addresses are dumped
even if a read fails. Currently, if a read fails, the region dump
is stopped, preventing the creation of prph_mac.lst.
By dumping all addresses even if a read fails, we can accurately
determine which addresses were successfully read and which were not.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Eilon Rinat <eilon.rinat@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.31fa9ce91a1c.Ia0c86f70c7a6874c15ffc6f8235aa88530208546@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During restart mac80211 notifies the driver about the association,
(if we was associated before the restart) which causes the driver to
request statistics from the FW. This causes to an immediate exit from
EMLSR after the restart is done, when the statistics notif is handled.
(too low TPT). There is no point in requesting statistics wnyway, since
the FW just started and don't have any.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240506095953.16638dec9f7b.I093514312179bae566ad8d73ffb0355c6eee288a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware has different names for this, which is confusing
as even the convention of having the firmware name in a comment
after the struct definition wasn't met here. Fix the naming,
but keep UATS in some of it since that's the BIOS name.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.b0dfe17d5f44.I8f5f5a831c7b934ce3140f838315827c018103bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Firmware 0x2F7 assert observed in Dell platforms when using GL HW.
This issue is mitigated by setting SCU_FORCE_ACTIVE during platform
low power states.
Driver shall indicate firmware to force SCU active by setting bit 29
in context info prph scratch control flags.
This mitigation is limited to Dell platforms with GL HW only.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ofer Kimelman <ofer.kimelman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.3d0c56c2bb1a.I97d9da402890d2085b5698666cceffc417b6b6df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While doing a passive scan, the firmware will report per-channel survey
information. This information is primarily useful for hostapd when doing
an ACS (Automatic Channel Selection). Collect this information and add
it to the result set when getting the survey information.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.9287591a5999.I54a3f9f6480d3694e67eea1cb4f5853beace2780@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When requested, the firmware can return per-channel survey information
generally used for ACS (automatic channel selection). Add the API for
this, which consists of a flag and a new channel survey notification.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.1facde532676.I3864ac4bc0fecb7fd5136e85c07585ab7100234b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The move of the scan complete notification handling to the wiphy worker
introduced a race between scan complete notification and scan abort:
- The wiphy lock is held, e.g., for rfkill handling etc.
- Scan complete notification is received but not handled yet.
- Scan abort is triggered, and scan abort is sent to the FW. Once the
scan abort command is sent successfully, the flow synchronously waits
for the scan complete notification. However, as the scan complete
notification was already received but not processed yet, this hangs for
a second and continues leaving the scan status in an inconsistent
state.
- Once scan complete handling is started (when the wiphy lock is not held)
since the scan status is not an inconsistent state, a warning is issued
and the scan complete notification is not handled.
To fix this issue, switch back the scan complete notification to be
asynchronously handling, and only move the link selection logic to
a worker (which was the original reason for the move to use wiphy lock).
While at it, refactor some prints to improve debug data.
Fixes: 07bf5297d3 ("wifi: iwlwifi: mvm: Implement new link selection algorithm")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.1f484a86324b.I63ed445a47f144546948c74ae6df85587fdb4ce3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a reading for all active EMLSR blocking reasons for testing
purposes.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.6d494a335e81.Ic0fa6a9636e3c1a3b1420e85e704a19d4a56e8d9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In iwl_mvm_rs_fw_rate_init() we have a variable cmd_id that
holds the command ID, so we can just use that instead of the
various calculations of it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.f894ede03b26.I18f03c272b1c0807767f2713f3ffbb2941c57d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After restart, we might want to end up with the same config
as before, even for multi-link/EMLSR. Therefore, don't reset
the stored link selection result in that case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.e81db303f1dc.Ie8267082f623d14376a2052d222e18da6545f34b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When there's an active link in a non-station vif, the station vif is
not allowed to enter EMLSR
Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule
an exit from EMLSR worker, but the worker cannot run before the
activation of the non-BSS link, as ieee80211_remain_on_channel already
holds the wiphy mutex.
Handle that by explicitly calling ieee80211_set_active_links()
to leave EMLSR, and then doing iwl_mvm_block_esr() only for
consistency and to avoid re-entering it before ready.
Note that a call to ieee80211_set_active_links requires to release the
mvm mutex, but that's ok since we still hold the wiphy lock. The only
thing that might race here is the ESR_MODE_NOTIF, so this changes its
handler to run under the wiphy lock.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If CSA is happening, then exit EMLSR to keep the better link,
which is the primary link unless that's doing the CSA with
quiet. This is done because we can't transmit the OMN frame
on a quiet link, but want to exit EMLSR during CSA for better
beacon reception, so we can follow the switch accurately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The new link selection algorithm uses defaults values for BSS load if
the BSS Load element was not published by the AP.
For 6 GHz, that value is 0. So if the best link is 6 GHz, the EMLSR
grade to always be equal to the grade of the best link,
and then the best link grade is getting a bonus of 10 percent, meaning
that we will never activate EMLSR.
Change the logic to not give a bonus for the best link.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.4614e6891dbd.Ie40eae0dd99d82ba60dea5b6dbcd42dcdf16b90d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When non default TTLM is applied, mac80211 may force us to use a specific
link (For example, if the only active link becomes a dormant link,
mac80211 will pick the first usable link and set it as active).
When default TTLM is applied, we have new usable links that we might want
to select. Therefore, trigger MLO scan and link selection upon change in
TTLM.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240505091420.ed2b386566a8.I0168e61da86b2027633743aaf5d97e483991f0dc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adjust EMLSR activation to account for traffic levels. By
tracking the number of RX/TX MPDUs, EMLSR will be activated only when
traffic volume meets the required threshold.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an event occurs to unblock EMLSR, the code attempts to re-enable
EMLSR. However, the current implementation always tries to activate
EMLSR, regardless of whether the blocker was set before the unblocking
event or not. If EMLSR was already unblocked, there is no need to
re-activate it.
Fixes: 6cf7df9f01 ("wifi: iwlwifi: mvm: Add helper functions to update EMLSR status")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.eb861402dac9.I6a1d9f774f5551cfab60ea37b71a62640496af9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EMLSR can't be activated from mac80211. Except for the debugfs, which is
intended for testing purposes. Currently we don't allow entering EMLSR
from debugfs if EMLSR is blocked, i.e. if mvmvif::esr_disable_reason is
not 0. But we need a way to activate EMLSR regardless of the vif being
blocked, for testing. Remove the check of esr_disable_reason
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.bc3c24d9e0e6.Iad60e22a0d7e2b2b989051e1140b6dc98bef7bcc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the reason for exiting EMLSR was a blocking reason, wait for the
corresponding unblocking event:
- if there is an ongoing scan - do nothing. Link selection will be
triggered at the end of it.
- If more than 30 seconds passed since the exit, trigger MLO scan, which
will trigger link selection
- If less then 30 seconds passed since exit, reuse the latest link
selection result
If the reason for exiting EMLSR was an exit reason (IWL_MVM_EXIT_*),
schedule MLO scan in 30 seconds.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240505091420.6a808c4ae8f5.Ia79605838eb6deee9358bec633ef537f2653db92@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
BT Coex disables EMLSR only for a 2.4 GHz link, but doesn't block the
vif from using EMLSR with a different link pair. In addition, storing it
in mvmvif:disable_esr_reason requires extracting the BT Coex bit before
checking if EMLSR is blocked or not for a specific vif.
Therefore, change the BT Coex bit to be an exit reason and not a
blocker. On link selection, EMLSR mode will be re-calculated for the 2.4
GHz link instead of checking that bit.
While at it, move the relevant function declarations to the EMLSR
functions area in mvm.h
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.a2e93b67c895.I183a0039ef076613144648cc46fbe9ab3d47c574@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Given how late we are in the cycle, merge the two fixes from
wireless into wireless-next as they don't see that urgent.
This way, the wireless tree won't need rebasing later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct net_device shouldn't be embedded into any structure, instead,
the owner should use the priv space to embed their state into net_device.
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from struct iwl_trans_pcie by converting it
into a pointer. Then use the leverage alloc_netdev() to allocate the
net_device object at iwl_trans_pcie_alloc.
The private data of net_device becomes a pointer for the struct
iwl_trans_pcie, so, it is easy to get back to the iwl_trans_pcie parent
given the net_device object.
[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://msgid.link/20240501165417.3406039-1-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This appears to work around a deadlock regression that came in
with the LED merge in 6.9.
The deadlock happens on my system with 24 iwlwifi radios, so maybe
it something like all worker threads are busy and some work that needs
to complete cannot complete.
Link: https://lore.kernel.org/linux-kernel/20240411070718.GD6194@google.com/
Fixes: f5c31bcf60 ("Merge tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://msgid.link/20240430234212.2132958-1-greearb@candelatech.com
[also remove unnecessary "load_module" var and now-wrong comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On older (pre-MLD API) devices, we started also calling
iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(),
but of course not also iwl_mvm_remove_link(). Since the
link ID was only released in iwl_mvm_remove_link() this
causes us to run out of FW link IDs very quickly. Fix
it by releasing the link ID correctly.
Fixes: a8b5d4809b ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW")
Link: https://msgid.link/20240420154435.dce72db5d5e3.Ic40b454b24f1c7b380a1eedf67455d9cf2f58541@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the RSSI of a link is low enough, don't use it for EMLSR.
If EMLSR is already active and the RSSI of one of the links gets low,
exit EMLSR by deactivating that link.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.73263c000263.Ieb2b18855a2719b5e18ad2fa8a3e855ca4e23938@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We can't be an EMLSR while suspended with wowlan. De-activate the
secondary link upon wowlan entring.
Set the blocking reason upon suspension and clear it upon resume.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.6ea884b3f095.I84233cb1c79ba538defafb8ddb983c47f04a400a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In EMLSR we need to track the RSSI of both links, and exit if the RSSI of
one of the links got too low.
For that request the FW to send statistics every 5 seconds when in EMLSR.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.6e19d596d77f.Ica2a75a031b1bced0dc2e18c5d365b5eb0d3ec07@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 invokes the driver callback drv_can_activate_links() from
ieee80211_set_active_links to verify it can activate the desired link
combination.
However, ieee80211_set_active_links is called with more than one link in
2 cases:
- After driver's link selection decided to enter EMLSR
- From debugfs, for testing purposes.
For both cases there is no need to recompute all the considerations
determining whether to activate EMLSR.
Instead, only check if the vif is not blocked for EMLSR.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.202cf5a9ef2c.I65e4698b730a8652ad8d1c01420aabb41a1d04fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Address scenarios where repeated entry and exit from EMLSR occur, such as
encountering missed beacons on a specific link,
while still discovering that link during a scan.
To mitigate this, introduce the EMLSR prevention mechanism, which operates
as follows:
- On each exit from EMLSR event, record the timestamp and the exit
reason.
- If two consecutive exits happen for the same reason within a
400-second window, enforce a 300-second EMLSR prevention.
- If a third exit for the same reason occurs within 400 seconds from the
second exit, enforce an extended EMLSR prevention of 600 seconds.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.d820ee98b300.I6406db40cf25eabdba602afd783466473b909216@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It's dangerous to re-initialize works repeatedly, especially
delayed ones that have an associated timer, and even more so
if they're not necessarily canceled inbetween. This can be
the case for these workers here during FW restart scenarios,
so make sure to initialize it only once.
While at it, also ensure it is cancelled correctly.
Fixes: f678061402 ("iwlwifi: mvm: disconnect in case of bad channel switch parameters")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.ddf8eece5eac.I4164f5c9c444b64a9abbaab14c23858713778e35@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are reasons for which we need to exit EMLSR, but not to block it
completely, and there are reasons for which we need to block EMLSR.
For both reason types we have the enum iwl_mvm_esr_state, when the
blocking reasons are stored in the `mvmvif::esr_disable_reason` bitmap.
This change introduces the APIs to use in the different cases:
- iwl_mvm_exit_esr - will exit from EMLSR mode.
- iwl_mvm_block_esr - will update the bitmap and exit EMLSR, to
be used for the blocking reasons only.
- iwl_mvm_unblock_esr - will update the bitmap. To be used for the
blocking reasons only.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.d54142a75876.I552926065521f5f848c37b0bd845494bd7865fb7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replaces the current logic with a new algorithm based on the link
grading introduced in a previous patch.
The new selection algorithm will be invoked upon successful scan to ensure
it has the necessary updated data it needs.
This update delegates the selection logic as the primary link
determiner in EMLSR mode, storing it in mvmvif to avoid repeated
calculations, as the result may vary.
Additionally, includes tests for iwl_mvm_valid_link_pair to validate
link pairs for EMLSR.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The functions that are link related, so they should be in link.c and
not in mld-mac80211.c. Move them.
Also move the different prototypes to the right place in mvm.h
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.e7c368256fa0.I6b15805a7c8a75d1814f1a829601daf4d3788731@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currenty iwl_mvm_mld_select_links() doesn't fully check that
EMLSR is allowed before selecting the 2 best links.
Although it will fail in ieee80211_set_active_links(), it is preferred
to avoid the redundent calculations.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.3578a93feb1a.I1cd91608bb73fbe19b8dfdf90e14ce40b98c3430@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2.4 GHz/LB (low band) link can't be used in an EMLSR links pair when
BT is on. But EMLSR is still allowed for a pair of links which none of
them operates in LB.
In the existing code, EMLSR will always be disabled if one of the
usable links is in LB (and BT is on).
Move this check to the code that verifies a specific pair of links,
and only if one of these links operates on LB - disable EMLSR.
Fixes: 10159a4566 ("wifi: iwlwifi: disable eSR when BT is active")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.2841006b5cc4.I45ffd583f593daa950322852ceb9454cbf497e24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function iwl_mvm_can_enter_esr() is (among others) calculating
if EMLSR mode is disabled due to BT coex by calling
iwl_mvm_bt_coex_calculate_esr_mode(), then stores the decision in
mvmvif::esr_disable_reason.
But there is no need to calculate this every time iwl_mvm_can_enter_esr
is called. Fix this by calculating it once after authorization,
and in iwl_mvm_can_enter_esr only check mvmvif::esr_disable_reason.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.a767e243366e.I3b32d36cda23f67dc103a28a9bdccb0039d22574@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For selecting what link(s) out of the usable ones
to activate, calculate a grade for a given link.
Calculation of a link grade is done as follows:
1. get the estimated throughput according to the RSSI of the link, this
will be the base grade
2. get the channel load from the BSS Load Element, subtracting the load
caused by us. Apply the factor on the grade.
3. puncturing factor: calculate the percentage of the punctured
subchannels (out of the total subchannels). Apply this on the grade.
The link grading will be used by the link selection mechanism in a later
patch.
Also add KUnit tests for it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240416134215.a6799dbd5643.If137ca6dc443606c7d8c99ec1fc38b325003a7c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Send AP_TX_POWER_CONSTRAINTS_CMD with no local maximum transmit
power constraint to FW and FW will update the TPE element with
required tx power limits.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.b6af4ecfcfe8.I07e8db349190e0c58c468c18477d8551288ac069@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will maintain a bitmap of reasons for which we want to avoid
enabling EMLSR.
For now, we have a single reason: BT coexistence, but we will add soon
more reasons. Make it a bitmap to make it easier to manage.
Since we'll impact the parameters that impact the enablement /
disablement of EMLSR from several places, introduce a generic function
that takes into account the current state and execute the decision that
must be taken.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.94c3590c6f27.I6a190da5025d0523ef483ffac0c64e26675041e6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for enable/disable 320 MHz for Japan and South Korea
by reading WBEM (WiFi Bandwidth Enablement per MCC) variable from
UEFI or ACPI and sending it to the FW.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.7946c3befbe1.I453c33f7ea48156ea2a3961f50a9003103fca5a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for enablement of PPAG for
- VLP for 6 GHz mode in CANADA, USA and ETSI countries.
- LPI for 6 GHz mode in CANADA.
- SP for 6 GHz mode in CANADA, USA and ETSI countries.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.e1893fe24ea3.Ic84cf576de0883c2184c939bdfad4b110a8a1815@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function is useful in other places, so move it in order to share
it.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.8e456d6c599e.Ibaa76864b30c990bfc35d886ec1344d513a96d14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of setting the UID to type mapping while building the
scan command, set the UID to type mapping only after the scan
request command was sent successfully.
This resolves a bug where in case a scan request command fails
and a recovery flow is initiated, the recovery flow would indicate
to mac80211 that scan is completed though it was not really started.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.7011e93363a2.Idb9b401414864dfc5540d8798a6cb2b192a2acc2@changeid
[also remove from iwl_mvm_scan_umac_v14_and_above()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function is supposed to return a uid on success, and an errno in
failure.
But it currently returns the return value of the specific cmd version
handler, which in turn returns 0 on success and errno otherwise.
This means that on success, iwl_mvm_build_scan_cmd will return 0
regardless if the actual uid.
Fix this by returning the uid if the handler succeeded.
Fixes: 687db6ff5b ("iwlwifi: scan: make new scan req versioning flow")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240415114847.5e2d602b3190.I4c4931021be74a67a869384c8f8ee7463e0c7857@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a PASN station is added, and an old PASN station already exists
for the same mac address, remove the old station before adding the
new one. Keeping the old station caueses old security context to
be used in measurements.
Fixes: 0739a7d70e ("iwlwifi: mvm: initiator: add option for adding a PASN responder")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.ef3544a416f2.I4e8c7c8ca22737f4f908ae5cd4fc0b920c703dd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi as we didn't consider it
as major enough to justify merging wireless tree to wireless-next. But
Stephen has an example merge resolution which should help with fixing
the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYNIqIRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt8jAf9H+o91boD34/qVdI5LWEcFhVKEkHpNtwm
Y1sTKNBEtN1Gs2zcljjO6PqN9N4v2+lA42KSpzP5M42FfpI2aATI2v8jYsKTXOl2
YVwF+8pDiAsi0YtQTxIthygjzTpsePCfj8z0xJaKGm195T+fMm9UebYETrfxxOp/
z5StsJIPI0twgSLKKUWvLpX4ESt0l0HLJY1ok99sk4Cj36EKn6b9LbBinDKr6GcQ
mGNtPyq0j4l0kS5qae9BbXZUohO54o8wiFnApdwGfA7S/kLY7eUtwZy7T050b62P
zbNafwZbIjrH7dNcGfe6Fdr7PjQYFeI5Nh7dXxqM2LJOQsYXU/tcWQ==
=WrPE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYEbzoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZsjZwgApoOcTn/mkX7DEViByMUpOrdNYqkJh+Tv
RkDDqhbA97i+zlxWp1dwtdfn0CYEcCW2XBucrfDNZMcR/cfXy2Wgdr6BD/FG9S2D
oQX6QQijO7g9uqNgDfIVAC0ftJEeWkM7YUhqNDVR751gjy2WOOJqPtSgNGd873By
P0rbHyfykHMzyYbwlzMLosO3RigefD1p1qkkODPf2OMo5A4tL1gL9AfEk3Kef9sf
9JHHWCLR378sm2sMpGw2Lxw4ypazl08ABu1yAWJk6Xipn80D/b08YUH/1yiKuq22
JrxhllJu2nqaHxXOzje2WEapTBz9tpTAwigOUQJiVZWm6ii19giGng==
=89Ft
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.9-rc2
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
* tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits)
MAINTAINERS: wifi: mwifiex: add Francesco as reviewer
kunit: fix wireless test dependencies
wifi: iwlwifi: mvm: include link ID when releasing frames
wifi: iwlwifi: mvm: handle debugfs names more carefully
wifi: iwlwifi: mvm: guard against invalid STA ID on removal
wifi: iwlwifi: read txq->read_ptr under lock
wifi: iwlwifi: fw: don't always use FW dump trig
wifi: iwlwifi: mvm: rfi: fix potential response leaks
wifi: mac80211: correctly set active links upon TTLM
wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW
wifi: iwlwifi: mvm: consider having one active link
wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF
wifi: mac80211: fix prep_connection error path
wifi: cfg80211: fix rdev_dump_mpp() arguments order
wifi: iwlwifi: mvm: disable MLO for the time being
wifi: cfg80211: add a flag to disable wireless extensions
wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc
wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
wifi: mac80211: fix mlme_link_id_dbg()
MAINTAINERS: wifi: add git tree for Realtek WiFi drivers
...
====================
Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the previous commit, I renamed the variable to differentiate
mac80211/mvm link STA, but forgot to adjust the check. The one
from mac80211 is already non-NULL anyway, but the mvm one can
be NULL when the mac80211 isn't during link switch conditions.
Fix the check.
Fixes: 2783ab506e ("wifi: iwlwifi: mvm: select STA mask only for active links")
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240325180850.e95b442bafe9.I8c0119fce7b00cb4f65782930d2c167ed5dd0a6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the HW restart flow with multi-link is very similar to
the initial association, we do need to reconfigure TLC there.
Remove the check that prevented that.
Fixes: d2d0468f60 ("wifi: iwlwifi: mvm: configure TLC on link activation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.a00adcfe381a.Ic798beccbb7b7d852dc976d539205353588853b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During restart, we haven't added BA sessions, so we also cannot
change them to switch between links when that happens in restart.
Short-circuit the appropriate function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.70ba08540db0.Ic604d384e660c755308a49a79d3f7e78bc27597c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During reconfig, we might send keys, but those should be only
sent to already active link stations. Iterate only active ones
to fix that issue.
Fixes: aea99650f7 ("wifi: iwlwifi: mvm: set STA mask for keys in MLO")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.c6818d1c6033.I6357f05c55ef111002ddc169287eb356ca0c1b21@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clearly, I put this flag into the wrong place: devices using the
code in mac80211.c only do not support EHT, so this isn't even
relevant. Fix this by moving the code to the right function.
Fixes: 32a5690e9a ("wifi: iwlwifi: mvm: support wider-bandwidth OFDMA")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.0d5fb0e971e4.I3b67c5e0ddcbe6e58143ec0bc4e40dd6dba4f863@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a requirement from OEMs to support new bits in DSM function 7,
which will indicate enablement of 5.9 GHz in Canada.
Add support for this by reading those bits from BIOS and sending it to the
FW. mask unii4 allow bitmap based on LARI_CONFIG_CHANGE_CMD version
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.5c31ccd73119.I0363992efc3607368648d34a7918b2534150a3ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This comment was added when iwl_mvm_alloc_sta_after_restart configured
the FW with an internal station, but then it was changed by
164a52d45e ("wifi: iwlwifi: mvm: send full STA during HW restart")
to configure the full sta, So there is no reason to "wait for mac80211 to
add the STA" as this is exacly where it happens.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240320232419.d656c2385b06.Icccd0640eb9f1ad72ff74792086435dfc0bee6eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
BZ_W is another member of the BZ family.
Just like BZ_U, we also need to override the STEP.
While at it, add a few missing CNVi Chip ID values.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.40c315d51b22.I6b2b2083f8d5b4ec4119aa5b51c21b8428d96060@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During HW restart only one link will be active initially and other links
are only activated again later on. With only a single link EMLSR cannot
be enabled and having it marked enabled confuses the internal state.
Mark EMLSR as disabled in the cleanup iterator, it can be reenabled
later one once this is possible.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.71eb622d6ce3.Ic4d50695b9bb332190dc712473096083aa96074b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During recovery, the chanctx_conf in mac80211 is still non-NULL even
though the channel context has not yet been assigned again. In that
case, the real count is actually lower.
Switch to instead count the phy_ctx assignment and ensure that the
assignment is cleared at the start of recovery.
Fixes: 12bacfc2c0 ("wifi: iwlwifi: handle eSR transitions")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.55f37339e7d1.I57006568a90ffb7a1232def1b2f3264dea711ba6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When restarting the HW, mac80211 first adds the STA back with only one
link enabled. This means that iwl_mvm_alloc_sta_after_restart will not
see the other links and will not do the assignment.
As such, do the assignment when mac80211 is activating the link for the
station.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.4a3273e5c6be.I7cb6cf096ab135f4b489f2806b116563624aa5ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For the mvm driver, data structures match what's in the firmware,
we allocate FW IDs for them already etc. During link switch we
already allocate/free the STA links appropriately, but initially
we'd allocate them always. Fix this to allocate memory, a STA ID,
etc. only for active links.
Fixes: 57974a55d9 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.f2093ff73465.Ie891e1cc9c9df09ae22be6aad5c143e376f40f0e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As it is possible that by the time the scan is completed the link was
already removed.
Fixes: 3a5a5cb067 ("wifi: iwlwifi: mvm: Correctly report TSF data in scan complete")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.619d3574a757.I0523e92547f0288c8b0119b1fdc5e967a5a8956e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't override the flags to zero here for 6 GHz
capable devices any more, but since LAR will be there,
this also shouldn't make a difference now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.73bff65d5597.I1ae23a509fad252c0237e74defba6cb74b6ca188@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_fw_dbg_collect_sync() unconditionally accesses 'trig' at
the beginning of the function, even though the data has an
inner union and 'trig' isn't necessarily always used, it can
be 'desc' instead. Add comments clarifying why this is OK,
that 'trig'/'desc' must be first in the struct and how in it
the use of the union's sub-structs is differentiated.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.49c3a39737cc.I91c588e0d66b49f0ee9103e8d4a0e501c2fd36d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When scanning on 6 GHz we allocate a set of short-SSIDs and BSSIDs to
probe. However, when we need to do an active scan because of a hidden
SSID, then we could add too many entries for probing causing an
assertion in the firmware input validation.
Reshuffle the code a bit to first calculate the maximum number of
short-SSIDs and BSSIDs that are permitted for the channel. Then ensure
that we do not set more than the permitted number of bits in the
bitmasks and turn on force_passive when we have surpassed the limit.
While at it, also change the logic so that allow_passive is always
disabled in case a hidden SSID is included. Previously, we might not
have done so if we added the short-SSID based on the number of BSSIDs
already in the request.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.e0b114b68d1d.Ib86afccdb955f0d221ef5d7b8afdc1d67c3542ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't have entries in the table that match the same
device; it's possible to have a specific entry followed by
a less specific entry (i.e. NNNN followed by ANY), but not
entries that are dead, where an earlier entry matches the
same as a later one.
Add a test similar to the existing devinfo test to catch
this situation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.826b859abd62.I8140d7e9ae52ac50c6830818f8f95ccd0d94b3d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an option to force sending unprotected ranging request even if the
station is associated to the responder or a PASN keys are configured.
This is used for testing.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.8523150148ec.I7ab6c547513717e69ec385f72a8f43ea00bd9e0a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new scan type that can be used for internal MLO purposes, i.e.,
in case updated BSS information is required. Currently only passive
scanning is supported.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.5ce3e756cf8f.I4a41065f6b3a6ec6c6e44e83bc97c277ff7c599e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a duplicate entry for 0x51f1, which shouldn't be present,
though the first entry will correctly be taken. Remove the second
one.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.3e995954d519.I0d028993e17e26b63c0ee89d7b1714ec88f2a158@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To support staring internal scan, refactor the scan code such
that the body iwl_mvm_reg_scan_start() is now moved to a local
function that can be used by other flows as well.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.e7833d4cfc53.I43c1c533c2a5243229002fde6360d423946c54fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware has handled quiet in CSA for a long time now, but
it didn't really matter much. However, now with quiet CSA on a
perhaps secondary link, we don't want mac80211 to stop queues,
we can continue using a link that's not requiring quiet. Set
the feature flag for MLO-capable devices indicating that we'll
handle the quiet entirely in the driver/device.
However, the firmware doesn't handle quiet in AP mode since we
don't really expect to really be needing that (without radar
detection), but - even for testing - make that work properly
by simply not pulling from TXQs in this scenario.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.fa75403b5eaa.Ie3ff02215f810fcfefd6a22c481567f94f61c0c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If, for any reason, we're going to attempt to flush the queues
while quiet CSA is happening, this cannot succeed. This could
be the case if for example mac80211 were to flush after TXing
e.g. a deauth frame due to disconnecting during the CSA.
In this case, drop the frames instead, the firmware won't let
us do any transmissions and may also become unhappy if we're
not going to disconnect quickly enough.
Currently this doesn't happen as mac80211 stops queues, but
we'll want to let mac80211 know not to stop queues for proper
multi-link support during CSA, so we need to handle this case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.d5d629f32ea8.I86d9b849d92273542bfc2d9c671b66179e7ebb72@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In version 4, in case of MLO GTK rekey during D3,
the firmware sends all the new keys, including
the keys on the non-active links.
Update also the non active link keys.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.6524de988ed3.Id065ddd2f4a71b0243c33ae0c5476ac41bfe2dc2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When waking up from wowlan, we iterate over the current
keys and remove those that were rekeyed.
With MLO, there might be keys of other links which should
not be removed.
Skip MLO keys on other links (other than the wowlan
active link).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.fdf527b50d61.I605a971d2d68107769dd363b896b471998259e64@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, the station id in d3 can be other than 0.
Do not assume the station id is 0 when waking
up from d3.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.6379619f2987.I83de9d868224df76eee8df8dbcf352636535821a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With MLO, the station id in wowlan can be other than 0.
Set the correct station in the protocol offload command.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.ace4f793872d.Id984110576a72acc84493217ca95564c3cd362bd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When releasing frames from the reorder buffer, the link ID was not
included in the RX status information. This subsequently led mac80211 to
drop the frame. Change it so that the link information is set
immediately when possible so that it doesn't not need to be filled in
anymore when submitting the frame to mac80211.
Fixes: b8a85a1d42 ("wifi: iwlwifi: mvm: rxmq: report link ID to mac80211")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.bbbd5e9bfe80.Iec1bf5c884e371f7bc5ea2534ed9ea8d3f2c0bf6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With debugfs=off, we can get here with the dbgfs_dir being
an ERR_PTR(). Instead of checking for all this, which is
often flagged as a mistake, simply handle the names here
more carefully by printing them, then we don't need extra
checks.
Also, while checking, I noticed theoretically 'buf' is too
small, so fix that size as well.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218422
Fixes: c36235acb3 ("wifi: iwlwifi: mvm: rework debugfs handling")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.4dc1eb3dd015.I32f308b0356ef5bcf8d188dd98ce9b210e3ab9fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Guard against invalid station IDs in iwl_mvm_mld_rm_sta_id as that would
result in out-of-bounds array accesses. This prevents issues should the
driver get into a bad state during error handling.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.d523167bda9c.I1cffd86363805bf86a95d8bdfd4b438bb54baddc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we read txq->read_ptr without lock, we can read the same
value twice, then obtain the lock, and reclaim from there
to two different places, but crucially reclaim the same
entry twice, resulting in the WARN_ONCE() a little later.
Fix that by reading txq->read_ptr under lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.bf4c62196504.I978a7ca56c6bd6f1bf42c15aa923ba03366a840b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the dump_data (struct iwl_fwrt_dump_data) is a union,
it's not safe to unconditionally access and use the 'trig'
member, it might be 'desc' instead. Access it only if it's
known to be 'trig' rather than 'desc', i.e. if ini-debug
is present.
Cc: stable@vger.kernel.org
Fixes: 0eb50c674a ("iwlwifi: yoyo: send hcmd to fw after dump collection completes.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.e2976bc58b29.I72fbd6135b3623227de53d8a2bb82776066cb72b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the rx payload length check fails, or if kmemdup() fails,
we still need to free the command response. Fix that.
Fixes: 21254908cb ("iwlwifi: mvm: add RFI-M support")
Co-authored-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.db2fa0196aa7.I116293b132502ac68a65527330fa37799694b79c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the non MLD firmware flows, although the deflink is used, the mapping
of link ID to BSS configuration was missing, which causes flows that need
this mapping to crash.
Fix this by adding the link ID to BSS configuration mapping to non MLD
flows as well.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.0b5c361e8f0c.Ib11f41815d2efa5d1ec57f855de4c8563142987b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Do not call iwl_mvm_mld_get_primary_link if only one link
is active.
In that case, the sole active link should be used.
iwl_mvm_mld_get_primary_link returns -1 if only one link
is active causing a warning.
Fixes: 8c9bef26e9 ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.6c50061bf69b.I05b0ac7fa7149eabaa5570a6f65b0d9bfb09a6f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MLO ended up not really fully stable yet, we want to make
sure it works well with the ecosystem before enabling it.
Thus, remove the flag, but set WIPHY_FLAG_DISABLE_WEXT so
we don't get wireless extensions back until we enable MLO
for this hardware.
Cc: stable@vger.kernel.org
Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240314110951.d6ad146df98d.I47127e4fdbdef89e4ccf7483641570ee7871d4e6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki).
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor).
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki).
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi).
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki).
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver (Srinivas
Pandruvada).
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen).
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki).
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno).
-----BEGIN PGP SIGNATURE-----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=Is/Y
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly change the thermal core in a few ways allowing thermal
drivers to be simplified, in particular in their removal and failing
probe handling parts that are notoriously prone to errors, and
propagate the changes to several drivers.
Apart from that, support for a new platform is added (Intel Lunar
Lake-M), some bugs are fixed and some code is cleaned up, as usual.
Specifics:
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki)
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor)
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki)
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi)
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki)
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver
(Srinivas Pandruvada)
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen)
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki)
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)"
* tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: remove unnecessary check in trip_point_hyst_store()
thermal: intel: int340x_thermal: Use thermal zone accessor functions
thermal: core: Remove excess empty line from a comment
thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID
thermal: core: Eliminate writable trip points masks
thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly
wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly
mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: core: Drop the .set_trip_hyst() thermal zone operation
thermal: core: Add flags to struct thermal_trip
thermal: core: Move initial num_trips assignment before memcpy()
thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS
thermal: intel: Adjust ops handling during thermal zone registration
thermal: ACPI: Constify acpi_thermal_zone_ops
thermal: core: Store zone ops in struct thermal_zone_device
thermal: intel: Discard trip tables after zone registration
thermal: ACPI: Discard trips table after zone registration
thermal: core: Store zone trips table in struct thermal_zone_device
...
The fourth "new features" pull request for v6.9 with changes both in
stack and in drivers. The theme in this pull request is to fix sparse
warnings but we still have some left in wireless subsystem. Otherwise
quite normal.
Major changes:
rtw89
* NL80211_EXT_FEATURE_SCAN_RANDOM_SN support
* NL80211_EXT_FEATURE_SET_SCAN_DWELL support
rtw88
* support for more rtw8811cu and rtw8821cu devices
mt76
* mt76x2u: add Netgear WNDA3100v3 USB
* mt7915: newer ADIE version support
* mt7925: radio temperature sensor support
* mt7996: remove GCMP IGTK offload
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXq4hARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtOawf9Gf2FAi56zA/4vKJPE/mZzRvNodj/u9WL
mEX3KERw744IEmWY0yXEAyvzKkkNqUUtmdUbbsnXnnEtzsVZ2oRmOZdXsvEW3vOD
IEsjWY/405MBWyuBttAa6orBSgelr99k86HzoLN86s52HmliVDhr2EUnYIf2O++9
SVhHFKE4BMVCO6hlyEg419K9M2VhWtBDNYweoXAfn8Y1byAw6Pt6WunjRuGwJG5n
qvcrZcFCFSa3daPpx0uIA/yiSjZlq0hwVC3r/PnoX/r1FDR8tS2ecvC2rP3MaZJ+
1x3IcNvwC97D80wvdW+f+qKtV4OXZefsZpzJJpvREH8FbAgYLDef0Q==
=gln7
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The fourth "new features" pull request for v6.9 with changes both in
stack and in drivers. The theme in this pull request is to fix sparse
warnings but we still have some left in wireless subsystem. Otherwise
quite normal.
Major changes:
rtw89
* NL80211_EXT_FEATURE_SCAN_RANDOM_SN support
* NL80211_EXT_FEATURE_SET_SCAN_DWELL support
rtw88
* support for more rtw8811cu and rtw8821cu devices
mt76
* mt76x2u: add Netgear WNDA3100v3 USB
* mt7915: newer ADIE version support
* mt7925: radio temperature sensor support
* mt7996: remove GCMP IGTK offload
* tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits)
wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode
wifi: rtw89: wow: set security engine options for 802.11ax chips only
wifi: rtw89: update suspend/resume for different generation
wifi: rtw89: wow: update config mac function with different generation
wifi: rtw89: update DMA function with different generation
wifi: rtw89: wow: update WoWLAN status register for different generation
wifi: rtw89: wow: update WoWLAN reason register for different chips
wifi: brcm80211: handle pmk_op allocation failure
wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR
wifi: rtw89: coex: When Bluetooth not available don't set power/gain
wifi: rtw89: coex: add return value to ensure H2C command is success or not
wifi: rtw89: coex: Reorder H2C command index to align with firmware
wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic
wifi: rtw89: coex: add init_info H2C command format version 7
wifi: rtw89: 8922a: add coexistence helpers of SW grant
wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt
wifi: cw1200: restore endian swapping
wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns
wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte
wifi: rtw88: 8821c: Fix false alarm count
...
====================
Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the link conf to the abort_channel_switch driver
method so the driver can handle things correctly.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, we need the link id in the GTK key to be given by
the driver after rekeying in wowlan, so add that.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094500.ce1bfc83a680.I43a6f8ab2804ee07116a37d5b9ec601b843464b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few models require *.pnvm files while we don't declare them via
MODULE_FIRMWARE(). This resulted in the breakage of WiFi on the
system that relies on the information from modinfo (e.g. openSUSE
installer image).
This patch adds those missing MODULE_FIRMWARE() entries for *.pnvm
files.
type=feature
ticket=none
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1207553
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/20240228163837.4320-1-tiwai@suse.de
[move to appropriate files]
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
(skb_transport_header(skb) - skb_network_header(skb))
can be replaced by skb_network_header_len(skb)
Add a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len()
to catch cases were the transport_header was not set.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All of the thermal_zone_device_register_with_trips() callers pass zero
writable trip points masks to it, so drop the mask argument from that
function and update all of its callers accordingly.
This also removes the artificial trip points per zone limit of 32,
related to using writable trip points masks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
It is now possible to flag trip points with THERMAL_TRIP_FLAG_RW_TEMP
to allow their temperature to be set from user space via sysfs instead
of using a nonzero writable trips mask during thermal zone registration,
so make the iwlwifi code do that.
No intentional functional impact.
Note that this change is requisite for dropping the mask argument from
thermal_zone_device_register_with_trips() going forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Merge thermal core changes for 6.9:
- Minor fixes for thermal governors (Rafael J. Wysocki, Di Shen).
- Trip point handling fixes for the iwlwifi wireless driver (Rafael J.
Wysocki).
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno).
* thermal-tmp:
thermal: gov_power_allocator: Avoid overwriting PID coefficients from setup time
thermal: sysfs: Fix up white space in trip_point_temp_store()
iwlwifi: mvm: Use for_each_thermal_trip() for walking trip points
iwlwifi: mvm: Populate trip table before registering thermal zone
iwlwifi: mvm: Drop unused fw_trips_index[] from iwl_mvm_thermal_device
thermal: core: Change governor name to const char pointer
thermal: gov_bang_bang: Fix possible cooling device state ping-pong
thermal: gov_fair_share: Fix dependency on trip points ordering
In the operational statistics notifications (both old and new
API) the driver receives the statistics per phy.
currently this statistics wasn't handled because they wasn't needed.
Now the channel_load_by_us parameter in these statistics will be used
for the link grading calculation (implemented in another patch),
so store its value in phy_ctxt.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240218194912.e84f975b69ee.Ibbc7817135827e45adaaa47b796be165f9f1ca48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clean up kernel-doc in iwl-fh.h. In one case, rename the
(otherwise unused) struct member to have the correct name.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.4a342ac06f0b.I604ea964a094b43df0ab29b06231c2f42d6bd79b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At that point in the code mvm->mutex has already been taken, so jump to
out_noreset in order to unlock before returning the error.
Fixes: 8c9bef26e9 ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.21de6e68d9e5.I3c0ebe577dec6b26ab6b4eac48035d6f35a8b0f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fill the new puncture mask in the PHY context command if
supported. In this case, also don't send it in the link
context command.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.16d9f5fc41df.I9eeb55787d8483f820f5790e8874761f598da314@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The version 6 command adds the puncture mask to the PHY
context and is otherwise the same. Support that in the
API definitions, but don't fill it yet.
While at it, also mark the field as removed from the link
context command since it moved from there to PHY context.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.2156fca5b1a5.I57f47f26ec0d96ecfb1192039f72b1c6d4e8a357@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To support wider-bandwidth OFDMA we need to configure the
PHY context in the firmware, which will in turn configure
the DSP accordingly. Pass the relevant information down.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.ca666ede5dd6.I357972823d20e9045e2c97dbb7ac24fe9f5a6e41@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, function to check if beacon countdown is complete uses deflink
to fetch the beacon and check the counter. However, with MLO, there is
a need to check the counter for the beacon in a particular link.
Add support to use link_id in order to fetch the beacon from a particular
link data.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Those devices' fifos are numbered differently.
Because of that, we were looking at the size of the VO fifo size to
determine the size of the A-MSDU which led to a lower throughput.
Note that for those devices the only user of the AC -> fifo mapping is
the size limitation of A-MSDU.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.da336ca2fa0a.I73e44d5fc474ebb6f275b9008950e59c012f33b2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The resume code path assumes that the TX queue for the offloading TID
has been configured. At resume time it then tries to sync the write
pointer as it may have been updated by the firmware.
In the unusual event that no packets have been send on TID 0, the queue
will not have been allocated and this causes a crash. Fix this by
ensuring the queue exist at suspend time.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.6632e6dc7b35.Ie6e6a7488c9c7d4529f13d48f752b5439d8ac3c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 might (due to an unavoidable race) cancel a ROC that has already
expired. In that case the driver should not send the session protection
cmd to cancel the ROC.
When session protection is supported, the te_data::id field is reused
to save the configuration id. Check it before sending the cmd.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.30176bf869d9.Id811c20d3746b870cbe0c946bbfe1c0ab0a290cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is set when a P2P ROC ends, and uses as an indication inside
iwl_mvm_roc_done_wk that the resources used for this ROC (sta/link)
needs to be flushed/deactivated (respectively).
But we also have IWL_MVM_STATUS_ROC_RUNNING, which is set whenever
P2P ROC starts, and is not even used in iwl_mvm_roc_done_wk.
Use IWL_MVM_STATUS_ROC_RUNNING as an indicator, and remove the redundant
bit.
While at it, add a call to synchronize_net also for the
AUX ROC case, which is missing in the existing code.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.0494f75de311.Ic4aacacf7581a5c9046c4f1df87cbb67470853e7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a conflict already and some upcoming changes
also depend on changes in wireless for being conflict-
free, so pull wireless in to make all that easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There may be different hardware or configurations supported,
so check for our own EMLSR capability before allowing it to
be used, in addition to checking the AP's.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240208185302.036443611696.If33caabd7cf372834287863b40b2d6d1ef1ca3f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With C99 bool we really also should use true/false, not the
upper-case variants, wherever they may actually be coming
from. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240208185302.5732dd306ee9.Ifc07c026ac3779429e3dc949e96c9437e89f7bf9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
New additions to the P2P specification use action frames to
extend the P2P device discovery and service discovery. Thus,
configure the P2P Device link to accept all management frames.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240208185302.7ae41234de7b.Ie0b08d4b965409ef6df5505396927567fb899d52@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware will now start with 1500 byte A-MSDU size
rather than 3500 as before, and that seems to cause some
really hard to debug problems. Keep A-MSDU disabled if
the size is less than 2000 to disable this for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240208185302.3dcd0a1767d0.I450d35f3085b3b04a96dd1e1e7d8c27bda9ce8f5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
6 GHz STA supports different power types as LPI, SP, VLP.
and this information is provided by regulatory info.
Add support in driver to parse the power type capability in
regulatory info from FW and set it to the channel flags.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240208185302.9c6a4acabdb3.I501de5c0d86b9702bf61158a2e91c954a1da9a2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MFP, do not disconnect if an unprotected deauth
or disassoc was received during D3.
For that, need to configure wowlan with MFP (IS_11W_ASSOC).
Now, in case of an unprotected deauth/disassoc, the wakeup
reason returned by the firmware will be:
IWL_WAKEUP_BY_11W_UNPROTECTED_DEAUTH_OR_DISASSOC
(and not IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_DEAUTH
which will cause a disconnection).
Also, report this reason to cfg80211.
In another patch, the driver will send an SA query.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.fde438a22e3f.I3c8497520aaa95a22febff727b0ad08146965d47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The #ifdef check around the function definition for two functions was
changed without also changing the one on the declaration:
drivers/net/wireless/intel/iwlwifi/fw/uefi.c:359:6: error: redefinition of 'iwl_uefi_get_sgom_table'
359 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/wireless/intel/iwlwifi/fw/uefi.c:11:
drivers/net/wireless/intel/iwlwifi/fw/uefi.h:294:6: note: previous definition of 'iwl_uefi_get_sgom_table' with type 'void(struct iwl_trans *, struct iwl_fw_runtime *)'
294 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans, struct iwl_fw_runtime *fwrt)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/fw/uefi.c:392:5: error: redefinition of 'iwl_uefi_get_uats_table'
392 | int iwl_uefi_get_uats_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/fw/uefi.h:299:5: note: previous definition of 'iwl_uefi_get_uats_table' with type 'int(struct iwl_trans *, struct iwl_fw_runtime *)'
299 | int iwl_uefi_get_uats_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
Adapt it by merging the declarations into the existing #ifdef block.
Fixes: 74f4cd7107 ("wifi: iwlwifi: take SGOM and UATS code out of ACPI ifdef")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/20240212112343.1148931-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We've seen this warning trigger, and while the reason is
probably obvious, I haven't been able to see it yet. Add
more information to the warning message to help identify
the cause. Also print out both index and SSN for all the
messages.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.581427dc81fc.I9a109d02b4349807dce521c693ecd3516ec58cc0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is always a bit confusing, the code first does all the
reclaim (with its own debug messages), and _then_ prints it
got a BA notification from firmware. Turn that around.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.825245e0803f.Ic607c57f43eb7c7ff122ffee8f3994fd040d578f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The flags argument to enable/disable beacon filtering functions
is unused and always zero, so just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.2c739c1034a5.I8619949ad4ebd31593d10ece371ebdc6c48db98f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware (later) actually uses the values even for keys
that are invalid as far as the host is concerned, later in
rekeying, and then only sets the low 48 bits since the PNs
are only 48 bits over the air. It does, however, compare the
full 64 bits later, obviously causing problems.
Remove the memset and use kzalloc instead to avoid any old
heap data leaking to the firmware. We already init all the
other fields in the struct anyway. This leaves the data set
to zero for any unused fields, so the firmware can look at
them safely even if they're not used right now.
Fixes: 79e561f0f0 ("iwlwifi: mvm: d3: implement RSC command version 5")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.462101146fef.I10f3855b99417af4247cff04af78dcbc6cb75c9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newer firmware versions no longer needs this command. Don't send it if
the firmware advertises it does not need it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.527595995aa0.I0381bef1dc815945f2ec194fecc657e5c75bb2ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware doesn't need the MFP flag for the GTK, it can even make the
firmware crash. in case the AP is configured with: group cipher TKIP and
MFPC. We would send the GTK with cipher = TKIP and MFP which is of course
not possible.
Fixes: 5c75a208c2 ("wifi: iwlwifi: mvm: support new key API")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.2f2c602ab3c6.If13b2e2fa532381d985c07df130bee1478046c89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This image can be pretty big (I've seen order-7 allocations!),
and we later have to copy it to DMA memory (in newer FW even
there it won't need to be contiguous), so we can easily deal
with it being in vmalloc. Use kvmemdup()/kvfree() for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.9b4c06b5d533.Idf699b36ec95ee36f530355cd2cb1da297a098f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For non-QoS nullfunc packets we currently do the duplicate detection,
which seems a bit wrong. Fix the code to check for _any_ instead of
just _qos_ nullfunc.
Also remove setting the RX_FLAG_DUP_VALIDATED flag, we haven't done
anything here; in particular, we haven't checked for multicast in an
MLO scenario.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4fea3bd2d4a6.Ib80764f4581d875cff08469016894f7c817c3828@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When retrieving the queue index ("SCD SSN") from the TX response,
it's currently masked with 0xFFF. However, now that we have queues
longer than 4k, that became wrong, so make the mask depend on the
hardware family.
This fixes an issue where if we get a single frame reclaim while
in the top half of an 8k long queue, we'd reclaim-wrap the queue
twice (once on this and then again on the next non-single reclaim)
which at least triggers the WARN_ON_ONCE() in iwl_txq_reclaim(),
but could have other negative side effects (such as unmapping a
frame that wasn't transmitted yet, and then taking an IOMMU fault)
as well.
Fixes: 7b3e42ea2e ("iwlwifi: support multiple tfd queue max sizes for different devices")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4148a6ef54e0.I733a70f679c25f9f99097a8dcb3a1f8165da6997@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After waking from D3, we set the iPN given by the firmware.
For some reason, CIPHER_SUITE_AES_CMAC was missed.
That caused copying garbage to the iPN - causing false replays.
(since 'seq' is on the stack, and the iPN from the firmware
was not copied into it, it contains garbage which later is
copied to the iPN key).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.2be5b35be30f.I99db8700d01092d22a6d76f1fc1bd5916c9df784@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If during D3 there was both a GTK rekey and a
disconnection, when waking up, we must first
update the new keys and then disconnect.
The reason is that when disconnecting we first need
to remove the keys.
Trying to remove invalid keys results in firmware
assert.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.68cf3974b5d7.Iac9b71a1906ab973aba9baadc9e923b63c0b4945@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With unlimited pseudo-D3, we can get stuck here in the read if
the firmware never wakes up. All of our testing infrastructure
however will anyway give up after at most a minute, so there's
no value in that.
Limit this to about a minute to avoid getting stuck with the
RTNL held forever, which basically makes the machine unusable
and then we can't even understand what caused the failure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.ca55b3a7fa8d.Id746846f187442ebc689416d2688f2bd9278c0e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When waking from D3 (and a GTK rekey happened during
D3), the key itself is saved in iwl_wowlan_status_data::gtk
array, but the PN is saved in iwl_wowlan_status_data::gtk_seq
array.
The indices (of the same key) might differ in both arrays.
Fix using the gtk array index in the gtk_seq array.
Rather, iterate and search for the correct key in the
gtk_seq array.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.bdd0511c007d.I3325288c64c010a4d008ac4429de1c2b14ef764c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The client needs to disconnect from AP in case of more than 19 missed
beacons only if no data is coming from that AP, otherwise it needs to
stay connected.
Signed-off-by: Daniel Amosi <amosi.daniel@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.080195242c18.Ib166fc4e46666165a88e673a4a196cb8f18fdec4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Before sending SESSION PROTECTION cmd the driver verifies that the
link for which the cmd is going to be sent is active.
The existing code is checking it only for MLD vifs,
but also the deflink (in non-MLD vifs) needs to be active in order
the have a session protection for it.
Fix this by checking if the link is active also for non-MLD vifs
Fixes: 1350658373 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240205211151.c61820f14ca6.Ibbe0f848f3e71f64313d21642650b6e4bfbe4b39@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The BIOS tables SGOM and UATS are read from UEFI, but require
additional tables (WGDS and DSM func 3, respectively) which used to be
read from ACPI only, so the code handling those tables had to be under
ifdef ACPI. But now the driver reads those tables (WGDS and DSM) from
both ACPI and UEFI, so SGOM and UATS code shouldn't be under ifdef ACPI
anymore.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.dcaa3325773f.I649079c842369dcae3a362842322deca422a61d5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
CT kill should stop doing a lot of TX etc. to cool down the
NIC, but we don't stop all commands from going to the NIC,
and as such we shouldn't abort queue sync, since it can get
confused if we do, warning that we do it twice at the same
time etc. Only stop it when we'd also not send it in the
first place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4e0745e2cd97.I311dc623ce68de6a2da3c21c8d84a387844f714a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
define the timeout on RX queues notification as a macro so it will be
clearer.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.a6985ea87751.Iafb7ae13aa58d66512e4b3fa6c75149c75cbc305@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It's a bit tricky to understand what's going on here, add
more data to the warning messages to make that clearer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.1df82a509636.I2f71811569a5c48eb166c4caa779af2d6160ad33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Advertise support for protected ranging negotiation if the firmware
supports it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206135637.9bb7e13ad18c.I578af1c9836e91069ce318b265bd221f42955992@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As documented in the comment, this queue sync was here to
ensure that an async IWL_MVM_RXQ_NSSN_SYNC queue sync won't
race with setting up a new BA session with the same BAID.
However, we no longer do IWL_MVM_RXQ_NSSN_SYNC queue sync,
so we can remove this as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Grumbach, Emmanuel <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.0a09ab337b54.I0dfe239dc30577a2ff23f910b10e9957364ccc78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code here is the pre-MLD API, but of course older FW
that doesn't support MLD APIs cannot support EHT. Remove
some code that shouldn't be there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.bde5a9d87759.I4c69dd94416f92b0f1f53dd57dafecbec643600d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This debugfs entry is used to configure the rx_phyinfo.
Currently we are sending the phy cmd only for the deflink.
Change it to send the cmd for all active links of the vif
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240204235836.a68ee2b6cb58.Iddc47c608ec990b12be0ae5b1ee89bcf6beb0f6a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In much of the PHY context handling code the chandef
coming from mac80211 is read-only, mark them const
to make that clearer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.e7fbd3e26d85.I72d72e61dc5f5fc76c53e32cb60b66237eaedec3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for
- PPAG revision 3 in BIOS to enable PPAG in UHB
- PPAG command version 5, this command allows OEM to control
enablement of PPAG for LPI for UHB mode in USA and ETSI countries.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.d17425824b11.If2c1b29e3c579f4135383681af2d625cfe2cffcd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On new devices the HW rfkill shutdown doesn't need to be handled
"as fast as possible", so disallow the immediate shutdown mode
here via documentation and a warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.794c5387e67e.I064365428815ec3135afa345fbbde78449b60203@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a
finalizing worker using the deflink. With MLO, there is a need to do it
on a given link basis.
Pass link ID of the link on which CSA needs to be finalized.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, function to update beacon counter uses deflink to fetch
the beacon and then update the counter. However, with MLO, there is
a need to update the counter for the beacon in a particular link.
Add support to use link_id in order to fetch the beacon from a particular
link data during beacon update counter.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-3-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Aloka originally suggested that puncturing should be part of
the chandef, so that it's treated correctly. At the time, I
disagreed and it ended up not part of the chandef, but I've
now realized that this was wrong. Even for clients, the RX,
and perhaps more importantly, CCA configuration needs to take
puncturing into account.
Move puncturing into the chandef, and adjust all the code
accordingly. Also add a few tests for puncturing in chandef
compatibility checking.
Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/
Suggested-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A DoS tool that injects loads of authentication frames made our AP
crash. The iwl_mvm_is_dup() function couldn't find the per-queue
dup_data which was not allocated.
The root cause for that is that we ran out of stations in the firmware
and we didn't really add the station to the firmware, yet we didn't
return an error to mac80211.
Mac80211 was thinking that we have the station and because of that,
sta_info::uploaded was set to 1. This allowed
ieee80211_find_sta_by_ifaddr() to return a valid station object, but
that ieee80211_sta didn't have any iwl_mvm_sta object initialized and
that caused the crash mentioned earlier when we got Rx on that station.
Cc: stable@vger.kernel.org
Fixes: 57974a55d9 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.1f76c44b2486.I6a00955e2842f15f0a089db2f834adb9d10fbe35@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code walking trip points in iwl_mvm_send_temp_report_ths_cmd()
reads the trip table passed to thermal_zone_device_register_with_trips()
in order to get the current trip temperatures, but this is not
guaranteed to work in the future, because the thermal zone will store
trip points information internally.
For this reason, make iwl_mvm_send_temp_report_ths_cmd() use
for_each_thermal_trip() as appropriate for walking trip points in a
given thermal zone.
No intentional functional impact, but it is requisite for future thermal
core improvements.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Miri Korenblit <Miriam.rachel.korenblit@intel.com>
The trip table in iwl_mvm_thermal_zone_register() is populated after
passing it to thermal_zone_device_register_with_trips(), so it may be
accessed (for instance, via sysfs) before it is ready.
To prevent that from happening, modify the function to populate the
trip table before calling thermal_zone_device_register_with_trips().
Also make the code use THERMAL_TEMP_INVALID as the "invalid temperature"
value which is also meaningful for the core.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Miri Korenblit <Miriam.rachel.korenblit@intel.com>
The fw_trips_index[] array in struct iwl_mvm_thermal_device is only
populated, but never read, so drop it.
Note that the iwl_mvm_send_temp_report_ths_cmd() code populating
fw_trips_index[] is questionable, because it accesses a trips table
of a thermal zone directly, which is not guaranteed to work in the
future.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Miri Korenblit <Miriam.rachel.korenblit@intel.com>
This is an error path and Smatch complains that "tbl_rev" is uninitialized
on this path. All the other functions follow this same patter where they
set the error code and goto out_free so that's probably what was intended
here as well.
Fixes: e8e10a37c5 ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/09900c01-6540-4a32-9451-563da0029cb6@moroto.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This saves the error as PTR_ERR(wifi_pkg). The problem is that
"wifi_pkg" is a valid pointer, not an error pointer. Set the error code
to -EINVAL instead.
Fixes: 2a8084147b ("iwlwifi: acpi: support reading and storing WRDS revision 1 and 2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/9620bb77-2d7c-4d76-b255-ad824ebf8e35@moroto.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Before sending a SESSION PROTECTION cmd the driver checks if
the link_id indicated in the time event (and for which the cmd will be
sent) is valid and exists.
Clear the te_data::link_id when FW notifies that a session protection
ended, so the check will actually fail when it should.
Fixes: 1350658373 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.c64a6b3606c2.I35cdc08e8a3be282563163690f8ca3edb51a3854@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As described in IEEE sta 802.11-2020, table 9-30 (Address
field contents), A-MSDU address 3 should contain the BSSID
address.
In TX_CMD we copy the MAC header from skb, and skb address 3
holds the destination address, but it may not be identical to
the BSSID.
Using the wrong destination address appears to work with (most)
receivers without MLO, but in MLO some devices are checking for
it carefully, perhaps as a consequence of link to MLD address
translation.
Replace address 3 in the TX_CMD MAC header with the correct
address while retaining the skb address 3 unchanged.
This ensures that skb address 3 will be utilized later for
constructing the A-MSDU subframes.
Note that we fill in the MLD address, but the firmware will do the
necessary translation to link address after encryption.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.4583a1bf9188.I3f8e7892bdf8f86b4daa28453771a8c9817b2416@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.
Unfortunately, with EHT this is longer be sufficient, at
least not for all hardware. EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA that specify the position
and bandwidth for the non-AP STA relative to the channel
the AP is using. Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over two channel contexts where they
differ by the AP being used.
As a first step, introduce a concept of a channel request
('chanreq') for each interface, to control the context it
requests. This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.
Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are still surprisingly many non-chanctx drivers, but in
mac80211 that code is a bit awkward. Simplify this by having
those drivers assign 'emulated' ops, so that the mac80211 code
can be more unified between non-chanctx/chanctx drivers. This
cuts the number of places caring about it by about 15, which
are scattered across - now they're fewer and no longer in the
channel context handling.
Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some changes coming to wireless-next that will
otherwise cause conflicts, pull wireless in first to be
able to resolve that when applying the individual changes
rather than having to do merge resolution later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
dmi_get_system_info() will statically return NULL when the
kernel is compiled without CONFIG_DMI, leading to compiler
warnings. Fix that by printing "<unknown>" in that case.
Fixes: c3f40c3e02 ("iwlwifi: mvm: add US/CA to TAS block list if OEM isn't allowed")
Fixes: 9457077df4 ("wifi: iwlwifi: mvm: Add debugfs to get TAS status")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the system is compiled without CONFIG_DMI, the function
here statically returns NULL, leading to a compiler warning.
Catch that and print "<unknown>" in that case.
While at it, fix some indentation in the function.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402030641.zUTuACYV-lkp@intel.com/
Fixes: 09059c6764 ("wifi: iwlwifi: prepare for reading PPAG table from UEFI")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The user of this function passes a pointer to a value that
doesn't exist when compiled w/o CONFIG_ACPI. Since we don't
need the value then, make the non-ACPI version a macro to
allow it to still build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402031454.syX4cSGN-lkp@intel.com/
Fixes: c4c9545477 ("wifi: iwlwifi: implement WPFC ACPI table loading")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the following patch, iwl_mvm_roc_duration_and_delay and
iwl_mvm_roc_add_cmd will be called also from time-event.c.
Move then there (where they more belong) and make then
public.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240201155157.3edafc4d59aa.Ic68e90758bcad9ae00e0aa602101842dac60e1a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
AX210 and above have this logic offloaded in the firmware and it just
ignores the command coming from the driver.
Stop sending it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240201155157.4e3e0b52f98b.I7e9481050921d95c38f5a21ccc47112b3698e859@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For each DSM function, try to first read it from the UEFI.
If the UEFI WIFI GUID is unclocked, or the DSM function in
UEFI is invalid/unavailable - read it from ACPI.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.27dd626ce2bd.Ib90bab74a9d56deb2362edb712294360e4ddae5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move all the common items (functions, enumerations and mcaros)
to regulatory.h/c files, and rename it to a common name.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.eae9bcbc0023.If1175f3143d6369076669ddd5d6ad4df0ee00659@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As DSMs are going to be read from UEFI too, we need a unified API
to get DSMs for both ACPI and UEFI.
The difference in getting DSM in each one of these methods (ACPI, UEFI)
is in the GUID, revision (0 for ACPI, 4 for UEFI), and size of the DSM
values (8 or 32 for ACPI, 32 for UEFI).
Therefore, change the iwl_acpi_get_dsm_x() to iwl_acpi_get_dsm() which
determines the GUID, revision (these two are the same for all WiFi DSMs),
and size (based on a func-to-size mapping) internally.
While at it, fix DSM_FUNC_RFI_CONFIG to expect a 32-bit value
(as defined in Intel BIOS spec) and not a 8-bit one.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.1bcd7072a7a5.I344ee0a11abbc27da0c693187d1b8bee653aaeef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These functions shouldn't be ACPI_CONFIG dependent, as they don't
access the ACPI. The functions that really access ACPI -
already handle the case that CONFIG_ACPI is not set.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.1412e6d561f8.I84f67478d01b576457e1bf489fbcb044adfda6fe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the ECKV table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI.
Change iwl_acpi_get_eckv() to receive fwrt as argument so
it will be the same as all iwl_acpi_get_x() functions,
so it could be generated by the macro.
While at it - move the reading of ECKV to INIT stage. There is no
reason to read it each time we load the FW.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.d4937cc00727.I36e5fc7f7850229b9b377c80b5203aa47137c97c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the WRDD table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI.
Change iwl_acpi_get_mcc() to receive fwrt as argument so
it will be the same as all iwl_acpi_get_x() functions,
so it could be generated by the macro.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.5d52eeb109f7.I4d81700a7ae7fe2dfee14e363de358be59de7823@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Set fast balance scan in case of active P2P GO, regardless of the
BSS DTIM interval.
This will increase the chances of scheduler to successfully schedule
out-of-channel events.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240201155157.310a00388e11.Ib136140dffa8704e68ff14e8fb69d35b97057171@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
New tx devices may have issues sending NDPs from the host.
Send a CQM event instead. If the AP is really gone, we will get a beacon
loss and disconnect.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Berg, Johannes <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240201155157.e95d53448e94.I0ec92f1ca56a62cd8c13390b9fe60e9a7e9411c7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the SPLC table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.3d9d835b6edb.I7ea262df9431ced787b77c87149c6d7bddb7e7d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As the iwl_bios_get_x() functions are now generated using a macro,
and this macro requires the all iwl_acpi_get_x() to have the same
prototype, change iwl_acpi_get_pwr_limit() to return a int
and the actuall power limit will be filled in a pointer function
parameter.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.4cce81198afe.Ice8b1b97a68da9ec7b5a4799ddb668642198e1af@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 does not have proper support for EPCS currently as that would
require changing the ECDA parameters if EPCS (Emergency Preparedness
Communications Service) is in use. As such, do not announce support for
it in the capabilities.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240201155157.59d71656addc.Idde91b3018239c49fc6ed231b411d05354fb9fb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the driver exits eSR by calling
iwl_mvm_esr_mode_inactive() before updating the FW
(by deactivating one of the links), and therefore before
sending the EML frame notifying that we are no longer in eSR.
This is wrong for several reasons:
1. The driver sends SMPS activation frames when we are still in eSR
and SMPS should be disabled when in eSR
2. The driver restores RLC configuration as it was before eSR
entering, and RLC command shouldn't be sent in eSR
Fix this by calling iwl_mvm_esr_mode_inactive() after FW update
Fixes: 12bacfc2c0 ("wifi: iwlwifi: handle eSR transitions")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.d8d9dc277d4e.Ib5aee0fd05e35b1da7f18753eb3c8fa0a3f872f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the WTAS table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.45e6ff7b5063.Id3aec70887e14533b10d564f32c0cf5f2a14b792@changeid
[move uefi_tables_lock_status outside ifdef to fix build errors]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the TAS 'read-from-BIOS' flow receives the command struct
and the version of it as read from FW TLVs, and fills the command
accordingly.
This seems wrong, we should have the 'read-from-BIOS' flow
(iwl_acpi_get_tas in iwlwifi) reading/parsing/validating the table from
BIOS, and the 'send-to-FW' flow (iwl_mvm_tas_init) doing
all the FW versioning checks and cmd filling.
Move the cmd filling to the 'send-to-fw' flow.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.24df27772a71.I57b702af4feb3f38dc21d52593c25de4b1999e4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We are going to support reading BIOS tables from UEFI
too, Refactor the TAS table flow:
1. Rename and move the common code to the regulatory.h/c files.
2. Remove the IWL_TAS_BLOCK_LIST_MAX, as we can use IWL_WTAS_BLACK_LIST_MAX
instead.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.0c2197cf1feb.Ib0e83d5bd3f4d5cfa9c3d2925317ba49377d257f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the PPAG table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.6516da09aec1.I0dcaf0b6d8857417ba1318467a28da5d0d7d7f27@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We used to check enablement/validity of the PPAG table while reading
it from BIOS.
For newer FWs this checks were offloaded, and the driver needs
to send the PPAG table anyway.
The desicion whether the table needs to be validated before sending it
is FW related and shouln't be in 'read-from-bios' flow.
Move it to 'send-to-fw' flow instead.
This will also help to avoid code duplication of checking validity in
both ACPI and UEFI caes.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.7043b4087dda.I5a189f9a349556b84a79597fe1e46ffa93664df9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As PPAG table is going to be read from UEFI, there are some
cleanups required:
Move functions/definitions that are common to both UEFI and ACPI to
regulatory.h/c.
In addition, rename the functions/macros names so it will be clear which
one is ACPI specific, and which is common for ACPI and UEFI.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.25623670b422.I8132af7517e4faf0ea8cbeb2efe9651edd319b98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1. The name of iwl_read_ppag_table is misleading, as this function only
fills the command structure from the previously read table. Rename it.
2. Don't initialize fwrt::ppag_flags to 0 as the entire fwrt is zeroed
in the INIT stage anyway.
3. Don't filter out the reserved bits from fwrt::ppag_flags when printing
it, as it is already done in 'read-from-bios' flow.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.48acf340e817.I810e457b80015c1931d96d3e13c849f0339723c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the regulatory tables will be read from UEFI, and
only if it doesn't exist - they will be read from ACPI.
Read SAR tables (WRDS, EWRD and WGDS) from UEFI.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.533b687e1efb.Icb316291e593c8d53f41fdea2d083367dc97e3c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_geo_tx_power_profiles_cmd::table_revision indicates whether
to use South Korea scheme or not.
We use South Korea scheme if the revision of WGDS table is 1.
We used to read the WGDS table from ACPI inside iwl_sar_geo_fill_table(),
so we had to set table_revision only after the call to it.
This added an extra if...else for each cmd version.
But it has been a while since we moved the BIOS tables reading to
INIT stage, and iwl_sar_geo_fill_table() is now only copying the
previously stored table to the cmd structure.
Set the table_revision before the call to iwl_sar_geo_fill_table()
and avoid that extra if...else.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.17a2384d4535.I306570874f1da0c6345066ebbf74a04b6c8aeb37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver will support reading BIOS tables from UEFI
too. Refactor the SAR tables (WRDS, EWRD, WGDS) flows:
1. Move all the SAR logic/definitions that is common to both
UEFI and ACPI to a new file - regulatory.h/c.
2. Rename the relevant functions/definitions
so it will be clear which is ACPI specific and which is
for both ACPI and UEFI
3. Rename the function that copies the stored tables into the different
commands structures, so will be clear what these functions do.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.429a9baff34a.I040460348aa1b43609be3a317b86722d6be71c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Before using EMLSR check the AP actually advertises
support for it, otherwise reject the link activation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240131091413.edaac352488d.Ic3533afc6848591e8977391ae39c144d5e794d26@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When using MLO, we need to have only a single link active
when entering suspend and of course most of the code also
needs to be adjusted to not use deflink, apart from older
code that's not used with MLO-capable firmware. Implement
that.
Note that the link selection currently prefers the "best"
link, which might really not be the best for D3, but that
can be fixed later once we agree.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240131091413.38f0fd4d2db0.I27c7a1d08aecc5da0af2c351212f22e92ed70219@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver is supposed to read the PNVM from BIOS only for non-Intel
SKUs. For Intel SKUs the OEM ID will be 0.
Read BIOS PNVM only when a non-Intel SKU is indicated.
Fixes: b99e32cbfd ("wifi: iwlwifi: Take loading and setting of pnvm image out of parsing part")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.3625cf1223d3.Ieffda5f506713b1c979388dd7a0e1c1a0145cfca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the check for using a chanctx's def vs. min_def,
to have the same in both places and reuse it later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.6fcde4051adf.I343934874612d21727ed167accaa967958b2c25b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we drop frames due to MIC error we want to have something
printed in the logger (this won't be printed by default).
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.41b0abbf1fd2.Ib6ec6a48ec7bebe769d1e1c1df96380a758a0975@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the firmware has the necessary support, enable SPP A-MSDUs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.15e4570e471f.I87cf284d3b19bb9f5558f0f33afaace6d6492acb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ADD_STA resets the link quality data inside the firmware. This is not
supposed to happen and has been fixed for newer devices. For older
devices (AX201 and down), this makes us send frames with rates that are
not in the TLC table.
Fixes: 5a86dcb4a9 ("wifi: iwlwifi: mvm: update station's MFP flag after association")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.1deca7eaff14.I597abd7aab36fdab4aa8311a48c98a3d5bd433ba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With MLO connections we need to let the firmware pick the rate
as we don't know the link the frame might be transmitted on
(in some cases we do know, but we'd rather always use the FW
and find bugs.) We _did_ end up finding bugs and fixing them,
but older devices likely won't get fixed as we don't have a
need for this there, they cannot support MLO.
Thus, go back to picking a rate on the host for the relevant
frames on older (pre-Bz) devices.
Fixes: 499d027904 ("wifi: iwlwifi: Use FW rate for non-data frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.e59056d0a8cc.Iccc4c5c1753921d3d85241ede812a150fb05b898@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The IWL_DEVICE_GL_A macro is no longer used, and couldn't
be, so remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.8929a06c3a55.I3c21305e4b7fa3aba938bc860269e848fe262e88@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When secure LTF is used MFP must also be set.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.6cad71069e87.I7f9fd5239cfd2244f155f88419980e6e91d00ff2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We check this in code that'd be complicated to put under
ifdef (CONFIG_ACPI), so just always have 'uats_enabled'.
Fixes: 4a9bb5b4d9 ("wifi: iwlwifi: fw: Add support for UATS table in UHB")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.bdc5fb20f00a.I902d801d79873c5c9cd51cef8e8226e2acefe88d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This field is reserved in AP mode, don't set any bits in it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.f5eeb717212e.I60fa4843a8634922281580b925db2c2699e3a7bc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a spelling mistake in a WARN message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.ff31e9385d29.I3a224e6a9294fdec431919fb4ec9315801e77454@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The IPN is reported by the firmware in 6 bytes little endian,
but mac80211 expects big endian so it can do memcmp() on it.
We used to store this as a u64 which was filled in the right
way, but never used. When implementing that it's used, we
changed it to just be 6 bytes, but lost the conversion. Add
it back.
Fixes: 04f78e242f ("wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.138ed8a698e3.I1b66c386e45b5392696424ec636474bff86fd5ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for handling TID to link mapping negotiation
request and decide whether to accept it or not.
Accept the request if all TIDs are mapped to the same link set,
otherwise reject it.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.aab9819c378d.Icf6b79a362763e2e8b85959471f303b586617242@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EWRD ACPI table contains up to 3 additional sar profiles.
According to the BIOS spec, the table contains a n_profile
variable indicating how many additional profiles exist in the
table.
Currently we check that n_profiles is not <= 0.
But according to the BIOS spec, 0 is a valid value,
and it can't be < 0 anyway because we receive that from ACPI as
an unsigned integer.
Fixes: 39c1a9728f ("iwlwifi: refactor the SAR tables from mvm to acpi")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240129211905.448ea2f40814.Iffd2aadf8e8693e6cb599bee0406a800a0c1e081@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the regulatory tables from BIOS are going to be loaded
(preferably) from the UEFI instead of the ACPI.
There is a security issue with the fact that anyone can
add these UEFI variables.
The solution for that is to have a lock for all WIFI GUID UEFI
variables, and only if the UEFI variables are locked then we can
read it.
The status of the lock (unlocked, locked, test mode) is indicated
in a ACPI table: Guid Lock ACPI Indicator.
Load this table so the driver knows whether to read from UEFI or
not
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240128084842.53994809fbdd.I1bd10aafc387bc04f375e386861ee2bcb82f0a61@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When connecting to an AP, we currently initialize the rate
control only after associating. Since we now use firmware
to assign rates to auth/assoc frames rather than using the
data in the station and the firmware doesn't know, they're
transmitted using low mandatory rates. However, if the AP
advertised only higher supported rates we want to use them
to be nicer (it still must receive mandatory rates though),
so send the information to the firmware earlier to have it
know about it and be able to use it.
Fixes: 499d027904 ("wifi: iwlwifi: Use FW rate for non-data frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.ed7ab1c859c2.I4b4d4fc3905c8d8470fc0fee4648f25c950c9bb7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will allow to reconnect immediately instead of leaving the
connection in a limbo state.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.e90531cd3a36.Iebdc9483983c0d8497f9dcf9d79ec37332a5fdcc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code reading the WPFC table needs to take into account
the domain type (first element in the package), shouldn't
leak the memory if it fails, and has a bad comment. Fix all
these issues.
Fixes: c4c9545477 ("wifi: iwlwifi: implement WPFC ACPI table loading")
Reported-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman Gregory <gregory.greenman@intel.com>
Link: https://msgid.link/20240128084842.2afeb476b62d.I200568dc42a277e21c12be99d5aaa39b009d45da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This hard-codes the size, but it's not obvious why that's
correct. Use sizeof() and cross-check the two structs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.58fcdea2ace7.I49cb1d7bdbea12085aada0c96ef42fcbcb3d2b38@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_fw_ini_debug_info_tlv is used as a string, so we must
ensure the string is terminated correctly before using it.
Fixes: a9248de424 ("iwlwifi: dbg_ini: add TLV allocation new API support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.be15e858ee89.Ibff93429cf999eafc7b26f3eef4c055dc84984a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is effectively the same since we don't even have a
multiplication, but better captures what happens with
the length.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.f301641eb916.I66b7b48a526377d682eecef874373bf3a01076c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In iwl_dbg_tlv_alloc_trigger() the code makes a copy just
to modify it and pass it to another function to make a copy
again. Change the API to return the copy so the adjustment
can be done without another copy.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.075c8b9f7030.Id5a61e1a87a9c6932727fb4e2c9b54ed6070362a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there was a rekey failure during D3 when firmware is
handling the GTK rekeying, and it decided that we should
wake up, then there was an issue in the connection and
we don't necessarily have the right keys, so we should
disconnect.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.944af193d479.I5ef9f1f0e048d44d7158615d071b793d69eceb75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Andrei reports that we just silently drop beacons after we
report the key counters, but never report to userspace, so
wpa_supplicant cannot send the WNM action frame. Fix that.
Fixes: b1fdc2505a ("iwlwifi: mvm: advertise BIGTK client support if available")
Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240128084842.7d855442cdce.Iba90b26f893dc8c49bfb8be65373cd0a138af12c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When removing a PASN station, the TK must be removed before
the station is removed as otherwise the FW would assert.
To handle this, store the key configuration, and use it to remove
the key when the station is removed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240131230734.3e6364730c04.Ia76dc4a9d399f1f68ac6b157d844b63f74d5159f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
eSR should be disabled when BT Coex is active and:
- LB link is the primary link.
- LB link is the secondary link and the predicted BT penalty
(the wifi loss rate caused by BT interference) is higher
than a given threshold.
If one of the conditions above is no longer true then re-enable eSR.
In order to implement this, add support for version 5 of
BT_PROFILE_NOTIFICATION, in which the bt penalty is provided
by FW.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131225342.b922b6485af8.I7d808ce535a7372aca9cb85c045755e6788a4904@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function to add an interface may be called without a previous
removal if the HW is being reconfigured. As such, only add the symlink
if the hardware is not being reconfigured due to a HW_RESTART.
Fixes: c36235acb3 ("wifi: iwlwifi: mvm: rework debugfs handling")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.314395eacda4.I5823e962c3c3674b942383733debd10b3fe903e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The storage for the TLV PC register data wasn't done like all
the other storage in the drv->fw area, which is cleared at the
end of deallocation. Therefore, the freeing must also be done
differently, explicitly NULL'ing it out after the free, since
otherwise there's a nasty double-free bug here if a file fails
to load after this has been parsed, and we get another free
later (e.g. because no other file exists.) Fix that by adding
the missing NULL assignment.
Cc: stable@vger.kernel.org
Fixes: 5e31b3df86 ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred")
Reported-by: Guy Kaplan <guy.kaplan@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.675f3c24ec0d.I6ab4015cd78d82dd95471f840629972ef0331de3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The wiphy_work infra ensures that the entire worker will run
with the wiphy mutex. It is useful to have RX handlers
running as a wiphy_work, when we don't want the handler to
run in parallel with mac80211 work (to avoid races).
For example - BT notification can disable eSR starting from the next
patch.
In ieee80211_set_active_links we first check that eSR is
allowed, (drv_can_activate_links) and then activate it.
If the BT notif was received after drv_can_activate_links
(which returned true), and before the activation - eSR will be
activated when it shouldn't.
If BT notif is handled with the wiphy mutex, it can't run in
parallel to ieee80211_set_active_links, which also holds that
mutex.
Add the necessary infrastructure here, for use in the next commit.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240123200528.ce83d16cdec8.I35ef53fa23f58b9ec17924099238b61deafcecd7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This callback checks if a given bitmap of active_links
will be supported by the driver or not.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240123200528.a26fd48bfe3d.I03ae6b4c7fd24e8701660a68cec9403dc3469a0e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This command version adds two news fields:
sbb_bandwidth and sbb_ctrl_channel_loc
They will be populated later.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.82ab4140fff9.Icfba4819fe0b7ac8219ab671c632e25f5fbbaf6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Without SMP the function is just a stub that returns an error code. Add
a compile time check for CONFIG_SMP in the interest of not logging an
error if setting affinity is not possible anyway.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.ed9094390731.Ic4e5e019c01fd4231b99cf4919af5d19d6353869@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We should - at least for now - advertise common nominal packet
padding of 16µs instead of the more specific PPE thresholds.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.4312e176dfdc.Ide75980ff57257a31e86e6ac5948a8f97aaab577@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link ID in time event data is -1 when the time event is cleared.
Change the type of the link ID in the time event data structure
and in the affected function from unsigned to signed.
Fixes: 1350658373 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240123200528.50d4941f946c.Iea990b118c69bc3e1eb61c1d134c9d470b3a17ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's either the pldr_sync case, in which case we didn't want
or do the retry loops anyway, or things will just continue to
fail. Remove the retry loop that was added in a previous attempt
to address the issue that was later (though still a bit broken)
addressed by the pldr_sync case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.f80a88a18799.I48f21eda090f4cc675f40e99eef69a986d21b500@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the STEP (the interface between MAC and PHY) is in URM
(a lower speed mode) then we cannot use 320 MHz MCS > 9.
Therefore, limit the MCS in our capabilities in this case.
Note that this also limits the TX/rate scaling since that
takes both TX and RX capabilities into account.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.02bae683b7fc.Id5efbb71d45da02c8c4e211d20396637ddd44da8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver should not send 160 MHz BW support for 5 GHz
band in HE if PCI subsystem device ID indicates no 160 MHz support.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240126085924.77c248ce6986.I558e8d0cf19dc862b1c4124df78a4cb690095bb2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to print this, it's a known issue and
the workaround works just fine. Make the reallocation
message just a debug message.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.329d5f2ee7f7.I0bfc6dde17fe2c738129f3aba746c6cba57589f9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the new 802.11be device with limites capabilities:
- 320 MHz isn't supported
- MCSs 12 and 13 are not supported
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.8529bd2acedf.I25dccb7bbeb21b8df2123fad51dde7fcf137a508@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We used to have a test built into the code for this internally,
but now we can put that into kunit and let everyone run it, to
verify the devinfo table ordering if it's changed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.a4a8af7c091f.I0fb09083317b331168b99b8db39656a126a5cc4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first "new features" pull request for v6.9. We have only driver
changes this time and most of them are for Realtek drivers. Really
nice to see activity in Broadcom drivers again.
Major changes:
rtwl8xxxu
* RTL8188F: concurrent interface support
* Channel Switch Announcement (CSA) support in AP mode
brcmfmac
* per-vendor feature support
* per-vendor SAE password setup
rtlwifi
* speed up USB firmware initialisation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmWyOigRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt2OAf8DG1/4j+iBanejbVb1IVYklIG1lt6L092
kwnBZO+I0TAF9u5LGr91kyuZJ/2AQUi8awcE4364D54tTVAqDSl/ZwdiTbYZdemq
/JiJeNYuVTaJ5wu0Kk5jdMMdCgwV570JLcEXcf+jvxZj7HGz8HeT5MH19nLN7O+Z
irbfSldYeL5b/f+4UUlgZsa87tZ/E/LOEK28Vf6tWRLXZOdyUCXsKS1z6UOr4pFb
d1QKenu/wYoc0hHbWcwa3G8zmIm7IdtpIWePPF3j8Gj7WntDVtY49llP7A4m3WnG
/u5iPAj/xwkLiCADLBwKYkWC1yREQ0EGlv9gcocfF50METB4OGH7YQ==
=CgVA
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The first "new features" pull request for v6.9. We have only driver
changes this time and most of them are for Realtek drivers. Really
nice to see activity in Broadcom drivers again.
Major changes:
rtwl8xxxu
* RTL8188F: concurrent interface support
* Channel Switch Announcement (CSA) support in AP mode
brcmfmac
* per-vendor feature support
* per-vendor SAE password setup
rtlwifi
* speed up USB firmware initialisation
* tag 'wireless-next-2024-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits)
wifi: iwlegacy: Use kcalloc() instead of kzalloc()
wifi: rtw89: fix disabling concurrent mode TX hang issue
wifi: rtw89: fix HW scan timeout due to TSF sync issue
wifi: rtw89: add wait/completion for abort scan
wifi: rtw89: fix null pointer access when abort scan
wifi: rtw89: disable RTS when broadcast/multicast
wifi: rtw89: Set default CQM config if not present
wifi: rtw89: refine hardware scan C2H events
wifi: rtw89: refine add_chan H2C command to encode_bits
wifi: rtw89: 8922a: add BTG functions to assist BT coexistence to control TX/RX
wifi: rtw89: 8922a: add TX power related ops
wifi: rtw89: 8922a: add register definitions of H2C, C2H, page, RRSR and EDCCA
wifi: rtw89: 8922a: add chip_ops related to BB init
wifi: rtw89: 8922a: add chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add mlo_dbcc_mode for WiFi 7 chips
wifi: rtlwifi: Speed up firmware loading for USB
wifi: rtl8xxxu: add missing number of sec cam entries for all variants
wifi: brcmfmac: allow per-vendor event handling
wifi: brcmfmac: avoid invalid list operation when vendor attach fails
wifi: brcmfmac: Demote vendor-specific attach/detach messages to info
...
====================
Link: https://lore.kernel.org/r/20240125104030.B6CA6C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The most visible fix here is the ath11k crash fix which was introduced
in v6.7. We also have a fix for iwlwifi memory corruption and few
smaller fixes in the stack.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmWuipMRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt17wgAhrkxpwRpMuRrV6VxHl9m+NXk7is2vni2
JZbqlvMIw1Hm+40K9D0WgFdNZUeAtBcd567MAbiqdzqRNB9DtEvnsXIKlKINwxIA
QFskkXR1f0sj79Hz3q7iWQq+jxDvAU5tge/WU65Na7+224sdyzBg7DZab8/buOsm
1xdx69MtGNU+dm4+V1Xp8h9jB7WAjq7N+ZhC6YfH6QSCL7JSL9Co/NC098gBnAEx
cm59vPOxk8+QoHKDjjmClTIhxOEgR6pSM8T3Dne9OYO8ONhxqdVSgd0Br+mEZgQ4
r61i88zK6ZmVZYckk6fhuGCLiKC6CFwS0eCLDQnKK1ufyRxDi84Y/Q==
=Cwmf
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.8-rc2
The most visible fix here is the ath11k crash fix which was introduced
in v6.7. We also have a fix for iwlwifi memory corruption and few
smaller fixes in the stack.
* tag 'wireless-2024-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix race condition on enabling fast-xmit
wifi: iwlwifi: fix a memory corruption
wifi: mac80211: fix potential sta-link leak
wifi: cfg80211/mac80211: remove dependency on non-existing option
wifi: cfg80211: fix missing interfaces when dumping
wifi: ath11k: rely on mac80211 debugfs handling for vif
wifi: p54: fix GCC format truncation warning with wiphy->fw_version
====================
Link: https://lore.kernel.org/r/20240122153434.E0254C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Also, it is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not change the
former (unlike the latter).
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240119171655.7740-1-erick.archer@gmx.com
The third "new features" pull request for v6.8. This is a smaller one
to clear up our tree before the break and nothing really noteworthy
this time.
Major changes:
stack
* cfg80211: introduce cfg80211_ssid_eq() for SSID matching
* cfg80211: support P2P operation on DFS channels
* mac80211: allow 64-bit radiotap timestamps
iwlwifi
* AX210: allow concurrent P2P operation on DFS channels
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmWFbnIRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZs5hQf/aCvvTjqeRoMkmO+ZPFMSO+YquZNCJi1M
TP8Fce2ALKj7woPad8vdJNNStMa9k4bu2NvShMXhoYM3xOA/4o0P9yeb5OfyYkTk
Y6JF+SoBGzABtB3m/a3i5J19F+oC+6yKN6/OY8byfK4jqZdrAprc3qXwodC5zb9n
blC16KKlldjoj5AWe/b6Vn/LI9P7mVhZIaWxI9IaktK0eIgfsfcgIZLuuMJPq5DJ
NjvhmK++qCcTQrJo/4TMVoWmcZZKR3XzcSs++HYRELNCwcM2q9s07R4KkV81aB0t
RpCaCWa2KVUCrKdk3FlnG5pS7A6US5KGP4g6sSQRnq8t3IYDUbDo5Q==
=Bte8
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The third "new features" pull request for v6.8. This is a smaller one
to clear up our tree before the break and nothing really noteworthy
this time.
Major changes:
stack
* cfg80211: introduce cfg80211_ssid_eq() for SSID matching
* cfg80211: support P2P operation on DFS channels
* mac80211: allow 64-bit radiotap timestamps
iwlwifi
* AX210: allow concurrent P2P operation on DFS channels
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ENOTSUPP isn't a standard error code, don't use it. Replace with
EOPNOTSUPP instead.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.a69f4347b5f8.I88429d5de8251287ec0b58ff26a588465b9049a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware can allow to clear the internal debug buffer. This can be
used to sanitize the data when requested to.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.99aed3efbacb.Ib5bda1d1ff4bae476667737d4081ad066d1d7e6b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For now, this isn't allowed. The API to mac80211 isn't great
for this, but we need to change the API to move puncturing
into the chanctx/chandef, and will do it better then.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.38955b68b429.I0c4ae99179b271648a747a51eb04853504c7952c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't want to duplicate the definitions later,
so add them to the API.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.6595e905997b.I12354d31676911b29ab30c81a4e9b87f59284d3b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the CSR register details for new wifi7 devices and
correctly set rf_name for devices with FM and WP radios.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.a9c04b1e9d13.Ibf258d5e6370d8840a2560282988a1c26377c410@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
eSR is activated when a chanctx is assigned to more than one link.
During eSR activation we should disable RLC for both phys, and configure
the FW with a special phy command for both phys.
Currently we assign the phy_ctxt to the link only after eSR activation,
so RLC is not disabled for the new phy_ctxt, and a cmd is not sent to FW.
Fix this by first assigning the new phy_ctxt to the link and then
doing the eSR activation.
Fixes: 12bacfc2c0 ("wifi: iwlwifi: handle eSR transitions")
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.3d94507f5d9a.I537fcd73aedf94c7348c03157e486f24301fef14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver copies the userspace buffer into an internal NUL
byte terminated buffer. While doing so, it was reading beyond
the end of the userspace buffer, overwriting its own NUL
termination in the process.
Fix this by only copying the correct number of bytes.
Fixes: 3f244876ef ("wifi: iwlwifi: make debugfs entries link specific")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.e4913deb2ad4.Idcf6a7e909ff4b7801cd49c2f691f84a2f68eff9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is possible that though multiple links are enabled we cannot enabled
EMLSR enable more than a single link, e.g., all valid links are on the
same band etc. Thus, do not warn in case no valid link pair is found.
Fixes: b9be67fb42 ("wifi: iwlwifi: mvm: Add basic link selection logic")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.142e57a05230.I7cfe78c94c3d15c4c744bccadd8f187e43594932@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now with the mac80211 locking model changed, we no longer can
cause any bad dependencies here between mvm->mutex and other
mutexes in mac80211, so we no longer need to drop the mutex
early or even temporarily. Clean this up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.1f2f5289ecc6.I7e3b8e806b6d50e88ba0c26767da8261806eb9c7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we want to drop packets, that's surely a good thing to
do when we want to enter rfkill. Send this command despite
rfkill so we can successfully clean up everything, we need
to handle it separately since it has CMD_WANT_SKB, so it's
not going to automatically return success when in rfkill.
Fixes: d4e3a341b8 ("iwlwifi: mvm: add support for new flush queue response")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.c528a6fa6cec.Ibe5e9560359ccc0fba60c35e01de285c376748a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The NVM_CHANNEL_ACTIVE bit means that active scanning/beaconing is
allowed, however it's not an exact opposite of IEEE80211_CHAN_NO_IR.
For example, NVM_CHANNEL_ACTIVE bit is not set on DFS channels, while
cfg80211 doesn't really expect NO-IR on DFS channels.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.94cd9b96a532.Ifb0e8d8a6a6384493758f26b811d58432536101a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware changed their mind, don't set the chains to zero,
instead set them to 1 as we normally would for connections to
APs that don't use MIMO.
Fixes: 2a7ce54ccc ("iwlwifi: mvm: honour firmware SMPS requests")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.7f031f1a127f.Idc816e0f604b07d22a9d5352bc23c445512fad14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.
Major changes:
cfg80211/mac80211
* AMD ACPI based Wifi band RFI (WBRF) mitigation feature
* Basic Service Set (BSS) usage reporting
* TID to link mapping support
* mac80211 hardware flag to disallow puncturing
iwlwifi
* new debugfs file fw_dbg_clear
mt76
* NVMEM EEPROM improvements
* mt7996 Extremely High Throughpu (EHT) improvements
* mt7996 Wireless Ethernet Dispatcher (WED) support
* mt7996 36-bit DMA support
ath12k
* support one MSI vector
* WCN7850: support AP mode
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmWAdRERHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu0RAf+JtHgfjmUMFb54xcncLgj8ZAN82E0ThE0
bPewQDhot0QTri4s7i5Kn8PCWjk+eKEmiIK+eARM+JDyZMTlCpXs2Y92cDAGQ8KG
+LbIMRQkwOUg0HmtX3NysUG3mGAx4QTcIX/y3+GmtMZpKXMFuNy6ODuFvuWFNJrF
3XTq1qFQNnA0XqUDKHW9uareeCiOMVOsqcxNW2FAi2gqRUfQpKnU1Ukv5iOjkqE9
i53GHzeAG2WI4/YjXaTEZvibkM3jqrPcquHlul3fVuq05qkKOEuiy2UalDjgDCYp
u91vbmMpcOjhlf9GIiu2BF6K/muEUCCIjlh5oxob0k9NiKhnPUZLng==
=6Y8M
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.
Major changes:
cfg80211/mac80211
* AMD ACPI based Wifi band RFI (WBRF) mitigation feature
* Basic Service Set (BSS) usage reporting
* TID to link mapping support
* mac80211 hardware flag to disallow puncturing
iwlwifi
* new debugfs file fw_dbg_clear
mt76
* NVMEM EEPROM improvements
* mt7996 Extremely High Throughpu (EHT) improvements
* mt7996 Wireless Ethernet Dispatcher (WED) support
* mt7996 36-bit DMA support
ath12k
* support one MSI vector
* WCN7850: support AP mode
* tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings
wifi: ath11k: workaround too long expansion sparse warnings
Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ"
wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor()
wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up
wifi: rtw89: add DBCC H2C to notify firmware the status
wifi: rtw89: mac: add suffix _ax to MAC functions
wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled
wifi: rtw89: 8922a: add power on/off functions
wifi: rtw89: add XTAL SI for WiFi 7 chips
wifi: rtw89: phy: print out RFK log with formatted string
wifi: rtw89: parse and print out RFK log from C2H events
wifi: rtw89: add C2H event handlers of RFK log and report
wifi: rtw89: load RFK log format string from firmware file
wifi: rtw89: fw: add version field to BB MCU firmware element
wifi: rtw89: fw: load TX power track tables from fw_element
wifi: mwifiex: configure BSSID consistently when starting AP
wifi: mwifiex: add extra delay for firmware ready
wifi: mac80211: sta_info.c: fix sentence grammar
wifi: mac80211: rx.c: fix sentence grammar
...
====================
Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On older devices (before unified image!) we can end up calling
stop_device from an rfkill interrupt. However, in stop_device
we attempt to synchronize IRQs, which then of course deadlocks.
Avoid this by checking the context, if running from the IRQ
thread then don't synchronize. This wouldn't be correct on a
new device since RSS is supported, but older devices only have
a single interrupt/queue.
Fixes: 37fb29bd1f ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Cc: Kunwu Chan <kunwu.chan@hotmail.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231211033019.238149-1-chentao@kylinos.cn
Newest firmware has completely offloaded this logic and this command
will be deprecated soon. Based on a capability bit advertised by the
firmware, skip this command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.e64ef70c0133.I9f47cdef2ba45f1f383b70023857376973de3a8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's only one user of this code, which is STA unblock
during sleep for uAPSD on really old devices. Instead of
having this all through the API with calls up and down,
just implemented a special-case CMD_BLOCK_TXQS flag for
this, it's only needed in the old gen1 transport.
While at it, fix a complain that lockdep would have, as
we lock the cmd queue and then the TXQs in the reclaim
by using spin_lock_nested(). We no longer need to disable
BHs in iwl_trans_pcie_block_txq_ptrs() since it's called
with them disabled already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.2bd95e0570fc.I16486dbc82570d2f73a585872f5394698627310d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This causes fortify warnings when compiled against recent kernels
with recent compilers, and generally is not supported in the kernel
anymore.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.367a2c77b9be.I4964ec8ca1d30c7c3163f9873814c8205a1a14eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't access the device if we don't hold a reference,
and if - after locking - we see that it has no bus, we also
can't do anything, in fact, pci_stop_and_remove_bus_device()
will be a no-op.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.6c0879e695f7.I1d3ce75ecad32a4cbf1b9dad61bfb7bc7821fdd9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This can be used by the user space when it wants to clear the data we
collected so far for privacy reasons.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.d5e97d5ec0d9.I7a5e836e6109e1fce7e6301dba8d1f28e60a5440@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When there's not going to be any data in the data event, we
don't need to add it at all (unlike the TX version, it has
no data at all.)
Also combine the tracing into a separate inline so we only
call iwl_rx_trace_len() once, which also simplifies things,
and lets us have a single place to later add other checks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.13325a4848d2.Ic9e7d794fc4aebfe5ac5136b539ee62789f210f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EHT CQI is one of the EHT PHY capabilities. We don't support EHT CQI.
The non-triggered CQI feedback bit was unset in a previous patch,
but the triggered CQI feedback bit wasn't. Unset it.
Fixes: 0e21ec6edb ("wifi: iwlwifi: nvm: Update EHT capabilities for GL device")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.092528daf59e.I5715769490835819beddb00c91bbc9e806e170cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For an MLO connection, the BSSID of the link used during the scanning
should be used (and not the one from the default link).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.1e67dba640c1.I6c4941bfab3a04498370e58b402c64d990c39fbf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It possible that while the rx rb is being handled, the transport has
been stopped and re-started. In this case the tx queue pointer is not
yet initialized, which will lead to a NULL pointer dereference.
Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.cd0898cafd89.I0b84daae753ba9612092bf383f5c6f761446e964@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Evidently I had only looked at all the ones in rx.c, and missed this.
Add bh-disable to this use of the rxq->lock as well.
Fixes: 25edc8f259 ("iwlwifi: pcie: properly implement NAPI")
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231208183100.e79ad3dae649.I8f19713c4383707f8be7fc20ff5cc1ecf12429bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- debugfs had a deadlock (removal vs. use of files),
fixes going through wireless ACKed by Greg
- support for HT STAs on 320 MHz channels, even if it's
not clear that should ever happen (that's 6 GHz), best
not to WARN()
- fix for the previous CQM fix that broke most cases
- various wiphy locking fixes
- various small driver fixes
-----BEGIN PGP SIGNATURE-----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=X6t2
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes:
- debugfs had a deadlock (removal vs. use of files),
fixes going through wireless ACKed by Greg
- support for HT STAs on 320 MHz channels, even if it's
not clear that should ever happen (that's 6 GHz), best
not to WARN()
- fix for the previous CQM fix that broke most cases
- various wiphy locking fixes
- various small driver fixes
* tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: use wiphy locked debugfs for sdata/link
wifi: mac80211: use wiphy locked debugfs helpers for agg_status
wifi: cfg80211: add locked debugfs wrappers
debugfs: add API to allow debugfs operations cancellation
debugfs: annotate debugfs handlers vs. removal with lockdep
debugfs: fix automount d_fsdata usage
wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap
wifi: avoid offset calculation on NULL pointer
wifi: cfg80211: hold wiphy mutex for send_interface
wifi: cfg80211: lock wiphy mutex for rfkill poll
wifi: cfg80211: fix CQM for non-range use
wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush
wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()
wifi: mt76: mt7925: fix typo in mt7925_init_he_caps
wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
====================
Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
* extend support for scanning while Multi-Link Operation (MLO) connected
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmVk2JkRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtD4gf7B8eR+lq6+5Qg7ObiURTci/WYlDo3prz4
R7hDmuHI5S3AJIRXF87fmC1iThIigi6dri1akRdRo3UvNr9gBTRpDGHnALuDPxOp
p8MpsG1gPNhMo0aNFfX5RDaGkfKqZQMT3er3ELG4B+k4q0glNWud07D2/0t1zSt9
rag3vlFVPRzcCz2T/Xv/nXXWaiIaQx0RLHrQshbxg0Glu+m/l3/ACBrirMiWami4
nr4SX717yckqwRElH0l5fSmCbylTDCTslo4UnpVKusxTtt1f3RxFZvsxvRgI5O9q
LEYsMtjNj2Ea3uLb0DvSNY640O/dqbRSm0PjwYxPwlmrtQB/6GMx8g==
=a+Xs
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
- extend support for scanning while Multi-Link Operation (MLO) connected
* tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (68 commits)
wifi: nl80211: Documentation update for NL80211_CMD_PORT_AUTHORIZED event
wifi: mac80211: Extend support for scanning while MLO connected
wifi: cfg80211: Extend support for scanning while MLO connected
wifi: ieee80211: fix PV1 frame control field name
rfkill: return ENOTTY on invalid ioctl
MAINTAINERS: update iwlwifi maintainers
wifi: rtw89: 8922a: read efuse content from physical map
wifi: rtw89: 8922a: read efuse content via efuse map struct from logic map
wifi: rtw89: 8852c: read RX gain offset from efuse for 6GHz channels
wifi: rtw89: mac: add to access efuse for WiFi 7 chips
wifi: rtw89: mac: use mac_gen pointer to access about efuse
wifi: rtw89: 8922a: add 8922A basic chip info
wifi: rtlwifi: drop unused const_amdpci_aspm
wifi: mwifiex: mwifiex_process_sleep_confirm_resp(): remove unused priv variable
wifi: rtw89: regd: update regulatory map to R65-R44
wifi: rtw89: regd: handle policy of 6 GHz according to BIOS
wifi: rtw89: acpi: process 6 GHz band policy from DSM
wifi: rtlwifi: simplify rtl_action_proc() and rtl_tx_agg_start()
wifi: rtw89: pci: update interrupt mitigation register for 8922AE
wifi: rtw89: pci: correct interrupt mitigation register for 8852CE
...
====================
Link: https://lore.kernel.org/r/20231127180056.0B48DC433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
`extra` is intended to be NUL-terminated which is evident by the manual
assignment of a NUL-byte as well as its immediate usage with strlen().
Moreover, many of these getters and setters are NUL-padding buffers with
memset():
2439 | memset(&tx_power, 0, sizeof(tx_power));
9998 | memset(sys_config, 0, sizeof(struct ipw_sys_config));
10084 | memset(tfd, 0, sizeof(*tfd));
10261 | memset(&dummystats, 0, sizeof(dummystats));
... let's maintain this behavior and NUL-pad our destination buffer.
Considering the above, a suitable replacement is `strscpy_pad` due to
the fact that it guarantees both NUL-termination and NUL-padding on the
destination buffer.
To be clear, there is no bug in the current implementation as
MAX_WX_STRING is much larger than the size of the string literals being
copied from. Also, strncpy() does NUL-pad the destination buffer and
using strscpy_pad() simply matches that behavior. All in all, there
should be no functional change but we are one step closer to eliminating
usage of strncpy().
Do note that we cannot use the more idiomatic strscpy invocation of
(dest, src, sizeof(dest)) as the destination buffer cannot have its size
determined at compile time. So, let's stick with (dest, src, LEN).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231017-strncpy-drivers-net-wireless-intel-ipw2x00-ipw2200-c-v2-1-465e10dc817c@google.com
On v6.6-rc4 with GCC 13.2 I see:
drivers/net/wireless/intel/ipw2x00/ipw2100.c:5905:63: warning: '%s' directive output may be truncated writing up to 63 bytes into a region of size 32 [-Wformat-truncation=]
drivers/net/wireless/intel/ipw2x00/ipw2100.c:5905:9: note: 'snprintf' output between 4 and 140 bytes into a destination of size 32
drivers/net/wireless/intel/ipw2x00/ipw2200.c:10392:63: warning: '%s' directive output may be truncated writing up to 63 bytes into a region of size 32 [-Wformat-truncation=]
drivers/net/wireless/intel/ipw2x00/ipw2200.c:10392:9: note: 'snprintf' output between 4 and 98 bytes into a destination of size 32
Fix this by copying only the firmware version and not providing any extra
information via ethtool. This is an ancient driver anyway and most likely
removed soon so it doesn't really matter.
Compile tested only.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231012135854.3473332-2-kvalo@kernel.org
Since 'tz_device' is an in-place member of 'struct iwl_mvm', it can't
be NULL and so relevant check may be dropped. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231003092048.24998-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
By definition, this DSM func is valid only for HR/JF RF types.
Until now firmware ignored this bit (if set) on other than the
above types, but in future firmware versions sending this bit
will lead to firmware 0x3426 assert.
Avoid that by verifying the HW in driver first.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.eec3b5d6152f.Ibc7ffe5ef1c156d878f1300c6059c6c91b374114@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the vif is in MLD mode, we'll get a vif links change from
non-zero to zero on disassociation, which removes all links in
the firmware and adds the 'deflink' the driver/mac80211 has.
This causes the firmware to clear some internal state.
However, in non-MLD mode, this doesn't happen, and causes some
state to be left around in firmware, which can particularly
cause trouble with the ref-BSSID in multi-BSSID, leading to an
assert later if immediately making a new multi-BSSID connection
with a different ref-BSSID.
Fix this by removing/re-adding the link in the non-MLD case
when the channel is removed from the vif. This way, all of the
state will get cleared out, even if we need the deflink, which
is more for software architecture purposes than otherwise.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.90c82837ba4d.I341fa30c480f7673b14b48a0e29a2241472c2e13@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a TX queue has no space for new TX frames, the driver will keep
these frames in the overflow queue, and during reclaim flow it
will retry to send the frames from that queue.
But if the reclaim flow was invoked from TX queue flush, we will also
TX these frames, which is wrong as we don't want to TX anything
after flush.
This might also cause assert 0x125F when removing the queue,
saying that the driver removes a non-empty queue
Fix this by TXing the overflow queue's frames only if we are
not in flush queue flow.
Fixes: a445098058 ("iwlwifi: move reclaim flows to the queue file")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.caf06c8709d9.Ibf664ccb3f952e836f8fa461ea58fc08e5c46e88@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver need to provide details of VLP, AFC
AP type supported for the specific MCC to firmware.
Driver will read the UATS (UHB AP type support) table
from BIOS and sent to firmware using UATS_TABLE_CMD.
Add the support for the same in the driver.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.eb6cf7be17b2.I8977a660564412056d9fd383d57b236cd4b22d00@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The new firmware API uses a new command and notification,
the command configures in which statistics types driver is
interested and the notification is sent periodically.
An additional change in the API is that most of the statistics
data is accumulated and reported by the firmware per MLO link.
Implement new command and notification handlers and adjust to
per-link statistics.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.8cc7df0ebff2.If1dcb57145841c5b3c68ed112bbfcd0201f7acc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to get regulatory domain, driver sends MCC_UPDATE_CMD to the
FW. One of the parameters in the response is the status which can tell
if the regdomain has changed or not.
When iwl_mvm_init_mcc() is called during iwl_op_mode_mvm_start(), then
sband is still NULL and channel parameters (i.e. chan->flags) cannot be
initialized. When, further in the flow, iwl_mvm_update_mcc() is called
during iwl_mvm_up(), it first checks if the regdomain has changed and
then skips the update if it remains the same. But, since channel
parameters weren't initialized yet, the update should be forced in this
codepath. Fix that by adding a corresponding parameter to
iwl_mvm_init_fw_regd().
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.78b2c5b891b0.Iac49d52e0bfc0317372015607c63ea9276bbb188@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During the D3 resume flow, all new rekeys are passed from the FW.
Because the FW supports only one IGTK at a time, every IGTK rekey
update should be done by removing the last IGTK. The mvmvif holds a
pointer to the last IGTK for that reason and thus should be updated
when a new IGTK is passed upon resume.
Fixes: 04f78e242f ("wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow")
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.8ceaf7e5ece7.Ief444f6a2703ed76648b4d414f12bb4130bab36e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware / hardware of devices supporting RSS is able to report
duplicates and packets that time out inside the reoder buffer. We can
now remove all the complex logic that was implemented to keep all the Rx
queues more the less synchronized: we used to send a message to all the
queues through the firmware to teach the different queues about what is
the current SSN every 2048 packets.
Now that we rely on the firmware / hardware to detect duplicates, we can
completely remove the code that did that in the driver and it has been
reported that this code was spuriously dropping legit packets.
Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.54cf4d3d5956.Ic06a08c9fb1e1ec315a4b49d632b78b8474dab79@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Multi rx queue allows to spread the load of the Rx streams on different
CPUs. 9000 series required complex synchronization mechanisms from the
driver side since the hardware / firmware is not able to provide
information about duplicate packets and timeouts inside the reordering
buffer.
Users have complained that for newer devices, all those synchronization
mechanisms have caused spurious packet drops. Those packet drops
disappeared if we simplify the code, but unfortunately, we can't have
RSS enabled on 9000 series without this complex code.
Remove support for RSS on 9000 so that we can make the code much simpler
for newer devices and fix the bugs for them.
The down side of this patch is a that all the Rx path will be routed to
a single CPU, but this has never been an issue, the modern CPUs are just
fast enough to cope with all the traffic.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.2917eb8b7af9.Iddd7dcf335387ba46fcbbb6067ef4ff9cd3755a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mvm_remove_link would return an error if the link could not be
removed. However, doing so prevents recovery if a link was not uploaded
to the FW in the first place and the link_info was not allocated or
fw_link_id is not set.
Returning success means that we can still try to continue with adding
new links in change_vif_links.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.f89bc05aadf6.Idc8fbd671362d962c02b1df87fa6258733631580@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we want to synchronize the NAPI, which was added in
commit 5af2bb3168 ("wifi: iwlwifi: call napi_synchronize()
before freeing rx/tx queues"), we also need to make sure we
can't actually reschedule the NAPI. Yes, this happens while
interrupts are disabled, but interrupts may still be running
or pending. Also call iwl_pcie_synchronize_irqs() to ensure
we won't reschedule the NAPI.
Fixes: 4cf2f5904d ("iwlwifi: queue: avoid memory leak in reset flow")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.a0f4104b479a.Id5c50a944f709092aa6256e32d8c63b2b8d8d3ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't advertise arbitrary checksum flags since we had
to remove support for it due to broken hardware.
Fixes: ec18e7d4d2 ("wifi: iwlwifi: mvm: use old checksum for Bz A-step")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.e37327f1a129.Iaee86b00db4db791cd90adaf15384b8c87d2ad49@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In new firmware, we don't need this any more and it won't
be called any more by mac80211, since powersave handling
is all done by firmware. Remove it from the MLD ops.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.1a1ded96ffc2.Ie49d3004acdd6299fb84346c76b2b2b2f195196b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As session protection API is moving to be per link instead of per mac,
move the time events to be per link too.
Since there is only one concurrent time event per mac, it feels
unnecessary to have the time_event as a member of iwl_mvm_link_info.
(That way we will have to iterate over all links each time we want to
clear a time event, and also we will need mac80211 to tell us the link
id when mgd_tx_complete() is called.)
So leave this as a member of iwl_mvm_vif, but add the link id to the
time_event structure.
The link id in time_event will only be maintained and used for:
1. When SESSION_PROTECTION_CMD is supported (before it, we don't have MLO)
2. For time_events of types SESSION_PROTECT_CONF_ASSOC,
SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV, and
SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION
(not for aux roc/ Hot Spot time_events).
For P2P, non-MLO connections, and pre-MLD API, deflink id, meaning 0,
will be used
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231017115047.21496bcacb18.I79d037325b4fae4c12a22d9477e53fc9c537ad46@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
make htmldocs warns:
Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117.
Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'.
This is because there's a function named ieee80211_tx_status() and a struct named
ieee80211_tx_status. This has been discussed previously but no solution found:
https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/
There's also a bug open for three years with no solution in sight:
https://github.com/sphinx-doc/sphinx/pull/8313
So I guess we have no other solution than to a workaround this in the code,
for example to rename the function to ieee80211_tx_status_skb() to avoid the
name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in
which the skb is not provided as an argument, instead with
ieee80211_tx_status_skb() the skb is provided.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a requirement from OEMs to support a new bit in DSM function 8,
which will indicate that this device is an indoor one, and that it
should activate UNII-1 (5.2GHz) sub band in the World Wide Geo Profile.
Add support for this by reading this bit from BIOS and sending it to the
FW.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.86d4ad178042.Ief40acc08b5482ff147fd17e74e36f1933e43def@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove TDLS stations, we need to remove them from FW
immediately, even while associated. Some previous refactoring
here lost the sta ID condition, add it back.
Fixes: 57974a55d9 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.933011e710a9.I77c069c781e8b2b698b86cc3f43fc3c7e2dde114@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When I implemented iwl_mvm_mac_flush_sta() I completely botched it;
it basically always happens after the iwl_mvm_sta_pre_rcu_remove()
call, and that already clears mvm->fw_id_to_mac_id[] entries, so we
cannot rely on those at iwl_mvm_mac_flush_sta() time. This means it
never did anything.
Fix this by just going through the station IDs and now with the new
API for iwl_mvm_flush_sta(), call those.
Fixes: a6cc6ccb1c ("wifi: iwlwifi: mvm: support new flush_sta method")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.0b5878e93118.I1093e60163052e7be64d2b01424097cd6a272979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This API is type unsafe and needs an extra parameter to know
what kind of station was passed, so it has two, but really it
only needs two values. Just pass the values instead of doing
this type-unsafe dance, which will also make it better to use
for multi-link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.aeb3bf4204cd.I5b0e6d64a67455784bc8fbdaf9ceaf03699d9ce1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We seem to have an issue in case we had a BSS and a P2P device on
channel 1 and then, the P2P device gets an ROC on channel 6. We would
change the channel of the PHY context to channel 6 even if the BSS was
using that same PHY context.
Revamp that code and don't try to change a PHY context, it doesn't mean
much for the firmware anyway. Just remove it and allocate a new one.
This makes the logic easier to follow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.4bc8b90d7be0.I1232dca3fe007362ec0ae0cf1d96217f2544e0d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we want to add a phy_ctxt, we need to increase the ref.
Note that all the WARN_ONs are already in place:
* We check that we don't add a context with ref != 0
* We check that we don't modify a context with ref = 0
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.c19c07746b26.I5b0cbe0760811631a320218a10b88870b5bf0897@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
From its very first stages of development, iwlmvm added all the PHY
context immediately upon firmware boot. Then, all we needed to do is to
modify the contexts. This was fine if the addition of a PHY context that
we don't need is free. This was true until now. Newer devices will run
calibrations upon the addition of a PHY context.
Change the way we work with PHY context in iwlmvm. Fortunately, we
already have all the ref counting in place so that it is not very hard
to do.
Also, since we now remove the PHY context before the link is removed
(but after it has been de-activated of course), it'll confuse the
firmware if we put the late phy_id into the LINK command that removes
the link. Change this to put an invalid phy_id just like we do when we
add a link that has no PHY context yet.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.55a1a78719be.I2032a7d227b57f4fc4370a2793476d47538404fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
bss_info_changed() callback of mac80211 was originally in both
MLD and non-MLD API. Therefore, we extracted the common part
to a function which receives a callback structure with the
mode-specific (non-MLO\MLO) ops. Eventually, for MLO API,
bss_info_changed() callback was split into 2 callbacks:
link_info_changed() and vif_cfg_changed() so it is no longer in use
for MLO, only for non-MLO.
Remove the code that uses the mode-specific callback structure.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.b65fbcdb9295.I2a64a6f1178ee0466755d728addc77acbb2ed6f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Read the EDT (Energy detection threshold) optimization configuration
table from BIOS using DSM Function and send it to FW.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.0b78ee48219a.I8ecbd39d258e2ee0514a7e28632f6c18fb798a83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an IGTK is installed for an AP interface, there is no station
associated with it. However, the MFP flag must be set for the installed
key as otherwise the FW wouldn't use it.
Fix the security key flag to set the MFP flag also when the AP is
an AP interface and the key index matches that of an IGTK.
Fixes: 5c75a208c2 ("wifi: iwlwifi: mvm: support new key API")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.f67005e2d4d2.I6832c6e87f3c79fff00689eb10a3a30810e1ee83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In reality 64 bytes are enough to hold fw version string,
but some compilers can complain (with W=1) that output may be
truncated when building this string with snprintf.
Increase the size to avoid this sort of warnings and state
explicitely that we want the size to be trancated to 32 bytes.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231012153950.f4465b4b4e2b.Idced2e8d63c492872edcde1a3ce2cdd6cc0f8eb7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In 'iwl_parse_tlv_firmware()', check for 'kmemdup()' return value
when handling IWL_UCODE_TLV_CURRENT_PC and set the number of parsed
entries only if an allocation was successful (just like it does with
handling IWL_UCODE_TLV_CMD_VERSIONS above). Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231009170453.149905-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case the link puncturing is changed such that the channel
is no longer punctured, configure the FW correctly indicating
the EHT parameters changed (with a 0 punctured map).
Allow EHT parameters configuration only when the link really
supports EHT.
Fixes: 55eb1c5fa4 ("wifi: iwlwifi: mvm: add support for the new LINK command")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.2666ef86e032.I4b0e95722660acc5345ceefba7e8866a69572e8e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During debugfs command handling transport function is used directly,
this bypasses the locking used by runtime operation function
and leads to a kernel warning when two commands are
sent in parallel.
Fix it by using runtime operations function when sending
debugfs command.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.4f80ac90658a.Ia1dfa1195c919f3002fe08db3eefbd2bfa921bbf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This doesn't require any special implementation from our device, just
allows transmission of SCS request frame containing a QoS
characteristics sub element.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.cc15de23b07b.I35fa1fbacf113b87ba7a13c37760f893eb57643a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is not necessary to keep the P2P Device bound/linked to a PHY
context when there is no active ROC.
Modify the P2P Device flows so the binding/linking would be done
only while ROC is active. With this change the switch_phy_ctxt()
is no longer needed so remove it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.c5b83b4bf9de.Ia80daf3ba0b5fec7d0919247fcbdbdb58bddf02b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac_ctdp_sum contains the power consumption, appears in power save
report, and is used for debugging and collection of statistics.
Add a debugfs handler to start this calculation, iff ctdp
command is supported in the firmware.
While on it, add an option to force start/stop this calculation,
which is safe from the firmware API side.
Signed-off-by: iallouch <itai.allouche@intel.com>
Signed-off-by: Nitsan Bar <nitsan.bar@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.024d75df9e03.I69fdc826f2931a6e1435b450f0602ea060704697@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In RFKILL we first set the RFKILL bit, then we abort scan
(if one exists) by waiting for the notification from FW
and notifying mac80211. And then we stop the device.
But in case we have a scan ongoing in the period of time between
rfkill on and before the device is stopped - we will not wait for the
FW notification because of the iwl_mvm_is_radio_killed() condition,
and then the scan_status and uid_status are misconfigured,
(scan_status is cleared but uid_status not)
and when the notification suddenly arrives (before stopping the device)
we will get into the assert about scan_status and uid_status mismatch.
Fix this by waiting for FW notif when rfkill is on but the device isn't
disabled yet.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.c43b69aa2c77.Icc7b5efb47974d6f499156ff7510b786e177993b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add simple logic that would allow using EMLSR in case
there are multiple valid links:
- In case the connection establishment has just been
completed try to find a valid link pair for EMLSR
functionality where one of the links in the pair is
the current active link.
- In case the valid links changed after connection
was already established, try to find a valid link pair
for EMLSR functionality, in case the EMSLR is not active
yet.
If a valid link pair is found call mac80211 to asynchronously
set the new link pair, otherwise continue using the current active
links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.0c7b89ab29c2.I6600bd16551d75e2bf520d8d0add525568a9f85f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When MEI isn't built, it seems like successfully registering
would be wrong. Change this to an error so that in the rest
of the driver, mei_registered won't be true.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.d410a97cddfb.I7891544938d5edd5e6e7d2d99540b3637f2f1b1b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't check the 0x10 bit here, since the register
holds different values (not just bit masks.). Check for
the exact value where this is needed only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.ab21c7d5e219.I4f9906ebc7ecf38fd276510a276280a9261c8f7f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a per-link debugfs entry in iwlmvm level so we can read/write link
related parameters.
Do it by implementing the link_add_debugfs API introduced by mac80211.
Each entry will have a path like this:
.../netdev:wlan0/link-X/iwlmvm/<file_name>
for each link X.
For non-MLD vifs this callback is called when the original vif
debugfs dir is also created, so handle that case by not creating
the 'iwlmvm' directory again.
Note that we don't have to worry about the cleaning the iwlmvm/*
directory as it is already done by mac80211 when removing the link
(or netdev).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.6a161f021ae8.Ic8f40f2b4682270c94036e3c11c3996ae34266fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 added a new callback to add a vif debugfs.
Implement it instead of adding the debugfs directly,
which will make it properly preserved over switching
the vif from non-MLD/MLD and back.
This requires some rework so that we still have the
symlink but trust mac80211 to add/remove the debugfs.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.818810e242e6.I805a28f9fbef5c52a3a575d04e7a6a909ecf9078@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
YoYo introduces 2 new region types: prph mac and phy blocks.
The data in this regions consists of a list of
(base address, size) pairs.
This way we can set a block of consecutive registers by the
base address and the size, instead of a list of registers.
Add support for parsing and dumping these new region types
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.0a10320f4259.I680ef6e16267d95329ee239f05d0999f5a1719ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
YoYo (debug data collection mechanism) is introducing 2 new types
of regions: prph mac/phy ranges.
These types will have a common logic of reading the data from the
device as the mac/phy prph has. Put it in a separate function so it can
be reused.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231004123422.16f06414c65c.Ie911bc83a1e2f8fddb27b4c5bd24f933f8b674b6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since userspace can choose now what link to establish the
TDLS on, we should know on what channel to do session protection.
Add a link id parameter to this callback.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.ef12ce3eb835.If864f406cfd9e24f36a2b88fd13a37328633fcf9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EMLSR operation and SMPS operation cannot coexist. Thus, when EMLSR is
enabled, all SMPS signaling towards the AP should be stopped (it is
expected that the AP will consider SMPS to be off).
Rename IEEE80211_VIF_DISABLE_SMPS_OVERRIDE to IEEE80211_VIF_EML_ACTIVE
and use the flag as an indication from the driver that EMLSR is enabled.
When EMLSR is enabled SMPS flows towards the AP MLD should be stopped.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.fb2c2f9a0645.If6df5357568abd623a081f0f33b07e63fb8bba99@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't (yet) send the IGTK down to the firmware, but when
we do it needs to be with the broadcast station ID, not the
multicast station ID. Same for the BIGTK, which we may send
already if firmware advertises it (but it doesn't yet.)
Fixes: a5de7de7e7 ("wifi: iwlwifi: mvm: enable TX beacon protection")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.dbc653913353.I82e90c86010f0b9588a180d9835fd11f666f5196@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We can't really know easily if a BIGTK will be used, but
in case firmware supports BIGTK it also supports the very
easy IGTK use (nothing to do on the host), and requires
that we program both IGTK and BIGTK to be able to use the
BIGTK. Thus, change the condition here to set the keys in
firmware (both IGTK/BIGTK) if BIGTK is supported.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.425ebc1ce484.If485ec962636c23d463b678e7da86e11b6fa86c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a race when the device is unbound (maybe because the
module is unloaded) while the opmode start hasn't finished yet.
The complete(request_firmware_complete) after the opmode start
was meant (and commented accordingly) to prevent this problem,
but it's not sufficient when the opmode module is loaded after
the firmware load already completed, which happens regularly
now because firmware load doesn't require userspace, unlike
module load.
Fix this by using the existing opmode registration mutex to
protected the start/stop flows against each other properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.85951554fed8.I62f20f40d79d0f136fa05e46d7fc16dc437fa3db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These retries aren't going to succeed if the device was
deemed dead and needs to be unbound/rebound/... to be
recovered; skip the retries in that case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.9f472069d75d.Ib6684c5b2ea8ed98f082c9b0e9bb2b03c3ea4fe3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The management frames protection flag is always set when the station
is not yet authorized. However, it was not cleared after association
even if the association did not use MFP. As a result, all public
action frames are not parsed by fw (which will cause FTM to fail,
for example). Update the station MFP flag after the station is
authorized.
Fixes: 4c8d5c8d07 ("wifi: iwlwifi: mvm: tell firmware about per-STA MFP enablement")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.2488cbd01bde.Ic0f08b7d3efcbdce27ec897f84d740fec8d169ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace if condition of napi_schedule_prep/__napi_schedule and use bool
from napi_schedule directly where possible.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231009133754.9834-5-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless that we'll
want to fix separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
The support for using link ID in the scan request API was only
added in version 16. However, the code wrongly enabled this
API usage also for older versions. Fix it.
Reported-by: Antoine Beaupré <anarcat@debian.org>
Fixes: e98b23d0d7 ("wifi: iwlwifi: mvm: Add support for SCAN API version 16")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926165546.086e635fbbe6.Ia660f35ca0b1079f2c2ea92fd8d14d8101a89d03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull up the injection rate control one layer, and let it
control the antenna settings as well. Since mac80211 has
already checked that enough antennas are configured, and
we only have two bits, it's enough to just copy the data
over.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110727.12ab7634dbbc.I5aa16c99864ecd7375011a8996de2564fd01fc30@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the injection and other frame TX rate handling
to always return the injection rate directly, by factoring
the legay rate portion out into a new function called in
the two relevant places (injection and non-injection).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110727.dc920357bad0.I5ee8512fb63f0423c1da35b59fea8811d60c1ad3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the NIC is already dead, as detected by the transport then
there's no point to try to grab the NIC access and time out,
we can just fail fast. This may speed up recovery.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.f3d8498c5a60.I5d0c442a731ca4c00716910d215b4bcde6963a65@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new version of wolan_info_notif supports the handling
of bigtk during d3, this patch holds parsing of the new
notif version, adding new keys and updating ipn of
existing keys during the resume flow.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.4ebcd244f436.Ib507573d50fa0ac666d09ab71f5241ccbcd7cd00@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a race with runtime PM getting enabled by userspace:
- we rescan the PCI bus
- this creates the new PCI device including its sysfs
representation
- udev sees the new device, and the (OS-specific?) scripting
enables runtime PM by writing to power/control; this can
happen _before_ the next step - this will runtime-suspend
the device which saves the config space, including the BAR0
that wasn't assigned yet
- the bus rescan assigns resources to the devices and writes
them to the config space of the device
(but not the runtime-pm saved copy)
- the driver binds and this disallows runtime PM, so the device
is resumed, restoring the (incomplete!) config space
- the driver cannot work due to BAR0 not being configured
Fixing the actual race is hard and deep in the PCI layer,
though probably should be done for upstream as well; perhaps
runtime PM should only be allowed after resource assignment,
or some other TBD way.
Work around this in the driver for now by simply (re-)assigning
BAR0 when the driver initializes, if it's unset.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.5f5f782a4e97.I4b7bf5c52ba44a8c7f9878009021689bbfa9c5ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
China 2022 regulations are enabled by default. Disable only when
disabled in BIOS or the firmware don't support this capability. If the
firmware has this capability, read BIOS configuration data in
function 4 using ACPI API and send GRP_REGULATORY_LARI_CONFIG_CHANGE_CMD
to the firmware. Any error while reading BIOS data results in enablement
of china 2022 regulations.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.ba7cb3003e53.If5a180a59ee85ed4a4c9146cfeff841c25b81066@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During HW restart, STA link changes happen while the link-sta is
already allocated (had been prior to the restart). Adjust the
allocation and checks to handle that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.99b7cc754b00.Iaa0503a3100250489fed8b4bdcf60e24a96d3392@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During HW restart in eSR, links allocated in a station and links
active in the interface may differ. Use for_each_sta_active_link
to capture this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.7ee1f1a55e1c.I410c512d1fad7d1cf9b2d2a3451a312821dc816d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
set_antenna() is supported only when the device is not started in
mac80211 which translates to the firmware not being loaded in iwlwifi.
The tricky part is that iwlwifi populates the sband data during its boot
and doesn't touch this data afterwards, but if the antenna settings
forbid MIMO, we need to update the sband data.
Rework the nvm parsing code to allow to get an existing nvm_data and
modify the sband with additional constraints (tx / rx chains masks).
Suggested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230921110726.81d94d630c95.I9473da818cbeeb51b2f89dcc59b00019113e7f55@changeid
[add bugfix from Benjamin for iwl_mvm_get_valid_rx_ant()]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct libipw_txb.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230915200602.never.582-kees@kernel.org
Getting a BAR can be an explanation if we're chasing packet loss. Add a
print with the relevant debug level in that code path.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.913e989a1751.I6bff9020e339d91b61b5ad6aede27bcf8c7e6819@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Transition to d3 is much faster if there is no power save during the
transition. Therefore a new flag was added to the device power cmd to
indicate the power save isn't allowed until the transition is completed.
Set this flag in _iwl_mvm_suspend, when the transition begins.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.ced036106507.Ib5ed5a47ee35f624902bd8882dde3e559285965b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the firmware crashes in the de-activation / re-activation
of the link during CSA, we will not have a valid phy_ctxt
pointer in mvmvif. This is a legit case, but when mac80211
removes the station to cleanup our state during the
re-configuration, we need to make sure we clear ap_sta
otherwise we won't re-add the station after the firmware has
been restarted. Later on, we'd activate the link, try to send
a TLC command crash again on ASSERT 3508.
Fix this by properly cleaning up our state.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.2651e6f6a55a.I4cd50e88ee5c23c1c8dd5b157a800e4b4c96f236@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently we are setting the rate in the tx cmd for
mgmt frames (e.g. during connection establishment).
This was problematic when sending mgmt frames in eSR mode,
as we don't know what link this frame will be sent on
(This is decided by the FW), so we don't know what is the
lowest rate.
Fix this by not setting the rate in tx cmd and rely
on FW to choose the right one.
Set rate only for injected frames with fixed rate,
or when no sta is given.
Also set for important frames (EAPOL etc.) the High Priority flag.
Fixes: 055b22e770 ("iwlwifi: mvm: Set Tx rate and flags when there is not station")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the channel bandwidth is greater or equal than 80MHz,
enable FILS DF transmittion, even if the control channel is non-PSC.
That's because that in 80MHz there must be a sub 20MHz PSC
channel, and since the FILS DF is duplicated on all sub 20MHz
channels, within the 80MHz (hence it will be sent on a PSC channel).
Also, if FILS DF Tx is enabled, always configure the firmware
with the actual channel bandwidth, even before there is a connected
client (rather than the minimum bandwidth e.g. 20MHz), since FILS
DF transmission on a PSC channel take presedent over power
consumption.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.83b9a76fc6c4.I6703111cc6befcd0e9cd9adf3cb127a648dbb7b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device initialized with ME active, this would indeed
work, since the NVM information would be obtained from ME.
However, in the much more likely case that ME isn't active
and the firmware takes actions requiring the sync, this was
not working correctly when the firmware is only run at init
to obtain NVM data, since mac80211 isn't even initialized.
Fix this by moving the 'pldr_sync' handling to a different
place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.45a94d480e56.Id9277f1df6a63ab0dfca0d0c0f448c759e1b8e73@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable the TOP (HW part) fatal error interrupt and add a
print when it happens. Currently FW always adds also the
SW error interrupt, but for >= Bz we'll need to do PLDR
in case this is asserted, so leave a TODO item already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.127d914a4d0d.I41ea409df63474554ef727c49382d0b5bf15939e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the hardware is not responding, as indicated by (currently)
five consecutive HW errors during reading, then just give up
and fail, rather than attempting forever and forever for this
to not return any useful data anyway.
Even though we no longer completely deadlock the machine if it
takes a long time, we still make it pretty much unusable since
we'll eventually hold the RTNL while waiting for this process
to finish.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.345af79f431c.I5ecde6b76b1e3a1572bd59d3cf8f827e767cedeb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the bus has no parent due to the topology, the device rescan
(after some kind of reset was detected) wouldn't work. On the
other hand, some platforms appear to require scanning the parent,
though it's not clear why.
However if there's no parent, then we skip the rescan, which isn't a
good idea. Change the code to go to the parent only if that exists,
and rescan the bus itself where it doesn't.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.f7795a1ccdab.I2b84810a743469a1bcabf3628262cf54311593f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few lines above, space is kzalloc()'ed for:
sizeof(struct iwl_nvm_data) +
sizeof(struct ieee80211_channel) +
sizeof(struct ieee80211_rate)
'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine.
At the end of this structure, there is the 'channels' flex array.
Each element is of type 'struct ieee80211_channel'.
So only 1 element is allocated in this array.
When doing:
mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels;
We point at the first element of the 'channels' flex array.
So this is fine.
However, when doing:
mvm->nvm_data->bands[0].bitrates =
(void *)((u8 *)mvm->nvm_data->channels + 1);
because of the "(u8 *)" cast, we add only 1 to the address of the beginning
of the flex array.
It is likely that we want point at the 'struct ieee80211_rate' allocated
just after.
Remove the spurious casting so that the pointer arithmetic works as
expected.
Fixes: 8ca151b568 ("iwlwifi: add the MVM driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/23f0ec986ef1529055f4f93dcb3940a6cf8d9a94.1690143750.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Debugging indicates that nothing else is clearing the info->flags,
so some frames were flagged as ACKed when they should not be.
Explicitly clear the ack flag to ensure this does not happen.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230808205605.4105670-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_fw_ini_error_dump_range structure has conflicting alignment
requirements for the inner union and the outer struct:
In file included from drivers/net/wireless/intel/iwlwifi/fw/dbg.c:9:
drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2: error: field within 'struct iwl_fw_ini_error_dump_range' is less aligned than 'union iwl_fw_ini_error_dump_range::(anonymous at drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2)' and is usually due to 'struct iwl_fw_ini_error_dump_range' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
union {
As the original intention was apparently to make the entire structure
unaligned, mark the innermost members the same way so the union
becomes packed as well.
Fixes: 973193554c ("iwlwifi: dbg_ini: dump headers cleanup")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616090343.2454061-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EHT devices can support 512 MPDUs in an A-MPDU, each of
which might be an A-MSDU and thus further contain multiple
MSDUs, which need their own buffer each. Increase the number
of buffers to avoid running out in high-throughput scenarios.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.824e522927f1.Ie5b4a2d3953072b9d76054ae67e2e45900d6bba4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On newer hardware, a queue's RB status / write pointer
can be bigger than 4095 (0xFFF), so we cannot mask the
value by 0xFFF unconditionally. Since anyway that's
only necessary on older hardware, move the masking to
the helper function and apply it only for older HW.
This also moves the endian conversion in to handle it
more easily.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.7be2a3fff6f4.I94f11dee314a4f7c1941d2d223936b1fa8aa9ee4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some cases of restart crashing here have been reported,
while we figure out where this is going wrong, check
the link more carefully to avoid the crash.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.2b81f52ce18e.I8f3b1962013107e2d7491d817c3349359341c6ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware was trying to report the B2 RU allocation in
the place previously used here as well, but there's a HW
block that clears the lower 8 bits in this metadata word
even in sniffer mode. Thus, firmware moved B2 to another
place, follow that.
There's no need to detect the version since moving it to
the other place if firmware didn't just means that we'll
continue to report the (erroneous) zero value, and it's
not really something we can detect from the firmware now.
While debugging this we realized that the comments about
placement in the metadata dwords are wrong, update them.
Reported-by: Youhan Kim <youhank@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.dec7f1e07ff8.I623fee2d710cc7b6f392d65b708883ed58632b45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The last member of the enum is meant to count the items,
but sparse cannot increment the previous member due to
its bitwise type. Declaring the last entry with a value
doesn't work either (cannot mix bitwise/non-bitwise) and
declaring it with a bitwise value doesn't work due to
the way it gets used. This led to the current construct.
However, that construct the kernel-doc script doesn't
understand this construct due to the use of #ifdef/#else.
Find another solution that makes both tools happy, we
do now do declare it as the bitwise value but then just
redefine it so that doesn't get used, all still under
__CHECKER__ conditional.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.44bdf6a5fa9e.I9f1ea129f89e53043d48676aed0a3b8f6c31ac08@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't use variable err uninitialized.
The reason for removing the check instead of initializing it
in the beginning of the function is because that way
static checkers will be able to catch issues if we do something
wrong in the future.
Fixes: bf976c814c ("wifi: iwlwifi: mvm: implement link change ops")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.431b01bd8779.I31fc4ab35f551b85a10f974a6b18fc30191e9c35@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case the user sets the enable_ini to some preset, we want to honor
the value.
Remove the ops to set the value of the module parameter is runtime, we
don't want to allow to modify the value in runtime since we configure
the firmware once at the beginning on its life.
Fixes: b49c2b252b ("iwlwifi: Configure FW debug preset via module param.")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.5734e0f374bb.I6698eda8ed2112378dd47ac5d62866ebe7a94f77@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's an alternative link to use while the CSA is in
progress, there's no need to disconnect since another link
is still usable during the switching time. Change the code
here to handle that accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.dd1b96a37e51.Idafdcbfcb36ca4c486f4221aef77643869331514@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the spec, CSA is defined roughly as follows:
- TBTT x: beacon with CSA, count=n (old channel)
- TBTT x+1: beacon with CSA, count=n-1 (old channel)
- TBTT x+n-1: beacon with CSA, count=1 (old channel)
"A Channel Switch Count field set to 1 indicates that the switch
occurs immediately before the next TBTT.
- TBTT x+n: beacon without CSA (new channel)
When we detect it, we currently schedule the CSA event to
be at 10 TUs before TBTT x+n-1, for a beacon interval, to
give us quiet time.
When this event *starts*, we currently notify mac80211
that the channel switch happened, which causes us to add
a session protection event to listen for the first beacon
(and enable TX etc. when that arrives).
We don't even ask for a notification when this event ends
so the code that handles that is effectively dead code.
The session protection duration is 3 beacon intervals,
scheduled at 10 TU before TBTT x+n-1. It will thus end
just before TBTT x+n+2.
Unfortunately, if the AP doesn't transmit or we miss just
the first two beacons on the new channel, then this will
cause us to disconnect. Or even just one, if the AP isn't
quite aligned with the TBTT after the switch.
However, listening to the _end_ of the time event isn't
what we want either, because we want all the new PHY and
other config that needs to come from mac80211 to start
early, so we have a head-start for the new channel, since
we're not going to use the old one anyway for this time.
So since we don't really have anything better to do at
this time, and this is relatively rare, just make the
session protection use 5x the beacon interval instead of
just 3x, so it's more likely we catch a beacon even if
the AP neglected to send it, or we just miss it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.a74176bac37c.I029a2ebcd1b5012327c728ffa1d33fac19cfdf4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pass the right link_id to ieee80211_chswitch_done.
Use the link_conf parameter passed to post_channel_switch() to get the
right ap_sta_id.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.19470584fa51.Iad38b5369bededaa126b3eb3cff79f23d61bd783@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows to finalize the CSA per link.
In case the switch didn't work, tear down the MLD connection.
Also pass the ieee80211_bss_conf to post_channel_switch to let the
driver know which link completed the switch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Handling of BSS_CHANGED_PS was missing in vif_cfg_changed
callback. Fix it.
Fixes: 22c5883435 ("wifi: iwlwifi: mvm: replace bss_info_changed() with vif_cfg/link_info_changed()")
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230905162939.5ef0c8230de6.Ieed265014988c50ec68fbff6d33821e4215f987f@changeid
[note: patch looks bigger than it is due to reindentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There were are a number of cases in mac80211 and iwlwifi (at
least) that used the sband->iftype_data pointer directly,
instead of using the accessors to find the right array entry
to use.
Make sparse warn when such a thing is done.
To not have a lot of casts, add two helper functions/macros
- ieee80211_set_sband_iftype_data()
- for_each_sband_iftype_data()
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.
Major changes:
rtw89
* Introduce Time Averaged SAR (TAS) support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmToqosRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv9XQf9HDq9smbuWLvwzNjbbS31hHFLmnfhN8Zp
+Zzn47gpMCle9ahGLQyw8lcfNPWCMyqOu4sGQ6hyyuH+YXoxZryuq9QDwWo9L/b1
5Cpm4IaBYBMm0ZoOkWw2lQSzGyNrXgvCEKRVC+pYQMvr5V2aEWxT/kT4guiou9D5
OXPRFN2iqZP0Q3TKcfKWRnWn3S0Ok3kZCFuXcWkL0sgwjqP/wbAPO1XNI1IImKNM
xUd0zT4vK/layYq7i20y8blglI5kcp/aKCFEwYpQC2WPeZ3Wtl1G9PQ8eze5Gc2Q
NTw3xfr6tENIcAmYoLdBdKbUq6e6pwLwXlojlZ2beR6s7LHM30AinQ==
=2Hja
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.6
The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.
Major changes:
rtw89
- Introduce Time Averaged SAR (TAS) support
* tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (114 commits)
wifi: rtlwifi: rtl8723: Remove unused function rtl8723_cmd_send_packet()
wifi: rtw88: usb: kill and free rx urbs on probe failure
wifi: rtw89: Fix clang -Wimplicit-fallthrough in rtw89_query_sar()
wifi: rtw89: phy: modify register setting of ENV_MNTR, PHYSTS and DIG
wifi: rtw89: phy: add phy_gen_def::cr_base to support WiFi 7 chips
wifi: rtw89: mac: define register address of rx_filter to generalize code
wifi: rtw89: mac: define internal memory address for WiFi 7 chip
wifi: rtw89: mac: generalize code to indirectly access WiFi internal memory
wifi: rtw89: mac: add mac_gen_def::band1_offset to map MAC band1 register address
wifi: wlcore: sdio: Use module_sdio_driver macro to simplify the code
wifi: rtw89: initialize multi-channel handling
wifi: rtw89: provide functions to configure NoA for beacon update
wifi: rtw89: call rtw89_chan_get() by vif chanctx if aware of vif
wifi: rtw89: sar: let caller decide the center frequency to query
wifi: rtw89: refine rtw89_correct_cck_chan() by rtw89_hw_to_nl80211_band()
wifi: rtw89: add function prototype for coex request duration
Fix nomenclature for USB and PCI wireless devices
wifi: ath: Use is_multicast_ether_addr() to check multicast Ether address
wifi: ath12k: Remove unused declarations
wifi: ath12k: add check max message length while scanning with extraie
...
====================
Link: https://lore.kernel.org/r/20230825132230.A0833C433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case the SAP connection is established before the interface is
added, the mac address is still not set. Don't send the nic info
SAP message in this case since it will result in sending an invalid
mac address. The nic info message will be sent with a valid mac
address when the interface is added.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.a49436bed387.I0ca88d72456e6e9f939bbc2e0c52ffb173fbc97e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The HOST_GOES_DOWN message should be sent even if wiamt is disabled.
Otherwise wiamt may still use the shared memory (e.g. if enabled
later) while it's no longer valid.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.2baad50eb1c3.If7b7c1dc2d6bfc6bacf7f6c72972f19714d9d973@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case CSME holds the NIC and SAP connection is already established,
iwl_pcie_prepare_card_hw() during iwl_pci_probe() will fail
(which is fine since CSME will release the nic later when asked with
a SAP message). In this case tring to grab nic access to read the
crf ids will fail with a warning.
Avoid the warning by only trying to read the crf ids in case prepare
card succeeded.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230822103048.9b026fa7b97e.I12bea7e6eef54eeeaf916b68d71583e92ff310fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
LMAC error table address was checked against UMAC
error table minimum address defined. Because of that,
the LMAC error table was not read, since both addresses
belong to different ranges. As addresses are updated from
FW alive message and should be correct, this check is not
needed.
Still keep the check for address 0 to avoid NULL address read.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.08ab1497904d.I270d4c5bcc23c5ecd0b7db475501032c450852ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are occasionally bugs which cause the device to try
to use a TFD that it wasn't supposed to, and these are
very hard to diagnose. Fill all unused TFDs with a debug
command that immediately causes an error to be detected
in these cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.10a9af1ca91f.Ifc790d62c52b4bc9a74c9581610af498509f5759@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We need this earlier in the file next, move it up to have
an easier to read change, since this moves other things
in the diff git generates by default.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.c6d798b600bb.I9b891ee3d3dc67822a28e44941409f5b7cb637cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is a bit messy right now, there are functions for both,
but then gen1 function can actually deal with both gen1 and
gen2, due to the confusion about use_tfh/gen2 cleaned up in
the previous patch.
Fix the common paths to call the right functions and remove
handling of gen2 from the gen1 function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.baf23841ec5c.I40702e94b25db05e82f935f14548316f8c6429b9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no reason to warn here, it's not an internal consistency
issue, we even use this to check if the device is dead, and if it
read_mem() returns an error that's either because grab NIC access
or memory allocation failed, both of which are already noisy.
Just remove the warning entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230816104355.5f4e80eb63cc.Iffd88f63f95575f28e503da13b473724e3341aee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the code to use the PTP HW clock was added, it didn't update
the Kconfig entry for the PTP dependency, leading to build errors,
so update the Kconfig entry to depend on PTP_1588_CLOCK_OPTIONAL.
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_init':
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294: undefined reference to `ptp_clock_register'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294:(.text+0xce8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301: undefined reference to `ptp_clock_index'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301:(.text+0xd18): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_remove':
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315: undefined reference to `ptp_clock_index'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315:(.text+0xe80): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319: undefined reference to `ptp_clock_unregister'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319:(.text+0xeac): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_unregister'
Fixes: 1595ecce1c ("wifi: iwlwifi: mvm: add support for PTP HW clock (PHC)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202308110447.4QSJHmFH-lkp@intel.com/
Cc: Krishnanand Prabhu <krishnanand.prabhu@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230812052947.22913-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.
There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622
Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/
Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/
Fixes: 19898ce9cf ("wifi: iwlwifi: split 22000.c into multiple files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
For historical reasons, unbound workqueues with max concurrency limit of 1
are considered ordered, even though the concurrency limit hasn't been
system-wide for a long time. This creates ambiguity around whether ordered
execution is actually required for correctness, which was actually confusing
for e.g. btrfs (btrfs updates are being routed through the btrfs tree).
There aren't that many users in the tree which use the combination and there
are pending improvements to unbound workqueue affinity handling which will
make inadvertent use of ordered workqueue a bigger loss. This pull request
clarifies the situation for most of them by updating the ones which require
ordered execution to use alloc_ordered_workqueue().
There are some conversions being routed through subsystem-specific trees and
likely a few stragglers. Once they're all converted, workqueue can trigger a
warning on unbound + @max_active==1 usages and eventually drop the implicit
ordered behavior.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZJoKnA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGc5SAQDOtjML7Cx9AYzbY5+nYc0wTebRRTXGeOu7A3Xy
j50rVgEAjHgvHLIdmeYmVhCeHOSN4q7Wn5AOwaIqZalOhfLyKQk=
=hs79
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull ordered workqueue creation updates from Tejun Heo:
"For historical reasons, unbound workqueues with max concurrency limit
of 1 are considered ordered, even though the concurrency limit hasn't
been system-wide for a long time.
This creates ambiguity around whether ordered execution is actually
required for correctness, which was actually confusing for e.g. btrfs
(btrfs updates are being routed through the btrfs tree).
There aren't that many users in the tree which use the combination and
there are pending improvements to unbound workqueue affinity handling
which will make inadvertent use of ordered workqueue a bigger loss.
This clarifies the situation for most of them by updating the ones
which require ordered execution to use alloc_ordered_workqueue().
There are some conversions being routed through subsystem-specific
trees and likely a few stragglers. Once they're all converted,
workqueue can trigger a warning on unbound + @max_active==1 usages and
eventually drop the implicit ordered behavior"
* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
scsi: NCR5380: Use default @max_active for hostdata->work_q
media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: mwifiex: Use default @max_active for workqueues
wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
greybus: Use alloc_ordered_workqueue() to create ordered workqueues
powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
MAINTAINERS
* add missing driver git trees
ath11k
* factory test mode support
iwlwifi
* config rework to drop test devices and
split the different families
* major update for new firmware and MLO
stack
* initial multi-link reconfiguration suppor
* multi-BSSID and MLO improvements
other
* fix the last few W=1 warnings from GCC 13
* merged wireless tree to avoid conflicts
-----BEGIN PGP SIGNATURE-----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=KSBu
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Notable changes this time around:
MAINTAINERS
- add missing driver git trees
ath11k
- factory test mode support
iwlwifi
- config rework to drop test devices and
split the different families
- major update for new firmware and MLO
stack
- initial multi-link reconfiguration suppor
- multi-BSSID and MLO improvements
other
- fix the last few W=1 warnings from GCC 13
- merged wireless tree to avoid conflicts
* tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits)
wifi: ieee80211: fix erroneous NSTR bitmap size checks
wifi: rtlwifi: cleanup USB interface
wifi: rtlwifi: simplify LED management
wifi: ath10k: improve structure padding
wifi: ath9k: convert msecs to jiffies where needed
wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow
wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow
wifi: iwlwifi: mvm: Refactor security key update after D3
wifi: mac80211: mark keys as uploaded when added by the driver
wifi: iwlwifi: remove support of A0 version of FM RF
wifi: iwlwifi: cfg: clean up Bz module firmware lines
wifi: iwlwifi: pcie: add device id 51F1 for killer 1675
wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices
wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants
wifi: iwlwifi: also unify Ma device configurations
wifi: iwlwifi: also unify Sc device configurations
wifi: iwlwifi: unify Bz/Gl device configurations
wifi: iwlwifi: pcie: also drop jacket from info macro
wifi: iwlwifi: remove support for *nJ devices
wifi: iwlwifi: don't load old firmware for 22000
...
====================
Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As part of the new security API in the FW, all security keys are to
be removed before station removal. Until now IGTK rekey
wasn't supported in the D3 resume flow, and thus the driver might
not know the right key to remove.
If an IGTK was rekeyed during D3 the old IGTK is removed and the
new key is updated. If not, the old key's IPN is updated.
As opposed to GTK, which both the FW and the driver hold it's two
most recent keys, only one IGTK is held.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621144844.b53c301c07e6.I375277a10a1f756b93d4a343f6664351a80189c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When resuming from D3 the two most recent GTKs are passed from
the FW with wowlan_info_notif. Both keys should be updated as
they both might be needed upon FW restart and they both should
be removed upon station removal.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621144844.3ea3a9f52ec2.I7cedfa2bb0eafb83e7c77363673560acf05bff74@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Intel Killer AX1675i/s with device id 51f1 would show
"No config found for PCI dev 51f1/1672" in dmesg and refuse to work.
Add the new device id 51F1 for 1675i/s to fix the issue.
Signed-off-by: Yi Kuo <yi@yikuo.dev>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130444.ee224675380b.I921c905e21e8d041ad808def8f454f27b5ebcd8b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have the trailing dash here, but that complicates all
the code. Simplify this by removing the dashes, adding
them to the *_MODULE_FIRMWARE macros, and adjusting the
code using this accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.72240ca13b83.I1f4ed547f0964719ed98a3ef928080462d594491@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the configurations for the various Bz/Gl devices
are basically identical, except for Gl A-step and the
firmware filename prefixes.
Add some infrastructure to auto-generate the firmware
filename prefix based on the detected MAC step and
RF name/step, and remove all the unneeded configs.
This reduces the size of the iwlwifi module by ~9k:
517582 27111 560 545253 851e5 drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
526885 27083 560 554528 87620 drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.1dc121ba338f.I07d651516eb82cbaded4724ef30558a50f2fa866@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't need this here anymore, ANY is just fine.
Still keep the rest of the infrastructure so we can
more easily add back support for testing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.168c714cbb83.I0721ce86a042c4d8004914129bab46d7ccc8cb00@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The earliest firmware released for these products is with
API version 50, so there's no point in trying to load any
versions before that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.768186c0475d.I7de717072221712176a3085d71c8018ae0348db8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The earliest firmware released for these products is with
API version 59 (for 'ty' only), so no point trying to go
back in time even further than that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.ebe02b5dbddb.I51484ebb6c89256b0e6e7f9bb24f597c4ebead67@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
They're not the same as Bz or any prior ones, and there's
already one place in the driver that would erroneously
assign a workaround to A-step Sc devices if they're just
treated as a version of Bz. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.e98272ddb808.If18577b2393f631d1bfaa931287cae106fa32438@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Split the configuration list in 22000.c into four new files,
per new device family, so we don't have this huge unusable
file. Yes, this duplicates a few small things, but that's
still much better than what we have now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.7543603b2ee7.Ia8dd54216d341ef1ddc0531f2c9aa30d30536a5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the new Integrated Connectivity (CNVi)
and Companion RF (CRF) versions and their combinations
to handle new devices.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.716fd707e847.I34f6ffd61e3210c926868a3e961b16d1742bba29@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for scan request command version 17, which supports
specifying the maximal EIRP PSD value that can be used for
probe request transmission on a given channel.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.0a41c847d450.I0c9b45cc3eb39d44c75d3bdca84f0a91fdad1fa1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The current formula can skip both too much and not enough time,
given the +1 (where the comment about firmware is wrong). Adjust
the formula accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.32406b6828ae.I88c315b85f7c56ac6109f84580b95a3dd104ff6c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When hostapd starts up, it may start up with only one link
while the other is still scanning for overlapping BSSes. A
station might start to connect at this point, but we run
into this warning instead. Since there's no need to check
for _all_ links, restrict the check to just the affected
links that the STA will be using.
Fixes: 57974a55d9 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Reported-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.c3d5a006ec21.Ib4715381f598f4c18d67cd9598ebd5cdbe7d2b09@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Roee reported various hard-to-debug crashes with pings in
EHT aggregation scenarios. Enabling KASAN showed that we
access the BAID allocation out of bounds, and looking at
the code a bit shows that since the reorder buffer entry
(struct iwl_mvm_reorder_buf_entry) is 128 bytes if debug
such as lockdep is enabled, then staring from an agg size
512 we overflow the size calculation, and allocate a much
smaller structure than we should, causing slab corruption
once we initialize this.
Fix this by simply using u32 instead of u16.
Reported-by: Roee Goldfiner <roee.h.goldfiner@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.f428c856030d.I2c2bb808e945adb71bc15f5b2bac2d8957ea90eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sending the LARI configuration may trigger calibration, which can have
undesired side effects. Move the command to be send earlier (before the
phy contexts are registered) to avoid unintended side effects.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.80742497eb3f.I3e599a796290082e6d331ea495a5591d55de4726@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This struct member is read-only, so can never change away
from the default value of zero. Remove the code that's in
an if on the value, since it's effectively dead code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.e7c96d0aa805.I5b158ce15e48393d2896c0bff9f644d983f0e92d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a discrete NIC is connected to a PCIe link hat isn't at least
Gen3 (8.0 GT/s), then we cannot sustain 320 MHz traffic, so remove
that from EHT capabilities in that case.
While at it, also move setting 320 MHz beamformee to the right
place in the code so it's not set while not supporting 320 MHz.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.b77a1574a0a7.Id4120c161fb7df6dedc70d5f3e3829e9117b8cb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for reading the EHT MAC capabilities A-MPDU
size exponent field, as indicated by the draft spec.
Also clarify the existing code a bit and add comments
so it's clearer to understand what's going on here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.c5e00045d90f.I7520787fca8f8430a564adedf975d069ad8c5417@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the firmware says that the channel switch is happening, we check
that we know about that switch by checking the csa_active bit.
Until now, we checked the bss_conf from the vif instead of taking the
bss_conf of the link.
Fix that.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.63f835a4f578.I0bb2a231e4da506b7c751dc23a428558f9ecfa75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ensure that the TX command scratch fits into the buffer
provided by the first TB. It does, of course, but add
some build-time validations in case we touch this code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.8f54f2990b92.If19a038dfd633d4601e3d44dd0ff678bc0a851e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have three places doing this check, and even in
slightly different ways (with/without an intermediate).
Refactor that to a new small inline function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.f3e87ddd5bce.Ifefba753043b68c394590a35bc6914a0f6497fd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for AX1690i and AX1690s devices with
PCIE id 0x7AF0.
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230619150233.461290-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following gcc 13.1 warning observed with W=1:
drivers/net/wireless/intel/iwlwifi/dvm/rs.c:207:39: warning:
‘iwl_rate_mcs’ defined but not used [-Wunused-const-variable=]
This table is actually used in 'rs_sta_dbgfs_scale_table_read()'
only if CONFIG_MAC80211_DEBUGFS is enabled, so the whole thing
may be moved close to its actual use.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20230619103900.300628-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There several transitions to handle in eSR mode:
* SMPS should be disabled when in eSR mode
* indicate to the fw whether the new added link should use the
listen lmac or the main lmac
* RLC is offloaded when in eSR mode; adjust RLC command accordingly
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.fb6409f44aca.I502460dec15e0b76035ad3cd809afa4ac16e9fe1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The max active links that are supported by the FW is hard coded.
This is wrong since this value is HW-dependent. Fix this by
determining according to the actual HW.
Also remove a redundant check that the number of active links
doesn't exceeds the maximum.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230615094410.e78ad74c6715.I68b26911c0a312d72eaf25344b448d03b1c61f4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Validate index before access iwl_rate_mcs to keep rate->index
inside the valid boundaries. Use MCS_0_INDEX if index is less
than MCS_0_INDEX and MCS_9_INDEX if index is greater then
MCS_9_INDEX.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.79f16b3aef32.If1137f894775d6d07b78cbf3a6163ffce6399507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the AP is an AP MLD, then we shouldn't track just the BSSID
but the MLD address. Just generally use ap_addr since it has
the BSSID in the non-MLD case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.b6a4f7edd10c.Ie5a8029ed686b9441620ba06596d430432f65559@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We skipped this in the past, but now we will need it for some
platforms. Implement loading the PHY filter configuration IDs
from the WPFC ACPI table. Note that the firmware must also be
aware of the right filter configuration IDs (they're just the
IDs of a filter configuration, not the actual configuration).
Remove the useless hardcoded zeroes while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry
is zero. For the case when entry->entry is not equal to 0, rxq
won't be NULL even if trans_pcie->rxq is NULL. Modify checker to
check for trans_pcie->rxq.
Fixes: abc599efa6 ("iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.5a5eb3889a4a.I375a1d58f16b48cd2044e7b7caddae512d7c86fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the firmware misbehaves (according to the driver), we
often either ignore that, or WARN_ON, which is very noisy
but doesn't really help.
Add a little helper macro IWL_FW_CHECK() that can be used
in place of WARN_ON() in conditions, and make it take a
message that's printed in this case. We can also add more
behaviour to this in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.2e12ac670cea.Ia0198036b7a626876d836bd41a4b2d2b1e65c5ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware technically only needs this when the link is
newly added, but it's much easier for debugging if it's
always available, so include it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.daecd0e626f7.I0f8a16a6d80a283c9f947c9bb0fc50a7c6853948@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When calling iwl_mvm_set_fw_qos_params() we explicitly pass
a pointer to the first array element, but the function will
treat it as an array. Simplify and clarify the code and pass
the array instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.6fb4a9743b1b.I801007d207f6539a9e0996366ec593e2038b1f90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have the data structure set up to store the parameters
per link, but weren't using them. Fix that and store them
in the right link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.332c4949a1be.Icae03975d578b0cc82279911a1ea7cbc313046d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Again, during some (botched) FW restart scenarios we can end
up with a NULL link in the driver but mac80211 thinking all
is still going OK. If we try to TX at the same time, we can
crash there. Fix that by checking for a NULL link during TX.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.cee48479deec.I4eef58f7b67afafb7b3294adbeb6e0067b68419d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We've observed that in some botched firmware restart scenarios
when the firmware crashes again while we're reconfiguring, we
can hit NULL pointer crashes here. The underlying issue is the
botched restart which we need to fix separately, but until we
can do that, don't crash hard here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e47b0192c78f.I67fa9f07cd1c8b3bdc8db25f5e31c1c680c49745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On fw error dump, dmesg prints FSEQ register data. Add 4
additional prints in order to match those being dumped
by Windows driver. Allows fw infra to correctly detect
version mismatch.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f40dc9c810a8.I26227900d0b7e9a71fefe5cbf57cf6b46ee44413@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are evidently cases where the firmware completes the
reset but the interrupt isn't received correctly, so check
for the interrupt again after the timeout, and don't dump
the firmware error log if the right bit is set.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.00cc2d9b88c3.I429bfe800f17c624e50c0b0c10dd2cd7d885f199@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mac80211, it's required that we pull from TXQs by calling
ieee80211_tx_dequeue() only with softirqs disabled. However,
in iwl_mvm_queue_state_change() we're often called with them
enabled, e.g. from flush if anything was flushed, triggering
a mac80211 warning.
Fix that by disabling the softirqs across the TX call.
Fixes: cfbc6c4c5b ("iwlwifi: mvm: support mac80211 TXQs model")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have this helper now instead of open-coding the check for
the dmi_tas_approved_list, so use it even here. It was added
for debugfs use, but it's better to be consistent.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.f3741f5cdef4.I5e0bf522189dc595ee38d05e93994211d32ec0f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and
iwl_acpi_get_object() need not be exported etc., they're used
only within the same file. Make them static.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.e866032e4106.Ifede7f7c25b17a8215b154ce01da513b75384325@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We can't just dereference the sband->iftype_data pointer,
that's an array so we need to access the right entry. Use
the previously introduced helper functions to do that.
There are also cases, e.g. when loading with disable_11ax=1,
where the pointer might be NULL but we still attempt to use
it, causing a crash.
Fixes: 529281bdf0 ("iwlwifi: mvm: limit TLC according to our HE capabilities")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.a1f2b17ee39b.I8808120be744be8804815ce9e3e24ce6d2b424e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While vif pointers are protected by the corresponding "*active"
fields, static checkers can get confused sometimes. Add an explicit
check.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614154951.78749ae91fb5.Id3c05d13eeee6638f0930f750e93fb928d5c9dee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we restart the firmware, we shouldn't keep old debug data
around. Since the "allocate" function might not reallocate the
memory blocks (they're only freed when we unbind from the device),
clear the memory to have a clean slate for debug data.
This is a bit more complex since we normally don't enter into
the allocation function, but duplicating the logic didn't seem
enticing either, so rework the allocation a bit to always go
into the individual block allocation, but there clear if it's
already allocated, rather than allocating again.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.30b82881cfbf.I39520aff8ac95ee64d39dc5913525a1efd7995fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_pcie_alloc_fw_monitor_block() function has an argument
that's only ever hard-coded to 11, remove it and hard-code the
value into the function itself with a comment.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.737c153e8259.Ibe6250ca812cfa2f00ac47e5e0d1595c6b9b4875@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we restart the firmware, we shouldn't keep old debug data
around. Since the "allocate" function might not reallocate the
memory block (it's only freed when we unbind from the device),
clear the memory to have a clean slate for debug data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.73c32255a132.Ibd7101dcd285b01ee879fddfbf52c30d49ced3c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Given the existing code in iwl_dbg_tlv_update_drams(), the
following can happen and cause firmware asserts, and even
the device to become unusable:
* We set the magic so the firmware will use the data;
* we try to fill multiple allocation IDs, with at least
one successful, but - crucially - one failing and thus
not touching the data;
* we don't clear the data since there was one success.
This doesn't seem like much of a problem just yet, however,
what happens now is that the allocation ID(s) that failed
are not initialized.
There are two additional things to know:
* we never free these allocations across FW restart or
interface down/up etc., in fact we never free them until
the driver is unbound from the device (e.g. unloaded)
* the firmware uses the DRAM info structure for real debug
data when it has used it completely
Given that, and the fact that we never initialize the data
on restart, we can be unlucky and end up with an allocation
that looks for the most part valid (valid ID, valid number
of buffers, etc.) but has bad sizes - causing the firmware
to throw an assert we can never recover from.
Fixing the code to have the entire buffers cleared (which
we should do so old debug data isn't sticking around) is a
bit more complex, so as a first step make the actual code
that fills the information more robust by clearing the
structure first, and filling the magic values only if it
actually succeeded for one, rather than doing it the other
way around.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.87cf5528f4bc.I26ac907a4162297808b33467fc7f5d8177474a34@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newest firmware don't advertise the version of ADD_STA because it has
been replaced by another command. There are old firmware images
that also don't advertise it. Replace all the checks with a new
inline, and in that check for either MLD API or the ADD_STA
command version.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4b9305510223.I7cc143d87186f8441e9b8435cc550b76734c7eef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware only supports a single IGTK, and due to some
changes it really doesn't like to have multiple programmed
in later versions. Since only newer firmware cannot remove
a key that isn't present any more, adjust only the MLD API
code to keep track of the previous IGTK and remove it when
a new one is added.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.3fde1ef09270.I2e12a3b0bba4325c07dc8fcce39b711f158bd621@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_mvm_get_lmac_id() function is currently
defined as a static inline function under fw/api
and receives mvm's fw pointer. It will need the
ability to access other mvm struct members for
future capabilities such as debug. Move the function
out of the fw/api and into mvm proper as a regular
function and have it receive the pointer to mvm.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.507b2f9f64eb.I0ec91310e1911c33faf396b5e17bcb11a164f6ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add prints of ETSI and China bits.
Check if need to mask the China bit (when the firmware doesn't
support it) in a separate flow, so it will be easier to follow
the conditions. Add a separate message for the command version.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.4ee455ec1ee8.I6f1a4b7dfa5cfd9b4f4a4b5bb5567849e629ae96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Initialize the phy_data.rx_vec for both version-3 and above
where it is 4-byte data size and below version which has
data size of 2-byte.
The data will be sent uninitialized in called function if
notification version is less than three.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.a6bb856f04bc.I9a15075f3dad61dcabdcd1ed0d34cf3e8ec5453f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we only need to support BTM rejection.
However, in the future we might want to support other BTM modes.
Rephrase its naming.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.ad20f10668d1.Icbb3fbae50b2302b97225b183dd336b02a4f37ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support new firmware that can validate the validate bits in
sniffer mode, and advertise that fact and the result of the
checks in the U-SIG radiotap field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.c20480aa1171.Icc0d077dae01d662ccb948823e196aa9c5c87976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware needs to know the esr_transtition_timeout to time the
transition between EMLSR and single radio with the AP.
Add the EMLSR support bit to the wiphy extended capabilities so that
it'll be sent in our association request frame. There are some
limitations in the implementation so we cannot use zero
padding/transition delay; fill the correct values.
Also, feed the medium_synchronization delay to the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.09fa06820d03.Ie9a9fd37d4948f8c5dd91161de254184b1a093c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some versions of the new hardware don't have a functional
version of the new offload method, but still have stricter
checks on the MAC header (MH) length in the offload assist
word. Include that even if checksumming isn't offloaded to
hardware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.bba713f7495a.Idbc8e3ce313b51af4060326e0191bd338b3163a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The program counter address is read from the TLV and
PC address is printed in debug messages.
Read the value at PC address and print the value
instead of the register address.
Fixes: 5e31b3df86 ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.e5a5f18f1b2c.Ib6117a4e7f66a075913241cc81477c0059953d5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The hardware, depending on which part fails or times out,
returns 0xA5A5A5A. or 0x5A5A5A5. with the lowest 4 bits
encoding some further reason/status. However, mostly we
don't really need to care about the exact reasons, so
unify the checks for this to avoid hardcoding those magic
values all over the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.3e2959741a38.I1c297a53787b87e4e2b8f296c041921338573f4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use flags field from struct ieee80211_tx_info in order to get
LDPC/STBC support. The rate parameter, used originally, is 16
bits only and does not have details of LDPC/STBC support.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.5a8856739b11.I6af4a55b22ed856f484ba77f87723dceec4904f2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.71a7070aecd7.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sta_init function can fail and if it returns an error then
driver should not send the request to fw to add a station.
Fixes: 69aef84805 ("wifi: iwlwifi: mvm: refactor iwl_mvm_add_sta(), iwl_mvm_rm_sta()")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.1ecd293539e8.I5ec6aab387bb2fe743a7402581beaeb9c801d31f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All of the station elements are really elements for the link. Create
them from the correct callback and return the link specific information
rather than always using the default link.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.a8e0c40d325e.I374d9433c3b8694667e1ce550d65f6f1f0d23c05@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's quite a bit of code accessing sband iftype data
(HE, HE 6 GHz, EHT) and we always need to remember to use
the ieee80211_vif_type_p2p() helper. Add new helpers to
directly get it from the sband/vif rather than having to
call ieee80211_vif_type_p2p().
Convert most code with the following spatch:
@@
expression vif, sband;
@@
-ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_eht_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_6ghz_capa_vif(sband, vif)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.db099f49e764.Ie892966c49e22c7b7ee1073bc684f142debfdc84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Lockdep on 6.4-rc on ThinkPad X1 Carbon 5th says
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.4.0-rc5 #1 Not tainted
-----------------------------------------------------
kworker/3:1/49 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff8881066fa368 (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}, at: rs_drv_get_rate+0x46/0xe7
and this task is already holding:
ffff8881066f80a8 (&sta->rate_ctrl_lock){+.-.}-{2:2}, at: rate_control_get_rate+0xbd/0x126
which would create a new lock dependency:
(&sta->rate_ctrl_lock){+.-.}-{2:2} -> (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&sta->rate_ctrl_lock){+.-.}-{2:2}
etc. etc. etc.
Changing the spin_lock() in rs_drv_get_rate() to spin_lock_bh() was not
enough to pacify lockdep, but changing them all on pers.lock has worked.
Fixes: a8938bc881 ("wifi: iwlwifi: mvm: Add locking to the rate read flow")
Signed-off-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/79ffcc22-9775-cb6d-3ffd-1a517c40beef@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit b70813e4a8 ("wifi: iwlwifi: update response
for mcc_update command") since it causes a merge conflict, and it
seems easier to redo the patch later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 1bcbb1208e ("wifi: iwlwifi: mvm: FTM
initiator MLO support") as it causes a merge conflict, and
we can defer and re-do those changes later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When PNVM is obtained from UEFI, there's an additional memory
descriptor TLV that has to be handled. It is the same TLV that
holds data in the reduced power tables. Also, in this TLV, the
actual data is located after address and size, so add the
corresponding offset.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.8c5f5ee8e30b.Id1893c9dec140b5ba4abe8a121c2e1a1d121d2d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the field reduce_power_dram with a struct that holds data about
the reduced-power tables drams regions. Generalize load_payloads_segments()
to work for both pnvm tables and reduction power tables.
Make required adjustments in the data structures.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.6fe66958f049.I85d80682229fc02fe354462cc9da40937558f30c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Generalize the parsing, loading, and setting of the power-reduce
tables, in order to support allocation of several DRAM payloads
in the future.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.564f1eead99b.Iaba653b21dc09aafc72b9bbb3928abddce0db50a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Take the part that copies the tables into DRAM, out of the method
that sets the prph_scratch to make the code cleaner. Each of the
operations will get more complex in the future when it will also
support larger power-reduce tables images.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.7695684dc848.I13626cd318e5d68efec9618b2045f52788bff114@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Save the pnvm payloads in several DRAM segments (not only in one as
used to). In addition, allocate a FW structure in DRAM that holds the
segments' addresses and forward its address to the FW. It's done when
FW has the capability to handle pnvm images this way (helps to process
large pnvm images).
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.dbdad8995ce1.I986213527982637042532de3851a1bd8a11be87a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change the field pnvm_dram to an array that describes many regions
and add a counter to the number of pnvm regions that were allocated
in DRAM.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.bb206d71bf45.I627640701757bb2f234f8e18a3afbd6af1206658@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change iwl_pnvm_parse so it will only save the information into the
iwl_pnvm_image struct. This enables to use the parsing code for the
power reduce tables in the future.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.504b42fc1611.I4ddf6ad76d922d118fcbcc4f0e9ec003753d0b75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Take the part that is copying the pnvm image into DRAM, out of the
the method that sets the prph_scratch. Makes the code cleaner since
those 2 operations don't always happen together (loading should happen
only once while setting can happen more than once).
In addition, each operation will get more complex in the future when
it will support also larger pnvm images.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.4c0728239fd6.Ibc30a9fbdb6123dadbe2dbb89318dbd5ec01080a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Generalize iwl_pnvm_parse(). This saves us from copying each payload
twice (first in the parsing and later when copying it to the dram).
Moreover, its more compatible for handling larger pnvm tables in
the future (in which payloads won't be concatenated).
The main changes are:
1. Take out the concatenating of the payloads from the parsing level
2. Start using iwl_pnvm_image structure that will hold pointers to
payloads that should be delivered to fw, their sizes and number.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.06c02f380b6f.I03a3030fca194aa0c4bc2ecd18531f8914e98cfd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Indicate to the firmware for each station whether or not MFP
is used with this station. Note that we indicate MFP for it
before authorized since we don't know yet, and that will make
the firmware not handle should-be-protected management frames
without being able to check them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230601095201.b1052f39af4c.I1b46b751d5808e65ea3d0e7b8b38209c5aecf042@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's no peer configured then there's no point in sending
the command down to the firmware with an invalid peer address.
Fixes: cf85123a21 ("wifi: iwlwifi: mvm: support enabling and disabling HW timestamping")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194630.0fb9f81f1852.Idcc41b67d1fbb421e5ed9bac2177b948b7b4d1c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This warning is sometimes happening if we force a FW error
while disconnecting, which is annoying but harmless.
However, it's also pointless to throw a warning here, since
the stack and driver state doesn't really help, so just
remove that so the driver will ignore the error if any.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194630.29fe6990d372.I00ff5dc7bfb4025a609f380a0a3911d842b72449@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are mainly two types of BTM (BSS Transition Management)
requests, recommendations and notifications. For the first type,
a response is needed otherwise, most probably the STA will be
disconnected.
Since we don't want to wake up the host on it, set the BTM to reject
offload flag (if the device supports it) and rely on the FW to take
care of it. The FW will reject the BTM request and in case the AP
sends DEAUTH the FW can wake up the host to let it decide on the
next steps.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194629.d95ae6f2804c.I9457acc55bc23ce715c714b5088058f52540c224@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
DRAM buffers that are not defined in the TLVs (or are unused in the
preset) would cause a log message. To avoid confusion, skip processing
buffers with an invalid (i.e. uninitialized) DRAM path.
This further reduces the noise of the message in cases where it is
unlikely to be helpful. Also update a related debug log string to better
describe what is happening.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194629.ecae60cf2d7f.Ib44a94d4aeb55dbb2e52edea8b69a09bc0f722c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The feature is still disabled (depends on BROKEN), but
the code had a compilation error after one of the merges.
Fix that.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531085033.216028-1-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.fd9016f8f994.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Setting the station to -EBUSY was originally done under
this lock, and the comment still refers to it. But this
no longer happens because that was removed when DQA was
removed. Remove the leftover code as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.30048b1cd0fd.Ie2c2ff6fd7c6e3ebf5b736de350dc15515970792@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the following notifications and commands mac_id was replaced
with link_id:
* CANCEL_CHANNEL_SWITCH_CMD
* CHANNEL_SWITCH_START_NOTIF
* CHANNEL_SWITCH_ERROR_NOTIF
The logic around was not changed, so only adjust handling
mac/link id.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.6aa6e394f5fe.Ie9e78918511ca901f9f3966d774fa74a71a186e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware added new fields to be able to pass the link_id as the AP
knows it and the esr_transition_timeout.
For now, pass only the link_id since we don't have access to the
esr_transition_timeout yet.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.bf80ce717458.Icd4174911227c00cd12783fe1f517ae8097809b9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case the driver doesn't implement suspend or resume operations
on the transport layer, notify the driver's upper layer.
Otherwise, we might access d3_status uninitialized.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.0c55e0ca92f1.I6870fe1683215e65d3d036f9b576b03b7b7257be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When adding a PASN station, the non MLD API was used. This results
in assert when operating as MLD. Fix it to use the MLD API when
operating as MLD. For now, the default link is used for the added
station.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.7c35dccc8a12.I7bc78cd16d7c750f42fdd60e07e839a860d279d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new version of missed beacon notification uses link_id
instead of mac_id. Also add an option to use link id for
retrieving vif.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.17fe1cc632f1.Id1fabb532e2174712fe17d4ad86a2c8c64ae84da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
kmemdup() at line 2735 is not duplicating enough memory for
notif->tid_tear_down and notif->station_id. As it only duplicates
612 bytes: up to offsetofend(struct iwl_wowlan_info_notif,
received_beacons), this is the range of [0, 612) bytes.
2735 notif = kmemdup(notif_v1,
2736 offsetofend(struct iwl_wowlan_info_notif,
2737 received_beacons),
2738 GFP_ATOMIC);
which evidently does not cover bytes 612 and 613 for members
tid_tear_down and station_id in struct iwl_wowlan_info_notif.
See below:
$ pahole -C iwl_wowlan_info_notif drivers/net/wireless/intel/iwlwifi/mvm/d3.o
struct iwl_wowlan_info_notif {
struct iwl_wowlan_gtk_status_v3 gtk[2]; /* 0 488 */
/* --- cacheline 7 boundary (448 bytes) was 40 bytes ago --- */
struct iwl_wowlan_igtk_status igtk[2]; /* 488 80 */
/* --- cacheline 8 boundary (512 bytes) was 56 bytes ago --- */
__le64 replay_ctr; /* 568 8 */
/* --- cacheline 9 boundary (576 bytes) --- */
__le16 pattern_number; /* 576 2 */
__le16 reserved1; /* 578 2 */
__le16 qos_seq_ctr[8]; /* 580 16 */
__le32 wakeup_reasons; /* 596 4 */
__le32 num_of_gtk_rekeys; /* 600 4 */
__le32 transmitted_ndps; /* 604 4 */
__le32 received_beacons; /* 608 4 */
u8 tid_tear_down; /* 612 1 */
u8 station_id; /* 613 1 */
u8 reserved2[2]; /* 614 2 */
/* size: 616, cachelines: 10, members: 13 */
/* last cacheline: 40 bytes */
};
Therefore, when the following assignments take place, actually no memory
has been allocated for those objects:
2743 notif->tid_tear_down = notif_v1->tid_tear_down;
2744 notif->station_id = notif_v1->station_id;
Fix this by allocating space for the whole notif object and zero out the
remaining space in memory after member station_id.
This also fixes the following -Warray-bounds issues:
CC drivers/net/wireless/intel/iwlwifi/mvm/d3.o
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2743:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=]
2743 | notif->tid_tear_down = notif_v1->tid_tear_down;
|
from drivers/net/wireless/intel/iwlwifi/mvm/d3.c:7:
In function ‘kmemdup’,
inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12:
include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’
765 | return __real_kmemdup(p, size, gfp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2744:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=]
2744 | notif->station_id = notif_v1->station_id;
| ^~
In function ‘kmemdup’,
inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12:
include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’
765 | return __real_kmemdup(p, size, gfp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Link: https://github.com/KSPP/linux/issues/306
Fixes: 905d50ddbc ("wifi: iwlwifi: mvm: support wowlan info notification version 2")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/ZHpGN555FwAKGduH@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The rs_drv_get_rate flow reads the lq_sta to return the optimal rate
for tx frames. This read flow is not protected thereby leaving
a small window, a few instructions wide, open to contention by an
asynchronous rate update. Indeed this race condition was hit and the
update occurred in the middle of the read.
Fix this by locking the lq_sta struct during read.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.b52c9ed5c379.I15290b78e0d966c1b68278263776ca9de841d5fe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This bitmap equals to zero when in a non-MLO mode, and then we won't
be iterating on any link. Use for_each_sta_active_link() instead, as
it handles also the case of non-MLO mode.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.f32a8c08730a.Ib02248cd0b7f2bc885f91005c3c110dd027f9dcd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the firmware sends us a corrupted MCC response with
n_channels much larger than the command response can be,
we might copy far too much (uninitialized) memory and
even crash if the n_channels is large enough to make it
run out of the one page allocated for the FW response.
Fix that by checking the lengths. Doing a < comparison
would be sufficient, but the firmware should be doing
it correctly, so check more strictly.
Fixes: dcaf9f5ecb ("iwlwifi: mvm: add MCC update FW API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.d7b233139eb4.I51fd319df8e9d41881fc8450e83d78049518a79a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In iwl_mvm_mld_update_sta(), if the flow doesn't enter
for_each_sta_active_link(), the default value is returned.
Set this default to -EINVAL instead of 0 to better reflect
this.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.98b7e3aacf0b.I2fc274dd7e374ef7fac8e26d71c9cd73323da665@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
RCU protected fw_id_to_mac_id can be initialized with either
an error code or NULL. Thus, after dereferencing need to check
the value with IS_ERR_OR_NULL() and not only that it is not NULL.
Fix it.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.ec5f2880e81c.Ifa8c0f451df2835bde800f5c3670cc46238a3bd8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The DBGI dump is (unsurprisingly) of type DBGI, not SRAM.
This leads to bad register accesses because the union is
built differently, there's no allocation ID, and thus the
allocation ID ends up being 0x8000.
Note that this was already wrong for DRAM vs. SMEM since
they use different parts of the union, but the allocation
ID is at the same place, so it worked.
Fix all of this but set the allocation ID in a way that
the offset calculation ends up without any offset.
Fixes: 34bc27783a ("iwlwifi: yoyo: fix DBGI_SRAM ini dump header.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.19a302ae4c65.I12272599f7c1930666157b9d5e7f81fe9ec4c421@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Lockdep points out that we can deadlock here by calling
cancel_delayed_work_sync() because that might be already
running and gotten interrupted by the NAPI soft-IRQ.
Even just calling something that can sleep is wrong in
this context though.
Luckily, it doesn't even really matter since the things
we need to do are idempotent, so just drop the _sync().
Fixes: e5d153ec54 ("iwlwifi: mvm: fix CSA AP side")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.b1813c823b4d.I9d20cc06d24fa40b6774d3dd95ea5e2bf8dd015b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't need to (and shouldn't) initialize the spinlock
during HW restart that was already initialized, so move
that into the correct if block. Since then we have two
consecutive if statements with the same (though inverted)
condition, unify those as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.221c22cfdf4e.I2e30113ef4bd8cb5bd9e1a69e52a95671914961c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some assertions in the STA removal code that can
fail, and in that case we may leak memory since we skip
the freeing.
Fix this by freeing the dup_data earlier in the function,
we already have a check for when we free the station, and
this we don't need to do it with and without MLD API, so
it's a win all around.
Fixes: a571f5f635 ("iwlwifi: mvm: add duplicate packet detection per rx queue")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.173938681d72.Iff4b55fc52943825d6e3e28d78a24b155ea5cd22@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This feature depends on a platform bugfix. Until we have a
mechanism that can verify a platform has the required bugfix,
disable RFI.
Fixes: ef3ed33dfc ("wifi: iwlwifi: bump FW API to 77 for AX devices")
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Link: https://lore.kernel.org/linux-wireless/CAAJw_ZvZdFpw9W2Hisc9c2BAFbYAnQuaFFaFG6N7qPUP2fOL_w@mail.gmail.com/
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
trans_pcie->rba.alloc_wq only hosts a single work item and thus doesn't need
explicit concurrency limit. Let's use the default @max_active. This doesn't
cost anything and clearly expresses that @max_active doesn't matter.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Avraham Stern <avraham.stern@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mordechay Goodstein <mordechay.goodstein@intel.com>
Cc: "Haim, Dreyfuss" <haim.dreyfuss@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
When CSME takes ownership, the driver sets RFKILL on, and this
triggers driver unload and sending the confirmation SAP message.
However, when IWL_MVM_MEI_REPORT_RFKILL is set, RFKILL was not
reported and as a result, the driver did not confirm the ownership
transition. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.29ac3cd3df73.I96b32bc274bfe1e3871e54d3fa29c7ac4f40446f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the host disconnects from the AP CSME takes ownership right away.
Since the driver never asks for ownership again wifi is left in rfkill
until CSME releases the NIC, although in many cases the host could
re-connect shortly after the disconnection. To allow the host to
recover from occasional disconnection, re-ask for ownership to let
the host connect again.
Allow one minute before re-asking for ownership to avoid too frequent
ownership transitions.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.a6c6ebc48f2d.I8a17003b86e71b3567521cc69864b9cbe9553ea9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When mei filtered scan is performed, it must find the AP on the first
scan, otherwise CSME will take the ownership of the NIC.
Make this scan more aggressive by scanning the channel the AP is
supposed to be on (as reported by CSME) several times.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.47e383b10b18.I14340a118acdb19ecb7214e7ff413054c77bd99c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When CSME is connected and has link protection set, the driver must
connect to the same AP CSME is connected to.
When in link protection, modify scan request parameters to include
only the channel of the AP CSME is connected to and scan for the
same SSID. In addition, filter the scan results to include only
results from the same AP. This will make sure the driver will connect
to the same AP and will do it fast enough to keep the session alive.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.c1b55de3d704.I3895eebe18b3b672607695c887d728e113fc85ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we do get multiple notifications from firmware, then
we might have allocated 'notif', but don't free it. Fix
that by checking for duplicates before allocation.
Fixes: 4da46a06d4 ("wifi: iwlwifi: mvm: Add support for wowlan info notification")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.116758321cc4.I8bdbcbb38c89ac637eaa20dda58fa9165b25893a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The RADA/firmware collaborate on MIC stripping in the following
way:
- the firmware fills the IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK
value for how many words need to be removed at the end of
the frame, CRC and, if decryption was done, MIC
- if the RADA is active, it will
- remove that much from the end of the frame
- zero the value in IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK
As a consequence, the only thing the driver should need to do
is to
- unconditionally tell mac80211 that the MIC was removed
if decryption was already done
- remove as much as IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK says
at the end of the frame, since either RADA did it and then
the value is 0, or RADA was disabled and then the value is
whatever should be removed to strip both CRC & MIC
However, all this code was historically grown and getting a
bit confused. Originally, we were indicating that the MIC was
not stripped, which is the version of the code upstreamed in
commit 780e87c29e ("iwlwifi: mvm: add 9000 series RX processing")
which indicated RX_FLAG_DECRYPTED in iwl_mvm_rx_crypto().
We later had a commit to change that to also indicate that the
MIC was stripped, adding RX_FLAG_MIC_STRIPPED. However, this was
then "fixed" later to only do that conditionally on RADA being
enabled, since otherwise RADA didn't strip the MIC bytes yet.
At the time, we were also always including the FCS if the RADA
was not enabled, so that was still broken wrt. the FCS if the
RADA isn't enabled - but that's a pretty rare case. Notably
though, it does happen for management frames, where we do need
to remove the MIC and CRC but the RADA is disabled.
Later, in commit 40a0b38d7a ("iwlwifi: mvm: Fix calculation of
frame length"), we changed this again, upstream this was just a
single commit, but internally it was split into first the correct
commit and then an additional fix that reduced the number of bytes
that are removed by crypt_len. Note that this is clearly wrong
since crypt_len indicates the length of the PN header (always 8),
not the length of the MIC (8 or 16 depending on algorithm).
However, this additional fix mostly canceled the other bugs,
apart from the confusion about the size of the MIC.
To fix this correctly, remove all those additional workarounds.
We really should always indicate to mac80211 the MIC was stripped
(it cannot use it anyway if decryption was already done), and also
always actually remove it and the CRC regardless of the RADA being
enabled or not. That's simple though, the value indicated in the
metadata is zeroed by the RADA if it's enabled and used the value,
so there's no need to check if it's enabled or not.
Notably then, this fixes the MIC size confusion, letting us receive
GCMP-256 encrypted management frames correctly that would otherwise
be reported to mac80211 8 bytes too short since the RADA is turned
off for them, crypt_len is 8, but the MIC size is 16, so when we do
the adjustment based on IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK (which
indicates 20 bytes to remove) we remove 12 bytes but indicate then
to mac80211 the MIC is still present, so mac80211 again removes the
MIC of 16 bytes, for an overall removal of 28 rather than 20 bytes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.81345b6ab0cd.Ibe0348defb6cce11c99929a1f049e60b5cfc150c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix a memory leak that occurs when reading the fw_info
file all the way, since we return NULL indicating no
more data, but don't free the status tracking object.
Fixes: 36dfe9ac6e ("iwlwifi: dump api version in yaml format")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.239e501b3b8d.I4268f87809ef91209cbcd748eee0863195e70fa2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A received TKIP key may be up to 32 bytes because it may contain
MIC rx/tx keys too. These are not used by iwl and copying these
over overflows the iwl_keyinfo.key field.
Add a check to not copy more data to iwl_keyinfo.key then will fit.
This fixes backtraces like this one:
memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16)
WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017
RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Call Trace:
<TASK>
iwl_set_dynamic_key+0x1f0/0x220 [iwldvm]
iwlagn_mac_set_key+0x1e4/0x280 [iwldvm]
drv_set_key+0xa4/0x1b0 [mac80211]
ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211]
ieee80211_key_replace+0x22d/0x8e0 [mac80211]
<snip>
Link: https://www.alionet.org/index.php?topic=1469.0
Link: https://lore.kernel.org/linux-wireless/20230218191056.never.374-kees@kernel.org/
Link: https://lore.kernel.org/linux-wireless/68760035-7f75-1b23-e355-bfb758a87d83@redhat.com/
Cc: Kees Cook <keescook@chromium.org>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For MLO support, use the pointer to the peer MLD instead of the default
link station id, since the default link is only used for non-MLO cases.
Using the default link sta id is meaningless for MLO. Also remove the
rcu protected section since we now avoid the lookup based on sta id.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.40cef48c0592.I8dd666d603d6e1854033e5369c70e78d9303d236@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the AP station already exists on link activation (which
means we're during link switch), configure the TLC in FW so
we can immediately transmit once the link is activated.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.1a93de9b7c1f.I42022f24bbe3572f5a082da8c99794ae14281875@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For MLO, we cannot use vif->bss_conf.chandef.chan->band, since
that will lead to a NULL-ptr dereference as bss_conf isn't used.
However, in case of real MLO, we also need to take both LMACs
into account if they exist, since the station might be active
on both LMACs at the same time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.3588afc85d79.I11592893bbc191b9548518b8bd782de568a9f848@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Track instead whether or not the station was authorized, that's
clearer than trying to indicate in the code whether or not the
full bandwidth should be used via an 'update' argument.
While at it, give rs_fw_rate_init() the iwl_mvm_ prefix.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.92bd8d36e311.I1877a109104d5ffeaaad6a623e89f0c44decc38e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When allocating a new link station, initialize the ratescaling
data for it. To do that, refactor the initialization code out
into a new iwl_mvm_rs_add_sta_link() function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.441b6a8c60fd.I34f1b3555c25aaa22cc34d1112fc3b6393a20b7c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We need to look up the correct version of this struct depending
on the interface type, rather than just checking if the pointer
is non-NULL. Fix that.
Fixes: befebbb30a ("iwlwifi: rs: consider LDPC capability in case of HE")
Fixes: b009cf71a9 ("iwlwifi: mvm: only enable HE DCM if we also support TX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.1fd54368a02c.Ie4db5e8ae224d9a4a63b528da5d63e1b957b9cef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since only clients to an AP can be 20MHz-only STAs, adjust the
code to not make the use of EHT capabilities depend on only the
bandwidth, but also the type of interface.
Fixes: 701404f109 ("wifi: iwlwifi: rs: add support for parsing max MCS per NSS/BW in 11be")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.a3a4c931e4a3.I693a07f4d88044c889eee04793883a83bc5ee362@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When this is called it might crash due to the use of
deflink's phy context, update all links instead. It
really shouldn't be called right now though, but it's
better to have safer code until we update this to be
with a link parameter.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.fd47d0de8319.I87c5e5bcb2fadd70acc32021eed394fc1eea12a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we first add the STA before sending an authentication
frame this is false. However, in some cases such as FT or
certainly in MLO link switch scenarios, it will be true.
If it happens to be true, it causes a firmware assert (in
LMAC, 0x2528), because the same bit is used by the firmware
for tracking this setting as well as for tracking if the
management key has been installed, and then we get this
assert from the firmware when installing the MFP key as it
thinks it has already been installed.
Remove the setting for now, until the firmware disentangles
the two. We should be able to set it, in fact we should be
setting it speculatively before authentication/association,
to avoid processing management frames that should have been
protected/encrypted before the key is set.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.adbeb0e0bfed.I400d0ee3721dc4f294313be992d277ba4d9c88d9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A long time, ago in commit 818965d391 ("cfg80211: Allow a
scan request for a specific BSSID"), the stack started passing
the BSSID that should be scanned for. Use it in iwlwifi for the
intended optimisation, and to also allow the use of this for an
implementation sending multi-link probe requests.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.0be90360cad7.If279c28079a1db34280a824cee7c3f6545fd8b9e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we didn't reset t to 0, only the first iteration of the loop
did checked the ready bit several times.
From the second iteration and on, we just tested the bit once and
continued to the next iteration.
Reported-and-tested-by: Lorenzo Zolfanelli <lorenzo@zolfa.nl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216452
Fixes: 289e5501c3 ("iwlwifi: fix the preparation of the card")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.615b683ab9c8.Ic52c3229d3345b0064fa34263293db095d88daf8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newer firmware images have a TLV advertising how many
beacons they support, use that to permit adding more
links in AP mode (FW needs to support at least as many
links as beacons).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.0d7522533557.Ic6b5992e94446c35cb0f3add019defa6e7aded2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we switch station links, also add the code to switch
BAIDs from one station mask to the new one.
To do so, refactor the switching code a bit to have common
code for all the needed switches; will add keys next.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.40654afce24f.I0e35151f69e7513be53ddb8f008e9ab48278c352@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we have MLO connections, a BAID applies to multiple
firmware stations. Track the station mask instead of the
station ID, getting rid of a few more deflink cases and
preparing for handling link switching for BAIDs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.c08523808c34.I719b7bba499648d1495ed3e3a90889d4732ef15d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The initiator smooth list is initialized only in iwl_mvm_up(), but is
cleared in iwl_mvm_mac_stop. This may result in iterating over the
list before it was initialized in case iwl_mvm_up() failed early.
Fix it by moving the list initialization to an earlier stage.
Fixes: b68bd2e314 ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.b50b1fe9a576.Ie348ffae110612d2e252ac120a3ba0aea063b1b6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We are going to need this in more places than just the
key code, so factor out the functionality of getting
the FW station ID mask (filtered to a specific link if
needed) to a separate function that can now be called
both under RCU and mvm->mutex protection.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.eff92b93025d.I2c50290a0537d5db3d3460f4d57c78a4712ffb75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware split the HE support field into HE and "pseudo HE",
the latter is really for AP and doesn't implement trigger frame
handling for example.
Use the new field for AP mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.34dbfefe2a49.I0e39cd35dbe03ff9209b26733746479eae1c8966@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The usage of the 'dtim_period' value was wrong, as it is only
a multiplier of the beacon interval, and thus, beacon interval should
also be considered. Fix it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.e08293d6cace.I25f8cea3189472bd714676ca38b121d7c60fb9d9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In iwl_mvm_mac_ctxt_get_lowest_rate() we were still accessing
vif->bss_conf without any multi-link provisions, and also the
info->band, both of which isn't valid in MLO.
Fix the code to look at the correct link. In case of EAPOL
transmissions for the initial 4-way-HS, look up the correct
link here as well, and warn if multiple are active.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.d892f68d3bcd.I7d6927abeea5c3899db225391dbc6a5c77805e80@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When rx/tx queues are being freed, on a different CPU there could be
still rx flow running. Call napi_synchronize() to prevent such a race.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20230416154301.5171ee44dcc1.Iff18718540da412e084e7d8266447d40730600ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The if statement here is misleading, we return zero anyway
since we just checked the 'ret' variable, simplify the code
to remove the condition entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.57c1eb58e655.I1b47a7771cd66306931089c150c6b5b240bdcba5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The setting of the rate used for non station cases did not take into
consideration the interface type etc., thus when probe responses
are transmitted on P2P Device interface etc. CCK rates were used
which is not allowed.
Modify the code so the non station case would consider the
interface type etc. For HWs/FWs that do not support rate control,
preserve the previous behavior, i.e., take the rate from the
skb metadata and adjust as needed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.fa0e4d42205d.Iab4784560c77b965fec070d4d0a1ec84171d94ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we have MLO, then the deflink.ap_sta_id cannot be used.
However, we can use the new mvmvif->ap_sta pointer for the
validation instead.
Also don't do it multiple times for different FW instances
of the same AP STA (TDLS STAs are only on a single link).
Note that this isn't really working right yet since the
underlying flush code hasn't been updated yet to know of
multiple link STAs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.7d747df44d65.Ie5392859fab4cfb73c20b49bfee2caadef5fd8ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the full STA mask and selecting the correct link
for key installation.
While at it, catch errors if this function returns a bad
zero station mask, rather than waiting for the firmware to
crash on it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.cedae2f21829.Iae07b736c3109d085ad5b74ec8282ce45020da39@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of relying on the AP STA ID and dereferencing our
firmware -> mac80211 STA array when we really only need
the STA, not the per-link information (and might not have
it, e.g. for a pairwise key installation where this is
relevant), keep track of the AP STA as a pointer to the
mac80211 STA, protected by the mutex. Then use it here in
the key code instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.7db01b1508de.I88e6d252cdb0a6e4581d7c5fd7cbc037b4fd40ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
An integer overflow occurs in the iwl_write_to_user_buf() function,
which is called by the iwl_dbgfs_monitor_data_read() function.
static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count,
void *buf, ssize_t *size,
ssize_t *bytes_copied)
{
int buf_size_left = count - *bytes_copied;
buf_size_left = buf_size_left - (buf_size_left % sizeof(u32));
if (*size > buf_size_left)
*size = buf_size_left;
If the user passes a SIZE_MAX value to the "ssize_t count" parameter,
the ssize_t count parameter is assigned to "int buf_size_left".
Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a
negative number, so "*size" is assigned "buf_size_left" and goes into
the third argument of the copy_to_user function, causing a heap overflow.
This is not a security vulnerability because iwl_dbgfs_monitor_data_read()
is a debugfs operation with 0400 privileges.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.2d80ace81532.Iecfba549e0e0be21bbb0324675392e42e75bd5ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clang static analysis reports this representative issue
dbg.c:1455:6: warning: Branch condition evaluates to
a garbage value
if (!rxf_data.size)
^~~~~~~~~~~~~~
This check depends on iwl_ini_get_rxf_data() to clear
rxf_data but the function can return early without
doing the clear. So move the memset before the early
return.
Fixes: cc9b6012d3 ("iwlwifi: yoyo: use hweight_long instead of bit manipulating")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.872a7175f1ff.I33802a77a91998276992b088fbe25f61c87c33ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clang static analysis reports this issue
d3.c:567:22: warning: The left operand of '>' is
a garbage value
if (seq.tkip.iv32 > cur_rx_iv32)
~~~~~~~~~~~~~ ^
seq is never initialized. Call ieee80211_get_key_rx_seq() to
initialize seq.
Fixes: 0419e5e672 ("iwlwifi: mvm: d3: separate TKIP data from key iteration")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.6dd372f84f93.If1f708c90e6424a935b4eba3917dfb7582e0dd0a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add RF step id handling and handle for BZ device.
Read CNV Aux register and uses for no OTP case.
Add missing rf support for Bz/Bnj device and correct/add
the mapping for rf-type if OTP not present.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.8f2e2fff7bbc.Iee5554178bc5f134dcc28591db0968e619afbdca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of UHB scan that follows a scan on legacy bands,
consider both scan commands as part of the same scan cycle,
and thus configure them to use the same antenna configuration.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.fd582c423ad8.I35239f94cb3ee1642d16936199c336a07ec2df8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't allow buffer allocation TLV with zero req_size since it
leads later to division by zero in iwl_dbg_tlv_alloc_fragments().
Also, NPK/SRAM locations are allowed to have zero buffer req_size,
don't discard them.
Fixes: a9248de424 ("iwlwifi: dbg_ini: add TLV allocation new API support")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.5d6688ed74d8.I5c2f3a882b50698b708d54f4524dc5bdf11e3d32@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When NIC is in a bad state, reading data will return 28 bits as
0xa5a5a5a and the lowest 4 bits are not fixed value.
Mask these bits in a few places to skip the dump correctly.
Fixes: 89639e06d0 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.df6c0663179d.I36d8487b2419c6fefa65e5514855d94327c3b1eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is possible that iwl_pci_probe() will fail and free the trans,
then afterwards iwl_pci_remove() will be called and crash by trying
to access trans which is already freed, fix it.
iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2
wfpm id 0xa5a5a5a2
iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2
...
BUG: kernel NULL pointer dereference, address: 0000000000000028
...
RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi]
pci_device_remove+0x3e/0xb0
device_release_driver_internal+0x103/0x1f0
driver_detach+0x4c/0x90
bus_remove_driver+0x5c/0xd0
driver_unregister+0x31/0x50
pci_unregister_driver+0x40/0x90
iwl_pci_unregister_driver+0x15/0x20 [iwlwifi]
__exit_compat+0x9/0x98 [iwlwifi]
__x64_sys_delete_module+0x147/0x260
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.082f6e21341b.I0db21d7fa9a828d571ca886713bd0b5d0b6e1e5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver is using the dump name generated first time in all
generated dump in case of NMI.
The validity of dump name should be with each dump created
and need to reset after each use.
Fixes: 834f920ef3 ("wifi: iwlwifi: yoyo: Add driver defined dump file name")
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.6c987f820557.I924f2eae1eef2fe82c7a23be566551653d46f729@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On 22000 and AX210 devices, there's a ROM bug that causes it to
set invalid LTR settings. On 22000 and AX210 non-integrated we
can fix up these settings from the driver (as done in the code
here), but on AX210 integrated these registers are not available
to the driver.
Attempt to work around the issue by spinning while the IML is
being loaded, the IML will then reprogram the LTR values itself
after it's loaded, so only the brief IML load (which the ROM is
doing) is affected.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.aaa0a4339984.If08da23e960b6236f8c05c06fc8b26041ac89f1e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
beacon_inject_active turns true and false via debugfs when we inject a
beacon. During the time of the beacon injection we can't configure the
FW with a beacon cmd. If we have a hw restart during the beacon injection
then in the recovery flow we will not be able to configure the beacon
cmd to the FW. Fix this by cleaning up this variable after an hw restart.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.b021bce5e162.Ia5a0a0b5d8734f63077ceaac936176a345f8d3d1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As part of version 2 we don't need to have wake_packet_bufsize
and wake_packet_length. The first one is already calculated by the driver,
the latter is sent as part of the wake packet notification.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.3b53213b10d4.Ibf2f15aca614def2d262dd267d1aad65931b58f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When secure LTF is not used, the HLTK is not derived during the PASN
authentication. Make the HLTK optional when adding a PASN station.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.a57f7f3b59bd.Ifa88afb51a2516156153ac321d81556e295036c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to hardware limitations when splitting up A-MSDUs, it
cannot handle an arbitrary number of MSDUs per A-MSDU. Set
the bits to ask transmitters to send only 8 MSDUs in one
A-MSDU.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.e6c518f2724f.I15c13d13b38289edbcd64f67d57cf18f6026457a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The aux queue is initialized to IWL_MVM_INVALID_QUEUE. This is
later used for a bitmask of the queue, which results in a
shift-out-of-bounds. Fix it.
Fixes: b85f7ebb24 ("wifi: iwlwifi: mvm: avoid UB shift of snif_queue")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.c41a33c32898.Idc15f9eed005345a4137c28ef62efd80a405fad0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Starting from version 4 of ANT_GAIN_CMD verification of ppag table
values is done by the FW. Driver has to send the complete table as
it appears in the BIOS. Make this change.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.a965365e2336.I1081f00ae309d9225d0529fa2da6ba7e34a8bd4f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MCAST frames are filtered out by the driver if we are not
authorized yet.
Fix it to filter out only protected frames.
Fixes: 147eb05f24 ("iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.9cedcc27db60.I8fb7057981392660da482dd215e85c15946d3f4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add debug print for different FW program counter details of
different CPU. Program counter pc details will be read from
TLV during init.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.862790d336a9.I34e2ea05a79e8b2552f7f221bacf3af0166cb9c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The checks of whether or not a frame is bufferable were not
taking into account that some action frames aren't, such as
FTM. Check this, which requires some changes to the function
ieee80211_is_bufferable_mmpdu() since we need the whole skb
for the checks now.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the IPC registers are used for sleep control, setting
the IPC sleep bit already triggers an interrupt to the fw, so
there is no need to also set the doorbell. Setting also the
doorbell triggers the sleep interrupt twice which lead to
an assert.
Fixes: af08571d39 ("iwlwifi: pcie: support Bz suspend/resume trigger")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.b5f2f6e44d38.I4cb5b6ad4914db47a714e731c4c8b4db679cabce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PHY configuration command need to be sent to FW if the tx diversity
with SISO is supported.
This need to be sent to get the init notification from FW.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.c2121c8694a7.Ibee3dd8765ef4b7504660fa228a7c7eff78920af@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Max A-MPDU length exponent shall be set to 2 for EHT capable
device on 6GHz band in order to support 4MB aggregation.
Update HE MAC capabilities accordingly for station and softap
interfaces.
This change requires to add another ieee80211_sband_iftype_data for
uhb since high/uhb are no longer the same.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.1eee32cfd199.I9c5ff3a6956d509137deca620814935149516fbc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since Gl A-step devices use the old checksum hardware,
we shouldn't use the Bz code to check for A-MSDU
combining ability; fix that.
Fixes: ec18e7d4d2 ("wifi: iwlwifi: mvm: use old checksum for Bz A-step")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.8c445b943fee.Ibf772102ca712f59e2ee0cdd4c344011fcf445aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On queue remove, we should convert the TID value to the
firmware value (8 -> 15) just like we do on queue add.
Otherwise, the firmware will not be able to find the
correct queue to remove.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.6651077eaec3.Ia6868c8fc1a92063609bb057b6a618726712d0bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
update the device configuration for HR1 device for SO and SOF device.
QuZ device configuration is corrected to support specific CRF.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.86f08520323f.Ieccb50de47f877b85732000a0d67b645eeeb0c2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function receives the queue id to reclaim packets from. Currently
we're passing to it the queue id we received from the FW in the flush
response. We don't do any check of this value and it might be invalid.
In such case we will refer to a pointer to a queue which might be NULL.
Fix this by adding a validity check of the queue id before using it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.a9c3fd32bce7.I5fbdcf3b1b80eb96a907116c166f19dc0aae7cb8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In __iwl_err(), if we rate-limit the message away, then
vaf.va is still NULL-initialized by the time we get to
the tracing code, which then crashes. When it doesn't
get rate-limited out, it's still wrong to reuse the old
args2 that was already printed, which is why we bother
making a copy in the first place.
Assign vaf.va properly to fix this.
Fixes: e5f1cc98cc ("iwlwifi: allow rate-limited error messages")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.e27134c6bcd4.Ib3894cd2ba7a5ad5e75912a7634f146ceaa569e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There're two identical entries for ax1650 device in
iwl_dev_info_table. Remove one of the duplicate entries.
Fixes: 953e66a723 ("iwlwifi: add new ax1650 killer device")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230410140721.897683-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
clang with W=1 reports
drivers/net/wireless/intel/ipw2x00/ipw2200.c:381:19: error:
unused function '_ipw_read16' [-Werror,-Wunused-function]
static inline u16 _ipw_read16(struct ipw_priv *ipw, unsigned long ofs)
^
This function and its wrapping marco are not used, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230319135418.1703380-1-trix@redhat.com
There are a few merge conflicts due to overlapping
fixes and changes, merge wireless/main to fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function can be invoked for both MLO and non-MLO, so
it must deal with multi-link correctly. Notable, on auth
timeout, we'd otherwise get a warning due to the erroneous
deflink usage in MLO cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.b85f6052d51a.Iedfef4b4c4f3ca557aebc0093fdc3f5cfb49b507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The link management queues associated with the broadcast stations
were forgotten and so the same queue was used with both broadcast
stations. This leads to lost frames and warnings on cleanup and
HW restart.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.0671fa976832.Id5aa9856fd5984e447f247e6d0c3979d9794a21a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the MLD code, we free probe_resp_data before we remove
the MAC from the firmware, so we might receive another one
from the device after freeing, and thus might leak it. Fix
that by moving the free later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.152b1715fc13.Ibd37fed1b24cd25012923ad9170d1fe33ab35c5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This field is used only for host TLC, so it can reside inside
the corresponding lq_sta struct. Also, TLC lq_sta is cleared
in iwl_mvm_rs_rate_init() upon association, but max_agg_bufsize
is set earlier in iwl_mvm_sta_init(). Thus, place this field
in the persistent part of lq_sta to retain its value.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.d55361064e39.Ib79d30f27d94607d097f0192af2aacd455a17958@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
By using the internal station add the station is installed in
firmware with zeroed MAC addresses, which is wrong. Use the
full installation function instead, to fill all data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.62d5371bb3c7.Ie25b62125a3a022f76a36bae5fed9796c18698aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove the station, we call iwl_mvm_sta_del() which
returns true if we cannot remove it from the firmware yet,
which happens if this is the station ID for the AP station
that's still used because the MAC is still associated.
However, we still must free the link data as the station is
only kept alive in the firmware, in mac80211 and driver the
data structures are destroyed.
To fix that, we need to make iwl_mvm_mld_free_sta_link()
track whether or not the station is still alive in FW, as
otherwise we might reuse the station ID in the meantime and
iwl_mvm_mld_rm_sta_from_fw() would reject the later delete
from the firmware. Add an argument to it for that. Then we
can use the return value of iwl_mvm_sta_del() for that to
fix the issue, and call iwl_mvm_mld_rm_sta_from_fw() only
if we need to not keep the station in FW.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.1d81d4c71f35.I8fc60ac28ffc1147e9b1250e5e6237b3cb5516ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the new macros from mac80211 that do lockdep checking
on the RCU dereferences, instead of hard-coding 1 as the
argument to rcu_dereference_protected().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.112df5c8dec2.I1a1008f5566e509953d988f254d15c9e58630418@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During link switching there might be a link that's marked
active but has no chanctx assigned (so it's not active from
our driver's POV), skip such links in power recalculation
without any warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c629090bd5d2.If7a680d5e349d454f2122f936c21522b9528a55f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we change only idle, avoid sending the MAC context
command since it doesn't depend on idle state. This
also fixes an issue with the firmware because without
this we send the command during link switching, as we
just deactivated the first link, and we cannot send
this command when there's no active link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.f5218f8453ec.I1325ff14ec07a27dd7ea2c1c210a1721d969839f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove the AP station, we iterate over the links
and remove all the keys, however, the key iteration will
return all keys for all links, so skip the ones that we
don't need based on the link ID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.e724878f502e.I66870d4629244b4b309be79e11cbbd384bdf93be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a fw_id_to_link_sta array in mvm to track the link
STA for each firmware station ID, and then use that to
report the link a frame was received on (since we know
the station ID from firmware).
Notably, this fixes beacon tracking for the correct link
since mac80211 now queues and processes those on the one
link identified by the link ID only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c7dd3ec18077.I12ef9eb4a5b8b5c2b9d6bcaa1fda73b59eba39d8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For management frames sent by an AP interface, translate
the MLD addresses to LINK addresses (for an MLD AP).
AP (non-bufferable) management frames are sent via
the broadcast station so the translation cannot be
done by the firmware.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.3cb4292f51e8.Ia662c00ff271c70eda927c12ed49b045b1eb8489@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add/removed from iwl driver and firmware station links.
Update the station queues accordingly (which station links
are connected to the station queues).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.156d1aae5de1.I32973141be1190222169879f8caf7038c1a8f769@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the deflink.addr with the proper link address
for setting the peer_link_address in the station command.
For a non-MLD station, it will be the deflink.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.03ab287da0ae.I88fb5ab4e3ea9c886a3fac7ce09c4791469c3c8e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It has to be done per link. We still don't support keys
configuration for several links, but the single vif link can
still point to a link different from deflink. For now handle
the removal of keys for the default link.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.19d729cc4654.I4ebe8e3eb5fc00a994761f7c0ad40107382705ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We're hitting these while starting to enable MLO in the
driver, but getting them each and every time isn't very
useful one way or the other. Make these warnings trigger
only once.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.f333741d3dcf.If063d4cfe8a583f0f980a1b0ae4e63e17ba4ddc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Iterate all the links here and check which ones are active,
then adjust them accordingly.
This is still wrong as far as the RSSI event is concerned
(calling iwl_mvm_bt_coex_enable_rssi_event) since we call
that now multiple times, which could overwrite the data;
we need to either make that per link or call it only once,
but need to sort out first what the firmware will be doing
for beacon filtering/beacon abort in MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.fe813fd8de5d.I216236717876510e51e4c21c7fac7691925443f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is more of a workaround, with MLO we can get here with
the deflink not assigned. It's not critical right now that
we have this right, so WARN_ON_ONCE() and don't crash until
we can fix this area of the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.2b0d31bdb60b.I39d23c76eec16ac49f6ae3a6d5f7652041bde855@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For now we only support a single link, so just use the
deflink's address for the link address, instead of the
STA's (MLD) address, but use the link address anyway
in order to facilitate MLO connections.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c853c8ced3ba.I2e1915d1090c526e6a4c718440b45a7192bbbb03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With newer MLD firmware API we no longer need beacon timing
information from the host, so disable TIMING_BEACON_ONLY.
If MLO is enabled (currently only for testing), then we must
not have DEAUTH_NEED_MGD_TX_PREP because mac80211 doesn't
support it yet, we'll have to fix that later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.28ec631487bf.I6eb27c3d4c0289a5ec3682f573aae3424f45619f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the link change ops for links and stations.
Note that the stations one is empty for now as we only
have support for a single link so far, and then the
stations are created with the first link as deflink by
mac80211, so right now we don't really need anything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.6186c5a37e99.Ifd00d3ee93356ddef273aa18f1e081cd8f2c84ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
vif->bss_conf is used in this function only when TLC is not offloaded,
so not in MLO flow. Simplify the related "if" condition and call
iwl_mvm_hwrate_to_tx_status() only for driver rate scale.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.c6826d5b5477.Ib56ec6025c0da3a381aaf88e71085ce9b96a9e65@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver uses link_id as an index in the array. FW currently can
support only 2 concurrently active links per vif with the ids in the
range 0-3. Add a mapping of dirver link ids to fw link id and track the
number of active link ids.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.a53e5df49c33.I02b25648d2d5ca370c0697bf19d0d34724eae8a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These are two new handlers for MLO. As the configurations done in
bss_info_changed() are now split into two separate flows, use MLO
specific implementation instead of common functions with the non-MLO
code.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.7b238cae0895.Ieb87f204787fb1c7cb7562e1cbf54ef518d87123@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In newer firmware APIs the firmware is responsible for tracking
the DTIM period and other beacon timing, so we don't need to
wait with setting associated. In real MLO operation, mac80211
isn't tracking this anyway, and connections wouldn't work.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.02354241fede.Id957bed3851fdf1fe902d79a1b0338c6d80bc0e1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware now allows adding a link that's not yet bound
to a PHY context. Make use of that to align the driver with
mac80211's API expectations. For now, just add the link at
the same time as the MAC since we don't yet have real MLD
support, but that'll obviously change later. This fixes an
issue with apStaId tracking in the firmware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.097e5008b637.I4e75c6c11e21c08d28ff6a066be36629d3975db6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
HE/EHT support is reported to FW if there's at least one link
that supports it. Configure beacon separately for each link.
Don't send the beacon template before adding the MAC.
Co-developed-by: Johannes Berg <johannes.berg@intel.com>
Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.5ef4efeda2dd.I6ebda2b71c964b9aa63240c9fa1ee0d28099fe6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The LINK cmd host api has been updated. Align the driver to the
new changes. Also, temporary use mac_id for link_id.
Using the phy_id as the link_id is wrong since we might have 2 macs
operating on the same phy - in this case we will have 2 different
links (one for each mac) with the same link_id. On the other hand,
since we don't have MLO implemented yet, we won't have 2 different
links of the same mac. Therefore, we can use the mac_id as the
link_id.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.78ae716884fe.Icfeb2794d9652baaccf9b0cdddbd751d0db4f952@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently we're setting the sta->addr as the peers address only if
the iftype is NL80211_IFTYPE_AP, otherwise we are setting the bssid to
be the addr. This causes bugs in TDLS. Fix this by always using the
sta->addr.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.4c104c3074c4.I78912bb85251033e60db99a65165890779203612@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During CSA the PHY used by the link is changing, So the driver
needs to modify the links phy to the FW. Currently the driver is doing
it by removing the link and adding a new one with the new phy_id, but the
FW expects the link only to be modified. Fix this by modifying the links
phy_id instead of removing it and adding a new one
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.c07ca7aace29.I4ed5c77f4afe1b5da19322734e2f84d51aa541ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The patch linked below fixes the crash on queue removal bug only
for the non-MLD API. Do the same for the MLD API.
Fixes: c5a976cf6a ("wifi: iwlwifi: modify new queue allocation command")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.527dace26147.Ia215df5833634f95688a979f39fae70c1ac4e027@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This bitmap indicates what fields of the cmd got changed.
A field will be ignored by the FW if the corresponding flag wasn't set.
There are a few cases in which we currently set the wrong bits when
sending this cmd, which caused FW asserts. Fix this by setting the
correct bits in each case.
Fixes: 1ab2663233 ("wifi: iwlwifi: mvm: Add an add_interface() callback for mld mode")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.19ddbee0c98d.I595abb79d0419c9a21e5234303c2c3fd5290a52a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
