We needed it for setting up trans parameters that could change later in
the probe flow.
This is no longer true, now we know all the parameters before we allocate the
trans, so we can just send the right parameters to iwl_trans_alloc and have all
initializations done there.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
.../net/wireless/intel/iwlwifi/iwl-trans.c | 25 ++--------
.../net/wireless/intel/iwlwifi/iwl-trans.h | 8 +--
.../intel/iwlwifi/pcie/gen1_2/trans.c | 50 ++++++++++++-------
3 files changed, 41 insertions(+), 42 deletions(-)
Link: https://patch.msgid.link/20250709081300.9602fde079de.Iaede14c91095560852f9b441f1e16546b0a06bdd@changeid
Context info was introduced in 22000, and was significantly changed in
ax210. The new version of context info was called 'gen3',
probably because in 22000, the gen2 transport was added.
But this name is just wrong:
- if 'gen' enumerates transports, there was not a gen3 transport, just a
few modifications to gen1/2 transports needed for ax210.
- if 'gen' enumerates devices, then we can just use the device names.
Also, context info will soon become a lib, agnostic of the transport
generations.
Simply replace 'gen3' with 'v2'.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.a580bd8d4f74.Ie413a02233f1a5ad538e13071c09760b9d97be3b@changeid
We have iwl_tx_cmd for devices older than 22000, iwl_tx_cmd_gen2 for
22000 devices, and iwl_tx_cmd_gen3 ax210 and up.
But the convention for all other APIs is to have the latest version
without any prefix and the older ones - with a _vX prefix,
where X is the highest version that this struct support.
The term 'gen' was introduced as the name of the (back then) new
transport, and should not be used as a device name (for that we have the
actual names: 22000, ax210, etc.)
Now as a new transport, called 'gen3', is going to be written and it can
be confused with this API.
Move iwl_tx_cmd to use the regular versioning convention.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.806e40c8f767.Ibc0e95e43a6fa6d47f72823bf804314d5db84618@changeid
Since 9000 series devices, the devices are split into MAC and
CRF parts. Currently, "struct iwl_cfg" reflects some MAC and
some RF parameters, but we want to clean this up and move the
MAC data to what's now "struct iwl_cfg_trans_params". As the
first step, to reflect the intent, rename this structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Instead of having a trans_configure method that copies all
the data, just have the users set up the configuration in
the transport directly. This simplifies the code on both
sides. While doing so also move some value from the trans
struct into the conf struct because they are configuration.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250504132447.e2a2535ecfd0.I21653103ff02afc5a4d97a41b68021f053985e37@changeid
Add a new device information 'info' substruct to the transport
that's const and can only be set by a special helper, and move
some information there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250503224232.cd80cb55403c.Ic18524b66d655fad734bf97192a54d9cfa9fdf1f@changeid
We pass this parameter around a lot of places just to
validate what the firmware told us against the hardware
with a warning, which seems to never trigger. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250503224232.5405014d7f88.I3b74a1fd51a39c6df5674f2994189092d1635e7f@changeid
The code currently passes only the specific image that should
be loaded, but then has to pass the IML (image loader) out of
band, which is confusing. Pass the full FW data together with
desired image type, and use the IML from that.
This also cleans up the code in the various sub-drivers a bit
as they no longer have to look up and check for the image.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250503224231.eac4006e81c5.Iebadc56bb2762e5f4d71f66bb2609d74b33daf11@changeid
Simplify the logic here by tracking only suspended as a
status bit, and remove CMD_SEND_IN_D3 completely. There
is no value, since the op-mode sets the state and also
sends the commands.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250503224231.cc3360761f1e.I72261afc42cee8983198b4660b7d38b7df7963da@changeid
Implement TOP reset (new in the SC family), which resets much
of the (shared) hardware without resetting the bus interfaces.
Use it to recover from TOP fatal error, or if manually used;
we'll need to add using it for FSEQ updates later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430155443.12f38024a3b4.I9c22f6c4f6de64f3b34ccd898370ec1859ab7dbf@changeid
For the upcoming SC hardware, a new reset mode "(silent) TOP
reset" will be available. When BT initiates that reset, it'll
negotiate with the WiFi firmware which makes it appear to the
driver as the reset interrupt. To distinguish it from all the
other reasons for the reset interrupt, there's (now) a status
field in CSR 0x110.
Implement the part of TOP reset where we react to BT doing it.
This requires disambiguating the interrupt, depending on the
state of the device, since we can even get TOP reset from BT
while waiting for the reset handshake.
If TOP reset is done by BT while we're not trying to do reset
anyway, then simply reprobe, since we cannot keep the state
of the device as it's being reset, after waiting the needed
180ms to let the device reset/settle.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.fb86bfbdca40.Ibe40bf54003e3f8929b671324a395e76eb64a4d8@changeid
When a restart is in progress, it can be async due to the next
worker being scheduled in mac80211 (restart work) or the driver
itself (reprobe). Avoid scheduling another restart during this
period.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.db428503ec3c.I3f2be3d72a9d40cfb4e697cdab1cd2866a9262bc@changeid
Some BIOSes decide to power gate the WLAN device during S3. Since
iwlwifi doesn't expect this, it gets very noisy reporting that the
device is no longer available. Wifi is still available because iwlwifi
recovers, but it spews scary prints in the log.
Fix that by failing gracefully.
Fixes: e8bb19c1d5 ("wifi: iwlwifi: support fast resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.d8d58146c829.I569ca15eaaa774d633038a749cc6ec7448419714@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When errors occur repeatedly, the driver shouldn't go into a
tight loop trying to reset the device. Implement the backoff
I had already defined IWL_TRANS_RESET_DELAY for, but clearly
forgotten the implementation of.
Fixes: 9a2f13c40c ("wifi: iwlwifi: implement reset escalation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.8816e299efa2.I82cde34e2345a2b33b1f03dbb040f5ad3439a5aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a few conflicts between the work that went
into wireless and that's here now, resolve them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
iwl_trans_reclaim is warning if it is called when the FW is not alive.
But if it is called when there is a pending restart, i.e. after a FW
error, there is no need to warn, instead - return silently.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.ba3d90b22c25.I9332506af1997faefcf0bdb51d98d5e874051722@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the restart work happens to run after the opmode left
(i.e. called iwl_trans_op_mode_leave), then the opmode memory (including
its mutex) is likely to be freed already, and trans->opmode is NULL.
Although the hw is stopped in that stage, which means that this restart
got aborted (i.e. STATUS_RESET_PENDING will be cleared),
it still can access trans->opmode (NULL pointer dereference)
or the opmodes memory (which is freed).
Fix this by canceling the restart wk in iwl_trans_op_mode_leave.
Also make sure that the restart wk is really aborted.
Fixes: 7391b2a4f7 ("wifi: iwlwifi: rework firmware error handling")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306122425.801301ba1b8b.I6f6143f550b6335b699920c5d4b2b78449607a96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Re-probing if we had 2 firmware crash within 3 minutes is really too
aggressive. Drastically reduce the threshold to 7 seconds.
After 7 seconds, a new firmware crash will be considered "new" and not
cause a PCI re-probe.
This allows to pass tests that cause a firmware crash every 10 seconds
and expect to see no impact on the traffic.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.38f912b047f4.I03f0c10ae9e7ecea639431f3e089b757cc8a4347@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During reprobe, the sw state is being destroyd, and so is the
connection. When the peer STA is being removed, the opmode sends a
command to flush the TXQs of the STA and uses iwl_trans_wait_txq_empty.
This one warns if the FW is not alive, but it really shouldn't if
there is a FW error - and return silently instead, just like we do when
sending a hcmd.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250205145347.76425b10e5a0.I3bf0de2eb090a8b94c4e36d93dd91df61fadb808@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the normal reset methods don't work well, attempt to
escalate to ever increasing methods. TOP reset will only
be available for SC (and presumably higher) devices, and
still needs to be filled in.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241231135726.804e005403d8.I9558f09cd68eec16b02373b1e47adafd28fdffa3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to later add the ability to do deeper resets of the
device when it crashes, first restructure the firmware error
handling. Instead of having just a single nic_error() method
that handles all, split it:
- nic_error() just handles and prints the error itself,
- dump_error() synchronously creates an error dump, and
- sw_reset() will be called to request doing a SW reset.
This changes the architecture so that the transport is now
responsible for deciding how to do the reset, and therefore
the handling of reprobe if error occurs during reconfig
moves there, which necessitates adding a method there that
notifies the transport that the recovery was completed.
Actually introducing the model under which deeper resets can
be done will be in future patches.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.6d4f741ae907.I96a9243e7877808ed6d1bff6967c15d6c24882f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Kalle reported that this triggers very occasionally, but
we don't even know which place, except that it wasn't one
with a warning. Make all of them warnings since this is
really not meant to happen and indicates driver bugs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240625194805.be7a3a95afae.Ie8606d36783818c043c971bf0bc6f4df6a6e8f5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_trans_pcie_gen2_fw_alive doesn't use the scd_addr parameter,
it was there only because we needed the functio to have a prototype same
as iwl_trans_ops::fw_alive callback.
But now the ops is removed so no reason to keep the parameter.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240618194245.1aa8bf13aea9.I9662c10c1db545dd8849af4bb4ab47708d4548d8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was needed when we had multiple types of transports. Now we only
have pcie, so there is no need for this ops.
Cleanup the code such as the different trans APIs will call the pcie
function directly, instead of calling the callback,
and remove struct iwl_trans_ops.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The TX queue code was mostly moved out to support an internal
transport that we were never going to publish, but we're no
longer using that. Since we're also going to be dissolving
the virtual transport layer entirely, integrate the TX queue
code into the PCIe layer.
This also has a small kernel of already removing the virtual
transport function layer, since iwl_trans_send_cmd() calls
iwl_trans_pcie_send_hcmd() directly now, even if that still
calls the transport send_cmd method for now, we'll clean it
up later.
Also, not everything is renamed yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.936b13f45071.Ib219ce01a1e67bcad79d5131626db950252aaa46@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's only one user of this code, which is STA unblock
during sleep for uAPSD on really old devices. Instead of
having this all through the API with calls up and down,
just implemented a special-case CMD_BLOCK_TXQS flag for
this, it's only needed in the old gen1 transport.
While at it, fix a complain that lockdep would have, as
we lock the cmd queue and then the TXQs in the reclaim
by using spin_lock_nested(). We no longer need to disable
BHs in iwl_trans_pcie_block_txq_ptrs() since it's called
with them disabled already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.2bd95e0570fc.I16486dbc82570d2f73a585872f5394698627310d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.
There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622
Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/
Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/
Fixes: 19898ce9cf ("wifi: iwlwifi: split 22000.c into multiple files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of this change is a continuation of commit 403ea939ea
("iwlwifi: dbg: Mark ucode tlv data as const") propagating the
(const) type qualifier for ucode based tlv data to avoid having
the impression that it is writeable.
The other part of the change preserves the (const) type qualifier
over casts and function calls where it was previously lost.
Both changes are needed to avoid compile time errors on system with
more strict error settings, in this case found with clang on FreeBSD.
Sponsored by: The FreeBSD Foundation
Signed-off-by: Bjoern A. Zeeb <bz@FreeBSD.ORG>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[fix double word in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.3230c41312fc.I0032c597984834258d5a79b97052ed83dbe53b80@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In a few PCIe devices we may have to swap out the configuration
after we allocate/initialise some parts of the device because
we only know the correct one after reading some registers. This
causes some things such as the byte-count table allocations to
be incorrect, since the configuration is swapped for one with a
bigger queue size.
Fix this by initialising most of the transport much later, only
after the configuration has finally been determined.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.8f5db97db1e4.Ic622da559b586a04ca536a0ec49ed5ecf03a9354@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Once sending the REPLY_ERROR group ID is not set and this lead to
get it set to wrong value LONG_GROUP later in default handling
Fix this by checking the REPLY_ERROR and avoid changing the Group ID
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.82578caaea84.I0ca9cfdd4e656d2e88ee7696dd6baf4267e7cb52@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Handling host commands in a sync way is not directly related to PCIe
transport, and can serve as common logic for any transport, so move
it to trans layer.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210117164916.fde99af4e0f7.I4cab95919eb35cc5bfb26d32dcf5e15419d0e0ef@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
D3_CONFIG_CMD and D0I3_END_CMD should be the last\first
command upon suspend\resume correspondingly, otherwise,
FW will raise an assert (0x342).
There are firmware notifications that cause the driver to
send a command back to the firmware. If such a notification
is sent to the driver while the the driver prepares the
firmware for D3, operation, what is likely to happen is that
the handling of the notification will try to get the mutex
and will wait unil the driver finished configuring the
firmware for D3. Then the handling notification will get
the mutex and handle the notification which will lead to
the aforementioned ASSERT 342.
To avoid this, we need to prevent any command to be sent to
the firmware between the D3_CONFIG_CMD and the D0I3_END_CMD.
Check this in the utility layer that sends the host commands
and in the transport layer as well.
Flag the D3_CONFIG_CMD and the D0I3_END_CMD commands as
commands that must be sent even if the firmware has already
been configured for D3 operation.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210117164916.1935a993b471.I3192c93c030576ca16773c01b009c4d93610d6ea@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
