If iwl_mld_change_vif_links failed to add the requested link(s)
because the FW is dead (error before recovery), there is no point
in returning an error value, as the reconfig will re-add the link(s)
after the FW is started.
Return 0 in that case, and WARN in the others.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250430151952.c549c72b1f37.I445bf723e9befc9541b4abd0ec7c72db8f1ff177@changeid
When BT is ON, EMLSR with one of the links operating on 2.4 GHz
is allowed only if it meets following conditions.
In this patch:
1. during link selection, when BT is ON, allow emlsr only if BT
pentalty is < 7%.
2. exit EMLSR if BT is turned ON and one of the links is operating
on 2.4 GHz with BT penalty > 7%
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.d30212ec3901.I48e3d5bd6b0b8583f98057c38d2ee30fff5abd8a@changeid
Generalize and extend the link pair tests to not just do
channel load checks, but generally check link pairs. To
enable more accurate checking, return the reasons bitmap
from iwl_mld_valid_emlsr_pair() and therefore rename it
to iwl_mld_emlsr_pair_state.
It's also necessary now to add more chandefs, and while
doing so fix the existing ones to be valid and add a
test to check they really are valid.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.1f7c4ac75c6d.I69d68359e02d99632e95daba3d126115dce167b3@changeid
Move some code that's only done when having received data out
of iwl_mld_rx_fill_status() and remove the two arguments that
are related to that. This simplifies the function for the no-
data case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.77010d6a6694.I2fd06b073460717d324245482110cb0381218526@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use u8_get_bits() instead of open-coding, and adjust the
name as well. Also don't use enum nl80211_band for the
variable holding an entirely different type.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.c41058510800.Ic3f16ce2f0c991fde2cfe7bcd58ee3b875575fce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware statistics were previously reporting bogus/old
channel load values if the device hadn't been active on a
given channel; it'll report an unknown value now for those
statistics affected (channel_load and channel_load_not_by_us.)
Handle that by simply skipping the value, the averaging would
result in the exact same value as before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.db5410318642.I4d2981f68b915ad335bb02c926e9289c2a60ea6c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there are two links on 5 GHz subbands that are separated
enough (using channels 36-64 and 100+) then we can support
EMLSR across those two links. Allow that in the logic.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.d568a26661d5.Ie4277945272c5bbf637957704fda34ea03ef28d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The return type of iwl_mld_emlsr_disallowed_with_link() is a u32
bitmap of exit reasons, but in the data structure confusion case
where the warning triggers, it returns false. Add a new reason
bit for this case so it doesn't return that EMLSR is possible.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.d1f8465e2b5e.I58c463c70801231a79b04c1ff600f41afcbb04f5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In iwl_mld_emlsr_disallowed_with_link() the code uses an
enum for a bitmap of values from it, which doesn't really
make sense.Use u32 for the variable just like the return
value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.ddf54a728ec0.Ie2e8de150f67369c4e034452c5f1a15f85d2931c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* iwlwifi: various regression and iwlmld fixes
* mac80211: fix TX frames in monitor mode
* brcmfmac: error handling for firmware load
-----BEGIN PGP SIGNATURE-----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=c/97
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-04-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some more fixes, notably:
* iwlwifi: various regression and iwlmld fixes
* mac80211: fix TX frames in monitor mode
* brcmfmac: error handling for firmware load
* tag 'wireless-2025-04-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: restore missing initialization of async_handlers_list
wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()
wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release
wifi: iwlwifi: fix the check for the SCRATCH register upon resume
wifi: iwlwifi: don't warn if the NIC is gone in resume
wifi: iwlwifi: mld: fix BAID validity check
wifi: iwlwifi: back off on continuous errors
wifi: iwlwifi: mld: only create debugfs symlink if it does not exist
wifi: iwlwifi: mld: inform trans on init failure
wifi: iwlwifi: mld: properly handle async notification in op mode start
Revert "wifi: iwlwifi: make no_160 more generic"
Revert "wifi: iwlwifi: add support for BE213"
wifi: mac80211: restore monitor for outgoing frames
====================
Link: https://patch.msgid.link/20250424120535.56499-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This has nothing to do with the opmode. Set it in the transport layer
instead.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250423091408.4e288f7897be.I0c8f792ea2ed6967f8c6d8181f9c5f74bbec7d18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If starting the op mode failed, the opmode memory is being freed,
so trans->op_mode needs to be NULLified. Otherwise, trans will access
already freed memory.
Call iwl_trans_op_mode_leave in that case.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.c7e178748ef7.Ifaf15bdd8ef8c59e04effbd2e7aa0034b30eeacb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
From the moment that we have ALIVE, we can receive notification that
are handled asynchronously.
Some notifications (for example iwl_rfi_support_notif) requires an
operational FW. So we need to make sure that they were handled in
iwl_op_mode_mld_start before we stop the FW. Flush the async_handlers_wk
there to achieve that.
Also, if loading the FW in op mode start failed, we need to cancel
these notifications, as they are from a dead FW.
More than that, not doing so can cause us to access freed memory
if async_handlers_wk is executed after ieee80211_free_hw is called.
Fix this by canceling all async notifications if a failure occurred in
init (after ALIVE).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.a8f63d983466.Ifd77d9c1a29fdd278b0a7bfc2709dd5d5e5efdb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To cancel all async notifications, we need to:
- cancel async_handlers_wk
- empty async_handlers_list
Instead of having the callers to do both, do it in
iwl_mld_purge_async_handlers_list and rename it accordingly.
Note that the caller iwl_cleanup_mld didn't cancel the work, but it is
harmless.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.e98aed77e836.Id9f858d9d553d406a24165b09db830df111befce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If iwl_mld_load_fw failed, we call iwl_mld_stop_fw which does, among the
others, iwl_trans_stop_device. But this is already called from
iwl_mld_load_fw's error path.
Since we do need the other stuff of iwl_mld_stop_fw to be done also in
the error path of iwl_mld_load_fw, just call it there.
This also makes the call to iwl_fw_flush_dumps in
iwl_mld_op_mope_start redundant, since it is the same as iwl_fw_dbg_stop_sync.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.f7d86be570d3.Ied68f0c4d126b3b0f1ffd9990bbc43d97f098e24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mld_run_fw_init_sequence used to be the last thing done in
iwl_mld_load_fw, and if it failed, it called iwl_trans_stop_hw.
Now we also have there iwl_mld_init_mcc, and it can fail.
In that case, we need to undo what we did so far, which is basically only
iwl_trans_stop_device. Do that.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.ba06d972a57b.I317fb7b10ed8a688a0d92c5d99de8765d8044b10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
allocating mld->nvm_data used to be the last thing done in
iwl_mld_load_fw, so there was no need to free on any error path of
iwl_mld_load_fw.
But now iwl_mld_load_fw also calls iwl_mld_init_mcc, that can fail,
after allocating nvm->data. In that case, it is not freed.
As allocating the NVM data should only be done at op mode start anyway,
simply move it to there, where it is already freed in the right error
paths.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.d07469f866ac.I84ad2e624ce7cd4a661c73b4942186e50cdf82b2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We never ask the firmware to store the beacon, so it won't ever send the
notification.
Remove the handling of that notification.
Remove that notification from the arrays of the notifications' names and
add the ones that we forgot to add.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.2bb3ea3ff79b.Ie8f1d89f59d45a960a5fe63e7b717527251350ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the FW is tracking the CT window by itself, we don't need
to update the MAC context or even fill in the value. We just had
added that because a firmware bug had broken it for a while.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.ee164b464c21.I29de491b4d74b2b8084e54bfbd28646b15dee196@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The initialization of async_handlers_list
was accidentally removed in a previous change.
This patch restores the missing initialization
to ensure proper handler registration.
Fixes: 6895d74c11 ("wifi: iwlwifi: mld: initialize regulatory early")
Signed-off-by: Itamar Shalev <itamar.shalev@intel.com>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423092503.35206-1-itamar.shalev@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Perhaps IWL_FW_CHECK() is a bit misnamed, but it just returns
the value of the inner condition. Therefore, the current code
skips the actual function when it has the BAID data and makes
it crash later when it doesn't. Fix the logic.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.9c0b84c44c3b.Ied236258854b149960eb357ec61bf3a572503fbc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When mac80211 switches between non-MLO and MLO it will recreate the
debugfs directories. This results in the add_if_debugfs handler being
called multiple times. As the convenience symlink is created in the mld
debugfs directory and not the vif, it will not be removed by mac80211
when this happens and still exists.
Add a check and only create the convenience symlink if we have not yet
done so.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.2490696f032a.I74319c7cf18f7e16a3d331cb96e38504b9fbab66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If starting the op mode failed, the opmode memory is being freed,
so trans->op_mode needs to be NULLified. Otherwise, trans will access
already freed memory.
Call iwl_trans_op_mode_leave in that case.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.3331d1686556.Ifaf15bdd8ef8c59e04effbd2e7aa0034b30eeacb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
From the moment that we have ALIVE, we can receive notification that
are handled asynchronously.
Some notifications (for example iwl_rfi_support_notif) requires an
operational FW. So we need to make sure that they were handled in
iwl_op_mode_mld_start before we stop the FW. Flush the async_handlers_wk
there to achieve that.
Also, if loading the FW in op mode start failed, we need to cancel
these notifications, as they are from a dead FW.
More than that, not doing so can cause us to access freed memory
if async_handlers_wk is executed after ieee80211_free_hw is called.
Fix this by canceling all async notifications if a failure occurred in
init (after ALIVE).
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.1a8579662437.Ifd77d9c1a29fdd278b0a7bfc2709dd5d5e5efdb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The C sequence points are complicated things, and gcc-15 has apparently
added a warning for the case where an object is both used and modified
multiple times within the same sequence point.
That's a great warning.
Or rather, it would be a great warning, except gcc-15 seems to not
really be very exact about it, and doesn't notice that the modification
are to two entirely different members of the same object: the array
counter and the array entries.
So that seems kind of silly.
That said, the code that gcc complains about is unnecessarily
complicated, so moving the array counter update into a separate
statement seems like the most straightforward fix for these warnings:
drivers/net/wireless/intel/iwlwifi/mld/d3.c: In function ‘iwl_mld_set_netdetect_info’:
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1102:66: error: operation on ‘netdetect_info->n_matches’ may be undefined [-Werror=sequence-point]
1102 | netdetect_info->matches[netdetect_info->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1120:58: error: operation on ‘match->n_channels’ may be undefined [-Werror=sequence-point]
1120 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
side note: the code at that second warning is actively buggy, and only
works on little-endian machines that don't do strict alignment checks.
The code casts an array of integers into an array of unsigned long in
order to use our bitmap iterators. That happens to work fine on any
sane architecture, but it's still wrong.
This does *not* fix that more serious problem. This only splits the two
assignments into two statements and fixes the compiler warning. I need
to get rid of the new warnings in order to be able to actually do any
build testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The newly added driver causes multiple build problems when CONFIG_PM_SLEEP is
disabled:
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:1982:12: error: 'iwl_mld_resume' defined but not used [-Werror=unused-function]
1982 | static int iwl_mld_resume(struct ieee80211_hw *hw)
| ^~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:1960:1: error: 'iwl_mld_suspend' defined but not used [-Werror=unused-function]
1960 | iwl_mld_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
| ^~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:1946:13: error: 'iwl_mld_set_wakeup' defined but not used [-Werror=unused-function]
1946 | static void iwl_mld_set_wakeup(struct ieee80211_hw *hw, bool enabled)
| ^~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c: In function 'iwl_mld_mac80211_start':
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:504:20: error: 'ret' is used uninitialized [-Werror=uninitialized]
504 | if (!in_d3 || ret) {
| ^~
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c:478:13: note: 'ret' was declared here
478 | int ret;
| ^~~
Hide the unused functions and make sure the 'ret' variable is not used
before the initialization.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250325084340.378724-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Config symbols are not defined if turned off, so need to
use #ifdef, not #if.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Yedidya Ben Shimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250401064530.612020bcdaad.I4e885e6646576e29fb236250a1b5038d3f14b08e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After resuming from D3, keeping the connection or disconnecting
isn't relevant for the case of netdetect.
Reduce the scope of the keep_connection indicator to wowlan only.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250401064530.769f76a9ad6e.I69e8f194997eb3a20e40d27fdc31002d5753d905@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mld_remove_link removes the link from both the FW and from the
driver.
If removing it from the FW failed, we assume that the FW is
dead anyway and remove it from the driver as well.
On the other hand, we still return an error value, indicating the caller
(i.e. mac80211) that the link couldn't be removed - while it was
actually removed.
Later, mac80211 might tell the driver again to remove that link,
and then the driver will warn that it doesn't exist.
Fix this by making iwl_mld_remove_link a void function.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.16fe6ebae412.If5371ff7e096b7078ff9e98ff0e72010cd1f076d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently iwlmld_kunit_add_chanctx receives a band, picks a predefined
static chandef, and creates the chanctx from it.
Change it to receive a bandwidth as well. Otherwise, the bandwidth in
the chanctx/phy will be different than what test specified in the
iwl_mld_kunit_link.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.85a1285d34cd.Ia71cdcd4241fe73501bc93e3cb2c6bb3f631b9ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To allow setting up association/EMLSR states with more flexibility,
change the relevant functions to receive a new struct, iwl_mld_kunit_link,
which will contain all the link parameters (for now just link id, band
and bandwidth).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.f336491ccc4e.I6b727765eb394a3dbb78cea71e356be1bdc4a17c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow EMLSR if the bandwidths of the links are unequal if one of the
following conditions is true:
1. in low latency mode
2. bandwidth of the secondary link is greater than the bandwidth of the
primary
3. the primary link is active and is loaded enough to justify EMLSR
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.150c330711c4.Ifd72d2e076783991852a7f1756948b4f0efb9fea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We exit EMLSR mode if the FW requested to do so.
To prevent repeated toggling of the EMLSR mode (frequent entry and
exit), add this exit reason to the EMLSR prevention mechanism.
This mechanism avoids re-entering EMLSR for a certain period of time
after multiple exits caused by the same reason.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.f0e74a7f99af.I447c8788afba85a2a5040ae2c1213b6e05ec14f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The channel load logic moves from the FW to the driver.
- Implement the logic: allow EMLSR only if the candidate primary link is
active and if its average channel load exceeds the threshold.
- Remove IWL_MLD_EMLSR_BLOCKED_FW. Instead, treat ESR_RECOMMEND_LEAVE in
the EMLSR_RECOMMENDATION notif as an EXIT reason.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.6729a8d67815.Iab39bf0982d8cdbb0db701d31854101c2fcf3b64@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add debugfs file in mld to retrieve TAS status per radio, TAS block list,
current mcc, OEM name and OEM allowed list. This will add ability to get
TAS status to user application via debugfs and required for debugging.
Add the required API definitions and some debug host command utils.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.66524c6ea198.I1625135284fc075148a55dd9ac629e94ca881fe4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The WIPHY_DEBUGFS_READ_WRITE_FILE_OPS_MLD macro is intended to call
read/write handlers with the wiphy lock held. However, the current
implementation uses the MLD_DEBUGFS_READ_WRAPPER macro, which does
not hold the wiphy lock during read operations. This fix updates
the WIPHY_DEBUGFS_READ_WRITE_FILE_OPS_MLD macro to use the
WIPHY_DEBUGFS_READ_WRAPPER_MLD macro instead, ensuring that the
wiphy lock is held during both read and write operations.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.2001d2335e9d.I607a8bd12efc6d1190cef1fca44279dbdd2756ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduced the WIPHY_DEBUGFS_READ_FILE_OPS_MLD macro to enable reading
data from the driver while holding the wiphy lock.
This will enable read operations with wiphy locked.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.b0ddb6b0a144.I1fab63f2c6f52fea61cc5d7b27775aed58adfd8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Renamed the macro WIPHY_DEBUGFS_HANDLER_WRAPPER to
WIPHY_DEBUGFS_WRITE_HANDLER_WRAPPER to better reflect its purpose as a
write handler.
Additionally, updated the corresponding macro
WIPHY_DEBUGFS_HANDLER_WRAPPER_MLD to
WIPHY_DEBUGFS_WRITE_HANDLER_WRAPPER_MLD for consistency.
This change does not alter the functionality but enhances the
maintainability of the code.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.bb8a1d7907c8.I53325f2f37ccaad2b212d35d10616e06c1555e48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pointers declared with the __free(kfree) attribute need to be initialized
because they will be passed to kfree() on every return path. There are
two return statement before the "cmd" pointer is initialized so this
leads to an uninitialized variable bug.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/f7c17a7f-f173-43bf-bc39-316b8adde349@stanley.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we don't select a link that wasn't heared in the last 5
seconds.
But if the link started to suffer from missed beacons more recent than
that, we might select this link even we really shouldn't,
leading to a disconnection instead of a link switch.
Fix this by checking if a link was heared in the last MLO scan,
if not - don't include it in the link selection.
Since we do an MLO scan on missed beacons, we will not hear that link in
that scan, and won't select it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.8f950497219e.I51306021fe9231a8184e89c23707be47d3c05241@changeid
[replace cast with ULL constant]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the RSSI is dropping to below the threshold, we need to do a MLO
scan to try select a better link.
This is true also if the connection doesn't have EMLSR capability,
and also if we are in EMLSR.
Fix the logic to always check the RSSI (and do a MLO scan if needed).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.a31b95888244.If6dca30d657658fa902b19e07b6fbc86c48d69cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to the requirements, if the last scan isn't older than 20
seconds, we can use its results and do the link selection without
scanning before.
But this applies only when trying to get back to EMLSR, not if the link
has bad RSSI/missed beacons.
Since an MLO scan is cheap anyway, and results from 20 seconds before
are really old, always scan before links switching.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.a4c96e5c49d4.Ie55697af49435c2c45dccf7c607de5857b370f7a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the setting of the A-MSDU maximal lengths as follows:
- Move the setting of the maximal A-MSDU length in case of HT from TLC
logic to the station logic as it is not related to TLC.
- As long as the station is not associated, set RC A-MSDU maximal
lengths to 1, to prevent iwlmld and mac80211 from building A-MSDUs.
- Update the RC and the TID specific A-MSDU maximal lengths based on
the FW TLC notifications.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.afc842633002.I68153b6b0c5d976f2c7525009631f8fa28e9987c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On station interfaces we don't only have the AP STA, but also
TDLS stations. Don't try to remove AP keys for them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.f06a4d6eed2b.Icd20af668a22bfae5328eb0ea00ce10a72ce3539@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to the iwl_mld_get_chandef_from_chanctx() logic, even after
the OMI handshake to reduce bandwidth the driver wouldn't apply
that to the PHY context, since it always uses the normal, not
the reduced, configuration on 6 GHz (not strictly always, but
OMI will only apply if the original bandwidth is > 80 MHz.) Fix
this by making that selection contingent on AP mode. Refactor
the code a bit to also make it clearer why the min_def isn't
used in that case (for FILS.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.2706cbd0b100.Ic34636b1aee81a140eb690fca8139909a58f8e8b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We used ieee80211_iterate_active_interfaces instead of
ieee80211_iterate_active_interfaces_mtx, which is the one to use when
the wiphy lock is held.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250309073442.925cdca61ed0.I34f5c52d27414cb4c301bbd24df7c3530a43fa1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since iwlmld claims wiphys to be self-managed, it needs to
have a regdomain registered before the wiphy is registered
to avoid issues when trying to get the regdomain, e.g. via
"iw phy phy0 reg get".
Move the initialization early, on every FW start not just
when starting to really operate it. This also requires the
self-managed flag to be set early.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.10ab8fed94e9.I7c8dee3d14c7427a56882739f82546c6492f3b10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code was calling ieee80211_iterate_interfaces, however that
takes a lock of iflist_mtx, which must not be taken recursively. Fix
this by using the appropriate _mtx version that asserts that the wiphy
mutex is already held.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.6ce298d6a44f.Ibc862dfdd6cb2da63781c791b9dc601bd5ce4bdc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Change reasons enum to a bitmask and rename it
- Don't use 'else if' so all reasons will be set in the reasons bitmask
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.0a3b2f88fbbf.I0152bc39e828488451e85135feb044ce1f7a85d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For each channel context, track the avarage channel load by others in the
driver specific phy data, to be used by EMLSR.
Due to FW limitations, this value is incorrect in EMLSR, so it is
shouldn't be used in EMLSR.
On EMLSR exit, clear it so the wrong value won't be used.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.dd443fc5b178.I68b2fed197aae14888159b7a73bf40c2f346f41f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the user disables power save of a vif that didn't have it enabled
(for example before association), mac80211 will not notify the driver
with BSS_CHANGED_PS. This will cause the driver to not update the
device-level power save to disabled.
Fix this by checking the vif's power save status upon authorization, and
stop considering the vif's power save status on disassociation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.1cdeb78b19ba.I58fe02c062524029071b04b093a1b09c5e46f4ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwlwifi is the driver of all Intel wifi devices since 2008.
Since then, the hardware has changed a lot, but the firmware
API has changed even more. The need to keep one driver that
supports all those different APIs led us to introduce a new
architecture circa 2012 which allowed us to keep the same
interface to the hardware (DMAs, Tx queues, etc...) with a
new layer to implement the mid-layer between mac80211 and
the firmware. The first component is called the 'transport'
and the latter is called 'operation_mode' a.k.a op_mode.
In 2013 we took advantage of the new architecture to
introduce iwlmvm which allowed us to implement the, then,
new firmware API. This op_mode supports 7260 and up, those
devices supports support at least VHT.
Since then, wifi evolved and so did the firmware. It became
much bigger and took a lot of functionality from the driver.
It became increasingly hard to keep the same op_mode for the
newest devices and we experienced frequent regressions on
older devices. In order to avoid those regressions and keep
the code maintainable, we decided it was about time to start
a new op_mode.
iwlmld is a new op_mode that supports BE200 or newer if the
firmware being used is 97.ucode or newer. If the user has
an older devices or BE200 with .96.ucode, iwlmvm will be
loaded. Of course, this op_mode selection is seamless.
All the features supported in iwlmvm are supported in
iwlmld besides a few seldom used use cases: injection and
Hotspot 2.0. Those are under work.
A few points about the implementation:
* iwlmld doesn't have any mutexes, it relies on the
wiphy_lock
* iwlmld is more "resource oriented": stations, links and
interfaces are allocated and freed only after all the
relevant flows are completed.
* Firmware notifications' sizes are validated in a more
structured way.
We would love to see this new op_mode merged in 6.15. The
firmware for this new driver (.97.ucode) is not yet publicly
available but it'll be sent very soon.
People eager to get an early version of this firmware can
contact Emmanuel at:
emmanuel.grumbach@intel.com
I've listed the people who directly contributed
code, but many others from various teams have
contributed in other ways.
Co-developed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Co-developed-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Co-developed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/
[fix Kconfig, fix api/phy.h includes, SPDX tag and coding
style issues, duplicated includes per 0-day robot]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
