The TOP is a shared (between BT and WiFi) hardware component,
and if it has an error we need to reset the whole device, i.e.
both BT and WiFi. This is achieved by calling a specific ACPI
DSM (device-specific method) with the right arguments before
doing a reset via the object referenced by _PRR.
Since this is needed here, but a function reset will always do
better than just re-enumerating the bus in case of errors, we
can always try to at least do a function reset and do the full
product reset only when needed for TOP errors.
Also, for some Bz and Sc devices where BT is PCIe/IOSF as well,
find the BT device and unbind that device as well so the BT
driver can recover from the reset that's going to happen,
rather than having to somehow detect that the device was reset.
Also add - currently unused - the function reset mode, this is
going to get used in the upcoming escalation model.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241231135726.5b0f846d3e13.Ia14ccac38ac3d48adf5f341b17c7e34ccc41c065@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The API isn't really MVM specific, it's just the firmware
API. Remove the "MVM_" from the name here as well, as we've
already done in many other places.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241229164246.66e17791c392.I6998e263973c26c1e22b4f470b974a519011b29a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
By convention the newest version of a command/notification structure is
named with out the _ver_# suffix. Apply to stored_beacon_notif.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241228223206.e2140aa3c65b.Ie851bdda6df02dcc352bf765a3ec6bdac45c65a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A caller of iwl_acpi_get_dsm_object must free the returned object.
iwl_acpi_get_dsm_integer returns immediately without freeing
it if the expected size is more than 8 bytes. Fix that.
Note that with the current code this will never happen, since the caller
of iwl_acpi_get_dsm_integer already checks that the expected size if
either 1 or 4 bytes, so it can't exceed 8 bytes.
While at it, print the DSM value instead of the return value, as this
was the intention in the first place.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241228223206.bf61eaab99f8.Ibdc5df02f885208c222456d42c889c43b7e3b2f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Usually each struct that represent an API needs to have a comment
specifying all the versions of the API that this struct corresponds to.
iwl_tx_cmd_gen3 was long supporting also version 10. Say that.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241228223206.83d681dc9cf7.I355270fb20b23978d9402cb70caf52a0108b8cd4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since iwl_fw_error_collect() is now always called with the sync
argument set to true, to collect data synchronously, remove the
argument from it entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.08f515513e88.I780a557743ca7f029f46a1cc75d0799542e39d83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For certain platforms, it may necessary to use the STEP in URM
(ultra reliable mode.) Read the necessary flags from the BIOS
(ACPI or UEFI) and indicate the chosen mode to the firmware in
the context info. Whether or not URM really was configured is
already read back later, to adjust capabilities accordingly.
Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.b30024905de3.If3c578af2c15f8005bbe71499bc4091348ed7bb0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This variable exists for the "common" (WiFi/BT) GUID, not the
WiFi-only GUID. Fix that by passing the GUID to the function.
A short-cut for the wifi-only version remains so not all code
must be updated.
However, rename the GUID defines to be clearer.
Fixes: 09b4c35d73 ("wifi: iwlwifi: mvm: Support STEP equalizer settings from BIOS.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.89a5ad921b6d.Idae95a70ff69d2ba1b610e8eced826961ce7de98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is becoming the link_id. Since this makes no difference on non-MLD
devices, just rename to link_id for all the APIs that use the common
structure.
Starting from command 9, feed the link_id to the firmware instead of the
mac id.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.f1155e713201.I753900d10e82f339cf9679ed403027d38dc1fd58@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
extend TAS table support to revision 2 for getting UHB canada
enablement from BIOS and send to firmware via TAS_CONFIG cmd
based on firmware capability. While on it fixed kernel-doc for
struct iwl_tas_config_cmd_v4.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.0b1d92ad59b8.Ib80f8514a64fc2800a2a20131e730c2bd9c4c4af@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 6b3e87cc0c ("iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD
cmd v9")
added a few bits to iwl_lari_config_change_cmd::oem_unii4_allow_bitmap
if the FW has LARI version >= 9.
But we also need to send those bits for version 8 if the FW is capable
of this feature (indicated with capability bits)
Add the FW capability bit, and set the additional bits in the cmd when
the version is 8 and the FW capability bit is set.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241226174257.dc5836f84514.I1e38f94465a36731034c94b9811de10cb6ee5921@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit ef7ddf4e2f ("iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD v12")
added a few bits to iwl_lari_config_change_cmd::chan_state_active_bitmap
if the FW has LARI version >= 12.
But we also need to send those bits for version 8-11 if the FW is capable
of this feature (indicated with capability bits)
Add the FW capability bit, and set the additional bits in the cmd when
the version is 8 and the FW capability bit is set.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241226174257.672651ad849c.I67a00d9544c48ad964f8e998ebe8c168071c3d01@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmc04UYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuckgf/RV0zy8gMuzJ/cSk1GDKoOYmEwAZ4JvtW
teAKghsODDW/bng2iKnXphJyx3spZRCNuvOmfPcHsWoResX+vqrKJOaER/3159OF
68xAPZNXPRF4M693IpIUB/P3uTw/jieXPI7ftSPuUOhStca/ALwQd5Lp3kNKkVtq
HipXJwCenVS7Hd8DdHbpvYFUckRWr3tHPFlOgG3qOQOVvfRen2z9rhM14oK9rn+h
f309ATHKTbpTKNagOPYAYcyHs3zE59hlVRgRqHL7Ew0a0HI8uPJ4KK2n5W6tZJFN
swhoQolc1uXrRYlZ3Bdr7mKSIqt557kRz7NJ9ITe7KKCU0CxM/7nhQ==
=v8bS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Those macros are currently in fw/api/binding.h, which should really not
be included in newer code, where this API is not used.
Just move it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241028135215.48443f1c1819.I1cfe8c6c58153031d44f81edc0f8731077666355@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the NIC is dead upon resume, try to catch the error earlier and exit
earlier. We'll print less error messages and get to the same recovery
path as before: reload the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.3a18682261e5.I18f336a4537378a4c1a8537d7246cee1fc82b42c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for range_request_cmd version 15. This version adds a
testing option flag to use bad secure LTF Tx key. The command struct
itself is not changed.
Add support for responder config command version 11. This version only
adds a flag which is part of the MVM_FTM_RESP_FLAGS and does not
require any special handling.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.264826832f16.Iad4fdcd177a9c4bcb0839d3f87c793b4f83eb2c7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support version 7 of wowlan_config_cmd and version 5 of
iwl_wowlan_info_notif
This version is mainly a cleanup of the previous version.
Two fields were removed as the device already handled this data.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.d2afdf720073.I9901c8c4ad4508135d019efa213b1430acc70746@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When starting the suspend flow, HOST_D3_START triggers an _async_
firmware dump collection for debugging purposes. The async worker
may race with suspend flow and fail to get NIC access, resulting in
the following warning:
"Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)"
Fix this by switching to the sync version to ensure the dump
completes before proceeding with the suspend flow, avoiding
potential race issues.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.9aae318cd593.I4b322009f39489c0b1d8893495c887870f73ed9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We require a message, but the macros shouldn't require a
formatted message, a constant one can be fine. Change the
macros to support that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.96e8554cb7a2.I0e06d8fd49f86bd4e9e216fc2265c43d7e78a095@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a function for getting the error status and error
code for given error table.
Remove a static function of same purpose from mvm/d3.c
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.610a38614ce6.Iab5f795bc30ce5d08550cff1772fe051527bcb95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The flags_mask field is becoming reserved, and a new bandwidth
request is being added for RX OMI purposes. Support the new API
version as preparation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.437c6573df3c.I03612cb6cf47b12038c1db11b95a554cdea714e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex has recently started to see active development which is good
news. rtw89 is also under active development and got several new
features. Otherwise not really anything out of ordinary.
We have one conflict in ath12k but that's easy to fix:
https://lore.kernel.org/all/20240808104348.6846e064@canb.auug.org.au/
Major changes:
mwifiex
* support for up to ten Authentication and Key Management (AKM) suites
* host MAC Sublayer Management Entity (MLME) client and AP mode support
* WPA-PSK-SHA256 AKM suite support
rtw88
* improve USB performance by aggregation
rtw89
* Wi-Fi 6 chip RTL8852BE-VT support
* WoWLAN net-detect support
* hardware encryption in unicast management frames support
* hardware rfkill support
ath12k
* DebugFS support for transmit DE stats
* Make ASPM support hardware-dependent
iwlwifi
* channel puncturing for US/CAN from UEFI
* bump FW API to 93 for BZ/SC devices
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbYfCARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt+Qwf/X9oQ4sf8jV6eOV7EhoWhIHnQadvo5YBZ
ulBm8In0QGjEOVWkI7kXGabKP5jhne2lVIyP1eFfP2/td/A2yDWIuEeBfDQD6f4K
aiUGAa1gs4ZtGKJBniw/ukflSqJlR99N2qBO5T/smDm3Nw/aC522SO7BoLTpoJDQ
SuW4atFHMShXYf/vIrAA2yB9ok2yw/QM+27M9qjj6D7zzqsQxDl9wKGW+2v8KiSa
rXXbfnwfaQP21CYv5xYbEPACSRSV5Dr0TNopivWYxmm9svjLzwFN2JM2fHPxBEDh
wP6Ojp+Z32c1VbQtclLrwIQdlZ5yhU5MEDlVg5VLym9F83hv+oXTbA==
=lgVx
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d1 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b4 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we de-activate a link because it started a CSA with mode=1, we want
to tell the firmware it can no longer transmit any frame for that link.
The firmware will do that on its own if the CSA indication (beacon /
action frame) was received on that same link, but with MLO, things got
more complex and the firmware can't track cross link CSA.
Tell the firmware if we de-activate a link because of CSA with mode=1 to
prevent it from transmitting, even if it is only an NDP PM=1 frame that
is part of the de-activation flow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.4bef89d438d4.If7147a7a84054e67c05414c753d73f4e2e0e6e37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The channel number is at the same position across all versions
of the channel description struct, so move it out of the union
that versions it. Also add __packed annotations to all of the
sub-structs and the union so it's packed correctly, and fully
document the structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.e31623ae4201.I1ea69a8ec3d39492f39d84e31fb105b159359c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Note that the new API does not have the same notification ID as the
previous notification: the new notification belongs to the group 0x3.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.4ea52360b32e.Ibc25dcabd8aeadda906549482a6c77bc42fb55bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A new version is coming up. Rename the current struct to include the
current version.
s/iwl_missed_beacons_notif/iwl_missed_beacons_notif_v4
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.b5c3a83a05ef.I698611582b5ca8395f42a535c51f7230307e2c6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have a new notification the BT profile. It contains almost nothing,
only the wifi loss information. Copy this into mvm. We still need to
iterate over the vifs / links to use this data.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.637499f3a85a.I8bf654cf5d8aa038100273876c936845ecc338f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_bt_coex_profile_notif is now being obsoleted. It'll be replaced
by a new notification coming with a non-legacy group. Rename it to avoid
confusion.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.dc29fd0d7817.I5881fce86ec8b76ae98d2948265434b8e7d860c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the upper layer requests to cancel an ongoing scan, a race
is possible in which by the time the driver starts to handle the
upper layers scan cancel flow, the FW already completed handling
the scan request and the driver received the scan complete
notification but still did not handle the notification. In such a
case the FW will simply ignore the scan abort request coming from
the driver, no notification would arrive from the FW and the entire
abort flow would be considered a failure.
To better handle this, check the status code returned by the FW for
the scan abort command. In case the status indicates that
no scan was aborted, complete the scan abort flow with success, i.e.,
the scan was aborted, as the flow is expected to consume the scan
complete notification.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware needs to know what we had in the HE CAP, propagate that
setting to the firmware through the LINK command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.fef270d2995b.I328237837df30e1cb98764987eaaf8e8993e058c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Rename iwl_dev_tx_power_cmd to iwl_dev_tx_power_cmd_v3_v8
* struct iwl_dev_tx_power_common needs to be packed. It was always the
case, but now that its size is not a multiple of 4, it becomes
meaningful.
* Move per_band data out of the common structure since it won't be
present in the new versions of the command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.8da29a66984f.I922bdef4740d990f98cb452e858c4157bbc491c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the firmware crashes, we first told the op_mode and only then,
changed the transport's state. This is a problem if the op_mode's
nic_error() handler needs to send a host command: it'll see that the
transport's state still reflects that the firmware is alive.
Today, this has no consequences since we set the STATUS_FW_ERROR bit and
that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording
looks at this bit to know not to send a host command for example.
To fix the hibernation, we needed to reset the firmware without having
an error and checking STATUS_FW_ERROR to see whether the firmware is
alive will no longer hold, so this change is necessary as well.
Change the flow a bit.
Change trans->state before calling the op_mode's nic_error() method and
check trans->state instead of STATUS_FW_ERROR. This will keep the
current behavior of iwl_fw_dbg_stop_restart_recording upon firmware
error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording
safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not
alive.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid
[I missed this was a dependency for the hibernation fix, changed
the commit message a bit accordingly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check size of WGDS revision 3 is equal to 8 entries size with some header,
but doesn't depend on the number of used entries. Check that used entries
are between min and max but allow more to be present than are used to fix
operation with some BIOSes that have such data.
Fixes: 97f8a3d161 ("iwlwifi: ACPI: support revision 3 WGDS tables")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.cc71dfc67ec3.Ic27ee15ac6128b275c210b6de88f2145bd83ca7b@changeid
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for activate/deactivate unii4 in USA, Canada and WW by
reading DSM function 8 from UEFI or ACPI and sending it to the FW.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703125541.674604cbb6d1.Ibb946ae8ce7a760940a3c9d101e7f4f1808c43e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix all the prototype mismatch and "wrong kernel-doc identifier"
warnings, due to typos in or misformatting of the kernel-doc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240625194805.6ec65cf9b88c.I7804114d7369f352e80a0e8430f7119af8e210de@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When UATS isn't enabled (no VLP/AFC AP support), we need to still
set the right bits in the channel/regulatory flags, so remove the
uats_enabled argument to the parsing etc.
Also, firmware deals just fine with getting the UATS table if it
supports the command even if the bits aren't set, so always send
it, since it's also needed if BIT(31) is set, but the driver need
not have any knowledge of that. Remove 'uats_enabled' entirely.
Fixes: 0d2fc8821a ("wifi: iwlwifi: nvm: parse the VLP/AFC bit from regulatory")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618195731.a81e7234c4f6.Ic0131180d38e0f1ead2f7fa0e7583407ceaa0bd1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is the first step towards removing the P2P Device MAC.
Use ROC (which uses the AUX MAC) for P2P Device
discoveribility and action frames.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.8c90e457abbd.I8e340759ecb299e05b1809f3d8060429c6cbbd01@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was needed when we had multiple types of transports. Now we only
have pcie, so there is no need for this ops.
Cleanup the code such as the different trans APIs will call the pcie
function directly, instead of calling the callback,
and remove struct iwl_trans_ops.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for enable/disable 11be for china and South Korea by
reading DSM function 12 from UEFI or ACPI and sending it to the FW.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.037613d03c87.I4e5ee63c0dbdd4bd6c48daee7b0c88462b702423@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In practice, iwl_trans_get_rxq_dma_data() will not fail,
it only can do that if called with the wrong arguments.
But it does have an error value and doesn't initialize
the argument when it fails, so don't use the value then.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.faf3a1b87589.I77c950173cb914676fbd28483e5ef420bb9f1bc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add new time point to get the details of scan failure
While on it added other missing enum to match with FW.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.6781e76990c4.Iadfb3f6dd63a98fc35019772266b5ebddc5b5270@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
fw_running assumes that memory can be retrieved only after alive.
This assumption is no longer true as we support dump before alive.
To avoid invalid access to the NIC, check that STATUS_DEVICE_ENABLED
bit in trans status is set before dumping instead of the prior check.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.ca07138cedeb.I090e31d3eaeb4ba19f5f84aba997ccd36927e9ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In prph_mac_iter, ensure that all required addresses are dumped
even if a read fails. Currently, if a read fails, the region dump
is stopped, preventing the creation of prph_mac.lst.
By dumping all addresses even if a read fails, we can accurately
determine which addresses were successfully read and which were not.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Eilon Rinat <eilon.rinat@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.31fa9ce91a1c.Ia0c86f70c7a6874c15ffc6f8235aa88530208546@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware has different names for this, which is confusing
as even the convention of having the firmware name in a comment
after the struct definition wasn't met here. Fix the naming,
but keep UATS in some of it since that's the BIOS name.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.b0dfe17d5f44.I8f5f5a831c7b934ce3140f838315827c018103bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When requested, the firmware can return per-channel survey information
generally used for ACS (automatic channel selection). Add the API for
this, which consists of a flag and a new channel survey notification.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.1facde532676.I3864ac4bc0fecb7fd5136e85c07585ab7100234b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Send AP_TX_POWER_CONSTRAINTS_CMD with no local maximum transmit
power constraint to FW and FW will update the TPE element with
required tx power limits.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240416134215.b6af4ecfcfe8.I07e8db349190e0c58c468c18477d8551288ac069@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for enable/disable 320 MHz for Japan and South Korea
by reading WBEM (WiFi Bandwidth Enablement per MCC) variable from
UEFI or ACPI and sending it to the FW.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.7946c3befbe1.I453c33f7ea48156ea2a3961f50a9003103fca5a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for enablement of PPAG for
- VLP for 6 GHz mode in CANADA, USA and ETSI countries.
- LPI for 6 GHz mode in CANADA.
- SP for 6 GHz mode in CANADA, USA and ETSI countries.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.e1893fe24ea3.Ic84cf576de0883c2184c939bdfad4b110a8a1815@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi as we didn't consider it
as major enough to justify merging wireless tree to wireless-next. But
Stephen has an example merge resolution which should help with fixing
the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYNIqIRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt8jAf9H+o91boD34/qVdI5LWEcFhVKEkHpNtwm
Y1sTKNBEtN1Gs2zcljjO6PqN9N4v2+lA42KSpzP5M42FfpI2aATI2v8jYsKTXOl2
YVwF+8pDiAsi0YtQTxIthygjzTpsePCfj8z0xJaKGm195T+fMm9UebYETrfxxOp/
z5StsJIPI0twgSLKKUWvLpX4ESt0l0HLJY1ok99sk4Cj36EKn6b9LbBinDKr6GcQ
mGNtPyq0j4l0kS5qae9BbXZUohO54o8wiFnApdwGfA7S/kLY7eUtwZy7T050b62P
zbNafwZbIjrH7dNcGfe6Fdr7PjQYFeI5Nh7dXxqM2LJOQsYXU/tcWQ==
=WrPE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a requirement from OEMs to support new bits in DSM function 7,
which will indicate enablement of 5.9 GHz in Canada.
Add support for this by reading those bits from BIOS and sending it to the
FW. mask unii4 allow bitmap based on LARI_CONFIG_CHANGE_CMD version
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.5c31ccd73119.I0363992efc3607368648d34a7918b2534150a3ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_fw_dbg_collect_sync() unconditionally accesses 'trig' at
the beginning of the function, even though the data has an
inner union and 'trig' isn't necessarily always used, it can
be 'desc' instead. Add comments clarifying why this is OK,
that 'trig'/'desc' must be first in the struct and how in it
the use of the union's sub-structs is differentiated.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.49c3a39737cc.I91c588e0d66b49f0ee9103e8d4a0e501c2fd36d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In version 4, in case of MLO GTK rekey during D3,
the firmware sends all the new keys, including
the keys on the non-active links.
Update also the non active link keys.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240311081938.6524de988ed3.Id065ddd2f4a71b0243c33ae0c5476ac41bfe2dc2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the dump_data (struct iwl_fwrt_dump_data) is a union,
it's not safe to unconditionally access and use the 'trig'
member, it might be 'desc' instead. Access it only if it's
known to be 'trig' rather than 'desc', i.e. if ini-debug
is present.
Cc: stable@vger.kernel.org
Fixes: 0eb50c674a ("iwlwifi: yoyo: send hcmd to fw after dump collection completes.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240319100755.e2976bc58b29.I72fbd6135b3623227de53d8a2bb82776066cb72b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The version 6 command adds the puncture mask to the PHY
context and is otherwise the same. Support that in the
API definitions, but don't fill it yet.
While at it, also mark the field as removed from the link
context command since it moved from there to PHY context.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.2156fca5b1a5.I57f47f26ec0d96ecfb1192039f72b1c6d4e8a357@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Those devices' fifos are numbered differently.
Because of that, we were looking at the size of the VO fifo size to
determine the size of the A-MSDU which led to a lower throughput.
Note that for those devices the only user of the AC -> fifo mapping is
the size limitation of A-MSDU.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.da336ca2fa0a.I73e44d5fc474ebb6f275b9008950e59c012f33b2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a conflict already and some upcoming changes
also depend on changes in wireless for being conflict-
free, so pull wireless in to make all that easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The #ifdef check around the function definition for two functions was
changed without also changing the one on the declaration:
drivers/net/wireless/intel/iwlwifi/fw/uefi.c:359:6: error: redefinition of 'iwl_uefi_get_sgom_table'
359 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/wireless/intel/iwlwifi/fw/uefi.c:11:
drivers/net/wireless/intel/iwlwifi/fw/uefi.h:294:6: note: previous definition of 'iwl_uefi_get_sgom_table' with type 'void(struct iwl_trans *, struct iwl_fw_runtime *)'
294 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans, struct iwl_fw_runtime *fwrt)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/fw/uefi.c:392:5: error: redefinition of 'iwl_uefi_get_uats_table'
392 | int iwl_uefi_get_uats_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/fw/uefi.h:299:5: note: previous definition of 'iwl_uefi_get_uats_table' with type 'int(struct iwl_trans *, struct iwl_fw_runtime *)'
299 | int iwl_uefi_get_uats_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
Adapt it by merging the declarations into the existing #ifdef block.
Fixes: 74f4cd7107 ("wifi: iwlwifi: take SGOM and UATS code out of ACPI ifdef")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/20240212112343.1148931-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newer firmware versions no longer needs this command. Don't send it if
the firmware advertises it does not need it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.527595995aa0.I0381bef1dc815945f2ec194fecc657e5c75bb2ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This image can be pretty big (I've seen order-7 allocations!),
and we later have to copy it to DMA memory (in newer FW even
there it won't need to be contiguous), so we can easily deal
with it being in vmalloc. Use kvmemdup()/kvfree() for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.9b4c06b5d533.Idf699b36ec95ee36f530355cd2cb1da297a098f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The BIOS tables SGOM and UATS are read from UEFI, but require
additional tables (WGDS and DSM func 3, respectively) which used to be
read from ACPI only, so the code handling those tables had to be under
ifdef ACPI. But now the driver reads those tables (WGDS and DSM) from
both ACPI and UEFI, so SGOM and UATS code shouldn't be under ifdef ACPI
anymore.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.dcaa3325773f.I649079c842369dcae3a362842322deca422a61d5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for
- PPAG revision 3 in BIOS to enable PPAG in UHB
- PPAG command version 5, this command allows OEM to control
enablement of PPAG for LPI for UHB mode in USA and ETSI countries.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.d17425824b11.If2c1b29e3c579f4135383681af2d625cfe2cffcd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is an error path and Smatch complains that "tbl_rev" is uninitialized
on this path. All the other functions follow this same patter where they
set the error code and goto out_free so that's probably what was intended
here as well.
Fixes: e8e10a37c5 ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/09900c01-6540-4a32-9451-563da0029cb6@moroto.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This saves the error as PTR_ERR(wifi_pkg). The problem is that
"wifi_pkg" is a valid pointer, not an error pointer. Set the error code
to -EINVAL instead.
Fixes: 2a8084147b ("iwlwifi: acpi: support reading and storing WRDS revision 1 and 2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/9620bb77-2d7c-4d76-b255-ad824ebf8e35@moroto.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some changes coming to wireless-next that will
otherwise cause conflicts, pull wireless in first to be
able to resolve that when applying the individual changes
rather than having to do merge resolution later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the system is compiled without CONFIG_DMI, the function
here statically returns NULL, leading to a compiler warning.
Catch that and print "<unknown>" in that case.
While at it, fix some indentation in the function.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402030641.zUTuACYV-lkp@intel.com/
Fixes: 09059c6764 ("wifi: iwlwifi: prepare for reading PPAG table from UEFI")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The user of this function passes a pointer to a value that
doesn't exist when compiled w/o CONFIG_ACPI. Since we don't
need the value then, make the non-ACPI version a macro to
allow it to still build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402031454.syX4cSGN-lkp@intel.com/
Fixes: c4c9545477 ("wifi: iwlwifi: implement WPFC ACPI table loading")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For each DSM function, try to first read it from the UEFI.
If the UEFI WIFI GUID is unclocked, or the DSM function in
UEFI is invalid/unavailable - read it from ACPI.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.27dd626ce2bd.Ib90bab74a9d56deb2362edb712294360e4ddae5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move all the common items (functions, enumerations and mcaros)
to regulatory.h/c files, and rename it to a common name.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.eae9bcbc0023.If1175f3143d6369076669ddd5d6ad4df0ee00659@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As DSMs are going to be read from UEFI too, we need a unified API
to get DSMs for both ACPI and UEFI.
The difference in getting DSM in each one of these methods (ACPI, UEFI)
is in the GUID, revision (0 for ACPI, 4 for UEFI), and size of the DSM
values (8 or 32 for ACPI, 32 for UEFI).
Therefore, change the iwl_acpi_get_dsm_x() to iwl_acpi_get_dsm() which
determines the GUID, revision (these two are the same for all WiFi DSMs),
and size (based on a func-to-size mapping) internally.
While at it, fix DSM_FUNC_RFI_CONFIG to expect a 32-bit value
(as defined in Intel BIOS spec) and not a 8-bit one.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.1bcd7072a7a5.I344ee0a11abbc27da0c693187d1b8bee653aaeef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These functions shouldn't be ACPI_CONFIG dependent, as they don't
access the ACPI. The functions that really access ACPI -
already handle the case that CONFIG_ACPI is not set.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.1412e6d561f8.I84f67478d01b576457e1bf489fbcb044adfda6fe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the ECKV table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI.
Change iwl_acpi_get_eckv() to receive fwrt as argument so
it will be the same as all iwl_acpi_get_x() functions,
so it could be generated by the macro.
While at it - move the reading of ECKV to INIT stage. There is no
reason to read it each time we load the FW.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.d4937cc00727.I36e5fc7f7850229b9b377c80b5203aa47137c97c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the WRDD table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI.
Change iwl_acpi_get_mcc() to receive fwrt as argument so
it will be the same as all iwl_acpi_get_x() functions,
so it could be generated by the macro.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.5d52eeb109f7.I4d81700a7ae7fe2dfee14e363de358be59de7823@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the SPLC table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.3d9d835b6edb.I7ea262df9431ced787b77c87149c6d7bddb7e7d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As the iwl_bios_get_x() functions are now generated using a macro,
and this macro requires the all iwl_acpi_get_x() to have the same
prototype, change iwl_acpi_get_pwr_limit() to return a int
and the actuall power limit will be filled in a pointer function
parameter.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240201155157.4cce81198afe.Ice8b1b97a68da9ec7b5a4799ddb668642198e1af@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the WTAS table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.45e6ff7b5063.Id3aec70887e14533b10d564f32c0cf5f2a14b792@changeid
[move uefi_tables_lock_status outside ifdef to fix build errors]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the TAS 'read-from-BIOS' flow receives the command struct
and the version of it as read from FW TLVs, and fills the command
accordingly.
This seems wrong, we should have the 'read-from-BIOS' flow
(iwl_acpi_get_tas in iwlwifi) reading/parsing/validating the table from
BIOS, and the 'send-to-FW' flow (iwl_mvm_tas_init) doing
all the FW versioning checks and cmd filling.
Move the cmd filling to the 'send-to-fw' flow.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.24df27772a71.I57b702af4feb3f38dc21d52593c25de4b1999e4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We are going to support reading BIOS tables from UEFI
too, Refactor the TAS table flow:
1. Rename and move the common code to the regulatory.h/c files.
2. Remove the IWL_TAS_BLOCK_LIST_MAX, as we can use IWL_WTAS_BLACK_LIST_MAX
instead.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.0c2197cf1feb.Ib0e83d5bd3f4d5cfa9c3d2925317ba49377d257f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Try to read the PPAG table from UEFI first,
and if the WIFI UEFI tables are unlocked or the
table doesn't exist - try to read it from ACPI
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.6516da09aec1.I0dcaf0b6d8857417ba1318467a28da5d0d7d7f27@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We used to check enablement/validity of the PPAG table while reading
it from BIOS.
For newer FWs this checks were offloaded, and the driver needs
to send the PPAG table anyway.
The desicion whether the table needs to be validated before sending it
is FW related and shouln't be in 'read-from-bios' flow.
Move it to 'send-to-fw' flow instead.
This will also help to avoid code duplication of checking validity in
both ACPI and UEFI caes.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.7043b4087dda.I5a189f9a349556b84a79597fe1e46ffa93664df9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As PPAG table is going to be read from UEFI, there are some
cleanups required:
Move functions/definitions that are common to both UEFI and ACPI to
regulatory.h/c.
In addition, rename the functions/macros names so it will be clear which
one is ACPI specific, and which is common for ACPI and UEFI.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.25623670b422.I8132af7517e4faf0ea8cbeb2efe9651edd319b98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1. The name of iwl_read_ppag_table is misleading, as this function only
fills the command structure from the previously read table. Rename it.
2. Don't initialize fwrt::ppag_flags to 0 as the entire fwrt is zeroed
in the INIT stage anyway.
3. Don't filter out the reserved bits from fwrt::ppag_flags when printing
it, as it is already done in 'read-from-bios' flow.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.48acf340e817.I810e457b80015c1931d96d3e13c849f0339723c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the regulatory tables will be read from UEFI, and
only if it doesn't exist - they will be read from ACPI.
Read SAR tables (WRDS, EWRD and WGDS) from UEFI.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.533b687e1efb.Icb316291e593c8d53f41fdea2d083367dc97e3c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver will support reading BIOS tables from UEFI
too. Refactor the SAR tables (WRDS, EWRD, WGDS) flows:
1. Move all the SAR logic/definitions that is common to both
UEFI and ACPI to a new file - regulatory.h/c.
2. Rename the relevant functions/definitions
so it will be clear which is ACPI specific and which is
for both ACPI and UEFI
3. Rename the function that copies the stored tables into the different
commands structures, so will be clear what these functions do.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.429a9baff34a.I040460348aa1b43609be3a317b86722d6be71c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver is supposed to read the PNVM from BIOS only for non-Intel
SKUs. For Intel SKUs the OEM ID will be 0.
Read BIOS PNVM only when a non-Intel SKU is indicated.
Fixes: b99e32cbfd ("wifi: iwlwifi: Take loading and setting of pnvm image out of parsing part")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240131091413.3625cf1223d3.Ieffda5f506713b1c979388dd7a0e1c1a0145cfca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the firmware has the necessary support, enable SPP A-MSDUs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.15e4570e471f.I87cf284d3b19bb9f5558f0f33afaace6d6492acb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We check this in code that'd be complicated to put under
ifdef (CONFIG_ACPI), so just always have 'uats_enabled'.
Fixes: 4a9bb5b4d9 ("wifi: iwlwifi: fw: Add support for UATS table in UHB")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240129211905.bdc5fb20f00a.I902d801d79873c5c9cd51cef8e8226e2acefe88d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EWRD ACPI table contains up to 3 additional sar profiles.
According to the BIOS spec, the table contains a n_profile
variable indicating how many additional profiles exist in the
table.
Currently we check that n_profiles is not <= 0.
But according to the BIOS spec, 0 is a valid value,
and it can't be < 0 anyway because we receive that from ACPI as
an unsigned integer.
Fixes: 39c1a9728f ("iwlwifi: refactor the SAR tables from mvm to acpi")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20240129211905.448ea2f40814.Iffd2aadf8e8693e6cb599bee0406a800a0c1e081@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
